text
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_NODE_STATE_CHANGE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed on a call to system manager to register to get node state change notification. It's an internal software fatal error. IS-IS process will abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAAD-3-INTERNAL
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected internal error occurred in the aaad.), (Recommended Action: Copy the error message and trace exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SERVER-7-NODE_NAME_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Failed to get the local node name from platform library.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-DIR_IO
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to open/create the directory), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-3-DBG_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An debug init/fractL call failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-7-DEBUG_STATUS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-COLD_RESTART
### Response:
(Severity: 7), (Category: HA), (Description: Due to too many contiguous failed restarts, sysmgr has requested that the process be restarted without checkpoint data.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TFTP_FS-3-ETIMEOUT_THRESHOLD
### Response:
(Severity: 3), (Category: IP), (Description: This message indicates that write to tftp was not completed successfully.), (Recommended Action: tftp_fs process retries for default number of times before timing out and aborting the write to tftp when it is not able to reach the tftp server. Please check the following options to recover from this situation 1> Connectivity to the remote tftp server. If ip connectivity isnot present tftp_fs wont be able to write 2> The number of retries in tftp_fs is configurable. The user can attempt to increase the number of retries and retry the command 3> If the above two options dont help, please please save the file to the disk on the router, compress it and then transfer the file to tftp server. If none of the options help Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-TCAM_PERR
### Response:
(Severity: 3), (Category: L2), (Description: A Parity error has occurred in a TCAM device.), (Recommended Action: *SH_CMD sh controllers pse qfp infrastructure tcam resource-manager error parity location <Fully qualified location specification>*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_PM_OIR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when any PM is OIR'ed from satellite.), (Recommended Action: Please reinsert the PM back in the satellite.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-SA_UP
### Response:
(Severity: 6), (Category: SECURITY), (Description: IKEv2 SA is established.), (Recommended Action: No Action Required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-ACCESS_CHECK
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server previously encountered an unexpected error while applying access configuration changes to a TTY. As a result it cannot allow future connection requests to be authorized.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-TYPE_LOOKUP
### Response:
(Severity: 3), (Category: MGBL), (Description: The process that is described by the node ID and job ID in this message sent a request for a stats type ID that cannot be handled. This will result in a failure to register for statistics collection.), (Recommended Action: Restarting the process described in this message will cause the request to be resent. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_TSF_SOT_MISS_ERROR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_TSF_SOT_MISS_ERROR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB_DEBUG-3-ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: This is a catch all error message. It usually means an uncorrectible problem), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-CONN_CONNID
### Response:
(Severity: 3), (Category: OS), (Description: Failed to get the connection id.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTS2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_PROXY-3-ERR_SYSDB_THREAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fabric proxy failed to create the sysdb thread during the initialization. The driver will be non-operational due to this error.), (Recommended Action: The Proxy will recover by restarting. Verify that the fabric proxy process will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-BAD_TOOLS_VERSION
### Response:
(Severity: 7), (Category: INSTALL), (Description: The tooling version does not match the installed package. The operation will not be able to proceed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC_PROC-6-INFO
### Response:
(Severity: 6), (Category: SERVICES), (Description: The system is in normal state. This is info log.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-POLICY_TOO_BIG
### Response:
(Severity: 7), (Category: ROUTING), (Description: The policy named is very long and/or complex, and in compiling it for execution, the policy repository exhausted resource limits. This was not detected by the usual checks at configuration verification time. Rather than crash, the policy repository is left with the previous configuration for this policy, if any.), (Recommended Action: Rollback the configuration operation to regain consistency between the running configuration and the policy respoitory. Then, rewrite the policy in question in a simpler form. It may help to make use of policies with parameters to reduce the total policy size. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-5-SVC_NOTICE
### Response:
(Severity: 5), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBC-2-CANBUS_BOTH_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: CBC detected both CANBUS A and CANBUS B have failed. This may be a serious hardware failure.), (Recommended Action: Reboot the LC. If the problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Null Driver partner encountered a error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-SHMWIN_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A fatal error was encountered during initialization.), (Recommended Action: If the process does not restart automatically then try manually restarting it. A likely cause for this error is that the system has run out of memory. If this is not an out-of-memory problem and restarting the process does not solve it then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LOW_VOLTAGE_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ voltage less than or equal to the low voltage alarm threshold. The QSFP+ is the pluggable optics on the line cards. The voltage threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-3-UNCORR_INT_MCH_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An uncorrectable has occurred in the MCH (Memory Controller Hub) of the Linecard's CPU complex. The message will display the name, description, and error log. The linecard will reload after a certain threshold of number of occurances have been reached.), (Recommended Action: Contact support with the required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_SERDES-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in Serdes layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. The failure indicates the Serdes device configuration failed.), (Recommended Action: Please attempt to correct the error by reloading the card by issuing the command in admin mode -reload location <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-BAG
### Response:
(Severity: 3), (Category: OS), (Description: An internal bag function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HW_MODULE_PATCHCORD-6-PC_DELETE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Logical Patchcord has been successfully deleted. This log message is needed to trigger EPNM reactive inventory about logical patchcord deletion.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_LINK_ATTACHED
### Response:
(Severity: 4), (Category: L2), (Description: This process believes that there are no aggregatable links, but this link is marked as attached. This error is most likely caused by failing to attach or detach a link correctly.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-ASYNC_GET_CLIENT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Unable to process the cilent start header over the control ethernet. This could lead to failure in sending the data over the control ethernet to a remote node.), (Recommended Action: If message appears only once, then no action is required. Packets will be retransmitted and system should recover automatically. If message appears continuously, then it could indicate a problem with the control-ethernet. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-CORE_WATCH_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Add of CORE_DUMP_LOCATION directory to monitored directory list failed with specified error.), (Recommended Action: Check dumper process, show context, collect console message. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-4-INTERNALERR
### Response:
(Severity: 4), (Category: INSTALL), (Description: An internal software error occurred.), (Recommended Action: An internal software error occurred while getting details about the install operation. This internal error will be recovered automatically. Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-PACKAGE_LOCATION_LICENSE_INVALID
### Response:
(Severity: 4), (Category: LICENSE), (Description: A feature configuration was done on a location without a valid license), (Recommended Action: Puchase the package license for the location)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_RETRY_EXCEED_GSP
### Response:
(Severity: 4), (Category: L2), (Description: After attempting to create the GSP group used for communications with the Bundle Manager process on another node a number of times, the retry limit has been exceeded. The cause of the failure is very likely to be some external communication failure - so check for evidence of this. The process will exit and be restarted automatically so no futher action is needed for Bundle Manager to retry.), (Recommended Action: Check that other processes are not reporting similar communication errors, as this is likely to be a general communication problem. The Bundle Manager process has exited and will be restarted, so no action is needed, though unless the communication problem is resolved the process will still not be able to startup.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-4-MISSING_AUTHENTICATION_LIST
### Response:
(Severity: 4), (Category: L2), (Description: One or more PPP interfaces have been configured to authenticate the peer using the authentication list identified in the error message, but this authentication list has not been configured in AAA itself. As a result PPP will be unable to authenticate the peer and the line protocol on the relevant interface or interfaces will not come up.), (Recommended Action: Configure 'aaa authentication ppp <listname> ...')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-REPROGRAM_POLICERS
### Response:
(Severity: 4), (Category: OS), (Description: It failed to reprogram a flow policer when it had received a request to reprogram all flow policers to HW.When this issue happens, it will trigger an automatic restart.), (Recommended Action: Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB_MAIN-3-SYSDB_LIST_FREE_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to free a list while getting the sysdb inventory), (Recommended Action: Search the event logs for events/errors related to the failure reason. Sysdb is part of overall system. If there are failures here, then other processes may also exhibit similar problems.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-SENT_NOTIF_BADHOLDTIME
### Response:
(Severity: 5), (Category: ROUTING), (Description: A BGP notification message of unacceptable hold time has been sent.), (Recommended Action: This message is info only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUBS_AIPC_UTIL-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: SUBSCRIBER), (Description: Printd when Subscriber aipc util or its clients fail to initialize necessary data structures and memories. If the error originates from the system call the error message is also printed. The process cannot proceed without this module initialization.), (Recommended Action: The sysmgr will retry to start the process. If it cannot be restarted it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ECM_OPEN
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemaon was unable to open ecm.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ORA_INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_OVR_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA11 burst FIFO overflow error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-3-CONFIG_LOCAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The set of primary or secondary VLANs on a bundle interface of the iccp-group does not match the secondary or primary set of VLANs for the same bundle interface on the other member of the redundancy group.), (Recommended Action: Verify the configuration under l2vpn redundancy. Ensure that the primary and secondary set of VLANs for a specific bundle interface is the reciprocal of the primary and secondary set of VLANs on the same bundle interface on the other member of the redundancy group.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-SERIAL_ID_NULL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Once ROMMON 1.22 is rolled out, all multi-chassis testbeds should upgrade to it to avoid problems of more than one RP getting the same rack number assigned. This msg warns the operator that an RP was detected that had older ROMMON and should be upgraded ASAP.), (Recommended Action: Upgrade the ROMMON to ver 1.32 or more Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-ADD_ENCAP
### Response:
(Severity: 3), (Category: IP), (Description: Failed to add pre-switch and pre-route caps to FINT), (Recommended Action: Restarting ipv6_io may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-PORT_EXCEEDS_MAX
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The port number must not exceed UINT16_MAX.), (Recommended Action: Check the port number of the interface in XR_INTERFACES.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-OFFLOAD_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current offload profile and the newly configured offload profile. Needs attention with LC reload.), (Recommended Action: System LC is inconsistent. Need to reload the LC in order to activate the new mpls profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-RX_ALARM_LOF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected OOF defect for incoming signal. For T1 mode OOF is declared when out of every four frame bits two or more frame bits are received in error. For E1 mode OOF is declared when three consecutive incorrect FAS is received. Also for E1 mode(CRC-4 framing) OOF can be declared when 915 or more CRC blocks out of 1000 are received in error. Additionally for E1 mode(CAS signalling) OOF can be declared when two consecutive multiframe alignment words are received in error or, for a period of one multiframe, all bits in timeslot 16 are zero.), (Recommended Action: 1) Ensure framing format on port matches framing format on the line. 2) Configure to other framing format to check if error clears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-5-MTU_NEGOTIATED
### Response:
(Severity: 5), (Category: L2), (Description: The PPP MTU is reduced when the PPP MRU of the peer is less than the PPP MTU derived from the locally configured interface MTU. The reduced value will be used until LCP is renegotated (such as when the interface goes down and comes back up, or a new MTU is configured), or if the PPP encapsulation is removed from the interface. The MTU then returns to the configured value and another message will indicate if a value less than the configured value is negotiated again. The reduced MTU is a normal part of PPP operation and is not indicative of any problems.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_DETAILS
### Response:
(Severity: 3), (Category: SECURITY), (Description: Client address, error, error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_6_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-DSP_LINE_TX_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No line lock between the NPU and DSP), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-LSP_OOR_GREEN_TRANSITION_TIMER
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_ILMI-2-IM_MSG
### Response:
(Severity: 2), (Category: L2), (Description: Error in IM(Interface Manager) operation first %s - Type of the failure second %s - Interface/PVC which failed the lookup This error happens on an LC with ATM interfaces.), (Recommended Action: Check if the interface or pvc exists and retry the operation. Collect required_info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fabricq ASIC is reset due to the reason displayed in the message. Most often the situation recovers after ASIC reset. If the resets persists, contact technical support with the following information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-OPTICS_LINE_RATE_UNSUPPORTED
### Response:
(Severity: 3), (Category: L2), (Description: Optics unable to support configured line-rate; replace optics OR change configuration.), (Recommended Action: Replace optics OR change configuration)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-XAUI_0_FRAG_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XAUI interface to NPU-0 reported fragmentation error on TX side on bridge instance - 0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-NONEIGHBOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPF hello, database description, or database request packet was received, but the router could not identify the sender. This is a normal occurrance if a link flap occurs on the router receiving the packet.), (Recommended Action: This situation should correct itself. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-CHECKSUM_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: A checksum of a record is wrong. The file could be corrupted. The file should be saved to other place for later debugging, and then it should be removed to recover current situation.), (Recommended Action: The file should be saved to other place for later debugging, and then it should be removed to recover current situation. Please clear the OBFL files, as it might be because of corrupted records. CLI : admin clear logging onboard corrupted-files location <LOC> If the issue is seen after clearing the files, please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-COMMENT_LIMIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Multiple lines of comments associated for a command is considered as a single (multiline) comment for that command and the total length of all the comments would be considered as the total length of the comment associated to that command. Any comments beyond this limit will be discarded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP-7-INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: The HTTP Server has encountered internal error conditions or this point in the code should not have been reached. The HTTP process may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1_LNM-5-ENABLED
### Response:
(Severity: 5), (Category: L2), (Description: Link Noise Monitoring has been enabled for the warning level and T1/E1 controller specified in the message.), (Recommended Action: This is an information message to notify that Link Noise Monitoring has been enabled on the T1/E1 controller identified in the message. No user action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-EA_SCOL_INIT_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: Statsd registration failed. QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.), (Recommended Action: Restart QoS EA process Get JID from 'show processes qos ea location <>' 'process restart JID location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-SYSDBOPERATION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The sysdb find data operation failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPP-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-MARTIAN
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified LSP contains a prefix advertisement to an invalid martian prefix and the prefix has been ignored. As the prefix is invalid there should be no impact to routing as no traffic should be destined to the prefix. This message is however indicative of a problem in the router which issued the LSP as it should not have advertised such a prefix.), (Recommended Action: Identify the source of the offending packet and correct it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-INTERRUPT_ATTACH_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Interrupt attach has failed , this may be a program level error), (Recommended Action: Please contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-3-EVM_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The rpl multi-version coordinator was unable to obtain the event handler. This handle is required for all base level communitions with the rest of the system, so the coordinator was shutdown so sysmanger could attempt to restart.), (Recommended Action: This error message may be transient. Restart policy_repository and try the use case again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_AIB_ADJ
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) failed to add or delete an adjacency in the Adjacency Information Base (AIB). This is normally a transient problem arising from temporary unavailability of the AIB process (aib), and corrects itself when aib returns to normal operation. Correct operation can be confirmed by checking that there is a matching AIB entry for each ND cache entry.), (Recommended Action: Confirm that updates in ND are reflected in AIB: <CmdBold>show ipv6 neighbor [location node-id]<noCmdBold> <CmdBold>show adjacency ipv6 [location node-id]<noCmdBold> Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: ROUTING), (Description: The process failed to allocate memory for the specified resource. This could be because the topology is too large for the memory installed in the router.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR1_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-1 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_0_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CHECKPOINT_ALLOC_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checkpointing is a mechanism to update the redundant RSP with the current configuration and status of the system to help takeover in case of a failover. The checkpoint mechanism needs to be initialized for Sync-controller to update the standby RSP with current frequency syncronization status. This failure could be because of memory allocation failure.), (Recommended Action: * REDUCE *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-DATA_XFER_ERR
### Response:
(Severity: 3), (Category: IP), (Description: A software entity is unable to transfer data to/from the internal control ethernet server. This may be caused by momentary unavailability of internal buffers to the ethernet server, which will recover by itself; or, the ethernet server is inresponsive. This is a n error message that should only occur infrequently.), (Recommended Action: If the message appears only once, then no action is required. Packets will be retransmitted and system should recover automatically. If message appears continuously, then it could indicate a problem with the control-ethernet.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-6-UPD_GEN_RECOVERY
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-6-DISC_LIMIT
### Response:
(Severity: 6), (Category: MGBL), (Description: Discovered PE targets has exceeded the maximum number.), (Recommended Action: Dicrease PEs in a topology or stop ipsla mpls-lsp-monitor which are not required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-6-OTHER_LIBRARY_ERROR
### Response:
(Severity: 6), (Category: OS), (Description: Error in other library), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-DLINK
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBJ_MGR-3-INIT
### Response:
(Severity: 3), (Category: APP_INFRA), (Description: When 'object group' configuration is first added, the OBJ Manager (obj_mgr) process starts and initializes. Something has failed in this proceedure and may prevent OBJ Manager from functioning.), (Recommended Action: Allow OBJ Manager to restart. You can further remove and re-add 'object group' configuration. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-4-CLIENT_REPLY_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: The Linux Packet Classifier received a message from the xlncd client process, but was unable to send a response. The xlncd client process may remain blocked waiting for a response.), (Recommended Action: The Linux Packet Classifier and xlncd are required for successful operation of the Linux datapath. If Linux datapath operation is important, and problems are seen, then first try restarting xlncd. If problems persist, try restarting spp, but note that both XR and Linux traffic will be affected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-2-BIST_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar driver detected ASIC BIST failure.), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-LOST_CONNECTIVITY
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This node has lost connectivity via ethernet with the mentioned node id. An attempt is being made (at the time of this msg) to connect via fabric to the node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-6-MBIST_STATUS_INFO_PASSED
### Response:
(Severity: 6), (Category: FABRIC), (Description: MBIST test completed successfully. Board will reload to resume normal operations.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-3-MEM_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to allocate memory from heap.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_RETRY_EXCEED_IMP
### Response:
(Severity: 4), (Category: L2), (Description: The maximum number of attempts to retry an IMP message has been exceeded. An error has occurred in the clean up of a bundle, so there may be residual data for the bundle in the linecard components which could cause subsequent problems. Restart the process that reported the error to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-7-CONFIG_WRITE
### Response:
(Severity: 7), (Category: OS), (Description: A MB command is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMON-0-LC_HEADLESS_ACT_RSP_HB_REQ_FAILURE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This LC has timed out waiting for Heartbeat requests from the active RSP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM_TEST-3-ERROR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: vkg_pm_test encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.), (Recommended Action: This is just test software which the customer does not get.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-STANDBY_OPEN_TIMEOUT
### Response:
(Severity: 7), (Category: HA), (Description: Multiple attempts to open the messasge channel to the standby node (either the application itself or the checkpoint proxy) failed due to either the proxy not running on the standby or the application itself not running on the standby. If the application should run on the standby, then it must call chkpt_init() in order for mirroring to succeed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-PHY_CLOCK
### Response:
(Severity: 4), (Category: L2), (Description: The PHY device experienced a distributed clocking failure which resulted in a link flap. A reset of the PHY device corrected the issue.), (Recommended Action: Software corrected the issue by power cycling the PHY device. If any loopbacks have been configured on the port, they may need to be re-configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-LOCAL_ADDRESS_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to allocate IP address for client.), (Recommended Action: 'Make sure ip local pool is defined and has at least one free address ('show local pool'), also make sure that the specific pool is assigned to the proper ISAKMP profile ('show crypto isakmp profile'), otherwise contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. with the exact log message received.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP Routing Policy Language (RPL) on IOS-XR?
### Response:
The Routing Policy Language on IOS-XR is used to define routing policies to filter and modify BGP path attributes. It provides a rich and flexible policy definition language. RPL policies are defined separately from the BGP process and applied using the route-policy command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_16P_OC48-6-GENERIC_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message is used to report generic info.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_ECD-6-INFO_STR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-4-FROM_MRID_UPDATE_GLACIAL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-TCAM_FMT_TO_HFA_MAP
### Response:
(Severity: 3), (Category: OS), (Description: An tcam format to hfa mapping function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-DF_ELECTION_COMPLETED
### Response:
(Severity: 5), (Category: L2), (Description: EVPN: Designated Forwarder election completion indicator. DF election has been calculated based on the number of nexthops present at the close of the 3 second peering window.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IFMGR
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified interface manager request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-4-BAD_PACKET
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: NetIO received a bad packet from the driver (or from an application) that had no particle data in it. NetIO drops these packets. If too many such packets belonging to a routing protocol are received and dropped, we have a potential possibility of an adjancency flap.), (Recommended Action: If no side effects are observed nothing needs to be done and NetIO would just drop these packets and continue with its normal operation. If this message is seen many number of times, it indicates some sort of issue in the driver sending packets to NetIO and the driver needs to be analysed further, in that case Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SW_OFFLOAD-4-PROTOCOL_UPDATE_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An error was encountered while attempting to set up protocol sessions. Affected protocols may operate incorrectly or not at all.), (Recommended Action: The system has already made repeated attempts to correct the problem automatically but without success. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option dynamic feature?
### Response:
The MPLS TE path-option dynamic feature allows MPLS TE tunnels to be routed dynamically by the MPLS TE software, using a path calculation algorithm that considers the tunnel's constraints and attributes. Dynamic path-options do not require an explicit path to be configured. They provide flexibility in path selection.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-4-SET_HEARTBEAT_PRIORITY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unable to set the heartbeat pulse of this node to high priority. Proceeding with default priority, however in a high CPU consumption, this node's heartbeat pulse may get lost, causing this node to get reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-RSP_MIXED_MEMORY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An RSP with different memory configuration is detected. This resulted in RSP mixed memory condition in the system. Running the system in this condition is not recommended.), (Recommended Action: Please correct the condition by replacing the RSP with the same memory configuration. RSP memory configuration can be view via 'show platform' CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-INVALID_NETLINK_MESSAGE
### Response:
(Severity: 4), (Category: INFRA), (Description: A Netlink message was received with mismatching header and message contents. This may suggest the message was truncated.), (Recommended Action: If the problem persists, restart the process. If the problem persists through process restarts, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-DEV_XFP_COMPLIANCE_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A compliance error was detected during XFP initialization. A compliance error is due to unsupported optics, checksum error, EEPROM CRC error, vendor data error, or decryption error. The XFP is the pluggable optics on the line cards. XFP initialization may happen when linecard boots up, XFP OIR and line card process restart. The optics will not be enabled if an XFP compliance error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the XFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-I2C_BUS_HANG_RECOVERY_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The attempt to recover from the I2C bus hang condition by CCC driver has failed.), (Recommended Action: Use hw-module location reload command to recover from this.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OUNI-6-CONNECTION_DESTROYED
### Response:
(Severity: 6), (Category: ROUTING), (Description: A connection was destroyed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT-3-INTF_RETURNED_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Results collection for an interface has failed.), (Recommended Action: The reason for the error must be looked into.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC14
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-CHAN_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to create lc_fpd_upgrade (driver) channel using event_manager_create. An error occured in fpd proceses, to creae event manager which causes a channel to be created. This might involve exiting the upgrade_fpd or lc_upgrade_fpd process. Some features like 'upgrade hw-module fpd' may not work if this error is seen.), (Recommended Action: First try to restart the process ( upgrade_fpd or lc_upgrade_fpd) and check if the problem is recovered. If not switchover RP or reboot the router either manually or via Command line. If that too fails call Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-3-BAD_PMLIB_SERVER_CONTEXT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Platform Manager detected a software error where the received library server context does not match the expected value.), (Recommended Action: No action is required as the software has rejected the transaction request. Please collect the error message, traceback and 'show log')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTQ3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-6-CONFIG_SCRIPT_CALLBACK_EXECUTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_9_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-5-CFP_OIR
### Response:
(Severity: 5), (Category: L2), (Description: The Optic Module (CFP) for the specified port has either been inserted or removed. %s - either 'inserted' or 'removed' %d - port number.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_CORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory correctable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_MIN_PDU_LENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The length (PDU_LENGTH) described in the PDUTYPE header is smaller than the minimum (MINLEN) from SOURCE_IF This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-BAD_GRP_DELETE
### Response:
(Severity: 3), (Category: OS), (Description: 'This GSP group can not be deleted since some of the members still exist within the group. The remaining members are required to leave the group before it can be deleted.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-SOFT_ERROR_ALERT_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 2.), (Recommended Action: Please reload the board in the next maintenance window. Until then affected ports will be down. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-4-WARN_TRAFFIC_SLAVE
### Response:
(Severity: 4), (Category: IP), (Description: The peer VRRP router has mismatching configuration. The group which is configured as a slave on the router on which this message is seen may be configured as a standard non-slave VRRP virtual router on the peer.), (Recommended Action: Check the VRRP configuration for this VRID on the peer device(s). Both VRRP virtual routers must be operating in the same mode: either regular or slave.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-PKGMGR_WARNING
### Response:
(Severity: 4), (Category: INFRA), (Description: The package manager has reported a warning condition while running.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-lsp_verify_peer_absent
### Response:
(Severity: 3), (Category: OS), (Description: Unable to verify LSP due to absense of Peer), (Recommended Action: Check peer address specified in EXEC CLI)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-4-LINK_SHUT
### Response:
(Severity: 4), (Category: FABRIC), (Description: One or more errors exceeded their threshold on this link. Five or more resets of the links did not fix the issue. The link has been shut down in hardware. Link recovery attempts will resume after OIR of the card at either end of the link, ASIC reset, driver restart, or router reload.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-INIT_RETRY
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process attempts to retry one of its initialization tasks with a network layer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-NODEID_TO_ETHER_IPADDR_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Unable to derive the IP address for the server from the nodeid. The CE-TFTP process will exit and respawn itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-SUBAGT
### Response:
(Severity: 3), (Category: SNMP), (Description: Error indicating that one of the SNMP Sub-Agent could get initialized.), (Recommended Action: Check 'show snmp sub-agent' , if noticed any sub-agent not in the list. Restart sub-agent process and check the running subagent process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-EXTRACT_IDPROM_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MPA manager was not able to extract inventory info from the IDPROM data of the module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_AIS_DEMA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-6-DEBUG_SHMWINID
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an info message in the RDM lib to indicate that it may have failed at some check or representing the code flow), (Recommended Action: If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show tech rdm - show tech npu)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install boot-options command in IOS XR?
### Response:
The 'install boot-options' command is used to modify the boot options for the next router reload. It allows specifying the image to boot from and other boot-related parameters.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFG_RESTORE-3-CONFIG_MIGRATION_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: cXR to eXR converted config apply fail while migration.), (Recommended Action: Check cfg_restore ctrace. Check config file present in /eusbb/.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_PRE_FEC_BER_HIGH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-GET_DEV_INFO_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Device info failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-LOSS_TIMER_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while restarting the loss timer for the peer MEP specified in the error message. This could cause the peer MEP to incorrectly be timed out some time later.), (Recommended Action: If the error persists and peer MEPs continually flap as a result, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-TREEWALK_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Core dump failed because the sparse tree processing failed.), (Recommended Action: Collect the following data and raise DDTS. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between an ABR and ASBR in OSPF?
### Response:
An Area Border Router (ABR) has interfaces in multiple areas including the backbone area. It runs separate copies of the OSPF algorithm for each area. An Autonomous System Border Router (ASBR) exchanges routing information with routers in other autonomous systems. It redistributes external routes into OSPF.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-3-FGID_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric server running on context node failed to unregister itself with the FGID Controller while node is going down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-ALLOC_VIRT_INST_RCS
### Response:
(Severity: 3), (Category: OS), (Description: A memory allocation request failed to allocate a data structure required to activate the virtual service.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-3-PTHREAD
### Response:
(Severity: 3), (Category: OS), (Description: A pthread operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_LOCK_FATAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected fatal error occured when trying operate on a pthread lock.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-3-ACL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A non-existent ACL was detected in the Platform SPAN module.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-4-SHMEM_QUEUE_MISMATCH
### Response:
(Severity: 4), (Category: OS), (Description: The Packet Classifier NetIO plugin hit an error when attempting to map in the shared memory queue. This could indicate a version mismatch, e.g. during software upgrade.), (Recommended Action: The problem should be resolved if SPP is restarted, e.g. as part of software upgrade.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-RX_SECURE_CHANNEL_TERMINATED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support service level agreements (SLAs)?
### Response:
Cisco IOS XR supports SLAs through IP Service Level Agreements (IP SLAs), allowing for the measurement of network performance metrics to ensure compliance with agreed service levels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-UPDATE_CHASSIS_PROM
### Response:
(Severity: 4), (Category: DRIVER), (Description: Virtual Interface Mac pool start/end address has been configured in Chassis prom. This will provide the Mac addresses required in XR VM.), (Recommended Action: Use idprom_tool to upgrade the backplane IDPROM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-ERR_ASIC_FCRAM_ASSERT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Ingressq encountered an assert error in the FCRAM. The driver triggers a device reset. The device should be reinitialized.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SUSPENSION_REQUESTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-4-OIR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: 'The power-module has either been pulled/inserted.'), (Recommended Action: 'Verify if the power-module has been plugged/removed.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-SYSDB
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred related to SysDB or in one of the verify/apply/notify SysDB callback functions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-3-AUTH_SIGN_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: With IKEv2 certificate authentication, sender(initiator/responder) needs to sign the AUTH DATA using the private key corresponding to the leaf certificate from the trust_point configured under ikev2 profile, this error will be printed when if RSA key pair is not configured under trustpoint or failed to sign the auth payload), (Recommended Action: Configure a valid trustpoint with rsa keypair label attached to it)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-EVENT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some error occured in event/event manager/event connection operations. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_FEAT_EA_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize Feature EA DLL API needed for programming of hardware resources), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR_ERR-3-ERR_STR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Crossbar driver encountered an Error in operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-2-MUTEX_REVIVAL_FAILED
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: The packet subsystem failed to revive the packet mutex.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_OPTICAL_PWR_OVERLOAD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_RIB
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an unexpected error whilst performing the specified RIB operation. This may be a resource starvation problem but is most likely to be an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-EVM_CREATE
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure has occurred during creation of a new event manager as part of initialization of SVI infrastructure. This resulted in the restart of the process.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-RETIRED_PIE_FORMAT
### Response:
(Severity: 7), (Category: INSTALL), (Description: PIE file is in an obsolete format.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_INVALID_CB
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA received an invalid callback from another process. The error message describes why it is invalid. This is most likely to be a programming error, either in PPPoE or in one of the processes it interacts with.), (Recommended Action: PPPoE MA should recover by itself.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_STORM-3-SC_MODIFY_ERR_IFH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to program storm control as it is conflicting with an existing AC), (Recommended Action: Remove storm control config on this sub-interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMW-5-LOW_CONTAINER_MEM
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The amount of free memory (RAM) is low in the Moonshine container.), (Recommended Action: Consider raising the container memory limit using a Moonshine config file. See https://confluence-eng-sjc1.cisco.com/conf/display/ENXR/Moonshine+Config+Files)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-6-INFO
### Response:
(Severity: 6), (Category: OS), (Description: --), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-FLASH_WP_DISABLED
### Response:
(Severity: 4), (Category: DRIVER), (Description: The DIP switch setting of card is at a position that is disabling the IOFPGA bootflash write protection. This is a safety feature to prevent unintended corruption of backup images in the bootflash during FPD upgrade.), (Recommended Action: Enable back the write protection to IOFPGA bootflash.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-3-ERR_INFO_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-3-SRC_PORT_EXCEEDED_PER_SESSION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Number of source per session supported is 100.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP downstream on demand feature?
### Response:
The MPLS LDP downstream on demand feature is an LDP label advertisement mode in which a downstream router advertises a label to an upstream router only when it is needed to forward traffic. This is more scalable than unsolicited downstream mode. It is enabled with the mpls ldp downstream-on-demand command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-NODEID_DECODE_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: An error happened for a nodeid decoding.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between a designated router (DR) and backup designated router (BDR) in OSPF?
### Response:
On multi-access networks (e.g. Ethernet), OSPF elects a DR and BDR. The DR is responsible for generating LSAs for the network and flooding them to other routers. The BDR is a hot standby for the DR. All other routers are DROTHERs and form adjacencies with the DR and BDR.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HM-4-FPING_RETRY_FAILED
### Response:
(Severity: 4), (Category: HA), (Description: HA Health Monitor Fabric ping failed but will retry again), (Recommended Action: No action is required because HA Health Monitor will retry Fabric ping again)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Tx power greater than or equal to the high Tx power warning threshold. The SFP is the pluggable optics on the line cards. The Tx power threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Replace the SFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-MSG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while handling messages received by tacacsd.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT1_ERR_CMD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an erroneous command on the HT1 HTDP interface. This means that the HT host core has received an HT Flush, Fence, or Broadcast packet. These packets are not supported and behavior is undefined after this type of packet is received. Note: CPP does not generate these commands.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IDPROM_PARSER-3-GET_FIELD_DATA_FAILED
### Response:
(Severity: 3), (Category: LIB), (Description: Failed to parse field data from raw idprom data), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Required functionality failed or returned an error), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_MTA_FRM_RPT_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX encountered Rx serdes lane metaframe repeat error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BAG-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: An internal error has occurred in the bag library. Some management functions may not operate correctly.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-COND_OP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure of an operation on condition variable.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-3-SYSDB_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Sysdb api call failed.), (Recommended Action: Please collect the output of the following commands: - show tech-support lpts - show tech-support sysdb - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-EVENT_MGR
### Response:
(Severity: 3), (Category: MGBL), (Description: An Event Manager operation carried out by the HTTP ENA filesystem handler returned unexpected results. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-ERR_PLUGIN
### Response:
(Severity: 3), (Category: L2), (Description: The operation on SPA object failed. The SPA driver controls all the hardware on the SPA. If the operation on SPA fails, the SPA may not be able to boot or work properly, and the traffic may be affected. %s - error message indicating location and the reason of the error), (Recommended Action: The SPA infra will automatically restart the SPA driver up to a fixed number of times if the failure happens during SPA is booting. If the failure doesn't happen with SPA booting, manually SPA reload may be needed. Execute 'show platform' to verify the SPA is in READY state, if not, try to reload the SPA with command: hw-module subslot 0/x/x reload or if the system has no response to the command above, force to reload the SPA with follwoing sequence under config mode: hw-module subslot 0/x/x shutdown commit no hw-module subslot 0/x/x shutdown commit If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_OUTR_VLAN_SES_THRESHLD_EXCD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Outer VLAN on the given access interface has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-3-DEFAULT_INTF_CREATION_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: A failure occurred when attempting to create a default interface (i.e. fwdintf or fwd_ew) in the TPA system for the specified vrf. Forwarding for TPA applications (including telemetry) will likely be impacted.), (Recommended Action: Restarting the kim process or unconfiguring and reconfiguring the VRF may be sufficient to recover. A switchover or router reload may be required if this condition persists. This error condition may sometimes be worked around by configuring the VRF to use the 'mgmt' default route. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD encountered a memory allocation failure error), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-2-SPA_FPGA_SW_REV_MISMATCH
### Response:
(Severity: 2), (Category: L2), (Description: The FPGA software revision is different with the one supported by the running software, this could be caused by software upgrade which supports the new FPGA software revision.), (Recommended Action: Upgrade the FPGA with FPD CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_DB_CREATE_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: The Firewall Controller has been informed of the existence of a new interface or firewall, but attempts to create an entry for it in the relevant database have failed. The most likely cause of this problem is a lack of memory. This will have left the system in an inconsistent state.), (Recommended Action: Try to add memory or free up some by removing configuration. Restart the Firewall Controller process using the 'prcoess restart' mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-INTERFACE_STATS_REG_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Packet Classifier has not been able to register as contributor to the interface statistics of a Management Interface.), (Recommended Action: The problem should resolve automatically by process restart, which is triggered as part of the error handling flow. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRIVER_LITE-3-ERR_DRIVER_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (sfe_drvr_lite) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-7-ERR_SEND_EGRESS_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Cannot send packet to pdma queue %s - error description %x - QAD queue id %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %x - error code), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBFA-4-INIT_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The client library failed to initialize the module specified in the error message above.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace all loc <slot number>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-4-ACCT_TIMEOUT_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Failed to send an accounting record to RADIUS or TACACS+ server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-QUEUE_GROUP_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Egressq Group/Queue creation/ deletion failed.), (Recommended Action: No action is required. Clients will automatically retry to connect to Egressq. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOPMGR-2-MALLOC_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An explanation is provided in the syslog.), (Recommended Action: A user should be able to tell what went wrong and take actions accordingly. For instance, if the system runs out of memory then more memory needs to be installed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Install Manager subsystem in IOS XR?
### Response:
The Install Manager subsystem controls the booting process on each node in an IOS XR system. It determines the proper packages that need to be loaded on each node. Install Manager provides the CLI commands for users to perform install-related operations such as fresh installation, image upgrade/downgrade, adding/activating packages, and more.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-TX_INSTALL_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: TxSA/TxSC programming has failed. As recovery, session would be bought down on this interface, followed by session bringup. Traffic hit expected.), (Recommended Action: contact cisco-support by sharing the tech-support macsec.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-ISSU_GO_ACTIVE
### Response:
(Severity: 6), (Category: INSTALL), (Description: During ISSU operation node received node role change notification .Node will change to active.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you monitor EEM reliability metrics in Cisco IOS XR?
### Response:
EEM reliability metrics in Cisco IOS XR can be monitored using the 'show event manager metric' command. This command displays information about the EEM system, including policy execution counts, success rates, and failure reasons.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-MEMORY_RECOVERY_KILL_NON_PROCESSMGR
### Response:
(Severity: 6), (Category: HA), (Description: The process with the indicated name and pid has been killed in an attempt to recover system memory. Since this process is not managed by processmgr, it may not be restarted. The process can be manually restarted if desired, but may continue to consume large amounts of memory.), (Recommended Action: The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-BAD_FPGA_IMAGE
### Response:
(Severity: 3), (Category: L2), (Description: The indicated FPGA image in SPI flash does not appear to have a valid meta-data. This means that a previous FPD upgrade operation did not finish the programming operation of the image.), (Recommended Action: Run again the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-TCAM_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature EA DLL encountered error in completing TCAM operation. This can lead to mismatch between hardware and software configuration.), (Recommended Action: The most common cause of this error is that there no more free TCAM entries available for ACL. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-NSFSTATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal error occurred when MRIB attempted to transition to/from Non-stop Forwarding mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-ERR
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process exitted due to some reason.), (Recommended Action: The system will try again. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-PUTENV
### Response:
(Severity: 7), (Category: HA), (Description: The proxy process uses putenv() to communicate with the checkpoint library. A call to putenv() failed with the specified error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is a composite bootable file in IOS XR?
### Response:
A composite bootable file (e.g., comp-hfr-mini.vm-3.6.0) is a single file that contains all the packages needed to boot a router and provide full routing functionality. It includes the base OS, routing protocols, forwarding, and management packages. Composite bootable files simplify the process of installing and booting IOS XR.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LCAC-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal system error occured.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-DUPLICATE_MT_CAPABILITY
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified LSP contains multiple items advertising the same MT capability. This is an indication that the router which owns the LSP has generated its LSP incorrectly. If the MT capability items contain conflicting overload state then the message indicates this and IOS-XR determines that the router which issued the LSP is overloaded. If the MT capability items contain conflicting attached state then the message indicates this and IOS-XR determines that the router which issued the LSP is not attached.), (Recommended Action: Identify the source of the offending packet and correct it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-NBR_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: A LDP neighbor has changed state (up/down). If neighbor has gone down, then a reason for session going down is also displayed. This message appears only if the <Bold>mpls ldp log neighbor<NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_VPN_MIB-3-ERR_TRACE_INIT
### Response:
(Severity: 3), (Category: OS), (Description: mpls vpn mib could not initialize the tracing module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-FORCED_POWEROFF_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Multiple attempts to force the powering off of the node have failed. No further attempts will be made, all boot request sent from this affected node will not be processed.), (Recommended Action: Some hardware issue on the card might be preventing a successful power off opeartion by the system. Please contact Cisco TAC with information about this error message for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_MAC_DETECTED
### Response:
(Severity: 4), (Category: OS), (Description: The punt flow trap sampler detected an excessive flow from a source MAC address. This could result in a denial of service to other interfaces. All traffic from this source MAC address will be dropped for a specified time period.), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-PARAMETER
### Response:
(Severity: 3), (Category: SECURITY), (Description: An invalid argument was passed to either the tacacsd or one of its funtions.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP_POLICY-3-ORA_RUN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-DEBUG_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX_FPD-3-UPGRADE_MD5SUM_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: PLX FPD EEPROM is corrupted or due to I2C issues, incorrect values are being read leading to mismatch in md5sum between the EEPROM and the stored md5sum. The output of 'show hw-module fpd' will show the affected FPD.), (Recommended Action: Try another FPD upgrade operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INFRA_MSG-5-RUN_LOGIN
### Response:
(Severity: 5), (Category: INFRA), (Description: User logged into shell by executing run command), (Recommended Action: This is informational that user accessed the linux shell of the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-EVM_TM_LEAF_NEW
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to create a managed timer tree leaf for the event manager.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-OUT_OF_MEMORY
### Response:
(Severity: 3), (Category: IP), (Description: pmipv6d process is running out of memory. This could be due to a memory leak. It is also possible that the process has not entirely run out of memory, but there is no single block of memory of requested size available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes pmipv6d detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes pmipv6d detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Using the Job ID from the above command, run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes memory <Job ID><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes memory <Job ID><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ipv6 mobile pmipv6 trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ipv6 mobile pmipv6 trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1-4-WARNING
### Response:
(Severity: 4), (Category: L2), (Description: A warning is generated while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of T1E1.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-WAIT_EOD_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'while waiting for EOD signal API failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-MAIN_THREAD_BLOCKED
### Response:
(Severity: 3), (Category: DRIVER), (Description: When IOFPGA driver main thread is blocked for more than the indicated time, key functionality of the driver will be affected. To allow the driver to recover from this condition, it will restart itself as part of error handling operation.), (Recommended Action: Collect the iofpga_driver core file generated because of this restart and report the problem to Cisco TAC for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-UNHANDLED_FGID_DNLD
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SYSDB_SET_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: Dumper stored various config related data in sysdb and it failed to get sysdb item. This might impact the dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_BURNER-3-NO_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No enough memory.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-ENFORCE_OOC
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is enabled without appropriate licenses.), (Recommended Action: The customer should either purchase more licenses or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-3-STATE_LIB_ERROR
### Response:
(Severity: 3), (Category: INSTALL), (Description: An unexpected failure occurred attempting to read or update key ISSU state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBC-3-SLOT_ID_CHANGE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CBC detected unexpected slot id change. The system can no longer manage/monitor the card's environment conditions. Normally this means some HW issue on slot id pins, there are 6 pins per board to indicate a valid slot, if any of the pin has noise which get changed during card operation, we will see this alert), (Recommended Action: Reboot the LC. If the problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-3-SUBBLOCK_REG_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The software forwarding support for IEEE802.1Q VLANs was unable to initialise on the specified node. Software forwarding VLAN functionality on the affected is likely not to work.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ECMP_ERR_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Protocol has registered for no ecmp support but is adding more than one path for a route.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-BP_EN_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error while trying to grab or release the lock.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-6-INSTALL_OBTAIN_VERSION_FAIL
### Response:
(Severity: 6), (Category: INFRA), (Description: XLNC has tried to read the loaded kernel version and the on-disk kernel version and has been unable to obtain this information. XLNC will not restart as part of an initial resync.), (Recommended Action: Please check the kernel module is loaded and that exi_driver.ko is on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-6-SYSDB_INTERN
### Response:
(Severity: 6), (Category: MGBL), (Description: TTY Server is trying to access Sysdb-mc and an error [no members in group] is returned from Sysdb-mc to all the Clients. This is a generic issue with all the admin band processes which comes up earlier than sysdb svrs will have to attempt the reconnect to sysdb with ECM retry.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the ignore-lsp-errors command in IS-IS?
### Response:
The ignore-lsp-errors command allows a router to ignore LSP packets with checksum errors rather than purging them. This can be useful in networks with faulty implementations that may generate LSPs with checksum errors. However, it is generally not recommended as it can lead to routing inconsistencies.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-3-INVALID_DATA_IN_IDPROM
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The power module IDRPOM is not properly programmed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-1-FABRIC_MODE_CHANGE
### Response:
(Severity: 1), (Category: FABRIC), (Description: User has configured a fabric mode change. This configuration does not take effect without router reload. If standby RP present, wait for standby to be Opertional (check by 'show platform')), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-6-INSTALL_ROLE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Role installation completed.), (Recommended Action: Reload the module using 'hw-module location <ISM> reload')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE6_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE6_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-RX_BAD_PREFIX_LEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: An LDP message containing a destination IP Prefix with a bad prefix length has been received from a peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_EPRTC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ePRTC.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-EVENT_CONN_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to create a connection to an essential service during initialization. This is an internal software error. It requires a restart of the isis process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAR_ALIGN_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 char alignment error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-ERR_EVM_CREATE
### Response:
(Severity: 4), (Category: INFRA), (Description: CMPP failed to create its Event Manager which is a critical resource for the operation of the process. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_HW_INIT
### Response:
(Severity: 1), (Category: FABRIC), (Description: The board initialization failed the specified operation while configuring the device. The driver will exit and attempt to come up again. On multiple such failures, the board will be shutdown permanently by the shelf manager.), (Recommended Action: Collect console logs. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_CANDIDATE_PATH_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: An SR policy changed to use a new candidate path preference. This message appears only if the <Bold>segment-routing logging policy status<NoBold> command is configured.), (Recommended Action: If changing from a higher to lower preference, Use the reason under the inactive candidate path to determine reason for path invalidation as a hint to triage it further.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FAN_AF_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when fantrays's in the satellite are of opposite air flow type to each other. Satellite chassis shutsdown after two minutes from the time alarm is raised.), (Recommended Action: Please use fan trays of same air flow type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCONBKUP-7-RELOAD_REPLY_ERR
### Response:
(Severity: 7), (Category: MGBL), (Description: Error encountered while replying message during ASCII System Configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-ENCODER_ERR
### Response:
(Severity: 4), (Category: SYSDB), (Description: Error starting bag encoder.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: an external API has failed in Inventory Manager. The details are supplied with the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-PCE_PEER_STATE_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: An PCE peer has changed state. This message appears only if the <Bold>segment-routing logging pce peer-status <NoBold> command is configured for the XTC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPPIMDLL-3-ENS_NRS_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred during ENS or NRS communication between the PIM and BGP processes. This can occur when the pim bgp producer or the pim mdt safi consumer - -fails to register/unregister with the ENS -fails to create NRS class), (Recommended Action: This indicates a problem with ENS or NRS. Do the following action to check for errors. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show pim trace bgp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show pim trace bgp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mlib trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mlib trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show pim bgp-safi<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show pim bgp-safi<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show pim trace mdt bgp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show pim trace mdt bgp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-4-ERR_IMDR_NOTIFY
### Response:
(Severity: 4), (Category: FABRIC), (Description: The Fabricq Mgr received an event from the iMDR Mgr that it did not register for.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPIDB-2-OPEN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the lc idb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is a info message from FPD operation.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth underflow feature?
### Response:
The MPLS TE auto-bandwidth underflow feature allows auto-bandwidth to react more quickly to drops in traffic flow by triggering an immediate bandwidth adjustment when the measured rate drops below a configured underflow threshold. It aims to free up bandwidth on the tunnel path more promptly when traffic decreases significantly.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGMP_MTRACE-3-MSG_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Messaging error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-4-SVC_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: A service API warning is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered the specified error during the initialization sequence. This facility is deemed crucial and hence the process is automatically restarted on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-6-SPAN_FILE_WRITE_SUCCESSFUL
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: SPAN write to file was successful.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-RIB_LOCAL_ADDRESS_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-SERDES_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected a serdes error on link 4.), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Crossbar driver Event Manager event block error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-EA_INIT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an error has occurred during the 'pbr_ea' process initialization and it may prevent PBR from functioning. Particular reason is included in the message), (Recommended Action: Allow the 'pbr_ea' process to restart with the command <CmdBold>process restart pbr_ea location <node id><NoCmdBold>. If the problem persists, contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_CONFIG_SERVER
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-XFP_HOTSWAP
### Response:
(Severity: 4), (Category: L2), (Description: The inserted XFP failed to power on correctly during initialization.), (Recommended Action: None. Software corrected the issue by power cycling the XFP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATSD-3-SHMEM_CORRUPTED
### Response:
(Severity: 3), (Category: MGBL), (Description: In certain unlikely scenarios it is possible that during a process restart the shared memory region used by the stats infrastructure can become corrupted. In most cases this will automatically be recovered from, however there is a possibility that the system will not be able to recover from this - The specific instance of the message will indicate which of these cases has arisen. If the system is unable to restart all necessary processes then multiple process crashes/blockages may be observed. In either case, reported statistics may be reset or inaccurate.), (Recommended Action: In the recovery case, processes should restart automatically and the system should recover so no user intervention should be required. If we are unable to automatically recover, then either the node should be reloaded, or support contacted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SETUP
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was something illegal about the setup operations that where performed. This should be a straight coding error that will fail everytime and should be cleaned up before releasing the code.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_BACKEND
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the Backend service related to use of either SysDB or SubDB. The error message describes what operation has failed and why it failed. The most likely reason for this is low memory resources or a programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-XR_ISO_MISSING_IN_INPUT
### Response:
(Severity: 3), (Category: INFRA), (Description: XR iso should be provided in the input while carving new SDR. Invalid input.), (Recommended Action: Provide XR ISO in the input image list and try carving SDR again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_TX_FIFO_OFLOW_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported tx fifo overflow on bridge instance - 1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-MAC_LIMIT_PW_SET
### Response:
(Severity: 6), (Category: L2), (Description: Number of MAC addresses in the pseudowire has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-6-RWLOCK_TIMEOUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The RDM server timed-out waiting to acquire a write lock on the global (context) read-write lock. This could happen if the client was holding the lock for too long or has exited. The RDM server will continue to operate.), (Recommended Action: The RDM server will continue to operate despite of this condition. Check if any of the rdm client processes are exit or crashed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-3-CACHE_LOOKUP
### Response:
(Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-SLICE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. Slice failure: Slice failure affecting all slices and no slice is powered UP.), (Recommended Action: System is not usuable. Power failure happened during system boot. Need to reload the board for recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSDB_ITEM_TYPE_BAD
### Response:
(Severity: 7), (Category: OS), (Description: Dumper keeps various config related data in sysdb. Unexpected item type under config for dumper. This might impact the funcitoning of the dumper.), (Recommended Action: Restart dumper config and see if the issue is resolved. If not please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show-tech sysdb 7.If possible please collect debug messages of dumper.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-PM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed PM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_TTL_CHASSIS_CFG_CHANGED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with reloading the chassis.), (Recommended Action: N/A If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-PCIE_TXIF_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: CIB PCIe Tx interface FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-MEMORY
### Response:
(Severity: 7), (Category: INSTALL), (Description: The system is running out of memory and was not able to allocate sufficient memory to carry out the requested operation), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_SERVER-3-PROCESS_INIT
### Response:
(Severity: 3), (Category: L2), (Description: The initialization of the EDRM server process failed due to the indicated reason.), (Recommended Action: None. The process initialization will be retried automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_INTERNAL_SW
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Aggregator encountered the annunciated SW error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGEDM-3-FAILEDREGCOMP
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Compiling a regular expression failed with the reason mentioned in the message. This may lead to wrong 'show config failed' listing.'), (Recommended Action: Please contact TAC with the output of the following commands: - console logs - show version - show process nvgen_server - show nvgen trace ascii-backup reverse - show configuration history If the error recurs frequently, it may be possible to rectify it by restarting 'nvgen_server' process. But please collect the logs mentioned above, before restarting the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-IDT_RECOV_CLK_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IDT Recovery clock I2C Failure/Success while accessing device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_THRESHOLD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error threshold was crossed.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-SPAWN_RM
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to spawn the 'rm' process. Unable to remove existing configuration from PRP.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL_GRE_EA-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the platform specific code software to indicate anomolies while initializing GRE Feature. This error is most likely caused by a temporary situation within the feature code. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-6-NCS1K_PORT_RESET_SUCCESS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-ERR_SYSDB_EDM_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabricq Sysdb Register EDM error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-IMDR_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Plim asic driver imdr errors. Typically these errors indicate failure in system services during the imdr procedure.), (Recommended Action: Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-BGPLS_MEM_SHUT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The router or OSPF process is experiencing low memory condition. As a setup to stabilizing system, the BGP-LS feature is first being disabled so as to recover memory for OSPF and system to be able to perform basic routing operation. The feature would get re-enabled once memory condition returns to normal.), (Recommended Action: Investigate the cause of low memory condition by following the standard memory troubleshooting steps. Until the condition is restored the feature will remain disabled)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_BUF_CRC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected excessive input buffer CRC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-OVERSUBSCRIPTION
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A warning about an over subscription of ports . The warning message describes that this particular NP is over subscribed.), (Recommended Action: The warning is not critical.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-ERR_IPC_SEND
### Response:
(Severity: 3), (Category: ROUTING), (Description: AIPC ipc_sendv returns an unexpected error other than flow control.), (Recommended Action: AIPC return unexpected ERROR code. A chance of losing lsd information. Please collect show tech for mpls_lsd and aipc for further investigation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_LOAD_PHASE_STARTED
### Response:
(Severity: 6), (Category: INSTALL), (Description: The load phase of an ISSU operation has started - another message will be output when the phase finishes.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-3-ASIC_ERROR_SHUTDOWN_LINK_FABRIC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An ASIC error has occured and cause fabric link shutdown.), (Recommended Action: An error that causes fabric link shutdown has happened and been handled *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_MA-3-ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_BFD_SESSION_STATE_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: BFD session state has changed for a particular LSP.), (Recommended Action: If the session state is down, then it means that dataplane may be dropping traffic. If the session state is up, then it means that at least some data is getting through.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_LQ_OFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 1 LQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-EFD_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: An interface was shut down or brought up by a local MEP after a fault condition was detected or cleared. The action is taken because the service to which the local MEP belongs has EFD configured; this message appears because the service has EFD logging configured.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-3-ADD_CONNECTED_ROUTE_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: A failure occurred when attempting to create a connected route in the TPA system for the specified vrf interface. Forwarding for TPA applications (including telemetry) will likely be impacted if they use the connected route.), (Recommended Action: Restarting the kim process or unconfiguring and reconfiguring the VRF may be sufficient to recover. A switchover or router reload may be required if this condition persists. This error condition may sometimes be worked around by configuring the VRF to use the 'mgmt' default route. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-TIMER_INIT_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to init timer events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_EEEC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from EEEC.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_MGBL-7-INIT_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The process failed to initialise and will exit.), (Recommended Action: The process will be restarted automatically. If the error happens repeatedly then contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-BAGS_UNREG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-ERR_SYSDB_CONNECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospfv3_uv process was unable to bind to SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-4-SET_THREAD_NEW_PRIORITY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unable to set the heartbeat pulse of this node to high priority. Proceeding with default priority, however in a high CPU consumption, this node's heartbeat pulse may get lost, causing this node to get reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_OPTICS_GLOBAL_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_UCORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory uncorrectable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_1_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_ECM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FIA driver encountered an event connection manager error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-POWER_FEED_REDUNDANCY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The router will have insufficient power to sustain traffic in the event of an AC power feed failure.), (Recommended Action: - Please collect the following CLI command to determine the current budget situation and to see if there are any failed power modules. <CmdBold>admin show environment power-supply<NoCmdBold> - Install additional power supply modules and in case of presence of failed power module(s), replace those unit(s) until the alarm clears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_NI_INTR_BA_STALLED_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_BA_STALLED interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-SIA_EXPIRE_CLOCK_CHANGE
### Response:
(Severity: 2), (Category: LICENSE), (Description: SIA Grace period will expire if clock is set back in time for more than 24 hours.), (Recommended Action: Register the device to Cisco CSSM Server and rectify SIA OOC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB_API-7-ASYNC_WAR
### Response:
(Severity: 7), (Category: ROUTING), (Description: 'A recoverable error condition occurred in the MRIB API'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: OS), (Description: The PA encountered some problem in genric nature or plain information.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-SHMWIN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Operation on the shared memory window encountered the error.), (Recommended Action: Please collect output of the following commands: show platform show log show process blocked location <> show shmwin summary location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AMT-3-NET_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PINGMIB-3-NOTHREADCREATE
### Response:
(Severity: 3), (Category: SNMP), (Description: A software error occured when the ping mib process try to create a PING request processing thread), (Recommended Action: The process will attempt to recover from this situation by exit. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Retrying ping mib with time gap might help.If that does not work contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT_SHOW-7-EXTEND_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: The show decode helper library attempted to extend its database of decode trace string data and was unable to do so. Any trace using this string may not be printable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-7-EXCEPTION_LITE
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: An software exception had occurred in the packet manager library. The client process terminated with exit code -1. The reason is that the client passed an invalid packet to packet manager library and led to the exception.), (Recommended Action: Normally the client process will restart and re-connect to packet manager. If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SI-3-SD_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: And API call to service director failed. Details of the operation are part of the error message. This may impact service bringup on the configured location.), (Recommended Action: This may prevent functioning of SI on the configured location. Try restarting si process emitting this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-RLDRAM_BIST_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Egress queueing ASIC encountered a failure when doing BIST testing on its external Redunced-Latency-DRAM (RLDRAM). Possible cause for this error condition is a faulty hardware.), (Recommended Action: No action is required. The linecard is automatically reloaded. If the error persists, replace the Modular Service Card (MSC).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-FILE_OPERATION
### Response:
(Severity: 3), (Category: MGBL), (Description: config process failed to perform a file operation due to either filesystem restart/busy or an internal error.), (Recommended Action: This error could happen when config process can not perform a file operation successfully. This is mostly the case when filesystem has restarted or network connectivity is broken (if tftp file). Collect the show context output, config file being copied, show config failed output, console logs, pidin, top output and contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Workaround: Retry the config operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-OPEN_PROCFS
### Response:
(Severity: 3), (Category: HA), (Description: Failed to open procfs file or directory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-5-LOG_NOTICE
### Response:
(Severity: 5), (Category: OS), (Description: A Notice message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIER-2-PCIE_FC_ENUM_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCIE enumeration error was detected for this Fabric Card. The error prevents this card to do traffic switching thereby making it unusable), (Recommended Action: Please correct the problem by reloading the FC board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-RP_SWITCHOVER
### Response:
(Severity: 6), (Category: INFRA), (Description: An RP switchover has occurred during an install operation. The formerly active RP will be removed from the install operation, and will remain out of service until the install transaction is completed. The user is required to complete the transaction by running <CmdBold>install commit<noCmdBold> if the software is acceptable, or by reloading the router to bring the system up with the software present before the current transaction. The ongoing transaction will continue without this node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-NOTIFY_BNM_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The CFM packet handling module has detected that there is a new BNM link, a bandwidth change on a BNM link, or the periodic timer has expired but has failed to notify the management module. As a result, the proper handling for this event (eg generating log messages and invoking EEM scripts) will not take place.), (Recommended Action: If the error persists, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-ERR_MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospfv3_uv process was unable to allocate memory for the specified resource.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-3-LIB_INIT_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An initialization routine from a dynamically loaded library failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-4-LTRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: ltrace initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-PKT_INT_ERR_AT_DDRIF_0_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Packet Integrity Error at DDR interface from Punt/Bridge-0 FPGA on FIA 0.), (Recommended Action: Verify correct version of Punt/Bridge FPGA is loaded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-7-DBGINIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: The rpl multi-version coordinator was unable to setup the debug handlers. This will not affect its operational, but will prevent debug commands for the coordinator from functioning.), (Recommended Action: This error message may be transient. Restart policy_repository and try the use case again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-ERR_IPC_BAD_MSG
### Response:
(Severity: 3), (Category: ROUTING), (Description: LSD received a message with bad size or bad version.), (Recommended Action: Please collect show tech for mpls_lsd and aipc for further investigation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-3-ERR_REGISTER
### Response:
(Severity: 3), (Category: IP), (Description: Registration for an IOSXR service failed during HSRP's operation. This may indicate a connection failure with the IOSXR service as indicated in the error message.), (Recommended Action: Restart the HSRP process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-AUTH_VERIFY_FAILED
### Response:
(Severity: 5), (Category: ROUTING), (Description: The process encountered an error when verifying the authentication digest. This may be due to misconfiguration on the local or remote system. It is possible that no currently valid keys are available or the remote system is using an invalid authentication key.), (Recommended Action: Check the password and authentication configurations on the local system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-1-IDPROM_INVALID
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'The IDPROM may be corrupted.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_CSS_CERTIFICATE_EXPIRED
### Response:
(Severity: 4), (Category: SECURITY), (Description: SAM found the expired CSS certificate in table had been accepted by user.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T3E3-4-LOOPSTATUS
### Response:
(Severity: 4), (Category: L2), (Description: A configurable controller loopback status.), (Recommended Action: No action reqiured. Msg displays loop status)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MVRP-4-MAD_INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The MVRP IO process has failed to reinitialise with the MAD following a change in bridging configuration. Periodic retries will occur to successfully reinitialise with the MAD. Until the MAD is initialised the protocol will not run.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_MISSING_OR_NULL
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to display rollback changes in Cisco IOS XR?
### Response:
To display the changes that will be rolled back, use the 'show configuration rollback changes' command. RP/0/RSP0/CPU0:router#show configuration rollback changes
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_WDMON-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in the CPA interface), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-LIB_UTIL_ERROR_NO_MEM
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to allocate memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXRC-2-WARN_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-EVENT
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error occured receiving an event from the OS. The process will restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_L2FIB_METRO_SHOW-3-INVALID_ARG_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HFR_L2FIB_METRO_SHOW has encountered an init or a sysdb error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INST_IO-7-DEVICE_FULL
### Response:
(Severity: 7), (Category: INSTALL), (Description: An attempt to open or write to a file on the specified device failed because the device had insufficient free space. The node may be in an inconsistent state due to a missing or truncated file; check for other messages from applications. Remove non-critical files, such as core files and user-created files, and reload the node to re-sync its files. If this is a management node such as an RP, consider using 'install remove' to free up space by removing inactive packages.), (Recommended Action: This indicates a low resource condition. Remove non-critical files, such as core files and user-created files, and reload the node to re-sync its files. If problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-NO_OPERATION_ID
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license manager encountered an error while attempting to read the license operation ID. Without a valid license operation ID the license manager will not be able to support licenses locked to the affected chassis. Check the error string to determine what has happened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred at system initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes msdp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes msdp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process msdp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process msdp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-PKT_INT_ERR_AT_DDRIF_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Packet Integrity Error at DDR interface from Punt/Bridge-1 FPGA on FIA), (Recommended Action: Verify correct version of Punt/Bridge FPGA is loaded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-KERNEL_INFO_MMAP_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: Space might not have been allocated for storing kernel dump information), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF_CL-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when calling the debug_init_event() function.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-OOB_FC_1_ERROR_ALERT
### Response:
(Severity: 1), (Category: FABRIC), (Description: Out Of Band flow control error detected for SPAUI-1 on FIA instance, traffic would be impacted.), (Recommended Action: Please reload the board in the next maintenance window. If this fault happens on a single FIA/slice on LC, the interfaces for this slice would be shutdown; if the fault happens on RSP/RP, the RSP/RP would be reloaded. If the fault could not be cleared after card OIR, please RMA the card. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-SYSDB_CONFIG_TIMEOUT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Unable to retrieve configuration information from sysdb. The linecard will be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_I2C_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected I2C access error on XFP port.), (Recommended Action: Ensure that the XFP plugged in is supported. If not, please replace the XFP. If the problem persists, please OIR the XFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-CHKSUM_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: Diagnostics detected a software error computing the checksum of a recieved packet. This is not a service impacting error.), (Recommended Action: Another software component will attempt to fix the problem or may give additional error messages. Please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area. If the error messages continue, copy all error messages exactly as they appear on the screen and gather any relevant information about the circumstances. Also collect the information from the 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-3-FGID_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Inbar HB running on context node failed to unregister itself with the FGID Controller while node is going down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
sse_qosrm-3-MUTEX_DESTROY_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Failed to create the mutex.), (Recommended Action: Restart the process to recover from the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-5-TIMEOUT
### Response:
(Severity: 5), (Category: OS), (Description: dumper restarted due to watchdog timeout.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_5_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_PROTECT_INFRA_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register or unregister with protect infrastructure for high priority link-down notifications on the specified interface. IS-IS will still react to regular link-down events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-EVM_ATTACH_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: The IPv4 MA process could not register the handler for the indicated event. This can happen when the process is (re)starting. The process recovers by restarting itself. If the error message doesn't persist, it can be ignored. If the error message persists, some basic ipv4 functionality may not be available.), (Recommended Action: Collect the output of show tech-support, show processes, show ipv4 ma trace, debug event-manager attach job <> from the location the error message comes from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SHMWIN_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Initialization of shared memory window failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-SIA_LICENSE_PENDING_STATE
### Response:
(Severity: 2), (Category: LICENSE), (Description: SIA License status couldn't be obtained.), (Recommended Action: The customer should check the connection to the backend Smart Licensing server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VLANIFMIB-4-MIBLIB
### Response:
(Severity: 4), (Category: SNMP), (Description: The VLAN Interface table relationship MIB encountered an internal error. It is likely that an SNMP query that was in progress will not have been completed.), (Recommended Action: Retry the operation that caused the message to be displayed. It may help to restart the SNMP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_CFG-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The npu config (npu_cfg) failed to create an event manager during the initialization. The driver will be non-operational due to this error.), (Recommended Action: The npu_cfg will recover by restarting. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-3-ERR_RMF_REGISTER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: RMF registraton got failed as reply status is not ok. Please refer the reply status for more detail.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SAC0_ECTW_RD_PERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-EVM_FILE_ATTACH_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper uses resource manager for various resons. Unexpected failure to attach pathname to the process might cause problem in the core dumping scenario.), (Recommended Action: Collect the following data and contact support. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_WRLOCK
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-BOARD_NOT_SUPPORTED_ONSLOT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being shutdown because it is not supported on the specified CRS platform.), (Recommended Action: Remove the unsupported board and replace it with supported hardware.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_DEBUG-7-REGISTER_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-3-COMMON_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CIH library encountered an error related to memory or data value.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SYSDB_UNPACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-FI_TOPOLOGY
### Response:
(Severity: 4), (Category: FABRIC), (Description: An inconsistency between the expected and observed topologies of the fabric was detected.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-EXIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred at system initialization time.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLC-5-NSF_START
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_SCRUB_THRESH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: ASIC errors have occured and need memory scrubbing, such errors have crossed threshold.), (Recommended Action: Errors have been handled. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-OIR_INFO
### Response:
(Severity: 6), (Category: DRIVER), (Description: Optics driver module oir detecred.Insertion/Removal of Optics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_4_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
METRO_STATS-7-ERR_MEM
### Response:
(Severity: 7), (Category: L2), (Description: An error occurred in Hardware Stats Manager during shared memory operations. This may be because the system is running low on memory. The types of errors are: 1 Cannot open/reset/close shared memory window 2 Cannot allocate/free shared memory. This will cause Stats Server to not be able to have a shadow copy of stats for all clients.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the BGP route refresh capability?
### Response:
The BGP route refresh capability allows a router to dynamically request a re-advertisement of routes from a neighbor. This eliminates the need to store received routes as with soft reconfiguration. It is enabled by default if both neighbors support it. Otherwise, it can be enabled with the neighbor send-community command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EEM-0-ACTION_SYSLOG_LOG_EMERG
### Response:
(Severity: 0), (Category: HA), (Description: The action_syslog call from tcl script.), (Recommended Action: Please verify command(s) mentioned in tcl script prior to error message are working fine (on router prompt). If issue is still seen then please provide command details which has resulted into this error condition to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-SHUTDOWN_ON_BOARD_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being brought down to IN_RESET state due to occurence of multiple critical faults/alarms on the node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_SYSDB_EDM_NOTIF_GEN
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB external data manager failed to generate a trap notification. Process would continue to run normally.), (Recommended Action: This message indicate that trap notifications of the operational states of planes and bundles would not occur. If snmp managability is not enabled, this message can be ignored. However, if this functionality is necessary then restart the process by issuing the following command at the CLI of the active RP after collecting all the output of all the specified commands. 'admin process restart fsdb_server/fsdb_aserver loc <loc>' Restart fsdb_server if the bundle state traps are missing else if plane state traps are missing restart fsdb_aserver. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-INVALID_ADJ_SID
### Response:
(Severity: 4), (Category: ROUTING), (Description: When adjacency SID value is configured, it should be within the SR Local Block configured on the router (default 15000-15999). The adjacency SID will not be used until this config inconsistency is resolved.), (Recommended Action: Fix the configuration such that the Adjacency SID value lies within SRLB. Ignore if this is already done and warning will repeat until this is fixed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_READ_RTC
### Response:
(Severity: 7), (Category: MGBL), (Description: Reading value of RTC at particular time.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_LMRIB_LABEL_RW
### Response:
(Severity: 3), (Category: ROUTING), (Description: A LMRIB Label Rewrite related error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng -show lmrib client trace for further analysis of the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAPS-5-UTIL_HIGH
### Response:
(Severity: 5), (Category: IP), (Description: Utilization exceeded high threshold across all pools. The unallocated addresses may deplete very soon and so it would be good to add more pools or address ranges for allocation to new clients. Otherwise new allocation requests will fail. Pool utilization can be monitored using the command 'show pool ipv4/ipv6'.), (Recommended Action: Add more pools or address ranges for allocation. For details regarding related configurations, please refer 'Address Pool Service Commands' chapter in Cisco IOS XR software configuration guide.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-MSG_SEND_FAILED
### Response:
(Severity: 4), (Category: MEDIA), (Description: The message sent to the media server failed for the specified operation number and failed for the specified reason.), (Recommended Action: Report this message to TAC if the message showed up once but recovered Report this message to TAC together with console log, 'show media', 'show media trace' if message continues)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-PEER_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Some peer error occured. This is just a warning. Please ensure that the msdp peers are configured correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace peer<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace peer<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-LIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_FF_OVF_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 Tx burst FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-IM_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred when the ANCP process tried to perform initialization with the interface manager process. The error could be because Interface Manager is unavailable at the time of ANCP initialization or a software error in either of ANCP or Interface Manager processes.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and if ANCP process is able to initialize and come up successfully after restart, then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-CONFLICTING_LSAID
### Response:
(Severity: 4), (Category: ROUTING), (Description: An LSA could not be generated because there is a supernet lsa with the host bit set LSA ID that conflicts with the major net LSA ID that also needs to have host bit set.), (Recommended Action: This is a limitation in OSPF's ability to handle conflicting LSA IDs. Attempt to avoid this limitation by modifying the generation of summary LSA's so that the LSA ID's do not conflict. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_DATABIT_STUCK_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory databit stuck on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-LBUS_READ_TIMEOUT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Local Bus read operation timeout error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-SR_TE_LL_INVAL_NEXTOBJ
### Response:
(Severity: 2), (Category: ROUTING), (Description: lspnh ll programmed to drop because of invalid next obj), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-OOR_TBL
### Response:
(Severity: 2), (Category: ROUTING), (Description: The FIB process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes/tables are deleted and customer does a recreate of the table.), (Recommended Action: Run the following command and check which resource(s) are running low on memory: <CmdBold>show cef resource location <node><NoCmdBold> Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Significant routes/tables will have to be deleted followed by a reconfiguration of the table.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_MAC_DELETED
### Response:
(Severity: 4), (Category: OS), (Description: A source MAC address that was previously flagged by the punt flow trap has been removed from the 'penalty box' because the interface on which it was flagged has been deleted.), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_MA-3-CFG_UNDEFINED
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: The prepaid configuration name that was specified in the prepaid command has not been defined in the system.), (Recommended Action: Define a prepaid configuration with the name used in the prepaid command or change the name in the command to an existing prepaid configuration. If the prepaid configuration is defined, then its an internal error. If issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-LRD_CALL_STILL_TRYING
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install manager needs to call some APIs to retrieve information during its initialization. If the information is not retrieved successfully install director will retry after a small time interval until success.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-EVENT_BLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_block() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_VETHER_DRIVER-3-REPORT_BER_SET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BIP error count has crossed the threshold count w.r.t the configured threshold value.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTU1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB_MAIN-3-GET_NODE_ID_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to get node id in process fsdb_fadb), (Recommended Action: Search the event logs for events/errors related to the failure reason. Node ID management is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) and the output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-5-DEVICE_REPAIRED
### Response:
(Severity: 5), (Category: MEDIA), (Description: The media storage card specified has some inconsitencies in the filesystem and was repaired. See log file for specific reason.), (Recommended Action: Run install verify and cfs check.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_OAM-2-SYSDB_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Error in sysdb operation. %s - Type of the error. This error happens on the LC with ATM interfaces It could be one of the following types: - Unknown parameter - Sysdb Tuple is not of proper type - Sysdb Tuple fetched is corrupt - Parameter was out of range - Invalid Configuration), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Error in the config that is being committed. Check the configuartion and change it according to the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_QUEUE_MODEL-3-ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The specified operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINK-4-BERTNOTRUNNING
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Trying to stop BERT when not running), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-SONET_XCVR_CODE
### Response:
(Severity: 2), (Category: L2), (Description: The xcvr code is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA - Enabling power for LC), (Recommended Action: No actions are required as this is just an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-6-INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: This may not be a failure, but the information about the progress of the install operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_PFILTER_EA-3-ERR_IM_CAPS
### Response:
(Severity: 3), (Category: L2), (Description: 1) An ACL could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. c) IPv6 address compression table is full. This error can happen when a new bundle member is added and the ACL can not be programmed successfully. 2) An ACL could not be removed from hardware.), (Recommended Action: 1) When this error occurs the running-config will not be in sync with line card configuration. It is recommended that the bundle member on which the error occured be removed from the bundle. The ACL configuration may also be reduced until it can be successfully programmed on the new bundle member. 2) If the ACL could not be removed from hardware a line card reload is recommended.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Interrupt controller encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-SYSDB_CONN
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP Server was unable to create a connection to the SysDB component. It may be that the communication infrastructure is faulty, or that the SysDB component has not yet restarted. If the errors persist, the router may need to be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-INV_READ_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: Indicates that the switch's static configuration data could not be read or parsed successfully.'), (Recommended Action: Determine the board type (version/revision) to make sure that its of supported HW. Not all board types are supported by the inventory manager. If this is a supported type, then root cause has to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-6-LINK_SHUT_DOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The intra-rack switch port was administratively shut down.), (Recommended Action: This port is being administratively shutdown. No further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-XFP_OIR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Optic Interface Module (XFP) for the specified port has either been inserted or removed.), (Recommended Action: This is an info message saying the XFP is inserted/removed. Please check if there is a manual intervention to remove/insert the XFP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-IFD_ETHSVR_MSG_ERR
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostic software has detected an error while running Field/Offline Diagnostic (IFD) on the target node/card under test.), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-1-PERSISTENT_SERDES_FAIL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Persistent failure in serdes link.), (Recommended Action: Please try powercycling the board using command: 'hw-module loc <> reload'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-6-UNREG_PROC_SUCCESS
### Response:
(Severity: 6), (Category: HA), (Description: Process un-registration for node memory state with wdsysmon is success.), (Recommended Action: No action required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-VSA_FORMAT_ERR3
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA format error in daemon user configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-SERDES_CLOCK
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. SerDes Clock Failure/Recovered. SerDes PLL Lock is lost or recovered. 2. SerDes input clock failure. This could be also result of hardware failure. Following enum defines significance of 'BMP'-SerDes LCPLL error bitmap, data. E.g. if BMP is 0x03 it means LCPLL_REFCLK0 & LCPLL_REFCLK1 is affacted. typedef enum sfe_serdes_lcpll_err_ { SDS_LCPLL_ERR_NONE = 0x0, SDS_LCPLL0_ERR = 0x01, SDS_LCPLL1_ERR = 0x02, SDS_LCPLL2_ERR = 0x04, SDS_LCPLL3_ERR = 0x08, SDS_SRD_REFCLK_Q26_ERR = 0x10, SDS_SRD_REFCLK_Q35_ERR = 0x20, SDS_LCPLL_ERR_MAX = 0xFF } sfe_serdes_lcpll_err;), (Recommended Action: PON Reset the ASIC. Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. 'show processes sfe_driver location <loc>' 2. Collect all traces: 'show controller sfe trace all location <loc>' 3. dmesg and /var/log/messages from host and sysadmin VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_0_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 0 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-SFPPLUS_ACCESS_PERSIST
### Response:
(Severity: 3), (Category: L2), (Description: Software could not access the optics module during initialization.), (Recommended Action: Replace the SFPPLUS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-ERR_INTERNAL_ASIC
### Response:
(Severity: 3), (Category: L2), (Description: Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted.), (Recommended Action: No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-REQ_MSG_PROCESSING
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred during processing of a LWM message from a client.), (Recommended Action: Please check the operation requested and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_FMEA-4-CLOCK_ALERT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: One of the internal/external clock interfaces have reported an alarm as specified in the alarm description. This does not necessarily mean any fault in the hardware. Some alarms can occur transiently during clock-events like configuration changes, network events or cabling changes. The alarms should cancel within few minutes in such cases. If the alarms persist then it may not affect routing/forwarding but timing distribution may be impacted.), (Recommended Action: Ensure cable connection between the configured interface port and external equipments is proper.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-6-CHKPT_RECORDS
### Response:
(Severity: 6), (Category: OS), (Description: Status information while checkpointing.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Overload bit in IS-IS?
### Response:
The Overload bit is a special bit that can be set in the LSP to indicate that the router should not be used as a transit router. This is useful when the router is in a transient state, such as during startup or during a software upgrade. It prevents other routers from sending transit traffic through the overloaded router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-TIMEZONE_CFGSTR_SET_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This indicate error when setting timezone string.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-NO_MEMORY
### Response:
(Severity: 7), (Category: OS), (Description: Not enough memory available in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-4-ERR_EVENT_WAIT
### Response:
(Severity: 4), (Category: MGBL), (Description: The event loop has received a message of a type it does not recognize. All events should be received by handlers. This message is only a warning and does not represent a problem in its own right.), (Recommended Action: If the process is otherwise working OK then a one-off occurrance of this message can be ignored. If the process is experiencing other problems then include this error message in the details given to support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOL_DEMA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-3-TRANSPORT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DSC Media DLL has encounered the annunciated transport error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_MFWD_FRETTA-7-ERR_BAG_REGISTRY
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-FRETTA library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_NI_INTR_CRC_ERR1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_CRC_ERR1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLPROD-6-MSG_GENERIC_ERROR
### Response:
(Severity: 6), (Category: OS), (Description: BCDL producer dll encountered an error.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-DEBUG_SENDV
### Response:
(Severity: 7), (Category: OS), (Description: debug print before msg_sendv), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SESSION_START
### Response:
(Severity: 5), (Category: L2), (Description: After all config dependencies are resolved MKA started session specific to each interface), (Recommended Action: No action required (normal operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-NLSOCK_CREATE_FAIL
### Response:
(Severity: 4), (Category: DRIVER), (Description: IOFPGA driver creates Socket on Black VLAN interface (3073) for communicating with remote cards in the Chassis. If the socket creation fails, then all Ethernet communication from Niantic fails and I2C path is used to reach remote cards.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPv4-4-LTRACE
### Response:
(Severity: 4), (Category: IP), (Description: There was a system call failure during initialization of the ltrace logging system. Ltrace logs may not be available.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-4-DEPRECATED_CONFIG_BURST_INTERVAL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Burst-interval configuration is no longer available and will be removed in a subsequent release.), (Recommended Action: Use tx-interval to configure transmission interval for packets.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-INCORRECT_PARTITIONS_REPARTITION_DEVICE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Some existing eUSB may have wrong FS or partitions. Check if need to reformat the eUSB. This message will get printed if there is incorrect eUSB partitions and if there a need to repartition the device.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-BGP_ENS_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-7-DEVICE_CONFIGURED
### Response:
(Severity: 7), (Category: INFRA), (Description: Device is already configured. ZTP will exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACE_CLIENT-0-ERR_MEMORY_MAP
### Response:
(Severity: 0), (Category: PLATFORM), (Description: An error occurred in mace driver due to memory mapping failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-ERR_EXIT
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in NPU Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: OC192VPA driver general info.), (Recommended Action: show asic-error plim asic .. loc <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-BITS_CONFIG_NOT_SUPPORTED_IN_HARDWARE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BITS-In and BITS-out ports support either of T1/J1/E1/2M/6M/64K modes. Framing modes and linecoding modes are specific to each BITS mode.), (Recommended Action: Ensure the following submodes are used with each BITS mode. T1/J1 - Framing mode - d4/esf T1/J1 - Linecoding mode - ami/b8zs E1 - Framing mode - fas/cas/crc4/cas-crc4 E1 - Linecoding mode - ami/hbd3 2M/6M/64K - No Framing or Linecoding modes supported Additional configurations to be considered for T1 bits-output T1 - linebuildout(FT)- 0_133/133_266/266_399/399_533/533_655 Additional configurations to be considered for E1 bits-input/output E1 - Sabyte for cas/crc4/cas-crc4 framing mode - sa4/sa5/sa6/sa7/sa8)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_LIB-3-SYSDB_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A fatal error occured during sysdb_register_notification for PLIM process. With this, config change in the syslogTXfault will not be notified to the respective PLIM process.), (Recommended Action: Collect following info: - show tech-support sysdb - show sysdb registrations notification detail shared-plane-sc)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_drop-3-INIT
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred when installing the capability in NetIO to process slow path packets for service diversion. If this occurred during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded,and an error will be returned to the user.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_FLOW
### Response:
(Severity: 3), (Category: OS), (Description: error in PIFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-MUTEX_UNLOCK
### Response:
(Severity: 7), (Category: MEDIA), (Description: A required mutex unlock failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NSR_PACKET-2-SPP_ADD_L2_HDR_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message tells is there was an error in adding the L2 header by SPP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-3-NVSATOFFINIT
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred when initializing the nV Satellite multicast offload channel. Multicast offload will not function correctly. All dependent replications will happen on local device.), (Recommended Action: Please check if the igmp snooping profile has been attached to the bridge domain and if recommended nV satellite h/w, s/w is in use by using the following commands Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping profile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping profile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping bridge-domain detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping bridge-domain detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping port detail debug<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping port detail debug<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show nv satellite status<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show nv satellite status<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-MESSAGE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A message was received and did not match any outstanding requests and also is not a standalone message. This is not a critical failure, the process can continue functioning as expected despite the message arrival, message is discarded.), (Recommended Action: If this appears once or infrequently, it is not necessary to contact TAC. If it appears continuously or comes and goes repeatedly, it is best to please collect the following details and contact TAC. Provide the following CLI output: (admin)# show canb server-stats loc all (admin)# show canb trace loc <target nodeid> (admin)# debug canb server error loc <target nodeid> Let the debug run 2 minutes (admin)# undebug canb server error loc <target nodeid> (admin)# show canb trace loc <target nodeid> (admin)# show canb server-stats loc all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-6-NO_MEM
### Response:
(Severity: 6), (Category: L2), (Description: The VLAN MA process was not able to allocate the memory that it needed to complete the operation. VLAN functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-FALLBACK_PSK_PEER_NOT_FOUND
### Response:
(Severity: 5), (Category: L2), (Description: Connectivty Association(CA) runnning with fallback PSK, has not received a MKPDU from it's MACsec peer for at least 6 seconds.), (Recommended Action: Check connection to peer and if peer is still up and responding, make sure not to have any config conflicts(key, key-string, lifetime) across the MACsec peers, configure valid primary & fallback PSK's in the keychain repository.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_STARTED
### Response:
(Severity: 6), (Category: INSTALL), (Description: An install operation has been started - another message will be displayed when it is finished.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STREE-4-START_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: Spanning tree could not be started on the control ethernet for the node. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.), (Recommended Action: Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-4-GEN_RC_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: Request ONEP failed. It may caused by ONEP configuration lost or ONEP process failed.), (Recommended Action: Check ONEP configuration and process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-NSR_PM_ROLE_CHG
### Response:
(Severity: 5), (Category: ROUTING), (Description: ISIS is notified by PM on HA or ISSU roles.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_OOS_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_CD
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not change to a required directory, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-PROTOCOL_GENERIC
### Response:
(Severity: 4), (Category: L2), (Description: The entire PDU, or one or more IEs in the PDU, were ignored due to the given error. This indicates that the last PDU sent by the peer device was not formatted correctly.), (Recommended Action: Check that E-LMI is configured on the peer device and that the link to the peer device is functionining correctly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_SERVER-3-UPGRADE_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Update FPD upgrade ERROR), (Recommended Action: Customer immediately knows the reason of failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOPPER-3-EVET_MGR_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This message indicates that SPA process was unable to create event manager. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-ABORTING_FORCE_RELOAD_NODE
### Response:
(Severity: 4), (Category: INSTALL), (Description: Reload the node while aborting LOAD phase of install issu operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-SRLG_ANNOUNCE_ON_TERM_INTF_FAILED
### Response:
(Severity: 5), (Category: ROUTING), (Description: This is to notify that SRLG announcement for term intf has failed for a tunnel.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAR_ALIGN_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 char alignment error on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_BCM8705-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Ether-Ctrl process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ether-ctrl location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_AHS_LOS_LANE0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_EVM_CONN_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-6-ERR_2SD_PARAM
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with three parameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-4-NODE_NOT_PRESENT
### Response:
(Severity: 4), (Category: INFRA), (Description: Node to be reloaded is not present in the inventory.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-EDM_INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization EDM of the CGN process on a particular node. The errors were seen during event connection operation. The process will be restarted.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWMUTEXLOCKERROR
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred acquiring a mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-APPL_DEV_RESYNC_MISMATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detected a db inconsistency when performing a resync with an application.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-6-ADMIN_CLEAR_BINDINGS
### Response:
(Severity: 6), (Category: IP), (Description: The administrator cleared the bindings.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_AHS_LOS_LANE3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE-3-ERR_SHMEM_OPEN_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to open the shared memory fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_PDU_LENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The length (PDU_LENGTH) reported in the PDUTYPE header is greater than packet length (PKTLEN) from SOURCE_IF This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-0-EMERG
### Response:
(Severity: 0), (Category: PKT_INFRA), (Description: An emergency error has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_MAC_CLEARED
### Response:
(Severity: 4), (Category: OS), (Description: A source MAC address that was previously flagged by the punt flow trap has been removed from the 'penalty box.'), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-6-FIRMWARE_UPGRADE_PWR_OK
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'Firmware upgrade proceeding'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR provide high availability in terms of hardware redundancy?
### Response:
IOS XR platforms support redundancy of critical hardware components including route processors (RP), line cards (LC), switch fabric cards (FC), power modules, and fan trays. IOS XR provides hitless failover to a redundant RP, N+1 redundancy for FCs, and online insertion and removal (OIR) of LCs, RPs, FCs, and other components.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-TX_DISABLE
### Response:
(Severity: 3), (Category: L2), (Description: L2VPN Mgr has signalled at the remote AC has changed state. Due to this the local interface has been enabled/disabled in the TX direction if supported, or enabled/disabled in both directions otherwise.), (Recommended Action: If the remote AC has changed state then this message is expected. If the remote AC hasn't changed state and this condition isn't expected then this may indicate a problem, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_INTF-3-DLL_OPEN_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred opening a dependent DLL and loading its symbols. The process is unable to run.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_ERROR_BUT_NO_CLI_CONNECTION
### Response:
(Severity: 3), (Category: INSTALL), (Description: The incremental install operation has encountered an error. And no 'nopromppt' is supplied in the activation command. The install would ask the user a question as how to proceed.), (Recommended Action: Do '(admin) install attach <install_id>', then answer the question.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-3-NOPACKET
### Response:
(Severity: 3), (Category: IP), (Description: This error occurs when the supplied packet ptr is NULL. Most likely a resource problem within the system.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR1_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-1 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-DEV_QSFP_PID_NOT_SUPPORTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PID not supported error was detected during QSFP+ initialization. A PID not support error is reported when either the PID can not be read or not supported on the platform. The QSFP+ is the pluggable optics on the line cards. QSFP+ initialization may happen when linecard boots up, QSFP+ OIR and line card process restart. The optics will not be enabled if a PID not supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-RX_PKT_BAD_PDU_LEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: A message with invalid PDU length was received from the peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-INVALID_MRPDU_PARSE
### Response:
(Severity: 3), (Category: L2), (Description: An MRPDU packet has been received which MRP could not decode. The MRP infrastructure was unable to parse the packet correctly because certain fields are missing or truncated. The specific MRPDU will be dropped and the protocol will continue to operate. The error string includes details of the position in the packet where parsing failed.), (Recommended Action: Use wireshark or another similar tool to verify the contents of the packet on the wire and ensure it is correctly formed. If the incoming MRPDUs are correctly formed, this error suggests invalid packet metadata. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-NSR_SYNC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred during the NSR sync between active and standby OSPF processes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show tech-support routing ospf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-DB_LOCK_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered while trying to perform an operation on a lock. The thread will continue without retrying the operation. In most cases, no further adverse behaviour should be observed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-BRM_BARRIER_SYNCUP_FAILED
### Response:
(Severity: 1), (Category: FABRIC), (Description: There might be a fabric disconnect in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-NEIGHBOR_LIMIT
### Response:
(Severity: 4), (Category: L2), (Description: The limit for neighbors in the CDP cache has been reached. No more neighbors will be added to the neighbor cache until some existing entries have been removed. The number of entries is limited to defend against DoS attacks.), (Recommended Action: Check the existing CDP neighbors for bogus entries, CDP may be the victim of an attempted DoS attack. The 'clear cdp table' command can be used if CDP neighbor entries need removing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_CERR_V
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Cannot Register with CERR_V subsystem), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR2_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-2 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-SYSDB_GET
### Response:
(Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to retrieve some data from SysDB, so may not be able to function. Installations may not produce the expected results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_FSDB_FADB_LTRACE-3-INTERNAL_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FSDB FADB ltrace lib failed to initialize the internal ltrace), (Recommended Action: Search the event logs for events/errors related to the failure reason. Ltrace usage is common to overall system. If there are failures here then other processes may also exhibit similar problems. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you configure EPC in Cisco IOS XR?
### Response:
To configure EPC in Cisco IOS XR, you need to use the 'monitor capture' command followed by the capture point name and other parameters such as the interface, direction (in or out), and filter conditions.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSP_A_PKT_LTH_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TSP decoder A length error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-XIF_CNTR_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected XIF counter memory multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-LIST_ITEM_COUNT
### Response:
(Severity: 3), (Category: SYSDB), (Description: When sysdb get multiple items operation received wrong number of items), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-PROXY_ECM_EXIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The i2c server proxy process ECM failed due to the reason mentioned in the message.), (Recommended Action: None. The ECM will automatically retry the connection until it is successful.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-RESUME_INCOMPLETE_INSTALL
### Response:
(Severity: 4), (Category: INSTALL), (Description: An incomplete install was encountered - we will attempt to resume the install.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-CORE_FILE_NAME_UNAVAIL
### Response:
(Severity: 6), (Category: OS), (Description: The core dump file name for this crash is invalid.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VLANIFMIB-4-GEN
### Response:
(Severity: 4), (Category: SNMP), (Description: The VLAN Interface table relationship MIB encountered an internal error during initialisation. It is likely that an SNMP query that was in progress will not have been completed.), (Recommended Action: Retry the operation that caused the message to be displayed. It may help to restart the SNMP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support traffic engineering?
### Response:
Cisco IOS XR supports traffic engineering through MPLS-TE, allowing for the optimization of network bandwidth usage by directing traffic flows across predetermined paths based on network resource availability and requirements.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-ODN_ON_UNSUPPORTED_ROUTE
### Response:
(Severity: 4), (Category: L2), (Description: On Demand Nexthop (ODN) or Automatic Steering (AS) is only supported on a subset of EVPN Route Types, and only some SR-TE tunnel types are supported. A Segment-Routing Traffic Engineering (SR-TE or SRv6-TE) tunnel was received on an EVPN route which does not support it, and will be ignored.), (Recommended Action: Unconfigure or modify the route-policy coloring (at EVPN evi or BGP neighbour attach point) which results in coloring routes not explicitly supported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-NV_FABRIC_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: An satellite fabric interface was shut down or brought up by a nV CFM MEP after a fault condition was detected or cleared. The (auto-generated) MEP details can be used to identify the nV CFM MEP in the standard CFM show commands.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_MEM1_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR MEM1 Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR3_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-3 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-MPLS_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Service-layer's registration with LSD failed.), (Recommended Action: Service layer's registration with Label Switching Database failed. If this is seen during programming the Service layer, retry registration. If this is seen during recovery from a process restart, look at Service layer traces for more information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_BAD_SOCKET_ADDR_LENGTH
### Response:
(Severity: 3), (Category: ROUTING), (Description: A packet which IS-IS has received from its network socket contains a socket address with an invalid length. This is an internal software error which indicates that the packet has been corrupted after being received by the local router but before being received by IS-IS. The problematic packet has been dropped. If this is an occasional problem then IS-IS should be able to continue operating normally when the packet is resent. If the message recurs, then IS-IS may start to operate incorrectly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_GIFT-3-MBR_RETRY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The hardware configuration for the Bundle member has reached the maximum number of retries. Hitting this error typically indicates that the member interface has either hit physical interface creation failures, or has not been cleaned up properly.), (Recommended Action: Reload the relevant LC(s) to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_TCAM_MGR-7-INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of SSE TCAM Mgr process has failed due to one of the following reasons: 1) Failed to initialize event manager. This would prevent process from receiving events. 2) Failed to initialize the EDM for the IPv6 Prefix Compresssion Library. 3) Failed to initialize the IPv6 Prefix Compresssion Library itself, which inits the default compression entries. 4) event_block failed. This indicates process has encountered unexpected error while waiting for events.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VMANCLNT-3-VMAN_ERROR
### Response:
(Severity: 3), (Category: LIB), (Description: Error messages from virtualization manager client library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_MBIST_CHANNEL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates possible fault with the NP HBM memory. Displays the channel error associated with the MBIST operation.), (Recommended Action: The line card needs to be returned for repair.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-4-HW_READ_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an error message in the RDM lib to indicate that it failed to perform a hw read of specified NPU instance due to the specified reason.), (Recommended Action: This is a fatal error and it wont be recovered automatically. LC need to be reloaded. If the problem persists after the same, call TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-INTF_HANDLE
### Response:
(Severity: 6), (Category: IP), (Description: 'Interface lookup failed for source-interface'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-REG_SEC_DEL_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Sysdb is attempting to del a registration that does not exist in its secondary registration context.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-7-ERR_SEND_EGRESS_IPSLA_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Internal Error), (Recommended Action: a Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-REGISTRATION
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected error occurred when the VTY Device DLL asked the TTY Server to perform a TTY management operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR* *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_CONNECT-2-UNLOCKING
### Response:
(Severity: 2), (Category: MGBL), (Description: The TTY Connection library encountered an unexpected error releasing a lock. To avoid the potential for deadlock the process is aborting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-4-DECAP
### Response:
(Severity: 4), (Category: FORWARDING), (Description: This message indicates that an error has occurred during packet decapsulation. Particular reason is included in the message.), (Recommended Action: Please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-3-MAX_RETRY
### Response:
(Severity: 3), (Category: L2), (Description: Pseudo-Wire fault request retries reached to its maximum value. It will display function and line here as well. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: This error indicates a problem in the code and cannot be easily recovered from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-LSD_CONN_FAIL
### Response:
(Severity: 5), (Category: ROUTING), (Description: BGP's connection to the LSD has been lost and the connection will be retried.), (Recommended Action: This message may appear after a router reboot or route-processor fail-over event, or after software maintenance operations. If this message is seen only once, no further corrective action is necessary. If this message continues to appear, please call your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_OFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 1 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_ST2
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ST2.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-UNEXPECTED_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the Shelf Manager or Platform Manager encountered a critical system(OS) error. It will exit right away.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-LCL_ATTRIB_ENTER_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: FIB has a limit on the number of local attribute indices it allocates per per table. Check if the maximum number make sense from BGP routes/config.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IPARM_IF
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified IP/ARM request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_8
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PUNT link has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_TTY_DETAILS
### Response:
(Severity: 3), (Category: IP), (Description: An unexpected error occurred when TelnetD tried to retrieve the details of a VTY from a utility library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE3_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE3_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-3-ERR_ORPHAN_COUNT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A partial retrievel of buffers happened for the current process that restarted due to retrieved orphan_count less than actual orphan_count.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-DB_READY_Q
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-MEMORY_RESOURCE_PROFILE_UNKNOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Attempt to retrieve configured memory resource profile from SysDB failed, resulting in activation of the default memory resource profile.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_FULL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to update RIB after RIB restarted.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_SSUA
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from SSUA.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-SYSDB_API_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_IO-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some error occurred in Alloc/Chunk related memory operations. The text of the message displays the failed operation and the related memory construct. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_MODULATOR_BIAS
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-LTRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that ShelfmgrV2 ltrace initialization has failed. Embedded string provides the details of failed function name and the error details.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-TIMER_INIT_FAILED
### Response:
(Severity: 4), (Category: IP), (Description: The IPV6 MA process failed to initialize its timers.), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-4-UNKNOWN_CKN
### Response:
(Severity: 4), (Category: L2), (Description: Received MKPDU contains CKN different from the one active on the interface), (Recommended Action: Check the peer end configuration, and confirm both ends have the same CKN, CAK pair configured)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_PKT_LEN_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error FIA 11 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-IP_ADDR_TOO_LONG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-DUP_RTRID
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPF received hello packet from a neighbor which has the same router-id as this routing process. A full adjacency cannot be established.), (Recommended Action: OSPF router-id should be unique. Change the neighbors router-id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_DEBUG-7-REGISTER_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2VPN component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_CONN_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the planes into which the IOS XR architecture is logically divided?
### Response:
The IOS XR architecture is logically divided into a management plane, control plane, and data plane. The management plane provides CLI, XML, and SNMP based configuration and monitoring. The control plane runs routing protocols, signaling protocols, and other control functions. The data plane performs packet forwarding in hardware.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-GRACEFUL_SHUTDOWN
### Response:
(Severity: 6), (Category: ROUTING), (Description: Informs user of graceful shutdown events. User needs to be aware of these activities.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-ISSU_LOAD_EXEC
### Response:
(Severity: 7), (Category: MGBL), (Description: 'ISSU install notification message for LOAD EXEC Phase received'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LI_EA-3-ERR_IM_CAPS
### Response:
(Severity: 3), (Category: L2), (Description: 1) Li MD could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. This error can happen when a new bundle member is added and the MD can not be programmed successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_PROXY-3-ERR
### Response:
(Severity: 3), (Category: L3), (Description: An internal software error occurred that prevented Route proxy from working properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-FABRIC_CARD_RESET_REJECTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that shelf manager can not comply with the fabric software request to reload a failed node due to the reason mentioned in the message. The fabric software is only to request such an action upon fabric card failures that it can not correct without a reload attempt. Reset requests during shelf manager initialization, or if the state of the card does not support such a request are rejected. For example, if the shelfmgr detects the card to be not present, or already IN_RESET due to failed multiple reload recovery attempts, it will reject the request. Similarly, if the node is UNPOWERED or if it is already being reloaded, the request will be rejected.), (Recommended Action: The user can issue a hw-module reload if they desire to reload the fabric card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-CERRNO
### Response:
(Severity: 7), (Category: MGBL), (Description: The TTY Server has failed to register the TTY error codes with the error subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-UIDB_THRESHOLD_WARNING_PER_NP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The UIDB entry utilization for a specific NP on a specific LC has exceeded the default warning threshold (90 %)), (Recommended Action: Limit UIDB usage accordingly. This is a direct result of interface/sub-interface creation, either statically configured by user input or dynamically created by protocol action. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-4-EVENT_REGISTRATION_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: The PA process failed while attempting to connect to an event manager channel for the indicated subsystem.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-6-CONFIG_SCRIPT_MODIFIED
### Response:
(Severity: 6), (Category: MGBL), (Description: A modification to a currently configured config script was detected, meaning that the script was either created, moved, deleted, or had its contents altered. Unless it can no longer be found, the script will be reloaded. The script will subsequently function as normal, unless the modification introduced any failures, in which case a warning will be output detailing these failures.), (Recommended Action: None, unless the modification was not expected, which must be investigated, or if the modification results in a commit blocker, which must be addressed before further commits are made.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key components of the IOS XR high availability architecture?
### Response:
The key components of the IOS XR HA architecture are\n- Redundant hardware: Includes fans, power, controllers, processors, line cards\n- Process restartability: Critical processes can restart after failure\n- Checkpointing: Allows processes to save state and resynchronize after restart\n- Non-stop forwarding: Packet forwarding continues during control plane failures\n- Graceful restart: Allows routing peers to maintain state across restarts\n- ISSU: Allows software upgrades without traffic loss\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-2-POWER_FAULT
### Response:
(Severity: 2), (Category: DRIVER), (Description: CCC FPGA detected fault on one of the power sequencer device. This is an indication that one of the power rails connected to this power sequencer was detected to have a fault. This will result in card going to POWERED_OFF state, but CCC driver will attempt to recover from this failure by reloadig the card. The card will be placed in POWERED_OFF state if multiple attempts to recover from this failure fails.), (Recommended Action: If multiple card reload operation cannot fix the problem, check if physical OIR can address the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_PFC_MODE_CHANGE
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If moving to or from buffer-extended mode, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with line card reload.), (Recommended Action: System LC is inconsistent. Need to reload the line card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-CONF_SYNC_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: If the source device boots from a non-default disk disk0 check rommon variable BOOT_DEV_SEQ_OPER on the destination node correct the setting if necessary and retry migration If the problem persists refer to upgrade MOP for more information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-BACKEND_EDM
### Response:
(Severity: 3), (Category: OS), (Description: An internal EDM backend function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-OBFL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process failed to log alarms due to the reason mentioned in the message.), (Recommended Action: Collect the logs mentioned in required info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_OFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 0 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL2-3-MSG_NULL_CONTEXT
### Response:
(Severity: 3), (Category: OS), (Description: The pointer to the context passed by bcdl_rack_updown_handler was NULL. This can affect inconsistency between BCDL producers and consumers.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-2-NODE_BRINGDOWN
### Response:
(Severity: 2), (Category: L2), (Description: This is a message in the Asic Scan Server to indicate that it has triggerred a critical alarm and will result in node bringdown. The reason for the failure and the status of the scan operation is reported.), (Recommended Action: Run the board diagnostics.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-DRV_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (spa_oc3_oc12) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-SR_TE_GID_EXISTS
### Response:
(Severity: 2), (Category: ROUTING), (Description: An SRTE tunnel local label object was created with an existing gid value.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-POLICY_COMMUNITY_OVERFLOW
### Response:
(Severity: 4), (Category: ROUTING), (Description: Policy tried to add more communities than a BGP route can hold.), (Recommended Action: Find the affected neighbor with 'show bgp community truncated'. Modify policy on the affected neighbor to delete unnecessary communities.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while using SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-CPP0_FATAL_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The CPP device driver handled a fatal CPP0 error and requested that the QFP-CPU Bridge device driver report the error to the Platform Fault Manager.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_SENSOR_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The sensor in the satellite module reported a critical hi/lo sensor value against the configured threshold value.), (Recommended Action: Verify current sensor temperature values using the CLI: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. --> particularly for temp output of SAT ID. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env trace <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env trace <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-NSR_GLOBAL_SYNC_LOST
### Response:
(Severity: 4), (Category: ROUTING), (Description: LDP Non-stop routing synchronization lost with the standby node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-WARM_BOOT_NOT_POSSIBLE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: There is some unsupported configuration in use, which is not supported by warm-boot. System shall reboot in cold mode. ASIC shall be reset and traffic forwarding would be impacted. If user did not intend warm boot, then this is just an informational message.), (Recommended Action: No further recovery is needed at this point. System shall auto-recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-OVERTEMP_AMBIENT_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Do not insert A9K-NP300-LC on V1 Fantray system. Upgrade to V2 FT and then insert A9K-NP300-LC. For internal testing with ROMMON variable, it is allowed to boot-up. But in case of Inlet temp more than 35.0C, all A9K-NP300-LCs will be put in IN-RESET state. Software won't take any further action after this.), (Recommended Action: Upgrade to V2 Fantray immediately and do not power on A9K-NP300-LC again without upgrading Fan)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOR-4-NULL_PTR
### Response:
(Severity: 4), (Category: INSTALL), (Description: Unexpected parameter value passed to function.), (Recommended Action: This is an internal software error and will be corrected automatically. Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-BGP_LU_UNSUPPORTED_IGP_PATH
### Response:
(Severity: 2), (Category: ROUTING), (Description: In label create/update, bgp lu has unsupported path in IGP), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-ALREADY_DONE
### Response:
(Severity: 5), (Category: ROUTING), (Description: An operation could not be performed because it had already been completed.), (Recommended Action: No further action is required as software should recover automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-5-OOR_THRESHOLD_DOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: Maximum number of groups accepted, either per interface or per vrf.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-EVAL_WILL_EXPIRE_WARNING
### Response:
(Severity: 3), (Category: LICENSE), (Description: The device is using the evaluation period which will expire in the specified time), (Recommended Action: Use the whatever the CLI is for ID token register CLI to register this device before the evaluation period expires.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_IMDR_V1_PREP_CALL_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was encountered while calling the CCI (cpuctrl) cleanup function prior to restarting the process as part of an IMDR operation. The parenthesis contain the error code and the corresponding string description for it.), (Recommended Action: Linecard reload. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_13
### Response:
(Severity: 3), (Category: IP), (Description: De-registration PBU is received for an non-existent binding.), (Recommended Action: Ignore this error message if it occurs only a few times. If the error persists, then do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_EDM-3-LIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-5-MSG_REPLY_ERROR
### Response:
(Severity: 5), (Category: OS), (Description: The message received by an application had a wrong reply data. The message data could be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering interarea tunnels feature?
### Response:
The MPLS traffic engineering interarea tunnels feature allows MPLS TE tunnels to be established across IGP area boundaries. This enables TE to operate in multi-area environments. Interarea TE tunnels comprise hops in different IGP areas and are signaled as a contiguous end-to-end LSP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_ROID_MISMATCH
### Response:
(Severity: 5), (Category: L2), (Description: The peer device has transmitted a different Redundancy Object ID for the bundle to that expected.), (Recommended Action: Ensure that the ROID of the bundle (on both local and peer device) is as expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_PFC_NEED_RELOAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If a traffic-class is added or removed from the config, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with line card reload.), (Recommended Action: System LC is inconsistent. Need to reload the line card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-4-GY_DISABLE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Disabling diameter gy app is not recommended.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-0-OUT_OF_SYNC
### Response:
(Severity: 0), (Category: PLATFORM), (Description: SPA Bridge ASIC register access failure.), (Recommended Action: Reboot the line card. If the problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-REBOOT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: During the processing of a software change notice, the command to get reboot information for this notice failed. The routine will now attempt to fall back on default disposition.), (Recommended Action: Check the install logs if all the packages are downloaded and install operations completed properly Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-LINUX_DATAPATH_STUCK
### Response:
(Severity: 3), (Category: OS), (Description: The Linux packet classifier has been unable to notify a peer thread regarding Linux datapath updates. Due to this issue, PacketIO for Linux applications may now fail.), (Recommended Action: If Linux datapath operation is important, then a process restart of the spp process (a traffic impacting operation) is necessary to recover. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBAPI-3-SYSDB_ACCESS
### Response:
(Severity: 3), (Category: SNMP), (Description: SonetMIB API had trouble registering/deregistering EDM or binding/unbinding SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-BAD_DEVICE_INDEX_ENTRY
### Response:
(Severity: 7), (Category: INSTALL), (Description: 'The package index file was found to be incorrect. Instdir will attempt to' ' repair it.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-CONTEXT_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does System Manager start and manage processes on IOS XR?
### Response:
System Manager starts processes based on the configuration in their process startup files. These files specify process name, path, instances, startup conditions, criticality, and placement. Sysmgr monitors each process and restarts it according to the restart policy if it fails. It can also start processes dynamically when certain config is committed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-3-EVENT_MGR_CREATE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the BGP maximum prefix feature used for?
### Response:
The maximum prefix feature allows a maximum number of prefixes to be configured for a BGP session. If the number is exceeded, the session can either be torn down or a warning can be logged. This protects against misconfiguration or DoS attacks. It is configured with the neighbor maximum-prefix command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-MPLS_SROPT_CRIT_FAIL_LABELSTK
### Response:
(Severity: 6), (Category: ROUTING), (Description: Label stack is NOT supported with SRopt feature. Please check your config. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP8
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-3-CERR_REGISTER_DLL
### Response:
(Severity: 3), (Category: OS), (Description: The call register the dll using cerr_register_dll failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-6-DELETE_CORE
### Response:
(Severity: 6), (Category: OS), (Description: Successfully deleted the core file after copying.), (Recommended Action: This message is information only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-MALFORMED_MESSAGE
### Response:
(Severity: 3), (Category: SECURITY), (Description: A quick sanity check is done on all received ISAKMP messages to verify that all component payload types are valid, and that the sum of their individual lengths equals the total length of the received message. This message failed the sanity check. This continous bad messages could imply denial of service attack), (Recommended Action: 'Contact the remote peer's administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering interarea tunnels feature?
### Response:
The MPLS traffic engineering interarea tunnels feature allows MPLS TE tunnels to be established across IGP area boundaries. This enables TE to operate in multi-area environments. Interarea TE tunnels comprise hops in different IGP areas and are signaled as a contiguous end-to-end LSP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_TAF_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised possibly due to incorrect internal BITS transmitter configuration.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLC-5-NSF_STOP
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-SECURE_BOOT_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: A Secure Boot validation error has been detected on the indicated card. CCC driver will try to recover from this failure by power-cycle the card.), (Recommended Action: If the problem is persitent after multiple retries, it could be hardware related problem with the CCC FPGA, CPU Complex FPGA or BIOS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install remove command in IOS XR?
### Response:
The 'install remove' command is used to delete inactive packages from the router's storage. This helps to free up disk space. Only inactive packages can be removed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSI_NETIO-3-MEM_ALLOC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Fwd basecaps dll was not able to get heap memory.), (Recommended Action: This message could be seen under low memory conditions and should recover once memory becomes available. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-3-BATTERY_LOW
### Response:
(Severity: 3), (Category: MEDIA), (Description: Detect NVRAM low battery state, the data stored in NVRAM may be destroyed after power down the board with battery low state.), (Recommended Action: 'NVRAM Battery may need to be replaced')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-GET_EVM_CTX_BY_TIMER
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to find the event manager context by the given timeout timer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-IO_MNT_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to initialize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_DATAFIND
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-ATTACH_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: STP was unable to initialize IO for one or more interfaces. BPDUs will not be sent or received through these interfaces. The process has restarted to attempt to clear the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_ISSU_NEXT_COMMAND
### Response:
(Severity: 6), (Category: INSTALL), (Description: The run phase of an ISSU operation has finished successfully. Inform the user the operation has not completed yet.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-MSC_140_POWER_DISABLED_STATE_POWER_DOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Board powering down due to power disabled state), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-HFA_REGISTER
### Response:
(Severity: 3), (Category: OS), (Description: An internal hfa_register function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-NOTIF_THREAD_INIT
### Response:
(Severity: 3), (Category: HA), (Description: An error occured when attempting to initialize the event manager thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_TX_HEAP_LOOKUP
### Response:
(Severity: 4), (Category: L2), (Description: An attempt to create a new database entry for a port failed. In addition to indicating that the line card is running low on system resources, this suggests that the shared-memory database is out-of-sync with the main database. Once some system resources have been released, the bundlemgr_local process should be restarted to retry the timer creation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOL_MAPPERE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_BIND
### Response:
(Severity: 7), (Category: INSTALL), (Description: The communications infrastructure may not yet be up. If this error persists, the Install infrastructure may not be able to operate), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_NETIO-3-INIT_DEBUG
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of debug for the NetIO caps. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does the Sysdb process collaborate with Install Manager in IOS XR?
### Response:
The Sysdb process collaborates with Install Manager in IOS XR by allowing the instdir process to use several trees in its namespace. The command requests passed from the instcmd process and the status of command executions by instdir are all communicated via different trees in the Sysdb.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_AUTH_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The device has not communicated with Cisco for an extended period of time and the device has not automatically renewed the entitlement authorizations. Software upgrades will be blocked once the upgrade grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Customer needs to obtain a new ID token from the Cisco CSSM portal CSSM virtual account and re-register the device with CSSM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SYNC-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Error during initialization of domain_sync daemon.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM_PLATFORMS-2-ERR_STS
### Response:
(Severity: 2), (Category: L2), (Description: Error in cem operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_IWF_IF_SES_TRSHLD_NO_EX
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address on the given access interface is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_LPTS-3-FGID_DB_RETRIES_EXCEEDED
### Response:
(Severity: 3), (Category: FABRIC), (Description: A software error occurred, when the PA(Port Arbitrator) attempted to allocate FGID's from the FGID aggregator.), (Recommended Action: The process lpts_pa will attempt to recover by restarting. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD_INTF_EA-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an IPv6 address on an interface in IOS XR?
### Response:
To configure an IPv6 address on an interface, use the 'ipv6 address' command in interface configuration mode. RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/1
RP/0/RSP0/CPU0:router(config-if)#ipv6 address 2001:DB8::1/64
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-7-AGENT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-SYSDB
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server has encountered an error using the SysDB Library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-OPTION_NOT_SUPPORTED
### Response:
(Severity: 6), (Category: INFRA), (Description: The specified option is not supported, and will have no impact on the behavior of the install operation. In most cases, this is because the option was added to allow script compatibility with another version/platform of IOS-XR.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_BASE_NETIO-5-UNSUP_MAJOR_VERSION
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: FINT DLL does not support DLL upgrade across major version changes. This will cause netio to take default action to restart for upgrade to take effect.), (Recommended Action: This message indicates that netio will take default action to restart as fwd netio dll does not support dll upgrade across major version number changes. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-ALLOCATE_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: A CPP driver failed to allocate data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-INTF_INIT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon was unable to initialise the specified interface. This is likely caused by a memory resource allocation error. The exact error can be found in the 'show ethernet oam interface' command.), (Recommended Action: Un-configure and re-configure the interface. If that does not resolve the problem, restarting the process will cause a retry of the initialisation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt link failed), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-FPGA_PCI_INIT_FAIL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSH_IPC_EM-3-NODEID_EXTRACT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OSH IPC ethernet media failed to extract nodeid.), (Recommended Action: restart the process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_MGR_COMMON-3-WRITER_DATA_CORRUPTION
### Response:
(Severity: 3), (Category: INFRA), (Description: OBFL failed to write the data stored in persistent storage. This might be due to data corruption by the software or a user altering the obfl storage or files therein.), (Recommended Action: Ensure that no user has altered the files or tried to meddle with the filesystem on /mnt/plog. Process restart of obfl_mgr on the problematic node, will, in most cases resolves the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-CHKPT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: Failed to write/delete the checkpoint entry for the specified tunnel. This may result in inconsistent state after tunl_gre_ma restarts.), (Recommended Action: Remove and reconfigure the specified tunnel.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-LEN_MISMATCH_CLDATA
### Response:
(Severity: 4), (Category: ROUTING), (Description: Interface EAs may store private information as 'client data' on interfaces in AIB. An interface EA made an invalid attempt to change the size of this data. There may be no immediate impact on traffic, but this issue should be addressed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-SERVER_GENERIC_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Attach server failure. %s- Failure message.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-CFS_INIT_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Nvgen server could not initialize the CFS'), (Recommended Action: Collect the show logging output, console logs and error trace. Collect the show nvgen trace output. And contact tac representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Why is a microkernel-based architecture desirable for a carrier-grade NOS?
### Response:
In a microkernel OS, most functionality resides outside the kernel in separate processes with their own protected memory space. A failure in a non-kernel process does not impact the kernel or other processes. This enables fault containment and process restartability without service disruption. Only essential core services remain in the kernel, minimizing the impact of any kernel failures.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-SPI_VLAN_CFG_CREATE_FAIL
### Response:
(Severity: 6), (Category: INFRA), (Description: Indicates that the programming of the SPI flash with the VLAN translation configuration information failed. This implies that the CCC will only control VLAN translation programming for Sysadmin. All other VLAN translation programming will be handled by ESD. In cases where ESD is not running, VLAN programming for non-sysadmin VLAN's will not be done, leading to inconsistent control plane connectivity.), (Recommended Action: Check all logs to determine root cause of failure. May be caused by incompatible CCC PON version, lack of disk space, communication error between ESD and CCC, communication error to send PON commands, etc. Upgrade of PON may be needed. A power-cycle of the board may be required to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_NETIO_LIB-4-FINT_IDB_NOT_FOUND
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The FINT idb is not yet created in netio. This could be a transient condition.), (Recommended Action: Please capture the following information and if traffic loss also is being observed Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-6-RX_ASYNC_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This error is generated when an invalid asynchronous message is received.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-INPUT_SIGNAL_ERROR_ALL_SLICE
### Response:
(Severity: 1), (Category: FABRIC), (Description: Error found on trace between all instances of FIA ASIC and FPGA.), (Recommended Action: Please reload the board in the next maintenance window. If the fault could not be cleared after card OIR, please RMA the card. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an unexpected/invalid state while trying to process an event for a client request. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_ACCESS_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-SET
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the object does not exist or has the wrong type. The details are in the error string.), (Recommended Action: Check that the object to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-RETRYDB_OK
### Response:
(Severity: 6), (Category: ROUTING), (Description: The FIB process had previously detected that there were one or more unresolved prefixes in the Retry database. Those have been resolved now FIB has resumed normal operation.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_POLICY-3-ORA_INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-MISSING_HANDOFF_INDICATOR_OPTION
### Response:
(Severity: 3), (Category: IP), (Description: Handoff Indicator option is missing in the PBU.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE1_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE1_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-3-ERR_ECM_CREATE
### Response:
(Severity: 3), (Category: L2), (Description: The ASIC Error library encountered an error during the creation of the Error Connection Manager.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-PN
### Response:
(Severity: 2), (Category: L2), (Description: The Product Number information is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA), (Recommended Action: No actions are required as this is just an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-DLLINFO_DB_INIT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB maintains a database for interface-type-specific DLL information but was unable to initialize it. The process will attempt to recovery by restarting. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the explanatory detail indicates memory exhaustion, Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-ERR_PKT_OVERSIZED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PDMA SPP Transmit over-sized packet drop.), (Recommended Action: Execute spp_pdma_show_ltrace from the kshell of the card where this message was seen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-GET_PATH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_proxy process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process cctl_proxy location <>' to verify that the process is up and running.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-GTRIE
### Response:
(Severity: 3), (Category: ROUTING), (Description: FIB internally manages its prefix databases using generic tries. An error occurred while processing prefixes using the generic tries.), (Recommended Action: Try restarting the FIB process to see if the problem goes away. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-4-ACCESS_WIDTH_NOT_MATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PIO access to address with an different access width. It is possible to cause access failure.), (Recommended Action: Check the trackback and make sure the access is correct.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NAL-4-SUBSCRIBERS_AFI_DOWN
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the parent interface configuration is modified or parent interface is deleted and subscribers are present on that interface.), (Recommended Action: This is warning to alert the user that V4 or V6 AFI will go down for all IPOE sessions present on parent interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-SEM_OPEN_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Semaphore Open Failed while sending signal to CTRLIO.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALIDINPUT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The input is invalid. The calling function and the command are displayed'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_CLIENT_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq client failed to Register/Unregister with Ingressq Server process. This error is also detected from the client's side. Retrial attempts would be made by the client.), (Recommended Action: 1. Verify the connectivity between the client and the Ingressq process. 'show controllers ingressq clients location <>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-MMAPSHIFT
### Response:
(Severity: 3), (Category: MGBL), (Description: The packet subsystem was not able to initialize memory.), (Recommended Action: The router will not start properly with this condition.\n' 'Call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_LCTRL-7-ERR_INIT_SERVER
### Response:
(Severity: 7), (Category: ROUTING), (Description: The ucp lctrl server could not be initialized.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_MTA_FRM_LEN_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX encountered Rx serdes lane metaframe length error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: bpe LWM reply error), (Recommended Action: Please attempt to correct the error by restarting the process by issuing the command in exec mode -process restart bpe If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the function of the 'install rollback' command in Cisco IOS XR?
### Response:
The 'install rollback' command in Cisco IOS XR is used to revert the router's software to a previous committed state, useful for undoing changes that may have caused issues.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different types of OSPF LSAs and their functions?
### Response:
The main types of OSPF LSAs are\n- Type 1 Router LSA (lists all router's links/states in an area)\n- Type 2 Network LSA (generated by DR, lists all routers on a segment)\n- Type 3/4 Summary LSA (generated by ABR, advertises inter-area destinations and ASBRs)\n- Type 5 AS-External LSA (generated by ASBR, advertises external routes)\n- Type 7 NSSA External LSA (generated by ASBR in NSSA, converted to type 5 by ABR)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Interrupt controller Driver encountered a fatal error and is not able to recover.), (Recommended Action: Please attempt to correct the error by restarting the process. Issue the command in exec mode -process restart longbeach If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLPROD-3-MSG_SEND_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: A call to function for sending BCDL msg to consumers failed. This could lead to inconsistency between BCDL producers and consumers.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-1-ERR_PLANE_CONFIG
### Response:
(Severity: 1), (Category: FABRIC), (Description: The fabric plane configuration for this multi-chassis system cannot be implemented with the hardware that has been discovered. This error may cause one or more fabric planes to stay down which will affect the bringup of the rest of the system. Possible causes could be incorrect admin plane configuration (ie the configuration states that slot 1 is the first card in a plane whereas slot 0 really is) or an incorrectly sized fiber module is inserted in a slot.), (Recommended Action: Check the admin plane configuration to ensure that it corresponds with the actual physical topology of the system. If this configuration looks correct then contact support, otherwise correct the configuration and the system should recover. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'allocate global' sub-command under 'mpls label range'?
### Response:
The 'allocate global' sub-command is used to allocate labels from the global label pool. By default, IOS XR uses per-interface label space. The 'allocate global' command switches the label allocation to use the global label space, which is required for some MPLS applications such as L3VPN and MPLS TE.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-4-WARNING_INTERNAL_SW
### Response:
(Severity: 4), (Category: FABRIC), (Description: The FGID Server encountered the annunciated SW error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-AUDIT_PROBLEM
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license manager encountered a problem during an internal audit. Check the error string to determine what has happened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error in allocating memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-ALL_NPS_FAILED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: 'All active NPs on the line card have non-recoverable failures. The line card is no longer operational and will be reloaded.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-5-SATELLITE_PORT_MESSAGE_RECEIVED
### Response:
(Severity: 5), (Category: L2), (Description: A notification message has been received from a Satellite regarding the operational status of CFM on Satellite fabric links.), (Recommended Action: Depending on the content of the notification message, it may be necessary to adjust the CFM Satellite fabric link configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-WARNING
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv6 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|ipv6] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_CONN_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to connect to the respective component.), (Recommended Action: When this issue happens, it will trigger an automatic restart. Check the status of the respective component because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_MCAST-2-ERR_DLL_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A failure occurred during the initialization of the mpls mcast platform ingress netio DLL.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-UNLOCK_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: An error was encountered during deletion of the configuration lock. This configuration operation (e.g. save/restore configuration, CLI commit) is successful, but subsequent configuration operations could be affected by this error if not corrected.), (Recommended Action: Use 'show configuration lock' CLI to view the pending lock and 'clear configuration lock <lock>' CLI to force deletion of it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-RX_ALARM_FRAME_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For UTI mode alarm is raised if frame error rate exceeds 2%.), (Recommended Action: 1) Ensure valid BITS/UTI signal is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-TARGETNONE
### Response:
(Severity: 3), (Category: SNMP), (Description: A configuration command refers to an SNMP target that has not yet been configured.), (Recommended Action: You must configure an SNMP target before you can refer to it. Examine your configuration. Ensure that the given target has been configured. If it has not, configure it. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>config<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>config<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-MISSING_RULES
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: IM is unable to create an interface/caps due to static information about the resource type being missing. The system may be in an inconsistent state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-PKTDROP_STR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An input packet was dropped for the specified reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-6-FILE_EXISTS
### Response:
(Severity: 6), (Category: OS), (Description: SHMWIN encountered an error condition, the file was existing already.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-LOCK_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: A lock operation on shared resource, called by nvgen failed due to the mentioned error.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-FLT_STACK
### Response:
(Severity: 4), (Category: OS), (Description: Signal info.), (Recommended Action: No action required.Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RVM_MGR-3-ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error message), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCONBKUP-6-INTERNAL_INFO
### Response:
(Severity: 6), (Category: MGBL), (Description: This is a informational message indicating that cfgmgr debug logs have been collected during reload.), (Recommended Action: This is a info message. No action to be taken)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET_LOOPBACK-3-TRACE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize trace in the platform Ethernet loopback component), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_PKT_MAXLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XCVR-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message from the XCVR stating that failed to initialize a debug event type structure provided by the application with the supplied data), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-6-TEST_ISSU_RUN_RELOAD_SLEEP
### Response:
(Severity: 6), (Category: INSTALL), (Description: Informs the user how many seconds the node is sleeping before reloading during a 'test ISSU-run' operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-INIT_ERR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate errors that happened during initialisation. This error is most likely caused by a temporary situation, so is unlikely to occur. %s - indicates the reason for the failure. %s - is the decoded error reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the function of the XML Management Interface in Cisco IOS XR?
### Response:
The XML Management Interface in Cisco IOS XR allows for the configuration and monitoring of devices using XML over secure HTTP (HTTPS), providing a standardized and programmable interface.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-MEP_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: A CCM message was received from a new peer MEP, or a previously-known peer MEP timed out (i.e. its configured loss threshold was exceeded). This message appears because the service which the local MEP belongs to has continuity-check state change logging configured.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_PARM_FORMAT_PART
### Response:
(Severity: 4), (Category: MEDIA), (Description: An invalid parameter value was passed to the driver to format and partition the media device.), (Recommended Action: Check the syntax for the the format command Report this message to TAC if the syntax and device are valid.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure inter-VRF route leaking in MPLS L3VPN?
### Response:
To configure inter-VRF route leaking in MPLS L3VPN, use import and export route-target commands between VRFs. vrf MyVRF
import route-target 65000:200
vrf MyVRF2
export route-target 65000:200
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5347_PLL_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5347 PLL loss of lock detected/cleared for RSP), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_THREAD_MUTEX_LOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error during locking of a RIP resource.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-DUP_REMOVE
### Response:
(Severity: 4), (Category: SERVICES), (Description: The given attachment configuration, which was previously invalid due to duplicate attachments being configured on different interfaces, is now valid as the duplicate attachment configuration has been removed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_PKT_LEN_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 1 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2LIB-7-MUTEX_UNLOCK
### Response:
(Severity: 7), (Category: MEDIA), (Description: A required mutex unlock failed.), (Recommended Action: Contact customer support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-INIT_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An software error occurred while starting up of L2SNOOP process. If this occurred during process startup, then the process may be restarted.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_PKT_LEN_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Packet with invalid length encountered by decoder A on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-3-INTERNAL_PROBLEM
### Response:
(Severity: 3), (Category: L2), (Description: An internal error has occurred, causing the feature to not be able to function properly.), (Recommended Action: The process is automatically restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-REASS_LIST
### Response:
(Severity: 3), (Category: OS), (Description: The list of reassembly servers is incorrect.), (Recommended Action: Please try restarting pifibm_server_lc and pifibm_server_rp processes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-PCI_DEV_RECOVERY_CB
### Response:
(Severity: 3), (Category: OS), (Description: pci devices recovery cb messages), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-4-REBOOT_HIST
### Response:
(Severity: 4), (Category: MEDIA), (Description: Information to collect the logs), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_2_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-DUPLEX_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: CDP discovered mismatching duplex configuration on neighboring interfaces.), (Recommended Action: Configure the interfaces with the same duplex (full or half).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-2-CAL_CHIP_NOT_FOUND
### Response:
(Severity: 2), (Category: MGBL), (Description: Unable to find calendar chip.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_PTHREAD_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_OC_HDR_CRC_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS from FIA header checksum error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_OUTPUT-3-WARN_COMMS_INIT
### Response:
(Severity: 3), (Category: IP), (Description: The FHRP output process communications failed to initialize correctly. In this situation the FHRP output process retries the initialization, but may not recover if the failure to initialize persists. Clients of the FHRP output process (such as HSRP and VRRP) will not be able to send packets until the initialization succeeds.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-ARB_ECTW_RDATA_TO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-SIGNAL_HANDLER_INFO
### Response:
(Severity: 6), (Category: MGMT), (Description: This comes when registration of signal fails due to some system issue), (Recommended Action: The work-around is restart process would resolve the issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2CCTRL-2-MASTERSHIP_DENIED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: SMBus Mastership Denied by Bus-Master Mux), (Recommended Action: Please attempt to correct the error by reloading the card by issuing the command in admin mode -reload location <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR backup tunnel timers feature?
### Response:
The MPLS TE FRR backup tunnel timers feature allows the configuration of hold and delay timers for backup tunnels. The hold timer specifies how long a backup tunnel should remain in place after the protected interface comes back up. The delay timer specifies how long to wait before installing the backup tunnel after the protected interface goes down. These timers help avoid unnecessary backup tunnel churn.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-3-INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The SVI Adjacency Manager Library's initialization has failed. The process will exit and automatically restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-3-CFG_PORT_FAILED_TO_OPEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: After several retries, the configured port has failed to open. The first argument is the name of the configured port and the second argument is the port number.), (Recommended Action: Configure a different port number. show udp brief will show which ports are already being used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-4-IMDR_RESET_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the PSE Driver to indicate that it failed to perform iMDR reset of specified pse instance due to the specified reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of OSPF areas and how do they help with scalability?
### Response:
OSPF allows a network to be divided into areas. An area is a logical collection of OSPF networks, routers, and links that have the same area identification. Areas limit the scope of link-state advertisements (LSAs) and thus reduce the size of the topology databases on each router. This improves scalability in large networks. Areas must be connected to the backbone area (Area 0) via an Area Border Router (ABR).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-CARD_POST_NOT_TRIGGER
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The card is reloaded due to a faulty HW/ASIC. The Online Diags process can't perform the required diagnostic testing on the falling device, hence the card will then be reloaded with XR image.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-6-PAK_SEND
### Response:
(Severity: 6), (Category: ROUTING), (Description: Failed to send a packet. This can happen if other processes involved in packet forwarding are restarting. This may or may not be transient. If the packet which was not sent is HELLO then the EIGRP adjacency may flap if this issue happens long enough for the peer to detect a hold time expiry. If the packet which was not sent is a non-HELLO then the EIGRP adjacency may flap if this issue is seen long enough to exhaust the maximum number of retransmissions.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-SYSDB_EDM_REG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr failed to register with Sysdb EDM. This may be a program level error.), (Recommended Action: Provide the required information to support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD-3-CPI_NOT_READY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ClkCtrl driver detected a card cpi not ready condition), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_CORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE correctable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-FAILURE1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a failure message in the ASR9K platform specific code software to indicate anomolies that are not serious failure. This failure is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect console log, traces * SH_CMD show af-ea ipv6 trace errors loc <slot number> * Also notice if the failure message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP_GMP-4-WARN_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The ARP GMP process failed to initialize correctly. In this situation it restarts, but it may not recover if there is a persistant error in the IOSXR system and the ARP GMP is later unable to reestablish its connections and initialize successfully.), (Recommended Action: Try restarting the ARP GMP process. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMPOOL_EDM-1-SYSDB_REGISTRATION_FAILURE
### Response:
(Severity: 1), (Category: OS), (Description: Sysdb registration failure), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-MMAP_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to mmap OIR registers.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-DATAPATH_CMD
### Response:
(Severity: 3), (Category: OS), (Description: The given Pre-IFIB datapath control command returns error.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CBC_WDOG_EXCEED_THRESHOLD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Watchdog stats are collected on active RP.If watchdog toggle is not seen for long time, the message will be displayed.), (Recommended Action: Collect the output from RSP : admin show canbus server-stats location all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-STARTUP
### Response:
(Severity: 7), (Category: SYSDB), (Description: A startup request failed during the second round of callbacks.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-3-DEFAULT_ROUTE_CREATION_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: A failure occurred when attempting to create a default route in the TPA system for the specified vrf. Forwarding for TPA applications (including telemetry) will likely be impacted.), (Recommended Action: Restarting the kim process or unconfiguring and reconfiguring the VRF may be sufficient to recover. A switchover or router reload may be required if this condition persists. This error condition may sometimes be worked around by configuring the VRF to use the 'mgmt' default route. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-6-LIB_AVAIL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INCONSISTENT_CPUTUNES_CONFIG
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting invalid CPU tunes parameter.), (Recommended Action: Use a different valid machine definition file for the virtual service. If the problem persists, then enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install activate auto-abort-timer command in IOS XR?
### Response:
The 'install activate auto-abort-timer' command is used to set a timer for the automatic rollback of an installation if the user doesn't commit the changes within the specified time. This provides a safety mechanism to revert to the previous software set if something goes wrong during the installation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_1_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_CPP_HP_FIFO_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS to CPP high priority FIFO multiple bits error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-BD_INVALID_LS_LAYER
### Response:
(Severity: 3), (Category: L2), (Description: Unable to assign bridge domain because logical switch is not layer2 type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-3-CORRUPT_INSTALL_FILE
### Response:
(Severity: 3), (Category: INSTALL), (Description: An install file is corrupt. This may affect the system in a number of ways including preventing nodes from booting and preventing install operations.), (Recommended Action: First attempt to repair the file using 'install verify repair', this is this least impactful operation. If that is unable to repair the file then if possible 'install remove' the package associated with the file and then 'install add' the pie containing the package. If the file is still corrupt then use a pre-prepared backup disk if available to revert to a previously known good set of software, or failover to standby nodes to start using their set of software files.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_FIND
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_IPC-3-SYSDB_LIST_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates the failure while updating the data items in the system database.), (Recommended Action: Please collect the console log and CLI output. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show cef show cef location <> show cef trace location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-SESSION_THRESHOLD_EXCEEDED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the configured session threshold has been exceeded.), (Recommended Action: This is warning to alert the user that sessions may be near the limit that is configured or entitled.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A failure has occured in the FPD Client during process initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1_LNM-3-REMWARNNOISE
### Response:
(Severity: 3), (Category: L2), (Description: Noise on the link has either crossed or fallen below the threshold value configured by the user for link removal on the controller identified in the message. Video or voice quality may be affected if noise is above the configured threshold.), (Recommended Action: This link requires administrative attention. If noise is at or above the configured threshold, only applications such as MLPPP bundles support automatic removal of links from bundles. For other applications, the administrator may need to remove/replace this controller from service. If noise is below the configured threshold and was previously taken out of service by the administrator, the administrator may choose to put this link back into service or wait until noise has fallen below minor-warning level threshold. For an MLPPP link, this will be done automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-SLOT_SPECIFIC_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that an operation to get Card Control Block CCB for specific to a slot has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-INTERNAL
### Response:
(Severity: 3), (Category: OS), (Description: Serious problem occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-EVENT_CONN_ERROR_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: After detecting an error with the connection to the specified service, IS-IS failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-4-INIT_ERROR
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: bfm encountered a error and is not able to recover from the error trying again. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-BAG_ENCODE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to encode a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-KEYRING_NOT_FOUND
### Response:
(Severity: 6), (Category: SECURITY), (Description: Keyring not found in IKEv2 profile.), (Recommended Action: Configure and attach keyring to IKEv2 profile.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PHYS_COMMON-6-AINS_STARTED
### Response:
(Severity: 6), (Category: L1), (Description: The notification Indicating Successful (Re)Start of Automatic In-Service Soak Timer), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-RP_ISOLATION_RESET_REQ
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that RP Isolation is in force, CPU reset request for the target slot is ignored.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-3-FAILED_TO_ACCESS_KSH_REPARTITION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Some existing eUSB may have wrong FS or partitions. Check if need to reformat the eUSB. This message will get printed if there is failure in accessing the Ksh to repartition eUSB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIER-0-PCIE_FAB_FATAL_ACCESS_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A PCIE (fabric block) access error was detected for controller Card. The error prevents this card to perform some vital tasks making it unusable), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-SOCK_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An operation failed during socket initialisation.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-NOTIF_REGN
### Response:
(Severity: 3), (Category: OS), (Description: Unable to register for event_item with sysdb.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_11_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-6-CLOSE_ENET_DEVICE_INFO
### Response:
(Severity: 6), (Category: OS), (Description: Faliure to close the connection to ethernet server.), (Recommended Action: Informational message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-DBEXIST
### Response:
(Severity: 6), (Category: ROUTING), (Description: OSPF has an invalid duplicate copy of an LSA, which could lead to a memory leak.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the additional following commands: - show ospf database - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB_CLIENT-4-ADJ_SANITY_CHK
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB entries have somehow set REMOTE_FLAG for TX ADJ. This should not happen - remote flag should only be set for RX ADJ.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_OPTICS_SUPPORTED_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An supported error was detected during optics initialization. This error is reported when the optics type can not be determined or it is not supported on the platform. The optics is the pluggable optics on the line cards.Optics initialization may happen when linecard boots up, optics OIR and line card process restart. The optics will not be enabled if an optics supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the optics with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NCS4K_4H_OPW_QC2-3-THRD_ACCESS_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: THRD Access failed), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_FC_OOS_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-6-OPTICS_INSERTION
### Response:
(Severity: 6), (Category: L2), (Description: Optics module has been inserted. %d - indicates the bay number), (Recommended Action: None. This is an informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-PTHREAD_DETACH
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemon was unable to detach the thread. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-BAD_PIE_FORMAT
### Response:
(Severity: 7), (Category: INSTALL), (Description: The PIE file is in an obsolete format or is unknown.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-UNKNOWN_BOOT_REQ_MSG_VER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shelf manager received a version of boot request message that it cannot support.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_7_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-MAM_MAX_RES_BW_NO_VALUE_DEPRECATE_NOTICE
### Response:
(Severity: 5), (Category: ROUTING), (Description: Interface bandwidth mam max-reservable-bw is being configured without \ specifying a value. This is not supported in XML and YANG models.), (Recommended Action: Use the 'mam [percentage] max-reservable-bw <Value>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_1_FIA_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error from FIA for NPU-1 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'area default-cost' command in OSPF?
### Response:
The 'area default-cost' command is used on an Area Border Router (ABR) to specify the cost of the default route that it generates into a stub or NSSA area. By default, the cost is 1. Increasing this value makes the default route less preferred. This is useful for controlling how traffic from the stub or NSSA area exits the area when there are multiple ABRs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-6-PAK_MEM_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Find out physical memory information from SYSPAGE. If more memory is found than our defined minimum MIN_RESERVED_MEM, then a scaling factor is created to scale the number of packets, particles, etc, upward. Packet memory information like size, starting, scaling are shown), (Recommended Action: Information message only no action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-6-OPENERROR
### Response:
(Severity: 6), (Category: MEDIA), (Description: Check the state of the device pointed by path. Device may be inaccessible.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-OPTICS_FPD_UPGRADE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to complete FPD upgrade for the Optics due to an internal software or Hardware error. The error message describes the error.), (Recommended Action: Move the Optics to Laser Shut State before performing FPD Upgrade and do the Optics OIR or MPA reload to recover the Optics from Fault state. If the issue occurs under other conditions, then copy the error message exactly as it appears on the screen and collect console log and - sh platform - sh install summary - sh version - show tech-support ethernet interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-ASIC_FMEA
### Response:
(Severity: 3), (Category: FABRIC), (Description: Asic FMEA Fault Report), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_MUTEX_INIT
### Response:
(Severity: 7), (Category: OS), (Description: A internal mutex operation has failed. This is a bug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_14_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-RESET_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected an error. Device is not coming out of reset.), (Recommended Action: Please contact technical support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB-5-ltrace_init_error
### Response:
(Severity: 5), (Category: PLATFORM), (Description: fpoe: ltrace_init2 for errors trace failed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR3_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-3 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_WAVL_INIT
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an unexpected error which prevents it from functioning. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLTLV-6-MSG_GENERIC_ERROR
### Response:
(Severity: 6), (Category: OS), (Description: BCLS TLV processing hit some error condition.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-ENGINE_TIMER
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred while processing the engine thread timer wheel. This may cause CCMs not to be sent, or peer MEPs not to time out after the configured loss time.), (Recommended Action: The process may recover after 60s. If the problem persists, it may be possible to recover by restarting the 'cfmd' process on the node where the problem occurred.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVC_CREATE
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_EVENT_CONN_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for disconnection or connection error event. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-FILE_SYSTEM_SWITCHOVER_PERFORMED_PRE_RELOAD
### Response:
(Severity: 6), (Category: INFRA), (Description: When applying some versions of software, it may be necessary to update the file system to use the new software before a reload is performed. Any processes that were already running, will continue to use the old software until the reload has been performed. Any processes that are (re-)started will use the new software and meta-data. The new software may be incompatible with the older software, and so any communication between new processes and old processes cannot be guaranteed to be compatible, increasing the chances of an abnormal restart. It is recommended to not perform any operations, via any manageability interface, until the system has reloaded - unless specifically requested.), (Recommended Action: Do nothing, until the system has reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_MPLS_ATTR_GET
### Response:
(Severity: 3), (Category: IP), (Description: Cannot determine whether MPLS is enabled or not on the interfaces), (Recommended Action: Restart IPv6 ND)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-TRANSCEIVER_ENABLED
### Response:
(Severity: 6), (Category: L2), (Description: This informational message indicates that the optic interface module was enabled on the given interface after 'no shut' was applied to the optical controller.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-1-FC_OIR_ALERT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 1) An alarm has occured. The Fan Controller card has been removed. 2) A previously occured alarm has been cleared. The Fan Controller Card has been re-inserted.), (Recommended Action: Two possibilities to this message. 1) An alarm has occured : Insert the Fan Controller Card. 2) A previously occured alarm has been cleared : *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAAD-2-CRITICAL_ERROR
### Response:
(Severity: 2), (Category: MGBL), (Description: A critical error was encountered. The failure of this can be critical to general system operation. If the same error is seen more than 5 times, contact Cisco TAC support because a reboot of the node may be required.), (Recommended Action: Provide the message details to Cisco Support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-7-VERIFY_APPLY
### Response:
(Severity: 7), (Category: OS), (Description: A sysdb verify/apply callback information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-CAPI_CONNECTION_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Connection to mentioned CAPI service failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-6-DELETE_SHIM_ENTRY
### Response:
(Severity: 6), (Category: L2), (Description: Debug Information - Deleting shim info entry for the given interface handle), (Recommended Action: *None*.Informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-PAKMAN_EVENT
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error has occurred and pak manager sent us an event. If we can't recover from the error (ABORT event), OSPF will exit.), (Recommended Action: This is an indication that error(s) has occurred in pakman No specific actions are required for OSPF.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-TARGET_CFG_LOCKERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process failed to obtain exclusive lock for this session. Terminate the other open sessions and try again.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NH_LOCK_RECURSIVE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to lock a nexthop entry in the BGP nexthop Table database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-INVALID_ADDRESS
### Response:
(Severity: 6), (Category: IP), (Description: 'The call to ip_addr_c_get_v4/v6_best() returned an invalid address'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD-4-WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a warning message from FPD operation.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-NO_HB_RECEIVED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This indicates that something is wrong in shelfmgr's ability to receive Heart Beats, OR there are simply no cards sending HBs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHEMA-7-INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: An internal error has occurred in the schema server or library. Some management functions may not operate correctly.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-REDIST_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The RIB returned an unexpected error when IS-IS attempted to (de)register for the redistribution of routes in the specified topology and owned by the specified protocol. If this is a registration error then routes from the specified protocol may not be advertised in IS-IS's system LSPs. If this is a deregistration error then IS-IS may receive unnecessary redistribution updates from the RIB but the system LSPs will be correctly generated. The problem may be caused by a low memory condition but is most likely to be an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS and/or the RIB processes. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_IFM-3-WARN_LIB_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: A failure occured in the CPP IFM Library that may affect the functionality of CPP.), (Recommended Action: *SH_CMD debug controllers pse qfp interface ifm all all * *SH_CMD show controllers pse qfp interface ATM R/S/I/P info * *SH_CMD show controllers pse qfp interface ATM R/S/I/P location < > * *SH_CMD show controllers pse qfp interface ATM R/S/I/P statistics *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-DP_MUX_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DP MUX read/write access failure/success), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-ENFORCE_GRACE_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is still enabled after grace period.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_7_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_CLI-7-BAD_BUFFER
### Response:
(Severity: 7), (Category: HA), (Description: A NULL pointer was encountered unexpectedly.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATSD-3-EVENT_BLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: The event handling function returned an error which could not be handled), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-HEADLESS_RSP_DETECTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This card has stopped receiving heartbeat messages from the RSP. It will therefore reset itself as it can not communicate properly with the RSP.), (Recommended Action: Please collect the following information and contact your Cisco technical support representative. 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_16P_OC48-3-DEVICE_INTR_CLEAR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The previously reported excessive interrupts condition has been cleared. Interrupt rate limiting has been disabled.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-RELOAD_TIMED_OUT
### Response:
(Severity: 3), (Category: INFRA), (Description: Router did not reload within expected duration after image was installed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-PRODUCER_HDLR
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred in the ATM VCCLASS producer handler while processing requests from the consumer.Internal failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-WATCHER_THREAD_INIT
### Response:
(Severity: 3), (Category: HA), (Description: An error occured when attempting to initialize the cpu watcher thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-MISSING_NODE_NFN
### Response:
(Severity: 7), (Category: SYSDB), (Description: No node down notification was received from the underlying infrastructure for a recent node reload.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT_SHOW-7-NODE_PRINT
### Response:
(Severity: 7), (Category: OS), (Description: The show helper was unable to decode a text name for the node id a given trace block containing string data came from. As a result of this, the given trace will not be printable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP7
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-PEERSEXIST
### Response:
(Severity: 3), (Category: ROUTING), (Description: One or more peers exist on an interface which is being deleted and hence the interface may not be deleted completely in EIGRP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-6-SKIPPING_RESET_STANDBY
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Skipping an API reddrv_reset_standby when rmf reference is removed.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON_PROXY-3-INVENTORY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon Proxy process failed to initialize. The System Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-6-NOT_SUPPORTED_CARD_TYPE_NG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This command is not supported on RSP880/A99-RSP/RP2 card.), (Recommended Action: 'Please use show controllers epm-switch <cmd> location <node>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-NODES_DROPPED
### Response:
(Severity: 4), (Category: INFRA), (Description: The install orchestrator has not been able to confirm some nodes after a user requested apply by reload. The ongoing transaction will continue without these nodes. Once the transaction is committed, they will no longer be held down. If they come up with software that does not match that of the active RP, they will then be reimaged.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-CPIF_SCSM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected SCSM multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_DLL_UNKNOWN_FUNC
### Response:
(Severity: 3), (Category: MGBL), (Description: 'An error occurred when trying to locate the dll function in DLL.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the main steps performed by the TURBOBOOT process?
### Response:
The main steps performed by TURBOBOOT are\n1. Checks the size of the boot device to ensure sufficient space\n2. Cleans up the boot device by deleting old files and directories\n3. Copies the packages from the .vm file to the boot device\n4. Creates necessary directories and links on the boot device\n5. Validates the packages and generates an inventory\n6. Hands over control to the System Manager (sysmgr) to start the IOS XR processes\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-SERVER_CONNECT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and server, perhaps because the communications infrastructure is not yet up. The MBI operation in progress will not be carried out.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_4_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-NH_CLIENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured when trying to clear redist information for a client.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-FPGA_MEMORY_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC FPGA detected memory errors . Although its rare to encounter these errors,it impacts CCC FPGA functions. During these errors being experienced by CCC FPGA there are possiblbities of read/write issues to CCC FPGA registers. Also alarms shall be raised by envmon for sensor related accessibilities as CCC FPGA wont be accessible due to errors), (Recommended Action: Try reloading the card using 'hw-module location <> reload'. If multiple card reload operation cannot fix the problem, check if physical OIR can address the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does SysDB help achieve high availability in IOS XR?
### Response:
SysDB contributes to high availability in several ways\n- Config and persistent state are replicated between active and standby RPs\n- Processes can resynchronize their state from SysDB after a restart\n- Processes can register for notifications to detect config changes and operational state updates\n- Schema enforcement and config validation prevent invalid state from being propagated\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-ATTACH_PORT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath encountered an initialization error), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_RESYNC_INCONSISTENCY_DISCONNECT
### Response:
(Severity: 5), (Category: L2), (Description: A resync failed to solve an inconsistency and so the local device has disconnected.), (Recommended Action: Disable and re-enable mLACP on either the local or the peer device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATMSNMP-3-IFMGR
### Response:
(Severity: 3), (Category: SNMP), (Description: A high severity error is encountered. The error relates to an interaction with interface manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-DUP_CREATE_ERR
### Response:
(Severity: 4), (Category: SERVICES), (Description: An error has occurred processing an invalid configuration whereby the same service attachment has been configured on two or more interfaces (which should result in both attachments being viewed as failed and moved in to failure state). Packet diversion may now be inconsistent. The error string will give more detail on the type of error that has occurred.), (Recommended Action: For non-resoucre errors, removing the initial misconfiguration may remove this error. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATSD-3-REGISTRATION_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Registration of a stats collector with stats server failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_UNREGISTER_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as old attach point data was being unregistered for new data. As a result, the registration for the old data is still activated for this attach point. As this point is would be best to restart the policy_repository to try to clear this inconsistency.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-META_OPER_WRITE_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: An OBFL internal record type write failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_EEC2
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from EEC2.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-ENFORCE_EVAL_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature has been used exceeding evalution period.), (Recommended Action: The customer should either register for license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-COLD_RESTART_IGNORED
### Response:
(Severity: 7), (Category: HA), (Description: The process has failed to restart multiple times. By design, the process will continue to restart with its existing CDM data.), (Recommended Action: Analyze the restart failure and take appropriate recovery action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-PARTIAL
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-PCIE_FAB_FATAL_ACCESS_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCIE (fabric block) access error was detected for controller Card. The error prevents this card to do traffic switching thereby making it unusable), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO_COMMON-3-SYSMGR_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The process has failed to inform System Manager that it is shutting down. The process will exit anyway, but it is possible that any configuration entered will not cause SysMgr to restart the process. In this case, a timeout will occur when committing configuration, and the config will fail to apply.), (Recommended Action: If configuration fails to apply, recommitting it should correct the issue. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_5_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-GET_MY_NODE_ROLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Node role look-up failed. Packet path initialization at RP errored.), (Recommended Action: Restart the spio_ma process. 'process restart spio_ma location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-LOST_EVENT
### Response:
(Severity: 4), (Category: INFRA), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-1-ERR_HW_RESET_PLL
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error is detected on the PLIM. Software will take action as described in the error message, if not none, to try to recover from the error. The hardware error and the software recovery action will not impact traffic. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error. Recommended user action: %s - recommended action to the user. Possible values: 'none' 'replace XFP' 'PLEASE MANUAULLY RELOAD THE LC AT NEXT MAINTENANCE WINDOW'), (Recommended Action: Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-UNSUPPORTED_FORMAT
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: XRd currently only supports interface names with the format of a physical, non-satellite interface.), (Recommended Action: Check the format of the interface names in the XR_INTERFACES environment variable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-BAD_AVPAIR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_BQS-6-SRTMEMLOW_DECLARE
### Response:
(Severity: 6), (Category: L2), (Description: CPP BQS HW schedule resources have dropped below critical threshold.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-CHKPT_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: After a process restart, an error was encountered while recovering checkpoint memory/database. The running-configuration and hardware programming may be inconsistent. Problems may be encountered with future configuration changes as well.), (Recommended Action: Try to manually restart pfilter-ea. If the problem/log persists, a reload of the line card is necessary. Get the JID from 'show processes <process-name> location <>' 'process restart JID location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-0-FATAL_FAULT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: TX PLL inside the FPGA device is not locked.), (Recommended Action: The software is not able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-STATE_CHANGE_TO_UNSYNC
### Response:
(Severity: 5), (Category: IP), (Description: when the node state change to unsync with the ntp server.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FT-3-IDPROM_ACCESS_FAILED
### Response:
(Severity: 3), (Category: LIBRARY), (Description: Software cannot read the fan tray's IDRPOM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-NO_PROC_READY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Drp_pairing process failed to notify cfgmgr that it is now ready to accept admin config), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SFRAR-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager. Once restarted, it should work fine. The performance will be affected in the only manner that the Static Frame Relay Address Resolution will not be initialized in the worst case.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-6-DEBUG_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB VPLS component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BAG_SCHEMA-4-ERR_EVM_CREATE
### Response:
(Severity: 4), (Category: INFRA), (Description: Bag Schema Server failed to create its Event Manager which is a critical resource for the operation of the process. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-IF_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV4PROTO-7-GET_PAK_HDR_COUNT
### Response:
(Severity: 7), (Category: IP), (Description: There was a problem while getting total packet header count for this node.), (Recommended Action: This could happen if there is a problem with packet shared memory on the node. The transport would restart in this situation, if it restarts once or twice and then recovers, then it could be a transient problem and no action is required. If the transport keeps restarting, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_SERVER-6-UPGRADE_RESULT
### Response:
(Severity: 6), (Category: INFRA), (Description: Update FPD upgrade Status), (Recommended Action: The reason for failed FPD upgrade to be analyzed. Please contact Cisco Technical)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-NETLINK_SOCK_HAS_NO_NETNS
### Response:
(Severity: 3), (Category: INFRA), (Description: The Netlink module contains a dictionary which maps each open Netlink socket to a network namespace file descriptor. The module attempted to look up a socket whose file descriptor is not present in the dictionary.), (Recommended Action: If the problem persists, restart the process. If the problem persists through restarts, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-RACK_DECODE_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: An error happened for a rackid decoding.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-5-OIROUT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Detected a card is removed from the chassis.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-BAG_ENCODE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-1-QSM
### Response:
(Severity: 1), (Category: OS), (Description: A call to the QSM API failed. The server was not able to advertise itself.), (Recommended Action: This is an internal error and should be reported to TAC. The application process making the call has corrupted data or some other internal error. The application should be restarted; if that fails, the router should be rebooted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEAT_MGR-3-MATCH_TYPE_IN_ACL_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The following match criteria specified in an ACL are not supported as part of a QoS policy: Packet Length, TTL, TCP Flags.), (Recommended Action: remove the match criteria from ACL and re-apply)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-RUNNING_ON_NON_PERSISTENT_DEVICE
### Response:
(Severity: 3), (Category: INSTALL), (Description: A Managed node is running software from a non persistent device when it was instructed to use a persistent device at bring up time. Persistent device not available so software will be stored in memory. Expect longer boot times. The node will continue to operate on a best-effort basis but should be looked at soon. You may see out-of-memory errors and problems with package activations on the node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_CORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory correctable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSHD-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: IP), (Description: The server has failed to acquire the required amount of memory), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-4-ERROR_RUN_BMON
### Response:
(Severity: 4), (Category: MEDIA), (Description: pthread_create() returns error. This error occurs when mapping of PLD register for reading NVRAM battery state is failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-6-BIND_INFO
### Response:
(Severity: 6), (Category: OS), (Description: Print socket bind info.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-7-CSPF_FALLBACK
### Response:
(Severity: 7), (Category: OS), (Description: A disjoint path couldn't be found.), (Recommended Action: Check network redundancy.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-EVENT_CONN_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The IPV6 MA process failed to initialize its event conn mgr infra.), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OLM-7-ACTIVE_IPCC_AVAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: An IPCC has come back up or newly configured for a neighbor.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_DEBUG_REGS
### Response:
(Severity: 3), (Category: FABRIC), (Description: Crab debugging registration failure. Its debug infra init failure. May not be related to PD.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-ERR_THREAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PDMA SPP Thread Error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-UNEXPECTED_STATE
### Response:
(Severity: 6), (Category: L2), (Description: Whilst parsing a variable response packet an invalid state was found. This could be an indication of a faulty implementation on remote peer.), (Recommended Action: No specific IOS-XR action needs to be performed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_EA-3-STATE_CHANGE
### Response:
(Severity: 3), (Category: SERVICES), (Description: While the IPSec SVI EA process was checking the state for the specified interface, an error was encountered. The interface in question may be left in an inconsistent state.), (Recommended Action: It may help to restart the IPSec SVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-AUTH_SUCCESS
### Response:
(Severity: 6), (Category: SECURITY), (Description: IKEv2 peer is successfully authenticated using any of the configured remote methods), (Recommended Action: No Action Required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-3-ERR_HW_HARD_RESET
### Response:
(Severity: 3), (Category: L2), (Description: A hardware error is detected on the Datapath FPGA. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause hard reset of a device in the data path and will impact traffic. Device: %s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_0_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-6-REPLAY_EVENT
### Response:
(Severity: 6), (Category: L2), (Description: The recent create/update event for the bundle has triggered validation which resulted in BMT misprogramming.This has resulted in replay call for the bundle.), (Recommended Action: Replay event will correct the corruption.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-4-IPACCESSUNSUPPORTED
### Response:
(Severity: 4), (Category: ACL), (Description: An access list that contains object-groups in one of its entries was specified. At this time ACLs with object-groups are supported only for packet filtering. I.e., attached to an interface.), (Recommended Action: Specify an access list that does not specify any object group in any of its entries.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-DB_DELETE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: SPAN was unable to remove an object from its database. The process will attempt to recover, but it is possible that traffic will not be replicated correctly, or some traffic will not be replicated to the correct interfaces. Standard forwarding will not be affected.), (Recommended Action: This is likely to indicate an internal inconsistency in SPAN. The problem may be resolved by issuing 'process restart' for the affected process on the node that emitted the message. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-ERR_TCAM_PREFIX_COMPRESS
### Response:
(Severity: 5), (Category: OS), (Description: IPv6 prefix compression failed because the line card has run out of internal resources for compressing a preifx. It shouldn't have any major impact on the system service. The in-bound (destined to the system) packets can still reach destinations through SW path.), (Recommended Action: Try either change the prefix length or change the prefix value of IPv6 addressses used in the system if possible.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BOOTVAR-7-CANT_OPEN
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the NVRAM file system is in error, or the boot-variable infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be opened, so processing of the operation will halt. The boot variables may not be available to the system.), (Recommended Action: Check NVRAM filesystem for corruption using the 'fsck' disk check CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ERR_ALM_ONE_LABEL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ALM/LSD API was unable to allocate a requested label.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-0-CRC_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: CRC rate above acceptable level), (Recommended Action: Gather the data listed in 'required_info'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-7-ERR_LRD_EVENT
### Response:
(Severity: 7), (Category: MGBL), (Description: Registration to LRd failed.), (Recommended Action: Restart parser_server process after all cards come up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-SPA_HW_ERR
### Response:
(Severity: 4), (Category: L2), (Description: SPA hardware detected errron on the PLIM. For this no software action is needed.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_RELOAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver encountered an error when trying to reload. The card cannot be reloaded at the time of the message. Fabric driver may retry again when resources and conditions are met. The card and its fabric ASICs should have been isolated from the system.), (Recommended Action: Check the health of the shelfmgr process on the dSC RP. If shelfmgr is healthy, and the card does not reload after waiting for minutes, reload the card with the following command in admin mode: 'reload loc 0/SMx/sp', where x is the SM module number that generated the error. If manual reload does not work, or if the error recurs, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-SATELLITE_UNEXPECTED_NOTIFICATION
### Response:
(Severity: 3), (Category: L2), (Description: An unexpected notification was received for the given Satellite. CFM may fail to function correctly on the Satellite affected.), (Recommended Action: If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was otherwise triggered, then try restarting the CFM Daemon using the 'process restart cfmd location <node>' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-BAY_OPTICS_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: OPTICS enity is inserted into the line card), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-4-EVENTCONN_CREATE_FAILED
### Response:
(Severity: 4), (Category: IP), (Description: The IPv6 IO process failed to create a connection to a server), (Recommended Action: Restarting ipv6_io may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-INTERRUPT_UNMASK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver has been unable to unmask the UART interrupt.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_OPTICS_PWR_SUPPLY_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_LQ_SEQ_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 0 LQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FRAG-7-INIT_ERR
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The Fragment Reassembly Plugin encountered a fatal error during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-NP_PERF_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CPUCtrl Driver encountered an initialization error and may not operate correctly. The supplied text string will explain the reason. Call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-INTF_PARAMS_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: [1] When an interface is configured with a VRF that is not configured globally, it is treated as invalid VRF. SAs should not be created on this interface. [2] When an interface state is not UP SAs should not be created on this interface.), (Recommended Action: [1] 'Make sure to use interfaces with valid VRF' [2] 'Make sure to use interfaces with state UP')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STREE-4-CONNECT_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: stp_process is most likely in a bad state or basic system services have failed. stp_process error messages are generally indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.), (Recommended Action: Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-EDM_CLIENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS EDN client (usually a show command) failled to perform certain operation.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-6-NHDB_OUT_OF_SUBNET
### Response:
(Severity: 6), (Category: ROUTING), (Description: The nexthop of a static route is outside of outgoing interface. This is an invalid configuration.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-ERR_THREAD_FN
### Response:
(Severity: 3), (Category: SECURITY), (Description: The call to pthread functions, such as pthread_create, lock/unlock a mutex or wait on a condition, failed. The error is displayed in the message.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-3-ERR_QAD_EGRESS_QUEUE_MISSING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to find the qad queue for egress packets. This could causes applications using this qad queue not sending out packet %s - QAD queue name %s - thread name), (Recommended Action: Reload the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-TIMESTAMP_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred whilst recording a timestamp. This implies an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CATAPULT-3-ERR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in CATAPULT Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-6-SESSION_USAGE_THRESH_EXCEEDED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Sessions have exceeded 90% threshold Details will be given in the meesage displayed), (Recommended Action: Reduce number of sessions for this particular user.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-REPLY
### Response:
(Severity: 7), (Category: SYSDB), (Description: The server failed to reply to a client request. A likely reason for this is that the process in question has exited.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show process <jid> location all<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show process <jid> location all<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-4-INV_DIAG_CONFIG
### Response:
(Severity: 4), (Category: ROUTING), (Description: Invalid configuration exists for non-linecard location. Diagnostics configuation can be only for linecard slots.), (Recommended Action: Please remove the invalid location from under RCMD diagnostics configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSMLIB-4-EXIT_ON_ERR
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred in the PSE ASIC client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the PSE driver. The root cause may be located in either hardware or software.), (Recommended Action: *RECUR* Copy the error message exactly as it appears on the console)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
sIMP-4-ITI_WARN
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-4-BOARD_POWERUP_WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message is just an warning of different group id in IDEEPROM. Currently this warning can be ignored and continue with the warning.), (Recommended Action: No action required. Ignore this warning.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-4-UPGRADE_ALLOWED
### Response:
(Severity: 4), (Category: LICENSE), (Description: Software upgrades are allowed but will be blocked after the upgrade grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Rectify the upgrade Out of Compliance as soon as possible.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-DEV_LIB_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred when loading the PD library for a specific platform's dll for device access, causing the process to return unexpectedly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IS-IS select the best path to a destination?
### Response:
IS-IS follows this route selection: 1) Prefer L1 path over L2 path, 2) Prefer internal path over external path, 3) Prefer lowest metric, 4) Load balance across up to 6 equal-cost paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-THREAD_MUTEX_UNLOCK
### Response:
(Severity: 7), (Category: OS), (Description: A internal mutex operation has failed. This is a bug.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show process blocked <jobid of dumper>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-ERR_INIT
### Response:
(Severity: 3), (Category: L2), (Description: ASIC scan server has failed the initialization sequence due to the specified reason. This would result in the automatic restart of the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-MPA_ACT2_I2C_READ
### Response:
(Severity: 0), (Category: PLATFORM), (Description: i2c failures during LC Authentication), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather the output of CLIs 'show diag <lc> eeprom-info', 'show tech-support ethernet interfaces'. Please ensure that the MPA type, board PID and serial number are not modified. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-INSTALL_AP_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as new attach point data was being swapped out for old data. As a result, the old data is either still activated, or NO data is activated for this attach point. As this point is would be best to restart the policy_repository to try to clear this inconsistency.), (Recommended Action: Restart the policy_repository process to remedy this situation. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-SYSDB_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The code has hit a sysdb error situation while applying encapsulation config, for which there is no current handling, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-CARD_TYPE
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemon was unable to obtain the card type. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-6-DEBUG_INIT_FAIL
### Response:
(Severity: 6), (Category: QOS), (Description: Debug initialization failed within EA. Debugs may not be printed), (Recommended Action: Try restarting QoS EA process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-BOARD_REMOVAL_PWR_OFF
### Response:
(Severity: 4), (Category: DRIVER), (Description: When partially disconnect the card from midplane, the SEATED_L pin will deassert indicating the board removal event, but if the card is left in that position, it will continue receiving power and it's CPU will continue to run. To avoid improper seated card from continue to operate, CCC driver will power-off the card.), (Recommended Action: When removing a card from system, make sure that connection to the midplane is disconnected in a clean way.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-7-ERRRATE_EXCEED_DEBUG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The fabric driver encountered the annunciated error. The Fabric driver and the System should still continue to function as normal.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-HW_PLAT_INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the LC hardware in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_PROG_BFD_DISC_TBL
### Response:
(Severity: 3), (Category: OS), (Description: The system failed to program BFD discriminator table on the linecard.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-RECVFROM
### Response:
(Severity: 3), (Category: L2), (Description: The socket call recvfrom returned an error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. A Socket level error, nothing to be done.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-RSP_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected fabric parity from RSP.), (Recommended Action: If all other LCs also report this parity error alongwith peer RSP, then check for any bent pins on the RSP for which the problem is reported. Reload the RSP that has the problem a few times. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SM-3-CANNOT_DO_DLL
### Response:
(Severity: 3), (Category: INSTALL), (Description: The install infrastructure failed to open/close/reopen a DLL), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_REPROG_RESOURCE_THRESH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: ASIC errors need to reprogram resource have happened, such errors has crossed threshold.), (Recommended Action: Errors that cause reprogram resource have happened and exceeded threshold. The error condition has been handled.Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-SRGB_LIM_EXCEED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Platform does not support the configured segment routing global-block range. This may result in failure in label allocation and affect feature working until it is resolved. Separate errors will get reported in the event of such an allocation failure.), (Recommended Action: Change the segment routing global-block configuration to avoid exceeding the platform maximum supported label value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-ERR_FLUSH
### Response:
(Severity: 3), (Category: IP), (Description: tcflush() call failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-ERR_EVENT_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize event manager event.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE* Else try restarting manually. Get the job id 'show processes afmon_ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-BANDWIDTH_RANGE
### Response:
(Severity: 3), (Category: QOS), (Description: The minimum bandwidth or shape rate configured is out of the supported bandwidth range at this level. The message will provide further details on the error.), (Recommended Action: Please adjust the bandwidth parameters in the policy map.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_MISSFILENAME
### Response:
(Severity: 4), (Category: SYSDB), (Description: The command entered requires an file name and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR backup bandwidth protection feature?
### Response:
The MPLS TE FRR backup bandwidth protection feature extends the bandwidth protection concept to backup tunnels. It ensures that backup tunnels configured for bandwidth protection have a bandwidth guarantee and do not use bandwidth needed for primary tunnels. This avoids oversubscription on the backup path and ensures that FRR can always redirect traffic successfully.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_RAI_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected RAI defect for incoming signal. Receiving remote alarm indication(RAI) means the far-end equipment over the T1/E1 line has a problem with the signal it is receiving from the upstream equipment.), (Recommended Action: Verify input BITS clock signal is set up correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-RCC_LIB_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot initialize the RCC memory controller library. The node may be not be able to initialized properly.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-PULSE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that an IPC failure has occured in Shelf Manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_SHIM-6-LINK_STATE_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Spanning Tree Port's state change indication.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-MMAP_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: mmap has failed, this may be a program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-TIMER_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A Frequency Synchronization process has failed to process a timer event.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BUF_TOO_SHORT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Whilst trying to format a string, the buffer passed in was too short and the string was truncated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATE_OUT_OF_SYNC-6-UNSUPPORTED_METRIC_ON_BUNDLE_MEMBER
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Some metric types of performance traffic monitoring are not supported on a few types of linecards. User added a new bundle-ethernet member that belongs to a linecard with limitation. As a result, performance traffic monitoring on the bundle-ethernet interface will have limitation on that specific member port. Existing member ports will receive the same metric coverage of performance traffic monitoring. Also, the new bundle member will not be fully activated and overall bundle state will remain out of sync.), (Recommended Action: To restore bundle state to in-sync, the new member should be removed. Otherwise, no action is required. This is informational message to remind user of the fact that new bundle member added by the user resides on the linecard which does not support the metric types configured on the bundle parent interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_8P_GE-2-SPA_JKT_ERR
### Response:
(Severity: 2), (Category: L2), (Description: The Jacket failed to parse spa driver arguments.), (Recommended Action: Check if Jacket process is blocked on any thing. collect the trace log via 'show plim ether trace error location <>' 'show plim ether trace info location <>' 'show tech-support ethernet ' 'show plim jacket trace all location <>' 'sh hw-module trace infra level detailed location' 'sh hw-module trace infra level error location' 'sh hw-module trace infra level summary location' and collect console logs and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-NOVMEM
### Response:
(Severity: 3), (Category: OS), (Description: Not enough memory available for shared memory window in the system. Top shared memory window users will be display on the console.), (Recommended Action: If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show memory location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TIMERNEG
### Response:
(Severity: 3), (Category: OS), (Description: An internal error occured in timer api.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_PEM_NO_INPUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when one of the power cable to power module is unplugged/plugged in on satellite.), (Recommended Action: Please check Power input connections to the satellite.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-3-VIN_LOW_LEVEL_MINOR_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: 'Input voltage level is too low for this module, it crossed the minor alarm threshold'), (Recommended Action: 'Check/Charge the batteries.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-LAS_P_INIT
### Response:
(Severity: 3), (Category: IP), (Description: Failed to initialize as producer of the Local Address Service Database), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IP_EA-3-ERR_INFO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails due to failure during forwarding feature programming. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-DEV_CPAK_COMPLIANCE_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A compliance error was detected during CPAK initialization. A compliance error is due to checksum error, EEPROM CRC error, vendor data error, or decryption error. The CPAK is the pluggable optics on the line cards. CPAK initialization may happen when linecard boots up, CPAK OIR and line card process restart. The optics will not be enabled if an CPAK compliance error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show system verify' command in Cisco IOS XR?
### Response:
The 'show system verify' command in Cisco IOS XR is used to verify the consistency and integrity of the system configuration and software packages. It checks for any missing or corrupted files, inconsistencies in the configuration, and other system-level issues.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECGN-3-PD_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error occured while processing messages from PI or in allocating memory.), (Recommended Action: Collect the following logs. 'show logging', 'show tech-support services cgn location <ISM_location>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZPLL_API-7-ERR_INIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Zarlink client Api initilization failed.), (Recommended Action: Failure action and reason is part of error message. The process will be restarted in sometime. But if error is seen with every restart then contact TAC with show tech-support frequency sync)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-CLEAR_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr clear has failed due to sysdb error.), (Recommended Action: Contact support with required information)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_INIT_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in FIB MPLS. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration. - Resource limitations. This condition indicates a problem where the software has limited resources to operate on.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show memory location <> show cef trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-SENSOR_NOT_FOUND
### Response:
(Severity: 7), (Category: OS), (Description: No sensor found), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SP_NOT_ZERO_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Non-zero seg profile detected on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-LWM
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external light-weight messaging function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-SHMEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shared memory errors during improper updation of variables or incorrect return state in MPLS FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY_LIB-3-BAGDECODE
### Response:
(Severity: 3), (Category: OS), (Description: An attempt to decode a filecopy bag failed. This may be due to like low memory. You may need to free some resources from other processes if the system is running low on memory - if freeing up resources does not fix the problem, please contact your customer support representative and file a bug against the infra-filecopy-srv component.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_GET_FILES
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not get a required the list of files that this package contains, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-GOT_CISCO_VSA
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-IDT_TIMER_FIRED
### Response:
(Severity: 4), (Category: L2), (Description: The specified PTP process has not received all its checkpoint IDTs and so is continuing its initialization without loading all of its checkpointed information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_CORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory correctable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-FSM_LEAF_TIMER_CREATE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has failed to create a timer that is intended to check a nodes boot progress.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-TRACE
### Response:
(Severity: 4), (Category: MGBL), (Description: This is a non-fatal error and can happen when router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-6-NETIO_UP
### Response:
(Severity: 6), (Category: OS), (Description: Pre-IFIB process established connection to NetIO.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_SPU_CLEAR_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: The Firewall Controller's attempt to set an invalid entry in the SPU context table following a firewall delete has failed. This will have left the system in an inconsistent state.), (Recommended Action: Restart the Firewall Controller process using the 'process restart' mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMC_GTRIE_DEFAULT-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error while initializing Gtrie. Initialization failed and aborted), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-IM_OP
### Response:
(Severity: 3), (Category: L2), (Description: The operation on the named item is not completing successfully when it is expected to, and hence the FR support may be disabled. The operation could be one of the following: - [en/de]capsulation remove - caps remove/add - caps base define), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-FSM_T391_EXPIRY
### Response:
(Severity: 3), (Category: L2), (Description: This indicates that Frame Relay Local Management Interface's Finite State Machine has gone into an error condition. We should not have a valid t391 timer expiry event if the FSM for this particular interface was in STOPPED state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-LPTS_DELETE_BINDING
### Response:
(Severity: 3), (Category: ROUTING), (Description: The clns process was unable to delete a binding from LPTS. This is an internal error.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-FATAL_ERR
### Response:
(Severity: 1), (Category: FABRIC), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-MEMORY_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to allocate memory.This error condition indicates a problem with the memory allocation.), (Recommended Action: Please collect the console log and the CLI output. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show cef show cef location <> show cef trace location <> show cef platform trace common all location <> show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> show cef platform services trace common all reverse loc <ISM> Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show cef show version show install summary Also notice if the error message is transient or persistent. Report to your technical support representative. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ASIC_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The asic initialization failed due to the above mentioned error.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-SYSDB
### Response:
(Severity: 3), (Category: OS), (Description: A call to a sysdb interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-4-CAT_ERROR_CRIT_INFO
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The message indicates for ZENGL FPGA catastrophic/fatal event. Node will be brought down on second occurence of such event within default period of three months as per expected software recovery.), (Recommended Action: Once shutdown proceed with unit/board RMA to avoid any probable severe impact on the system as a whole. Please note one can do physical OIR of the Unit/Board to to recover, though its not recomended. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-ENS_REGISTER_CLASS
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens API to bulk register, it returned failure. ens_bulk_register failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-BAD_CORE_SIZE
### Response:
(Severity: 7), (Category: OS), (Description: Dumper calculates the size of core file based on the segment size of the process before dumping the core. If dumper fails to fetch some data of the process due to devctl or anyother reason,the core file will be incomplete.This will impact the core file. It will not impact the traffic or system behavior.), (Recommended Action: Please ensure of enough space is present on the configured device (df -kh . will give you the space statistics of the current disk). If space is less, please remove previous core files. If the issue is still seen, please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. If possible please collect debug messages of dumper.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZEN-3-BACKUP_FPD_LOADED
### Response:
(Severity: 3), (Category: INFRA), (Description: The output of 'show hw-module fpd' will show the affected image with BACK IMG state. This can happens when ZEN detects that Primary image is corrupted, so it fallback to load the backup image to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for ZEN to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM_CAP-1-CFM_RESTART_REQUIRED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: There has been a change (toggle) in 'bundle-offload' configuration. Process restart of cfm is required on active RSP for the changes to take effect.), (Recommended Action: Execute the following command on the console to restart the cfm process: 'process restart cfmd location <Active RSP>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM_COMMON-3-BAD_CHECKSUM
### Response:
(Severity: 3), (Category: MEDIA), (Description: nvram corrupt.), (Recommended Action: If need to use classic configs, boot an appropriate classic image and rewrite the config. If not No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-BLG_RDY_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver detected a fab arbiter ready error (ack not received).), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-NO_VFW
### Response:
(Severity: 3), (Category: SERVICES), (Description: RSPP MA, the service diversion management agent, could not complete initialization as the firewall service package could not be found in the current installed image. Restart will not be attempted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-4-NOT_SUPP
### Response:
(Severity: 4), (Category: L2), (Description: The specified configuration is not supported by the dataplane.), (Recommended Action: If any problems are seen, they may be rectified by removing the unsupported configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVM_SEND
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA failed to send the specified message. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the affected PPPoE MA process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_GSP_GROUP_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered an error to create group for GSP communication. This software error will cause process termination to recover. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_IO-7-ERR_PAK
### Response:
(Severity: 7), (Category: ROUTING), (Description: Some error occurred in Packet (IP/MPLS/ICMP) related operations. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_4_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LAMPTEST-6-ABORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Lamp Test has been aborted due to an internal error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-0-COULD_NOT_AUTHENTICATE_HW
### Response:
(Severity: 0), (Category: DRIVER), (Description: Card manager has failed to authenticate for Cisco HW genuine check This could happen in 2 cases - Secured Local card IDPROM read failed and authentication is not possible - There ACT2 Chip Acess(bus access problem) or Secured Certificate Errors), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-ERR_THREAD_MUTEX_LOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to pthread_mutex_lock() was unsuccessful'), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) Console messages b) show tech-support parser c) follow process nvgen_server d) show proces blocked e) follow process <Name of process on which nvgen is blocked>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SKT_ECTW_RD_PERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-CALLOC_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-ILK_IF_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Punt interlaken interface has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MVRP-4-PROBLEM_EXITING
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during shutdown of the MVRP process, and it was unable to notify the System Manager that it was about to exit. In rare cases, this could result in a failure by the System Manager to restart the process when it ought to do so.), (Recommended Action: If the process ought to be running and is not, then attempt to restart it using the 'process restart' command. If this fails, deconfigure the process and re-enter the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-RESTART_DUE_TO_INSTALL
### Response:
(Severity: 6), (Category: INFRA), (Description: The process restarted due to an install operation. This is expected behavior), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-CIDR_API_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Failure in check_cidr_knob API, input parameter is a NULL pointer'), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) Console messages b) show tech-support parser)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PFI-3-NPU_INST_CREATE_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to create npu id instance. The returned error code should indicate the reason for the failure of the api. This is a transient error in the system likely due to some config events. The client logging this error should retry the api and/or handle this error accordingly. If this error is seen persistently, Initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_TAF_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised possibly due to incorrect internal BITS transmitter configuration.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-RACK_NOT_BOOTED_UP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that there is no rack serial ID to rack number mapping configuration and a rack is trying to boot.), (Recommended Action: In admin configuration mode, please configure rack serial number to rack number mapping using the below command: <CmdBold> dsc serial <serial number> rack <rack number> <NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_LQ_FULL_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 0 LQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC15
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_FWS_FW_NOTFOUND
### Response:
(Severity: 3), (Category: SECURITY), (Description: The Firewall Controller has been told to update firewall information as a result of a firewall state change but has been unable to find the firewall in the firewall database. This indicates that the system is in an inconsistent state.), (Recommended Action: Restart the Firewall Controller process using the 'process restart' mechanism, the firewall controller should resynchronise)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_UPD-3-BACKUP_FPGA_LOADED
### Response:
(Severity: 3), (Category: INFRA), (Description: The Backup images has been loaded on the indicated card. This can happen when process detects that the Primary image is corrupted, and the HW fallbacks to load the backup image to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for FPGA to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
action-3-PEG2MSG
### Response:
(Severity: 3), (Category: OS), (Description: This is a test message for action->peg message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-2-FABRIC_LINK_DOWN_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric link is down.), (Recommended Action: Fabric link is down. Recovery action would be taken. If the error is persistent, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_OVF_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 Tx overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you configure IPFIX in Cisco IOS XR?
### Response:
To configure IPFIX in Cisco IOS XR, use the 'flow exporter-map' command to define the export parameters such as the destination IP address and port, source interface, and version (IPFIX or NetFlow v9). Then, use the 'flow monitor-map' command to define the monitor parameters such as the record format and exporter. Finally, apply the monitor to the desired interfaces using the 'flow' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-ACTIVATION_STATE
### Response:
(Severity: 3), (Category: OS), (Description: The activation state of the named virtual service has changed as notified by Virt-manager.), (Recommended Action: In the failed case, check Virt-manager's logs for the cause of the failure. In the successful case, this notification can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_0_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-NODE_CREATION_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Error in getting rack/slot/module numbers from system database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_4_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-DAEMON_ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while using SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-DEV_CPAK_PID_NOT_SUPPORTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PID not supported error was detected during CPAK initialization. A PID not support error is reported when either the PID can not be read it not supported on the platform. The CPAK is the pluggable optics on the line cards. CPAK initialization may happen when linecard boots up, CPAK OIR and line card process restart. Traffic will not be impacted by this error.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Cisco IOS XR Diagnostics feature in troubleshooting?
### Response:
The Cisco IOS XR Diagnostics feature provides a set of diagnostic tools and tests that can be used to troubleshoot hardware and software issues. It includes tests for the CPU, memory, disk, network interfaces, and other components, as well as tools for collecting and analyzing system logs and dumps.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_12IN1-1-CLOCKRATE
### Response:
(Severity: 1), (Category: L2), (Description: The DTE received clock rate has changed from below the threshold configured to above or vice versa.), (Recommended Action: Check the received clock rate from the provider end and the clockrate threshold configuration. If the clock rate goes below the threshold configured, the interface is brought down.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_LTRACE
### Response:
(Severity: 3), (Category: L2), (Description: BFD SSE was unable to initialize the tracing services. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective MSC reboot.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_EA-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: An error occured in the event loop. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERR_MEM_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> show memory location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WATCHDOG-3-ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: This message indicates that a failure has occured in Watchdog), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-OPERATION_ABORT
### Response:
(Severity: 3), (Category: INSTALL), (Description: Specified install operation in the error message aborted.), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Collect the install operation logs by running 'show tech-support install' on admin as well. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-2-INVALID_PLANE_SHUT_REQ
### Response:
(Severity: 2), (Category: FABRIC), (Description: This indicates that fsdb aserver process has received the request to shut down a fault plane. The plane is not shut down by the fsdb aserver due to the reason mentioned.), (Recommended Action: If the identified plane is not already shut, shut down the plane in admin configuration: controller fabric plane <> shutdown Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered the specified error during the initialization sequence. This facility is deemed crucial and hence the process is automatically restarted on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-VID
### Response:
(Severity: 2), (Category: L2), (Description: The VID information is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA - Enabling power for LC), (Recommended Action: No actions are required as this is just an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-7-RAM_DETAILS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Details about the ECC error happenned before.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-SOCKET_COMMUNICATION_FAILURE
### Response:
(Severity: 4), (Category: DRIVER), (Description: CCC Driver have encountered a fatal socket error. This will lead to ethernet down from the RP/SC on which the syslog is encountered. Recreation of sockets will be tried to recover it.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-5-ID_MGR_OOR
### Response:
(Severity: 5), (Category: L2), (Description: L2VPN ID Mgr keeps track of IDs for different features. If a feature runs out of IDs, new instances cannot be provisioned.), (Recommended Action: Remove unused configuration to free up IDs in the system. Resource limits can be seen using 'show l2vpn capability'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the function of the 'install diff' command in Cisco IOS XR?
### Response:
The 'install diff' command in Cisco IOS XR compares the currently active software packages with those in a specified repository or package file, highlighting differences.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCOUNTING_SUBLABEL_MISMATCH
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when Sub-Lable mismatch between Subcriber Context and FADB.), (Recommended Action: Collect Show tech and generated running core files.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-TABLE_ROUTE_RATE_GLACIAL
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route rate in a table), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_SENSOR_VOLT_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The sensor in the satellite module reported a critical hi/lo sensor value against the configured threshold value.), (Recommended Action: Verify current sensor temperature values using the CLI: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. --> particularly for temp output of SAT ID. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env trace <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env trace <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-INIT_SYSDB_BIND_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Process failed to bind to SysDB while applying encapsulation config. This could be due to invalid arguments, invalid path or an internal error for which there is no current handling, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-DEBUG_RETRIES_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS tried to initialize packet debugging functions but was unable to succeed even after a number of attempts. No more attempts will be made.), (Recommended Action: Please contact the cisco-support in case this error re-occur. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel primary feature?
### Response:
The MPLS TE auto-tunnel primary feature enables the automatic creation of primary MPLS TE tunnels between tunnel head-end and tail-end routers. It simplifies the provisioning of TE tunnels by automatically creating them based on a template configuration. Auto-tunnels are created to next-hop routers learned via IGP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-SYSMGR_PROC_READY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Indicating to sysmgr that the process is not ready %s - Process name %s - error/warning condition), (Recommended Action: Try for process restart If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-7-UNEXPECTED
### Response:
(Severity: 7), (Category: OS), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-LOW_2_5VCC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low in 2.5Vcc voltage. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_USAGE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Incorrect command line parameters were passed to the FGID Server, and so it failed to start.), (Recommended Action: Check the startup arguments passed to FGID-DB. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_INIT_EVENT
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to initialize a sigevent structure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-5-USER_PASSWD_LOCKED
### Response:
(Severity: 5), (Category: SECURITY), (Description: The user is temporarily locked out for exceeding maximum unsuccessful logins. The user gets unlocked automatically after the lock out time is expired.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2TP-3-DIFF_L2TP_CLASS
### Response:
(Severity: 3), (Category: L2), (Description: A new session maps to an existing L2TP tunnel, but the session references a L2TP class different than what this tunnel is using.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_RADIUS_OVRRID_PORT_LIMIT_RCH
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID and Remote ID has reached the maximum which has been supplied via RADIUS.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_QFPCPUCTRL-1-DEV_ID_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Unexpected CPU controller device ID.), (Recommended Action: Replace board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-MALLOC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to allocate memory when copying the context file.), (Recommended Action: show memory, show media, collect console logs. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_LOW_TEMP_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature less than or equal to the low temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSHD-2-ILLEGAL_PORT
### Response:
(Severity: 2), (Category: IP), (Description: The connection between rsh client and server must from/to a privileged port (512-1023)), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is an SMU in the context of IOS XR?
### Response:
In the context of IOS XR, an SMU (Software Maintenance Upgrade) is a software 'patch' delivery unit that, after being installed and activated, provides a 'point-fix' for a critical issue in a given software release.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_LA_QOS-2-VOQ_REACTIVATION_FAILED
### Response:
(Severity: 2), (Category: QOS), (Description: VOQ restore to ACTIVE from DROP failed at ingress when watchdog event is cleared at egress device.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLU-4-CONFIG_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: config will be activated only after a line card reset), (Recommended Action: config will be activated only after a line card reset. Reboot the LC during the next maintenance window.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the two primary security functions of a router in Cisco IOS XR?
### Response:
The two primary security functions are: 1) To protect customer and service provider infrastructure by supporting network security features such as unicast reverse path forwarding (uRPF), access control list (ACL)–based filtering, and prefix filtering. 2) To protect the router from malicious or unintended security attacks and intrusions.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-NULLARG
### Response:
(Severity: 3), (Category: OS), (Description: Invalid arguments are passed to the function.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to malloc() failed while adding the RPs in the range list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_map_agent detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_map_agent detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Using the Job ID from the above commands, run the following to see if the memory is not exceeding. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes memory <Job ID><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes memory <Job ID><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-INVMGR_MAX_SLICE_NUMBER_MISMATCH
### Response:
(Severity: 3), (Category: L2), (Description: The NPU driver received max slice number diff than existing value), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_DUS
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from DUS. The signal is often manually changed to or from DUS to prevent timing loops from occurring. Sending a DUS prevents the timing from being reused in a loop. The DUS signal can also be sent for line maintenance testing.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ltrace buffer could not be initialised), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different IS-IS router types and what level adjacencies do they form?
### Response:
The IS-IS router types are: L1 router (forms L1 adjacencies), L2 router (forms L2 adjacencies), and L1/L2 router (forms both L1 and L2 adjacencies). Two L1/L2 routers will form both L1 and L2 adjacencies if their area IDs match, or only an L2 adjacency if their area IDs differ.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-WIN_MUTEXOP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition, a mutex operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin trace all location 0/x/CPUx - dumpcore running <process name> location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-WRONG_COMP_MAGIC_NUMBER
### Response:
(Severity: 3), (Category: OS), (Description: Core dump file compression header is broken. This will result in a truncated core file.), (Recommended Action: Please validate if the process exists or not. Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-4-MERGE_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: One or more base types were not available when bringing together the parts of this attach point. This is an item that should be caught during testing. If it does show up, support should be contacted.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-UNK_RECOVERY_ACTION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detects an invalid Reset action defined in the Application Fault Condition Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NBR_NSR_DISABLED
### Response:
(Severity: 3), (Category: ROUTING), (Description: NSR has been temporarily disabled on the neighbor due to transport issues.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp confederation identifier' command in IOS XR BGP configuration?
### Response:
The 'bgp confederation identifier' command is used to configure the BGP confederation identifier. A confederation is a technique used to reduce the iBGP mesh inside an AS. The AS is divided into multiple sub-AS, each identified by a confederation identifier. Each sub-AS has a full iBGP mesh, and an eBGP session is used between the sub-AS. To external peers, the confederation still appears as a single AS.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-4-L2_NOT_SUPPORTED
### Response:
(Severity: 4), (Category: L2), (Description: L2transport has been configured on an interface that does not support it. The interface will not enter L2 mode, and will remain in whichever mode it was in before. This will occur if the interface capabilities do not support L2 mode, or if L2 mode is configured on a multilink bundle member.), (Recommended Action: Reconfigure the interface so that l2transport is not enabled.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-WDG_BARRIER_STALLED
### Response:
(Severity: 6), (Category: FABRIC), (Description: Ingressq, Barrier stalled on one of the casts), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-2-CRIT
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: A critical error has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_0_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-3-IM_OPER_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: An interface manager related operation was unsuccessful, leaving the interface in mostly inconsistent state with respect to Session Redundancy. The exact reason for the failure need to be analysed based on the error string being printed. The batch operation could be to register/deregister for an interface state or add/remove of interface capsulation or update of Session Redundancy attribute to IM. The operation has been retried for the specified number of times before quitting.), (Recommended Action: The error is mostly a software problem in Session Redundancy module or the Interface Mananger module - If interface un-registration fails, then it would not have a functionality impact on the software. It could mostly happen when interface config is removed from Session Redundancy or Session redundancy config is itself removed. If the config is added back the system is expected to continue to work without any further problems. - For capsulation remove error, check all Session Redundancy client have been notified of the removal. For Ex: if DHCPv6 is the client, then check the dhcp v6 proxy/server interface state for SERG role. If capsulation removal is notified, then it would not have functionality impact as in the un-registration case. Else troubleshooting is required. - For all other errors trouble shooting is required. Workaround: restart serg_agt/serg_mgr process (whichever process caused error))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the common thread states in the IOS XR microkernel?
### Response:
The common thread states are\n- Running: Thread is currently executing on CPU\n- Ready: Thread is ready to execute, waiting to be scheduled\n- Blocked: Thread is waiting for an event (message, I/O, timer)\n- Receive blocked: Waiting for a message\n- Reply blocked: Waiting to reply to a message\n- Interrupt blocked: Waiting for an interrupt\n- Mutex blocked: Waiting for a mutex\n- Stopped: Thread is suspended and will not be scheduled\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_VERIFY1_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp global-interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp global-interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-INIT_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: An error occurred during initialization, causing the process to terminate.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LINK_WRONG_RESULT
### Response:
(Severity: 3), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_OVF_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA11 channel FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_PFILTER_EA-3-ERR_APPLY_ACE_MOD
### Response:
(Severity: 3), (Category: ACL), (Description: 1) An ACE modification can fail in apply/commit phase because of one of the following reasons: a) TCAM max limit has been reached.), (Recommended Action: 1) When this error occurs the running-config will not be in sync with line card ACL hardware programming. 2) If the ACL could not be removed from hardware a line card reload is recommended.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-ERR_HW_THRESHOLD_SHUTDOWN_PORT
### Response:
(Severity: 3), (Category: L2), (Description: A hardware error is detected on the PLIM, and the error threshold has been crossed. Software will take action as described in the error message to try to contain or recover from the error. The hardware error and the software recovery action will cause shutting down the port. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Threshold of %s - the defined threshold for this error. Software action: %s - the action that software will take to try to contain or recover from the error. Recommended user action: %s - recommended action to the user. Possible values: 'none' 'replace XFP' 'PLEASE MANUAULLY RELOAD THE LC AT NEXT MAINTENANCE WINDOW'), (Recommended Action: Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAIPC_NETIO-7-PAK_INPUT_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: netio_dll_packet_input_NEW() to Qnet failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-RED_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process try to do redundancy related init with System Manager for the node state changes.), (Recommended Action: The process will attempt to recover from this situation by restarting or retrying. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-IFIB_RES_SET_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Failed to set platform-secific IFIB results.), (Recommended Action: Please provide the output of following commands: - show tech-support lpts - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-ERR
### Response:
(Severity: 3), (Category: OS), (Description: An ERROR level message was emitted by QNET.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-MEMORY
### Response:
(Severity: 3), (Category: SECURITY), (Description: locald failed to allocate the required amount of memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-EVENT_FILE_ATTACH_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in event file attach.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-0-BARRIER_STALL_ROUTER_RELOAD
### Response:
(Severity: 0), (Category: FABRIC), (Description: Router is brought down if RPs on the dsc rack are detected stalling on fabric barriers. If the dsc rack is isolated from fabric via CLI, then this is expected. If this message occurs otherwise, it could be due to a software error or an unexpeced hw error.), (Recommended Action: If fabric links, fabric cards or fabric chassis connecting to the dsc rack are brought down via CLI, then this is expected. If the problem happens otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-6-ERR_EVC_DESTROY
### Response:
(Severity: 6), (Category: L2), (Description: During process termination PPP MA failed to destroy a connection to a service provided by another process. This is an internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_XAUI_PLL_LOCK_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI PLL not locked on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMC_GTRIE_DEFAULT-4-WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error. A significant event but we can still continue), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-UNALLOCATED_QUEUE_NOT_EMPTY
### Response:
(Severity: 3), (Category: L2), (Description: Egressq driver detected that packets were sent to an Egressq queue which is unallocated. These packets will not be serviced and will remain in the queue until this queue is allocated and becomes active. This situation should normally not happen, but may possibly happen during transient conditions when egress queue information is being updated (for e.g. on SPA OIR). During this brief time period, one or few packets may be sent to an incorrect queue.), (Recommended Action: If this message appears more than once in response to the specific action taken or if the message indicates a large number of bytes (more than 10MB) in an unallocated queue(s), Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_ADD_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-PULSEQ_ALARM
### Response:
(Severity: 4), (Category: HA), (Description: PulseQ state on this node is below the Severe/Critical threshold.), (Recommended Action: The top 5 pulseq user processes will be dumped to screen. If the state goes to critical state kill the top process/processes in the dumped list.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_PARM_REDFS_ERROR
### Response:
(Severity: 4), (Category: MEDIA), (Description: Redundancy FS got an invalid parameter value when RedFS was trying to recover from storage media issue), (Recommended Action: Report this message to TAC. Capture console log, 'show media', 'show mirror statistic' and 'show mirror trace' for TAC and ddts.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-CONFIG_CHG
### Response:
(Severity: 6), (Category: ROUTING), (Description: This configuration is obsolete; It will be removed from a future release.), (Recommended Action: Remove the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-PAK_PROC_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: There was an packet processing error. Possible causes 1) Unable to retrieve fabric dest addr from inside the pkt 2) Error setting/getting input ifh from pkt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_BURNER-3-BAD_ARG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Bad coammand option.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSA-3-PROV_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Provisioning of specified slice has failed), (Recommended Action: The casue for the provisioning failure has to be analyzed. Collect the show tech logs by running 'show tech-support <platform>' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-6-UNEXPECTED_OPERATION
### Response:
(Severity: 6), (Category: IP), (Description: A client has performed an unexpected operation on an XR socket.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_NPH_LEN_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Invalid egress NPH length detected on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-SPA_CREATE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_spa_server process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process cctl_spa_server location <>' to verify that the process is up and running.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL1_HI_OVERRUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL1_HI_OVERRUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_RECORDROUTE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface record-route has changed.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status record-route' \ interface destination configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVDPMEM-3-BAD_DATAFILE_VALUES
### Response:
(Severity: 3), (Category: OS), (Description: Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-3-RT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This msg can be an indication of incomplete smith driver initialization or an intermittent failure of HW register reads. It may or may not have functional impact depending on cause of failure.), (Recommended Action: Collect the 'show logging' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-AWAIT_FGID_DOWNLOAD
### Response:
(Severity: 6), (Category: FABRIC), (Description: This indicates Fabric ASICs are initialized pending the FGID download done notification from FGID server. FSDB will be notified about the ASIC initialization complete state only after the ASICs are initialized and the FGID download is completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_AHS_LOS_LANE3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-PON_EXIT_FAILURE
### Response:
(Severity: 4), (Category: DRIVER), (Description: An exception has occurred in IOFPGA power-on interpreter while performing an operation.), (Recommended Action: Collect debug info from 'show tech-support iofpga' command and contact your technical support representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-7-ERR_DLL_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: CCSQ driver tried to register for a dll but it encountered an error. The driver might lose some of its functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-SW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The operation is failed due to an internal software error. %d - port number. %s - description of the operation. %s - description of the error.), (Recommended Action: Check if the linecard reported any other errors. May need to restart process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-HB_FAILURE_STATS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SIM heartbeat failed, log heartbeat failure statistic), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-SYSTEM_RELOAD
### Response:
(Severity: 2), (Category: INFRA), (Description: A user requested apply by reload is about to take place which will result in a reload of the entire system. If the apply by reload operation is successful, atomic software changes will be activated after the system reloads.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of using 'install disk-mirroring' in Cisco IOS XR?
### Response:
The 'install disk-mirroring' command in Cisco IOS XR is used to configure disk mirroring for redundancy, ensuring data is copied across multiple disks for fault tolerance.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-HISTGROUP_TOO_LARGE
### Response:
(Severity: 3), (Category: OS), (Description: A historical group is too large, or internal parameter might be corrupted. This might be because of a corrupted record or Upgrade of system.), (Recommended Action: The file should be saved to other place for later debugging, and then it should be removed to recover current situation. Please clear the OBFL files, as it might be because of corrupted records. CLI : admin clear logging onboard corrupted-files location <LOC> If the issue is seen after clearing the files, please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-IO_INITSYNC_FAILED
### Response:
(Severity: 5), (Category: ROUTING), (Description: A problem occurred in TCP sync, retry TCP sync.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-OOR_GROUP_RANGE_LIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: This router has reached the maximum value for the number of group ranges allowed to be received through the given group-to-RP mapping distribution mechanism. This can cause an inconsistancy between routers in the PIM domain as to which RP a group maps. This inconsistancy can cause multicast traffic loss for some or all multicast groups. Steps should be immediately taken to reduce the number of group ranges being distributed by the given mechanism or to configure a higher maximum value.), (Recommended Action: Consider reducing the number of group ranges advertised from some set of the candidate-RPs or consider reducing the number of candidate-RPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-MAC_FLUSH_TIMER
### Response:
(Severity: 6), (Category: PLATFORM), (Description: When MACs are being flushed from a bridge, unicasting is disabled (everything floods) for a period of time. This message indicates a problem with re-enabling unicast in the bridge.), (Recommended Action: User needs to check all bridge domains to see if any are in unicast disabled state using the platform show command(s). The user should remove and re-configure those bridge domain(s).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINK-4-BERTADMINDOWN
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Unable to start BERT because controller in admin down state), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-SYSDB_REGISTER_NOTIFICATION
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-VM_ERROR_CALL_BACK
### Response:
(Severity: 7), (Category: HA), (Description: An error occured in CAPI with VM-Manager.), (Recommended Action: This indicates an issue on CAPI with VM-Manger, Collect show tech HBloss, show tech ctrace, vm-monitor process core.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the BGP AS path attribute?
### Response:
The AS path is a well-known mandatory attribute that contains a list of the autonomous system numbers that the route has traversed. Routes with a shorter AS path are preferred.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-EVM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: PLIM process encountered a software initialization error. LC will not work due to this error .), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. There was problem with hardware or software initilization. This problem can be resolved by reloading the LC 'hw-module location <> reload'. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-4-LOST_RACK_ON_SYSTEM_RELOAD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: We lost connectivity to a rack while the user initiated system reload is in progress. As the entire system is undergoing a reload, it is expected to see the racks going down.), (Recommended Action: This is a warning message for the user intiated reload. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-BUS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A PCIe bus error has occurred. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel primary affinity feature?
### Response:
The MPLS TE auto-tunnel primary affinity feature allows auto-tunnel primary tunnels to select or avoid links for the primary path based on configured affinity attributes. This provides more control over the primary path selection compared to the default behavior of using the TE metric. Affinities allow primary paths to be optimized for specific requirements.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-RESUME_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: An unknown error was encountered as the instorch process started up in an idle state. This may be resolved by manually restarting the instorch process. If this error is seen multiple times please collect tech-support.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-SYNC_REQUEST_UNEXPECTED
### Response:
(Severity: 7), (Category: OS), (Description: When the single writer mode is set, RDS library allowes to create a ticket. Ticket request failed with unknown error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-4-PASSWD_ALREADY_EXISTS
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error has occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-3-FO_INITIATED
### Response:
(Severity: 3), (Category: IP), (Description: TCP's NSR module is initiating a fail-over to maintain NSR because TCP in active role has failed (either crashed or shut down) and fail-over is currently configured as the recovery action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_SYSDB_GET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_IIR_ADD-3-FAILED
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS policy could not be applied on the bundle interface member specified.), (Recommended Action: If there are errors in the policy, remove the qos policy, correct the errors and reattach. If there are no errors in the policy, collect the required information and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_HA_BIND
### Response:
(Severity: 4), (Category: L2), (Description: Failed to bind with the QFP high availability infrastructure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFMMIB-3-NO_DEBUG
### Response:
(Severity: 3), (Category: L2), (Description: In the initialization of the DOT1AG/MEF SOAM MIB DLL an error occurred while attempting to register for debugging. Consequently there will be no debug output from this MIB DLL. Retrieval of elements of the MIB should be unaffected, but any issues with MIB retrieval may be hard to diagnose. The error message should point to a more precise reason, possibly indicating an out of resource issue.), (Recommended Action: The user may continue to work without access to DOT1AG/MEF SOAM MIB debug, elements of the MIB will still be accessible & elements of other MIBs will be unaffected. If the user requires debug, or would rather have debug available should further problems arise, restarting the mibd_interface process will prompt another attempt at debug initialization which may succeed. Before performing a process restart, the user should evaluate the likelihood of a restart resolving the problem. For example, if the error message indicates an out of resource condition, the user should look into and resolve any memory issues on the device before attempting the restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_5_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-AMBIGUOUS_PASSWD
### Response:
(Severity: 3), (Category: SECURITY), (Description: Single digit passwords are not allowed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Cisco IOS XR Precision Time Protocol (PTP) feature?
### Response:
The Cisco IOS XR Precision Time Protocol (PTP) feature allows synchronizing the clocks of network devices with high accuracy. It is based on the IEEE 1588 standard and provides sub-microsecond level synchronization, which is essential for applications such as mobile backhaul and financial trading.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: FABRIC), (Description: An error occured while sending Ingressq LWM reply), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TUPLE_UNKNOWN
### Response:
(Severity: 3), (Category: OS), (Description: Unknown tuple.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-UPDATE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: The Linux Packet classifier failed to program an update of Linux Socket bindings to its database or into LPTS. This may cause packets which should be handled by Linux applications to get dropped.), (Recommended Action: Periodic attempts to bring the databases back into sync will occur. An immediate resync can be trigger by restarting xlncd. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-DUI_VTP_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The NP ASIC has VTP issue. HW init will fail), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-NETWORK_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: An OSPFv3 neighbor ID has been configured over an invalid network type.), (Recommended Action: Check the network type on the underlying OSPFv3 interface or area.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-DPA_SVR_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a message in FIB platform to indicate that engine layer identified an error while programming an object in DPA.), (Recommended Action: Please collect the console log, show tech-support cef platform. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-0-SCRATCH_TEST_EPM_SWITCH_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This is to indicate that EOBC switch scratch register test has failed. This is thrown after consistent read or write failures to EOBC switch.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-ESI_FWD_MISCONFIG
### Response:
(Severity: 3), (Category: L2), (Description: EVPN does not support more than one Forwarder (Bridge port) per EVI in a single ethernet segment unless the EVI is configured with AC aware VLAN bundling. This can be the result of a misconfiguration.), (Recommended Action: Review evpn and l2vpn configuration to determine where additional forwarders (bridge ports) have been configured for the same interface ethernet segment and same EVI, and remove them or configure the EVI with AC aware VLAN bundling.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NSR_PACKET-2-NULL_HDR_AFTER_UNSCRAMBLE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message tells is there was an error after unscrambling the packet and a NULL pointer has been returned.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-4-SWITCHOVER_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: The attempt to switchover role via administrative action has failed due to specified error. This is a warning that router is still in the old role. The use of force option can be done to force the role change overriding the error condition.), (Recommended Action: Check to ensure that the role switchover is still required to be performed and if so, repeat the operation using the force option. If error persists, then it is likely an issue and needs troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message provides information about the kind of events happening in the software at the location where the error is seen. This is not an error message. Typically, following events are logged in this message type. - End of successfull initialization of the software. - Start and end of a processing of new object that needs to programmed to the hardware. - Configuration is not applicable to the port.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-FWD_LOOP_CFG
### Response:
(Severity: 4), (Category: L2), (Description: A possible forwarding loop has been detected in the monitor-session configuration. This occurs when the source interface for one monitor-session is used as the destination for another. If this configuration were applied, it could result in unbounded traffic forwarding. As such, the interface that is both a source and a destination has its mirroring disabled in SPAN EA (i.e. it will continue to act as a destination for SPAN traffic, but not as a source). Use 'show monitor-session status' to identify the set of affected interfaces and to provide more information about their current state.), (Recommended Action: Double check the committed configuration for forwarding loops - an interface is not allowed to be both a source interface and a destination, regardless of the direction of the mirrored traffic.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-2-CPI_NOT_READY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The shelfmgr could not initialize its card presence drivers. This can be caused by an improperly seated RSP card, or damage to the backplane pins.), (Recommended Action: 1. Please issue the following CLI command to switch away from this RSP and make the standby RSP active: <CmdBold>admin redundancy switchover<NoCmdBold> 2. Then reseat the RSP you switched away from very carefully into the chassis, making sure it makes full contact with the backplane pins. 3. During the maintenance window, then switch back to this RSP again and verify the error has gone away. If not, there may be an issue with either this card or the chassis backplane; please contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-SYNC_CREATE
### Response:
(Severity: 7), (Category: OS), (Description: When the single writer mode is set, RDS library allowes to create a ticket. When we tried to create ticket, we failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-IF_IS_PART_OF_VRF
### Response:
(Severity: 3), (Category: L2), (Description: Unable to assign interface because it is part of existing named VRF, first remove this association.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-THREAD_EVENT_BLOCK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DMAC driver failed to listen for packet events on its queue.), (Recommended Action: Restarting spp process on the affected card might solve the problem. To restart the spp process issue the following command on the card on which the error message is observed: 'process restart spp location <LC/RSP>' Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show spp pdma trace all location <LC/RSP><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show spp pdma trace all location <LC/RSP><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-CPU_CTRL_REG_LOCK
### Response:
(Severity: 3), (Category: L2), (Description: Unable to obtain register access lock for CPU Ctrl.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-IFIB_RES_ALLOC_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Failure in allocating platform-specific ifib result structure as a result packet is dropped.), (Recommended Action: Restarting netio may fix this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-PKT_INT_ERR_AT_DDRIF_1_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Packet Integrity Error at DDR interface from Punt/Bridge-1 FPGA on FIA 1.), (Recommended Action: Verify correct version of Punt/Bridge FPGA is loaded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-THREAD_SPURIOUS_PULSE
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS Recevied a spurious (unexpected) pulse value and will ignore it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-3-IPACCESSPTHREAD
### Response:
(Severity: 3), (Category: ACL), (Description: The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Possible causes of this failure are the mutex is corrupted, has not been initialised or is being accessed recursively (this is not allwowed). Because the mutex could not be used, the process may restart to recover from the failure.), (Recommended Action: Please try restarting the process that issued this error message with the command. <CmdBold>process restart <process_name> location <node id><NoCmdBold>. Process name should be printed in the message already.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-5-HA_INFO
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Display HA test info.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN_SHM_LOCK-3-GENERAL_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: General error in nvgen client library'), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) Console messages b) show tech-support parser)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-6-MAP_SERVER_SITE_ALL_REGISTRATION_EXPIRED
### Response:
(Severity: 6), (Category: IP), (Description: 'The Map-Server cannot forward Map-Requests to the site ETRs.'), (Recommended Action: 'Check the problem site ETRs to diagnose why ' 'the EID prefix registrations can not reach the MS.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-4-BVI_MAC_REPROGRAM
### Response:
(Severity: 4), (Category: L2), (Description: We have detected an attempt by the control plane or by the local learning module to reprogram the BVI MAC as belonging to a different interface. This will break forwarding and therefore is disallowed.), (Recommended Action: - Check which host in the network might be advertising the BVI MAC - Check if the network is subject to a switching loop and/or L2 storm - Clear the locally learned mac address table; (<CmdBold> clear l2vpn forwarding mac-address-table <NoCmdBold>).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different MPLS TE FRR protection modes?
### Response:
The different MPLS TE FRR protection modes are\n- Link protection: Protects against link failure. Backup tunnel is routed around the protected link.\n- Node protection: Protects against node failure. Backup tunnel avoids the protected node.\n- Best-effort protection: Tries to protect against both link and node failure, but does not guarantee it.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_CONN_OPEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-4-ERR_SYSDB_EDM_REG
### Response:
(Severity: 4), (Category: FABRIC), (Description: The FIA driver was unable to become an external data manager (EDM) despite having a connection to SysDB. The operation will be retried.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-6-FIRMWARE_UPGRADE_PWR_CHECK
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'System is checking power supply redundancy before proceeding'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_EA-3-INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the VASI EA process on a particular node. The process will be restarted. Until the process starts successfully, any VASI interface pairs located on that node will not come up. (If there is a standby node the interfaces should come up on the standby).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIO-7-ERR_MEM_ALLOC
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The EIO library was unable to allocate memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VEEA-4-BCMDPA_L1_PORT_UNSUPPORTED_LLFC_ON_PFC_ENABLED_INTF
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PFC and Flowcontrol co-existance is not supported. If flowcontrol is enabled on a PFC enabled interface, we dont reject the config but flowcontrol is not enabled in Hw and wont work as desired.), (Recommended Action: Unsupported config, fix config. For flowcontrol to work remove PFC config and remove/readd flowcontrol.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-7-DLRSC_UNKNOWN
### Response:
(Severity: 7), (Category: OS), (Description: PlaceD was unable to get dLRSC from local lrd.), (Recommended Action: None - PlaceD should restart and recover by itself.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-SYSDB_BIND
### Response:
(Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to bind to SysDB (perhaps because the communications infrastucture is not yet up), so will not be able to function. Installations will be unlikely to produce the expected results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY_LIB-3-BAGENCODE
### Response:
(Severity: 3), (Category: OS), (Description: An attempt to encode a filecopy bag failed. This may be due to like low memory. You may need to free some resources from other processes if the system is running low on memory - if freeing up resources does not fix the problem, please contact your customer support representative and file a bug against the infra-filecopy-srv component.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_LRD_SPA-3-STATE_UPDATE
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occured while processing a SPA state or type change notification. Service interfaces configured on the given SPA may not be appropriately (un)replicated.), (Recommended Action: Restarting the process in question should rectify the situation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-3-AUTH_VERIFY_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: With IKEv2 certificate authentication, sender(initiator/responder) needs to sign the AUTH DATA using the private key corresponding to the leaf certificate, receiver will use the public key of senders X509 certificate to validate the sender's AUTH payload this error will be printed when certificate is not received as part of AUTH payload or certificate is expired or certificate is not yet valid or certificate verification failed or signature verification failed or issuer certificate is not known), (Recommended Action: On Receiver, ensure valid trustpoint with senders issuer certificate is present, example: clear the old certificates from trustpoint using 'clear crypto ca certificates <trust_point>' and re-authenticate and re-enroll the trustpoint for generating new certificates using 'crypto ca authenticate <trustpoint_name>' and 'crypto ca enroll <trustpoint_name>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable LDP session protection?
### Response:
To enable LDP session protection, use the 'session protection' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#session protection
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-6-UPDATE_STARTED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Entitlement update from consumption model has started.), (Recommended Action: 'INFO')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-7-CAN_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicates CAN bus information related to on-line/off-line CBC processor transitions.), (Recommended Action: No action required; the message is informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HYPHY_FRAMER-4-HYPHY_EXCEPTION
### Response:
(Severity: 4), (Category: OS), (Description: whenever any API is fail due to NULL,any API return NULL or any API fail due to creation of memory using malloc and calloc corresponding traceback is printed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. required_info: This error message, along with full console logs. Details of the operation that was occurring when this error was seen. Output of: - 'show tech-support otn')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-PID_JOBID_CONVERT_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: Failed to get JOBID from PID.), (Recommended Action: Collect show tech watchdog and show tech sysmgr contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_LNK_FAULT_ERROR_6
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the XFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do XFP OIR. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_BACKEND
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the Backend service related to use of either SysDB or SubDB. The error message describes what operation has failed and why it failed. The most likely reason for this is low memory resources or a programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_1_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath med always' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath med always' command is used to always compare the Multi-Exit Discriminator (MED) values for paths from external BGP (eBGP) peers. By default, MED comparison is done only if the paths are from the same autonomous system (AS). This command allows MED comparison for paths from different AS, enabling the selection of the best path based on MED even if the paths are from different AS.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-TCAM_INIT
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to initialize TCAM regions.), (Recommended Action: Check the status of TCAM Manger because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Debug library initialization failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-3-DRIVER_ERROR_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This might be a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-PORT_CREATE_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The SockIO SPP plug-in failed to create a port in its local database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-SDR_TRIGGER_SYSTEM_RELOAD
### Response:
(Severity: 6), (Category: INSTALL), (Description: Specified install operation needs explicit System reload for [de]activation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-2-ACE_SYSLOG_CRIT
### Response:
(Severity: 2), (Category: SECURITY), (Description: ACE SPA SYSLOG message), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_4_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_INTERNAL_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected internal error which causes the switch to not forward the packets reliably. In order to recover, the ESD process resets the switch, then exits so that it is restarted by the process manager.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-6-ENET_LINK_DOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Link physical link is down, no need to recover, just wait for physical link comeback (LC only)), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-CLIENT_NOT_FOUND
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying find the internal client structure for a given operation.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPGAMGR-7-INIT_COMPLETE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The FPGA Manager, init completed. %s-Message Description.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAAD-6-STATE
### Response:
(Severity: 6), (Category: MGBL), (Description: An change state occurred in the aaad.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_SERVER-1-UPGRADE_ALERT
### Response:
(Severity: 1), (Category: INFRA), (Description: Update FPD upgrade alert), (Recommended Action: Customer immediately knows the upgrade status.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA-4-WARN_RANGE_RETRIEVAL
### Response:
(Severity: 4), (Category: L2), (Description: A repeated failure occurred when requesting the range of available MAC addresses. A zero size range will be used, resulting in any MAC address requests from client features being rejected.), (Recommended Action: *DDTS*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-4-RPM_SIG_CHECK_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The IOS-XR appmgr has failed to verify the signature of the specified RPM, but will proceed with the installation anyway.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-MPA_PHY_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MPA PHY initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the screen and gather the output of the CLI 'show tech-support ethernet interfaces'. If the issue persists, contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-0-RSP_OCXO_FAILURE_ALARM_FATAL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Clock derived from OCXO is not proper. There could be instability in system due to bad clock received. Reloading the board to switch over to RSP in hot-standby.), (Recommended Action: Contact Cisco-TAC for further investigation/recovery action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_OC_CRC_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS from FIA CRC error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-ADJACENCY_DEL_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'CTRLIO Adjacency delete failed.' 'deleting shared memory entries failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-FRA_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed to initialize FRA library with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BOOTVAR-7-CANT_WRITE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the NVRAM file system is in error, or the boot-variable infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be written to, so processing of the operation will halt. The boot variables may not be available to the system.), (Recommended Action: Check NVRAM filesystem for corruption using the 'fsck' disk check CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-RX_CH_LOS_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Rx POD detects a loss of signal on a channel. This can be due to: [1] The link is configured by software to be receiving cells with an invalid transmit end [2] The link is not physically connect to the Tx side. For [1], it is a software bug where a Rx link should only be configured if it has a valid transmit end. For [2], if the Rx channel suddenly sees this without any physical change of the optical cable or shut down of the other end, then it is likely the POD channel has become defective. If the optical cable connecting the POD is cut, then the Rx POD will see loss of signal.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-TIMER_CREATE_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to create timer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Secure Shell (SSH) in Cisco IOS XR?
### Response:
SSH in Cisco IOS XR provides a secure method for remote management and configuration of devices by encrypting the session to prevent eavesdropping, tampering, or message forgery.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-NODE_BOOT_OPTIONS
### Response:
(Severity: 6), (Category: INSTALL), (Description: This message indicates the boot options of the specified node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-FAN_TRAY_PRESENT_CHK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The fan tray present check has failed due to specified reason, will be returning 'NOT PRESENT' from the funtion.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_15_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-3-HW_RES_OVERFLOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP entry exceeded the maximum number of resources available.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ASIC_HALTED_VIA_FPGA
### Response:
(Severity: 6), (Category: FABRIC), (Description: The specified device is halted using the FPGA register.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-MAP_SHM_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath was unable to map shared memory. This is usually caused when the system is low on resources. This error could occur for two reasons. 1. The system is low on resources. 2. Error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_LNK_FAULT_ERROR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the XFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do XFP OIR. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the pkgfs process in IOS XR installation?
### Response:
The pkgfs process in IOS XR provides file location information to processes that need to know where files are physically located. It abstracts the locations and versions of the files and provides a virtual location known as a loadpath to the node so that the software can be run.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-CONDVAR_OP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Current operation on the condition variable has failed.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLUSTER_LAYOUT-4-MINIMUM_RACK_REQUIREMENT_NOT_MET
### Response:
(Severity: 4), (Category: INFRA), (Description: Cluster layout file doesn't have minimum number of racks required for the corresponding cluster size.), (Recommended Action: Update the Cluster layout file to satisfy minimum rack requirement. Cluster reload will be needed for the new layout file to take effect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP9
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_IMC_CONTROL_SERVER_BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-4-ERR_THREAD
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured during thread handling.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-SPA_DISABLE
### Response:
(Severity: 3), (Category: L2), (Description: This is an error message indicating a Hardware access error for a SPA and disable the SPA to avoid LC reload), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-SYSMGR_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some error occured while interacting with sysmgr. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_0_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-6-ENFORCE_DISABLED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing is disabled.), (Recommended Action: The customer should enable smart licensing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_ATOM-7-INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the ATOM module in the platform L2FIB ATOM component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LMRIB_API-3-GEN_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred in lmrib client lib. This could be a memory error, thread lock fail or a problem that the LMRIB client is unable to register with LMRIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-AUTH_RENEW_FAILED
### Response:
(Severity: 3), (Category: LICENSE), (Description: The Authorization renew request failed. This may have caused due to wrong Smart Call Home settings or network connectivity failure to cisco.com.), (Recommended Action: Please check the smart agent syslog file for more information. Please turn on the smart agent debug mode and retry again for additional information. Also, please check the Smart Call Home settings and network connectivity to cisco.com.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-GENERIC_FAILURE_MSG
### Response:
(Severity: 7), (Category: OS), (Description: This is a generic error msg.), (Recommended Action: This is a Debug message . No action required. If the problem persists , contact Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWCMD-3-VALIDATE_MSG
### Response:
(Severity: 3), (Category: SNMP), (Description: 'The failure pertains to show commands in snmp to validating the data ' 'This does not indicate feature failures or issues'), (Recommended Action: 'This log does not indicate a system impact.' 'all show snmp CLI's for debugging purpose only' 'Recommend customer to re-try the command.' 'If there is no output, reconfigure the snmp settings and re-try')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-DIE_OVERTEMP_CRITICAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC on die temperature sensor is risen above or fallen below critical threshold.LC or Port will be shutdown in 24 Hrs), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, LC or port will shutdown. Call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_MA_PWHE-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An error has happended while initializing L2VPN MA PWHE process. pwhe_ma will be restarted automatically.), (Recommended Action: The process should recover automatically and no further user action is required. If problem persists, please collect 'show tech-support l2vpn' and contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-BUFFER_OVERFLOW
### Response:
(Severity: 3), (Category: MGBL), (Description: 'buffer overflow'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-7-DATA_PATH
### Response:
(Severity: 7), (Category: MGBL), (Description: An unexpected error occurred when the VTY Device DLL asked the TTY Server to perform a Data Path operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM_OFFLOAD-4-STATS_DROP
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An error was encountered while attempting to deliver statistics to the Connectivity Fault Management (CFM) protocol. This is a transient problem from which the system should recover, but CFM statistics may be incorrect until it does. This may indicate the system is under unusuallay high traffic load.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-PROCESS_CORE_FOR_DEBUGGING
### Response:
(Severity: 6), (Category: INFRA), (Description: The command took longer than expected and so was timed out. In order to triage the delay, a core was created for future debugging. Details of this core can be found in the recent COREHELPER syslogs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The original install operation will have failed due to the command timing out (not by the core itself). Re-running the install operation should work.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-4-NO_MEMORY
### Response:
(Severity: 4), (Category: OS), (Description: Not enough memory available in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_LPTS-3-UNKNOWN_FGID_DB_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: A software error occurred, when the PA(Port Arbitrator) attempted to Allocate, free or join FGID from the FGID Aggregator.), (Recommended Action: The process lpts_pa will attempt to recover by retrying the operation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_API-7-ERR_ECM
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver client library encountered the annunciated error condition. There are 3 types of this failure. - ECM create failure: In this case the FIA driver client library will not be able to connect to the FIA driver. - Register notification handler failure: In this case the FIA driver client library will not receive notification of ECM events. - Failure to open a connection:), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-ERR_SOCKET
### Response:
(Severity: 3), (Category: IP), (Description: Socket operation failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-4-LTRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: ltrace initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_16P_OC48-3-PORT_UNMAP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to delete or unmap SONET port.), (Recommended Action: Check the process plim_16p_oc48 . plim_16p_oc48 process is driver of LC.If this process is crashed then packet may be dropped in LC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WANPHY-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified WANPHY Alarm has been declared or released. interface: interface on which alarm is set/cleared alarm: alarm being asserted e.g: SF-BER or SD-BER status: set/cleared), (Recommended Action: If SF/SD-BER alarm is seen: Link quality degraded beyond configured threshold. Check if the peer end is injecting error packets else check if the cable is faulty. Collect sh controller wanphy <> all and verify if B2 errors are incrementing. If B2 count is incrementing the alarm is seen because of peer end is injecting error packets or faulty link)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-6-STAT_CREATE_ERROR
### Response:
(Severity: 6), (Category: MGBL), (Description: The S2681 UART driver was unable to create a file to store statistics. Show statistics command would fail. We can still see the statistics content from core file.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICLIB-4-TRACE_INIT_FAILED
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license client library could not initialize internal tracing used for technical support.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-3-EXCEED_MAXFREQ
### Response:
(Severity: 3), (Category: IP), (Description: Frequency Error exceeded NTP tolerable limit (500 PPM).), (Recommended Action: Try to reset the drift value by <CmdBold>ntp reset drift<NoCmdBold>. If this message recurs after resetting the drift value, see <CmdBold>show ntp associations<NoCmdBold>, correct information for all the peers, contact your Cisco Technical support, and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UTIL_ASSERT-6-DUMPING_CORE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: An unexpected event occured in the process specified, and so a running core dump has been taken. This is not expected to have any functional impact, but should any problems be seen then this core will aid debugging.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-CALLING_PLATFORM_RELOAD_NODES_SPECIFIC
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install manager needs to call the platform API to reload the ndoes listed, in order to complete the parallel install operation. If the call fails, the user may have to manually reload each node manually, by calling reload location <loc> from admin mode), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power greater than or equal to the high Tx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-5-ACTIVATION_COMPLETE
### Response:
(Severity: 5), (Category: SUBSCRIBER), (Description: The activation of subscriber sessions on the SLAVE has been completed. This is either in response to CLI command or a dynamic failure trigger on a SLAVE which has been configured as a warm-standby.), (Recommended Action: None required if there has been any network event or administrative action that caused this activation of sessions. Subscriber status may be checked on the slave router to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
deflate-3-output_non_directory
### Response:
(Severity: 3), (Category: OS), (Description: The uncompression output is not a directory. The output for multiple files uncompression needs to be a directory.), (Recommended Action: Please check the command syntax for the output to be a directory if it is from a user entered CLI. Please capture show log and error messages if the error is not due to user entered CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_EDM-3-NO_STATS
### Response:
(Severity: 3), (Category: L2), (Description: The statistics manager returned null data for Virtual-Circuit (vc), a Non-Zero, not-Null value is expected. Operation Failed for the reported Data-Link Connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-REMOTE_CORE_ISOLATION_CLEAR
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has recovered from remote core isolation and has attempted to recover the ports in the redundancy group.), (Recommended Action: This message may not require any action. However the <CmdBold>show l2vpn iccp-sm group group-num<NoCmdBold> command may be used to verify the state of the ICCP-SM core interfaces. Reference the L2VPN ICCP-SM section of the IOS XR documentation for details on core isolation failures and related configuration commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ERR_MRIB_SEND_RESPONSE_RETRY
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-COLD_BOOT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: In recovery from a system restart, a powercycle has been successfully initiated on this slot.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_ECSR_0
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an eCSR0 access error.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-5-FSM_DISCARD
### Response:
(Severity: 5), (Category: IP), (Description: A valid formatted ANCP packet was received for an adjacency, but is unexpected given the state the adjacency is currently in.), (Recommended Action: The ANCP protocol is written to handle such events by discarding the packet. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-XAUI_IF_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Punt xaui interface has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you configure PTP in Cisco IOS XR?
### Response:
To configure PTP in Cisco IOS XR, use the 'ptp' command followed by the PTP profile (such as G.8265.1 or G.8275.1) and the clock type (ordinary, boundary, or transparent). You can also configure PTP parameters such as the domain number, priority1 and priority2 values, and announce interval using the 'ptp' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-IM_NAME_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_GROUP_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: A call to a group services interface failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-UNABLE_TO_RECONNECT
### Response:
(Severity: 3), (Category: SERVICES), (Description: If the Service Infrastructure becomes out of sync with IM, then it reconnects in order to prompt a resync. If this message is displayed then it has been able to reconnect. This may cause configured interfaces to no longer forward traffic, or interfaces which have been shut down or deleted to continue to do so.), (Recommended Action: Restarting the process that displayed the message may solve the issue, or restarting ifmgr. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP-3-EMWEB_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The EmWeb code has encountered an error condition or state. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: Restart http server if the errors persist.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBC-3-VERSION_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CBC on the slot has an incorrect firmware type programmed. The firmware major version does not match the card type.), (Recommended Action: Try cbc fpd force upgrade on this node and then reload this node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SIGFPE_INFO
### Response:
(Severity: 4), (Category: OS), (Description: Signal info), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-SECURE_MODE_DISABLE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to disable ZTP on secure mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-ACL_GET
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to get the named prefix-list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-MISSSTARTOBJECT
### Response:
(Severity: 4), (Category: MGBL), (Description: The command entered requires naming information of start and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSCMIB-3-CSC_SNMP
### Response:
(Severity: 3), (Category: SNMP), (Description: The SNMP management station tried a set request without specifying a request index. Check the request and try again.), (Recommended Action: Check the request and retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-CPU_RGMII_RX_LINK_FAIL_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 125Mhz clock has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-PRESHARED_KEY_MISMATCH
### Response:
(Severity: 6), (Category: SECURITY), (Description: Failed to bringup IKEv2 session due to mismatched keys on both peers.), (Recommended Action: for PSK method, configure same preshared keys on both ends.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-HIGH_THRESHOLD_LARGER_THAN_WINDOW
### Response:
(Severity: 3), (Category: L2), (Description: For high threshold events to be possible, it is required that the number of possible errors in the configured window is at least as large as the high threshold, which is not currently the case. Note that when window size or threshold is specified in frames or symbols, its length in milliseconds depends on the maximum bandwidth.), (Recommended Action: Consider changing the relevant configuration (i.e. the window and/or high threshold size).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPHC_MA-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: L3), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Check how much memory is available at the location where the error was reported. If the system has enough memory and if the error message persists, contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Qnet protocol in IOS XR?
### Response:
Qnet is a protocol that enables transparent inter-node communication for IPC mechanisms like LWM. It allows processes to communicate over the control network without being aware of node boundaries. Qnet provides location transparency using a virtual bus abstraction and hides the details of marshaling messages between nodes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-MSTATS_ALLOC
### Response:
(Severity: 5), (Category: OS), (Description: It failed to allocate HW counters. It may be because of running out of HW counters or encountering internal error.), (Recommended Action: Disable the numbers of non crucial services which use HW counters.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-4-REPL_MODE_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while trying to modify replication mode on linecard), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM_PLIB-3-EVENT_SET_RETRY_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: A call to set the retry timeout for producers to bind with iparm failed. This will call default timeout values to be used.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-RPL_INIT
### Response:
(Severity: 7), (Category: SYSDB), (Description: An unexpected error occurred during initialisation of the replicator module.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-4-SPAWN_FAILURE
### Response:
(Severity: 4), (Category: MGBL), (Description: An executable was not spawned due to the mentioned error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-MMAP
### Response:
(Severity: 3), (Category: MGBL), (Description: 'mmap of file'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_EGR_Q_ERR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-3-SERVICE_ENTRY_NOT_AVAILABLE
### Response:
(Severity: 3), (Category: OS), (Description: New service can't be registered due to memory exhaustion. Need to fix source code to accept more services.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_THREAD_COND
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an unexpected error performing a condition operation. The process may restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PMLIB-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: svc pmlib encountered an provisioning warning.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-1-ZERO_CAPACITY
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Capacity in the IDPROM is zero.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_PW-6-STANDBY_READY
### Response:
(Severity: 6), (Category: L2), (Description: L2VPN Pseudowire state is changed to standby-ready.), (Recommended Action: If the state change was unexpected, verify the configuration settings for the cross-connect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR_ASIC-4-JER2_INTERRUPTS_DISABLED
### Response:
(Severity: 4), (Category: FABRIC), (Description: J2 A0 asics detected, only frr testing intr enabled), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-7-PFI_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to register with PFI infra in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_AAA_SESSION
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error using AAA session APIs. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-ACCESS_VFI_PW_MATCHES_EVI_NEIGHBOR
### Response:
(Severity: 3), (Category: L2), (Description: Interop/seamless integration is not supported for Access VFI Pseudowires. Therefore, configuring an Access VFI PW with a neighbor matching an EVPN EVI neighbor under the same bridge domain is an unsupported config that can lead to unexpected behavior.), (Recommended Action: Unconfigure either the indicated EVI bridge port or the Access VFI PW from the affected bridge domain to clear the misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-3-EVENT_CONN_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-SYSADMIN_VM_ERROR_EVENT
### Response:
(Severity: 3), (Category: DRIVER), (Description: SysAdmin VM has reported a error event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-LNS_LOP_DROP
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq dropped a few cells because of unavailability of enough planes to forward the cells to its destination. If the cells are dropped intermittently during system reconfiguration (LC reload, RP fail over, etc), then these drops are expected. System will recover after the hardware reprogramming completes. If these drops are seen continuously for long periods, then this indicates that either the node is not programmed correctly, or there is an error in data plane software.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-5-OIR_ACTION
### Response:
(Severity: 5), (Category: TOPOLOGY), (Description: System Admin Manager got notification that a card has been inserted or removed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-INVALID_SLOT
### Response:
(Severity: 3), (Category: L2), (Description: The slot number is invalid), (Recommended Action: The slot number should be less than 15)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-THREAD_CREATE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to create the mentioned thread. This error could occur for two reasons. 1. The system is low on resources. 2. Error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-SIGNAL_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified PRM worker thread encountered the signalling error.), (Recommended Action: Please collect output of the following commands: show platform show log show process blocked location <> show controller rm prm client trace <process name> all location <> show controller rm prm process <process name> location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the OSPF router dead interval and how is it related to the hello interval?
### Response:
The OSPF router dead interval determines how long to wait before declaring a neighbor down if no hellos are received. By default it is 4 times the hello interval, which is 40 seconds for broadcast/p2p and 120 seconds for NBMA/p2mp networks.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-PLANE_MISMATCH
### Response:
(Severity: 3), (Category: SECURITY), (Description: The username has to be unique across the Admin and LR plane.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-3-IM_PD_INIT_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: Interface Module PD initialization failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_UTIL-3-FAIL_DEBUG_REG
### Response:
(Severity: 3), (Category: MEDIA), (Description: NVRAM debugging service register to sysdb failed.), (Recommended Action: Check the existence of the Sysdb service. The system is supposed to re-register if the Sysdb service is available.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-EARLY_ACTION_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: An unexpected error was encountered at the start of an action command. The action has not taken place and system state was not updated. The install infrastructure has restarted to recover. Please try the install command again.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-2-THREAD_LOCK_FAILURE
### Response:
(Severity: 2), (Category: OS), (Description: An effort to lock database failed. The function which tried to lock as well as the function holding the lock are given in the message.a The database might not reflect the expected behavior.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-AUTOROUTE_DESTINATION_DEPRECATED_CONFIG
### Response:
(Severity: 4), (Category: ROUTING), (Description: This configuration was replaced with an alternate \ and will be removed in a subsequent release.), (Recommended Action: Please do not use this form of autoroute destination configuration anymore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SATORI-3-GET_BOARD_TYPE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Satori get board type has failed and it might not boot up), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-EVENT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred during the event loop.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes msdp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes msdp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Using the Job ID from the above command, please run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace events<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace events<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-NO_INFO_FOR_COPY
### Response:
(Severity: 3), (Category: OS), (Description: DLRSC infomation is not available, can't copy core file.), (Recommended Action: Check dumper process, collect console message. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-INVALID_PORT
### Response:
(Severity: 3), (Category: DIAG), (Description: A diagnostic request is being made on a port that does not exist.), (Recommended Action: Ensure the specified port number exists and that the correct port number is being specified.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-ISOLATION_CLR
### Response:
(Severity: 5), (Category: L2), (Description: At least one configured core interface for the EVPN group is up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-NO_OUTSTANDING_BMA_REQ
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT received a BMA interrupt indicating a response to a BMA buffer request but there was no request made), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-2-PROC_FAIL
### Response:
(Severity: 2), (Category: L2), (Description: During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_MISSEVENT
### Response:
(Severity: 4), (Category: SYSDB), (Description: The command entered requires a notification event type and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CATAPULT-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CATAPULT Driver encountered a fatal error and is not able to recover. The supplied text string will explain the reason. Call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-7-JID_GET_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: process's JobID can not be obtained), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_UV-3-MISCONFIG
### Response:
(Severity: 3), (Category: L2), (Description: The FR Uberverifier process has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier process cannot correct this.), (Recommended Action: The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_BDI_DEMB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINK-4-BERTSTART
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: BERT could not be started), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-4-DSCP_VALUE_NOTSET
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The SRG Packets Priority will not be set.), (Recommended Action: Refer the SRG Configuration document.Recommend to use NTP configuration documents.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-SYSDB_BIND_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_5_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-4-MESSAGE_NOT_PROCESSED
### Response:
(Severity: 4), (Category: INSTALL), (Description: A part of the install infrastructure has been waiting for the stated time for the install director to be able to process the image. This can happen if other processes are taking a long time to initialize.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_BAD_PORT
### Response:
(Severity: 3), (Category: IP), (Description: The telnetd server was passed a bad port number.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-ERRDIS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Front panel SFP port is UDLD Uni-Directional, check sfp/fiber for errors), (Recommended Action: 'Check if the media (fiber / sfp) has any errors')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_9_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-SYS_NOT_READY_CLI
### Response:
(Severity: 6), (Category: MGMT), (Description: This is expected when connection to configuration database is down, if this message even though configuration database is up, please), (Recommended Action: The program tries to re-connect the directory service, once directory service is up, this message will not come up, If configuration databse is up and still this message comes, the work-around would be restart program)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_rio_netio-3-TERM_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: The service ingress diversion NetIO DLL termination function failed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option verbatim feature?
### Response:
The MPLS TE path-option verbatim feature disables the default behavior of automatically assigning IP addresses to unnumbered interfaces in an explicit path. With verbatim, the explicit path is used exactly as configured without modification. This is useful when the automatic IP address assignment conflicts with intended explicit paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An unexpected condition was detected in the Platform SPAN module.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-6-INFO_I_AM_DSC
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational message notifying current DSC in system), (Recommended Action: This is an informational message. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-5-UNIDIRECTIONAL_LINK
### Response:
(Severity: 5), (Category: L2), (Description: The UDLD protocol has detected a problem with this link: It is unidirectional. The link will be disabled.), (Recommended Action: Correct the link fault, then re-enable UDLD using the following command: - ethernet udld reset interface <port name>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabricq Event Manager event block error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACTION_IN_ACL_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The following actions in an ACL are not supported in the direction specified: log-input (ingress/egress) log (egress)), (Recommended Action: remove the action(s) from ACL and re-apply)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-LM75B_INIT_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to LM75B init failure . This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IPSEC_DEBUG_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to initialize the ipsec debug commands.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_MGR-3-INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The SVI Adjacency Manager's initialization has failed. The process will exit and automatically restart.), (Recommended Action: The message may be displayed due to low memory condition in the system. Check the output of show mem summary and take necessary action. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_EA_OOR-4-NP_FLOWS_OOR_GREEN
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-3-PCI_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The DMAC device encountered PCI errors.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CHKPT_FAILED_GO_ACTIVE
### Response:
(Severity: 3), (Category: L2), (Description: After an RP switchover and/or HA role change, CFM failed to notify Checkpoint that the current CGM process is the active version. This means that the CFM Global Manager process does not have write access to the checkpointed data. Hence, MIB index values for Domains and Services configured after this point will not persist across process restarts.), (Recommended Action: CFM should continue to operate normally. However, newly-configured Domains and Services will not have their MIB indices stored in the checkpoint database. Restarting the CFM Global Manager process may resolve the problem. The CFM Global Manager can be restarted by issuing 'process restart cgm' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-MULTIPLE_ISOS_IN_INPUT_LIST
### Response:
(Severity: 3), (Category: INFRA), (Description: Multiple ISO's have been provided in input list. Invalid input.), (Recommended Action: Skim through the input list again and include relevant and appropriate ISO.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_PM_TEST-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: sip_pm test encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: This is a test software for internal use. So, there is no actiom required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV4_EA-5-DEBUG
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This is an information message in the ASR9K platform specific code software. The message is for debug purposes only and not an error.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-5-LTRACE_INIT2
### Response:
(Severity: 5), (Category: HA), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: Tracing will not work properly. Process will proceed running. Can restart the process to overcome this issue. IF error persists.Collect the error log with return value and core dump of the process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-CFS_NATIVITY_CLEANUP
### Response:
(Severity: 3), (Category: MGBL), (Description: Local CFS is non-native and automatic cleanup of it has failed.), (Recommended Action: Run 'commit replace'. If contacting support, please provide trace information from executing command 'show cfgmgr trace location <node ID>' for the node with this problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-6-SUSPICIOUS_PD_DELETE_REQUEST
### Response:
(Severity: 6), (Category: IP), (Description: Received a DHCPv6 Release/Decline message from a suspicous client and ignored the message to be safe. It could be a spoofing attack.), (Recommended Action: Find who sent this message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-3-EVENT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Some error encountered like initialization failure or connection failure), (Recommended Action: Please collect the 'show logging' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-7-SYSDB_INIT
### Response:
(Severity: 7), (Category: IP), (Description: An software error occured when the RAW process try to do initialization related with sysdb process.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-CARD_SHUTDOWN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The hw-module in the given location is being shut down for the given reason), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-6-EVENT_MGR_UNKNOWN_EVENT_RCVD
### Response:
(Severity: 6), (Category: IP), (Description: The event manager has received an unknown event.This is not system impacting,the system will continue to funtion normally.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-SHM_FREE_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The platform-dependent FIB failed to free shared memory due to a version mismatch. This could eventually lead to memory exhaustion.), (Recommended Action: Try restarting the process using the command- process restart l2fib_mgr Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-6-GSP_SEND
### Response:
(Severity: 6), (Category: OS), (Description: A call to group_send() failed. There could be a problem connecting to underlying gsp server or transport between RP and LCs. If this is seen for a long time, there might be a real issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_WAVL_DELETE_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: A call into the IOS-XR WAVL tree library failed. This may result in the firewall controller unexpectedly restarting after this message is seen.), (Recommended Action: If the process unexpectedly restarts, this will clear the problem; otherwise no further action is necessary to recover. In either case, please copy the message exactly as it appears on the console or in the system log, along with any subsequent messages relating to process restart and the information detailed below, and call your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install boot-options command in IOS XR?
### Response:
The 'install boot-options' command is used to modify the boot options for the next router reload. It allows specifying the image to boot from and other boot-related parameters.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_UNREGISTER
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_unregister failed while unregistering the chkpt table.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_STORM-3-SC_EXIST_ERR_IFH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to program storm control as it is conflicting with an existing AC), (Recommended Action: Remove storm control config on this sub-interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IM_MTU_REGISTER
### Response:
(Severity: 3), (Category: L2), (Description: CDP failed to register with the interface manager for MTU size changes on this particular interface. This may cause problems sending CDP packets.), (Recommended Action: Perform 'cdp disable', 'cdp enable' on the interface to try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_15_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_SEC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from SEC.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-7-ERR_LTRACE_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID BCDL Consumer could not open the annunciated ltrace buffer. The FGID component and the system should function as normal, with the exception that ltrace will not be available for FGID BCDL Consumer process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-3-CMD_EXEC_ERROR
### Response:
(Severity: 3), (Category: LIB), (Description: Failure returned by command), (Recommended Action: Collect 'show tech-support ctrace' and show tech HBLoss output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-BARBARIAN_VOLT_FIX_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: VP4 rail on the SPA could not be margined to nominal voltage due to some failure.), (Recommended Action: SAR chip SRAM parity errors might result. Margin the rail manually.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-BAD_FPD_IMAGE
### Response:
(Severity: 3), (Category: DRIVER), (Description: The indicated FPD image in IOFPGA bootflash does not appear to have a valid meta-data. This means that a previous FPD upgrade operation did not finish the programming operation of the image.), (Recommended Action: Run again the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-6-INSTANCE_ASN_VIRTUAL_NAME
### Response:
(Severity: 6), (Category: ROUTING), (Description: The name chosen for the process matches or is a subset of an EIGRP show or clear command. This can cause ambiguities with subsequent show or clear commands for this process. Hexadecimal and octal numbers are not allowed. If Decimal, it should be in range of 1 to 65535.), (Recommended Action: Choose a different name for the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-KEYAUTOGEN_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: CEPKI keypair autogen error message with two prameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_LA_QOS-2-VOQ_FLUSH_FAILED
### Response:
(Severity: 2), (Category: QOS), (Description: VOQ Flush failed when applying the drop profile on ingress device.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-PORT_DOWN_WITH_LOCAL_FAULT
### Response:
(Severity: 3), (Category: INFRA), (Description: Port is down due to Local Fault.), (Recommended Action: Check for port status, connectivity and note the trigger To recover reset the switch.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. ltrace init failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-MAC_1_TX_FIFO_OFLOW_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: MAC on NPU-1 had transmit fifo overflow on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_PCE-5-PEER_STATE_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: An PCE peer has changed state. This message appears only if the <Bold>mpls traffic-eng pce logging events peer-status<NoBold> command is configured for the PCE.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KEYCHAIN-3-SYSTEM_MANAGER_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The 'System Manager' is a central entity which monitors all the processes in any node. It failed to retrieve the requested job id, due to an unexpected error.), (Recommended Action: If the message recurs, issue the commands 'show key chain trace client <clientname> both' and 'show tech-support sysmgr' to gather required data and contact the Cisco technical support representative with the gathered information and the exact error message as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-NULL_HANDLE_MSG
### Response:
(Severity: 3), (Category: MGBL), (Description: one of the internal data structure is not valid.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-7-INIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_CRP-3-EVENT_MGR_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A problem occurred when a call to event_manager_create() was made during the initialization of the candidate-rp.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging | inc err<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging | inc err<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_candidate_rp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_candidate_rp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_candidate_rp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_candidate_rp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. From the above command, use the Job ID and try the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_HW-3-PARAM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An incorrect parameter has been passed. This may be due to a software defect, or a wrong parameter passed through command line interface. Please collect the traces.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between the Point-to-Point Three-Way Adjacency TLV and the Three-Way Adjacency TLV in IS-IS?
### Response:
The Point-to-Point Three-Way Adjacency TLV is used on point-to-point links to implement three-way handshake for adjacency establishment. It includes the neighbor's system ID and extended circuit ID. The Three-Way Adjacency TLV is used on broadcast links for the same purpose but includes the neighbor's LAN ID instead of the extended circuit ID.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_WRITE_FILE
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system could not insert digest for the file specified in error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-RX_SECURE_CHANNEL_ESTABLISHED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-LP_CONN_RECOVERED
### Response:
(Severity: 5), (Category: IP), (Description: The ntp server recovered a connection with one of the configured clock source. The Stratum tells the change of server stratum.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GE_DMAC-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in GE-DMAC process. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers ge-dmac device <interface> detail location <loc in msg><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers ge-dmac device <interface> detail location <loc in msg><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-INSTALL_OPERATIONS_IN_PROGRESS
### Response:
(Severity: 6), (Category: INFRA), (Description: Install tasks are in progress, ztp should not abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-7-UNKNOWNCARD
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPGAMGR-2-BOARD_RESTART
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The FPGA Manager api for resetting the board via a control register has been called by the process with the specified PID.), (Recommended Action: Collect event logs and any other data specified by the crashing program)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-DB_DISK_FREE
### Response:
(Severity: 6), (Category: MGBL), (Description: Older commits are deleted to free up some space and unblock any new commits), (Recommended Action: Delete any unnecessary files from the config disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-3-NOT_YET_IMPLEMENTED
### Response:
(Severity: 3), (Category: L2), (Description: dwdm, a function was not implemented.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-WRITE_OWNERSHIP
### Response:
(Severity: 7), (Category: LIBRARY), (Description: The replicator has failed to acquire ownership of a system data handle.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink-3-MTU_IMPOSE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The specified MTU could not be applied on this interface.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-3-SYSMGR_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error encountered in initializing system manager.), (Recommended Action: Please collect the 'show logging' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-1-ERR_HW_RELOAD_NODE
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error is detected on the Datapath FPGA. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause linecard reload. Device: %s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error.), (Recommended Action: If the message recurs, diagnostics should be executed on the PLIM and MSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-CONFIGURATION_VALIDATION_WARNING
### Response:
(Severity: 4), (Category: MGBL), (Description: While scanning running configuration, the Central Configuration Validator (CCV) detected some configuration that violated one or more configuration consistency guidelines. The affected configuration can be inspected using <CmdBold>show configuration failed persistent<noCmdBold>), (Recommended Action: Run the command <CmdBold>show configuration failed persistent<noCmdBold> to display the affected configuration items, together with the resulting warnings. Attempt to resolve the warnings by adjusting configuration as suggested. If you are unable to resolve the warnings or believe the warnings are invalid, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CAIBIST-3-ERR_SW_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Process encountered an error during initialization due to invalid argument, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-HB_SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal software error has occurred for the specified SIM Service Engine heartbeat machanism.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-MATRIX_CLUSTER_PARITY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-QUERY_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Unexpected c-shim query failure for given interface handle), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-PEX_INT_PORT0_GOOD_BIT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a pex switch error), (Recommended Action: Please try to correct problem by reloading board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-SESSION_SETUP_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: The RS232 DLL has been unable to setup a session on a TTY), (Recommended Action: Try performing a 'clear line' on the relevent TTY. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-DB_COMMIT
### Response:
(Severity: 6), (Category: MGBL), (Description: An SDR plane configuration change was made by the specified user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-CHAN_CONNECT_FAILED
### Response:
(Severity: 4), (Category: MEDIA), (Description: The media server channel specified could not be opened for the specified reason.), (Recommended Action: Report this message to TAC if the messages contine to show up Capture console log, 'show media', show media trace' if message continues)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-OIR_TIMEOUT
### Response:
(Severity: 3), (Category: MGBL), (Description: This is an error message to indicate that the configuration could not be either saved or restored because of a pending commit operation or commit database consolidation operation. A manual reset of the node after the pending operation has completed should save or restore the configuration for the node.), (Recommended Action: Use the command 'show configuration sessions detail' to verify if the pending operations are still occurring. After the pending commit operation or commit database consolidation operation has completed, use the admin mode command 'hw-module location <node> reload' to reset the node and restore its configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMIO-3-OPERATION_NOTIFY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For notification purpose only.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-BAD_MAGIC
### Response:
(Severity: 7), (Category: LIBRARY), (Description: The replicator library discovered a bad magic number in a persistent data structure. This suggests that the data has been corrupted. The replicator library will attempt to recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ADD_SYS_IP_ADDR_ATTR_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-XIF_GTFF2_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected XIF GTFF2 memory multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-4-HOST_FROZEN
### Response:
(Severity: 4), (Category: L2), (Description: The specified mac or ip address has been detected on more than one host and has been frozen after maxing out the configured number of times it can be detected as duplicate. Please refer to the recommended action to unfreeze the mac.), (Recommended Action: Ensure the mac or ip address is only assigned to one host.The mac-address can be unfrozen using the following cli: clear l2route evpn frozen-mac frozen-flag <topology> <topology-id>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVEDGE_DATA-6-IRL_MAXSLOT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Recommendation for better IRL resiliency), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-ENS
### Response:
(Severity: 3), (Category: MGBL), (Description: One or more ENS or NRS APIs has returned a failure. This failure happens on the producer side.Internal failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-SYSTEM_LIB_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: A system library call failed unexpectedly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_5_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-6-INFO_SUCCESS
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd successful login information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the function of the SNMP in Cisco IOS XR?
### Response:
Simple Network Management Protocol (SNMP) in Cisco IOS XR is used for network management and monitoring by querying devices for various statistics and operational data.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-SESSION
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected error occurred when the VTY Device DLL asked the TTY Server to perform a session operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR* *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-KNOWN_HOG
### Response:
(Severity: 6), (Category: HA), (Description: This message is emitted if the top CPU user is known to use substantial CPU under some circumstances.), (Recommended Action: The command 'show watchdog trace' will display additional information about the potential CPU hog. If the hog is persistant, contact technical support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-SHUTDOWN
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process has performed a graceful shutdown and will be restarted.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}'). Check to make sure the process has restarted. If not, restart manually.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-2-MIGRATE_DONE
### Response:
(Severity: 2), (Category: OS), (Description: Migration completed in x seconds.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-6-INIT_LTRACE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The process will continue with it's business, however, as result of this error, mbi-hello will not be able to collect any trace debug information of its operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACLEARN-3-DLL_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to intialize mac distribution dll.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-SYSDB_BIND
### Response:
(Severity: 3), (Category: SNMP), (Description: SNMP binds to SysDB to receive notifications on the MIB's behalf. MIBs typically use these notifications as triggers to send out SNMP notifications (e.g. Traps). If SNMP cannot bind to SysDB, these SysDB notifications will not be received, and thus some SNMP notifications may never be generated.), (Recommended Action: Check 'show context' command to see if any crash happened and sysdb is in a blocked state. Collect 'show process blocked' and 'run attach_process -p <pid of crashed process>' output. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_CIDRID_SES_THRESHLD_NO_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID and Remote ID is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGMP_MTRACE-3-SOCKET_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Socket error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-LOOKUP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: The Linux Packet classifier failed to look up information relating to open Linux sockets. This may cause packets which should be handled by Linux applications to get dropped.), (Recommended Action: If the shared memory database being used has become corrupted, this may be resolved by restarting xlncd. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INCOMPATIBLE_FT_FOR_LC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This LC type is not supported with V1 type Fantray for the ASR9K family as it is not capable to cool down system to required level. There is a risk of damaging hardware by continue running with this type of Fantray Shelf manager raises this alarm when it detects the presence of the incompatible LC and clears the alarm when the LC is no longer seen as being present.), (Recommended Action: Please remove this LC from the chassis and upgrade Fantray to V2. If you have questions, please contact your Cisco technical representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIAD-7-KILL_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Probably the process being killed has already exited), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Check whether the process has already exited with command 'show process all')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-IM_UPDATE_IDB_HANDLE_MISMATCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-PACKET_TOO_LARGE
### Response:
(Severity: 3), (Category: IP), (Description: A packet larger than 4096 bytes has been received, and truncated.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_FC_DIP2_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control DIP2 parity error on NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-NO_ARB_ACT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected no active arbiter in the system.), (Recommended Action: If there are no RSPs present or if both RSPs are undergoing a reload, then this is an expected message. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: Check if there are any possible memory leaks. Memory leaks can be seen using the following commands: - show memory compare start - perform the operation like executing show command/ process restart etc. - show memory compare end. - show memory compare report gives if the process we are looking for is leaking memory. Copy the memory report and error message exactly and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-7-ERR_TTYMGMT_FD
### Response:
(Severity: 7), (Category: SECURITY), (Description: Error encountered while using TTY management library.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-OBJECT_INIT_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: The policy_repository was atempting to initialize a data object and failed.), (Recommended Action: Look for out of resource conditions. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-ODN_PREFPATH_CONFLICT
### Response:
(Severity: 4), (Category: L2), (Description: On Demand Nexthop (ODN) config was attempted for this EVPN VPWS cross-connect. However, there is a pw-class with a static SR-TE policy attached to this cross-connect. As a result, the ODN configuration is ignored.), (Recommended Action: Remove the pw-class under this EVPN VPWS cross-connect to take the ODN configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-IMPLICIT_LICENSE_USED
### Response:
(Severity: 4), (Category: LICENSE), (Description: A feature which has no license has been enabled because the system is still in the implicit license period, during which licensed features may be used without licenses. When the implicit license period ends the feature will be deactivated unless a license has been installed.), (Recommended Action: In order to use licensed features, obtain a license and install it using the 'license add' command in admin mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-ASYNC_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a message in FIB platform to indicate that engine layer identified an warning while programming an object in h/w.), (Recommended Action: Please collect the console log, show tech-support cef platform. This is not a HW programming error but a warning condition that needs to be monitored for the given table and transition and report any abnormal behavior to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure NTP?
### Response:
To configure NTP (Network Time Protocol), use the 'ntp' command in global configuration mode. RP/0/RP0/CPU0:router(config)#ntp server 192.168.1.101
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-6-SUCCESSFUL_HW_AUTHENTICATION
### Response:
(Severity: 6), (Category: DRIVER), (Description: Card manager has successfully authenticated Cisco HW genuine check), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-7-ERR_EXIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An error occurred in Interrupt controller Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CHASSIS_POWER_THRESHOLD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Real time power consumption in the chassis (power consumed by all the nodes) has exceeded the threshold of 75% of the worst case available power. Hence the alarm is raised), (Recommended Action: Verify the power draw using CLI: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env power<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env power<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Disable power to node consuming more power, using CLI. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin-config)# hw-module power disable location X/Y/Z<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin-config)# hw-module power disable location X/Y/Z<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMA-4-GEN_ERR
### Response:
(Severity: 4), (Category: L2), (Description: An internal error was detected in CEMA module operation), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_ATS_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SYSDB_BIND_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The bind operation has failed for the above reason. This is something that should not occur under normal operations.), (Recommended Action: restart policy_repository and check for re-occurence of issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-OUT_OF_MEMORY
### Response:
(Severity: 3), (Category: L2), (Description: The system is low on memory.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_9_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-MAC_LIMIT_BD_SET
### Response:
(Severity: 6), (Category: L2), (Description: Number of MAC addresses in the bridge-domain has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-ABORTTRANS
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_THREAD_MUTEX_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while creating a mutex for use by a client with the specified ID. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-2-UPGRADE_FPGA_IMAGE
### Response:
(Severity: 2), (Category: FABRIC), (Description: FPGA2 version should be minimum 0.33 to operate properly.), (Recommended Action: upgrade hw-module fpd location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-PPS_ACCESS
### Response:
(Severity: 4), (Category: L2), (Description: Software could not access the PPS device during initialization.), (Recommended Action: None. Software corrected the issue by power cycling the PPS device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV6_EA-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails due to failure during forwarding feature programming. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPv4-2-MSTATS_ALLOC_ERR
### Response:
(Severity: 2), (Category: IP), (Description: Unable to allocated needed stats counters, accounting features may not be working properly.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-CARD_OVERTEMP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Card hotspot temperature has risen at or over critical threshold.), (Recommended Action: Verify the failure, give CLI: (admin)# show env --> particularly temperature and fan output (admin)# show env trace --> to see cards STT values (exec)# show env led details Card can operate in this range but is nearing shutdown temperature threshold (STT).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-5-WARN
### Response:
(Severity: 5), (Category: MGBL), (Description: No error has occurred, but you should be aware that an unusual or unwanted situation may have arisen, and you may want to take preventation action as outlined in the warning message.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE_MAIN-3-DLL_OPEN_ERR
### Response:
(Severity: 3), (Category: L3), (Description: 'Process failed in opening dll.' 'ISSU operation will continue without any error.'), (Recommended Action: 'ISSU manager will retry opening dll after sometime.' 'If the issue persists ,' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-COALESCER_NOT_FOUND
### Response:
(Severity: 7), (Category: OS), (Description: A coalesce function name notified from a client is not found), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-2-MIPC_STUCK
### Response:
(Severity: 2), (Category: L2), (Description: Inter-processor communcation to the Metro is stuck.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-X86_XFORM_DBG
### Response:
(Severity: 7), (Category: HA), (Description: For UT), (Recommended Action: X)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSP_A_PKT_FRAME_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TSP decoder A frame error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-AIB_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process initialization failed whilst trying to connect to AIB. The argument depicts the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_PFILTER_EA-3-ERR_IM_CAPS
### Response:
(Severity: 3), (Category: ACL), (Description: 1) An ACL could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. This error can happen when a new bundle member is added and the ACL can not be programmed successfully. 2) An ACL could not be removed from hardware.), (Recommended Action: 1) When this error occurs the running-config will not be in sync with line card configuration. It is recommended that the bundle member on which the error occured be removed from the bundle. The ACL configuration may also be reduced until it can be successfully programmed on the new bundle member. 2) If the ACL could not be removed from hardware a line card reload is recommended.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDR-3-FIRMWARE_DOWNLOAD_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: CDR firmware download failed for the specified slot'), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMC_GTRIE_DEBUG-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error. GTRIE debug library initilization failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM_OFFLOAD-7-INIT_ERR
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The CFM Software Offload Plugin encountered a fatal error during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_MQ_SEQ_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 1 MQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-2-CRIT_MEM_SHUT
### Response:
(Severity: 2), (Category: L2), (Description: The system has notified a process that it is critically short of memory and the process is shutting down.), (Recommended Action: Free memory by removing configuration and then start l2vpn_mgr using 'process start l2vpn_mgr'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_MESH_ID_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the auto-mesh tunnel aborted since all tunnel IDs in the range have already been allocated.), (Recommended Action: Increase the auto-tunnel mesh tunnel range or remove unused auto-mesh tunnels.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-PID
### Response:
(Severity: 2), (Category: L2), (Description: The PID information is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA), (Recommended Action: No actions are required as this is just an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-BAGS_UNREG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to unregister a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FAIL_FILE_IO
### Response:
(Severity: 4), (Category: INSTALL), (Description: The Install Helper failed to read/write a file), (Recommended Action: This error occured while copying an MBI file from RP to the DRP disk. This error will be recovered automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-EVM_INIT_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This is a fatal error. The verification daemon will be unable to process any events. The process will restart in an attempt to clear the error condition.), (Recommended Action: If the error message indicates a potential out of memory condition Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are optional PIEs in IOS XR?
### Response:
Optional PIEs are additional packages that provide specific features or functionalities beyond the base IOS XR unicast routing bundle. Examples include PIEs for MPLS, multicast routing, manageability, diagnostics, and documentation. Optional PIEs can be installed on top of the base IOS XR image as needed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PUNT link has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-EJECTOR_NOT_CLOSED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Card will not power up if the ejector lever is not in close position.), (Recommended Action: Check if ejector is being placed in close position. Try to re-seat the card again if ejector lever cannot be closed properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPGAMGR-3-SHM_WIN_SETUP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The process was unable to map and configure a shared memory window, causing the process to return unexpectedly. Debugs will provide more info), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_PM_DELAY_EXCEEDS_THRESHOLD
### Response:
(Severity: 5), (Category: OS), (Description: PM delay metric has exceeded threshold specific in the performance-measurement sr-policy delay-profile.), (Recommended Action: None. This is a solicited message (by 'performance-measurement delay-measurement logging delay-exceeded' \ policy configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-UNREG_NOT_REG
### Response:
(Severity: 3), (Category: HA), (Description: Client is trying to register, which is not even registered.), (Recommended Action: Collect show tech watchdog and show tech sysmgr contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-0-CHASSIS_OVERTEMP_SHUTDOWN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Chassis ambient temperature has risen at or over shutdown temperature threshold (STT). Entire chassis shutdown commencing.), (Recommended Action: No action, this alarm and functionality is deprecated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCF-7-INIT_LTRACE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This log indicates that SCF server was not able to initialize tracing. As result of this error, SCF server will not have any tracings.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-SEM_CRIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered critical correctable error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_FIB_NPU-3-INT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the SSE FIB NPU to indicate that an internal error was seen when trying to check consistency of internal data structures.), (Recommended Action: Please collect the console log, FIB NPU traces (show cef trace loc <>), FIB NPU platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-ERR_LWM_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An internal error was detected when trying to send a LWM message. There are several scenarios which can cause this error condition. Error message describes the exact cause.), (Recommended Action: No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-MSG_TYPE
### Response:
(Severity: 7), (Category: HA), (Description: A message with an unknown type was received.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_PIDB-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A run time error occurred during the pidb operation on the linecard. The reason for the error is dispalyed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers sip-pm trace pidb location <> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers sip-pm trace pidb location <> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-IM_RSP_SERCHANNEL_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Rx serdes fault detected/cleared on IM to RSP serchannel), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IPV6CP_SCAN_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error when scanning for IPv6CP configuration. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SubDB service, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_LTH_FIFO_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet length FIFO multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ASIC_INIT_FAILURE_SLOT_INST
### Response:
(Severity: 3), (Category: FABRIC), (Description: The asic initialization failed due to the above mentioned error.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_7_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does configuration navigation work in IOS XR?
### Response:
IOS XR supports hierarchical configuration navigation similar to IOS. You can move between configuration modes using commands like 'interface', 'router', 'line', etc. The 'exit' command moves up one level, while 'root' returns to the top level global configuration mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-EVENTBLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to event block in parser server failed. Parser may exit in this case. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SEIPC-3-OPERATION_FAILURE_STR
### Response:
(Severity: 3), (Category: OS), (Description: A critical error during the initialization of Service Engine IPC. The cause of the error will be mentioned in the message displayed. Here is a list of possible reasons for this message (not all-inclusive). - Failed to handle ip addr. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries handle ip address.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-5-DUMP_FAILURE
### Response:
(Severity: 5), (Category: OS), (Description: Dumper opens each configured and accessible path and start dumping the core in one of the configured path. If the path is not accessible or invalid or if there is no free space left on the configured path, then core dump might fail, in that case the default path /tmp/dumper should contain the core file.), (Recommended Action: Please ensure that enough free space is present on the configured path(linux command: df -kh . can be used). Collect the following data and contact support. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE0_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE0_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-7-DBGINIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: The debug event initialization failed. The ora docker will still run correctly, but debug commands may be unavailable.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_UNCOMPRESS
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be uncompressed, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP transport connection-mode passive feature?
### Response:
The BGP transport connection-mode passive feature allows a BGP router to only passively establish TCP connections for a peer, rather than actively attempting connections. The peer must be configured to actively establish the connection. It is configured with the neighbor transport connection-mode passive command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-3-ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The CCSQ driver failed to initialize the device resulting in the restart of the CCSQ driver process.), (Recommended Action: Collect all the event logs and the output of the following command executed from the CLI of the active RP: 'show process ccsq_mgr' Also, collect the fabric snapshot: 'show fabric-snapshot file <> loc <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-GROUP_SEND_RINFO
### Response:
(Severity: 7), (Category: OS), (Description: When RDS library invoked GSP api group_send_rinfo , it failed.), (Recommended Action: This is a Debug message. No action required. If problem persists,contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some of the best practices for monitoring and troubleshooting in Cisco IOS XR?
### Response:
Some best practices for monitoring and troubleshooting in Cisco IOS XR include regularly checking system logs, monitoring CPU and memory utilization, setting up SNMP for proactive monitoring, using EEM for automated event handling, and leveraging the extensive command-line interface for detailed troubleshooting.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-CHKPT_NULL_PTR
### Response:
(Severity: 7), (Category: SERVICES), (Description: Failed to do further processing because we got a null data when a non-null value was expected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-LABEL_INCONSISTENCY
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKEND-7-MISMATCH
### Response:
(Severity: 7), (Category: SYSDB), (Description: The backend library has detected a mismatch between the actual and parsed values of a node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET_LOOPBACK-3-DEBUG_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize debug in the platform Ethernet loopback component), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-TFTPSERVER_SOCKET_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The opening/binding of the socket for the tftpserver thread might be failing as mentioned in the message. The process will exit and respawn itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-INVALID_ENV
### Response:
(Severity: 3), (Category: INFRA), (Description: Invalid environment variables detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_MGT_CV_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 MGT code violation on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_1_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are BGP peer groups and what are their benefits?
### Response:
A BGP peer group is a group of neighbors with the same update policies. Update messages generated for one member of a peer group are replicated for all other members. Benefits include conservation of memory and CPU resources, configuration simplification, and faster convergence.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-UPDATE_COMPLETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process unexpectedly failed an attempt to signal to the RIB that the given table is now in sync), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-MISC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-SPAN_INIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A failure has occurred while initializing span on the router.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REPLACE_COMMIT_ALREADY_OP_IN_PROGRESS
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install commit as part of the replace operation is not attempted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-SIA_INSUFFICIENT_LICENSE
### Response:
(Severity: 2), (Category: LICENSE), (Description: Number of SIA license(s) used is more than available. Software upgrades will be blocked once the SIA grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: The customer should deposit the required SIA licenses in the virtual account.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-GETPIDFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet Server failed to get the client's pid. This will prevent the client from connecting to packet server.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_UNPACKTUP
### Response:
(Severity: 5), (Category: SYSDB), (Description: The packed tuple returned from SysDB is in some way corrupt. The data it contains could not be read.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-ASYNC_MSG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Received unexpected async message type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.=)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-NH_DB_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured when trying to clear redist information for a client.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-ERR_PATH_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv6_rib_batch_delete_path.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-MUTEX_LOCK
### Response:
(Severity: 3), (Category: OS), (Description: Failed to lock the mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-MPLS_LABEL_BLK_RW_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Service-layer could not program the label in Label Switching Database.), (Recommended Action: Programming for label block failed in Label Switching Database. This can occur if label block parameters do not match with other allocated or configured label blocks in the system. Correct the system configuration to free up label block being programmed through Service layer. Look at Service Layer traces and show commands for more information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-MIBINSTALL
### Response:
(Severity: 4), (Category: SNMP), (Description: An error was encountered during installation of a new MIB or deletion of an old MIB. These messages are printed when MIB installation/deletion failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-THREAD_CREATE_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Event Thread creation failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_FIFO-7-DEBUG_INIT_ERROR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOTHRA-3-FATAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A fatal error occurred in mothra Driver which involves exiting the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-X86_XFORM_AFTER
### Response:
(Severity: 7), (Category: HA), (Description: To print the values after conversion.), (Recommended Action: X)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the mutex synchronization mechanism?
### Response:
A mutex (mutual exclusion) lock is used to protect shared data. Before accessing the data, a thread must acquire the mutex. This blocks other threads from accessing the data simultaneously. When the thread is done, it releases the mutex, allowing other threads to acquire it. This prevents race conditions and data corruption.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-POWERRELOAD_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the node is being reloaded because of a critical environmental alarm.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-7-RIB_TABLE_INFO
### Response:
(Severity: 7), (Category: ROUTING), (Description: A warning was encountered during some operation for the specified address family and RIB table. This could be due a software timing issue, caused by configuration changes.), (Recommended Action: This behaviour is expected, if the table has just been unconfigured. No action is needed unless there are any operational problems.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-6-LOW_FAN_SPEED_WARNING
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational msg indicating that the fan is spinning very slow.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_POLICY-3-ORA_ORABUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-MUTEX_INIT
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemon was unable to initialize the internal state mutex. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key platforms that currently run Cisco IOS XR?
### Response:
The main platforms running IOS XR are the Cisco CRS-1 and CRS-3 carrier routing systems, Cisco 12000 series routers, and Cisco ASR 9000 series aggregation services routers. IOS XR is designed for distributed, carrier-class routing platforms.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-6-CONFLICT
### Response:
(Severity: 6), (Category: L2), (Description: A conflict failure occured The message contains info about the cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Fix the confguration error for proper operation of SONET APS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_BUF_CRC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected excessive input buffer CRC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-PD_MINI_REMOVAL_AFTER_SU
### Response:
(Severity: 4), (Category: INSTALL), (Description: Due to lower disk space platform opted for mini iso removal post system upgrade), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FAILED_SDS_CONNECT
### Response:
(Severity: 4), (Category: INSTALL), (Description: A node was unable to connect to a Software Download Server and will try to directly connect to the Install Director on the dSC as a result. This may be due to a failure in updating the LRd inventory following a change in the state of an SDS. The install operation should download software directly from the dSC and should not be impacted. However, if many nodes attempt to get software directly from instdir other processes may be impacted by high CPU usage.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support in-service software upgrades (ISSU)?
### Response:
Cisco IOS XR supports ISSU by allowing software upgrades without interrupting the router's operation, ensuring continuous network service during the upgrade process.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-6-KERNEL_DUMP_MSG
### Response:
(Severity: 6), (Category: IP), (Description: A kernel dump started/finished to the file as mentioned in the message from a remote node via TFTP.), (Recommended Action: This is an informational message. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-3-TIMER_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the RAW process sets up and initializes the various RAW timers.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to roll back to a previous configuration in Cisco IOS XR?
### Response:
To roll back to a previous configuration, use the 'rollback configuration' command in global configuration mode. RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)#rollback configuration last 1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The dsc process could not allocate memory. This indicates some problem with the system wide memory.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If it is still non-operational, restart the driver by executing the following command at the CLI of the active RP: 'process restart dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-3-INVALID_FD
### Response:
(Severity: 3), (Category: L2), (Description: An event was received with an unknown fd), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-ADDROUTE
### Response:
(Severity: 2), (Category: ROUTING), (Description: An error occurred whilst trying to insert a net to the BGP table database.), (Recommended Action: 'This error occurs when we are not able to add a net to the BGP table' 'database. In some cases the nbr that had sent that net would reset ' ' and the issue would recover. In other cases you might see an ' 'accompanying low memory message. Please check to make sure you have ' 'enough free/available memory on the router. ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'af-group' in IOS XR BGP configuration?
### Response:
An af-group allows the definition of common address-family (AF) specific configuration parameters that can be inherited by multiple neighbors for a given AF. This simplifies configuration when many neighbors require the same AF configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-4-WARM_RESET_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the NPU Driver to indicate that it failed to perform warm reset of specified NPU instance due to the specified reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: BPE Event Manager notify error), (Recommended Action: Please attempt to correct the error by restarting the process by issuing the command in exec mode -process restart bpe If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-2-DEVICE_HALT
### Response:
(Severity: 2), (Category: FABRIC), (Description: CCSQ, ASIC got halted. The halted block and its parent block are provided), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-2-MODULE_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Either an internal PEM error, an over voltage/current/temperature shutdown or an external input feed error.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB_MAIN-3-SYNC_HDLR_ATTACH_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to attach sync event handler for process fsdb_fadb), (Recommended Action: Search the event logs for events/errors related to the failure reason. Event management is part of overall system. If there are failures here then other processes may also exhibit similar problems. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-6-UPGRADING
### Response:
(Severity: 6), (Category: MEDIA), (Description: Regular nvram: file system is in upgrading process), (Recommended Action: Nothing needs to be done)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_WL_OUT_OF_RANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-ERR_INVALID_GROUP
### Response:
(Severity: 3), (Category: SECURITY), (Description: AAA failed to recognize the specified server group name. It may be undefined.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-MPA_UNSUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This MPA does not supported in this system. Please check with Cisco tech team for more informtion.), (Recommended Action: Remove it from the system or migrate to software which supports it. Alternatively unsupported MPA can be shutdown using CLI '(config)#hw-module subslot <> shutdown')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_LIB-3-FAILURE_TO_CACHE_FILE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The platform library service call to failed to cache the file contents of the Board's EMT file), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_7_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-MPA_OPTICS_OVERTEMP_FAULT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Over Temp Fault Observed for Optics and Optics will go to Fault State. Please check with Cisco tech team for more informtion.), (Recommended Action: Do the Optics OIR or MPA reload to recover the Optics from Fault state. If the issue occurs under other conditions, then copy the error message exactly as it appears on the screen and collect console log and the following information. Contact your technical support representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-INVALID_PORT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Forwarder was supplied with a plim port or uidb index that exceeds the limit of num ports.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_FRAME_ERR_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For UTI mode alarm is raised if frame error rate exceeds 2%.), (Recommended Action: 1) Ensure valid BITS/UTI signal is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_UCORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory uncorrectable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-MAINT_IMG_NOT_FOUND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Maintenance Image could not be located in the indicated path.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-ERR_PACKET_INVALID_MSTI
### Response:
(Severity: 4), (Category: L2), (Description: A packet has been received referencing an unknown MSTI, despite the packet being viewed as internal. This probably indicates an inconsistency on the other end.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTDIR_INVENTORY-7-NULL_PTR
### Response:
(Severity: 7), (Category: INSTALL), (Description: A client of the Install infrastructure passed a NULL pointer. The current request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-MARTIAN_SOURCE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Ignoring sa cache creation for Martian source.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_Manager-3-UPGRADE_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Update FPD upgrade ERROR), (Recommended Action: Customer immediately knows the reason of failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-COID_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: coid does not match with the ethernet server coid (server_coid) %d- coid %d- server coid), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_EVM_CONN_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-1-BACKUP_NOT_READY
### Response:
(Severity: 1), (Category: HA), (Description: RMF has determined that the backup process groups are NOT ready because of the failure of one or more events the prevent it from being in-sync with the primary process groups.), (Recommended Action: Use show redundancy to see not ready reason. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-DECODESTR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The sysdb decode operation failed. The error message is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVALIDVERSION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The version of this file is too old or wrong'.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encounterd some error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP temperature greater than or equal to the high temperature alarm threshold. The SFP is the pluggable optics on the line cards. The temperature threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational, and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-XAUI_0_FRAG_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XAUI interface to NPU-0 reported fragmentation error on TX side on bridge instance - 2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO-3-CLUSTER_OFFLOAD_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CFM is configured over bundle interfaces with bundle members configured on standby DSC of cluster. Bundle offload is globally configured. Bundle offload is only supported on line cards on the primary DSC.), (Recommended Action: Either disable the bundle offload globally or remove the bundle members from line cards on the secondary DSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-EVM_CREATE_ERR
### Response:
(Severity: 3), (Category: SNMP), (Description: The creation of socket with event manager failed due to some reason. The argument depicts the reason of the failure.), (Recommended Action: Copy the message exactly as it appears, and report it to your technical support representative with required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option explicit feature?
### Response:
The MPLS TE path-option explicit feature allows the path for an MPLS TE tunnel to be explicitly specified using a configured path. An explicit path is a list of IP addresses or interface names that define the tunnel's route. Explicit path-options override dynamic path calculation and provide exact control over the tunnel's path.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-SOCKET_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified socket operation failed.), (Recommended Action: Such errors are possible during raw_ip restarts. If seen otherwise, these errors should be reported to SUPPORT.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-LINK_RESET_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An attempt to reset the PCIe link has failed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-EVENT_MGR_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A problem occurred while calling the event_manager_create() API during the initialization of the mapping-agent.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging | inc err<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging | inc err<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_EA-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: An unexpected internal error has occurred in the IPSec SVI EA process. The process will restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-5-PARTITION_REASON
### Response:
(Severity: 5), (Category: MEDIA), (Description: The media storage card specified is going to be (un)partitioned due to the specified reason.), (Recommended Action: Restore any lost data on device due to partition table update and formatting of all partitions.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_MALLOC_LEN
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTIO-6-NO_PORTS
### Response:
(Severity: 6), (Category: L2), (Description: The VTIO SPP plug-in found no ports to manage. No packets will be sent/received in SPP (except fabric loopback packets) on this node.), (Recommended Action: If any problems are seen, they may be rectified by ensuring that the specified topology file contains interfaces for the current node and rebooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-SDWRAP_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Debug infrastructure error.), (Recommended Action: Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_SYSDB_UNPACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_3_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-DEV_CFP_PID_NOT_SUPPORTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PID not supported error was detected during CFP initialization. A PID not support error is reported when either the PID can not be read it not supported on the platform. The CFP is the pluggable optics on the line cards. CFP initialization may happen when linecard boots up, CFP OIR and line card process restart. Traffic will not be impacted by this error.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp router-id' command in IOS XR BGP configuration?
### Response:
The 'bgp router-id' command is used to manually configure the BGP router ID. By default, the BGP router ID is chosen as the highest IP address configured on a loopback interface. If no loopback interface is configured, the highest IP address from the physical interfaces is chosen. Manually configuring the router ID provides stability in case of interface flaps.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPPIF-2-INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the lc idb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-API_INFO_DUMP
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Displaying mbus API debug information. The argument indicates information message to be displayed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-LRD_NOTAVAILABLE
### Response:
(Severity: 7), (Category: MEDIA), (Description: The Standby card has been either removed or put down by admin), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-5-AIS_PWFAULT
### Response:
(Severity: 5), (Category: L2), (Description: L-AIS insertion/removal notification messages.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP_LIB-7-EXIT_MESSAGE
### Response:
(Severity: 7), (Category: IP), (Description: NTP process exits and restarts when it detects a failure. If the error does not persist it can be ignored.), (Recommended Action: None required if NTP process restarts and recovers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGMP_MTRACE-3-EVENT_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Event error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FSM_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shelfmgr failed to inject the given event into the FSM for the given node.), (Recommended Action: Restart shelfmgr process on active RP. If problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-ERR_INTERNAL_SW
### Response:
(Severity: 3), (Category: FABRIC), (Description: The 140G fabric POD DLL encountered the annunciated internal SW error. It likely affects the operation of the fabric POD and the fabric subsystem on the multi-chassis.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-FI_LINK_BRINGDOWN
### Response:
(Severity: 4), (Category: FABRIC), (Description: A fabric link was brought down due to too many UCE or parity errors.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DATABASE-4-TRACE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is a non-fatal error and can happen when router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-CONFIG_DOWNLOAD_STARTED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Config download is triggerred'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-ERR_SECURITY_TTL_OPT
### Response:
(Severity: 4), (Category: OS), (Description: security ttl feature is not effective. As OPSF protocol entries being optimized in TCAM, enabling this feature on selective OSPF neighbors is not permitted), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard for security ttl to be effective. Other options is to reload the linecard. Or remove and re-apply the interface configs in ospf.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-LOOPBACK_CANCEL
### Response:
(Severity: 6), (Category: L2), (Description: An attempt has been made to start loopback mode from both peers simultaneously. As per the IEEE 802.3 OAM specification, this OAM client has cancelled the request as the local MAC address is lower than the remote MAC address.), (Recommended Action: Retry the Loopback operation from this peer once the remote loopback session on the remote peer has been terminated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPC-2-HW_ERR
### Response:
(Severity: 2), (Category: MGBL), (Description: Data plane HW error interrupt occurs.), (Recommended Action: Check if the DPA reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-PRESHARED_KEY_NOT_FOUND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to find pre-shared key.), (Recommended Action: 'Contact administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LAMPTEST-6-COMPLETE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Test of all system LEDs has now finished.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-PHY_FPGA_SERCHANNEL_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Transmit serdes signal issue detected/cleared between PHY and FPGA.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_PROXY-3-ERR_CONN_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fabric proxy failed to connect to the required services. The driver will be non-operational due to this error.), (Recommended Action: The Proxy will recover by restarting. Verify that the fabric proxy process will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_ECSR_1
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an eCSR1 access error.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-SIA_LICENSE_TERM_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The term of the SIA license has expired.), (Recommended Action: The customer should reserve a valid license.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-EAOPT_KEYMAX
### Response:
(Severity: 3), (Category: IP), (Description: TCP Enhanced Authentication header has 6 bits for the keyid, hence, the send key can't be more than 63.), (Recommended Action: Change the keychain configuration to not have a key-id greater than 63. No need to re-configure it under BGP or to clear BGP neighbors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-PA_CONN_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to open a client connection to PA.), (Recommended Action: Restarting the client may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_LQ_PKT_LEN_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 0 LQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some of the major functionality areas included in the composite .vm bootable file?
### Response:
The composite .vm bootable file contains the following major functionality areas: operating system kernel, base image, admin plane features, and routing and forwarding bundles.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-INVALID_PORT
### Response:
(Severity: 3), (Category: IP), (Description: 'The port specified on the command line can not be converted'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED_LIB-3-PLATFORM_GET_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A placed client API failed in the call to platform api to get its nodeid or node name. Its an issue with platform call.), (Recommended Action: Collect the function name and traceback information in addition to the below show commands and forward to your next level of technical support. show commands: show tech placed, show tech sysmgr, show redundancy summary, show redundancy trace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-TRACEBACK
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The traceback info about caller), (Recommended Action: It is an informational message along with packet depletion log message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM_CLIB-3-TLV_DECODE_ERROR
### Response:
(Severity: 3), (Category: IP), (Description: This is an internal error. It indicates that an address information structure couldn't be decoded correctly. This could leave the affected process in an inconsistent state.), (Recommended Action: Get the output of show tech-support, show arm [ipv4/ipv6] trace, running coredump of the process. Unconfiguring, reconfiguring the interface may help in recovering the from error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-PCI_MAP_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-0-INIT_FAILURE
### Response:
(Severity: 0), (Category: MGBL), (Description: An error was encountered while initializing one of the critical modules of the tacacsd. Without proper initialization of this module, tacacsd can not operate properly. Initialization will be retried.), (Recommended Action: tacacsd is a critical component and must be operational in order to configure the router. If the same error is seen more than 5 times, contact Cisco TAC support because a reboot of the node may be required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFI_EA-4-RETRY
### Response:
(Severity: 4), (Category: L2), (Description: The SFI EA process has retried programming SFI interface(s) because other processes are not ready.), (Recommended Action: If the retry does not succeeded in some time, remove and re-create the SFI Interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-VLAN_INSTANCE_LIMIT
### Response:
(Severity: 4), (Category: L2), (Description: The supported number of PVRST or PVSTAG VLAN instances on this line card has been exceeded, or has been brought back under the limit. When the limit has been exceeded, PVRST or PVSTAG may not operate correctly or there may be an adverse performance or scalability impact on the rest of the system.), (Recommended Action: Unconfigure some VLAN instances until the total number configured for interfaces on this line card is beneath the limit.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-7-CERR_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP graceful restart feature?
### Response:
BGP graceful restart is used to preserve the forwarding state when a BGP session goes down, allowing traffic to continue to flow while the control plane restarts. It requires the graceful restart capability to be exchanged when the session is established. It is enabled with the bgp graceful-restart command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINK-5-DAMPENING
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The interface dampening state changed. When the state is 'suppressed' the interface will be held down. In 'unsuppressed' state, link state changes are allowed to occur as normal.), (Recommended Action: If the dampening state change was unexpected, confirm the configuration settings for the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install rollback command in IOS XR?
### Response:
The 'install rollback' command is used to revert the system back to the previously committed software set. This is useful if issues are encountered after performing an installation or upgrade.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PARTICLE_HUGE_POOL_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Huge pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-EVENTMGRCREATE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to create parser event manager failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-MEMORY_RECOVERY_KILL_SYSMGR
### Response:
(Severity: 6), (Category: HA), (Description: The sysmgr process with the indicated name and pid has been killed in an attempt to recover system memory. The process can be manually restarted if desired, but may continue to consume large amounts of memory.), (Recommended Action: The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIAD-7-UNLINK_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: PCMCIAD failed to unlink instance of child file name shown), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture console log and dumpcore of process pcmciad.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP maximum neighbor feature?
### Response:
The BGP maximum neighbor feature allows a limit to be placed on the number of dynamic neighbor connections that can be established as a result of the BGP dynamic neighbor feature. It protects against resource exhaustion. It is configured with the bgp max-neighbors command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY-3-EVMCREATE
### Response:
(Severity: 3), (Category: OS), (Description: The filecopy_process was unable to create an event manager. The filecopy_process will shut down since it cannot receive any events. Try restarting the process - if the error continues, contact customer support with the error message and associated context.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_ETH_MGMT-3-EVM_CREATION_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error detected when creating the event manager. process will restart automatically to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET0_INTR_CRC32_CHK_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET0_INTR_CRC32_CHK_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_LOCKING_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unxpected error occured while trying to lock or unlock an IS-IS resource. This implies an internal software programming error.), (Recommended Action: Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-5-DP_CONGESTION_CLEAR
### Response:
(Severity: 5), (Category: L2), (Description: The layer 2 multicast data plane hardware programming has been resynced with the state in the IGMP snooping application.), (Recommended Action: The system is attempting to recover from a layer 2 multicast data plane programming congestion condition. No user action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_SYSDB_API
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to perform a sysdb api call. The module which is calling this api, the description of the api and the error is displyed in the error message.'), (Recommended Action: collect show parser trace, show logging, any abnormal console message, and configuration of the router. Then send this output to tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ce_iso-2-FAULTCE_DISABLEPORT54_55
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fault detected while disabling the port because of the failure of disabling functionality. Isolating RP node from the CE network is failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD-3-INIT_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Service Director has failed to start up. The operation being attempted is detailed in the error message. The Service Director will be restarted automatically.), (Recommended Action: If the error indicates an Out Of Memory error, then attempt to increase the available resources. Otherwise, if the error persists, contact your technical support representative copying the error message exactly as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAAD-3-ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: An error was encountered. The failure of this is not critical to aaad but may have significant impact to general system operation.), (Recommended Action: If the error persists, copy the error message and trace exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-ADJCHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: Adjacency to SYSTEM-ID (INTERFACE-NAME) Up|Down, REASON. The adjacency to the system with SYSTEM-ID has gone up or down due to REASON.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-UNKNOWN_BOARD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the board type cannot be recognized, therefore, the node will not be able to boot up. This usually caused by an invalid eeprom content.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-6-ACE_SYSLOG_INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: ACE SPA SYSLOG message), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-ECM_CREATE_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to create event connection manager.), (Recommended Action: The process would recover itself from this error as there is a retry mechanism. If the error is still seen restarting the clients may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-DEQUEUEFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server failed to remove the specified client from the client list queue. This may cause the client fail to reconnect to packet server.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_SN_THRESHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-ASYNC_LISTEN_CLOSE_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The socket library has noticed an attempt to close an ASYNC listen socket in error. This could place the system in an inconsistent state. The message may be ignored, if it was seen when a TCP application crashed or was either restarted or shut.), (Recommended Action: If not seen during a process restart of tcp, please collect the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-4-WRONG_KEY
### Response:
(Severity: 4), (Category: SECURITY), (Description: Tacacs+ server key configured on the router is wrong.), (Recommended Action: Please configure correct key on the router for the tacacs+ server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-MA_SHUTDOWN
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This messages indicates that a failure has occured while PBR is gracefully shutting down. Particular reason is included in the message.), (Recommended Action: Allow PBR MA to exit and validate with the command <CmdBold>show process pbr_ma location <node id><NoCmdBold>. If it does not exit, use <CmdBold>process restart pbr_ma location <node id><NoCmdBold> to recover. If the problem persists, contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-TOP_MEMORY_USERS_WARNING
### Response:
(Severity: 4), (Category: HA), (Description: This message is emitted when system memory usage crosses a threshold in the direction of increasing memory exhaustion. The top memory users will follow in the next messages. There may be a memory leak or misconfiguration.), (Recommended Action: Collect the data from the following messages and attempt to determine what is driving memory usage. Forward the messages to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-6-LICENSE_CLEAR_FEATURE
### Response:
(Severity: 6), (Category: LICENSE), (Description: As a result of 'clear license' command execution, license features installed on this system were cleared.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-IDPROM_READ_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The read of the one_wire prom for the given slot has failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_P2MP_SRVR-3-EVM_EVENT_BLOCK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in the event loop. p2mp server process will exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-6-SVC_INFO
### Response:
(Severity: 6), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-SA_NOT_AUTH
### Response:
(Severity: 3), (Category: SECURITY), (Description: The IKE security association with the remote peer was not authenticated; yet the peer attempted to begin a Quick Mode exchange. This exchange must only be done with an authenticated security association.), (Recommended Action: 'Contact remote peer's administrator.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO_COMMON-4-VERIFY_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: Whilst exiting, an error was encountered cleaning up a common module. The process will exit anyway, and no further errors should be seen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FSMTIMEOUTD_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is not able to boot up. If an XR-hello is not recieved within a specified time limit, then the node will go to ENA-FAILURE.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-INVALID_ID
### Response:
(Severity: 3), (Category: OS), (Description: Shmwin server detected invalid window ID or group ID in shmwin meta data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture meta data file /etc/platform_shmwin, 'show version', and 'show shmwin trace server' output)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KEYCHAIN-3-SYSDB_ERROR_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: The SysDB (System Database) is a system registry which stores the system state information as well as the process-specific information. A problem occurred so that the connection to this system database could not be established.), (Recommended Action: Restarting the keychain server process (kc_srvr) with the command 'process restart kc_srvr' might solve the issue. If the message recurs, issue the following command 'show tech-support sysdb' and 'show key chain trace client <clientname> both' to gather data and provide the gathered information and the exact error message as it appears, to the Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-INVALID_MTU
### Response:
(Severity: 4), (Category: IP), (Description: Minimum IPv6 MTU must be 1280. Available ipv6 mtu is not within the valid range.), (Recommended Action: Adjust the lower layer mtu such that atleast 1280 bytes is available to ipv6.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-CLIENT_START_DATA_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get client start data.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-3-PM_INIT_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The SLA Profile Manager failed to initialize correctly, and will now exit. It should be restarted by SysMgr.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB (D)RP component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PREF_COMPR_LIB-6-V6_CMPR_FAILED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: V6 source prefix compression failed due to lack of extended path. This failure indicates that a particular v6 prefix indicated in the message will not be compressed. There are 3 workarounds of this problem. 1) do not use this entry. 2) change the prefix length. 3) change the prefix value. For example if an entry failed. 4) use the compression anchor prefix cli controller sse tcam location R/S/I compression ipv6 anchor-prefix to configure the common IPv6 prefix lengths during an ACL programming then try removing that ACE indicated in the message and apply the configuration again. *DDTS*), (Recommended Action: Ouput generated by this message and related config, for example v6 ACL failed in case of ACL configuration. Attach them to the ddts. This failure indicates that a particular v6 prefix indicated in the message will not be compressed. There are 3 workarounds of this problem. 1) do not use this entry. 2) change the prefix length. 3) change the prefix value. For example if an entry failed during an ACL programming then try removing that ACE indicated in the message and apply the configuration again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-3-ERROR
### Response:
(Severity: 3), (Category: SERVICES), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_7_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FURIA_LIB-3-CDR_REPEATER_MODE_RECFG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CDR Repeater Mode Status), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-DB
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected error occurred whilst the VTY Device DLL was using the TTY DB library.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR* *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_XRV9K-3-ERR_LTRACE
### Response:
(Severity: 3), (Category: L2), (Description: BFD PLAT was unable to initialize the tracing services. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: Collect all the event logs and the output of following command executed from the CLI: 'show process bfd_agent location <loc>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCONBKUP-7-REPLY_ERR
### Response:
(Severity: 7), (Category: MGBL), (Description: Error encountered while replying message during ASCII System Configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure MPLS L3VPN VRF selection based on source IP?
### Response:
To configure MPLS L3VPN VRF selection based on source IP, use the 'vrf select source-ip' command in global configuration mode. vrf select source-ip vrf MyVRF
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-ERR_DRV_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: SFE driver failed initialization due to the above reason), (Recommended Action: The driver will restart and try to recover. Make sure the driver restarts and recovers. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_CFEC_AIS_DEM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-PLL_T4_STATE_FREERUN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the T4 PLL output is free-running.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_EVC_EVM_HANDLER
### Response:
(Severity: 4), (Category: L2), (Description: During initialization, SSRP failed to register for input or output notifications for the specified service. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-4-SERVER_ERR_CLINFO_UNHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: IGP failed to release its client's message channel information. This could be a result of channel down already.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-MEMORY
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent was unable to allocate the required amount of memory, as the HTTP process has run out of resources. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_SYSDB_UNREG_NOTIFY
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to unregister for notification of changes on the displayed SysDB path. The error will not affect IS-IS operation but does indicate unexpected system behavior.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-HOST_SLAVE_QUEUE_FULL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects HOST_SLAVE_QUEUE_FULL and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-6-ENFORCE_METERED_USAGE
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing is enabled with the metered billing method.), (Recommended Action: 'INFO')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can a default route be originated in BGP?
### Response:
A default route can be originated in BGP in two ways\n1) Using the default-information originate command, which will originate a default if one exists in the routing table.\n2) Using the neighbor default-originate command, which will originate a default to a specific neighbor unconditionally.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-SA_NOT_OFFERED
### Response:
(Severity: 3), (Category: SECURITY), (Description: IKE found SA not offered), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-PCI_RAM_UNCORRECTABLE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates an uncorrectable multi-bit error occurred on this internal SRAM. %s - name of ram that error occurred %x - key of error node recorded %s - error data), (Recommended Action: Ignore the message if appears only once. Otherwise reload the board Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-FBU3_LOW_RESOURCE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects FBU3_LOW_RESOURCE and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-INSTALL_UNREG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to unregister with the packaging subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-INT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the OFA FIB to indicate that an internal error was seen when trying to check consistency of internal data structures.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-MBI_BOOTING_HOLD_BOOT_IN_MBI
### Response:
(Severity: 6), (Category: INSTALL), (Description: Nodes can not boot up while the platform determines that they have to be held in MBI. Once the platform lifts the hold then the node will be allowed to complete its boot as normal. recommended_action: *NONE*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-KDUMP_DONE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OS running on the indicated card is reporting kdump has ended.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NLMMIB-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: The requested operation could not be performed due to a low memory condition.), (Recommended Action: 'Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_FGID_DOWNLOAD_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: The message is seen when initial FGID download from the FGID server to SFE driver does not get completed even after multiple attempts to reset the EES connection. This means the communication between SFE driver and FGID driver is broken and indicates a EES transport issue.), (Recommended Action: Capture the output of the CLIs as specified in required_info and contact your Cisco technical support representative. Once the required information is captured, a restart of sfe_drvr process on the affected fabric card, followed by a restart of fgid_server process on the appropriate RP/DRP can be attempted to recover from this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-SAME_SID_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the OFA FIB to indicate that same sid label is used for L2-Adj-Sid and L3-Adj-Sid), (Recommended Action: Remove the conflicting configuration and reload the router Please collect the console log, show tech-support cef platform. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ACL_GETLIST_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OLM-7-NO_ACTIVE_IPCC
### Response:
(Severity: 7), (Category: ROUTING), (Description: All IPCCs are down or removed for a neighbor.), (Recommended Action: Create a new IPCC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-6-PROTOCOL_STATE_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: The operational status of the E-LMI protocol on the interface has changed. If undesired, the notification of protocol events can be turned off by configuring 'log events disable' on the interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-6-OPTICS_INSERTION
### Response:
(Severity: 6), (Category: L2), (Description: Optics module has inserted %d - bay number %d - port number), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-IDBERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error encountered while attempting to activate an idb. Problem could be corrupt data from IM or IP/ARM or the FRIS.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_EA-3-BAD_INTF_EALIB_SERVER_CONTEXT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Interface EA detected a software error where the received library server context does not match the expected value.), (Recommended Action: No action is required as the software has rejected the transaction request.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_CRP-3-GEN_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: General Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process candidate-rp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process candidate-rp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-DEVICE_NOT_REGISTERED
### Response:
(Severity: 7), (Category: OS), (Description: Caller's device is not yet registered), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-LTRACE_INIT
### Response:
(Severity: 7), (Category: INSTALL), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_ADD_LC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while creating new node and adding LC to FGID), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-SANITY_CHECK
### Response:
(Severity: 3), (Category: INFRA), (Description: Error message that reboot history file has invalid reboot data), (Recommended Action: No action is required as the software should be able to recover from this error. Collect reboot history file and show log, then check any previous error while saving reboot cause code.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV6_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_6_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_ASYNC_FIFO_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet Async FIFO full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-SEM_POST_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Semaphore Post failed while sending signal to CTRLIO.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBAPI-3-BAG
### Response:
(Severity: 3), (Category: SNMP), (Description: A problem occurred while encoding or decoding information from a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-BOOT_CFG_SYNC_FAILED
### Response:
(Severity: 2), (Category: INFRA), (Description: The IOS-XR install infrastructure has failed to distribute its boot configuration to all nodes. In order to bring the node back into sync, the following steps can be taken: - If during an install operation, wait until the install operation is completed - Restart the process instorchagt on the impacted node. This will force a replay of the boot configuration - If restarting the instorchagt process results in the same message being displayed, the relevant node should be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_CHKPT_DELETE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq encountered an error during Checkpoint delete.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-PUF_MAGIC_CHK_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This indicate a format error in timezone configuration file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_INR_VLAN_SES_THRESHOLD_EXCD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Inner VLAN on the given access interface has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-MUTEX_LOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to create exec's event handling thread), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-0-FATAL_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: SPA Bridge ASIC unrecoverable error.), (Recommended Action: Reboot the card. If the problem persists, replace the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIRROR-3-ERR_EDM_GENERAL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Encountered an error using a sysdb function. The error is displayed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-2-MSG_LOCAL_NODE_NOT_UP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Both the CPUs in DRP needs to be UP for DRP active/standby arbitration. If one of the CPU is UP and the other CPU is not UP, then request shelfmgr to reset this DRP.), (Recommended Action: None; This CPU will reset along with other CPU & SP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-3-PDMA_GSP_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CCI GSP init failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_SYSDB
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error using SysDB APIs. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-BAG_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: An internal bag function failed.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-4-INVALID_MAC
### Response:
(Severity: 4), (Category: L2), (Description: PLIM driver was unable to get a MAC address for the interface.), (Recommended Action: Check if the process 'shelfmgr' is up and running on the RP. Try to reload the LC to see if that helps. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-4-UNLOCK_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: An attempt to lock a mutex failed.), (Recommended Action: Please try restarting the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-GN2412_CHIP_DOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: GN2412 chip shows the register reading 0xff. Recovery action may take place.), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSMGR_REG_LREVT_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper registers with sysmgr for various taks. Sysmgr LR event registration failure. This will lead to unexpected behaviour from dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE0_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE0_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-6-USAGE_STATS
### Response:
(Severity: 6), (Category: SYSDB), (Description: Sysdb statistics have been cleared.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_DPM-3-UDLD
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: There has been a mis-wiring or misbehaving satellite connected over the specified interface - the MAC from which the Satellite is reciving SDACP discovery packets is not the MAC address on which this host is sending them.), (Recommended Action: Check and correct the miswiring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8508-2-UNCORR_ECC_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIE device uncorrectable ECC error), (Recommended Action: This error is a momentary error and software should be able to correct it. If the issue persists please, contact your technical support representative with the gathered information. No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Try to recover from the low memory condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWCMD-7-SVR_MSG
### Response:
(Severity: 7), (Category: SNMP), (Description: 'This is for debug message for show command in snmp to print the buffer '), (Recommended Action: 'This log does not indicate a system impact.' 'all show snmp CLI's for debugging purpose only' 'Recommend customer to re-try the command.' 'If there is no output, reconfigure the snmp settings and re-try')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-TEMPLATE_DEAPPLY_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: The RS232 DLL tried to deapply a template to a TTY but failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-CERT_ISNT_TRUSTED_ROOT
### Response:
(Severity: 4), (Category: SECURITY), (Description: During IKE phase-I signature verification, the initiator will send a list of its CA certificates. This warning will be printed by the responder if none of the CAs in the list is a trusted root. Note this is not necessarily an error, as there may be multiple cert-req payloads), (Recommended Action: 'Contact remote peer and/or his administrator if session doesn't come up')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-3-DRIVER_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a failure log. The Switch that initializes the Mgmt Port has failed. The process will keep restarting.), (Recommended Action: Collect console log and the following information. - show tech-support mgmt)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_DB_CHKPT_RECOVER
### Response:
(Severity: 4), (Category: L2), (Description: When recovering data from checkpoint, an error occurred and the data is lost.), (Recommended Action: Verify that bundle parameters and bundle membership are as expected. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show bundle<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show bundle<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the data is as expected in the output of both commands then no further action is required, otherwise unconfigure and reconfigure any missing parameters.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INV_NODEID_EVT_IGNORE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: API Call to nodeid_extract_fields() failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-MY_DOMAIN_CERT_EXPIRED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'The domain certificate of this device ' 'has expired'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the command to display the OSPF routing table in Cisco IOS XR?
### Response:
To display the OSPF routing table in Cisco IOS XR, use the command 'show route ospf'. This will display all routes that have been learned via OSPF, including intra-area, inter-area, and external routes. The output will show the destination network, the next-hop, and the outgoing interface for each route.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-EA_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to update the hardware packet handling after a configuration update, and retrying the operation has not resolved the problem. This situation could indicate that system resources are low, or a problem with another part of the system. It is possible that CFM will not receive packets that it should be processing, or packet processing may operate more slowly than expected.), (Recommended Action: Restarting cfmd or cfm_ea processes on the affected node may help to update the packet handling correctly. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd' on the affected node. If that has no effect, issue 'process restart cfm_ea' on the node with the affected interfaces. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-TOP_MEMORY_USERS_INFO
### Response:
(Severity: 6), (Category: HA), (Description: This message is emitted when system memory usage crosses a threshold in the direction of increasing memory exhaustion. The top memory users will follow in the next messages. There may be a memory leak or misconfiguration.), (Recommended Action: Collect the data from the following messages and attempt to determine what is driving memory usage. Forward the messages to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-MMAP_STATS_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: mmap of the shared memory required to store shmwin statistic failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture 'show shmwin summary', 'show shmwin trace server', and 'show shmwin trace all'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-ROUTE_RECONCILIATION_IN_PROGRESS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: System is booting in warm mode and is resynchronizing routes with the ASIC. Wait for re-conciliation to complete before changing any configuration or performing any impactive operation.), (Recommended Action: No recovery is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_MISSVALUE
### Response:
(Severity: 4), (Category: SYSDB), (Description: The command entered requires an item value and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-PROC_OPTION_INDEX
### Response:
(Severity: 7), (Category: OS), (Description: An inconsistent process core option index value is found for the total size. Shared memory for keeping process core options could be corrupted by someone. Probably software bug, or OS bug.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_LCPM_SHOW-7-USAGE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Startup option supplied to SKP_LCPM_SHOW is not valid.), (Recommended Action: Please re-enter the correct option as described in the usage message 'Usage: skp_lcpm_show [-I <intf name>] | [-N <node ID>]' the node ID should be used in decimal format. Example: sh controllers pm int Ten0/2/0/0 loc 0/2/cpu0, or run skp_lcpm_show -I TenGigE0_2_0_0 -N 33)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-WARM_RESET_BOOT_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card/CCC came up wiht unexpected reset/boot sequence .i.e. in case of warm reset issued card should follow warm reset/boot sequence but instread driver detected PON exectuting/reporting cold boot up.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PFI-3-SET_GLOBALS_MMAP_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Memory map api failure in Platform PFI api. The returned error code should indicate the reason for the failure of the api. This is a transient error in the system likely due to low mem condition etc. The impact to system is minimal except that some global counters are not set. The client calling this api could retry it or handle it accordingly. If the issue is seen persistently, initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-MGMT_TTY_ATTR_EXTRACT_ERROR
### Response:
(Severity: 7), (Category: MGBL), (Description: The show line command was unable to extract attribute for the TTY.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSHD-3-ERR_CREATE_EVENTMGR
### Response:
(Severity: 3), (Category: IP), (Description: Attempt to create an event manager fails for some reason), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-HBLOSS_COLLECT_COMPLETED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Collection of heatbeat loss log has been completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-SR_POLICY_NULL_LABEL_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current sr policy null label autopush profile and the newly configured sr policy null label autopush profile. Needs attention with LC reload.), (Recommended Action: System LC is inconsistent. Need to reload the LC in order to activate the new sr policy null label autopush profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-7-ERR_DMPG_STATE_OVERWRITE
### Response:
(Severity: 7), (Category: L2), (Description: ASIC error library encountered a dampening state overwrite condition and failed to get valid memory address.), (Recommended Action: A hardware state recovery action might be needed to restore health of asic. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: Due to a low memory condition we not able to process any request or response PDU or we could not allocate memory for context name and not able create view .), (Recommended Action: check the state of process from below CLI's 1)'show snmpd process' 2)'show process block | i snmpd' Please restart snmpd process if still showing the error conatact technical support representative with required info. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_1_OUTPUT_SQUELCHED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in 2MHz and 6.312MHz modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-2-FAULT_CRITICAL
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: Critical fault detected. See syslog for fault name, location and fault details.), (Recommended Action: Critical fault. Find the fault name, location and fault details from the syslog. Use the show fm command on that module, use the show alarms command to see if a corresponding alarm is declared on that location. Based on the module and the fault, use the directions/wiki provided by the module owner to decide further action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_EDM-7-BAG_REG_FAILED
### Response:
(Severity: 7), (Category: IP), (Description: IPV4 Management Agent encountered failure in registering bag format used to encode information sent via SysDB. It will recover itself by restarting.), (Recommended Action: If the problem persists get the output of show processes, show sysdb trace edm, show sysdb trace clientlib job <jid of ipv4_ma>. If multiple instances of ipv4_ma are seen running or trying to run)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-MD5_TO_STRING
### Response:
(Severity: 7), (Category: INSTALL), (Description: Failed to convert package MD5, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-CODEP_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: LMI parameters N392 and N393 are co-dependent - they must obey the rule N392 <= N393. Somehow SysDB is attempting to apply config which conflicts unreconcilably. The parameter being configured is adjusted to be equal to the other.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-TARGET_CFG_COMMIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process failed to commit target config buffer. Configured items will not be committed in sysdb.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMLOG-3-SIGERR
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected signal value was received.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TMCAT_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver version is not compatible with the hardware version.), (Recommended Action: Upgrade the Port controller FPGA image using the FPD procedure followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: LICENSE), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-7-DEBUG
### Response:
(Severity: 7), (Category: L2), (Description: SPA OC192 debug message), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_linux-7-SLEEPON_LOCK_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: deadlock error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-6-CLOSE
### Response:
(Severity: 6), (Category: SECURITY), (Description: This is an info message from debug module of aaa component. This indicates that user has succesfully logged out.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-RX_CH_HI_PWR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high power on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption from received cells.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-6-PRINT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB EA, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGMP_MTRACE-3-INIT_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Initialization error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_INHERIT_ON
### Response:
(Severity: 6), (Category: L2), (Description: The specified BFD session is now inheriting BFD state from another BFD session.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-WC_LICENSE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to get license status from license manager due to an internal license software error. The error message describes the error.), (Recommended Action: Please try to recover by reloading the line card which generated the error. If it doesn't resolve the issue, please try to gather the output of the CLI before reloading the LC. 'show tech-support ethernet interfaces', 'admin show license tech-support', 'admin show tech smartlic' 'admin show license trace platform' And if the issue persists, contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-6-CBC_REFRESH_PWR_SEQ
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CBC has detected there there is a CRC check failure in the power sequencers on this card and attempting to reprogram the sequencers in error.), (Recommended Action: Verify the status of the power sequencer programming using: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env trace pwrseq<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env trace pwrseq<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-REPLACE_UNSUPPORTED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Satellites using an older software version cannot perform replace operations initiated by this host software version. The satellite should be upgradeD to use the same software version as the host. If this is not possible then the transfer / activate / update / deactivate / remove operations may be used to provide the same functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-SRGB_FREE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while attempting to free the segment-routing global block (SRGB) If this error occurs because of configuring or deconfiguring the global block, then segment-routing will not functional at all. As a result, likely cause of this problem is that some other application (e.g. LDP, BGP) are using labels within the global block), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-3-MATCH_TYPE_IN_ACL_NOT_SUPP_AFMON
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Only the following match types specified in an ACL are supported as part of an AFmon policy: Source/ Destination IP address, Source/ Destination Port values. An ACE containing any other match types will be ignored i.e. it will not be programmed in hardware.), (Recommended Action: No further action is required if the policy programming behavior, which is explained here, is acceptable. Otherwise the policy can be removed and an acceptable one re-applied. 'no service-policy <policy-name> input|output')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_AIB
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error communicating with the AIB server. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the AIB server, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_CONNECT-3-MEMORY
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Connection library has failed to acquire the required amount of memory), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Ingressq encountered a fatal memory allocation error. If a new configuration being applied, the configuration will be rejected. The user may reapply the configuration. If the error happens normal operation, the process will restart to recover from this error.), (Recommended Action: The driver/client processes try to recover from this error. If any discrepancies are found in the device functionality, contact TAC Support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP best path selection process?
### Response:
The BGP best path selection process is used to determine the best path to a destination when multiple paths exist. The process evaluates paths based on attributes like weight, local preference, AS path length, origin, MED, etc. in a defined order until a single best path is chosen.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-IM_RATE_UPD_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred when the ANCP process tried to publish rate updates through the interface manager. One of the most probable reason for the error is that Interface Manager process is not available or is restarting at the time of the operation. ANCP will attempt to recover by retrying the update in question.), (Recommended Action: The process will attempt to recover from this situation by retrying. If this message is not seen again and if rate is getting updated after sometime (few tens of seconds), then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-DISCOVERY_FAILED
### Response:
(Severity: 6), (Category: INFRA), (Description: Failed to get config file location from the DHCP server. Will retry with different fetcher.), (Recommended Action: Verify DHCP server connectivity and configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CVAC-4-CONFIG_START
### Response:
(Severity: 4), (Category: MGBL), (Description: The CVAC (Cisco Virtual Appliance Configuration) subsystem is proceeding to read and apply router configuration from the specified file. More information can be found in the provided file or CLI command.), (Recommended Action: Informational message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_MRT-7-DEBUG_INIT_EVENT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-6-FILEOPEN_FAIL
### Response:
(Severity: 6), (Category: SYSDB), (Description: Operation to open the SysDB log file has failed.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-INIT_NON_FATAL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A non-fatal failure occurred during the initialization of the specified module of RSPP MA, the process responsible for managing the diversion of packets to services such as firewalls. This will typically mean that some level of debugging support will not be provided for the process (e.g. error codes will not be decoded), but the functioning of the process is not otherwise affected. Restarting the process should restore full debugging support.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-INVALID_PLIM_PORT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT was supplied with a plim port that exceeds the limit of num ports.), (Recommended Action: Collect console log and the following information and contact TAC support with this info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -debug netio drivers location <loc> -show netio trace all location <loc>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option loose feature?
### Response:
The MPLS TE path-option loose feature allows an explicit path to be specified using a combination of strict and loose hops. Strict hops must be directly connected to the previous hop, while loose hops are not required to be directly connected. Loose hops provide more flexibility in the path calculation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-FC_IN_RESET_STATE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: One Fan controller is put in IN-RESET. System is running simplex with single FC. If other FC also goes down, then the chassis will be shut.), (Recommended Action: Replace the FC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-DB_DELETE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: A user requested that an object be removed from a database in which it was not present. The process should recover from this event, but it may indicate an internal inconsistency which could cause other problems.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_DMA_MEM_ALLOC_MISMATCH
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected mismatch in DMA allocation address of the switch. When this occur switch won't be initialized properly. In order to recover, the ESD process resets the switch, then exits so that it is restarted by the process manager.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure OSPF on Cisco IOS XR?
### Response:
To configure OSPF, use the 'router ospf' command in global configuration mode. RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)#router ospf 100
RP/0/RSP0/CPU0:router(config-ospf)#area 0
RP/0/RSP0/CPU0:router(config-ospf-ar)#interface GigabitEthernet0/0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_5_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-CLIENT_INIT_LTRACE_FAILED
### Response:
(Severity: 5), (Category: OS), (Description: 'Ltrace utility registration failed.' 'Ltrace functionality may not work properly.' 'IMDR will proceed without fail.'), (Recommended Action: 'Restarting the process may resolve the issue.' 'If the problem persists after some tries, contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET_LOOPBACK-3-IM_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize IM connection in the platform Ethernet loopback component), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-OUT_OF_EVENT_LOOP
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'While waiting for events from AIB. Reached Out of event loop .' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB-3-DEBUG_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-SYMBOL_NOT_FOUND
### Response:
(Severity: 3), (Category: OS), (Description: A dll notified from a client is not found This leads to failure in coalesce functionality of OBFL.), (Recommended Action: Please restart the obflmgr process. If the issue is seen even after restart then please collect the following data and contact support. collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-OPTICS_EDC_SERDES_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Serdes signal fault detected/cleared between optics and EDC.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-LOG_MTU
### Response:
(Severity: 4), (Category: IP), (Description: The link MTU is lesser than the IPv6 link MTU. Hence the operational MTU is set to the link MTU and not the configures MTU value), (Recommended Action: Choose IPv6 MTU value lesser than the LINK MTU value)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-SHUTDOWN
### Response:
(Severity: 3), (Category: OS), (Description: An NRS Server hit an error from which it could not recover and is restarting to continue normal operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NODE_KERNEL_DUMP_EVENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the specified node is doing a kernel dump. This can happen in case of a failure that leads to the node software deciding to do a kernel core dump and then reset the node.), (Recommended Action: Please collect the following information and then contact your Cisco technical support team. - the kernel core files from the RSP harddisk)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TORNADO_ARBITER-3-FABRIC_ARB_TRANSIENT_LINK_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition where the arbiter driver encountered transient fabric link fault and attempted to bring the link up.), (Recommended Action: This message may indicate a condition where the arbiter driver encountered transient fabric link fault and attempted to bring the link up by toggling the serdes and MAC level RX. If the message is seen continuously when the card is in IOS XR RUN state then please contact tech-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_REG_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering with stats infra failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-LC_EOBC_FAILED_RSP0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This line card has lost EOBC heartbeat to RSP0.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CRYPTOMAP-3-DBG_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An debug init/fractL call failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-WARNING
### Response:
(Severity: 7), (Category: HA), (Description: This provides information about non-error conditions which may even be expected under certain circumstances. Nevertheless, these are not considered 'desirable' conditions.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-6-SYSDB_BLOCK_RECOVER
### Response:
(Severity: 6), (Category: OS), (Description: SSM process detects sysdb becomes available. It will register with sysdb to read new configurations.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-INVALID_BOARD_CLASS
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver cannot handle the detected CCC board classification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-GET
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the object to fetch does not exist. The details are in the error string.), (Recommended Action: Check that the requested object exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-5-SESSION_CLEAR
### Response:
(Severity: 5), (Category: MGBL), (Description: This message indicates that the session specified in the message had been cleared via CLI 'clear configuration session <seesion_ID>'.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-INVALID_OBJECT_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to allocate memory for RIB operations probably out of memory because of huge configuration or a memory leak.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_0_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-5-THRESHOLD_REACHED
### Response:
(Severity: 5), (Category: L2), (Description: The threshold value set has been reached. Max number of allowed groups will soon be reached. considering reconfiguring max group limit or loose some states.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTQ2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-3-ERR_FBP_CFG
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabricq received an invalid Fabric Back Pressure configuration from fsdb.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_ISSU_UNREG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while trying to un_register for ISSU notifications.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option dynamic attributes feature?
### Response:
The MPLS TE path-option dynamic attributes feature allows certain LSP attributes to be specified for a path-option without configuring an explicit path. LSP attributes that can be specified include bandwidth, priority, affinity, and setup and hold priorities. This provides a way to influence the dynamic path calculation with additional constraints.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-ERR_PLIM_SERVICES_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in initialization of PLIM Services driver. If this occurred during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: Restart the plim_services process (process restart plim_services location <>) If the issue persists, do a cold reboot Services PLIM MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-BADHRCHY
### Response:
(Severity: 7), (Category: MGBL), (Description: An invalid hierarchy was entered by the user.), (Recommended Action: Use the 'children' command to progressively find out the correct hierarchy string. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-3-SEEK_TLV_OFF_FAILED
### Response:
(Severity: 3), (Category: MEDIA), (Description: Function write_tlv_in_offset write the TLV data which is being pointed by region offset. This function used to for writing NVRAM TLV from XR. Set the offset position in the nvram file and write the reboot history record. Fseek failed for the provided offset for that nvram bin file. Refer the reason why it is failed.), (Recommended Action: Based on the failed reason, please take steps. Listing few actions, erase nvram-raw: loc <loc> may solve the issue. If erase doesn't help, please contact the TAC team for further help.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-SIA_EVAL_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: Your evaluation period has expired. Register the device with Cisco. Software upgrades will be blocked once the SIA grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Customer should register the device to Cisco.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNA-2-ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Error in RUNA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_ON_ABORT_NO_RELOAD_ISM
### Response:
(Severity: 6), (Category: INSTALL), (Description: When initiating the ISSU operation, the user specified the on-abort no-reload option. This message indicates that on abort, no recovery will be done by ISSUMgr. The user has indicated 'on-abort no-reload' hence, no abort actions will be performed as part of abort. This is a non-error condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_THREAD_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver failed to create the identified thread during driver initialization.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_LIB-3-LTRACE_NODE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to open the directory path for ltrace. %s-Directory Path. %s-Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-DB_CLEAR_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered when attempting to clear the DB. DB might be in any state now & so usage of hat DB might fail with unexpected results.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Also, restarting the acctd DB process might help recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-3-MIXED_MODE_FC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Fabric running in mixed-mode. Please upgrade/downgrade all FCs to same type of Fabric Card.), (Recommended Action: Fabric running in mixed-mode. Please upgrade/downgrade all FCs to same type of Fabric Card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-SHUTDOWN_STANDBY_RP
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This msg means that shelfmgr is shutting down RP/SC as its a user initiated shutdown.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP route reflector clusters in IOS XR?
### Response:
BGP route reflector clusters in IOS XR are configured to allow a set of route reflectors to act as a single entity. router bgp 65000
neighbor 192.0.2.3
route-reflector-client
cluster-id 1
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-6-CONNECTION_DENY_ACL_ERROR
### Response:
(Severity: 6), (Category: MGBL), (Description: TTY management denied the requested connection due to ACL mismatch. Please check the configuration for applied ACL.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-6-TRIGGER_SO
### Response:
(Severity: 6), (Category: ROUTING), (Description: If NSR switch-over is configured, active ldp will trigger the switch over in case of TCP failure or LDP failure, if NSR is ready and an install operation is not in progress.), (Recommended Action: This message is for information purpose only. Analysis should be done if switch-over is not expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-3-FO_NOT_INITIATED
### Response:
(Severity: 3), (Category: IP), (Description: TCP's NSR module is trying to initiate a fail-over to maintain NSR, but either all NSR clients are not yet ready or NSR clients with the highest weight are not yet ready. So, a failover will not be attempted.), (Recommended Action: Check which NSR client was not ready and if required collect relevant logs for that process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-2-REBOOT
### Response:
(Severity: 2), (Category: OS), (Description: A critical process ran into trouble.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_SERVER-3-GN2412_CHIP_RECOVERY_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to recover the chip. Card will be reloaded.), (Recommended Action: The RP on which the fault has occurred will reload automatically to attempt recovery.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO_COMMON-3-HA_PMW_CONN_REG_RETRIES
### Response:
(Severity: 3), (Category: L2), (Description: ELO has failed to connect and register with the Process Manager Infrastructure after multiple retries. Reconnection and registration will continue to be retried at a slow rate. If ELO fails to connect with Process Manager, it will not be notified of the ISSU switchover, and may result in unexpected behaviour.), (Recommended Action: Check the status of the Process Manager process for any obvious errors. Unless ELO can reconnect to Process Manager, it will not be notified of the ISSU switchover, and so the ISSU operation will likely need to be aborted and retried. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-6-ERR_IFH
### Response:
(Severity: 6), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
B_SHIM_PARTNER-3-SET_CALLBACK_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is a software error when trying to set call-back to IM.'), (Recommended Action: Check if IM is working fine or not by executing CLI 'sh process ifmgr location <>'. Try performing IM process restart by executing CLI 'process restart ifmgr location <>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-6-BACKUP_DSC_NOTIFICATION
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates DSC sending backup notification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the planes into which the IOS XR architecture is logically divided?
### Response:
The IOS XR architecture is logically divided into a management plane, control plane, and data plane. The management plane provides CLI, XML, and SNMP based configuration and monitoring. The control plane runs routing protocols, signaling protocols, and other control functions. The data plane performs packet forwarding in hardware.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-AAA_LOCK
### Response:
(Severity: 6), (Category: MGMT), (Description: This is expected when aaa database is locked by some other program, retrying to configure to user would not give this message), (Recommended Action: Retrying to configure to user would not give this message and allow user to configure first user, if issue persists then collect show aaa trace login location <location>/show aaa trace sync location <location>, the work-around would restart configuration database)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-1-ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The PCIe server has detected an error condition. The message has the error information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-5-OIR_INSERTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-LPTS_POLICY_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some socket/lpts error occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of T1E1.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-LRD_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-ADJ_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K adjiacency module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log and following traces: show cef trace loc <slot number> show cef platform trace [common|ipv4] all loc <slot number> show adjacency hardware trace loc <slot number> show bundle trace all loc <slot number> show im trace loc <slot number> Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-4-BDL_LB_INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified library was initializing.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-CARD_UNPOWERED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that requested node cannot be powered up because its in admin-config power-disabled state.), (Recommended Action: Remove node's power-disable config via CLI and then try again: (admin-config)#no hw-module power disable loc <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAPS-6-POOL_BLK_DONE
### Response:
(Severity: 6), (Category: IP), (Description: All Ip addresses belongs to the blocked pool is now release. This range in now available to be asinged to a new pool.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-0-SOFT_ERROR_RELOAD_RECOVERY
### Response:
(Severity: 0), (Category: FABRIC), (Description: Soft error detected on FIA instance. Card will be reloaded to cover from this error.), (Recommended Action: Soft error are very rare due to Cosmic and other environmental factors. The probability of soft error on same device again is extremely low. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_DEBUG
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the debug service. The error message describes what operation has failed and why it failed. The error could be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SERVICE_EA-3-ERR_UIDB_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to set up connection with UIDB server process.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-1-BOARD_FPGA_NOT_ACCESSIBLE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Detected Sarva FPGA is not accessible while polling the prsent bit.), (Recommended Action: power-on reload SC-GE-22-B card. consider RMA SC-GE-22-B card if issue persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_QFPCPUCTRL-1-ERP_PAR_ERROR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: CPU controller FPGA detected a parity error on the SPAQFPBridgeCtrl0 ERP bus during data reception from SPAQFPBridgeCtrl0.), (Recommended Action: Reboot the board. If the problem persists, replace the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-ETHSERVER_WRITE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and Ethernet server. The MBI operation in progress will not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering auto-tunnel backup feature?
### Response:
The MPLS traffic engineering auto-tunnel backup feature allows point-to-point backup tunnels to be created dynamically to protect MPLS TE tunnels and the IGP against link and node failures. Backup tunnels are created for neighboring routers and provide fast reroute protection. It is enabled with the mpls traffic-eng auto-tunnel backup command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_DUPLIATE_INSTANCE_ID_ON_INTERFACE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Multiple isis instances with same instance-id enabled on an interface.), (Recommended Action: Make sure no two isis instances with same instance id can be configured on an interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-SYSMGR_RESPAWN_COUNT
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: System Admin Manager failed to get respawn count from sysmgr.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-NBR_DOMAIN_CERT_REVOKED
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'The domain certificate of the neighbor device ' 'has been revoked'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_EA-3-INIT
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: Initialization process such as getting an evm failed. The acct_ea process cannot proceed without this module initialization, and will exit.), (Recommended Action: sysmgr will retry to start the acct_ea process. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-5-ROUTE_TRUNCATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: A FIB prefix links to a load-balance that has been truncated. This means that paths that the control plane has identified as equal-cost, are not being used for forwarding. This occurs when the linecard that has emitted this error does not have the capabilities to support this many ECMP paths. This is indicative of one of two conditions: 1 - the route producer (i.e. OSPF, BGP, etc) has been configured to provide more equal-cost paths than all linecards in the system can support. In this case all line cards will be emitting this error. This will not result in traffic loss as all linecards will truncate the load-balance in the same way, and will thus all have identical forwarding programmed. This will NOT result in any traffic loss. 2 - Only this linecard has insufficent capabilities to support a load-balance of this number of paths. In this case all traffic to this prefix through this linecard (ingress or egress) will blackhole), (Recommended Action: reduce the maximum number of equal-cost paths generated by the route producer to a value that all cards in the system support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-6-LOAD_LICENSE_FILE_OK
### Response:
(Severity: 6), (Category: LICENSE), (Description: The license manager has installed all the licenses in the named license file to the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWTIMERERROR
### Response:
(Severity: 3), (Category: OS), (Description: Couldn't manipulate OS timer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PDMA SPP dll Memory Allocation Error message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn spp process, up to a fixed number of times the error is encountered, to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_BMADJ-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM BMADJ, error information), (Recommended Action: Please collect the console log, bundle traces (show bundle trace loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-7-SYSMGR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An error occurred while the Install infrastructure was interacting with System Manager, and so the requested operation may not be completed.), (Recommended Action: Some processes did not complete the software change in time. Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-FAULT_SIMULATION_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Simulation of fault condition requested was not perfomed due to failure.), (Recommended Action: No all fault simulation are supported on all the card types. Please select the right fault simulation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLCTRLR-4-UPDOWN
### Response:
(Severity: 4), (Category: L2), (Description: The specified MLCTRLR is operationally down due to alarm. Check alarm status using show controller Mlt command on the cli.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_SHOW_PROCESS-7-LTRACE
### Response:
(Severity: 7), (Category: HA), (Description: ltrace_init failed), (Recommended Action: Collect system log information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-XGXS_DTE_SYNC_ERROR_RECOVERED
### Response:
(Severity: 2), (Category: L2), (Description: The PLA MAC xgxs DTE layer went down due to loss of sync or lane alignment. The traffic may start getting dropped after this error message.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-SSC_SEND
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a batch of messages to the Service Director. The Service Director may not be up to date with the state of services on this node, so SESVI interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the SESVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOS_PORTT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-3-ISM_COULDNOT_REGISTER_NOTIFY_SHELFMGR
### Response:
(Severity: 3), (Category: INSTALL), (Description: Retry registration fixed number of times. ISM could not register for node state notify with shelfmgr.), (Recommended Action: Please contact TAC after trying maximum retries.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-DLL_MANAGER_SETUP_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The attempt to setup the rpl remote dll coordinator failed. This will prevent the rpl coordinator from running and may prevent route policy from executing.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICCP-5-NEIGHBOR_STATE
### Response:
(Severity: 5), (Category: INFRA), (Description: An ICCP neighbor has changed state (up/down).), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_1_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-3-MIPC_UNCORR_ERR_NOTIF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TLU received notification from MIPC due to unrecoverable error or invalid address. client downloads the entire table to hardware as a recovery mechanism. This is an informational message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-3-MISC_DISK1_NOT_FOUND
### Response:
(Severity: 3), (Category: INFRA), (Description: Install agent process is spawned but /misc/disk1 directory do not exists on this node. /misc/disk1 is mandatory to execute this process.), (Recommended Action: The reason for this failure has to be analyzed. Collect the show tech logs by running 'show tech-support install', 'show tech-support os' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMONMIB-3-ERR_MUTEX
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble locking/unlocking mutex.), (Recommended Action: Please collect 'show tech-support performance-traffic' and contact Cisco technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-EVENT_BLOCK_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is typically an internal error in the software. The software failed to initialize the code that handles/processes events related to tunnel_ea.), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea. If the problem persists, copy the error message as it appears on the console and any noticeable side effects. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIER-2-PCIE_2_ROOT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCIE error detected in Root Complex 2), (Recommended Action: Please correct the problem by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-4-_OOR_YELLOW
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a severe error message in the OFA module to indicate high usage of OFA resources.), (Recommended Action: Please collect the OFA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBQSMGR-3-SEND_ABORT_FAILED
### Response:
(Severity: 3), (Category: INSTALL), (Description: The communications channel to QSU Manager is unavailable.), (Recommended Action: The process is automatically restarted, which should trigger a QSU abort - the QSU may be attempted again at this point. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the log-adjacency-changes command in IS-IS?
### Response:
The log-adjacency-changes command is used to enable logging of IS-IS adjacency state changes. When enabled, the router logs messages when an adjacency comes up or goes down. This is useful for monitoring the stability of IS-IS adjacencies and for troubleshooting adjacency problems.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-BIND_MTD_SOCKET_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Bind mtd to socket failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAIPC_NETIO-7-BASE_CONTROL_FUNC_ERR
### Response:
(Severity: 7), (Category: OS), (Description: qnetbase_control_func() wrongly called.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_THREAD_DESTROY
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to destroy a thread. This is an internal error. If the error occurred whilst unconfiguring IS-IS then it may be necessary to forcefully terminate the IS-IS process. If the error occurred during normal operation then it may be necessary to restart the IS-IS process to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-3-BIND_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to bind, this may be program level issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a user with privilege level?
### Response:
To configure a user with a specific privilege level, use the 'username' command in global configuration mode. RP/0/RP0/CPU0:router(config)#username admin privilege 15 secret 0 admin1234
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-INIT_ERROR_INSUFFICIENT_DISKSPACE
### Response:
(Severity: 3), (Category: INSTALL), (Description: Disk does not have sufficient space for insthelper to continue on. The difference from 'INSUFFICIENT_DISKSPACE' is node is not being held in MBI.), (Recommended Action: Please remove unwanted files/directories and retry the operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-6-FW_MGR_OPERATION_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: These messages indicate some kind of info related to the auto FPD upgrade process when it runs in the context of the install upgrade.), (Recommended Action: No action is needed from the user. This is to inform the user about certain details on the FPD process. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-4-ERR_MGD_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: MFR MA encountered an unexpected error using the Managed Timer library. This is most likely due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the MFR MA process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of BGP route dampening?
### Response:
Route dampening minimizes the propagation of flapping routes across an internetwork. Criteria can be defined to identify poorly behaved routes which are suppressed. Dampening parameters include a penalty value, a suppression limit, a reuse limit, and a maximum suppress time.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-PM_REPORT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in raising alarm to Fault Manager. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-6-SHOW_CONFIG
### Response:
(Severity: 6), (Category: OS), (Description: Print socket configuration.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-PROTO_REG_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPFv3 was unable to register for support of the show protocol command.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-6-ROOT_DEVICE_BUS_INFO_THRESHOLD_EXCEEDED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A root device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV-4-show_timeout
### Response:
(Severity: 4), (Category: ROUTING), (Description: It was not possible to obtain the lock required to access the databases. This may be due to the main thread being very busy processing events.), (Recommended Action: Wait a few minutes, and re-attempt to issue the show command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_TS_UPDATE_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Timestamp update error on NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ temperature greater than or equal to the high temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_LA_QOS-2-MIN_VOQ_VSC_VALUE_NEEDS_UPDATE
### Response:
(Severity: 2), (Category: QOS), (Description: SDK suggested minimum allocatable VOQ/VSC is different than being used in XR), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-BRM_ERR_RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: Error detected in Input barrier from FQM), (Recommended Action: If the error persists, please contact TAC suppport.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_PLIM_SB-3-MSG_REPLY_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: A message to the specified SPA did not receive a reply. The reason for the failure is specified in the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-ASSERT
### Response:
(Severity: 4), (Category: IP), (Description: 'LISP control plane code execution encountered an unexpected condition.'), (Recommended Action: 'If LISP process dies, it will attempt to recover from this situation by ' 'restarting.' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_SYSDB_UNPACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EES-4-ENOSPACE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: EES warning message.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the max-link-metric command in IS-IS?
### Response:
The max-link-metric command is used to configure the maximum link metric that IS-IS will advertise. By default, IS-IS advertises the actual link cost. However, in some scenarios, you may want to advertise a link as unreachable without actually shutting down the link. Setting the max-link-metric to a high value (up to 16777214 for wide metrics) effectively makes the link appear unreachable to other routers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET0_INTR_SOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET0_INTR_SOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-7-INCORRECT_CBP_ACCESS_COUNT
### Response:
(Severity: 7), (Category: OS), (Description: CBP access count records the number of threads accessing the CBP. Access count shall be greater than 0 when it is to be descreased), (Recommended Action: Collect show tech-support gsp and process restart client if client has any group communication issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAL_IPHC-3-EA_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: IPHC pal ea error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE6_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE6_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CARD_VOLTAGE_ALARM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The card voltage sensor has been monitored below or above it's operational range. If the voltage continues to fall or rise, the HW power sequencer may reset the board.), (Recommended Action: Verify the failure, give CLI: (admin)# show env table --> voltage sensor threshold ranges (admin)# show env --> all sensor output (exec)# show env led details Specifically look at voltage sensor values, can refine the output by giving show env volt)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-FILESYS_BASIC_FAILURE
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostic test for basic file system devices such as disk0, disk1, harddisk respectively has detected an error condition, if the devices are not present or having some access issues.), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCDMA-3-ERR_DLL_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl driver tried to register for a dll but it encountered an error. The driver might lose some of its functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_INTF_DELETED
### Response:
(Severity: 4), (Category: OS), (Description: An interface that was previously flagged by the punt flow trap has been deleted, and so the 'penalty box' for it has been cleared.), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-IDB_SEARCH
### Response:
(Severity: 3), (Category: L2), (Description: The message indicates that an exact match on the interface handle was not found.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-HA_PP_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HA Punt path test failed, reloading ISM.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMS-4-DUPLICATE_ENTRY
### Response:
(Severity: 4), (Category: L2), (Description: When reloading the list of known nodes from checkpoint, a duplicate entry was encountered. This is unexpected, and likely indicates a software fault, but is otherwise harmless. The duplicate entry has been removed and the process should continue to operate as expected.), (Recommended Action: This message is usually harmless and the system will recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-4-PARSER_DLL
### Response:
(Severity: 4), (Category: ROUTING), (Description: A system call failed inside the routing policy parser DLL.), (Recommended Action: Try again: the failure might have been due to resource issues. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-6-COMPLETE_SYNC
### Response:
(Severity: 6), (Category: MGBL), (Description: Sync successfully completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_ASYNC_ATTACH
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_CONN
### Response:
(Severity: 4), (Category: IP), (Description: The connection from ARP to the specified service has failed and cannot be recovered. In this situation ARP restarts and this should resolve the problem.), (Recommended Action: Please collect the output of show tech-support arp. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCTL-3-gsp_msg_failed
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The internal communication channel among pctl threads is broken.), (Recommended Action: If issue still persists, collect 'show tech-support gsp'. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-4-CONFIG_NEXTHOP_ETHER_INTERFACE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The static route via ethernet interface without nexthop is configured. This may cause come inconsistancy.), (Recommended Action: Refer to the configuration guidelines for static route nexthop interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JBI-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message from the altera JTAG player), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_PON_RESET
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and need a power on reset.), (Recommended Action: An error has happen and PON reset has been performed to recover. Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINEPROTO-5-DAMPENING
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The interface line protocol dampening state changed. When the state is 'suppressed' the interface will be held down. In 'unsuppressed' state, link state changes are allowed to occur as normal.), (Recommended Action: If the dampening state change was unexpected, confirm the configuration settings for the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_RX_FBP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabricq ASIC is configured to expect fabric backpressure informtion for a particular set of groups on a small set of links. This error indicates that incoming backpressure information doesn't match the expected config.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-EVENTBLOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while a thread was blocked waiting for an event. *RECUR*), (Recommended Action: Please provide output from the following commands: - show tech-support routing ospfv3 detail - show configuration failed - show configuration history 5 - show commit changes <last 5>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-4-IPACCESSRLIMIT
### Response:
(Severity: 4), (Category: ACL), (Description: The ACL library has requested the operating system to grant additional heap memory. The request has failed and the error indicating the reason has been given), (Recommended Action: Collect the requested show tech-support info and forward it to development engineering team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-7-IM_CALLBACK_ERR
### Response:
(Severity: 7), (Category: L2), (Description: 'There is a software error when handling messages from IM.'), (Recommended Action: Ignore)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-RX_LOS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-CLIENT_ID_WARNING
### Response:
(Severity: 6), (Category: INFRA), (Description: Use of exr-config for Client ID and user-class of DHCP options is deprecated. They will be completely removed in a future release.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_LIB_ACCESS-3-MSG_SEND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and server. The MBI operation in progress will not be carried out. However, the MBI client will continue trying to send the message to the server. In the event that the operation continues failing, then the card could be rebooted by the RSP.), (Recommended Action: No action is needed if the card boots up and reaches IOS XR RUN state. If the card can not reach IOS XR RUN state despite getting rebooted and the errors persist please collect the following information and contact your Cisco technical support representative: 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-TX_ALARM_SC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised by BITS transmitter when internal short-circuit resistance is approx 25 ohms or less.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CISCOPROCESSMIB-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble allocating memory for process name'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT_HDR_EXT_FIFO_OFLOW_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt hdr ext fifo overflow on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_EDM-6-BAGREG_FAILED
### Response:
(Severity: 6), (Category: IP), (Description: The ipv4_io process failed while attempting to register the indicated external data manager data blocks with SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp igp sync delay' command in IOS XR?
### Response:
The 'mpls ldp igp sync delay' command is used to configure a delay time for LDP-IGP synchronization. This delay is the amount of time LDP waits after an interface comes up before informing IGP that LDP is fully operational on that interface. This delay allows time for LDP to establish sessions and exchange labels before IGP starts using the link for forwarding.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-POOL_APPLY_FAILURE
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected error occurred when process was trying to apply vty-pool configuration. Process will abort to take process core file then restart to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR* *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-TOP_SHMEM_USERS_INFO
### Response:
(Severity: 6), (Category: HA), (Description: This message is emitted when system memory usage crosses a threshold in the direction of increasing memory exhaustion. The top shared memory users will follow in the next messages. There may be a memory leak or misconfiguration.), (Recommended Action: Collect the data from the following messages and attempt to determine what is driving memory usage. Forward the messages to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-ERR_DBG_REGISTER_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization of the ospf_uv process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-5-PEER_SEND_MSG
### Response:
(Severity: 5), (Category: OS), (Description: An PCE peer is either down or does not exist. Thus, the intended operation cannot be completed for this peer.), (Recommended Action: Check the state of the channel to the peer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-FATAL_ERROR_CAPI_LEVM
### Response:
(Severity: 3), (Category: INFRA), (Description: A fatal error occurred in CAPI communication. The main levm exited unexpectedly. Note the reason for the error.), (Recommended Action: Root cause of the error needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-CHIP_RESET_NOT_ALLOWED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detects an invalid Reset action defined in the Application Fault Condition Database. An fault of severity Error is not allowed to perform a chip reset recovery action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng path-selection metric' command in IOS XR?
### Response:
The 'mpls traffic-eng path-selection metric' command is used to specify the metric type to use for MPLS TE tunnel path calculation. The options are IGP metric (the default), TE metric, or a combination of both. The TE metric is a user-defined metric that can be used to represent factors other than the IGP metric, such as link bandwidth or delay.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAL_IPHC-6-EA_INFO
### Response:
(Severity: 6), (Category: L2), (Description: IPHC pal ea informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_SCRUB_THRESH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: ASIC errors have occured and need memory scrubbing, such errors have crossed threshold.), (Recommended Action: Errors have been handled.Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IF_UV-3-INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred during the initialization of the process. This may result in the restart of the process. The failure could be one of the following: - Event Manager - Debug Library - LWM bind Module - Sysdb verification registration - Data Storage Module - Detach pulse handler), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_BMADJ-3-ERROR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM BMADJ, error), (Recommended Action: Please collect the console log, bundle traces (show bundle trace loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_CHKPT_INSERT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq encountered an error during Checkpoint Insert.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-XIF_GTFF1_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected XIF GTFF1 memory multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MCAST_PAGE_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multicast page error on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-AUTH
### Response:
(Severity: 3), (Category: MGBL), (Description: Authentication related error occured or returned unexpected results.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_CHKPT_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB was unable to setup the checkpointing facility to offer high availability functionality. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-INTERNAL
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed with internal software error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-MAX_LSA_THR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Threshold for maximum number of non self-generated LSAs has been reached), (Recommended Action: Check if some router in the network is generating large number of LSAs as a result of misconfiguration)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-BFD_SESSION_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to create a session with the BFD server. Retry mechanism will preriodically try to create session.), (Recommended Action: This failure may be due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CHECKPOINT_NOT_INITIALIZED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Sync-controller is the software component which controls the synchronization devices in the system. Checkpointing is a mechanism to update the redundant RSP with the current configuration and status of the system to help takeover in case of a failover. The checkpoint mechanism needs to be initialized for Sync-controller to update the standby RSP with current frequency syncronization status. This failure could be because of memory allocation failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-7-EXTERNAL_USB_DEVICE_REMOVED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: platform umass media device removal is called when it detects the a device inserted in the external USB port. Inform mediasvr about External USB removal.), (Recommended Action: Debug message only. No action is required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-SYSMGR_NODE_STATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Sysmgr returned a failover from a node state query.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-FAILED_TO_GET_SYSCLK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manger unable to sync to system clock. Shelf manager resets all per Hour/day threshold counters and valid time stamps.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-FREE
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-CANNOT_RUN_HBLOSS_SCRIPT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This may be a problem with lack of resources. The heartbeat loss log won't get collected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-ERR_NO_ENCODER_DECODER
### Response:
(Severity: 3), (Category: ROUTING), (Description: EIGRP could not find an encoder/decoder to be used to transmit EIGRP packets except HELLOs. EIGRP adjacency may flap if this issue is seen long enough to exhaust the maximum number of retransmissions.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between OSPF interface types - broadcast, point-to-point, and point-to-multipoint?
### Response:
Broadcast interfaces (e.g., Ethernet) can reach multiple OSPF neighbors and elect a DR and BDR. Point-to-point interfaces have a single neighbor and do not elect DR or BDR. Point-to-multipoint interfaces are a collection of point-to-point interfaces on a non-broadcast network (like Frame Relay). They treat each neighbor as a separate interface and do not elect DR or BDR.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-AD9554_EEPROM_DOWNLOAD_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AD9554 D2 clock eeprom download failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_2_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge domain MTU?
### Response:
To configure the MTU for an L2VPN bridge domain, use the 'mtu' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
mtu 1500
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_IPC-3-SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal software error has occurred for the SIM IPC.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: L2), (Description: BFD Agent encountered a Sysdb communication failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective MSC reboot.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_app-3-INIT
### Response:
(Severity: 3), (Category: INFRA), (Description: A failure occurred during the initialization of the process. This may have resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-LL_CFG
### Response:
(Severity: 3), (Category: IP), (Description: This might result in failure generating linklocal address on certain LC.), (Recommended Action: Restarting ipv6_ma may fix this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CPP_LPTS_EA_REGISTER
### Response:
(Severity: 3), (Category: OS), (Description: An internal cpp_lpts_ea_register function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-SUBMODESTRING
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The end mark is missing in the submode string. The submode is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-6-DEVICE_FORMAT_COMPLETED
### Response:
(Severity: 6), (Category: MEDIA), (Description: The media storage card specified was requested to format and was formatted. See log file for specific reason.), (Recommended Action: Media storage data should be recovered from either active card or current primary mirroring device. If not redundant card or no mirroring then reinstall software and configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_IPC-3-BIND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error occurs due to the failure while binding the system database.), (Recommended Action: Please collect the console log and CLI output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-DB_DISK_FAILURE
### Response:
(Severity: 4), (Category: MGBL), (Description: Configuration manager failed to create the set of directories comprising the CFS repository under the cfs root directory. This renders the system practically unusable. The potential problems could range from no space on disk to a flawed disk.), (Recommended Action: Make sure there's enough space on disk; or if the storage media is flawed then replace it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-DEVCTL_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: devctl error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_MGR-3-LOOP_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The SVII Adjacency Manager encountered an error while waiting for an event. This should not ordinarily happen, but may indicate a temporary glitch that will automatically recover. If it occurs very frequently it may be necessary to restart the SVII Adjacency Manager process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_lite-3-ERR_SHMEM_UNAVAILABLE
### Response:
(Severity: 3), (Category: L2), (Description: PPP MA has requested transfer of more interface records than shared memory can accommodate), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-UPDATE_INTF_BW_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: QoSEA encountered errors while updating the interface bandwidth of an interface in response to a bandwidth notification from IM.), (Recommended Action: If the errors are due to HW programming issues, a process restart of QoSEA process would enable QoSEA to re-attempt the programming of QoS hardware resources. If the errors are due to incompatible configuration (say, a failed QoS policy with regard to the current interface bandwdith), remove/add of the failed QoS configurations would address this error condition 'no policy-map <policy-name>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_SC_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised by BITS transmitter when internal short-circuit resistance is approx 25 ohms or less.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMS-3-MSG_DROPPED
### Response:
(Severity: 3), (Category: L2), (Description: An incoming control message could not be fully processed. The node ID corresponding to the sender of this message could not be established. The error message string may provide further information as to the nature of the problem.), (Recommended Action: If the error message suggests a GSP error, this is a sign of a wider problem with inter-node communcation on the device - seek assistance with debugging gsp and communication issues. Gathering 'show tech-support gsp' may assist your TAC engineer with diagnosis. If the error appears transient, restarting the process which emitted this error message should result in a full resync of all data. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPPHA-3-NOCDM
### Response:
(Severity: 3), (Category: L2), (Description: A CPP HA has detected that CDM is not running.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QUEUE-7-LINKED
### Response:
(Severity: 7), (Category: OS), (Description: The router is running short on memory.), (Recommended Action: It may be necessary to free some memory by exiting a program. If this message recurs, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_EA_SHOW-7-USAGE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Startup option supplied to HFR_PM_SHOW is not valid.), (Recommended Action: Please re-enter the correct option as described in the usage message 'Usage: intf_ea_show [-I <intf name>] | [-N <node name>]' Example: sh controllers intf_ea int Ten0/2/0/0 loc 0/2/cpu0,)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-3-NVSATOFF_QERR
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred when internally queueing the nV Satellite multicast offload channel events. Multicast offload will not function correctly. Remote nV satellite multicast offload states will be out of sync with the nV Host.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error verbose<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error verbose<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show nv satellite status<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show nv satellite status<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-SYNC_TIMER_TIMEOUT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered when any of the member racks was not in stable state before the Sync timer timeout.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-CFG_SIZE_LOW
### Response:
(Severity: 7), (Category: SYSDB), (Description: The message to the user to indicate that the requested config size excceds the low end of the system memory limits), (Recommended Action: *RECURR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP signaling for an L2VPN?
### Response:
To configure LDP signaling for an L2VPN, use the 'mpls ldp' command in global configuration mode and specify the interface. mpls ldp
interface GigabitEthernet0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-6-ENFORCE_OVERAGE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled in overage condition.), (Recommended Action: The customer may consider to purchase more licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-5-SEU_CORR_NON_ESSEN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Single event upset correction non-essential error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-4-INTR_ENABLE_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: Hardware state is not correct.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-SVI_OOR
### Response:
(Severity: 6), (Category: ROUTING), (Description: L3 EM Table OOR during l3if creation event), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_AGENT-4-INVALID_DESCENDANT
### Response:
(Severity: 4), (Category: INFRA), (Description: Features are organized in a tree, and the identified features do not meet relationship requirement. This is an internal software error, and as a consequence, feature capability information may not be available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_CERR_REGISTER_DLL
### Response:
(Severity: 3), (Category: OS), (Description: The call register the dll using cerr_register_dll failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-4-ADD_SLICE
### Response:
(Severity: 4), (Category: OS), (Description: The PA failed to assign an IFIB slice.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_MAIN-5-CLOCK_ACCURACY_ENHANCED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The system timing is switching to enhanced accuracy mode as a result of applying the 'timing-accuracy enhanced' configuration. This switching operation may result in a transient flap in timing (PTP/SyncE) or in the PLL states. This is an expected behaviour and no further action is needed from the user.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_3_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlea-4-NODE_MAC_ENTRY_LIMIT_HIT
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN EA process added an underlying member to an interface, and as a result of this, passed the node level limit for MAC accounting entries. No more entries will be accepted on this node until some of the existing entries are cleared. It is also possible that some existing MAC accounting entries may not be correctly programmed on all members.), (Recommended Action: As this message indicates a resource limit has been hit, it can potentially be alleviated by removing a bundle member or reducing the number of layer 2 peer devices. A support request should only be raised if the cause for this message is not apparent. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP bias greater than or equal to the high bias alarm threshold. The CFP is the pluggable optics on the line cards. The bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-CONSUMER_RCV_BUF
### Response:
(Severity: 3), (Category: MGBL), (Description: The consumer finds one or more invalid fields in the buffer received from the producer.Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-GST_SYNC_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: GST Sync error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-PROC_CNT_NORMAL
### Response:
(Severity: 3), (Category: HA), (Description: When number of processes are below MINOR Threshold Percentage), (Recommended Action: Not required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-IDT_XFORM_COMPLETED
### Response:
(Severity: 7), (Category: HA), (Description: --), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-PROFILE_INACTIVE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A memory resource profile has been configured for the system using '(admin-config)#hw-module profile <>'. However, this profile has not been activated on the line card that originated the warning message. Use '#show hw-module profile <> location X/Y/cpu0' to see what profiles are currently active on the line card.), (Recommended Action: Either the line card that originated the warning message must be reloaded in order to activate the configured memory resource profile on that card or the entire system must be reloaded. Consult the warning message for instructions.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-7-ERR_SYSMGR
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID-DB server failed in sysmgr API), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INCOMPATIBLE_LC_FOR_CHASSIS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This LC type is not supported in this chassis type for the ASR9K family of chassis as it is incompatible to the chassis hardware architecture for traffic carrying purposes. Shelf manager raises this alarm when it detects the presence of the incompatible LC and clears the alarm when the LC is no longer seen as being present.), (Recommended Action: Please remove this LC from the chassis and replace it with another LC type which is supported in the chassis according to the Cisco user documentation. If you have questions, please contact your Cisco technical representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBDLLMGR-4-UNEXPECTED_MAGIC
### Response:
(Severity: 4), (Category: OS), (Description: An unexpected magic number encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp update-delay' command in IOS XR BGP configuration?
### Response:
The 'bgp update-delay' command is used to configure the maximum time that BGP will delay sending updates to neighbors after the BGP process starts. By default, when the BGP process starts, it immediately sends out updates to all neighbors. In a large network, this can result in a significant amount of processing on the neighbors. The update delay allows the BGP process to stagger the sending of updates, reducing the processing load on the neighbors.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_CORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory correctable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An attempt to initialize a component failed. The error message describes the error, provides an error code and a string interpretation of the error code.), (Recommended Action: Please try to recover by doing the process restart of the process that generated the error. If that fails, please try to reload line card using CLI 'hw-mod loc <> reload'. If the issue persists, collect console log and the following information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces - show tech-support location <> file <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-6-SIGNAL
### Response:
(Severity: 6), (Category: OS), (Description: Signal handler information is displayed), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-INVALID_IP
### Response:
(Severity: 7), (Category: SERVICES), (Description: The ip address is invalid.), (Recommended Action: Please configure proper valid IP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-DAEMON_ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while using the process event manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-RX_ALARM_AIS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected AIS defect for incoming signal. AIS is usually an unframed all-ones signal. For T1 mode AIS is declared when the BITS receiver detects four or fewer zeroes in a 3ms period. For E1 mode AIS is declared when the BITS receiver detects fewer than three zeroes in two E1 frames.), (Recommended Action: 1) Ensure framing format on port matches framing format on the line. 2) Trace and check the source of AIS signal. Possibly an incorrect internal configuration in the service provider equipment, or a failure in their upstream connections.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-NT_SWO_REDUNDANCY_NOT_READY
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver instance attempted to start a protocol thread which monitors its peer process's health on the adjacent SC. The protocol thread exchanges protocol packets with its peer via scratch registers on the PCIe switch. A write and subsequent read attempts to the PCIe switch scratch registers have failed, which prevent the protocol thread from starting. As a result the Switch Card redundancy can't be supported at this time. The Ethernet Switch Driver will continue to try this operation and when the write/read/Verify operation succeeds, the protocol thread will start and Ethernet Switch Card redundancy will be available at that time.), (Recommended Action: Check if the ESD instance on the peer SC card has exited or crashed. Reload of the Switch Card may be required to recover from this condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_READ_CONF_REG
### Response:
(Severity: 7), (Category: MGBL), (Description: Reading value of RTC config register.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-ALLOCFAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Allocation of the specified resource failed, probably due to low memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FSMTIMEOUT_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is not able to boot up), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_NPMB-3-NETWORK_START_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: This failure encountered when the network start of packet couldnot be obtained.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-3-MTU_UNUSABLE
### Response:
(Severity: 3), (Category: L2), (Description: PPP has been informed that the lower-layer MTU has been set to a value smaller than the PPP header size, which makes it impossible for PPP to operate.), (Recommended Action: Reconfigure the interface's MTU to a larger value. In order to ensure correct operation with peers, values which provide a layer 2 payload capacity (after allowing for 4 bytes of PPP header) of 1500 bytes or greater are required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MLACP_INVALID_PRIORITY_REQUEST
### Response:
(Severity: 6), (Category: L2), (Description: An mLACP peer device has requested that the priority of the specified member be changed. This is currently an invalid operation due to the reason specified. If the message indicates that the priority request has been ignored, then the peer will be notified that the priority change has not been made.), (Recommended Action: Check that the configuration of all the mLACP peer devices is consistent.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_1_OFLOW_NPU2BR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-1 NPU to bridge instance-2 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-5-SYSCALL
### Response:
(Severity: 5), (Category: INFRA), (Description: A system call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_LQ_FULL_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 1 LQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-RELIABILITY_INVALID_REPORT_TYPE
### Response:
(Severity: 4), (Category: L2), (Description: The report type of the message received was inappropriate relative to the interface's protocol state. For example, receiving an 'E-LMI Check' while processing a 'Full' STATUS report. This indicates that the last PDU sent to the peer device was not received.), (Recommended Action: Check that E-LMI is configured on the peer device and that the link to the peer device is functionining correctly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_L2TP-7-DEBUG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB L2TP component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SYSDB_APPLY
### Response:
(Severity: 4), (Category: OS), (Description: Error in apply handler. This will impact the dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. admin show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-SIGNAL_UPDATE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The Frequency Synchronization manager that generated the message failed to update its database, either in response to a message received from a remote Frequency Synchronization manager on another node, or after a change to the selected inputs in another selection point on this node. This is most likely due to an out-of-resource condition. The corresponding frequency signal will not be used.), (Recommended Action: Resolve the underlying resource issue, then restart the Frequency Synchronization manager on the affected node using the following command: process restart fsyncmgr location <node>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-RSI
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external event manager function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-FPD_FPGA_LOAD_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: One of more FPGAs on the RSP has failed to load the latest image.), (Recommended Action: Upgrade FPDs using upgrade hw-module FPD command. Reset the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-4-PORT_NOT_FOUND
### Response:
(Severity: 4), (Category: L2), (Description: A 'port available' notification was received by the POS Interface driver from the G-POS library for a port that is not known about.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-EVENT_BLOCK
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when block waiting for Event Manager events.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_AGORA_ALM_TYPE_ONE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: AGORA type one alarm.), (Recommended Action: If the problem persists, call your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL-3-ERR_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failure to create an OBFL record. This may indicate a problem with the OBFL storage device.), (Recommended Action: Ensure that the OBFL storage device is available and properly formatted. To format the OBFL storage device, use the 'format' command as specified in the 'File System Commands' section of the ASR9k User's Guide.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_PKT_MINLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LIC_MGR-6-EVENT_ERR
### Response:
(Severity: 6), (Category: OS), (Description: An error has occured in attempting to handle an event sent to the IOS XRv license manager. The event has been ignored.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different ways to filter BGP routes on IOS?
### Response:
BGP routes can be filtered on IOS using\n- AS path access lists to filter based on AS path\n- Distribute lists to filter based on prefix\n- Prefix lists to filter based on prefix\n- Route maps to apply complex filtering logic\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-AD9554_ACCESS_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AD9554 access failure/success.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-EA_RETRY_FAILED
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The Tunnel-IP EA has failed to program a tunnel interface after 1 or more retries.), (Recommended Action: Shut and no shut the tunnel interface. If the problem persists, remove and re-configure the tunnel interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-INSTALL_FORCE_OP_FAILURE_RELOAD
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install replace commit has failed during activation due to which system is being reloaded to auto-recover.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-7-INIT_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: NetIO process has problem initializing its database and attempts to restart in an attempt to recover from the error.), (Recommended Action: The process attempts to restart on detecting this failure, in an effort to recover from the failure. If after restart things recover, then nothing more needs to be done. If the error is seen when the system is low on system resources, once the system resource like memory, cpu go back to normal state, the process should succeed in coming back up. If the process fails to recover and repeatedly exits then the ios message will have the details of what part of initialization failed and the reason for it, for further action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-2-SVC_CRIT
### Response:
(Severity: 2), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-TRANSFER_DONE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package transfer requested on this satellite has completed. Run 'show nv satellite status' for more information.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-PROCESS_OPTIONS_INIT_FAILURE
### Response:
(Severity: 4), (Category: OS), (Description: Dumper failed to initialize process core options database.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_IM
### Response:
(Severity: 3), (Category: ROUTING), (Description: Interface Manager returned an error during a tunnel interface operation. The system internal tunnel status might now be inconsistent which might prevent the tunnel from coming up or traffic flowing over this tunnel to be dropped.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. 1. To determine if the system is in an inconsistent state following this error, verify the TE tunnel is present in: configuration, TE and Interface Manager: -show run interface tunnel-te <n> -show mpls traffic-eng tunnels <n> -show interfaces tunnel-te <n> If the tunnel is present in some of these commands but not in others, the system is in an inconsistent state. 2. Collect: -show configuration commit failed -show logging -show tech-support mpls traffic-eng -show tech-support pfi for further analysis of the issue. 3. The te_control process may be restarted in order attempt recovery from this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AHCI-2-DEV_HD0_NOT_RESPONDING
### Response:
(Severity: 2), (Category: PLATFORM), (Description: SATA HD0 device not responding), (Recommended Action: Please attempt the following: If dual RSP, and the problem is on the active RSP, issue 'redundancy switchover' If the problem is on the standby/simplex RSP: Restart low level ahci driver via ksh, 'process restart devb-ahci' Failing which, Reload RSP If problem persists, SATA HD0 devices have to be replaced If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-4-OPERATION_QS_ABORT_DONE
### Response:
(Severity: 4), (Category: INSTALL), (Description: The Quickstart has successfully executed its abort procedure and will hold on to the new instances until told otherwise for triage purposes.), (Recommended Action: The system has been held following an operation abort to allow system level triage. When complete, issue command <cmdBold>install activate fast cleanup<cmdBold> to clean the system up and make it ready for another fast upgrade.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-HW_DETECTED_ERROR_PORT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver HW error interrupt handler was invoked and found a port with valid isn error registers.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_3_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_RESTORE_DATA
### Response:
(Severity: 3), (Category: OS), (Description: nrs_chm_chkpt_create_data failed while restoring the data handles from the chkpt shared memory after nrs server process restarts.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-3-PTFM_MAX_INTF_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Interflex Manager failed to get max number of interfaces from platform at startup. The process will be automatically restarted, if it keeps restarting with same message *DDTS*), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_TX_FIFO_OFLOW_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-0 reported tx fifo overflow on bridge instance - 1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-4-CLIENT_ERROR
### Response:
(Severity: 4), (Category: INSTALL), (Description: A client of the Install infrastructure unexpectedly returned an error during processing, and so the requested operation may not be completed.), (Recommended Action: One of the local nodes returned an error for an install verify request. Please check the state of all the nodes and retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TTI_MISMATCH_DEMA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSHD-3-ERR_AUTH
### Response:
(Severity: 3), (Category: IP), (Description: Kerberos authentication failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INVALID_UNPROV_MSG
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service unprovision message was received, however, the data it contained could not be interpreted.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation followed by deactivation and then unprovision of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-ROUTE_UPDATE_UNSUPP_PROTECTION
### Response:
(Severity: 3), (Category: ROUTING), (Description: In deployments in which Remote LFA FRR is not supported or in which a specific flavour of protection is not supported, IGP should not be computing such primary/remote-backup path.), (Recommended Action: Debug respective IGP generating the route update and fix the topology/configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_USAGE
### Response:
(Severity: 7), (Category: OS), (Description: usage error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-MALLOC_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-GSP_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EES-6-PROC_RESTART
### Response:
(Severity: 6), (Category: PLATFORM), (Description: EES communication channel got stuck process self restart to recover from the condition.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_MPLS_EA-3-ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA MPLS-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MVRP-4-L2VPN_FLUSH
### Response:
(Severity: 4), (Category: L2), (Description: The MVRP IO process has failed to initiate VLAN ID flush with L2VPN after five seconds of retrying. Further retries will be attempted every 3 seconds. Until the flush succeeds the currently registered VLAN IDs may be inconsistent.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-MIB_INDEX_CHKPT_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while checkpointing Frequency Synchronization MIB indices. Frequency Synchronziation SNMP data may be inconsistent over Frequency Synchronization process restart or ISSU.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_SDFEC_LOF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_SIS-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Service Interface Server encountered a fatal error and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-LOCK
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-BADCLASS
### Response:
(Severity: 4), (Category: MGBL), (Description: An invalid class name was entered either by itself or as part of a hierarchy string.), (Recommended Action: Use the classinfo command to get more information about available class names. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_PLATFORM_IFNAME_PARSE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error using a platform API to parse the interface name. The error message describes what operation has failed and why it failed. The error is most likely caused by a programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-RACK_DOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This indicates that either the rack is powerdown/shutdown or there is some problem with control ethernet cables or switches between the racks.), (Recommended Action: If the rack is not powerdown or shutdown by the operator, then check the control ethernet connectivity between racks. (Check if the cables are okay and also if the switch is operating normally). Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-GROUP_NOTIFY
### Response:
(Severity: 3), (Category: OS), (Description: Unable to set group notify for PLACEMENT_GSP_GROUP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-BUNDLE_INVALID_PIPELINE
### Response:
(Severity: 3), (Category: L2), (Description: Unable to add bundle interface to logical switch with specific pipeline id.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-STARTTRANS
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the timeout time was not correctly entered. The details are in the error string.), (Recommended Action: Check that the format of the timeout time is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-EG_FBU_POOL_EMPTY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects EG_FBU_POOL_EMPTY and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HORSE-2-ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Error in HORSE operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_CRP-3-INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: autorp_candidate_rp failed to initialize successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_candidate_rp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_candidate_rp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_candidate_rp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_candidate_rp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-MESSAGE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error occurs,if the provided source or destination ip address is invalid.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>), show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-OBJ_LEN
### Response:
(Severity: 7), (Category: HA), (Description: An object save or get operation is being done with the wrong length buffer. This points to a logical bug in the client application.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the preferred method for upgrading an IOS XR router to a new release?
### Response:
The preferred method for upgrading an IOS XR router to a new release is using the mini.pie file, rather than TURBOBOOT. This involves the least amount of service interruption. The upgrade is performed using the 'install add' and 'install activate' commands in admin mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_EVM_INIT_EVENT
### Response:
(Severity: 7), (Category: HA), (Description: The event_init_event function reported an error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-3-ERR_FDI_CLIENT_REG
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID BCDL Consumer was unable to register with the FDI client. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-UPGRADE_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The indicated FPD upgrade is not supported on this platform due to the reason displayed by the platform error message.), (Recommended Action: Follow the platform message to enable the FPD upgrade on this platform)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKSTAT-3-TOOSMALL_BUFFER
### Response:
(Severity: 3), (Category: SNMP), (Description: The buffer size is insufficient to accommodate the header for the bulk data file. The header contains the schema definitions of all the configured schemas.), (Recommended Action: Increase the maximum buffer size using the <CmdBold>buffer-size<NoCmdBold> size-of-buffer command, where size-of-buffer is the increased buffer size.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESDMA-6-ESD_CONN_LOST
### Response:
(Severity: 6), (Category: INFRA), (Description: ESD on the given location has restarted or stoped. Hence connection between ESD and ESDMA has been lost.), (Recommended Action: Check on the esd process in the given location)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-EVENT
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an error using the Event Manager library. The error message describes what operation has failed and why it failed. The most likely reason for this is a low memory resources or programming error.), (Recommended Action: Consider restarting the ELMI process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-6-INFO_MSG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is a informational message in the NP Driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-ACQUIRE_LOCK_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to acquire shared memory lock.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-2-MANDATORY_REBOOT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: prm_server process respawn is not supported, hence reboot node if prm_server respawned/crashed), (Recommended Action: Reboot the Node if it hasn't rebooted on its own, otherwise no action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-AD9554_PLL_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AD9554 PLL loss of lock detected/cleared), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_EA-3-LINK_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error occurred while attempting to join together the two halves of some VASI pairs on the specified node. The pairs will not come up. If there is a standby node configured for the pairs, they may come up on the standby.), (Recommended Action: It may help to shut down, then bring up, the VASI interface pairs in question.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-WAITPID_RM
### Response:
(Severity: 3), (Category: MGBL), (Description: waitpid for the 'rm' process failed. Configuration removal thread terminated incorrectly.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PFI-3-INFRA_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This error is an internal infra error and when critical is handled accordingly in the code. The context of the error is provided in the actual code where this error is used. Some of the error conditions that are encountered under this is bind failure, attr query failure, set/get failures, etc. If this error is seen persistently initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-4-LINK_BURST_INTERVAL_STRETCHING_ACTIVE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The requested PPS of interface sessions is more than can be supported. The configured burst interval will be increased to ensure probe packets sent per second do not exceed the maximum allowed PPS. The LINK_BURST_INTVL_STRECTHING_INACTIVE syslog will be issued once this condition is cleared.), (Recommended Action: Configure a larger Interface delay measurement burst interval.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-DSC_CHANGE_EVENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER-3-BDL_IIR_OP_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The ethernet driver failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the Ether basecaps is out of step with the bundle configuration.), (Recommended Action: Restart the ether_caps_partner process in an attempt to recover, or if this fails, detach and re-attach the physical member interface that the error was reported on by unconfiguring and reconfiguring the bundle member id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-LC_POWER_NOT_READY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC power not ready.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_HDR_FIFO_OFLOW_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg hdr fifo overflow on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_PKT_LEN_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 1 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-4-OIR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: 'The power-module has either been pulled/inserted.'), (Recommended Action: 'Verify if the power-module has been plugged/removed.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV4_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-NO_REDISTMETRIC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Metric is not configured during redistribution.), (Recommended Action: Configure the metric needed for redistribution using default-metric or route policies.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-ASIC_TEMP_NOT_VALID
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_MPLS_EA-3-ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX MPLS-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-6-ENFORCE_OVERAGE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled in overage condition.), (Recommended Action: The customer may consider to purchase more licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-6-ACCESS_DENIED
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-CFP_INFO
### Response:
(Severity: 4), (Category: L2), (Description: An issue is detected during operation on Optic interface module. %d - port number. %s - description of the operation. %s - description of the issue. %s - reason for the issue), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RVM_MGR-3-LVM_CREATE_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: LVM create failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_CLEAR_FSTATS
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Plane Statistics CLI encountered an error in trying to clear the fabric plane statistics as a result of sysdb call failure. This software error will cause the following fabric plane statistics getting appended to the previous ones. No other system functionality will get affected due to this.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-IDT_PLL_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IDT Rx PLL loss of lock and loss of signal interrupt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-NULL_SHIM_INFO
### Response:
(Severity: 3), (Category: L2), (Description: Null shim info encountered for given interface handle), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-UNABLE_TO_START_USB_MEDIASVR_THREAD
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Start disk space monitoring for nodes which need. This notice message will get printed when it unable to start mediasvr thread.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_DESTROY
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods destroy error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of virtual links in OSPF?
### Response:
Virtual links are used to connect an area that does not have a direct physical connection to the backbone (Area 0). The virtual link provides a logical path to the backbone through another area. This is commonly used if a new area is introduced that cannot have a direct link to the backbone. The virtual link is configured on the Area Border Routers (ABRs) on both ends of the link.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-3-INIT
### Response:
(Severity: 3), (Category: LICENSE), (Description: The license manager encountered a error condition while initializing. The condition where the error occur is failure in setting up event Handler of eventing IPC , other is failure in adopting the Role state of Dsc or non-Dsc. The restart of licmgr or node reload should likely resolve the issue.), (Recommended Action: Please restart the licmgr process command 'admin process restart licmgr'. Another option is reloading the RP card by command 'admin reload'. If the error log message is reoccuring , please collect informaiton using the commands 'show tech-support license ','show license trace platform' and contact your tech support representative and provide them the collected information and exact message as displayed on screen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-ESMC_SEND_TIMER
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred when attempting to re-arm the ESMC SSM send timer. No further SSMs will be sent from interfaces on the card on which this message was seen.), (Recommended Action: Restarting fsyncmgr on the card on which this message was seen may fix the problem. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_DRIVER-2-HW_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Driver HW error interrupt occurs, it will cause HW reset.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-EVAL_EXPIRED
### Response:
(Severity: 3), (Category: LICENSE), (Description: Your evaluation period has expired. Please obtain a new idToken from the Smart Agent Portal and re-register the device.), (Recommended Action: Customer needs to obtain a new ID token from the smart agent portal and re-register the device with the Cisco licensing service.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-5-OFFLINE_NOTICE
### Response:
(Severity: 5), (Category: L2), (Description: An attempt has been made to temporarily change the operaional status of the SPA from online to offline before the image for the FPD could be updated on the target SPA. For some SPA types, this operation is required.), (Recommended Action: Ensure that you have redirected the traffic of the target SPA before performing this action, since the target SPA will require a power cycle operation after the image update for the FPD on the target SPA has been performed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Embedded Packet Capture (EPC) feature in Cisco IOS XR?
### Response:
The Embedded Packet Capture (EPC) feature in Cisco IOS XR allows capturing packets that are received or sent on an interface. It helps in troubleshooting network issues by analyzing the captured packets.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialization of trace functionality for exec shell failed. This would affect the debugging of exec shell.), (Recommended Action: Try logging out and login again. If the message appears again, copy and save the message. Collect show logging output and any other suspicious error messages on console and inform technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_BMADJ-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM BMADJ, error), (Recommended Action: Please collect the console log, bundle traces (show bundle trace loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-4-WARNING_FIPS
### Response:
(Severity: 4), (Category: SECURITY), (Description: The sshd encountered a warning condition.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_9_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_SDFEC_OOM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPPIF-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A run time error occurred during the lc idb operation on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-SHMEM_MUNMAP_FAIL
### Response:
(Severity: 3), (Category: L3), (Description: A failure has occured in unmapping a shared memory region required for communication between the IPv6 Neighbor Discovery (ND) process (ipv6_nd) and the ND spoofing process (ipv6nd_lite). This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart.), (Recommended Action: Check that the ipv6nd_lite process is running and restart it if necessary. Look for other error messages that may help explain the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR1_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-1 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-CHASSIS_IDPROM_READ
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was not able to retrieve a valid chassis IDPROM image from backplane. This failure will prevent applications that requires a valid chassis serial number from operating correctly.), (Recommended Action: Perform RP fail over to see if the other RP has the same problem. If problem persist, try to power-cycle the chassis to recover from the failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Serial-3-MTU_IMPOSE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The specified MTU could not be applied on this interface.), (Recommended Action: User should choose a more apporpriate MTU value which is neither too small nor too large for any configured protocol.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CGM_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal cgm_init function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
YANG-6-INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-5-ROLE_MASTER
### Response:
(Severity: 5), (Category: SUBSCRIBER), (Description: The SRG role from the concerned group has change to MASTER from either SLAVE or uninitialized role. This is a normal redundancy event.), (Recommended Action: None required if there has been any network event or administrative action that caused this redundancy role change. Subscriber status may be checked on the master and slave routers to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-INVALID_ARGS
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Internal error. Function was passed an Invalid Parameter.), (Recommended Action: please check if the process is blocked using 'show process blocked'. Then restart the lpts_fm. If the problem still exists, copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-3-MALLOC
### Response:
(Severity: 3), (Category: OS), (Description: An attempt to allocate meory failed.), (Recommended Action: Please check there are no memory leaks using the following commands: - show memory compare start - show memory compare end - show memory compare report)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_MCAST-3-ERR_LINECARD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error occurred in MPLS which involves forwarding for mpls p2mp packets.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, and collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BIOS_FPD-3-BACKUP_BIOS_LOADED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The Backup BIOS images on BIOS SPI Flash has been loaded on the indicated card. The output of 'show hw-module fpd' will show the affected images with BACK IMG state. This can happens when Primary BIOS Flash is corrupted, so it fallback to load the backup image set to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for BIOS to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-SHUTDOWN_START
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unrecoverable error detected on the Network Processor, NP shutdown started), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-4-ERR_OPER
### Response:
(Severity: 4), (Category: MGBL), (Description: IPSLA operation module has failed to perform an operation.), (Recommended Action: See the message text for details of failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGEDM-3-FAILEDREGEXEC
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Regular expression match failed with the reason mentioned in the message. This may lead to wrong 'show config failed' listing.'), (Recommended Action: Please contact TAC with the output of the following commands: - console logs - show version - show process nvgen_server - show nvgen trace ascii-backup reverse - show configuration history If the error recurs frequently, it may be possible to rectify it by restarting 'nvgen_server' process. But please collect the logs mentioned above, before restarting the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-MANDATORY_REBOOT_OVERRIDE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-CANBUS_READ_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PRM was not able to read memory characteristics via canbus.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-ERR_MEM_ALLOC
### Response:
(Severity: 2), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition. BGP may not operate correctly until the process is restarted.), (Recommended Action: Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-5-SVC_NOTICE
### Response:
(Severity: 5), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-6-UNKNOWN_NODE_VLAN_LIMIT
### Response:
(Severity: 6), (Category: L2), (Description: A failure occurred while trying to determine the maximum number of VLAN sub-interfaces that can be supported on the given node. The system may allow configuration of more VLAN sub-interfaces that can be supported, or may not allow the full number supported to be configured.), (Recommended Action: After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with <CmdBold>proc restart vlan_ma location [location]<noCmdBold>. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-3-ERR_BAG_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: IGP failed to register its bag files with the bag library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR6
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_RD_IDS
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods destroy error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-MIPC_NOTIF_ACK
### Response:
(Severity: 4), (Category: OS), (Description: It is an internal error which the system failed to acknowledge a MIPC Server notification.When this issue happens, it will trigger an automatic restart of pifibm_server_lc process.), (Recommended Action: Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-ACTIVE_LSP_SWITCH
### Response:
(Severity: 5), (Category: ROUTING), (Description: The Active LSP on the specified tunnel interface has changed.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status' \ ' switch-over' interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_1_FIA_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error from FIA for NPU-1 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-SYSDB_BIND_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some error occured in sysdb bind operation bind. The text of the message displays the failed operation for the bindpoint with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_LIB-4-CLOCK_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The infrastructure is behaving incorrectly. This will not affect the operation of the MBI infrastructure, but messages and logs may not contain timestamps.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-OUT_OF_MEMORY
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: IM was unable to allocate the memory it needed - indicating the system is in a very low-memory condition, which should be recovered by wdsysmon automatically. IM will exit and restart in an effort to help clear the low memory condition), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_NOT_SUPP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, feature not supported), (Recommended Action: This error is expected since the feature or the scale being configured is not supported. If you believe there is still some problem, please collect FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show version', 'show platform' and 'show console logging' output. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-TSP_GST_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSP GST timeout.), (Recommended Action: Minor error, no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_RMDIR
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not remove a required directory, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PUNT link has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-UNKNOWN_ASIC_INDEX
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The asic index is unknown, this may be a program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_TOO_MANY_PATHS
### Response:
(Severity: 3), (Category: ROUTING), (Description: The maximum allowed number of next-hop paths for a single destination prefix has been exceeded. One or more paths have not been installed in the RIB, and should be removed from the running configuration.), (Recommended Action: Excess next-hop paths should be removed from the running configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-MDR_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_CORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory correctable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-SYSDBREG
### Response:
(Severity: 4), (Category: LICENSE), (Description: An error occurred when registering with the system database), (Recommended Action: please restart the licmgr process command 'admin process restart licmgr'. If the problem is still not resolved , please collect informaiton using the commands 'show tech-support license ','show license trace platform' and contact your tech support representative and provide them the collected information and exact message as displayed on screen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_SVR-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: The process acct_svr encountered a software error while initializing. The process is exiting and will be restarted. System will not be affected.), (Recommended Action: show accounting trace location X/X/X)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM_EA-2-INTERNAL_MSG
### Response:
(Severity: 2), (Category: L2), (Description: An internal error occurred in VCM_EA while executing one of the following operations: - Capsulation addition - Capsulation removal - Virtual Circuit Interface creation - Interface Manager operation), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_MEM_ALLOC_ARM_IDB
### Response:
(Severity: 3), (Category: ROUTING), (Description: These are unexpected errors), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SUSPENSION_STOP_REQUEST_RECEIVED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-CREATE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to to create device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_14
### Response:
(Severity: 3), (Category: IP), (Description: Binding corresponding to the received PBU does not exist. A PBU with HI value as specified in the error message expects a binding to be present.), (Recommended Action: Ignore this error message if it occurs only a few times. If the error persists, then do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-6-TIMER_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The specified timer failed to start.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-EXIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-2-PLATFORM_ERROR
### Response:
(Severity: 2), (Category: LICENSE), (Description: Smart Licensing Agent has encountered a Platform Problem. The Platform Development Team needs to be contacted to get this problem addressed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-1-ERR_HW_ERR_THRESHOLD_RELOAD
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error reached threshold on the Datapath FPGA. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause linecard reload. Device: %s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error.), (Recommended Action: If the message recurs, diagnostics should be executed on the PLIM and MSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_7_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-FSDB_FAB_UNKNOWN
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SKYWARP_NETIO_LIB-4-GET_MYNODEID_FAIL
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Unable to determine my node id using platform api.), (Recommended Action: Please capture show proc ouput and show logging output - 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-NOPACKET
### Response:
(Severity: 3), (Category: IP), (Description: Most likely a resource problem within the system.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-ROUTE_UPDATE_FAIL
### Response:
(Severity: 5), (Category: ROUTING), (Description: Was not able to commit at least one route after retrying for the maximum number of times. In this case, mfwd will restart in an attempt to recover. This is not an error. It just indicates that mfwd is restarting to recover from possible stale route problem.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-6-REPLY_ERR_SEND
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LMRIB_API-3-RPC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An RPC-related error occurred in an RPC call from the LMRIB API. This indicates a problem in client table registration or unregistration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging | inc err<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging | inc err<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-7-DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a debug message in the CGV6 SERVICES PROCESS to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: 'show logging' to confirm errors)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_0_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-7-WARM_RLD_OK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Card seems warm reloaded successfully), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCONBKUP-7-INTERNAL_ERR
### Response:
(Severity: 7), (Category: MGBL), (Description: Error encountered while Backing up the ASCII System Configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-TREE_UNLOCK_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while unlocking a mutex), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-6-STATUS_SET_INFO
### Response:
(Severity: 6), (Category: OS), (Description: This is during the device Initialization. Failure to set the status file to indicate Qnet is not yet ready %s- qnet name %d- Error code %s- Error description), (Recommended Action: Informational)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKPLATFORM-3-CONNECTFAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The platform driver was not able to connect to the packet server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-LACP_PKT_DELAYED
### Response:
(Severity: 5), (Category: L2), (Description: The received partner sequence number is too far behind the last sent actor sequence number. This indicates either that one or more LACPDUs sent to the partner device have been dropped, or there is a long delay on the partner device in processing the LACPDUs.), (Recommended Action: This message indicates one of two possibilities. Either LACPDUs sent by this device have been dropped before delivery on the partner, or the partner device is unable to process incoming LACPDUs in a timely fashion. Check packet counters on both devices for drops, and for rate limited LACPDUs on the partner device (using <CmdBold>show lacp counters<noCmdBold> if it is an XR device). Check also for high CPU load on the partner device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-CHDIR_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_VRF-3-INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the BGP VRF module. The BPM process will be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_5_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-4-ERR_CHKPT
### Response:
(Severity: 4), (Category: L2), (Description: MFR MA encountered an error using the Checkpoint Service. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-6-IPACCESSLOGP
### Response:
(Severity: 6), (Category: ACL), (Description: These messages are issued whenever access lists are configured with the 'log' option and matches with the IP protocol type TCP (or) UDP (or) SCTP. This message is seen for the first match and for each match after the hit count is greater than 0x7FFFFFFF(2147483647).), (Recommended Action: This is information only message, no action required No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-LFA_FRR_BKUP_INCOMPLETE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A backup of the listed protected interface is found incomplete. This can cause potential traffic loss during FRR.), (Recommended Action: Make sure that the bkup interface is ARP complete before FRR.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_ATOM-3-LTRACE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB ATOM component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_WRONG_BLOB_TYPE
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-3-IO_COMM_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The software is not able to communicate with the power-module. This may have an impact on the router's available power budget, as the software cannot determine the power-module capacity in this state. This condition should be resolved prior adding additional FRU to the router.), (Recommended Action: This may be a transient condition, as the software will continue to try to establish communications with the power-module. If this condition does not clear on it's own, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-3-DEBUGINITFAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error occurred during packet debug events initilization. Refer to the error message for the particular cause.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-INFO_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> show cef platform services trace common all reverse loc <ISM> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_OVF_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA11 Tx overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rewrite-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-6-ENFORCE_METERED_USAGE
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing is enabled with post-paid billing method.), (Recommended Action: 'INFO')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-MRID_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-CBC_ALRM_PWR_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power fault alarm indication received from CBC. This may be a serious failure and card will not come up. Try Hard OIR the card and check card is coming up or not. If still card is not booting then RMA is needed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-FAB0_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected fabric parity from RP/RSP.), (Recommended Action: If all other LCs also report this parity error alongwith peer RP/RSP, then check for any bent pins on the RP/RSP for which the problem is reported. Reload the RP/RSP that has the problem. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_MGT_CV_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 MGT code violation on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to setup event manager.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE* Or try restarting manually. Get the job id from 'show processes afmon_ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_ALARM-3-STORM_CONTROL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Storm control policer allocation has failed on at least one bridge port.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-6-NO_NEIGHBORS
### Response:
(Severity: 6), (Category: L2), (Description: The UDLD session on the interface has started or been reset, and has not found any neighbor devices. UDLD protection is not in place until communications with a peer device have been re-established.), (Recommended Action: Enable UDLD on the peer device to protect the link using UDLD.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-MUTEX_UNLOCK
### Response:
(Severity: 3), (Category: OS), (Description: Failed to unlock the mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_9_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-MINMSGLENGTH
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The message length must be greater than minimum message length. The minimum message length varies by request code.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-MYADDR_DB_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-2-CRITICAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Critical error during improper updation of variables or incorrect return state in MPLS FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-5-UNKNOWN_CHASSIS
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Unrecognized chassis type hence it reboots.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_PON_FLOW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates a fault with the NP HBM memory. Displays the error associated with the power on operation.), (Recommended Action: The line card needs to be returned for repair.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-ASPATH_TOO_LONG
### Response:
(Severity: 4), (Category: ROUTING), (Description: This message indicates that the UPDATE message contains AS_PATH or AS4_PATH attribute that is too long. Such long ASPATHs could be the result of an error on the neighbor and are not found in normal updates. The received UPDATE message is subject to 'treat-as-withdraw' behavior i.e. the associated NLRIs are withdrawn.), (Recommended Action: Check the UPDATE messages received from the neighbor.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-GET_PROVIDERS_REPORT
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not get a required providers report, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLU-4-PROFILE_INACTIVE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A memory resource profile has been configured for the system using '(admin-config)#hw-module profile <>'. However, this profile has not been activated on the line card that originated the warning message. Use '#show hw-module profile <> location X/Y/cpu0' to see what profiles are currently active on the line card.), (Recommended Action: Either the line card that originated the warning message must be reloaded in order to activate the configured memory resource profile on that card or the entire system must be reloaded. Consult the warning message for instructions.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_LIB-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when registering debug.), (Recommended Action: This is not a critical error and it can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-EXTRANET_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: A warning occurred in MRIB MVPN EXTRANET operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_EA-3-NOT_FOUND
### Response:
(Severity: 3), (Category: SERVICES), (Description: The SBCSVI EA process received a request to process an interface that does not exist in its database. This indicates some sort of internal inconsistency.), (Recommended Action: It may help to restart the SBCSVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_STR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error information related to rate limitor in platform FIB), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_PKT_TOO_SHORT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet too short error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-2-ERR_MUTEX_UNLOCK
### Response:
(Severity: 2), (Category: FABRIC), (Description: The FIA driver cannot unlock the mutex after accessing the link, because of which it cannot configure the qlink ASIC on ASIC/channel errors or enabling the channels if the mutex is not working.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_12IN1-1-DCE_INVALID_CLOCKRATE
### Response:
(Severity: 1), (Category: L2), (Description: The configured DCE transmit clock rate exceeds the range supported by the hardware for the installed cable type. This can not typically be validated at configuration time as the cable may not yet be installed or detected by the hardware. Max supported clock rates based on the cable type are: RS-530, RS-530A, RS-449, V.35: 8064000 bps X.21: 2016000 bps RS-232: 128000 bps The DCE clock rate will be reduced to the max rate supported by the hardware.), (Recommended Action: Reduce the configured clock rate to fall within the range supported by the hardware based on the installed cable type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-UIDB_ALLOC_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An attempt to create a interface failed as no PRM Uidb resource is free. Unable to allocate a Uidb index. Platform does not have any context for this interface and all future reference to the same would fail.), (Recommended Action: Avoid configuring additional interfaces. Or delete the unwanted interfaces to free up resources.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SEEK_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Most probably some problem with the procfs file system), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR backup tunnel preemption feature?
### Response:
The MPLS TE FRR backup tunnel preemption feature allows a backup tunnel with a higher setup priority to preempt an existing backup tunnel with a lower hold priority. This ensures that higher priority backup tunnels can be established even if lower priority tunnels are consuming the backup resources. It provides a way to prioritize critical backup tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-7-REGISTER_NOTIFY_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An unexpected failure in register notification failed.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_MASTER-6-INFO_SVD
### Response:
(Severity: 6), (Category: OS), (Description: There are restrictions to enable and disable Selective VRF Download. The text of the message displays more information.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_HEARTBEAT_FAILURE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected interruption in the periodic 'Hello' messages.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-MMAP_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to map shared memory. This error could occur for two reasons. 1. The system is low on resources. 2. Error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-DBG_UNKNOWN_TRACEPOINT_NAME
### Response:
(Severity: 6), (Category: ROUTING), (Description: An unknown tracepoint name requested for a debug filter.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-6-INFO_DUPMAC
### Response:
(Severity: 6), (Category: IP), (Description: ARP request received with the same destination MAC address as incoming interface MAC address.), (Recommended Action: Change the interface MAC address of one of the two devices.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-4-LOCK_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: An attempt to lock a mutex failed.), (Recommended Action: Please try restarting the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_L2TP-6-DEBUG_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB L2TP component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-TYPE_UPDATE
### Response:
(Severity: 3), (Category: MGBL), (Description: The process that is described by the node ID and job ID in this message sent a request for a stats type ID that cannot be handled. This will result in a failure to register for statistics collection.), (Recommended Action: Restarting the process described in this message will cause the request to be resent. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2C-4-WARN_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The L2VPN Uberverifier has encountered a problem in its event loop and cannot continue. In this situation it should restart.), (Recommended Action: The L2VPN Uberverifier should recover on restart. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKPLATFORM-6-REGION_TOO_BIG
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The platform driver attempted to define a packet memory region larger than is currently supported. This will be automatically reduced to a supported size.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV6_EA-3-ERROR3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'l2vpn xconnect' command in IOS XR?
### Response:
The 'l2vpn xconnect' command is used to configure a point-to-point Layer 2 VPN (L2VPN) service, also known as Virtual Private Wire Service (VPWS). It establishes a pseudowire between two provider edge (PE) routers to carry Layer 2 traffic. The 'xconnect' command binds an attachment circuit (such as an Ethernet interface) to the pseudowire.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ORA_ORABUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-OBJINREPLACE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The object type in the replace_type is invalid. The objtype is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_PM_PRESENCE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This I2C failure indicates that there was a fault when checking the presence information for the Power Modules in a power shelf. The shelf might have been removed or is not inserted correctly.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SESSION_STOP
### Response:
(Severity: 5), (Category: L2), (Description: After being secured, the MKA Session identified by the interface was ended or terminated. Possible reasons could be macsec config delete on the interface (or) no active pre-shared key present for the given CKN), (Recommended Action: If the MKA Session was not supposed to terminate, check the command history or other system logs, to find out the specific termination reason, `sh macsec mka trace errors ` and `sh macsec mka trace events` may help , diagnose the problem if the MKA Session was not supposed to terminate. Otherwise, no action required (normal operation))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPP_TCAM_RM-3-MSG_SEND_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Unable to send a message to the CPP TCAM RM server.), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure tcam resource-manager usage location < > * *SH_CMD show controllers pse qfp infrastructure tcam resource-manager error parity location < > * *SH_CMD debug controllers pse qfp tcam resource-manager all job <> loc <>* If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_EVM_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FIA driver was unable to initialize an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-6-ENFORCE_GRACE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled for a grace period.), (Recommended Action: The customer should consider purchase the license.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-3-API_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An infrastructure component has returned an error to the MBI infrastructure, so it may not be able to continue with the current operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is a Not-So-Stubby Area (NSSA) in OSPF?
### Response:
A Not-So-Stubby Area (NSSA) is similar to a stub area in that it does not allow Type 5 external LSAs to be flooded into the area. However, unlike a stub area, an NSSA can import external routes into the area by using Type 7 LSAs. These Type 7 LSAs are converted into Type 5 LSAs by the ABR before being flooded into the rest of the OSPF domain. NSSAs are useful when you want to summarize Type 5 LSAs but still allow some external routes to be imported into the area.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLU-6-BKT_COMPACTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A particular table had persistent memory failures due to heavily fragmented fragmented memory. As a last resort we attempted an aggressive memory recovery technique which succeeded. This is an informational message.), (Recommended Action: No action is required because the memory failures were auto-corrected. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-ERR_INVALID_THREAD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Detected single-threaded mpls-lsd code running on an unknown thread. This concurrency can result in corruption.), (Recommended Action: Collect LSD traces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_3_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-4-INT_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The cpuctrllib ASIC Interrupt wrapper has detected that an ASIC driver has not cleared its interrupts at the source for 1000 consecutive times. This is possibly an error in the Driver ISR, that does not process and clear all possible interrupts, or malfunctioning HW. The Interrupt is disabled to prevent the ISR from hogging the CPU.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-INVALID_MAC_CHUNK_TYPE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Ignoring incoming chunk element has this is not expected type), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_AGENT-4-FILE_PARSE_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: A file containing feature data cannot be parsed. This is an internal software error, and as a consequence, feature capability information may not be available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ncs4k-1-CRASH_NOT_SUPPORTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message in the fib_mgr to indicate that a process that doesn't support crashed has been restarted (crash, CLI or SMU installation) Process will trigger node reload to recover after collecting required information in the linecard's disk), (Recommended Action: Please collect the core file and fib_mgr traces from linecard's disk Ignore this if process was operationally crash like process crash command or process crash SMU installation those operations are not supported yet and nothing to debug at this point)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_LIB_COMMS-7-DEBUG
### Response:
(Severity: 7), (Category: HA), (Description: Internal Debug Messages), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-OBJ_LEN
### Response:
(Severity: 7), (Category: HA), (Description: An object save or get operation is being done with the wrong length buffer. This points to a logical bug in the client application.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-MEMORY_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G709-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the G709 PI component to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_FW_APP_RECV_FAILED
### Response:
(Severity: 4), (Category: SECURITY), (Description: The Firewall Controller encountered an error while processing a message received from the Firewall Application, for example a corrupt message. As a result, some virtual firewalls may not operate correctly.), (Recommended Action: If some firewalls are not operating correctly after seeing this message, the system can be recovered by restarting the 'fwc' process using the 'process restart' command. If the error occurs repeatedly, contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBDLLMGR-4-SYSCALL
### Response:
(Severity: 4), (Category: OS), (Description: A system call failed. The calling function, the failed call, and error are displayed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD-4-MISSING_TIMER_CONTEXT
### Response:
(Severity: 4), (Category: SERVICES), (Description: Required data was not available when a timer expired. A role that should be applied now is unable to be applied.), (Recommended Action: Restart the service_role_daemon process to attempt to re-enable the role. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_RMA_CARD
### Response:
(Severity: 3), (Category: FABRIC), (Description: The ASIC on the fabric board is faulty and being taken out of operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-INSTALL_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to register with the packaging subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Event manager creation got failed.Software will automatically do recovery by restarting the drp_paring process.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_XTC_WTX-3-GEN_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred in XTC WTX), (Recommended Action: This indicates a problem with WTX. Do the following action to check for errors. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mlib trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mlib trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_INFO_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, INIT error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOC3_DSX-1-SPA_RESET_NEEDED
### Response:
(Severity: 1), (Category: L2), (Description: Due to framing change on SONET port, SPA need to be reloaded for spa to function properly.), (Recommended Action: Reload the SPA using CLI 'hw module subslot <R/S/B> reload')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-ROUTER_ID_CONFLICT
### Response:
(Severity: 5), (Category: ROUTING), (Description: This informational message appears as user-configured router-id is the same as IPARM's default router id. User should change the router-id.), (Recommended Action: User should change the router-id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV_AGENT-6-IF_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SFP or XFP or CFP or QSFP enity is removed from the line card inv_agent removes the port data ehne), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_SDFEC_OOF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-SYSDB_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system is unable to access Sysdb database.), (Recommended Action: Restarting the concerned process might solve the issue. If the issue recurs, issue the following command 'show tech-support sysdb' and 'show mgmt-plane trace client <clientname> both' to gather data, and provide the exact error message and the gathered information to the Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-CIH_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Registeration of the fia driver with the CIH library to process fia ASIC interrupts failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-2-CE_SWITCH_LINK_STATE_CHANGE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The internal link interface for the specified port is down.), (Recommended Action: Gather the data listed in 'required_info'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-PORTFAST_CHANGES_PENDING
### Response:
(Severity: 4), (Category: L2), (Description: The MSTP specification dictates that Portfast state changes should only be made whilst a port is disabled. In order to enact the new portfast configuration, ports should be shutdown.), (Recommended Action: Shut and unshut any interfaces on which portfast configuration has been updated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_STR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in stats infra component. The error string and return value gives the reason for the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-COFO_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Both link-id and ipv4 address not present to create a next-next-hop. advertise link-attributes config might be missing.), (Recommended Action: Config advertise link-attributes if not configured)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls label range' command in IOS XR?
### Response:
The 'mpls label range' command is used to configure the range of local labels available for allocation by the MPLS protocols. It allows the operator to partition the label space and assign specific label ranges for different MPLS applications such as L3VPN, L2VPN, and MPLS TE.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_STAT_VEC_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 state error on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-REPO_INACCESSIBLE
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR install infrastructure has failed to access the specified repository. This may be due to the URL in the repository configuration not being accessible, or because the URL does not contain the required repository metadata.), (Recommended Action: Check that the specified repository has correct configuration, in particular that the URL is accessible and represents a repository.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-BD_ALREADY_ASSOCIATED
### Response:
(Severity: 3), (Category: L2), (Description: Bridge domain is already associated with logical switch, first remove this association.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-BPDU_INCORRECT_DIRECTION
### Response:
(Severity: 3), (Category: L2), (Description: STP only expects to be punted RX packets, but has received a BPDU with the TX direction.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IPHC_CONFIG
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA received invalid or unsupported IPHC config for this interface. The error message describes which piece of config is invalid. The most likely reason for this is incorrect IPHC user configuration.), (Recommended Action: Check that the IPHC user configuration is valid and supported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-4-FD_CLOSED
### Response:
(Severity: 4), (Category: OS), (Description: MB socket FD closed), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Cisco IOS XR microkernel architecture?
### Response:
The Cisco IOS XR microkernel architecture is designed to provide a highly modular, scalable, and resilient operating system. It keeps most OS functionality outside the kernel in separate processes with protected memory spaces. This enables fault containment, process restartability, and minimizes service disruption due to process or kernel failures.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_REPAIR_DATABASE
### Response:
(Severity: 4), (Category: L2), (Description: When repairing the checkpoint structures for the named database an error occurred in the database checkpoint registration. As a result the process was intentionally restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPL-3-PAK_CSUM_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: A checksum mismatch was detected for a packet by NCD.), (Recommended Action: The clients of NCD will attempt to recover from this situation by retransmitting the packets. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_SF_SD_EVENT
### Response:
(Severity: 3), (Category: OS), (Description: APS SF_SD Triggers from Alarm HAL. It is applicable for Digi 20x10g and 2x100g Digi cpak cards.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTS-3-TSS_CMD_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred while exeucting a TTS command.), (Recommended Action: The arguments supplied to tts commands are most probably wrong. Check the arguments. Or the sequence of operations could be wrong.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_USER_LOGOUT
### Response:
(Severity: 6), (Category: SECURITY), (Description: SSH vty user logged out.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER_RSP4-3-SSD_PWR_FAULT_ERR
### Response:
(Severity: 3), (Category: DRIVER), (Description: This indicates that IOFPGA has detected the PWR fault for SSD, there is a potential risk to the SSD device that it may lead to indeterminate state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_DEBUG-3-CLEANUP_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Debug library cleanup failed), (Recommended Action: Please contact Cisco TAC for support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-4-LTRACE_INIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB (D)RP component.), (Recommended Action: Platform software will correct itself if this happens. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_REKEY
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd rekey information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-6-LOCAL_MTU_TOO_SMALL
### Response:
(Severity: 6), (Category: L2), (Description: The peer has sent a NAK in response to the local MRRU value. The value it is suggesting for the MRRU is larger than the local bundle admin MTU, so it cannot be accepted. However, suggesting a smaller value will almost certainly lead to repeated NAKs (since the peer should be suggesting its minimum possible MRRU value), so the LCP session will be closed for a short time and then negotiations will be retried.), (Recommended Action: Reconfigure the interface's MTU to a larger value, taking into account the Layer 2 headers. Once these headers have been subtracted, the Layer 3 MTU needs to be at least the value suggested in the message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-POLICER_VERIFY_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: QoSEA while verifying finds the hardware is not updated properly after retry), (Recommended Action: Remove and reapply policy and check the hardware and sw entries are in sync.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-MUTEX_LOCK
### Response:
(Severity: 3), (Category: OS), (Description: Failed to lock the mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOGMIB-3-NOMEM
### Response:
(Severity: 3), (Category: SNMP), (Description: No memory on the system to perform this opertion.), (Recommended Action: Collect the show logging output , along with show watchdog memory-state and also collect show memory and show process memory <jid> of mibd_infra on the location where the process have been seen)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN carrier supporting carrier feature?
### Response:
The MPLS VPN carrier supporting carrier (CSC) feature enables one MPLS VPN service provider to allow other service providers to use a segment of its backbone network. The service provider that provides the segment of the backbone network to the other provider is called the backbone carrier. The service provider that uses the segment of the backbone network is called the customer carrier.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of a BGP route-map on IOS?
### Response:
A BGP route-map on IOS is used to filter and modify BGP path attributes for routes being sent to or received from a neighbor. It allows matching on prefix, AS path, community, etc. and setting attributes like MED, local preference, community, etc.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-DATAARRAYTYPE
### Response:
(Severity: 7), (Category: MGBL), (Description: The datatypes entered in a data array do not match the the expected datatypes.), (Recommended Action: Use the classinfo command to get more information about the naming or value information of a class. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT-2-GRP_ALM_CRIT
### Response:
(Severity: 2), (Category: SERVICES), (Description: The monitored flow has traffic issues as indicated by the react trigger. The problem is introduced either at some upstream router or even at the traffic source itself. Alternatively, a configuration mismatch between the traffic source and this router (for the flow data rates etc) can cause this error.), (Recommended Action: Check to see if traffic source is indeed sending traffic. Check that the traffic characteristics defined at the source match that on the monitoring router. Trace the traffic flow upstream to the source and verify flow-mon statistics at each applicable hop. Check for packet drops for the flow at intermediate hops - between source and the monitoring router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_BFD_TIMEOUT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The BFD session for the specified interface destination timed out. \ The first %s refers to the tunnel name. The second %s refers to \ Sub-LSP destination. The third %s refers to list of RRO addresses. \), (Recommended Action: None. This is a solicited message (by 'logging events bfd-status' \ configuration under tunnel interface) and is informative only. \)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP9
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-2-LTRACE_RETRY_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Jacket process spawns the SPA process and waits for the initialization to complete. But initialization fails putting SPA into FAILED state. As part of retry mechansim, the above message is seen.), (Recommended Action: If the issue occurs, Check the SPA state. If it is not OK, then collect the following traces 1) show plim jacket all location 2) show hw-module traces infra detailed location 3) show plim ether trace info/error location 4) console logs)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_ID_LENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: Bad system ID length (ID-LENGTH, should be 0 or EXPECTED-LENGTH) from SOURCE_IF. This system received a pdu reporting an invalid system ID length of ID-LENGTH. This system only accepts values of 0 and 6 (both indicate 6). The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: During Frame Relay Local Management Interface (fr_lmi) process startup an unrecoverable error occurred. The process fr_lmi will exit and should be restarted by the System Manager. The imapct overall would be LMI protocol not running and line protocol state messages will not be exchanged between the nodes.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_1_FIA_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error from FIA for NPU-1 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-INVALID_ARGS
### Response:
(Severity: 3), (Category: OS), (Description: Detected invalid arguments.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-SRGB_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: Information regarding allocation, free, or other SRGB events. IT should not be alarming), (Recommended Action: IF this message continues to be displayed for for several minutes, then restart the isis process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD-3-FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD Driver partner encountered a fatal error and is not able to recover from the error.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed the there is no need to take any action. Otherwise check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-DEBUG_REGISTER_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when registering with the debug library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-AF_SLOW_PEER_RECOVERED
### Response:
(Severity: 5), (Category: ROUTING), (Description: The peer previously declared as slow has caught up with its other peers.), (Recommended Action: The issue has been resolved no action is needed)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_DEBUG_INIT
### Response:
(Severity: 3), (Category: OS), (Description: The program cannot initialize its debug capabilities.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-TIMER_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The shelfmgr could not initialize one of its timers, this may occour when sufficient resources are not available. The shelfmgr will attempt to recover by restarting up to 5 times. If the issue persists, the RSP will be reset which will cause the standby RSP to take over as active.), (Recommended Action: None, since the system will perform recovery action automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-LIB_INT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager DLL encountered an error due to internal software issue and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The ARP process failed to initialize correctly. In this situation ARP restarts, but ARP may not recover if there is a persistant error in the IOSXR system and ARP is later unable to reestablish its connections and initialize successfully.), (Recommended Action: Please collect the output of show tech-support arp. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-TEMP_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Over temperature error), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VMANCLNT-5-VMAN_NOTICE
### Response:
(Severity: 5), (Category: LIB), (Description: Notice messages from virtualization manager client library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_CFG-1-ERR_WARNING_RDM_CFG_MISMATCH_ALL
### Response:
(Severity: 1), (Category: L2), (Description: The user configuration has caused an inconsistency in the interface hardware profile.), (Recommended Action: Please reload the router or all msc-x boards to remove the inconsistency. To reload use the command '(admin) reload location all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEAT_MGR-3-MSTATS_ALLOC_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature Manager failed to allocate statistics entry for ACL. Number of ACL entries requiring statistics entries has exceeded statistics entries reserved for security ACLs on this line card. As a result, per ACE hardware accouting for the failed ACL entries is not available. There is no impact on ability to apply security ACLs in hardware.), (Recommended Action: If per ACE hardware accouting is needed for ACL in error message, reduce security ACL configuration on this line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_EVENT_CONN_EVM_HANDLER
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for the posix message queue. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-MAX_AGENT_SESSIONS_EXCEEDED
### Response:
(Severity: 6), (Category: L2), (Description: Each linecard is only able to host specific number of BFD sessions. This message indicates that maximum number of hosting BFD sessions has reached its maximum. Those session creating requests after reaching this limit will purposely be prevented from being created. These prevented sessions will continuously be retried to be created in the These prevented sessions will continuously be retried to be created in the background, and they will be once resources are available (ex: once some existing essions are deleted). Those sessions in the retry queue can be viewed via 'show bfd session pending' command.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-NBR_DOMAIN_CERT_EXPIRED
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'The domain certificate of the neighbor device ' 'has expired'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-TIMEOUT_ALMOST_EXPIRED
### Response:
(Severity: 4), (Category: INSTALL), (Description: The timeout associated with an install message was close to expiring. This is a non-error condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the IP Service Level Agreement (IP SLA) feature in Cisco IOS XR?
### Response:
IP Service Level Agreement (IP SLA) in Cisco IOS XR allows measuring network performance metrics such as latency, jitter, and packet loss. It helps in monitoring the quality of service (QoS) and service level agreements (SLAs).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-ROUTES_REPLAY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Serivce layer failed to replay routes to Routing Information Base.), (Recommended Action: The Forwarding Information Base may be inconsistent. Controller/agent may initiate a recovery action by unregistering impacted VRFs and replay a new Forwarding Information Base. This error may occur on process restarts if objects cannot be played back to Routing Information Base.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-CLIENT_WRITE
### Response:
(Severity: 4), (Category: ROUTING), (Description: A client attempted to write an invalid update.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-SYSDB_GET
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent was unable to retrieve the specified item from the SysDB component.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-3-ADDIF_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM L2FIB, error), (Recommended Action: Ensure only one of the interfaces mentioned is added to the bridge domain.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-GST_PWM_TIMEOUT_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: GST PWM not received within 1 ms on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PINGMIB-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: SNMP), (Description: A software error occured when the ping process try to register for debug initialization. call failed.The process will attempt to recover from this situation by exit. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Retrying ping mib with time gap migh help.), (Recommended Action: The process will attempt to recover from this situation by exit. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Retrying ping mib with time gap migh help. If that does not work contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-DEV_SFP_SUPPORTED_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A supported error was detected during SFP initialization. A support error is reported when the SFP type can not be determined or it is not supported on the platform. The SFP is the pluggable optics on the line cards. SFP initialization may happen when linecard boots up, SFP OIR and line card process restart. The optics will not be enabled if an SFP supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the SFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-SPAWN_CP
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to spawn the 'cp' process Unable to start copying configuration from active RP to PRP.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE-3-ERR_SHMEM_TRNC_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to truncate the shared memory file fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-MAX_DISABLE_RETRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Reached the maximum number of retries to disable multicast), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-3-CONFIG_MISSING_FLOW
### Response:
(Severity: 3), (Category: OS), (Description: Error in IFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.), (Recommended Action: Provide the following log: Collect Console logs and following Information -From the Shell promt of LC and RP, fetch the file /pkg/etc/inflow.conf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_EA-3-INIT
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the Service Virtual Interface infrastructure. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-4-BOOTSTRAP_WARNING
### Response:
(Severity: 4), (Category: INFRA), (Description: ZTP was not disabled by the user configurations.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-7-HEAP
### Response:
(Severity: 7), (Category: OS), (Description: An Event Manager library function was not able to obtain HEAP memory space.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_MQ_OFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 1 MQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CERR_REGISTER_DLL
### Response:
(Severity: 7), (Category: INSTALL), (Description: The call to register the error messages of the Package infrastructure failed. Any errors returned from the Package infrastructure will not be decoded into user-friendly strings.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_PWR_SUPPLY_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-6-INFO_MSG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is a informational message in the SBUS Driver to indicate an operational status.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-4-ERR_ECM_CREATE
### Response:
(Severity: 4), (Category: FABRIC), (Description: The Fabric driver was unable to create an event connection manager for EDM. Fabric driver and the System should continue to function as normal, with the exception that the 'show' commands for Fabric driver will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_5_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWTIMERALLOC
### Response:
(Severity: 3), (Category: OS), (Description: Could get access to OS timer resources.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-TX_KEEPALIVE_SLIP
### Response:
(Severity: 4), (Category: ROUTING), (Description: Heavy CPU load or process blockage resulted in slip of discovery transmission. This may result in session flap.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAM_MANAGER-3-NOTHING_READ
### Response:
(Severity: 3), (Category: OS), (Description: Read file descriptor failed with specified message.), (Recommended Action: Check pam_manager process, show context, collect console message. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-4-PM_OPERATION_MODE
### Response:
(Severity: 4), (Category: LIBRARY), (Description: The power module output is enabled or disabled by testing tool.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encounterd some error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-RECORD_TOO_SHORT
### Response:
(Severity: 3), (Category: OS), (Description: A feature record is too short.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_4_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTSDRVR-6-OTS_PROV_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates success of provisioning), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-RESPONSE
### Response:
(Severity: 4), (Category: SNMP), (Description: A response destined for the given address could not be sent. This could be due to a low memory condition. It also might be due to the fact that there is no SNMP transport process(udp) running for that transport protocol .), (Recommended Action: Check the running processes to ensure that an udp process is running. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-4-LTRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: ltrace initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-WARN_BAG_REG
### Response:
(Severity: 4), (Category: SNMP), (Description: Failed to register the bags with SysDB. The access to SNMP statistics and MIB items in /oper/snmp/info through 'sysdbcon' might not be available. This is likely due to an internal software error.), (Recommended Action: Restart snmpd process.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-TBL_OBJ_SEG_MISMATCH
### Response:
(Severity: 7), (Category: HA), (Description: When the table ID and object ID are mapped to segment numbers, they do not match. Since an object belongs to a table and therefore resides in the same segment, this indicates a coding error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTU0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-DEBUG_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The Verification Daemon failed to cleanup its debug registrations, this may leave stale state in the debug infrastructure. The process is exiting anyway, but subsequent process restarts may hit errors within the debug infrastructure during initialization.), (Recommended Action: This error message may be safely ignored unless subsequent process restarts fail. If subsequent restarts fail, gather the output of 'show tech-support sysdb' and contact your local support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_BDI_DEMA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-7-ERROR_BOARD_READ
### Response:
(Severity: 7), (Category: MEDIA), (Description: can not read board type. - platform_get_hw_board_type_revision() return err), (Recommended Action: 'reload MSC, and if issue persists, RMA the MSC')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-4-CHKPT_SAVE_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Encountered a checkpoint save failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-API_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An infrastructure component has returned an error to the MBI infrastructure, so it may not be able to continue with the current operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-INSTALL_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr has failed to install an rpm on the specified node.), (Recommended Action: Inspect the error information and retry the installation after addressing any issues.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-NON_SERVICES_PLIM_MISPLACED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Non-Services PLIMs in the upper slot (s = 0..7) may only be powered on if there is no Services PLIMs powered on in the paired lower slot (s+8).), (Recommended Action: Place the NON-Services PLIM in a lower slot 8 - 16, or in the upper slot (s = 0..7) where there is no Services PLIM in the lower slot (s+8).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_BAD_CODE_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_BAD_CODE interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to troubleshoot MPLS L3VPN route leaking issues?
### Response:
To troubleshoot MPLS L3VPN route leaking issues, verify import and export RT configurations and use 'show bgp vpnv4 unicast vrf MyVRF' command. show bgp vpnv4 unicast vrf MyVRF
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_PATHS_LIMIT_CONFIG
### Response:
(Severity: 5), (Category: OS), (Description: This message appears if the 'segment-routing traffic-eng oor max-paths' configuration is changed to a value that exceeds the total number of SR paths that are currently programmed.), (Recommended Action: You can shut down individual policies to reduce the number of SR paths that are programmed to meet the new limit.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP downstream on demand feature?
### Response:
The MPLS LDP downstream on demand feature is an LDP label advertisement mode in which a downstream router advertises a label to an upstream router only when it is needed to forward traffic. This is more scalable than unsolicited downstream mode. It is enabled with the mpls ldp downstream-on-demand command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you initiate a configuration rollback in IOS XR?
### Response:
To initiate a configuration rollback in IOS XR, you can use the 'rollback configuration' command followed by the rollback point ID. The rollback point ID can be obtained using the 'show configuration rollback list' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_16P_OC48-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A generic error is occurred in plim_16p_oc48 PLIM driver. Cause of the error will be mentioned in the message displayed. This message is for debugging purposes.), (Recommended Action: Please collect the output for the CLI mentioned in the required_info immediately before the ltrace buffer wraps.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-USAGE
### Response:
(Severity: 7), (Category: SYSDB), (Description: Incorrect command line parameters were passed to the sysdb server, and so it failed to start.), (Recommended Action: Check the startup arguments passed to sysdb. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_11_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-3-MISSING_BASE_TYPE
### Response:
(Severity: 3), (Category: ROUTING), (Description: One of the operations in one of the ORAs used a base type that was not defined in any of the ORA math sets.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-L2VPN_SIGNAL_OVERLAP
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected that the same prefixwas learnt with a signalling type different from what was learnt initially. We do not allow both types of signalling for nets with the same RD), (Recommended Action: This msg is info only. Need to check L2VPN Configuration in the topology across all PEs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-RMF_NOTIFY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The dsc process could not notify RMF about the backup/primary dsc as mentioned in the message.), (Recommended Action: Restart dsc process If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable MP-BGP for MPLS L3VPN?
### Response:
To enable MP-BGP for MPLS L3VPN, configure BGP with VPNv4 address family. router bgp 65000
address-family vpnv4 unicast
neighbor 10.1.1.2 activate
neighbor 10.1.1.2 send-community extended
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTH_SRV-3-ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Auth Service general error message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-UNDERCOUNTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: A counter with zero value was decremented.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-SYSMGR_SPAWN_SCRIPT_EBUSY
### Response:
(Severity: 3), (Category: INSTALL), (Description: Timed out while trying to spawn a script via sysmgr), (Recommended Action: Please retry the operation after some time. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-END_PROC
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process was terminated unexpectedly. Please check if the error goes after doing process restart domain_services loc all.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an QSFP+ temperature less than or equal to the low temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-6-FEATURE_STATE
### Response:
(Severity: 6), (Category: SECURITY), (Description: Type6 srvice enabled/disbale on system based on configration of Masterkey and password6 encryption aes.), (Recommended Action: check both Masterkey and password6 encryption aes configured to enable the type6 service. for further detail contact the Cisco technical support representative with the gathered information and the exact error message as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of OSPF areas?
### Response:
OSPF allows a network to be divided into areas to provide hierarchical routing. Each area runs its own SPF calculation. Area border routers (ABRs) connect the areas to the backbone area. This reduces routing table sizes and the scope of LSA flooding for better scalability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an IPv4 static route in IOS XR?
### Response:
To configure a static route for IPv4 traffic, use the 'router static' command followed by the destination prefix and next-hop address. RP/0/RSP0/CPU0:router(config)#router static
RP/0/RSP0/CPU0:router(config-static)#address-family ipv4 unicast
RP/0/RSP0/CPU0:router(config-static-afi)#10.0.0.0/24 192.168.1.1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-3-DB_SAVE_ERROR
### Response:
(Severity: 3), (Category: LICENSE), (Description: The license manager encountered an error condition while saving the license database.This is a error while writing a file on disk . Licmgr will retrying writing the file to disk . Check the error string to determine what has happened.), (Recommended Action: Licmgr will retry writing the file to disk but if the problem persist please restart the licmgr process command 'admin process restart licmgr'. If the error log message is reoccuring, please collect informaiton using the commands 'show tech-support license ','show license trace platform' and contact your tech support representative and provide them the collected information and exact message as displayed on screen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBDLLMGR-7-UNEXPECTED
### Response:
(Severity: 7), (Category: OS), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-4-AGENTIO_WARN
### Response:
(Severity: 4), (Category: SNMP), (Description: SNMP-UDP process received a bad Message or failed to send a message to Agent. This may be due to a invalid message number or an internal software error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_SIM-7-NVRAM_SIZE_ZERO
### Response:
(Severity: 7), (Category: MEDIA), (Description: Possible error during sizing nvram, the NVRAM may not exist), (Recommended Action: 'Check if formatted and present')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-4-PM_NOT_SUPPORTED
### Response:
(Severity: 4), (Category: LIBRARY), (Description: The power module from Delta is not supported.), (Recommended Action: Replace the power module with BellPower PSU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install deactivate command in IOS XR?
### Response:
The 'install deactivate' command is used to deactivate a previously activated software package. The package remains on the router's storage but is no longer active.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_ENS_MSG
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver ENS message communication error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-INTERFACE_MANAGER_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Management Plane Protection(MPP) tries to communicate with the Interface Manager Control Server(IMC), which is failed due to some unexpected error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mgmt-plane trace client <clientname> both<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mgmt-plane trace client <clientname> both<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. and *SH_CMD show running-config control-plane')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LTRACE-6-ERR_INFO_VERBOSE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the the platform L2FIB LTRACE component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-CON_TIMEOUT
### Response:
(Severity: 3), (Category: IP), (Description: A telnet session from the specified peer has been timed out because no response was received from the remote end for the terminal-type query.), (Recommended Action: Please check the IP address of the peer. If it is not a trusted or known address, it could be a DoS attack. Please take steps to install appropriate ACLs or use MPP to avert the DoS attacks.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_QSM_REG_NOTIF
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when registering for QSM notification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-DBG_REGISTER_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register with the debug module for printing messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-WARM_BOOT_SKIPPED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: There is some unsupported configuration in use, which is not supported by warm-boot. System shall continue in cold boot mode. ASIC shall be reset and traffic forwarding would be impacted.), (Recommended Action: No further recovery is needed at this point. System shall auto-recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-IMC_BIND
### Response:
(Severity: 3), (Category: IP), (Description: An error occured while trying to bind to IM server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-SOCKET_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A socket error occurred in the map agent packet handling.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-INOTIFY_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Function specified in message failed with the specified error.), (Recommended Action: Check dumper process, show context, collect console message. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_DAMPENING_ON
### Response:
(Severity: 6), (Category: L2), (Description: Exponential backoff dampening for BFD session has been enabled.), (Recommended Action: Session entered dampening state and remains dampened for backoff time. Either clear dampening or wait for backoff time for the session to come UP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-SET_DWDM_CARRIER_FREQ
### Response:
(Severity: 6), (Category: L2), (Description: Optics Controller has provisioned optics to Non ITU Channel frequency inTHz.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-5-CONFIGURATION_SYNC_WARNING
### Response:
(Severity: 5), (Category: INFRA), (Description: XLNCd is responsible for keeping the networking stacks for IOS-XR and Linux synchronized. By default it mirrors IOS-XR interface configuration into Linux, or it can be configured to selectively mirror Linux interface configuration into IOS-XR. This message indicates that a problem was encountered when attempting to perform this mirroring. Further details of the exact problem encountered can be found by running 'show linux networking status'. This problem may be a transient issue that can be resolved automatically. An example of such a transient issue is when a large configuration update coincides with a mirroring direction change.), (Recommended Action: Check 'show linux networking status' to determine exactly what problem was encountered. If the problem is that the configuration is unsupported in the destination system then consider adjusting the configuration in the source system. If a transient issue has occurred and nothing is reported by 'show linux networking status', then no action is needed and the issue has been resolved automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-1-NOT_INITIALIZED
### Response:
(Severity: 1), (Category: INFRA), (Description: The install software component could not build the software profile as the images with which the host, sysadmin and xr partitions are baked are not found.), (Recommended Action: Internal pxe logs have to be collected from the host partition of the failed node from /var/log. Once all the logs have been collected, the node can be recovered by one more internal pxe.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_EXPIRE_CLOCK_CHANGE
### Response:
(Severity: 2), (Category: LICENSE), (Description: Upgrade Grace period will expire if clock is set back in time for more than 24 hours.), (Recommended Action: Register the device to Cisco CSSM Server and rectify upgrade OOC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-2-FATAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that HBA agent encountered Fatal internal error. Embedded String will provide details of error encountered.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-CLINFO_UNHOLD
### Response:
(Severity: 3), (Category: OS), (Description: Failed to unhold the client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-6-URG_CTX
### Response:
(Severity: 6), (Category: FABRIC), (Description: Fabricq encountered a PCL Urgent Context error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-SEM_CORR_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Egress MUX detected SEM correctable error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-ERR_SOCKET
### Response:
(Severity: 4), (Category: ROUTING), (Description: EIGRP was unable to set the specified socket option on the specified interface or VRF. EIGRP will not be able to receive any of the packets.), (Recommended Action: If the message persists, remove and readd the affected interface or VRF and if the problem still persists, restart EIGRP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: IP), (Description: The Telnet Server has encountered an error using the SysDB Library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-2-IMP_FAILED
### Response:
(Severity: 2), (Category: SERVICES), (Description: Some aspect of diversion implementation has failed. This means that traffic may be inconsistently diverted for the specified interface (ie traffic may be diverted to the service card in the ingress direction, but not on egress). Note that, where the error message indicates a single interface that is affected, there may also be other attachments impacted by the error.), (Recommended Action: Restarting the rspp_ma process on the node which produced the error may solve the issue. If not, contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-6-ASYNC_XIPC
### Response:
(Severity: 6), (Category: IP), (Description: The socket library has taken corrective measures or noticed a non-critical issue with the XIPC queue operations.), (Recommended Action: This is an informational message and no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-3-FAILURE
### Response:
(Severity: 3), (Category: MEDIA), (Description: Syncfs failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_STATE
### Response:
(Severity: 4), (Category: L2), (Description: An error has occured processing an incoming SSRP state for the client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider restarting the PPP MA process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key characteristics of the QNX Neutrino RTOS used in IOS XR?
### Response:
QNX Neutrino is the third-party real-time OS used as the foundation for IOS XR. Its key characteristics are\n- Microkernel architecture\n- Preemptive multitasking and multithreading\n- Memory protection and fast context switching\n- Message passing based IPC\n- POSIX compliance\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-WRITE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Display dst mac address. %s- Message description.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PORT_STATE_CHANGE_LINK_UP
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message indicating that the physical link state of the specified port has changed to up.), (Recommended Action: This is an informational message and does not necessarily indicate a problem. The port's physical connection should be checked if an unexpected status change occurs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVEDGE_DATA-3-IRL_MAXSLOT_LIMIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Recommendation for better IRL resiliency), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-BRIDGE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to delete bridge in the platform L2FIB BRIDGING component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_BUNDLE_NO_ECHO
### Response:
(Severity: 6), (Category: L2), (Description: This BFD over bundle session cannot run echo mode due to lack of PPS resources. The session will continue to run in async mode until PPS is available. Once PPS resources have been cleared up, then disable and enable echo mode on this interface via configuration to startup up the echo mode.), (Recommended Action: Remove other BFD sessions to free resources for this session)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB_API-3-ASYNC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: 'An unhandled asynchromous error occurred in the MRIB API'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FAN_MISSING
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Fan Unit is Missing (SAT_FAN_MISSING) alarm is raised when the fan-tray assembly is not present in the CPT 50 panel.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PREF_COMPR_LIB-6-V6_ANCHOR_PREFIX
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The IPv6 compression anchor prefixes are changed. The linecard needs to be reloaed to make the changes effective. This is not an error message or condition.), (Recommended Action: The IPv6 compression anchor prefixes are changed. The linecard needs to be reloaed to make the changes effective. This is not an error message or condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_INTERNAL
### Response:
(Severity: 3), (Category: L2), (Description: An internal error occurred that was expected to succeed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_ROUTES_OK
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-TBL_OBJ_SEG_MISMATCH
### Response:
(Severity: 7), (Category: HA), (Description: When the table ID and object ID are mapped to segment numbers, they do not match. Since an object belongs to a table and therefore resides in the same segment, this indicates a coding error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_NETIO_LIB-4-GET_MYNODEID_FAIL
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Unable to determine my node id using platform api.), (Recommended Action: Please capture show proc ouput and show logging output - 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-PM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed PM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-6-LTRACE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB LOCSW component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-DEVICE_NOT_IN_WHITELIST
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'The autonomic network registration authority ' 'will not allow this device to join as it is not in whitelist'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-6-REMOTE_SESSION_STOPPED
### Response:
(Severity: 6), (Category: L2), (Description: A remote latching loopback session has been stopped. This is for informational purposes only.), (Recommended Action: If the session stop was unexpected, an attempt to restart the session can be made using the remote loopback start action command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-DATA_CORRUPTION
### Response:
(Severity: 7), (Category: HA), (Description: Data corruption is detected in checkpointing data structures. This will generally result in a single process failure.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_REBIND
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the path supplied is invalid. The details are in the error string.), (Recommended Action: Check that the path is valid. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-ALARM_INDICATION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Alarm indication received from CBC. This may be a serious failure (example: power sequencer failure), however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Provide the following CLI: (admin)# show env Use the pid from canb-server output to look for matching pid in the pfm output. If the alarm indication does not clear within 30 minutes, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-UBLAZE_PRE_BOOT_FAIL
### Response:
(Severity: 3), (Category: DRIVER), (Description: The MicroBlaze in IOFPGA has detected a fatal condition that is preventing the card from booting. The IOFPGA driver will attempt to recover from this failure by issuing a IOFPGA COLD RESET operation.), (Recommended Action: Physical remove and then re-insert the card to see if the problem can be corrected if the auto recovery mechanism performed by the IOFPGA driver cannot recover the failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-6-MASS_WITHDRAW_RECEIVED
### Response:
(Severity: 6), (Category: L2), (Description: EVPN: Received mass withdraw indicator.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-GROUP_COUNT
### Response:
(Severity: 3), (Category: OS), (Description: Unable to get group count for PLACEMENT_GSP_GROUP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support gsp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support gsp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-INCORRECT_GROUP_ID
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some special considerations when using TURBOBOOT on Cisco 12000 series routers?
### Response:
When using TURBOBOOT on Cisco 12000 series routers (running IOS XR), note that\n- The ROMMON variable ENABLE_TURBOBOOT must be set to 1\n- The ROMMON variable TURBOBOOT must specify the disk slot (disk0 or disk1)\n- A minimum boot image (MBI) is required to boot the standby RP\n- The `show platform` command can be used to verify the standby RP has booted the MBI\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_5_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-CANNOT_GET_BLOB_SIZE_IN_A2STRUCT
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-5-DEVICE_UNFORMATTED
### Response:
(Severity: 5), (Category: MEDIA), (Description: The media storage card specified is unformatted. There are problems with the boot sector contents.), (Recommended Action: Verify that media device was formatted. If not, then format media device manually. If it still fails, replace media device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CARD_RELOAD_CFG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Setting of the reload attribute on the indicated card has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVENTORY_DESCRIPTION_NULL
### Response:
(Severity: 3), (Category: MGBL), (Description: Description string is null.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-ENTITLEMENT_RENEW_SUCCESS
### Response:
(Severity: 6), (Category: LICENSE), (Description: Authorization renewal request is successful.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-ARTIFACTS_COPY_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Artifacts copy failed description), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-3-INCONSISTENT_CONFIG
### Response:
(Severity: 3), (Category: L2), (Description: The user is trying to configure a dot1q vlan or qinq vlan that shares the same outer vlan id with that of an already configured qinq or dot1q outer vlan id. An error has to be reported to inform the user to remove the inconsisent configuration. The inconsistent configuration is that the same outer vlan id has been configured, and the software can only accept one sub-interface, so the last configured sub-interface is not applied.), (Recommended Action: Upon seeing this message, delete the sub-interface that has just been created. Otherwise the system will be in an inconsistent state, where the configuration believes it has two sub-interfaces sharing the same outer vlan id, when in reality the last configured sub-interface has not been applied. Traffic going to that shared outer vlan id will behave as the original configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Open Shortest Path First (OSPF) routing protocol?
### Response:
OSPF is a link-state routing protocol used to distribute IP routing information throughout a single autonomous system (AS). It gathers link state information from available routers and constructs a topology map of the network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-6-INFO_MAC
### Response:
(Severity: 6), (Category: IP), (Description: The specified MAC address is invalid as it is a broadcast address - all the bits are set. Configuration has therefore been rejected.), (Recommended Action: Configure the MAC address so that it does not have all the bits set.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-EVM_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to create an an event manager. An event manager is a mechanism used to handle events. This error could occur for two reasons. 1. The system is low on resources. 2. Error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NF_PRODUCER-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to setup event manager.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-EVPN_MEM_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Calloc operation failed, check memory usage for process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV4_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-CHKPT_TBL_ADD
### Response:
(Severity: 7), (Category: SERVICES), (Description: Failed to save a record into the given checkpointing table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ONLINE_DIAG-3-PUNT_FABRIC_DATA_PATH_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PuntFabricDataPath test failure detected, detail in the form of slot, NP, VQI'S. which that specific vqi is stuck and any subsequent data traffic pertained to that vqi's will be dropped.), (Recommended Action: 'please collect show tech fabric and contact Cisco TAC Support')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-OPERATION_LOCK_RELEASED
### Response:
(Severity: 6), (Category: INFRA), (Description: Install operation lock which is maintained by the Admin install has been released. User is notified that a new install operation can be started.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE1_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE1_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-6-SVC_INFO
### Response:
(Severity: 6), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_8_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER_RSP4-3-RECOVER_PEER_RP
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when registering debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-TREE
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred while accessing the ATM VCCLASS internal data structrure. There might be an inconsistency between the SysDB and the vcclass tree or the vcclass tree is corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_MQ_OFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 0 MQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-3-SYSDB
### Response:
(Severity: 3), (Category: OS), (Description: A call to a sysdb interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MAX_LEN_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error FIA 11 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-SHUTDOWN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: TACACS+ process failed to shutdown properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-PFXLIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Number of prefixes for eigrp has reached the configured or default limit.), (Recommended Action: Use \'show eigrp accounting\' for details on the source of the prefixes and take corrective measures.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSPI_ASYNC_FIFO_L72_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TxSPI async FIFO low 72bits data multiple bits ECC error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-ETHERNET_DEVICE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ethernet driver failure. %s- Message description. %d- Reason for the failure.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-ERR_LIB_REG
### Response:
(Severity: 3), (Category: L2), (Description: This message indicates this process has encountered an internal software error. Process was failed to register library routine. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error is normally associated with larger system issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-7-UNKNOWN_REQTYPE
### Response:
(Severity: 7), (Category: OS), (Description: PlaceD received an unknown message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-2-GOLDEN_BIOS_BOOTED
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fabric Links will be down if system booted with Golden BIOS.), (Recommended Action: Check if Card is booted with Golden BIOS. In this case, it is expected Fabric will not come up on this Card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_CREATE
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the item to create already exists. The details are in the error string.), (Recommended Action: Check that the item to create does not exist. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_SCH_MEMP_ERR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Scheduler Hang, Sram or egress mid-fifo parity error on NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-ERR_PATH_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv6_rib_batch_add_path.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-6-SAT_UNQUAL_PPM
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Unqualified PPM Inserted condition occurs when a PPM with a nonqualified product ID is plugged into the card's port; that is, the PPM passes the security code check as a Cisco PPM but is not qualified for use on the particular card.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_OC_DELM_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS from FIA delm error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-3-RESTART
### Response:
(Severity: 3), (Category: SYSDB), (Description: Conflict in LBL values.Need to restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-2-PHASE2_FATAL
### Response:
(Severity: 2), (Category: MGBL), (Description: The TTY Server has failed to complete phase 2 initialization. For this instance of the server the failure is fatal; without the services that were being initialized the code will not be able to function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-4-XR_PART_PREP_REQ
### Response:
(Severity: 4), (Category: INFRA), (Description: SDR Mgr has requested for SDR partition. Install will look for available partitions and if any partition has matching software then it will be provided else new one is created and baked with image/RPMs. User has to wait till SDR/XR is spawned. Reloading of card has to be avoided till SDR comes up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPIDB-4-WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A run time warning occurred during the pidb operation on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the configuration session lock feature in IOS XR?
### Response:
The configuration session lock feature in IOS XR allows an administrator to lock the configuration mode so that no other user can make configuration changes. This prevents multiple users from making conflicting changes simultaneously.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-ERR_INCOMPATIBLE_API
### Response:
(Severity: 3), (Category: L2), (Description: Obsolete API usage, it can be caused due to incompatible component installed in the system.), (Recommended Action: No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-IMP_SERVER_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: failed to initialize with IMP server), (Recommended Action: No action is required. Process will be restarted.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify MPLS L3VPN configuration?
### Response:
To verify MPLS L3VPN configuration, use the 'show vrf' and 'show bgp vpnv4 unicast all' commands. show vrf MyVRF
show bgp vpnv4 unicast all
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-TRANSCEIVER_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: TRANSCEIVER entity is inserted into the line card), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-ERR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failure in Inventory Manager resulting in error condition %s - indicates the reason of the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-1-NODE_RELOAD_FAILED
### Response:
(Severity: 1), (Category: INFRA), (Description: The IOS-XR install infrastructure has attempted, but failed, to reload one or more nodes in the system. These reloads are required to ensure that: - The appropriate software is running on each node - The set of running software across the whole system is consistent), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. It may be possible to issue a manual reload of the relevant node(s) from the XR CLI on the active RP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-CHKPT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-6-SOFT_BANDWIDTH_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: The soft bandwidth is changed according to the Max bandwidth of this port.), (Recommended Action: If any soft bandwidth is configured greater than current max badnwidth. That particular config has to be removed. Otherwise it will result in config failure on spa/LC reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_MA-3-INIT
### Response:
(Severity: 3), (Category: SERVICES), (Description: The VASI Manager failed to startup correctly. Though it will get automatically restarted, the error is unlikely to be recoverable.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-MMAP_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: mmap system call returned an unexpected error Debug trace buffer initialization failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_MPLS_EA-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A non-fatal fault occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_P2MP_SRVR-2-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An error occurred in the event loop. It may be possible to rectify it by restarting the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_GIFT-4-MBR_RETRY_NOTICE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The hardware configuration for some bundle interfaces have not been applied; the system is retrying to apply the configuration. Hitting this error typically indicates that traffic on the bundle interface will be affected until the hardware configuration has completed.), (Recommended Action: None, platform software will correct itself if this happens. Verify the PD programming using how gift db retry location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-3-PM_NOT_INSERTED_PROPERLY
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The power module might not be fully inserted.), (Recommended Action: Please check the PSU and make sure the PSU is fully inserted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_HARD_RESET
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and need a hard reset.), (Recommended Action: An error has happen and HARD reset has been performed to recover. Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-1-ZERO_CAPACITY
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Capacity in the IDPROM is zero.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-3-ASSERT_MSG
### Response:
(Severity: 3), (Category: HA), (Description: Cdm hit an internal assert.Some api call didnot work as expected. assert will generate core dump.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the max-lsp-lifetime command in IS-IS?
### Response:
The max-lsp-lifetime command is used to configure the maximum lifetime that an LSP can have. By default, the maximum LSP lifetime is 65535 seconds. If an LSP's lifetime exceeds this value, it is purged from the database. This command provides an upper bound on the LSP lifetime to prevent stale LSPs from persisting in the network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_RRW_UNLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to release rrw lock to the request record area in shared memory. This is a fatal error, the process will automatically restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_MGR-3-ADJ_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The SVII Adjacency Manager encountered an error while programming an adjacency. Packets may not be forwarded to the affected service interface. The name of the interface can be retrieved with 'show im chains ifhandle 0xabc', where '0xabc' is the interface handle shown in the message.), (Recommended Action: This error should only arise due to resource constraints (eg memory). Determine which resources are short, and make more available; then restart the 'svi_adj_mgr' process on the affected node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_SPP-3-ERR_THREAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HFR SPP Thread Error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error , Error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-1-UPGRADE_SKIPPED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The given FPD upgrade was skipped for the given reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-INIT_GR_EXIT_TOUT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-FRR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message provides information about the IP FRR events happening in the software at the location where the error is seen. This is not an error message. Typically, following events are logged in this message type. - End of successfull initialization of the software. - Start and end of a processing of new object that needs to programmed to the hardware.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_VRF-3-DUPLICATE_ID
### Response:
(Severity: 3), (Category: ROUTING), (Description: A ID has been received from RSI that duplicates an existing VRF or table ID. As a result, the new ID has been ignored, and subsequent operation for that VRF will be incorrect.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-INIT
### Response:
(Severity: 2), (Category: ROUTING), (Description: FIB initialization has failed due to the reason indicated in the message. The process will attempt to recovery by restarting. If the restart count is excessive then the node may reload. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-CPU_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has detected that the CPU complex in the indicated card is reporting an error condition that could be fatal and would need user intervention to reload the card if it doesn't get auto-corrected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-IMG_DLOAD_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in downloading Linux/Application image. Cause of the error will be mentioned in the message displayed. This error prevents Services PLIM from coming up to its full functional Active state.), (Recommended Action: Do cold reboot of Services PLIM MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP community attributes for MPLS L3VPN?
### Response:
To configure BGP community attributes for MPLS L3VPN, use the 'set community' command in route-policy configuration mode. route-policy MyPolicy
set community 65000:999 additive
router bgp 65000
address-family vpnv4 unicast
vrf MyVRF
neighbor 10.1.1.2 route-policy MyPolicy in
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-ERR_MEM_ALLOC
### Response:
(Severity: 7), (Category: MGBL), (Description: XML schema browser was unable to allocate enough memory required to process the command), (Recommended Action: Memory on the box must be running low - are there services that can be stopped, or can more memory be added.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-MAC_CFG_PW_CONFIG_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: mac limit/action on pw not supported.), (Recommended Action: Remove mac limit/action config from pw bport.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-CONFIG_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: config will be activated only after a line card reset), (Recommended Action: config will be activated only after a line card reset. Reboot the LC during the next maintenance window.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-CARD_IDPROM_READ
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was not able to retrieve a valid IDPROM image from the indicated card. This failure will prevent registration of detail card information to the system inventory. The card will show up with UNKNOWN card type in <CmdBold>show platform<noCmdBold> command output and it won't be fully operational due to this failure.), (Recommended Action: Use <CmdBold>hw-module location<noCmdBold> <CmdArg>location<NoCmdArg> <CmdBold>reload<noCmdBold> command to reset the card to see if it can clear any I2C issue that was preventing the reading of the IDPROM. If the problem is due to CCC FPGA not ready as indicated in the error message, then there is some HW issue that is preventing CCC FPGA from booting. If <CmdBold>hw-module location<noCmdBold> <CmdArg>location<NoCmdArg> <CmdBold>reload<noCmdBold> command cannot reset the card, try to physically OIR remove and then insert the card to see if CCC FPGA will boot. The status LED should turn on to solid yellow color when CCC FPGA boots.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the Configuration File System (CFS) in IOS XR?
### Response:
The Configuration File System (CFS) in IOS XR is a virtual file system that stores the running configuration, committed configurations, rollback points, and configuration templates.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-FAILED_CREATE_THREAD
### Response:
(Severity: 3), (Category: MGBL), (Description: config process is failing to create a separate thread for creating and handling edm requests.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-2-EIO_TRAIN
### Response:
(Severity: 2), (Category: L2), (Description: EIO training errors. The EIO link to the PLASPA failed to train. This will result in traffic loss through this PLIM.), (Recommended Action: Check seating of both the PLIM and the MSC and then reload the MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-USAGE
### Response:
(Severity: 3), (Category: OS), (Description: Incorrect command line arguments were given to the module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-GET_PROC_CURTHREAD_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Dumper collects all the process related data by using system call devctl. If a devctl fails, then the core file will be incomplete. This will not impact the system.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP temperature greater than or equal to the high temperature warning threshold. The SFP is the pluggable optics on the line cards. The temperature threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd 'location all', 'admin show inventory' and 'show environment temperatures'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-FAILED_OUTPUT_ERROR
### Response:
(Severity: 4), (Category: INSTALL), (Description: A user error occurred but failed to be output to the user.), (Recommended Action: Repeat the operation. Consult the release-notes if applicable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-INVAL_ST_DRVR_HNDL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Error occured during fabric driver handler.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-1-I2C_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-ERR_FILE_WRITE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while writing to the file .), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-SHUTDOWN_CHECK_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A Precision Time Protocol process could not determine whether all Precision Time Protocol configuration has been removed and so cannot exit safetly. Precision Time Protocol processes may be running despite no Precision Time Protocol configuration existing.), (Recommended Action: No action is required. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-CREATE_TIMER
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to create and initialize its various managed timers.This message would appear during Initialization of DNS process (i.e. domain_services). The error should go away with process restart), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-NO_CHILD
### Response:
(Severity: 3), (Category: OS), (Description: All parents in a managed timer tree should have at least one child.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-3-LWM_CHANNEL_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The rpl multi-version coordinator was unable to publish its channel in the global space. The coordinator will exit so the system manager can restart it. Route policy may not be operational until this is resolved.), (Recommended Action: This error message may be transient. Restart policy_repository and try the use case again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-1-FABRIC_ADMIN_CFG
### Response:
(Severity: 1), (Category: FABRIC), (Description: If the admin startup config is not received, then the fabric planes cannot be configured and brought up. If the fabric is not UP, system cannot be used for any data traffic.), (Recommended Action: This indicates a problem in config manager or sysdb in the system that prevents the startup config from being applied. Please wait for a while to see if the config gets applied, if conditions persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM_COMMON-3-LOGGING_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: Error while logging nvram activity), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-EVM_THREAD
### Response:
(Severity: 3), (Category: OS), (Description: QNET process had encountered a problem in its EVM thread while wating for event. The thread will exit and retry again), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-MUTEX_LOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver has been unable to lock access to the UART.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-MACSEC_DISABLED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_CID_SES_THRESHOLD_NOT_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE1_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE1_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-4-FORCED_MAINTENANCE
### Response:
(Severity: 4), (Category: L2), (Description: If Forced Maintenance has started at a port, it means that the port was put into Transport Admin State of 'maintenance' when this activity was actually disallowed for it. Forced Maintenance ends when, either maintenance at the port is allowed again by the administrator, or when the Transport Admin State is changed back to some other rather than 'maintenance'.), (Recommended Action: A forced maintenance activity implies that there may be loss of traffic. A port should not be put into maintenance state (unless its absolutely necessary) if maintenance is disabled by the administrator. That status can be checked using show interfaces CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-MSG_SIZE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-FILE_COMPRESS
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to compress the file), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set RSVP bandwidth limits?
### Response:
To set RSVP bandwidth limits, use the 'rsvp bandwidth' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp bandwidth 100000 2000
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVALIDRANGE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The numerical range within the token details structures is invalid'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONAUX-3-AUX_BLOCK_REG_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ConAux Identity module has been unable to register the aux block.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-6-FIRMWARE_UPGRADE_NOT_SUPPORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'V3 power module firmware upgrades are not supported at this time'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_CLIENT-6-WARNING_WRAPPER
### Response:
(Severity: 6), (Category: ROUTING), (Description: A function call failed unexpectedly - this is probably a system problem), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-BAD_VSA_TYPE
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA format error found in radiusd while translating.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-BANDWIDTH
### Response:
(Severity: 6), (Category: L2), (Description: The bandwidth for BNM Enabled Link is now known or has changed, this can occur in response to the link receiving a BNM, its configured loss threshold being exceeded, or its hold-off or wait-to-restore timers expiring. This message appears because the interface which the BNM Enabled Link belongs to has 'bandwidth-notifications log changes' configured.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_0_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-DEBUG
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an error using the debug service. The error message describes what operation has failed and why it failed. The error could be caused by low memory resource or programming error.), (Recommended Action: In many cases, ELMI will recover by itself. If it does not then restarting the process may help. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-SHELL_SPAWN
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: clustermgr is spawned from shell.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMENGINE-4-TCA
### Response:
(Severity: 4), (Category: L1), (Description: The specified PM TCA has been declared.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-OIR_SAVE
### Response:
(Severity: 6), (Category: MGBL), (Description: This is message indicates that configuration for this node has been saved.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ERR_RCV_PAKTYPE
### Response:
(Severity: 6), (Category: ROUTING), (Description: An invalid packet was received on the specified interface (and, in the case of a LAN interface, SNPA). The packet is invalid because its type code is either unrecognized or inappropriate (e.g. a point to point IIH on a LAN interface). The packet has been ignored.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLTLV-6-MSG_GENERIC_FUNC
### Response:
(Severity: 6), (Category: OS), (Description: BCLS TLV processing hit some error condition.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-MAXIMUM_PARTICIPANTS_EXCEEDED
### Response:
(Severity: 3), (Category: OS), (Description: The maximum number of active participants for a shmwin window has been exceeded), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin summary location 0/x/CPUx - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-IMDR_COMPLETION_TIMEOUT
### Response:
(Severity: 6), (Category: INSTALL), (Description: As part of ISSU operation, iMDR done on LCs has timedout and an extension is being done by install ISSU infrastruture. This is an informational message that iMDR completion has not been seen.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-MULTIPLE_ENCAP_NOTSUP
### Response:
(Severity: 3), (Category: L2), (Description: EVPN does not support change in encapsulation and/or mutiple encapsulation for the same route. Most likely scenario is that the remote ToR (VxLAN) and remote DCI (MPLS) are using the same ESI, or remote ToR(VxLAN) is using same ESI as local DCI pairing (MPLS). This will cause ES/EAD, EVI/EAD or MAC routes to alternate(flap) between VxLAN encap and MPLS encap.), (Recommended Action: Perform network level review, and ensure Ethernet-Segment Identifiers are truly unique and represent individual ethernet sgments.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-LOCKING
### Response:
(Severity: 3), (Category: SECURITY), (Description: radiusd has either failed to obtain or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-SYSDB
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred when accessing the system database), (Recommended Action: This will cause failure of sysdb initialization. Please check initialization failure message for the recommended action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-1-REQUEST_RELOAD_BOARD
### Response:
(Severity: 1), (Category: L2), (Description: An ASIC error has occurred multiple times and has failed to recover despite power on reset. The board has been requested to be reloaded in an attempt to clear the problem.), (Recommended Action: The output message is warning board reload request.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_SENSOR_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The sensor in the satellite module reported a critical hi/lo sensor value against the configured threshold value.), (Recommended Action: Verify current sensor temperature values using the CLI: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. --> particularly for temp output of SAT ID. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env trace <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env trace <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-NHDB_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to delete an next-hop descriptor block from the nhdb AVL tree.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-PTHREAD
### Response:
(Severity: 3), (Category: OS), (Description: A call to a pthread interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-1-ACE_SYSLOG_ALERT
### Response:
(Severity: 1), (Category: SECURITY), (Description: ACE SPA SYSLOG message), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-MSG_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostics software received a message with an unknown message type and was not able to process it. This is a serious error and indicates message or memory corruption or a bug in the software. This is not a service impacting error.), (Recommended Action: Check the log ('show logging') to determine if there are any other related error messages. Also, please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area. If the error continues, copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Also collect the information from 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-WARN_STR_PRM_OOR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PLATFORM FIB, PRM warning), (Recommended Action: Please check hardware resources, show cef platforms oor stats location <>. Verify whether the scale of the configuration exceeds the hardware limit. Consult your technical support representive if any further question regarding to the scale)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_0_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-3-SYS_PROFILE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get the system profile information. This is an error returned from system profile component. This failure indicating that line card can not perform its basic functions, such as ping and passing traffic.), (Recommended Action: Collect required information and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_STAT_VEC_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 state error on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_READING
### Response:
(Severity: 7), (Category: MGBL), (Description: Reading value of calendar chip at offset.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-TERM_LICENSE_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The term of the license has expired.), (Recommended Action: The customer should reserve a valid license.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUMI-3-BACKUP_FPD_LOADED
### Response:
(Severity: 3), (Category: INFRA), (Description: The output of 'show hw-module fpd' will show the affected image with BACK IMG state. This can happens when TUMI detects that Primary image is corrupted, so it fallback to load the backup image to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for TUMI to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZEN-7-SB_MBOOT_FAILURE
### Response:
(Severity: 7), (Category: INFRA), (Description: Additional debug infor Secure Boot validation failure.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-DEBUG_KEY_CREATE
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUMP-2-ERR_MEM_ALLOC
### Response:
(Severity: 2), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CAIBIST-3-ERR_HW_BIST
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BIST failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-ERR_UNSUPPORTED_GROUP
### Response:
(Severity: 3), (Category: SECURITY), (Description: RADIUS does not support command authorization and command accounting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NODE_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the shelf manager detected the specified node has reset. Node reload will be attempted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-4-SRAM_PARITY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Parity Error detected in SRAM.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-LC_RELOAD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A critical errror has been encountered that renders the system unusable.), (Recommended Action: Check if the board comes up fine after the LC reboot. If the board does not recover - it will need to be replaced.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPCP_SRVR-3-RT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error occurs due to the failure in initialization or creation of the event manager.), (Recommended Action: The message should be provided along with following logs for further analysis. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - 'show ipcp trace location <>' - 'show ipcp channel all location <>' - 'show ipcp sap all location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-2-SVC_CRIT
### Response:
(Severity: 2), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-LC_FPGA_ACCESS_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-SRV6_SID_ALLOC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The SRv6 sidmgr API was unable to allocate a requested SID.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-IF_ALREADY_ASSOCIATED
### Response:
(Severity: 3), (Category: L2), (Description: Interface is already associated with logical switch, first remove this association.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_PULSE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while sending the asynchronous pulse to MRIB FGID thread), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-PLA_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The PIO operation on PLIM ASIC failed due to a hardware or software error. The process will automatically respawn up to a fixed number of times to try and recover. %s - description of the error. %d - error number.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-P2MP_TUNNEL
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an error has occurred when processing P2MP tunnel updates.), (Recommended Action: The P2MP tunnel failed to program the tunnel information updates. Please try shutting down and turning on the tunnel source interface with commands (in interface config mode) <CmdBold>shutdown<NoCmdBold> and <CmdBold>no shutdown<NoCmdBold>. If the problem persists after the above two operations, please try restarting the IP Tunnel Execution Agent process with the command <CmdBold>process restart ip_tunnel_ea location <node id><NoCmdBold> If the problem persists even after restarting process, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-INV_MSG_RECV
### Response:
(Severity: 3), (Category: SYSDB), (Description: Message type received is invalid or unknown.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-QNET_NOTIF_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a Shelf Manager has failed to notify QNET of a node state change.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_UNF_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA11 Tx underflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-SESSION_DISCONNECT_FAILURE
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to close session.), (Recommended Action: If you want to close existing session, please run 'clear line' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-BOUNDS
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-DYING_GASP_VRF
### Response:
(Severity: 3), (Category: SNMP), (Description: Dying gasp has been enabled on a host that has VRF which is not yet configured. For such hosts dying gasp trap cannot be generated.), (Recommended Action: Ignore if this message was seen on snmp startup. Configure vrf if it not done already.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN extranet feature?
### Response:
The MPLS VPN extranet feature allows MPLS VPN service providers to distribute routes across VPN boundaries. It enables a VPN to share common routes with other VPNs, providing controlled access between VPNs. Extranet VPNs are implemented by configuring route targets to be imported and exported between VPNs that need to share routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT1_PROTO
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP protocol error on the HT1 interface. This is logged when the HT interface experiences a protocol error on the HT interface.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-7-invalid_historical_file_format
### Response:
(Severity: 7), (Category: OS), (Description: Invalid historical file format.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-LARGE_INSTALL_HISTORY_LOG
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install history logs are larger than the recommended size. Depending on the system and its usage, this can cause replication timeouts during later install operations. By clearing some of the old logs (from install operations unrelated to the current upgrade scenario), these detrimental effects can be mitigated.), (Recommended Action: Clear some of the install history logs from previous upgrade scenarios. Use (admin) 'show install log' to determine which logs are from previous upgrade scenarios, and then use the command (admin) 'clear install log-history oldest <>' to delete the oldest sets of logs. If this message is still seen after the clear operation, then more logs must be deleted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-INTERNAL_STATE
### Response:
(Severity: 7), (Category: SYSDB), (Description: The process has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SIGNAL_OS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APP_OBJ-4-INVALID_ELEM_COUNT
### Response:
(Severity: 4), (Category: MGBL), (Description: The item count in the internal database is inconsistent.), (Recommended Action: Contact TAC with required_info for further diagnosis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-KEEPALIVES
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in the VCM call to set the keepalive state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-3-ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: CCSQ manager encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-6-INFO_INSECURE_FLASH_FILE
### Response:
(Severity: 6), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-3-INVALID_ARG
### Response:
(Severity: 3), (Category: OS), (Description: An application called the API with invalid value.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-PAR_MERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multi bit mem parity error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE4_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE4_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP session down switchover?
### Response:
To configure LDP session down switchover, use the 'session protection for' command under the MPLS LDP configuration. R
P
/
0
/
R
S
P
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-INIT_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: A CPP driver failed to initialize.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-3-NCS1K_PORT_RESET_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates trunk port reset was not successful.), (Recommended Action: The casue of failure has to be analyzed. Collect the show tech logs by running 'show tech-support ncs1k detail' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-ERR_ASIC_SN_LINK
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq ASIC encountered a CpuCtrl CRC/Sync error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-SHMWIN_SIZE
### Response:
(Severity: 3), (Category: OS), (Description: Opened shmwin size is smaller the shmwin header size.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin <window_id> header location 0/x/CPUx - dumpcore running shmwin_svr location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_ECM_REG
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FIA driver encountered an event connection manager error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-GENERAL_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: General error in nvgen client library'), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) Console messages b) show tech-support parser)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a static route?
### Response:
To configure a static route in Cisco IOS XR, use the 'router static' command in global configuration mode. RP/0/RP0/CPU0:router(config)#router static
RP/0/RP0/CPU0:router(config-static)#address-family ipv4 unicast
RP/0/RP0/CPU0:router(config-static-afi)#0.0.0.0/0 192.168.1.254
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-IM_NAME_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-DEFAULT_MBI_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The default MBI is either unknown or missing. The MBI operation in progress may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-FANTRAY_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: One or more fans on indicated fan tray measured RPM below operating level. Remaining fans in operation on this fan tray running at full speed.), (Recommended Action: Verify the failure, give CLI: (admin)# show env --> particularly fan output (admin)# show env trace If the failure does not alleviate after 30 minutes, give CLI: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP dynamic neighbors feature?
### Response:
The BGP dynamic neighbors feature allows peerings to be automatically established based on a listen range rather than being explicitly configured. Incoming connections from peers within the range are accepted and dynamic neighbor entries created. It is configured with the bgp listen range command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_PORT_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-LIB_NOMEM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager DLL was unable to add a new fault condition due to lack of memory. This condition will cause the DLL to exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-4-NETIO_TO_SPP_PULSE_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: The Packet Classifier NetIO plugin hit an error when attempting to pulse SPP to read packets from the shared memory queue. Packets will be dropped until the connection is restored.), (Recommended Action: The problem should resolve automatically if SPP is being restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-PROVISIONING_COMPLETED
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP has successfully applied the configuration fetched from the server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-TRIGGER
### Response:
(Severity: 3), (Category: ROUTING), (Description: An operation failed during log trigger processing. This is not critical and IS-IS functionality should be unaffected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERRRATE_EXCEED_SLOW
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fabric driver encountered the annunciated error. Sysmgr will reload the node up to a fixed number of times the error is encountered, to recover. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-IPSEC_HANDLE
### Response:
(Severity: 3), (Category: IP), (Description: An error is encountered in handling an IP Security packet), (Recommended Action: The returned error provides the type of the error. Based on the error type, the source of the error could be identified.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-WARNING_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace all loc <slot number>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBC-3-CANBUS_B_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CBC detected CANBUS B failure. This may be a serious failure, however the system may continue functioning as expected despite the failure.), (Recommended Action: Reboot the LC. If the problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-7-ERR_SYSDB
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-ASYNC_ATTACH
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS encounted errors when initializing its connection with NetIO.), (Recommended Action: CLNS will restart and try to recover. In case problem re-occur than Please contact cisco-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-SSL_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP Server SSL initialization failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-6-LATE_MGMT_NODE
### Response:
(Severity: 6), (Category: HA), (Description: A management node in the specified SDR came up after SDR Plane ready for that SDR was signalled.), (Recommended Action: Contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_FEAT_CKPNT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize feature checkpoint info. This is needed for checkpointing IPv4 and IPv6 security ACLs programmed in hardware.), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD-6-IFMGR_REPLY_FAIL
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Forwarder was not able to reply to IFMGR notification. Based on the type of notification the traffic flowing through forwarder interface might or might not be affected.), (Recommended Action: If any traffic is affected, restarting forwarder process or ifmgr process might help in fixing the issue. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-INCORRECT_COMPONENT
### Response:
(Severity: 3), (Category: OS), (Description: Received unexpected message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_AHS_LOS_LANE1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_SVR-3-LOCK_NOT_RECOVERABLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to make the mutex in consistent state results in not recoverable state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-PCIE_DEVICE_LOST
### Response:
(Severity: 3), (Category: INFRA), (Description: The PCIe device could not be found, either device is lost or Inreset mode. This could be an Hw issue.), (Recommended Action: Reboot the affected hardware card to determine whether this is a transient failure. Then collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-CRIT_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: FPGA incurred unexpected error, this could be due to hardware configuration issue.), (Recommended Action: The software is not able to recover from this error automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SFP_MUX_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SFP mux[PCA9548] device failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-MAX_GLOBAL_SRVER
### Response:
(Severity: 6), (Category: SECURITY), (Description: Configuration Warning..), (Recommended Action: Please reconfigure based on the recommended values.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key attributes specified in a process startup file?
### Response:
The key attributes in a process startup file include\n- Process name, path, and instance count\n- Startup level (controls start order)\n- Placement (whether process can be started on any RP or LC)\n- Restarting enable (whether sysmgr should restart on failure)\n- Criticality (whether process failure should trigger node restart)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-PAUSED_AT_CONFIG_LOCK
### Response:
(Severity: 6), (Category: INSTALL), (Description: When initiating the operation, the user specified that the install infrastructure should pause before locking the config for the first time. The operation will not continue until the user indicates that it is safe to do so using the supplied command.), (Recommended Action: Either follow the command given, or attach to the operation synchronously for further details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_IM_CNTL_SVR_BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE_CLIENT-3-MQ_SEND_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to send IPC message to IKE process. Most likely casue the process is too busy), (Recommended Action: 'contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. with the exact error message seen')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-7-TLU_WRITE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: INFRA), (Description: The process failed to allocate memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-L2VPN_SAFI_TO_HASH
### Response:
(Severity: 4), (Category: ROUTING), (Description: SAFI to hash conversion failed due to invalid SAFI passed in), (Recommended Action: This msg is info only. At this point BGP and L2VPN will be out of sync Need process restart to achive sync)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_STR_RT_PRM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, PRM error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_CIDRID_SES_LIMIT_NOT_REACHD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID and Remote ID is no longer exceeding the maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-SYSDB
### Response:
(Severity: 3), (Category: OS), (Description: One of the sysdb APIs failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-HOST_WARNING_EVENT
### Response:
(Severity: 4), (Category: DRIVER), (Description: HOST has reported a warning event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COPYMIB-3-ENTRYNONE
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to remove an entry from a queue was made, but the entry was not found.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_RESTART_JID
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-GSP_TRACE_BACK
### Response:
(Severity: 3), (Category: OS), (Description: 'Observed GSP traceback on the console.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SPA_OVERTEMP_SHUTDOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: SPA temperature has risen over shutdown threshold. SPA shutdown commencing.), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-INVALID_ENV_VAR
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Each item in the XR_INTERFACES list must be in the format <XR Interface>:<Linux interface>.), (Recommended Action: Check the format of the XR_INTERFACES environment variable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-MIXED_MEMORY_SHUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The system has attempted to power up the target node. However executing the request results chassis operating in mixed line card memory mode. Node is not powered.), (Recommended Action: Use line cards of same memory configuration in a chassis, or manually bring the card up with 'admin hw-module reload' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_ASIC_SCAN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: An ASIC error which requires ASIC SCAN has occured, the ASIC SCAN will be triggered.), (Recommended Action: The linecard will be booted after the ASIC SCAN is completed, save the ASIC SCAN output files on the linecard local disk, provide the files to TAC support for further debugging. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-IDB_CHKPT_CLEANUP
### Response:
(Severity: 4), (Category: ROUTING), (Description: This is not critical and IS-IS functionality should be unaffected. A non-null OBJID for INTERFACE-NAME was encountered.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the router ID in OSPF and how is it determined?
### Response:
The router ID uniquely identifies each router in the OSPF domain. It is used in the election of the designated router and backup designated router. The router ID is determined in the following order: 1) Explicitly configured router ID. 2) Highest IP address of any loopback interface. 3) Highest IP address of any physical interface.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-4-EXCEPTION
### Response:
(Severity: 4), (Category: OS), (Description: whenever any API is fail due to NULL,any API return NULL or any API fail due to creation of memory using malloc and calloc corresponding traceback is printed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-SYSDB_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some error occured in sysdb operation. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV4_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-EVM_RL
### Response:
(Severity: 3), (Category: ROUTING), (Description: raw_conn not available to send the packet), (Recommended Action: If the condition persist, contact the technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_FWD-4-SYSDB_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Some error occured in sysdb operation. The text of the message displays the failed operation with error code. This message may show up during process restart or node reload events. It is not a concern unless the message is persistent.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISK_DRIVER-4-ATA_NESTED_ERROR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: ATA device might report these errors if it has not been shutdown properly before the RP reload. The device generally recovers of it's own.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the command to activate an installed optional package?
### Response:
To activate an installed optional package, use the `install activate` command followed by the package name. For example\n```\nRP/0/RP0/CPU0:router# install activate disk0:/hfr-mpls-p.pie-3.6.0\n```\nThis command activates the package and makes it part of the running software.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_NETIO-3-ERR_INTF_INIT
### Response:
(Severity: 3), (Category: L2), (Description: The PPP NetIO DLL failed to initialize the datapath for processing PPP packets on a particular interface because of an unexpected error. The message includes the exact cause of the failure. As a result, the capsulation will be unloaded from the interface and the interface will not be able to send or receive any PPP packets. One possible reason for the error is a low memory condition, particularly if the failure was in creating the interface descriptor.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration., and then remove and reconfigure the PPP encapsulation on the interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-MBI_VALIDATION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has failed to validate the mbi path supplied during a boot request.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_ide-5-CARD_INSERT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The pcmcia flash card has been inserted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_1_OFLOW_FIA2BR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-1 FIA to bridge instance-1 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-INTF_BANDWIDTH_LOOKUP_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The ethernet_link_oam_daemon has failed to determine the maximum bandwidth of a particular interface. This makes it impossible to apply link monitor symbol period events if the window units are symbols or frame period events if the window units are frames.), (Recommended Action: Try reentering config - it may be that the failure is transient. If that fails, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE4_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE4_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-4-HC_WARNING
### Response:
(Severity: 4), (Category: IP), (Description: The ipv4_ma process is blocked for more than 2 Mins on some other process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check process blockage in the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_REGISTER_THRESHOLD_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABVQI-1-MODE_CHANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric VQI allocator mode change alert), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-IPV6_COMPRESS
### Response:
(Severity: 3), (Category: OS), (Description: IPV6 compression has failed due to some error. So,lpts entry for that IPV6 address will not be programmed. Automatic process restart will happen. It will impact traffic only for that specific IPV6 address.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_11_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-1-SVC_ALERT
### Response:
(Severity: 1), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_VETHER_DRIVER-3-REPORT_BER_CLEAR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BIP error count is less than the threshold count w.r.t the configured threshold value.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BAD_REFCNT
### Response:
(Severity: 3), (Category: ROUTING), (Description: 'This indicates a internal data structure inconsistency'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-ERR_SYSDB_BAG_DECODE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Failure to decode the bag.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the significance of the 'install update' command in Cisco IOS XR?
### Response:
The 'install update' command in Cisco IOS XR is used to apply interim software updates, such as bug fixes and security patches, to the active software packages.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-HIGH_VOLTAGE_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an CPAK voltage greater than or equal to the high voltage alarm threshold. The CPAK is the pluggable optics on the line cards. The voltage threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_PCALC_FAIL
### Response:
(Severity: 5), (Category: ROUTING), (Description: Path calculation failed for the specified tunnel, LSP and path option.), (Recommended Action: The reported path-calculation error may be investigated if desired. This is a solicited message (controlled by <CmdBold>logging events lsp-status pcalc-failure<NoCmdBold> configuration).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-5-TABLE_PER_PREFIX
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route accounting in a table), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-3-ERR_JOIN
### Response:
(Severity: 3), (Category: IP), (Description: The HSRP process failed to start/stop receiving HSRP packets on an interface correctly. This is an internal error.), (Recommended Action: Retry the configuration on the interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_RX_ALIGN_LOSS_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Rx alignment loss on XAUI to NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_AGORA_ALM_TYPE_FOUR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: AGORA type four alarm.), (Recommended Action: If the problem persists, call your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMA-3-FATAL_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An internal fatal error was detected in CEMA module operation), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-NO_MEMORY
### Response:
(Severity: 7), (Category: OS), (Description: Not enough memory available in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-TX_CH_HI_BIAS_CURRENT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects a high bias current on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption in the downstream.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ACL_REG_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-MEM_ALLOC_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The rpl multi-version coorindator was unable to respond to a 'who has this' request and was forced to ignore the message. This will likely cause a timeout on the client side. If this was the only node with the version of the dll being requested active on it, the client will be unable to access this version. If other nodes have it, the multi-version dll operation will continue. The status of this node remains in uncertain in any case.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INIT-7-MBI_THRESHOLD_EXCEEDED
### Response:
(Severity: 7), (Category: OS), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-INVALID_PATHNAME
### Response:
(Severity: 7), (Category: SYSDB), (Description: A process, likely to be a show command, is attempting to access a sysdb item with an incorrect path string.), (Recommended Action: *DEBUG*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_TABLE_OPERATION
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some type of table related error occurred.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IS-IS advertise a default route and what is the default behavior?
### Response:
The ""default-information originate"" command causes IS-IS to advertise a default route if one exists in the routing table. By default, the route is advertised only in L2 LSPs. Using a route-map or policy-map allows conditional advertisement and advertisement into L1.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-BAD_DOI_SA
### Response:
(Severity: 4), (Category: SECURITY), (Description: The DOI field in a SA offer is needed for message parsing. SA offer with unknown DOI can't be parsed.), (Recommended Action: 'If this situation persists contact the remote peer's administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC-2-PARSE_MEMORY_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: No memory left to parse show output data), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-DATAPATH_INPUT_LEN
### Response:
(Severity: 4), (Category: OS), (Description: Failed to control input buffer length.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_XAUI_PLL_LOCK_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI PLL not locked on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-PACKET_PROCESS_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: This error message implies a severe error condition, likely as result of internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-EDM_ERR_DETAILS
### Response:
(Severity: 3), (Category: SECURITY), (Description: Generic Show TAM Error message - (Error Message - Error Detail - Error Description).), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_SS-7-DEBUG
### Response:
(Severity: 7), (Category: HA), (Description: Debug message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-2-NVRAM_SIZE_ZERO
### Response:
(Severity: 2), (Category: MEDIA), (Description: Possible error during sizing nvram, the NVRAM may not exist), (Recommended Action: 'Check if formatted and present')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-RX_LOSS
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM received an Rx LOS or LF on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Correct the far end or fiber to this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-RW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an internal error. PLA is unable to perform read or write operation. The process will automatically respawn up to a fixed number of times to try and recover. Please check the description . %s - description of the error. %s - failure reason.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-UPGRADE_IN_PROGRESS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that Canbus Controller firmware upgrade is in progress on the specified location. The page that is being presently upgraded is mentioned in the message. This page number would be in the specified range, corresponding to the Canbus Controller partition that is being upgraded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-2-REMOVE_PAIR_OR_NODE_ERROR
### Response:
(Severity: 2), (Category: HA), (Description: Attempt to remove a node from a pair that did not containt the node or it could be an attempt to remove the pair which doesn't exist.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-POWERUP_RETRY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power up has failed, this may be a program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LCAC-4-SHOW_WARNING
### Response:
(Severity: 4), (Category: ROUTING), (Description: The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.), (Recommended Action: Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-4-DEBUG_BACKUP_LOG_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the NPU Driver to indicate that it failed to take up the back up npu logs on reload due to the specified reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-6-ENFORCE_INC
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled with appropriate licenses.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-IM_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the TCP process try to do initialization with ifmgr), (Recommended Action: The process will attempt to recover from this situation by restarting or retrying. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-6-NOT_SUPPORTED_CHASSIS_TYPE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Certain eth_server commands are not supported on the 2 slot chassis.), (Recommended Action: No action is required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_BAD_INTEGER
### Response:
(Severity: 4), (Category: SYSDB), (Description: The user entered integer in unrecognized format or out of range of current integer data type.), (Recommended Action: Correct input value and run command again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO_ETHERLIKE-3-TX_DISABLE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: L2VPN Mgr has signalled at the remote AC has changed state. Due to this the local interface has been enabled/disabled in the TX direction if supported, or enabled/disabled in both directions otherwise.), (Recommended Action: If the remote AC has changed state then this message is expected. If the remote AC hasn't changed state and this condition isn't expected then this may indicate a problem, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700-3-FPD_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CPU Controller FPGA FPD agent failed to initialize. If this error is encountered the CPU Controller FPGA could not be upgraded. The failure should not have an adverse effect on the card's normal operation. %s - description of the specific failure encountered %s - error detail, if appropriate), (Recommended Action: This error is unlikely to occur by itself nor is it likely to be the root cause of the problem. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-4-BUS_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A PCIe bus error has occurred. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_LTH_FIFO_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet length FIFO multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-DESTROY_NOTEMPTY
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-MGR_ACTIVE
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: When VPDN Manager (vpdn_mgr) is either the active process or RPFO occurs, the process initializes active-only services. Something has failed in this proceedure and may prevent VPDN from functioning.), (Recommended Action: Allow VPDN Manager to restart. You can further remove and re-add 'vpdn' configuration. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-STATS_REG
### Response:
(Severity: 3), (Category: FORWARDING), (Description: Failed to register for stats collection. show tunnel-ip X may not display statistics correctly.), (Recommended Action: Restart tunl_gre_ma.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMORB_XMLAGENT-6-RESTART_WAIT_TIMEOUT
### Response:
(Severity: 6), (Category: MGBL), (Description: The xmlagent process is restarting while wait for config operation completion times out. Commit database info may lose), (Recommended Action: just information message, no action is required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP to advertise a default route in IOS XR?
### Response:
To advertise a default route in BGP on IOS XR, you use the 'network' command under the BGP address family configuration. router bgp 65000
address-family ipv4 unicast
network 0.0.0.0/0
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_PRODUCER_LIB-3-MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: The client library has failed to aquire the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MCAST_EDM-5-SYSDB_INIT_FAILURE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The VIKING-MCAST library encountered internal error during SysDB init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp multipath as-path' command in IOS XR BGP configuration?
### Response:
The 'bgp multipath as-path' command is used to enable multipath load balancing over paths with different AS paths. It is similar to the 'bgp bestpath as-path multipath-relax' command, but it allows the installation of multiple paths in the forwarding table even if they have different AS paths. This command is useful in scenarios where there are multiple valid paths to a destination and load balancing over all of them is desired.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVM_CREATE
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA failed to create its Event Manager which is a critical resource for the operation of the process. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-FLEX_ALGO_ENABLED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Flex-Algo defintion is consistent between routers in the area and can be used), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-PKTDROP_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: An input packet was dropped for the specified reason.), (Recommended Action: Such errors are possible during raw_ip restarts. If seen otherwise, these errors should be reported to SUPPORT.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ULOOP_SID_LIMIT_EXCEEDED
### Response:
(Severity: 6), (Category: ROUTING), (Description: ISIS was unable to provide microloop avoidance for a node or prefix because the platform or linecard does not support the needed SID stack depth.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE fast reroute (FRR) feature?
### Response:
The MPLS TE fast reroute (FRR) feature provides link and node protection for MPLS TE tunnels. It enables fast traffic recovery upon link or node failure by using pre-signaled backup tunnels that bypass the protected resource. FRR is enabled on a per-tunnel basis and activated when the primary tunnel fails.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_LQ_OFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 1 LQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq Event Manager create error), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the ingressq driver is up and running by executing the following command at the CLI of the active RP: 'show process ingressq location < >' If it is still non-operational, enable the following debugs of the ingressq driver process: error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events and restart the driver by executing the following command at the CLI of the active RP: 'process restart ingressq location < >' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-FGID_ADD_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-MSG_INVALID_HEADER
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'The message packet header got corrupted ' 'and invalid header received'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CCI_INTR_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot initialize the CPLD interrupts with CCI infrastructure. The node may not be able to handle CPLD interrupts.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-PKT_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: A packet processing error occurred. The diagnostics software attempted to retrieve a packet and an error occurred while doing so. This is not a service impacting error.), (Recommended Action: Check the log ('show logging') to determine if there are any other related error messages. Also, please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area. if the error continues, copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Also collect the information from 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-1-PCH_PROCHOT_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: PCH Prochot error detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XRV9K_FIB-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specific error is encounered during IOX XRv 9000 FIB initialization.), (Recommended Action: Please collect output of the following commands: show log show process blocked location <> show process fib_mgr location <> show cef platform trace all all location <> show process dpc_rm_svr location <> show controller dpc rm trace init location <> show controller dpc rm trace error location <> show controller dpc rm trace event location <> show controller dpc rm trace internal location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_CCTL_POWER_FAULT
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabric FPGA detects the specified power fault. If the failure is for the LTC2978 device, then this error is due to the failure of the cctl library function call.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_AIB_ZERO_ALL
### Response:
(Severity: 3), (Category: ROUTING), (Description: We were not able to set all cached adjacencies to zero when we got ELIBBAD from AIB), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-BUNDLE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install activate commit command in IOS XR?
### Response:
The 'install activate commit' command is a combination of 'install activate' and 'install commit'. It activates the specified packages and commits them as the persistent set in a single step.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-SETPRIO_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Changing acctd priority failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-RELEASE_LOCK_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to release shared memory lock.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-SYSADMIN_VM_FATAL_EVENT
### Response:
(Severity: 3), (Category: DRIVER), (Description: SysAdmin VM has reported a fatal event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-ENGINE_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the platform VPLS process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_FWS_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to initialize its storage for forward-referenced interfaces. This is may be due to lack of resources or an internal error (the error message will indicate which). It requires a restart of the process for recovery.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-CLUSTER_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The cluster is configured without the necessary cluster license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-TRANSCEIVER_INSERTED
### Response:
(Severity: 6), (Category: L2), (Description: This informational message indicates that the optic interface module was inserted on the given interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-SYSDB_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The sysdb error occurs for the following reasons - SPA Infrastructure SysDb error - Event manager not created - Trying to use uninitialized debug event - Unable to get CPU nodeid), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message during initializing one of FPD processes.), (Recommended Action: File a DDTS)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NSR_PACKET-3-EVENT_TRACE_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message tells is the ltrace initialization for event traces has failed and prints the error string.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-MAX_PFX_LIMIT_CHANGE
### Response:
(Severity: 4), (Category: ROUTING), (Description: User has configured a maximum-prefix limit which is higher than the previous maximum prefix limit. The current accepted prefix count matches the old maximum-limit. Its possible that certain prefixes were dropped previously. To rebuild state for those prefixes upto the new maximum-limit, user needs to reset the session if neighbor does not support route-refresh), (Recommended Action: Reset the neighbor session if neighbor does not support route-refresh)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-2-CPU_FAILURE_ALERT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: One or more the CPUs in the card is not detected or having errors.), (Recommended Action: Please report the problem to your Cisco technical representative:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-6-HW_MOD_PROF_ACL_FRAG_MANDATORY
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message will typically occur when the fragment filter field is missing from the IPV6 User Defined Key.), (Recommended Action: Add the fragment filter to the IPV6 User Defined Key for this linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-DEV_CPAK_OPTICS_PORT_UNSUP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A CPAK Module not supported for the port error was detected during CPAK initialization. A CPAK Module not supported for the port error is reported when Optics is not supported on the port. The CPAK is the pluggable optics on the line cards. CPAK initialization may happen when linecard boots up, CPAK OIR and line card process restart. Traffic will not be impacted by this error.), (Recommended Action: Verify that the CPAK Module is supported for the port. Replace the CPAK with a working one (if any) to isolate bad optics. Check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the command 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-4-QUEUE_RED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a warning indication that a queue length is growing in a dpa client), (Recommended Action: Please collect the console log, OFA traces (show dpa trace loc <>), Also notice if the error message is transient or persistent.Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The system has run out of memory'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-WINDOW_TOO_SMALL
### Response:
(Severity: 4), (Category: L2), (Description: There is an allowed range for window size in milliseconds. When window size is specified in frames or symbols, its length in milliseconds depends on the maximum bandwidth. In this case, the configuration results in too short a window. The mimimum window size is being used for this event instead.), (Recommended Action: Consider changing the relevant configuration (i.e. the window size).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-3-ERR_QAD_NOTIF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get the qad notification of queue depth above or below watermark. This normally indicates there is some issues with the qad queue %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_AIB-3-SHM_PIT_NULL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PIT shared memory is NULL, couldn't open shared memory.), (Recommended Action: Please contact TAC Support Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-4-OOM_STATE_THROTTLE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-FM_ADD_FEAT2GRP
### Response:
(Severity: 3), (Category: OS), (Description: An internal fm add feature to group function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-OLD_CMD
### Response:
(Severity: 4), (Category: ROUTING), (Description: The command has been replaced by a newer command.), (Recommended Action: Use the new command inidicated in the message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-4-PCI_NOLATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Error was observed on the system PCI bus for which detailed infromation was lost due to more errors or some other reason.), (Recommended Action: Check if there are any asic errors or asic drivers restarts observed around this error. Check if process 'pci_bus_mgr' is up and runnning. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-INIT_FAIL
### Response:
(Severity: 3), (Category: MEDIA), (Description: Error while trying to init, sanitize nvram during NVRAM initialization.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The PCIe server has detected an error condition. The message has the error information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-7-PDMA_DEBUG_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: %s- debug info. %s- function name. %d- line number.), (Recommended Action: debug info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-6-QUEUE_GREEN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an indication queue length is back to normal for ofa client), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_AGENT-4-INIT_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: An error was encountered while the Feature Agent was initializing. Feature capability information may not be available. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-BAG_CREATE_ERR
### Response:
(Severity: 4), (Category: SYSDB), (Description: Error creating bag), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-CIS_DATA_PARSING_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: CIS data parsing error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-ERR_THREAD_MUTEX_UNLOCK
### Response:
(Severity: 4), (Category: FABRIC), (Description: FSDB encountered an error while locking unlocking a mutex to access the specified shared resource. The operation related to the resource may be affected while the process continues to run normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_ACCESS_IF_SES_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on the access interface has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-KDUMP_TIMEOUT
### Response:
(Severity: 3), (Category: DRIVER), (Description: The creation of the host kernel core file has timed out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the SESVI EA process on a particular node. The process will be restarted. Until the process starts successfully, any SESVI interface located on that node will not come up. (If there is a standby node the interfaces should come up on the standby).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-INVALID_DEBUG_FLAG
### Response:
(Severity: 3), (Category: SECURITY), (Description: The debug flag specified is not supported.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_LOCAL-3-PROC_INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during initialization with a necessary service for the process. The process is unable to run.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-BACKUP_FPD_LOADED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The Backup Set of FPD images on CCC Bootflash has been loaded on the indicated card. The output of 'show hw-module fpd' will show the affected images with BACK IMG state. This can happens when CCC detects that one of the Primary image set is corrupted, so it fallback to load the backup image set to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for CCC to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-GET_MY_NODEID_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get the nodeid which results in exit of the DSC process , the process will respwawn itself.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BVI_MA-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An unrecoverable error has happened while initializing BVI MA process. bvi_ma will be restarted automatically. BVI interfaces may get created later.), (Recommended Action: The process should recover automatically. It is suggested to collect 'show tech-support l2vpn' and to call Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-REG_SEC_CONTEXT_EXISTS
### Response:
(Severity: 7), (Category: SYSDB), (Description: Sysdb is attempting to add a registration that already exists in its secondary registration context. This will cause a sysdb server restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-BADDLSYM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Cannot resolve symbols for the interface function. Probably function not defined in DLL. Will exit to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in the OBFL process, but there is not corresponding error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-CALLING_PLATFORM_RELOAD_NODES_ALL
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install manager needs to call the platform API to reload the router to complete the parallel install operation. If the call fails, the user may have to call: reload location all in admin mode.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-6-ERR_ASIC_EOP
### Response:
(Severity: 6), (Category: FABRIC), (Description: Fabricq ASIC encountered a Unicast/Multicast Unexpected/Missing End Of Packet error), (Recommended Action: If the problem persists, *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-EVM_FD
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to get the file descriptor associated with an event manager connection failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSPI_PROT_SEQ_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RxSPI protocol sequence error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-NODE_RESET_BRINGDOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being reset because it failed to detect heartbeat pulses. Please check for any reboot reasons for the node printed on the console or shown in the show reboot history reverse CLI.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-6-PA_FF_RESET
### Response:
(Severity: 6), (Category: OS), (Description: An internal error was detected when trying to reset the BCDL group for the LPTS Port Arbitrator/Flow Forwarder.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-3-CONFIG_REMOTE_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The set of primary or secondary VLANs on a bundle interface of the iccp-group does not match the secondary or primary set of VLANs for the same bundle interface on the other member of the redundancy group.), (Recommended Action: Verify the configuration under l2vpn redundancy. Ensure that the primary and secondary set of VLANs for a specific bundle interface is the reciprocal of the primary and secondary set of VLANs on the same bundle interface on the other member of the redundancy group.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-4-GLOBAL_OPERATION_STALLED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An Interface Manager or Config Manager operation has been retrying unsuccessfully for and extended period of time - retries will continue until the operation is successful or the operation is cancelled. This issue is most likely to occur if there has been an attempt to configure the feature beyond supported scale or with other invalid parameters. Until this is resolved then the programming of the affected interface(s) may be incorrect.), (Recommended Action: If this is seen following a change in system configuration that results in the feature exceeding the supported scale then remove the configuration and restart this process. If the system has not been configured beyond the supported scale then seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-BGCOPTIONMISSING1
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The input is invalid. The calling function and the command are displayed'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR_HELPER-4-SYSDB_ERROR
### Response:
(Severity: 4), (Category: MEDIA), (Description: An unexpected sysdb error condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-PROCHOT_INTR_ENABLE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCH Prochot intr enable failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-ERR_INIT_MODULE
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: System Admin Manager failed to initialize specified module when system is starting.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-ERR_SYSDB_DISCONNECT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The process failed to disconnect from system database. The error will not affect operation but does indicate that a programming error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-3-NO_CONFIG
### Response:
(Severity: 3), (Category: OS), (Description: No configuration for IFIB flow handling was found. Default characteristics will be used for all packets.), (Recommended Action: A healthy running box, should not hit this point. Provide the following log: Collect Console logs and output of -show memory summary -show memory heap summary all -show tech-support lpts)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-OVERSIZED_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: An attempt was made to allocate an oversized message during update generation. This is usually due to the presence of large sized attributes for one or more prefixes. When such an error encountered, a Withdraw message is generated for the prefix under consideration.), (Recommended Action: Please check the attributes of the prefixes in the afore mentioned table.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-INTERNAL_TUPLE_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: This is an internal software error. Tuple-Type: The retrieved datatype for the given SysDB tuple does not match the expected datatype. Bad-host: Received a tuple for the snmp-server host CLI command, but could not parse it. Unpack: Failed to decode/unpack the retrieved SysDB tuple value.), (Recommended Action: Try to re-apply the config , if still seen the error message contact technical suppport representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-NULL_PTR
### Response:
(Severity: 4), (Category: INSTALL), (Description: Unexpected parameter value passed to function.), (Recommended Action: An internal error has occurred in an application that has caused it to pass invalid data to the boot-variable infrastructure. The operation in progress may not be carried out. Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-6-OPCODE_NOT_SUPPORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that a client of the LDA server requested an operation that is not implemented for this card type. The message may provide informational value, if there are other unexpected behaviors observed.), (Recommended Action: No action is required for this message. It only provides information that an unsupported message has been sent.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-CHKPT_OP_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: A check point operation failed in packet manager.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-6-RX_ALL_CH_LOP_ERR
### Response:
(Severity: 6), (Category: FABRIC), (Description: The Rx POD detects LOP signal on all channels. Please check sh controllers fabric pod health <> <> <> to confirm the same.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLEAR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Memory allocation failure'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VEEA-1-INVALID_MTU
### Response:
(Severity: 1), (Category: PLATFORM), (Description: A failure occurred during the setting up MTU on the interface. Platform allows only 3 MTU values to be setup on the interfaces within an NPU. Configure MTU on the interfaces with allowed values.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_23
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-FILE_OPEN
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to open the file), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_0_PKT_MAXLEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on FIA to NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ERR_THREAD_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver failed to create the identified thread during driver initialization.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-PCI_BUS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A PCI bus error has occurred. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-4-WARNING
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: A warning codition has been detected.), (Recommended Action: If this message is not repeating, no actions are needed. If this message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-BAD_RSVP_MSG_RCVD_AUTH_DUP
### Response:
(Severity: 5), (Category: ROUTING), (Description: The router received an RSVP message with an authentication sequence number that has already been seen. RSVP discarded the message because an untrusted source may be (unsuccessfully) attempting an RSVP message replay attack.), (Recommended Action: If you can verify that the source is trusted, it is possible that the source has rebooted and its clock has gone backward in time; in this case, the source should be configured to synchronize its clock with an NTP server. Otherwise, the sender could be an untrusted source (unsuccessfully) attempting an RSVP message replay attack; try to find and disable the untrusted source.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-SVC_INFO_DUMP
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information being displayed for debug purpose.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-3-INIT
### Response:
(Severity: 3), (Category: SNMP), (Description: This is indicates the udp process Initialization failed . This could be due to a low memory condition or an internal software error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-FPGA_IMG_FAIL
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM is running wrong/unsupported FPGA image. This could be caused due to 1. Previous FPD updgrade failure. 2. Card is moved from 200G slot to 400G slot %d - 3/4), (Recommended Action: Upgrade the FPGA with FPD CLI. 'admin upgrade hw-module fpd fpga[3/4/5] location 0/x/CPU0')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_OPM-4-MEMBER_INCONSISTENCY
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An ICCP redundancy group which is being used for satellite multi-chassis redundancy has been given multiple members.), (Recommended Action: Correct the misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure static routes in MPLS L3VPN VRF?
### Response:
To configure static routes in an MPLS L3VPN VRF, use the 'vrf' command in router static configuration mode. router static
address-family ipv4 unicast
vrf MyVRF
0.0.0.0/0 192.168.1.254
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700-0-INTR_INIT_FAILURE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The CPU Control driver failed to initialize interrupt processing. The effect is that the line card may not function or may not function appropriately. The CPU Control driver provides low level services on the SIP 700 Line Card (LC). These include, among other things, access timeout interrupt services and bus parity error interrupt services. If these services are not available then the driver process is exited, respawned and the initialization retried. The CPU Control driver is a mandatory process. If the initialization continues to fail after several retries the LC will not properly boot and will reset itself. This error is generally indicative of a larger LC-wide problem. %s - description of the specific failure encountered %s - error detail, if appropriate), (Recommended Action: This error is unlikely to occur by itself nor is it likely to be the root cause of the problem. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_EVENT_BLOCK_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: event_block failed. This indicates process has encountered unexpected error while waiting for events.), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-2-NORESOURCE
### Response:
(Severity: 2), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPI4_INTERRUPT_CNTRL
### Response:
(Severity: 4), (Category: L2), (Description: Failed to enable/disable interrupts on the specified SPI4 link), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. before reloading the line card If this problem persists, reload the line card using <CmdBold>hw-module location <>/<>/CPU0 reload<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-3-CORRUPT_FILE
### Response:
(Severity: 3), (Category: MEDIA), (Description: The specified File is corrupted on Primary Boot Device.), (Recommended Action: Run 'install verify packages repair location <>' for respective node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_OAM-2-IM_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Error in IM(Interface Manager) operation %s - Type of error %s - reason for the error This error happens on the LC with ATM interfaces), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. restart the atm_oam process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-5-BOARD_RESTART
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The FPGA Manager api for resetting the board via a control register has been called by the process with the specified PID.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-6-CODEP_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: LMI parameters N392 and N393 are co-dependent - they must obey the rule N392 <= N393. Sometimes when one is changed the other must be changed as well to keep the protocol functioning properly.), (Recommended Action: None. This is not an error, just a notification.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-GRACEFUL_SHUTDOWN
### Response:
(Severity: 6), (Category: ROUTING), (Description: Informs user of graceful shutdown events. User needs to be aware of these activities.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-BAGS_UNREG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_EVENT_CONN_OPEN
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to open connection with event manager. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-MPLS_LABEL_OR_TUNNEL_OP_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An attempt to do an mpls operation failed.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-UNSUPPORTED_FEATURE
### Response:
(Severity: 4), (Category: OS), (Description: The feature is not supported by OBFL.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-PORT_CONTROL_UPDATE
### Response:
(Severity: 5), (Category: L2), (Description: Dot1x port control host mode is updated.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_REX-3-MEM
### Response:
(Severity: 3), (Category: SERVICES), (Description: During processing of a new or updated diversion, insufficient memory was available. The diversion information was not applied, and future updates may also not be applied correctly.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Once the memory condition is resolved, execute the command 'proc restart rspp_rex' for the node where the error message originated to ensure all diversion information is correctly set up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-3-NCS1K_REPROV_ABORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Provisioning of specified slice has aborted during hitless restart due to an issue in accessing the hardware. Current priovisioning state of the slice is unknown.), (Recommended Action: The casue for the provisioning failure has to be analyzed. Collect the show tech logs by running 'show tech-support ncs1k detail' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_STR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in stats infra component. The error string gives the reason for the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-ERROR_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS could not initialize its error code. CLNS will work, but error messages won't be user friendly!), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-PLATFORM_FILE
### Response:
(Severity: 3), (Category: OS), (Description: Problem opening/reading from the platform shmwin file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Check the platform shmwin file under /etc/platform_shmwin. Include the /etc/platform_shmwin file information in the ddts.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-PA_ERROR_MSG
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Syslog PA errors.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_RESTORE_LOG_ENCODE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GETMEDIA-6-DEVFILE_READ_FAILED
### Response:
(Severity: 6), (Category: MEDIA), (Description: The qsm application device file was unavailable. Default boot device will be used.), (Recommended Action: This message is informational only. Report this message to TAC only if the router malfunction after the message. Capture the console log and show media output)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV6_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-6-START
### Response:
(Severity: 6), (Category: OS), (Description: dump_core or dump_core_suspended will start.), (Recommended Action: This message is information only. dumping of core will start now.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card whee the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> show cef platform trace ipv4 all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-UNKNOWN_CHASSIS_ID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The value read from the EEPROM does not match any of the known Controller/platform type values.), (Recommended Action: Please check the EEPROM programming. 'show diag eeprom-info' in admin mode gives a raw dump of the EEPROM data. Refer EDCS-137763 to interpret the data to check if the Controller/Platform type is programmed correctly or not. If the Controller/Platform type is incorrect, the unit will have to be RMA'd to reprogram the EEPROM correctly. If the Controller/Platform type is correct, EEPROM read is failed due to unknown reason, Its Recommended to Hard OIR of the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE7_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE7_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-SHMEM_INIT_FAIL
### Response:
(Severity: 3), (Category: MEDIA), (Description: Error while trying to create/open a shared memory file for nvram backup during NVRAM initialization.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-NSF_CHKPT_TABLE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred whilst IS-IS was accessing the specified checkpoint table. If this error occurs during an NSF Cisco restart then that NSF restart may be aborted in favour of a traditional restart. If this error occurs during normal operation then the relevant checkpoint table may not be correct, and a subsequent NSF restart may not succeed. The error may be caused by a low memory condition or through programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-OUT_MEM_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an output memory error on link 2), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_5_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MCAST_NETIO_DEBUG-6-TERM_ERR
### Response:
(Severity: 6), (Category: ROUTING), (Description: Internal non-serious error. Mcast netio debug library termination failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-DBG_TCAM_LIB_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot initialize the Debug TCAM library. The node may be not be able to use the debug TCAM to debug cell flows through the fabric ASICs.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAAD-3-PASSWORD_FILE_PERMISSION
### Response:
(Severity: 3), (Category: MGBL), (Description: This error comes when there is issue with spawning the bash, bash shell itself is not present), (Recommended Action: The issue should be recovered when retrying login, if this message keeps on coming please collect required log)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SKYWARP_NETIO_LIB-4-FINT_IDB_NOT_FOUND
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The FINT idb is not yet created in netio. This could be a transient condition.), (Recommended Action: Please capture the following information and check if FINT is created in one of the outputs on the node. If so, it was a transient error. show netio trace all loc <> sh netio idb FINT loc <> sh im trace interface-existence loc <> Else, please capture the following information and if traffic loss also is being observed Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked sh im trace loc <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IM_CAPS_REMOVE
### Response:
(Severity: 3), (Category: L2), (Description: CDP could not uninstall the CDP capsulation on the specified interface and hence CDP may be in an inconsistent state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-HW_INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the LC hardware in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-MSG_CHAN_CONN_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to attach handler for sync messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATSD-5-CFG_REG_FAILED
### Response:
(Severity: 5), (Category: MGBL), (Description: Any updates that are made to the Service Accounting statistics polling interval configuration will not be implemented by this collector. The collector will continue to use whatever statistics polling interval was configured at the time this message was seen.), (Recommended Action: Restart the affected collector process before applying any new Service Accounting configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC8
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-TABLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred that prevented the FIB from working with multiple tables.), (Recommended Action: Try restarting the FIB process to see if the problem goes away. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR-7-ERR_EXIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An error occurred in crossbar driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-0-CPU_ERR1
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Indicates non-fatal error (operating system or firmware action required to contain and recover). This error message is thrown after observing non-fatal error at the LC CPU.), (Recommended Action: Reload the LC that has the problem. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MLACP_BDL_SYSID_IGNORED
### Response:
(Severity: 6), (Category: L2), (Description: When running mLACP on a bundle, the system ID must be common on both devices, so cannot be configured on a per-bundle basis.), (Recommended Action: Remove the system id configuration, as it has no effect when running mLACP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-5-OIR_INSERTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-MGR_INIT
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: When 'vpdn' configuration is first added, the VPDN Manager (vpdn_mgr) process starts and initializes. Something has failed in this proceedure and may prevent VPDN from functioning.), (Recommended Action: Allow VPDN Manager to restart. You can further remove and re-add 'vpdn' configuration. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IPV6_REGISTRATION
### Response:
(Severity: 3), (Category: L2), (Description: CDP registration with the IP address library has failed. This means that IPv6 address information for interfaces local to this node will not be included in outgoing CDP packets. The neighboring devices will not see the IPv6 address information for this router's interfaces.), (Recommended Action: Restarting CDP as the address consumer, or the ipv6_ma as the address provider on this node may rectify the problem. proc restart cdp location <location of failure> or proc restart ipv6_ma location <location of failure>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-LINUX_LOOPBACK_ADDRESS_RESYNC_FAIL
### Response:
(Severity: 4), (Category: INFRA), (Description: XLNCd is responsible for keeping the networking stacks for IOS XR and Linux synchronized. Certain IOS XR interfaces only have L3 reachability, provided by having their IP addresses added to the Linux loopback device in the network namespace corresponding to the IOS XR VRF the address is configured in. This message indicates that XLNCd was unable to query Linux to determine the current set of Linux loopback IP addresses after a process restart. This may result in the wrong set of IP addresses being set on the Linux loopback device, for example if the required set of IP addresses changed while XLNCd was restarting.), (Recommended Action: If the system is experiencing memory exhaustion, resolve other issues that may be causing this failure state, then attempt to recover by restarting XLNCd: <CLI> process restart xlncd </CLI> If the problem persists, inconsistencies between Linux and IOS XR can be observed by comparing the output of <CLI> show linux networking interfaces address-only </CLI> for the IOS XR VRF and <CLI> run ip netns exec <netns-name> ip addr show dev lo </CLI> IPv4 addresses that are missing from Linux can be added using <CLI> run ip netns exec <netns-name> ip addr add <ip> dev lo </CLI> Extra IPv4 addresses can be removed from Linux using <CLI> run ip netns exec <netns-name> ip addr del <ip> dev lo </CLI> IPv6 addresses that are missing from Linux can be added using <CLI> run ip netns exec <netns-name> ip -6 addr add <ip> dev lo </CLI> Extra IPv6 addresses can be removed from Linux using <CLI> run ip netns exec <netns-name> ip -6 addr del <ip> dev lo </CLI> Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LASER_CASE_TEMP
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_IM_BULK
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-3-MISS_MEM_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing mem_info while processing error interrupt.), (Recommended Action: Error at the memory location will not be corrected in this case. Need add this information to parser generated file *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-4-ACE_SYSLOG_WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: ACE SPA SYSLOG message), (Recommended Action: 'If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFD_HELPER-5-SYSADMIN_COMMIT
### Response:
(Severity: 5), (Category: MGBL), (Description: The sysadmin configuration was modified.), (Recommended Action: No futher action is necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_3_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-1-UPGRADE_COMPLETE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The given FPD upgrade is complete.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-CHASSIS_IDPROM_READ
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA driver was not able to retrieve a valid chassis IDPROM image from backplane. This failure will prevent applications that requires a valid chassis serial number from operating correctly.), (Recommended Action: Perform RP fail over to see if the other RP has the same problem. If problem persist, try to power-cycle the chassis to recover from the failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_4_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-7-ERR_CLIENT_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: CCSQ Manager client Registration/Unregistration error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE6_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE6_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure OSPF as a PE-CE protocol in MPLS L3VPN?
### Response:
To configure OSPF as a PE-CE protocol in MPLS L3VPN, use the 'vrf' command in OSPF configuration mode. router ospf 100
vrf MyVRF
area 0
interface GigabitEthernet0/0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-MANDATORY_OFF
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-DSC_CONN_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to connection failure to DSC for satellite boxes. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_UCORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE uncorrectable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-lsp_update_peer_absent
### Response:
(Severity: 3), (Category: OS), (Description: Unable to update LSP due to absense of LSP), (Recommended Action: Check LSP name specified in EXEC CLI)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you deactivate a software package in Cisco IOS XR?
### Response:
A software package can be deactivated in Cisco IOS XR using the 'install deactivate' command, which disables the package's features on the router without removing the package.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to disable RSVP on an interface in Cisco IOS XR?
### Response:
To disable RSVP on an interface, use the 'no mpls traffic-eng interface' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#no mpls traffic-eng interface GigabitEthernet0/0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_BDI_DEMC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-LSPCKSUM
### Response:
(Severity: 4), (Category: ROUTING), (Description: Bad L-# LSP LSP-ID checksum ACTUAL-CKSUM received on INTERFACE-NAME, length PDU-LENGTH should be EXPECTED-CKSUM, bad count CKSUM-ERROR-COUNT. This system received a level L-# LSP with a wrong checksum. If the IS-IS configuration option 'isis-ignore-cksum-errors' is set, the packet has been ignored. Otherwise it has been handled according to the specification.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_4_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-RWLOCK_DESTROY
### Response:
(Severity: 3), (Category: OS), (Description: Failed to destroy read write lock.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-GEN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-4-DEBUG_EVM_CREATE
### Response:
(Severity: 4), (Category: OS), (Description: QNET process tried to create debug evm but encountered error specified The process may not be able to handle debug events), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_BAG_DECODE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-ERR_PEER_NOT_ISOLATED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Peer RP/SC is not isolated after node crash. The crash node will be reset automatically), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_PKDTUPLEFILE
### Response:
(Severity: 5), (Category: SYSDB), (Description: An error occurred during a read operation from the instruction file.), (Recommended Action: Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-SDK_POSIX_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a message in FIB platform to indicate that engine layer identified an error while programming an object in SDK.), (Recommended Action: Please collect the console log, show tech-support cef platform. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_ENABLE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The driver failed to enable/disable inter-process communication with fgid_server. This will prevent ucd/mcd messages to be exchanged between fgid_server and driver.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-7-ERR_MEM_ALLOC
### Response:
(Severity: 7), (Category: FABRIC), (Description: FSDB has failed to allocate memory for its resources. This would affect proper functioning of fabric.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_MGR_COMMON-3-OBFL_DEV_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: obfl_mgr process failed to access OBFL device. This could be because of hardware related failure.), (Recommended Action: Need to collect the logs related to obfl_mg from the node where this issue is reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_LOCAL_REG_READ
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected a local register read error.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700-3-EDM_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CPU Control driver failed to initialize External Data Manager (EDM) processing. The effect is that the CPU Control driver show commands are not functional. This means that display information used by customers and Cisco support to monitor the CPU Control device may not be available. This does not impact normal CPU Control device operations. In particular, this failure would impact the 'show controllers CPUCtrl a9k-sip-700' commands. %s - description of the specific failure encountered %s - error detail, if appropriate), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If CPU Control display output is required then the cpu_ctrl process can be restarted on the LC in question using, <CmdBold>process restart cpuctrl location <>/<>/CPU0 <noCmdBold>. This process restart may or may not result in successful EDM initialization depending upon the underlying problem. Note that it is unlikely that this failure would occur by itself. This failure is generally indicative of a larger LC-wide problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-7-ERR_EXIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An error occurred in ClkCtrl Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-MEM
### Response:
(Severity: 3), (Category: MGBL), (Description: The VTY DLL has failed to acquire the required amount of memory), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key components of the IOS XR Install Manager architecture?
### Response:
The main components of the Install Manager architecture are\n- Install Manager (instmgr): Runs on each node, responsible for package management and installation\n- System Manager (sysmgr): Manages the startup and monitoring of processes\n- System Database (SysDB): Stores install-related states and information\n- Inventory Manager: Keeps track of cards in the system\n- Shelf Manager: Monitors and controls hardware on each card\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-3-IM_CONNECT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The VLAN MA process failed to connect to the IM server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_AIS_DEMA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_INTF_DETECTED
### Response:
(Severity: 4), (Category: OS), (Description: The punt flow trap sampler detected an excessive flow on an interface. This could result in a denial of service to other interfaces. The interface will be placed in a 'penalty box' and policed at a much lower rate for a specified time period.), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REP_COM_REMOVE_TRIGGER_FAILURE
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install remove inactive all as part of the replace operation couldnt be triggered.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE_ERR_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE_ERR_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_XAUI_RDY_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-1 XAUI not ready on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-SW_COOKIE_UPDATE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR install infrastructure has failed to update its software cookie on a particular node. This cookie is used to verify that software on different nodes in the system is in sync.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-EVENT_CONN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_PLU-1-PLU_RESMON_OOR_RED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: PLU resmon on the node has detected that the number of routes has exceeded prescribed limits. Any further increase routes will lead to traffic loss.), (Recommended Action: Take immediate action to delete routes from the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-1-SINGLE_FEED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Single feed mode configuration changed, if enabled no warnings will be generated if one DC module feed is not connected or voltage is out of range'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_L2TP-6-INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the platform L2FIB L2TP component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_9_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-PACKAGES_RECORD_FILE_CHANGED
### Response:
(Severity: 4), (Category: INFRA), (Description: The file that is used by the install infrastructure to record the active/committed packages for the duration of an atomic change/transaction has been altered since it was written by the install infrastructure, either by mistake or as a result of an attempt to falsify the active/committed packages information. This may cause the information in the active/committed packages lists to be inaccurate.), (Recommended Action: Ensure that only authorized people have access to the router. If the active packages file has been changed, apply or abort the atomic change to see accurate information about the active packages. If the committed packages file has been changed, commit or roll back the current transaction to see accurate information about the committed packages.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-SET_RLIMIT_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed to set resource limit. Dumper process will restartils.), (Recommended Action: Please restart the process dumper.If the issue persists then, Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show memory)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-6-PERFMON_ENABLED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The user is attempting enable/disable the performance monitoring feature. But the feature is already enabled/disabled.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_0_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-INVALID_ROLE_STATE
### Response:
(Severity: 3), (Category: LICENSE), (Description: From the last role event, we can only move to certain roles. The device has moved to a role which the Smart Agent cannot follow.), (Recommended Action: Please check the smart agent syslog file for more information. Please turn on the smart agent debug mode and retry again for additional information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-IFH_READ_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Service Platform Manager encountered an provisioning info.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NQC-3-PAK_OPERATION_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: The specified operation failed on the packet.), (Recommended Action: Collect the information specified in the required_info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PORT_STATE_CHANGE_ADMIN_DOWN
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message indicating that the admin state of the specified port has changed to down.), (Recommended Action: This is an informational message and does not necessarily indicate a problem. This message is expected when the port's admin state is changed via CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-MODULE_UNAVAILABLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Module was unavailable to be accessed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is inserted properly if it is externally accessible. Capture 'show media' and 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EEM-6-ACTION_SYSLOG_LOG_INFO
### Response:
(Severity: 6), (Category: HA), (Description: The action_syslog call from tcl script.), (Recommended Action: Please verify command(s) mentioned in tcl script prior to error message are working fine (on router prompt). If issue is still seen then please provide command details which has resulted into this error condition to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-ING_INV_LEN_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Invalid ingress NPH length detected on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-GEN_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An IPV4-specific software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an MPLS label switch path in IOS XR?
### Response:
To configure an MPLS label switch path (LSP), use the 'mpls traffic-eng' commands within router configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng
RP/0/RSP0/CPU0:router(config-mpls-te)#interface GigabitEthernet0/0/0/1
RP/0/RSP0/CPU0:router(config-mpls-te-if)#autoroute announce
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-2-SHM_INIT
### Response:
(Severity: 2), (Category: L2), (Description: L2fib shared memory initialization failed because server failed to map shared memory. If shared memory is not initialised, it can result in wastage of shared memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE_STR_HEX
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MCAST_PAGE_ERR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multicast page error on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLCDLL-3-ERR_DEBUG_REGISTER
### Response:
(Severity: 3), (Category: L2), (Description: There was an error registering the cHDLC Netio debug with the debug library. No debug will be available for the cHDLC Netio DLLs.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-3-FIELD_GROUP_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OFA failed to create field-group on this NPU.), (Recommended Action: Verify your hw-module configuration. Otherwise, collect show-tech and contact cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-6-LTRACE_INIT_FAIL
### Response:
(Severity: 6), (Category: QOS), (Description: Ltrace initialization failed within EA. Ltraces may not be printed), (Recommended Action: Try restarting QoS EA process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: The system is low on memory and not enough was available to complete the request), (Recommended Action: Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-ISSUMGR_MILESTONE_ERR_RC
### Response:
(Severity: 3), (Category: ROUTING), (Description: An external software error was returned form issu mgr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The issu milestone update API for milestone start/met has returned error. This may be transient error, and the API will be retried. If repeated, please collect the output of the following commands: - show tech-support routing ospfv3 - show tech-support issu)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-2-MIDPLANE_DAT_FILE_PARSE_FAIL
### Response:
(Severity: 2), (Category: FABRIC), (Description: FSDB server failed initialization with above reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAOC768-3-ASIC_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An ASIC error occurred in PLAOC768 ASIC which is reported here.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TTY_DETAILS
### Response:
(Severity: 3), (Category: MGBL), (Description: tty_details_from_device_file() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-CPU_PROTOCOL_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter driver detected a protocol error from the CPU), (Recommended Action: The error message indicates illegal CPU bus handshake protocol, contact support if the error message persists after a few reloads of the card by either 'hw-module location <> reload' or OIR of the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different Inter-AS MPLS VPN implementation options?
### Response:
The main Inter-AS MPLS VPN implementation options are\n- Option 1: Back-to-back VRF (virtual routing and forwarding) connections at the AS boundary routers\n- Option 2: EBGP redistribution of labeled VPN-IPv4 routes between the AS boundary routers\n- Option 2a: EBGP redistribution of VPN-IPv4 routes with next-hop-self\n- Option 2b: EBGP redistribution of VPN-IPv4 routes with redistribute connected\n- Option 2c: EBGP redistribution of VPN-IPv4 routes between loopbacks\n- Option 3: Multi-hop EBGP redistribution of labeled VPN-IPv4 routes between route reflectors\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-6-HA_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: Information related to HA events like NSR readiness.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CARD_RELOAD_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that shelfmgr has failed to reload the specified node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-SCH_1_HANG_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Scheduler 1 Hang on bridge instance-0.), (Recommended Action: Please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_BOARD_PLD_VERSION
### Response:
(Severity: 3), (Category: FABRIC), (Description: This indicates that the fabric board is running with PLD version that is not supported. Version lower than (0x1c) is not supported. Please upgrade to the latest PLD Version.), (Recommended Action: Shut down the plane associated to this fabric card, and upgrade the PLD Version of this board. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACL_COMPRESSION_NOT_SUPPORTED_MASK
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL Compression is not supported on zero mask for prefix with 0.), (Recommended Action: Change related mask to be 255.255.255.255 for prefix with 0 or just any.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-MAIN_VSUPR_ALERT
### Response:
(Severity: 4), (Category: DRIVER), (Description: Voltage supervisor on LC card reports alerts. No handling is required from the software side, except logging this message.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VI_REPL-7-EVENT
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: An unhandled error occured while waiting for an event.), (Recommended Action: The process will restart and attempt to recover from this problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp discovery transport-address' command in IOS XR?
### Response:
The 'mpls ldp discovery transport-address' command is used to specify the transport address to be used for LDP discovery messages. By default, LDP uses the router ID as the transport address. This command allows you to use a different address, such as a loopback interface address, which provides greater flexibility and stability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-5-AUX
### Response:
(Severity: 5), (Category: OS), (Description: The AUX login to a virtual service may allow the user access to system functions that may not have been tested or may interact with the system in unintended ways. Use with caution.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-3-IMDR_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Plim datapath fpga driver imdr errors. Typically these errors indicate failure in system services during the imdr procedure.), (Recommended Action: Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-CONN_INIT
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to connect to the respective component.When this issue happens, it will trigger an automatic restart of pifibm_server_lc.), (Recommended Action: Check the status of the respective component because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-WRITE_MAC_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Display dst mac address. %x- MAC address value.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPP_PKT_F3_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 3 single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISM_PD_LIB_RELOAD_DATA
### Response:
(Severity: 6), (Category: INSTALL), (Description: This message is seen during ISSU/iMDR if service processor on the linecard reloads and the corresponding CPU on the linecards must be reloaded as well.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-MGD_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: PTP encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PTP MA process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option explicit name feature?
### Response:
The MPLS TE path-option explicit name feature allows an MPLS TE tunnel to use a named explicit path configured separately from the tunnel. A named explicit path is a reusable path definition that can be applied to multiple tunnels. It provides a way to define explicit paths independently of tunnel configurations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-3-TRACE_INIT
### Response:
(Severity: 3), (Category: MGMT), (Description: This comes when trace infra initialization fails due to some infra issue, the program will re-strat to connect the same), (Recommended Action: The program restarts once it fails to connect to event manager infra, would be fine once that infra is up)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_4_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_HARD_RESET_START
### Response:
(Severity: 5), (Category: PLATFORM), (Description: An ASIC error has occured and need to hard reset, this marks the beginning of it.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-FINDDATA
### Response:
(Severity: 7), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-7-CONFIG_WRITE
### Response:
(Severity: 7), (Category: OS), (Description: A MB command is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-3-TCAM_MGR_QOSID_ALLOC_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Request to TCAM Manager for allocating a QOS Policy ID for a policy attached to an interface failed. The most likely cause of this error is not enough ACL IDs remaining in TCAM manager. QOS policy on this interface will not take effect since TCAM entries are not programmed.), (Recommended Action: The QoS policy on this interface must be removed to free up other allocated hardware resources. QOS IDs may become available if policies are removed from other interfaces. In global configuration mode go to interface and 'no service-policy input | output <policy-name>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-2-TX_CH_FAULT
### Response:
(Severity: 2), (Category: FABRIC), (Description: The Tx POD detects a fault on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption in the downstream.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUB_UTIL-5-SESSION_THROTTLE
### Response:
(Severity: 5), (Category: SUBSCRIBER), (Description: Subcriber Session Flow control is enabled or disabled. Because Subcriber Infrastructure become is ready or not ready. i.e, system recovered from or reached to critical state or BNG infra strucute process is restarted, hence new subscriber sessions creation is enabled or disabled.), (Recommended Action: Check system heap/shmwin status along with state of subscriber infrastructure processes. If this message is seen due to a BNG infrastructure related process then the issue will be resolved automatically after the restarted process is completed its initialization. Else please collect the following logs when this ios message is seen. 'show subscriber infra readiness trace process <process name>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-SYSDB_BIND
### Response:
(Severity: 3), (Category: OS), (Description: Unable to bind to sysdb.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_ISSU_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while ISSU registration. The error condition can occur while: (1) register ISSU notification event (2) trying to retrieve ISSU state), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-4-MAX_PACKET_SIZE_RANGE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The maximum packet size requested on an interface is outside its operational range. This may result in traffic loss on the interface.), (Recommended Action: Check the MTU configuration on the interface and its subinterfaces, it may be necessary to raise or lower any configured values to achieve MTU values within the supported range. If this does not help Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_CONNECT_FAILED
### Response:
(Severity: 5), (Category: L2), (Description: It was not possible to connect to the specific to a peer device in the specified ICCP Group. mLACP will not be running over the specified ICCP Group.), (Recommended Action: If the reason message indicates that the failure is because the application is not in the ICCP Group, ensure that mLACP is configured for the ICCP Group on a peer router. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-6-PA_UPDATE
### Response:
(Severity: 6), (Category: OS), (Description: Update from PA failed.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-VIRT_INST_STATE
### Response:
(Severity: 3), (Category: OS), (Description: The named virtual service has failed. It is no longer running either because the guest OS has failed, the guest OS has shut down the machine or the emulator has failed.), (Recommended Action: An attempt at restarting the virtual service can be made from the IOS configuration by doing a no activate/activate. For debugging collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_SYSDB_STRING_CODING
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to encode or decode a string using the SysDB encoding. Aa result IS-IS will not be able to complete the operation it was performing when it encountered the error. The message describes the string which was being encoded or decoded and this should indicate the nature of the operation which was being performed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-MAPPING_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: The RS232 DLL was unable map from a TTY ID to a UART port), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_11_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SAC0_ECTW_RDATA_TO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-BUFFER_GARBAGE
### Response:
(Severity: 7), (Category: OS), (Description: A buffer has garbage bytes at the end.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_PKT_F2_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 2 multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-GET_PROC_TIDSTATUS_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Dumper collects all the process related data by using system call devctl. If a devctl fails, then the core file will be incomplete. This will not impact the system.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-5-MULTIFLOW
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error in the flow control algorithm in EIGRP. EIGRP may recover itself temporarily by doing the necessary error handling.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_EVENT_INIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-PCIE_CORE_ERROR_OVERRUN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-3-INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An software error occurred while initializing the TCP SSO functionality. If this occurred during process startup, then the process may be restarted.), (Recommended Action: The process may attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_REDIST_INFO_CLEAR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured when trying to clear redist information for a client.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_PRESENT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp global-interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp global-interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR node protection desired feature?
### Response:
The MPLS TE FRR node protection desired feature allows link protection to be used even when node protection is configured on a tunnel. It provides a way to prefer node protection but use link protection as a fallback. The tunnel is protected if possible, but a best-effort approach is used otherwise.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of using Modular Quality of Service CLI (MQC) in Cisco IOS XR?
### Response:
MQC in Cisco IOS XR is used for creating and applying traffic policies, which include classifying, marking, and managing traffic flows to ensure bandwidth allocation and prioritization of critical services.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_CONN
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred on one of the event connections managed by CDP which CDP could not recover automatically.), (Recommended Action: Try restarting CDP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-4-CAUSE_INVALID
### Response:
(Severity: 4), (Category: INFRA), (Description: Warning message that the reboot cause is out of range), (Recommended Action: Collect show log and traceback details. The process emitting this error message may need to analyse why saving invalid cause code.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TSEC-6-DRIVER_INFO_1REG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message gave an informative message with one register value. This is not a failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-4-SPA_WARN_RX_PWR
### Response:
(Severity: 4), (Category: L2), (Description: SFP hit/recovered RX Low power warning.), (Recommended Action: No action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-4-HBLOSS_NOTIFY_HBAGENT_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The particular operation mentioned in the message has failed. As a result, when there is a flood reddrv hbloss from all nodes, a failover will not happen.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between IOS XR bootable files and PIEs?
### Response:
Bootable files (with .vm extension) are used to boot an IOS XR router from ROM Monitor (ROMMON) mode. They contain the minimal set of packages required for booting the router. In contrast, PIEs are used to add features or upgrade an already running IOS XR image. They can be added or removed without rebooting the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-CURRENT_MAXIMUM_LOW
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: New current max is lower than the current tunnel count.), (Recommended Action: Use a current maximum value which is lower than the current tunnel count.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_DIR-3-NTFN_CAPI_SERVER_INIT_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: ISSU Director encountered an error and was unable to set-up the ISSU Event Notification CAPI service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-MAC_0_TX_FIFO_OFLOW_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: MAC on NPU-0 had transmit fifo overflow on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_ST3E
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ST3. Traceable condition indicates that the synchronization message quality level is changed to or from ST3E from a lower level of synchronization. SSM-ST3E is a Generation 2 SSM and is used for Generation 1.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFD_HELPER-7-DEBUG
### Response:
(Severity: 7), (Category: MGBL), (Description: General debugging information for development and general diagnosis.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-L2TRANSPORT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-WDSYSMON_REGISTER_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_MEM_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an input memory error on link 1), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN EVPN instance?
### Response:
To configure an L2VPN EVPN instance, use the 'evpn' command within the BGP configuration mode. router bgp 65000
address-family l2vpn evpn
neighbor 10.1.1.2 activate
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-INIT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There was an error during PCIe server initialization phase. The error message has detailed information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-DEVICE_FORMAT
### Response:
(Severity: 6), (Category: INSTALL), (Description: Either due to a format directive at turboboot time, or because the indicated device is not available, insthelper will now try to (re)format the device to make it available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-PIO_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The PIO operation on PLIM ASIC failed due to a hardware or software error. %s - description of the error. %s - description of the operation. %d - PLIM ASIC instance number %d - port number. %08x_%08x - address of the operation %s - description of the error details.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CRS_PAK_BUFHDR-3-PACKET_LENGTH_EXCEED_FABRIC_LIMIT
### Response:
(Severity: 3), (Category: L2), (Description: The client is requesting to set packet length to a value that exceeds CRS fabric limit. Such a packet will be dropped. This may be caused by an internal software error or by the router's receiving of malformed packets.), (Recommended Action: If the error messages persist, please collect the required logs and report to it CISCO TAC. Also notice if the error message is transient or persistent, before you report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-3-ERR
### Response:
(Severity: 3), (Category: L2), (Description: fails to init debug event manager fails to provide its service), (Recommended Action: 'show logging' to confirm there is any error from event mgr)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-PAK_NETIO_UINT8_GET
### Response:
(Severity: 4), (Category: OS), (Description: Failed to identify version of ip packet.), (Recommended Action: This is not a critical error and it may get recovered if the netio process is restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-SYSDB_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while communicating with sysdb.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace events<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace events<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace cache<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace cache<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some of the tasks handled by Install Manager in IOS XR?
### Response:
Some of the tasks handled by Install Manager in IOS XR include: fresh installation of an IOS XR image, upgrade or downgrade of an IOS XR release, addition and activation of PIEs and SMUs, removal of inactive PIEs from boot device, and rollback of installed software to the previously active version.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-4-RECOVERY_FAILED_BATCH
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN MA failed to resynchronize its configuration with another component in the system after an earlier failure, or process restart.), (Recommended Action: After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with <CmdBold>proc restart vlan_ma location [location]<noCmdBold>. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-RECOMMENDED_PKG_OP_COUNT_EXCEEDED
### Response:
(Severity: 6), (Category: INFRA), (Description: A large number of packaging operations have taken place without an install commit operation. If this limit is exceeded, install reporting, in particular via <CmdBold>show install log<noCmdBold> and <CmdBold>show install history<noCmdBold> commands may become slow. It is recommended to complete the transaction by performing <CmdBold>install apply<noCmdBold> and then <CmdBold>install commit<noCmdBold>.), (Recommended Action: Execute the <CmdBold>install apply<noCmdBold> and then <CmdBold>install commit<noCmdBold> commands once the current packaging operation has completed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_11_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-EVENT_CONN_OPEN
### Response:
(Severity: 7), (Category: INSTALL), (Description: The library failed to open a connection for registering for install notifications.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-7-ERR_GEN
### Response:
(Severity: 7), (Category: ROUTING), (Description: MFWD-HFR library encountered error during setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_MPLS-3-ERR_INFO
### Response:
(Severity: 3), (Category: L2), (Description: Platform MPLS FIB, error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|mpls] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: OS), (Description: An internal system error occurred.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-AAA_INVALID_TASKID_SIZE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Found invalid/corrupted AAA data'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-DEVICE_EXIT_FAILED
### Response:
(Severity: 4), (Category: MEDIA), (Description: The media storage card specified failed to exit properly due to the specified reason. The returned error code is specified.), (Recommended Action: Format media device manually if device fails to come up. If it still fails, replace media device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-SEQ_STATE_POST_OP_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: Ingressq driver state machine encountered a failure in initializing the device above threshold number of times. Driver will continue to initialize the device.), (Recommended Action: No user action is required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-REGISTER_INSTMGR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to register for notification from install mgr failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8508-3-EXIT_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: The driver process will re-start and complete initialization of the switch device. However, if this message is seen for more than 5 times than please reload the card using -hw-module location <> reload and check if the message still occurs in subsequent reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_LOCALBUS_FAULT
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabric FPGA detects the specified local bus fault.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_EA-4-ERR_EVC_ERROR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: After detecting an error with the IMP connection, PPPoE EA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_SUBDB_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the SubDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SubDB server, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A failure has occured in the FPD Client, there is a corresponding error code and error string.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-0-CARD_RESET_REQ
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Platform Fault Manager Node is performing a card reset based on recovery action defined in the Application Fault Condition Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-ALARM_CLEARED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Alarm cleared received from CBC, condition has alleviated.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-XAUI_0_FRAG_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XAUI interface to NPU-0 reported fragmentation error on TX side on bridge instance - 1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-MEM_STATE_CRITICAL
### Response:
(Severity: 4), (Category: ROUTING), (Description: A critical memory state notification was received. The process has exceeded the rlimit and will attempt to increase it dynamically.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_XRV9K-3-ERR_AIB_INIT
### Response:
(Severity: 3), (Category: L2), (Description: BFD PLAT was unable to setup the cwconnection to AIB for processing adjcency changes events. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will reload the MSC.), (Recommended Action: Collect all the event logs and the output of following command executed from the CLI : 'show process bfd_agent location <loc>' 'show process block location <loc>' and 'show bfd platform trace error location <loc>' 'show tech-support routing bfd')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_0_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power greater than or equal to the high Tx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering fast reroute feature?
### Response:
The MPLS traffic engineering fast reroute (FRR) feature provides link and node protection for MPLS TE tunnels. It enables fast traffic recovery upon link or node failure using pre-signaled backup tunnels that bypass the protected resource. It is enabled on a per-tunnel basis with the tunnel mpls traffic-eng fast-reroute command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: OS), (Description: PCE Initialization failed. The message displays the failed operation and the error code. Due to this failure, the PCE server is not capable of providing path computation service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-IMP_INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is typically an internal error in the software. The software failed to initialize a connection to another process in the card where the error is seen.), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea. If the problem persists, copy the error message as it appears on the console and any noticeable side effects. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-REVERT_ECHO_SOURCE_ADDRESS_SUCCESS
### Response:
(Severity: 3), (Category: L2), (Description: Revert echo source and construct echo packet hdr for BFD session successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-DUP_REMOVE_ERR
### Response:
(Severity: 4), (Category: SERVICES), (Description: The given attachment configuration, which was previously invalid due to duplicate attachments being configured on different interfaces, is now valid as the duplicate attachment configuration has been removed, but an error has occurred reimplementing the attachment. The error string given should give more details on the error that has occurred.), (Recommended Action: For non-resource errors, removing and adding back the configuration that prompted the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-THREAD_MUTEX_LOCK
### Response:
(Severity: 7), (Category: OS), (Description: A internal mutex operation has failed. This is a bug.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_CONST_BP_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-1 is constantly backpressuring bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-6-CERT_EXPIRING
### Response:
(Severity: 6), (Category: SECURITY), (Description: Cerficate is expiring within the specified time, in a week.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_PARSE_FILE
### Response:
(Severity: 3), (Category: FABRIC), (Description: A file describing switch fabric components has errors. Some fabric components cannot be brought into service.), (Recommended Action: A failed or incomplete software upgrade could cause this error. It could also be caused by corruption of an existing definition file. Ensure that the definition file is not damaged. If the problem persists, re-install the fabric control software.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-2-CONN_ERR
### Response:
(Severity: 2), (Category: FABRIC), (Description: This is to indicate that the process has failed to connect or send message to the fabric management process to get information on Max. groups per rack.), (Recommended Action: Get the output from the following commands: 'admin sh tech fabric fast-snap')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_PM-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Manager encountered a runtime error. A text reason and an error number are supplied to describe the error. Runtime errors usually concern individual interfaces. PM continues. Applications often retry the same operation to recover.), (Recommended Action: If error persists, please collect output of 'show log location <R/S/I>', 'show controller pm trace error location <R/S/I>' 'show controller pm trace creation location <R/S/I>' and 'show controllers pm location <R/S/I>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-4-WRN
### Response:
(Severity: 4), (Category: OS), (Description: A WARNING level message was emitted by QNET.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-TRACE_BACK_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Could not figure out trace back), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCAM_MGR-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error occurred in TCAM Manager which involves exiting the process. After the TCAM Manager process restarts, the error should have been cleared.), (Recommended Action: Collect the configuration, syslog and coredump file. Attach them to the ddts. After the process restarts automatically, the error should have been cleared and no user action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-4-CLIENT_API_ABUSE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An IM client has used the IM API in an unexpected way, usually implying a bug in the client code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-REDIST_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error occurred while OSPF was setting up redistribution for the named protocol. The redistribution will not take place.), (Recommended Action: This may be due to lack of memory, or due to a RIB failure, or to an internal OSPF problem. It may help to restart the OSPF process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show running-config - show configuration failed - show configuration history last 5 - show commit changes <last 5> - show logging - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC12
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-3-FILE_OPEN_FAILED
### Response:
(Severity: 3), (Category: MEDIA), (Description: File open failed. Reboot history index got corrupted. When recovering the reboot history index, file open operation failed. Please verify the reason why it is failed.), (Recommended Action: Erase the entire reboot history information is only option. Please execute 'erase nvram-raw: loc <loc>' command to erase the reboot info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR_CLIENT-3-GEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with the server process. It may be caused due to invalid api arguments by client process or a transient condition while the server process is initializing the ASIC), (Recommended Action: This message may indicate a transient condition while the card is booting up. Please check if the error message is seen continuously even after the card has reached IOS-XR RUN state. And if so, then try to power cycle the card. If the message is seen in every power cycle after the card is in IOS XR RUN state then please contact tech-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-4-INTF_DB_INCONSISTENT
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An inconsistency has been found in the adjacency manager interface database. The adjacency manager will automatically recover from this; nevertheless it may indicate a software error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-HANDLE_PARK_MUX
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This debug message indicates the start/end of I2C bus parking. Since shelfmgr power-cycles this card immediately after this parking, this message might not show up on the RP console. But if there is any delay during msg_chan_connect or I2C bus park steps, then this message will help to findout which step caused the delay.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cpposlib-3-INIT_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: A function failed to initialize.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-CPP_PKT_DIP4_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: IBS from CPP packet SPI error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-FAILED_BOOT_DURING_INSTALL_RESET
### Response:
(Severity: 6), (Category: INSTALL), (Description: On bootup the node attempted to contact the Install Director on the dSC. The Install Director was contacted and informed the node that it could not boot because an installation was in progress. The Install Director then became unavailable. Therefore, to ensure that this node boots from an up to date Install Director it will reboot itself. This message will only be seen on an RP.), (Recommended Action: The node will reboot to obtain the correct software. If the node ends in ROMMON (as the config-register was not set to auto-boot) then it is recommended to simply set the config-register to autoboot and reset to boot the correct software. unset BOOT sync confreg 0x2 reset)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-2-FATAL
### Response:
(Severity: 2), (Category: MGBL), (Description: The TTY Server has encountered a fatal error and must restart in order to continue operation.), (Recommended Action: Check to ensure that the TTY Server has restarted. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_ATI_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-TPM_NO_SUDI
### Response:
(Severity: 3), (Category: SECURITY), (Description: TPM on this board is not programmed with SUDI. Starting software based secure storage.), (Recommended Action: This is an informational message that TPM/ACT2 on this card is not programmed with SUDI. Hence Software based Secure Storage will be activated on this card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-6-PRIO_INFO
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: 'Priority Info of event thread.' 'Handling spoof events.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_START
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An internal network processor error has occurred. A hard reset is performed to recover from the specified error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-ERR_ISSU_QUIESCE
### Response:
(Severity: 5), (Category: L2), (Description: A notification from the ISSU version 1 bundle process could not be sent to the corresponding version 2 process.), (Recommended Action: There is no action required to resolve this issue. This failure will not prevent successful completion of the ISSU operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-BACKUP_CONNECTION_UP
### Response:
(Severity: 6), (Category: HA), (Description: RMF has determined that the connection to the backup process groups location has been succesfully completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The system has run out of memory'), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) show memory summary location <Current RP Location> b) 'show process nvgen_server' and get JID of this process c) show memory heap dllname <JID of nvgen_server process> If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-3-BACKPLANE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: As shown in the message.), (Recommended Action: None. Device was power-cycled to recover from the hang. If the error occurs even after power cycle, Please collect required_info log/trace and contact Cisco technical support representative with required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_AGENT-6-FPGA_GOLDEN_IMAGE_BOOT
### Response:
(Severity: 6), (Category: DRIVER), (Description: The FPGA is booted with golden iamge on the indicated card. The output of 'show hw-module fpd' will show the affected images with BACK IMG state. This can happens when Primary image is corrupted, so it so it fallback to load the golden image set to recover from the failure.), (Recommended Action: Although the system will continue to run, the golden image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for FPGA to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OC768_FRAMER_ASIC-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in OC768 Framer ASIC driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_INVALIDATE
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods invalidate encountered FATAL ERROR.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-2-PARSE_MEMORY_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: No memory left to parse show output data), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-MAC_0_TX_FIFO_OFLOW_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: MAC on NPU-0 had transmit fifo overflow on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-4-PRBS_WARN
### Response:
(Severity: 4), (Category: L2), (Description: PRBS test running in Maintenance mode and g709 must be enable, user has been restricted for enabling the PRBS test without meeting the requirement. But after enabling the PRBS test user can change the admin-state or G709 state, this can impact the PRBS test results.), (Recommended Action: Not change the admin-state and g709 state when PRBS test is running, or first stop the PRBS test then change the admin-state or g709 state, if user don't want to run PRBS test more.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-NODE_INT_SLOW_REP_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node encountered an error due to internal software issue and is able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-BFM_REGISTER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB_MAIN-3-RESPAWN_COUNT_GET_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to attach sync event handler for process fsdb_fadb), (Recommended Action: Search the event logs for events/errors related to the failure reason. Utility to get respawn count is part of overall system. If there are failures here then other processes may also exhibit similar problems. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV4_EA-5-DEBUG
### Response:
(Severity: 5), (Category: PLATFORM), (Description: AFEA IPV4-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_UNKCMD
### Response:
(Severity: 4), (Category: SYSDB), (Description: The first token in a command string was not a recognised Sysdbcon command.), (Recommended Action: Check the list of available commands and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-CERRNO_REG
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library has failed to register SysDB's error code (cerrno) definitions.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_3_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-ERR_PROC_READY
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process was unable to signal process ready to the IOS-XR infrastructure.), (Recommended Action: Restart of EIGRP might solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-3-EVENT_MGR_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Generic failure of any event manager API.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-HW_INIT_ERR
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM process failed to spawn due to failure in the PLIM hardware initialization process. The PLIM process is the driver for all PLIM hardware devices. %s - indicates the reason for the failure.), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error might be associated with larger system issues. The error is most likely due to a hardware failure on the PLIM or MSC. Diagnostics should be executed on the PLIM and MSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-3-CONSISTENCY_CHECK_LTBL
### Response:
(Severity: 3), (Category: OS), (Description: A software bug when an internal data consistency check failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_PFILTER_EA-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: Initialization of cpp_pfilter_ea process has failed due to one of the following reasons: 1) Failed to initialize event manager. This would prevent process from receiving events. 2) Failed to register with debug. This would prevent process from logging debug messages. 3) Failed to initialize connection with pal_pfilter_ea service. 4) Failed to initialize connection with cpp_sp_svr (Feature Manager Service). 5) Failed to initialize connection with UIDB Manager Service.), (Recommended Action: System Manager process(sysmgr) will retry to start the cpp_pfilter_ea. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-3-EVM_CREATE_FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: A failure occurred attempting to create an Event Manager. The relevant process will restart and attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-RTC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Network Processor has detected an RTC error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-PROCESS_NAME_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Dumper failed to fetch process name. using pid instead. No impact.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-SYSDB_BIND_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-3-PREPARE_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Prepare phase for encryption operation failed has failed. If location all was specified for the operation, none of the cards will reload and the operation is considered a failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-MPA_INIT_VIC_START_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to initialize the MPA due to failure in starting internal software process (vic).), (Recommended Action: Pls collect the output of the CLI 'show tech-support ethernet interfaces'. Please try to recover by doing the process restart of the process that generated the error. If the issue persists, contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-EVQ_ENQUEUE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured while enqueueing the specified object on the specified queue.), (Recommended Action: This failure is most probably due to limited memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-SYSTEM_ERROR
### Response:
(Severity: 3), (Category: IP), (Description: 'There was an error during invocation of a system call'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-STATE_UPDATE_DROPPED
### Response:
(Severity: 3), (Category: L2), (Description: There were insufficient system resources to provide the CFM Protocol Manager with interface state updates. The state update notifications will not be delivered, and the interface states in Continuity Check Messages will be incorrect for the affected interfaces. Other CFM functionality is unaffected.), (Recommended Action: Wait until any situation which is putting stress on system resources is resolved, and then issue the 'process restart cfmd' command to resynchronize the Interface states within CFM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECY_DRIVER-6-KAT_PASS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-CONFIG_REMOVAL_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A loopback session or sessions could not be stopped after Ethernet Loopback configuration was removed. The configuration has been removed but loopback sessions are still running.), (Recommended Action: Session removal attempts will continue to be attempted at 5 second intervals. If these removals eventually succeed no action is required. If the removals do not succed, the user may either wait for the loopback session to expire naturally at the end of its duration or restart the edpl_ma process using the following command: - process restart edpl_ma To stop the session manually, use the following command: - ethernet loopback stop local interface <name> id <id> If the error message indicates an error relating to interface manager, check the output of 'show proc blocked' and the health of the ifmgr process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is Outbound Route Filtering (ORF) in BGP?
### Response:
ORF allows a BGP router to send its inbound prefix filters to a neighbor so that filtering can be done on the sending side. This conserves resources on the receiving router. It requires the ORF capability to be negotiated between neighbors. It is enabled with the neighbor capability orf prefix-list command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable OSPF on an interface?
### Response:
To enable OSPF on an interface and specify the area, use the 'ospf area' command in interface configuration mode. RP/0/RP0/CPU0:router(config)#router ospf 100
RP/0/RP0/CPU0:router(config-ospf)#area 0
RP/0/RP0/CPU0:router(config-ospf-ar)#interface GigabitEthernet0/0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-4-FAIL_TO_ELECT_MASTER
### Response:
(Severity: 4), (Category: FABRIC), (Description: All the asics of the LCs in the system has been tried for master election but failed. Time sync is not attained in the system), (Recommended Action: Reload the system)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the platform VPLS process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_14_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-IO_INITSYNC_SESSION_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A problem occurred in TCP init sync.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-PLATFORM_NODENAME
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to get local node name through platform library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-HIGH_VOLTAGE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP voltage greater than or equal to the high voltage warning threshold. The SFP is the pluggable optics on the line cards. The voltage threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP to use a 4-byte autonomous system number in IOS XR?
### Response:
To configure BGP with a 4-byte AS number in IOS XR, you specify the AS number in the 'asdot' notation within the BGP configuration. router bgp 1.10
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_6_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-DB_PTR_CORRUPT
### Response:
(Severity: 3), (Category: L2), (Description: An internal inconsistency was identified while performing some operation on the database. The process will attempt to recover a consistent state, and should be able to continue operating. It is possible that some parts of the dataplane may become out of sync.), (Recommended Action: If additional problems are observed then restarting the process may help to restore the system to a consistent state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XRV9K_FIB-3-DPA_DOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified error happened during handling of data processing agent going down event.), (Recommended Action: show log show process blocked location <> show process fib_mgr location <> show process dpc_rm_svr location <> show controller dpc rm trace init location <> show controller dpc rm trace error location <> show controller dpc rm trace event location <> show controller dpc rm trace internal location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FAN_RPM_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Fan Unit RPM threshold crossing (SAT_FAN_RPM_ALARM) alarm is raised when the fan RPM crosses minimum/maximum threshold.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-EVM_EVENT_BLOCK
### Response:
(Severity: 3), (Category: SNMP), (Description: SNMP receives messages from an event manager. While trying to retrieve a message, an error occured, preventing successful receipt of the message.), (Recommended Action: Check 'show context' command to see if any crash happened . If there is a crash, you may need to collect 'show process blocked' and 'run attach_process -p <pid of crashed process>' output. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_6_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ZERO_COST_LINK
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified LSP contains a link advertisement with an invalid metric of 0. Zero cost links have the potential to break the SPF algorithm and are not permitted by the IS-IS specification (ISO 10589 version 2) and so the IOS-XR router will ignore the link in any subsequent route calculations. As a result traffic which should be routed via the affected routers may be dropped or enter a routing loop.), (Recommended Action: Identify the source of the offending packet and correct it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-4-DROPPED_MSG
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: A message received from the Interface Manager on a different node has been dropped. This is due to incompatible versions of the software communicating with each other and will result in interfaces not working correctly.), (Recommended Action: Verify that all nodes are using consistent image versions. If performing an upgrade this message will stop appearing once all nodes are consistent. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-MUNMAP
### Response:
(Severity: 7), (Category: HA), (Description: When attempting to free memory that is no longer in use, the CDM library received an error from the kernel.), (Recommended Action: Collect system log information and forward to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_1_PKT_MINLEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-0-PCIE_ACCESS_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: 'Unable to access device through PCIE'), (Recommended Action: Gather the data listed in 'required_info'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-ACK_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The system has encountered an error while refreshing SFP port.), (Recommended Action: Replace with a Cisco supported SFP If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-WDSYSMON_REGISTER_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-INVALID_MSG
### Response:
(Severity: 2), (Category: ROUTING), (Description: FIB internally manages its activity using 'events'. An error occurred while processing events. The process will attempt to recovery by restarting. If the restart count is excessive then the node may reload. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_PORT_0_TX_DISABLE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: On the standby RSP, BITS outputs are disabled. This prevents the sync 0 transmitters on RSP0 and RSP1 from interfering with one another when a Y-cable is installed.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-SEARCH_CLUSTER_PARITY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-USER_AUTHEN_REJECTED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Processing of phase 1.5 (xauth) with peer failed.), (Recommended Action: 'Make sure the password delivered is indeed matching the client, otherwise contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. with the exact log message received')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DCL_LIB-4-CERR_REGISTER
### Response:
(Severity: 4), (Category: HA), (Description: Error string registration failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPB_I2C-7-BUS_HANG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An I2C bus hang has been detected. Recovery is automatically attempted. Should the recovery be successful, a BUS_UNHANG_SUCCESS message is issued; otherwise, an UNRECOVERABLE_BUS_HANG is issued.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMLOG-3-ERRCHECK
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected value was found in the error check.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-5-SECURITY_MAC_SECURE_VIOLATION_PBB
### Response:
(Severity: 5), (Category: L2), (Description: The MAC secure in the Virtual Instance Port has detected violated packet. This might be a security attack. A relearn attempt had been made on the Virtual Instance Port for a MAC address which had been already learned by another secure port. One of following action might be configured and will be taken on this Virtual Instance Port: - Restrict: drop the packet and disable the learn attempt - None: forward the packet and allow the MAC to be relearned - Shutdown: shutdown the port on which the learn attempt was made If no action has been configured, the restrict action will be taken by default and packet has been dropped.), (Recommended Action: Fix the root cause of the mac security action and use l2vpn clear command to bring back this port; (<CmdBold> clear l2vpn bridge-domain <NoCmdBold>).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Embedded Packet Capture (EPC) feature in Cisco IOS XR?
### Response:
The Embedded Packet Capture (EPC) feature allows capturing packets that are received or sent on an interface. It is useful for troubleshooting packet drops, routing issues, and application performance problems. Captured packets can be displayed on the console, stored to a file, or exported to an external packet analyzer.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-RC_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error occurred in MRIB route collapse operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_SELF_RELOAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver encountered a system error which shelf-mgr cannot reload the node. The fabric driver self-reloads instead. The card and its fabric ASICs should have been isolated from the system before the self-reload.), (Recommended Action: Check the health of the shelfmgr process on the dSC RP. If shelfmgr is healthy, and the card cannot self reload, then reload the card with the following command in admin mode: 'reload loc y/SMx/sp', where x is the SM module number that generated the error, and y is the rack that it is in. If manual reload does not work, or if the error recurs, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_MUTEX_LOCK
### Response:
(Severity: 7), (Category: OS), (Description: A internal mutex operation has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-BUS_STALL_ADDR_TRACEBACK
### Response:
(Severity: 6), (Category: FABRIC), (Description: Certain address accesses were causing bus stall interrupts on the Sapir ASIC. Such addresses are cached by the driver. Subsequently, when these addresses are accessed by the driver, this message is logged to provide a traceback information to help with debugging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_MESSAGE_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: A message related to Software Policy Manager (SPM) was received. The details of the message are indicated in the message text.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-6-GEN_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPU Control FPGA operation information.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-1-TX_ESPI4_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a OOF/DIP4/LOS/SEQ/BURST/EOP_ABORT/PKT_GAP Error.), (Recommended Action: Restart the Jacket Process. If the problem persists, reboot the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-3-SYSMGR_PROC_READY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For HFR number of platform mount retries is 50.Before performing the usb bus scan verify if sysmgr process is ready. This error message will get printed when sysmgr process ready is failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_ITERATE_NEXT
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_iterate_* failed while iterating through the chkpt list.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP_IPC-4-MEM_ALLOC
### Response:
(Severity: 4), (Category: SNMP), (Description: SNMP library failed to allocate memory for an object due to low memory conditions in the System.), (Recommended Action: Restart process snmpd check again same senario. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAPS-6-POOL_UTIL_LOW
### Response:
(Severity: 6), (Category: IP), (Description: Utilization dropped below low threshold for specified pool. It shows that the pool is not utilized well at this point of time. If the utilization is always less than low threshold, pool size can be reduced. Pool utilization can be monitored using the command 'show pool ipv4/ipv6 name <pool_name>'.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink_CLNT-3-REPLAY_REQUEST
### Response:
(Severity: 3), (Category: L2), (Description: Replay request for the current node failed because of the reason specified in the format.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-4-RECOVERY_FAILED_SINGLE
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN MA failed to resynchronize its configuration with another component in the system after an earlier failure, or process restart.), (Recommended Action: After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with <CmdBold>proc restart vlan_ma location [location]<noCmdBold>. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_TSB_LC-3-ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: ACE TSB Fatal Error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-TASKNAMES
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-GENINITFAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred at system initialization time.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-FILE_NOT_OPEN
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to open the specified file. The error is mentioned as part of the message. This could impact the show run functionality or cause the config loss at upgrade or reload. If this error has happened at the time of doing copying configuration to a file, then copy will not be successful. If this happens during internal system configuration backup then certain configuration will not be updated in the backup. This could result in the config loss at next reboot. If this happens during nvgen server process restart or during initialization after a pie/package upgrade then either command files or config order or partition files are not opened. In which case certain config lines will be missing in the show run.), (Recommended Action: proc restart nvgen_server. If situation persists the Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RANGE_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-7-BAD_NVRAM_VAR
### Response:
(Severity: 7), (Category: MEDIA), (Description: Could not allocate memory for a DRAM buffer), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-REPLY_MSG_SENDING
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred while sending a reply LWM message to a client. It can be a data or an error number reply.), (Recommended Action: Please check the operation requested and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-ETHSERVER_REGISTRATION_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Failed to register for getting messages from ethernet server, therefore exiting the process. The system will attempt automatic error recovery by restarting the mbi-hello process several times. If the error does not correct itself, this card will then be rebooted.), (Recommended Action: If the problem persists even after the card is rebooted, please collect the following information and contact your Cisco technical support representative. 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_INR_VLAN_SESS_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Inner VLAN on the given access interface has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to assign an interface to an MPLS L3VPN VRF?
### Response:
To assign an interface to an MPLS L3VPN VRF, use the 'vrf' command in interface configuration mode. interface GigabitEthernet0/0/0/0
vrf MyVRF
ipv4 address 192.168.1.1 255.255.255.0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-5-BOB_MODE_CHANGE
### Response:
(Severity: 5), (Category: L2), (Description: Bundle BoB mode global configuration was changed.), (Recommended Action: Please note that the mode change will apply to new sessions only and the existing sessions need to be deleted and re-created for the new mode to take effect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_DRV-3-ERR__MIB_SYS_OBJ
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in platform component,the reason for the error mib system object id failed for the particular chassis type.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-NMON_CFG_REMOVED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that node is out of its NMON (No MONitor) config now and would be monitored by shelfmgr. While it was in NMON config, node or its card was not being monitored or reloaded by shelmgr, so might have undergone indeterministic state.), (Recommended Action: Reload the node via: #hw-module location <> reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-MUTEX_UNLOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver has been unable to unlock access to the UART.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option lockdown feature?
### Response:
The MPLS TE path-option lockdown feature disables reoptimization of a tunnel if its current path option is configured with the lockdown option. This prevents a path option from being changed even if a better path becomes available. It provides path stability and predictability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-TARGET_CFG_DESTROY
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process failed to destroy target config buffer.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMATTR-3-SET_REPLY_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The attribute owner library has failed to reply to the client to inform it that a set or clear operation has succeeded. This could result in the client being out of sync with the owner. This may be caused by a transport drop.), (Recommended Action: If the system appears to be in a low-memory condition (check the output of 'show mem summary') then this is most likely the cause of the problem. Please try to fix the low-memory condition. This can also be caused by transport drops, e.g. as a consequence of removing a card. If neither of these cases hold, then contact technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP interface priority in Cisco IOS XR?
### Response:
To configure RSVP interface priority, use the 'rsvp interface' command followed by 'priority' in interface configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-rsvp-if)#priority 4 4
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-3-BIND_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The sysdb ysdb_bind' function returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-MAC_FLUSH_UC_ENABLE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: When MACs are being flushed from a bridge, unicasting is disabled (everything floods) for a period of time in that bridge. This message indicates a problem with re-enabling unicast in the bridge.), (Recommended Action: The user should remove and re-configure the bridge domain.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-CFG_APPLY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The ELO Daemon on the specified node was unable to enact a set of valid configuration changes. Future configuration changes may be adversely affected and the protocol is likely not to operate as intended. The problem could be caused by a system resource issue.), (Recommended Action: Attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart' command on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP_FABRIC-3-INVALID_FGID_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FGID OOR. Total number of allocated MGIDs has reached system capacity. No more MGID allocations will be allowed until some MGIDs have been freed), (Recommended Action: Reduce igmp snoop route scale)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-LSP_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: When the number of transit LSPs on the router crosses the configured yellow or red thresholds, then MPLS-TE will apply the configured actions for the particular state. This message occurs only if at least one LSP threshold is configured.), (Recommended Action: The operator should monitor the total numbers of transit LSPs and unprotected LSPs on this router and take steps to bring these numbers below the configured threshold.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMIAP-4-INVALID_NETWORK
### Response:
(Severity: 4), (Category: IP), (Description: IP address on the management interface on the active/standby RP should be in the same network as the virtual IP address.), (Recommended Action: Change the IP address on the management interface or the virtual IP address so that they are in the same network and are not the same.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARBMGR-7-UNEXPECTED
### Response:
(Severity: 7), (Category: OS), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CHKSUM_ERR_0_FIA_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checksum error - 0 from FIA on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_AUTH_FAIL_2
### Response:
(Severity: 3), (Category: IP), (Description: Authentication option is configured on the LMA for the peer MAG or the customer. The PBU is expected to contain authentication option. But it is not received in the PBU. Hence the PBU is rejected.), (Recommended Action: Configure auth-option on the MAG. Optionally remove the auth-option configuration on the LMA from the peer MAG or the customer configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_LOSS_OF_SYNC_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on NPU-0 interface on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-HW_DETECTED_ERROR_LINK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver HW error interrupt handler was invoked and found a port with valid link error registers.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-FIELD_GROUP_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DPA failed to create field-group on this NPU.), (Recommended Action: Verify your hw-module configuration. Otherwise, collect show-tech and contact cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-3-FIRMWARE_UPGRADE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: 'Error was encountered during firmware upgrade operation, the operation was aborted'), (Recommended Action: -Make sure that the FPD pie is installed. -Try reissuing the upgrade commnad. -If the upgrade still fails manually delete files in harddisk:/fpd/ if any exist, and try again. -If the upgrade still fails perform OIR operation on the module and try again when it is ready ('show platform' command in admin mode displays the power modules status). -If the upgrade still fails and it successed on other power modules on the same chassis replace the power module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-3-REG_NETWORK
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the RAW process try to register itself with the network process and net io process for datapath.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY-4-NOTIFFAIL
### Response:
(Severity: 4), (Category: OS), (Description: The filecopy process failed to send a notification to its clients about a state-transition for a copy request. Users may find the reported duration of a copy operation to be quite large as a result, depending on how long it takes for a client to poll the filecopy_process to see if a state change occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-ROOT_DEVICE_BUS_ERROR_THRESHOLD_EXCEEDED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A root device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-DELETE_CORE_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: After copying. Error is specified in message. Failed to delete core file after copy it.), (Recommended Action: Check core file, manually remove the core file to free the disk space. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-7-INFO_LOCKING_OPERATION_DISPLAY
### Response:
(Severity: 7), (Category: ROUTING), (Description: Display the operation being performed on lock, and the function the operation is taking place in. This will only be displayed in verbose locking debugging.), (Recommended Action: *DEBUG*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-DB_EX_DQUEUE
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_LCPM_SHOW-7-USAGE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Startup option supplied to SIP_LCPM_SHOW is not valid.), (Recommended Action: Please re-enter the correct option as described in the usage message Example: sh controllers sip-pm interface serial <>/<>/<>/<>/<>/<>:<> loc <>/<>/cpu0)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-ASYNC_WRITE_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Tftp client has failed in writing the packet to the Transmit queue for transmission.This could lead to failure in sending the data over the control ethernet.), (Recommended Action: If message appears only once, then no action is required. Packets will be retransmitted and system should recover automatically. If message appears continuously, then it could indicate a problem with the control-ethernet. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-MUTEX_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error has been returned by the functions used for locking/unlocking an OSPF synchronization mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_GIFT-6-DEBUG_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the GIFT component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SYSDB_NOTIFY
### Response:
(Severity: 4), (Category: OS), (Description: Error in notify handler, Dumper will be impacted.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-6-HBM_BURN_LANE_REPAIR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that permanent HBM PHY lane repair was completed successfully. Displays the count of lanes repaired successfully.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-WTX_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: WAIPC related message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-3-PROGRAMMING_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates failure in FPGA re-programming.), (Recommended Action: Please collect the 'show logging -info' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_SYSMON-5-SYSCALL
### Response:
(Severity: 5), (Category: INFRA), (Description: A system call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SL-7-INIT_LTRACE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This log indicates that Service Logger was not able to initialize tracing. As result of this error, Service Logger will not have any tracings.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_ERRORSLIST
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-ROOT_CERT_MISMATCH_DEV
### Response:
(Severity: 3), (Category: LICENSE), (Description: The Production Root Certificate is being used with Development certificates.), (Recommended Action: Please activate the Development Root Certificate from the CLI. (ie. 'test license smart dev-cert enable'))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-CPU_RGMII_RX_LINK_FAIL_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: CPU RGMII TX or PUNT RX has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE_STR_STR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-2-CHOWN_BUF_FAILED_XFER_CLIENT_TO_SVR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Failed to change buffman ownership from client to server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_EA-3-STATE_CHANGE
### Response:
(Severity: 3), (Category: SERVICES), (Description: While the VASI EA process was checking the state for the specified interface pair, an error was encountered. The interface pair in question may be left in an inconsistent state.), (Recommended Action: It may help to restart the VASI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-BLOCK_PROTECTION_DISABLED
### Response:
(Severity: 4), (Category: DRIVER), (Description: Block protection should not be configured if we are running non-secure boot image. This can happen in two scenario: - User used ccc_write_bootflash without '-d' option so after downgrade to non-seecure boot first article image, the flash was still protected. - The flash is a SPANSION part that was bad configured, so it is protected by default after every power-cycle.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-INDEX_REG_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB uses the platform specific adjacency DLL when creating adjacencies. An error occurred while trying to load the DLL, and the adjacency database will not be created. The process will attempt to recovery by restarting. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Run the following command to check for the presence of the DLL: <CmdBold>show dll location <node> | include libaib_index<NoCmdBold> If present, try to restart the AIB process using the following command: <CmdBold>process restart aib location <node><NoCmdBold> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_EA-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. The ppp_ea process should be restarted to recover using the command 'process restart ppp_ea location <R/S/I>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_SYSDB_EDM_REG
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FSDB was unable to become an external data manager (EDM) for the specified path. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-BOARD_REV_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected a board revision parity error.), (Recommended Action: Reset the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-5-OPERATION_TO_RELOAD
### Response:
(Severity: 5), (Category: INFRA), (Description: Specified install operation in the message is going to reload the rack.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_8_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-SIA_LICENSE_NOT_AUTHORIZED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The authorization code installed does not contain the requested entitlement tag The authorization code installed does not contain enough counts to satisfy the request. Software upgrades will be blocked once the SIA grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Generate a new authorization with all licenses required from the virtual account and install that on the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What operations can IOS XR processes perform on the SysDB?
### Response:
IOS XR processes can perform the following operations on SysDB\n- Retrieve config and state data\n- Create, modify, and delete config data (for config-owning processes)\n- Register for notifications when data nodes are modified\n- Validate and reject config changes (for config-owning processes)\n- Store ephemeral and persistent state data\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_EA-3-SSC_SEND_SRV
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a single message to the Service Director. The Service Director may not be up to date with the state of this services on this node, so the associated IPSec SVI interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the IPSec SVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_LCPM_SHOW-7-USAGE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Startup option supplied to VKG_LCPM_SHOW is not valid.), (Recommended Action: Please re-enter the correct option as described in the usage message 'Usage: vkg_lcpm_show [-I <intf name>] | [-N <node ID>]' the node ID should be used in decimal format. Example: sh controllers pm int Ten0/2/0/0 loc 0/2/cpu0, or run vkg_lcpm_show -I TenGigE0_2_0_0 -N 33)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_LOGGER-7-DIR_NOT_FOUND
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is an informational message to indicate that a log directory in the storage device is not found. This could be because the device was being formatted. The process will restart to recover.), (Recommended Action: Do nothing)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-NO_ACTIVE_RSP
### Response:
(Severity: 0), (Category: PLATFORM), (Description: NPU Crossbar bridge FPGA detected that there is no active RSP in the system, linecard will reset itself.), (Recommended Action: If there are no RSP present or both RSP are undergoing a reload, then this is an expected message. If RSP is boot UP and the problem persists, OIR LC, reseat the LC, check bent pins on backplane connectors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_FDB_FLUSH_WHILE_AUQ_FULL_TRIGG_WA_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process issued a FDB flush operation while the AUQ was full. When this occurs a secondary AUQ is enabled to avoid FDB flush operation failure. The attempt to enable secondary AUQ workaround is failed.), (Recommended Action: To determine why the secondary AUQ workaround failed, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does the Replicated Data Service File System (RDSFS) contribute to high availability in IOS XR?
### Response:
The Replicated Data Service File System (RDSFS) in IOS XR is used to replicate configuration files and other critical files across RPs for high availability purposes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_TE_PREFIX_DEL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The process encountered an error while deleting a prefix from TE.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSUB_MA-3-INIT_FAIL
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An error occurred during the initialization of IPSUB MA process. The process will restart which should recover the situation.), (Recommended Action: System will retry to start the process and no user intervention required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-5-PWR_SEQ_OLD_FAULT_LOG_DETECTED
### Response:
(Severity: 5), (Category: DRIVER), (Description: The fault log saved in power sequencer device from a previous fault event has been collected and raw data has been decoded and saved in the indicated file.), (Recommended Action: The saved file can be collected as part of 'show tech-support ccc' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-ERR_SFP
### Response:
(Severity: 3), (Category: L2), (Description: There is an error detected during SFP initialization. SFP is the pluggable optics on the SPA, SFP initialization may happen when linecard boots up, SFP OIR and SPA process restart. SFP error is for any possible error during the initialization. The optics will not work if SFP OIR operation failed, therefore no traffic will be affected. %s - error message indicating location and the reason of the error), (Recommended Action: - Check the SFP, make sure it is CISCO certified; - Try to do the SFP OIR for a few more times; - If the issue persists, reload the SPA with the command: hw-module subslot 0/x/x reload then test SFP OIR after SPA comes up. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-7-MAP_STAT
### Response:
(Severity: 7), (Category: IP), (Description: Initialization of stat file in telnetd session failed , It is created only for statistics purpose.), (Recommended Action: It is just a debug log to indicate mapping to stats failed. Can restart telnetd session for mapping stats.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISSU_GROUP_SEND
### Response:
(Severity: 3), (Category: INSTALL), (Description: Issu process failed while sending group message ISSU operation will continue without any error. This message send will be attempted again after some time.), (Recommended Action: ISSU manager will retry after sometime. If the issue persists even after tries, contact tac with 'show tech-support issu'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_14_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_NETIO-5-CLEAR_MAPPING_FAILED
### Response:
(Severity: 5), (Category: ROUTING), (Description: MPLS could not clear control mapping for underlying protocol.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_0_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_INFRA_MGR-3-INVALID
### Response:
(Severity: 3), (Category: SERVICES), (Description: The message indicates the message type received is not a valid one.), (Recommended Action: Please provide the following logs: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - Show logging - show services secontroller trace reverse location <ISM>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE3_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE3_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDS_LIB-7-MEMORY
### Response:
(Severity: 7), (Category: INSTALL), (Description: There is not enough memory to continue with current operations.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-TEJAS_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in Tejas initialization. This means that Tejas is currently in Factory mode and this will cause the Services PLIM driver initialization to get blocked.), (Recommended Action: Upgrade Tejas with Field FPGA image If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-COULD_NOT_REMOVE_CAPS
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon failed to clean up a caps entry in PFI for the named interface. This error is not fatal in itself, although it may prevent OAM from being re-enabled on the given interface until the problem is resolved.), (Recommended Action: Read the error message, and attempt to resolve any issue that may have caused it. Restarting the Ethernet Link OAM Daemon will then allow it to resynchronise with PFI and cleanup the dangling caps. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_MPLS-3-ERR_STR
### Response:
(Severity: 3), (Category: L2), (Description: Platform MPLS FIB, error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|mpls] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-4-BACKUP_CREATE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the NPU Driver to indicate that it failed to create/access the specific path on reload.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does priority inheritance solve the priority inversion problem with mutexes?
### Response:
Priority inversion occurs when a high priority thread is blocked waiting for a mutex held by a low priority thread. With priority inheritance, when a high priority thread blocks on a mutex, the thread holding the mutex temporarily inherits the higher priority. This allows it to complete its work and release the mutex more quickly, minimizing the delay to the high priority thread.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-NETLINK_SOCKET_ALLOC_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: libnl failed to allocate a socket structure while connecting to a new network namespace.), (Recommended Action: If the system is experiencing memory exhaustion, resolve the underlying issue then restart the process. If the problem persists, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-WDG_SEG_HUNG
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVENTORY_DB_SIZE_ZERO
### Response:
(Severity: 3), (Category: MGBL), (Description: Inventory database size is zero. Can happen only if memory is too low.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-EVENT_CONN_NOTIFY_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Whenever any event occurs, a notification will be sent to OBFL manager. OBFL manager will take action based on the notification received. Failing to attach a handler for an event connection will cause OBFL manager to be restarted.), (Recommended Action: If the issue is seen after restart then, collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIO-7-ERR_LINK_TRAINING
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The Chip-to-Chip connecting link encountered the annunciated link training error. This link connects the two adjacent ASIC and its required to be in trained state for the ASIC's to commuincate control and data reliably over this channel. In general this is a recoverable error as the ASIC driver's will re-train the link on seeing this error.), (Recommended Action: Use the following CLI to make sure the link is properly trained. - show controller <driver-name> eio links all loc <> If this problem is seen consistently, Run the field diags on the board. If it is possible to isolate the trigger point for this failure, collect all the necessary info (condition) that caused the error. Reload the MSC to avoid inconsistent behavior of the system If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP next hop tracking feature?
### Response:
BGP next hop tracking is used to speed up detection of next hop changes for routes learned via BGP. It is configured with the bgp nexthop trigger enable command. When enabled, BGP monitors the next hop of installed routes to detect changes, and can initiate route recalculation when changes occur.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-3-ERR_LOCAL_TO_STATIC
### Response:
(Severity: 3), (Category: L2), (Description: Statically configured MAC address is already used by a locally learnt host. Static configuration will take precedence. All traffic destined to MAC address will be forwarded using static MAC configuration.), (Recommended Action: Please assign different MAC address to local host or change statically configured MAC address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-NLSOCK_CREATE_FAIL
### Response:
(Severity: 4), (Category: DRIVER), (Description: CCC driver creates Socket on Black VLAN interface (3073) for communicating with remote cards in the Chassis. If the socket creation fails, then all Ethernet communication from Niantic fails and I2C path is used to reach remote cards.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV_AGENT-6-CPAK_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPAK enity is inserted into the line card inv_agent collects the port data whenever it is presented.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAN-3-OVERCURRENT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ClkCtrl detected an overcurrent condition on Fan.), (Recommended Action: No action will be needed if an overcurrent alarm is set and followed by clear alarm message. if the alarm is persistent or continuous, please contact TAC. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_XRV9K-3-ERR_ISB_INIT
### Response:
(Severity: 3), (Category: L2), (Description: bfd_agent encountered an error while initializing its interface database information. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: Collect all the event logs and the output of following command executed from the CLI : 'show process bfd_agent location <loc>' 'show bfd platform trace error location <loc>' 'show tech-support routing bfd')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-REDIST_MAX_PFX
### Response:
(Severity: 4), (Category: ROUTING), (Description: We have reached the maximum number of redistributed prefixes), (Recommended Action: Check if redistribution of large number of prefixes is desired and has not been wrongly configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the two main features used to secure the forwarding plane in Cisco IOS XR?
### Response:
The two main features used to secure the forwarding plane are: 1) Access Control Lists (ACLs) which filter traffic based on configured rules. 2) Unicast Reverse Path Forwarding (uRPF) which helps prevent IP spoofing by verifying that packets are received on the interface that the router would use to forward back to the source.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCU-3-NOT_IN_SYNC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The FPGA and the MCU failed to exchange the configuration information about the board. The user will not be able to start a console tunneling session to this node.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-2-IMA_DISK_CORRUPT_BLOCK
### Response:
(Severity: 2), (Category: MGBL), (Description: A failure occurred during Runtime integrity validation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-EEPROM_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: i2c read failure. Its not under fabric control. Please check I2C trace/logs/component.), (Recommended Action: If the issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-STALE_DWDM_CARRIER_CH
### Response:
(Severity: 6), (Category: L2), (Description: DWDM Controller Interface owner has lost contact with GMPLS Client. The controller shall continue to operate on the existing DWDM Carrier Channel, resync to happen after reconnect with GMPLS Client. This is an informational message.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-CONTEXT_REG_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace context error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace context error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-START_SYNC
### Response:
(Severity: 6), (Category: INSTALL), (Description: Status information while starting install file sync.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-ASIC_NOT_FOUND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: While booting up, CPUCTRL could not find the required ASICs. %s - detail description of which asic can not be found), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISM_PD_LIB_SPA_SHUT_ERR
### Response:
(Severity: 3), (Category: INSTALL), (Description: The shutdown operation to the indicated SPA has failed.), (Recommended Action: Collect 'show-tech spa location <spa_location>' for this problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-NEG_FREE_COUNT
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-ENS_RESYNC_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: 'L2VPN manager is unable to re-connect with peers via ENS/GSP due to ENS API failures. Will retry.'), (Recommended Action: To recover from this state, one may try 'process restart' command. For examples, - process restart gsp - process restart l2vpn_mgr OR Collect 'show tech gsp' and 'show tech l2vpn', and contact Cisco TAC support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-2-VCCLASS_LIB_INIT
### Response:
(Severity: 2), (Category: MGBL), (Description: A failure occurred during the initialization of the common VCCCLASS library. This probably indicates an underlying more severe problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-CONNECT_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_ALIGN_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_ALIGN_FAIL interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-CONNECT_IO_STATS_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The transport fails to open the ipv6-io stats shared memory), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-PROFILE_NOT_FOUND
### Response:
(Severity: 6), (Category: SECURITY), (Description: Failed to find IKEv2 profile.), (Recommended Action: Configure an IKEv2 profile with respective remote identity)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT0_INVALID_CMD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an invalid command on the HT0 HTDP interface. This means that the HT host core has received a non-posted write command. These packets are not supported and behavior is undefined after this type of packet is received.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-2-REG_ACCESS_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Register access failure on Punt Switch.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATSD-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: The infrastructure for tracing returned an error.), (Recommended Action: Some Stats tracing will not be available for this process, which will make triage of any Stats problems more difficult. There is otherwise no detrimental effect to this process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-NO_VL_ENDPOINT
### Response:
(Severity: 3), (Category: ROUTING), (Description: No IPv6 address was available to use as an endpoint for a virtual link.), (Recommended Action: Configure a loopback interface with an IPv6 address and add it to the specified area.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-7-DEV_DETAILS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Details on the device bus error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-UNSUPPORTED_RACK_NUM_FOR_CONFIG
### Response:
(Severity: 3), (Category: FABRIC), (Description: Back-to-back mode is only supported between chassis with rack nums 0 and 1), (Recommended Action: Use chassis with rack num 0 or 1)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-ERROR3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate some problem with the code. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-7-LOG_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: A debug message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTLIB-4-DBG_INIT_WARN
### Response:
(Severity: 4), (Category: SERVICES), (Description: Due to an internal error the debug event was not initialised. The debug feature will not be available for this event.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP6
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-3-DLL_CERRNO_REG_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-WARNING_SLOT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An card or slot level function has failed in Shelf Manager. The details are supplied in the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-BAD_CS_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Could not get CS revision info), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_MACSEC-6-LIC_ENFORCE_INC
### Response:
(Severity: 6), (Category: OS), (Description: The licensed feature is enabled with appropriate licenses.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq Event Manager failed to create an event block), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-POLICY_ATTR_FORMAT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Length of the tunnel encap attribute formatted during update gen is not same as length received for the same attribute. This could be due to internal error in processing the tunnel encap attribute.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. collect following output arliest convenience, in order for policy change to take effect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_SBS-3-STATS_BLOCK_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: The process is exiting due to a failure in CPP Infra Stats Block Service.), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure exmem statistics location < > * *SH_CMD show controllers pse qfp 0 infrastructure memory ppe-address location < > * *SH_CMD show controllers pse qfp 0 statistics summary location < > * *SH_CMD show controllers pse qfp 1 statistics summary location < > * *SH_CMD show controllers pse qfp infrastructure exmem statistics location < > *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-WAITPID_CP
### Response:
(Severity: 3), (Category: MGBL), (Description: waitpid for the 'cp' process failed Configuration copy thread terminated incorrectly.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_EVC_OPEN
### Response:
(Severity: 4), (Category: L2), (Description: SSRP failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-BLK_BADMAGIC
### Response:
(Severity: 7), (Category: OS), (Description: Internal debugging message. For subsequent analysis of magic number corruption, snapshot of running process core dump has been taken.), (Recommended Action: Informational only. Indicates magic number corrupted and has been recovered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_LQ_SEQ_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 0 LQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-4-CHKPT_BYKEY
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MRIB encountered error while trying to update the checkpoint database. This error may occur during - save a checkpoint record by key - delete a checkpoint record by key), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEV_EUSB0_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: USB device 0 transaction is taking excess time.), (Recommended Action: The USB device 0 requires immediate service. Please attempt to restart the hd_drv process using command: 'process restart umass-enum'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-0-CARD_RESET_ABORTED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The card reset was aborted because the user has disabled card reset to allow troubleshooting to be performed.), (Recommended Action: Manually reset the card to bring the card back to a known steady state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPLS-3-VPLS_ID_CONFLICT
### Response:
(Severity: 3), (Category: L2), (Description: 'The VPLS ID conflict happens when a configured VPLS-ID value of a ' 'bridge domain equals to default value of VPLS-ID of another bridge ' 'domain. The consequent action in case of conflict ' 'is that the bridge domain with default VPLS-ID remains in the ' 'state of 'NOT Advertised'. '), (Recommended Action: 'Use 'show l2vpn bridge-domain details' to view the states of the ' 'bridge domain with conflicting VPLS-ID and the VPLS-ID value. ' 'The conflict can be cleared by changing the VPLS-ID or VPN-ID ' 'of VFI with default VPLS-ID. ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-7-PDMA_DEBUG_INFO4
### Response:
(Severity: 7), (Category: PLATFORM), (Description: %s- Function name. %d- Line number. %s- Conversion message. %x- REturn value.), (Recommended Action: debug info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-POWER_REQ_NOT_DEFINED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The card type read from the CAN Bus is not recognized to be valid. The shelfmgr will not bootup this card. The 'show platform' CLI will not show a card for this slot.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-INVALID_TYPE_CONVERSION
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: IM converted a type of size_t into either a uint32_t and uint16_t, when it expected the value in the size_t variable to be small enough to fit into the new variable type. However, the conversion caused the value to change, indicating that some data was lost. This is likely to leave the system in an inconsistent state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-4-HW_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: Plim datapath fpga errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and may trigger packet loss. These errors seen during LC boot up or SPA OIR are harmless.), (Recommended Action: Check if spa is seating properly Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-POP
### Response:
(Severity: 3), (Category: HA), (Description: An unmatched stack pop operation was detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-CLKCTRL_DACK_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver detected an data ack error from Timing and CPI controller FPGA), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_MBE_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA00 channel FIFO multi-bit error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-4-MPA_SHUTDOWN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Shutdown command received for MPA), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TSEC-6-OPERATION_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message gave an informative message. This is not a failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different OSPF network types and how do they differ?
### Response:
The OSPF network types are\n- Broadcast (default for Ethernet, elects DR/BDR)\n- Point-to-point (default for HDLC, PPP, POS, no DR/BDR)\n- Non-broadcast (NBMA) (default for Frame Relay, ATM, elects DR/BDR, requires neighbor statements)\n- Point-to-multipoint (treats NBMA as collection of P2P links)\n- Point-to-multipoint non-broadcast (P2MP but neighbors must be configured)\n- Loopback (represents a loopback interface, no hellos sent)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-GROUP_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: Unable to create PLACEMENT_GSP_GROUP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-0-SVC_EMERG
### Response:
(Severity: 0), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-6-ERR_STR_RETURN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An error occurred in stats infra component. The error string and return value gives the reason for the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-GET_MEM_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in memory allocation.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_CPM-4-AUTHENTICATION_FAILURE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The information provided by the satellite could not be authenticated correctly. Examine the error message for the specific error.), (Recommended Action: Verify that the correct satellite is connected and that there are no blocked processes or packet drops.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESDMA-6-ESD_CONN_FOUND
### Response:
(Severity: 6), (Category: INFRA), (Description: ESD on the given location is up or started. Hence connection between ESD and ESDMA has been found.), (Recommended Action: Check on the esd process in the given location)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-NODEID_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: An error happened for a nodeid operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_4_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-PAYG_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The port is enabled without the necessary PAYG license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_MGR-3-GET_EID_INV_XML_OPEN_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: OBFL failed to open xml file associated with location. A combination of board's HW Types, HW Version, PID etc., may be bad.), (Recommended Action: Check inventory traces if the inserted slot is updated correctly. Check if CCC shows fake card info due to idprom related read failures.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-INIT_PRINT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Debug message), (Recommended Action: Debug message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_THRESHOLD_BREACHED
### Response:
(Severity: 6), (Category: L2), (Description: A threshold has been breached in the hardware. This is an indication of a deteriorating link.), (Recommended Action: No specific IOS-XR action needs to be performed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QUEUE-7-QCOUNT
### Response:
(Severity: 7), (Category: OS), (Description: An internal software error occurred.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-3-STATS_ALLOC_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The OFA failed to allocate statistics entry for the feature. Number of feature entries requiring statistics entries has exceeded statistics entries reserved for that feature on this line card. As a result, accouting for the failed feature entries is not available. There is no impact on ability to apply the feature in hardware.), (Recommended Action: If per feature accouting is needed, reduce the feature configuration on this line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-3-INIT_SVR_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: Media server is unable to initialize itself. Media server will exit and retry.), (Recommended Action: Collect system log information. Contact TAC for support if the condition is unrecoverable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_MBIST_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates possible fault with the NP HBM memory. Displays the global error associated with the MBIST operation.), (Recommended Action: The line card needs to be returned for repair.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-DIAGNOSTIC_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: An Error message for the diagnostic.), (Recommended Action: Take a copy of ctrace buffer : Error, info and debug message of the process and node-id mentioned in the error message using 'show diagnostic <process> trace <xx_error/info/debug> location <node-id>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWTECH-7-DEBUG
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-CHKPT_SAVE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The Ethernet Link OAM Daemon failed to save the checkpoint entry for the given interface. Although this error is not immediately fatal, information will be lost if the process restarts before successfully saving its checkpoint data.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_lite-3-ERR_SHMEM_TRNC_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to truncate the shared memory file fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_P2MP_SRVR-2-RECV_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Some or all the cores didn't respond for a configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-MAC_0_TX_FIFO_OFLOW_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: MAC on NPU-0 had transmit fifo overflow on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-SYSDB_REG_NOTIFY_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Registration fail for sysdb notification. OBFL will fail to function as OBFL need to get notifications for every config change.), (Recommended Action: Please restart the process manually. If the issue is seen after restart then, collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-6-NEW_NEIGHBOR
### Response:
(Severity: 6), (Category: L2), (Description: A new entry has been added to the CDP neighbors table. Notification of new CDP neighbors requested through 'cdp log adjacency changes'.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-2-LSP_MTU_LOW_ERR
### Response:
(Severity: 2), (Category: ROUTING), (Description: The LSP MTU is so low that the LSP overhead can not fit in the LSP. As a result no data can be advertised in LSPs. Please increase the LSM MTU size.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_GET_NODE_TABLE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not create a required new node table, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-REDIST_MAX_PFX
### Response:
(Severity: 4), (Category: ROUTING), (Description: We have reached the maximum number of redistributed prefixes), (Recommended Action: Check if redistribution of large number of prefixes is desired and has not been wrongly configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-4-DISPLAYING_DEFAULT_HOSTNAME
### Response:
(Severity: 4), (Category: MGBL), (Description: Unable to bind to sysdb to get hostname hence displaying default hostname.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC9
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-6-DEVICE_ACTIVATED
### Response:
(Severity: 6), (Category: OS), (Description: The device on the node is activated for onboard logging.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-DUP_KEY
### Response:
(Severity: 7), (Category: HA), (Description: A client of the CDM library attempted to create an object with a key that was already in use.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-MGR_SHUTDOWN
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: When 'vpdn' configuration is removed, the VPDN Manager (vpdn_mgr) process will shutdown and exit. Something has failed in this proceedure and may prevent VPDN from functioning later or releasing resources.), (Recommended Action: Allow VPDN Manager to exit and validate with 'show proc vpdn_mgr'. If it does not exit use 'proc restart vpdn_mgr' to recover. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SERVICE_EA-3-ERR_PRM_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected from prm operation), (Recommended Action: When this issue happens, this could result in inconsistent hardware state If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-CAPABILITY_PARSE_FAILURE
### Response:
(Severity: 4), (Category: MGBL), (Description: A failure was encountered while trying to read in capability data used to create the capability database for the Central Config Validator (CCV). CCV will still attempt to validate configuration, however it may be using incorrect values in situations where the configuration depends on the capabilities of the platform.), (Recommended Action: The cause of the capability data parsing failure should be investigated, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-2-ASIC_ERROR_CIH_INIT_THRESHOLD_CARD_SHUTDOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Uncorrectable asic errors occured on card), (Recommended Action: ASIC errors that are uncorrectable have occured and exceed the threshold. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_9_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-4-BAD_NVRAM_MAP
### Response:
(Severity: 4), (Category: MEDIA), (Description: Mapping of Nvram Failed), (Recommended Action: 'Check for 2MB size NVRAM')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-USING_OLD_RTRID
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPF failed while attempting to allocate a router ID from the IP address of one of its interfaces due to an unexpected internal problem.), (Recommended Action: Use \'clear ip ospf process\' to force another attempt to find a valid router ID. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-LOST_EVENT
### Response:
(Severity: 4), (Category: SECURITY), (Description: The process failed to receive an event from the Operating System. As a result, some aspects of the process may fail to function correctly.), (Recommended Action: If erroneous behaviour is seen, restart the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_1_RX_FRAME_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-1 received an errored frame interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-INSTALL_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: ISO image installation running on the indicated card is reporting a warning condition. This condition does not stop the installation operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_create failed while creating an object in a chkpt table.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-BACKUP_CONNECTION_DOWN
### Response:
(Severity: 6), (Category: HA), (Description: RMF has determined that the connection to the backup process groups location has gone down.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-APPLY
### Response:
(Severity: 7), (Category: SYSDB), (Description: An apply function failed while a verifier was scanning SysDB (e.g. after restarting), so the operational state of the system may be inconsistent with the running configuration.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_FIA__EVT_MGR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fia event manager initialization failed), (Recommended Action: Restart the process using the CLI in exec mode - process restart fiarsp If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-3-UNCORR_FSB_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An uncorrectable error has occurred on the FSB (Front Side Bus) of the Linecard's CPU complex. The message will display the name and description of the error along with the error log. If the log indicates 'no log', that means the error is a subsequent error. 'Detected MCERR#' and 'B-INIT' errors do not have a log as well. The linecard will reload after a certain threshold of number of occurances have been reached.), (Recommended Action: Contact support with the required information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FDI-3-ERR_SEND_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: An unexpected error occurred while sending an message. Process will restart to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-4-UNEXPECTED_AAA_RESPONSE
### Response:
(Severity: 4), (Category: L2), (Description: AAA has sent a response which is unexpected or malformed in the way explained in the message. The error may cause the interface to be left in what should be a transient state permanently.), (Recommended Action: Check the output of 'show ppp interface' for the interface with the problem. If the interface has been left permanently in an unauthenticated state, then it can be manually cleared using the 'clear subscriber' command. Note that if the interface has come up successfully then the unexpected AAA response will probably not have caused problems.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-WRONG_PLATFORM
### Response:
(Severity: 3), (Category: DRIVER), (Description: The image loaded on the hardware is not correct, verify the hardware platform and image name.), (Recommended Action: Check for the right image to be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_ARL_LIB-3-LOCK_NOT_RECOVERABLE
### Response:
(Severity: 3), (Category: L2), (Description: Failed to make the mutex in consistent state results in not recoverable state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-3-SYSDB_REG
### Response:
(Severity: 3), (Category: L2), (Description: Connection Traffic Table manager registration with SYSDB verification errored somehow, the argument will show the reason of the error.), (Recommended Action: This is a corner case and should not occur multiple times. Collect required info if it persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_TS_CORE_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-1 timestamp core error on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLU-4-TBM_INCONS_CORRECTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Errors occured in the HW TBM tables have been auto corrected. No action needs to be taken. This is informational message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL0_LO_EOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL0_LO_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-MIB_CACHE_TIMER_MODIFY
### Response:
(Severity: 4), (Category: ROUTING), (Description: The cache-timer for a MPLS-TE MIB has been changed to below the \ default value or disabled entirely. This will result in SNMP directly \ retrieving data from MPLS-TE more frequently; if frequent MIB queries \ are made this may place significant load on the system and result in \ degraded performance.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-4-HARDWARE_READ_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Detected hardware error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message in PLATFORM FIB HAL indicate that some kind of system DB registration failed or HAL engine object initialisation failure), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show logging, show version, show platform, show install active, show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIAD-3-CARDMGR_START_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCMCIAD ws trying to start cardmgr process but failed with specified reason), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture console log and dump the process core of pcmciad)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALTUPLEPATH
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The path of the tuple is invalid'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-PSS_SNAPSHOT_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Persistent Storage Service snapshot error.), (Recommended Action: Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-3-ERR_IM
### Response:
(Severity: 3), (Category: IP), (Description: HSRP has failed to retrieve required information about the interface from the Interface Manager.), (Recommended Action: Check to see if there are any other errors on the system which may indicate a general service-related problem and restart those services. If the problem is isolated then restart HSRP. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-6-SESSION_STOPPED
### Response:
(Severity: 6), (Category: L2), (Description: A best-effort attempt to stop a session has been made. If an error occurred in cleaning up the session on a particular LC the SESSION_NOT_STOPPED message will be generated on that LC.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-EVENT_INIT_EVENT
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_init_event() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-IPARM_RELATED_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A problem occurred when a call to one of the IPARM APIs was made.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace interface activities<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace interface activities<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-3-MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The policy_repository process failed allocated memory for the operation specified.), (Recommended Action: The policy_repository process may function properly in the future but the operations associated with this configuration are likely in an inconsistent state. Restarting the policy_repository may correct the situation if the memory is being consumed by this process; otherwise restarting the procees that is consuming the memory may be advisable. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_MEM_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-PKT_LEN_MAX
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The range of supported packet-length values is limited and must be less than or equal to the specified maximum value.), (Recommended Action: Modify the packet-length values to not exceed the specified max value and re-apply the ACL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-VERIFYD_EXIT
### Response:
(Severity: 3), (Category: MGBL), (Description: tty_verifyd exit with failure. TTY related configuration might have not applied.), (Recommended Action: Please check the configuration and reapply if required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_MBE_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA01 channel FIFO multi-bit error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-WARNING
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv4 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace [common|ipv4] all loc <slot number>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-INVMGR_HDL_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to create inventory manager handle.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-IP_POOL_FREE_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: An error occurred while attempting to free an IP address back to the local pool), (Recommended Action: 'It may be possible to rectify the problem by restarting ip_ap process.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICEMGR-3-PCI_ERROR
### Response:
(Severity: 3), (Category: LIBRARY), (Description: NPU asic pci error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-PLIM_SERVICES_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in initialization of PLIM Services driver. If this occurred during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: Restart the plim_services process (process restart plim_services location <>) If the issue persists, do a cold reboot Services PLIM MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_IDB_INIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Cannot create initialize IDB list), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_SNOOP-7-INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the IGMP Snooping module in the platform L2FIB SNOOP component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_1_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the is-type command in IS-IS?
### Response:
The is-type command is used to configure the IS-IS router type. The options are level-1 (L1), level-2-only (L2), and level-1-2 (L1/L2). An L1 router has neighbors only in the same area. An L2 router has neighbors only in the backbone. An L1/L2 router has neighbors in the same area and in the backbone and can route traffic between the two levels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-UNEXP_EVENT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The system has received an MDR event that is not supported.), (Recommended Action: File a defect report.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-REPO_METADATA_GENERATION_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Automatic generation of repository metadata failed. This may indicate that there is a problem with the packages in the given directory, or that createrepo_c encountered an error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMN_DSTRIB_GSP_FBRC-3-ERR_DEBUG_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Debug initialization failure for GSP fabric.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-1-ERR_HW_THRESHOLD_RELOAD_NODE
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error is detected on the PLIM, and the error threshold has been crossed. Software will take action as described in the error message to try to contain or recover from the error. The hardware error and the software recovery action will cause linecard reload. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Threshold of %s - the defined threshold for this error. Software action: %s - the action that software will take to try to contain or recover from the error.), (Recommended Action: If the message recurs, diagnostics should be executed on the PLIM and MSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_DETAILS
### Response:
(Severity: 3), (Category: SECURITY), (Description: Client address, error, error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-1-PWR_DRIVER_NOT_READY
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The power module drivers have not reported any available power supply budget for the chassis. Since the power budget of the system is unknown the shelfmgr is unable to bootup line cards.), (Recommended Action: 1. Please reload the router to see if the power module drivers will report available budget and hence the line cards can be booted up by shelfmgr: <CmdBold>admin reload location all<NoCmdBold> 2. If the error persists, please reseat the power modules for this chassis and verify their insertion via the following CLI command: <CmdBold>admin show environment power<NoCmdBold> 3. If the error still persists, please collect the following and contact your Cisco technical support team: <CmdBold>admin show platform<NoCmdBold> <CmdBold>show logging local location <active RSP location><NoCmdBold> <CmdBold>show tech-support shelfmgr<NoCmdBold> <CmdBold>show version<NoCmdBold> <CmdBold>show controllers power-monitor trace<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-3-SET_BOOTORDER_PXE
### Response:
(Severity: 3), (Category: INFRA), (Description: SCTRL NCS5K Error in Setting BootOrder for PXE, for exact info view the '%s' msg displayed.), (Recommended Action: Check Connectivity to PXE server . In case of repeated failure contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-CHKPT_TBL_RESET
### Response:
(Severity: 7), (Category: SERVICES), (Description: Failed to reset a record in the given checkpointing table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-RED_STATE_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered during redundancy state transistion.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-PROC_OPEN_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Could not open the process file system), (Recommended Action: Collect the following data and raise DDTS. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: The code has performed an action which should not be possible.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-SATELLITE_LMEP_CREATE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The local MEP for a Satellite Fabric Link could not be created. This means CFM will not run over the Satellite Fabric Link, and so will be unable to detect Satellite Fabric Link failures.), (Recommended Action: The creation of the local MEP can be retried by unconfiguring CFM on the Satellite Fabric Link and reconfiguring again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OLM-7-ROUTER_ID_ZERO
### Response:
(Severity: 7), (Category: ROUTING), (Description: All existing OUNI connection will NOT come up until a Global or OUNI router ID value will be specified using CLI.), (Recommended Action: Please specify a global router ID. If this is not desired, please specify a node-id for optical UNI using: (config#) optical-uni node-id <ip_address | Interface> CLI. Make sure that this value matches the router ID used by MPLS Traffic Engineering application. If optical UNI connections do not come up even after entering the router IDs change, please make sure that MPLS TE application is using the same router ID as specified in the global router ID. Please refer to the QFT3 Caveat list for optical UNI router ID selection.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-SYSERR
### Response:
(Severity: 7), (Category: HA), (Description: This message signals an unrecoverable condition reported from the underlying system services. The severity of such errors cannot be determined locally by Checkpointing, so it treats them all such conditions as non-fatal, transient errors. The chkpt user must abort its immediate operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-4-PLATFORM_INFO_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: Failed to fetch Header base address & Window size information from shmwin window file, due to one of the following reasons: 1. Invalid arguments passed to the function 2. Error occured while opening/accessing the file 3. Required information not available in the file), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-TFTP_DEBUG_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Failed to initialize debugging services for CE-TFTP server. The system will continue to funtion as this is not a system impacting issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_PLL
### Response:
(Severity: 3), (Category: FABRIC), (Description: While initializing the transmit slices of the FIA, the driver failed to lock the PLL. This is caused due to a clock synchronization problem between the MSC and the fabric board. This would result in loss of connectivity and bandwidth to affected fabric board.), (Recommended Action: Collect the required information indicated below. Also, run the field diags and the health check. If the health check or diags fail, then initiate the RMA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-4-CHKPT_DEL_TABLE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MRIB encountered error while deleting a checkpointed table. This can lead to system memory leak.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_OPTICS_BAY_SUPPORTED_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An supported error was detected during optics initialization. This error is reported when the optics type can not be determined or it is not supported on the platform. The optics is the pluggable optics on the line cards.Optics initialization may happen when linecard boots up, optics OIR and line card process restart. The optics will not be enabled if an optics supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the optics with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-7-NULL_PTR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-CARD_MODULE_FROM_NODEID_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Parser relies on invmger API to get card number and module number. But the API had failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_LIB_COMMS-6-INFO
### Response:
(Severity: 6), (Category: HA), (Description: Internal Information messages), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-3-MUTEX_UNLOCK
### Response:
(Severity: 3), (Category: OS), (Description: An Event Manager library function was not able to unlock mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSDB_GET_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper stored various config related data in sysdb and it failed to get sysdb item. This might impact the dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-BFD_SESSION_NOT_FOUND
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to locate a BFD session for a given adjacency. If necessary IS-IS will reconnect to the server to correct.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Optics initalisation failed during insertion handling.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_EVM_CRE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to create an Event Manager to receive events in the specified thread. This is most likely to be caused by a resource starvation problem, but may also be due to an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_AS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: This warning will show up for possible out of order system database notification.), (Recommended Action: Should not attempt to publish anything until Autonomous System number is set.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPIDB-2-INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the lc idb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an access list?
### Response:
To configure an access list in Cisco IOS XR, use the 'ipv4 access-list' command in global configuration mode. RP/0/RP0/CPU0:router(config)#ipv4 access-list ACL1
RP/0/RP0/CPU0:router(config-acl)#permit tcp any any eq 80
RP/0/RP0/CPU0:router(config-acl)#exit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A critical error occurred in jacket driver which involves exiting the process. The jacket driver will restart and unless the same error occurs on the next attempt the driver will function normally. If the error is persistent, it indicates the system error or HW error which needs further investigation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can BGP routes be filtered on IOS-XR?
### Response:
BGP routes can be filtered on IOS-XR by applying RPL policies using the route-policy command in the neighbor address family configuration. Policies can match on various attributes using defined sets and apply actions to filter or modify path attributes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-THREAD_CREATE_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver was unable to create a thread for the interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-EOBC_CHIP_DOWN_RECOVERY_FAILED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Hooper shows the register reading 0xffffffff. Recovery action fails to recover the chip), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-EXTCOMM
### Response:
(Severity: 3), (Category: ROUTING), (Description: The import table list associated with an extended community set could not be created. This can occur if there is insufficient memory to allocate the import table list, or the number of importing tables exceeds the hard coded limit on the number of tables that a route may be imported into.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_0_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH_UPGRADE-7-NULL_PTR
### Response:
(Severity: 7), (Category: INSTALL), (Description: Unexpected parameter value passed to function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_RID_SES_THRESHOLD_EXCEED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Remote ID has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to reload the router in Cisco IOS XR?
### Response:
To reload the router, which restarts the IOS XR operating system, use the 'reload' command in EXEC or administration EXEC mode. RP/0/RSP0/CPU0:router#reload
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-PFM_IF_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PFM module issue. Message string details the exact issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh processes vic location <> - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_CORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE correctable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-FILE_OPEN_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured while opeining a file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALLOCATOR-7-SIZE_MISMATCH
### Response:
(Severity: 7), (Category: OS), (Description: The block size in the memory passed into the allocator module does not match that passed in by the caller on initialisation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_ALARM-3-NEGATIVE_GLOBAL_MAC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A system wide internal MAC counter is corrupted due to software error. The problem can cause data plane learn more MAC addresses than global MAC limit. When this happens, EVPN control plane may lose some MAC routes.), (Recommended Action: If the HW MAC table is not close to full, no action is needed. If the HW MAC table size is at or over the system MAC limit, there are two options for recovery: 1) Line card reload. 2) l2fib_mgr process crash on the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_MAC_IWF_SESS_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option dynamic feature?
### Response:
The MPLS TE path-option dynamic feature allows MPLS TE tunnels to be routed dynamically by the MPLS TE software, using a path calculation algorithm that considers the tunnel's constraints and attributes. Dynamic path-options do not require an explicit path to be configured. They provide flexibility in path selection.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOS_PORTQ
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_CNTRL_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while registering client information to FGID aggregator.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-4-FABRIC_UNSUPPORTED_FABRIC_MODE_BOARD_TYPE
### Response:
(Severity: 4), (Category: FABRIC), (Description: Unsupported board in slot for the fabric mode configured.), (Recommended Action: Check running configuration if five fabric mode is configured In this mode, it is expected certain LC board types such as LC36 will not be supported this. Remove this board or remove the configuration if it is desired to bring up this board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-DEFAULT_PATH_TMP
### Response:
(Severity: 6), (Category: OS), (Description: Notify that the default path has been set to /tmp/dumper), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-USER_INPUT_TIMED_OUT
### Response:
(Severity: 6), (Category: INFRA), (Description: The user was asked for some input on the CLI. However, no response was given within the required time period, and the so the operation was cancelled.), (Recommended Action: Re-run the operation, and answer any queries on the CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TXLIB-3-INV_PEER
### Response:
(Severity: 3), (Category: ROUTING), (Description: Received Socket accept request from Unexpected Address or Port Number. Connection will be rejected.), (Recommended Action: Configure the correct address and port number for the peer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_BAD_TRANSID
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you upgrade from one major IOS XR release to another using the 'mini' PIE?
### Response:
To upgrade from one major IOS XR release to another using the 'mini' PIE\n1. Copy the new 'mini' PIE and any required optional PIEs to the router's disk\n2. Use the `install add` command to unpack the 'mini' PIE and optional PIEs\n3. Use the `install activate` command to activate the new software\n4. Commit the new software set using `install commit`\n5. Reload the router for the new version to take effect\n\nNote: All installed optional PIEs must match the version of the new 'mini' PIE.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSC-7-ERR_DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric statistics client library encountered debug facility initialization failure. When this error happens, the library will not able to enable debug.), (Recommended Action: Restart Fabric statistics client manually if the error is persistent.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-RECV_LACP_MAC_TWICE
### Response:
(Severity: 5), (Category: L2), (Description: EVPN receives the CE's System ID from LACP for use in EVPN as the PBB-BSA on two or more interfaces. It cannot be used more than once as a PBB-BSA MAC.), (Recommended Action: Configure a static Ethernet Segment on the conflicting interface, and a static backbone-source-address MAC to use.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRIVER_LITE-3-ERR_SHMEM_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Attempt to init/open the shared memory fails), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-GETLINE_DATA
### Response:
(Severity: 3), (Category: MGBL), (Description: 'lib/ui library API related to getline has failed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-MEM_CLEAR_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to clear memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIB-3-BAG
### Response:
(Severity: 3), (Category: SNMP), (Description: A problem occurred while encoding or decoding information from a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-API_FILE_OPERATION_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus API debug information indicating the file and the operation on the file that failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-CONSUMER
### Response:
(Severity: 3), (Category: MGBL), (Description: These are general ATM VCCLASS client API failures.Internal failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-POGO_TCAMS_NOT_RELEASED_FROM_RESET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: POGO tcams not out of reset), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-INVALID_BOARD_CLASS
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA driver cannot handle the detected IOFPGA board classification.), (Recommended Action: This error is seen when there is a problem in internal software coding, it should not be seen under normal operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_2_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_SERVER-3-SHMWIN_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Shared memory access operations like init,open or bind might have failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-LISP_EID_TBL
### Response:
(Severity: 3), (Category: ROUTING), (Description: This reflects a failure in the maintenance of the lisp eid table used to control lisp decapsulation in the specified VRF.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-NODE_BRINGDOWN
### Response:
(Severity: 2), (Category: L2), (Description: The NPU driver was unable to perform a critical function and must trigger a node bringdown to effect recovery.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-MISSING_CHASSIS_SERIAL
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: Chassis is either not programmed with correct serial number or could not read idprom.), (Recommended Action: execute - contact cisco support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-3-WRONG_OIR_STATE
### Response:
(Severity: 3), (Category: L2), (Description: The FPD image update operation could not be performed because the specified SPA is not in the correct state. The correct OIR state for the SPA is specified in the message text.), (Recommended Action: Do not perform the update operation while the SPA is in the middle of a reload operation or while it is being initialized. Wait until the specified SPA is in the correct OIR state and retry the operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_3_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-6-CLEAR_ALL_STATS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-PROBE_SCHEDULE_FAILURE
### Response:
(Severity: 4), (Category: INFRA), (Description: An error occurred while scheduling a probe, or scheduling a packet within a probe. This could indicate a resource issue. The impact of this error is that some results will be missing for this operation; in some cases, no further results will be collected for this operation.), (Recommended Action: No further action is needed. However, if the problem persists, it may be possible to recover by restarting the protocol process on the affected node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the instdir-cli process in IOS XR installation?
### Response:
The instdir-cli process provides the user interface for performing installation-related tasks. It allows the user to execute install commands from the CLI.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-OPEN_SYMLINKS_FILE
### Response:
(Severity: 3), (Category: OS), (Description: An expected startup configuration file for QSM could not be opened. This could be due to a problem with the installed media or file system damage. QSM will continue startup-up, but some system functionality may be impared.), (Recommended Action: Your installed file system may be corrupted. Perform a format and re-install to fix it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-TSPI_CAL_ECC_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: TxSPI Calendar ECC single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPT-3-LTRACE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace start failed in cpt engine. %x-Return value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_SE-6-GENERIC_EVENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Service Interface Server related provisioning info.), (Recommended Action: No action is required. This is informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-ISSU_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: During ISSU upgrade - some NP memory capabilities are reduced temporarily while new NP image and programming is coming online. Due to a combination of high traffic rate and customer features configured - the NPs utilization is near a high water mark. This can lead to user traffic drops during the ISSU upgrade. This can be avoided by reducing the traffic load on that NP.), (Recommended Action: Reduce traffic and start ISSU again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-3-GET_NODEID_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA driver failed to obtain either its node ID or extract rack/slot/instance information (having obtained the node ID).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-DLL_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred whilst trying to open or initialize a DLL. The process will be restarted if this error occurs during process startup.), (Recommended Action: If the process has been restarted and the problem recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_IM_BIND
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) failed in an attempt to communicate with the Interface Manager (IM) process (ifmgr). This is normally a transient problem that will correct itself. However, IM is a vital partner in much router activity, including ND and IPv6 in general, so if the condition persists, check that ifmgr is running and that it isn't being blocked by some other process. Also examine any other error messages arising alongside this one.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-6-CHKPT_SERVER_COMMAND
### Response:
(Severity: 6), (Category: OS), (Description: Status information while checkpointing the server command issued.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-3-SVC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A service API failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT-4-TEST_ABORTED
### Response:
(Severity: 4), (Category: L2), (Description: The test running on the specified interface has been aborted.), (Recommended Action: Depending on the exact reason for the abort, restarting the test may succeed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_FILEREAD
### Response:
(Severity: 5), (Category: SYSDB), (Description: An error occurred during a read operation from the instruction file.), (Recommended Action: Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-XGXS_DTE_SYNC_POST_RECOVERY_FAILED
### Response:
(Severity: 2), (Category: L2), (Description: The PLA MAC xgxs DTE layer went down due to loss of sync or lane alignment. The link could not be recovered so the port was disabled), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-UNLINK_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: unlink() system call returned an unexpected error Debug trace buffer initialization failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP bandwidth on a Cisco IOS XR interface?
### Response:
To configure RSVP bandwidth on an interface, use the 'rsvp interface' command followed by 'bandwidth' in interface configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-rsvp-if)#bandwidth 100000
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-6-FQDN_CHECK_IPADDRESS_ALLOW
### Response:
(Severity: 6), (Category: SECURITY), (Description: 'As per the Cisco's Product Security Baseline, IP address in the common name of X509 certificate should not be used, as IP addresses are considered less secure.'), (Recommended Action: 'Informational, user is enabling backward compatibility by allowing ipaddresses in the CN. Security standards recommend using FQDN. Enabling this cli reverts to old behavior of allowing ipaddr in CN. User should consider moving to FQDN.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-RPC
### Response:
(Severity: 3), (Category: ROUTING), (Description: An RPC error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is a informational message from PLIM FPGA driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-4-TCP_NAGLE
### Response:
(Severity: 4), (Category: IP), (Description: Nagle's algorithm was not disabled; there is a small chance the telnet session will appear jerky. Telnet will otherwise function normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The router can continue to be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_PAK_FSV_REGISTRATION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Internal Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-2-INFRA_FAIL
### Response:
(Severity: 2), (Category: OS), (Description: There was a ENA infra call failure resulting in a failure to provide some infrastructure service.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-DEV_QSFP_OPTICS_PORT_UNSUP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A QSFP+ Module not supported for the port error was detected during QSFP+ initialization. A QSFP+ Module not supported for the port error is reported when Optics is not supported on the port. The QSFP+ is the pluggable optics on the line cards. QSFP+ initialization may happen when linecard boots up, QSFP+ OIR and line card process restart.), (Recommended Action: Verify that the QSFP+ Module is supported for the port. Replace the QSFP+ with a working one (if any) to isolate bad optics. Check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the command 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_MCAST_GTRIE-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error while initializing Gtrie. Initialization failed and aborted), (Recommended Action: Please collect debug multicast-gtrie <> for analysis on the cause If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAL_CGM-3-INIT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The PAL ACL CGM DLL failed to initialize because of memory alloc failure. This DLL does a generalization of an Access Control List to include matching on MQC match criteria If the ccl DLL fails to initialize, the access control list cannot be programmed into the hardware.), (Recommended Action: The failure should be handled by the process that is loading the DLL. The calling process should retry the initialization.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-EBS_RGMII_FIFO_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: EBS RGMII FIFO full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-BOARD_SILAB_CLK_FAIL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a clock failure on some bus/port), (Recommended Action: RMA the LC ,if you see this error on every reload. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-NPU_HW_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: When the NPU (network processor unit) resources for the interface are in yellow or red states, then MPLS-TE will apply the configured actions for the particular state.), (Recommended Action: The operator should monitor the NPU resources and try to bring back the system to the normal resource level by reducing the number of LSPs on this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-4-ERR_SYSDB_EVENT
### Response:
(Severity: 4), (Category: SECURITY), (Description: Sysdb subsystem sent a notification after a configuration change. This notification has an configuration change type that is not known to SSH. So, the configuration notification received has not been processed and configuration change applied.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-EVM_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when creating Event Manager.), (Recommended Action: Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-0-SVC_EMERG
### Response:
(Severity: 0), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-5-LPD_RESULT_CHG
### Response:
(Severity: 5), (Category: MGBL), (Description: Result of the LSP Path Discovery has changed for the operation. In case of a failure, the value of the retcode field indicates the cause of the failure. Refer to the Textual Convention RttMplsVpnMonLpdFailureSense at the CISCO-RTTMON-MIB for possible reported causes.), (Recommended Action: When result changes to a value other than 'OK', it means that the ECMP discovery could not be completed successfully for the particular period. When paths are reported as broken or unexplorable, identify the available paths through the 'show ipsla mpls lsp-monitor lpd summary' command and use the 'traceroute mpls' tool to collect more information about the failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-RESERVE_AUTH_FAILED
### Response:
(Severity: 6), (Category: LICENSE), (Description: None.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-INVAL_REDUNDANCY_ROLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An invalid Redundancy Role was delivered to BGP. If this occured during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_GROUP_RANGE_OK
### Response:
(Severity: 4), (Category: ROUTING), (Description: This router has fallen below the maximum value for the number of group ranges allowed to be received through the given group-to-RP mapping distribution mechanism.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-TSPI_ASYNC_FIFO_L72_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: TxSPI async FIFO low 72bits data single bit ECC error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_FGID_REFRESH_RETRY
### Response:
(Severity: 3), (Category: FABRIC), (Description: An FGID entry is disabled following a parity error. Request to refresh the entry wasn't entertained. This will reload the fabric card to recover.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-3-IMDR_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Plim asic driver imdr errors. Typically these errors indicate failure in system services during the imdr procedure.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-MISSING_PLANE_CONFIG
### Response:
(Severity: 6), (Category: FABRIC), (Description: Missing admin plane configuration for this module.), (Recommended Action: Check the admin plane configuration to ensure that it corresponds with the actual physical topology of the system. If this configuration looks correct then contact support, otherwise correct the configuration and the system should recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-AMBIGUOUS_PASSWD
### Response:
(Severity: 3), (Category: SECURITY), (Description: Single digit passwords are not allowed and password should not start with numeral.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_BAD_MAGIC
### Response:
(Severity: 4), (Category: L2), (Description: An SSRP keepalive message has been received containing a magic number which is different from expected. This either indicates a problem on the peer router, or indicates that SSRP has somehow begun receiving packets from a different router altogether.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Check that the SSRP configuration for the network is correct.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_GIC_BIND
### Response:
(Severity: 4), (Category: L2), (Description: Failed to bind to the QFP Generic Interface Client), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSM-4-ANOMALY
### Response:
(Severity: 4), (Category: OS), (Description: A SW exception occurred in FSM Library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-VCPU_LIMIT
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting more VCPUs than the system has reserved for virtual services.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-1-HSSD_UNKNOWN
### Response:
(Severity: 1), (Category: PKT_INFRA), (Description: This error indicates that a code sanity check has failed. This indicates a new global HSSD area was added to Pakman without adding the appropriate endian transform code to NetIO.), (Recommended Action: NetIO will not start properly until the code is fixed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-XTC_DB_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed delete sr-policy from xtc_db.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-SPIO
### Response:
(Severity: 4), (Category: L2), (Description: PTP MA encountered an error interacting with SPIO. The error message describes what operation has failed and why it failed. The error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PTP MA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-DB_INCONSISTENT
### Response:
(Severity: 3), (Category: L2), (Description: An internal inconsistency was identified while performing some operation on the database. The process will attempt to recover a consistent state, and should be able to continue operating. It is possible that some parts of CFM may become out of sync.), (Recommended Action: If additional problems are observed then restarting the process may help to restore the system to a consistent state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-OOR_PROT_STOP_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a warning message in the DNX FIB to indicate that named resource become available and OOR protection for the resource stopped.), (Recommended Action: NONE)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_SFP1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-TLV_PARSE_LEN_INCORRECT
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'Parsed TLV message length is greater than ' 'original message length'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-BFD_DELETE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to delete one or more sessions with the BFD server. The connection to the server will be reset in an attempt to recover from the error.), (Recommended Action: This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-SD_BATCH_ERR
### Response:
(Severity: 4), (Category: SERVICES), (Description: One or more errors occurred in RSPP MA, the service diversion management agent, during the processing of a set of notifications from Service Director, containing service locations and diversion information. Diversions for service attachments may now be inconsistent on the given node. The error string will give more detail on the type of error that has occurred.), (Recommended Action: If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem. If the error string given does not indicate that this is a resource error, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-4-PCDS_ERR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error occurred inside PCDS data structure. Process continues to run but PCDS data may not be logged properly), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support control ethernet fast location <node>, dumpcore running eth_server location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support control ethernet fast location <node>, dumpcore running eth_server location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE0_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE0_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-LOCKING_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: bfm encountered an error and is not able to recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-4-UNABLE_TO_DELETE_FILE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: As part of an install operation a file could not be deleted.), (Recommended Action: Delete the file manually.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-7-MSG_CRIT_NORM
### Response:
(Severity: 7), (Category: OS), (Description: The bcdl_agent_start api was used incorrectly.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_1_PKT_MAXLEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on FIA to NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_THREAD_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to create a thread essential to its operation. This is an internal software error. It requires a restart of the isis process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_ADDRESS_FAMILY
### Response:
(Severity: 3), (Category: IP), (Description: The telnetd server was passed a bad adress family.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-REQUEST_REJECTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The requested action was not performed.), (Recommended Action: Rety later or configure the node to be out of that state before performing again the same action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_FREE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-MEPS_DELETE_CCM_GEN
### Response:
(Severity: 3), (Category: L2), (Description: The CFM MA tried to delete a number of MEPs whilst some of those MEPs were scheduled to have CCM generation enabled or disabled. The CCM generation batches have been cleared, which may cause an inconsistency between CFM's internal state and the requested configuration.), (Recommended Action: If any problems are observed, then try restarting the CFM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-FROM_MRIB_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_2_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-DIR_MODE_ERR
### Response:
(Severity: 4), (Category: MGBL), (Description: This message indicates that the directory path specified in the message has incorrect mode (ie. not a directory). As a corrective action, the software attempts to automatically remove the file. A message of 'No Error' for unlink, for example, would indicate that it has successfully removed the file.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-1-GOLDEN_UPGD
### Response:
(Severity: 1), (Category: DRIVER), (Description: card_mgr has detected on this PID the backup IOFPGA is not protected, this operation is a one time operation for this PID. During this upgrade cycle a user should strictly refrain from making any config changes or performing any operation on this card. Failure to comply with this request may cause the HW to be unusable or may result in an RMA. Please ensure the FPD upgrade is successful and then perform regular operations on this HW after a reload as stated in the upgrade complete messages.), (Recommended Action: In case the operation fails please collect logs 1. Syslogs 2. show tech card-mgr 3. show tech fpd 4. show tech obfl 5. show tech shelf-mgr 6. show tech ctrace 7. show tech fpd-serv)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_ASIC_FGID_SRAM_BIST_PASS
### Response:
(Severity: 3), (Category: FABRIC), (Description: This message is seen when the FGID SRAM BIST is completed without the necessary pass \ bits being set for the identified ASIC. Observed pass bits status and the expected \ status for the ASIC are also captured in the message. The pass status is a 3 bit status \ i.e. one per SRAM. Number of SRAMs depend on the fabric stage and the fabric board as \ specified below: \ S2 Card: 3 SRAMs i.e. SRAM A, SRAM B & SRAM C. \ S2 ASIC on S123 Cards (all LCC flavors): 1 SRAM i.e. SRAM A. \ S3 ASIC on S123 & S13 Cards (all LCC flavors): 2 SRAMs i.e. SRAM A & SRAM B. \ Pass status bit positions: \ SRAM A: bit 2 \ SRAM B: bit 1 \ SRAM C: bit 0.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-DUMPIFS_ERR
### Response:
(Severity: 3), (Category: INSTALL), (Description: The dumpifs utility reported errors while extracting IFS2 file from bootimage into shared memory), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-6-UPDOWN
### Response:
(Severity: 6), (Category: L2), (Description: Debug messages for APS.), (Recommended Action: No Action requirements.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-SITE_XTR_RLOC_INCONSISTENCY
### Response:
(Severity: 4), (Category: IP), (Description: 'While probing other xTRs in our own site we received a map ' 'reply mapping record listing a different set of locators ' 'than those we have configured in database commands.'), (Recommended Action: 'Issue the <CmdBold>show lisp {ipv4 | ipv6} database' '<noCmdBold> command on both this xTR and the other ' 'site xTR that sent us the map reply to locate the ' 'mis-configuration. Add or remove locators in the ' 'config of one or both xTRs to make them have the ' 'same list of configured locators.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_2_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 2 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ULOOP_USID_LIMIT_EXCEEDED
### Response:
(Severity: 6), (Category: ROUTING), (Description: ISIS was unable to provide microloop avoidance for a node or prefix because the platform or linecard does not support the needed number of uSIDs.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_SAAR-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: There was an error initialising the ATM SAAR component. first %s --> Describes the error second %s --> return code string), (Recommended Action: Check memory conditions on the node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-HIGH_LASER_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP laser bias greater than or equal to the high laser bias alarm threshold. The SFP is the pluggable optics on the line cards. The laser bias threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-HC_WARNING
### Response:
(Severity: 4), (Category: IP), (Description: The ipv6_ma process is blocked for more than 2 Mins on some other process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check process blockage in the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_RIB_NOTIFICATION
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS received an unexpected RIB notification pulse and will ignore it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-6-HEADLESS_CASE_DETECTED
### Response:
(Severity: 6), (Category: OS), (Description: Headless case detected recovering though PON.), (Recommended Action: none. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-3-DEBUG_SERVICES
### Response:
(Severity: 3), (Category: OS), (Description: A call to a debug services interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-DISK_FSCK_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-1-CPU_HOG_ALERT
### Response:
(Severity: 1), (Category: HA), (Description: This message is displayed after the CPU hog detector trips. It shows the percentage of CPU used by the busiest thread in the top consumer of CPU.), (Recommended Action: The command 'show watchdog trace' will display additional information about the potential CPU hog. If the hog is persistant, contact technical support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFMMIB-3-NO_STACK
### Response:
(Severity: 3), (Category: L2), (Description: In the initialization of the DOT1AG/MEF SOAM MIB DLL an error occurred while trying to set up a filtered interface table for stack entry lookups. As such, items in the Dot1agCfmStackEntryTable will not be accessible via SNMP requests.), (Recommended Action: Continue working with the DOT1AG/MEF SOAM MIB DLL without the ability to query the Dot1agCfmStackEntryTable, or restart the mibd_interface process in an attempt to clear the error. If the error message indicates an out of resource condition Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-AAA_INVALID_TASKID_SIZE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Found invalid/corrupted AAA data'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM_API_LIB-2-SERVER_DATA_QUEUE_FULL
### Response:
(Severity: 2), (Category: ROUTING), (Description: The PM server inter-process message queue is full and further messages cannot be accepted. This may impact PM functionality if the condition persists.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-LIB_INVALID_TYPE_FOR_LONGEST_MATCH_ACL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Only IP prefix-lists can be used to enable longest-match LSPs.), (Recommended Action: The system proceeds by ignoring the configuration. This will result in longest-match LSPs not being established. Unconfigure the ACL and configure an IP prefix-list instead.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-ALARM
### Response:
(Severity: 4), (Category: LICENSE), (Description: The current system opid mismatched with the restoration license opid.), (Recommended Action: Use latest license restore file.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-INSUFFICIENT_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is a thread in the context of the IOS XR microkernel?
### Response:
A thread is a unit of execution within a process. The microkernel schedules threads, not processes. A process can have multiple threads. Threads time-share the CPU and can communicate using synchronous message passing IPC. Context switching between threads is very fast.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMATTR-3-UNKNOWN_PULSE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The attribute client or owner has received a pulse which is not expected, and cannot be handled. This message has been dropped. If no other problems are seen then the error can be considered harmless.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-4-WARN_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq manager encountered an error but was able recover or continue execution. This message is just for informational.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINK-4-BERTSTATUS
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The bert status of the link), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-ROLLBACK_FAILURE_DURING_MODIFY
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-L3IF_OOR
### Response:
(Severity: 6), (Category: ROUTING), (Description: L3 EM Table OOR during l3if creation event), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-3-TIMER_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred processing one or more timer events driving the PVRST engine. The process has restarted to correct this issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTS3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-SRV6_ENABLE_DISABLE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: ISIS is unable to enable or disable SRv6 The problem may be caused by a low memory condition but is most likely to be an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_1_FIA_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error - 1 from FIA on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_MEMPOOL_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to create a memory pool. IS-IS cannot operate without this resource and will abort. The most likely cause is a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart IS-IS. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-LOCK_HELD
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BUNDLE_AGG_POLICER-6-MODE_CHANGE
### Response:
(Severity: 6), (Category: QOS), (Description: Any change in bundle aggregate policer mode requires the LC to be rebooted to or removal and re-apply of the policy to take effect.), (Recommended Action: - Reload of the card or chassis - Or remove the policy and reattach)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BGP_CONVERGE
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS is configured to set the overload bit in its LSPs upon startup and to wait for BGP to converge before resetting the overload bit, but an error has occurred whilst registering for notification of BGP convergence. As a result, the overload bit will not have been set upon startup. This may be due to a low-memory condition but may also be due to internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-PROCAGENT_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FGID driver failed procagent initialzation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-NULLREG
### Response:
(Severity: 3), (Category: MGBL), (Description: could not find registry entry.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-INTERNAL_PARAMETER
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent has passed itself an invalid parameter - this point in the code should not have been reached. The HTTP process may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-2-WARM_BOOT_UPDATE_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An internal error has occurred in prm_server process which cannot be recovered automatically.), (Recommended Action: Router reload is required to recover the process state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-3-PAKINPUT_FAILED_MATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Input packet hardware queue failed match while trying to return a group of buffman buffers to ES rx/tx mem pool This message indicates that input hardware queue failed to match assigned hardware queue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-PROTOCOL
### Response:
(Severity: 7), (Category: SYSDB), (Description: There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB MS.), (Recommended Action: Upgrade all nodes to have the same version of SysDB installed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-PORT_CONTROL_ENABLE_SUCCESS
### Response:
(Severity: 5), (Category: L2), (Description: Port Control is enabled on the interface.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-EDM_ENCODE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS failed encode a bag for EDM.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_EA-3-ADJACENCY
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error was encoutered while trying to set up adjacencny information for a InterFlex interface. The exact error is detailed in the error message. Packets will not be forwarded to the affected interface.), (Recommended Action: It may help to restart the affected InterFlex EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be addressed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-6-CE_SWITCH_LPBK_TEST_INFO
### Response:
(Severity: 6), (Category: DIAG), (Description: This is the informational message just to inform the difference of time between two consecutive threshold failures for inter or intra rack control ethernet switch loop back test. If its greater than one hour diagnostic software will not reset the node and skip the test.), (Recommended Action: Please mark a note of it and share if needed. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_CLIENT-7-API_ERROR
### Response:
(Severity: 7), (Category: HA), (Description: This provides information about non-error conditions which may even be expected under certain circumstances. Nevertheless, these are not considered 'desirable' conditions.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-4-INFO_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: SSH encountered authentication warning.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2C-3-ERR_MISCONFIG
### Response:
(Severity: 3), (Category: L2), (Description: The L2VPN Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.), (Recommended Action: The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-7-ERR_BAG_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver was unable to register Fabric driver bags. The Fabric driver and the System should continue to function as normal, with the exception that the 'show' commands for Fabric driver will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-INCONSISTENCY_ALARM
### Response:
(Severity: 3), (Category: MGBL), (Description: The configuration inconsistency alarm has been raised or cleared.), (Recommended Action: If the configuration inconsistency alarm has been raised, run 'clear configuration inconsistency' to synchronize the persistent configuration with the running configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure MAC learning for an L2VPN bridge domain?
### Response:
To configure MAC learning for an L2VPN bridge domain, use the 'mac learning' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
mac learning
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-STATS_INIT_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that stats SHIP register initialization operation has failed. Embedded string provides the information about the error and the failed SHIP register. There is no functional impact as this stats is for debugging purposes only.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-CLOSE_PROBLEM
### Response:
(Severity: 7), (Category: OS), (Description: Dumper opens various files, writes the data and closes the files. Possibly the server died. It might have unpredictable behavior of dumper.), (Recommended Action: Please collect the data and contact support. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_5
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt link failed), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_LTRACE
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the Lightweight Tracing service. The error message describes what operation has failed and why it failed. This is a fatal error and the PPP MA process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IM_STATE_REGISTER
### Response:
(Severity: 3), (Category: L2), (Description: CDP failed to register with the interface manager for state changes on this particular interface. This means CDP will be unable to track the state of the interface. CDP functionality may be impaired.), (Recommended Action: Perform 'cdp disable', 'cdp enable' on the interface to try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-INSUFF_ARG
### Response:
(Severity: 4), (Category: MGBL), (Description: Invalid Arguement. Null paramater passed as part of sysdb path. Please enter a valid sysdb path.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_EGR_Q_ERR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-LWM_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: Failed to execute some LWM library functions.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-5-ERR_ASIC_PARITY
### Response:
(Severity: 5), (Category: FABRIC), (Description: In the specified block a parity error encountered at mentioned addr offset. If the error exceeds its threshold, the driver trigger a corrective action which may include device reset or MSC reload.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-NOTIFICATION_EVENT
### Response:
(Severity: 6), (Category: L2), (Description: This informational message indicates an event which requires attention), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CHKPT_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal Checkpoint function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE2_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE2_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-LOW_TEMP_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP temperature less than or equal to the low temperature alarm threshold. The XFP is the pluggable optics on the line cards. The temperature threshold values are read from the XFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the XFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-LC_POWER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message indicates that there is a failure to power up LC card.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_PORT_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-TO_MRIB_MOFRR_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BOOTVAR-7-VAR_TOO_BIG
### Response:
(Severity: 7), (Category: INSTALL), (Description: Boot variable has exceeded the maximum size.), (Recommended Action: Reduce size of boot variable by removing unwanted inactive SMUs and packages. For e.g., remove extra boot system commands, and try again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TSEC-4-DRIVER_ERROR_BUFALIGN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A packet buffer passed to driver is not aligned to required boundary. This is not a critical failure and corrected by driver. Driver can continue function.), (Recommended Action: If happens entensively, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_EA-3-PLAT_UPD_FAILED_GL
### Response:
(Severity: 3), (Category: L2), (Description: Platform update failed for all interfaces in a batch.), (Recommended Action: restarting ipv6_ea may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-AF_LIB_FILE_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: 'File/Directory open operation failed, or the data in the file was corrupt'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-VS_NOTIF
### Response:
(Severity: 3), (Category: OS), (Description: Unknown vs notif from sysdb.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-6-TUNNEL
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: A VPDN session has been terminated due to errors encountered by the L2TP tunnel that contains the affected session), (Recommended Action: The log indicates that a session is terminated or has failed to establish due to teardown of the tunnel that contains it. Please examine the human-readable error message that appears in the log and conduct the first level of troubleshooting based on the info in the message. If the root cause is still not clear, collect the required info and forward it to customer support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNSEC-2-IKE_SESSION_DELETED
### Response:
(Severity: 2), (Category: SECURITY), (Description: Otnsec session is secured), (Recommended Action: No action required (Normal Operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ether_spa_mac_error-1-RECOVERY_FAILED
### Response:
(Severity: 1), (Category: L2), (Description: A MAC Frame Corruption occurred on the interface, concerned port is in error condition after maximum recovery retries. The concerned port has been permanently disabled. Manual intervention required to re-enable the port.), (Recommended Action: MAC Frame Corruption has occured. Try below steps: 1. Try shut/no shut of the interface. 2. Remove and re-insert the transceiver on the same port. 3. Remove and re-insert the transceiver on a different port. 4. Remove and insert the transceiver on different spa. If the issue still persists collect the output of below CLIs and contact TAC. 1. 'show inventory' 2. 'show controllers <physical-interface>' 3. 'show logging')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-NULL_EVM
### Response:
(Severity: 3), (Category: L2), (Description: Event manager not created), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-5-OPERATION_ISSU_ABORT_DONE_WITH_CLEANUP
### Response:
(Severity: 5), (Category: INSTALL), (Description: The ISSU has successfully executed its abort procedure and will now begin to restore the system to a consistent state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-IM_RELATED_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed some IM related operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace interface activities<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace interface activities<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Configuration Manager in IOS XR?
### Response:
The Configuration Manager in IOS XR is responsible for processing configuration commands entered by the user, validating the commands, and applying the configuration to the relevant processes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-CLIENT_LOCK_ISSUE
### Response:
(Severity: 3), (Category: OS), (Description: 'Failed in locking the GSP client. '), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-ENQUEUE_FAIL
### Response:
(Severity: 3), (Category: DIAG), (Description: An internal software error occurred while processing the diagnostic message alongwith the opcode to the dignostic process of the specified card or location/sub-location.), (Recommended Action: Copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-IO_PERM_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver has been unable to gain the required permissions to access the UART.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACLMIB-7-INIT_DEBUG
### Response:
(Severity: 7), (Category: ACL), (Description: The ACL MIB library initialization has failed. The ACL Statistics MIB functionality will be still be available, but some of its functionality not be completely available. You may not be able to turn on debugs, get ltrace, ship logs, or some other minor functionality.), (Recommended Action: Check the error string and try to restart the mibd_interface process with the command <CmdBold>process restart mibd_interface <NoCmdBold> If this does not correct the problem, collect the required information listed below.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-5-CHKPT
### Response:
(Severity: 5), (Category: MGBL), (Description: An error has occurred while doing a checkpointing operation. This may result in loss of old statistics data during process restart.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-GEN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in PCIE Operation), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-EVM_TM_LEAF_NEW
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to create a timer tree leaf object.When this issue happens, it will trigger an automatic restart of pifibm_server_lc process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-MOBILE_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The Sync-E is configured without the necessary mobile license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-UNEXPECTED_HB
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a HB was received from a node that was not previously detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-EXITING
### Response:
(Severity: 4), (Category: SECURITY), (Description: A failure occurred during shutdown of the specified process, and it was unable to notify the System Manager that it was about to exit. In rare cases, this could result in a failure by the System Manager to restart the process when it ought to do so.), (Recommended Action: If the process ought to be running and is not, then attempt to restart it using the 'process restart' command. If this fails, deconfigure the process and re-enter the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_0_FIADDR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from FIA DDR on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-4-DETECTION_DISABLED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Detection disabled means either UDLD gets disabled, or UDLD is running but the port gets disabled, or detects a link down or the module is reset.), (Recommended Action: Check the link on which the error happenned. Try replacing/reconnecting the GBIC/SFP/cable at either end of the link. Re-enable the port on the RP and see if the port comes up. If the problem still exists the port will be disabled again with this message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_INVALID_RA_INTERVAL_FOR_CONFIGURED_DNS_LIFETIME
### Response:
(Severity: 3), (Category: IP), (Description: This configuartion for the maximum Router Advertisement (RA) interval will make already configured RA DNS Lifetime invalid.Configuration range of RA DNS Lifetime is dependent on the maximum Router Advertisement (RA) interval. RA DNS Lifetime should be greater than maximum Router Advertisement (RA) interval and less than twice the value of maximum Router Advertisement (RA) interval.), (Recommended Action: First remove the configuration of the DNS server or DNS search list , which will become invalid due to this maximum Router Advertisement (RA) interval configuartion. second , configure this maximum Router Advertisement (RA) interval configuartion. third , configure DNS server or DNS search list , which we removed in first step.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-INSTALL_PKG_SHOW_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Install manager might have died), (Recommended Action: Verify if install manager is up and running.No action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CARD_YELLOW_OVERTEMP_CONFIG_CLEAR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Yellow threshold unconfigured. Clearing yellow alarm.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NCS4K_4H_OPW_QC2-4-UNKNOWN_LASER_STATE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Some devices (DENALI, CFP2) cannot be upgraded in field if the CFP2 laser is ON. Download of these binaries is not reliable with laser ON. Download is prevented if the laser state information is not available.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPPIF-4-WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A run time warning occurred during the pidb operation on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR manage configuration during package activation and deactivation?
### Response:
During package activation in IOS XR, any new configuration options introduced by the package become available. During package deactivation, the configuration related to the package is automatically removed to ensure consistency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-NBREXIST
### Response:
(Severity: 4), (Category: ROUTING), (Description: Neighbors had been configured earlier when the network type was nonbroadcast. The current configuration request will cause these configured neighbors to be abandoned.), (Recommended Action: Remove the configured neighbors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IDB_LIB-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error information during improper updation of variables or incorrect return state in platform FIB), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-2-PEC_FAILDONE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The inserted expansion card is in failed state due to some reason. LC Recovery required to re-enable.), (Recommended Action: An attempt to initialize PEC failed. Re-Enable/Power-on the card only if we have sufficient power. Please try to recover by reloading line card using CLI 'hw-mod loc <> reload'. If the issue persists, collect console log and the following information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces - gather)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-PHY_XAUI_THRESH
### Response:
(Severity: 2), (Category: L2), (Description: The XAUI bus between the PLA ASIC and PHY device experienced a synchronization problem resulting in a lane failure causing a link flap. Software could not recover the problem and the port has been disabled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-ADJ_WARNING
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K adjiacency module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log and following traces: show cef trace loc <slot number> show cef platform trace [common|ipv4] all loc <slot number> show adjacency hardware trace loc <slot number> show bundle trace all loc <slot number> show im trace loc <slot number> Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN_SWITCH-2-LINK_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The internal link interface for the specified port is down.), (Recommended Action: Gather the data listed in 'required_info'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_MUTEX_UNLOCK
### Response:
(Severity: 7), (Category: OS), (Description: A internal mutex operation has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_SSL-6-CERT_VERIFY_INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: SSL general info message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-STARTUP
### Response:
(Severity: 3), (Category: MGBL), (Description: Configuration Manager is displaying an error message during boot time.), (Recommended Action: Most likely the error has caused some kind of configuration loss that is not saved as failed configuration. Check running configuration and any reported failed startup configuration. Manually reapply any missing running configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-PFI_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: Unexpected updates have been received by the Ethernet Link OAM Daemon regarding interfaces on which OAM is not configured. This indicates that a resync is required between the OAM process and PFI.), (Recommended Action: Restart the Ethernet Link OAM Daemon on the affected node. This will force a resync of the state with PFI. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-EOBC_LINK_DOWN_CLEARED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link on epm switch device was down, but now cleared), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-EXTERNALERR_RC
### Response:
(Severity: 3), (Category: ROUTING), (Description: An external software error occurred. This is a non-OSPFv3 errors triggered from external DLLS, libraries, or inter-process calls.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is to print process initialisation messages.), (Recommended Action: No info needs to be collected. This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_METRO-3-QINQ_INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: L2FIB Metro L3QinQ failed to initialize correctly. Without L2FIB Metro L3QinQ init, can not configure L3QinQ vlan subinterfaces.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED_LIB-7-VECTOR_OVERFLOW
### Response:
(Severity: 7), (Category: OS), (Description: A client was unable to send a message to PlaceD due to encountering an internal error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5347_ACCESS_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5347 read/write access failure/success), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-L2FIB_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The L2FIB Infrastructure reported an error which could not be handled. The operation will not be retried - the internal state of CFM may not match the global system state.), (Recommended Action: If any problems are observed, then check the status of the l2fib and l2vpn processes for any obvious errors. If necessary, try restarting the process that encountered the error using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_DB-3-LOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: A system call for locking read-write lock failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_VRF-3-RD_PUBLISH
### Response:
(Severity: 3), (Category: ROUTING), (Description: The RD value for a VRF or set of VRFs failed to be published.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOSS_OF_LOCK_EXT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-GET_ENVPATH
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_READERINIT
### Response:
(Severity: 5), (Category: SYSDB), (Description: An error occurred while preparing to read instructions from the command line.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-6-ALARM_CHANGE
### Response:
(Severity: 6), (Category: OS), (Description: Service alarm changes. They are not necessarily critical errors but need investigation by DE), (Recommended Action: Collect system logs. Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-2-FABRIC_ASIC_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric asic is down.), (Recommended Action: Fabric asic is down. Recovery action would be taken. If the error is persistent, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FILE_OPEN_FAIL
### Response:
(Severity: 4), (Category: INSTALL), (Description: Failed to open the specified required file, so processing of the current request or operation will halt. The filesystem may be in error, or the Install infrastructure may be behaving incorrectly.), (Recommended Action: Please check the filesystem for corruption using the fsck disk check CLI and retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-5-BD_STATE_CHANGED
### Response:
(Severity: 5), (Category: L2), (Description: The state of specified BD, with the BD ID, has been changed. The possible states are: - up - down - admin down The trigger of the BD state change are: - Shut/No Shut BD from CLI - BD operational state changed), (Recommended Action: None. To suppress this IOS message, please unconfig 'l2vpn logging bridge-domain'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_RETURN_TO_POOL_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while returning FGID back to FGID pool. - invalid FGID passed - FGID lookup fails - space problem with FGID pool), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_OPTICS_BAY_PID_NOT_SUPPORTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PID not supported error was detected during optics initialization. A PID not support error is reported when either the PID can not be read or not supported on the platform. The optics is the pluggable optics on the line cards.Optics initialization may happen when linecard boots up, optics OIR and line card process restart. The optics will not be enabled if a PID not supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the optics with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-LIST_ITEM_NOT_FOUND
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-6-MPLS_LABEL_PATHS_EXCEED
### Response:
(Severity: 6), (Category: ROUTING), (Description: Controller and/or agent programmed a ELSPs with path count exceeding system limit.), (Recommended Action: Controller and/or agent must ensure that total number of paths across all ELSPs on the label does not exceed system limit. If this error is seen during a mark and sweep operation, Service-layer state may get recovered when stale objects are removed when controller and/or agent send a MPLS EOF message. Use Service-layer show commands to confirm if the total number of paths on the label exceed system limit.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_AGORA_ALM_TYPE_TWO
### Response:
(Severity: 2), (Category: PLATFORM), (Description: AGORA type two alarm.), (Recommended Action: If the problem persists, call your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REP_COM_REMOVE_NOT_TRIGGERED
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that the auto commit operation failed, hence install remove inactive all will not be triggered.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOL_MAPPERC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an IPv4 address on an interface?
### Response:
To configure an IPv4 address on an interface in Cisco IOS XR, use the 'ipv4 address' command in interface configuration mode. RP/0/RP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)#ipv4 address 192.168.1.1 255.255.255.0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-CPU_PRT_D_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver detected a data parity error from the cpu), (Recommended Action: Please try to correct the problem by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install verify packages command in IOS XR?
### Response:
The 'install verify packages' command is used to verify the consistency and integrity of the currently active software packages on the router. It checks for any missing or corrupted files.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_16P_OC48-3-DEVICE_INTR_DISABLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified device is generating excessive interrupts. This message indicates that we are rate limiting the interrupt coming from this device. This indicates a potential HW issue, traffic forwarding (protection switching) may be impacted.), (Recommended Action: Check the fiber or the peer connection. If the problem persist after checking fiber and peer router, please contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_SESSION_DOWN
### Response:
(Severity: 6), (Category: L2), (Description: The OAM session has ended. Either it has been deconfigured, or no response has been received from the OAM peer in the configured time interval.), (Recommended Action: Check that the remote peer is correctly configured still. If it is, then a large number of packets may be being dropped on the link.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-MIB_DLL_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered in the PTP MIB DLL. Some functionality of the PTP DLL may be impaired. The error message contains details about the source of the error.), (Recommended Action: It is unlikely that this condition will recover automatically, restarting the snmpd_infra process may be required. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-RX_MACRO_SPEED_MISMATCH
### Response:
(Severity: 1), (Category: FABRIC), (Description: Unexpected macro type value read from ASIC. There could be a h/w or FPGA issue.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power greater than or equal to the high Tx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-3-DUP_INST_ID
### Response:
(Severity: 3), (Category: ROUTING), (Description: This indicates that RCMD has detected a duplicate instance of the protocol that it is monitoring. It is a very rare condition arising out of a race condition and can affect RCMD feature working.), (Recommended Action: This will affect the RCMD monitoring for the reported protocol instance. Workaround is to restart the reported routing protocol instance. Report to Technical Support for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-PLIM_GENERATION_INCORRECT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that this is invalid PLIM and this PLIM is not suitable with present MSC.), (Recommended Action: Replace PLIM with correct generation PLIM)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-7-ERR_ECM_REG
### Response:
(Severity: 7), (Category: L2), (Description: ASIC Error library encountered an error while setting up a SYSDB notofication handler with the event connection manager.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-UNLINK_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A file involved in the current request or operation could not be unlinked. This may impact install infrastructure functioning.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_LIB-7-DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when cleaning up debug.), (Recommended Action: This is not a critical error message and it can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-2-FATAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A fatal error was encountered, and the program exited. A separate thread is created to handle 'fpd upgrade'. If this pthread_create fails, we are posting this CRITICAL error. This might be a rare situation.), (Recommended Action: If the problem occurs, try to issue 'upgrade fpd' again and see the problem goes away. If problem persists reboot the router or LC either manually or via Command line if the router or LC. If that too fails call Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_8P_GE-2-SPA_MAC_ERR
### Response:
(Severity: 2), (Category: L2), (Description: The internal SPA MAC got out of sync. SW needs to reset the device in order to clear the issue), (Recommended Action: If reseting the MAC device fixes the issue, nothing needs to be done. If the reset does not work, the SPA will need to be SW OIR'd. This can be easily checked by doing 'top' on the LC with the issue. If the CPU is very high, the reset did not work.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_MPLS_EA-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SSE MPLS-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_GSP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Aggregator was unable to create/join GSP group. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-2-CDR_HEALTH_MONITOR
### Response:
(Severity: 2), (Category: FABRIC), (Description: Driver monitors the ASIC every 25 seconds to look for any CDR Health monitor check fail, possibly due to CDR Reset or CDR misconfiguration.If an error is reported momentarily, it could be a false positive seen during a transient state. In case, the error is seen repeatedly, please take concerned action.), (Recommended Action: Shut/unshut the link. If it doesn't recover, Reload the card)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-6-BAGREG_FAILED
### Response:
(Severity: 6), (Category: ROUTING), (Description: The process failed while attempting to register its external data manager data blocks with SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-DEFAULT_ACTION_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: During the processing of a software change notice, the command to take the default restart action failed. The routine will now fall back on a straight exit.), (Recommended Action: Check the install logs if all the packages are downloaded and install operations completed properly Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-ERR_MEDIA_REGISTER
### Response:
(Severity: 3), (Category: IP), (Description: netio media register or callback error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-3-LOCK_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: An internal Lock/Unlock operation has failed in the RDS library. While trying to acquire/free a lock in RDS Library , an error condition was returned.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-3-PCI_LINK_DOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCIe interface encountered link down error for the device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-NO_RESP_FROM_RMF_SVR
### Response:
(Severity: 3), (Category: OS), (Description: Error in receiving response from rmf svr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysmgr/processmgr<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysmgr/processmgr<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_8_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_CORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE correctable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-WRONG_PLATFORM
### Response:
(Severity: 3), (Category: DRIVER), (Description: The image loaded on the hardware is not correct, verify the hardware platform and image name.), (Recommended Action: Check for the right image to be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-ADV_IP_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The VRF feature is configured without the necessary Adv-IP license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-INSTORCH_STATE_SAVE_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: Install saves its state to disk so that the state can persist over install process restart. An error occurred attempting to save this state to disk. The only recovery mechanism is to restart the install process.), (Recommended Action: This issue can arise when there is not enough space on disk to save the state. To clear disk space remove unnecessary files from the root filesystem of the node(s) in question. If any RPs have insufficient disk space, unnecessary rollback points may be removed using 'clear install rollback id <id>'. After clearing disk space you can retry the operation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-GRE_KEY_OPTION_NOT_REQUIRED
### Response:
(Severity: 3), (Category: IP), (Description: LMA received PBU message with GRE key option. However it expects a non-GRE encapsulation on the tunnel to the peer MAG from which it received the PBU.), (Recommended Action: Note the CoA address and IMSI (if available) from the error message. Run the following commands on the MAG that corresponds to the above CoA address or IMSI. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config | section mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config | section mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ipv6 mobile pmipv6 mag globals<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ipv6 mobile pmipv6 mag globals<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the tunnel encapsulation type for this LMA from the output of the above commands. Run the following commands on the LMA. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config ipv6 mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config ipv6 mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ipv6 mobile pmipv6 lma globals<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ipv6 mobile pmipv6 lma globals<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the tunnel encapsulation type for the above peering MAG from the output of above commands. Change the configuration on the MAG and or LMA to match tunnel encapsulation. If the tunnel encapsulation on both the MAG and the LMA is already GRE, then change the configuration on the MAG to not insert GRE key option in the PBU. If the issue persists, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-LOWMEM_RESET
### Response:
(Severity: 5), (Category: ROUTING), (Description: A SEVERE low memory condition has been encountered on the node where the BGP process is running, and so to free some memory, BGP has reset a neighbor. BGP will continue to reset neighbors periodically until the low memory condition abates. The neighbors which are reset will be shut down until a 'clear bgp' command is used to bring them back up. They will not come up automatically when the low memory condition abates - this is to prevent the node oscillating between memory states.), (Recommended Action: Free some memory on the system or correct the condition causing the low memory problem, and then use the 'clear bgp <address>' command to re-enable the neighbors that have been shut down. The 'show bgp all all summary' command can be used to easily see which neighbors are affected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLDP-5-BRANCH_DELETE
### Response:
(Severity: 5), (Category: ROUTING), (Description: A mLDP branch has been deleted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-PHASE2_NON_FATAL
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server has failed to complete phase 2 initialization. For this instance of the server the failure is not fatal; some services are still available, in particular if the aux port is running ksh then this should still be running unimpacted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-PLL_CLK_EXTERNAL_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: External Pll clock lock failed.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_1_XAUI_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error - 1 from XAUI on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV4_EA-5-DEBUG
### Response:
(Severity: 5), (Category: PLATFORM), (Description: SSE IPV4-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-VPWS_SEAMLESS_INTEGRATION_STATE_CHANGE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INTERNAL_REMOVE_OPERATION_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: Internal install remove inactive operation failed during config remove. This is a recoverable issue but might cause space crunch later when new packages are added.), (Recommended Action: The reason for this install operation failure has to be analyzed. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-FETCHING_COMPLETED
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP has successfully fetched the provisioning file from the server. ZTP proceed with provisioning.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-5-SECURITY_DAI_VIOLATION_AC
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_EVM_CONNECTION
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB encountered an error while attempting to connect for event notification from event manager. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-4-RESERVE_IN_PROGRESS
### Response:
(Severity: 4), (Category: LICENSE), (Description: None.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAPS-6-POOL_BLK_TRP_DONE
### Response:
(Severity: 6), (Category: IP), (Description: All Ip addresses belongs to the blocked pool is now release. This range in now available to be asinged to a new pool. TRAP is genaretd to indicate the same to remote Management Servers.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-ERR_FORK
### Response:
(Severity: 3), (Category: IP), (Description: Internal error in forking child process.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIER-0-PCIE_FATAL_ACCESS_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A PCIE access error was detected for controller Card. The error prevents this card to perform some vital tasks making it unusable), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-ENV
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Could not update environment variables due to the error'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-NULL_FINT_IDB
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR1_INTR_FIFO_URUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR1_INTR_FIFO_URUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-LTRACE_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace initialization failed. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-6-ERR
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel mesh feature?
### Response:
The MPLS TE auto-tunnel mesh feature enables the automatic creation of a full mesh of MPLS TE tunnels between a set of routers. It greatly simplifies the provisioning of TE tunnels in a full mesh topology. Auto-tunnels are created between each pair of routers in the specified mesh group.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
flash_platform-3-OPEN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: We will perform the stale byte check on: * - SP cards * - if the device is '/bootflash/' If the platform unable to open the device to perfom stale byte check ,then above error message will occur.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_ISSU_DONE
### Response:
(Severity: 1), (Category: INSTALL), (Description: The entire ISSU operation has completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IRM_CHKPT-7-INIT_ERROR
### Response:
(Severity: 7), (Category: HA), (Description: An error was encountered during intialization of the checkpoint library. The message should indicate the error condition. This is most likely due to a coding error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-MDR_REINITIATE_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'MDR initiate call again after MDR shutdown start.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the two main components of configuration management in IOS XR?
### Response:
The two main components of configuration management in IOS XR are control plane configuration management and data plane configuration management.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How is the OSPF router ID determined?
### Response:
The OSPF router ID is determined in this order: 1) Explicitly configured router ID, 2) Highest IP address of any loopback interface, 3) Highest IP address of any physical interface. It is best practice to configure a loopback and set the router ID manually for stability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RGMGR-4-ERR_RIB_BATCH_SEND
### Response:
(Severity: 4), (Category: INFRA), (Description: Redundancy Group Manager encountered an unexpected error while sending a batch of FRR updates to the RIB. This may be a resource starvation problem, or a problem with RGMGR's connection to the RIB, or an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the RGMGR process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-CARD_POST_IMAGE_NOT_AVAILABLE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The check of the IFD diagnostic image returned failure as the PIE is not installed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE4_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE4_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IP_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Here is a list of possible reasons for this message (not all-inclusive). - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Resource limitations. This condiation indicates a problem where the software has limited resources to operate on.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show memory location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install activate auto-abort-timer command in IOS XR?
### Response:
The 'install activate auto-abort-timer' command is used to set a timer for the automatic rollback of an installation if the user doesn't commit the changes within the specified time. This provides a safety mechanism to revert to the previous software set if something goes wrong during the installation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-INTF_CREATE_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: QMgr encountered an error during the allocation of queueing resources within a queuing asic as part of interface create.), (Recommended Action: Interface create failed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-6-READ_SHM_ENCAP
### Response:
(Severity: 6), (Category: L2), (Description: Debug Information - Displaying Encapsulation, shim and flag for the requested handle), (Recommended Action: No action is required..Informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-7-DMAC_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: %s- debug info.), (Recommended Action: debug info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-ADJCHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: A BGP neighbor has either come up or gone down. This message appears only if the <Bold>bgp log neighbor changes<nobold> command is configured for the BGP process.), (Recommended Action: This informational message normally appears as routers and BGP neighbors go up or down. However, unexpected neighbor loss might indicate high error rates or high packet loss in the network and should be investigated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_PERF_DATA_POOL_EXHAUSTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-CONFIG_ENQUE_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Config out of sequence message enque failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-BENCH_MODE_DETECTED
### Response:
(Severity: 4), (Category: DRIVER), (Description: The BENCH MODE is used for debugging the card out of the chassis, the jumper or DIP switch to enable this feature should not be set if the card is being inserted in the chassis.), (Recommended Action: Remove the setting before inserting the card back to the chassis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-1-CHASSIS_ID_MISMATCH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'V2 or newer power module in a chassis with a backplane IDPROM configured for V1 modules'), (Recommended Action: 'Reprogram the chassis backplane IDPROM, or replace the power module')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-TCAM_CHUNK_MAX_MAC_LIMIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Maximum allowed MAC entry count is reached in the TCAM MAC chunk), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-6-CHKPT_RESTORE_ERR
### Response:
(Severity: 6), (Category: SECURITY), (Description: The checkpoited data entry is corrupted as clean flag id was not valid for this entry.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_ECD-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_LIB_COMMS-3-SYSTEM_ERROR
### Response:
(Severity: 3), (Category: HA), (Description: A call to a system function failed with the specified error code.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-4-MACSEC_CIPHER_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: Higher strength Macsec Cipher(GCM-AES-256/GCM-AES-XPN-256) is configured than the MKA cipher(AES-CMAC-128) This is not recommended from a security purpose .), (Recommended Action: Review the MKA cipher(AES-CMAC) config and the macsec cipher(GCM-AES) config and ensure that the MKA cipher is either of the same or higher strength than macsec cipher .)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_NI_INTR_CRC_ERR0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_CRC_ERR0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FAILED_SYSDB_CONNECT
### Response:
(Severity: 4), (Category: INSTALL), (Description: Insthelper was unable to connect to local sysdb, insthelper will retry), (Recommended Action: This error will be recovered automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR_CLIENT-3-GEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with the server process. It may be caused due to invalid api arguments by client process or a transient condition while the server process is initializing the ASIC), (Recommended Action: This message may indicate a transient condition while the card is booting up. Please check if the error message is seen continuously even after the card has reached IOS-XR RUN state. And if so, then try to power cycle the card. If the message is seen in every power cycle after the card is in IOS XR RUN state then please contact tech-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_TM_ATTACH
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to allocate a managed timer identifier and assign to it an event handler.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-3-ERR_HW_HARD_THRESHOLD_RESET
### Response:
(Severity: 3), (Category: L2), (Description: A hardware error reached threshold on the Datapath FPGA. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause hard reset of a device in the data path and will impact traffic. Device: %s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a multicast routing instance?
### Response:
To configure a multicast routing instance, use the 'multicast-routing' command in global configuration mode. RP/0/RP0/CPU0:router(config)#multicast-routing address-family ipv4
RP/0/RP0/CPU0:router(config-mcast)#interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-mcast-if)#enable
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_TL_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR Tail memory error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-REGISTER_EVM
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to register its verification and apply handlers for SysDB events. Such errors are not expected and should go away with process restart domain_services.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-INVALID_PATH
### Response:
(Severity: 7), (Category: SYSDB), (Description: An operation has been attempted on a part of the SysDB namespace that should not be used.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWCMD-3-VALIDATE_LENGTH
### Response:
(Severity: 3), (Category: SNMP), (Description: 'The failure pertains to show commands in snmp to validating the data length ' 'This does not indicate feature failures or issues'), (Recommended Action: 'This log does not indicate a system impact.' 'all show snmp CLI's for debugging purpose only' 'Recommend customer to re-try the command.' 'If there is no output, reconfigure the snmp settings and re-try')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV4_EA-3-CRITICAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA IPV4-EA, Critical error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-COND_SIGNAL_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver was unable to signal that that status variable was ready to be read.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the configuration rollback feature in IOS XR?
### Response:
The configuration rollback feature in IOS XR allows you to revert the configuration to a previously committed state. This is useful for quickly recovering from configuration errors or rolling back to a known good configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_EA-3-NOT_FOUND
### Response:
(Severity: 3), (Category: SERVICES), (Description: The VASI EA process received a request to process an interface that does not exist in its database. This indicates some sort of internal inconsistency.), (Recommended Action: It may help to restart the VASI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-gsp_msg_failed
### Response:
(Severity: 3), (Category: OS), (Description: The internal communication channel among pctl threads is broken.), (Recommended Action: Must restart the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-CORRUPT_ARG
### Response:
(Severity: 7), (Category: INSTALL), (Description: Value of a parameter passed to function appears to be corrupt. The current request or operation will not be carried out.), (Recommended Action: Try to re-acquire the pie files from the cisco respository referred to you. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-ERR_SYSDB_DISCONNECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospf_uv process was unable to unbind from SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_3_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-QUERY_PEERS_TIMED_OUT
### Response:
(Severity: 7), (Category: OS), (Description: Ticket request timed out.), (Recommended Action: This is a Debug message. No action required. If problem persists,contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-GET_PROCINFO_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Dumper collects all the process related data by using system call devctl. If a devctl fails, then the core file will be incomplete. This will not impact the system.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_UNKNOWN_KEYWORD
### Response:
(Severity: 3), (Category: OS), (Description: There is an unknown keyword in a policer definition. The policer may be assigned default characterstics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TP_ALARM-4-TUNNEL_STATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MPLS-TP tunnel changed state.), (Recommended Action: If the state change is unexpected, confirm the local configurations as well those LSRs on the path of the LSPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV-7-MSG_TIMER
### Response:
(Severity: 7), (Category: ROUTING), (Description: An error occurred during the initialization of global master or parent timer. The text of the message displays the failed operation with the error code. Process cannot continue execution in the absence of above timers.), (Recommended Action: Wait a few minutes and attempt to restart the LSPV_SERVER process. If the issue persists and a standby route processer (RP) node is available, switching over may help resolve the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-4-RSVP_TE_TUNNEL_BURST_INTERVAL_STRETCHING_ACTIVE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The requested PPS of RSVP-TE Tunnel delay measurement sessions is more than can be supported. The configured burst interval will be increased to ensure probe packets sent per second do not exceed the maximum allowed PPS. The RSVP_TE_TUNNEL_BURST_INTVL_STRECTHING_INACTIVE syslog will be issued once this condition is cleared.), (Recommended Action: Configure a larger RSVP-TE Tunnel delay measurement burst interval.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_CFGMGR_DELETE
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-BUS_CRITICAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCIe bus error has occurred. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_ABORT_NODE_DOWN
### Response:
(Severity: 1), (Category: INSTALL), (Description: Quickstart operation aborted because the specified node was not ready.), (Recommended Action: The reason for this Quickstart operation failure has to be analyzed. Collect the show tech logs by running 'show tech-support qs' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-IOFPGA_GREEN_MODE_PWR_UPDT
### Response:
(Severity: 4), (Category: DRIVER), (Description: Card manager has received an interrupt for Green mode power on the IOFPGA board. This is an update event which may have power up or down, Power down may be caused by power fault in one of the green mode power rails of the IOFPGA board specified in the log.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_TS_UPDATE_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Timestamp update error on NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-0-SOFT_ERROR_RELOAD_RECOVERY_3
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Soft error detected on bridge FGPA instance 3. Card will be reloaded to cover from this error.), (Recommended Action: Soft error are very rare due to Cosmic and other environmental factors. The probability of soft error on same device again is extremely low. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-6-PIO_INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message indicating that access size should be 4 or 8), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV4_EA-5-DEBUG
### Response:
(Severity: 5), (Category: PLATFORM), (Description: DNX IPV4-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOS_PORTQ
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-3-MQ_OPEN
### Response:
(Severity: 3), (Category: HA), (Description: Process hit a messege queue error.), (Recommended Action: Restart the process. If error persists, contact TAC with 'show cdm trace jid all' logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-PREDICT_AVL_TREE
### Response:
(Severity: 7), (Category: INSTALL), (Description: An unexpected error occured in the internal datastructures of the Package infrastructure. The current operation or request cannot be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_EA-6-ERR_IMP_MULTIPLE_NTFCNS
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: A batch from IMProxy contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the PPPoE EA. No problems should be seen as a result.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-LFA_FRR_INVALID_CARD_TYPE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: LFA FRR is not supported for IPv6 when the protected or backup path is hosted on a non-Taiko line card. However, LFA FRR may still work if the protected and backup paths are hosted on different line cards, but FRR traffic loss times are not guaranteed.), (Recommended Action: Make sure that both the protected and backup paths are hosted on Taiko line cards. This can be done in a few ways in the IGP config for fast-reroute, such as excluding certain interfaces or specifying lfa-candidates for the LFA calculation for each protected link. Refer to the routing configuration guides for ISIS and OSPFv3 for more details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-NODE_NORESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the reset request caused by a critical alarm or heartbeat loss will not take effect because the node is being put in NMON state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSDB_REG_NOTIFY_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Sysdb notifier registration failure. This will impact the behavior of the dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ATM_V2-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: ATM SPA OC3/OC12 informational message), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-AAA
### Response:
(Severity: 3), (Category: MGBL), (Description: An AAA operation carried out by the HTTP CLI Agent returned unexpected results.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_SC_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised by BITS transmitter when internal short-circuit resistance is approx 25 ohms or less.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-DISCOVERY_SLIP
### Response:
(Severity: 4), (Category: ROUTING), (Description: Heavy CPU load or process blockage resulted in slip of discovery transmission. This may result in session/adjacency flap.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR provide a secure operating system?
### Response:
Cisco IOS XR provides a secure operating system by implementing a microkernel architecture where most processes run in their own protected memory space. A failure in one process does not impact the kernel or other processes. Processes can also be restarted without impacting the entire system.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-MALLOC_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Allocating memory to a shim window failed due to one of the following reasons: 1. Invalid arguments passed to the function 2. Insufficient memory 3. Error occured while performing memory related operations), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to register for verification of changes to its configuration data.), (Recommended Action: Restart of EIGRP might solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-UNSUPP_RX_NON_CH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Rx POD detects an unknown error on a pod. The pod might not be functioning properly, and can cause cell drops, or corruption from received cells. There can also be a software bug such that the error is not handled), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT_HDR_EXT_FIFO_OFLOW_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt hdr ext fifo overflow on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Verify process is up and running, give CLI: If it is still non-operational, use CLI: If it is still non-operational, perform RSP switchover or card reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_DELETESG
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_SHADOW_WRITE_LIMIT
### Response:
(Severity: 7), (Category: OS), (Description: shadow write limit exceeded.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-ERR_MEM_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-SETPRIO_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Changing locald priority failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_1_NPU_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-1 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-SRC_DST_CONFLICT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: It is not allowed to configure a tunnel with same pair of source and destination as an existing tunnel in the system. On display of this message user must change the source address or destination address to a unique pair of addresses that does not exist in the system. On successful resolution of this conflict, the tunnel interface state will be set back to UP state, provided the other criteria to bring up the interface are satisfied.), (Recommended Action: Modify source or destination address of the tunnel that caused the conflict to make a unique pair of source and destination that does not exist on any other tunnel on the box.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ERR_PATH_ELEM
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an error associated with path element operation, most likely due to low memory conditions. BGP may not operate correctly until the process is restarted.), (Recommended Action: Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-ELO_LB_STATE
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to retrieve the 802.3 Ethernet Link OAM loopback state of some physical interfaces, in order to report the state correctly in outgoing CCMs. This situation could indicate a problem in the Ethernet Link OAM daemon (elod) process, or that system resources are low, or a problem with another part of the system. It is likely that the interworking state reported in outgoing CCM messages will be incorrect.), (Recommended Action: Restarting the CFM Daemon or Ethernet Link OAM Daemon may help to resynchronize the loopback state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd' and 'process restart elod' on the node with the affect interfaces. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_9
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port 9.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port 9 interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_M_FREE_EMPTY_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast free pages empty on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-PROT_SERVER_INIT_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: BFD could not initialize itself as PFI fast protect server, PROT_SERVER_BFD, since PFI fast protect infrastructure returned failure. BFD will continuously retry initialization in the background until successful. However, until successfully initialized, BFD session failure can not generate PFI fast protect event for PROT_BFD_SESSION_DOWN, which may prevent fast-reroute from being triggered.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_ASYNC_FIFO_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU async FIFO full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TEJAS_DRV-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message is used to report TEJAS DRIVER generic errors.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_PFILTER_EA-7-INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of packet filter process has failed due to one of the following reasons: 1) Failed to initialize ltrace. 2) Failed to register with debug. This would prevent process from logging debug messages. 3) Failure to connect with SYSDB. 4) Failed initialize internal permit/deny entries for IPv4/IPv6. These entries are needed for programming/removal of hardware entries for IPv4/IPv6 security ACLs. 5) Failed to initialize connection with interface manager proxy service. 6) Failed to initialize RLB (range logic block) checkpoint. This is needed for checkpointing range logic block information for restore on process restart. 7) Failed to initialize Feature EA DLL API needed for programming of hardware resources. 8) Failed to initialize callback function from Feature EA DLL for compiling IPv4/IPv6 TCAM entries needed for security ACL programming in hardeare. 9) Failed to initialize callback function from Feature EA DLL to handle reprogramming of RLB and IPv6 source prefix compression table request from TCAM manager. 10) Failed to initialize feature checkpoint info. This is needed for checkpointing IPv4 and IPv6 security ACLs programmed in hardware. 11) Failed to initialize callback functions from ACL configuration manager to perform hardware resource checks and ACE resequencing. 12) event_block failed. This indicates process has encountered unexpected error while waiting for events. 13) Failed to initialize callback functions for receiving incremental updates for IPv4/IPv6 security ACL configuration.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-AUTO_ABORT_TIMER_STOPPED
### Response:
(Severity: 4), (Category: INSTALL), (Description: The auto-abort timer has been stopped.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_BAG_DECODE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth adjustment threshold feature?
### Response:
The MPLS TE auto-bandwidth adjustment threshold feature specifies the percentage difference between the current tunnel bandwidth and the measured output rate that triggers an auto-bandwidth adjustment. A lower threshold means auto-bandwidth adjusts the tunnel bandwidth more frequently, while a higher threshold means adjustments occur only for more significant rate changes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR bandwidth protection feature?
### Response:
The MPLS TE FRR bandwidth protection feature allows bandwidth to be reserved for backup tunnels to ensure that sufficient bandwidth is available for fast reroute traffic after a failure. It prevents backup tunnels from being used for other traffic and ensures that FRR can always redirect traffic successfully.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG_CLIENT-4-ASSERT
### Response:
(Severity: 4), (Category: INFRA), (Description: The SERG client process hits some abnormal condition. These warnings will not affect functionality of SERG.), (Recommended Action: Collect the traceback associated with this Log and contact the engineer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-PUBLISH_DELETE
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error has occurred while indicating the deletion of the given service attachment removal to nodes other than that local to the interface indicated. Packet diversion may now be inconsistent. The error string will give more detail on the type of error that has occurred.), (Recommended Action: For non-resource errors, adding and removing a service attachment for the interface indicated in the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_ISOLATION-7-SUCCESS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicates that the requested node isolation action completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-3-RX_MISS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Some packets are dropped due to receive buffer overflow in DMAC device. The CLI above will show which queue dropped the packet. This would in general indicate an unexpected CPU busy condition wherein the software is slow in processing packets.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-CTP2_PWR_SUPPLY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: --), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-MSG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: A unexpected failure has been detected while MPP configuration was being applied.), (Recommended Action: Restarting the concerned process might solve the issue. If the message recurs, issue the following command 'show mgmt-plane trace client <clientname> both' to gather data and provide the gathered information and the exact error message as it appears to the Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_CPU_HP_TAIL_DROP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress Buffer and Scheduling to CPU high priority tail drop.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TURBOBOOT-3-INVALID_DEVICE
### Response:
(Severity: 3), (Category: INSTALL), (Description: The TURBOBOOT setting in ROMMON was enabled, but the requested device is unavailable. The EASYBAKE/TURBOBOOT variables are cleared. The node will be reset. Please repair the device and retry the boot sequence.), (Recommended Action: Check for boot device corruption by running disk checks using 'fsck' disk check CLI. Based on the outcome of disk check take corrective action and retry turboboot.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-KERNEL_CORE_TRIGGERED
### Response:
(Severity: 2), (Category: INFRA), (Description: To allow for triage of an issue involving the kernel, a kernel core had to be automatically created.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-SETS_REBUILD_INCONSISTENCY
### Response:
(Severity: 7), (Category: ROUTING), (Description: The policy_repository process failed to rebuild the set references for the policy in question. This will result in an inconsistent state in the policy_repository and the process should be restarted. This could result in policies not functioning properly.), (Recommended Action: The policy_repository process should be restarted to clean up the internal inconsistency. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you initiate a system reboot after software installation in Cisco IOS XR?
### Response:
A system reboot after software installation in Cisco IOS XR can be initiated using the 'install reboot' command, which restarts the router to apply the new software configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE1_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE1_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTT1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-2-TX_CH_FAULT
### Response:
(Severity: 2), (Category: FABRIC), (Description: The Tx POD detects a fault on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption in the downstream.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC16
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: Internal Warning.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_PKT_F2_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 2 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-LOCK_NOT_RECOVERABLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to make the mutex in consistent state results in not recoverable state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAISYDUKE_DRIVER-4-DD_USBPASSIVE_INFO
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates insertion or removal of usb passive modules), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APP_OBJ-3-NULL_PARAM
### Response:
(Severity: 3), (Category: MGBL), (Description: This is an internal error that invalid parameter is encountered.), (Recommended Action: Contact TAC and provide required_info, which will be used only for internal diagnosis purpose.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-3-INVALID_RSP
### Response:
(Severity: 3), (Category: OS), (Description: MB response packet error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-CONFIG_BATCH_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: XLNCd has received updates from the Linux kernel about interface attributes. XLNCd has then tried to apply these updates as IOS-XR configuration, but hit an operational error.), (Recommended Action: If the problem persists, restart the process. If the problem persists through process restarts, If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPGALIBASGARD-3-FPGA_PLL_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error occurred due to fpga PLL lock failure.The PLL lock has reached the maximum retry.), (Recommended Action: Configure and remove loopback in the interface level using CLI -loopback line -no loopback This will reset the PLL. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB-3-HW_INIT_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the Platform LC Hardware in L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-2-CONN_OPEN_FAILED
### Response:
(Severity: 2), (Category: OS), (Description: lpts_pa process from v2 failed to connect to lpts_pa in v1), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDS-4-FAILED_PARTNER_NODE_STATE
### Response:
(Severity: 4), (Category: INSTALL), (Description: While synchronizing a reload between a node and its partner, the state of the partner node could not be ascertained.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_ATOM-6-DEBUG_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB ATOM component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-BADSFP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: nV Edge Control ports needs Cisco supported SFPs.), (Recommended Action: 'Plug in a Cisco supported 1Gig SFP')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-CALL_ALLOC
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The VPDN CALL infra has failed to allocate memory. This may be due to low memory conditions on this particular RP/LC, or this client may be using more memory than it is allowed.), (Recommended Action: Reduce system scale.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-WRONG_FLOW
### Response:
(Severity: 3), (Category: OS), (Description: 'GSP flow zone information is incorrect.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_MQ_FULL_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 0 MQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-DEV_CFP_COMPLIANCE_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A compliance error was detected during CFP initialization. A compliance error is due to checksum error, EEPROM CRC error, vendor data error, or decryption error. The CFP is the pluggable optics on the line cards. CFP initialization may happen when linecard boots up, CFP OIR and line card process restart. The optics will not be enabled if an CFP compliance error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install activate auto-abort-timer command in IOS XR?
### Response:
The 'install activate auto-abort-timer' command is used to set a timer for the automatic rollback of an installation if the user doesn't commit the changes within the specified time. This provides a safety mechanism to revert to the previous software set if something goes wrong during the installation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-SOCKLITE_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process will exit, since it failed to initialize the sock-lite data base. The process will respawn itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-CARD_FAILURE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicates a generic failure in the invmgr w.r.t the cards in the inventory. This can be a any failure that occurs commonly either during bootup or in RUN state), (Recommended Action: These failures need to be reviewed by the DE to ensure the issue severity. Please contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-BYPASS
### Response:
(Severity: 6), (Category: DIAG), (Description: This is an informational message stating that diagnostics testing was not performed on the card because diagnostic testing was disabled in the user configuration.), (Recommended Action: This behavior is consistent with the user configuration and no action needs to be taken. If you want to run bootup diagnostics, enable bootup diagnostics by using the diagnostic bootup command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-SHIP_INFRA
### Response:
(Severity: 3), (Category: L2), (Description: ship_infra registration failed.), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-script_failed
### Response:
(Severity: 3), (Category: OS), (Description: Failed to run a script to collect debug information.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-HIST_UPDATE_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: When updating the history, a write to operation history failed. This should not affect the install operation, but means that operation history may be incomplete or inconsistent.), (Recommended Action: If the issue persists, please obtain the output from the console or system log, and the entire output of the following commands: <CmdBold>show tech-support install<noCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-2-INTR
### Response:
(Severity: 2), (Category: L2), (Description: A CPP hardware interrupt has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the jacket driver to indicate anomolies which are not critical. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-FALLBACK_SESSION_STOP
### Response:
(Severity: 5), (Category: L2), (Description: The MKA Session identified by the interface, and CKN is getting terminated. Possible reasons could be macsec config delete on the interface (or) no active pre-shared key present for the given CKN), (Recommended Action: If this is not expected, contact cisco-support by sharing the tech-support macsec.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-HIGH_VOLTAGE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ voltage greater than or equal to the high voltage warning threshold. The QSFP+ is the pluggable optics on the line cards. The voltage threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-IO_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the IO thread in the speaker process. The process will be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-ERR_IF
### Response:
(Severity: 3), (Category: L2), (Description: The SPA driver on the linecard failed to call SONET controll or POS interface related system function. The issue may affect the creation of SONET controller or POS interface while the SPA is booting, reloading or SFP OIR with different optics rate. %s - error message indicating location and the reason of the error), (Recommended Action: - Try to do the SFP OIR for a few more times; - If the issue persists, reload the SPA with the command: hw-module subslot 0/x/x reload then check if all the POS interface are created, if not, reload LC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_THREAD_MUTEX
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an unexpected error performing a mutex operation. The process may restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-ERR_ASIC_OOR
### Response:
(Severity: 6), (Category: FABRIC), (Description: Ingressq block is unable to get packet memory for the incoming packets. This condition is caused by over subscription or hitting the Packet Per Second rate. This will affect the QOS. Thus it is recommended to reduce the packet rate to this MSC.), (Recommended Action: Reduce the incoming packet rate to this MSC as under the OOR condition the QOS If the OOR is seen in non-oversubscribed case, contact TAC Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-ADM1066_WRITE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message indicates write failure on ADM1066 device.), (Recommended Action: Please try to collect error code and verfy the address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBC-2-CANBUS_PWR_SEQ_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CBC alarm indicating that the power up sequence has failed. The proper functioning of the board requires that a successful application of power be applied to the board in the proper sequence.), (Recommended Action: Reboot the LC. If the problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-PERF_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while trying to Start/Stop the timer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_ETH_MGMT-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error detected when initializing the eth mgmt debug messages. process will restart automatically to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CRRS4_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-2-SDR_PART_PREP_FAILED
### Response:
(Severity: 2), (Category: INFRA), (Description: An internal error occured in the middle of XR partition preparation. This will result in the SDR going to shut-off state.), (Recommended Action: Reload the card to recover. A new XR partition will be prepared upon card reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_REGISTER_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as attach point data was being registered for verification. At this point is would be best to restart the policy_repository to try to clear this inconsistency.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-4-queue_err
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Application tried to handle a buffer not part of queue. Use the CLI 'show controllers backplane ethernet trace buffstat location <node>*' to determine if there is a queue leak.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB_CLIENT-3-GEN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with the server process. It may be caused due to invalid api arguments by client process or a transient condition while the server process is initializing the ASIC), (Recommended Action: This message may indicate a transient condition while the card is booting up. Please check if the error message is seen continuously even after the card has reached IOS-XR RUN state. And if so, then try to power cycle the card. If the message is seen in every power cycle after the card is in IOS XR RUN state then please contact tech-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_FIND_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred looking up an interface handle from an interface name. This may be due to a low memory condition but is most likely to be an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you configure OSPF interfaces in Cisco IOS XR?
### Response:
To configure OSPF interfaces in Cisco IOS XR, go under the interface configuration mode and use the 'router-id' command to specify the OSPF process. Then use 'area <area-id>' to assign the interface to a specific area. You can also set interface-specific timers, authentication, and other parameters here.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR3_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-3 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of CSNPs and PSNPs in IS-IS?
### Response:
CSNPs contain a complete list of all LSPs in the IS-IS database. They are sent periodically by the DIS on broadcast networks to synchronize databases. PSNPs are used to request missing LSPs from a neighbor and contain a subset of LSPs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_CFEC_AIS_DEM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-STANDBY_SHUTDOWN_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The shutdown of the standby SC/RP node failed during the chassis shutdown process.), (Recommended Action: Please power off the chassis manually.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE7_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE7_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_NSF_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-SHUTDOWN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: TACACS+ process failed to shutdown properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: IP), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB-7-ERR_EXIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An error occurred in arbiter driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-DEBUG_THREAD_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: QNET process tried to create event debug pthread for the process but encountered an error The process will exit and respawn again), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACSEC_CFG-3-INVALID_CONFIGURATION
### Response:
(Severity: 3), (Category: L2), (Description: Cannot configure hw-module macsec-mode location all if LC nodes are already configured. Remove that configuration before attempting to configure for all.), (Recommended Action: Informational, configuration error to be fixed before commit.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-LISP_TOP_RLOC_AUDIT
### Response:
(Severity: 4), (Category: IP), (Description: 'This message is a warning that one or more ' 'configured router lisp instances are missing the ' 'locator-table configuration. Without this configuration, the ' 'lisp instance is not operational.'), (Recommended Action: 'The operator must configure the ' 'locator-table below the router lisp instance(s), or ' 'router lisp instances which are no longer required should ' 'be unconfigured.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-ILLEGAL_CBC_VERSION
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational condition and/or failure. The process can continue functioning as expected despite the failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-NO_I2C_TOPO_FILE
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was not able to retrieve I2C topology file to perform basic driver initialization. Process will be restarted to attempt to recover from this.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOPPER-3-IO_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA process failed to read/write. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_DOM_SENSOR_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is raised when DOM sensor on a satllite port crosses either high or low threshold limits for that sensor type.), (Recommended Action: If the problem persists provide output of: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(RP)# show controllers <i/f> phy <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(RP)# show controllers <i/f> phy <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different ways to monitor processes in Cisco IOS XR?
### Response:
Cisco IOS XR provides several commands to monitor processes, such as 'show processes', 'show processes cpu', and 'show processes memory'. These commands display information about running processes, CPU utilization, memory usage, and other process-related statistics.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-1-CONSOLE_SESSION_ANYWAY
### Response:
(Severity: 1), (Category: MGBL), (Description: The RS232 DLL tried to apply a template to the console and failed, but we are attempting to start a session anyway to try and ensure that it's possible to log onto the router from the console. This may mean it's impossible to gain terminal access any other way (ie via telnet, ssh, etc).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>*param*<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>*param*<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show running-config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-2-ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-INIT_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Network Processor Initialization encountered a critical error that renders the system unusable.), (Recommended Action: Check if the board comes up fine after the LC reboot. If the board does not recover - it will need to be replaced.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-6-COMMAND_LINE_ARGS
### Response:
(Severity: 6), (Category: MGBL), (Description: Command line arguments were passed to the VTY Device DLL when it was initialized. It does not expect to be passed any arguments.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-6-CEMGBL_GOT_NOTIF_FROM_INT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Cemgbl got notification from INT switch and displays the count and 1st index of it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZEN-3-HARDWARE_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The message indicates that the pci initialization for the Zen FPGA had failed. As a result, the Zen driver cannot initialize the Zen FPGA, and exits.), (Recommended Action: Zen driver, as a mandatory process, is restarted automatically upon exit. After multiple restart, procmgr will bring to failed state. In such scenarios, first, collect the Zen driver traces, and router logs for debugging. Then, reload the card)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-OPERATION_SUCCESS
### Response:
(Severity: 2), (Category: INFRA), (Description: Specified install operation in the message finished successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-3-ERR_QAD_SET_WM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to set the watermark of the indicated qad queue. This should be because of some issues with the qad queue %s - high or low watermark %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-INTERNALERR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-BAY_OPTICS_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: OPTICS enity is removed from the line card), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_7_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IFINIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPFv3 failed to initialize data structures for an interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show ospfv3 interface <intf name> - show running-config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE0_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE0_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-3-MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: This is a generic error msg for memory allocation failure. The Process tried to allocate a memory and it wasn't succesful. Can happen when system is running low in memory), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-TAM_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: TAM Error error observed while interacting with TAM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-LOS_INFO
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-FATAL_AER_RECEIVED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. Fatal AER is received. This issue may be SFE ASIC is not responding to PCIe transactions. 2. There is a uncorrectable PCIe error.), (Recommended Action: PON Reset the ASIC. Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. 'show processes sfe_driver location <loc>' 2. Collect all traces: 'show controller sfe trace all location <loc>' 3. dmesg and /var/log/messages from host and sysadmin VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_LA_QOS-2-HW_LOCK_ACQUIRE_FAILED
### Response:
(Severity: 2), (Category: QOS), (Description: Prior to taking action to update device, global HW lock must be taken. This message shows up if the lock is not acquired.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SIGEMT
### Response:
(Severity: 4), (Category: OS), (Description: Signal info), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-PDMA_RAM_PARITY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates an uncorrectable parity error occurred on this internal SRAM. %s - name of ram that error occurred %x - key of error node recorded %s - error data), (Recommended Action: if this happen continous, reload the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-7-ERR_REGISTER_GET
### Response:
(Severity: 7), (Category: FABRIC), (Description: An attempt to read a Hardware register failed. This could result in inconsistent behavior of the device.), (Recommended Action: Run diags on the board and contact TAC support. If it is possible to isolate the trigger point for the read failure, collect all the necessary condition that caused the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_EVENT_CONN_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for disconnection or connection error event. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_MLIB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed while initializing multicast library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-UPDATE_ERR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate errors that happened during an update event. This error is most likely caused by a temporary situation, so is unlikely to occur. %s - indicates the reason for the failure. %s - is the decoded error reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_TUPLE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The process failed to unpack a tuple.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SI-3-INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the SI process on a particular node. The process will be restarted. Until the process starts successfully, any SI configuration is not accepted.), (Recommended Action: Retry the config/show operation after SI process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISK_DRIVER-3-FAILED_TO_CREATE_THREAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: pthread_create() returns error. If this occurs , event related operations will not occur.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR_CLIENT-3-GEN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with the server process. It may be caused due to invalid api arguments by client process or a transient condition while the server process is initializing the ASIC), (Recommended Action: This message may indicate a transient condition while the card is booting up. Please check if the error message is seen continuously even after the card has reached IOS-XR RUN state. And if so, then try to power cycle the card. If the message is seen in every power cycle after the card is in IOS XR RUN state then please contact tech-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_OVF_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA00 Tx overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_5_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-SHM_INIT_ERR
### Response:
(Severity: 3), (Category: OS), (Description: There was a problem to initialize shared memory file allocation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx - process core of shmwin_svr)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP ORF (Outbound Route Filtering) in IOS XR?
### Response:
BGP ORF in IOS XR is configured to allow a BGP speaker to send a set of route filter conditions to its BGP peer. router bgp 65000
neighbor 203.0.113.7
capability orf prefix-list send
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-5-CLIENT_LIMIT_REACHED
### Response:
(Severity: 5), (Category: TOPOLOGY), (Description: clustermgr received too may connection requests.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Restart erroring process. collect show tech spi *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-4-ENDPOINT_BURST_INTERVAL_STRETCHING_ACTIVE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The requested PPS of Endpoint delay measurement sessions is more than can be supported. The configured burst interval will be increased to ensure probe packets sent per second do not exceed the maximum allowed PPS. The ENDPOINT_BURST_INTVL_STRECTHING_INACTIVE syslog will be issued once this condition is cleared.), (Recommended Action: Configure a larger Endpoint delay measurement burst interval.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabric driver was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_A_DATABUS_STUCK_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI-A databus stuck on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-3-OUT_OF_MEMORY
### Response:
(Severity: 3), (Category: L2), (Description: A UDLD process failed to allocate sufficient memory for its processing. This could be due to a shortage of system resources. The process will restart and attempt to recover.), (Recommended Action: The UDLD process will restart in an effort to recover from the low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-ASYNC_ATTACH_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to attach handler for async events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power greater than or equal to the high Tx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_EDM-3-DECODE_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPV4 could not decode data supplied by the indicated external data manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-ROOT_USERDB_LOCK_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: A lock operation on shared resource, called by locald lwDB failed due to the mentioned error.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-3-IF_VC_CLASS
### Response:
(Severity: 3), (Category: L2), (Description: A vc-class was configured on an interface but couldn't be applied for the given reason. This may happen in case, the vc-class detach or attach events with sysdb return a failure. first %s - vc-class name second %s - interface name third %s - Error string), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-FAN_SPEED_MAX
### Response:
(Severity: 4), (Category: PLATFORM), (Description: High temperature condition of one or more components has caused the fan speed to rise to the maximum allowed for the 40C temperature profile.), (Recommended Action: Ensure chassis has sufficient power modules. Configure 'power budget profile extended-temp' from admin config. Reduce the ambient temperature if possible. Replace the cards that are heating up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered the specified error during the initialization sequence. This facility is deemed crucial and hence the process is automatically restarted on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON_FAN_ALGO-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HD-2-DEV_HARDDISK_DEVICE_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Hard disk encountered media errors), (Recommended Action: This error is a momentary error and software should be able to correct it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_AB_INTR_FIFO_ORUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_AB_INTR_FIFO_ORUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-INTERNALERR_RC
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show tech-support routing ospf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-POLICY_MISMATCH
### Response:
(Severity: 3), (Category: SECURITY), (Description: Phase I policy parameters negotiation failed with peer.), (Recommended Action: 'Contact the remote peer's administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-DEVICE_NOT_READY
### Response:
(Severity: 7), (Category: OS), (Description: no device ready yet for notified feature), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_TSB_LC-6-INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: ACE TSB Informational message), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESDMA-6-MLAP_CONN_LOST
### Response:
(Severity: 6), (Category: INFRA), (Description: MLAP on the given location has restarted or stoped. Hence connection between MLAP and ESDMA has been lost.), (Recommended Action: Check on the MLAP process in the given location)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-7-ERR_RECV_TE_MSG
### Response:
(Severity: 7), (Category: ROUTING), (Description: The process has received an invalid length TE message. As a result, the TE message is ignored and TE tunnel may not come up.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBDLLMGR-4-POSSIBLE_MISSING_INFO
### Response:
(Severity: 4), (Category: OS), (Description: Buffer given to the devctl routine is smaller than required. This will cause missing dll-text segment in the core file.), (Recommended Action: Collect system log information. Collect 'show dll' information from the node which printed this message. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-MD5_VERIFY_FILES
### Response:
(Severity: 7), (Category: INSTALL), (Description: Failed to perform file validity check on each file to see if they are valid or not, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-SRV6_LOC_UPDATE_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing an SRv6 locator update received from the RIB.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-OS_BOOT_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: OS running on the indicated card is reporting a warning condition during bootup.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-SESVI_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: CGN_MA failed to register with SESVI for interface programming notifications. The process will restart under this scenario.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-6-PCI_BUS_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A PCI bus error has occurred. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-DUI_VTP_FAILURE
### Response:
(Severity: 2), (Category: L2), (Description: The NPU ASIC has VTP issue. HW init will fail), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-ERR_BEST_ROUTE
### Response:
(Severity: 3), (Category: IP), (Description: Socket operation failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-FILESYSTEM
### Response:
(Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to carry out a filesystem operation. Installations may not produce the expected results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-CONNECTION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error occurs,if sending message to the server gets failed.), (Recommended Action: Please collect the console log,and the following: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show cef trace loc <>, show cef platform trace all loc <>, show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> Also notice if the error message is transient or persistent. Report to your technical support representative. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-INTF_TOO_LONG
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Each item in the XR_INTERFACES list must not be longer than the maximum interface length.), (Recommended Action: Check the format of the XR_INTERFACES environment variable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_14_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_EVM_CBACK_ATT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register a callback handler due to the error. This is an initialization error and implies that the function in IS-IS will not be able to operate correctly. The IS-IS process must be restarted in order to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_SDFEC_LOF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-3-ERR_SYSDB_BAG_ENCODE
### Response:
(Severity: 3), (Category: L2), (Description: ASIC error library encountered a SYSDB encode error while performing the indicated operation.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_6_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PORT_STATE_CHANGE_ADMIN_TEST
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message indicating that the the admin state of the specified port has changed to test.), (Recommended Action: This is an informational message and does not necessarily indicate a problem. This message is expected when the port's admin state is changed via CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PA_INTR_MAX_SZ_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PA_INTR_MAX_SZ_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-I2C_WR_TIME_OUT
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA I2C write is timed out and did not receive DONE signal.), (Recommended Action: Check the device for which the write has timedout.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-UNEXPECTED_MULTIPLE_RESPONSES
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB Medusa process received multiple responses for a message type for which only a single response was expected.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show mpls traffic-eng fast-reroute database' command in IOS XR?
### Response:
The 'show mpls traffic-eng fast-reroute database' command is used to display the Fast Reroute (FRR) protection information for MPLS TE tunnels. It shows the tunnel name, the protected interface, the backup tunnel used for protection, and the state of the protection (ready or active). This command is useful for verifying FRR protection for TE tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER_RSP4-3-IDPROM_RETRIEVAL_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: Failed to retrieve idprom for the card in a particular slot), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_DAP_POOL_EXHAUSTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_STAT_VEC_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 state error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_DEBUG_INIT_EVENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error related to the debugging subsystem occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_THRESHOLD
### Response:
(Severity: 5), (Category: PLATFORM), (Description: ASIC errors have exceed the threshold.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_0_FAIL_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 0 failure on FIA 1.), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-INTF_REG_DROPPED
### Response:
(Severity: 3), (Category: ROUTING), (Description: An Interface registration operation request received when server initialized in asynchronous mode or vice versa; or when server is not ready..), (Recommended Action: Controller and/or agent must ensure that Interface registration operation requests are sent only when server is ready. If message is still seen after meeting these conditions, contact Cisco for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-HLPR_SYSDB_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The Spa hlpr sysdb init failed due to - A SysDB client attempted to register for verification or as an EDM on a path which was already registered, registering more than once for verificatin is due to multiple RP's present in the node. - spa_cfg_hlpr abort - On restart spa_cfg_hlpr registration for verification may fail - During RPFO %s - Process name %s - error/warning condition), (Recommended Action: Try for process restart If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-COULD_NOT_GET_NODEID
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon failed to determine the ID of the node on which it is running. It will exit, and should be restarted by System Manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-3-BAD_READ
### Response:
(Severity: 3), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens_read API to read, it returned failure. ens_read returned bad len. Underlying GSP/ENS might have some problem), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ABORT_FGID_WRITE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-6-QUEUE_GREEN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an indication queue length is back to normal for dpa client), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_8_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPGAMGR-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The FPGA Manager, interrupt handling thread, failed to spawn. %s-Error Description.), (Recommended Action: Please re-load the FPGA manager. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-MALLOC_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: Unable to allocate memory for message buffer.), (Recommended Action: Check the overall system and process memory usage.If it pertains to the process showing the error, then restarting the process may fix the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Init error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-6-PPU_END
### Response:
(Severity: 6), (Category: FABRIC), (Description: FSDB aggregator has completed Calvados plane by plane upgrade successfully.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_LIB-3-SHMWIN_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Shared memory access operations like init,open or bind might have failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: L2RIB initialization has failed due to the reason indicated in the message. The process shall attempt self recovery by restarting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_PD-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error happened during OBFL initilization), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. .)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPFPGA-3-IOFPGA_ACCESS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IOFPGA access Failure/Success while accessing device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-INT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET0_INTR_CRC16_CHK_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET0_INTR_CRC16_CHK_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETFLOW-4-WARNING_CFG_APPLY
### Response:
(Severity: 4), (Category: MGBL), (Description: This message indicates that a configuration that was previously verified cannot be applied due to the reason specified. This may happen if a configuration that was applied to a Bundle interface cannot be applied due to either resources not being available in the Line Card where the member resides, or some configuration mismatch was detected.), (Recommended Action: Check the reason for the application failure and correct it as appropriate.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-7-ERR_INTERNAL_SW
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver encountered the annunciated internal SW error. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CARD_YELLOW_OVERTEMP
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Card hotspot temperature has risen at or over configured yellow threshold.), (Recommended Action: The customer has configured this threshold. Thus on this alarm , the customer can react accordingly. Card can operate in this range but is above yellow threshold.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BMP-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_HEARTBEAT_FAILURE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected interruption in the periodic 'Hello' messages.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-DEBUGINITFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The debug support initalization failed in the packet server. It will be restarted by sysmgr and should recover.), (Recommended Action: If packet manager is unable to start up after several restarts by sysmgr, please collect the 'sh log' output and contact your customer support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB_CLIENT-3-GEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with the server process. It may be caused due to invalid api arguments by client process or a transient condition while the server process is initializing the ASIC), (Recommended Action: This message may indicate a transient condition while the card is booting up. Please check if the error message is seen continuously even after the card has reached IOS-XR RUN state. And if so, then try to power cycle the card. If the message is seen in every power cycle after the card is in IOS XR RUN state then please contact tech-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnetdscp-4-DSCP_EXTRACT
### Response:
(Severity: 4), (Category: IP), (Description: An error occurred whilst trying to extract dscp configured value. Server will use default dscp value instead.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-ACCT_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: failed to send accounting record), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-SHOW_EDM_CLOSE
### Response:
(Severity: 3), (Category: OS), (Description: Cleanup for EDM failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INVALID_ACT_MSG
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service activate message was received, however, the data it contained could not be interpreted.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-ERR_UNSUPPORTED_GROUP
### Response:
(Severity: 3), (Category: SECURITY), (Description: RADIUS does not support command authorization and command accounting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPHC_PROFILE-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: L3), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Check how much memory is available at the location where the error was reported. If the system has enough memory and if the error message persists, contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-3-ERR
### Response:
(Severity: 3), (Category: L2), (Description: Plim datapath fpga driver errors. Typically these errors indicate failure in system services or bad programming of the hardware.), (Recommended Action: Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth collect frequency feature?
### Response:
The MPLS TE auto-bandwidth collect frequency feature specifies how often auto-bandwidth measures the output rate of a tunnel before making a bandwidth adjustment. A higher frequency means auto-bandwidth reacts more quickly to traffic changes, while a lower frequency means bandwidth adjustments occur less often.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_EVM_ATTACH
### Response:
(Severity: 4), (Category: L2), (Description: SSRP failed to register a handler for the specified class of event. This is an initialization error and implies that SSRP will not be able to operate correctly. The PPP MA process will abort and be restarted in an attempt to recover. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the PPP MA process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-1-OOR_RED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is a severe error message in the OFA module to indicate high usage of OFA resources.), (Recommended Action: Please collect the OFA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-PRM_SSH_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature EA DLL encountered error in completing PRM SSH operation. This can lead to failure of configuration.), (Recommended Action: If this message is seen during adding acl to the interface, then configuration apply will fail. May be retrying to apply the acl conifg will succeed. If seen during removal of the acl config, this may lead to acl configuration hardware inconsistent. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-SYSDB_GET
### Response:
(Severity: 3), (Category: IP), (Description: 'Unable to get/read an item from sysDB '), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_EGR_Q_ERR_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_NETIO-6-DEBUG_REG
### Response:
(Severity: 6), (Category: L2), (Description: Debug message registration failed No significant impact on functionality.), (Recommended Action: Could be a system-level issue, please check if there is sufficient memory on the node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-INIT_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The DPA QoS EA module failed to initialize. The System Manager will restart the EA process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-5-BATCH_ERROR_CODE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified error was encountered in the OSPF RIB batching code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlea-6-NO_MEM
### Response:
(Severity: 6), (Category: L2), (Description: The VLAN EA process was not able to allocate the memory that it needed to complete the operation. VLAN functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-4-IFHANDLE_NULL
### Response:
(Severity: 4), (Category: SECURITY), (Description: Error encountered while obtaining handle for the interface specified as the source interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DATAPATH_FPGA_API-7-ERR
### Response:
(Severity: 7), (Category: L2), (Description: TDatapath FPGA API generated errors.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-4-OOS
### Response:
(Severity: 4), (Category: HA), (Description: A process failed to restore state from a table in the checkpoint store.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PARTITION_USAGE_NORMAL
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: A partition is monitored for critical usage levels. This ios_msg is raised when the monitored partition returns to pre-set normal usage percentage), (Recommended Action: Contact TAC for further support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-DIA_PEER_FLUSHQ
### Response:
(Severity: 3), (Category: SECURITY), (Description: Queue is more than configured limits. Clearing the pending messages. Check 'show tcp brief' for diameter peer connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-PAKBCASTFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server failed to broadcast to message to its clients that it is about to restart.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-DEFAULT_ROUTE_FAIL
### Response:
(Severity: 4), (Category: INFRA), (Description: XLNCd attempts to set the default route for each network namespace to direct traffic out of the to_xr interface. If the corresponding IOS-XR VRF contains a Management Ethernet interface then an IP address from that interface is chosen as the source hint for the default route. This error indicates that XLNCd encountered an error while trying to set the default route in Linux. The impact is that whatever route previously existed will continue to be used, with the likely impact that traffic over the to_xr interface will be sent with the wrong source IP address. This only impacts traffic sourced by native Linux applications running on the box, but note this may include some management applications such as Model-Driven Telemetry, and IOS-XR software installation. There is no impact on data traffic.), (Recommended Action: Restarting the xlncd process may fix the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-CPU_HOG_2
### Response:
(Severity: 6), (Category: HA), (Description: Wdsysmon has detected a cpu starvation situation - potentially a high priority process spinning in a tight loop.), (Recommended Action: Check the system status, including the saved log for evidence of a high priority cpu hog.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-SWITCH_OPERATIONAL
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message indicating that the switch is initialized, configured and fully operations.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-COMMS_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A fatal error was encountered during initialization.), (Recommended Action: If the process does not restart automatically then try manually restarting it. A likely cause for this error is that the system has run out of memory. If this is not an out-of-memory problem and restarting the process does not solve it then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TX_RX_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a timeout on some bus), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-SYSMGR_CORE_OPTIONS_FAIL
### Response:
(Severity: 6), (Category: OS), (Description: Dumper failed to get process core option values from the process init/startup file. Typically because the process doesn't provide its init/startup file, or rarely because dumper shared memory for keeping process core options are corrupted.), (Recommended Action: This is informational message.No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-ERR_NO_INTERFACE
### Response:
(Severity: 3), (Category: IP), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-MUTEX_FAIL
### Response:
(Severity: 4), (Category: INFRA), (Description: A system error was encountered when attempting to acquire or release a mutex. In rare circumstances, this may result in unexpected behaviour in the SLA library, incorrect statistics or unexpected restart of the protocol process.), (Recommended Action: If unexpected behaviour is seen, the system may be recovered by restarting the protocol process on the affected node. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA_CAPI_SERVER-3-IOFPGA_PMBUS_INTR
### Response:
(Severity: 3), (Category: INFRA), (Description: IOFPGA asserted PMBus interrupt , for exact info view the '%s'i msg displayed.), (Recommended Action: This is a informational message.This indicates Fault with temp sensor or PSU module or Fan controller indicated by syslog message,can be ignored on first occurence . In case of repeated msg contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-READ_FAILURE
### Response:
(Severity: 3), (Category: MGBL), (Description: Read or Write operation not possible as there is an error in associating a stream with a file descriptor.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CLOCK_CONFIG_NOT_SUPPORTED_IN_HARDWARE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Due to limitations in ASR9000 RSP frequency synchronization hardware, certain combinations of clock-interface config are not supported. If one clock-interface (sync 0 or sync 1) is configured in any of these modes: clock-mode bits-input t1 clock-mode bits-output t1 clock-mode bits-output 6m-output-only then the following configurations for the other clock-interface are prohibited: clock-mode bits-input e1 clock-mode bits-input 2m clock-mode bits-output e1 clock-mode bits-output 2m Note that 'clock-mode dti' is compatible with all other modes; that is, if one clock-interface is configured 'clock-mode dti' then the other clock-interface can have any clock-mode ... including 'dti'. Likewise, 'clock-mode bits-input 64k-input-only' is compatible with all other modes.), (Recommended Action: Do not attempt to configure RSP clock interfaces in mixed T1 and E1 modes. In this context, 'T1 mode' includes '6m-output-only' and 'E1 mode' includes '2m'. The simplest workaround to put your system in a consistent state where a not-mixed-T1-E1 configuration will be accepted is as follows: RP/0/RSP0/CPU0:ios# config RP/0/RSP0/CPU0:ios(config)# clock-interface sync 0 location 0/RSP0/CPUO RP/0/RSP0/CPU0:ios(config-clock-if)# port-parameters RP/0/RSP0/CPU0:ios(config-clk-freqsync)# clock-mode dti RP/0/RSP0/CPU0:ios(config-clk-freqsync)# commit RP/0/RSP0/CPU0:ios(config-clk-freqsync)# root RP/0/RSP0/CPU0:ios(config)# clock-interface sync 1 location 0/RSP0/CPUO RP/0/RSP0/CPU0:ios(config-clock-if)# port-parameters RP/0/RSP0/CPU0:ios(config-clk-freqsync)# clock-mode dti RP/0/RSP0/CPU0:ios(config-clk-freqsync)# commit RP/0/RSP0/CPU0:ios(config-clk-freqsync)# end With both ports in DTI mode, you will be able to change the configuration to fit your requirements.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-MPLS_REG_DROPPED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A MPLS registration operation request received when server is not initialized.), (Recommended Action: Controller and/or agent must ensure that MPLS registration operation requests are sent only when server is ready. If message is still seen after meeting these conditions, contact Cisco for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-ERR_SYSDB_ACCESS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified SysDB operation failed. Software will automatically do recovery by restarting the drp_paring process.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-FAILURE_MUTEX_INIT
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process exited due to failure in the Mutex initialisation at the specified API. The process will be respawned.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-2-FPD_EN_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The FPD process failed due to software unable to set FPD_EN bit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_FIB-3-INT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the SSE FIB to indicate that an internal error was seen when trying to check consistency of internal data structures.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTS1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-4-ASIC_TEMP_NOT_VALID
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_METRO-3-NULL_CONTEXT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Object context does not contain required parent/child context.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
preroute-6-INFO_MSG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is a Informational message in the preroute manager %s - indicates the informational message. %d - indicates any additiona data.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV6_EA-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An initialization error has occured for IPv6 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_BIND_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: APIV bind operation failed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LDA_AFP_LNK_FAULT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the transceiver port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do transceiver (SFP/XFP/CFP) OIR. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-3-MMAP
### Response:
(Severity: 3), (Category: OS), (Description: The mmap() failed in mmap_peer_local.), (Recommended Action: Copy the message exactly as it appears, and report it your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE2_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE2_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIO-7-ERR_EDM_INIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The EIO library was unable to register with sysdb as an EDM. The System should still continue to function as normal, with the exception that the 'show' commands for EIO will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-CONFIG_MISMATCH
### Response:
(Severity: 2), (Category: ROUTING), (Description: Max-prefix config with discard-extra-paths option AND soft-reconfig in config with always option both cannot be supported. One of them has to be unconfigured.), (Recommended Action: Remove either Max-prefix OR soft-reconfig in configuration)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-EVENT_MANAGER_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: Failed to create the event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE_GENERAL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-UNEXPECTED_ETHER_TAG
### Response:
(Severity: 3), (Category: L2), (Description: EVPN received Non-Zero Ethernet tag), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIAD-3-START_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCMCIAD failed to come up due to the specified reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture console log and 'show sysmgr trace: for possible cause)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_IO-3-PA_BIND
### Response:
(Severity: 3), (Category: IP), (Description: The ipv4_io process encountered a software error while connecting to the port arbitrator.), (Recommended Action: IPv4 IO could not register with the PA for handling a particular ICMP type locally. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-FAILURE2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: an external API has failed in Shelf Manager. The details are supplied with the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-PORT_CONTROL_REMOVE_CLIENT_SUCCESS
### Response:
(Severity: 5), (Category: L2), (Description: Port Access is blocked for the client.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-LOCK_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: A lock operation on shared resource, called by parser failed due to the mentioned error.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-APPS_IMAGE_SIZE_ERR
### Response:
(Severity: 5), (Category: L2), (Description: The size of the SPA Application image is too big.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SEND_PLATFORM_INFO_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The platform information sent to Service Engine failed to get processed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-CORRUPTED_HB_REQ_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The heart beat request message from the RSP has an invalid seq number in it. If this error persists, the card could be reset by the RSP.), (Recommended Action: If the issue results in any adverse system behavior please contact your Cisco technical support team after collecting the following information: 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CFG_MP_UPDATE_INCONSISTENCY
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to delete and/or create Maintenance Points on the specified interface and retrying the operation has not resolved the problem. This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some Maintenance Point deletes and/or creates have failed.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-6-MPA_CONFIG_SHUTDOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MPA reload is not possible when it is in config shutdown mode.), (Recommended Action: Apply no hw-module subslot <MPA> shutdown to power up MPA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-ROUTE_IMPORT_WARN
### Response:
(Severity: 4), (Category: IP), (Description: 'The LISP route import limit specified through the ' '<CmdBold>route-import maximum-prefix <limit>' '<noCmdBold> configuration has been reached.'), (Recommended Action: 'Use the <CmdBold>show lisp {ipv4 | ipv6} ' '[instance-id <iid>] route-import<noCmdBold> ' 'command to inspect the RIB routes that have been ' 'imported by LISP. Modify the LISP route import ' 'configuration to either import fewer routes or to ' 'increase the imported route limit.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-PROC_KILL_DISABLED
### Response:
(Severity: 6), (Category: HA), (Description: wdsysmon process-termination is disabled. A process which meets the kill criteria (either because it's in deadlock, or it's a memory or CPU hog - indicated by the first parameter [%d]) will not be terminated.), (Recommended Action: Collect all logs, especially those from wdsysmon. Also collect output from 'show watchdog trace'. Forward the messages to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TMPL-5-UNSUPPORTED
### Response:
(Severity: 5), (Category: SUBSCRIBER), (Description: Features configured under the dynamic template are not supported for this node, so this feature will not be applied for subscribers hosting on this will not have this feature configuration.), (Recommended Action: No Action is required, this ios message is informational, indicating the subscribers will not be having unsupported configuration)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-XCVR_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the pluggable tranceiver. Possible causes are not supported speed, autoneg.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-5-INIT_STDBY_PEER_UP_DOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: This is a notice saying that the MSDP Peer UP/DOWN on standby.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_TXM-7-NETIO_UNINIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-4-BOARD_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: disable S-16 P1, and S-8 P0 board vmon_shutdown intr due to board issue), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_CLEAR_UNKNOWN_PREFIX
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process received a clear event from RIB for a prefix which it was not tracking.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-RSP_MIXED_VER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Mix of different types of RSP is detected. Running the system in this condition is not allowed.), (Recommended Action: Please correct the condition by replacing the RSP with the same type. RSP type can be viewed via 'show platform' CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How have networking protocols evolved to meet the needs of modern converged networks?
### Response:
While early networks used a wide variety of protocols at different layers, modern networks have consolidated primarily around IPv4/IPv6 at layer 3 and Ethernet at layers 1-2. This enables a converged multi-service network infrastructure.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-6-CTRL_ETHER_LINK_EVENT
### Response:
(Severity: 6), (Category: DRIVER), (Description: card_mgr has detected link event for interface), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-3-EAP_ATTESTATION_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Canary stamp verification failed, peer is untrustworthy.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-HW_PROG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in FIB platform to indicate that engine layer identified an error while programming an object in h/w.), (Recommended Action: Please collect the console log, show tech-support cef platform. Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-PUBLISH_UPDATE
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error has occurred while indicating the occurence of the given update to nodes other than that local to the interface indicated. Packet diversion may now be inconsistent. The error string will give more detail on the type of error that has occurred.), (Recommended Action: For non-resource errors, removing and adding back the configuration that prompted the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-DEBUG_INIT_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Dumper used debugs, so that issues can be debugged.Debug init failed will disable this facility. This has no impact on the core file or functioning of dumper.), (Recommended Action: Does not impact core. Contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SELECTION_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: A new set of inputs has been selected at the specified selection point, to drive the output of the selection point.), (Recommended Action: This message is for information only, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-BADHRCHY
### Response:
(Severity: 4), (Category: MGBL), (Description: An invalid hierarchy was entered by the user.), (Recommended Action: Use the 'children' command to progressively find out the correct hierarchy string. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-ENQ_PKT_LOGIC_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Egress Queue Manager encountered a ENQ packet logic error. Possible cause for this error condition is a faulty hardware.), (Recommended Action: No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-3-PM_UNDER_PERSISTENT_FAULT
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The power module can not recover from persistent fault.), (Recommended Action: Please try manual AC/DC cycle to recover from the fault.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-PCIE_RESP_FIFO_MBE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-EXIT_DRVR
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver process is exiting due to the mentioned error condition.), (Recommended Action: Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_OPTICS_COMPLIANCE_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A compliance error was detected during optics module initialization. A compliance error is due to unsupported optics, checksum error, EEPROM CRC error, vendor data error, or decryption error. The optics is the pluggable optics on the line cards. optics initialization may happen when linecard boots up, optics OIR and line card process restart. The optics will not be enabled if an module compliance error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the optics with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_EA-3-INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Initialization of PBR EA PD DLL has failed due to one of the following reasons: 1) Failed to register with Ltrace. This would prevent process from logging trace messages. 2) Failed to register with debug. This would prevent process from logging debug messages. 3) Failed to initialize Shared Memory. This would prevent process from using shared memory for saving critical info. 4) Failed to initialize Feature EA DLL API needed for programming of hardware resources. 5) Failed to initialize callback function from Feature EA DLL for compiling IPv4/IPv6 TCAM entries needed for Policy programming in hardeare. 6) Failed to initialize feature checkpoint info. This is needed for checkpointing IPv4 and IPv6 Policy programmed in hardware. 7) Failed to initialize TLU connection. This would prevent process from using TLU resources for storing IPv6 Redirect Nexthop. 8) Failed to initialize MIPC connection. This would prevent process from flushing policer entries from RSM to HW. 9) Failed to initialize QoSRM DLL. This would prevent process from allocating a Policer for a Class.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_IO-6-ERR_GENERAL
### Response:
(Severity: 6), (Category: ROUTING), (Description: Some informational message with cerrno.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-CDMA_REQ_ERROR
### Response:
(Severity: 4), (Category: FABRIC), (Description: CpuCtrl driver was not able to complete the CDMA request for the above specified address location. This may be caused if the device is not initialized correctly or synchronized correctly.), (Recommended Action: If it is possible to isolate the trigger point for the cdma failure, collect all the necessary condition that caused the error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-LOCKORDER_UPGRADE
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code. An invalid upgrade was made of a lock.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-2-MAX_BPORT_REACH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: DPA failed to install entry because of Max Bridgeport limit.), (Recommended Action: Please collect the console log, DPA traces (show dpa trace loc <>), The failure could be because we are exceeding limit for max bports in VRRP. Report to your technical support representative for further details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED_LIB-3-LRD_GET_DLRSC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A placed client API failed in the call to lrd to get the dlrsc nodeid), (Recommended Action: Collect the function name and traceback information in addition to below show commands and forward to your next level of technical support. show commands: show tech lrd, show redundancy trace, show tech sysmgr, show tech placed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-MSG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Received unexpected message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.=)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-2-AUTO_FPD_RELOAD
### Response:
(Severity: 2), (Category: PLATFORM), (Description: These messages indicate that FPD auto-upgrade is successful and the LC is to be reloaded shortly, as some FPDs require reload to get the latest FPD version activated.), (Recommended Action: No action is needed from the user. This is to inform the user about the LC reload initiated after FPD auto-upgrade.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-NO_SOCKETS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No sockets), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOSLIB-4-DLCLOSE
### Response:
(Severity: 4), (Category: QOS), (Description: This message is seen when the process fails to close the DLL 'libqos_ea_ui_supp.dll'. It may fail to close the DLL due to any one of the following reasons: 1. Due invalid handle passed to the function. 2. DLL may have been already closed.), (Recommended Action: Please get the information specified under the component required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: L2RIB couldn't allocate memory.), (Recommended Action: Check memory utilization on the card the error came for and take appropriate steps to reduce it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_CORE_ISOLATION
### Response:
(Severity: 5), (Category: L2), (Description: Core network connectivity status for the ICCP Group has changed, affecting the bundle. If the bundle is isolated then it cannot be active for MC-LAG.), (Recommended Action: Ensure that the backbone interface is able to carry traffic to the core.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB_IFSPECIFIC_CLIENT-3-ERR_OPER_TABLE
### Response:
(Severity: 3), (Category: SNMP), (Description: 'A software problem has been detected that prevents SNMP from ' 'completing the requested interface specific table operation. ' 'Operation of the interface specific MIB (e.g. SONET, Ethernet) is ' 'impacted.'), (Recommended Action: 'If this message is encountered, copy the System Message exactly as ' 'it appears on the console or in the system log, contact your Cisco ' 'technical support representative, and provide the representative with ' 'the information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_PORT_3_SENDING_AIS
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in T1, J1 and E1 modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-MUTEX_INIT_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The packet subsystem failed to initialize the packet mutex.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEV_EUSB1_NOT_AVAILABLE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EUSB1 device not available), (Recommended Action: Please attempt the following: If dual RSP, and the problem is on the active RSP, issue 'redundancy switchover' If the problem is on the standby/simplex RSP: Restart low level usb driver via ksh, 'kill io-usb_pid' Failing which, Restart usbstack 'process restart umass-enum' Failing which, Reload RSP If problem persistes, replace EUSB devices If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-OPTICS_FPGA_SERDES_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Rx serdes fault detected/cleared on port), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-EMPTY_BIT_NOT_CLEARED_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: I2C operation failed because the EMPTY bit is still set after multiple retries. I2C server process will automatically restart to recover from this error condition.), (Recommended Action: This error should recover automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-2-LOG_EMERG
### Response:
(Severity: 2), (Category: INFRA), (Description: please see show kim log for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_6_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_ENCAP_DB-2-TUN_NOTVALID_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: TUNNEL not inserted in AVL tree. valid flag not set), (Recommended Action: The following needs to be collected and DE team to be contacted. show encap-id platform egress-db all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-3-PIO_INVALID_PARAM
### Response:
(Severity: 3), (Category: L2), (Description: An error occured because acc_stride was greater than acc_size), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-3-ERR_ASIC_MBE
### Response:
(Severity: 3), (Category: FABRIC), (Description: CCSQ encountered a multiple bit error in the mentioned block. This error is an uncorrectable error. Driver takes appropriate action to log and fix the error which may include a device reset.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_MA-3-INTF_CREATE_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The VASI Manager has failed to create an interface. This can happen primarily due to low memory condition in the system or in some cases due to an internal error.), (Recommended Action: Check the output of show mem summary and look for ways to free up memory and restart the vasimgr process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of Secure Shell (SSH) and how is it configured in Cisco IOS XR?
### Response:
Secure Shell (SSH) is used to provide secure and encrypted remote access to the router for management purposes. SSH is configured by generating a key pair, specifying the SSH version, setting the timeout and maximum authentication tries, and configuring VTY lines to use SSH as the transport protocol.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ce_iso-2-FAULTCE_DISABLEPORT28_43
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fault detected while disabling the port because of the failure of disabling functionality. Isolating RP node from the CE network is failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-MIXED_MEMORY_POWERED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Target node is brought up because it is up previously. System operating in mixed line card memory mode, which is only supported temporily during line card upgrade or downgrade.), (Recommended Action: Correct the situation by using line cards with same memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-THREAD_COND_WAIT_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper waits for a condition based on which it triggers the core dump process. Here a thread failed to wait on a conditional variable. It will impact the functioning of dumper process.), (Recommended Action: If this happens while dumping the core, please verify if the core dump is successful or not. Please collect the following data and contact the support. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-NOTIF_Q_FULL
### Response:
(Severity: 3), (Category: OS), (Description: Too many notifications have been sent to the component. The queue to hold the notification has overflowed. System will recover by itself. When this issue happens, it will trigger an automatic restart of pifibm_server_lc process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-LABEL_RECLAIM_FAIL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-NSR_READY_STATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The listed state refers to the state of NSR, which is either 'ready' \ or 'not ready'.), (Recommended Action: None. This is a solicited message (by \ 'logging events sync-updates' . User may verify the NSR sync \ status as shown in the output of \ 'show mpls traffic-eng nsr status detail'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_1_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-HBLOSS_SCRIPT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The execution of the heartbeat loss log collection script has failed, and the error code is indicated in the error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-3-ENCODING_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: This may be a program level error.), (Recommended Action: Try to rerun the CLI , if it fails again please contact support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MANSDORF-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A initialization failure occurred in MANSDORF layer. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed in init lteace. This condition indicates a problem with the software when ltrace init failed.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show logging show running-config show cli history detail loc <> sh plim services trace driver info sh plim services trace driver error </RP> <LC> </LC> <TECH> show tech-support location <> show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-HEALTH_MONITOR_ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: NPU driver health monitor detected error conditions), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR node protection desired feature?
### Response:
The MPLS TE FRR node protection desired feature allows a TE tunnel to be configured for node protection, but if node protection is not possible, link protection is attempted instead. This provides a best-effort approach to protecting traffic, preferring node protection but using link protection as a fallback. It increases the chances of successful FRR protection.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-3-ERR_MAX_MAC
### Response:
(Severity: 3), (Category: IP), (Description: More than the maximum supported number of MAC address filters has been installed for this interface meaning traffic to some virtual router IP addresses will be dropped. Note that for sub-interfaces the limit is per parent interface.), (Recommended Action: Reduce the number of virtual routers on this interface (or the parent if it is a sub-interface))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-DSP_RECOVERY_NOT_POSSIBLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: One or more interfaces are still UP due to which DSP (Denali) recovery cannot be attempted.), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-PAUSED_BEFORE_RELOAD
### Response:
(Severity: 6), (Category: INSTALL), (Description: When initiating the operation, the user specified that the install infrastructure should pause before doing any reloads. The operation will not continue until the user indicates that it is safe to do so using the supplied command.), (Recommended Action: Either follow the command given, or attach to the operation synchronously for further details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-IPV4_ROUTES_TOO_MANY
### Response:
(Severity: 4), (Category: SECURITY), (Description: Spoke sent too many IPV4 routes during negotiation.), (Recommended Action: 'configure spoke with less routes')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the IOS XR System Database (SysDB)?
### Response:
SysDB is a centralized in-memory database that provides a consistent view of system state and configuration. It is used by IOS XR processes to store and retrieve config and operational data. SysDB supports high availability by replicating data between nodes. It provides a schema-driven API for processes to access the data.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-MIXED_MEMORY_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: System enters/exits mixed line card memory mode, as a result of powering up or removing a line card of different memory configuration.), (Recommended Action: Correct the situation by using line cards with same memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-RCVD_NOTIF_BADHOLDTIME
### Response:
(Severity: 5), (Category: ROUTING), (Description: A BGP notification message of unacceptable hold time has been received.), (Recommended Action: This message is info only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-LISP_RLOC_TBL
### Response:
(Severity: 3), (Category: ROUTING), (Description: This reflects a failure in the maintenance of the lisp rloc table used to control lisp decapsulation in the specified VRF.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-NOMEMORY
### Response:
(Severity: 3), (Category: MGBL), (Description: An operation could not be accomplished because of a low-memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-COLLECTING_DEBUGS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error condition was hit causing shelfmgr to collect some debug info via a script.), (Recommended Action: If this error persists, please collect the file shown in the message and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-SYSDB_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred when the ANCP process tried to perform initialization with the system database process/routines. The error could be because sysdb process is unavailable at the time of ANCP initialization or a software error in either of ANCP or sysdb processes.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and if ANCP process is able to initialize and come up successfully after restart, then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_3_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-3-THREAD_START_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error occurred in bcm_process which involves exiting the process. After the bcm_process restarts, the error will be cleared.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-6-QDR_BIST_FAILURE
### Response:
(Severity: 6), (Category: L2), (Description: Egress Queue Manager encountered a QDR BIST failure error. Possible cause for this error condition is a faulty hardware.), (Recommended Action: No action is required. Process will be automatically restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in DMAC process. Typically, this is an internal error. Sometimes, it will result in a RSP card reboot. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers dmac device <interface> detail location <loc in msg><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers dmac device <interface> detail location <loc in msg><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_MSG_ENCODE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: API Version message encoding failed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-MEM_SIZE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to acquire the size of a block of memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-6-TRIGGER_SO
### Response:
(Severity: 6), (Category: ROUTING), (Description: If NSR switch-over is configured, active bgp will trigger the switch over in case of TCP failure or BGP failure, if NSR is ready and an install operation is not in progress.), (Recommended Action: This message is for information purpose only. Analysis should be done if switch-over is not expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-3-HEALTH_MONITOR_ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: PSE driver health monitor detected error conditions), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect the error message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_1_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you deactivate a software package in Cisco IOS XR?
### Response:
A software package can be deactivated in Cisco IOS XR using the 'install deactivate' command, which disables the package's features on the router without removing the package.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-MMAP_IMDR_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: mmap of the shared memory required to store servers tree nodes failed during IMDR.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture 'show shmwin summary', 'show shmwin trace server', and 'show shmwin trace all'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-6-AGE_TIMER_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MAC aging time is set to this new value, which is highest among all bridge-domains.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-6-NO_BUF_TO_REPLACE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPUCTRL RX PDMA ring could not replace the buffers. possible low buffer condition.), (Recommended Action: Check for packet memory particle allocation and usage with 'show packet-memory', 'show packet-memory inuse' and 'show packet-memory old'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_NEXTHOP_UNREGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to unregister a next-hop resolution event. Future state change events on the next-hop may cause further messages to be generated by the static process.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-NSF_CREATE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: TBD.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_TNC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from TNC.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-ENFORCE_OOC
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is enabled without appropriate licenses.), (Recommended Action: The customer should either purchase more licenses or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-MUTEX_UNLOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver has been unable to unlock access to the UART.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_ITEMGET_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering performance counter with stats infra failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the BGP process manager. If this occurred during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_1_XAUI_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error - 1 from XAUI on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-CLIENT_INIT_DEBUG_FAILED
### Response:
(Severity: 5), (Category: OS), (Description: 'Debug utility registration failed.' 'Debug functionality may not work properly.' 'IMDR will proceed without fail.'), (Recommended Action: 'Restarting the process may resolve the issue.' 'If the problem persists after some tries, contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-6-CONTACT
### Response:
(Severity: 6), (Category: L2), (Description: Debug messages for APS.), (Recommended Action: No Action requirements.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-POLICY_ITEM_UNSUPPORTED
### Response:
(Severity: 7), (Category: ROUTING), (Description: The policy_repository process was not able to extract the the item for this type. Please add support to the policy_repository or remove support from the protocols.), (Recommended Action: This indicates and internal inconsistency between the policy_repository and the protocols. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-OPEN
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to open() failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA-3-MGII_MUTEX
### Response:
(Severity: 3), (Category: IP), (Description: Failure of thread operations on the mutex protecting the multicast group memberships.), (Recommended Action: Do the following action.Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-LOW_TEMP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low temperature. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-2-INTERNAL_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Internal error. Type of error and reason will be there in the msg %s - ifhandle/ name of errored interface %s - Type of the error occured %s - Reason for the error This happens on the LC with ATM interfaces), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Most of the errors are because of low memory. Others are not very critical. LC reload will resolve the low memory condition. Information to be collected before the reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NACMD-7-INIT_FAIL
### Response:
(Severity: 7), (Category: SECURITY), (Description: Error encountered while using the System Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-OBFL_CACHE_OVERFLOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received UART message.), (Recommended Action: restart canb-server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN_POLICY-3-ORA_INSTBUILD
### Response:
(Severity: 3), (Category: L2), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error verbose<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error verbose<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-TUPLE_LOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-LDP_CTX_INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: During LDP [vrf] context creation, the initialization of some of the module has failed. This is a severe condition and results in LDP to go non-operational state for given VRF (or default VRF).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. A user can also try restarting 'mpls_ldp' process (after collecting required info) to fix this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-CHAN_CONNECT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message indicates that there is a failure to connect lwm server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-MAC_ACC_STATS_REGISTRATION
### Response:
(Severity: 3), (Category: L2), (Description: It was not possible to register for statistics collection due to a error reported by the statistics infrastructure.), (Recommended Action: If the error is reported again then reloading the linecard may allow it to recover, but it will impact all traffic on that node. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICLIB-4-NO_APP_MEDIA
### Response:
(Severity: 4), (Category: LICENSE), (Description: The disk utilities library did not return a device name to license manager where the persistent license data files can be stored. License information will be stored in a temporary location, and will be lost if the router reloads. Implicit licenses will be available. Permanent or evaluation licenses should not be installed in this state, as they will be lost if the router reloads and will need to be regenerated before they can be installed again.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-5-CCM_ERROR_COUNTER_WRAPPED
### Response:
(Severity: 5), (Category: L2), (Description: The CCM error counters displayed in 'show ethernet cfm peer meps' are only able to store a value of up to 4294967295. One or more of the error counters have gone over this limit and the counter has wrapped around to zero.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify disk synchronization for disk mirroring?
### Response:
To verify disk synchronization for disk mirroring, ensuring data integrity, use the 'mirror verify' command in EXEC or administration EXEC mode. RP/0/RSP0/CPU0:router#mirror verify
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-6-INFO_REDIRECTS_DISABLED
### Response:
(Severity: 6), (Category: IP), (Description: Disabling HSRP filtered ICMP redirects when ICMP redirects are enabled may cause hosts to use real IP addresses as their default routes, and first hop redundancy may be lost.), (Recommended Action: Ensure that ICMP redirects are disabled on this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_NOSPACE
### Response:
(Severity: 3), (Category: MGBL), (Description: Note that while a command like df may show free space, rsync creates tmp files during the transfer which may rapidly fill up that free space.), (Recommended Action: Move large files to another directory/filesystem which has more space, and/or clean up junk files you no longer need)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALIDVERSION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The version of this file is too old or wrong'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-UPGRADE_PROV_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot do FPD upgrade when Provisioning is in progress. Upgrade to be initiated again after provisioning), (Recommended Action: Issue FPD upgrade command again once provisioning is completed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-4-SET_THREAD_PRIORITY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unable to set the heartbeat pulse of this node to high priority. Proceeding with default priority, however in a high CPU consumption, this node's heartbeat pulse may get lost, causing this node to get reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-5-PLL_T0_STATE_FREERUN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the T0 PLL output is free-running.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-FABRIC_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_NETIO-4-PAK_DROP
### Response:
(Severity: 4), (Category: L2), (Description: The PPP NetIO DLL has been forced to drop a packet because of an unexpected error. The error message describes the reason for the drop.), (Recommended Action: The system may recover by itself. If it doesn't then the error message will recur. In this case consider restarting the NetIO process on the affected linecard. If the error messages continue after restarting NetIO then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_ERROR-3-CHKPT_TRAN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Version upgrade from one version to another failed. Traffic loss is expected till database is rebuilt.), (Recommended Action: Wait for the database to rebuild.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-ERR_UPDATE_COMPLETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv6_rib_update_complete.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_BILLING-5-PATHSTATUS
### Response:
(Severity: 5), (Category: SERVICES), (Description: The SBC billing cache path mount point status has changed and is being reported to the user for an easier access to the SBC billing records.), (Recommended Action: Take note of the paths used by SBC billing to access the SBC billing records)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_MODULATOR_BIAS
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_BEFORE_TRACE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error initializing its Debug and Trace The error message describes what operation has failed and why it failed. This is a fatal error and the PPPoE MA process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BOOTVAR-4-CERR_REGISTER_DLL
### Response:
(Severity: 4), (Category: INSTALL), (Description: The error services failed to register the errors of the specified DLL. The system will continue to operate, but error or warning messages displayed to the customer may not be complete.), (Recommended Action: This only impacts ltrace message logging and has no impact on the functionality of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Encounter problem during process initialization. '%s' contains the explanation of the problem. %s - error description %d - error code %s - error code description), (Recommended Action: Restart the fabio_svr process. Contact TAC if problem still exist)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-EVENT_ATTACH
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to attach nvgen requst handler to event manager failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP interface priority?
### Response:
To configure RSVP interface priority, use the 'mpls traffic-eng priority' command in interface configuration mode. RP/0/RSP0/CPU0:router(config-if)#mpls traffic-eng priority 3 3
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-LAYER_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Check of HW layer failed. You are trying to create/edit logical switch, but it is already registered in sysdb and its layer value (layer2 or layer3) is diffent than requested one. *SUPPORT*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-DEFAULT_ROUTE_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A route update was skipped because of an internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_MPLS_EA-3-COMMUNICATION_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication error has occurred in the MPLS Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-ERR_MUTEX_LOCK
### Response:
(Severity: 3), (Category: L2), (Description: Locking the mutex governing the access to MFR MA IDB database failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SYNC-3-SYNC_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Error in syncing the given XR configuration to Linux), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_LOOKUP
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected lookup error occured when trying to lookup a prefix.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-BAG_ENCODE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to encode a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-3-UPDATE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The update operation for the specified FPD image has failed.), (Recommended Action: Retry the operation to update the image. If the retry operation fails, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the <CmdBold>show logging<noCmdBold> and <CmdBold>show tech-support<noCmdBold> commands and your pertinent troubleshooting logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-ASIC_ERROR_DIGI_CPAK
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-SNMP_IDX_REL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while releasing an SNMP index. This may be due to an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPG-7-FAST_BAG_DECODE_FN_CREATION_FAILURE
### Response:
(Severity: 7), (Category: MGBL), (Description: Failed to create a fast bag decoder. The generic decoder will be used instead.), (Recommended Action: No action is required. This is an internal message used to track and improve efficiency of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_INT_PWR_SUPPLY_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-6-UPGRADE_COMPLETED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that Canbus Controller firmware upgrade is completed on the specified location.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_DRV-3-ERR_PHY_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in platform component,due to platform_get_reserved_physmem function invocation failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-5-BAD_PKT_RCV
### Response:
(Severity: 5), (Category: IP), (Description: A packet was received from the network which was not properly formatted. As a result, the packet was discarded. If the packet was destined to an existing neighbor connection, the connection remains intact unless the dead timer to our peer expires.), (Recommended Action: First, determine if the problem is persistent. If it is, perhaps the router is communicating with a non-conforming or mis-behaving ANCP client. ANCP's detail summary statistics will show the number of occurrences and what was invalid in the packet. If the packet was received on an existing adjacency, the drop statistics will reveal which adjacency the drop occurred on. Details error logs can also be found in ancp neighbor trace. If the device is identified, restart or remove it from the network. If a device is not identified, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_0_PKT_MINLEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-DSP_HW_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DSP hardware failure reported), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-2-ASIC_ERROR_THRESHOLD_CARD_SHUTDOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Uncorrectable asic errors occured on card), (Recommended Action: ASIC errors that are uncorrectable have occured and exceed the threshold. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-PROC_RUNNING
### Response:
(Severity: 7), (Category: HA), (Description: A request to move or copy checkpoint data from one node to another has failed because an instance of the process is running on the destination node.), (Recommended Action: Determine why the process is running on the destination node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LDA_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver version is not compatible with the hardware version.), (Recommended Action: Upgrade the FPGA/CPLD image for the device using the FPD procedure, followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-RULES_DUPLICATE_FEATURE_STR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The ma-feature or ea-feature property was set twice within a rule. This property may have been set implicitly by the feature or owner-string properties. feature and owner-string are synonyms which set both the ma-feature and ea-feature properties. Please check the rules file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-PTHREAD_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemon was unable to create the thread. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CCB_NODEID_CREATION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager failed to create a nodeid based on the supplied rack, slot, and instance.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOL_MAPPERD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMA-3-UNSUPPORTED_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A request was made for information on a feature that is unsupported on the device specified in the request. This error may affect the usability of the device if the feature is necessary for proper operation.), (Recommended Action: Check to see if the device on which the feature has failed is performing correctly for all necessary functionality.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-GST_JUMP_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: GST jump error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ORA_RUN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-FPGA_PCI_FATAL_AER
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-PEC_SWITCHCLOSED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The inserted expansion card screwed in complete.), (Recommended Action: PEC card is screwed in. Enough power should be available for Power On.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-1-ALL_FABRIC_RACKS_LOST
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This node has lost connectivity with all fabric racks before the fabric planes came up. This could be a control ethernet problem or the fabrics have reloaded.), (Recommended Action: Check if fabric chassis are up. If up, check control-ethernet connectivity between this chassis and Fabric chassis. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-FINT_MEDIA_REG_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: LPTS media registration with FINT failed), (Recommended Action: Try restarting the netio process. This could sometimes help fix the problem as the set mapping will be trigged again and we might not hit the failure the 2nd time.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-RESET_SELF
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The node on which reddrv is running, resets itself on loss of heartbeat from the RP.), (Recommended Action: Check the RP in the system. If present, check the connectivity between RP and the node that went down.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_SYSDB_BIND
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq Sysdb Bind error. The driver should retry by itself.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-3-TLV_DECODE
### Response:
(Severity: 3), (Category: IP), (Description: This is an internal error. It indicates that an address information structure couldn't be decoded correctly. This could leave the affected process in an inconsistent state.), (Recommended Action: Get the output of show tech-support, show arm [ipv4/ipv6] trace, running coredump of the process. Unconfiguring, reconfiguring the interface may help in recovering the from error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-UNABLE_TO_START_UMASS_DISK_MONITOR_THREAD
### Response:
(Severity: 5), (Category: PLATFORM), (Description: platform umass check disk interface called by enum-umass code to allow PD to check on mandatory devices and take platform specific action if missing.Start disk space monitoring for nodes which need. This notice message will get printed when it unable to start umass disk monitor thread.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_INTF_INJ_CAP_DLL-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The ltrace file could not be created.), (Recommended Action: Please contact TAC Support Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN service instance on an interface?
### Response:
To configure an L2VPN service instance on an interface, use the 'service instance' command within the interface configuration mode. interface GigabitEthernet0/0/0
service instance 100 ethernet
encapsulation dot1q 100
xconnect 10.1.1.2 100 encapsulation mpls
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REPLACE_COMMIT_PENDING
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that the entire system will be reloaded as part of the specified install operation and install commit will be triggered post reload.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-TRANSCEIVER_LOC
### Response:
(Severity: 2), (Category: L2), (Description: The Transceiver location is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA - Enabling power for LC), (Recommended Action: No actions are required as this is just an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-INVALID_SYMLINKS_FILE
### Response:
(Severity: 3), (Category: OS), (Description: A startup configuration file for QSM contained an invalid line. This could be due to a problem with the installed media or file system damage. QSM will continue startup-up, but some system functionality may be impared.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-PURGE_TIMER_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Couldn't allocate a purge timer. Old routes for this protocol may not automatically get purge from the FIB table.), (Recommended Action: Free up some resources and restart the RIB. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-4-TERM_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The software forwarding support for IEEE802.1Q VLANs was unable to clean up. Forwarding should not be affected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-ASIC_FATAL_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter ASIC hit fatal fault. Card would be reloaded.), (Recommended Action: Fabric arbiter asic hit fatal fault. The card would get reloaded. If the error message persists after reload contact TAC. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the instdir-cli process in IOS XR installation?
### Response:
The instdir-cli process provides the user interface for performing installation-related tasks. It allows the user to execute install commands from the CLI.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-DEFAULT_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred on a request to have the RIB send us route updates for the default route.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_28
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-4-ERR_PKT_HANDLER
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured whilst handling a packet event.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of BGP route dampening?
### Response:
Route dampening minimizes the propagation of flapping routes across an internetwork. Criteria can be defined to identify poorly behaved routes which are suppressed. Dampening parameters include a penalty value, a suppression limit, a reuse limit, and a maximum suppress time.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: information message %s - message), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-ERR_THREAD_FN
### Response:
(Severity: 3), (Category: SECURITY), (Description: The call to pthread functions, such as pthread_create, lock/unlock a mutex or wait on a condition, failed. The error is displayed in the message.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-UNBIND_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Event manager Connection closure failed.' 'This will not effect the process.' 'This operation is optional'), (Recommended Action: 'ISSU manager will use some other API' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-AIB_SHM_OPEN_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'while creating Shared memory to store AIB entries during initialization.' 'shm open failed.Process will exit with failure'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN-3-INVALID_LOGIN_DEBUG_FLAG
### Response:
(Severity: 3), (Category: SECURITY), (Description: The debug flag specified is not supported.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-PLR_CONFIG_OUT_OF_SYNC
### Response:
(Severity: 3), (Category: LICENSE), (Description: Smart Licensing Configuration does not match the value of the PLR enable flag in Trusted Store. This can happen if a configuration is copied onto the system and a reload occurs. If the new configuration does not contain the Smart Licensing Enable command, the value in Trusted Store will not match.), (Recommended Action: Apply the desired Smart Licensing PLR Configuration Command and persist the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-SVR_MEMINFO
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to communicate with wdsysmon to retrieve a node's memory information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP AS override feature?
### Response:
The BGP AS override feature allows a router to override the AS number of a site with its own AS number when sending updates. This is commonly used when a customer is multi-homed to the same provider to avoid the provider's AS appearing in the AS path. It is enabled with the neighbor as-override command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_ALARM-3-MAC_LEARN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The maximum number of MAC addresses have been learned to a physical limit), (Recommended Action: Reduce number of MAC addresses, or reduce age-out time of stale MACs)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-6-FIRMWARE_MAX_PEMS_IN_UPGRADE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'Firmware upgrade proceeding with multiple power supplies'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_SDFEC_LOM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_SOCK-4-ERR_PAKMAN
### Response:
(Severity: 4), (Category: L2), (Description: An unknown error occurred after a pakman disconnect event. Restarting the socket process should have resolved the problem.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-4-DUAL_HEAD_CONFLICT
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: It has been detected that the configuration applied on the active and standby hosts is not consistent on the Satellite.), (Recommended Action: Run 'show nv satellite <sat_id> dual-head conflict' to display the conflicting configuration. <sat_id> should be in the range 100-65534 and is specified in the message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BPE Driver encountered a fatal error and is not able to recover. The supplied text string will explain the reason. Call support with this text.), (Recommended Action: Please attempt to correct the error by restarting the process by issuing the command in exec mode If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-0-SOFT_ERROR_RELOAD_RECOVERY_0
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 0. Card will be reloaded to cover from this error.), (Recommended Action: Soft error are very rare due to Cosmic and other environmental factors. The probability of soft error on same device again is extremely low. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-LCFG_DELETE
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error has occurred while removing the diversion implemented for the given interface. The error string will give more detail on the type of error that has occurred.), (Recommended Action: For non-resource errors, adding and removing a service attachment for the interface indicated in the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-TM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The asic traffic manager initialization failed due to the above mentioned error.), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. 'show process npu_drvr location <loc>' 2. Collect the Broadcom ltraces: pkg/bin/npu_show_ltrace -S If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPDRIVER-3-SERDES_DMEM_MULTIPLE_BIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that during initialization the SERDES SPICO for the indicated ring, NP and serdes instance had uncorrectable bit errors in data memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-FAIL_EDM_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Inventory Manager is not able to create a EDM connection with the event manager to populate the inventory details in to the SYSDB database. As a reason it is not able to resgiter for notification/verification from SYSDB.), (Recommended Action: No action needed. Inventory Manager process will restart automatically)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-LC_EOBC_FAILED_RSP1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This line card has lost EOBC heartbeat to RSP1.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_THREAD_ATTRIBUTE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while setting the thread attribute during the process initialization sequence. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_MEM_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an input memory error on link 4), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-OP_SFP_WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The particular operation mentioned in the message occured due to some reason. This may be a serious failure, however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Collect the outputs for the following CLI : show inventory show diag show controller the various causes for the message are : -Unable to get XFP/CFP/QSFP Vendor name -Unable to get XFP/CFP/QSFP Vendor serial number -Unable to check XFP/CFP/QSFP compliance -Unable to check XFP/CFP/QSFP supported -Unable to get SFP/XFP/QSFP data Action needs to be taken accordingly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_UNEXPECTED_CB
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA received an asynchronous callback from another process when the session was in an incorrect state. The error message describes which callback was received. This is most likely to be a programming error, either in PPPoE or in one of the processes it interacts with.), (Recommended Action: PPPoE MA should recover by itself.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_rio_netio-3-INIT_DEBUG
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of debug for the service ingress diversion NetIO DLL. If this occurred during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded,and an error will be returned to the user.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_HEARTBEAT_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected a problem in the internal state machine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTREPL-7-FILE_OPEN_FAILED
### Response:
(Severity: 7), (Category: INSTALL), (Description: A file could not be opened from this node when as a file stream was being constructed.), (Recommended Action: Run 'install verify packages repair' on RP and DRP nodes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-SCHEDPARAM_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver was unable to set the parameters of the interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-FILE
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP ENA filesystem handler was unable to carry out an operation on an internal file. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_UNDEFINED_POLICER
### Response:
(Severity: 3), (Category: OS), (Description: An input flow definition references an undefined policer. The flow will be configured to use policer 0.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_RESUMED
### Response:
(Severity: 6), (Category: INSTALL), (Description: The install operation has been resumed after pausing for user input.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-BDXC_CERR
### Response:
(Severity: 3), (Category: L2), (Description: This L2FIB error has occurred due to errors in BDXC (Bridge Domain Cross-connect) operations.), (Recommended Action: Check the MMRP/IGMP client status to ensure it is working correctly. If not restart the process using: process restart l2fib_mgr Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-TMC_CLUSTER_PARITY
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-VCPU_INVALID
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting invalid VCPU value.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-5-SELFMANAGE_CALLBACK_FAILED
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: NetIO gets restarted if a NetIO DLL fails to process an install event. This should not cause any problems to the router and NetIO should come back up fine after restart.), (Recommended Action: This should not cause any problems in the router, NetIO should restart and come back up fine & resume its normal functionality. If it causes any routing issues such as adjacency going down or some other problem, one potential cause is that NetIO took longer to restart. NetIO restart time is a function of number of interfaces configured in NetIO on this node. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-BAD_LWM_MSG
### Response:
(Severity: 7), (Category: OS), (Description: An error was received while processing a request from a local process. There could be a version mis-match or corruption in the client process. The error message should provide some clue to the problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink-3-ML_GROUP_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: The link addition/removal from a Multilink bundle has failed due to a software error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_RSI
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected RSI error occured during a table creation/deletion/modification operation.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-SCRIPT_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A problem was encountered while trying to spawn a script.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-NEED_SLOW_ROUTINE
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 base header in the packet could not be directly accessed in the named routine, and hence the packet was dropped. This is due to the packet not being within the first particle or the header not being completly contained within one particle. If the slow switching routines (using pak_netio_ API calls) had been compiled in then the packet could have been switched.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDS_LIB-4-INTERNALERR
### Response:
(Severity: 4), (Category: INSTALL), (Description: An internal software error occurred while getting the SDS node id.), (Recommended Action: This internal error will be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-IDP_INTENT_FILE_ERROR
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'The Intent Distribution Protocol Module, ' 'encountered file error when reading from intent file, ' 'check the file name and its contents'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-6-UNKNOWN_PACKET_OFFSET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Unknown packet offset passed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-6-UPGRADE_IN_PROGRESS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that Canbus Controller firmware upgrade is in progress on the specified location. The page that is being presently upgraded is mentioned in the message. This page number would be in the specified range, corresponding to the Canbus Controller partition that is being upgraded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_MA-7-INIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_SPP-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HFR SPP Memory Allocation Error message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn spp process, up to a fixed number of times the error is encountered, to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_EVC_CREATE
### Response:
(Severity: 4), (Category: L2), (Description: SSRP failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_SSTAR-3-ERR_INTERRUPT_THREAD_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl (sstar) driver detected a critical failure in the interrupt thread initialization. Abort and exit the thread.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-NODE_OIRED
### Response:
(Severity: 6), (Category: FABRIC), (Description: In interrupt detecting OIR of the fabric card was received. Driver will exit. If the message is seen at steady state with no OIR action then support should be requested. In case the card was physically OIRed this message may be seen and is not an issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV6_EA-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and been handled.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_1
### Response:
(Severity: 3), (Category: IP), (Description: The received PBU matches an existing binding that is currently being revoked. Hence this PBU will not be accepted.), (Recommended Action: No action is required. Most likely the binding will be retried from the MAG.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-WRITE_CTX_INVALID
### Response:
(Severity: 7), (Category: LIBRARY), (Description: Consumer could not process write from producer. It could be because of invalid/unexisting context. This commonly occurs during issu.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-NT_SWO_PCIE_SWITCH_EEP_UPGRADE_REQD
### Response:
(Severity: 3), (Category: INFRA), (Description: The PCIe Switch on the Switch Card does not have the right EEPROM version required, without which the PCIe switch is not correctly setup when the switch card is powered on. This will impact the ability provide Switch redundancy during Shelf Controller card Failover.), (Recommended Action: Upgrade the PCIe Switch EEPROM on the Switch card as soon possible and power cycle the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-PLATFORM_ERROR_RESTART_REQUIRED
### Response:
(Severity: 3), (Category: OS), (Description: The Linux Packet classifier hit a fatal error while attempting to register with the platform code. SPP will restart to recover. While the process is restarting all packets processed in software will be dropped, but hardware forwarding will not be affected.), (Recommended Action: If the message is not seen again then the restart resolved the problem and no further action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-5-SINGLE_FEED_NO_EFFECT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: 'Warning message that single feed mode was configured on a V1 or V2 AC power modules chassis, the configuration has no effect'), (Recommended Action: Informational, no action needs to be taken)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-GENCOMMERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A Inter Process Communication error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_EA-3-UNABLE_TO_RECONNECT
### Response:
(Severity: 3), (Category: SERVICES), (Description: If the Service Infrastructure becomes out of sync with IM, then it reconnects in order to prompt a resync. If this message is displayed then it has been able to reconnect. This may cause configured interfaces to no longer forward traffic, or interfaces which have been shut down or deleted to continue to do so.), (Recommended Action: Restarting the process that displayed the message may solve the issue, or restarting ifmgr. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-0-RP_RELOAD_REQUIRED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-ERR_INTERNAL_SW
### Response:
(Severity: 3), (Category: FABRIC), (Description: The 400G fabric POD DLL encountered the annunciated internal SW error. It likely affects the operation of the fabric POD and the fabric subsystem on the multi-chassis.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOMAHAWK-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Tomahawk RP CPU Subsystem error reports), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-ERR_MISSING_SERIAL_NUMBER
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: Mandatory information serial number is missing.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-6-PLANE_GROUP_UNREACHABLE
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message gives additional information related to a plane in multicast-down state. It reports that a group of fabric addresses have become unreachable. For CRS-1 16-slot chassis, group 0 is the upper shelf containing line cards 0 to 7. Group 1 is the lower shelf containing line cards 8 to 15 and both RPs. The message reports the number of data links that are operating from the fabric plane to the specified group. The threshold is the number of data links that should be operating in order to make the fabric group reachable.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-MACH_PARSE_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: The named virtual service has an invalid parameter specified in the .xml file inside the .ova package.), (Recommended Action: Fix the .xml file inside the .ova package to have valid values. Then retry installing and activating it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-STATE
### Response:
(Severity: 6), (Category: MGBL), (Description: An change state occurred in the tacacsd.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ERR_ECM_OPEN
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver failed to open the event connection manager during the driver initialization. The driver will be non-operational due to this error.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-SESSION_NOT_STARTED
### Response:
(Severity: 4), (Category: L2), (Description: The platform failed to start a loopback session when requested to do so during a resync.), (Recommended Action: If any problems are seen, they may be rectified by restarting the edpl_ma process using the following command: - process restart edpl_ma)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-RACK_DOWN_NOTIF_SEND_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The reason should be supplied in the IOS message itself, but basically this message means that shelfmgr unable to send the rack down notification), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_LOSS_OF_CHANNEL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_INFO_OPER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, operational error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-7-RELOAD_NOTIFICATION_TEST
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The node received a test reload notification just to check functionality. The notification is ignored.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HARDDISK-7-UNKNOWN_MACHINE
### Response:
(Severity: 7), (Category: MEDIA), (Description: To derive the MODULE TYPE get the hardware board type ,the module processor type and revision number of the board and of the module. PLATFORM_GET_HW_BOARD_TYPE_REVISION fails when it unable to find the machine type.), (Recommended Action: 'Check EEPROM programmed correctly and also check whether it is cisco supported router ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-RIB_SRC_ADDRESS_ERROR
### Response:
(Severity: 3), (Category: IP), (Description: An error occured while trying to retrieve the IP address of the source interface from the RIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNLC_FPD-6-EXTEND_TIMEOUT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-MSI_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected an error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-TIME_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to clock_gettime failed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_ASIC_FAULT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot proceed due to the indicated error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-GET_LR_INVENTORY_ERROR
### Response:
(Severity: 3), (Category: HA), (Description: Failed to get the lr inventory.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-4-WARN_FIA_DRV_VQI_EPI_MAP
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fia VQI to EPI mapping for ALL ports will be restored to default), (Recommended Action: None, this is a warning message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-SECURE_BOOT_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: A Secure Boot validation error has been detected on the indicated card. IOFPGA driver will try to recover from this failure by power-cycle the card.), (Recommended Action: If the problem is persitent after multiple retries, it could be hardware related problem with the IOFPGA FPGA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALARM_MGR-3-CONSTRUCT_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error in alarm mgr construction failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to delete the number of commit IDs available for rollback operations?
### Response:
To delete commit IDs and limit the number available for rollback, use the 'clear configuration commits' command. RP/0/RSP0/CPU0:router#clear configuration commits
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MCAST_PAGE_ERR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multicast page error on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-REG_NETWORK
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process try to register itself with the network process and net io process for datapath.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_SVR-3-ADDRESS_MOVED
### Response:
(Severity: 3), (Category: L2), (Description: After restart of Accounting server the memory occupied by account server configuration is not same.), (Recommended Action: Do a restart of cmn_acct_svr process by using the command ' process restart cmn_acct_svr location <loc> ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-ROOT_USERDB_LOCK_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: A lock operation on shared resource, called by acctd lwDB failed due to the mentioned error.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALPHA_DRIVER-3-OVER_CURRENT_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Alpha driver received an over current alarm and the offending slot will remain powered off.), (Recommended Action: This log is to notify that an over current alarm has occurred - please reseat or replace the faulty card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_5_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PMLIB_IM-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: svc pmlib IM encountered an provisioning warning.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX_FPD-3-VERSION_MD5SUM_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: PLX FPD EEPROM is corrupted or due to I2C issues, incorrect values are being read leading to mismatch in md5sum between the EEPROM and the stored md5sum. The output of 'show hw-module fpd' will show the affected FPD.), (Recommended Action: In certain cases process restart of plx_fpd on affected or all locations will help to resolve the issue. If that does not help try an upgrade of the FPD.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-PTHREAD_OP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Current operation on a pthread failed.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-CANNOT_RUN_HBLOSS_SCRIPT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This may be a problem with lack of resources. The heartbeat loss log won't get collected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-BREQ_RCVD_AFTER_POWEROFF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The affected node is booting again after a failure attempt to power it off. The system will try to correct this problem by performing a forced power off operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-4-DEBUG_INIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB (D)RP component.), (Recommended Action: Platform software will correct itself if this happens.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPI_RX_PHY_RESET
### Response:
(Severity: 4), (Category: L2), (Description: Failed enable/disable interrupts on the specified SPI link), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. before reloading the line card If this problem persists, reload the line card using <CmdBold>hw-module location <>/<>/CPU0 reload<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FC-6-FWFILE_COPY_INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: Information about the firmware file that is copied by the firmware client), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_THREAD
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an unexpected error performing a pthread operation. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPFPGA-3-LINE_SIDE_SERDES_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Line-side Rx has errors like aligned/misaligned/burst/overflow ... Fault is detected/cleared.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-NO_MEM
### Response:
(Severity: 7), (Category: HA), (Description: Allocating memory failed due to a low-memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_UCORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE uncorrectable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS DiffServ tunneling modes?
### Response:
The MPLS DiffServ tunneling modes define how the MPLS experimental (EXP) field is treated when IP packets enter an MPLS tunnel. The pipe and short-pipe modes preserve the original IP precedence. The uniform mode allows the IP precedence to be overwritten by the MPLS EXP value. It is configured with the tunnel mpls traffic-eng exp command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialisation of trace functionality for nvgen failed. This would affect the debugging of nvgen.), (Recommended Action: If the message recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-RWLOCK_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Read-write lock failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-SR_ULOOP_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: Important information related to microloop avoidance), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMED_EM_ATTACH
### Response:
(Severity: 7), (Category: HA), (Description: The event detector has failed to attach an event handler for synchronous messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-EXTRA_AREA_ADDRESSES
### Response:
(Severity: 4), (Category: ROUTING), (Description: Area address TLV length TLV_LENGTH contains more than ISIS_MAX_AREA_ADDRESSES from SNPA_STRING (INTERFACE_NAME). This system recieved a hello or LSP containing more than the maximum number of area addresses. The additional addresses have been ignored.), (Recommended Action: Identify the source of the offending packet and correct it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-SPARSE_CORE_DUMP
### Response:
(Severity: 6), (Category: OS), (Description: The core for the process is sparse dump), (Recommended Action: Displayed when a process is crashed. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-ADJACENCY_DELETE
### Response:
(Severity: 6), (Category: L2), (Description: The adjacency for neighbor ip address was deleted.), (Recommended Action: Determine if the forwarding path to the neighbor has gone down.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-SYSDB
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected error occurred when the VTY Device DLL interacted with the SysDB client library.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR* *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-6-XFP_RETRY_READ
### Response:
(Severity: 6), (Category: L2), (Description: The Reading of XFP EEPROM failed; Retry is attempted), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-MIDPLANE_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB failed to midplane initialization due to the above error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may nbe rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LINK_LOCK_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: An expected database lock was not held. This could indicate a memory corruption problem.), (Recommended Action: Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-7-LTRACE_INIT
### Response:
(Severity: 7), (Category: OS), (Description: Lightweight tracing initialization failed), (Recommended Action: Restarting the processes may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-DBREAD
### Response:
(Severity: 3), (Category: IP), (Description: Fail to read a DHCPv6 binding database file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-INIT_PORT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath encountered an initialization error This error could occur for two reasons. 1. The system is low on resources. 2. A hardware error or an error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-REG_CONTEXT_EXISTS
### Response:
(Severity: 7), (Category: SYSDB), (Description: Sysdb is attempting to add a registration that already exists in its registration context. This will cause a sysdb server restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_MAC_IF_SESS_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address on the given access interface has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-EVM_CREATE_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to create event manager.), (Recommended Action: Restarting the client may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-REPO_ACCESSIBLE
### Response:
(Severity: 6), (Category: INFRA), (Description: The IOS-XR install infrastructure has successfully accessed the specified repository following a configuration change.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSLIB-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An initialization error message for an internal software error and will retry to recover the error.), (Recommended Action: No action required - it will keep retry forever to recover from error and once it succesful this error message stops.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_PKT_MAXLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SYSDB_PACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_MBE_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA00 burst FIFO multi-bit error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-COPY_CURRENT_CMD
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Hit general error. The error is displayed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE link-management timers feature?
### Response:
The MPLS TE link-management timers feature allows the configuration of timers to control the frequency of TE link state advertisements and processing. The periodic-flooding timer controls how often TE LSAs are flooded even without changes. The periodic-flooding threshold controls by how much bandwidth must change to trigger immediate flooding. The degraded-interval timer controls how often TE metrics are recalculated on degraded links.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_NETIO-5-SUBBLOCK_VERSION
### Response:
(Severity: 5), (Category: L2), (Description: When the PPP NetIO DLL was upgraded the existing data version was incompatible with the new software. NetIO will be restarted to recover the appropriate state.), (Recommended Action: This is not a problem, the message is just to explain why NetIO has restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-VIRT_INST_MGMT_INTERFACE
### Response:
(Severity: 3), (Category: OS), (Description: A management interface is configured but none is defined.), (Recommended Action: Deactivate the virtual service, remove the management interface configuration CLI, and reactivate the virtual-service.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-STBY_NOT_SUPPORTED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Clear command is not supported on standby RP), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-7-TFTP_DEBUG_REG_FAIL
### Response:
(Severity: 7), (Category: IP), (Description: Failed to register debugging services for tftp server. The system will continue to funtion, as this is not ststem impacting issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-3-ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: This is a debug message in the PSE Driver to indicate an operation or condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ASIC_FAULTS
### Response:
(Severity: 3), (Category: FABRIC), (Description: The asic fault detected and the details of the fault will be displayed in the string.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-EXCEED_MAX_PFX_LIMIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: User has configured a maximum-prefix limit which is lower than the current prefix count. In order to reduce the current count below the configured value, user needs to reset the session to reduce the prefix count if neighbor does not support route-refresh.), (Recommended Action: Reset the neighbor session if neighbor does not support route-refresh)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMS-3-SAVE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The client failed to save data to Checkpoint. If the process restarts before the save can be retried, then data loss could occur.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TMCAT_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a parity error.), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-EDM_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize EDM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-DLSYM_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: This message indicates that a process could not find the specified symbol in DLL name. The name of this DLL is included in the message. Functionalites of the process that failed to get the symbol from this DLL will be impacted.), (Recommended Action: This indicates the problem with DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-XIF_VQI_TBL_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected XIF VQI table multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_HB_MISS
### Response:
(Severity: 3), (Category: OS), (Description: The bcdl client library detected that it should have received a heartbeat from the agent, but didn't), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-MAIN_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Shmwin server initialization failed when setting up some resource in shmwin server main.), (Recommended Action: *SUPPORT)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-SYSDB_UNBIND_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The show line command was unable to un-bind to SysDB), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-PULSE_HNDLR
### Response:
(Severity: 4), (Category: ROUTING), (Description: FIB internally manages its activity using 'pulses'. An error occurred while processing pulses. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TARGET_CFG_UNLOCKERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen client failed to release exclusive lock held by this session.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different IS-IS authentication types?
### Response:
The IS-IS authentication types are:
- Clear-text password (per-interface or per-area)
- HMAC-MD5 authentication with key chain (per-interface or per-area)
- Hashed password in LSPs (validate or send-only)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR0_INTR_DC3_MAX_DROP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR0_INTR_DC3_MAX_DROP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-3-SYSDB_BIND
### Response:
(Severity: 3), (Category: SNMP), (Description: udp_snmpd binds to SysDB to receive notifications on the trap destinations udp_snmpd typically use these notifications to add trap destination to the trap Q. If udp_snmpd cannot bind to SysDB, these SysDB notifications will not be received, and thus some trap desination will not be added and traps will not be sent to those destinations.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIB-3-BADTRANSPORT
### Response:
(Severity: 3), (Category: SNMP), (Description: Attempted to perform the indicated operation on an unknown transport type. This is an internal software error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-SW_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Some requested operation failed during initialization. The text of the message displays the failed operation with error code.), (Recommended Action: This error is seen while SRP is getting initialised on LC. Check 'sh log',if any other error is seen on linecard or MSC. Try performing SPA/PLIM process restart by executing CLI 'process restart <process name> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-6-AGG_BUN_INCONSISTENCY_CLEARD
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_1_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-MALLOCFAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: The requested memory allocation is not available from the specified memory pool. The current system configuration, network environment, or possibly a software error might have exhausted or fragmented the router's memory.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT0_OFLOW
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP overflow error on the HT0 interface. This error is logged when a packet is received and has no buffer available to receive it.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZEN-6-FPD_ERR
### Response:
(Severity: 6), (Category: INFRA), (Description: The message indicates that new zen boot header is missing, have to use backdoor command to do upgrade. The command will upgrade spi flash with new boot header, working image, and golden image.), (Recommended Action: Go to /opt/cisco/calvados/bin, try ./zen_driver_test_cli -A -c 0.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-NOT_INITIALIZED
### Response:
(Severity: 3), (Category: SECURITY), (Description: tamsvcs process failed to initialize succesfully.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAOC768-3-PIO_CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A critical error occurred in PLAOC768 Driver which involves exiting the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-3-NODE_NOT_RELOADED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shelfmgr running on the active RP has to reload the node but its fails here.), (Recommended Action: DRP is self rebooting due to shelfmgr reload fails, so it's rebooting ungracefully with kernel dump.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-EA_ICL_CREATE_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error when an ICL interface was being created. No hardware programming was done for the ICL interface. The error may be becasue there was a QoS Policy already applied on the interface.), (Recommended Action: Try removing the QoS policy and ICL related configuration, and then try creating the ICL without any QoS policy attached on the interface. In terminal configuration mode 'interface <interface name>' 'no service-policy input | output' 'commit')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-FAILURE_DURING_MODIFY
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error when modifying the policy on an interface. Neither the old policy nor the new policy is applied in hardware for this interface.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-INTERFACE_RESYNC_QUERY_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: The linux kernel has requested a resync of information, and so XLNCd has marked information about the interface as stale and queried linux kernel for a replay of that information. However this query has errored, meaning XR and linux may now be out of sync in terms of interface attributes), (Recommended Action: If the problem persists, restart XLNCd. If the problem persists through process restarts, If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_BIST
### Response:
(Severity: 3), (Category: FABRIC), (Description: Built-In Self-Test failed for Fabricq ASIC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMC_GTRIE_DEFAULT-4-INIT_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Error while initializing Gtrie. Initialization will continue), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-SHELFMGR_PULSE_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The IPC message from i2c server to shelfmgr failed due to the reason listed in the msg.), (Recommended Action: Check the path of file specified for download)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIRTIO-4-CTX_SHORTAGE
### Response:
(Severity: 4), (Category: L2), (Description: Set: A global SPP context shortage was detected in the VirtIO plug-in. Reception of packets from ports and other nodes is likely to stop at any point. Clear: A previous SPP context shortage was cleared. Normal packet I/O operations will resume.), (Recommended Action: If the problem does not clear, the node should be reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-2-FAILED_TO_FIND_VRF_DEFAULT_NNS
### Response:
(Severity: 2), (Category: INFRA), (Description: XLNCd requires vrf-default to exist as a Linux NNS for the process to run. The namespace should be created at startup, and if it does not exist, the system will be in a bad state.), (Recommended Action: Reload the box: the system has got into a bad state and should be started again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-GROUP_AUTHOR_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Group authorization failed.), (Recommended Action: 'Check AAA connectivity')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWCHUNKFREE
### Response:
(Severity: 3), (Category: OS), (Description: Resources were not able to be deallocated in timer wheels.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-4-RATE_LIMIT_EXCEEDED
### Response:
(Severity: 4), (Category: IP), (Description: The error occurs when DHCP control packet rate exceeds the configured limit or the default vaules 500 CPS.), (Recommended Action: Control the DHCP rate using)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_2_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-RX_UNSUPP_SESSION_PARAM
### Response:
(Severity: 4), (Category: ROUTING), (Description: The session parameters proposed by an LDP peer differ from those preferred by the platform. The differences are not sufficient to prevent the LDP session from being established, but may have an impact on label distribution operation.), (Recommended Action: If the parameters identified relate to the optional path vector-based loop detection mechanism, note that the IETF LDP specification recommends that when Loop Detection is enabled in a portion of a network, it is recommended that all LSRs in that portion of the network be configured with Loop Detection enabled and with the same path vector limit. If the parameters identified relate to some other aspect of the LDP session and the message occurs repeatedly, copy it exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_EVENT_CONN_OPEN
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to open connection with event manager. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-5-SYSDB_INIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The MFWD-HFR library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-LOSS_OF_SYNC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered Loss of sync on interlaken interface.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-RTRINIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization of the router thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the additional following commands: - show tech-support routing ospfv3 detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-MEM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: fail to allocate memory.), (Recommended Action: show process memory <> to find out whehter there is potential memory leak show memory <> to confirm system memory goes low *SH_CMD sh plim pla trace info <> *SH_CMD sh plim pla trace error <> *SH_CMD sh plim pla trace all loc <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_GROUP_CREATE_LWG
### Response:
(Severity: 3), (Category: OS), (Description: A call to a group services interface failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-4-FOP_PM_LOWER_LEVEL
### Response:
(Severity: 4), (Category: L2), (Description: A ring node detects an R-APS message with a lower level than the configured G.8032 instance level for that APS Channel. This is a Failure of Protocol - Provisioning Mismatch - Level due to a misconfiguration of the APS level of nodes in the ring.), (Recommended Action: Identify the other node with Node Id and reconfigure it with a matching APS level.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV4_MRIB-3-INIT_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: MRIB (multicast routing information base) failed to initialize. MRIB is the central routing information base for multicast components. It provides coordination among all multicast routing components and forwarding. The effect is that multicast forwarding will not function. %s - indicates the reason for the failure.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process when this error is encountered to recover. Execute 'show process mrib' to verify that the process is up and running. If it is still non-operational, try doing 'process restart mrib' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON-3-PM_TOO_MANY_RESTARTS
### Response:
(Severity: 3), (Category: INFRA), (Description: Sysadmin process manager has restarted too frequently. Sysadmin will reboot if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-7-STRING_LENGTH_TOO_LONG
### Response:
(Severity: 7), (Category: OS), (Description: The string length is too long.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-LINK_ERR_EGR_TX_FIFO_OVERFLOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Link up failure due to egress path failures.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - show tech-support ethernet interface location <> - show controller <> phy - show controller <> internal)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-4-SYNC_ERROR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The requested sync of subscriber sessions could not be done due to specified error. Operation can be retried after error condition is resolved. This is in response to the synchronize CLI exec command.), (Recommended Action: None required since this is in response to an administrative action that caused this synchronization of sessions. Operation can be retried and troubleshooting required if error persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-NO_PREQ_ENTRY
### Response:
(Severity: 7), (Category: OS), (Description: Couldnt find pending request entry in the pending list. The response which came couldn't find the corresponding pending request in the list.), (Recommended Action: This is a Debug message.No action required. If the problem persists,Contact Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnetmgmt-4-DSCP_VERIFY
### Response:
(Severity: 4), (Category: IP), (Description: An error occurred while trying to verify dscp configuration. This failure can occur due to any of the following reasons. 1. when Item name not specified. (item name will be like <vrf-name>/<proto_name>/dscp) 2. If the size of the buffer used to store the Item name is less than the required 3. Fail to open the file pointed by the Item name.), (Recommended Action: Please get the information specified under the component required_info and call your Cisco technical support representative and provide the gathered information with this error message text. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-4-WARNING_FIPS
### Response:
(Severity: 4), (Category: SECURITY), (Description: The sshd encountered a warning condition.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-DB_INIT_FAILURE
### Response:
(Severity: 4), (Category: MGBL), (Description: An error was encountered during initialization of the commit database. This is most likely due to an error in reading the commitdb info file, which could be due to disk0: or CFS being corrupted or the file itself being truncated. The system recovers from this situation by cleaning up all files in commitdb if needed and initializing it empty. This may result in loss of all rollback points. However, this should not cause loss of configuration as the system applies the alternate ASCII file maintained for such situations. In certain scenarios, changes made in the last one or two commits may be lost.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WATCHDOG-3-FAIL_TO_INIT
### Response:
(Severity: 3), (Category: INFRA), (Description: An unrecoverable error occurred during watchdog monitoring service initialization. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is Management Plane Protection (MPP) and why is it used?
### Response:
Management Plane Protection (MPP) is a feature that helps secure management traffic by explicitly designating the interfaces that management protocols can use. It restricts the interfaces on which management protocols are allowed, preventing unauthorized access if an attacker gains control of a non-management interface.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_PMLIB-2-ERROR_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Platform Manager client library encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: Check if the process is blocked using- 'show process blocked location <r/s/i>' if the pm process is blocked restart the process using- 'process restart <process name> location <r/s/i>' to recover from this error. Please collect output for 'show log location <r/s/i>' and 'show memory summary location <r/s/i>' from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-PROCAGENT_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed procagent initialzation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-3-BUSY_FLAG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The busy flag for this particular operation mentioned in the message failed to clear for some reason. The MLAN switch was reset. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Collect console log and the following information. - show control mlan switch-status - show control mlan switch-atu - show control mlan port-status 1 - show control mlan port-counters 1 - show control mlan port-status 2 - show control mlan port-counters 2 - show control mlan port-status 3 - show control mlan port-counters 3 - sh process ether_ctrl_mgmt)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_LIB_IFDB-3-UNKNOWN_IDBTYPE
### Response:
(Severity: 3), (Category: L2), (Description: If IDB type will not be find out in subtree recursively i.e.it will iterate on each non-leaf child untill all leaves in subtree have been visited. If this IDB type does not recognised that means it is not a leaf , not a root and not a node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-1-ERR_HW_DISABLE_NODE
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error is detected on the PLIM. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will put linecard in RESET state. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error.), (Recommended Action: If the message recurs, diagnostics should be executed on the PLIM and MSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LWMESS-7-LOCK_CONN
### Response:
(Severity: 7), (Category: OS), (Description: The mutex for the channel connection list could not be held), (Recommended Action: This is an internal error and should be reported to TAC. Try re-starting the offending application. If that does not work, a memory dump should be taken (to assist TAC) and the router should be rebooted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-WAIT
### Response:
(Severity: 3), (Category: IP), (Description: rlogin client's call to wait() system call failed), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-MAP_SERVER_SITE_EID_PREFIX_LIMIT_THRESHOLD
### Response:
(Severity: 4), (Category: IP), (Description: 'Dynamic EID prefix entry count has reached or exceeded ' 'the configured threshold. This is used to warn the ' 'adminstrator that corrective action may need to be ' 'taken to avoid reaching the map-server EID prefix ' 'limit.'), (Recommended Action: 'No immediate action is required unless the ' 'entry count is very close to the configured ' 'limit at which point the limit on the map-server ' 'needs to be adjusted.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-LSA_LEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: The router router-LSA became larger than the OSPF protocol imposed maximum. Only partial link information (up to allowed maximum size) is inserted into the LSA.), (Recommended Action: You need to decrease the number of OSPF interfaces in the reported area. Alternatively, making the interfaces unnumbered will also decrease the router-LSA size.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEAT_MGR-4-TCAM_ERR
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Feature Manager encountered error in completing TCAM operation. This can lead to mismatch between hardware and software configuration.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you verify the software installation on Cisco IOS XR?
### Response:
To verify software installation on Cisco IOS XR, the 'show install active' command can be used to display the currently active software packages on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of using the 'install add' command in Cisco IOS XR?
### Response:
The 'install add' command in Cisco IOS XR is used to add new software packages to the router without disrupting the current operation, allowing for seamless updates and upgrades.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the TURBOBOOT process in IOS XR?
### Response:
TURBOBOOT is a process used for the initial installation of IOS XR software images and packages onto the router's boot device (usually disk0: or disk1:). It loads the image from a .vm file, validates it, creates required directories, and copies the packages to the boot device. TURBOBOOT is typically invoked from the router's ROMMON mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEAT_MGR-3-REPRGM_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: When an ACL definition is changed which is used by a some class-map as a match criteria, it result in reprogramming of all the polices which are using this class-map and are already applied to some interfaces. This message lists the policy-map and ACL for which errors have occured during reprogramming.), (Recommended Action: Detach policy-map in the error message from all interfaces of the line card where issue is seen. Now, re-attach policy-map to the interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_0_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-3-READLINK
### Response:
(Severity: 3), (Category: OS), (Description: Failed to get original filedname for the fd.), (Recommended Action: Copy the message exactly as it appears, and report it your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAMSG-3-NULL_EVM
### Response:
(Severity: 3), (Category: L2), (Description: Only critical if SPA debugging is not yet initialized. It means somebody may try to use uninitialized debug events.), (Recommended Action: Try to use initialized debug events)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM_PLATFORMS-2-ERR_STR
### Response:
(Severity: 2), (Category: L2), (Description: Error in cem operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-4-WARN_ERRNO
### Response:
(Severity: 4), (Category: SECURITY), (Description: Warning.), (Recommended Action: 'NO ACTION')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_CCI_CREATE_Q
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot create pdma queue required. Likely a asic driver does not come up properly %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %d - number of seconds elapsed), (Recommended Action: Investigate if driver processes(ingressq, egressq or fabricq) initialized properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_PKT_WITH_INVALID_SID_RECEIVD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: A packet with an invalid session ID has been received. This indicates that a subscriber has started communicating with this AC after initiating this session with another AC.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_UCORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory uncorrectable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_FILE_PATH
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, file path.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_7_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-OBFL_FLASH_ACCESS_FAILED
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised upon OBFL flash access failed.), (Recommended Action: Contact TAC to collect /var/log/kern.log from host to get UBIFS error message from kernel log)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-2-PANIC
### Response:
(Severity: 2), (Category: MGBL), (Description: A critical internal error has ocurred which requires the process to restart. For example if a lock cannot be released then the process is restarted to avoid deadlock.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_PKT_F3_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 3 multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALARM_MGR-3-LVM_CREATE_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: LVM create failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an SNMP community?
### Response:
To configure an SNMP community, use the 'snmp-server community' command in global configuration mode. RP/0/RP0/CPU0:router(config)#snmp-server community public ro
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-LISP_TCP_SESSION_STATE_CHANGE
### Response:
(Severity: 5), (Category: IP), (Description: 'This message is a notification that the specified LISP TCP session ' 'has come up/down. Please note that the messages are rate limited to ' '1 message per second and a session state could have changed without ' 'generating a message'), (Recommended Action: 'If the session is expected to come up/down then no action is required. ' 'Otherwise, investigation regarding the session going up/down should ' 'be done.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-EXTRACT_IDPROM_INFO
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager was not able to extract inventory info from the IDPROM data of the module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_AGT-3-ISSU_DIR_COMM_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: ISSU Agent is unable to send a message to ISSU Director via ISSU Director's CAPI service. This suggests that there is an issue with ISSU Agent's connection with that service. ISSU Agent will respawn to retry.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_AUTH
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error encountered in RIP authentication module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-2-RSI_UNKNOWN_EVENT
### Response:
(Severity: 2), (Category: OS), (Description: RSI sent unknown event), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-INFO_IMDR
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabricq server iMDR debug/info messages. These are Unit-Test log messages and presently they are commented. So, only Dev team can enabled this message and use it. Hence more info on this log is unncessary.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-2-ERR_CGV6_SERVICES_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An error occurred in initialization of CGV6 Services . If this occurred during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: Restart the cgv6_services process (process restart cgv6_services location <>) If the issue persists, do a cold reboot Services CGV6 MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_VRFNRES
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-3-DETECTED_ERROR_PDMA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver detected an error during packet DMA.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-CARD_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Entity specified in the messages is inserted into the chassis and inventory manager is updated. This message is used by CWI/CTM to determine when the entity-related information (read from the EEPROM) is available in inventory database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_COMM-3-CARD_SUPPORT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: This is a message indicating unknown nodeid or card type and the process will abort), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ASIC_HALTED_VIA_CPLD
### Response:
(Severity: 6), (Category: FABRIC), (Description: The specified device is halted using the CPLD register.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-INIT_LTRACE_ERROR
### Response:
(Severity: 4), (Category: MEDIA), (Description: Media server is unable to initialize the ltrace buffer for logging.), (Recommended Action: Collect system log information. No functional impact if it is just the ltrace buffer initialization issue. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN carrier supporting carrier feature?
### Response:
The MPLS VPN carrier supporting carrier (CSC) feature enables one MPLS VPN service provider to allow other service providers to use a segment of its backbone network. The service provider that provides the segment of the backbone network to the other provider is called the backbone carrier. The service provider that uses the segment of the backbone network is called the customer carrier.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the protocol shutdown command in IS-IS?
### Response:
The protocol shutdown command is used to administratively shut down IS-IS on a router. When IS-IS is shut down, the router does not send or receive IS-IS packets and all IS-IS adjacencies are torn down. This command is useful for gracefully shutting down IS-IS during maintenance or troubleshooting.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-ISSU_BRINGUP_DELAY
### Response:
(Severity: 4), (Category: L2), (Description: Set: Bringup Delay is active for one or more ports. The port states may change when ISSU Run is activated, resulting in a change in the active topology. Clear: The alarm is cleared for one of the following reasons: - Bringup Delay is no longer active on any ports, and the active topology may have changed as a result. - The ISSU operation has been aborted, and Bringup Delay is still active for one or more ports. The active topology is unchanged.), (Recommended Action: Use the output of <CmdBold>show spanning-tree mst <protocol instance><noCmdBold> to verify which ports have Bringup Delay active, and to check the expiry time of the timers. To avoid a change to the active topology, ensure that Bringup Delay is not active on any ports when activating ISSU Run.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_drop-3-DEBUG
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem with the debug infrastructure was encountered by the service diversion drop processing in NetIO. This is not fatal, and simply means that the 'debug services diversion drop' commands may be unavailable. All non-verbose messages are still traced in a circular buffer, and the most recent of these can be inspected with the 'show services diversion drop trace' commands.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COND_DEB_RP-3-NOIPCONDDBG
### Response:
(Severity: 3), (Category: SECURITY), (Description: The request to use using IP address as condition for a crypto debug message could not be accomplish.), (Recommended Action: If displaying of crypto debug messages is needed, please use regular crypto debug mechanism instead of conditional crypto debug mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_LWM_CONNECT
### Response:
(Severity: 7), (Category: HA), (Description: The msg_chan_connect function reported an error trying to connect to the specified Embedded Event Manager server channel.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-CFG_FAILED
### Response:
(Severity: 4), (Category: HA), (Description: wd_config_init failed due to sysdb intialization problem.), (Recommended Action: Collect all logs, especially those from wdsysmon. Also collect output from 'show watchdog trace'. Forward the messages to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-OPERATION_COMPLETED_WITH_ERRORS
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified install operation in the error message completed with errors. The operation will be a single command upgrade (install replace commit)), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Collect the install operation logs by running 'show tech-support install' on admin as well. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-6-AGG_BUN_INCONSISTENCY
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD_LIB-5-FRR_BELOW_THRESHOLD
### Response:
(Severity: 5), (Category: ROUTING), (Description: Threshold configured for RCMD Frr Coverage monitoring was reached.), (Recommended Action: If the time taken is unusually low Frr coverage then further analysis can be performed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_DRIVER-7-NODEID_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: An error happened for a nodeid operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-TABLE_PER_PREFIX
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route accounting in a table), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-DEVICE_INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Unable to initialize device.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-XR_ACTIVE_PKGS_MISSING_IN_REPO2
### Response:
(Severity: 3), (Category: INFRA), (Description: One or more active XR packages are not found in repository. When a node goes through internal pxe or a new card is inserted, XR will fail to come up on that node as packages in active software profile is missing and XR prepare will fail.), (Recommended Action: Install add the packages that are mentioned to be not found in the XR repository and please reload all the node(s) on which XR failed to come up, reload the node after install add is successful.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-FIXED_INTERVAL_TEST
### Response:
(Severity: 4), (Category: DIAG), (Description: The specified health monitoring test interval is not user-configurable and therefore cannot be changed.), (Recommended Action: Nothing. The specific health monitoring interval is not user-configurable by design so nothing can be done to change the interval.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-UNEXPECTED_BPDU_RECEIVED
### Response:
(Severity: 4), (Category: L2), (Description: A BPDU was received on a port that was configured for Portfast. This port will now revert to a 'non-edge' port.), (Recommended Action: Check network configuration. Should this port really be configured for portfast? Has a new network device been added to the network?)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SB_SERDES_1_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data south bound serdes link 1 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISKCAM-3-ERR_PASS_THROUGH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Media device shutdown operation failed to pass through.), (Recommended Action: *SH_CMD show logging*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_EXTERNAL_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) is unable to set up tracing. This will not prevent ND from working, but will impair its ability to record its activities and will make diagnosing any unexpected behaviour more difficult. This condition may result from a lack of system resources such as memory.), (Recommended Action: Use the <CmdBold>show memory summary [location <node-id>]<noCmdBold> command to determine the state of system memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-5-MEM_UNTHROTTLE
### Response:
(Severity: 5), (Category: IP), (Description: At some point, memory usage had exceeded ANCP's budgeted threshold. Memory has been freed putting it back in a safe level of memory usage.), (Recommended Action: No action needed since memory is back in the safe zone.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-4-GX_DISABLE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Disabling diameter gx app is not recommended.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-DU_SYSDB_HW_TREE_BIND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Binding of sysdb to hw tree gets failed. Also publishing information to sysdb and setting up sysdb name for platform in hw tree got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-PLIM_EVENT_INIT_ERR
### Response:
(Severity: 5), (Category: L2), (Description: Creating SPA event handling server failed.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-RFI
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-4-WANPHY_SPA_TIMEOUT
### Response:
(Severity: 4), (Category: L2), (Description: If the Wanphy spa exist in ISSU case then 3 mins timeout is used), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_SHUTDOWN_JID
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-CFG_INVALID
### Response:
(Severity: 4), (Category: L2), (Description: There was an error when decoding the config from SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-NO_CB
### Response:
(Severity: 7), (Category: LIBRARY), (Description: The replicator library did not receive a callback from the transport library. The update will be allowed to continue without the replication acknowledgement. If any replicas have not received the update, they will resync on the next update.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-SESSION_NOTIFICATION_ABORT
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to notify line status change.), (Recommended Action: If you want to close existing session, please run 'clear line' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-5-ROLE_SLAVE
### Response:
(Severity: 5), (Category: SUBSCRIBER), (Description: The SRG role from the concerned group has change to SLAVE from either MASTER or uninitialized role. This is a normal redundancy event.), (Recommended Action: None required if there has been any network event or administrative action that caused this redundancy role change. Subscriber status may be checked on the master and slave routers to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-OUT_OF_MEMORY_UNKNOWN_SIZE
### Response:
(Severity: 3), (Category: L2), (Description: The system is low on memory.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOC_DSX-1-SPA_RESET_NEEDED
### Response:
(Severity: 1), (Category: L2), (Description: Due to framing change on SONET port, SPA need to be reloaded for spa to function properly.), (Recommended Action: Reload the SPA using CLI 'hw module subslot <R/S/B> reload')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge domain ARP suppression?
### Response:
To configure ARP suppression for an L2VPN bridge domain, use the 'arp suppression' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
arp suppression
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-FGID_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPFv3 was unable to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. If conditions warrant, upgrade to a larger memory configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPP-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-NETLINK_MSG_PUT_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: libnl failed to allocate a message header for querying the interfaces in a network namespace.), (Recommended Action: If the system is experiencing memory exhaustion, resolve the underlying issue then restart the process. If the problem persists, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-5-MPLS_REPLAY_OK
### Response:
(Severity: 5), (Category: ROUTING), (Description: Serivce layer successfully replayed MPLS objects to Label Switching Database from a previosly errored state), (Recommended Action: No action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-7-NODEID_INFO
### Response:
(Severity: 7), (Category: OS), (Description: Could not get the nodeid corresponding to the node name %d- error code %s- node name), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_RX_ALIGN_LOSS_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Rx alignment loss on XAUI to NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_RIB_CONN_SETRETRY
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to set the linear retry period for connecting to the RIB. This error will not affect IS-IS operation but does indicate an unexpected result.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Failed while creating event manager), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELOGM-4-DEBUG_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: Whilst exiting, the Global Manager failed to cleanup the debug module. The process will exit anyway, and no further errors should be seen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a prefix list?
### Response:
To configure a prefix list for route filtering, use the 'prefix-set' command in global configuration mode. RP/0/RP0/CPU0:router(config)#prefix-set PREFIX_SET1
RP/0/RP0/CPU0:router(config-prefix-set)#10.1.0.0/16 le 24
RP/0/RP0/CPU0:router(config-prefix-set)#exit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-HELLOINIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization of the hello thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the additional following commands: - show tech-support routing ospfv3 detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-SERVICE_LEARNT
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'The device received a new autonomic service ' 'by Service Discovery Protocol'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal system error occurred.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-6-ERROR_CHKPT_SAVE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: A failure was encountered in recording the latest data persistently. The operation will be retried the next time interface parameters change. However, a process restart in the meantime (e.g. due to an install operation) may cause incorrect parameters to be programmed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVENT-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Allocation of the specified resource failed because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-IP_ADDR2_HEX_STRING_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Conversion of ip_addr_t to string failed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-POWERDOWN_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node will be reset because user has administratively 'power disable' or 'no power disable' the node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-ABORT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An unexpected software event has caused the shelfmgr process to restart.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_QAD_EGRESS_QUEUE_MISSING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to find the qad queue for egress packets. This could causes applications using this qad queue not sending out packet %s - QAD queue name %s - thread name), (Recommended Action: Reload the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_1_RX_FRAME_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-1 received an errored frame interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_EDM-3-SYSDB_BIND_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to connect to SysDB while starting the indicated subsystem.), (Recommended Action: restart policy_repository and check for re-occurence of issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-GEN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: General error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONCERTO-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: CONCERTO Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: ClkCtrl Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-MEMORY_INFO_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process failed to get memory state info from wdsysmon when it came up.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-7-FILE_OPEN_FAIL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Failed to open the specified file.), (Recommended Action: Check for disk corruption using 'fsck' disk check CLI. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_AMCC2035-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-ASSERT_RL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal consistency check failed. There may be no immediate impact on traffic, but this issue should be addressed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-4-PA_BIND
### Response:
(Severity: 4), (Category: IP), (Description: A call made to pa_client_bind has failed.), (Recommended Action: Restarting lpts_pa and then ipv6_io may fix this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ASIC_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The asic initialization failed due to the above mentioned error.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_MA-3-INTF_CREATE_FAIL_CLEANUP
### Response:
(Severity: 3), (Category: SERVICES), (Description: The VASI Manager failed to completely clean up interface state after an interface creation failure. This would have left the system in an inconsistent state. This will mostly occur due to invalid arguments.), (Recommended Action: Check the debug traces for errors to know the exact reason for failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TEMP_OUT_OF_RANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-LABEL_ERR_MOD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Route already has a local-label from another protocol.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-NULL_PTR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error has occurred in an application that has caused it to pass invalid data to the MBI infrastructure. The current request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-EDM_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Failed to initialize the EDM, for CE-TFTP server. The system will not be impacted and will come up. *RECUR*), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-INVMGR_CONN_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to connect to inventory manager.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8111-2-UNSUPPORTED_REQUEST
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIE device reported an unsupported request), (Recommended Action: This error is a momentary error and software should be able to correct it. If this error persisted for a period of 60 seconds, please perform the following actions: 1. Please check for read/write access to the attached compact flash or eUSB device by creation a temporary file. 2. If the problem still exists, please reload the board using the following command: 'reload location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can BGP prefixes be originated using the network statement?
### Response:
The network statement is used to advertise a prefix if it exists in the routing table. The mask of the network statement must match the mask in the routing table. The route must be in the routing table before BGP will originate it.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-2-GEN_CRIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_TCAM_RM-3-LOG_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in CPP TCAM RM which involves exiting the process.), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure tcam resource-manager usage location < > * *SH_CMD show controllers pse qfp infrastructure tcam resource-manager error parity location < > * If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VI_REPL-3-ISSU
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during the special handling that takes place during an ISSU operation.), (Recommended Action: The consequences of this error are unpredictable. There may be no problem but it is also possible it will affect virtual interface configuration during the ISSU. It is advisable to check all virtual interface configuration on the active and standby nodes before continuing with the ISSU operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-7-ERR_REGISTER_SET
### Response:
(Severity: 7), (Category: FABRIC), (Description: An attempt to write a Hardware register failed.), (Recommended Action: Run diags on the board and contact TAC support. If it is possible to isolate the trigger point for the set failure, collect all the necessary condition that caused the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-THREAD_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPFv3 failed to create a thread essential to its operation. This is an internal error. An automatic restart of the OSPFv3 process was necessary to attempt recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-CONNECT_ATTACH
### Response:
(Severity: 3), (Category: OS), (Description: SSM process tried to connect to the clients channel using ConnectAttach api and encountered a failure.), (Recommended Action: Collect system log information for the reported service and pid. Collect show process <pid> , follow process <pid>, show process blocked Collect show tech ssm. If this message is seen repeatedly, capture the output of debug event-manager all job <ssm jid>. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_ERRDIS_NOTSUPPORTED
### Response:
(Severity: 4), (Category: L2), (Description: A member interface could not be error-disabled as the driver claims not to support this feature. If the member is running in Ether/POSChannel mode, traffic may still be received on this member - this may breach configured QoS policies and will prevent an mLACP brute-force switchover from taking place.), (Recommended Action: Shut and no-shut the member interface may clear the condition. If the error persists, manually shutting the member interface will prevent any QoS breaches.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-REMOTE_SLAVE_LEFT_LOOPBACK
### Response:
(Severity: 6), (Category: L2), (Description: While running the link in OAM Loopback mode, with the local peer as the Master, the Slave peer abruptly ended Loopback mode without being told to do so by this peer. This may indicate a problem with the remote peer.), (Recommended Action: No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-6-HBM_LANE_REPAIR_LANE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates HBM PHY lane number needing repair/), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-TIMER_ADDL_CTXT
### Response:
(Severity: 4), (Category: IP), (Description: The IPV6 MA process failed to add context to timer.), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_MUTEX_DESTROY
### Response:
(Severity: 7), (Category: OS), (Description: A internal mutex destroy operation has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_LIB_TOKEN-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when registering debug.), (Recommended Action: This is not a critical error and it can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-DEVCTL_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Status Database server (FSDB) failed to read a rommon variable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SLICE_OPER_STATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates that a fault occured during a change in oper state of slice.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_VLAN_EA-3-HSRP_SUPPORT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HSRP is not supported if - hw-module vrrpscale enable - is not configured), (Recommended Action: Please capture the complete error log. Please check the data sheet for the supported configuration. Please contact TAC for any support on this)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-USER_OP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The given user requested the given operation for the given location.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-POOL_STATUS_UNKNOWN
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFM encountered an pool state error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-WTX_MSG
### Response:
(Severity: 4), (Category: ROUTING), (Description: WAIPC related message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-6-NBR_NOPOLICY
### Response:
(Severity: 6), (Category: ROUTING), (Description: No routing policy has been configured for the specified eBGP neighbor in the given direction (inbound or outbound) for the address family named. To avoid unintended routing effects, no prefixes will be accepted in that direction until some policy is configured. 'Policy' can be a route-policy, or (for inbound policy) it can be a prefix list.), (Recommended Action: Configure a route-policy for the neighbor in the given direction. If the desired behavior is to accept/send all routes, the route-policy should contain the single statement 'pass'. If the desired behavior is not to accept/send any routes, the route-policy should contain the single statement 'drop'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ERR_RETRY_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP discovery transport address?
### Response:
To configure the LDP discovery transport address, use the 'discovery transport-address' command under the MPLS LDP interface configuration. RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-if)#mpls ldp discovery transport-address 192.168.1.1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-BAD_HEAPPAGE
### Response:
(Severity: 7), (Category: HA), (Description: A heap page address is misaligned or lies in some invalid range.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-UC_LO_OVR_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Unicast low priority fifo overflow error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-INSTALL_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: An error was encountered while the Central Configuration Validator (CCV) was attempting to check if files or libraries upon which it is dependent were changed in an install operation. Any changes found would have prompted CCV to restart.), (Recommended Action: The problem may be caused by system resource limitations. Attempt to address any resource limitations before proceeding. If files or libraries upon which CCV is dependent have recently been changed, or if further problems are seen, try restarting the process using the 'process restart ccv' command. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_STORM-4-SC_DELETE_WARN_IFH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Resets storm control config on this main interface across all BDs), (Recommended Action: Provision fresh storm control configs to police the traffic again)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-EVPN_ROUTE_TYPE_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unsupported route type update received.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_QUEUE_MODEL-3-SHMWIN_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Shared memory access operations like init,open or bind might have failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-BER_SD_ALARM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provide information that Signal Degrade BER (Bit Error Rate) alarm is set or cleared on a specific port based on the BER configuation. port: on which alarm is set/cleared status: set/cleared), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh running interface <> - sh controller <interface> <R/S/I/U> all - show tech-support ethernet interface location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SEIPC-3-OPERATION_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Encountered an error in debug module. This error should not impact the major functionality of the module. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize modules. Typically, this occurs when the software tries to initialize the modules. - Failed to shutdown modules. Typically, this occurs when the software tries to shutdown the modules.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-SYNC_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to perform standby sync operation), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_STORM-3-SC_EXIST_ERR_INTF_NAME
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to program storm as it is conflicting with an existing AC), (Recommended Action: Remove storm control config on this sub-interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-PROC_SM_TIMEOUT
### Response:
(Severity: 3), (Category: L2), (Description: BFD proc SM timed out because of state timer expiry.), (Recommended Action: Restart corresponding bfd process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-TTY_NMSPC_PATH
### Response:
(Severity: 3), (Category: IP), (Description: 'Unable to get the sysDB path of an item from TTY nmspc library'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-LWA_ADD_DIR_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: A file with the same name as aaa directory detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-FTRUNCATE_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: ftruncate system call returned an unexpected error Debug trace buffer initialization failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON-3-PM_REPORTED_BAD_STATUS
### Response:
(Severity: 3), (Category: INFRA), (Description: Sysadmin process manager reported bad status. Sysadmin will reboot if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_RC_HEX
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, hex_code of rc.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink_CLNT-3-CMD_RETURN
### Response:
(Severity: 3), (Category: L2), (Description: Could not retreive bundle info. Returned error while handling Network to Host endianness.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FMI_NETIO_DROPPED_PACKETS
### Response:
(Severity: 3), (Category: SECURITY), (Description: An error has occured during packet handling in the FMI base capsulation, and no error counters can be updated. If errors are seen for an extended period then it can be assumed that no packets can be forwarded through FMI interfaces. This is likely to be a symptom of a problem in the Packet Forwarding Infrastructure - earlier error messages might indicate the root cause of the problem.), (Recommended Action: If the errors stop after a couple of minutes while traffic is still flowing through the FMI then it can be assumed that the problem has resolved itself. If the problem continues, then unconfiguring and reconfiguring the FMI interfaces could fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-EVM_MSG_ATTACH_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper attaches various callbacks with resource manager. Failure to register event callback functions might lead to unexpected behaviour of dumper.), (Recommended Action: Please collect the following data and contact support. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-FMEA_BOARD_POWER_FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR0_INTR_PKT_EOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR0_INTR_PKT_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_LPTS-3-DOUBLE_FREE
### Response:
(Severity: 3), (Category: FABRIC), (Description: A software error occurred, when the PA attempted to double free the FGID), (Recommended Action: No action required Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERR_OBJECT_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates a failure in creating the object for the specified slot. The entry is not added to the inventory. %s - indicates an internal message), (Recommended Action: Issue may be due to lack of memory in the system. If memory shortage is the cause, reduce other system activity to ease memory demands and restart process invmgr via CLI 'process restart invmgr' to recover. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIF_MA_DEBUG-3-DEBUG_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: debug library initialization failed), (Recommended Action: System will automatically retry initialization and no further user action is necessary. If problem, persists, please contact Cisco TAC for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ACL_PARSE-7-ERR_MEM_ALLOC
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_4_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-6-TTY_MGMT_REG_OPTIONS
### Response:
(Severity: 6), (Category: MGBL), (Description: The call to tty_mgmt_register_tty_options() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-RX_ALARM_RAI
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected RAI defect for incoming signal. Receiving remote alarm indication(RAI) means the far-end equipment over the T1/E1 line has a problem with the signal it is receiving from the upstream equipment.), (Recommended Action: Verify input BITS clock signal is set up correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL2-3-MSG_SEND_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: A call to function for sending BCDL msg to consumers failed. This could lead to inconsistency between BCDL producers and consumers.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMS-4-EMSD_PORT_RANGE
### Response:
(Severity: 4), (Category: MGBL), (Description: The configured port is outside of the range and will consume an additional LPTS entry.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TASKID_COMPARE_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'nvgen_server got an error from calling aaa_compare_tasktable_alt.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-4-MUTEX_LOCK_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A mutex lock acqure failed in the api context, for UDLD lib around the line number specified in error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support control ethernet fast location <node>, dumpcore running <process name printing this message> location <node>, console log for 1 hour before and 1 hour after this error message printed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support control ethernet fast location <node>, dumpcore running <process name printing this message> location <node>, console log for 1 hour before and 1 hour after this error message printed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-SHUTDOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node will be brought down because a critical environmental alarm occured.), (Recommended Action: Check air-flow, fan trays, and make sure that chassis is well-cooled. Manually boot up the node once the chassis has been checked.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_INTF_INIT
### Response:
(Severity: 3), (Category: L2), (Description: CDP is unable to run on the specified interface. It is likely that this is due to a lack of available resources.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Configuring 'cdp disable', 'cdp enable' on the interface, or restarting CDP on the affected node may recover the situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPC_I2C-7-BUS_HANG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An I2C bus hang has been detected. Recovery is automatically attempted. Should the recovery be successful, a BUS_UNHANG_SUCCESS message is issued; otherwise, an UNRECOVERABLE_BUS_HANG is issued.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_PLAT_PROPS
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error communicating with the Platform Properties DLL. The error message describes what operation has failed and why it failed. This will either have occurred because the Platform DLL failed to be properly initialized, or because of some error occurring in the platform dependent code.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in Shelf Manager, but there is not corresponding error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-MKDIR_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: system call failed. Dumper might get impacted by this.), (Recommended Action: Restart the dumper process. If the issue still exists, Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-OTN_LICENSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Necessary license for G709 is not found.), (Recommended Action: Purchase and install a valid license for G709. If a valid license is already installed or issue persists after installing the license, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh processes vic location <> - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SYSDB_REG_NOTIFY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Registration fail for sysdb notification), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-7-GENERIC_ERROR
### Response:
(Severity: 7), (Category: SECURITY), (Description: Generic error message used for internal debugging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-6-INFO_STATECHANGE
### Response:
(Severity: 6), (Category: IP), (Description: The VRRP router has changed state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_RECV_BAD_TE_MSG
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process has received a TE message with invalid contents. As a result, the TE message is ignored and TE tunnel may not come up.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-3-ALARM_NOT_GENERATED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Wait for dlls to get loaded since usb pkg is loaded before infra/watchdog (wdsysmon).And it wait for the disk to be mounted. Register with wdsysmon for diskspace monitoring. This error message will get printed when it unable to open path to register for diskspace monitoring and when no alarms are generated if configuration filesystem runs out of diskspace.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-6-TFTP_DISABLED
### Response:
(Severity: 6), (Category: MGBL), (Description: This is an informational message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-4-WARNING_LOGIN
### Response:
(Severity: 4), (Category: SECURITY), (Description: The sshd encountered a warning condition.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITCAM-3-no_entries
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Internal TCAM entries have been exhausted and cannot meet the current request.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_LQ_PKT_LEN_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 1 LQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-ANR_UP
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'The autonomic network registration authority ' 'has been confgiured and is locally up'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-HB_SEND_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SIM heartbeat sent to Service Engine failed, reloading), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-1-ECU_FAIL
### Response:
(Severity: 1), (Category: MEDIASVR), (Description: This ios_msg is raised upon failure to retrieve serial number from the inserted ECU Disk.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-DAEMON_ERR_SYSMGR_PROC_READY
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while signalling that initialization was complete.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_ASYNC_FIFO_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet Async FIFO multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP loop detection?
### Response:
To configure LDP loop detection, use the 'loop-detection' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#loop-detection
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-UNEXPECTED
### Response:
(Severity: 7), (Category: HA), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-PTHREAD_MUTEX
### Response:
(Severity: 3), (Category: OS), (Description: The mutex lock/unlock failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ADJ_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error: Cannot create the adjacency for a particular interface. Will retry for few times), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-MC_LO_MBE_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast low priority fifo multi-bit ECC error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-QUICK_MODE_TIMER_EXPIRED
### Response:
(Severity: 3), (Category: SECURITY), (Description: We can't wait forever before we start quick-mode and initiate phase II.), (Recommended Action: 'The most likely reason for failing to start phase2 is that the process failed to complete phase1. In this case, it should have also logged another message which should appear immediately before this one.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-VERIFY_APPLY_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: The policy_repository process, while verifying a change to a policy, encountered an error while checking the validity of the change in the policies that are applied by that policy.), (Recommended Action: Fix the offending argument in the applied policy so that it is accepted by the client (i.e. BGP, OSPF, etc.) If problem ins not fixed, please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP weight attribute and what is its range?
### Response:
The weight attribute is Cisco proprietary and is local to the router. It has the highest preference in the BGP best path selection process. The range is 0-65535 and paths with a higher weight are preferred.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_CFEC_LOL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-XBAR_TIMEOUT_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an crossbar timeout error on link 2), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_ALARM-3-L2FIB_ENTRY_LEAK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: L2FIB entry leaked resource. The resource cannot be recovered without user intervention), (Recommended Action: If leak does not become service impacting -- none. Otherwise, service impacting recovery methods must be taken. Crashing the l2fib_mgr process on the linecard where the leak was detected will recover the mac resource.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-6-LTRACE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB VPLS component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-FAILED_LC_RELOAD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: PRM has detected an unrecoverable error. The linecard will be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MAX_LEN_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error FIA 01 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_UCORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory uncorrectable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-DEBUG_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The IPV6 MA process failed to initialize debug support), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-6-PRINT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Print the static/decode data information.), (Recommended Action: This is informational print only, no action to be taken.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_0_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath cost-community ignore' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath cost-community ignore' command is used to ignore the cost community for best path selection. The cost community is a non-transitive extended community attribute that can be used to carry the cost of a route. By default, if the cost community is present, BGP will use it in the best path calculation. This command disables the use of the cost community in best path selection.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_ATOM-3-INIT_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the ATOM module in the platform L2FIB ATOM component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-3-COMMUNICATION_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified device has a fault that affects the card functionality. The card node will be reset and ideally or waiting to be debugged if the card node is in NMON mode. When action is reset, the problem will not happen again when it comes back up.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR9
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-3-CACHE_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: ARP has overwritten an interface entry with a static or alias entry. This indicates a conflict with the IP address configuration on the interface.), (Recommended Action: Reconfigure the static ARP entry or the conflicting interface IP address. If this does not help then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-MRIB_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error has occurred during communication with the MRIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mrib client error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mrib client error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-5-DEVICE_INCONSISTENT
### Response:
(Severity: 5), (Category: MEDIA), (Description: The media storage card specified is inconsistent between the partition table and the file system format. This inconsistency needs to be corrected and the contents formatted correctly.), (Recommended Action: Verify that media device was formatted. If not, then format media device manually. If it still fails, replace media device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option explicit name feature?
### Response:
The MPLS TE path-option explicit name feature allows an MPLS TE tunnel to use a named explicit path configured separately from the tunnel. A named explicit path is a reusable path definition that can be applied to multiple tunnels. It provides a way to define explicit paths independently of tunnel configurations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-XAUI_1_FRAG_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported fragmentation error on TX side on bridge instance - 3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_PUBLISHER-3-TIMEOUT
### Response:
(Severity: 3), (Category: INSTALL), (Description: There was a problem processing the notification of a change to the selected version for one or more communication protocols.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-ERR_READ_PUNT_REASON_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 NetIO component was unable to read the Packet Punt Reason supplied by the Hardware forwarding component. The Packet was dropped.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKIMIB-3-TRAP_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failure could be registering for trap enable/disable callbacks or creating lwm channel.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFI_EA-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: The SFI EA process failed to initialize a critical component. The process cannot proceed and will restart to recover.), (Recommended Action: The process should recover automatically and no further action is required. If problem persists, it is suggested to collect 'show tech-support infra/sfi' and 'show running-configuration' and contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP session protection feature?
### Response:
The MPLS LDP session protection feature provides a means to protect an LDP session between directly connected neighbors in the event of an interface failure. It uses a targeted hello adjacency as a backup to maintain the session. It is enabled with the mpls ldp session protection command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLU-4-TBM_HW_INIT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A particular table failed to initialise. This is typically due to incorrect parameters supplied when initialising the table. Any traffic on that table is impacted.), (Recommended Action: Please collect the following output on the affected node. - show logging - show tbm trace error/event/all - show asic-errors pse <> all location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-NOMEMORY
### Response:
(Severity: 3), (Category: INSTALL), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth max and min feature?
### Response:
The MPLS TE auto-bandwidth max and min feature specifies the maximum and minimum bandwidth values that auto-bandwidth can request for a tunnel. The max value limits how high auto-bandwidth can adjust the tunnel bandwidth, while the min value specifies the lowest bandwidth auto-bandwidth can request. These values constrain the auto-bandwidth adjustments.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-TUNNEL_OVER_TUNNEL_UNSUPPORTED
### Response:
(Severity: 4), (Category: ROUTING), (Description: --), (Recommended Action: Change configuration/topology to avoid this.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-REPLY_ERR
### Response:
(Severity: 3), (Category: SYSDB), (Description: Sending error reply to client.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-FAILED_TO_CALCULATE_MD5
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Either the path is invalid, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-WRITE_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Most probably some problem with the file system), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install verify packages command in IOS XR?
### Response:
The 'install verify packages' command is used to verify the consistency and integrity of the currently active software packages on the router. It checks for any missing or corrupted files and reports any issues found.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-INVALID_NOTIF_INFO
### Response:
(Severity: 4), (Category: INSTALL), (Description: The Install Helper failed to extract the notification information.), (Recommended Action: Install helper failed to obtain a local directory name. This error will be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_TERM_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The term of the upgrade license has expired.), (Recommended Action: The customer should reserve a valid license.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_BAG_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-EVENT_BLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_block() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-3-IDT_FAILED
### Response:
(Severity: 3), (Category: HA), (Description: An error occurred during checkpoint Initial Data Transfer which resulted in its failure. A retry of IDT will happen automatically.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_BMADJ-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM BMADJ, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_SNOOP_FRETTA-6-ERR_EXCEED_MAXIMUM_OLE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The route (S,G) has hit the maximum number of OLEs local to this LC. No more OLEs beyone maximum support number will be hardware programmed. clear pim topology <S, G>), (Recommended Action: No action is required. Platform software will not program OLEs beyond scale)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-TIMER_PROBLEM
### Response:
(Severity: 3), (Category: OS), (Description: Problem with timer events. This will impact dumper functionality as the dumper configuration syncronization relies on timers.), (Recommended Action: Please restart process dumper. If the issue is seen even after process restart then, Collect the following data and raise DDTS. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PMLIB_CLIENT-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: svc pmlib client encountered an provisioning warning.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC_CTRL-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in DSC-CTRL process.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If it is still non-operational, restart the driver by executing the following command at the CLI of the active RP: 'process restart dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A software programming error has occurred which driver cannot recover), (Recommended Action: Check the trackback and make sure the access is correct.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-CERR_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during the registration of OSPF error codes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-0-SVC_EMERG
### Response:
(Severity: 0), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-INVALID_IFNAME
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The interface name does not correspond to a valid XR interface.), (Recommended Action: Check the XR interface names in the XR_INTERFACES environment variable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
8000-1-RESTART_NOT_SUPPORTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message in the DPA module to indicate that a process that doesn't support restart has been restarted (crash, CLI or SMU installation) Process will trigger node reload to recover after collecting required information in the linecard's disk), (Recommended Action: Please collect the core file and DPA traces from linecard's disk Ignore this if process was operationally restarted like process restart command or process restart SMU installation those operations are not supported yet and nothing to debug at this point)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-PARTIAL_CHASSIS_SHUTDOWN_POWERUP
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Received message from environment monitor that the voltage is low on the power shelves. So we are shutting down linecards and fabric cards to prevent damage to these boards.), (Recommended Action: Examine chassis and replace battery or power-shelf.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-EDM_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured with a show client communicating with the msdp. show server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show context<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show context<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. from the node obtained from the above command, run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sysdb trace edm <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sysdb trace edm <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'route-policy' command in IOS XR L3VPN configuration?
### Response:
The 'route-policy' command is used to define routing policies for importing and exporting routes between VRFs and the global routing table. It allows you to filter and manipulate routes based on various criteria such as prefix, community, and AS path. Route policies provide flexibility in controlling the exchange of routing information in an L3VPN.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIB-3-SYSDB_ACCESS
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble reading from or writing to or binding/unbinding SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SM-3-CALLBACK
### Response:
(Severity: 3), (Category: INSTALL), (Description: This self-managing component reached an unexpected state, and was unable to proceed with the requested operation.), (Recommended Action: Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-LEVM_DISABLE_FD
### Response:
(Severity: 4), (Category: OS), (Description: EVM received an error from LEVM when disabling fd), (Recommended Action: This is an internal error and should be reported to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-REG_CALLBACK_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'AIB Callback registration failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP route damping for MPLS L3VPN?
### Response:
To configure BGP route damping for MPLS L3VPN, use the 'dampening' command in BGP VPNv4 configuration mode. router bgp 65000
address-family vpnv4 unicast
vrf MyVRF
dampening
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_8_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-7-DEBUG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-CONVERGE_VERSION_MISMATCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: A client updated the RIB for convergence but not with the latest version as known by RIB. This will have delayed or prevented the convergence of the routing table, and hence the purging of any stale routes from the forwarding table.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_FT_OIR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when any FT is OIR'ed from satellite.), (Recommended Action: Please reinsert the FT back in the satellite.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-EVENTLIST
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-SERVICE_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FGID driver failed service initialzation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-2-CRIT_INT_MCH_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A critical error has occurred in the MCH (Memory Controller Hub) of the Linecard's CPU complex. The message will display the name, description, and error log. These errors will cause a card reload. If it is a software error and persists or if it's a hardware error, please contact support.), (Recommended Action: If it is a software error and persists or if it's a hardware error, please contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-ERR_GENERAL_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Parser encountered error, see message for more details'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_NETIO-3-MEMORY
### Response:
(Severity: 3), (Category: L2), (Description: The DLL has failed to acquire the required amount of memory. There might be some other process consuming more memory which creates memory shortage for this.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the OPTICS driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_REPROGRAM_POLICERS
### Response:
(Severity: 7), (Category: OS), (Description: It failed to reprogram a flow policer when it had received a request to reprogram all flow policers to HW.), (Recommended Action: When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_P2MP_DEST_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the P2MP auto-tunnel destination aborted since it would have exhausted the tunnel destination scale limit), (Recommended Action: Reduce the P2MP configured/auto tunnels to below the system scale limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-VSA_FORMAT_ERR1
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA format error in daemon user config.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR handle configuration failures during router startup?
### Response:
During router startup, if there are configuration failures, IOS XR boots with the last known good configuration instead of the latest changes. This ensures that the system comes up in a consistent state even if recent configuration changes caused issues.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-TRAPSEND
### Response:
(Severity: 3), (Category: SNMP), (Description: A trap destined for the given address could not be sent. This could be due to a low memory condition. It also might be due to the fact that there is no SNMP transport process(udp process) running for that transport protocol.), (Recommended Action: Check the running processes to ensure that an udp process is running. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-NULLARG
### Response:
(Severity: 3), (Category: OS), (Description: A NULL pointer was passed as a fn parameter), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_7_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-CRIT_EXIT
### Response:
(Severity: 2), (Category: L2), (Description: An critical error occurred in NPU Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-XCVR_FAULT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-FAILED_TO_CREATE_SKEYID
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to generate SKEYID.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-BAD_ALIGNMENT
### Response:
(Severity: 7), (Category: HA), (Description: A heap index was not word aligned.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-2-DATA_QUEUE_FULL
### Response:
(Severity: 2), (Category: ROUTING), (Description: The IGP-TE inter-process message queue is full and further messages cannot be accepted. This may impact TE functionality if the condition persists.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-6-IPACCESSLOGDP
### Response:
(Severity: 6), (Category: ACL), (Description: Packet matching the log criteria for the given access list was detected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ERR_FILE_ATTACH
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when bgp try to do event file attach.), (Recommended Action: In most cases the problem will recover by resetting the neighbor for which file attach is failing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-ASYNC_SOCKETS_DISALLOWED
### Response:
(Severity: 3), (Category: IP), (Description: The socket library has disallowed creation of a new socket. The system is likely undergoing churn or is throttled, so that new sockets are no longer being allowed. Once the system gets back to stability, socket creation will be allowed.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-XSVF_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: ASIC scan server xsvf execution encountered an error condition, this is because of illegal command), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_FWD-3-BAG_REG_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some error occured while trying to register edm bags. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-6-INFO_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is a informational message in the PSE Driver to indicate an operation.), (Recommended Action: No action is required. Collect the error message and required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-RIB_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error has occurred during communication with the RIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show rib trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show rib trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN-3-UNKNOWN_ASIC_ID
### Response:
(Severity: 3), (Category: L2), (Description: The ASIC Id is not valid and the process will abort), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-MCASTJOIN
### Response:
(Severity: 3), (Category: IP), (Description: Failed to join a multicast group on the interface.), (Recommended Action: Restart the dhcpv6d process Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-3-IFH_BW_UPDATE_RATE
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS MA process encountered the specified error while trying to update it's database with the new bandwidth update from ANCP or Ifmgr.), (Recommended Action: Contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_V6FIB_RP-3-ERR_INFO_VERBOSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error information during improper updation of variables or incorrect return stated in IPV6 FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-6-IPACCESSLOGP
### Response:
(Severity: 6), (Category: ACL), (Description: A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option and matches with the IP protocol type TCP (or) UDP (or) SCTP. This message is seen for the first match and for each match after the hit count is greater than 0x7FFFFFFF(2147483647).), (Recommended Action: This is information only message, no action required No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CORRUPT_ARG
### Response:
(Severity: 7), (Category: INSTALL), (Description: Value of a parameter passed to function appears to be corrupt. The current request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_MBE_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 channel FIFO multi-bit error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-1-FLAGS
### Response:
(Severity: 1), (Category: OS), (Description: An Event Manager call was made with an invalid flag argument.), (Recommended Action: This is an internal error and should be reported to TAC. The application process making the call has corrupted data or some other internal error. The application should be restarted; if that fails, the router should be rebooted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY_LIB-3-NOMEM
### Response:
(Severity: 3), (Category: OS), (Description: No memory to perform bag operations.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_9_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_6_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-READERINIT
### Response:
(Severity: 7), (Category: MGBL), (Description: An error occurred while preparing to read instructions from the command line.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-TOO_LONG_NAME
### Response:
(Severity: 7), (Category: OS), (Description: Too long name is specified), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is pseudowire redundancy and how is it configured in Cisco IOS XR?
### Response:
Pseudowire redundancy provides the ability to configure backup pseudowires for VPWS services to protect against failures of the primary pseudowire or the remote PE router. It is configured using the 'backup' command under the 'p2p' configuration mode. The 'neighbor' command is used to specify the backup PE router and the 'pw-class' command is used to specify the backup pseudowire attributes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-CARD_BOOT_TIMEOUT_FAULT
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card is reporting boot timeout has expired. This is a fatal failure condition that might point to HW problem. CCC driver state machine will try to recover from the failure by reloading the card.), (Recommended Action: If CCC driver power-off the card because the problem persist after all the recovery reloads have failed, then contact with Cisco support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-7-HBLOSS_COLLECTION_IGNORED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The current request to collect heatbeat loss log is being ignored because of another instance of heatbeat loss log collection that is still in progress.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BAG_SCHEMA-4-ERR_DEBUG
### Response:
(Severity: 4), (Category: INFRA), (Description: Bag Schema Server encountered an error using the debug service. The error message describes what operation has failed and why it failed. The error could be caused by low memory resource or programming error.), (Recommended Action: In many cases, Bag Schema Server will recover by itself. If it does not then restarting the process may help. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_CLIENT-3-SHM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: EDRM shared memory context init error), (Recommended Action: Process will exit due to shm memory init error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_4_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_TMF_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised possibly due to incorrect internal BITS transmitter configuration.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-CBC_OFFLINE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The node CAN Bus Controller is currently offline. Operations such as environmental monitoring, hardware power control and card reset may be impaired.), (Recommended Action: 1- Issue the following process restart commands in sequence and then see if the error message goes away and 'show platform' CLI indicates a valid card type: <CmdBold>process restart can-server location <active RSP><NoCmdBold> <CmdBold>process restart shelfmgr location <active RSP><NoCmdBold> 2- If the issue is not yet resolved, please reseat the affected card carefully, making sure it is fully inserted into the backplane. Try different slots in the chassis if needed. See if the error goes away and if the card boots up and reaches the XR RUN state. 3- If the error persists, please contact your Cisco technical support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-AGENT_ALREADY_REGISTER
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing has already registered with Cisco, use the force option to register again.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-2-SW_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Slice Mgr Proxy process detected a fault in the hardware, or software on the LC.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: an external API has failed in Shelf Manager. The details are supplied with the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-3-IDT_FAIL
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The replicator has repeatedly failed to complete IDT for a system data handle. There may be problems with communications or other low-level infrastructure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-BATCH_CONFIG_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: Some configurations can not be handled correctly because: - invalid configuration - configuration can not be accepted at this moment), (Recommended Action: Use 'show configuration failed' to see all the failed configurations.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NEGCOUNTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: The counter value for accepted prefixes is wrong and less than zero), (Recommended Action: The counter can be corrected by resetting the session. However, the only behavior affected by an incorrect counter is enforcement of the 'max-prefix' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPCD-3-INIT
### Response:
(Severity: 3), (Category: IP), (Description: A failure occurred during the initialization of the process. This may have resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-SUBMODE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to parser_submode_find failed to find submode. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is an SMU in the context of IOS XR?
### Response:
SMU stands for 'Software Maintenance Upgrade'. It is a software patch delivery mechanism that provides a point fix for a critical issue in a specific IOS XR software release. SMUs are release-specific and can be installed and activated to address critical bugs without performing a full image upgrade.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-4-ERR_CHKPT_CORRUPT
### Response:
(Severity: 4), (Category: L2), (Description: Whilst restoring one of its checkpoint tables MFR MA found a corrupt checkpoint entry. The entry will be ignored and so the relevant interface's MFR session will be renegotiated after the restart and as a result there may be a short period where traffic is lost.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_INVALID_MACRO
### Response:
(Severity: 3), (Category: FABRIC), (Description: Unexpected macro type value read from ASIC. There could be a h/w or FPGA issue.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-CONFIGURATION_SYNC
### Response:
(Severity: 3), (Category: SYSDB), (Description: Sysdb detected possible configuration inconsistency and successfully cleared it.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_COFO_LB-4-ERR_INT
### Response:
(Severity: 4), (Category: L2), (Description: An internal software error occurred in the collapsed bundle dll.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-BAD_HEAPPTR
### Response:
(Severity: 7), (Category: HA), (Description: Internally heap pointers are kept as offset indices. A given heap pointer was found to be outside the heap.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REPLACE_COMMIT_NOT_COMMITTING
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install commit as part of the replace operation is not attempted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_INVALID_10M_CLOCK_SYNC_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The 10MHz UTC clock signal has been invalidated possibly due to loss-of-signal condition, offset out of range or phase lock issue.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Ensure valid 10MHz clock is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-ISSU_NODE_BOOT_NOT_ALLOWED
### Response:
(Severity: 4), (Category: INSTALL), (Description: Node rebooted while ISSU install operation is in progress, it will not be allowed to come up until the operation completes.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-ATTACHPOINT_MISMATCH
### Response:
(Severity: 7), (Category: ROUTING), (Description: The policy_repository process was not able to extract the policy name OR id value for this attach point path. This means that the policies that are actually using this attach point will NOT be recorded and thus policies *could* be deleted while still in use.), (Recommended Action: Restart the policy_repository and check for re-occurence of issue Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Information during improper updation of variables or incorrect return state in MPLS FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-2-IMA_BLOCK_SIGN_VALIDATION_FAILED
### Response:
(Severity: 2), (Category: MGBL), (Description: A failure occurred during Runtime integrity validation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-ERR_VRFN_FNS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospfv3_uv process was unable to initialize SysDB callbacks.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL_GRE_EA-3-DELETE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the platform specific code software to indicate anomolies while initializing GRE Feature. This error is most likely caused by a temporary situation within the feature code. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-CCC_THREAD_INIT_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: An attempt to initialize a connection to the CCC driver failed. This is a fatal fault since ESD would not be able to interact with CCC driver. ESD process will restart after this fatal error.), (Recommended Action: If this problem does not recur, no intervention is required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ICMP-7-EVM_CREATE_FAILURE
### Response:
(Severity: 7), (Category: IP), (Description: The IP ICMP library could not create the event manager to handle the events to be received by the process. This can happen when the process is (re)starting. If the error message doesn't persist, it can be ignored. If the error message persists, some basic icmp functionality may not be available.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action.If does not recover contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-PHASE2_PROPOSAL_NOT_CHOSEN
### Response:
(Severity: 3), (Category: SECURITY), (Description: Phase-II parameters negotiation failed with peer.), (Recommended Action: 'Contact the remote peer's administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: There is insufficient memory for the policer configuration. All flows will be assigned default characteristics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-7-MSG_SEND_FAILED
### Response:
(Severity: 7), (Category: HA), (Description: Redcon attempted to call msg_send but it failed.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-3-PTCL_LIST_NOT_NULL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A packet header on the free list had a non-NULL particle list.), (Recommended Action: Please collect a core dump of the packet client that emitted the message, or whose pid matches that in the error message with 'exception pakmem on' configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-5-NOTICE
### Response:
(Severity: 5), (Category: OS), (Description: A normal but significant event has occurred.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-FAB_EVM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Fabric server EVM creation failed. Packet path initialization at RP errored.), (Recommended Action: Restart the spio_ma process. 'process restart spio_ma location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-5-TCAM_MISMATCH_REPAIRED
### Response:
(Severity: 5), (Category: L2), (Description: This message indicates the completion of the automatic correction following the detection of a mismatch between the LC CPU software view of TCAM content, and what was actually found in hardware. It also marks the start of troubleshooting data collection, the end of which will be indicated by a further 'TCAM_MISMATCH_COMPLETED' log message.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-EVM_CREATE_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to create event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_CFGMGR_ADDDIFFS
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-0-FATAL_INTERRUPT_ERROR
### Response:
(Severity: 0), (Category: FABRIC), (Description: FIA fatal error interrupt on FIA), (Recommended Action: If the same error ocurrs again after reload or reset, report the exact error message for further investigation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-CANNOT_PERFORM_FAILOVER
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that on receving reddrv hbloss from more than half of the cards present in the chassis, a failover is attempted. It got failed as the standby is not ready.), (Recommended Action: Perform a manual switchover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-COLLISION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Network Processor has detected a memory collision.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC-2-L2
### Response:
(Severity: 2), (Category: SERVICES), (Description: Log level in sbc app is set to higher than nbb_console_unconditional_log_level. Use errmsg facilty to print error message), (Recommended Action: collect ips and pd trace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-3-NO_SERIAL_NUM
### Response:
(Severity: 3), (Category: LICENSE), (Description: The license manager encountered an error while attempting to read the chassis serial number. Without a valid chassis serial number the license manager will not be able to support licenses locked to the affected chassis. Check the error string to determine what has happened.), (Recommended Action: Please restart the licmgr process command 'admin process restart licmgr'. Another option is reloading the RP card by command 'admin reload'. If the error log message is reoccuring , please collect informaiton using the commands 'show tech-support license ','show license trace platform' and contact your tech support representative and provide them the collected information and exact message as displayed on screen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ADR_CONSUME
### Response:
(Severity: 3), (Category: OS), (Description: Unable to consume requests from ADR.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-FAB1_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected fabric parity from RP/RSP.), (Recommended Action: If all other LCs also report this parity error alongwith peer RP/RSP, then check for any bent pins on the RP/RSP for which the problem is reported. Reload the RP/RSP that has the problem. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISK_DRIVER-3-FAILED_TO_ALLOCATE_TIMER_ID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ATA device might report these errors when it unable to allocate event timer id.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-6-MSG_INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: Informational message.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-2-HAL_INIT_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Switch HAL initialization failed and process will respawn by its own to recover from this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VI_REPL-7-INIT
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: A failure occurred during the initialization of the Virtual Interface Config Replicator process.), (Recommended Action: The vi_config_replicator process will restart and attempt to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSI_EA-3-PLATFORM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an informational message in the CSI EA to indicate that an error was seen when calling platform functions), (Recommended Action: Please collect the trace,)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPPHA-3-FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: A CPP HA failure has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IPV4_ADDRESS_SCAN
### Response:
(Severity: 3), (Category: L2), (Description: A scan of the IPv4 addresses on this interface has failed. This means that IPv4 address information for this interface will not be included in outgoing CDP packets. The neighboring device will not see the IPv4 address information for this interface.), (Recommended Action: Restarting CDP as the address consumer, or the ipv4_ma as the address provider on this node may rectify the problem. proc restart cdp location <location of failure> or proc restart ipv4_ma location <location of failure>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-VRF_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when creating the vrf context for the shown VRF name. As a result VRF can't be enabled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-INCONSISTENT_REMOTE_MTU
### Response:
(Severity: 3), (Category: L2), (Description: Two remote endpoints of EVPN-VPWS service have signalled inconsistent MTU values. The service cannot be brought up until all MTUs match.), (Recommended Action: Perform network level review, and ensure the correct MTUs are being used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-3-VRF_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the RAW process attempts to set up connection with the RSI agent during the startup of raw process.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LB_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PHY controller driver version is not compatible with the hardware version.), (Recommended Action: Upgrade the PHY controller CPLD image followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMORB_XMLAGENT-6-TCP_RESTART
### Response:
(Severity: 6), (Category: MGBL), (Description: The tcp process is probably restarted which is caught in TCP_Monitor), (Recommended Action: just information message, no action is required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show rsvp session' command in IOS XR?
### Response:
The 'show rsvp session' command is used to display information about RSVP sessions. It shows the session type (LSP or reservation), the destination, the tunnel ID, the RSVP reservation style, and the bandwidth reserved. This command is useful for verifying the RSVP sessions established by MPLS TE.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_RESYNC_ASSERT
### Response:
(Severity: 3), (Category: FABRIC), (Description: During the deferral window, fsdb_server didnt hear from a driver or rack due to some connection/transport issue. Restarting fsdb_server will try to recover it.), (Recommended Action: This clearly indicates an underlying transport issue. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_ATOM-6-LTRACE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB ATOM component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-2-CRITICAL
### Response:
(Severity: 2), (Category: OS), (Description: Critical conditions are present. Possible resource shortage or coding error.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-ROUTE_RECONCILIATION_FIB_EOD_RECEIVED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: System is booting in warm mode and is resynchronizing routes with the ASIC. FIB EOD is intermediate step in route reconciliation.), (Recommended Action: No recovery is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-RX_LINK_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter detected RX Link error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-LTRACE_INIT
### Response:
(Severity: 7), (Category: SYSDB), (Description: The ltrace buffer could not be initialised), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-4-FABRIC_BANDWIDTH_LOW_THRESHOLD
### Response:
(Severity: 4), (Category: FABRIC), (Description: When the available fabric BW goes below the required BW that corresponds to the low threshold, then the front panel ports of the LC go down.), (Recommended Action: 1. Make sure you have enough FCs in your system. 2. Check the BW threshold. 3. Make sure your planes are UP and running)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-MAG_NOT_AUTHORIZED_FOR_PROXY_REG
### Response:
(Severity: 3), (Category: IP), (Description: PBU is received from a MAG which is not configured as a peer on the LMA or dynamic MAG learning is not configured on the LMA.), (Recommended Action: Either configure the peer MAG on the LMA or enable dynamic MAG learning. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-FANTRAY_RPM_CLEAR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: All fans on indicated fan tray operating at the set RPM.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_MIB-3-INIT_ERR
### Response:
(Severity: 3), (Category: SNMP), (Description: First %s : Error Description Second %s : Return code string An error occurred while initializing ATM MIB support in snmpd process. If this occurred during process startup, then the process may be restarted. The error could be a part of one/more of the following: - database initialization - ifmib notify registration - sysdb binding process - registration for a trap - initialization of a trap OID string), (Recommended Action: If the problem re-occurs, collect required information and logs. If this is observed during startup, then corresponding process may be restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VI_REPL-3-REPLICATE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during the replication of an item of virtual interface configuration to one or more of the backup RPs.), (Recommended Action: The process will restart and attempt to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-STARTUP_FILE_DIR_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to open the startup configration file for the following reason: - CONFIG_FILE is set to a directory.), (Recommended Action: CONFIG_FILE should be set to a valid startup configuration file.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC_LIB-6-LTRACE_INIT_FAIL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message that ltrace initialization has failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMON-0-RSP_HEADLESS_ACT_RSP_HB_REQ_FAILURE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This RSP has timed out waiting for Heartbeat requests from the active RSP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SERVICE_EA-3-ERR_CLIENT
### Response:
(Severity: 3), (Category: OS), (Description: service-application IPSec is unsupported on this variant of LC. If this LC forwards traffic to a service-application IPSec enabled interface then traffic will get forwarded in cleartext or packets may get dropped.), (Recommended Action: Replace the LC if you want it to support service traffic. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AVPAIR-6-ADD_FAIL
### Response:
(Severity: 6), (Category: OS), (Description: avpair_add failed while unpacking the Posix message into avlist), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-3-DELETE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error. Deleting an entry from ingress or egress failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_CORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory correctable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-CONFIG_CONFLICT
### Response:
(Severity: 4), (Category: L2), (Description: A configuration conflict has been detected: Interface %s already used ' ' by MCLAG feature. ICCP-SM will not work until the conflict is resolved.), (Recommended Action: For MCLAG to work for this interface, one must delete relevant configurations for both ICCP-SM and MCLAG. Then re-configure ICCP-SM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-LNS_CCDF_OVERFLOW_ERROR
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq LNS control cell fifo overflow.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-LINK_BAD_THREAD_INUM
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-FATAL_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: NPUXBAR bridge has a fatal error.), (Recommended Action: Reboot the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSPI_OUTOF_FRAME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TxSPI out of frame error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-INITIALISATION_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: The process will automatically exit and will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-PROTOCOL
### Response:
(Severity: 7), (Category: SYSDB), (Description: There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB server.), (Recommended Action: Upgrade all nodes to have the same version of SysDB installed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HOSTNAME_SYNC-3-SYNC_ETC_HOSTS_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Failed to update /etc/hosts file with the new hostname), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_INTF-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during initialization with a necessary service for the process. The process is unable to run.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-CNET_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Cnet writing data into ethernet ok. %s- The data written into ethernet.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-4-RETRY_ALARM
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: It has been detected that the configuration or install operation sent to the Satellite could not be enacted for an extended period of time, even following retries.), (Recommended Action: Run 'show nv satellite error-retries satellite <sat id>' to display the configuration or operations that could not be enacted and the reasons why. <sat_id> should be in the range 100-65534 and is specified in the message. The user may need to correct the configuration or command used for the operation to address the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-LOSS_OF_SYNC_FIA00
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on interlaken interface on egress mux and fia 0), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-OPTICS_NOT_RX_PWR_DOM_CAPABLE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Opticas is not DOM capable for RX power. So RX_OPD alarm will not be set for Rx Power < OPD threshold.), (Recommended Action: Try replacing with the DOM capable optics - show tech-support ethernet interface location <> - show controller <> phy - show controller <> internal)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_SCH_LIB-2-GET_NODEID_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message signifies that the DLL can not longer receive any event messages from the platform process in the router.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_SIM-4-BAD_NVRAM_MAP
### Response:
(Severity: 4), (Category: MEDIA), (Description: Mapping of Nvram Failed), (Recommended Action: 'Check for 2MB size NVRAM')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_SWITCH
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface has changed operational state.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status switch' \ interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-NOTIFY_LOCK_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: An expected database lock was not held. This could indicate a memory corruption problem.), (Recommended Action: Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-RWLOCK_DESTROY
### Response:
(Severity: 3), (Category: OS), (Description: Failed to destroy read write lock.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the spf-interval command in IS-IS?
### Response:
The spf-interval command is used to configure the minimum interval between consecutive SPF calculations. By default, the SPF interval is 5 seconds. Increasing this interval reduces the CPU load on the router but increases the convergence time after a topology change. The trade-off between CPU utilization and convergence time should be considered.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-ERR_RESTART
### Response:
(Severity: 3), (Category: L2), (Description: There is an error detected during SPA process restart. During the process restart, the software will do: checking the hardware config compatibility; re-creating SONET controller and POS interface; restoring configurations. Any failure in above will cause restart failed. The traffic may or may not be affected after restart failed, but the further operation on SPA, e.g. changing configuration, may not be carried out properly. %s - error message indicating location and the reason of the error), (Recommended Action: The system will try to restart the process again for a few times, If the issue persists, reload the SPA with the command: hw-module subslot 0/x/x reload If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPI-3-ATTR_NOTIFY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Packet Infrastructure (EPI) library was unable to notify a client of a change to some interface attributes because it was unable to allocate memory. This may result in the client of the EPI library attempting to send packets with incorrect tag or encapsulation information.), (Recommended Action: This message will be seen as a result of a configuration change if the system is low on memory. Attempt to free up some memory and reapply the configuration change that caused this message to be displayed. If the problem persists, try restarting the process using this library. If this does not help, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-ENET_INIT_DEVICE_DATA_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This is during the device Initialization. Data structure intialization has failed %s- Error description), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-NODEID_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: Unable to perform SysDB health check since the process is not able to retrieve its node id.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_DB-3-KERNEL_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: A system library call failed unexpectedly. This failure can occur due to any of the following failures. 1. Failure while obtaining DB read lock 2. Failure while obtaining DB write lock 3. Failure while releasing DB read/write lock 4. Failure while obtaining TTY lock 5. Failure while releasing TTY lock), (Recommended Action: Please get the information specified under the component required_info and call your Cisco technical support representative and provide the gathered information with this error message text. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CHKSUM_ERR_1_FIA_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checksum error - 1 from FIA on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-DEBUG_STAT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-MPLS_BGP_LU_KEY_ERROR
### Response:
(Severity: 2), (Category: ROUTING), (Description: In bgplu label create, key conflict occurred), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-FIND_VIRT_INST_ENTRY
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service with the ID named could not be located in the Virt-manager DB.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB-3-SHM_OPEN_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to open the FADB shared memory), (Recommended Action: Search the event logs for events/errors related to the failure reason. Shared Memory Management and disk access is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-4-PM_ASLEEP
### Response:
(Severity: 4), (Category: LIBRARY), (Description: The power module is asleep.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SEQ_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected sequence error on some bus, this could be software error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-ERR_THREAD_COND_SIGNAL
### Response:
(Severity: 4), (Category: FABRIC), (Description: FSDB encountered an error while attempting to signal a thread conditionally. The operation related to the resource will be affected and the process will continue to run normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-LTRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: IP), (Description: There was a failure during an ltrace_init api call which resulted in the failure as indicated in the message text.), (Recommended Action: None of the traces can be saved in this case. If tracing is very much important to be collected then restarting of ipv6_io may fix this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_MQ_PKT_LEN_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 0 MQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-3-DISABLED_DANGLING_BAD_ACTORS
### Response:
(Severity: 3), (Category: OS), (Description: The LPTS Excessive Punt Flow Trap (EPFT) feature was disabled by configuration, but not all existing interfaces which are using more hardware resource (i.e Bad Actors) on this node were cleared. This may affect the creation of new sessions or sub-interfaces. When a flow through any interface is trapped, it is tagged as a Bad Actor and will be added to 'penalty box', this box will restrict the traffic through that interface by applying penalty policing.), (Recommended Action: Try clearing Bad Actors manually, or reloading the line card. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-EXIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to notify the system manager that it was exiting. In very rare cases, this could result in the process not being restarted when it ought to be.), (Recommended Action: If the process in not running and it ought to be (ie, there is CFM configuration remaining), then remove all CFM configuration, commit this change, then re-apply the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-SM_DRIVER_CONNECT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error. Frequency synchronization on this line card is disabled.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-MAINT_IMG_LOAD_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-6-SWITCH_INFO
### Response:
(Severity: 6), (Category: L2), (Description: Debug messages for APS.), (Recommended Action: No Action requirements.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATSD-3-SHMEM_LOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred when attempting to acquire a shared memory lock), (Recommended Action: This message probably indicates an error elsewhere in the system as some other process must be holding the lock. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-0-GRACEFUL_CARD_RESET_TIMED_OUT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The Grace Card Shutdown/Reset request with the sysmgr timed out. Attempts to perform a non-grace node reboot instead.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_25
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVALIDDETAILS
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The offset to the token details structure is bogus'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-SR_CFG_CHANGED
### Response:
(Severity: 2), (Category: ROUTING), (Description: BGP will be notified of any change in the SRLB/SRGB range config. When BGP programs the SR labels into LSD, it derives those labels based on SRLB range start and indivisual SR index. All these SR labels have to recalculated based on new range and reprogrammed into LSD. In case the SRLB/SRGB range is changed, Please restart BGP to re-program the labels.), (Recommended Action: Restart BGP process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-1-ERR_HW_ERR_DISABLE_INTERRUPT
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error reached threshold on the Datapath FPGA. Software will take action as described in the error message to try to recover from the error. Take the recommended user action as it is described in the error message. Device: %s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error. Recommended user action: %s - description of the recommended user action.), (Recommended Action: If the message recurs, diagnostics should be executed on the PLIM and MSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COPP_SAMPLER-7-INIT_ERR
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The CoPP Sampler Plugin encountered a fatal error during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
c2c_iif-3-ERR_HW_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hardware initialization failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-OBJECT_REBUILD_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: The system was atempting to rebuild an object and it failed.), (Recommended Action: Look for out of resource conditions. The policy_repository will exit and restart. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSCMIB-4-SYSDB_ACCESS
### Response:
(Severity: 4), (Category: SNMP), (Description: The MIB was unable to read to or write from the system database, so will be unable to provide some requested MIB data.), (Recommended Action: The communications infrastructure may not be up yet. The operation will automatically be retried and recovered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCENET-3-IO_PRIV
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The ethernet driver is unable to get the necessary privileges to perform an operation vital to its functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of IS-IS route summarization and where is it configured?
### Response:
Route summarization reduces the size of the link-state database and hides instabilities. It is configured on L1/L2 border routers to summarize L1 routes before advertising them into L2. The command is ""summary-address"" in IOS and ""summary-prefix"" in IOS-XR.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-2-ERR_NO_MEMORY
### Response:
(Severity: 2), (Category: SECURITY), (Description: A memory allocation failure has occurred from which the process cannot automatically recover.), (Recommended Action: 'The process must be restarted to ensure correct operation. If memory is repeatedly exhausted upgrade to a larger memory configuration.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-CONF_CONNECT
### Response:
(Severity: 6), (Category: MGMT), (Description: This comes when connection to configuration database returns error (this could be temporary as configuration database is down), retrying login would gives success once configuration database comes up), (Recommended Action: Wait for configuration database to come up, and retrying login, check configuration database is running or not, using show confd_helper location <location>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_FGID_ACCESS
### Response:
(Severity: 3), (Category: FABRIC), (Description: One or more ASICs for the stage on the fabric card are being reset. Hence this multicast FGID access operation for the specified stage is aborted. This may be seen on any SM node going down, during asic reset cleanup process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-4-PM_AWAKE
### Response:
(Severity: 4), (Category: LIBRARY), (Description: The power module is awake.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-XFP_NPOWER
### Response:
(Severity: 4), (Category: L2), (Description: The XFP device lost its power OK state causing the link to flap. A reset of the XFP device corrected the issue.), (Recommended Action: None. Software corrected the issue by power cycling the XFP device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Errors occuring during initialisation of IPV6 FIB platform.), (Recommended Action: Please collect the required logs. Also notice if the error message is transient or persistent. If errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-I2C_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: I2C Failure/Success while accessing device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_GROUP_CREATE
### Response:
(Severity: 4), (Category: L2), (Description: Creation of the group used to communicate between Bundle Manager processes failed. This resulted in the restart of the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show gsp groups<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show gsp groups<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: IP), (Description: The Telnet Server has encountered an error using the SysDB Library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFI_MA-3-INIT_ERR
### Response:
(Severity: 3), (Category: L3), (Description: An unrecoverable error has happened while initializing SFI MA process. sfi_ma will be restarted automatically. SFI interfaces may get created later.), (Recommended Action: The process should recover automatically. It is suggested to collect 'show tech-support infra sfi' and to call Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN MA process failed to initialize. Previous messages may give the reason. The process will automatically restart and retry. Until it succeeds, VLAN functionality may not work on the affected node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTT0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-PKG
### Response:
(Severity: 6), (Category: MGBL), (Description: Some configuration was removed for this software activation /deactivation operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV6_EA-3-CRITICAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE IP-EA, Critical error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-TX_ALARM_TMF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised possibly due to incorrect internal BITS transmitter configuration.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP Tx power less than or equal to the low Tx power warning threshold. The XFP is the pluggable optics on the line cards. The Tx power threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Replace the XFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-ERR_SYSDB_ITEM_GET
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to get the item from sysdb. The error is displyed in the error message.'), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) Console logs b) show tech-support parser c) show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-MBI_COPY_FAIL
### Response:
(Severity: 4), (Category: INSTALL), (Description: DRP MBI copying failed. This card will not be able to boot.), (Recommended Action: Cleanup will be automatically attempted. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_STU
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from STU.), (Recommended Action: Clear the SSM-STU condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWTECH-0-EMERG
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-6-IOFPGA_EXT_ALARM
### Response:
(Severity: 6), (Category: DRIVER), (Description: Card manager has received an interrupt from IOFPGA board and this interrupt is suggesting to close the chassis ext alarm), (Recommended Action: This is an indication about the chassis ext alarm)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-RAW_PART_ATTR_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to initialize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_FPD-3-ACCESS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in accessing the FPD and may not be able to either program new firmware or get device information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFMMIB-3-NO_TIMER
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered in the initialisation of the DOT1AG and MEF SOAM PM MIBs. The error message contains details about the source of the error.), (Recommended Action: Tables in the DOT1AG/MEF SOAM PM MIB will not be accessible. Restart the mibd_interface process in an attempt to clear the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_TX_FIFO_OFLOW_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported tx fifo overflow on bridge instance - 3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-CREATE_CHANNEL
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to create a channel so that other processes can send event messages to it. The error is normally seen when initializing DNS process), (Recommended Action: The error should go away with process restart domain_services loc all. If the error persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-MB_POWERUP_CHECK_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The voltage validation and power status check for the card failed. This might be a power issue to the card or a faulty card.), (Recommended Action: Try reloading the card or physical OIR, verify power to chassis and the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-7-BSD_DEBUG_MSG
### Response:
(Severity: 7), (Category: IP), (Description: Displays the debug msgs as they happen), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_MEM_DIGEST
### Response:
(Severity: 4), (Category: SECURITY), (Description: SAM found MEM digest compare not successful, discard the memory packages.), (Recommended Action: 'Users MUST re-install all the memory packages (SMU/PIE). If this message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_LIB-7-SHM_OPEN_ERR
### Response:
(Severity: 7), (Category: OS), (Description: shm_open failed to open the shared memory, that is already created. errno was not set.), (Recommended Action: It is notified that shm_open failed to open the shared memory, and errno was set to EACCESS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-FSDB_RESPONSE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Npu_driver response is not encoded becuase of bufsize is too small.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-ROUTES_DROPPED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A synchronous route operation request received when server initialized in asynchronous mode or vice versa; or when server is not ready.), (Recommended Action: Controller and/or agent must ensure that route operation requests are sent only in the mode specified by the client initialization message and server is ready. If message is still seen after meeting these conditions, contact Cisco for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-RED_MGMT
### Response:
(Severity: 5), (Category: L2), (Description: There has been a misconfiguration resulting in the problem described being hit in the redundancy handling for the bundle.), (Recommended Action: Correct the misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-MISMATCH
### Response:
(Severity: 7), (Category: MGBL), (Description: An unmatched ''' or '{' character was found part way through a token in a command string.), (Recommended Action: Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_11_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSMGR-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: A failure occurred initializing a necessary module of the QS Manager process. The process is unable to run and will respawn to retry. The system may be in an unstable state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-3-RESET_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The reset of the switch failed for some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Collect console log and the following information. - show control mlan switch-status - show control mlan switch-atu - show control mlan port-status <port> - show control mlan port-counters <port> - sh process ether_ctrl_mgmt)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR provide process-level isolation and memory protection?
### Response:
Cisco IOS XR uses a microkernel architecture where most processes run in their own protected memory space. Each process has its own virtual address space that is not accessible by other processes. This prevents a memory corruption or crash in one process from impacting other processes or the kernel.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR1_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-1 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-3-CONFIG_INVALID_NODEID
### Response:
(Severity: 3), (Category: L2), (Description: One or both of the PoAs in the redundancy group have an invalid node-id.), (Recommended Action: Reconfigure the peer ICCP-SM multi-homing node-id to a valid value. Note that both PoAs must have a unique node-id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_EVENT_CONN_EVM_HANDLER
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for the posix message queue. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-3-RX_BUFF_CRITICAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ethernet server is performing a periodic self test to ensure that sufficient receive buffers are available at any given time. This error msg means that the test failed and available receive buffers has gone below 64. Eth server will correct the condition by restarting itself and operator needs to do nothing.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-PRIMARY_SERVER_EVENT_CONN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNL_GRE_EA_PD-4-UNSUPPORTED_CONFIG
### Response:
(Severity: 4), (Category: PLATFORM), (Description: GRE Tunnel is not supported on SIP700 linecards in ASR9K. If the SIP700 exists in the chassis where GRE Tunnel is configured, ASR9K will emit this warning message and GRE Tunnel interface is not created in SIP700 hardware. The GRE Tunnel adjacency will be programmed to drop on the SIP700 linecard. That means any prefixes resolving over the GRE Tunnel will point to drop adjacency on the SIP700. If SIP700 receives GRE encapsulated packets, those will be dropped as well.), (Recommended Action: Ensure that the network topology is such that GRE tunnel packets never ingress or egress through the SIP700 linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-3-FAILED_CARD_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get card type from shelf manager.), (Recommended Action: 'Please run the command again')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-ERR_TPINFO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Crypto error message for failure to obtain trust point info for a given label), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CPU_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CPU complex on the indicated card is reporting an error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-APPLY_ERR
### Response:
(Severity: 3), (Category: SYSDB), (Description: This message indicates applying configuration failed. As part of CLI configuration 'commit', use CLI 'show configuration failed' to view this error and failed configuration.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-DIE_OVERTEMP_SHUTDOWN_COUNT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: LC or port shutdown is schedulded if the temperature value stays above the critical thresold for 24 hrs or more), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, LC or port will shutdown. Call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1-4-LOOPSTATUS
### Response:
(Severity: 4), (Category: L2), (Description: A configurable controller loopback status.), (Recommended Action: No action reqiured. Msg displays loop status)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-FALLBACK_SESSION_START
### Response:
(Severity: 5), (Category: L2), (Description: After all config dependencies are resolved MKA started fallback session on interfaces with fallback configuration), (Recommended Action: No action required (normal operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-MEM_MAP_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The memmory map operation mentioned in the message failed due to the reason mentioned in the message. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-LWM_FAILURE
### Response:
(Severity: 7), (Category: HA), (Description: A call to a LightWeight Messaging function failed. This may be due to a server being unavailable at the time of the call.), (Recommended Action: Collect system log information if it appears that this message is linked with failures in functionality. Otherwise, the message can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-4-COLD_RESET_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the NPU Driver to indicate that it failed to perform cold reset of specified NPU instance due to the specified reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-3-PLL_NOT_LOCKED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLL inside the FPGA device is not locked.), (Recommended Action: The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOPMGR-3-CHILD_NOTFOUND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Although a reference to a child interface is found in the parent interface, the child interface cannot be found via the search routine. Either the child interface failed to be added in the first place or the reference was not cleared when the child was deleted.), (Recommended Action: Examine the trace buffers and pay attention to all the insert and delete operations.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
uea-1-RESTART_NOT_SUPPORTED_SUPPL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message associated with RESTART_NOT_SUPPORTED See RESTART_NOT_SUPPORTED for explanation), (Recommended Action: See RESTART_NOT_SUPPORTED for explanation)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-CLEAR_MAPPING_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Cisco IOS XR System Manager (sysmgr)?
### Response:
The System Manager (sysmgr) is responsible for overall system initialization, monitoring, and restart functions. It is the first process started on each node. It spawns, monitors, and can restart other processes based on their criticality and restart policies. It also coordinates role transitions between active and standby RPs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-4-LWM_UNEXPECTED_ERROR
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This is a temporary ios_msg to identify when an unexpected error is returned when communicating with the IM server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-6-STATE_CHANGED
### Response:
(Severity: 6), (Category: L2), (Description: Informational message to notify the state transitions for a ring instance.), (Recommended Action: None. This is informational message to indicate an event may have triggered some ring protection action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-TEJAS_FPGA_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in read/write access of a tejas fpga device register. This error could result in communication loss between MSC and Services PLIM.), (Recommended Action: Do warm reload of the Services PLIM MSC. If the issue persists do a cold reboot of the same. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-RDDR_FIFO0_PAR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: RxDDR 1875 to 200 FIFO 0 parity error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFGHLP-6-CONFIG_SAVE_DELAY
### Response:
(Severity: 6), (Category: MGBL), (Description: An attempt to save the node configuration has taken longer than expected. This may be due to a high volume of activity within the configuration management system.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-4-ERR_MEM
### Response:
(Severity: 4), (Category: SERVICES), (Description: CGN modules are failed to allocate memory due to low memory conditions in the System.), (Recommended Action: Increase System Memory or stop some applications which are not required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-3-MEM_ALLOC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Packet server failed to allocate more memory.), (Recommended Action: It may be necessary to free some memory by exiting a program. If this message recurs, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-4-SRCINTF_NOTUP
### Response:
(Severity: 4), (Category: SECURITY), (Description: The interface specified as source interface is not UP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACL_EXCEEDED_MAX_INT_TCAM
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL exceeds maximum number of entries for internal TCAM.), (Recommended Action: Reduce the number of total physical ACEs or prefixes in object groups and/or range keywords in the ACL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-INVALID_L2VPN_STATE
### Response:
(Severity: 4), (Category: L2), (Description: When acknowledging a state update, the L2VPN infrastructure sent an invalid value.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-CRIT_EXIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An critical error occurred in NP Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REP_COM_REMOVE_ABORTED
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that the install remove inactive all triggered as part of replace commit operation has aborted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NQC-6-ISOLATION_NOTENABLED
### Response:
(Severity: 6), (Category: OS), (Description: RP Isolation is not enabled either on this platform, on this card type or it is not configured. A normal reboot will be done.), (Recommended Action: No action is required on this. This is only an informational message and is expected to show if the feature is not supported on the platform or has not been configured by the user.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between installing a package using the install add command versus the install activate command?
### Response:
The 'install add' command copies the package to the router's storage but does not make it active. The 'install activate' command is used to make the package active on the router. Packages can be added and activated in a single step using 'install add' followed by 'install activate' in a single command line.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-DECODE_TUPLE
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen server failed to convert sysdb tuple into readable config command. This may result in failure to show some of the configuration or in in writing configurations to internal config backup.), (Recommended Action: Collect the following details show version, show logging, 'show nvgen trace ascii | include DECODE TUPLE' output, show nvgen trace output, show runnning output, show config history and show tech-support parser. Contact TAC representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL_DAEMON-7-INIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-3-MEM_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A low-memory condition was detected in the Platform SPAN module.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-VRF_ALREADY_ASSOCIATED
### Response:
(Severity: 3), (Category: L2), (Description: VRF is already associated with logical switch, first remove this association.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-5-ROUTES_REPLAY_OK
### Response:
(Severity: 5), (Category: ROUTING), (Description: Serivce layer successfully replayed routes to Routing Information Base from a previously errored state.), (Recommended Action: No action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CT2_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_7_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-6-PORT_USAGE_BELOW_THRESH
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Ports consumed have fallen below 90% threshold for this particular IP. Details will be given in the meesage displayed), (Recommended Action: None. System should be in stable state and all Translation should go through fine)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-MEMORY_LIMIT_WARN
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting more memory for the specified profile, than the system has available for virtual services.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-CRE_STATUS
### Response:
(Severity: 4), (Category: DRIVER), (Description: When FC cards boot up and it has CRE fpga during bootup we check if cre is up , if not up we try a recovery of it because any pluggables wouldnt work without cre being up.If it doesnt recover we log a syslog that CRE is not up.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_LIB_IFDB-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: The system is low on memory and not enough was available to complete the request), (Recommended Action: Check the box for processes with excessive memory. If the problem persists collect the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHNLZD_EFCM-3-ERROR_CFG_BUFF_OPEN_MEMORY
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred in the Extended Flow Control Manager. EFCM was unable to open shared memory for debug.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-0-NO_RSP_ACT_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: LC CPU controller driver detected no active RSP in the system.), (Recommended Action: If there are no RSPs present or if both RSPs are undergoing a reload, then this is an expected message. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-3-CONN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This indicates a channel setup or communication failure within the process. This will lead to incomplete initialization of the driver impacting driver functionality.), (Recommended Action: If it is a message send failure then the software will retry. If it is a channel setup failure then restart the client process to check if the channel setup goes through fine 'process restart <process> loc <>'. Contact support team if the issue persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-5-ACTIVATION_COMPLETE
### Response:
(Severity: 5), (Category: INFRA), (Description: The activation of sessions on the SLAVE has been completed. This is either in response to CLI command or a dynamic failure trigger on a SLAVE which has been configured as a warm-standby.), (Recommended Action: None required if there has been any network event or administrative action that caused this activation of sessions. Session status may be checked on the slave router to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-REPLACE_COMMIT_PRECHECK_STARTED
### Response:
(Severity: 3), (Category: INSTALL), (Description: Specified message provides info that install commit as part of the replace operation couldnt be started as failures are seen during the precheck phase.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_PKT_MINLEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-3-ONBOARD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: As shown in the message.), (Recommended Action: SC Switchover can be performed to recover. To switchover, issue 'redundancy switchover location <Active SC>'.If the error occurs even after redundacy switchover, Please collect required_info log/trace and contact Cisco technical support representative with required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_PAK
### Response:
(Severity: 4), (Category: L2), (Description: The connection to packet manager was errored and the attempt to recover failed. Restarting the process should resolve the problem.), (Recommended Action: Restart the ppp_ma process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-DDR_BUS_BIT_STUCK_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: DDR bus databit stuck on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER_RSP4-3-POWER_OK_NOT_RECEIVED
### Response:
(Severity: 3), (Category: DRIVER), (Description: Power OK not recived 1. After Power Enable 2. After Power reset), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NCS4K_4H_OPW_QC2-4-LASER_IS_ON
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Some devices (DENALI, CFP2) cannot be upgraded in field if the CFP2 laser is ON. Download of these binaries is not reliable with laser ON. Download of these binaries with laser ON will disrupt traffic and possibly leave the device in an inconsistent, unrecoverable state. Donwload is prevented with laser ON on CFP2 ports.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_CID_SES_LIMIT_NOT_REACHED
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ND-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: There was a software error during process startup.), (Recommended Action: The process will restart and try to recover. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart, then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the process does not restart automatically, restart it manually. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
deflate-3-output_dir_error
### Response:
(Severity: 3), (Category: OS), (Description: The compression output directory cannot not be accessed with the reaaon given by the error string.), (Recommended Action: Please check the accessibility of the output diretory if it is from a user entered CLI. Please capture show log and error messages if the error is not due to user entered CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-EVQ_CRE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occured whilst creating an event queue during process initialization. This may be a system resource problem. As a result IS-IS will be unable to operate correctly.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_OPTICAL_PWR_LOSS
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SM-4-NONFATAL_ERROR
### Response:
(Severity: 4), (Category: INSTALL), (Description: A non-fatal error has been encountered. The system will continue to operate, but this error should be brought to the attention of TAC.), (Recommended Action: This is a non-fatal error and has no impact on functionality of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-4-SDIR_INVALID
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The Service Director process/library sent an invalid message to the SVII Adjacency Manager. This indicates a problem with the Service Director. It is likely that packets will not be correctly forwarded to some Service Virtual Interfaces.), (Recommended Action: It may help to restart the SVII Adjacency Manager and/or the Service Director processes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACLEARN-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to setup event manager.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-6-PROTOCOL_START_STOP
### Response:
(Severity: 6), (Category: L2), (Description: The operational status of the E-LMI protocol on the interface has changed. If undesired, the notification of protocol events can be turned off by configuring 'log events disable' on the interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-THREAD_PRIORITY
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred when trying to set the priority of the Protect thread. This will not cause any loss of functionality, e.g. notifications of bundle interface failure will still be delivered to trigger fast reroute. However, such notifications may be delivered with higher latency.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-EA_ALLOC
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that the pbr_ea process has failed to allocate memory. This may be due to low memory conditions on this particular node, or pbr_ea may be using more memory than it is allowed.), (Recommended Action: Reduce system scale. If the problem persists even with reduced system scale, please contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-7-SYSDB_REGISTRATION_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-EVENT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred in the main ospfv3_uv event loop.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_BOARD_ALERT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Power controllers on the fabric card are raising the alerts indicating that either the voltages or temperature on the card is at its tolerance limits.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE_SWITCH-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error has occurred on the switch port. The message has the port identification, the error register, and and the error description.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered in debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-4-ERR_SOCKET
### Response:
(Severity: 4), (Category: IP), (Description: Internal warnings related to socket operations.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-4-SEQUENTIAL_NAT_PRESENT
### Response:
(Severity: 4), (Category: SERVICES), (Description: SEQUENTIAL NAT PRESENT CALCULATION IS NEEDED FOR PRIVATE POOL CONFIGS PER VRF .), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ERR_TTY_IFH_PRESENT
### Response:
(Severity: 3), (Category: SECURITY), (Description: In the AV pair message recieved from the radiusd clients should have either ttyname or interface handle, not both.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-SOCKET_RESMGR_ATTACH
### Response:
(Severity: 3), (Category: ROUTING), (Description: The clns process failed to advertise itself to the system as a resource manager.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-CLOSE_DEVICE
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to close a file descriptor inheritited from the spawning process so that the appropriate device files can be reopened for exec to read/write.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-HA_PMW_CONN_REG_RETRIES
### Response:
(Severity: 3), (Category: L2), (Description: STP IO has failed to connect and register with the Process Manager Infrastructure after multiple retries. Reconnection and registration will continue to be retried at a slow rate. If STP IO fails to connect with Process Manager, it will not be notified of the ISSU switchover, and may result in unexpected behaviour.), (Recommended Action: Check the status of the Process Manager process (processmgr) for any obvious errors. Unless STP IO (stp_io) can reconnect to Process Manager, it will not be notified of the ISSU switchover, and so the ISSU operation will likely need to be aborted and retried. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-EVENT_CONN_INIT_FAILED
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error occured), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-SYS_MGR
### Response:
(Severity: 3), (Category: L2), (Description: Connection to sysmgr_proc_ready() has failed.Sysmgr process ready API failed.), (Recommended Action: No action is required. Process will be restarted.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-4-FAIL_LWM_REPLY_TOO_BIG
### Response:
(Severity: 4), (Category: INSTALL), (Description: Install director gave an incorrect message reply size to a client), (Recommended Action: Client will automatically resend LWM message with bigger buffer. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-SENDTO
### Response:
(Severity: 3), (Category: L2), (Description: The socket call sendto returned an error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_PKT_TOO_LONG
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet too long error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-WRONG_IMAGE
### Response:
(Severity: 3), (Category: INSTALL), (Description: insthelper detected that a wrong image has been booted.), (Recommended Action: Please boot the node with the correct MBI image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN EVPN Ethernet segment?
### Response:
To configure an L2VPN EVPN Ethernet segment, use the 'ethernet-segment' command within the EVPN instance configuration. l2vpn evpn
ethernet-segment identifier type 0 0000.0000.0001
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-4-CHAIN_UNBUILDER_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The software forwarding support for IEEE802.1Q VLANs was unable to clean up an interface. Forwarding should not be affected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_CLNS_MAC_ADDR_NOTIFY
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to notify the CLNS protocol stack of MAC address changes to the specified interface. It requires a restart of process for recovery.), (Recommended Action: Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-3-XID_COUNT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Incoming bridge XID count is more than allocated XID count.This may occur to due to a programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONCERTO-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: CONCERTO Event Manager event block error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-SDR_RELOAD_INFO
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that the SDR will be reloaded as part of the specified install operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_EA-3-EVENT
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error (other than EINTR) occured in the event loop. The process must exit.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_9_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-PTP_CLK_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IM related ptp failures), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_VRF-3-RD_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: RD information for the VRF is not present. This can happen either if the RD configuration of the VRF is missing (or) because of an issue in BPM process publishing the RD information to Speaker.), (Recommended Action: If the RD configuration is missing for the VRF, please add the necessary RD configuration and that should take care of fixing the problem. Sometimes we might see minor delay in BPM publishing the RD to speaker, in such cases no functional impact will be seen and things will recover as soon as BPM publishes the RD to BGP speaker. No further action is required for this transient case. For all other scenarios, please collect the required information mentioned below and if recovery is desired, please restart BPM process or remove and reapply the specific VRF configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_THREAD_MUTEX_LOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to lock a mutex failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_OBJECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to update RIB after an object state up event.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-XCVR_CODE
### Response:
(Severity: 2), (Category: L2), (Description: The xcvr code is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA - Enabling power for LC), (Recommended Action: No actions are required as this is just an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-EDM_DATALIST_ADD_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SBE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A single bit error was detected in CRAM/RAM of the IM in given slot. If it is in a critical region, IM will be soft reloaded else the error bit will be auto-corrected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_MEM_ALLOC_2
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The system has run out of memory'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SATORI-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Satori RP Kensho-JF CPU Subsystem DLL warning message. No system functional impact.), (Recommended Action: Nothing. Reporting normal progress of Satori RP Kensho-JF CPU Subsystem DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDR-3-SDK_INIT_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: CDR SDK init failed for that specified slot/phy_id'), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_SEQ_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 1 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to specify RSVP administrative groups in Cisco IOS XR?
### Response:
To specify RSVP administrative groups, use the 'mpls traffic-eng admin-groups' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng admin-groups Group1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_THREAD_SET_SPECIFIC
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to associate the specified per-thread resource with the thread. This may be due to a low memory condition but is most likely to be an internal software programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALLOCATOR-7-NULL
### Response:
(Severity: 7), (Category: OS), (Description: A client passed a NULL value into an allocator API, or an internal error caused a NULL value to be unexpectedly passed through to an internal API.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCOUNTING_HIGH_USAGE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when high usgae found in service accounting .), (Recommended Action: Collect Show tech and generated running core files.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-4-WHITESPACE_TRUNCATED_IN_SERVER_KEY
### Response:
(Severity: 4), (Category: SECURITY), (Description: Whitespace is not allowed at the end of a server key.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-3-UNKNOWN_FORUS_PAK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ethernet driver received an unknown for us packet.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCT_STOP_REC_RPL_INIT_FAILED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when acct stop record feature replication failed. File will not be replicated on standby.), (Recommended Action: Collect show tech subscriber.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-AUTH_COMPUTE_FAILED
### Response:
(Severity: 5), (Category: ROUTING), (Description: The process encountered an error when computing the authentication digest. This may be due to misconfiguration on the local or remote system. It is possible that no currently valid keys are available.), (Recommended Action: Check the password and authentication configurations on the local system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_MPLS_EA-3-ERR_INFO_TWO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-BER_SF_ALARM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provide information that Signal Fail BER (Bit Error Rate) alarm is set or cleared on a specific port based on the BER configuation. port: on which alarm is set/cleared status: set/cleared), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh running interface <> - sh controller <interface> <R/S/I/U> all - show tech-support ethernet interface location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-4-WARNING_RACK_NUM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: ROMMON RACK_NUM variable setting is different from the node_id rack field setting.), (Recommended Action: Set ROMMON RACK_NUM to proper rack number per chassis rack field)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-ERR_STR
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> show cef platform trace ipv4 all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_FETCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to fetch a notification event from RIB.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SHMEM
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal Error: Shared memory error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-BAD_COMMAND_RESULT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT received a bad command result for BMA free buffer request.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_RES
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from RES, Reserved for Network Synchronisation), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-ERR_SHMWIN_MUTEX
### Response:
(Severity: 5), (Category: ROUTING), (Description: NetIO or Mfwd terminated while holding shared mem mutex. Recovery action will be taken), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_ADVMASK
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to add itself to the advertising mask for the specified route and topology, that route corresponding to a connected route on an interface over which IS-IS is running. This means that any protocols which redistribute IS-IS into themselves will not receive the specified route. The problem is most likely to be caused by a failure by ipv4-io or ipv6-io to install the route at all, although it could also be due to low memory conditions.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_BLOCKED_BY_FIA
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Hard reset recovery action is temporary blockced untill FIA comes online. The network processor is in an unknown state and may not be operational.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_UPD-3-GOLDEN_UPGRADE_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: Golden PID firmware upgrade failed on PID and board may not be bootable post power cycle or reload as golden firmware corrupted. This cannot be upgraded via software again. The board need to be RMA'ed to fix this issue.), (Recommended Action: collect below logs on seeing this log before reloading or power-cycling the box 1. syslogs/console logs 2. show tech fpd 3. show tech obfl 4. show tech shelf-mgr 5. show tech ctrace 6. show tech fpd-serv)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-NO_POWER_FTV2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: 'The power needed for next V2 fantray exceeds the capability of the currently installed power supplies.'), (Recommended Action: - Please collect the following CLI command to determine the current budget situation and to see if there are any failed power modules. <CmdBold>admin show environment power-supply<NoCmdBold> - Install additional power supply modules and in case of presence of failed power module(s), replace those unit(s) until the alarm clears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_MPLS-3-WARNING_STR
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv6 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|mpls] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-STAT_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-1-FC_IN_CRITICAL_STATE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Both Fan controllers are not in working state which might damage the system. For the chassis to function normally, minimum one FC should be in XR state.), (Recommended Action: OIR and power enable atleast one FC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB failed to open a connection to the Sysdb Server process for one of the paths. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp router-id' command in IOS XR BGP configuration?
### Response:
The 'bgp router-id' command is used to manually configure the BGP router ID. By default, the BGP router ID is chosen as the highest IP address configured on a loopback interface. If no loopback interface is configured, the highest IP address from the physical interfaces is chosen. Manually configuring the router ID provides stability in case of interface flaps.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you commit software changes to make them persistent across reloads in IOS XR?
### Response:
To make software changes persistent across reloads, you need to commit them using the `install commit` command. For example\n```\nRP/0/RP0/CPU0:router# install commit\n```\nThis command commits the active software set to be used for subsequent reloads.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an internal error. Hardware or software is unable to initialize.The process will automatically respawn up to a fixed number of times to try and recover. Please check the error reason and description . %s - description of the error. %s - failure reason.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-PROCINIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during OSPFv3 process initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the additional following commands: - show tech-support routing ospfv3 detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-PASSWORD_READ
### Response:
(Severity: 6), (Category: MGMT), (Description: This is expected in case password is read successfully, this may be temporary, retry with entering username/password would recover the issue), (Recommended Action: The issue should be recovered when retrying to enter username/password)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-CHKPT_SWITCHOVER_BEFORE_IDT_RCVD
### Response:
(Severity: 4), (Category: L2), (Description: An RP switchover occurred before Checkpoint had fully mirrored MIB index values for Domains and Services to the standby RP. Thus, MIB indices may not have been preserved across the RP switchover.), (Recommended Action: CFM should still continue to operate normally, although MIB indices may have been lost.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN central services feature?
### Response:
The MPLS VPN central services feature allows MPLS VPN providers to offer centralized services, such as Internet access, to VPN customers. It enables traffic from VPN sites to be routed to a central site for services before reaching its final destination. Central services VPNs are implemented using route targets and BGP route importation at the central services PE router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_FM_LIB-6-V6_ANCHOR_PREFIX
### Response:
(Severity: 6), (Category: L2), (Description: The IPv6 compression anchor prefixes are changed. The linecard needs to be reload to make the changes effective. This is not an error message or condition.), (Recommended Action: The IPv6 compression anchor prefixes are changed. The linecard needs to be reload to make the changes effective. This is not an error message or condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-PKT_INT_ERR_AT_ILIF_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Packet Integrity Error at link interface from NP/MUX on FIA), (Recommended Action: Verify correct link serdes error Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-NSF_CHKPT_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The IS-IS process failed to initialize the checkpoint service for the specified error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-COUNTER_OVERRUN
### Response:
(Severity: 3), (Category: MGBL), (Description: The statistics infrastructure has received an update from a stats collector for which one or more values are erroneously high, and may cause the datarate calculation to wrap. This message indicates a bug exists in the relevant stats collector. The collector's node and jid will be indicated in the error message. The output of 'show statsd collector brief' can be used to determine what process the JID belongs to.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-CONFIG_OUT_OF_SYNC
### Response:
(Severity: 3), (Category: LICENSE), (Description: Smart Licensing Configuration does not match the value of the enable flag in Trusted Store. This can happen if a configuration is copied onto the system and a reload occurs. If the new configuration does not contain the Smart Licensing Enable command, the value in Trusted Store will not match.), (Recommended Action: Apply the desired Smart Licensing Configuration Command and persist the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-USER_DEF_PROFILE_LC_RELOAD_REQ
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: If the hw-module command is used to configure the user-defined TCAM key parameters and the lc is not reloaded, there will be inconsistency between the config in DPA and the hardware. Needs attention with line card reload.), (Recommended Action: Reload the affected lc for new profile to take effect.=======)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLCTRLR-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified MLCTRLR Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-7-SYSDB_BIND_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: Error binding to sysdb path), (Recommended Action: Copy the message exactly as it appears, andreport it your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-INVALID_BGP_PATH_FLAGS
### Response:
(Severity: 3), (Category: ROUTING), (Description: Received an invalid combination of BGP path flags), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_NB_SERDES_4_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data north bound serdes link 4 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-RSPI_ALIGN_MISMATCH
### Response:
(Severity: 0), (Category: PLATFORM), (Description: RxSPI align 16B module control bits mismatch.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_Driver-1-UPGRADE_ALERT
### Response:
(Severity: 1), (Category: INFRA), (Description: Update FPD upgrade alert), (Recommended Action: The reson for failed FPD upgrade to be analyzed. Please contact Cisco Technical)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-5-THRESHOLD_SET
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, do SFP OIRs a few times. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_HDR_EXT_FIFO_OFLOW_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg hdr ext fifo overflow on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the three planes that Cisco IOS XR uses to secure access to the router?
### Response:
Cisco IOS XR uses three planes to secure access: 1) The admin plane which has full access to the entire router. 2) The SDR plane which has access to resources and configurations within a Secure Domain Router. 3) The management plane which has access to individual command-line interfaces.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-LOAD_INTERVAL_CONFIG
### Response:
(Severity: 3), (Category: MGBL), (Description: The statistics infrastructure failed to apply load-interval configuration for some interfaces. This means that the data rates reported for the affected interfaces (in 'show interfaces', for example) may not cover the time periods specified in the running load-interval configuration.), (Recommended Action: Restart the global Stats Manager process (statsd_manager_g). If the error is still seen, re-apply the load-interval configuration for all interfaces. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-3-NOTIFICATION_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: TCP was unable to queue an SSO related notification message towards its client. This may leave NSR operations impaired.), (Recommended Action: The process may attempt to recover from this situation by retrying the operation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLDR-6-PARTNER_IS_UP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Post switchover, this node has detected that it's partner RSP has come back up.), (Recommended Action: There is no action required. Every time a partner RSP undergoes switchover this will result in this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-FIELD_ENTRY_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DPA failed to create entry for the Group on this NPU.), (Recommended Action: The failure caould be because we ran out of available free entries for this Group on this NPU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCT_STOP_REC_FILE_INIT_FAILED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when acct stop rec file init failed.), (Recommended Action: Check the harddisk space. Try disable and then enabling the accounting stop storage feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-KDUMP_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OS running on the indicated card is reporting an error for kdump.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_THREAD_MUTEX_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while creating a mutex for use by a client with the specified ID. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FSMTIMEOUT_RSP_ISOLATION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node was in an isolated state from the rest of router for too long. The recovery action is taken automatically by shelf manager at this point by rebooting the affected node.), (Recommended Action: None is required, the shelf manager will reboot the isolated node to have it come out of isolation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_7_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_API-3-TLV_MSG_DECODE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager TLVLIB failed to decode the TLV message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-RECONNECT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: STP has encountered an error while attempting to resynchronize its data with Interface Manager. The process will restart automatically to correct the problem.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_DRIVER-6-INTERRUPT
### Response:
(Severity: 6), (Category: L2), (Description: HW interrupt occurs.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-MIPC_INIT
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to initialize with Metro IPC server.), (Recommended Action: Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-2-VIN_LOW_LEVEL_CRITICAL_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Input voltage level is too low for this module, it crossed the critical alarm threshold'), (Recommended Action: 'Check/Charge the batteries.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-NO_CONFIG
### Response:
(Severity: 3), (Category: OS), (Description: No configuration for PIFIB flow handling was found. Default characteristics will be used for all packets.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVENTORY_PARSER-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-MEMORY_PROTECT_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Probably software bug, or OS bug. Dumper will be impacted by this.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX8749_CDMA-3-LTRACE_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace initialization has failed, this might be a program level issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-5-MSG_DLRSC_CPU_FAILOVER_NORMAL
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The backup-dlrsc CPU inst on standby DRP should failover ahead of the ndlrsc CPU instance. This is done when we detech that the Active DRP's CPU node went down.), (Recommended Action: None; this CPU will failover to active state)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_EVENT_CONN_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for disconnection or connection error event. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ether_spa_mac_error-1-SPA_SHUTDOWN
### Response:
(Severity: 1), (Category: L2), (Description: MAC TX/RX FIFO ECC errors have occured. Auto-recovery attempts have also failed to recover the SPA. This is indicative of a hardware issue. Manual intervention is required.), (Recommended Action: If the problem persists try reloading the SPA. If reloading SPA doesn't fix the issue try below steps: 1. Re-insert the SPA and make sure it is seated properly. 2. If issue still exists, try moving the card to a different subslot or a differnet slot altogether. 3. If problem continues to exist after Step (2), replace SPA with a new one or contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_CORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory correctable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-ACTIVE_SOFTWARE_COMMITTED_INFO
### Response:
(Severity: 4), (Category: INSTALL), (Description: The currently active software has not yet been 'committed' to the system. This means that if the system reboots then the committed software will become active. Note that a failover will not cause the committed software to become active.), (Recommended Action: Verify that the system is operating as expected. Use 'system verify' to help validate the system. Use 'install verify' to validate the install sub-system. If the system is operating as expected then execute the 'install commit' command to commit the active software so that it is used if the system reboots.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_EA-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured during the initialization of the process. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-CHKPT_INIT
### Response:
(Severity: 3), (Category: SERVICES), (Description: Failed to register the application with the checkpointing server. This will impact the functionality of cgn_ma during switchover. CGN_MA will restart when we hit this issue.), (Recommended Action: If the issue persists after process restart, Please collect the following data and contact support. 1. show tech chkpt cgn_ma 2. cgn_ma traces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPT_SUB-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an severe error message in the DPT module to indicate that an error was seen during init operation.), (Recommended Action: Please collect the console log, DPT traces (show dpt trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_MEM_ECC_FAIL_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory ECC failure on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. Please verify the bridge FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-OFFLOAD_DECODE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while attempting to decode a batch of offload messages which had been received. The source of the error is the offload infrastructure. The received messages will be dropped as a result of this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-EAD_SRV6_SID_LIMIT
### Response:
(Severity: 4), (Category: L2), (Description: There is a limit on the number of SRv6 SIDs that can be processed by EPVN in one path attribute. The number of SIDs currently supported is displayed in the message - the SIDs that are added that exceed this limit are dropped.), (Recommended Action: Currently EVPN supports receiving a maximum number of SRv6 SIDs. The network should be set up so that this limit is not exceeded. Please check that the configuration is correct before contacting support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-BFD_INVALID_NBR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error indicating that an attempt has been made to create a BFD session for a neighbor type that is not supported by BFD.), (Recommended Action: The BFD session for the neighbor in the log will not be created. If a BFD session for this neighbor is not required, no further action is needed. To re-attempt creation of a BFD session for this neighbor, remove and re-add the bfd fast-detect configuration for the neighbor.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of TURBOBOOT in Cisco IOS XR?
### Response:
TURBOBOOT is used in Cisco IOS XR for booting the system from a minimal state, often utilized during system recovery or initial software installation to load a specific software image.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-EXTERNALERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An external software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show tech-support routing ospf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-RX_PLL_LOS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5346 RX PLL loss of signal detected/cleared for RSP), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_RIB_RESET
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS initiated a reconnection to the RIB to recover from an error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_THREAD_CREATE
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-MISSING_CTX
### Response:
(Severity: 7), (Category: HA), (Description: During a re-registration, an internal context structure was not found. This is probably a coding error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-INSTALL_PKG
### Response:
(Severity: 6), (Category: OS), (Description: Active installed packages), (Recommended Action: Information of the active packages. No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LINK_CREATE_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: An entry could not be placed in the links database. The full error message should indicate where the failure occured and why.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-STATE_FSM
### Response:
(Severity: 3), (Category: L2), (Description: An operational error occured when handling a port state event in the port state machine, and the internal state may be left in an inconsistent state without user intervention.), (Recommended Action: 'shutdown' and 'no shutdown' the affected interface, this should allow the state machine to recover its operational state. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CHKSUM_ERR_0_FIA_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checksum error - 0 from FIA on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-LWM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-6-INFO_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the Egressq/Tor Driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSI_NETIO-5-UNSUP_MAJOR_VERSION
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: CSI DLL does not support DLL upgrade across major version changes. This will cause netio to take default action to restart for upgrade to take effect.), (Recommended Action: This message indicates that netio will take default action to restart as 'csi netio' dll does not support dll upgrade across major version number changes. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-INDUCED_GSP_UP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that shelfmgr was induced to send out a gsp node-up notification for the given node by the user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_UDI_MGR-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The ASR9k License sync process exited due to a fatal error. Check the error string to determine what has happened.), (Recommended Action: Collect system log information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE-3-ERR_SHMEM_TRNC_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to truncate the shared memory file fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-0-PCIE_LINK_FAIL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: LC CPU controller driver detected FPGA access failure. This error message is thrown after observing consistent fpga access failures, one of the possible reason could be PCIE link down between PCIE switch and FPGA. or there could be software error in reading fpga.), (Recommended Action: Reload the LC that has the problem atleast three times. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-MAP_RESOLVER_MAP_REQUEST_FILTERED
### Response:
(Severity: 5), (Category: IP), (Description: 'Map-resolver filters incoming map-request if it does ' 'conform to the configured allowed-locator policy.'), (Recommended Action: 'Configure allowed-locator policy to permit the ' 'filtered map-request to get processed.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-NSR_INTF_TOPO_UNREADY
### Response:
(Severity: 5), (Category: ROUTING), (Description: When ISIS just started, area or topology structures has not be setup yet, NII interface init needs to wait until they are ready.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-GEN_ERR_2
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered an Error in operation. The error string updates the reason for this error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-3-INIT
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-ERR_SOCKETFAIL
### Response:
(Severity: 6), (Category: SECURITY), (Description: None at this time), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-LCL_ATTRIB_EXIT_OOR
### Response:
(Severity: 6), (Category: ROUTING), (Description: The local attribute index database on the LC has resources available. The number of attributes programmed to local attribute index zero while the OOR state was red is displayed. If you wish to recover them, then issue a 'clear cef vrf <vrf>'.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'install prepare' command in Cisco IOS XR?
### Response:
The 'install prepare' command in Cisco IOS XR is used to pre-download software packages to the router and prepare them for activation, allowing for a smoother upgrade process.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A generic RIB error is seen.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-POLICY_DECODE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to decode a configured policy. This could indicate an issue with CFM or the Embedded Event Manager service. No Bandwidth Notifications will be executed for the affected policies.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-QUEUE_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: An software error occurred while performing the stated action (queue operation) on a packet or message. This is a serious error and could indicate memory corruption or a bug in the software. This is not a service impacting error.), (Recommended Action: Check the log ('show logging') to determine if there are any other related error messages. Also, please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area. Copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Also collect the information from 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-7-DEBUG_CONT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicates an condition occurred beyond which execution of the bpe_driver may continue), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_MEM_SELFTEST_FAIL_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory self test failure on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. Please verify the bridge FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NODE_CPU_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the Shelfmgr detected the CPU of the specified node has reset. The specified node will attempt software reload.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-GET_REPLICA
### Response:
(Severity: 7), (Category: OS), (Description: The Rds library couldnt get the replica entry when it queried for it. The entry might not have been updated.), (Recommended Action: This is a Debug message.No action required. If the problem persists,Contact Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-7-ERR_NULL_ARGS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to create thread due to internal error.), (Recommended Action: Restart the fabio_svr process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IPSEC_CLOSE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to close an IPSec SA for the named interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-LIST_IS_FULL
### Response:
(Severity: 7), (Category: INSTALL), (Description: The Install infrastructure has encountered an unexpected state, and will be unable to process the current request or operation), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-BAD_ID_HW
### Response:
(Severity: 3), (Category: DRIVER), (Description: Hardware in the specified location could not be identified as genuine Cisco product by card manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-PCIE_BAD_WRITE_ADDR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: CIB PCIe bad write address), (Recommended Action: Reset board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_EA_OOR-4-NP_FLOWS_OOR_RED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Performance traffic monitoring has encountered an out-of-resource condition. Performance traffic monitoring process on the linecard has detected that the number of flows being monitored on a NP has reached maximum capacity. New flows will no longer be learnt), (Recommended Action: Reduce the number of flows being monitored on the NP. This can be done by 1) Modifying ACL: (a) Remove the performance traffic service policy from the interface (b) Modify the ACL used in the service policy to be more specific to match a smaller set of flows to be monitored (c) Reapply the service policy to the interface 2) Moving monitored flows to a different interface on a different NP)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_PRINT_OPTION_SET_VAL
### Response:
(Severity: 7), (Category: MGBL), (Description: Printing value of write_chip, set_system, calender and boot time flag set based on arugment.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_JBI-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message from the FPGA upgrade facilitator , it indicates that something has gone wrong with FPGA programming.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_INVALID
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from invalid.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-3-ASSERT_MSG
### Response:
(Severity: 3), (Category: OS), (Description: rds hit an internal assert. An unexpected error condition has been seen due to which RDS hit assert.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-SRSP_STANDBY_EOBC_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Standby RSP has detected an error with the standby eobc link between this standby RSP and one or more line card)(s)), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-3-CONFIG_INIT_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-3-BAD_VISIBLE_COUNT
### Response:
(Severity: 3), (Category: IP), (Description: This is an internal error. It indicates that the addresses visible to the clients are more than expected. This can result in IP ARM not sending an address update to its clients.), (Recommended Action: Get the output of show tech-support, show arm [ipv4/ipv6] trace, running coredump of the process. Unconfiguring, reconfiguring the interface may help in recovering the from error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-HW_DETECTED_ERROR_ISN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver HW error interrupt handler was invoked and found valid PCI ISN register from a Cpuctrl Internal Access failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-STATUS_MUTEX_LOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver was unable to lock the status variable for the interrupt thread.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_BAG
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the Bag Client library. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error. The error will affect PPP MA's ability to provide operational management data, but won't otherwise affect PPP MA's operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_MAIN-5-CLOCK_ACCURACY_LEGACY
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The system timing is switching to legacy accuracy mode as a result of removing the 'timing-accuracy enhanced' configuration. This switching operation may result in a transient flap in timing (PTP/SyncE) or in the PLL states. This is an expected behaviour and no further action is needed from the user.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install verify platform command in IOS XR?
### Response:
The 'install verify platform' command is used to verify that the router's hardware platform is compatible with the software packages being installed. It checks the hardware components and their revisions against the requirements of the software and reports any compatibility issues found.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPI-3-FILE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured while reading the file), (Recommended Action: Try to rerun the CLI, if it fails repeatedly contact support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD-3-ASSERT
### Response:
(Severity: 3), (Category: SERVICES), (Description: The process is in an inconsistent state. The process will exit and restart. All data will be resynchronised after the restart.), (Recommended Action: No action is required to recover the system, this will happen automatically. Report this issue to your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KENSHO_GL-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr encountered an error during initialization resulting in restarting the Procmgr process. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still non-operational, execute 'process restart procmgr location <>'. If it the process still fails to spawn, contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-IIR_MDR_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'IIR Callback evoked after MDR Shutdown start.' 'This will not effect the process.' 'This operation is optional '), (Recommended Action: 'ISSU manager will use some other API' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_PAK_RECV
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error encountered during RIP packet receive operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FT-3-UNSUPPORTED_FAN
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The type of fan is not supported in the release.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCDMA-3-ERR_EVM_NOTIFY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl Event Manager notify error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-5-AUTHORIZATION_EXPIRED
### Response:
(Severity: 5), (Category: LICENSE), (Description: The device has not communicated with Cisco for an extended period of time and the device has not automatically renewed the entitlement authorizations.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-IM_ATTR_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to initialize the IM attribute library. This error will prevent IS-IS from normal operations.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEAT_MGR-3-UIDB_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: UIDB stores the reference to ACL entries programmed in TCAM for the interface, protocol and direction. This error message is due to one of the following reasons: 1. Initialization failure of Feature Manager and UIDB manager interface. 2. Failure to set reference of hardware entries programmed or removed for security ACL in UIDB on configuration or system changes. This failure can lead to mismatch between hardware and software configuration.), (Recommended Action: If the failure is on initialization, process restart is done automatically. No manual action is required. If the failure is to set configuration bits in hardware on detaching a security ACL from interface, attach and detach security ACL again on the interface. In all other cases, detach ACL in the error message from all interfaces of the line card where issue is seen. Now, re-attach ACL to the interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMACTRLR-4-UPDOWN
### Response:
(Severity: 4), (Category: L2), (Description: The specified IMACTRLR is operationally down due to alarm. Check alarm status using show controller Mlt command on the cli.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-DLL_LIST_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: During the processing of a software change notice, the command to get a list of dlls that this process had open failed. The routine will now attempt to fall back on default disposition.), (Recommended Action: Check the install logs if all the packages are downloaded and install operations completed properly Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-NO_POWER_AVAILABLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: 'The power needed for shelf equipment exceeds the capability of the currently installed power supplies.'), (Recommended Action: - Please collect the following CLI command to determine the current budget situation and to see if there are any failed power modules. <CmdBold>admin show environment power-supply<NoCmdBold> - Install additional power supply modules and in case of presence of failed power module(s), replace those unit(s) until the alarm clears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-7-ASYNC_SEND
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicates sc-reddrv failed to send redundancy status to RMF.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-FALLBACK_CLEANUP_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: Transaction cleanup failed when booting from the fallback software image.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-CD_STATE_CHANGED
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'CD L2 or Reuse Channel Created/Removed/Expired'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_REPLY_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system could not reply to the message that was sent by the client.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-SLOTORDER_REGISTER
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to register the slot order display failed. The error is displayed in the message'), (Recommended Action: Collect show nvgen trace, show logging and send this to tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_REGISTER_DEBUG_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to register with debug. This would prevent process from logging debug messages.), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-7-ERR_SYSDB_EDM_REG
### Response:
(Severity: 7), (Category: L2), (Description: The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-3-CREATE
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-PARAM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software which occured due to some problem in the parameters passed. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-I2C_WRITE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An error occured while writing to I2C device. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-MISCONFIG_CAP_SUPPRESS_ALL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Possible misconfiguration with 'capability suppress all'. The neighbor's remote-as is a 4byte AS number which is incompatible with this configuration which suppresses negotiation of all capabilities for this neighbor.), (Recommended Action: Check the bgp configuration for this neighbor and ensure that none of the neighbor's configuration require Capabilities negotiation, or remove the 'capability suppress all' configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-6-APS_CHANNEL_ACTIVE
### Response:
(Severity: 6), (Category: L2), (Description: A ring node, which was had previously not received R-APS messages for an extended period of time, is now receiving R-APS messages. A properly functioning ring will have an R-APS messages transmitted nominally every 5 seconds), (Recommended Action: As R-APS messages are now being recieved as expected, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-MSG_SEND_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-CHECK_FABRIC_CONN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Control ethernet connection is lost. Checking fabric connectivity to decide if reset needs to be done), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-2-ADMIN_HOST_VERSION_MISMATCH
### Response:
(Severity: 2), (Category: INFRA), (Description: The install software component has detected that the local installed software on host and sysadmin are not same relative to the software installed on the rest of the system. This event may be caused by the reloading the sysadmin after system upgrade or ISSU without doing install commit.), (Recommended Action: This node has to be manually reloaded using 'hw-module location <id> reload' command. To get more information on what caused this event, you can run the command 'show tech-support install'. If the problem happens after reload as well then node has to be reimaged/rebaked.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-SHM_DEVICE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to find the HPI device's corresponding shared memory. %s-Function name. %d-Client ID. %s-Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-3-BOARD_INCOMPAT
### Response:
(Severity: 3), (Category: DRIVER), (Description: This indicates that there is an incompatibility between Active and Standby RSP4 boards which may lead to mismatch in synchronization between Active and Standby Configuration), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_CONSUMER_LIB-3-NULL_CONSUMER
### Response:
(Severity: 3), (Category: OS), (Description: cds lib has got a message to process, but consumer has not yet registered. please collect cds consumer ltrace.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-5-ERR_CONT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates an error occurred beyond which execution of the Interrupt controller_driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-3-INTERFACE_RECOVERY_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: If an error occurs while retriving sub-interface information from the system, PVSTAG attempts to recover automatically. This message is seen if that attempt to recover fails, or if more than the maximum number of attempts have been made. After this error is seen, it is likely that PVSTAG will not operate correctly for some VLANs.), (Recommended Action: It may be possible to recover by restarting the pvstag-io process on the affected line card, using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-2-ERR_INTERFACE_CREATE
### Response:
(Severity: 2), (Category: L2), (Description: The interface creation in IM faces some issue as there was some resource failure detected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - Check Memory conditions in the system)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IF_DRV-6-TRANSCEIVER_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: TRANSCEIVER entity is inserted), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-GRE_KEY_OPTION_REQUIRED
### Response:
(Severity: 3), (Category: IP), (Description: GRE Key option is required, but missing in the PBU.), (Recommended Action: Ensure that GRE encapsulation is configured on the MAG. If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-5-OPTICS_OIR
### Response:
(Severity: 5), (Category: L2), (Description: The Optic Module (CPAK/QSFP/SFP+) for the specified port has either been inserted or removed. %s - either 'inserted' or 'removed' %d - port number.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-HIGH_TEMP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high temperature. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PARTICLE_SMALL_POOL_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Small pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_OC_PKT_LTH_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EBS from FIA packet length mismatch error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MLACP_DISCONNECT
### Response:
(Severity: 6), (Category: L2), (Description: mLACP has disconnected from the specified devices.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SKIP_CPU_INFO
### Response:
(Severity: 7), (Category: OS), (Description: Skipped CPU info dumping in OS debug info, as it's requested by the target process. Down time critical processes which can't afford extra core dump time due to CPU info, might request this skipping.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-DATALIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_4P_OC192-3-DEVICE_INTR_CLEAR
### Response:
(Severity: 3), (Category: L2), (Description: The previously reported excessive interrupts condition has been cleared. Interrupt rate limiting has been disabled.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_CHKPT_DUPLICATE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: Whilst restoring one of its checkpoint tables PPPoE MA found multiple entries for the same interface. PPPoE MA will use the first checkpoint entry it finds for each interface and ignore any subsequent duplicates. This is caused by a programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-4-OOR_OK
### Response:
(Severity: 4), (Category: ROUTING), (Description: This router has fallen below the maximum value for the number of cache entries allowed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_MA-3-PLCYMAP_UNDEFINED
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: The policy-map name that was configured in the service type dynamic-template has not been defined in the system.), (Recommended Action: Define a policy-map with the name used in the service-policy command or change the name in the command to an existing policy-map. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-6-SAT_UNQUAL_PPM
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Unqualified PPM Inserted condition occurs when a PPM with a nonqualified product ID is plugged into the card's port; that is, the PPM passes the security code check as a Cisco PPM but is not qualified for use on the particular card.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD-3-INIT_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Service Role Daemon has failed to start up. The operation being attempted is detailed in the error message. The Service Role Daemon will be restarted automatically.), (Recommended Action: If the error indicates an Out Of Memory error, then attempt to increase the available resources. Otherwise, if the error persists, contact your technical support representative copying the error message exactly as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_ALLOCATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while allocating FGID array. This may be due to - number of FGID passed exceeds set limit dues to message size limit - Low available memory - Passed fgid_type is NULL), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_ACL_UPDATE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize callback functions for receiving updates for IPv4/IPv6 security ACL configuration.), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SHMEM_CLIENT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal Error: Shared memory client error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-TIMER_SETTIME
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when arming a timer using timer_settime.), (Recommended Action: Restarting the lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-INVALID_UPCOMING_LEAP_SECOND
### Response:
(Severity: 4), (Category: L2), (Description: A leap second event scheduled for midnight tonight will result in the UTC offset changing by more than one second. This is an invalid change since the final minute of the current day may only contain 59, 60 or 61 seconds.), (Recommended Action: This error suggests a misconfiguration. If using leap second offset configuration, adjust the configuration such that the UTC offset will only change by one second. If using leap second file configuration, check the file for consecutive entries which differ by more than one second.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-PCIE_TXIF_FIFO_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: CIB PCIe Tx interface FIFO multiple bits error.), (Recommended Action: Reset the board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-SET_RLIMIT
### Response:
(Severity: 3), (Category: OS), (Description: QNET process tried to set the rlimit for the process but encountered error The process will exit and retry again), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-SERDES_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected a serdes error on link 3.), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-0-LC_DP_SWITCH_LOOPBACK_FAILED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-UNEXPECTED
### Response:
(Severity: 7), (Category: HA), (Description: An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-SATELLITE_FABRIC_VERSION_UNSUPPORTED
### Response:
(Severity: 3), (Category: L2), (Description: There are some Satellites in the fabric which are not compatible with the configured 'network' version of the 'CFM on Satellite Fabric Links' feature. All fabric links to/from those satellites will be unprotected.), (Recommended Action: Ensure that the CFM Satellite fabric link configuration type matches the capabilities of the Satellite devices and expected fabric protection.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-SD_ERR
### Response:
(Severity: 4), (Category: SERVICES), (Description: When a service attachment (e.g. a firewall attachment) is configured on an interface, the local RSPP MA process (the service diversion management agent) must request information on the attached service from Service Director to be able to implement the required diversion. This error indicates that a problem has arisen in this request. The error string given should give more details on the error that has occurred.), (Recommended Action: For non-resource errors, removing and adding back the configuration that prompted the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_ETHERNET-3-CTRLR_SETUP_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred initializing a new Ethernet controller. The controller cannot be created with the supplied parameters and must be deleted before attempting to create with valid parameters. Until this is resolved the port will not be able to carry an Ethernet signal.), (Recommended Action: If this is seen following a SMU install then uninstalling the SMU may workaround the issue whilst seeking support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp igp sync' command in IOS XR?
### Response:
The 'mpls ldp igp sync' command is used to enable LDP-IGP synchronization. This feature ensures that LDP is fully operational on a link before the link is used for forwarding traffic. It prevents traffic loss during IGP convergence by delaying the use of a link for forwarding until LDP has converged on that link.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-7-LTRACE_INIT_ERR
### Response:
(Severity: 7), (Category: IP), (Description: IP ARM failed to initialize module to allow tracing of important events. This may happen during process (re)start. The process will exit and try to recover from the error.), (Recommended Action: If the msg is not seen multiple times, it can be assumed that the process has recovered. If the process cannot recover from this error, it may not be able to run. Then it is a fatal error. Collect the output of show tech-support, show arm [ipv4/ipv6] trace.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_BOARD_POWER_FAULT
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabric board is not operational due to the a power fault.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-STANDBY_NOT_READY
### Response:
(Severity: 4), (Category: INSTALL), (Description: Install director expected standby nodes to be ready, however, when verifying found at least one that is not ready.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOL_MAPPERA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-MAL_DATA_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Info about media access lib, used to communicate with linux ethernet device driver. %s- Message description. %d- Value of the parameter described above.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key characteristics of the Group Services Protocol (GSP) IPC?
### Response:
GSP is a connectionless asynchronous multicast-based IPC mechanism. Key characteristics include\n- Uses publish/subscribe model - senders and receivers join multicast groups\n- Supports one-to-many communication efficiently\n- Sender not blocked, leading to higher throughput\n- Messages can be sent to all group members or a filtered subset\n- Reliable delivery with ack/nack from receivers\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-SERVER_MUTEX_INIT_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: HA), (Description: Registration of debug services failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-BAD_DIR_PREFIX
### Response:
(Severity: 7), (Category: INSTALL), (Description: The Package infrastructure could not determine which cards a particular file belongs to. Either the PIE file is corrupt, or the Package infrastructure is behaving incorrectly. The current request or operation will not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-3-EXIT_ERROR
### Response:
(Severity: 3), (Category: LICENSE), (Description: The license manager encountered a error condition during intialization this could happen due to platform service initialization error like EVM service failed ,trace server init failure etc . All these are unlikely failure but if it occur it could be resolved during restart of licmgr process .), (Recommended Action: Please restart the licmgr process command 'admin process restart licmgr'. Another option is reloading the RP card by command 'admin reload'. If the error log messages is reoccuring , please collect information using the commands 'show tech-support license ','show license trace platform' and contact your tech support representative and provide them the collected information and exact message as displayed on screen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-MAC_1_TX_FIFO_OFLOW_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: MAC on NPU-1 had transmit fifo overflow on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2CCTRL-2-IO_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: I/O Communications Failure with a Device on the I2C Bus), (Recommended Action: Please attempt to correct the error by reloading the card by issuing the command in admin mode -reload location <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-6-C_SHIM_QUERY_INTERNAL_ENTERED
### Response:
(Severity: 6), (Category: L2), (Description: Debug information - Indicates control reached a particular functionality.), (Recommended Action: *None*.Informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-EVENT_MANAGER_CREATE
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_manager_create() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-AF_LIB_FILE_WRONG_INFO
### Response:
(Severity: 3), (Category: ROUTING), (Description: 'The data in the Address Family data file was corrupt'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_29
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-TIMER_CREATE
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when creating a timer using timer_create.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-3-EVENT_LOG_NOT_FOUND
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred during the event log open process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_CLIENT-3-DLL_NOT_PROVIDED
### Response:
(Severity: 3), (Category: HA), (Description: Every chkpt client that requires mirroring should provide call back DLL to handle the endian neutral transformation. If DLL is not provided, check pointed records might get corrupted in mixed endian mode RP.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-CFG_WRITE
### Response:
(Severity: 7), (Category: SYSDB), (Description: A non-management client illegally modified part of the system configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-7-LINK_SHUT_DOWN
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver encountered an error on the annunciated Fabric Switching Element link and the link is brought down.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-SWITCHOVER_SUPPORT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message has failed. As a result, the mentioned driver on the card that puts this message will not be notified of failover of RP.), (Recommended Action: Restart the mentioned driver on the card that puts this message. If it is still non-operational,Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-SHRINK_IPV4_6ADDRESS_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Shrinking of expanded ipv4_6address failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'metric-style' command in IS-IS configuration?
### Response:
The 'metric-style' command is used to configure the type of metric used by IS-IS. The options are 'narrow' (default) which uses 6-bit metrics, 'wide' which uses 24-bit or 32-bit metrics for greater scalability, and 'transition' which allows both narrow and wide metrics during a transition period.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNSEC-2-SESSION_SECURED
### Response:
(Severity: 2), (Category: SECURITY), (Description: Otnsec session is secured), (Recommended Action: No action required (Normal Operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLL-3-UPGRADE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Firmware upgrade failed for the PLL device. Collect show tech-support platform timing for further investigation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-BOARD_POWERUP_NOT_HAPPENED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVE-3-AC_DELETE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Error was encountered in AC delete for the specified vni. This error may \ rectify itself, but in some cases can cause vni to be programmed \ incorrectly, resulting in traffic loss.), (Recommended Action: Please try to unconfigure and reconfigure the vni. If the same error is \ seen again, please contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_8_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Allocation of memory failed.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_REX-3-MSG_REPLY
### Response:
(Severity: 3), (Category: SERVICES), (Description: The diversion manager process was unable to send a reply to a message sent to one of its clients. Diversion information may be inconsistent.), (Recommended Action: Restarting the rspp_rex and fwc processes should clear the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-5-TCAM_MISMATCH_DETECTED
### Response:
(Severity: 5), (Category: L2), (Description: This message indicates the detection of an inconsistency between the LC CPU software view of TCAM content, and what is actually found in hardware. Recovery is initiated automatically upon detection of such a mismatch. Once recovery completes, troubleshooting information is collected. Further messages, namely 'TCAM_MISMATCH_REPAIRED' and then 'TCAM_MISMATCH_COMPLETED', follow when the recovery and the data collection are completed, respectively.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-BPM_ROUTER_ID
### Response:
(Severity: 5), (Category: ROUTING), (Description: IPARM returned no valid router ID. This is due to lack of a global router ID or a loopback interface.), (Recommended Action: Try one of the following: 1) Set up a BGP router ID via the `bgp router-id' command in the `router bgp' configuration mode, or 2) Set up a global router ID via the `router-id' command in the global configuration mode, or 3) Set up a loopback interface with an IPv4 address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-ERR_HW
### Response:
(Severity: 4), (Category: L2), (Description: A hardware error is detected on the PLIM. Software will take action as described in the error message, if not none, to try to recover from the error. The hardware error and the software recovery action will not impact traffic. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error. Recommended user action: %s - recommended action to the user. Possible values: 'none' 'replace CFP' 'PLEASE MANUAULLY RELOAD THE LC AT NEXT MAINTENANCE WINDOW'), (Recommended Action: Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-MISSING_IDB
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT was supplied with a plim interface that does not have an idb yet.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of Install Manager in IOS XR?
### Response:
Install Manager in IOS XR controls the booting process on each node in the system and determines the proper packages that need to be loaded on each node. It provides the user with the CLI necessary to carry out install operations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_MVPN_ID_MISMATCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: MVPN ID Mismatch found.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-LC_EOBC_FAILED_BOTH_RSP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This line card has lost EOBC heartbeat to both RSPs), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_FRAME_ERR_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For UTI mode alarm is raised if frame error rate exceeds 2%.), (Recommended Action: 1) Ensure valid BITS/UTI signal is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-IDB_CTX_NULL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: While processing an ingress packet, the eint driver failed to find idb context), (Recommended Action: Collect console log and the following information and contact TAC support with this info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show process spp -show process netio -debug netio drivers location <loc> -show logging process spp <loc> -show logging process netio <loc> -show logging start [time of day when this msg was seen] -show netio idb all brief location <loc> -show netio trace all location <loc>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-INTF_DELETE_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: QMgr encountered an error during the de-allocation of queueing resources within a queuing asic as part of interface delete.), (Recommended Action: Interface delete failed. No action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_VKG-7-ERR_EDM_REGISTER
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-ASR9K library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-OOR_PROT_START_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a warning message in the DNX FIB to indicate the usage of the named resource has exceeded the maximum allowed and we begin OOR protection for the resource.), (Recommended Action: Reduce usage of the named resource if the issue is persistent.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-UNRELIABLE_INFO_MSG
### Response:
(Severity: 4), (Category: SECURITY), (Description: Received INFO message before peer has been authenticated that is why it is called unreliable.), (Recommended Action: 'Contact the remote peer's administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-HIGH_VOLTAGE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP voltage greater than or equal to the high voltage warning threshold. The CFP is the pluggable optics on the line cards. The voltage threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-5-PROCESS_UPDATE
### Response:
(Severity: 5), (Category: TOPOLOGY), (Description: System Admin Manager got notification from process manager about process/system health.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM-6-PAYLOAD_NOT_MULTIPLE
### Response:
(Severity: 6), (Category: L2), (Description: A value in class attach onto interface or controller not inherited.), (Recommended Action: No Action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-FANTRAY_DETECTION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process failed to detect the fantray prescence), (Recommended Action: Check fantrays are properly seated.If no try re-seating the fan trays. If Still the issue persist after re-seating collect the required info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOSS_OF_LOCK
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-6-NO_BUF_TO_REPLACE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPUCTRL RX PDMA ring could not replace the buffers. possible low buffer condition.), (Recommended Action: Check for packet memory particle allocation and usage with 'show packet-memory', 'show packet-memory inuse' and 'show packet-memory old'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XML_TTY-7-LOGIN
### Response:
(Severity: 7), (Category: MGBL), (Description: An internal error has occurred in the XML Dedicated Agent. The logint authentication (over dedicated) may not be able to complete correctly.), (Recommended Action: Retry the XML request that had the error. Transient conditions should have passed, and in all likelihood, this request will go through. If not, close this TTY session, and restart a new TTY session. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-INIT_FAILED
### Response:
(Severity: 4), (Category: MGBL), (Description: An error was encountered while the Central Configuration Validator (CCV) was initializing. Attempts to modify system configuration while the CCV is not running may fail. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_ATOM-7-DEBUG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB ATOM component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_MBE_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA11 channel FIFO multi-bit error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-ISSU_LOAD_DONE
### Response:
(Severity: 7), (Category: MGBL), (Description: 'ISSU install notification message for LOAD DONE Phase received'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an error to bind to admin plane sysdb server. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-6-START
### Response:
(Severity: 6), (Category: L2), (Description: Informational message indicating the ASIC SCAN is started.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-6-PACKET_DISCARD
### Response:
(Severity: 6), (Category: IP), (Description: IPV6_IO discarded a packet due to the indicated error.), (Recommended Action: Based on the error indicated, investigate the source of the and links for packet corruption or other errors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_1_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: SAM general error message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-3-GSP_EVQ_HANDLE_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: We are dequeuing an invalidly TAGGED message for transmission This should not cause failures of any kind, but probably does indicate an error in another part of the system.), (Recommended Action: Collect show tech sysdb and show tech gsp. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-MEMORY
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP ENA filesystem handler was unable to allocate the required amount of memory, as the HTTP process has run out of resources. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIB-3-NOMEM_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: The requested operation could not be performed due to a low memory condition.), (Recommended Action: 'Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-7-ERR_EVM_FAIL
### Response:
(Severity: 7), (Category: L2), (Description: An internal error was detected when trying to create EVM connection. It can fail during following scenarios: 1) EDM registration/connect/notify. 2) BAG's rule registration failed.), (Recommended Action: No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-6-LEAD
### Response:
(Severity: 6), (Category: TOPOLOGY), (Description: System Admin Manager has got notification about the lead selection as specified.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-ROUTE_HDLR_CERR
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in the L2FIB manager process. This could have occurred due to failure in receiving a valid route type for Multicast or EVPN. The message may not be delivered correctly if this error occurs. The error message prints the name of the route type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_UIDB-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational message. No action needed), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-5-PORT_MOVE
### Response:
(Severity: 5), (Category: IP), (Description: A port up message was received from an adjacency with a different sender name as compared to the sender name received from the previous port up message. The software has performed operation to associate this adjacency with the new sender name; however, it may not be the desired result, since duplicate ports could have been configured on external devices.), (Recommended Action: The configuration on the remote ANCP client should be evaluated for duplicate port circuit names on remote ANCP client devices.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVQ_CREATE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is an unexpected error. The PPPoE MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR_ASIC-4-JER_ILKN_PORT_DOWN
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. For ILKN port is in error state : This port is in error state due to errors on the link.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-6-INFO
### Response:
(Severity: 6), (Category: OS), (Description: Informational only.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-ATTACH_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to attach to plim interface .), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-UBLAZE_CPU_HOG
### Response:
(Severity: 4), (Category: DRIVER), (Description: CCC FPGA is indicating that the CCC MicroBlaze CPU is experiencing a 'CPU hog' type event, which indicates that a MicroBlaze main loop iteration took more than this 50 milliseconds. A typical main loop iteration time is 15 milliseconds, but having multiple tasks (SPI, I2C, Ethernet, console mappings, packet push, PON, etc.) to complete during the main loop may increase this typical time.), (Recommended Action: This is a performance monitoring type message, there is no action required for user to correct the situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CVAC-2-INIT_FAILED
### Response:
(Severity: 2), (Category: MGBL), (Description: The CVAC (Cisco Virtual Appliance Configuration) subsystem failed at startup and was unable to run successfully. The subsystem will attempt to run again after the next reload of the router.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-4-REIMAGE_INITIATED
### Response:
(Severity: 4), (Category: INFRA), (Description: ZTP has started loading the new image and router may get reload on completion.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-SYSDB_REG_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A fatal error was encountered during initialization.), (Recommended Action: If the process does not restart automatically then try manually restarting it. A likely cause for this error is that the system has run out of memory. If this is not an out-of-memory problem and restarting the process does not solve it then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-CHECKPT_MEM_RESTORE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Shelfmgr failed to restore its checkpoint memory on a process restart or transition from stby to act.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_DRIVER-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: Driver initialization error), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-MACSEC_POWER_STATUS_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This would be seen when there is insufficient power (or) failed to allocate power which required for running the port in MACsec mode (or) failed to release power on removing the macsec config from the port or by configuring macsec shutdown.), (Recommended Action: In case of insufficient power, delete macsec configuration from the interface and reapply only after adding adequate power modules. In case of failed to allocate power (or) failed to release power, contact cisco-support by sharing the tech-support macsec.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_BAG_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: EDM Bags are used to share information between components using sysdb. This Error indicates that bag registration failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_PROTECTED_FABRIC-4-MGID_RESYNC_END
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_AAA_ATTR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error using AAA attribute APIs. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_SEQ_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 1 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between a session-group and a neighbor-group in IOS XR BGP configuration?
### Response:
A session-group defines common session parameters such as timers, transport mode (TCP or TCP-AO), update-source, and so on. A neighbor-group defines common neighbor parameters such as remote-as, route-policy in/out, next-hop-self, and so on. A neighbor can inherit from both a session-group and a neighbor-group.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Ingressq driver failed to initialize the device resulting in the restart of the Ingressq driver process.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the ingressq driver is up and running by executing the following command at the CLI of the active RP: 'show process ingressq location < >' If it is still non-operational, enable the following debugs of the ingressq driver process: error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events and restart the driver by executing the following command at the CLI of the active RP: 'process restart ingressq location < >' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER-4-BUNDLE_MAC_ADDRESS_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: The bundle MAC address failed to be programmed as the MAC address is currently associated with another client (most likely HSRP/VRRP).), (Recommended Action: Check HSRP/VRRP configuration associated with this bundle interface or children subinterface for the unicast MAC address shown. If the unicast MAC address is configured, reconfiguration of HSRP of VRRP should be considered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ATTR_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the OFA FIB to indicate that engine layer identified an error with attribute padnxd by upper layers), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-WARNING_RT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Warning related to rate limitor in platform FIB), (Recommended Action: *DEBUG*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_CREATE_EVENTMGR
### Response:
(Severity: 3), (Category: IP), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-IMDR_ABORT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The IngressQ process aborted the iMDR upgrade.), (Recommended Action: Check for error logs from the imdr process to determine the exact cause of the abort. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-EVENT_CONN_DESTROY_FAIL
### Response:
(Severity: 6), (Category: ROUTING), (Description: During process termination IS-IS failed to destroy a connection to a service provided by another process. This is an internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-HOOPER_LINK_EXCESS_ERR_CLEARED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link on epm switch had excess errors, but now cleared), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-EA_IM_CAPS_RESYNC_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error during resync of QoS capsulations with IM.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface. 'interface <interface name>' 'no service-policy input | output <policy-name>' 'commit' 'serveice-policy input | output <new-policy name>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_FPGA-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The process failed to initialize. The Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_AIS_DEMB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-PWR_SEQ_MEMORY_FAULT
### Response:
(Severity: 4), (Category: DRIVER), (Description: A memory fault condition on indicated power sequencer device has been detected by CCC driver. Due to this fault, the card won't boot and the driver will now take recovery action by reprogramming the device and then power-cycle the card to recover.), (Recommended Action: No action is required as CCC driver is performing auto-recovery of this failure condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-6-K1K2_INFO
### Response:
(Severity: 6), (Category: L2), (Description: syslog msg to print K1k2 when switchover happens), (Recommended Action: No Action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-OOM_STATE_THROTTLE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes msdp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes msdp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. From the job ID obtained from the above command, please run the following command. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes memory <job id><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes memory <job id><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The requested operation could not be accomplished because of a low memory condition. This error could impact Linux/Application image download and Launch, Services PLIM IPC (Inter Process Communication) etc.), (Recommended Action: Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_BYTES_SEND
### Response:
(Severity: 3), (Category: OS), (Description: APS BYTES SENDING. It is applicable for Digi 20x10g and 2x100g Digi cpak cards.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-BAG_REG_ERR
### Response:
(Severity: 3), (Category: L2), (Description: L2VPN encountered a problem registering the data containers (bags) for show commands. The text of the message displays the decoded return code.), (Recommended Action: To recover from this state, one may try 'process restart' command. For example, - process restart l2vpn_mgr OR Collect 'show tech sysdb' and 'show tech l2vpn', and contact Cisco TAC support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR handle configuration failures during router startup?
### Response:
During router startup, if there are configuration failures, IOS XR boots with the last known good configuration instead of the latest changes. This ensures that the system comes up in a consistent state even if recent configuration changes caused issues.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-ISSU_OP_ABORT_STANDBY_REMOVED
### Response:
(Severity: 2), (Category: INSTALL), (Description: During ISSU operation, the specified standby node removal was detected by the install ISSU infrastructure and thus the current ISSU operation is aborted.), (Recommended Action: Please check the existence of standby node and retry ISSU. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-VOQ_RESET_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: Unable to program one ore more VoQs with the queueing parameters received for a remote interface. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Interrupt controller Event Manager event block error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-ERR_EVQ_DESTROY
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: During process termination PPPoE MA failed to destroy an event queue. The process will terminate regardless so there should be no lasting problems.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-1-BAD_XBAR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Persistent failure in serdes links to all connected linecards.), (Recommended Action: Please try powercycling the RSP board using command: 'hw-module loc <> reload'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE_MAIN-3-TRACE_BUFF_INIT
### Response:
(Severity: 3), (Category: L2), (Description: 'Trace buffer initialization failed .' 'Tracing will not be functioning properly.' 'Process will proceed running.'), (Recommended Action: 'Process restart can solve this issue.' 'If proplem exists even after process restart,' 'please collect the error log with return value' 'and core dump of the process and contact tac')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-4-SLOT_INSERTION_THRESHOLD_MINOR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Backplane slot connector has card insertions exceed threshold minor per current counter statistics.), (Recommended Action: Give CLI: (admin)# show plugin slot counts location <node> If possible, reduce the frequency of card insertions into this backplane connector. Current insertion counters may be cleared with (admin)# clear plugin slot counts)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-TRISHUL_FPGA_ACCESS_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-6-TYPE6_MK_INPROGRESS
### Response:
(Severity: 6), (Category: MGBL), (Description: Masterkey get failed because of Type6 masterkey update still in progress.), (Recommended Action: This is just an information. No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-FD_MAJ_LIM
### Response:
(Severity: 4), (Category: HA), (Description: A process is potentially leaking FDs. Major limit has been crossed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_DEBUG_REGISTER
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered an error to register debug facility and hence failed to initialize. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-4-ABORT_CLEANUP_TIMEOUT
### Response:
(Severity: 4), (Category: INSTALL), (Description: Quickstart Director did not recieve a notification from Quickstart Manager indicating abort cleanup was successful. Quickstart Director has made a best effort attempt to clean up any stale system resources and terminate any stale Quickstart Manager processes.), (Recommended Action: The reason for this qs operation failure has to be analyzed. Collect 'show tech-support qs' and forward the logs to the TAC. In addition, 'show tech-support' should be gathered for the process which requested the abort where possible. These logs should also be forwarded to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-LWM_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed to execute LWM library functions. In this scenatio OBFL will restart and recover by itself.), (Recommended Action: If the issue is seen even after multiple restart, Please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-FLASH_INIT_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Optics Driver Initialization failed for fpga flash. Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-7-HBLOSS_COLLECT_COMPLETED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Collection of heatbeat loss log has been completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: FIB couldn't allocate memory for some internal processing. It might be in an consistent state.), (Recommended Action: Check memory utilization on the card the error came for and take appropriate steps to reduce it. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_9
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt link failed), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a route policy?
### Response:
To configure a route policy in Cisco IOS XR, use the 'route-policy' command in global configuration mode. RP/0/RP0/CPU0:router(config)#route-policy POLICY1
RP/0/RP0/CPU0:router(config-rpl)#if destination in PREFIX_SET1 then pass
RP/0/RP0/CPU0:router(config-rpl)#endif
RP/0/RP0/CPU0:router(config-rpl)#end-policy
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-2-DPC_CALL_FAILED
### Response:
(Severity: 2), (Category: L2), (Description: Internal error. Might occur while distributing data path control to IM), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_1_PKT_MINLEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_DATA_EXTRACT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as data was being extracted for the registration of this attach point. As such, the registration failed and the verification of configuration related to this attach point registration will NOT be performed. Thus, configuration could be accepted but could be unable to be processed by the protocols.), (Recommended Action: Restart the policy_repository process to remedy this situation. If message appears again, please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_PCALC_FAIL
### Response:
(Severity: 5), (Category: ROUTING), (Description: Path calculation failed for the specified tunnel, destination, LSP and path option.), (Recommended Action: The reported path-calculation error may be investigated if desired. This is a solicited message (controlled by <CmdBold>logging events lsp-status pcalc-failure<NoCmdBold> configuration).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-4-RESTART_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The SVII Adjacency Manager encountered an error while preparing to restart itself. It will restart itself anyway, but there may be other errors.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-MONITOR_INTERVAL_ZERO
### Response:
(Severity: 4), (Category: DIAG), (Description: Health Monitoring cannot be enabled for the specified test because the interval for the test has been set to 0.), (Recommended Action: If you want the scheduling tests to be removed, do nothing. If you want the scheduled tests to still be run, reconfigure the scheduled tests.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
action-3-TESTMSG
### Response:
(Severity: 3), (Category: OS), (Description: This is a test message for ios error message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-ERR_VRFN_FNS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to initialize the handler functions for verification of changes to its configuration data.), (Recommended Action: Restart of EIGRP might solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-MAXMETRIC_RUNNING
### Response:
(Severity: 6), (Category: ROUTING), (Description: One of the following applies 1. maximum-metric LSA origination setting was changed while the maximum-metric origination was still active. The change will not take effect until the next time the system is restarted. 2. no-abr-off configuration was removed while in max-metric mode. The change will not take effect until the next max-metric event (process restart, migration or reload) is seen. 3. no-abr-off configuration was added while in max-metric mode. ABR-disable mode is exited immediately.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fatal internal error occurs, the process will be exited and this will recover automatically by restarting the mbi-hello process by software.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-SERDES_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected a serdes error on link 1.), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_EDM_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-BRM_BARRIER_SYNCUP_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: This may be a transient error seen if fabric components are powered down incorrectly. The system should recover from this error automatically. If the error persists, please contact TAC support.), (Recommended Action: Check Fabric health and look for any disconnects between the fabric stages. Make sure that the fabric planes are up. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-MAC_LIMIT_AC_SET
### Response:
(Severity: 6), (Category: L2), (Description: Number of MAC addresses in the attachment circuit has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-INVALID_RHDR
### Response:
(Severity: 7), (Category: OS), (Description: a function was invoked with invalid rhdr msg), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-SOCKET_BUFF
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Reading input on scoket from the client. %x- Value of the socket buff at index 0.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-5-WAIT_FOR_NP_UP
### Response:
(Severity: 5), (Category: PLATFORM), (Description: New NP(s) are detected and being brought up. The process is waiting for the NP to complete its bringing up sequence.), (Recommended Action: No action required. Optionally, one can use 'show controller np summary all location <>' command to monitor the NP states.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIPC-5-EM_DEBUG_INIT_FAIL
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Debug initialization failed within EM. Debugs may not be printed), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-BRINGDOWN_REQUEST
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The reason should be supplied in the IOS msg itself, but basically this msg means that shelfmgr is shutting down a node because a process specifically requested it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the command to install an optional package (PIE) in IOS XR?
### Response:
To install an optional package, use the `install add` command followed by the package name and location. For example\n```\nRP/0/RP0/CPU0:router# install add disk0:/hfr-mpls-p.pie-3.6.0\n```\nThis command unpacks the PIE and makes it available for activation.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng fast-reroute protect' command in IOS XR?
### Response:
The 'mpls traffic-eng fast-reroute protect' command is used to enable MPLS TE Fast Reroute (FRR) protection for a specific interface. When enabled, this interface can be used as a backup tunnel for protecting primary TE tunnels. FRR provides rapid traffic recovery in case of link or node failures by locally repairing the LSPs at the point of failure.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'vrf' command in IOS XR?
### Response:
The 'vrf' command is used to configure a Virtual Routing and Forwarding (VRF) instance. VRFs are used in MPLS L3VPNs to maintain separate routing and forwarding tables for each customer. Each VRF has its own set of interfaces, routing protocols, and forwarding policies.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-MTP_MODE_DETECTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-REG_ACCESS_FAIL_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Register access failure on bridge instance-0.), (Recommended Action: Please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-2-ENFORCE_EVAL_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature has been used exceeding the evalution period.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_PKT_F1_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 1 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-CONSUMER_ENS
### Response:
(Severity: 3), (Category: MGBL), (Description: One or more ENS or NRS APIs has returned a failure. The failure happens while the consumer is calling the ATM VCCLASS client APIs. Internal failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-DEBUG_INITFAIL
### Response:
(Severity: 7), (Category: SERVICES), (Description: A failure occurred during the initialization of the debug infrastructure.), (Recommended Action: Debug are used to debug cgn_ma in case of functionality issues. This will not impact CGN_MA in any form.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-4-VM_REACTIVATE_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: VM activate/deactivate status.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-7-DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_BCM8705-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-STATE_CHANGE_TO_SYNC
### Response:
(Severity: 5), (Category: IP), (Description: when the node state change to insync with the ntp server.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_IO-3-OPTION_UPDATE_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The ipv4_io process encountered a software error while creating an entry in the option registry requested by an application), (Recommended Action: IPV4 IO could not update option registry information consistently across all of its instances. This could result in unexpected behavior with respect to some option packets. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-4-LOG_WARNING_OWNER_PLANE
### Response:
(Severity: 4), (Category: OS), (Description: A warning owner plane message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-LINK_ANOMALY_CLEAR
### Response:
(Severity: 6), (Category: ROUTING), (Description: ISIS was notified that a previous link anomaly condition on the specified interface no longer exists and has reset the per-level link metric to its normal value.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-INVALID_PATH
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_DEBUG
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB was unable to initialize the debugging services. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-INTERNAL_NULL
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent has passed itself a NULL pointer when it should not have done - this point in the code should not have been reached. The HTTP process may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-FTRUNCATE
### Response:
(Severity: 3), (Category: MGBL), (Description: The packet subsystem was not able to initialize memory.), (Recommended Action: The router will not start properly with this condition.\n' 'Call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_CORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE correctable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to terminate a configuration session without committing changes?
### Response:
To terminate a configuration session and discard uncommitted changes, use the 'abort' command in configuration mode. RP/0/RSP0/CPU0:router(config)#abort
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabricq LWM reply error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE0_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE0_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_INACTIVE_AF
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified event was unexpected because the address family is not active on that interface. The operation of IS-IS is not affected by this message and it may safely be ignored. The message is due to an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-CLIENTID_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: Specified client ID caused an error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-SYSCALL1
### Response:
(Severity: 7), (Category: HA), (Description: A system call failed. The calling function,Line number the failed call, and error are displayed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PREF_COMPR_LIB-6-NOT_APPLICABLE_2T
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: v6 source prefix compression is not required on 2T card.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-4-RAM_ECC_1BIT_THRESH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Threshhold reached for single bit ECC (Corrected) errors.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-CHUNK_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while initializing Queue memory for FGID This may be due to memory availability), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: L2), (Description: BFD Agent has failed to allocate memory for its resources. This would affect proper functioning of BFD Agent.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-5-ERR_SYSDB_INIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The MFWD-HFR library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-MPA_NP_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates MPA showdown failed as corresponding NP cleanup failed), (Recommended Action: No action is required for this message. If any issues are observed in subsequent MPA reload, pls copy the error message exactly as it appears on the screen and gather the output of the CLI 'show tech-support ethernet interfaces', 'show qoshal trace location <>', 'show prm server trace init location <>', 'show prm server trace error location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-ASIC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Some ASIC error has occured and ltrace initialization will fail), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-3-ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: ACE Driver Fatal Error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC-3-DBG_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An debug init/fractL call failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-POTENTIAL_DEADLOCK
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected the potential for a deadlock to occur. The process will be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-2-ERR_EIO_TRAIN
### Response:
(Severity: 2), (Category: FABRIC), (Description: An attempt to train the EIO links to the neighboring Asic have failed. The ingressq driver retries the eio link training. If this error is seen repeatedly, please contact TAC support.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR computational enhancements feature?
### Response:
The MPLS TE FRR computational enhancements feature optimizes the calculation of backup tunnels to improve scalability and performance. Techniques include incremental SPF (iSPF), backup path calculation throttling, and the use of a TE backup SPF (BSPF) algorithm. These enhancements reduce CPU overhead and allow FRR to scale to a larger number of protected tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-6-DDT_BAD_XTR_NONCE
### Response:
(Severity: 6), (Category: IP), (Description: 'An xTR issuing LISP Map-Requests includes a nonce value ' 'in each request. The xTR must use a different nonce value ' 'for each Map-Request for a new EID prefix. The identified ' 'xTR has sent us two Map-Requests, each for a different EID ' 'prefix, and they both carried the same nonce value. ' 'When querying the DDT hierarchy, duplicate nonce values ' 'prevent the DDT resolver from associating received ' 'Map-Referral messages with the correct request. To protect ' 'against this problem the DDT resolver has dropped the ' 'second of the two received requests.'), (Recommended Action: 'Contact the operator of the ITR that is issuing ' 'the Map-Requests so that they can fix the problem ' 'by upgrading their system.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERR_INFO_TWO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP_DEBUG-6-REGISTER_FAILED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MVRP-4-INITIALISATION_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: The process will automatically exit and will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP fast external fallover feature?
### Response:
By default, if a directly connected eBGP peer goes down, BGP waits until the hold timer expires to tear down the session. The fast external fallover feature immediately resets the session if the interface to the eBGP peer goes down, without waiting for the hold timer.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REPLACE_COMMIT_PRECHECK_FAILURE
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install commit as part of the replace operation couldnt be started as failures are seen during the precheck phase.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-REG_MISMATCH
### Response:
(Severity: 7), (Category: HA), (Description: An application is trying to register for its table. A table with the same <name, version> exists, but other attributes have changed, so the table is not allowed to be used.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-6-IM_IFTYPE
### Response:
(Severity: 6), (Category: L2), (Description: An info regarding the type of interface/VC from interface manager corresponding to the main idb. first %s - Happened at second %d - decimal number for the iftype), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-6-SESSION_STARTUP
### Response:
(Severity: 6), (Category: MGBL), (Description: The TTY Session startup found some error. Error is ignored and console will be activated.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_EVM_SEND
### Response:
(Severity: 4), (Category: L2), (Description: SSRP failed to send the specified message. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the affected PPP MA process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-2-CE_SWITCH_LINK_STATE_CHANGE_FATAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The internal link interface for the specified port is down.), (Recommended Action: The board would get reloaded. On reload of board, run following commands from RSP ksh to decode PCDS information - pcds_decode -c NIANTIC <.pcds file>. If users has auto reset option disabled in admin config, then the board would not get reloaded on its own. At this stage collect the output of (admin)'show tech-support control-ethernet location <nodeId> file outputFile')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET1_INTR_CRC32_CHK_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET1_INTR_CRC32_CHK_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TRANSPORTTCP-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize or shutdown the debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-6-INFO_RSYNC
### Response:
(Severity: 6), (Category: MGBL), (Description: See the man page of rsync for further detail on these errors. Some of these may be fixable/transient, and others might point to a deeper issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A critical error occurred in OPTICS Driver which involves exiting the process.), (Recommended Action: Power cycle the plim.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_GSP_SEND_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering for sysdb_mc gsp send msg size stats failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_HW_OFFLOAD-4-CONFIG_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: BFD HW offload not supported on this node, disabled it), (Recommended Action: Execute 'no hw-module bfd-hw-offload enable loc <>' to remove the config for config consistency)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-CPLD_POWER_CTRL_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The Fabric PLD power fault alarm was encountered), (Recommended Action: A power fault has occurred.If the fault has occurred, node will be shutdown. Please collect logs mentioned in required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-POWERUP_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power up has failed, this may be a program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-EEPROM_READ_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The read of the eeprom to fetch card_type for the given node has failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZEN-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The board might have bad flash part that need to be replaced), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-EMWEB
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP ENA filesystem handler was unable to carry out an EmWeb server function. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-BIOS_FATAL_EVENT
### Response:
(Severity: 3), (Category: DRIVER), (Description: BIOS has reported a fatal event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCT_STOP_REC_FILE_WRITE_FAILED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when acct stop rec write to file failed.), (Recommended Action: Check the harddisk space. Try disable and then enabling the accounting stop storage feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-REQUEST_REG_SEND_ERR
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB server is unable to function due to a problem with a piece of infrastructure. The only hope of recovery is to restart. If the problem persists, the card will be automatically reloaded.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV4_EA-3-FAILURE3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an failure message in the ASR9K platform specific code software to indicate anomolies that are not serious FAILURE. This Failure is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect console log, traces * SH_CMD show af-ea ipv4 trace errors loc <slot number> * Also notice if the failure message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT_FIFO_OFLOW_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt fifo overflow on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-EMPTY_SERIAL_BOOT_OVERRIDE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This informational message informs the user that the Shelfmgr discovered an empty serial number due to an older ROMMON format, but it will allow the RP to boot because the operator had configured to override the restriction of disallow booting a RP with empty serial number.), (Recommended Action: Please upgrade the booting RP to the latest recommended ROMMON.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-2-SDK_INCOMPATIBLE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Current SDK and Morgoth version is incompatible. Please upgrade/downgrade Morgoth to the sdk compatible version or use sdk image which is compatible with the running Morgoth version.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-LM_DRAIN_QUEUE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Unable to drain all the cells from a given queue. This may cause barrier timeouts once the queue is re-enabled. Hard resetting Asic'), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-MPLS_ENCAP_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: In lspnh create/update, adding path encap failed due to ENCAP Table OOR .), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_MPLS-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Platform MPLS FIB, error), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|mpls] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-SPUR_INTR
### Response:
(Severity: 3), (Category: FABRIC), (Description: An interrupt is generated but the interrupt status register indicates no pending interrupts. This may be due to a hardware error where the interrupt line is stuck in its active state i.e. active low.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_BASE_NAME
### Response:
(Severity: 3), (Category: OS), (Description: The name could not be used.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-UNEXP_PULSE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A pulse was received by SPP from the OS or another process, but no handler was registered to take appropriate action. This indicates a problem with SPP if the pulse was received from the OS, or another process which sent the unexpected pulse.), (Recommended Action: Restarting the process may help to resynchronize the system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-ACTIVE
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message reporting that a link has entered or left Active state as part of a bundle interface. The link configuration may have just been changed or there may be an operational reason for the event such as a state change or LACP protocol update.), (Recommended Action: Nothing, this is not an error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key properties of Cisco IOS XR software components?
### Response:
Cisco IOS XR software components exhibit the following properties\n- Functionality that can be individually developed, released, and upgraded on running systems without affecting other software components\n- Executable code for running a process or libraries that are shared between different processes\n- Well-identified functionality (e.g., ipv4-bgp, ipv4-acl, ipv4-mrib components)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IXDB-4-RECOVERY
### Response:
(Severity: 4), (Category: SYSDB), (Description: The low level ixdb database has recovered after a process restart. Upper layers must recover from a potentially incomplete bulk operation as well as any application data inconsistency within ixdb. Ixdb only recovers its own state.), (Recommended Action: NONE. The router will attempt to recover automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-DISK_ALARM
### Response:
(Severity: 4), (Category: HA), (Description: Set: When some monitored disk's usage is above 80%. Cleared: When all monitored disks' usage are below 80%.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-MC_HI_OVR_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast high priority fifo overflow error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: CARD_MGR Driver Initialization failed. Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-XIF_RQFF_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected XIF RQFF memory multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-FAULT_NOTIFICATION
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered when trying to generate a fault notification for a local MEP, as a result of a defect detected from a peer MEP. This will mean that the corresponding SNMP trap will not be raised. If the error persists, CFM may not operate correctly.), (Recommended Action: If the error persists, it may be cleared by restarting the cfmd process on the node where the error is occurring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-4-WP_INFO
### Response:
(Severity: 4), (Category: L2), (Description: State change in the APS group internal communication system detected. Expected during transitory conditions at config changes, OIR, etc. The message contains info about the WP communication components affected.), (Recommended Action: Verify continued correct operation of SONET APS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-3-EVENT_MANAGER_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Event manager could fail if system resources (eg: memory) is not sufficiently available for use.), (Recommended Action: If it is related to process-level resources, restarting the type6 server process (type6_server) using the command 'process restart type6_server' might solve the issue. For further detail contact the Cisco technical support representative with the gathered information and the exact error message as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-4-FAIL_ERASE_RBT_HIST
### Response:
(Severity: 4), (Category: MEDIA), (Description: Failed when erasing the corrupted reboot info.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-FM_ADD_IFH2GRP
### Response:
(Severity: 3), (Category: OS), (Description: An internal fm add ifh to group function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SERVER-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE_ERR_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE_ERR_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. This condition could occur due to broken pins/components/clock or ASIC init errors (either NPU or FIA init errors). If hardware is inspected to be clean and no physical damage, environmental factors like temperature might be factor for this error. Wait and check if errors get resolved. If errors are consistent, take actions like checking temperature of the box, if high address it. Check for any initialization errors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_QS_PREP_DONE
### Response:
(Severity: 1), (Category: INSTALL), (Description: The Quickstart prepare operation has completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-SYSMGR_REGN
### Response:
(Severity: 3), (Category: OS), (Description: Unable to register with sysmgr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysmgr<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysmgr<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Interrupt controller Event Manager notify error), (Recommended Action: Please attempt to correct the error by restarting the process. Issue the command in exec mode -process restart longbeach If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-7-DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: For debug only.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-INIT_SYSDB_REG_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Process failed to register for SysDB verification while applying encapsulation config. This could be due to the invalid arguments or memory allocation failure for which there is no current handling, therefore system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-BOGUS_LINKPOINT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Bogus link point'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKPLATFORM-6-SENDFAIL
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The platform driver was not able to send data to the packet manager. This could happen when the platform driver is trying to send the initilization information to the packet manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_LQ_OFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 0 LQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_MEM0_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR MEM0 Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-UNSUPP_TX_NON_CH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects an unknown error on a pod. The pod might not be functioning properly, and can cause cell drops, or corruption from received cells. There can also be a software bug such that the error is not handled), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-2-SYSMGR_REGISTER
### Response:
(Severity: 2), (Category: HA), (Description: API for registering node state change with sysmgr failed. This change will be registered later.No impact on running of process.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-NO_POWER_SFPPLUS
### Response:
(Severity: 6), (Category: L2), (Description: There is not enough available power on the PLIM to power on the SFPPLUS.), (Recommended Action: Remove the SFPPLUS from the given port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LOW_VOLTAGE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP voltage less than or equal to the low voltage warning threshold. The CFP is the pluggable optics on the line cards. The voltage threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP_GMP-4-WARN_EVENT
### Response:
(Severity: 4), (Category: IP), (Description: An error occured while the ARP GMP was waiting for events. In this situation the process will terminates and restarts.), (Recommended Action: In this case the process would restart and will recover by itself. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-MOD_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Module Init failure due to faulty optics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - show tech-support ethernet interface location <> - show controller <> phy - show controller <> internal)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NCD-3-PAK_CSUM_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: A checksum error was detected for a packet by NCD.), (Recommended Action: The clients of NCD will attempt to recover from this situation by retransmitting the packets. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-SWITCH_FDB_FLUSH_WHILE_AUQ_FULL_TRIGG_WA_SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process issued a FDB flush operation while the AUQ was full. When this occurs a secondary AUQ is enabled to avoid FDB flush operation failure.), (Recommended Action: No action is required from the operator. This is informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-4-MIPC_NOTIFY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: TLU received notification from MIPC due to unrecoverable error or invalid address. client downloads the entire table to hardware as a recovery mechanism. This is an informational message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SERVICE_EA-3-ERR_PRM_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to set up connection with PRM server process.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-INVALID_PORT
### Response:
(Severity: 4), (Category: DIAG), (Description: A diagnostic request is being made on a port that does not exist.), (Recommended Action: Ensure the specified port number exists and that the correct port number is being specified.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBINST_DEBUG-4-INTERNAL
### Response:
(Severity: 4), (Category: INSTALL), (Description: The Install infrastructure has reached an unexpected state. Operations will continue, but the logging and debugging capabilities of the Install infrastructure may not function as expected.), (Recommended Action: It only impacts logging and debugging and has no impact on the functionality of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-ERR_INFO_VERBOSE
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. It provides more verbose information. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> show cef platform trace ipv6 all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-TIMEOUT_IGNORED
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-SRMS_LOOKUP_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: SRMS lookup to get the prefix sid for bgp prefix failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encounterd some error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-2-NOMEMORY
### Response:
(Severity: 2), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_LONG_PKT_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress long packet detected on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-BFD_BIND_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to connect to the BFD server. The connection will be retried.), (Recommended Action: This failure may be due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-INTERNAL_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A non-fatal fault occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-THREAD_PRIV_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: Internal debugging message.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-NOSPACE
### Response:
(Severity: 3), (Category: MEDIA), (Description: nvram full), (Recommended Action: Delete unwanted files)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-CONNECT_GSP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Connection to GSP failed.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-7-VERIFY_APPLY
### Response:
(Severity: 7), (Category: OS), (Description: A sysdb verify/apply callback information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV6_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-4-DEV_LATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Errors seen on the device bus. A reason text will be supplied.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-RADIUS_USER_AUTHEN_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: AAA user authentication faild.), (Recommended Action: 'Make sure you use the correct username and password, otherwise contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. with the exact log message received')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the command to enable OSPFv2 on Cisco IOS XR?
### Response:
To enable OSPFv2 on Cisco IOS XR, use the command 'router ospf <process-name>' in global configuration mode. The process name is a unique alphanumeric string identifying the OSPF routing process.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LWMESS-7-CORRUPT_CLI
### Response:
(Severity: 7), (Category: OS), (Description: A corrupt memory area was discovered in an internal data structure), (Recommended Action: This is an internal error and should be reported to TAC. Take a memory dump and try re-starting the offending application.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-FATTACH
### Response:
(Severity: 4), (Category: OS), (Description: An ionotify call to request file-state notification failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. This is an internal error and should be reported to TAC. The server process for the failed fd has died or there is a connectivity failure. If it can be determined which server failed, it and the application with the ionotify error should be restarted. If that fails, the router should be rebooted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GE_DMAC-6-UPDN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link in the RSP control plane MAC has change state.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers ge-dmac device <interface> detail location <loc in msg><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers ge-dmac device <interface> detail location <loc in msg><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you discard unsaved configuration changes in IOS XR?
### Response:
To discard unsaved configuration changes in IOS XR, you can use one of the following methods: (1) exit configuration mode using 'end' or 'exit' commands, (2) use the 'abort' command to discard changes and release the configuration lock, or (3) use the 'clear' command to reset the configuration session.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAGT_SERVER-4-EN_ACCURACY_UNSUPPORTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The system timing has switched to enhanced accuracy mode as a result of applying the 'timing-accuracy enhanced' configuration. This line card does not have hardware support for enhanced accuracy mode and the timing behaviour of line card will be undefined if the system continues in this mode.), (Recommended Action: Replace the line cards in the message with the ones that support enhanced timing accuracy, or remove the 'timing-accuracy enhanced' configuration and reload the router for changes to take effect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-INIT_ERR_STR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization, causing the process to terminate.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PR_INTR_PR_BA_PROTOCOL_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PR_INTR_PR_BA_PROTOCOL_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_RDLOCK
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-NOMEMORY
### Response:
(Severity: 3), (Category: INSTALL), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_BOARD_FAULT
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabric board is not operational due to the indicated fault. This information is extracted from the fabric PLD registers.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel selection metric feature?
### Response:
The MPLS TE tunnel selection metric feature allows the configuration of the metric type to be used for tunnel path calculation and selection. The default is to use the TE metric which is carried in TE LSAs. Alternatively, the IGP metric can be used which is the normal OSPF or IS-IS metric. This provides flexibility in optimizing tunnel paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialization of trace functionality for exec shell failed. This would affect the debugging of exec shell.), (Recommended Action: Try logging out and login again. If the message appears again, copy and save the message. Collect show logging output and any other suspicious error messages on console and inform technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPA_BRIDGE_REMOVAL
### Response:
(Severity: 4), (Category: L2), (Description: Failed to remove a SPA bridge controller), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_UNF_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA01 Tx underflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-DEPRECATED
### Response:
(Severity: 4), (Category: IP), (Description: 'LISP will be discontinued in IOS-XR.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LMRIB_API-3-GEN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred in lmrib client lib.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_ACCESS_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-5-TIMEOUT_EXIT
### Response:
(Severity: 5), (Category: HA), (Description: A process with an event manager that was not sending heartbeats has exited.), (Recommended Action: The debugging information collected when the event manager stopped sending heartbeats should be examined and provided to technical support for analysis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-0-LC_NP_LOOPBACK_FAILED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This line card has detected a problem with the packet punt and injection path between this line card CPU and some network processor(s), and the consecutive failure count has reached or crossed the failure threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-SEND_FAILED
### Response:
(Severity: 7), (Category: LIBRARY), (Description: An error was returned from RDS when trying to send an update. Clients will handle this condition differently either by retrying later, or failing the operation. If this condition persists, data may be lost on failover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NFEA_PAL-1-FLOWEXP_LIMIT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The number of flow exporter support in hardware is limited. The config has resulted in exceeding this limit.), (Recommended Action: Remove the configured exporter from the flow monitor.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-BAD_SEQNO
### Response:
(Severity: 7), (Category: HA), (Description: The mirroring request had an incorrect sequence number. This indicates either an algorithm error, or data corruption on the active node or in the data transfer between nodes. Initial Data Transfer will be redone, and no data loss should occur.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-CRS8_B_FANTRAY_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CRS-8-LCC-B chassis is runing with different types of fan trays. Please check the fan tray and make sure both are of same type.), (Recommended Action: Please check the fan tray type and make sure both are CRS-8-FANTRAY-B Fan Tray if fan tray mismatch is detected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-NULLCHUNK
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-0-CHASSIS_SHUTDOWN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Chassis is shutting down due to reason mentioned.), (Recommended Action: Examine chassis based on above message. If chassis shutdown is due to low voltage on both power shelves, then please examine the battery and replace if necessary. Note that in all cases of shutdown, the chassis needs to be manually power cycled, or the RPs physically OIR'd so as to boot the chassis again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET_LOOPBACK-3-UIDB_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize UIDB connection in the platform Ethernet loopback component), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-ERR_PROTO_INIT
### Response:
(Severity: 3), (Category: IP), (Description: IPv6 Protocol failed to intialize the netio datapath.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-POLICYCONFIG
### Response:
(Severity: 4), (Category: ROUTING), (Description: A problem was encountered while setting up route policy configuration. Some of the routing policy may not have been configured correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-BADAREA
### Response:
(Severity: 4), (Category: ROUTING), (Description: The system received an OSPFv3 packet with an area ID that does not match the area that the interface belongs to.), (Recommended Action: Check the OSPFv3 configuration of the receiver and the sender for inconsistency. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR_ERR-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Crossbar driver encountered an Error in operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-PULSEQ_STATE_CHANGE
### Response:
(Severity: 6), (Category: HA), (Description: This message is emitted when system pulseQ state switches between Normal/Minor/Severe/Critical states), (Recommended Action: If system changed to severe/critical alarm should be generated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_BAT_FAL_B
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Shelf Battery Failure B alarm occurs when battery B is down or not detected. This could be because the battery is removed or is not operational.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-4-AVLBL_MTU_MISMATCH
### Response:
(Severity: 4), (Category: IP), (Description: Minimum IPv4 MTU must be 68 bytes. Available link MTU is below the minimum IPv4 link MTU (68). IPv4 may not work correctly on this interface.'), (Recommended Action: Adjust the lower layer mtu such that atleast 68 bytes is available to IPv4. If the lower layer mtu is big enough collect the output of show tech-support, show ipv4 ma trace, show im trace, show im chains, show ipv4 interface for the interface for which the above error is seen. Try unconfiguring/reconfiguring the interface if the lower layer mtu is big enough and still the error is seen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_ETH_MGMT-3-NETIO_EVM_CREATION_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error detected when creating the netio event manager. process will restart automatically to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-4-TYPE6_MASTER_KEY_UPDATE
### Response:
(Severity: 4), (Category: SECURITY), (Description: radius configs are migrating due to change in the Type6 Master key. radius configs will not work during this migration.), (Recommended Action: This is just a warning message and No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-IGPTE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error encountered while attempting to use the IGP_TE Library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all - show running-config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_TS_UPDATE_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Timestamp update error on NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-IMG_LAUNCH_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in launching Linux/Application image. Cause of the error will be mentioned in the message displayed. This error prevents Services PLIM from coming up to its full functional Active state.), (Recommended Action: Do cold reboot of Services PLIM MSC If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_IPC-3-OPERATION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates failure in any of the process initialisation like installing or downloading the image gets failed, failed to allocate memory or any failure in service engine.), (Recommended Action: Please collect the console log and CLI output. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show cef show cef location <> show cef trace location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700-3-TRACE_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CPU Control driver failed to initialize the LTrace facility. The effect is that the CPU Control driver debug trace facility is not functional. This means that trace information used by Cisco support to help isolate CPU Control device issues may not be available. This does not impact normal CPU Control device operations. Note that it is unlikely that this failure would occur by itself. This failure is generally indicative of a larger LC-wide problem.), (Recommended Action: This error is unlikely to occur by itself nor is it likely to be the root cause of the problem. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_SOCK-3-ERR_SYSMGR
### Response:
(Severity: 3), (Category: L2), (Description: The process was initialized successfully but was unable to inform System Manager of the success.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-PROC_CNT_MINOR
### Response:
(Severity: 3), (Category: HA), (Description: When number of processes has crossed above MINOR Threshold Percentage.), (Recommended Action: The number of processes running has increased. Determine if there are any unnecessary processes available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-3-CFLCT_NOT_FOUND
### Response:
(Severity: 3), (Category: IP), (Description: An IP info structure with conflict flag set is not found in the conflict database. This is an error condition indicating IP ARM database has erroneous information. This can cause some unexpected behavior relating to the ip address not found in the database.), (Recommended Action: Collect the output of show tech-support, show arm [ipv4/ipv6] trace and the steps that lead to this behavior.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_CLEAR_TABLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an error re-installing routes in the RIB after receiving a 'clear table' event.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-CONFIG_DOWNLOAD_FAILED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Failed to download the config file to the Running config'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-MAXIM_ALARM_RAISED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power Sequencer failed alarm indication received from CBC. This may be a serious failure however process may continue functioning if failure was transcient.), (Recommended Action: Provide the following CLI: (admin)# show env Use the pid from canb-server output to look for matching pid in the pfm output. If the alarm indication does not clear within 30 minutes, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-UNEXPECTED_VM_ADDR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PDMA expected mmap_dma_memory to low address, but got high address.), (Recommended Action: Check the memory usage of the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEAT_MGR-3-DENY_IN_ACL_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Deny' action for an ACE is not supported and will be ignored. The behavior will be the same as with Permit action.), (Recommended Action: If the behavior is not acceptable, remove the Qos policy from the interface, otherwise no further action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-TLC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred in MRIB TLC operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-1-UPGD_SKIP
### Response:
(Severity: 1), (Category: DRIVER), (Description: card_mgr has detected on this PID the running BB IOFPGA version on the box is not, compatible with the CPU-IOFPGA. Hence it is recommended to upgrade BB-IOFPGA first before going for CPU-IOFPGA upgrade in order to avoid bricking of te box.), (Recommended Action: In case the operation fails please collect logs 1. Syslogs 2. show tech card-mgr 3. show tech fpd 4. show tech obfl 5. show tech shelf-mgr 6. show tech ctrace 7. show tech fpd-serv)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_ENS_LIB
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver ENS client library initialization error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-PKGFS_INIT_BOOT
### Response:
(Severity: 4), (Category: INSTALL), (Description: Could not update the package file system's list of active files.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CLOCK_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a clock failure on some bus/port), (Recommended Action: Please check the source of the external syncE clock. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_BRST_SHRT_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA11 Tx burst short error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-MACSEC_MODE_CFG_CHANGED
### Response:
(Severity: 3), (Category: L2), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in line card has already started the phy initalization process before this config is received. Needs attention with chassis line card reload.), (Recommended Action: System NODE is inconsistent. Need to reload the NODE for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_6_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-IM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Error in interface manager operation. Ex: Connection to Interface Manager not getting established, or some IM API errored out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM_COMMON-3-BAD_CLASSIC_CONFIG_COMPRESS
### Response:
(Severity: 3), (Category: MEDIA), (Description: Decompress of Compressed Classic Config Failed), (Recommended Action: If need to use classic configs, boot an appropriate classic image and rewrite the config. If not No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can a default route be originated in BGP?
### Response:
A default route can be originated in BGP in two ways\n1) Using the default-information originate command, which will originate a default if one exists in the routing table.\n2) Using the neighbor default-originate command, which will originate a default to a specific neighbor unconditionally.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV_AGENT-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The process exited due to the reason mentioned in the message.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-PMBUS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PMBus Failure/Success while accessing device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_TO_DDR_PAR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP to Tx DDR FIFO parity error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-MEM_ALIGN
### Response:
(Severity: 4), (Category: OS), (Description: Core dump failed because the pending segment flush failed.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-IM_CAPS_RESYNC_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error during resync of QoS capsulations with IM.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then re-attach the policy to the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_OOR-4-MGID_COUNT_OOR_ABOVE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-5-PEC_REMOVED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The expansion card was removed with serial number.), (Recommended Action: None, informational purpose only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Configuration File System (CFS) in IOS XR?
### Response:
The Configuration File System (CFS) in IOS XR is a virtual file system that stores the running configuration, committed configurations, rollback points, and configuration templates.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_SIM-7-BAD_NVRAM_VAR
### Response:
(Severity: 7), (Category: MEDIA), (Description: Could not allocate memory for a DRAM buffer), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-STATUS_UNKNOWN
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: bfm encountered an error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational Topaz LC Kensho-GL CPU Subsystem DLL message.), (Recommended Action: Nothing. Reporting normal progress of Topaz LC Kensho-GL CPU Subsystem DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_CHANNEL_DOWN
### Response:
(Severity: 3), (Category: FABRIC), (Description: Every qlink RX channel is connected to one fabricqrx link. Down channel will also bring-down corresponding fabricqrx link. This qlink channel has hit errors but it cannot be reset as it drives clock to that qlink. Resetting this channel will reset the clock also, so all other links in this qlink will go-down which in-turn will cause the fabric plane to flap.), (Recommended Action: Do graceful recovery by card reload or shut and unshut of plane correspond to down link.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-NOMEM
### Response:
(Severity: 3), (Category: SNMP), (Description: The system might be running low on memory and adequate amount of memory was not available to complete the request), (Recommended Action: If this message is persistent, check memory usage Try to have sufficent memory conditions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-4-SYSDB_BIND_CONN_IN_USE
### Response:
(Severity: 4), (Category: SYSDB), (Description: The caller of sysdb_bind() API in the traceback passed the connection variable that is already in use.This is a defect in the code which might lead to memory corruption or crashes at times.The caller of sysdb_bind API should fix their code.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-3-DIAGS_INIT_FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: A failure occurred attempting to initialize ISSU diagnostics. The relevant process will restart and attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_svr-3-INTERNAL
### Response:
(Severity: 3), (Category: OS), (Description: The server has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_MEM_FAIL_1
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE-3-ERR_SHMEM_UNAVAILABLE
### Response:
(Severity: 3), (Category: L2), (Description: BM-Local has requested transfer of more interface records than shared memory can accommodate), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: L2), (Description: ASIC scan server has failed to create the event manager. This would result in the automatic restart of the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_10
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-SHMWIN_RESET
### Response:
(Severity: 6), (Category: L2), (Description: The CFM shared memory window is being reset. All shared memory data will be lost. This means that all per-interface, per-MEP and per-peer-MEP counters are reset to zero.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_PARENT_ENT_DOUBLE_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Received a double delete for the removal of parent bpm entity on the child bpm entity.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP maximum PDU length?
### Response:
To configure the maximum PDU length for LDP, use the 'max-pdu-length' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#max-pdu-length 1500
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-4-SCRIPT_WARNING
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An internal syntax error was detected in the script file. The current line was skipped and the execution of the script continued.), (Recommended Action: Check the script for the skipped or ignored line. Make syntax changes as needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Malloc failed for ssm process. Check if node is in low memory condition.), (Recommended Action: Collect show tech ssm. Collect show memory summary location <node>, show process memory location <node> ie. for node where error is seen 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-BAD_LISTENER_TAG
### Response:
(Severity: 3), (Category: OS), (Description: Packet is received with unknown listener tag, hence dropping it.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_NETIO-3-INIT_TRACE
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of tracing for the NetIO caps. This will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-4-PCIE_FATAL_AER
### Response:
(Severity: 4), (Category: INFRA), (Description: A fatal PCIe error was reported to the Ethernet Switch Driver by the hardware on one of the PCIe links between the Ethernet switch and its upstream PCIe bridge.), (Recommended Action: No action is required from the operator. The Ethernet Switch Driver initiates a reset recovery sequence to reinitialize the Ethernet Switch hardware to a functional state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOSHAL-6-QOS_MODE_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'Any change in qos mode requires the LC to be rebooted to take effect.'), (Recommended Action: hw-module location <line-card-location> reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-PHY_ACCESS_PERSIST
### Response:
(Severity: 3), (Category: L2), (Description: Software could not access the PHY device during port initialization.), (Recommended Action: The physical port has been disabled and cannot be used. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-STARTUP_ALTERNATE
### Response:
(Severity: 6), (Category: MGBL), (Description: Configuration Manager is displaying a message during boot time to indicate an alternate configuration will be restored during the router boot operation. The alternate configuration is specified by the user by using a boot option or ROMMON variable setting.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-ENTRY_NOT_EXIST_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Attempt to delete NP entry that does not exist.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_OPER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, operational error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TPA_KEYS-3-TPAKEY_LTRACE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Unable to start third party gpg key ltrace.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_SYSDB_LIST
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The sysdb operation failed. Error text is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-SEND_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: A failure has repeatedly occurred when attempting to send PVST+ or PVRST BPDUs. This could result in incorrect protocol behaviour, or in the worst case, forwarding loops. The failure is most likely caused by a lack of available memory or packet buffers on the affected line card.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL-3-ERROR_RC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An function has failed in the OBFL process. The details are supplied in the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPCP_SRVR-6-IPCP_SERVER_RESTARTED_NODE_REBOOTING
### Response:
(Severity: 6), (Category: PLATFORM), (Description: IPCP server has been restarted. The node will be reloaded. This is not an error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_BIND_NOTFOUND
### Response:
(Severity: 4), (Category: SYSDB), (Description: The user bound to a node which does not exist. This is a warning only - this action is perfectly legal.), (Recommended Action: Check that this is the directory you intended to bind to.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-FALLBACK_CHOICE
### Response:
(Severity: 6), (Category: OS), (Description: It is an informational message.), (Recommended Action: It is an informational message. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-7-DEBUG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB VPLS component.), (Recommended Action: *NONE* Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-6-SEND_PULSE_FAIL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failure to send pulse to shelfmgr to notify the particular alarm condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_BAG_REG
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered an error to register the bag to bag infrastructure that is useful for packaging up complex data into single SysDB items. This software error will cause process termination for recovery The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-PCI_ATTACH_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The PCI attach has failed due to the above mentioned reason.), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. 'show process fia_drvr location <loc>' 2. 'show controllers fia trace all location <loc>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_INV_FGID
### Response:
(Severity: 3), (Category: FABRIC), (Description: Trying to add an out of range FGID to an array.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-DATA_CORRUPTION
### Response:
(Severity: 7), (Category: HA), (Description: Data corruption is detected in CDM data structures. This will generally result in a single process failure.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-THREAD_CREATE_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server was unable to create the specified thread.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath med missing-as-worst' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath med missing-as-worst' command is used to treat routes without a MED attribute as having the highest possible MED value for best path selection. By default, if a route is missing the MED attribute, it is treated as having a MED of 0, making it the most preferred route. This command changes the behavior to make routes without a MED the least preferred.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-PEX_VS1_FATAL_ERR_BIT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a pex switch error), (Recommended Action: Please try to correct problem by reloading board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: SPA OC192 driver error messages), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-2-NODE_RELOADING
### Response:
(Severity: 2), (Category: MEDIA), (Description: The media storage device specified is the boot device and is unavailable. The software will not be able to continue functioning without the boot device so the node is reset to failover or recover the failed device.), (Recommended Action: Media storage data should be recovered from either active node or current primary mirroring device. If media device still fails, replace media device. If not redundant node or no mirroring then reinstall software and configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-2-DOCKER_DAEMON_UNREACHABLE
### Response:
(Severity: 2), (Category: INFRA), (Description: The IOS-XR appmgr has failed to connect to the docker daemon. Docker related functionality will be unavailable. It may be possible to recover by taking the following steps: - Restart the docker daemon, and then restart the process appmgr on the impacted node. - Reload the impacted node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_QAD_NOTIF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get the qad notification of queue depth above or below watermark. This normally indicates there is some issues with the qad queue %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-6-SETTING_PXE_BOOT_MODE_FAIL
### Response:
(Severity: 6), (Category: LIB), (Description: 'At reload, setting boot mode to PXE failed'), (Recommended Action: 'Try another reload of the card')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_CORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE correctable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_LASER_CASE_TEMP
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-PLL_T0_STATE_HOLDOVER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the T0 PLL output is in holdover, maintaining the most-recent frequency to which it was locked.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-5-IFH_MISMATCHED
### Response:
(Severity: 5), (Category: IP), (Description: A mismatch in interface handles has been been detected. This is an indication that IM is potentially out-of-synched with MA. This problem occurs when interfaces are deleted while Interface Manager (IM) is not available.), (Recommended Action: The problem is normally recovered by the IPV4-MA component. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-4-SATELLITE_UPGRADE_ON_CONNECT_SET
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The user has configured the satellite to auto-upgrade on connection if the satellite is not at a current version, and the specified satellite is currently not at a current version. Therefore, if the connection to the satellite is dropped and re-established, then the satellite will start to perform an auto-upgrade which may temporarily take it out of service.), (Recommended Action: It is recommended to either: - remove the upgrade on connect configuration, until the user has manually upgraded the satellite to the current version. - trigger an upgrade to the current version (or reset the connection) as soon as possible to ensure that the auto-upgrade occurs at a known time)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_DELETE
### Response:
(Severity: 7), (Category: INSTALL), (Description: This may not affect the current request or operation, but subsequent operations may be affected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_FWD-3-SYSDB_BIND_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some error occured in sysdb bind operation bind. The text of the message displays the failed operation for the bindpoint with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-DEVICE_ISSU_NOTIFICATION
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This notification indicates when npu driver has encountered a specific notification.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-SPAN_INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error was encountered while the SPAN module was initializing. The error message contains details about the source of the error.), (Recommended Action: This problem may indicate there was an issue during SPAN init. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How are DRs and BDRs elected in OSPF?
### Response:
DR/BDR election is done on broadcast and NBMA networks. Routers send hellos containing their router priority. The highest priority becomes the DR and the second highest the BDR. If priority is equal, highest router ID wins. Priority of 0 makes a router ineligible to become DR/BDR.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-ENCAP_REMOVED_PW_CLEAR
### Response:
(Severity: 6), (Category: L2), (Description: Encapsulation in the pw-class is set, all pseudowires attached to this pw-class should be out of the unresolved state.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-INSUFFICIENT_BUFFER_SIZE
### Response:
(Severity: 3), (Category: SECURITY), (Description: A buffer is required in order to fill a certain data but the buffer size was too small.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-2-HBLOSS_COLLECT_LOGS
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The indicated process detected partial heartbeat loss for active RP/SC node's sc_reddrv. Debug logs are collected on the bootflash locally to help identify the the root cause of the heartbeat loss.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_EVENT_MGR_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize event manager. This would prevent process from receiving events.), (Recommended Action: A process will be initiated by the software. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-GET_TRAFFIC
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS show command failed to get the required information.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-NODE_LOOKUP_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: An attempt to use a QSM link was made -- but the remote node that exported the link to the local node was not in the local nodes database. This could be a harmless timing condition.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-7-ERR_SYSDB_BAG_ENCODE
### Response:
(Severity: 7), (Category: L2), (Description: ASIC error library encountered a SYSDB encode error while performing the indicated operation.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_HEARTBEAT_FAILURE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected interruption in the periodic 'Hello' messages.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-STALE_DEVICE_ENTRY_DISCARDED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: platform umass device number is called by PI code to return a unique device number for the device just discovered. This device number is used to construct the raw device name which in turn is also passed to mediasvr by PI. The mediasvr will use the raw name to look up partition and filesystem information in the node's platform_fsdata file so it can correctly mount the partitions and reformat them as needed. This message gets printed when the PI caller of get device number has allocated a fresh cdevice entry and removed any stale entry.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-DUPLICATE_TICKET_NOTIF
### Response:
(Severity: 7), (Category: OS), (Description: When the single writer mode is set, RDS library allowes to create a ticket. Got a ticket notification, for an already active ticket.), (Recommended Action: This is a Debug message.No action required. If the problem persists,Contact Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-3-ERR_QAD_GET_DEPTH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get the qad queue depth(number of packets in queue). This should be because of some issues with the indicated qad queue %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-1-DISK_ALERT
### Response:
(Severity: 1), (Category: INFRA), (Description: When some monitored disk's usage is above CRITICAL Threshold Percentage), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_ROUTE
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-PRE_PROVISIONING_ACTIONS_INITIATED
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP will trigger the pre-provision actions detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR ensure software package integrity during installation?
### Response:
Cisco IOS XR ensures software package integrity during installation through the use of digital signatures and checksum verification, preventing the installation of tampered or corrupted packages.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2TP-3-L2TP_CC_ACCT_NO_ACK
### Response:
(Severity: 3), (Category: L2), (Description: L2TP has not received acknowledgements, either positive or negative, for tunnel accounting records it sends to Radius in an extended period of time.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-ERR_EVM_CRE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to create an Event Manager to receive events in the specified thread. This is most likely to be caused by a resource starvation problem, but may also be due to an internal programming error.), (Recommended Action: Restart of EIGRP might solve the problem. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSDB_ITEM_BAD
### Response:
(Severity: 7), (Category: OS), (Description: Dumper keeps various config related data in sysdb. Unexpected or bad item under config for dumper. This might impact the funcitoning of the dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-MOBILE_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The Sync-E is configured without the necessary mobile license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-CFG_CHG_RESET
### Response:
(Severity: 5), (Category: ROUTING), (Description: Automatic soft reset on policy change is not possible as the neighbor does not support ROUTE_REFRESH and 'soft-reconfiguration inbound' is not configured.), (Recommended Action: Manually clear affected peer at earliest convenience, in order for configuration change to take effect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_BIND
### Response:
(Severity: 5), (Category: SYSDB), (Description: Sysdbcon was unable to bind to the root of SysDB. It is possible that there is a problem with SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the fast-flood command in IS-IS?
### Response:
The fast-flood command is used to enable IS-IS fast flooding. When fast flooding is enabled, IS-IS floods new LSPs before the SPF calculation is complete. This can improve convergence time in some scenarios, particularly in large networks. However, it can also lead to temporary routing inconsistencies and should be used with caution.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-TIMER_EXPIRED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that a timer shelfmgr was using to monitor a nodes boot progress has expired.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you discard unsaved configuration changes in IOS XR?
### Response:
To discard unsaved configuration changes in IOS XR, you can use one of the following methods: (1) exit configuration mode using 'end' or 'exit' commands, (2) use the 'abort' command to discard changes and release the configuration lock, or (3) use the 'clear' command to reset the configuration session.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Cisco IOS XR System Manager (sysmgr)?
### Response:
The System Manager (sysmgr) is responsible for overall system initialization, monitoring, and restart functions. It is the first process started on each node. It spawns, monitors, and can restart other processes based on their criticality and restart policies. It also coordinates role transitions between active and standby RPs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-MASTERSHIP_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Chassis Control driver process exited as it was not able to grab mastership or unable to release it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-4-CHKPT_REGISTER_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Encountered a checkpoint register failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BLWM-4-SHMEM_FAILURE
### Response:
(Severity: 4), (Category: OS), (Description: A failure occurred while initializing or accessing the shared memory buffer used to assemble the responses. This is most likely an internal error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-OS_BOOT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OS running on the indicated card is reporting an error condition during bootup.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_BUNDLE_ALL_MEMBER_ON
### Response:
(Severity: 6), (Category: L2), (Description: The specified BFD session is now running in all member mode.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of using the 'install add' command in Cisco IOS XR?
### Response:
The 'install add' command in Cisco IOS XR is used to add new software packages to the router without disrupting the current operation, allowing for seamless updates and upgrades.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-3-CFG_NOTIF_SETUP
### Response:
(Severity: 3), (Category: ROUTING), (Description: MFWD-HFR library encountered error during config notification registration.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_UCORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory uncorrectable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-5-DUMP_FAIL
### Response:
(Severity: 5), (Category: MGBL), (Description: An error has occurred while dumping of the collected data from the pm collector process. This error could error due to various reasons below : a) Local disk is full or something wrong. b) TFTP server is not reachable. c) TFTP directory configured does not have write permissions.), (Recommended Action: Try eliminating the reasons mentioned in explanation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-3-THREADING_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The presented threading operation failed. It is likely that policy multi-version calls will stop working and thus policy may not be operational.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-DDR_LOSS_OF_SYNC_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on DDR interface on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-FAM_CONNECT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Connection to FAM process failed during AFMon EA process init. This would lead to an inablility of AFMon EA to receive flow updates from the hardware), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE* Else try restarting manually. Get the job id 'show processes afmon_ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-5-SOME_SATELLITES_NOT_RESYNCED
### Response:
(Severity: 5), (Category: L2), (Description: CFM was unable to ascertain the status of one or more Satellites within 5 seconds of starting up. This means some CFM functionality will not be available on these Satellites, even though they may be up.), (Recommended Action: The problem may resolve itself given sufficient time, otherwise reduce other system activity to ease memory and CPU demands. Check that the EtherSla channel shows as 'open' in the output of 'show nv satellite protocol control'. If CFM still doesn't come up on configured Satellite links to these Satellites, collect the required information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-3-UNKNOWN_IDB
### Response:
(Severity: 3), (Category: L2), (Description: A set of IDBs are kept with information on each interface. Somehow this information has become inconsistent with the system.), (Recommended Action: Restart the main process (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-ENQUEUE_MAC_COUNT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: While enqueueing MAC record in MAC list, index is out of bound in the array.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TW_CREATE_TIMESLICE_TOO_SMALL
### Response:
(Severity: 3), (Category: OS), (Description: The kernel will override a request to create a repetitive timer of less than 100ms on a priority 10 thread and internally use 100ms. This could cause software using this timer wheel to behave extremely badly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is just an info message in DPA), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-TAM_SYNC
### Response:
(Severity: 3), (Category: SECURITY), (Description: tam_sync process has encountered an internal error.), (Recommended Action: Please restart tam_sync process on affected node, for an attempt to recover from error. Note that not all error conditions can be recoveded by process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CRITICAL_ALARM_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node will be brought down because a critical environmental alarm occured.), (Recommended Action: Check air-flow, fan trays, and make sure that chassis is well-cooled. Manually boot up the node once the chassis has been checked.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-RULES_PARSE_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The rules file cold not be parsed. Please check the rules file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_DELETE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as attach point data was being deleted. This could cause problems with future configuration attempts, and it does indicate an internal inconsistency so it might be best to restart the policy_repository to try to clear this inconsistency.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-4-EA_INIT
### Response:
(Severity: 4), (Category: FORWARDING), (Description: The Tunnel-IP EA process failed to initialize a critical component. The process cannot proceed and will restart to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-3-ALARM_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Autogenerated alarm), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-TIMESTAMP
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software operation failed during timestamp processing.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-EA_DROP
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that PBR failed to process an invalid packet. The expected forwarding action will not be taken.), (Recommended Action: An error may have occurred in the hardware or lower layer processes. Invalid packets are delivered to pbr_ea. Please collect the information specified in required_info section and contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-MIB_LWM_CONN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: 'Could not connect to pki mib channel. Snmp traps will not be sent'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_8_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IFMGR_IF
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified interface manager request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-BAG_REG_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some error occured while trying to register edm bags. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that process invmgr failed to initialize and exited. Inventory information would not be available. This would affect CLI 'show inventory', inventory schema, and the entity related MIBs. Some reasons are: 1) System manager process ready notification failed 2) Error waiting for secondary RP to go active 3) Internal API error %s - indicates the internal message. %s - indicates the internal error reason.), (Recommended Action: System manager will automatically respawn this process, up to a fixed number of times, when this error is encountered to recover. Execute 'show process invmgr location 0/x/cpu0' to verify that the process is up and running. If it is non-operational, do 'process restart invmgr location 0/x/cpu0' to manually restart it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET1_INTR_MISSING_EOP_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET1_INTR_MISSING_EOP interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_MQ_SEQ_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 0 MQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-RED_STATE_UNK
### Response:
(Severity: 4), (Category: SERVICES), (Description: A notification has been received from Sysmgr indicating that the redundancy state (e.g. active, standby, etc) of the card has changed to a state unknown to RSPP MA. RSPP MA will continue to use the old state.), (Recommended Action: A restart of RSPP MA may solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR1_INTR_DC3_MIN_DROP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR1_INTR_DC3_MIN_DROP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-CHECKPOINT_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: When an interface is error-disabled, the state is checkpointed. An error occurred during this process, which means the error-disable state for this interface will not be preserved during an ISSU operation.), (Recommended Action: Do not perform an ISSU if it is essential that the interface is error-disabled after the ISSU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-SEND_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An attempt to transmit a valid packet to the identified adjacency failed due to an internal software error.), (Recommended Action: Check to see if the tcp process had restarted. If it has, no further action is needed. The remote ANCP clients should restart the connection. The rates for any configured ports previously in UP state will go to DOWN state but their published rates will remain the same. If the tcp process hadn't restarted, then from the CLI, try to clear the ancp neighbor. The adjacency would be re-established and packet send should be successful henceforth. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_2_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-CORE_INFO
### Response:
(Severity: 4), (Category: OS), (Description: Debug core info), (Recommended Action: Information of the crashed process. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'next-hop-self' command in IOS XR BGP configuration?
### Response:
The 'next-hop-self' command causes the BGP speaker to set itself as the next hop for routes advertised to a neighbor. This is commonly used when the BGP speaker is aggregating routes from multiple neighbors and advertising them to another neighbor. Setting next-hop-self ensures that the receiving neighbor has a route to reach the advertised prefixes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_MCAST-3-ERR_STR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM MCAST, error information), (Recommended Action: Please collect the console log, multicast traces (show mfib trace loc <>, show mfib hardware ltrace location <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-ID_CERT_RENEW_NOT_STARTED
### Response:
(Severity: 3), (Category: LICENSE), (Description: The device registration failed. The ID-Cert start date is later than the device current time.), (Recommended Action: Please adjust your device clock to be up-to-date, and retry the registration again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_FATAL
### Response:
(Severity: 3), (Category: IP), (Description: Fatal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPISSE-7-DEBUG_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-NOT_IMPLEMENTED
### Response:
(Severity: 7), (Category: HA), (Description: Unimplemented functionality.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the mesh-group command in IS-IS?
### Response:
The mesh-group command is used to optimize IS-IS flooding on highly meshed point-to-point networks. Routers in the same mesh group do not flood LSPs received from one member to other members of the same mesh group. This reduces unnecessary flooding and saves link bandwidth.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_0_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install prepare command in IOS XR?
### Response:
The 'install prepare' command is used to prepare the system for an installation operation. It checks for available disk space, performs configuration checks, and determines which processes will be affected by the installation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_AHS_LOS_LANE1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-2-ENFORCE_OOC
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is enabled without appropriate licenses.), (Recommended Action: The customer should either purchase more licenses or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-RCC_HW_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot initialize with the RCC HW init library. Possible fabric multicast feature may not function correctly.), (Recommended Action: Collect all the event and console logs. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-NEXTHOP_RESOLUTION_DEPTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: Recursive route lookup for resolving the prefix has exceeded the maximum recursion depth allowed(possibly because of a routing loop).), (Recommended Action: The current state of nexthop resolution can be seen by using the command 'show rib firsthop'. To further troubleshoot this state use commands like 'show route', 'show route backup', and 'show route resolving-next-hop' recursively to resolve the prefix manually. The output of these CLI commands will help to identify the reason for hitting recursion depth limit. 'show rib recursion-depth-max' can be used to check the value of maximum recursion depth allowed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-SECURE_BOOT_NOT_ENABLED
### Response:
(Severity: 4), (Category: DRIVER), (Description: The Secure Boot feature for IOFPGA bootflash images are not present in the card. This message is a reminder to the user that a FPD upgrade operation is required to enable this feature.), (Recommended Action: Use 'hw-module location all fpd all' command to initiate upgrade of IOFPGA bootflash with Secure Boot enabled images.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_SHM_OPEN_FAILED_DEVICE_TEMP
### Response:
(Severity: 3), (Category: FABRIC), (Description: 'Might be memory problem, setting size limits could be issue or memory mapping could have failed. Or initializing or setting shared attributes for the lock could have failed.'), (Recommended Action: Reboot the card)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Rx power less than or equal to the low Rx power alarm threshold. The SFP is the pluggable optics on the line cards. The Rx power threshold values are read from the SFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-FILE_BAD_MAGIC
### Response:
(Severity: 7), (Category: OS), (Description: The file has wrong magic number.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_SYSDBBIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_CREATE_SERVER_ENTRY
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error occured while creating TACACS+ server entry.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_VLAN_EA-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX VLAN-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-SLICE_MOD_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. 'process restart i2c_server location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-DEVICE_CREATED_AND_DISABLED
### Response:
(Severity: 4), (Category: OS), (Description: A device is disabled for logging onboard by user configuration.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-2-NOMEM
### Response:
(Severity: 2), (Category: L2), (Description: The requested operation couldn't be completed due to a low memory condition.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - If this message is persistent, check memory usage - Try to have sufficent memory conditions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-GEN_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An IPV6-specific software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_HDR_FIFO_OFLOW_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg hdr fifo overflow on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-4-SET_THREAD_PRIORITY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unable to set the heartbeat pulse of this node to high priority. Proceeding with default priority, however in a high CPU consumption, this node's heartbeat pulse may get lost, causing this node to get reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGEDM-3-FAILEDGET
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Config library failed to get item with the reason mentioned in the message. This may lead to wrong 'show commit changes diff'.'), (Recommended Action: Please collect the logs mentioned in required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-NULL_ARG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to inavlid_arguments. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_PARM_REPORT_ERROR
### Response:
(Severity: 4), (Category: MEDIA), (Description: Application reported storage device problem but with invalid parameter shown), (Recommended Action: Capture console log, 'show media' and 'show media trace' output. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option dynamic attributes feature?
### Response:
The MPLS TE path-option dynamic attributes feature allows certain LSP attributes to be specified for a path-option without configuring an explicit path. LSP attributes that can be specified include bandwidth, priority, affinity, and setup and hold priorities. This provides a way to influence the dynamic path calculation with additional
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SRVR_ENGINE-3-ERR_3_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: SKS server exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-2-ERR_MEM_ALLOC
### Response:
(Severity: 2), (Category: ROUTING), (Description: There is not enough memory available to RIP process.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-CERR_REG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cerrno Registration failed. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-ERR_INFO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails due to failure during forwarding feature programming. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-VALIDATE_FILE_FAIL_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to sanitize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-GEN_ERR_3
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered an Error in operation. The error string updates the reason for this error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_MRT-7-DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when cleaning up debug.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CHKPT_NOT_INITIALIZED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Sync-controller is the software component which controls the synchronization devices in the system. Checkpointing is a mechanism to update the redundant RSP with the current configuration and status of the system to help takeover in case of a failover. The checkpoint mechanism needs to be initialized for Sync-controller to update the standby RSP with current frequency syncronization status. This failure could be because of memory allocation failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-4-INTF_RETRY
### Response:
(Severity: 4), (Category: L2), (Description: The UDLD protocol encountered an error while syncing interface configuration, and has scheduled a retry of the failed interfaces. This message is seen on the first retry, and every 5 retries.), (Recommended Action: If this is the first time the message is seen, it is likely that the retry will succeed, and no action is needed. If the retry count is greater than one, this indicates an ongoing problem, and the failure should be investigated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_2_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CPT4_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PHY controller driver version is not compatible with PHY controller hardware version.), (Recommended Action: Upgrade the PHY controller CPLD image using the FPD procedure, followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-UNSUPPORTED_VENDOR
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-INTERNAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LS_LFI_CRC_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a lfi crc error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-UNKNOWN_VENDOR_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to get vendor type, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_linux-7-MALLOC_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Low in memory), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_ASIC_HARD_RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: Identified Fabric ASIC experienced a severe error and is halted. Hard reset & re-initialize the ASIC to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_V6FIB_RP-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform IPv6 FIB, Error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TTY_MGMT_REG_SUBSET
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to tty_mgmt_register_tty_subset() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_PRE_FEC_BER_HIGH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-LWM_API_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Failure in LWM client API.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-6-STATS_COUNTER_INCONSISTENCY
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-ENS_PUBLISH
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens API , it returned failure. ens_publish failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV6_EA-3-ERROR3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP_POLICY-3-ORA_INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-MAIN_INIT_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: One of the functions called during initialization of the process failed.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_REG_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel load-share feature?
### Response:
The MPLS TE tunnel load-share feature allows the control of how traffic is load-balanced between two or more parallel TE tunnels to the same destination. By default, load-balancing is based on a hash of the packet header fields. Optionally, the load-share value can be specified manually to control the proportion of traffic to each tunnel.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPG-6-INCOMPLETE_DATA_RETRIEVED
### Response:
(Severity: 6), (Category: MGBL), (Description: An error occurred on a specific area of the namespace while requesting information for a higher level path. The specific area of the namespace with the error has been returned with empty data. Data in the rest of the namespace is returned as normal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Pass the syslog and configuration information to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-PARTNER_NODE
### Response:
(Severity: 3), (Category: OS), (Description: Unable to query partner node from platform.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_SPECIAL_HANDLE_THRESH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: ASIC errors have occured and been handled. Such error have crossed threshold.), (Recommended Action: ASIC errors that need special handling have occured and exceed the threshold. The error condition has been handled.Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
12IN1-4-UPDOWN
### Response:
(Severity: 4), (Category: L2), (Description: The specified Serial 12in1 interface is operationally down due to an alarm. Check alarm status using show controller 12in1-T command on the cli.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-0-CARD_RESET_ABORTED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The card reset was aborted because the user has disabled card reset to allow troubleshooting to be performed.), (Recommended Action: Manually reset the card to bring the card back to a known steady state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-CONNECT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error indicates failure in connecting the channel.), (Recommended Action: Please collect the console log and the CLI output. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show cef show cef location <> show cef trace location <> show cef platform trace common all location <> show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> show cef platform services trace common all reverse loc <ISM> Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show cef show version show install summary Also notice if the error message is transient or persistent. Report to your technical support representative. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-UNRESOLVED_LINKPOINT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unresolved linkpoint'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_AIS_DEME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-EVENT_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemaon was unable to create an event manager for receiving messages, and therefore failed to initialize. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TARGET_CFG_DESTROY
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen client failed to destroy target config buffer.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-LBUS_WRITE_TIMEOUT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Local Bus write operation timeout error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP graceful restart feature?
### Response:
The MPLS LDP graceful restart feature helps to minimize the impact of LDP session resets, allowing MPLS forwarding to continue uninterrupted while the control plane restarts. It preserves the MPLS forwarding state across the restart. It is enabled with the mpls ldp graceful-restart command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-FAILED_FILESYSTEM_ACCESS
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: When periodic check on the filesystems detects that a file-system is inaccessible, this error message is logged. *SUPPORT*), (Recommended Action: Contact TAC for further support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_DRIVER-3-SW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Driver software error), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_NETIO-3-INIT_TRACE
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of tracing for the NetIO caps. This will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-SEM_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver was unable to perform semaphore operation for interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD_LIB_XFORM-3-VERSION_MISMATCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: A version mismatch detected by RCMD, the message was discarded.), (Recommended Action: Report to Technical Support. Can happen during ISSU/upgrade operation but is not service affecting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX8749_CDMA-6-NOT_SUPPORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that pak type is not supported), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_OVR_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA10 burst FIFO overflow error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_LIB-3-BATCH_BUFFER_SEND_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error in batch buffer sent for redist register.), (Recommended Action: Restarting the client process from which the errow was emitted may fix the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_DRV-3-ERR__SHMEM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in platform component,during shared memory creation), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-PWR_BUDGET_ENFORCEMENT_DISABLED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The power budgent will not be enforced by the software. All modules will be allowed to boot up. This may cause chassis reload or hardware damage if the system is overloaded with modules that take up higher power than what is available.), (Recommended Action: Ensure that the system has enough power. Use the Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show environment power-supply<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show environment power-supply<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. command to do the same. Remove *power budget enforcement disable* from the admin config unless otherwise needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_EVENT_CREATE
### Response:
(Severity: 7), (Category: OS), (Description: Event conn create failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-ETHER_XCVR_CODE
### Response:
(Severity: 2), (Category: L2), (Description: The xcvr code is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA - Enabling power for LC), (Recommended Action: No actions are required as this is just an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_CLEAR_UNKNOWN_TABLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process received a clear event from RIB for a table which it was not tracking.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-2-RESET_RECOVERY_FAILED
### Response:
(Severity: 2), (Category: INFRA), (Description: When the Ethernet Switch Driver (ESD) process encounters certain switch errors, it initiates a switch reset recovery operation. This involves resetting the switch and then exiting the ESD process so that it is restarted by the process manager. If this reset recovery operation fails, ESD will escalate a fault to the shelf manager in order to reload the card to recover from the originally reported switch error.), (Recommended Action: To determine why the switch reset recovery operation failed, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. In addition, the recommended action for the originally reported switch error should be followed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_EVENT
### Response:
(Severity: 3), (Category: OS), (Description: A call to a event manager interface failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSM-3-ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failure in Multishelf Manager.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECY_DRIVER-0-KAT_FAIL_DETECTED
### Response:
(Severity: 0), (Category: L2), (Description: Secy Driver has detected POST(Power On Self Test) KAT(Known Answer Test) failure, for the specified Port No. The Encryption and Decryption capabilities of MACSEC capable PIDs are tested against Known CT/PT values. If any port fails KAT test then all the ports on the card are brought down and put in error state. No traffic shall pass through on the MACSEC capable PID which failed KAT.), (Recommended Action: Collect showtech support optics and showtech support ofa. Deactivate the faulty card and contact TAC to examine this card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-7-LICENSE_RECLAIMED
### Response:
(Severity: 7), (Category: LICENSE), (Description: Due to a loss of inter-process communications the license manager had to reclaim a license that was not properly released.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-CHASSIS_OVERTEMP_CLEAR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Chassis ambient temperature has returned to operating range. Ambient temperature is the average of the temperature inlet sensor for all RSP plugged in the chassis.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_OPTICS_TEMP_OUT_OF_RANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_EVENT_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-EVM_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal error was encountered while initializing event manager for default configuration verification thread. This condition might have been caused by the failure of the event_block() API.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please collect 'show tech-support cfgmgr', 'show tech-support sysdb', 'show tech-support rdsfs' and 'show process blocked'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-TM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The asic traffic manager initialization failed due to the above mentioned error.), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. 'show process fia_drvr location <loc>' 2. Collect the Broadcom ltraces: pkg/bin/fia_show_ltrace -S If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_STORM-3-SC_MODIFY_ERR_INTF_NAME
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to program storm control as it is conflicting with an existing AC), (Recommended Action: Remove storm control config on this sub-interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA-3-RADIX_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An internal error occured while updating an internal node database.), (Recommended Action: Do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-DB_INT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager NFM encountered an error due to internal software issue and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-INVALID_PATH
### Response:
(Severity: 7), (Category: OS), (Description: Most probably tried to configure an unsupported path e.g. rcp. Configure a valid path.), (Recommended Action: 'Configure a valid path')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-7-ERR_INIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: MPLS LSD failed to initialize for the reason displayed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-4-AVL_TREE_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MRIB encountered error while initializing AVL Tree structure for FGID), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-MPLS_STATS_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current stats profile and the newly configured stats profile. Needs attention with LC reload.), (Recommended Action: System LC is inconsistent. Need to reload the LC in order to activate the new stats profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-WARNING2
### Response:
(Severity: 4), (Category: SECURITY), (Description: Internal Warning.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-3-UNRECOVERED_PIO_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A PIO error was detected and the responsible client was notified but did not mark the error as recovered. Restarting the client.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_MPLS_EA-3-ERR_INIT_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-MISSING_SUBGRP
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected that a Neighbor AF did not correctly belong to an update sub-group. BGP attempted to correct this error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-3-CFGMGR_ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: The pse_pol_cfg was unable to connect or send admin proc ready to cfgmgr.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-ADJ_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when FIB tried to communicate with AIB. The process will attempt to recovery by restarting. If the restart count is excessive then the node may reload. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_INTERNAL_CHECK
### Response:
(Severity: 3), (Category: ROUTING), (Description: An inconsistency in internal state was detected.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-7-ERR_BP_CFG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver encountered an error in back pressure configuration. This indicates BP configuration received from the fabric control software is incorrect. If this condition prevails, it could impact data traffic when fabric gets congested.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_HWOFFLOAD-4-NP_SCALE_LIMIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: NP level scale limit has been reached.), (Recommended Action: All new sessions on this NP will be kept in ADMIN-DOWN state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMP-6-PROC_READY
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WATCHDOG-3-MSG_REPLY_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: This message indicates that a failure has occured in Watchdog), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_LIB-3-SERVER_CONNECT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and server, perhaps because the communications infrastructure is not yet up. The MBI operation in progress will not be carried out. %s - indicates the error message.), (Recommended Action: Unless the connection was retried and eventually successful, further information will need to be collected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CLIENT-3-GEN_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered an Error in operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-6-SELFMANAGE_INFO
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Netio is upgrading this dll. This is here only for informational purpose only. No further action is recommended/needed.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDO-5-L2PORT_FAULT_NOTIFY
### Response:
(Severity: 5), (Category: L2), (Description: ATM SPA GDO L-AIS insertion/removal notification messages), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key characteristics of the QNX Neutrino RTOS used in IOS XR?
### Response:
QNX Neutrino is the third-party real-time OS used as the foundation for IOS XR. Its key characteristics are\n- Microkernel architecture\n- Preemptive multitasking and multithreading\n- Memory protection and fast context switching\n- Message passing based IPC\n- POSIX compliance\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-CLIENT_ID_OVERWRITE
### Response:
(Severity: 4), (Category: ROUTING), (Description: This message indicates that more than one instances of IGP protocols are using the same BGP-LS identifier. This may result in incorrect behavior.), (Recommended Action: Configure the IGP instances so that each has unique BGP-LS identifier.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP session groups in IOS XR?
### Response:
BGP session groups in IOS XR are configured to group common session parameters for multiple neighbors, simplifying configuration. router bgp 65000
session-group CORE-SESSIONS
remote-as 65002
update-source Loopback0
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_8_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESSION-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize or shutdown the debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE_UDI-3-RETRIEVE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Can not retrieve licensing UDI data from backplane or the UDI string retrieved is invalid or mismatch.), (Recommended Action: Ensure backplane chassis serial number is correctly programmed. Issue 'show inventory chassis' in admin mode to verify backplane serial numbers, the valid Cisco serial numbers are made up of decimal digits and upper case letters following Base 36 numeral system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A function has failed in Shelf Manager. The details are supplied in the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_NB_SERDES_2_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data north bound serdes link 2 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are user-defined EEM policies in Cisco IOS XR?
### Response:
User-defined EEM policies in Cisco IOS XR allow network administrators to create custom policies using the Cisco IOS XR command-line interface (CLI) or a script. These policies can be tailored to specific requirements and can perform various actions based on triggered events.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-MISSNUMBER
### Response:
(Severity: 4), (Category: MGBL), (Description: The command entered requires a number and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-RECV_LACP_MCAST_MAC
### Response:
(Severity: 5), (Category: L2), (Description: EVPN receives the CE's System ID from LACP for use in EVPN as the PBB-BSA. It cannot be used if the Multicast bit is set.), (Recommended Action: Reconfigure the CE's System ID within LACP without the Multicast Bit set.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install commit command in IOS XR?
### Response:
The 'install commit' command makes the current active software packages persistent across reloads. Without this command, the router would revert to the previously committed software set after a reload.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MBR_BFD_SESSION_UP
### Response:
(Severity: 6), (Category: L2), (Description: The BFD session on the link has indicated that it is UP state. The link has fast-protect BFD protection on it until further notice.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOPMGR-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This syslog is printed when Topology Manager or its clients fail to initialize necessary data structures and memories. If the error originates from the system call the error message is also printed.), (Recommended Action: Based on the system error message the user can tell what went wrong. More likely than not, the user has to restart the system. If the problem persists he or she has to contact Cisco customer support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-LIST_UNDEFINED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Trying to configure a method list in the line configuration that is not defined in AAA), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-INVALID_PLATFORM_EVENT_TYPE
### Response:
(Severity: 4), (Category: L2), (Description: The platform has triggered an event that is not recognized. This is most likely due to a bug in the platform layers.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_DAPS_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the DAPS address pool service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the DAPS service, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-INVALID_BPDU
### Response:
(Severity: 3), (Category: L2), (Description: STP received a BPDU which would not be decoded in accordance with section 14.4 of the IEEE 802.1Q specfication.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-6-IQ_CFG
### Response:
(Severity: 6), (Category: IP), (Description: There are restrictions to use default or 16 tcp internal queues. The text of the message displays more information.), (Recommended Action: For configure to take effect, please restart tcp on each nodes. Else it will taking effect post Router reload. On Router reload, TCP is silently restarted if tcp num-thread configuration is present.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_IMDR_V1_PREP_CALL_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was encountered while calling the CCI cleanup function prior to restarting the process as part of an IMDR operation. The parenthesis contain the error code and the corresponding string description for it.), (Recommended Action: Linecard reload. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-5-ERR_RES_PROG
### Response:
(Severity: 5), (Category: FABRIC), (Description: An error occured while the Fabricq driver was trying to create queues for an interface. This may leave one or more interfaces out of operation.), (Recommended Action: If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-4-BADFILES
### Response:
(Severity: 4), (Category: MEDIA), (Description: Files Overwritten by Another Image, or Router Crashed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel backup feature?
### Response:
The MPLS TE auto-tunnel backup feature enables the automatic creation of backup tunnels to provide fast reroute protection for MPLS TE tunnels and the IGP against link and node failures. Backup tunnels are created to next-hop routers and activated when the protected link or node fails.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-6-SHMWIN_RESET
### Response:
(Severity: 6), (Category: INFRA), (Description: SLA Client Library database module shared memory window has been reset. This may have been caused by the process restarting whilst the shared memory window was in an invalid state or a change to the database that is not safe over upgrade.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-6-DEPRECATED_CONFIG
### Response:
(Severity: 6), (Category: L2), (Description: The PTP clock-selection and clock-advertisement configuration items are deprecated and will be removed in a future release. These two configuration items have been replaced with a single configuration item to select G.8265.1 (telecom profile) behavior: \'ptp clock profile g.8265.1\'.), (Recommended Action: Use the ptp clock profile configuration item to select G.8265.1 (telecom profile) behavior.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIER-3-PCIE_LINK_DOWN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Detected PCIE link down on one of the PCIE root/bridge downstream port), (Recommended Action: Current action is to log a PFM message and try to continue as operational so that it wont effect on the ongoing activities. If it is a critical PCIE link down, it will be eventually identified by RSP as heartbeat loss and card will be reloaded by shelfmgr. Post reload, it is expected this fault will recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO-3-BUNDLE_OFFLOAD_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CFM is configured over bundle interfaces with bundle members configured on trident line cards. Bundle offload is globally configured. Bundle offload is only supported on typhoon line cards.), (Recommended Action: Either disable the bundle offload globally or remove the bundle members from trident line card(s).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_ECM_OPEN
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver failed to open the event connection manager during the driver initialization. The driver will be non-operational due to this error.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV6_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TSEC-2-DRIVER_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to the reason indicated by the error code. This is critical failure. Driver cannot operate.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD-4-ERROR_PROCESSING_LRD_EVENT
### Response:
(Severity: 4), (Category: SERVICES), (Description: The Service Role Daemon received an LRd event which it was unable to process. This could potentially mean that a card does not have it's specified role enacted, or removed if it was taken down.), (Recommended Action: Restart the service_role_daemon process to resync all roles and replay the lost notification. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-CONFIG_WAVELENGTH
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Software failed to calculate wavelength for this tunable optic. On failure, it reread complete EEPROM and recalculated wavelength from new data. But that retry also failed. Need to configure wavelength to bring this port up.), (Recommended Action: Try to bring up the port by - Configuring a valid wavelength If that does not work then by - Optic OIR Get following output for further analysis - show tech-support ethernet interface location <> - show controller <> all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-AUTOSAVE_INIT_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialization of config cli auto-save commit verifier failed.), (Recommended Action: Collect show logging output, show config failed before exiting from admin config mode, to see which config commit caused this error. Also any other suspicious error messages on console and inform technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between IOS XR bootable files and PIEs?
### Response:
IOS XR bootable files with the .vm extension are used to install software when the router is booted for the first time or during a last resort disaster recovery. PIEs are packages that can be added to a running IOS XR system to provide additional functionality.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_AGENT-3-CARD_AUTH_STATUS
### Response:
(Severity: 3), (Category: DRIVER), (Description: Authentication status of hardware in the specified location. If status is FAILED, the card could not be verified as a genuine Cisco product.), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather the output of CLIs 'show diag <location> eeprom-info', 'show tech-support ethernet interfaces'. Please ensure that the line card daughter board card type, board PID and serial number are not modified. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-THREAD_DETACH_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server was unable to detach from a new thread.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-3-PORT_STATE_ACK_TIMEOUT
### Response:
(Severity: 3), (Category: L2), (Description: Updates to the port states have errored for the indicated ring instance. Any further state updates on these ports cannot be sent until the error is cleared, potentially blocking important updates. It is also possible that the current state has not been correctly implemented.), (Recommended Action: Restarting the l2vpn_mgr and erp_ctrl process should resolve any network disruption due to the issue, but support should be contacted so the issue can be investigated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_EA_OOR-4-NP_FLOWS_OOR_GREEN
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_I2C_PHY_TM_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected I2C timeout error on PHY SFP port.), (Recommended Action: Ensure that the SFP plugged in is supported. If not, replace the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-TCAM_L2_THRESHOLD_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The TCAM utilization for the Logical Table (LT) L2 partition on a specific LC has exceeded the provisioned warning threshold (%)), (Recommended Action: Limit TCAM Logical Table (LT) L2 usage accordingly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-2-SHMWIN_CRITICAL_ERROR
### Response:
(Severity: 2), (Category: QOS), (Description: The DPA QoS EA module encountered a critical shared memory error. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CVAC-3-CONFIG_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Automatic configuration from the indicated file was not fully successful. At least one error of some sort was encountered.), (Recommended Action: Inspect the suggested file and/or 'show' commands to determine what configuration was rejected and why. Manually correct the configuration, or update the source configuration file and reload the router to prompt CVAC (Cisco Virtual Appliance Configuration) to run again on the updated file.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-7-ETMM_REG_FAILURE
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the IOS XR System Database (SysDB)?
### Response:
SysDB is a centralized in-memory database that provides a consistent view of system state and configuration. It is used by IOS XR processes to store and retrieve config and operational data. SysDB supports high availability by replicating data between nodes. It provides a schema-driven API for processes to access the data.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-7-ERR_REGISTER_GET
### Response:
(Severity: 7), (Category: FABRIC), (Description: An attempt to read a Hardware register failed. This could result in inconsistent behavior of the device.), (Recommended Action: Run diags on the board and contact TAC support. If it is possible to isolate the trigger point for the read failure, collect all the necessary condition that caused the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-SLICE_NOT_READY
### Response:
(Severity: 3), (Category: L2), (Description: Slice not powered up or initialized yet), (Recommended Action: Check if all the slices of the card are powered up and initialized)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-FRR
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified backup tunnel interface has changed it's FRR status.), (Recommended Action: None. This is a solicited message (by 'logging events frr-protection' \ interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC_CTRL-3-NO_PRIMARY_DSC_NODE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: After numerous retries, the system has been unable to elect an RSP node to act as the primary DSC node. Without this election complete, the system is inoperable.), (Recommended Action: This node will automatically reset in order to reattempt bootup and DSC arbitration. If this is a cluster configured system, check the physical connections for the inter-chassis control links. If the redundancy state displayed in the log indicates an unknown redundancy state, this may indicate a hardware issue with the RSP card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-3-ECC_ONE_BIT_XFP_DATA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Poller device driver Detected and corrected one bit error), (Recommended Action: Its a correctable error, no action needed. Verify no false DOM alarms for ports on corresponding poller device)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an IPv6 address on an interface in Cisco IOS XR?
### Response:
To configure an IPv6 address on an interface, enter interface configuration mode and use the 'ipv6 address' command. RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/1
RP/0/RSP0/CPU0:router(config-if)#ipv6 address 2001:db8::1/64
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_UCORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory uncorrectable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-PLL_PTP_STATE_HOLDOVER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the PTP PLL output is in holdover, maintaining the most-recent frequency to which it was locked.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-HOST_LINE_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No line lock between the NPU and DSP), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_3_FAIL_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 3 failure on FIA 1.), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-PAK_FROM_ISIS_NOT_FOUND
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS was not able to process a packet from ISIS successfully and hence dropped the packet.), (Recommended Action: This message is seen when clns was not able to process the packet as no Interface handle was found in the Database. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-TX_CH_LO_BIAS_CURRENT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects a low bias current on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption in the downstream.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-BOARD_LS_SILAB_CLK_FAIL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a clock failure on some bus/port), (Recommended Action: RMA the LC ,if you see this error on every reload. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install deactivate command in IOS XR?
### Response:
The 'install deactivate' command is used to deactivate a previously activated software package. The package remains on the router's storage but is no longer active.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-ERR_ASIC_PARITY
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq Asic encountered a parity error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-WRITE_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The SockIO SPP plug-in failed when attempting to communicate between threads.), (Recommended Action: If any problems are seen, they may be rectified by restarting the spp process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: CCSQ Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-3-CRDCNTRL_IDPROM_READ_FAILED
### Response:
(Severity: 3), (Category: LIB), (Description: 'At bootup, failed to read idprom, unknown card'), (Recommended Action: 'Try another reload of the card')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-INIT_POLICERS
### Response:
(Severity: 4), (Category: OS), (Description: It failed to program a flow policer during initialization.When this issue happens, it will trigger an automatic restart.), (Recommended Action: When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-HW_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Egress Queue Manager encountered a HW error. This is a severe error and ASIC will be reset by the driver.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install verify inventory command in IOS XR?
### Response:
The 'install verify inventory' command is used to verify the consistency of the software inventory on the router. It checks that the inventory database matches the actual packages installed on the router and reports any discrepancies found.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-REPL_RETRY
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message reporting that replication operation has failed and will be retried. This may be transient failure, replication may pass in next retry. It is possible that some configuration on the member is rejected by the management-agent. When retires exceed it will be indicated by another message (ERR_OP_RETRY_THRESHOLD)), (Recommended Action: Ensure no such configuration is present on bundle-member which can be rejected by the management-agent.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-IM_CAPS_RESYNC_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error during resync of QoS capsulations with IM.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then re-attach the policy to the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAPS-4-INIT_FAIL
### Response:
(Severity: 4), (Category: IP), (Description: A failure occurred during the initialization of DAPS process. The exact reason for the failure is mentioned in the message. This could happen because of the following reasons. 1) A problem in allocating local resource because of memory shortage or software error. 2) Problem in initiating connection to an external/dependent module either because the external module is not ready or a race condition has occurred. 3) Software error either in local or external module.), (Recommended Action: System will retry to start the process and no user intervention required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-RP_ISOLATION
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that target RP has transitioned into RP isolation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-ETH_SERVER_CONNECT_STATUS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that DRP-REDDRV's connection to the eth_server process status (trying to connect, connected or disconnected) and only when connected DRP-REDDRV is capable of sending & receiving heartbeats or arbitration messages), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_MPLS_EA-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An updation error has occured for MPLS Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-FIB_CONNECTION_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: SPAN EA has failed to reconnect with the Forwarding Information Base (FIB) after the connection went down. Traffic may not be mirrored to the correct destination. Use 'show monitor-session status' to determine which interfaces are affected.), (Recommended Action: This could be a timing issue and so issuing a 'process restart span_ea' and/or 'process restart fib_mgr' on the affected nodes will trigger a new connection attempt from the SPAN side. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-STATS_SHM
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: IP Netio library encountered failure while operating on the shm stats information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-RP_BIOS_BOOT_INFO_ERR
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver failed to access the CPU Complex FPGA registers to get the information about which BIOS SPI flash was used to boot the running BIOS. This information is used by the output of 'show hw-module fpd', due to this failure, the output of this command will not show current running FPD info for the Backup BIOS image if the Primary BIOS was corrupted.), (Recommended Action: Restart the ccc_driver process will allow ccc_driver to re-read this information from the CPU Complex FPGA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR backup tunnel timers feature?
### Response:
The MPLS TE FRR backup tunnel timers feature allows the configuration of hold
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-ERROR_HW_ACCESS
### Response:
(Severity: 1), (Category: FABRIC), (Description: Ingressq Driver encountered an error during access to the ASIC. The error may have been caused because of expected or unexpected software and hardware errors. In case, the error is a hardware error, Ingressq driver will reset the ASIC to recover.), (Recommended Action: If the error persists, please contact TAC suppport.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-LC_BAD_VRM_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that LC power-up failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-6-VERIFY_MSG
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-3-REG_PM_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The function call to pm_fault_register_device returned fail), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_LOF_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected OOF defect for incoming signal. For T1 mode OOF is declared when out of every four frame bits two or more frame bits are received in error. For E1 mode OOF is declared when three consecutive incorrect FAS is received. Also for E1 mode(CRC-4 framing) OOF can be declared when 915 or more CRC blocks out of 1000 are received in error. Additionally for E1 mode(CAS signalling) OOF can be declared when two consecutive multiframe alignment words are received in error or, for a period of one multiframe, all bits in timeslot 16 are zero.), (Recommended Action: 1) Ensure framing format on port matches framing format on the line. 2) Configure to other framing format to check if error clears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-NP_INIT_FAILURE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: NP Persistent Initialization failure Indicates a problem with the Network processor on the LineCard.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_PKT_MINLEN_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you configure an IP SLA operation in Cisco IOS XR?
### Response:
To configure an IP SLA operation in Cisco IOS XR, use the 'ipsla' command followed by the operation number and type (such as ICMP echo, UDP echo, or TCP connect). You can also configure the frequency, threshold, and reaction conditions for the operation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: ROUTING), (Description: A sysdb error occurred.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_MBE_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA11 burst FIFO multi-bit error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-LSR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: bfm encountered an error and is not able to recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_SET_LED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An I2C failure occurred while trying to set one or more of the alarm card LEDs.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-1-BACKUP_READY
### Response:
(Severity: 1), (Category: HA), (Description: RMF has determined that the backup process groups on the specified card are ready to take over as primary if it needs to.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-TOO_LONG_FEATURE_NAME
### Response:
(Severity: 7), (Category: OS), (Description: Too long feature name is specified), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_UCORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE uncorrectable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB encountered a Sysdb communication failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOSHAL-6-BUFFER_CARVE_MODE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'Any change in Buffer carve mode requires the LC to be rebooted to ' 'take effect.'), (Recommended Action: hw-module location <line-card-location> reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-BUS_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: SPA ERR_L interrupt is asserted by SPA when SPA bus protocol violation happens. This error happens mostly when there is an issue with hardware itself. The SPA reset is not going to recover the problem, hence SPA put into FAILED state.), (Recommended Action: Replace SPA hardware If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-3-SIZE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The size of received buffer is less than the required size. This will cause degraded perforamce in IPC calls.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-NOSELF
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal error occurred. An interface was not fully initialized when an OSPFv3 related event occurred.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 interface <intf name> - show ospfv3 <process-name> trace all - show running-config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-CONNECT_WARN_AN_NOT_ENABLED
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'autonomic connect will be enabled only after AN is enabled globally, ' 'and on this interface'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-PROVIDER_BRIDGE_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: STP on this router has been configured in provider-bridge mode, but has been connected to a router sending BPDUs in non-provider-bridge mode (or vice versa). This is a misconfiguration and could result in loops in the network.), (Recommended Action: Examine the STP configuration on this router and on the router to which it is connects on this port. Ensure that both routers have the same provider bridge mode configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-CLEAR_AFTER_SWITCHOVER
### Response:
(Severity: 3), (Category: ROUTING), (Description: Service-Layer had only partially replicated its database before switchover. The service-layer will return SL_INIT_STATE_CLEAR on the next connection indicating its database is empty.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_EA_TEST-3-ERROR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-EVENT_CONN_GET_FD_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to retrieve the file descriptor associated with the specified service. This is an internal error.), (Recommended Action: Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-CONN_SETRETRY
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS failed to set the linear retry period for connecting to sysdb. We set the retry period in order to avoid immediate reconnection attempt from clns to sysdb server when the latter restarts. This prevents clns from blocking on sysdb and cause any traffic drop.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA_BASE-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error has occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-ERR_DEBUG
### Response:
(Severity: 4), (Category: INFRA), (Description: CMPP encountered an error using the debug service. The error message describes what operation has failed and why it failed. The error could be caused by low memory resource or programming error.), (Recommended Action: In many cases, CMPP will recover by itself. If it does not then restarting the process may help. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_12_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-TPA_INIT_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Unable to init TPA.), (Recommended Action: Please capture show proc output and show logging output - 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL-6-INFO_PARAM
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A file management parameter has been changed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC_CTRL-6-ISSU_RELOAD
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An ISSU upgrade is in progress and this node requires a reload. When the upgrade is complete, this node will be restarted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_AMCC2035-7-INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message occured due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-GEN_ERR2
### Response:
(Severity: 3), (Category: ROUTING), (Description: General error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_BCDL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Server encountered the annunciated BCDL error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-3-RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: CCSQ, cpuctrl net interface encountered a CRC/Sync Error. This will result in the PIO or CDMA failure.), (Recommended Action: If it is possible to isolate the trigger point for the sn link error, collect all the necessary condition that caused the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTQ0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-4-NO_IP_ADDRESS
### Response:
(Severity: 4), (Category: SECURITY), (Description: There is no IP address configured for the specified interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-GET_MYNODEID_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_FAN_MISSING
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Fan Unit is Missing (SAT_FAN_MISSING) alarm is raised when the fan-tray assembly is not present in the CPT 50 panel.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_AB_INTR_IFIFO_ORUN1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_AB_INTR_IFIFO_ORUN1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_1_OFLOW_NPU2BR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-1 NPU to bridge instance-0 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G709-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified G709 Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-IMDR_CONN_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: A problem was encountered while trying to connect with the imdr process. There are a few steps involved while connecting and the error message indicates which step in the process failed and the reason that it failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SUSPENSION_STOP
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-AUTH_FAIL
### Response:
(Severity: 5), (Category: L2), (Description: Authentication was unsuccessful.), (Recommended Action: Recommended to check the configuration on both dot1x peers and connectivity between the authenticator and the AAA server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PW_INTR_LEN_DROP_CNT_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PW_INTR_LEN_DROP_CNT_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-3-ERROR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRS Platform Manager encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_NB_SERDES_0_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data north bound serdes link 0 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_SYSDB_SET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_RESET_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the Shelf Manager or Platform Manager encountered a critical alarm for the node specified. It will attempt to reset the board which sends the alarm.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-RESET_SP_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The hard reset of sp was unsuccessful due to the mentioned reason.), (Recommended Action: Reset of SP is typically initiated when that SP needs to be hard reset. If that fails, only a software reset be initiated. Please collect 'show cctl trace shelfmgr loc' from the node on which this ios-msg is seen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-MBI_DOWNLOAD_COMPLETE
### Response:
(Severity: 6), (Category: INSTALL), (Description: Status information for completion of MBI download.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_LQ_PKT_LEN_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 0 LQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure NTP in IOS XR?
### Response:
To configure Network Time Protocol (NTP), use the 'ntp' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#ntp server 192.168.1.101
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-EA_LTRACE_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace initialization failed within EA. Ltraces may not be printed), (Recommended Action: No action is required. Process will be automatically restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-EA_DEBUG_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Debug initialization failed within EA. Debugs may not be printed), (Recommended Action: No action is required. Process will be automatically restarted.Else try restarting manually. Get the job id 'show processes afmon_ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE policy-class feature?
### Response:
The MPLS TE policy-class feature allows the mapping of traffic to specific TE tunnels based on match criteria such as access lists, packet length, or QoS parameters. Policy-classes define the matching rules and the tunnels to which the traffic should be mapped. This provides granular control over traffic forwarding into TE tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the inventory manager process in IOS XR?
### Response:
The inventory manager process maintains an inventory of the cards installed in the system, including their current state and other relevant information.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-6-DOCKER_DAEMON_STOPPED
### Response:
(Severity: 6), (Category: INFRA), (Description: The Docker daemon has stopped. Docker related functionality will be unavailable.), (Recommended Action: Contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. if user did not stop the docker daemon.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_10_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable BGP graceful restart for MPLS L3VPN?
### Response:
To enable BGP graceful restart for MPLS L3VPN, use the 'graceful-restart' command in BGP configuration mode. router bgp 65000
bgp graceful-restart
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-6-INVALID_REQUEST_ID
### Response:
(Severity: 6), (Category: OS), (Description: There is miuse of library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-MFI_FREE_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: Important information about freeing labels. No reason fro alarm unless the message is displayed periodiaclly for several minutes), (Recommended Action: If the message is displayed periodically for several minutes, then restart ISIS. If the message continues to be displayed restarting for several minutes, then contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_2_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITCAM-4-usage_warning
### Response:
(Severity: 4), (Category: PLATFORM), (Description: There are not enough free tcam entries to meet the allocation request in the current region. However, there are un-used entries in other regions that can be obtained by this request through reloading the linecard.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_CMD-3-NOMEMORY
### Response:
(Severity: 3), (Category: INSTALL), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-6-MODE_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: This informational message indicates that PLIM interface mode changed to 'LAN' or 'WAN' from CLI.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-ERR_INFO_TBM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal software error during VPNV4 GTRIE processing by FIB on the RP. This may be a transient case.), (Recommended Action: Please collect the following info: <CmdBold>dumpcore running process <proc-name> location <node><NoCmdBold> The 'node' is the location where this IOS message was observed. The 'proc-name' is the process which generated the message. <CmdBold>show version<NoCmdBold> <CmdBold>show platform<NoCmdBold> <CmdBold>show logging<NoCmdBold> <CmdBold>admin show install active<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-5-ERR_CONT
### Response:
(Severity: 5), (Category: L2), (Description: This message indicates an error occurred beyond which execution of the pse_driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-STANDBY_PROXY_SPAWN
### Response:
(Severity: 7), (Category: HA), (Description: Multiple attempts to spawn a copy of the checkpoint proxy for this application on the standby were done, and the attempts have been stopped.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-SYS_CALL_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: QNX OS System call failed.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-WARN_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of CDP. CDP will restart and this should resolve the problem.), (Recommended Action: CDP will try to recover automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOPAZ_PFI-3-SET_GLOBALS_MMAP_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Memory map api failure in Platform PFI api. The returned error code should indicate the reason for the failure of the api. This is a transient error in the system likely due to low mem condition etc. The impact to system is minimal except that some global counters are not set. The client calling this api could retry it or handle it accordingly. If the issue is seen persistently, initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_AIS_DEMB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-PERF_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_HW_HEALTH_MON
### Response:
(Severity: 1), (Category: FABRIC), (Description: The fabric driver verifies the hardware interfaces between the various components on the fabric board. This is done on cold start (POST) and periodically there after. This message is annunciated when any of the tests fail.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-SRV6_INIT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred whilst initialising the SRv6 module. This could be caused by failure to allocate resources or by errors when calling the sidmgr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-1-DOP10_OFFLINE_CARD_RELOAD_ACTION
### Response:
(Severity: 1), (Category: OS), (Description: DOP10 OFFLINE event occured. Reload lc required.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_UPDOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface destination has changed operational state.), (Recommended Action: None. This is a solicited message (by 'logging event sub-lsp state' \ interface destination configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-NOTIFYTWICE
### Response:
(Severity: 4), (Category: SNMP), (Description: The given MIB attempted to register more than once for the given MIB notifications. This should have no detrimental effect on the behavior of the system.), (Recommended Action: Restart snmpd process.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_CHAR_ALIGN_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 char alignment error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_XAUI_PLL_LOCK_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI PLL not locked on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-ADJ_RES_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Could not adjust resource), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_PLIM_SB-3-SW_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An internal software error has occurred for the specified SPA.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-BADLENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The system received an OSPF packet with a length field of less than normal header size or inconsistent with the size of the IP packet in which it arrived. This indicates an error in the sender of the packet.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-MAC_LIMIT_PW_SHUT
### Response:
(Severity: 4), (Category: L2), (Description: Number of MAC addresses in the pseudowire has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the port, it has been shut down.), (Recommended Action: Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the port up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-FM_FEAT_PROCESSING
### Response:
(Severity: 3), (Category: OS), (Description: An internal fm feature registration function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-2-RC_INIT_ERR
### Response:
(Severity: 2), (Category: ROUTING), (Description: The route collapse IPC could not be initialized), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-RSI_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: MPP (Management Plane Protection) failed to bind to RSI (Route Space Infrastructure) to get the vrf information for each interface.), (Recommended Action: Restart the impacted process and see if the issue persists. If the issue recurs, then issue the commands 'show running-config control-plane' and 'show mgmt-plane trace client <clientname> both' to gather data and provide the gathered information and the exact error to the Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TSEC-6-DRIVER_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message gave an informative message. This is not a failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-NO_STATS
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA interface stats collection initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_MA-3-MERGE
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: The merge keyword must be configured to combine same-direction service-polices from different dynamic-templates for a session. This helps avoid any inconsistencies in seriver-policy.), (Recommended Action: Add the merge keyword to all service-policies that are to be combined. If issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SHMEM
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal Error: Shared memory error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_NI_INTR_CRC_ERR3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_CRC_ERR3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-GRUB_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: GRUB running on the indicated card is reporting an error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLDP_POLICY-3-ORA_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option dynamic attributes feature?
### Response:
The MPLS TE path-option dynamic attributes feature allows certain LSP attributes to be specified for a path-option without configuring an explicit path. LSP attributes that can be specified include bandwidth, priority, affinity, and setup and hold priorities. This provides a way to influence the dynamic path calculation with additional constraints.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-NOT_A_MANAGEMENT_NODE
### Response:
(Severity: 7), (Category: INSTALL), (Description: A function available only on management nodes was called on a non-management node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TSEC_SPP-3-RX_PKT_DROP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSEC driver on CPU received an errored packet. The packet was dropped.), (Recommended Action: The issue might not be very significant if it happened only once. If the message recurs, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show spp ioctrl location <LC/RSP><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show spp ioctrl location <LC/RSP><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXMGR-2-HW_STRAP_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIE device hardware strap error), (Recommended Action: Please reload the board using the following command: 'reload location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-3-NULL_POINTER
### Response:
(Severity: 3), (Category: L2), (Description: A Null pointer is recieved at particular line and function in question. This should not happen in normal scenario. This message would indicate reason as well.), (Recommended Action: This error indicates a problem in the code and cannot be easily recovered from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON-3-PM_HEARTBEAT_MISS
### Response:
(Severity: 3), (Category: INFRA), (Description: Sysadmin process manager liveness check failed. Sysadmin will reboot if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_IM_CAPS_DATAPATH_CONTROL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error while sending dpc message.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-7-EDM_INTERNAL
### Response:
(Severity: 7), (Category: OS), (Description: The server's EDM has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-2-ERR_EIO_TRAIN
### Response:
(Severity: 2), (Category: FABRIC), (Description: Repeated attempts to train the EIO links to the neighboring Asic have failed. No further attempts to retrain the link will be made.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_MAC_IF_SES_THRESHOLD_EXCEED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address on the given access interface has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HORSE-2-ERR_RC
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Error in HORSE operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-PTHREAD_API_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Pthread API returned an error), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-4-INVALID_TLV
### Response:
(Severity: 4), (Category: ROUTING), (Description: Failed to send data due to the limitation of the buffer size. This is an internal error. It requires to reduce the number of interfaces.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOW_VERSION_CMD-7-IFMGR_BIND
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A Version Manager CLI command was unable to bind to the interface infrastructuree from which it obtains information. The command will not contain all expected information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How is the IS-IS router ID determined in Cisco IOS XR?
### Response:
By default, the IS-IS router ID is automatically generated based on the highest IP address configured on the router's loopback interfaces. It can also be manually configured using the 'router-id' command under the IS-IS instance configuration mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-HSSD_GET_DATA_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to read data from the packet HSSD area.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver version is not compatible with the hardware version.), (Recommended Action: Upgrade the Interrupt controller FPGA image using FPD procedure. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-PM_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The SLA Profile Manager failed to cleanup correctly. It will exit anyway, and no further errors should be seen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-NO_TRANSLATOR
### Response:
(Severity: 7), (Category: HA), (Description: A required translator was not loaded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-DOCKER_RM_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr has errored or failed while trying to remove a docker container. This means the underlying docker rm operation has failed, and that the docker container specified may continue to exist. This may lead to conflicts if the application is activated again before this is resolved.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-SYSDB_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while communicating with sysdb.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_6
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PUNT link has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-SOCKET
### Response:
(Severity: 3), (Category: ROUTING), (Description: The above specified socket operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-GI_FILES_CREATED
### Response:
(Severity: 6), (Category: HA), (Description: Information captured by various modules and stored in bootflash during a previous reset has been moved to hard disk.), (Recommended Action: Examine the dump information for possible root-cause for a previous reset. Use the wd_test utility.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_3_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_LAS
### Response:
(Severity: 4), (Category: L2), (Description: IPV6CP encountered an error using the LAS API. The error message describes what operation failed. This may be a resource starvation problem or an internal programming error.), (Recommended Action: Restart the local ipv6_ma process and/or the ppp_ma process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_3_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-7-DEBUG_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug. The facility to debug the component may not work.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_BAG
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the Bag Client library. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error. The error will affect PPP MA's ability to provide operational management data, but won't otherwise affect PPP MA's operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_7_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_RIB
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error encountered by RIP during interaction with RIB.), (Recommended Action: These messages are expected during RIB process restart. In all other cases, please contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_VLAN_EA-3-MAX_HSRP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HSRP ID is greater than 255, not supported. Configure HSRP ID less than 255.), (Recommended Action: Please capture the complete error log. Please check the data sheet for the supported configuration. Please contact TAC for any support on this)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR ensure software package integrity during installation?
### Response:
Cisco IOS XR ensures software package integrity during installation through the use of digital signatures and checksum verification, preventing the installation of tampered or corrupted packages.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-ACTION_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: A user requested install operation has errored and failed. The operation cannot proceed further as there is no active RP on which the install operation was successful.), (Recommended Action: If possible, the IOS-XR install infrastructure will have recovered the system to its state before issuing the command that triggered this operation. Otherwise, the following recovery options are available: 1. Abort the operation to return to its previous state. This will not cause XR processes to restart or nodes to reload. 2. Reboot the system to return to the committed state. Note further that: - The install operation history records full details of the operation, including its outcome on every node on the system, and the final state of the system. - If any of the recovery options is not available for the current failure, it will be rejected when attempted (with no impact on the system). So it's always safe to try the preferred recovery mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-INTERFACE_DATA
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS was unable to look up local interface information. As a result the system may not be able to send/receive ISIS packets over this interface. This may be due to problems with either CLNS or the forwarding infrastructure.), (Recommended Action: Please contact cisco-support with the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5345_CLOCK_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Si5345 clock failure/success for the given serdes towards RSP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-6-ERR_ASIC_GENERIC
### Response:
(Severity: 6), (Category: FABRIC), (Description: Fabricq encountered an interrupt that has exceeded its threshold value. Software takes appropriate action to log and fix the error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp update-delay' command in IOS XR BGP configuration?
### Response:
The 'bgp update-delay' command is used to configure the maximum time that BGP will delay sending updates to neighbors after the BGP process starts. By default, when the BGP process starts, it immediately sends out updates to all neighbors. In a large network, this can result in a significant amount of processing on the neighbors. The update delay allows the BGP process to stagger the sending of updates, reducing the processing load on the neighbors.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_AGORA_ALM_TYPE_THREE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: AGORA type three alarm.), (Recommended Action: If the problem persists, call your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does the sporadic scheduling algorithm work in IOS XR?
### Response:
With sporadic scheduling, a thread is assigned a normal priority, low priority, budget time, and replenish interval. The thread runs at normal priority until it exhausts its budget, then drops to low priority. After the replenish interval, the budget is restored and the thread returns to normal priority. This allows important threads to execute while preventing CPU starvation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_XAUI_RDY_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI not ready on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-6-VIRTUAL_IP_CHKPT_RESTORE
### Response:
(Severity: 6), (Category: INFRA), (Description: Virtual IP addresses known to kim are stored in a Checkpoint database, so that on process restart, kim is able to remove any virtual IP addresses that may have been removed while kim was not running. If the Checkpoint restoration fails, then kim will be unable to clear stale addresses from Linux.), (Recommended Action: No action should be required. Stale addresses on Linux lo:virtual-ip interfaces that do not correspond to a virtual IP configured in XR can be removed, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-STARTUP_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: locald process failed to startup properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KENSHO_GL-3-LTRACE_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace initialization failed. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-DEV_XFP_OPTICS_PORT_UNSUP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An XFP Module not supported for the port error was detected during XFP initialization. An XFP Module not supported for the port error is reported when Optics is not supported on the port. The XFP is the pluggable optics on the line cards. XFP initialization may happen when linecard boots up, XFP OIR and line card process restart.), (Recommended Action: Verify that the XFP Module is supported for the port. Replace the XFP with a working one (if any) to isolate bad optics. Check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the command 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-6-INSTALL_RESTART_XLNCD
### Response:
(Severity: 6), (Category: INFRA), (Description: The Install component has detected a change within nb.bpf or the XLNCD binary. The following will happen, all capture sessions deleted, all EXI interfaces deleted, and all 'to_xr' interfaces will be deleted, then the XLNCD process will restart.), (Recommended Action: Please wait for XLNCD to restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-SYSDB_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Sysdb initialization failed during PFM process startup. This means that the card reset disable feature may not work on this node as per configuration.), (Recommended Action: Manually restart pfm_node process on the node and see if the Sysdb initialization is successful during this attempt.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOFRR_FLOW-3-DETECT_LOSS_BACKUP
### Response:
(Severity: 3), (Category: ROUTING), (Description: LC control plane detected that either no traffic coming or traffic loss is occurred on backup path. Data plane should switch over to the MoFRR primary path already. But somehow the traffic switchover notification message sent from data plane has been lost from NP on the way to LC CPU. With this detection, control plane will re-sync with data plane on MoFRR route.), (Recommended Action: It is a self-recovery detection. There is no extra action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-6-SERVICE_UNAVAIL
### Response:
(Severity: 6), (Category: OS), (Description: Service state has become unavailable. SSM process will try a recovery action. They are not necessarily critical errors but need investigation by DE.), (Recommended Action: Collect system logs. Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_CLI-7-INVALID_ARG
### Response:
(Severity: 7), (Category: HA), (Description: An argument was passed with an invalid value.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-3-ERR_NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: HSRP was not able to allocate the memory that it needed to complete the operation. HSRP functionality may be reduced until the problem is resolved.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-SAT_CPM_INIT_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to failure on register with CPM for satellite communication. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_8_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-XAUI_1_FRAG_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported fragmentation error on TX side on bridge instance - 2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-3-LIST_INSTANCE_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Unable to list all instances, this may be due to node down or program level error.), (Recommended Action: Try to rerun the CLI , if it fails again please contact support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-TIMER
### Response:
(Severity: 3), (Category: ROUTING), (Description: FIB internally manages sone activity using 'timers'. An error occurred while initializing timers. The process will attempt to recovery by restarting. If the restart count is excessive then the node may reload. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-IF_CONFIG_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPGAMGR-3-LTRACE_OPEN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Due to an error in the ltrace initialization routines, the init failed. This may be due to other problems on the system (is ltrace running?).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-6-IPACCESSLOGNP
### Response:
(Severity: 6), (Category: ACL), (Description: Packet matching the log criteria for the given access list was detected. These messages are issued when the IP protocol type is other than TCP, UDP and SCTP. This message is seen for the first match and for each match after the hit count is greater than 0x7FFFFFFF(2147483647).), (Recommended Action: This is information only message, no action required No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_OPEN
### Response:
(Severity: 3), (Category: IP), (Description: An unexpected error occurred when RloginD tried to open a VTY character special file.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-3-REPLY_MSG_SENDING
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred while sending a reply LWM message to a client. It can be a data or an error number reply.), (Recommended Action: Please check the error message and take corrective actions if necessary. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_SN_NO_BW
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPP_TCAM_RM-3-NONFATAL_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is a error message in the CPP TCAM RM to indicate anomalies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved. *RECUR*), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure tcam resource-manager usage location < > * *SH_CMD show controllers pse qfp infrastructure tcam resource-manager error parity location < > *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-6-LC_READY_INFO
### Response:
(Severity: 6), (Category: OS), (Description: Linecard is in ready state.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of configuration templates in IOS XR?
### Response:
Configuration templates in IOS XR allow you to define a common set of configuration commands that can be applied to multiple entities, such as interfaces. This promotes consistency and reduces configuration errors.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_CREATE
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when creating Event Manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-DEACTIVATE_DONE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package deactivate requested on this satellite has completed. Run 'show nv satellite status' for more information.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-RDB_NO_LSA
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPF found inconsistency between a database entry and its associated path.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTEG_SWITCH-2-LINK_STATE_CHANGE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: When the process starts, port state oscillate between up and down and finally the port state will become up. While configuring also port link state change message information displayed. Except the above two scenarious, if port state change occurs please contact TAC support.), (Recommended Action: Please restart the process 'process restart integSwitch' and verify the port state 'show controller switch ports location all'. If it not recovered please collect (admin)Show tech-support control-ethernet and contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-ERR_EVENT_ATTACH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to attach event to event manager.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*.Else try restarting manually. Get the job id 'show processes afmon_ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-INVALID_64K_INPUT_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The 64k composite clock signal has been invalidated possibly due to loss-of-signal condition or AMI violations.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Ensure valid 64kHz + 8kHz Japanese timing signal(defined in G.703 Appendix II.1) is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-IN_DEP_LIST
### Response:
(Severity: 6), (Category: HA), (Description: This message is emitted if the misbehaving process is one that wdsysmon depends on. It will not be terminated.), (Recommended Action: The command 'show watchdog trace' will display additional information about the process. Forward this information to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-CAN_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The shelfmgr could not initialize its CAN Bus Interface, due to the reason mentioned in the message. The shelfmgr will attempt to recover by restarting up to 5 times. If the issue persists, the RSP will be reset which will cause the standby RSP to take over as active.), (Recommended Action: None, since the system will perform recovery action automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ACL_PARSE-7-ERR_THREAD_MUTEX_LOCK
### Response:
(Severity: 7), (Category: ACL), (Description: A mutex is used to protect the ACL and Prefix List caches. An attempt to lock a mutex failed with the error reported.), (Recommended Action: Abort the configuration operation and restart the parser server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIO-7-ERR_REGISTER_GET
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The EIO library encountered the annunciated register access error. This could result in inconsistent behavior of the device/system.), (Recommended Action: Run diags on the board. If it is possible to isolate the trigger point for the read failure, collect all the necessary info (condition) that caused the error. Reload the MSC to avoid inconsistent behavior of the system because of this read failure. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMA-3-INCORRECT_BW_UPDATE
### Response:
(Severity: 3), (Category: L2), (Description: When the indicated member link was deactivated, group bandwidth could not be updated correctly as decrementing the link's bandwidth would have made the group bandwidth to go below zero. Group bandwidth is now made zero.), (Recommended Action: Check the group and member interface status. Verify that the group bandwidth is correct now. If not, shut all the members of the group and then no shut all the members to bring back the group bandwidth to correct value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-SFP_XCVR_TYPE
### Response:
(Severity: 2), (Category: L2), (Description: This message indicates that the unsupported SFP type is inserted.), (Recommended Action: - Check the SFP, make sure it is CISCO certified - Insert the supported SFP types)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_MISSNAME
### Response:
(Severity: 4), (Category: SYSDB), (Description: The command entered requires an item name and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-INSTALL_ISSU_AUTO_ABORT_TIMER_NOT_FOUND
### Response:
(Severity: 4), (Category: INSTALL), (Description: Auto-abort timer was expected (per user options specified) but not running after RUN phase.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-3-NOMEM
### Response:
(Severity: 3), (Category: OS), (Description: The client library has failed to allocate the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-PORT_DOWN_WITH_REMOTE_FAULT
### Response:
(Severity: 3), (Category: INFRA), (Description: Port is down due to Remote Fault.), (Recommended Action: Check for port status, connectivity and note the trigger To recover reset the switch.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-IDB_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to delete an interface descriptor block from the idb WAVL tree.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA_CAPI_SERVER-3-IOFPGA_RD_WR_CHK
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-INFO_SHM
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered a change in the shared memory region parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_UCORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory uncorrectable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_PORT_0_SENDING_AIS
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in T1 and E1 modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_AGENT-3-BACKUP_BIOS_LOADED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The Backup BIOS images on BIOS SPI Flash has been loaded on the indicated card. The output of 'show hw-module fpd' will show the affected images with BACK IMG state. This can happens when Primary BIOS Flash is corrupted, so it fallback to load the backup image set to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for BIOS to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-BOOT_RECOVERY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-DLLMAIN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error message from DLL initialization module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-7-FAILOVER_ENABLED
### Response:
(Severity: 7), (Category: HA), (Description: Redcon has notified the card failover has been enabled by the configuration.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-NP_DOWN_EVENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Process fib_mgr receives NP down event notification at the linecard. This is for information and event timestamp logging purpose only. No additional action is required.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTQ1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-6-BEST_MASTER_CLOCK_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: The best master clock available to PTP has changed.), (Recommended Action: This message is for information only, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_XRV9K_NETIO_LIB-4-FINT_IDB_NOT_FOUND
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The FINT IDB is not yet created in NetIO. This could be a transient condition.), (Recommended Action: Please capture the following information and if traffic loss also is being observed: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-6-OPTICS_INSERTION
### Response:
(Severity: 6), (Category: L2), (Description: Optics module has inserted), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_EGR_Q_ERR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-GWCTX_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to initialize the gateway context database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_UPD-3-BACKUP_BIOS_LOADED
### Response:
(Severity: 3), (Category: INFRA), (Description: The Backup BIOS images has been loaded on the indicated card. This can happen when process detects that the Primary image is corrupted, and the HW fallbacks to load the backup image to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for FPGA to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP maximum-prefix feature?
### Response:
The maximum prefix feature allows a maximum number of prefixes to be configured for a BGP session. If the number is exceeded, the session can either be torn down or a warning can be logged. This protects against misconfiguration or DoS attacks. It is configured with the neighbor maximum-prefix command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: OS), (Description: ITAL Initialization failed. The message displays the failed operation and the error code. ITAL connects with various servers to get required information for process from which it is invoked. It might lead to unstable state of the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_INTF_STATS
### Response:
(Severity: 3), (Category: L2), (Description: It was not possible to register for stats collection on the specified interface. The entry in the 'show interface <name> accounting' command is likely to be inaccurate for CDP packets.), (Recommended Action: Try restarting CDP and the Statistics server process on this node. proc restart cdp location <node> proc restart statsd_server location <node> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_KEYWORD
### Response:
(Severity: 3), (Category: OS), (Description: Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-WARM_RLD_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Card seems to have been cold reloaded after an attempt to warm reload the card.), (Recommended Action: Capture the shelfmgr log and use the 'show shelfmgr trace' CLI in admin-mode to fetch debug information. Also capture sysmgr_nv.log from LC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-ENABLE_PORT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to enable ports. This error could occur for two reasons. 1. The system is low on resources. 2. A hardware error or an error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-TX_ALARM_OC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BITS transmitter has detected an open circuit condition.), (Recommended Action: Ensure cable connection between the configured interface port and external equipment.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-5-BATCH_ERROR
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified error was encountered in the OSPF RIB batching code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR manage configuration during package activation and deactivation?
### Response:
During package activation in IOS XR, any new configuration options introduced by the package become available. During package deactivation, the configuration related to the package is automatically removed to ensure consistency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY-4-SYSDBUNBIND
### Response:
(Severity: 4), (Category: OS), (Description: The filecopy_process was unable to unbind from sysdb when shutting down. This may result in a failure to re-register with sysdb when the process is restarted later. Collect show tech-support sysdb on the location where this error is seen.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-STATS_SYNC_DISABLE_FAIL
### Response:
(Severity: 4), (Category: INFRA), (Description: An error was encountered when attempting to remoce statistics synchronization configuration for the named interface. This is likely to result in the Exposed XR Interface in Linux continuing to report the same statistics values as were synchonrized from IOS-XR before the error was seen.), (Recommended Action: Try re-adding and then removing statistics-sychronization configuration for the affected interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EEM-3-ACTION_SYSLOG_LOG_ERR
### Response:
(Severity: 3), (Category: HA), (Description: The action_syslog call from tcl script.), (Recommended Action: Please verify command(s) mentioned in tcl script prior to error message are working fine (on router prompt). If issue is still seen then please provide command details which has resulted into this error condition to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FSMTIMEOUTA_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is not able to boot up. This is because the timer A has expired on this node before any boot request was recieved by shelfmgr from this node, after the node has reached the ROMMON state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOFRR_FLOW-3-DETECT_ACTIVE_BACKUP
### Response:
(Severity: 3), (Category: ROUTING), (Description: LC control plane detected that traffic is already coming on backup path which is currently the selected path for forwarding traffic to egress LCs. Then set the HW watchdog of ingress NP to monitor traffic loss event on the path instead of monitoring traffic activity.), (Recommended Action: It is a self-recovery detection. There is no extra action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACL_CONFIG_MIXED_MODE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL being attached is of different mode than existing ones in the same NPU of the same lookup.), (Recommended Action: Remove all ACLs from interfaces of the same lookup type in the same NPU or stay with the current prevailing ACL mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR_ASIC-3-FMEA_INTR_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: 'FMEA interrupt based fault found'), (Recommended Action: Reboot the device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_EDM-3-DATALIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-3-DEBUG_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Initialization of the debug event failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-1-UNSUPPORTED_CONFIG
### Response:
(Severity: 1), (Category: DRIVER), (Description: Card manager has detected that the chassis contains unsupported configuration of cards. Operator has to take action and remove unsupported card from the chassis), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSHELL-3-WS_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialization of functionality in getline library failed for reason mentioned in the error message. The whitespace completion behaviour could not be modified.), (Recommended Action: Exit the shell and get into the shell again. This would re-initialize the libshell library and error messages should no more appear. If the error message, persist; then undo the cli whitespace completion configuration from the line and call you're technical support representatives for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the interface preconfiguration feature in IOS XR?
### Response:
The interface preconfiguration feature in IOS XR allows the configuration of an interface before the interface module or line card is inserted into the router. When the module is inserted, the pre-configured settings are automatically applied.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-WAIT_NULL0_INTF
### Response:
(Severity: 6), (Category: ROUTING), (Description: NULL0 interface not up yet), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-VC_NOTFOUND
### Response:
(Severity: 3), (Category: L2), (Description: An operation was performed which expected a VC with the specified DLCI to exist, but it doesn't), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LNS_EA-4-ERR_RWMGR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: LNS EA encountered an error communicating with Rewrite Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Rewrite Manager Server process, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, LNS EA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-IM_INVALID_BOARD_ID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Invalid Board ID read from IM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TURBOBOOT-4-ROMMON_VARIABLE_NOT_SET
### Response:
(Severity: 4), (Category: INSTALL), (Description: 'The TURBOBOOT rommon variable was not set to 'on'. The system has ' 'membooted. Set the TURBOBOOT variable to 'on' to prepare the system for' 'diskboot.'), (Recommended Action: 'Membooted system is not advisable. Diskboot the system by reloading the' 'system with the TURBOBOOT rommon variable set to 'on'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKEND-7-INTERNAL_PATH
### Response:
(Severity: 7), (Category: SYSDB), (Description: The backend library has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-ID_CERT_EXPIRED
### Response:
(Severity: 3), (Category: LICENSE), (Description: The device has not communicated with Cisco for an extended period of time and the device has not automatically renewed the device registration with Cisco.), (Recommended Action: Please check the Smart Call Home settings and network connectivity to cisco.com.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_SPURIOUS_INTERRUPT
### Response:
(Severity: 3), (Category: FABRIC), (Description: An interrupt is generated but the interrupt status register indicates no pending interrupts. This may be due to a hardware error where the interrupt line is stuck in its active state i.e. active low.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-LICENSE_EXPIRED
### Response:
(Severity: 4), (Category: LICENSE), (Description: The specified feature's evaluation license has expired. The feature will no longer be usable. The message appears even if the feature is not currently configured.), (Recommended Action: In order to continue using the feature, obtain a license and install it using the 'license add' command in admin mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM-3-STATS_CALLOC_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Due to memory allocation failure for stats array, g_spa process needs to be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - Restart the g_spa process. - Check for memory conditions in the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-6-COMPLETED_WAIT_FOR_NP_UP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: New NPs are up now. Waiting is complete.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-3-MSG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in the cgv6 services process during process initialization or process communication.), (Recommended Action: collect the info from 'show diag', 'show platform', 'show inv', 'show logging')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_SERVER-3-ACT2_AUTH_STATUS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ACT2 Authentication status for RP.), (Recommended Action: - PASS : No action required. - SKIP : Reason for skipping is mentioned in the message. Contact TAC, if there is discrepancy in the reason. - FAIL : Card will reload. Immediate action required. Contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
METRO_STATS-7-ERR_EXHAUST
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the Hardware Stats Manager to indicate the stats counters of the particular stat type is exhausted. In most cases these messages will stop once the temporary condition is resolved. Examples of when this error occurs are: 1. The client tries more counters than that are free for that type), (Recommended Action: No action is required. These are Debug messages. An error was returned by Stats Manager to applications. Applications receiving this error will report the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-EVENT_CONN_NOTIFY
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An internal error was detected when trying to set notify handler for connection opens, closes and errors.), (Recommended Action: In this case the process may not be UP yet. There is a retry mechanism to handle this issue. If the issue continues, restarting netio and lpts_fm may fix.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-SIGNAL_RELATED
### Response:
(Severity: 3), (Category: MEDIA), (Description: Some signal related function returned with an error.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_CORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory correctable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
eth_gl-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The indicated process failed to initialize. Previous messages may give the reason. The process will automatically restart and retry. Until it succeeds, Ethernet functionality may be impacted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BMP-3-DLL_INIT
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-RIB
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred on a request to the RIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 <process-name> trace all - show ospfv3 routes - show route ipv6 <prefix> detail - show rib ipv6 clients. Find the client ID of the bcdl process that is in the insync state to plug into the next command. - show rib ipv6 client-id <bcdl-id> redist history)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-SYSDB_DATALIST_CREATE
### Response:
(Severity: 4), (Category: OS), (Description: An internal sysdb function failed. When this issue happens, it will trigger an automatic restart of pifibm_server_lc process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_PERF_DATA_POOL_EXHAUSTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_DEBUG-3-REGISTER_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-SCHED_SETSCHEDULER
### Response:
(Severity: 7), (Category: HA), (Description: The sched_setscheduler() function returned an error which is indicated in the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CETHHA-2-PORT_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The rate of link errors on the control ethernet port has exceeded the threshold. The link should be fixed to avoid disruption in router services.), (Recommended Action: Fix the bad link after switching traffic to redundant link.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP temperature greater than or equal to the high temperature warning threshold. The XFP is the pluggable optics on the line cards. The temperature threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational, and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the command to display OSPF neighbor information in Cisco IOS XR?
### Response:
To display OSPF neighbor information in Cisco IOS XR, use the command 'show ospf neighbor'. This will display a list of OSPF neighbors, their state (FULL, 2-WAY, INIT, etc.), the interface they are reachable through, and the length of time they have been in their current state.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-DPC_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred during the Data Path Control send operation. The DPC message sent here is to update state change/db in EA.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
deflate-3-process_file_error
### Response:
(Severity: 3), (Category: OS), (Description: Deflate cannot process the file for uncompression due to the reason given in the error message), (Recommended Action: Please check the input file to be valid if the error is due to user entered CLI. Please capture show log and error messages if the error is not due to user entered CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_NETIO-7-DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when cleaning up debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-EA_SHM_INIT_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: QoS_EA failed to initialize stats shared memory(after retry count = 5). QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.), (Recommended Action: Take a look at the system memory and the processes which are running. Restart QoS_EA process when the memory usage goes down.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HYPHY_FRAMER-3-HYPHY_ASIC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-SATELLITE_REDUNDANCY
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-TMA_CLUSTER_PARITY
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-6-NON_DRP_PRIMARY
### Response:
(Severity: 6), (Category: HA), (Description: This is an informational message output during SDR configuration commit time only if a non-RP or non-DRP node is being assigned as primary to the SDR. Please note that if the node is not in IOX-RUN state, it's node type will not be determined.), (Recommended Action: Verify the card type in the slot being configured as primary for the SDR. If not a DRP or RP card, please replace with valid card type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-SVC_INVALID_STREAM
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information %d - is the stream identifier.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-6-NOT_ENOUGH_MAC_ADDRESSES_RESYNC
### Response:
(Severity: 6), (Category: SERVICES), (Description: The Interflex Manager was unable to obtain enough MAC addresses for the configured Interflex interfaces. The system has a finite number of MAC addresses in the hardware, which are all currently used.), (Recommended Action: A MAC address should be manually assigned to any Interflex interfaces which were unable to obtain one from the hardware.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-INTERFACE_PORTS
### Response:
(Severity: 4), (Category: MGBL), (Description: The total number of ports could not be determined for this interface. Configuration manager will not be able to determine if there is any more configuration for remaining ports.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-EOBC_LINK_DOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link on epm switch device is down), (Recommended Action: '*show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ATM_V2-3-SHEM_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: SPA process encountered an internal software error. SPA is in not ready state . Shared memory is initialized with in inconsistent state.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN-3-RSI_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to extract nodeid to rsi value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_EA-3-FORWARDER_CONNECTION
### Response:
(Severity: 3), (Category: SERVICES), (Description: The forwarder driver has restarted, but this process was unable to handle this as the error was unexpected. It is possible, though not necessarily true, that slow path packet processing for some interfaces owned by this process may be broken.), (Recommended Action: Restarting the relevant SVI Manager process will prompt a resync, which should get the SVI Manager process and forwarder driver back into step. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-FANTRAY_VER_MISMATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Fantray version is different from the existing one. This is not a critical condition.), (Recommended Action: Verify the fantary version, give CLI: (admin)# show diag --> particularly fantray output Use same fantray version based on the requirement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_SBE_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA00 burst FIFO single bit error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_HIGH_VOLT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when one of the voltage sensors on satellite has crossed higher threshold.), (Recommended Action: No recommendation)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-SYSDB_BIND_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XCVR-6-ENABLE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Add device to list of devices on spa plugin which refers to the xcvr which is added is enabled and ready %s - xcvr type), (Recommended Action: This is just an informational message No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XRV9K_FIB-6-EVENT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The messages indicates a specific event or milestone has occured.), (Recommended Action: No action needed. This is an information message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-6-PRINT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Printing the data for test purpose from the database.), (Recommended Action: This is informational print only, no action to be taken.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8508-2-BIST_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There was a failure in built-in self-test of PCIE device), (Recommended Action: Please reload the board using the following command: 'reload location <>' If the issue persists please, contact your technical support representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-UIDB_INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is typically an internal error in the software. The software failed to initialize a connection to another process in the card where the error is seen.), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea. If the problem persists, copy the error message as it appears on the console and any noticeable side effects. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-ISSU_NOTIFICATION_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred when sending a notification for ISSU. If the ISSU operation succeeds, then this warning can be ignored; if not, then this warning may give an indication of why the ISSU operation failed.), (Recommended Action: Follow the recommended action specified by the ISSU processes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSC-7-ERR_DEBUG_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric statistics client library encountered debug facility registration failure. When this error happens, the library will not able to enable debug.), (Recommended Action: Restart Fabric statistics client manually if the error is persistent.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-EVC_INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the CGN process on a particular node. The errors were seen during event connection operation. The process will be restarted. The issue is during event conneciton operation. This will impact the functionality of CGN.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_BKP_TUN_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the auto-tunnel backup aborted since it would have exhausted the tunnel interface scale limit), (Recommended Action: Reduce configured/auto tunnels to below the system scale limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-COLD_RESTART
### Response:
(Severity: 7), (Category: HA), (Description: Due to too many contiguous failed restarts, sysmgr has requested that the process be restarted without CDM data.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-MEMORY_RECOVERY_KILL_PROCESSMGR
### Response:
(Severity: 6), (Category: HA), (Description: The process has been killed in an attempt to recover system memory. The process can be manually restarted if desired, but may continue to consume large amounts of memory.), (Recommended Action: The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE1_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE1_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-MAL_DATA_BUFF_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Info about media access lib, used to communicate with linux ethernet device driver. %x- Payload bytes 25,26,27 and offset.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-SIGNAL_RCV
### Response:
(Severity: 6), (Category: INFRA), (Description: ESD has received a signal. This may be user initiated or could indicate an error. ESD may exit as a result.), (Recommended Action: Check the signal type. If not user initiated, then root cause of the signal needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-FAILED_RELOAD_NODE
### Response:
(Severity: 2), (Category: INSTALL), (Description: The installation required a reload of the dSC node, but the reload failed. The software installed will now be in an inconsistent state.), (Recommended Action: Execute the command 'hw-module location <location> reload' for the specified node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_ENTRY_FIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to find an entry for the file to be deleted.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-MULTICAST_IGP_MTR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_XR_HB_TIMEOUT_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card is being reset because of a failure to get XR heartbeat from a specific node. This is an indication of an error condition during MBI RUNNING state.), (Recommended Action: If the problem persist, collect the reset debugs collected under the harddisk:/shelfmgr_debug directory (debug files collected for each node will be created under its own subdirectory), log files under the harddisk:/bcm-logger/ (under last couple of sub-directory) and the output of 'show tech-support install', 'show tech-support shelfmgr' and 'show tech-support control-ethernet' commands before contacting Cisco for technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-STALE_TLV
### Response:
(Severity: 3), (Category: L2), (Description: CDP received a notification to update a TLV that it sends but failed to do so due to the error given. The information stored by CDP is now out of date.), (Recommended Action: Perform 'cdp disable', 'cdp enable' on the interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSH_IPC_EM-3-EVM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OSH IPC ethernet media event manager initialization failed.), (Recommended Action: restart the process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_LMRIB_TUNNEL_RW
### Response:
(Severity: 3), (Category: ROUTING), (Description: A LMRIB Tunnel Rewrite related error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng -show lmrib client trace for further analysis of the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-5-NOTIFICATION
### Response:
(Severity: 5), (Category: OS), (Description: Normal but significant conditions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-MALLOC
### Response:
(Severity: 3), (Category: L2), (Description: Memory allocation failure detected. The node might have run out of memory.), (Recommended Action: Should check memory conditions on the system)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-ERR_LTRACE
### Response:
(Severity: 4), (Category: INFRA), (Description: CMPP encountered an error using the Lightweight Tracing service. The error message describes what operation has failed and why it failed. This is a fatal error and the CMPP process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_REGIST_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: API Version registration failed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-3-topology_inconsistencies
### Response:
(Severity: 3), (Category: OS), (Description: The topology database is in an inconsistent state after BGP-LS updates.), (Recommended Action: Enable 'debug segment-routing traffic-eng error' for detailed information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different IPC mechanisms available in Cisco IOS XR?
### Response:
Cisco IOS XR supports several IPC mechanisms suited for different use cases\n- Lightweight messaging (LWM): Synchronous, connection-oriented, intra/inter-node\n- Group services protocol (GSP): Asynchronous, connectionless, multicast-based\n- Bulk content downloader (BCDL): Uses GSP to efficiently download large data sets\n- Qnet protocol: Extends message-based IPC transparently across nodes\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-USER_INFO2
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The info about the total number of users of the specified resource.), (Recommended Action: It is an informational message along with packet depletion log message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-SLOT_INSERTION_THRESHOLD_MAJOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Backplane slot connector has card insertions exceed threshold major per current counter statistics.), (Recommended Action: Give CLI: (admin)# show plugin slot counts location <node> Service the backplane slot connector, contact Cisco TAC for assistance. If possible, reduce the frequency of card insertions into this backplane connector. Current insertion counters may be cleared with (admin)# clear plugin slot location <node>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_SCRUB_THRESH
### Response:
(Severity: 5), (Category: PLATFORM), (Description: ASIC errors have occured and need memory scrubbing, such errors have crossed threshold.), (Recommended Action: Errors have been handled. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_CONN_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-PIFIBM_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to initialize the Pre-IFIB Mgr.), (Recommended Action: Please share the output of the following commands: - show tech-support lpts - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP targeted session?
### Response:
To configure an LDP targeted session, use the 'targeted' command under the MPLS LDP neighbor configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#neighbor 192.168.1.2 targeted
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE3_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE3_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIRROR-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'mirror encountered error, see message for more details'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LWMESS-7-CORRUPT_CLI_SKIP
### Response:
(Severity: 7), (Category: OS), (Description: A corrupt memory area was discovered in an internal data structure. A function that was searching the open connection list was not able to process all open connections.), (Recommended Action: This is an internal error and should be reported to TAC. Take a memory dump and try re-starting the offending application.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-SYSMGR_PR_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: CGN_MA failed to send process ready notification to sysmgr, the process will restart under this scenario.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-UNLINK_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Could not delete a file. This might impact dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-DCDC_SEND_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has failed to send a dcdc_enable request to the remote board.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FSMTIMEOUTB_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is not able to boot up. This is because no mbi-hello heartbeat has been recieved by shelfmgr within the time specified by timer B.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_0_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-BOARD_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being shutdown because it is not supported on the CRS-4 platform.), (Recommended Action: Remove the unsupported board and replace it with supported hardware.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-COND_WAIT
### Response:
(Severity: 3), (Category: OS), (Description: Error signaling cond variable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_FPD-3-CPA_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in CPA interface.), (Recommended Action: action mentioned in the message should be taken.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTIO-4-PULSE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The VTIO SPP plug-in failed when attempting to communicate between threads.), (Recommended Action: If any problems are seen, they may be rectified by restarting the spp process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-3-MHOST_DEFAULT_PIM
### Response:
(Severity: 3), (Category: IP), (Description: When multicast routing is turned on PIM will choose a default interface, based on whether the default has been configured and it's enabled state. An error was encountered in making PIM provided interface as mhost default interface.), (Recommended Action: Change the mhost ipv4 default-interface configuration to some other physical or virtual interface. Collect the output of show tech-support, show arm ipv4 trace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NAL-4-SUBSCRIBERS_DELETE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the parent interface configuration is modified or parent interface is deleted and subscribers are present on that interface.), (Recommended Action: This is warning to alert the user that sessions present on parent interface will be deleted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_REG_SHUTDOWN_NOTIFY
### Response:
(Severity: 4), (Category: ROUTING), (Description: A call to system manager to register for shutdown notification failed. This is a recoverable error in that shutdown actions are not critical.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-SERVICE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver was not able to connect to the service with the above error condition.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-INTR_ENABLE_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: Hardware state is not correct.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_MAIN-4-CLOCK_ALERT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: One of the internal/external clock interfaces have reported an alarm as specified in the alarm description. This does not necessarily mean any fault in the hardware. Some alarms can occur transiently during clock-events like configuration changes, network events or cabling changes. The alarms should cancel within few minutes in such cases. If the alarms persist then it may not affect routing/forwarding but timing distribution may be impacted.), (Recommended Action: Ensure cable connection between the configured interface port and external equipments is proper.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SB_SERDES_0_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data south bound serdes link 0 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-VNI_UNSUPPORTED_MODE_CHANGE
### Response:
(Severity: 4), (Category: L2), (Description: VNI updates from NVE module shall never transition directly from Layer 2 Control Plane to Layer 3 Control Plane directly, or vice-versa. It is expected that NVE will delete the Access Circuit VNI first and re-create it using the other mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_0_NPU_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-0 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT_NETFLOW-1-NOT_UP
### Response:
(Severity: 1), (Category: SERVICES), (Description: The afmon_ea process encountered the specified error while trying to update flow record when nfsvr was down.), (Recommended Action: Please check if nfsvr is up Please collect 'show tech-support performance-traffic' and contact Cisco technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to define the configuration register boot value in Cisco IOS XR?
### Response:
To define the configuration register boot value, which determines how the router functions during initialization, use the 'config-register' command in administration EXEC mode. RP/0/RSP0/CPU0:router#admin
RP/0/RSP0/CPU0:router(admin)#config-register 0x2
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-4-RING_LOOKUP
### Response:
(Severity: 4), (Category: OS), (Description: When RDS library tried to search for an identifier in the atomic tag ring, it returned failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPENET-3-RESET_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot reset the card as reset bit didn't clear.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-1-LOG_ALERT
### Response:
(Severity: 1), (Category: INFRA), (Description: please see show kim log for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-THREAD_CNT_SEVERE
### Response:
(Severity: 3), (Category: HA), (Description: When number of threads has crossed above SEVERE Threshold Percentage.), (Recommended Action: The number of Threads running has increased. Determine if there are any unnecessary threads available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESSION_MON-3-GEN_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: Generic error message used for internal debugging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_INFRA-3-inform_failed
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to inform config manager), (Recommended Action: Please contact tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-6-ERROR_LOG_SUCCESS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Sucessfully logged error into Asic Error library and PCDS library. Client ID and error key are shown.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-1-SPINE_UNAVAILABLE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Number of active spine cards is less than required. This could result in reduced fabric bandwidth.), (Recommended Action: Make sure all spine cards are seated properly and recommended number of spines are powered up. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal ltrace_init2 function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-3-ERR_EVM
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID BCDL consumer encountered the annunciated Event Manager Error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-6-LICENSE_CLEAR_POOL
### Response:
(Severity: 6), (Category: LICENSE), (Description: As a result of 'clear license' command execution, license pools other than the Owner pool were cleared.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-4-DISPLAYING_DEFAULT_HOSTNAME
### Response:
(Severity: 4), (Category: MGBL), (Description: Unable to bind to sysdb to get hostname hence displaying default hostname.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_DIP2_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control DIP2 parity error on NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-ISSU_MARKED_NODE_NC
### Response:
(Severity: 4), (Category: INSTALL), (Description: As part of ISSU operation, the specified node did not comply to ISSU infrastructure as it got reloaded. Thus it will be held in MBI until the current ISSU operation is completed and then will be will be booted with the new version of the software.), (Recommended Action: The node will be booted with the new version once the current ISSU operation is complete.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-GET_MY_NODEID_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: This failure can happen in show commands as well as in main CE-TFTP server process.The process will exit and respwan itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-UNSUPPORTED_CARD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unsupported card is found. Only Cisco approved card can be used), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Check the card in slot is a Cisco approved card. Replace the card if not. If the card is on the Cisco approved, please submit a ddts together with 'show filesystem <device>' information together with the product information on card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_5_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_BADFORMAT
### Response:
(Severity: 4), (Category: SYSDB), (Description: An unescaped ''' character was found part way through a token in a command string.), (Recommended Action: Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-3-ERR_REMOTE_TO_STATIC
### Response:
(Severity: 3), (Category: L2), (Description: Remote host cannot be assigned a MAC address which is configured as a static MAC address. Statically configured MAC address takes precedence. All traffic destined to MAC address will be forwarded using static MAC configuration.), (Recommended Action: Please assign different MAC address to remote host or change statically configured MAC address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-CHAN_CONNECT
### Response:
(Severity: 3), (Category: OS), (Description: Failed to connect with the message channel.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-DSDRSC_UNAVAILABLE_FOR_SW_DWNLD
### Response:
(Severity: 3), (Category: INSTALL), (Description: The node requires software that is only available on the dSDRSC. It cannot continue booting until the dSDRSC becomes available. If this node is supposed to become the dSDRSC then it is missing software that it requires to operate.), (Recommended Action: Wait for the dSDRSC to become available. If this node is supposed to become the dSDRSC then it is missing software that it requires to operate in which case the node should be moved into the Owner SDR and then recarved into a separate SDR.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA_TS_SVR-3-EVENT
### Response:
(Severity: 3), (Category: MGBL), (Description: An error occurred while processing an event at the time stamp server event manager), (Recommended Action: This is an unusual situation which should not occur under normal circumstances. If the situation persists it may require the restart of the time stamping process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the admin plane in IOS XR configuration?
### Response:
The admin plane in IOS XR is used to configure system-wide resources such as disk partitions, control Ethernet interfaces, and user access. It is not used to configure routing protocols or interfaces that carry user traffic.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-7-ERR_SEND_INGRESS_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Cannot send packet to qad queue, likely the qad queue is full and application does not drain the qad queue fast enough %s - error description %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %d - queue number %x - error code), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-MUTEX_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Mutual exclusive lock or unlock error happened to the queue.), (Recommended Action: Please collect output of the following commands: show platform show platform vm show log show process blocked location <> show process fib_mgr location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-3-ERR_STATIC_TO_LOCAL
### Response:
(Severity: 3), (Category: L2), (Description: Local host cannot be assigned a MAC address which is configured as a static MAC address. Statically configured MAC address takes precedence. All traffic destined to MAC address will be forwarded using static MAC configuration.), (Recommended Action: Please assign different MAC address to local host or change statically configured MAC address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-7-INVALID_CAPS_STATUS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-SHUTDOWN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: locald process failed to shutdown properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-PACKAGE_OUTPUT_SORT
### Response:
(Severity: 7), (Category: INSTALL), (Description: The sorting algorithm used for sorting packages that are to be output using a 'show install active' type command, failed to perform correctly. Although the packages will be output, they may not be in the standard order.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-PARSE_CLUSTER_PARITY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-TX_SECURE_CHANNEL_ESTABLISHED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-INTERNAL_NODEID_STR
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library was unable to convert the specified node ID into a node description string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-WARM_BOOT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: System could not sync with ASIC during warm boot. ASIC shall be reset and traffic forwarding would be impacted.), (Recommended Action: No further recovery is needed at this point. System shall auto-recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-BUNDLE_SPAN_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error indicates that monitor-session data update in HW for Bundle or its member failed.), (Recommended Action: Please verify the Bundle and monitor-session configuration. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-STATS_DB_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered with the PTP statistics database, packet counters may be invalid.), (Recommended Action: No action is required. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFI_EA-3-STATE
### Response:
(Severity: 3), (Category: L2), (Description: The SFI EA process failed to update the state of a SFI interface.), (Recommended Action: Collect debugging information, shut/no-shut tunnel interface. If the above action doesn't fix the problem, remove tunnel interface, re-create tunnel interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-UPGRADE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message related to the Canbus Controller upgrade process on the specified location.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_RC_HEX
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, hex_code of rc.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-2-ERR_RC
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSP_A_PKT_CRC_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TSP decoder A CRC error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-6-INFO_REKEY
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd rekey information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-BADVERS
### Response:
(Severity: 4), (Category: ROUTING), (Description: The system received an OSPFv3 packet with an OSPF version field other than 3. This indicates an error in the sender of the packet.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE-3-ERR_LL_DLL_CHAN_CONNECT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to connect to LACP lite process channel fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-SLR_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while processing a received SLM message, resulting in a failure to send a SLR reply. - the error string gives more details. This is a problem because the SLR is needed in order for the sender to correctly calculate packet loss measurements. This error is not caused by malformed or invalid packets. The SLM test session will now be invalid.), (Recommended Action: If the error reason given at the end of the message indicates that too many SLMs have been received, then no more new SLM sessions can be supported. The number of SLM session is platform dependent and is the minimum of the <cmdArg>Maximum SLA operations<noCmdArg> and <cmdArg<Maximum MEPs<noCmdArg> entry shown in <cmdBold>show ethernet cfm platform-capabilities<noCmdBold>. If the command is not present, contact TAC for confirmation of the details. This message will be seen if more than that number of operations are being attempted (for the specified linecard). This message may also be seen if there are inactive SLM sessions still stored in the database, taking the total entries above the limit. Any inactive session entries will be cleared by the database within 5 minutes. To resolve the issue urgently, the database may also be cleared by restarting the cfmd process on the node where the error is occurring. This action will result in all existing test sessions reporting a small number of lost packets. Otherwise, the error reason will either indicate memory exaustion on the LC, or some other unexpected condition. If this error occurred as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. As we have failed to respond to an SLM, it may be useful to restart the test from the source device once the issue is resolved.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-0-CPU_ERR0
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Indicates Hardware correctable error (no operating system or firmware action necessary). This error message is thrown after observing hardware correctable error.), (Recommended Action: Reload the LC that has the problem. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Crossbar driver encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPUXBAR bridge has a minor error.), (Recommended Action: Minor error, no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPv4-4-TRANS_WARNING
### Response:
(Severity: 4), (Category: IP), (Description: There was a critical system call failure. System may not have handled certain transitions properly.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the three configuration planes in IOS XR?
### Response:
The three configuration planes in IOS XR are: admin plane, shared plane, and local plane.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMPOOL_EDM-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Memory running low), (Recommended Action: This indicates low-memory condition. 'Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.' 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-5-HA_NOTICE
### Response:
(Severity: 5), (Category: ROUTING), (Description: Used for logging of HA events like process startup, entry and exit of NSF/GR or NSR procedures and related events.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-CHKPT_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to perform checkpoint service functions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred while starting up of ANCP process. The exact reason for the error is as specified in the message. The condition could most probably happen because of the following: 1) Unavailabilty of a particular resource at the time of intilization 2) Race condition 3) Memory initilization error/ shortage), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and if ANCP process is able to initialize and come up successfully after restart, then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_drop-3-UNDIVERT
### Response:
(Severity: 3), (Category: SERVICES), (Description: A packet could not be sent out to its original destination after firewalling. The packet was dropped.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_AGORA_ALM_TYPE_FOUR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: AGORA type four alarm.), (Recommended Action: If the problem persists, call your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_EVENT_CONN_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for disconnection or connection error event. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-4-ERR_ADJ_DLL_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-3-COULDNOT_REGISTER_NOTIFY_SHELFMGR
### Response:
(Severity: 3), (Category: INSTALL), (Description: Retry registration fixed number of times. Notifies shelfmanager when it unable to register.), (Recommended Action: Please contact TAC after trying maximum retries.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK_CAPTURE-4-ECC_ERROR
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: A packet was dropped in hardware due to bad programming or a hardware error. This is a raw dump of the packet to aid in debugging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-TDB_REGISTER_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A static routing process failed to register a table with RIB. This may lead to routes associcated with a the failed to be added in the routing table.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route static').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encounterd some error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_DELETE_SGSERVER
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-5-BELOW_THRESHOLD_VALUE
### Response:
(Severity: 5), (Category: L2), (Description: Number of groups have gone below the group threshold mark. Safe to add more groups.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-AUTH_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The license authorization is expired.), (Recommended Action: The customer should check the connection to the backend Smart Licensing server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ED_SCH_INTR_MC_BUFFER_HANG_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ED_SCH_INTR_MC_BUFFER_HANG interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-6-RACK_UP_NOTIFY
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Printing the node and rack details during RACK-UP event), (Recommended Action: This is an informational message. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUMI-7-SB_MBOOT_FAILURE
### Response:
(Severity: 7), (Category: INFRA), (Description: Additional debug info for Secure Boot validation failure.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_12_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_3_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-3-NO_MEMORY_AVAILABLE
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered while the memory was being allocated.), (Recommended Action: The process is automatically restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-UNEXPECTED_SEND_ERROR
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB client library has failed to send a LWM message to the server, due to receiving an unexpected non-connection-related error in sending the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTF_ERROR-3-MQ_OPENFAIL
### Response:
(Severity: 3), (Category: TEST), (Description: Unable to open the message queue.), (Recommended Action: Restart the ctfmgr process using the CTF CLI commands, ctf kill manager, ctf expunge manager and ctf start manager.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-CDMA_RAM_UNCORRECTABLE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates an uncorrectable multi-bit error occurred on this internal SRAM. %s - name of ram that error occurred %x - key of error node recorded %s - error data), (Recommended Action: if this happen continous, reload the board. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_DAMPENING_OFF
### Response:
(Severity: 6), (Category: L2), (Description: Session has moved out of dampening state either because of clear dampening or backoff timeout.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_PDU_VERSION
### Response:
(Severity: 4), (Category: ROUTING), (Description: The PDU version reported in the IS-IS header is invalid (VERSION, should be EXPECTED) from SNPA (INTERFACE-NAME) This system received a protocol packet bearing an invalid VERSION in the header. The router originating the packet is either placing the wrong protocol version number in the packet, or else it is running an incompatible version of the IS-IS protocol.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-FSVFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: An automatic register for one of the FSVs failed.), (Recommended Action: If any of these messages occur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-CAT_ERROR_HANDLING_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process failed to handle ZENGL FPGA catastrophic/fatal event due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-1-_OOR_RED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is a severe error message in the OFA module to indicate high usage of OFA resources.), (Recommended Action: Please collect the OFA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SRV6_LOC_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The RIB returned an unexpected error when IS-IS attempted to (de)register for updates to the SRv6 locators. The problem may be caused by a low memory condition but is most likely to be an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS and/or the RIB processes. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-NETIO_SET_MAPPING
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS failed to setup mapping with this particular media or base capsulation. As a result CLNS will not be able to receive CLNS packets on this caps on any interface on this node.), (Recommended Action: Please contact cisco-support with the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-7-ISM_PD_LIB_CE_CONN_INFO
### Response:
(Severity: 7), (Category: INSTALL), (Description: Shows the invalid CE connections node informations), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-COMM_FAILED
### Response:
(Severity: 3), (Category: LICENSE), (Description: The device communication with the Cisco licensing service failed.), (Recommended Action: Please check the Smart Call Home settings and network connectivity to cisco.com.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred during initialization. These errors include timers, L2FIB or packet i/o.), (Recommended Action: Please check if the igmp snooping profile has been attached to the bridge domain by using the following commands. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping profile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping profile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping bridge-domain detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping bridge-domain detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping port detail debug<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping port detail debug<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-6-CLEANUP_NODE_PRESENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Prints the status of the flag value of the respective rack nodes during rack down event.), (Recommended Action: This is an informational message. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The operation is failed due to an internal software error.), (Recommended Action: Check if the linecard reported any other errors. May need to restart process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-CLIENT_SHUTDOWN_START
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A request received from an IOS XR process to shut down the Network Processor), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP_LIB-3-SW_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Process encountered an error during software initialization. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error is normally associated with larger system issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-STBY_ACTIVE_NOT_READY
### Response:
(Severity: 4), (Category: HA), (Description: RMF attempted to go active without the card ready - reset card), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-HEADLESS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: No active RP condition.), (Recommended Action: None, the LC will reload automatically if the condition persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-CLEAN_ALL
### Response:
(Severity: 5), (Category: ROUTING), (Description: Information regarding all resource cleanup), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TARGET_CFG_CREATE
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen client failed to create target config buffer. Configuration can not proceed.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-CONTEXT_CREATE
### Response:
(Severity: 7), (Category: HA), (Description: During registration for memory notification, an internal error prevented the creation of an internal context structure. The calling function and detected error are displayed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTIO-4-WRITE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The VTIO SPP plug-in failed when attempting to communicate between threads.), (Recommended Action: If any problems are seen, they may be rectified by restarting the spp process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-NOTIFD_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Notification Daemon server (notifd) failed to start correctly), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-ERR_ATTACH_FSV
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 NetIO component was unable to attach the required FSV before passing the packet to the IPv6 partner process. The Packet was dropped.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LM-3-LINKMON_ERROR
### Response:
(Severity: 3), (Category: LIBRARY), (Description: PCI connections Errors.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-INVALID_REQUEST
### Response:
(Severity: 3), (Category: OS), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-6-ENFORCE_INC
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled with appropriate licenses.), (Recommended Action: 'DEBUG')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-INCONSISTENT_VERSIONS
### Response:
(Severity: 7), (Category: HA), (Description: An invalid combination of version numbers was encountered during table registration or table versioning. This is most likely due to a coding error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-SETUP_HANDLERS
### Response:
(Severity: 3), (Category: IP), (Description: The IPV6 MA process failed to initialize various callback handlers for various synchronous and asynchronous events.), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-CONFIG_SCRIPT_TIMEOUT
### Response:
(Severity: 4), (Category: MGBL), (Description: The config script exceeded the maximum allowed execution time and so must be terminated to ensure that no negative impact on the system is incurred through its usage. In order to recover, CCV must restart.), (Recommended Action: The problem may be caused by an error within the script itself. Attempt to address any problems within the script before proceeding. If further problems are seen, the cause of the timeout should be investigated, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-UIDB_THRESHOLD_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The UIDB entry utilization for a specific LC has exceeded the default warning threshold (90 %)), (Recommended Action: Limit UIDB usage accordingly. This is a direct result of interface/sub-interface creation, either statically configured by user input or dynamically created by protocol action. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PQMON-6-QUEUE_HIGH_THRESH
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The amount of work queued into a software queue has crossed the high threshold (three-fourths of the queue size). This typically means that the owning process is blocked or CPU is under heavy stress and, hence, the owner process is unable to process the queued work items.), (Recommended Action: These messages are for the purpose of proactively alerting the operator to any potential issues that may arise from queue build-up on the software queues. If no impact (such as routing protocol flaps or traffic loss) is seen, these messages can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-3-FIELD_ENTRY_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OFA failed to create entry for the Group on this NPU.), (Recommended Action: The failure caould be because we ran out of available free entries for this Group on this NPU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-BADMSG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP_LIB-7-EXIT_MESSAGES
### Response:
(Severity: 7), (Category: IP), (Description: NTP process exits and restarts when it detects a failure. If the error does not persist it can be ignored.), (Recommended Action: None required if NTP process restarts and recovers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INSTALL_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: The installation of the virtual service failed.), (Recommended Action: Enable the Virt-manager trace logs and repeat the installation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ASIC_RESET_REASONS
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message is seen when fabric ASIC require to be reset during a driver restart. \ The output contains the a bit mask depiction of all ASICs on the fabric board. \ 'Ready' and 'Reset' masks identifies the ASICs that are in ready or reset state. \ 'Halt', 'Not ready' and 'Init fail' provide additional information if the 'Reset' mask \ is non-zero.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT-4-STATS_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred when attempting to retrieve results from the hardware.), (Recommended Action: If this error occurs only once, it may be safely ignored. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-7-ERR_SYSDB_EDM_REG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Cpuctrl Sysdb Register EDM error), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-LOCKING
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library has either failed to aquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-ERR_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in CPUCtrl driver due to memory allocation), (Recommended Action: Restart the process using the CLI in the exec mode -process restart rodimus If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-NODE_KDUMP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node's kernel is dumped to local harddisk or RP's harddisk.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-AUTHENTICATION_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: The IKE process was unable to authenticate its security association with its remote peer.), (Recommended Action: 'Contact the remote peer's administrator.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-MSG_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The message received by the server had inconsistent values.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-SESSION_STARTUP_OK
### Response:
(Severity: 7), (Category: MGBL), (Description: Debug message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-MSG_VER_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: A msg from an application has different version format with current software.), (Recommended Action: The OBFL file should be saved to other place for later debugging, and then it should be removed to recover current situation. Please clear the OBFL files, as it might be because of corrupted records. CLI : admin clear logging onboard corrupted-files location <LOC> If the issue is seen after clearing the files, please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-6-INFO_AUTH_SUCCESS
### Response:
(Severity: 6), (Category: L2), (Description: PPPoE session is granted authentication success for a subscriber.), (Recommended Action: This is an informational message. It is not required any action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-GET_CTX_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT driver got a packet but couldn't map a port to an idb context), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-BAD_UPDATE_MESSAGE
### Response:
(Severity: 3), (Category: OS), (Description: The indicated error occured while processing an update from another node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_LSP_INPUT_Q_OVERFLOW
### Response:
(Severity: 4), (Category: ROUTING), (Description: An incoming LSP or SNP pdu was dropped because the input queue was full), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS_MIB-3-ERR_ALLOC
### Response:
(Severity: 3), (Category: OS), (Description: An allocation has failed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_HW_MODULE_DPA_TCAM_INCONSISTENCY
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined TCAM key parameters, there will be inconsistency between the config in DPA and the hardware since the lc has already started the initalization process before this config gets to it. Needs attention with RSP reload.), (Recommended Action: System is inconsistent. Need to reload the RSP for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-ACP_VRF_INTERFACE_CREATE_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'Autonomic network VRF has not been ' 'created on the interface'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-PACKET_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SATORI-3-PCIE_ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: pcie attach has failed and process will respawn), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still non-operational, execute 'process restart procmgr location <>'. If it the process still fails to spawn, contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-ERR_SOCKET_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Process encountered an internal software error. Process was failed to initialize socket. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error is normally associated with larger system issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-PEC_RELOAD_IGNORED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An expansion card was attempted to be reloaded, but it is currently shutdown. So, the reload instruction was ignored. To enable a reload the expansion card needs to be brought up first (no shutdown) and then it needs reloading.), (Recommended Action: Bring up the PEC : 'no hw-module subslot 0/0/1 shutdown' Reload the PEC : 'hw-module subslot 0/0/1 reload')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-XFP_RETRY_EEPROM_RD
### Response:
(Severity: 6), (Category: L2), (Description: The Reading of XFP EEPROM failed; Retry is attempted), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-INVENTORY_CHANGE_FAILURE
### Response:
(Severity: 4), (Category: MGBL), (Description: A failure was encountered while trying to update the Central Config Validator (CCV) with information about the current inventory available in the system. Validation of configuration will still occur, but in situations where this depends on the system inventory the validation result may be incorrect.), (Recommended Action: The cause of the inventory change failure should be investigated, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDP-3-INIT_RETRY
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the UDP process attempts to retry one of its initialization tasks with a network layer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMED_EVM_CREATE
### Response:
(Severity: 7), (Category: HA), (Description: The event detector has failed to create an Event Manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-4-EXT_USB_FAULT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The PRP detects a over-current condition on external USB port and it is disabled the port.), (Recommended Action: Remove and replace the external USB device Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_OVF_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 channel FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-ENCAP_CONFLICT
### Response:
(Severity: 4), (Category: L2), (Description: There is a conflict between the interface encapsulation and rewrite configuration and the CFM configuration. AIS or CCM packets cannot be sent from the interface or MEP mentioned in the message, for one of the following reasons: - CoS bits are configured, but there are no VLAN tags in which to carry them in the packet. - An attempt is being made to send packets inwards, but the interface is not configured in L2 mode. - The service is configured with a number of tags to use when sending packets, but either the packets are being sent outwards, or the encapsulation has fewer tags than the number specified.), (Recommended Action: Modify either the interface encapsulation a rewrite configuration, or the CFM configuration, so as to remove the conflict. For example, remove any MEP CoS configuration, or remove any service 'tags' configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-PTHREAD_MUTEX_UNLOCK_FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6_CLIENT-3-UNREGISTER_NOT_ALLOWED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Type6 masterkey update is inprgress. Client has attempted an unregister now. This is not allowed from type6 as it can lead to inconsistencies.), (Recommended Action: If type6 is stuck in inprogress because client is not responding, use 'clear type6 client <client-name>' to recover. Note: this may lead to stale configurations in the client.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-6-PHASE2_RETRY
### Response:
(Severity: 6), (Category: MGBL), (Description: The TTY Server found error in part of phase 2 initialization. Server is set not-to-restart, so retry. in particular if the aux port is running ksh then this should still be running unimpacted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FC-6-FW_OPERATION_INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: Information about the firmware client operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-3-NO_MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: Not enough memory available in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_INFRA_MGR-3-BIND_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The message indicates the failure in binding the data.), (Recommended Action: Please provide the following logs: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - Show logging - show services secontroller trace reverse location <ISM>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISM_PD_LIB_ERROR
### Response:
(Severity: 3), (Category: INSTALL), (Description: Ism_pd_lib_error occurs while getting nodeid information, plane information and while reloading node. Please contact TAC for further details.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_HALT_VIA_FPGA
### Response:
(Severity: 1), (Category: FABRIC), (Description: The specified device could not be halted using the FPGA register. Use the fabric ASICs internal register to halt the device. This message is meant to catch specific hardware failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-INFO_ISPF_DEPRECATED
### Response:
(Severity: 6), (Category: ROUTING), (Description: Incremental SPF (ISPF) is deprecated. No action will be performed.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPG-7-STANDARD_DECODE_BAG_USED
### Response:
(Severity: 7), (Category: MGBL), (Description: An internal data structure failed to be decoded in a fast manner and the slower, more complete decoding, has been used instead.), (Recommended Action: No action is required. This is an internal message used to track and improve efficiency of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-STANDBY_NOT_READY_REASON
### Response:
(Severity: 4), (Category: HA), (Description: The named process has set the standby in a not ready state with the supplied reason.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_OOM
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal error encountered in RIP's OOM module. This may affect RIP's behavior only under low memory conditions; otherwise RIP will operate normally.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-6-MBIVSN_STR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MBI Mgr general info, where both parts of the specifiable info are strings.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
B_SHIM_PARTNER-3-SVR_UBIND_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is a software error when trying to unbind to IM.'), (Recommended Action: Check if IM is working fine or not by executing CLI 'sh process ifmgr location <>'. Try performing IM process restart by executing CLI 'process restart ifmgr location <>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-7-DEBUG
### Response:
(Severity: 7), (Category: MGBL), (Description: General debugging information for development and general diagnosis.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_ATTR_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_create failed while creating an object in a chkpt table.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_INTF_DISABLED
### Response:
(Severity: 4), (Category: OS), (Description: The punt flow trap sampler detected an excessive flow on an interface. This could result in a denial of service to other interfaces. Penalty-policing has been disabled by configuration so the interface will not be placed in the 'penalty box.'), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-MALLOC_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: System could not successfully provide the request memory block.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-EMWEB
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent was unable to carry out an EmWeb server function. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of Secure Shell (SSH) and how is it configured in Cisco IOS XR?
### Response:
Secure Shell (SSH) is used to provide secure and encrypted remote access to the router for management purposes. SSH is configured by generating a key pair, specifying the SSH version, setting the timeout and maximum authentication tries, and configuring VTY lines to use SSH as the transport protocol.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-SHMOO_FILE_DELETE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Removing the memory tuning file. Memory tuning will be automatically done on boot.), (Recommended Action: Collect the above mentioned logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RASF-2-NO_RETRIEVER
### Response:
(Severity: 2), (Category: ROUTING), (Description: This is a logic error in the construction of one of the ORA entities. The function to actually perform the retriever operation was not defined.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-PER_PREFIX_GLACIAL
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route accounting for a route), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP TTL security feature?
### Response:
The BGP TTL security feature provides a lightweight security mechanism for protecting eBGP peerings. It uses the TTL field to verify that the peer is within a specified number of hops. Packets that exceed the hop count are discarded. It is configured with the neighbor ttl-security command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-DEBUGFAIL
### Response:
(Severity: 4), (Category: SNMP), (Description: Failed to initialize support for the command 'debug snmp mib xxx', where 'xxx' is the MIB indicated in the error message. This could be due to a low memory condition or an internal software error. The result is that this command cannot be used.), (Recommended Action: Restart snmpd process.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-3-BARRIER_OVERFLOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Overflow occurred on buffer used to store client's write to hardware. This could cause losing some configure data after a hard reset. The lost data may be identified by checking what client process was writing to hardware during the reset), (Recommended Action: Check system sanity related the to card, since it possibly cause protocol/traffic packets drops.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-KERN_OBFL_MSG1
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when an OBFL flash is not accessable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_LONG_PKT_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress long packet detected on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-3-DEST_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform does not support this destination.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REPLACE_COMMIT_TRIGGER_FAILURE
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install commit as part of the replace operation couldnt be triggered.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-NO_PLIM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message informs the user that the linecard will be powered down because there is no PLIM inserted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-MAP_RESOLVER_REACHABILITY_CHANGE
### Response:
(Severity: 5), (Category: IP), (Description: 'No route to reach map-resolver hence map-cache will not ' 'get resolved.'), (Recommended Action: 'Ensure ITR has connectivity to map-resolver.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
B_SHIM_PARTNER-3-SVR_BIND_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is a software error when trying to bind to IM.'), (Recommended Action: Check if IM is working fine or not by executing CLI 'sh process ifmgr location <>'. Try performing IM process restart by executing CLI 'process restart ifmgr location <>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWCMD-3-STD_MSG
### Response:
(Severity: 3), (Category: SNMP), (Description: 'The failure pertains to show commands in snmp, when sending reciving the data' 'This does not indicate feature failures or issues'), (Recommended Action: 'This log does not indicate a system impact.' 'all show snmp CLI's for debugging purpose only' 'Recommend customer to re-try the command.' 'If there is no output, reconfigure the snmp settings and re-try')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-4-LSD_REPLY_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: The Linux Socket Database received a message from a client process, but was unable to send a response. The client process may remain blocked waiting for a response.), (Recommended Action: The scope of problems caused by this depend on the importance of the client process. As a first action, try restarting the client. If this is seen repeatedly, try restarting xlncd, but note that Linux datapath operation may be affected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-BARRIER_FLOW_STARTED
### Response:
(Severity: 6), (Category: FABRIC), (Description: Barriers started flowing on all the nodes/types.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HM-3-FPING_MISMATCH
### Response:
(Severity: 3), (Category: HA), (Description: HA Health Monitor Fabric ping failed. When a received ping response does not match the transmitted ping, this indicates some kind of cell corruption or cell loss in the fabric or edges of the fabric.), (Recommended Action: If problem persist, it indicates the bad hw in the system. Please contact TAC for fault isolation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How are VRFs configured for L3VPNs in Cisco IOS XR?
### Response:
VRFs are configured using the 'vrf' command in global configuration mode. Various VRF attributes such as route distinguisher, import and export route targets are configured under the VRF configuration mode. Interfaces are associated with a VRF using the 'vrf' command under the interface configuration mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-4-CPLD_POWER_SEQUENCER_FAULT_OR_ALERT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The fabric power sequencer detected a temperature or power alarm.), (Recommended Action: An alarm was detected. If a critical alarm is detected node will be shutdown. Please collect logs mentioned in required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the Local Packet Transport Service (LPTS) and what is its purpose?
### Response:
The Local Packet Transport Service (LPTS) is a feature that helps protect the control plane and management plane from denial-of-service (DoS) attacks. It uses a combination of an access control list, a rate limiter, and flow classification to police local traffic destined to the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-DLINK
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-6-NCS1K_PROV_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates success of slice provisioning), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-PAR_SERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Single bit mem parity error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_PLATFORM-7-ERR_GEN
### Response:
(Severity: 7), (Category: ROUTING), (Description: MFWD-PLATFORM library encountered error during setup. The init setup will be retried for finite number of retries.), (Recommended Action: *RECUR)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_LIB_PLMGR_SUPP-3-LTRACEOPEN
### Response:
(Severity: 3), (Category: QOS), (Description: Qos lib ltraces will not work as the ltrace initialization failed. The failure may be due to one of the following reasions. 1. Due to invalid magic number in existing buffer 2. Due to invalid length field in existing buffer 3. Due to failure in allocating memory 4. Due to unexpected system error), (Recommended Action: Collect the console logs along with the information specified under the component required_info and call your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-UNMAP_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Unmapping shared memory tables of AIB Failed.' 'This will not effect the process.' 'This operation is optional'), (Recommended Action: 'ISSU manager will use some other API' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLCDLL-3-ERR_PKT_ENCAP
### Response:
(Severity: 3), (Category: L2), (Description: The encapsulation of an HDLC packet failed for the network protocol with the ethernet type code specified. The packet has been dropped.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-7-FUNC_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-IM_CONN
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error occurred when FIB tried to communicate with IM.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_FWD-2-NO_MEM
### Response:
(Severity: 2), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED_LIB-7-MSG_CONNECT
### Response:
(Severity: 7), (Category: OS), (Description: An attempt to connect to the lead placed server failed with the specified reason. It may be the case that placed server had been restarted.), (Recommended Action: Collect the function name and traceback information. show commands: Issue 'show proc placed' to check if placed has restarted. Collect show tech placed, show tech sysmgr and forward to your next level of technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_WRAP
### Response:
(Severity: 5), (Category: ROUTING), (Description: All the LSP Wrap enabled Flex LSPs using the specified interface \ as outgoing interface has changed their LSP-WRAP status.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-2-DATA_QUEUE_FULL_PROCESS_RESTART
### Response:
(Severity: 2), (Category: ROUTING), (Description: The IGP-TE inter-process message queue has remained full for an extended period of time. The IGP process has been restarted to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROLLER_ODU-3-DLL_OPEN_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred opening a dependent DLL and loading its symbols. The process is unable to run.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-KDUMP_MNT_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: To start the kernel core dump operation, the filesystem used to store the core file has to be mounted first. This mounting operaiton is failing and it is preventing the creation of the host kernel core file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-MSGRPLY_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFM encountered message reply error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SRVR_ENGINE-3-ERR_2_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: SKS server exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-RULES_DUPLICATE_ID
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Multiple rules with the same static id were found in rules files. Every rule should have exactly one static id assigned to it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TARGET_CFG_LOCKERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen client failed to obtain exclusive lock for this session. Terminate the other open sessions and try again.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_CORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE correctable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_RACK_CLUSTER_UNSUPPORTED
### Response:
(Severity: 3), (Category: OS), (Description: more then 2 Rack cluster not supported.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MANSDORF-6-GENERIC_EVENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A generic event logs in MANSDORF layer.), (Recommended Action: No action is required. This is info message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET0_INTR_HDR_CSUM_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET0_INTR_HDR_CSUM_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-OOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Network Processor Provisioning experienced an Out-of-resource condition that could not be reported back to provisioning agent for recovery/back-off Loss of configuration and data could occur.), (Recommended Action: Loss of configuration and data could occur. Revisit recent provisioning or route-update events to see if router resources have been exceeded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_IM_REG_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register for notification of the specified changes on the specified interface and protocol. This may happen in case of ifmgr not ready to process the request. For example ifmgr restart. This may be an internal programming error, but is most likely to be a resource starvation problem.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider disabling and reenabling the interface within IS-IS configuration, or restarting the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-EDM_ENCODE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCCLIB-3-ERR_HW_BIST
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BIST failure,update the state at block level.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
deflate-3-output_error
### Response:
(Severity: 3), (Category: OS), (Description: The multiple file compression output cannot be directed to stdout), (Recommended Action: Please check command syntax for error if the error is from a user CLI Please capture show log and error messages if the error is not due to user entered CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-SYSMGR
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an error while communicating with SysMgr. The error message describes what operation has failed and why it failed. This is a fatal error and the ELMI process will abort and be restarted to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between installing a package using the install add command versus the install activate command?
### Response:
The 'install add' command copies the package to the router's storage but does not make it active. The 'install activate' command is used to make the package active on the router. Packages can be added and activated in a single step using 'install add' followed by 'install activate' in a single command line.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_TUPLE_UNPACK
### Response:
(Severity: 7), (Category: OS), (Description: Failed to unpack tuple details), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The initialization of a needed resource failed at process startup, therefore exiting the process. The system will attempt automatic error recovery by restarting the mbi-hello process several times. If the error does not correct itself, this card will then be rebooted.), (Recommended Action: Please collect the following information and contact your Cisco technical support representative. 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> Note: The above command may not work if the mbi-hello process keeps restarting. However, it can provide valuable information if it can be collected. 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR6
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-3-TRACE_INIT_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Type6 server could not initialize the event tracing module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-UNEXPECTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_MEM_SELFTEST_FAIL_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory self test failure on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. Please verify the bridge FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-DRVR_SERVICE_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: SFE driver could not initialize due to above error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-THERM_OVERT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver detected a thermal over temperature), (Recommended Action: Ensure the fans are working & the board is not overheated. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-FILEOPEN
### Response:
(Severity: 4), (Category: MGBL), (Description: The file specified for reading instructions from, or writing output to, when MDACon was started, cannot be found. The most probable reason is that an incorrect incorrect name or path was supplied.), (Recommended Action: Check that the file name sor path upplied was correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_RX_ALIGN_LOSS_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Rx alignment loss on XAUI to NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between a stub area and a totally stubby area in OSPF?
### Response:
A stub area does not accept external routes (Type 5 LSAs) but does allow summary routes (Type 3 and 4 LSAs) from other areas. A totally stubby area does not allow external routes or summary routes from other areas. The only way for traffic to get routed outside the area is a default route generated by the ABR. This further reduces the size of the routing and topology tables within the area.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_TEST_ONLY
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA hit some code that it shouldn't be possible to hit except during testing. This must be related to a programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-NOTIFOID_FAILED
### Response:
(Severity: 3), (Category: SNMP), (Description: Every trapstring supported by the 'snmp host' command corresponds to one or more notification OIDs. Each of these notifications will have zero or more varbinds that are carried as payload - each MIB tells snmpd about these varbinds so that a 'notification view' can be built for them. An extra varbind - sysObjectID - is required to be sent with all v2c notifications. This message indicates that an attempt to register this varbind failed. Sending v2c notifications for the trapstring specified in the error message may fail. You can workaround this by not specifying any trapstring in the 'snmp host' configuration - this will enable all notifications for that destination.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_CONN_SETRETRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error while setting event connection setretry. This will cause ipv4_mfwd_partner and ipv6_mfwd_partner processes to exit. When process exists, sysmgr will automatically respawn the process for some number of times. If it still fails, process remains in the exit state. This will impact multicast forwading.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-MODIFY_AP_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as we were looking up data for the above attach point. The operation in question did not succeed, and thus the policy_repository could be in an inconsistent state.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-BUS_ADRALN
### Response:
(Severity: 4), (Category: OS), (Description: Bus error generated due to invalid address alignment. Program is trying to read or write data that does not fit the CPU's memory alignment rules.), (Recommended Action: No action required.Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_DIR-3-CHKPT_READ_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The ISSU infrastructure has identified that a sysadmin ISSU operation has failed. The system must be reloaded in order to recover to the committed version.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_2_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROLLER_ODU-3-CTRLR_INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during initialization with a necessary service for a particular interface type. The process is unable to run.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_MPLS_EA-3-ERR_INFO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMORB_XMLAGENT-3-CRYPTO_DEACT
### Response:
(Severity: 3), (Category: MGBL), (Description: The crypto pie is deactived or removed while xmlagent is running in ssl mode.), (Recommended Action: Unconfigure xmlagent or configure it to run in non-ssl)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_QS_RUN_DONE
### Response:
(Severity: 1), (Category: INSTALL), (Description: The Quickstart Run operation has completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set RSVP explicit path for TE tunnel?
### Response:
To set an RSVP explicit path for a TE tunnel, use the 'explicit-path name' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#explicit-path name Path1
RP/0/RSP0/CPU0:router(config-expl-path)#next-address 10.1.1.2
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_THREAD_MUTEX_UNLOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error during unlocking of a RIP resource.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-NO_ACT_FAB_ALERT
### Response:
(Severity: 1), (Category: FABRIC), (Description: No active fabric signal detected on FIA instance.), (Recommended Action: Please reload the board in the next maintenance window. If this fault happens on a single FIA/slice, and '(admin-config)#fault-manager datapath port shutdown' is configured, the interfaces for this slice would be shutdown. If the fault could not be cleared after card OIR, please RMA the card. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_REGISTER_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_CHAR_ALIGN_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 char alignment error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_PROGRAM_ERRORED_POLICER
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to program the flow policer.), (Recommended Action: When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_linux-7-OPEN_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Open of file failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-REG_EXPIRED_CLOCK_CHANGE
### Response:
(Severity: 3), (Category: LICENSE), (Description: The system clock has been changed so that it is now outside the valid registration period. If the clock is reset to a value inside the registration validity period within one hour smart licensing will continue function normally. If the clock is not reset the device will become un-registered and a new id token will need to be obtained to re-register the device. The registration validity period is defined by the start and end date in the id certificate. use 'show tech license' to get the id certificate information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-ERR_MEDIA_WRAP
### Response:
(Severity: 3), (Category: L2), (Description: The specified side of the interface has wrapped or unwrapped for the given reason. There is/was a fault (or user request) on the ring causing potential loss of traffic/bandwidth.), (Recommended Action: Clear the cause of the fault/wrap. Use the 'show srp ips' and 'show srp failures' CLI to determine the root cause of the fault (if still present).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_INFRA_MAP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in stats infra component. The error occurs if the pointer to the root page for the stats infrastructure is not received .), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-CANNOT_GET_PROCNAME
### Response:
(Severity: 7), (Category: INSTALL), (Description: A process' name cannot be determined, so the current request or operation will not be able to proceed successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAP_LISTEN-3-EVENT_CONN_MGR_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: This indicates that the SAP listener packet handling process failed to open connection to Connection Manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes sap_listen error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes sap_listen error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Using the Job ID from the above command, please run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sap trace detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sap trace detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-7-DEBUG_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-MISSDESTNAME
### Response:
(Severity: 4), (Category: MGBL), (Description: The command entered requires a destination object name or path and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8508-3-WARN_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: The driver process will re-start and complete initialization of the switch device. However, if this message is seen for more than 5 times than please reload the card using -hw-module location <> reload and check if the message still occurs in subsequent reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LIC_MGR-3-EULA_ACCEPTED
### Response:
(Severity: 3), (Category: OS), (Description: The end user has accepted an end user license agreement.), (Recommended Action: This message is informational.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the default behavior of the running configuration in IOS XR?
### Response:
By default, the running configuration in IOS XR is not saved automatically. Changes made to the running configuration are lost on a reload unless explicitly saved to a file using the 'save configuration' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-4-CHKPT_RESTORE_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Encountered a checkpoint recovery failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BLWM-4-PULSED_FLUSH_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: A BLWM-enabled client failed to flush the batched LWM requests. This is most likely because the server process restarted. Wait for client to reestablish connection with server and flush the batched requests again.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ABORT_INCOMPLETE_INSTALL
### Response:
(Severity: 3), (Category: INSTALL), (Description: A previously requested install operation that was incomplete was attempted to be applied. However the operation was detected as being before any state had changed so was aborted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-SUB_IF
### Response:
(Severity: 3), (Category: L2), (Description: Unexpected error on the sub-interface), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-CHDIR_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Chdir failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is inserted properly to the slot if it is an externally accessible device. Submit ddts if the card is internal device or inserted properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-INFO_SHM
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered a change in the shared memory region parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-DEVICE_ACCESS_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter device access), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-6-TEST_CLIENT_FEED_EVENT
### Response:
(Severity: 6), (Category: OS), (Description: Status information while asking all registered clients to f try to put messages with PRIxPTR or PRIdPTR, it's throwing errorseed the event.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-SYSCALL
### Response:
(Severity: 7), (Category: HA), (Description: A system call failed. The calling function, the failed call, and error are displayed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_READ
### Response:
(Severity: 7), (Category: INSTALL), (Description: PIE file appears to be damaged. Package read failed due to network connectivity issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-2-LEAD_CONFLICT
### Response:
(Severity: 2), (Category: TOPOLOGY), (Description: System Admin Manager has detected a Lead Conflict.), (Recommended Action: No action is required. The System will recover itself from this state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_OC_PKT_TOO_SHORT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EBS from FIA packet too short error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-FINDDATA
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered in debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-PLIM_NOT_PRESENT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PLIM is not detected by lc fpga.), (Recommended Action: Check IF plim exists in the slot. If it does then reseat the plim properly and make sure it is properly inserted)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-1-DISK_ALERT
### Response:
(Severity: 1), (Category: HA), (Description: When some monitored disk's usage is above 99%.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-5-NOTICE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This is a notice about a normal but significant event.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-FAIL_EDM_OPEN
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Inventory Manager is not able to open a EDM connection channel with the event manager to read/write the inventory details from the SYSDB database.), (Recommended Action: No action needed. It should auto recover)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT_FIFO_OFLOW_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt fifo overflow on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-7-MP_CORE
### Response:
(Severity: 7), (Category: L2), (Description: An error occurred in PSE MP Microcode Driver which required exiting (and, hence, restarting) the process. This message records the location of the MP Core File.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message on the console and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-UPGRADE_STARTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that the Canbus Controller firmware on the specified loation is going to be upgraded with the image at the specified path.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-6-ERR_ASIC_OOR
### Response:
(Severity: 6), (Category: FABRIC), (Description: Fabricq encountered an out of resources error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-1-I2C_TIMEOUT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMIAP-3-CHKPT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A call to checkpoint function failed for the virtual ip address of that vrf), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-6-OPTICS_REMOVAL
### Response:
(Severity: 6), (Category: L2), (Description: Optics module has been removed. %d - indicates the bay number), (Recommended Action: None. This is an informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_SEQ_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 0 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_INTERNAL_SW
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Server encountered the annunciated SW error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-BADCHKSUM
### Response:
(Severity: 6), (Category: ROUTING), (Description: OSPF has detected a checksum error in an LSA due to memory corruption.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show ospf bad-checksum)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_ACL_CONF_MGR_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize callback functions from ACL configuration manager to perform hardware resource checks and ACE resequencing.), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-CONFIG_SET
### Response:
(Severity: 3), (Category: ROUTING), (Description: A speaker or the bRIB failed to process a configuration change.), (Recommended Action: Please try to recover by rolling back the last config change and re-applying it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-INIT_CHECK_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while checking if PM Library is initialized due to one of the following reasons: 1. Invalid Arguments passed to function 2. Unable to find information pertaining to requested window 3. Error occured while fetching shim information), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-TSPI_ASYNC_FIFO_H72_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: TxSPI async FIFO high 72bits data single bit ECC error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-6-ENFORCE_DISABLED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing is disabled.), (Recommended Action: The customer should install license on router before enabling licensed feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-7-MSG_QUEUE_LONG
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-UNKNOWN_ERROR_TYPE
### Response:
(Severity: 4), (Category: INSTALL), (Description: An incorrect parameter was passed to the error reporting function. The errors for this install operation will not have been reported correctly.), (Recommended Action: This impacts only the error logging for the current install operation and has no impact on functionality. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_4_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-REMOTE_ACCESS_MAIN_PORT_FAILURE_CLEAR
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has recovered from the remote access failure and has attempted to recover the ports in the redundancy group.), (Recommended Action: This message may not require any action. However the <CmdBold>show l2vpn iccp-sm group group-num<NoCmdBold> command may be used to verify the state of the ICCP-SM interfaces. Reference the L2VPN ICCP-SM section of the IOS XR documentation for details on core isolation failures and related configuration commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_PM_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An I2C error was encountered when attempting to access the fault / alarm information of a Power Module.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-USER_DEF_TCAM_KEY_PARAM_MISSING
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The ACL match field or action mentioned in the error string is not configured in the TCAM using the hw-module command.), (Recommended Action: Program the match field or action in the TCAM Key using the hw-module command. Reload the LC. Attach the ACL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_DEBUG-3-LTRACE_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Ltrace library initialization failed), (Recommended Action: Please contact Cisco TAC for support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCCLIB-3-ERR_SW_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: software initialization error, due to error in rcc library intialization. The error message has detailed information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-FORCE_DISABLED
### Response:
(Severity: 4), (Category: MGBL), (Description: An error was encountered while the Central Configuration Validator (CCV) was initializing. Attempts to modify system configuration while CCV is disabled will not be validated.), (Recommended Action: The process restart should be investigated, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-CONNECT_WARN_AN_USING
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'This interface will be used by autonomic-networking.To enable other ' 'features disable autonomic-networking on this interface using ' ''no autonomic connect' command.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-6-PRODUCT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Product info), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_AAA_ATTR
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the AAA attribute service. The error message describes what operation has failed and why it failed. The most likely reason for this is low memory resource or a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-6-PORT_LOOPBACK
### Response:
(Severity: 6), (Category: L2), (Description: A PDU has been received on a port which was identical to that sent out of that port. This suggests that the port may be looped-back into itself.), (Recommended Action: Check the port wiring and whether loopback is configured on the port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-6-STATE_CHANGE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The platform licensing client is transitioning from one state to another.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_1_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_DLL_SYM_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fail to load the library. Check the the symbol exit in library or not '), (Recommended Action: check the library for the symbols)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-INV_MSG_TYPE
### Response:
(Severity: 3), (Category: SYSDB), (Description: Message type received by SysDB is invalid or unknown.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-HEALTH_MONITOR
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq driver monitors the ASIC every 5 seconds to look for any problems. If an error is reported momentarily, it could be a false positive seen during a transient state, or during oversubscription. In case, the error is seen repeatedly, please contact TAC support.), (Recommended Action: If the error persists, please contact TAC suppport.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-4-GET_THREAD_SCHED_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unable to get thread information to set new priority. Proceeding with default priority, however in a high CPU consumption, this node's heartbeat pulse may get lost, causing this node to get reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error information), (Recommended Action: Please collect the console log and CLI history (show cli history detail loc <>). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-AGENT_DEREG_SUCCESS
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing deregistration successful.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-COMPRESS_OFF
### Response:
(Severity: 6), (Category: OS), (Description: Compress library initialization for the file failed. The file will become uncompressed one with '.Z' suffix.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_RM-2-NOMEM
### Response:
(Severity: 2), (Category: L2), (Description: Memory on the router is critically low. %d - amount of memory that is tried to be allocated), (Recommended Action: Check for memory conditions in the system. LC reload alone can recover from this situation. All info to be collected before the reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-QUEUE_LIMIT_OVER
### Response:
(Severity: 7), (Category: OS), (Description: The destination queue is full. New enqueue request will be discarded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-BITS_MODE_NOT_SUPPORTED_IN_HARDWARE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The synchronization ports 0/1 are for BITS mode, but this mode is not supported on this platform), (Recommended Action: Do not attempt to configure BITS on RP clock interfaces 0 and 1)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RASF-2-NO_CMP_RETRIEVER
### Response:
(Severity: 2), (Category: ROUTING), (Description: This is a logic error in the construction of one of the ORA entities. The function to actually perform the compare retriever operation was not defined.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FIA driver failed to initialize the device resulting in the restart of the FIA driver process. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: Verify that the fia_driver is up and running by executing the following command at the CLI of the active RP: 'show process fia_driver location < >' If it is still non-operational, enable the following debugs of the FIA driver process: eio All EIO library events error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events Restart the driver by executing the following command at the CLI of the active RP: process restart fia_driver loc <loc> If the problem persists, this could be indicative of a hardware failure and it is recommended to run the field diagnostics on the failing MSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_STATIC-4-ERR_STATIC_LABEL_DISCREPANCY
### Response:
(Severity: 4), (Category: ROUTING), (Description: To clear label discrepancy), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-MUTEX_OP_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-5-TMP_PATH_FULL
### Response:
(Severity: 5), (Category: OS), (Description: /tmp/dumper is not available because it is full of files still being transferred.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-OS_IMAGE_SIZE_ERR
### Response:
(Severity: 5), (Category: L2), (Description: The size of the SPA OS image is too big.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALPHA_DRIVER-2-CARD_RELOAD_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The Alpha Driver attempt to reload RP has failed. Please reload the card.), (Recommended Action: This log is just to notify that there has been a failure when we attempted to reload the chassis. Please perform a manual RP reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_DAPS
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the DAPS address pool service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the DAPS service, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP Tx power greater than or equal to the high Tx power warning threshold. The XFP is the pluggable optics on the line cards. The Tx power threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Replace the XFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-ING_L4_ARRAY_UFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: L4 array underflow on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-CARDSTATE_INCONSISTENT
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: There is a mismatch in state between cluster manager and shelf manager this may cause system in-stability), (Recommended Action: execute - show tech-support spi - and contact cisco support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_FGID_WRITE
### Response:
(Severity: 3), (Category: FABRIC), (Description: One or more ASICs for the stage on the fabric card are in being reset. Hence this multicast FGID write operation for the specified stage is aborted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-BADFILTER
### Response:
(Severity: 4), (Category: MGBL), (Description: An invalid filter name was entered for the related class.), (Recommended Action: Use the classinfo command to get more information about available filters for a given class. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-4-PD_COMPONENT_ERROR
### Response:
(Severity: 4), (Category: MEDIA), (Description: PD component returned error for nvram classic_rommon_setvar function call), (Recommended Action: Nothing needs to be done)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: ClkCtrl LWM reply error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-QSM_NOTIFICATION_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Reddrv had problem to broadcast dead node name notification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-SHM_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB uses shared memory to store adjacencies, but encountered an error when trying to initialize it. The process will attempt to recovery by restarting. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: This shows that there are underlying system level problems, so review all recent unsolicited errors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_THREAD_ATTRIBUTE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while setting the thread attribute during the process initialization sequence. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLC-6-MSG_BCDL_THROTTLED
### Response:
(Severity: 6), (Category: OS), (Description: BCDL consumer is not processing the messages from enqueued by bcdl library, causing the CBP buffer state to be critical.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: ClkCtrl Event Manager notify error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-SYSDB
### Response:
(Severity: 3), (Category: OS), (Description: An internal sysdb function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-7-EVM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: OS), (Description: The event infrastructure will ignore this error and continue to wait for the next event. If this error is seen repeatedly, the process may not be able to function and will need to be restarted.), (Recommended Action: Collect the output of show tech-support, show processes , show memory, debug event-manager attach job <> and show watchdog memory-state from the location the error message comes from. If the error message doesn't persist, it can be ignored. If the error message persists,call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_EDM-3-DATALIST_SET_MORE_FLAG
### Response:
(Severity: 3), (Category: ROUTING), (Description: A client has requested information through SysDB from OSPF. During execution of the request an attempt to set a flag indicating there is more data for the client failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_4P_OC192-3-MEM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: fail to allocate memory.), (Recommended Action: sysmgr would restart the process. show process memory <> to find out whehter there is potential memory leak show memory <> to confirm system memory goes low)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_SPECIFIC_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that an operation specific to a node has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-SSM_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: The quality level of the source has been changed to or from FAIL. The SSM Failed alarm occurs when the synchronization status messaging received by the device fails. The device is set up to receive SSM, but the timing source is not delivering valid SSM messages.), (Recommended Action: 1. Verify that SSM is enabled on the external timing source. 2. If timing is enabled use an optical test set to determine that the external timing source is delivering SSMs. 3. If the alarm does not clear contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-SM_MISMATCH
### Response:
(Severity: 3), (Category: DRIVER), (Description: ESD detected inserted optics does not match with details in cluster layout.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
c2c-3-ERR_SW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The C2C common library encountered an error which it cannot resolve.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of Cisco IOS XR Syslog in monitoring and troubleshooting?
### Response:
Cisco IOS XR Syslog is a logging mechanism that allows the router to generate messages about system events, errors, and status changes. These messages can be used for monitoring, troubleshooting, and auditing purposes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-3-HW_UT_DRIVER_ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Driver attach has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLDR-3-PARTNER_IS_DOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This node has detected its partner has gone down.), (Recommended Action: There is no action required. The system should recover by undergoing a switchover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PW_INTR_HDR_PRS_SOP_EOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PW_INTR_HDR_PRS_SOP_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-7-GENERIC_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The message is used to report generic info about Services CGV6 SERVICES.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_BUF_CRC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected excessive input buffer CRC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_CFEC_BDI_DEM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SETSOCKOPT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an error whilst configuring the socket it uses for network I/O. As a result the socket is unuseable and IS-IS cannot perform I/O. IS-IS will attempt to recover by closing the current socket and schedule an attempt to reconnect.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider restarting the IS-IS process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable RSVP on a Cisco IOS XR interface?
### Response:
To enable RSVP on an interface in Cisco IOS XR, use the 'mpls traffic-eng interface' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng interface GigabitEthernet0/0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-3-CLIENT_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Initialization of the DLL failed for the client due to indicated reason.), (Recommended Action: None. The initialization will be retried automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-REGION
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: bfm encountered an error and is not able to recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-COPY_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A file involved in the current request or operation could not be copied. This may impact install infrastructure functioning.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-SCHED_PRIORITY_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver was unable to raise the priority of the interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_DIR-3-AGENT_MOD_TO_ORCH_MSG_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: The Agent module encountered an issue while attempting to send a message to the Orchestrator module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-INIT
### Response:
(Severity: 3), (Category: OS), (Description: An NRS Server hit an error from which it could not recover during initialisation and is restarting to continue normal operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-SWITCH_BACK_TO_DEFAULT_NNS_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: XLNCd runs in the default linux network namespace. However, in order to perform some system calls, XLNCd must switch namespace. After performing the calls, XLNCd will switch back to the default namespace, but this has failed, and XLNCd is now running in the wrong namespace.), (Recommended Action: If the problem persists, restart the process. If the problem persists through process restarts, If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HOSTNAME_SYNC-4-NODE_ROLE_CHNG_REG_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Failed to register to sysmgr for node role change notification.), (Recommended Action: 'process restart hostname_sync')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-NETIO_OUTPUT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS was not able to send a packet to NetIO. This could be because of communication problems between CLNS and NetIO.), (Recommended Action: If this message is seen during transient conditions, for example when NetIO is restarting either because of install operation OR because NetIO crashed then it is not harmful unless you see ISIS adjacencies dropping. If it is seen under steady state conditions or re-occur then please contact cisco-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-INVALID_BIND
### Response:
(Severity: 3), (Category: SYSDB), (Description: A SysDB client tried to bind to an unsupported path. This may cause unexpected client behavior.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-INITIALISATION_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: The process will automatically exit and will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_ALL_FT_REMOVED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when all the fantrays are removed from the satellite. Satellite chassis shutsdown after two minutes from the time alarm is rasied.), (Recommended Action: Please insert at least one fan tray into the satellite chassis)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-ERR_PROC_READY
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospf_uv process was unable to signal process ready to sysmgr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_MLDP_LIB-3-MLDP_PROD_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while processing the request on the pim mldp producer. The producer received an unkown message type or an unexpected request.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mlib trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mlib trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show pim trace mldp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show pim trace mldp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show buffers<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show buffers<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-RELOAD_NODE_INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: The installation required a reload of the pID's node, and this is now going ahead.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CB_OFF_ALARM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Two possibilities to this message 1) An alarm has occured. 2) A previously occured alarm has been cleared. power shelf circuit breaker alarm, there might be an internal wiring failure. The power shelf circuit breaker trip wire might be touching the chassis or ground. Or circuit breaker on/off triggered.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-SCRIPT_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error occurred during netio script processing. Please check the error message for more details.), (Recommended Action: Check if the script file exists and is in correct format. If the message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-UNEXPECTED_EVENT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node received an unexpected/illegal pulse while running in specified state. Node should not undergo inappropriate action or state change on receiving such unexpected pulse.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-UART_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in UART READ/WRITE access to NPU memory. Exact Cause of the error will be mentioned in the message displayed. This error causes Linux/Application image download and launch to fail.), (Recommended Action: Do cold reboot of Services PLIM MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-IM_CB_NAME_TRUNC
### Response:
(Severity: 4), (Category: ROUTING), (Description: The length of the context string used to register for Interface Manager callbacks exceeded internal limits and was truncated. If truncation results in registration contexts no longer being unique, this could cause problems with event registrations.), (Recommended Action: This should not happen. The condition represents an internal error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-CSF_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: A new CSF packet was received by a local MEP. This message appears because the service to which the local MEP belongs has CSF logging configured.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-7-ERR_CHKPT_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID Allocator was unable to initialize the checkpoint library. The fgid_allocator process may need restarting, if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_REBOOT_TIMEOUT_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card is being reset because of timeout waiting for the indicated node to perform software reboot. This failure recovery action happens after shelf manager has received notification from the node about its intent to reboot, the failure to self reboot triggered the reset action on the card.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-7-OPERATION_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a programmed diagnostic debug message.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_STATE_MONITOR_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-7-MESSAGE_SEND_FAILURE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Sending message got failed. Please check the error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTH_SRV-3-ERR_3_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: auth srv exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_MSG_ATTACH
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when attaching a handler for an Event Manager synchronous message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-SYSTEM_COLD_START
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The system is recovering either from a cold restart situation or a state where no valid shelf controller cards were available.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install activate commit command in IOS XR?
### Response:
The 'install activate commit' command is a combination of 'install activate' and 'install commit'. It activates the specified packages and commits them as the persistent set in a single step.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-DEV_SFP_OPTICS_PORT_UNSUP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A SFP Module not supported for the port error was detected during SFP initialization. A SFP Module not supported for the port error is reported when Optics is not supported on the port. The SFP is the pluggable optics on the line cards. SFP initialization may happen when linecard boots up, SFP OIR and line card process restart. Traffic will not be impacted by this error.), (Recommended Action: Check the 'show controller <i/f> internal' to see whether the SFP Module is supported for the port. If there are no port unsupported alarm then replace the SFP with a working one (if any) to isolate bad optics. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the command 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_OPTICS_SW_HW_INCOMPATIBLE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-NSF_STOP
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_BAD_ALIGN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_BAD_ALIGN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-PCIE_RESP_FIFO_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: PCIe response FIFO multiple bits error.), (Recommended Action: Reset the board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-IFIB_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Failure encountered in IFIB lookup.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_13_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPL-3-PAK_CSUM_MISMATCH_NG
### Response:
(Severity: 3), (Category: OS), (Description: A checksum mismatch was detected for a packet by NAL), (Recommended Action: The clients of NAL will attempt to recover from this situation by retransmitting the packets. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-MODULE_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: L2), (Description: The optics module is not supported in the port it was inserted in . The user will need to remove the optics module from the current port .), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-NON_RELOAD_PARALLEL_LR
### Response:
(Severity: 7), (Category: INSTALL), (Description: The restart information in the PIE file is invalid. PIEs that use the 'parallel-lr' install method must use a restart type of 'reload'.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the main components of RPL on IOS-XR?
### Response:
The main components of RPL on IOS-XR are\n- Policies - Contain a series of statements to evaluate routes and apply actions\n- Sets - Groups of elements like prefixes, AS paths, communities that can be referenced in policies\n- AS path sets - Define AS path filters\n- Community sets - Define community filters\n- Prefix sets - Define prefix filters\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-HW_MOD_PROF_ACL_FRAG_NOT_SUPP
### Response:
(Severity: 4), (Category: FABRIC), (Description: This message will typically occur when the fragment filter is specified for a linecard that does not support it or when native mode is not enabled.), (Recommended Action: Remove the fragment filter from the IPV6 User Defined Key for this linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOFRR_FLOW-3-WD_OOR_GREEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: By removing the over-configured MoFRR routes, the total number of MoFRR enabled flows is being reduced. When the total number is first time reduced to exactly 75% of maximum supported (1024) MoFRR routes of current release, i.e., 768 routes, this message will be printed on the console and only once.), (Recommended Action: Use show mfib hardware route summary location <location> to check currently total number of MoFRR routes configured in the platform. Then User can configure more MoFRR routes till the Maximum supported MoFRR routes: (1024 for Trident LC, and 2048 for Typhoon LC) has been reached.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_SHIM-7-DRV_ERR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Error condition from switch driver which may affect spanning tree operation on control ethernet. Normally spanning tree can tolerate a few of these errors as long as the driver comes back to a good state. Large number of these messages can indicate bad health of control-ethernet.), (Recommended Action: Check if the switch driver process 'bcm_process' is up and running. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNLIB-3-INTERNAL_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: This is an internal software error in snlib test.), (Recommended Action: 'Delete and add snmp config ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMACTRLR-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of IMACTRLR.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KENSHO_GL-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational Topaz LC Kensho-GL CPU Subsystem DLL message.), (Recommended Action: Nothing. Reporting normal progress of Topaz LC Kensho-GL CPU Subsystem DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SATORI-6-SETTIME_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: It is an informational message indicating that set time has failed, this may be a program level issue), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of BGP communities?
### Response:
BGP communities provide a way of grouping destinations into communities and applying routing decisions based on the community. Each community is represented by a 32-bit value, with the format AS:NN. Well-known communities include no-export, no-advertise, internet, and local-as.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-4-UNKNOWN_SHELF_ID
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The value read from the power shelf backplane does not match any of the known shelf ID values. Please check the EEPROM programming.), (Recommended Action: Please check the EEPROM programming of the power-shelf backplane. 'show diag power-supply eeprom-info' in admin mode gives a raw dump of the EEPROM data. Refer EDCS-137763 to interpret the data to check if the shelf ID is programmed correctly or not. If the shelf ID is incorrect, the unit will have to be RMA'd to reprogram the EEPROM correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_MTU_REDUCED
### Response:
(Severity: 4), (Category: ROUTING), (Description: The IS-IS MTU was adjusted to accommodate the fabric MTU of the system. This new MTU may be smaller than the actual MTU allowable by the physical interface.), (Recommended Action: Check any MTU configuration for the interface to ensure that this is not a configuration error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV6_EA-3-PARAM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A parameter inconsistency has been detected in the IPv6 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-DLL_LOAD
### Response:
(Severity: 6), (Category: FABRIC), (Description: Fabric driver loaded for the SEA asics.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_AIS_DEMC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-3-ERR_REGISTRATION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Message send got failed it might be an LWM issue. Please refer the errno in the message for more detail.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_RID_SES_THRESHOLD_NOT_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Remote ID is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_NO_MEMORY
### Response:
(Severity: 3), (Category: SECURITY), (Description: A failure at an attempt to allocate memory was detected.), (Recommended Action: 'This indicates low memory condition, please try after freeing up some resources.' 'If this message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-READ_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be read, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-COMM_DECODE_RDINFO
### Response:
(Severity: 3), (Category: ROUTING), (Description: Standby BGP received invalid Route Distinguisher information from Active BGP. *SUPPORT*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_CFGMGR_REMOVE_DELETES
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_EDM-3-SYSDB_EDM_LIST_ADD_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT-2-ALM_CRIT
### Response:
(Severity: 2), (Category: SERVICES), (Description: The monitored flow has traffic issues as indicated by the react trigger. The problem is introduced either at some upstream router or even at the traffic source itself. Alternatively, a configuration mismatch between the traffic source and this router (for the flow data rates etc) can cause this error.), (Recommended Action: Check to see if traffic source is indeed sending traffic. Check that the traffic characteristics defined at the source match that on the monitoring router. Trace the traffic flow upstream to the source and verify flow-mon statistics at each applicable hop. Check for packet drops for the flow at intermediate hops - between source and the monitoring router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP autoconfiguration?
### Response:
To enable LDP autoconfiguration, use the 'auto-config' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#auto-config
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NRS_LIB-1-REALLOC_ERROR
### Response:
(Severity: 1), (Category: OS), (Description: Nrssvr is unable to allocate more space to expand it DB for addtional registrations. This is mostly due to memory fragmentation.), (Recommended Action: Try process restart of nrssvr process since that may free up memory & allow for contiguous allocation in nrs Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-0-ASIC_ERROR_BOARD_RELOAD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Mulitple reset occurred, need to reload board), (Recommended Action: Due to too many reset, board has been reloaded to recover *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_START_JID
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAPS-6-UTIL_LOW
### Response:
(Severity: 6), (Category: IP), (Description: Utilization dropped below low threshold across all pools. It shows that the existing pools are not utilized well at this point of time. If the utilization is always less than low threshold, pool size can be reduced. Pool utilization can be monitored using the command 'show pool ipv4/ipv6'.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLDR-7-INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: XRv sysldr information message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-XFER_CORE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-LABEL_INCONSISTENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-CRITICAL_PORT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected a failure on a switch port that is critical for control ethernet connectivity. All attempts to recover from the failure by re-initializing the port were unsuccessful, so ESD will reset the switch, then exit so that it will be restarted by the process manager.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet', and 'show controllers switch trace' commands. Also collect the OS kernel logs. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-CONFIG_DOWNLOAD_SUCCESS
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Download of the config file to the Running config is Successful'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-NO_PLATFORM_DATA_FILE
### Response:
(Severity: 3), (Category: OS), (Description: The platform data file doesn't exist.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_UNLOCK
### Response:
(Severity: 3), (Category: OS), (Description: APS MUTEX LOCK. It is applicable for Debugging of Mutex implementation for APS.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-CONN_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'CTRLIO Connection establish failed.'), (Recommended Action: 'ISSU manager will retry operation.' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_PLIM_SB-3-FPD_IMG_DNLD_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The FPD image download operation for the indicated device has failed. The cause of the error is also indicated in the message.), (Recommended Action: Retry the image update operation and if it fails again, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_33
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: These are unexpected errors), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-PARITY_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: Core dump is aborted if the cause for the crash is hardware specific error.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-NOT_INDEXED
### Response:
(Severity: 7), (Category: HA), (Description: Errors (most likely lack of memory) prevent CDM from creating an index structure associated with an indexed table. This condition does not affect the functionality at all, only the performance will suffer.), (Recommended Action: The CDM software will periodically try again to set up the index structure. So, in general no action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-CONFIG_PARAM_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The parameter passed is NULL and call to function getting configuration will fail. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'install prepare' command in Cisco IOS XR?
### Response:
The 'install prepare' command in Cisco IOS XR is used to pre-download software packages to the router and prepare them for activation, allowing for a smoother upgrade process.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP_LIB-7-EXIT_MESSAGE_INFO
### Response:
(Severity: 7), (Category: IP), (Description: NTP process went through re-initialization following a specific condition. It can safely be ignored.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-7-DEBUG
### Response:
(Severity: 7), (Category: SNMP), (Description: A Debug message for information.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-INVALID_RANGE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is a boundary error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Out of supported range. This condition indicates the value is not in allowed range.), (Recommended Action: *Contact Cisco TAC to diagnose the problem*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-PFC_MIB_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error occured while trying to collect MIB data requested by the SNMP infrastructure. The data for which an error was encountered will not be presented in SNMP 'get' request results.), (Recommended Action: Such errors are not expected, and probably indicate an out-of-resource condition, or an inconsistency in the system state. Wait for any likely transient root problems to subside, and attempt to repeat the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-LOW_THRESHOLD_LARGER_THAN_WINDOW
### Response:
(Severity: 3), (Category: L2), (Description: For low threshold events to be possible, it is required that the number of possible errors in the configured window is at least as large as the low threshold, which is not currently the case. Note that when window size or threshold is specified in frames or symbols, its length in milliseconds depends on the maximum bandwidth.), (Recommended Action: Consider changing the relevant configuration (i.e. the window and/or low threshold size).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the insthelper process in IOS XR installation?
### Response:
The insthelper process assists the instdir process by performing file-related operations on behalf of instdir, such as copying files from the router to the TFTP server or vice versa.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-7-SEND_PACKET_FAIL
### Response:
(Severity: 7), (Category: IP), (Description: The transport fails to send a message with packet to the network layer.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_CLEAR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error encountered in RIP clear server.), (Recommended Action: Please retry the command. If the error persists open a case with TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-ERR_EVM_NOTIFY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl Event Manager notify error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-ASSERT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal consistency check failed. There may be no immediate impact on traffic, but this issue should be addressed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp graceful-restart' command in IOS XR BGP configuration?
### Response:
The 'bgp graceful-restart' command is used to enable the BGP Graceful Restart capability. Graceful Restart allows a BGP speaker to continue forwarding traffic while the BGP process is restarting, thus avoiding traffic loss during a planned or unplanned BGP restart. It requires the BGP peers to also support the Graceful Restart capability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-6-IMA_KERNEL_DRAIN_FAIL
### Response:
(Severity: 6), (Category: MGBL), (Description: Kernel IMA data failed to be freed after adding into disk cache.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-RPKI_ADJCHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: An RPKI cache has either come up or gone down.), (Recommended Action: This message is informational.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_BMADJ-3-ERR_STR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM BMADJ, error information), (Recommended Action: Please collect the console log, bundle traces (show bundle trace loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_ABORTBULK
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-PCIE_FC_ENUM_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCIE enumeration error was detected for this Fabric Card. The error prevents this card to do traffic switching thereby making it unusable), (Recommended Action: Please correct the problem by OIR the FC card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-MIB_INDICES_EXHAUSTED
### Response:
(Severity: 4), (Category: L2), (Description: The pool of MIB indices to assign to Frequency Synchronization sources has been exhausted. MIB data from the Frequency Synchronization feature may be inaccurate.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-NO_I2C_TOPO_FILE
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA driver was not able to retrieve I2C topology file to perform basic driver initialization. Process will be restarted to attempt to recover from this.), (Recommended Action: Check for missing hardware abstraction layer implementation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-ENTITLEMENT_RENEW_FAILED
### Response:
(Severity: 3), (Category: LICENSE), (Description: The device has failed to communicate with Cisco to renew the entitlement authorization.), (Recommended Action: Please check the smart agent syslog messages for further information. Also, please check Smart Call Home settings and network connectivity to cisco.com.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SUSPENSION_START
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ERR_INVALID_L2ACL_CONF
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Only 2 ACE's allowed, 1st ACE has to be Deny on ISIS DMAC, 2nd ACE has to permit any any, rest all the config is invalid.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR handle packet filtering?
### Response:
Cisco IOS XR handles packet filtering through the use of ACLs and Unicast Reverse Path Forwarding (uRPF), providing mechanisms to control the flow of traffic and prevent spoofing attacks.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV6_EA-3-ERR_MEM_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_XRV_SCH_LIB-3-EVM_ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Smart Call Home failed to attach an event handler function to EVM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-HW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Plim Asic errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and can trigger a reload of the LC.), (Recommended Action: Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-ROOT_USERDB_INIT_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Accounting daemon failed to create/remove the root user database on the disk0. This will affect authentication to ksh since it refers to this database.), (Recommended Action: As a workaround an admin could create this directory in disk0 himself. This should get around the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-SYSDB_BIND_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Sysdb bind error. OBFL will fail to function as critical config data is kept in sysdb.), (Recommended Action: collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_FPD-2-GOLDEN_IMAGE_BOOT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that the FPD booted from golden image due to issue with primary image.), (Recommended Action: Upgrade the primary and take action based on the status after upgrade)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_EDM_FNS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_IFH_UNBIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-ERR_VRFN_FNS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospf_uv process was unable to initialize SysDB callbacks.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-WHITEBOX_INVALID_B2B_DETECTED
### Response:
(Severity: 3), (Category: INFRA), (Description: An invalid Back-to-Back connection has been detected.), (Recommended Action: Determine if the event was due to a fault. If so, the root cause need wiring/connectivity check.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-SKIP_NRV_RECOVERY_NOTICE
### Response:
(Severity: 5), (Category: ROUTING), (Description: User has tried to do switchover for this tunnel to recover from \ non-revertive path. However, this tunnel currently has no pending \ LSP that's ready to take traffic. The requested switchover has \ been abandoned and the tunnel will continue to use the current \ in-use path.), (Recommended Action: Ensure that the pending LSP is fully established before attempting \ to recover a non-revertive tunnel.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-AUTO_RECOVERY_RETRY_DISABLED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Auto-recovery failed on an interface and will not be retried due to the auto-recovery configuration being deleted.), (Recommended Action: This is a warning message and no action is required. An interface that is no longer configured for auto-recovery was not auto-recovered at the final attempt because the error-disable condition still holds. The interface will remain in error-disable state and auto-recovery attempts will now cease. Future attempts to clear error-disable state should be done manually or auto-recovery should be reconfigured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_OVR_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA01 burst FIFO overflow error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_SERVER-6-GN2412_CHIP_RECOVERED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-WAN_SWITCH_FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_SRG_ATTR_GET
### Response:
(Severity: 3), (Category: IP), (Description: Cannot determine whether SRG is enabled or not on the interfaces), (Recommended Action: Restart IPv6 ND)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_EDM_FNS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-INTR_DISABLED_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: NP experiencing storm of interrupts. Disabling interrupt to avoid CPU HOG. Will be activated only after a line card reset), (Recommended Action: Identify the cause of interrupt storm)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-LINK_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. Topology between FSDB and hardware is not matched. This issue may be fabric plane config issue or Fabric mis-cabling between S13 and S2 cards. 2. For Link in error state : This link is in error state due to errors on the link.), (Recommended Action: Reset the link. In most cases after reset of the link it should come UP fine. Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. 'show running controller fabric plane' 2. show controller sfe link-info rx 0 127 topo instance all loc <loc> 3. Collect all traces:'show controller sfe trace all location <loc>' 4. Collect DSC and eyescan data for this link and also for the far end link Steps to collect DSC and eyescan : 1. Disable link_mon thread 2. Disable Stats thread 3. Disable rx_los for the link 4. Collect DSC and eyescan If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-LOW_LASER_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP laser bias less than or equal to the low laser bias alarm threshold. The XFP is the pluggable optics on the line cards. The laser bias threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SP_INVAL
### Response:
(Severity: 4), (Category: OS), (Description: Core dump failed because the stack pointer is corrupted.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-BOOT_IMAGE_COMPLETE
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP has successfully performed pre-provisioning actions that include booting of an image.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-3-FOLLOW_STANDBY_MISMATCH
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Conflicting 'follow standby' instructions were supplied to the Adjacency Manager for an interface. 'Follow standby' is specified for an interface by a Service State Controller if it believes that traffic should be directed towards the standby, rather than active, service instance. This message indicates that the active and standby Service State Controllers gave conflicting information about where traffic to be directed to. This indicates an inconsistency between the system state as viewed by the Service State Controllers that are responsible for the service to which the interface belongs. Restarting those processes may help, after allowing any other problems that could lead to inconsistencies being resolved. No adjacencies will be installed for the interface, and all traffic to it will be dropped.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_BRIDGE_EVM
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Bridge driver Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-CHANNEL_NOT_PROPER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: channel_connect_id is not proper for SPP PDMA. %s- Function Name. %d- Line number.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISK_DRIVER-3-FAILED_TO_CREATE_EVM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ATA device might report these errors when it unable to create ATA_EVM.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_INFO_NOT_SUPP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, feature not supported), (Recommended Action: This error is expected since the feature or the scale being configured is not supported. If you believe there is still some problem, please collect FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show version', 'show platform' and 'show console logging' output. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP7
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-TIMER
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The packet subsystem encountered an error while operating/handling a timer.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-FREE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while releasing shim window memory due to one of the following reasons: 1. Invalid arguments passed to the function 2. Error occured while performing memory related operations), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-MBE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A multi bit error was detected in RAM of the IM in given slot. IM will be soft reloaded for recovery), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-6-FABRIC_BANDWIDTH_HIGH_THRESHOLD
### Response:
(Severity: 6), (Category: FABRIC), (Description: When the available fabric BW goes above the required BW that corresponds to the high threshold, then the front panel ports of the LC goes back to unshut.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_PFI_LIB-3-SET_GLOBALS_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to set globals bacause of some shared memory issues.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-FD_INIT
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when initializing the fault detector.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-4-NO_ADDR_ASSIGN
### Response:
(Severity: 4), (Category: IP), (Description: The error occurs when Server is in process of sending ACK to client and while doing this tries to get IntF address/Client State/VRF etc. where it encounters failure. Thus leading to failure of Address assignment to client.), (Recommended Action: Retry)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-SHMWIN_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The DPA QoS EA module encountered a shared memory error. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR1_INTR_SHORTKT_DROP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR1_INTR_SHORTKT_DROP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of WDSYSMON in process monitoring?
### Response:
WDSYSMON (Watchdog System Monitor) is a process monitoring mechanism in Cisco IOS XR that detects process failures and initiates corrective actions. It monitors critical processes and can restart or failover to a standby component if a process becomes unresponsive or crashes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-RECOVER_FAILED
### Response:
(Severity: 3), (Category: MEDIA), (Description: The NVRAM device corruption recovery attempt has failed.), (Recommended Action: Restart nvram server process. If this doesn't help Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_4_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-DDR_LOSS_OF_SYNC_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on DDR interface on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the adjacency stagger command in IS-IS?
### Response:
The adjacency stagger command is used to stagger the formation of IS-IS adjacencies after a router reload or IS-IS process restart. This can help prevent all adjacencies from coming up simultaneously, which can cause a temporary spike in CPU utilization. By staggering the adjacencies, the CPU load is spread out over a longer period, which can improve system stability during a restart.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-TBLATTR_VERSION
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal error was encountered.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-OOR_OPER_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <ISM> show cef trace location <ISM> show cef platform services trace ipv4 all reverse location <ISM> show cef platform services trace common all reverse loc <ISM> show cef <destination ip> location <ISM> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_LOS_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For T1 mode LOS is declared (as detected by BITS receiver) when no pulses are detected in a window of 192 consecutive pulse intervals. In E1 and 2048kHz modes LOS is declared when no pulses are detected in a window of 255 consecutive pulse intervals. For UTI mode, LOS is detected by hardware as per J.211 specifications.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Check the cable integrity and cable connectors. The receive pair should be on pins 1,2 on the RJ-45 jack.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-5-DISABLED
### Response:
(Severity: 5), (Category: IP), (Description: TCP stack detected NSR functionality impairment and has disabled NSR for the connection.), (Recommended Action: Understand why NSR failed and take the necessary steps such as collecting core file, traces etc. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_XBAR-2-ERR_ACCESS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar driver detected an issue with ASIC read and write access. A persistent ASIC access error indicates an issue with the hardware.), (Recommended Action: Please power cycle the card using command: 'hw-module loc <> reload' and check if this error persists. If the error persists, then the card needs to be replaced.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-PCIE_CORE_ERROR_OVERRUN_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-3-EDM_OPER_SETUP
### Response:
(Severity: 3), (Category: ROUTING), (Description: MFWD-HFR library encountered error while initializing the edm oper handlers), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-CORE_PAGE_LOST
### Response:
(Severity: 4), (Category: OS), (Description: Not enough free memory to continue COPY option core dump, which allocate local memory for each meory segent.), (Recommended Action: Ensure that enough free space is present. If not, remove COPY option.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRID_SVR-7-ERR_INIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Initialization of lrid server process has failed due to one of the following reasons: 1) Failed to initialize LRID Server.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-FPGA_SPURIOUS_INTERRUPT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_MEM_ECC_FAIL_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory ECC failure on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. Please verify the bridge FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-6-SDRNM_INVOKED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-3-EPM_SWITCH_LINK_FAULT_NORELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: a critical link of EPM switch device is down), (Recommended Action: The board is not reloaded. At this stage please collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_10_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-3-STR_SIZE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error due to request for string size larger than supported.), (Recommended Action: Report to Technical Assistance. This error could result in some part of the RCMD report generated being incorrect or incomplete.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'l2vpn switchover' command in Cisco IOS XR?
### Response:
The 'l2vpn switchover' command is used to manually switch the traffic from the primary pseudowire to the backup pseudowire in a VPWS service with pseudowire redundancy configured. This command is useful for testing the redundancy setup and for performing planned maintenance on the primary pseudowire or PE router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_CCI_CREATE_Q
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot create pdma queue required. Likely a asic driver does not come up properly %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %d - number of seconds elapsed), (Recommended Action: Investigate if driver processes(ingressq, egressq or fabricq) initialized properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-EVENT_ATTACH
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_*_attach() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_LIB-7-CORRUPT
### Response:
(Severity: 7), (Category: OS), (Description: The infrastructure library detected a corrupt data structure while performing internal checks.), (Recommended Action: Run diagnostics to determine if this is a result of a hardware problem. If the problem reoccurs, a memory dump should be taken to assist TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-DEBUG_INIT_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Unexpected error is encountered while initializing the debug event.), (Recommended Action: If the message recurs, issue the command 'show mgmt-plane trace client <clientname> both' to gather data and provide the gathered information and the exact error message as it appears, to the Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HAL_COMM_DBG-3-ERR_INFO_VERBOSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error occurred in FIB engine layer for collecting traces. The message string indicates the reason for the failure. This message also provides an error code. Additionally, it provides a more verbose information of the error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-4-FILE_OPEN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to open log file for redundancy driver.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV4_EA-3-CRITICAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX IPV4-EA, Critical error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-4-WARM_RESET_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the PSE Driver to indicate that it failed to perform warm reset of specified pse instance due to the specified reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-5-TIMEOUT_CANCELLED
### Response:
(Severity: 5), (Category: HA), (Description: An event manager has resumed sending heartbeats. This happens when a condition that caused the hang is cleared.), (Recommended Action: The debugging information collected when the event manager stopped sending heartbeats should be examined and provided to technical support for analysis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-NODEID_EXTRACT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Either an invalid location is being queried, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-API_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'An API failed due to the mentioned error'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_CONN_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-INVALID_NODEID_RETURNED
### Response:
(Severity: 4), (Category: INSTALL), (Description: Install director detected that the passed in node was incorrect.), (Recommended Action: Collect insthelper traces from this reported nodes using 'show install trace insthelper'. This error will be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-BAD_PATH
### Response:
(Severity: 6), (Category: OS), (Description: Please configure a valid path for any exception path.), (Recommended Action: Try to configure other paths.Do not configure boot device as exception path.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_ON_ABORT_NO_RELOAD_INSTDIR
### Response:
(Severity: 6), (Category: INSTALL), (Description: When initiating the ISSU operation, the user specified the on-abort no-reload option. This message indicates that on abort, no recovery or clean up will be performed. The user has indicated 'on-abort no-reload' hence, no recovery will be performed as part of abort. This is a non-error condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_4
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-6-BOOT_MODE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The boot mode is detected and printed by the system during startup. Cold boot signifies system booting up fresh, HW ASICs getting reset. Warm boot signifies system booting up while ASIC continues to forward traffic.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-MALFORMED_PACKET
### Response:
(Severity: 4), (Category: L2), (Description: A packet that was unexpected or malformed was received. Most commonly this is the result of a misconfiguration, causing for example, PVRST packets to be received on a port that is configured with PVST-AG.), (Recommended Action: Verify the configuration. If the configuration is correct, investigate the problem on the sending host, or by using a packet sniffer to verify the packets are well-formed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-BAG_ENCODE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to encode a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_CORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory correctable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-MFI_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing something from or to LSD. This is a fatal software error and the IS-IS process will abort or become inconsistent), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-MEDIAERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Media table lookup failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-DUP_RTRID
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPFv3 received hello packet from a neighbor which has the same router ID as this routing process. A full adjacency cannot be established.), (Recommended Action: OSPFv3 router ID must be unique. Change the router ID.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XRV9K_INTF_INJ_CAP_DLL-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The ltrace file could not be created.), (Recommended Action: Please contact TAC Support Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_BDI_DEMD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_DIP2_ERR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control DIP2 parity error on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_INSERT_GLOBAL
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA tried to insert an interface into the global session tree which was already there. The error is probably caused by a programming error.), (Recommended Action: PPPoE MA should recover by itself.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-4-ROMMONA_DOWN_REV
### Response:
(Severity: 4), (Category: PLATFORM), (Description: For displaying down-rev notification.), (Recommended Action: tech support should be contacted for upgrade instructions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_6_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-2-ASIC_ERROR_CIH_INIT_THRESHOLD_EXCEED_IGNORED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Ignoring CIH persistent card threshold exceed condition due to user recovery file), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_LOSS_OF_LOCK
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_TIMER_ATTACH
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-MCLAG_CONFIG_CONFLICT
### Response:
(Severity: 4), (Category: L2), (Description: A configuration conflict has been detected: Interface %s already used by ICCP-SM feature. MCLAG will not work until the conflict is resolved.), (Recommended Action: For MCLAG to work for this interface, one must delete relevant configurations for both ICCP-SM and MCLAG. Then re-configure MCLAG.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-ADJACENCY_UPD_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'CTRLIO Adjacency update failed. ' 'Updating shared memory entries failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM_SHOW-7-USAGE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Startup option supplied to HFR_PM_SHOW is not valid.), (Recommended Action: Please re-enter the correct option as described in the usage message 'Usage: hfr_pm_qos_gran_show -G [-N <node name>]' Example: show hw-module qos shape granularity location 0/2/CPU0, or run hfr_pm_qos_gran_show -G 33)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-5-SYNC_DONE
### Response:
(Severity: 5), (Category: INFRA), (Description: The requested sync of sessions has been completed. This is in response to CLI command and any inconsistencies in the state between the peers would have got resolved.), (Recommended Action: None required since this is in response to an administrative action that caused this synchronization of sessions. Session status may be checked on the router to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-7-FAILMSG
### Response:
(Severity: 7), (Category: INSTALL), (Description: Interpret the error string.), (Recommended Action: Check for disk corruption using 'fsck' disk check CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CRRS_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_INSERT
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods insert error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB-3-CERR_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_INFRA_MGR-3-SYSDB_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The message indicates the failure in registering the user service instance in the database.), (Recommended Action: Please provide the following logs: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - Show logging - show services secontroller trace reverse location <ISM>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-3-ERR_SYSDB_UNREG_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurrred when accessing the system database), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-IMPROPER_PREFIX_MASK_LEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: A client sent a batch to RIB containing an invalid op code.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-2-DISABLE_PORT
### Response:
(Severity: 2), (Category: L2), (Description: UDLD protocol detects if a link is uni-directional and disables the port. Uni-directional links can cause problems in ethernet networks and should be fixed.), (Recommended Action: Check the link on which the error happenned. Try replacing/reconnecting the GBIC/SFP/cable at either end of the link. Re-enable the port on the RP and see if the port comes up. If the problem still exists the port will be disabled again with this message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_UCORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE uncorrectable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-CLINFO_SAVE_DATUM
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to save an application datum associated with the given channel handler.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-SPA_OVERTEMP_MAJOR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: SPA temperature is risen above or fallen below major threshold.), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-FABRIC_PRGM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed programming batch in fabric from PD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-MASA_AUTH_FAIL
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'The MASA - manufacturer authorised signing authority ' 'has not authorised this device in its network'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-SHUTDOWN_ON_ENVMON_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being brought down to IN_RESET state due to occurence of multiple critical environmental alarms on the node related to power/voltage/temperature.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_EA-4-ERR_RWMGR_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP EA encountered an error communicating with Rewrite Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Rewrite Manager Server process, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP EA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-ISSU_OP_ABORT_FABRIC_RELOADED
### Response:
(Severity: 2), (Category: INSTALL), (Description: During ISSU operation, the specified fabric node was reloaded unexpectedly thus the current ISSU operation is aborted.), (Recommended Action: Please ensure that the fabric node is not reloaded during ISSU and retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-7-THREAD_CREATE
### Response:
(Severity: 7), (Category: OS), (Description: The pthread_create function reported an error.), (Recommended Action: Collect the output of show tech-support, show processes , show memory, and show watchdog memory-state from the location the error message comes from. If the error message doesn't persist, it can be ignored. If the error message persists,call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE4_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE4_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-ADDR_POOL_REUSE
### Response:
(Severity: 7), (Category: SERVICES), (Description: This address pool that is being configured is also used by different inside vrf of different cgn instance.It is supported by CGN.So you can ignore this message.Its just information message.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-4-IPACCESSRLIMIT
### Response:
(Severity: 4), (Category: ACL), (Description: The ACL library has requested the operating system to grant additional heap memory. The request has failed and the error indicating the reason has been given), (Recommended Action: Collect the requested show tech-support info and forward it to development engineering team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR optimal option?
### Response:
The MPLS TE FRR optimal option allows the best available backup path to be used for FRR by considering the tunnel's constraints and attributes. It tries to find a backup path that is identical to the primary path with respect to bandwidth, affinities, priority, and so on.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-PCIE_BAD_READ_ADDR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: CIB PCIe bad read address), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_CRASH_JID
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-2-SESSION_COUNT
### Response:
(Severity: 2), (Category: SECURITY), (Description: Attempted to decrement session count which is already zero after a SSH session has been terminated.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-EVENT_MANAGER_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Event manager could fail if system resources (eg: memory) is not sufficiently available for use.), (Recommended Action: If it is related to process-level resources, restarting the concerned process might solve the issue. If the message recurs, issue the command 'show mgmt-plane trace client <clientname> both' to gather data and provide the gathered information and the exact error message as it appears, to the Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-2-TEMP_OVER_LIMIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar driver detected that the current ASIC temperature is over threshold.), (Recommended Action: Please check card inlet and hotspot temperature sensor readings and fan speed using command 'show environment temperatures' and 'show environment fans'. Ensure all empty slots are populated with latest filler cards and chassis ambient temperature is within documented limits. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRMS-3-IPC_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An IPC transport software error occurred. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Restart SRMS process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-ERR_MSG_GET_SCOID
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPF failed to retrieve its local connection ID for a client attached to the specified channel. This is an internal programming error.), (Recommended Action: Restart the OSPF process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Entity specified in the messages is removed from the chassis and inventory manager is updated.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_LNK_FAULT_ERROR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the XFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do XFP OIR. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_1_OFLOW_FIA2BR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-1 FIA to bridge instance-0 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_1_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A fatal error was encountered during initialization.), (Recommended Action: If the process does not restart automatically then try manually restarting it. A likely cause for this error is that the system has run out of memory. If this is not an out-of-memory problem and restarting the process does not solve it then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-INSUFFICIENT_PATH_BUFFER
### Response:
(Severity: 3), (Category: ROUTING), (Description: During copy path operation, the destination path buffer seems to have insufficient space to copy entire source path (including path info & path TLVs). Due to this the destination path will have incomplete information and may result into functionality issues.), (Recommended Action: Bring the BGP session down for the affected neighbor.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-MVUDRV_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: Marvell user level device driver initialization failed. This is a fatal fault since ESD would not receive hotplug events thereafter. ESD process will restart after this fatal error.), (Recommended Action: If this problem does not recur, no intervention is required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-CALIBRATION_DATA_PARSE_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Linecard device calibration data parsing failed. It is applicable for Digi 20x10g and 2x100g Digi cpak cards.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_QAD_EGRESS_QUEUE_MISSING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to find the qad queue for egress packets. This could causes applications using this qad queue not sending out packet %s - QAD queue name %s - thread name), (Recommended Action: Reload the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-ERR_SYSDB_STRING_ENCODE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Sysdb path has string that has special character without sysdb_encode flag'), (Recommended Action: Collect the following details: 1. Command issued 2. show parser trace. 3. console logs. 4. If config is restored from file, then filename/contents. 5.If command failed at startup, show config trace and show config failed startup.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_LCPM_SHOW-3-SYSDB_IM_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: sip-pm show encountered trouble in sysdb operations, im control server bind or imc interface get operations), (Recommended Action: Please enable 'debug im api errors', 'debug sysdb access ...' and capture the output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show ospf mpls traffic-eng' command in IOS XR?
### Response:
The 'show ospf mpls traffic-eng' command is used to display information about how OSPF is interacting with MPLS TE. It shows the OSPF process ID, the area ID, the router ID, and the MPLS TE router ID. It also shows the MPLS TE link information that OSPF is advertising. This command is useful for verifying the integration between OSPF and MPLS TE.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'l2vpn bridge group' command in IOS XR?
### Response:
The 'l2vpn bridge group' command is used to configure a point-to-multipoint Layer 2 VPN (L2VPN) service, also known as Virtual Private LAN Service (VPLS). It creates a virtual bridge domain that connects multiple sites as if they were on the same LAN. The 'bridge group' command defines the VPLS instance and its associated parameters.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-FILE_CLOSE_FAIL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the loadpath infrastructure is behaving incorrectly. A file involved in the current request or operation could not be closed. This will not affect the current operation, but subsequent operations may be affected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ASIC_RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: The asic device failed due to the above mentioned error. The device is being reset to recover from failure), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP if the asic is continuously reset and recovery does not take place after device reset: 1. 'show processes npu_driver location <loc>' 2. Collect all ltraces: 'show controllers npu trace all location <loc>' 3. dmesg and /var/log/messages from host and XR VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-NO_OP_BUFFER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: There is no buffer available for the operation request.), (Recommended Action: Please collect output of the following commands: show platform show install active show log show process blocked location <> show process <process_name> location <> follow process <process_PID> iter 5 delay 2 location <> show controller rm prm client trace <process name> info location <> show controller rm prm client trace <process name> error location <> show controller rm prm process <process name> location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-2-FABRIC_PING_NOT_OK
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Need to print the console messagess when the fabric ping to particular node occurs.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-UNKNOWN_FAB_DEST
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Destination card type is invalid although the plane is available. Traffic is being disabled to this. This might happen if the destination is down or has been removed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_PORT_0_OUTPUT_SQUELCHED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in 2MHz and 6.312MHz modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-4-WARNING_CACHE_LIMIT_HIT
### Response:
(Severity: 4), (Category: IP), (Description: An attempt was made to exceed the configured IPv6 Neighbor Discovery (ND) entry limit for this interface. This condition is reported only once for every 1000 attempts (hits).), (Recommended Action: Configure a larger cache limit on the interface. In interface configuration mode, use the command <CmdBold>ipv6 nd cache-limit<noCmdBold>. To help estimate an appropriate value, use the commands: <CmdBold>show ipv6 interface <interface-name><noCmdBold> <CmdBold>show ipv6 neighbor <interface-name><noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-CORRUPT_HEAP
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_HDR_EXT_FIFO_OFLOW_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg hdr ext fifo overflow on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOMAHAWK-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational Tomahawk RP Kensho-JF CPU Subsystem DLL message.), (Recommended Action: Nothing. Reporting normal progress of Tomahawk RP Kensho-JF CPU Subsystem DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-7-PSOC_UPGRADE_IN_PROGRESS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is an informational message indicating that PSOC firmware upgrade is in progress on the specified location. The line that is being presently upgraded is mentioned in the message. This line number would be in the specified range, corresponding to the PSOC that is being upgraded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-PACKET_DECODE_UNEXPECTED_TLV
### Response:
(Severity: 4), (Category: L2), (Description: A packet containing an unexpected TLV was received on the given interface. The packet has been processed normally and the unexpected TLV has been ignored. This message indicates that the device from which this packet originated is creating packets which deviate from the expected format of packets of this type according to the IEEE specification (IEEE 802.1ag-2007 or ITU-T Y.1731 02/2008). While the message is harmless, the user may wish to check the standards compliance of the remote device, which is indicated by the provided source MAC address.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-2-TAKING_NODE_DOWN
### Response:
(Severity: 2), (Category: FABRIC), (Description: CCSQ DLL encountered an fatal error mentioned above. The driver triggers MSC node-down to recover from the error.), (Recommended Action: This might be a recovery action from a fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-ERR_LIST_CREATE
### Response:
(Severity: 3), (Category: L2), (Description: The list here refers to the ifhandle list or the idb list for the bundle or its members. Also, it could be the STATE change list as well for IM. The argument shows up the type of list which was failing to get created.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. This shows a low memory condition on the node. Try to reduce the amount of memory being consumed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_BURN_LANE_REPAIR_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the SBUS Driver to indicate that the burn lane repair operation has failed on the specified HBM memory), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialization of trace functionality for config failed. This would affect the debugging of config shell.), (Recommended Action: Retype the command to do config operation again. If the message appears again, copy and save the message. Collect show logging output and any other suspicious error messages on console and inform technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-OPEN_EVENT_CONN
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to open a event connection. The message would appear during initialization of DNS process (i.e. domain_services) when it is trying to create sysdb connection. Such errors are not expected and should go away with proc restart domain_services), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-WRONG_PIE_LOADER
### Response:
(Severity: 7), (Category: INSTALL), (Description: The PIE file was passed to the wrong loader function. The current request or operation will not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_MKDIR
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not create a required directory, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_DRIVER-7-TOO_LONG_DEVICE_NAME
### Response:
(Severity: 7), (Category: OS), (Description: Too long device name is specified), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can BGP prefixes be originated using the network statement?
### Response:
The network statement is used to advertise a prefix if it exists in the routing table. The mask of the network statement must match the mask in the routing table. The route must be in the routing table before BGP will originate it.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-3-FIELD_DEPEND_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The PMF dependency ordering is incorrect for the groups configured.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-MCAST
### Response:
(Severity: 3), (Category: ROUTING), (Description: The above specified multicast operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-NO_MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: Not enough memory available in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the top memory users can be identified to be the memory leak source, try process restart the top memory user processes to recover the condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APIV-3-SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal software error has occurred for the specified APIV module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'send-community-ebgp' and 'send-extended-community-ebgp' commands in IOS XR BGP configuration?
### Response:
By default, BGP does not send community or extended community attributes to eBGP neighbors. The 'send-community-ebgp' and 'send-extended-community-ebgp' commands enable sending these attributes to eBGP neighbors. This is necessary when you want to carry community information across AS boundaries, for example, for implementing BGP RTBH filtering.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_5
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-4-FAB_BUILDUP
### Response:
(Severity: 4), (Category: OS), (Description: GSP fabric queue buildup indicates underlying transportor hardware issue), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-BAD_PUNT_NODE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A NetIO feature DLL has attempted to pass a bad chain node to a NetIO packet punt API. The packet has been dropped.), (Recommended Action: Identify the NetIO DLL that is passing the bad node, and contact the owners Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_VERIFY-6-ERROR
### Response:
(Severity: 6), (Category: QOS), (Description: The QoS EA policy verification encountered the specified error. This may happen because the QoS policy is invalid and cannot be applied successfully.), (Recommended Action: Check the output of 'show config failed' and correct the qos policy appropriately.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-3-ERR_ECM_REG
### Response:
(Severity: 3), (Category: L2), (Description: ASIC Error library encountered an error while setting up a SYSDB notofication handler with the event connection manager.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-CHASSIS_IN_MIGRATION_MODE
### Response:
(Severity: 4), (Category: DRIVER), (Description: Normally chassis should either be in 1T or 2T fabric mode. Meaning all cards ex: fan trays, fabric cards, LCs should be compatible with the current mode. Migration mode is when one is migrating from either 2T to 1T or vice versa. In this case a mix of Fabric cards (ie 1T FCs and 2T FCs) is allowed while cards are being swapped out. Note that all FCs must be of the same type to exit migration mode. New 2T LC insertions are not allowed during migration (must transition to 2T fabric mode).), (Recommended Action: Complete migration ie swapping out all FCs to either 2T or 1T FCs ASAP. Although 1T can work with a mix of 2T FC and 1T FCs it is not recommended to remain in this mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-4-LTRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: ltrace initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-7-ERR_SYSDB_FD
### Response:
(Severity: 7), (Category: SECURITY), (Description: Error encountered while using the System Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-PROTGRP_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Adding ECMP failed due to Protection Groups OOR .), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-SW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The operation is failed due to an internal software error. %d - instance. %s - description of the operation. %s - description of the error.), (Recommended Action: Check if the linecard reported any other errors. May need to restart process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-SEND_MSG_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message indicates message failure from server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-EVENT_CONN_ERROR
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: Could not connect to event connection manager.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-4-OPD_ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified received Optical Power Degradation Alarm has been declared or released. interface: interface on which alarm is set/cleared alarm: alarm being asserted i.e. RX-OPD status: set/cleared), (Recommended Action: If alarm is seen: Link quality degraded beyond configured threshold. Check if the cable is faulty.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-3-BTREE_RESET_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to reset btree shared memory function ptr. This is a software programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-2-SWP_REVERTED
### Response:
(Severity: 2), (Category: INFRA), (Description: When system(node) reloads without commit, committed swp is copied to active swp. This gets displayed when user expliciitly reloads without commit or when the system reloads silently after a reload.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-FINGERPRINT_CACHE_CHANGED
### Response:
(Severity: 4), (Category: INFRA), (Description: The file that is used to cache the run time fingerprint information has been modified. This may be as a result of an attempt to falsify the run time fingerprint information, to cover up malicious changes to installed software. Fingerprint cache regeneration is being scheduled.), (Recommended Action: Ensure that only authorized people have access to the router. Wait for the cache generation status returned from yang with the active/committed packages to indicate that cache generation is up to date, at which point the results active/committed packages data can be relied on again. This may take at least 5 minutes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-6-ERR_ASIC_RESET_DEFERRAL
### Response:
(Severity: 6), (Category: FABRIC), (Description: The annunciated error occurred relating to asic deferral.), (Recommended Action: In one of the persistent storage devices (harddisk:/, disk0: etc.) on the DSC's RP that was active at the time the message was emitted, a file may have been created under a directory called asic_snapshots/ for this occurrence. The name is of the format 'sponge_debug_snapshot.node<rack>_<slog>_CPU0.<[first/latest]>' Collect that file if present and save it to the case.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_IO-3-FIB_BIND_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The IPv4 EA thread could not bind to FIB due to the mentioned error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check with fib_mgr process(PI FIB) on the reason of failure to bind to FIB.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth underflow feature?
### Response:
The MPLS TE auto-bandwidth underflow feature allows auto-bandwidth to react more quickly to drops in traffic flow by triggering an immediate bandwidth adjustment when the measured rate drops below a configured underflow threshold. It aims to free up bandwidth on the tunnel path more promptly when traffic decreases significantly.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-ACP_DIKE_TO_NBR_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'Autonomic Network Control plane - Failed to create DIKE ' 'tunnel to neighbor'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-INFO_LOG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_SYSDB_DATALIST_FREE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLCDLL-3-ERR_TRACE_REGISTER
### Response:
(Severity: 3), (Category: L2), (Description: An attempt to register with the tracing infrastructure failed. This will mean that tracing for the cHDLC Netio DLLs will not be available.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP session protection feature?
### Response:
The MPLS LDP session protection feature provides a means to protect an LDP session between directly connected neighbors in the event of an interface failure. It uses a targeted hello adjacency as a backup to maintain the session. It is enabled with the mpls ldp session protection command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-7-LINK_STATUS_CHANGE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The DMAC link state changed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-5-PEC_PECINSERTED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The expansion card is inserted.), (Recommended Action: None,informational purpose only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-AIS_EXPIRY_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while restarting the AIS expiry timer for the local MEP specified in the error message. This could cause a received AIS or LCK signal to be incorrectly reported as having stopped.), (Recommended Action: If the error persists and the local MEP continually reports the received signal as starting and stopping, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-IO_MNT_ROMMON_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to initialize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-3-SYSDB_BAG_DECODE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The system is attempting to process a policy object set or named policy and cannot decode the object.), (Recommended Action: Look for out of resource conditions. If memory is low, then restart the policy_repository process and reapply the configuration. Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink_CLNT-3-INVALID_ARG
### Response:
(Severity: 3), (Category: L2), (Description: Cannot retrieve bundle info as Invalid arguement was passed in function.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMHAC-7-ERR_DLL_INIT
### Response:
(Severity: 7), (Category: OS), (Description: The Platform Manager HA DLL encountered an internal software error. The debugging services could not be initialized. This problem should rarely happen. Restarting the Platform Manager HA process might recover the problem), (Recommended Action: There is no action required because the client process should handle this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-DEBUG_QSM
### Response:
(Severity: 7), (Category: OS), (Description: debug print before qsm_stat), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-SERVER_INIT_DEBUG_FAILED
### Response:
(Severity: 5), (Category: OS), (Description: 'Debug utility registration failed.' 'Debug functionality may not work properly.' 'IMDR will proceed without fail.'), (Recommended Action: 'Restarting the process may resolve the issue.' 'If the problem persists after some tries, contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ZERO_LEVEL
### Response:
(Severity: 3), (Category: OS), (Description: No level started placeable processes found in the table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_SHUTDOWN
### Response:
(Severity: 6), (Category: SECURITY), (Description: System shutdown.), (Recommended Action: 'NO ACTION')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM_TEST-6-UPDATE_ERR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: hfr_pm test encountered an error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: This is just test software which the customer does not get. so there is no actiom required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-EVENT_MGR_CE_TFTP
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process exited due to specified reason mentioned in the message related to the event handler to handle the notification event from the EthServer when a new packet arrives.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-FAILED_INIT_LTRACE
### Response:
(Severity: 7), (Category: INSTALL), (Description: The install notification library was unable to initialise the trace buffer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE_CLIENT-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: Internal Warning.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-INVALID_ABS_SID
### Response:
(Severity: 4), (Category: ROUTING), (Description: When prefix SID value is configured as absolute label value, it should be within the SR Global Block configured on the router (default 16000-23999). The prefix SID will not be used until this config inconsistency is resolved.), (Recommended Action: Fix the configuration such that the absolute SID value lies within SRGB. Ignore if this is already done and warning will repeat until this is fixed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-LTRACE_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ltrace initialization failed), (Recommended Action: If continuous, contact tech-support Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMS_FILE_OPEN
### Response:
(Severity: 7), (Category: HA), (Description: Failed to open the given file due to some internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFV3_POLICY-3-ORA_INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-SKIPPED_REPARTITION_EUSB
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Some existing eUSB may have wrong FS or partitions. Check if need to reformat the eUSB. This message will get printed if eUSB is unable to repartition and prints with skipping repartition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-MSGQ_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: Message Q operation failed.), (Recommended Action: Restart process 'cgn_ma'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_SHOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, show fail error information), (Recommended Action: This is a warning that some information is missing from the output of the show command.PLease collect the show command, console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-6-SYSDB_BLOCK_SERVICE
### Response:
(Severity: 6), (Category: OS), (Description: SSM process detects sysdb service is not available.), (Recommended Action: Collect system log information for the sysdb. Collect show tech sysdb, show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM_TEST-6-RCVD_UPDATE
### Response:
(Severity: 6), (Category: IP), (Description: Update received), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA-5-WARN_INSUF_MAC
### Response:
(Severity: 5), (Category: L2), (Description: A client has request more MAC addresses than the MAC allocation process can provide.), (Recommended Action: If the pool is exhausted and MAC address configuraion is allowed, configure more MAC addresses. Otherwise reduce scale.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-4-SR_POL_REQ_POL_TYPE_MISMATCH
### Response:
(Severity: 4), (Category: OS), (Description: Policy has different type (per-flow or per-destination) than the new candidate-path type add request. Therefore, the new request will be dropped. If it is required to change the type, the policy should be removed completely before the type is changed.), (Recommended Action: Correct the configuration so all candidate-paths have same policy type (i.e. per-flow or per-destination). If it is required to change the policy type, remove the policy completely and then add candidate-paths of the other type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_BQS-6-SRTMEMLOW_CLEAR
### Response:
(Severity: 6), (Category: L2), (Description: CPP BQS HW schedule resources have recovered from critical threshold.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_DMA
### Response:
(Severity: 3), (Category: FABRIC), (Description: A hardware error occurred while a DMA transfer initiated by the FQM process was taking place. This means certain data requested by the FQM process will not be available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_FREE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while freeing FGID - exceeds max number of tries for freeing FGID - number of fgid passed exceeds set limit dues to message size limit), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-ECM_FAILURE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: During the set up of the connection to fabric server, one of the calls failed. This is considered a critical failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_1_PKT_MAXLEN_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on FIA to NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-4-ABORT_CLEANUP_TIMEOUT
### Response:
(Severity: 4), (Category: INSTALL), (Description: ISSU Director did not recieve a notification from ISSU Manager indicating abort cleanup was successful. ISSU Director has made a best effort attempt to clean up any stale system resources and terminate any stale ISSU Manager processes.), (Recommended Action: Verify that the software nodes are in the correct state by running 'show platform' and that there are no stale virtual machines. Otherwise contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered the specified error during the initialization sequence. This facility is deemed crucial and hence the process is automatically restarted on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Forwarder encountered a memory allocation failure error), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-PLATFORM_MANAGER_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is typically an internal error in the software. The software failed to create the interface on the engine..), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea. If the problem persists, copy the error message as it appears on the console and any noticeable side effects. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MEMBER_COMPATIBILITY
### Response:
(Severity: 6), (Category: L2), (Description: A configuration change has meant that a link is now incompatible (or compatible) with the other members of the bundle, or the bundle is operating in a mode that is incompatible with the member's configuration. The reason for the incompatibility at the time of raising the alarm is supplied in the message.), (Recommended Action: No action is required; however, any link that is incompatible will not be used in the bundle. In order to make the link compatible, refer to the reason given in the message. Check the configured mode of operation (LACP active/passive or disabled, i.e. mode 'on') and bandwidth of all the links within the bundle or the bundle configuration to resolve the incompatibility.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-RX_CH_LO_PWR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low power on a channel. This is a precursor to Rx LOS errors in the channel. The link is now marginal, and the superstar Rx link may be seeing correctable errors. Although the link is still working, it is marginal and can become inoperational in due course. This is also likely due to contaminates in the optical cable and/or connector. Please check if the optical cable and/or connector are secured, and clean the components as necessary.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_LIB-7-SERIAL_BAUDRATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Display the serial baud rate value.), (Recommended Action: Debug message only. No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-MSG_REPLY_ERR
### Response:
(Severity: 3), (Category: OS), (Description: msg_reply() failed to send the reply.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-MUTEX_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-PWR_EXCEEDED_SHUTDOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: the power budget enforcement progressive configuration is enabled in the router and the current power usage exceeds the configured threshold. Hence the least priority is being shutdown.), (Recommended Action: Ensure that sufficient power is available. Reload the affected card to bring it up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the main components of RPL on IOS-XR?
### Response:
The main components of RPL on IOS-XR are\n- Policies - Contain a series of statements to evaluate routes and apply actions\n- Sets - Groups of elements like prefixes, AS paths, communities that can be referenced in policies\n- AS path sets - Define AS path filters\n- Community sets - Define community filters\n- Prefix sets - Define prefix filters\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-DEBUG_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: PLIM process encountered a software initialization error. LC will not work due to this error .), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. There was problem with hardware or software initialization. This problem can be resolved by reloading the LC 'hw-module location <> reload'. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-1-NP_RESET_FAIL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This message indicates that NP is not out of reset successfully, this would affect the traffic on the interfaces that belongs to this slice.), (Recommended Action: Collect 'show tech-support ethernet interfaces' for further analysis)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_LOCAL-3-INVALID_PROC_ID
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The process was unable to get a valid local interface process ID from the environment and so is not able to instantiate the correct local interface owner processes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-DUP_TABLE
### Response:
(Severity: 7), (Category: HA), (Description: During registration, two copies of a table were found in the CDM store at the same version. This indicates corruption in the CDM store.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPABRG-6-HW_INFO1
### Response:
(Severity: 6), (Category: L2), (Description: Marmot spabrg driver informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-7-COMMON_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The CAI C2C I-lite library encountered an error related to memory or data value.An error would be reported to the client application which should handle this condition appropriately.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP for MPLS-TE tunnels in Cisco IOS XR?
### Response:
To configure RSVP for MPLS-TE tunnels, use the 'mpls traffic-eng tunnels' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng tunnels
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_PWHE-3-EA_STATE
### Response:
(Severity: 3), (Category: L2), (Description: The PWHE EA process failed to update the state of a tunnel interface.), (Recommended Action: Collect debugging information, shut/no-shut tunnel interface. If the above action doesn't fix the problem, remove tunnel interface, re-create tunnel interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering autoroute feature?
### Response:
The MPLS traffic engineering autoroute feature allows IGP routes to be automatically routed over MPLS TE tunnels. This provides IGP shortcuts using the TE tunnels. Autoroute can be announced globally for all tunnels or on a per-tunnel basis. It is enabled with the tunnel mpls traffic-eng autoroute announce command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-EVMGR_API_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-4-CRS_X_MSC_UNKNOWN_SW_REV
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The line card FPGA is reporting a different software revision.), (Recommended Action: Upgrade FPDs using upgrade hw-module FPD command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-6-INFO_INOTIFY_GENERAL
### Response:
(Severity: 6), (Category: MGBL), (Description: mirror common libs general inotify info. This is probably not an issue, but you can run `show mirror` to verify.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFD_HELPER-2-CRITICAL_ERROR
### Response:
(Severity: 2), (Category: MGBL), (Description: A critical error was encountered. The failure of this can be critical to general system operation. If the same error is seen more than 5 times, contact Cisco TAC support because a reboot of the node may be required.), (Recommended Action: Provide the message details to Cisco Support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-6-CLIENT_ACTIVITY
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Fault Raised), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-UNSUPPORTED_OPTICS
### Response:
(Severity: 6), (Category: L2), (Description: The SFPPLUS optics inserted in the given port is not supported on this PLIM.), (Recommended Action: Verify the SFP+ is supported in the topaz plim installation manuals. Replace this optics with a Cisco supported optics.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-6-TEST_CLIENT_ERROR_TC
### Response:
(Severity: 6), (Category: OS), (Description: Status information while enabling test client to exercise the error test cases.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-4-ASIC_ERR_BACKUP
### Response:
(Severity: 4), (Category: FABRIC), (Description: Report failures from asic_error backup triggered during card bringdown.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What load balancing options are available for MPLS traffic in Cisco IOS XR?
### Response:
Cisco IOS XR supports several load balancing options for MPLS traffic: 1) Per-destination load balancing (default) where packets for a given FEC are always forwarded over the same path. 2) Per-packet load balancing where successive packets for a given FEC may take different paths. 3) Flow-aware load balancing (FAT) where packets belonging to the same flow are always sent over the same path.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'update-limit' command in IOS XR BGP configuration?
### Response:
The 'update-limit' command allows limiting the number of prefixes that can be received from a BGP neighbor within a specified time interval. If the limit is exceeded, the BGP session is torn down. This provides protection against a misconfigured or malicious BGP neighbor that sends an excessive number of prefixes, which could consume all the memory on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_LTRACE_BUFFER
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while accessing a tracing buffer. This may be due to resource starvation or an internal software programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: This is an init error. The system should have taken the actions to recover itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-6-TCP_FAIL
### Response:
(Severity: 6), (Category: MGBL), (Description: TCP accept call failed, the HTTP server can't function.), (Recommended Action: No action is required. The server will automatically restart)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-6-WARNING_WRAPPER
### Response:
(Severity: 6), (Category: ROUTING), (Description: A function call failed unexpectedly - this is probably a system problem), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-7-ERR_CLIENT_FAULT
### Response:
(Severity: 7), (Category: ROUTING), (Description: Client error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mini' composite PIE (e.g., comp-hfr-mini.pie-3.6.0)?
### Response:
The 'mini' composite PIE is used for upgrading an already running IOS XR system. It includes all the packages contained in the IOS XR Unicast Routing Core Bundle. Installing and activating the mini PIE upgrades the router to a new IOS XR version.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISKUTIL-3-INIT_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: An unexpected initialization error condition encountered. System backup utility may not work properly), (Recommended Action: Collect system log information. Do not run system backup utility. Check storage media to see whether they are accessible. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-ID_INVALID
### Response:
(Severity: 7), (Category: OS), (Description: Invalid client_id is created.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSLIB-6-INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: An informational message for user.), (Recommended Action: No action required - these are messages for information only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-INVALID_INI
### Response:
(Severity: 3), (Category: INFRA), (Description: Ini file found is invalid.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify an L2VPN VPLS bridge domain?
### Response:
To verify the status of an L2VPN VPLS bridge domain, use the 'show l2vpn vfi' command. show l2vpn vfi
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-MAP_SERVER_SITE_EID_PREFIX_LIMIT_CONFIG
### Response:
(Severity: 4), (Category: IP), (Description: 'The newly configured limit is less than the current ' 'EID prefix count.'), (Recommended Action: 'Issue \'clear lisp site\' for limit to take effect.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-NEGATIVE_CURRENT_COUNT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Tunnel count has been decremented till it became negative. process tunnel_infra will restart to recover from the situation.), (Recommended Action: Ideally this should never happen and points to a serious bug in pfi/tunnel/infra File a tracking DDTS if it happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_7_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN-4-AUTHEN_FAILED
### Response:
(Severity: 4), (Category: SECURITY), (Description: This is an error message from debug module of aaa component. This might have been caused by 1. Entering wrong username/password. 2. The user is not configured on the box and hence can not login.), (Recommended Action: Please check for the correctness of username/password)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_ACTIVATE
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the activation of the process. Activation occurs when the card transitions to ACTIVE state. This error resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-SHIP_REG_ERROR_COUNTERS_FAILED
### Response:
(Severity: 5), (Category: OS), (Description: 'Ship registration for error counters failed.' 'Ship functionality may not work properly.' 'IMDR will proceed without fail.'), (Recommended Action: 'Restarting the process may resolve the issue.' 'If the problem persists after some tries, contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_RA_INTR_VQI_DEQ_QERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_RA_INTR_VQI_DEQ_QERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROMMON_BURNER-5-version
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Invalid ROMMON version to RP console.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_THREAD_ATTRIBUTE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while setting the thread attribute during the process initialization sequence. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-NSR_NII_BRINGUP
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred while IS-IS bringup NII intf and it's timer on the interface not running.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-RECORD_TYPE_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: A feature record has different type with current software.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_SHUTDOWN
### Response:
(Severity: 3), (Category: SECURITY), (Description: System shutdown.), (Recommended Action: 'SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-FAILED_CLEANUP
### Response:
(Severity: 3), (Category: SECURITY), (Description: tamsvcs process failed to cleanup the hybrid tam DB.), (Recommended Action: 1) show tech-support tam 2) process shutdown tamsvcs_tamm location <node> 3) Move/Remove the tam DB as follows eXR/Lindt: /misc/config/SWTamRoot cXR:/disk0:/SWTamRoot 4) process start tamsvcs_tamm location <node> Data objects created earlier in TAM-DB will be lost and TAM will start with fresh DB. if any application have created objects then those application have to re-create it again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-7-BADPATH
### Response:
(Severity: 7), (Category: MEDIA), (Description: Could not attach pathname), (Recommended Action: Reboot the router if possible. If not try to start it from the command line. If that too fails Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-PTHREAD_CREATE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while creating shim partner thread.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-IFH_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Service Platform Manager encountered an provisioning info.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-DEBUG_STAT_HEX
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-PTHREAD_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed in a pthread function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTU0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_SEQ_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 0 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-4-MLAN_COUNTER_OVFL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A runtime failure occurred in Ether-Ctrl process. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code.), (Recommended Action: Collect console log and the following information. - sh platform - sh install summary - sh controller mlan port-counter <> location <> - sh controller mgmteth <> location <> stats - sh interface mgmteth <> location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-6-IPACCESSLOGS
### Response:
(Severity: 6), (Category: ACL), (Description: A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option and matches with the access-list that is used by routing protocols. This message is seen for the first match and for each match after the hit count is greater than 0x7FFFFFFF(2147483647).), (Recommended Action: This is information only message, no action required No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-HW_TX_RFD_EMPTY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects TX_RFD_EMPTY and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDSUTILS-3-RING_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Failed to initialize the ring.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-MGR_L2TP_SESSION_ID_SPACE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: L2TP session id space configuration is incompatible in the system. This may prevent new sessions from coming up . Also , existing sessions may be affected.), (Recommended Action: Please configure 'no l2tp session id space hierarchical')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-WARN_SYSDB_EDM_REG
### Response:
(Severity: 4), (Category: SNMP), (Description: Failed to register as EDM. The access to SNMP statistics and MIB information through 'show snmp' CLI command will not be available. This is likely due to an internal software error.), (Recommended Action: Restart snmpd process.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_BFD_UP
### Response:
(Severity: 5), (Category: ROUTING), (Description: The BFD session for the specified interface destination came up. \ The first argument is the tunnel name. The the second argument is \ the signalled name, and the last argument is the Sub-LSP destination. \), (Recommended Action: None. This is a solicited message (by 'logging events bfd-status' \ configuration under tunnel interface) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX-2-VER_TRANSLATE_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There was an fail during translate of the platform version. Plaform info version may not be same as the driver, the error message has detailed information. Version translate fail will usually result in process restart in an attempt to translate the correct platform version.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-CARD_PCI_NTB_SWITCHOVER_DONE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Card PCI Non-Transparent Bridge Switchover operation is completed without any error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-API_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'An API failed due to the mentioned error'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_3_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-3-ERR_TX_PKT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CCI HAL SATORI Packet transmit error.), (Recommended Action: Execute spp_pdma_show_ltrace from the kshell of the card where this message was seen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSPI_DIP4_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RxSPI DIP4 error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-6-UNKNOWN
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: A VPDN session has been terminated. The category of the termination event is unknown), (Recommended Action: Please examine the human-readable error message that appears in the log and conduct the first level of troubleshooting based on the info in the message. If the root cause is still not clear, collect the required info and forward it to technical support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_CDM
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error using the CDM Service. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-CLIENT_ERR
### Response:
(Severity: 7), (Category: MEDIA), (Description: Failed function call.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_EDM-3-LIST_ADD_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_HBLOSS_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being reset because it failed to detect heartbeat pulses. Debug information would have been collected before the reset operation and then saved under harddisk:/shelfmgr_debug directory (debug files collected for each node will be created under its own subdirectory) after the node recovers from the failure. Also crashinfo and core file would have been created as part of the reset opeartion under harddisk:/.), (Recommended Action: Collect heartbeat loss debug files of the affected node from the harddisk:/shelfmgr_debug directory and the associated crashinfo and core file befre contacting Cisco for technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-SRP_NR_CLIENT_UNREG
### Response:
(Severity: 4), (Category: HA), (Description: An unexpected error condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_HW_OFFLOAD-2-NO_MEMORY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Unable to get shared memory window info), (Recommended Action: Provide the following log: Collect console logs and output of - show memory summary location <> - show shmwin summary location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-GET
### Response:
(Severity: 7), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the object to fetch does not exist. The details are in the error string.), (Recommended Action: Check that the requested object exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT1_EOC
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP EOC error on the HT1 interface. HT0 EOC Error indicates that a packet has arrived to be sent on the HT link but the link is not active.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-FLASH_SELECT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured while trying to get ROM selection info.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key preparation steps needed before installing IOS XR?
### Response:
Some of the key preparation steps needed before installing IOS XR include: identifying the desired IOS XR release version and optional packages, determining mandatory SMUs, checking hardware compliance and memory requirements, preparing the boot device, and setting up network connectivity to the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CDR_REG_NOTIF_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric:CDR driver failed to register for notification from shelf-manager. Please check with shelf-mgr team.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-6-OPEN
### Response:
(Severity: 6), (Category: SECURITY), (Description: This is an info message from debug module of aaa component. This indicates that user has succesfully authenticated.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-7-ERR_DMA
### Response:
(Severity: 7), (Category: FABRIC), (Description: An error occurred while a DMA transfer initiated by the FQM process was taking place. This means certain data requested by the FQM process will not be available.), (Recommended Action: If the issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFLOW-6-INFO_BUFFER_SIZE_EXCEEDED
### Response:
(Severity: 6), (Category: MGBL), (Description: This is an informational message to indicate that the specified flow monitor map buffer has been exceeded. This buffer is used to transiently keep sFlow records in memory.), (Recommended Action: If this message is being issued too often, you might consider increasing the export rate of the monitor map by the command 'cache timeout rate-limit'. The rate-limit is in use to smoothen out transient surge in traffic. If the message is seen less frequently, you may consider increasing buffer size to hold more entries by 'cache entries' command. Note that the maximum cache size is 1,000,000 entries and it may put a strain on memory consumption in the LC. If these measures are not effective, consider lowering the sampling rates.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ANR_WHITELIST_CONFIG
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'The autonomic registeration authority has been ' 'configured with white list and will allow only ' 'these devices to enter its network'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC-6-L6
### Response:
(Severity: 6), (Category: SERVICES), (Description: Log level in sbc app is set to higher than 40 and less than 50. This is an info message.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_OUTPUT-3-ERR_MAIN_QUEUE
### Response:
(Severity: 3), (Category: IP), (Description: The FHRP Output process failed to queue an event to the Main thread. If possible then the FHRP Output process will attempt to recover and retry. Clients of the FHRP output process (such as HSRP and VRRP) will observe inconsistent behavior until this is resolved.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-HW_GASPP_READ_BUS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The user may have entered an invalid address, or else there is a HW problem.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-3-ASSERT_INFO
### Response:
(Severity: 3), (Category: ROUTING), (Description: Provides information about the assert in RCMD.), (Recommended Action: Report to Technical Support. This provides information about the assert occured in RCMD process. Please take technical support assistance to verify that RCMD process has been removed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_LIB_ACCESS-3-SERVER_CONNECT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and server, perhaps because the communications infrastructure is not yet up. The MBI operation in progress will not be carried out.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-4-ERR_THREAD_CREATE
### Response:
(Severity: 4), (Category: L2), (Description: MFR MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-ISSU_SUPPORT
### Response:
(Severity: 4), (Category: ROUTING), (Description: ISSU in EIGRP works on top of NSF and GR. If NSF is disabled, during ISSU, EIGRP will not be able to retain the routes learnt from its peers and may result in traffic loss.), (Recommended Action: If routes learnt by EIGRP needs to be retained during ISSU, enable NSF using \'no nsf disable\'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-LRD_DLRSC_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The verifier application would need to listen to LRd events to figure out if it is running on a dlrsc The error refers to processes not running on the dLRSC %s - process name %s - error/warning condition), (Recommended Action: Try for process restart If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_3_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-FANTRAY_COMM_CLEAR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: System SW communication with fan tray re-established.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-CALLBACK_WRONG_THREAD
### Response:
(Severity: 3), (Category: OS), (Description: A callback from the IOX-XR infrastructure was not handled by the PCE process because it was received in the wrong thread. The PCE process may now be in an inconsistent state with the rest of the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The pce_server process may be restarted in order to recover from this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-READ_TX_RX_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a timeout on some bus), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_RD_RECONSTRUCT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The RD value for the VRF failed to be reconstructed after RPFO.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-UNSUPPORTED_IFTYPE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The interface name does not correspond to a supported XR interface type, i.e. MgmtEther or GigabitEthernet.), (Recommended Action: Check the type of XR interfaces in the XR_INTERFACES environment variable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-AGENT_READY
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Agent is initialized and ready for use.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-PLAT_DB_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to query platform data base.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-FXC_LOCAL_SWITCHING
### Response:
(Severity: 3), (Category: L2), (Description: For an EVPN VPWS flexible xconnect (FXC), the calculated Ethernet tag may be used by at most two Access Circuits(AC) to setup AC-AC Local Switching. It is impossible to Local-Switch more than 3 ACs. The same set of rewrite tags to enable Local switching was configured on more than two Access Circuits in the same FXC. Up to two identical Ethertag rewrites are supported in the FXC/EVI on different interfaces, 3 (or more) is unsupported. The Ethernet tag is derived from the interface encapsulation and rewrite tags.), (Recommended Action: Modify the encapsulation/rewrite tag for current interface so the calculated Ethernet tag is used at most twice per FXC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_SYSDB_DATALIST
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEV_EUSB1_NOT_RESPONDING
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EUSB1 device not responding), (Recommended Action: Please attempt the following: If dual RSP, and the problem is on the active RSP, issue 'redundancy switchover' If the problem is on the standby/simplex RSP: Restart low level usb driver via ksh, 'kill io-usb_pid' Failing which, Restart usbstack 'process restart umass-enum' Failing which, Reload RSP If problem persistes, replace EUSB devices If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-EDM_REG_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to register as a SysDB EDM.), (Recommended Action: Please include the output of the following commands: - show tech-support lpts - show tech-support sysdb - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel load-share feature?
### Response:
The MPLS TE tunnel load-share feature allows the control of how traffic is load-balanced between two or more parallel TE tunnels to the same destination. By default, load-balancing is based on a hash of the packet header fields. Optionally, the load-share value can be specified manually to control the proportion of traffic to each tunnel.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-6-INFO_DNS_HOSTNAME
### Response:
(Severity: 6), (Category: MGBL), (Description: 'Time delay due to DNS server not reachable.'), (Recommended Action: parsing is taking a long time - DNS is not reachable because it has an issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The tunnel process responsible for the creation of tunnel interfaces failed during initialization. The process will exit and as a result, no tunnel interfaces can be configured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LASER_CASE_TEMP
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-BOOTED_WITH_FALLBACK_SOFTWARE
### Response:
(Severity: 6), (Category: INFRA), (Description: The fallback bootloader menu entry has been booted, as is expected to happen when the router is reloaded before executing: <CmdBold>install commit<noCmdBold>. This is the software that was running before the most recent transaction was started. If the router was explicitly reloaded by the user before <CmdBold>install commit<noCmdBold>, then this is expected. If this syslog is seen under other scenarios, then this is unexpected.), (Recommended Action: If the user reloaded the system after performing an install transaction but before committing the software, then: No action is required. If the router was expected to reload with new software (as part of an install operation), then: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-4-BLOCK_OOR_YELLOW
### Response:
(Severity: 4), (Category: ROUTING), (Description: The SRv6 SID manager database has reached the blocks resource warning threshold for dynamically allocated local SIDs. Details about the limit can be seen with <Bold>show segment-routing srv6 manager<NoBold> command. Details about the block can be seen with <Bold>show segment-routing srv6 block<NoBold>. The list of local SIDs can be seen in <Bold>show segment-routing srv6 micro-segment local-sid<NoBold>), (Recommended Action: If this threshold is regularly reached, it may be a sign to reduce scale of Segment Routing IPv6 entries by changing topology or VPN allocation mode in BGP from Per CE to Per VRF)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_CANCELLED
### Response:
(Severity: 6), (Category: INSTALL), (Description: An install operation was cancelled via a user prompt. Use 'show install log <install ID> detail' for more details.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_8
### Response:
(Severity: 3), (Category: IP), (Description: In non-De-Registration PBUs, Lifetime should not be Zero.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-5-CORRUPTED_MSG
### Response:
(Severity: 5), (Category: OS), (Description: The message received by an application had inconsistent values.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-TIMER_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the TCP process sets up and initializes the various TCP timers.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-OIR_TRANSCEIVER_INSERTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This informational message indicates that the optic interface module was inserted on the given interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-2-FIRMWARE_UPGRADE_PWR_POWEREDOFF
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'power module firmware upgrade with out power feed cable makes incosistent firware upgrade within power sub-modules'), (Recommended Action: 'Please connect power cables(s) and try again.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-SPI_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error occured during initializing SPI. This might be a program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-EVAL_EXPIRED_WARNING
### Response:
(Severity: 3), (Category: LICENSE), (Description: The device evaluation period has expired.), (Recommended Action: Use the \'license smart register idtoken <id> \' CLI to register \ this device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_SKP-7-ERR_BAG_REGISTRY
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-SKYWARP library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-THREAD_POOL_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: OBFL manager will restart in this case as thread pool is necessary for OBFL manager to function. In this scenatio OBFL will restart and recover by itself.), (Recommended Action: If the issue is seen after restart, Please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-SLOT_DECODE_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: An error happened for a nodeid decoding.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-4-POLICY_CLEANUP_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: When deleting the specified policy, the policy_repository process encountered a problem. This could leave memory unfreed.), (Recommended Action: If the policy_repository process is using an excessive amount of memory, consider restarting it with 'process restart policy_repository' to clean up any unused memory. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_LIB-7-PTHREADKEY
### Response:
(Severity: 7), (Category: OS), (Description: The infrastructure library was unable to obtain a thread key for thread private data storage.), (Recommended Action: Check to see if sufficient memory resources remain for normal operations. Add memory if necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-GET_MTU_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The transport fails to get the MTU from the network protocol process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-MSG_CLINFO_GET_DATUM
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when accessing a client info structure.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-3-ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A function call returned an unexpcted error. Possible resource shortage or coding error. Monitor CPU,memory conditions and process crashes in that timing window.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-LABEL_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred whilst initialising the LABEL thread. This could be caused by failure to allocate resources or by errors when calling the MPLS label manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_EA-3-NOT_FOUND
### Response:
(Severity: 3), (Category: SERVICES), (Description: The IPSec SVI EA process received a request to process an interface that does not exist in its database. This indicates some sort of internal inconsistency.), (Recommended Action: It may help to restart the IPSec SVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'overload' command in IS-IS?
### Response:
The 'overload' command is used to set the overload bit in the IS-IS LSPs. This indicates that the router should not be used as a transit router, but can still be used as a source or destination for traffic. This is useful when the router is undergoing maintenance or is in a transient state.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSH_IPC_EM-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: osh ipc em errored within driver dll.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_TE_TUNNEL_CHASSIS_CFG_CHANGED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initialization process before this config is received. Needs attention with reloading the chassis.), (Recommended Action: System is inconsistent. Need to reload chassis for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-BAG_REG_FAIL
### Response:
(Severity: 3), (Category: SNMP), (Description: An internal operation failed. The system will attempt to recover.), (Recommended Action: Copy the message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP transport connection-mode passive feature?
### Response:
The BGP transport connection-mode passive feature allows a BGP router to only passively establish TCP connections for a peer, rather than actively attempting connections. The peer must be configured to actively establish the connection. It is configured with the neighbor transport connection-mode passive command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-4-ERR_BACKEND
### Response:
(Severity: 4), (Category: OS), (Description: Sysdb backend api call failed.), (Recommended Action: Please collect the output of the following commands: - show tech-support lpts - show tech-support sysdb - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RASF-4-NO_BASE_COMPARE
### Response:
(Severity: 4), (Category: ROUTING), (Description: This is a logic error in the construction of one of the ORA entities. The compare for checking two different route values against each other was missing.), (Recommended Action: This is not an error message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-DISK_ALARM_ALERT
### Response:
(Severity: 3), (Category: HA), (Description: When some monitored disk's usage is above 85%.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-DMA_ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: This is a error message in the NPU Driver to indicate DMA operation failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_CORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE correctable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-DUMP_INFO_PROBLEM
### Response:
(Severity: 7), (Category: OS), (Description: Something went wrong with the dump information storage scheme), (Recommended Action: Collect the following data and contact suppo. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_CAUGHT_SIGNAL
### Response:
(Severity: 4), (Category: SECURITY), (Description: SAM server caught a signal, and terminated), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'route-policy' command in IOS XR L3VPN configuration?
### Response:
The 'route-policy' command is used to define routing policies for importing and exporting routes between VRFs and the global routing table. It allows you to filter and manipulate routes based on various criteria such as prefix, community, and AS path. Route policies provide flexibility in controlling the exchange of routing information in an L3VPN.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-3-GEN_ERR
### Response:
(Severity: 3), (Category: OS), (Description: A generic error occured in the rt_check library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-4-CFG_RESTORE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Configuration could not be restored on some interfaces after they were created.), (Recommended Action: Re-enter desired config manually. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-DLL_CHECK_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: During the processing of a software change notice, the command to check the list of open dlls vs changed dlls failed. The routine will now attempt to fall back on default disposition.), (Recommended Action: Check the install logs if all the packages are downloaded and install operations completed properly Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in the CPA interface Shelf Manager), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-3-SYSMGR_GET_PROC_ROLE_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Sysmgr API to get the redundancy related proc role information has Failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_8_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_MACSEC-6-LATE_PACKET
### Response:
(Severity: 6), (Category: OS), (Description: Late packet, where PN < (NXT_PN - Window_Size). Window size will be configured.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-ASSERT_CTX
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal consistency check failed. Dumping runtime context for executing thread. There may be no immediate impact on traffic, but this issue should be addressed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_PGAR_MAX_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR PGAR MAX MEM ERR), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the metric-style command in IS-IS?
### Response:
The metric-style command is used to configure the type of metric used by IS-IS. The options are narrow (old-style 6-bit metrics), wide (new-style 24-bit or 32-bit metrics), and transition (both metrics during a transition period). Wide metrics provide a larger range of values and are useful in large networks. Narrow metrics are compatible with older implementations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-6-INFO_SESSION_TERMINATE
### Response:
(Severity: 6), (Category: L2), (Description: PPPoE session is terminated for a subscriber.), (Recommended Action: This is an informational message. Action is required only when session terminated due to some errors. Please check for terminate reason, take appropriate action if required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-ARB_SERDES_1_FAIL_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Arbitration serdes link 1 failure on FIA 1.), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: The requested operation could not be performed due to a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-USER_INFO
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The info about the top users of the specified resource.), (Recommended Action: It is an informational message along with packet depletion log message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-CHASSIS_TYPE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SOFT_ERROR_ALERT
### Response:
(Severity: 1), (Category: FABRIC), (Description: Soft error detected on FIA instance.), (Recommended Action: Please reload the board in the next maintenance window. Until then affected ports will be down. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-2-LOG_CRIT_OWNER_PLANE
### Response:
(Severity: 2), (Category: OS), (Description: A critical owner plane message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_ABORT_PRECHECK_FAIL
### Response:
(Severity: 1), (Category: INSTALL), (Description: The Quickstart operation has aborted due to an error when completing prechecks such as resource availability.), (Recommended Action: The reason for this Quickstart operation failure needs to be analyzed. Collect the show tech logs by running 'show tech-support qs' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-3-DMA_ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: This is a error message in the PSE Driver to indicate DMA operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-6-PCI_BUS_INFO_THRESHOLD_EXCEEDED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A device has been detecting a PCI bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-7-ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A general failure occured while executing a resource function. The message contains info about the cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of Redundancy Driver.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-SYSDB_REG_VERIFY
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 Management Agent encountered failure in registering verifier with SysDB. It will recover itself by restarting. Typically this error is caused if sysdb is unavailable for an extended period.), (Recommended Action: If the problem persists get the output of show processes, show sysdb trace, show sysdb trace clientlib job <jid of ipv4_ma>, show ipv4 ma trace location <>, debug sysdb verification job <jid of ipv4_ma> from the location the error message comes from.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-MUTEX
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred in the pthread functions used for thread synchronization. This is most likely a system error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show running-config - show configuration failed - show configuration history last 5 - show commit changes <last 5> - show process ospf location all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-MAXPFXDISCARDPATH
### Response:
(Severity: 5), (Category: ROUTING), (Description: Number of prefixes received from a neighbor for a given address family has exceeded level configured with the 'maximum-prefix' command. The extra path is discarded.), (Recommended Action: Check the prefixes received from the neighbor and verify whether the limit should be increased or the neighbor is sending more prefixes than expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-PENDING_SEGMENT_FLUSH_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Core dump failed because the pending segment flush failed.), (Recommended Action: Collect the following data and raise DDTS. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-ERR_BATCH_COMPLETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv6_rib_batch_buffer_complete.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC_MPF-6-INFO
### Response:
(Severity: 6), (Category: SERVICES), (Description: The system is in normal state. This is info log.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-RN_VPARENT
### Response:
(Severity: 3), (Category: MGBL), (Description: An updation operation to an internal data structure failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-7-CONN_PAK_AREA_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: CLNS failed to connect to packet subsystem during initialization. As a result, CLNS will not be able to receive or send packets. It's an internal error.), (Recommended Action: Please contact cisco-support with the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-DEBUG_SPECIFIC_ALLOC
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-DBGREG
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unable to initialize debugging flags. Debug commands will not function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-HAL_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A HAL API function has failed in Shelf Manager. The details are supplied in the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-6-QFIFO_DEBUG_NETIO_INIT_FAIL
### Response:
(Severity: 6), (Category: QOS), (Description: Debug initialization failed within the qfifo node on the NetIO chain. Debugs may not be printed.), (Recommended Action: Try restarting netio process -get the JID by 'show processes netio location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-FAN_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The indicated fan has measured RPM below operating level.), (Recommended Action: Verify the failure, give CLI: (admin)# show env --> particularly fan output (admin)# show env trace If the fan failure does not alleviate after 30 minutes, give CLI: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_REX-3-EDM
### Response:
(Severity: 3), (Category: SERVICES), (Description: During intialization of the EDM an error occurred. The EDM was not successfully registered, so show commands and other manageability applications may not function correctly. Otherwise the diversion manager will work correctly.), (Recommended Action: This is not a fatal error. If the show commands are required, restarting the REX process should clear up the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-INTERNAL
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server has either failed on a function which it expected to succeed, or has got itself into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-3-NCS1K_LOW_POWER_PROV_SKIP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Port configuration on the specified port failed.), (Recommended Action: The casue for the failure is that the system detected low power situation. This means both the PSU is not having 220V supply, so lower board slices(2,3) should not be used, otherwise it can lead to the node shutdown. If slice 2 or 3 is in provisioned state, please unprovision the slices and power cycle the node once if you want to continue with low power supply or resolve the power fluctuation and re-provision the slices.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-MKPDU_ICV_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Integrity check validation(ICV) failed for the received MKPDU, identified by the given CA(CKN) & RxSCI.), (Recommended Action: For PSK(pre-shared-key) authenticated session, make sure to have, same CAK(key-string)(keychain config for MACSec), configured with valid lifetime for all CA members, for EAP authenticated session, check for the dot1x EAP methods & credentials.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-3-CLI_SPAWN
### Response:
(Severity: 3), (Category: MGMT), (Description: This is expected when there is issue with configuration CLI, CLI application is not present at required location), (Recommended Action: The issue should be recovered when retrying login, if this message keeps on coming, then please collect required log)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-FATAL_ERROR_CCC
### Response:
(Severity: 3), (Category: INFRA), (Description: A fata error occurred in CCC communication. Note the reason for the error.), (Recommended Action: Root cause of the error needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_EDM-3-SYSDB_EDM_DATA_GENERATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be generated.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERR_INFO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-3-SW_CHANGE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The attempt to register with the install manager for change of software notification failed. The process will restart in an attempt to clear the problem. Route policy may not be operational until this is resolved.), (Recommended Action: This error message may be transient. Restart policy_repository and try the use case again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-PATH_ID_OOR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered when allocating path-id for the path.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all - show route ipv4 <prefix> detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-COMMS_RETRY_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A PTP process has failed to send a message and attempts to retry the send have also failed.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_SEND_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering performance counter with stats infra failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-ERR_IMC
### Response:
(Severity: 3), (Category: L2), (Description: An internal error encountered during an operation under Multilink Frame Relay(MFR) Management Agent(MA)'s interaction with Interface manager(IM).), (Recommended Action: If observed consistently across each recreate, collect required_info and contact SUPPORT.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-UNREGISTERED_FEATURE
### Response:
(Severity: 7), (Category: OS), (Description: The specified feature is not yet registered for OBFL manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_OS-3-INFO_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Prints important message from the CCI OS library), (Recommended Action: Check the Hardware availability. Also collect dmesg.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_NSF_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMRP-3-ROUTE_ADD_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred when attempting to create the platform route resource. This route has not been installed.), (Recommended Action: This may be a transient error. The feature will re-attempt route creation, in case the condition is transient. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ether_spa_plugin-6-SPARECOVER
### Response:
(Severity: 6), (Category: L2), (Description: An error occurred in the SPA, recovery would be attempted. If recovery succeeds no further messages would be logged and no intervention would be required.), (Recommended Action: If this error continues to occur, move the SPA to a different subslot or to a different slot altogether. If the problem persists, collect the output of 'show hw-mod sub <>/<>/<> counters l2-tcam' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_PKT_F0_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 0 single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-SATELLITE_STATUS
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The satellite has not been discovered on one or more links, or the control session to the satellite has never been established.), (Recommended Action: Run 'show nv satellite status' to display the current status and reason why the satellite is not discovered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-3-ECM_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: 'There is a software error when creating ECM connection.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-CORE_FILE_OPEN_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Could not open a file to dump core. Please configure a valid path.), (Recommended Action: Displayed when a configured path is not accessible. Please configure valid path as exception paths.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-HELLO_ADJ_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: An LDP hello adjacency has changed state (up/down). If adjancency has went down, then a reason for adjacency going down is also displayed. This message appears only if the <Bold>mpls ldp log adjacency<NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-6-SYSMGR_PROC_READY
### Response:
(Severity: 6), (Category: OS), (Description: An internal error was detected when trying to notify sysmgr that we are ready.), (Recommended Action: Restarting pifibm_server_lc and pifibm_server_rp may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-ASSERT
### Response:
(Severity: 4), (Category: OS), (Description: Something went wrong in the flow due to which critical assertion failed.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_PLIM_SB-3-SPA_FW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The error message in parentheses is generated by SPA firmware for reason as mentioned in the error message. This error, and the message is logged by the plim holding the SPA.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-UNSUPP_RX_NON_CH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Rx POD detects an unknown error on a pod. The pod might not be functioning properly, and can cause cell drops, or corruption from received cells. There can also be a software bug such that the error is not handled), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-GN2412_LINK_DOWN_CLEARED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link on GN2412 device was down, but now cleared), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlea-3-NATIVE_VLAN_NOTIF
### Response:
(Severity: 3), (Category: L2), (Description: The VLAN EA process encountered a problem while trying to send a Native VLAN change notification. Native VLAN support for interfaces on the affected node may not function correctly.), (Recommended Action: Restart the VLAN EA process on the affected node with <CmdBold>process restart vlan_ea location (node)<noCmdBold>. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENV_AGT_DLL-3-MSG_IF_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Provide the following CLI: (admin)# show env trace loc <target location> Wait 1 or 2 minutes)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-LOCAL_EID_NO_ROUTE
### Response:
(Severity: 4), (Category: IP), (Description: 'There is no RIB route that covers or is a more specific ' 'of the configured local EID database prefix. This means ' 'that the ETR will not be able to forward decapsulated ' 'packets to their destination.'), (Recommended Action: 'Check the network connectivity and routing ' 'configuration within the LISP site and re-establish ' 'a route to destinations covered by the configured ' 'EID prefix.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-4-ERR_CHKPT_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq encountered an error during Checkpoint Init.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_OC_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BITS transmitter has detected an open circuit condition.), (Recommended Action: Ensure cable connection between the configured interface port and external equipment.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-6-EA_LTRACE_INIT_FAIL
### Response:
(Severity: 6), (Category: QOS), (Description: Ltrace initialization failed within EA. Ltraces may not be printed), (Recommended Action: Try restarting QoS EA process get the JID by 'show processes qos_ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of TURBOBOOT in Cisco IOS XR?
### Response:
TURBOBOOT is used in Cisco IOS XR for booting the system from a minimal state, often utilized during system recovery or initial software installation to load a specific software image.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-FILE_TOO_SHORT
### Response:
(Severity: 7), (Category: OS), (Description: The file is read when it's being written, or version mismatch between the file and the reader.), (Recommended Action: Informational only. Indicates upgraded software accessed older version file before it's updated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP8
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZAPDISK-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: zapdisk Initialization failed. Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-NORTRID
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPF failed while attempting to allocate a router ID from the IP address of one of its interfaces as no suitable IP address was available.), (Recommended Action: Make sure that there is at least one interface that is up and has a valid IP address. If there are multiple OSPF processes running on the router, each requires a unique router ID. You must have enough 'up' interfaces so that each of them can obtain a router ID. It is highly recommended that you configure loopback interfaces or use the router-id configuration command to better control the selection of OSPF router IDs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_CHKPT
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server encountered an error while updating or accessing its checkpoint information. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_UIDB-2-OPEN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the pidb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_SW_HW_INCOMPATIBLE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-2-ERR_MEM_ALLOC
### Response:
(Severity: 2), (Category: ROUTING), (Description: Memory allocation of a critical OSPF resource failed because of a low memory condition. The OSPF process was terminated.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-EYE_SCAN_DONE
### Response:
(Severity: 6), (Category: FABRIC), (Description: Fabric driver completed collecting Eye scan dump for the link.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-COMP_ENCODING_SIZE_TOO_BIG
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL compress yields an encoding size greater than 32 which cannot be accommodated.), (Recommended Action: Revise the ACL's object groups to yield encoding size less than or equal to 32 bits for IP prefix fields or 16 bits for SRC port field.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred in ipv6/rpl code.), (Recommended Action: Try restarting the rpl ma process using the 'process restart ipv6_rpl_ma' cli. If problem persists contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_FIB-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the SSE FIB to indicate that an error was seen during init operation. A return code is returned to PI which can do a retry or exit based on if error persists.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-AAA_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to execute a AAA function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_SYSMGR_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-SCHEDPOLICY_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver was unable to set the scheduling policy for the interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-INTERNAL
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent has encountered an invalid state - this point in the code should not have been reached. The HTTP process may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-CPU_PERR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter driver detected a parity error from the CPU), (Recommended Action: The error message indicates bad connection on CPU address/data bus, the card should be replaced if the error message persists after a few reloads of the card by either 'hw-module location <> reload' or OIR of the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-RECEIVE_OAMPDU_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon was unable to receive an OAMPDU successfully from SPIO. This could be due to the OAMPDU not being received properly or being corrupt such that the OAMPDU can't be properly processed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the default behavior of the running configuration in IOS XR?
### Response:
By default, the running configuration in IOS XR is not saved automatically. Changes made to the running configuration are lost on a reload unless explicitly saved to a file using the 'save configuration' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-6-MKPDU_ICV_SUCCESS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-THREAD_INIT
### Response:
(Severity: 2), (Category: ROUTING), (Description: FIB thread-specific initialization has failed due to the reason indicated in the message. The process will attempt to recovery by restarting. If the restart count is excessive then the node may reload. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_TXM-3-ENS_INIT
### Response:
(Severity: 3), (Category: QOS), (Description: The QOS TXM hit an error condition when registering with ens. Due to this failure LOCP feature may not work. This failure occurs in one of the following conditions: 1. Failed to get the event manager of the netio control thread 2. Failed to initialize ENS subsystem in LR-scope. 3. Failed to create new nrs class/data handle. 4. Failure during ens/nrs registration.), (Recommended Action: Collect logging info after enabling qos data txm debugs. Also collect the information specified under the component required_info and call your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-6-TRAP_QFULL
### Response:
(Severity: 6), (Category: SNMP), (Description: SNMP traps for the host is dropped due to trap queue full condition.), (Recommended Action: 1) Check whether trap delay timer is configured and if required increase queue size 2) Check 'show snmp trap details' for details on trap being dropped and analyze if there is a burst of traps generated by any mib.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_CONST_BP_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-0 is constantly backpressuring bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NCS4K_4H_OPW_QC2-3-MDIO_INVALID_MEMORY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MDIO Invalid Memory), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-IPV4_SCALE_INTERNETOPT_UNSUPPORTED
### Response:
(Severity: 2), (Category: FABRIC), (Description: The fia config (fia_cfg) has found pre-existing IPv4 Scale Internet-Optimized config. [hw-module fib ipv4 scale internet-optimized]. This feature is not supported anymore and therefore ignored. Please delete this config before upgrading to next release.), (Recommended Action: Remove the ipv4 scale internet-optimized configuration If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-API_DOWNLOAD_FAIL_STATUS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug info %s - a string containing the slot number.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-MAC_ADDRESS_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process exited because was not able to intitialize the local mac address.The process will respwan itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-IF_OIR_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The swappable interface on the network processor failed the OIR event.), (Recommended Action: Retry the OIR action for the swappable interface. If this condition persists, the line card should be reset.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-LOCKING
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB server has either failed to acquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_PAK_CLIENT_CONN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-4-EXIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to notify the system manager that it was exiting. In very rare cases, this could result in the process not being restarted when it ought to be.), (Recommended Action: If the process in not running and it ought to be (ie, there is PIRD configuration remaining), then remove all PIRD configuration, commit this change, then re-apply the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_0_RX_FRAME_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-0 received an errored frame interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPDB-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-6-PLUGIN
### Response:
(Severity: 6), (Category: L2), (Description: This is just an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: IPSec Base component warning message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOFRR_FLOW-3-DETECT_LOSS_PRIM
### Response:
(Severity: 3), (Category: ROUTING), (Description: LC control plane detected that either no traffic coming or traffic loss is occurred on primary path. Data plane should switch over to the MoFRR backup path already. But somehow the traffic switchover notification message sent from data plane has been lost from NP on the way to LC CPU. With this detection, control plane will re-sync with data plane on MoFRR route.), (Recommended Action: It is a self-recovery detection. There is no extra action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-ETH_SERVER_BUFF_FREE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to free the buff for eth_server. %s- Reason for not being able to free the buffer.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-WRONG_IDPROM_CONTENT
### Response:
(Severity: 4), (Category: DRIVER), (Description: Card manager has detected that there is incorrect content in the IDPROM of indicated module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-4-PORT_ENABLE
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred when attempting to enable a SONET/POS port.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-4-MUTEX_MON
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: SPP or one of its clients was unable to register to monitor a shared memory mutex. This indicates that either system resources are low, or that there is an internal problem with SPP or the shared memory infrastructure. Restarting SPP or its client processes may result in memory leaks.), (Recommended Action: Wait until any situation which is putting stress on system resources is resolved, and then try the requested action again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSLIB-3-INT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred as indicated in the message.), (Recommended Action: Collect show tech-support and other debug information for the specific client process as well as LSLIB traces and system logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_RESTORE_CLASS
### Response:
(Severity: 3), (Category: OS), (Description: nrs_chm_chkpt_create_class failed while restoring the class handles from the chkpt shared memory after nrs server process restarts.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVENTORY_FIELD_IS_NULL
### Response:
(Severity: 3), (Category: MGBL), (Description: Error in extracting rack/slot/module name from sysdb path.), (Recommended Action: Restart parser_server process (process restart parser_server). If the message recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-IM_CONN_TO_COID_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to retrieve a connection ID from the IMD connection context. This may be due to a low-memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-6-LATCHING_SESSION_STARTED
### Response:
(Severity: 6), (Category: L2), (Description: A latching loopback session has successfully started. This is for informational purposes only.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-3-SVC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A service API failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_REMOTE_DYING_GASP
### Response:
(Severity: 6), (Category: L2), (Description: The remote peer has indicated a dying gasp. This means that the remote peer is coming down.), (Recommended Action: Restart the remote peer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-EVQ_SIZE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while retrieving the size of the specified queue. As a result IS-IS's internal state may be inconsistent. This indicates an internal software programming error.), (Recommended Action: Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an unexpected/invalid state while trying to process an event for a client request. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-POLICY_INTERFACE_REGISTER_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to register for notifications for interfaces in configured Bandwidth Notifications policies. This situation could indicate an issue with the interface names in the configured policies, or that system resources are low. The operational state of CFM will now be out-of-sync with policy configuration as some interfaces cannot be resolved.), (Recommended Action: Examine configured policies and check for invalid interface names. Otherwise restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you verify the software installation on Cisco IOS XR?
### Response:
To verify software installation on Cisco IOS XR, the 'show install active' command can be used to display the currently active software packages on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALID_NOTIFICATION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'nvgen_server got an invalid notification form ovl process'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-AUTO_RELOAD_FAILURE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Auto reload of the LC after auto fpd upgrade is not initiated, as errors are seen during FPD upgrade.), (Recommended Action: If this warning is seen, try to check for other FPD error messages and resolve the errors (by manually updating the FPD) and reload the Line Card if required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD-2-MEM_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This is an error message from FPD operation. It indicates error condition was encountered in FPD operation.), (Recommended Action: Clean the harddiska: folder)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-NODE_UNDERGOING_FPD_UPGRADE
### Response:
(Severity: 6), (Category: INFRA), (Description: Automatic FPD upgrade is occurring on the node. This may cause the node to take longer than usual to boot after apply by reload. The node timeout has been extended to 15 minutes. If, after this time, the node has not booted correctly and not set up the required communication path, then the operation will be failed on this node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-LWA_REM_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to remove a username from the LWA DB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_0_OFLOW_FIA2BR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-0 FIA to bridge instance-1 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-APP_INTF
### Response:
(Severity: 3), (Category: SERVICES), (Description: ServiceApp interface cannot be moved from one cgn instance to another without first removing it from the latter.), (Recommended Action: This is a serious error and cgn_ma process has to be restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-MEM
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an error has occurred during memory allocation. This error is due to insufficient memory available in the system.), (Recommended Action: Please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-BAD_VSA_VENDOR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Vendor specified for the VSA is not recognized according to table bitmap. An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_P2MP_SRVR-3-INIT_CRITICAL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A critical error occured during the initialization of SE P2MP_SRVR process which involves exiting the process. The SE P2MP_SRVR will restart and unless the same error occurs on the next attempt the SE P2MP_SRVR will function normally. If the error is persistent, it indicates the system error or HW error which needs further investigation. The cause of the error will be mentioned in the message displayed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-3-ECM_SETRETRY_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed to set linear connection retry mechanism in Port Arbitrator Client), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-INVALID_NETLINK_PAYLOAD
### Response:
(Severity: 4), (Category: INFRA), (Description: The Netlink module received an invalid Netlink message from the kernel. This could mean that XR and Linux state synchronized by the process may be out of sync.), (Recommended Action: Examine XR and Linux states for interfaces whose configuration is being mirrored by the process. If they are out of sync, restart the process. If the problem persists, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-KEY_NOT_FOUND_IN_PROFILE
### Response:
(Severity: 3), (Category: SECURITY), (Description: In Main Mode, The ID payloads are exchanged only in MM5 and MM6. Since keyring material is needed in earlier stages of the negotiation, it is looked up based on peer address. This error is seen when the selected keyring appears to not match the keyring configured under the ISAKMP profile for that peer.'), (Recommended Action: 'Make sure that the keyring in which the key exist is attached to the ISAKMP profile')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_COMMIT
### Response:
(Severity: 7), (Category: INSTALL), (Description: The current operation could not complete the transaction of items which are needed to activate it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELOGM-4-EXITING
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to process incoming events, and will exit. It should be restarted by System Manager and resynchronize its internal state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-RP_REDUNDANCY_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred when the ANCP process tried to initialize the redundancy data with its standby RP/DRP), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and if ANCP process is able to initialize and come up successfully after restart, then there is no need to take any action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-INFO_HEAD
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The header for resource depletion information that follows this message. It is of the format: PROCESS_NAME PID COUNT), (Recommended Action: It is an informational message along with packet depletion log message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-AD9554_DEVICE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AD9554 device failure/success.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-6-IMA_UNEXPECTED_BLOCK_FOUND
### Response:
(Severity: 6), (Category: MGBL), (Description: Kernel IMA data was not freed as expected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-6-NODE_RELOAD
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Message indicating that the node has received a reload notification and the node is going to reload soon.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE_ERR_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE_ERR_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-4-ERR_LTRACE_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: The Fabric driver could not open/initialize the ltrace buffer. The Fabric driver and the system should still function as normal, with the exception that ltrace will not be available for sfe_drvr process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-RECEIVE_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: A failure has repeatedly occurred when attempting to register to receive PVST+ or PVRST BPDUs, and either the retry timer could not be allocated or the maximum number of retries has been reached. No BPDUs will be received on the affected sub-interfaces, and hence the MAC table will not be flushed when a topology change occurs. This could result in traffic being forwarded incorrectly or dropped for a period of time, until the MAC entries time out or are relearned.), (Recommended Action: It may be possible to recover by restarting the pvstag-io process on the affected line card, useing the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSELIB-4-EXIT_ON_ERR
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred in the PSE ASIC client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the PSE driver. The root cause may be located in either hardware or software.), (Recommended Action: *RECUR* Copy the error message exactly as it appears on the console)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-ERR_THREAD_MUTEX_LOCK
### Response:
(Severity: 4), (Category: FABRIC), (Description: FSDB encountered an error while locking a mutex to access the specified shared resource. The operation related to the resource may be affected while the process continues to run normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FTI-6-POOL_HEALTH
### Response:
(Severity: 6), (Category: INFRA), (Description: Opflex pool health change), (Recommended Action: This message is for information purpose only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-HW_MODULE_PROFILE_PFC_NEED_RELOAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: If a traffic-class is added or removed from the config, there will be inconsistency between the user config and the hardware. Needs attention with line card reload.), (Recommended Action: System LC is inconsistent. Need to reload the line card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMIB-3-BAG_FAILED
### Response:
(Severity: 3), (Category: SNMP), (Description: A problem occurred while encoding or decoding information from a bag.), (Recommended Action: If the error repeats, copry the error message as it appears and report it to technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_REGISTER_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering with stats infra failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_OC768-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the plim_oc768 driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM_TEST-6-UPDATE_ERR2
### Response:
(Severity: 6), (Category: PLATFORM), (Description: hfr_pm_test encountered an error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.), (Recommended Action: This is just test software which the customer does not get.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-PCI_RAM_CORRECTABLE_ERROR_MASK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates a correctable single-bit error occurred on this internal SRAM. This memory is considered 'persistent' and requires special handling as described in the 'Data_corrected' row of Table 1.2. %s - name of ram that sbe occurred %x - key of error node recorded %s - error data), (Recommended Action: Ignore this unless it comes with other error message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-4-WD_EXPIRED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to punch the watchdog timer within one second.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-1-CPU_HOG_5
### Response:
(Severity: 1), (Category: HA), (Description: This message is displayed), (Recommended Action: The command 'show watchdog trace' will display additional information about the potential CPU hog. If the hog is persistant, contact technical support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKEND-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: The backend library has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-SHM_ENTRY_ALLOC_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An attempt to allocate entry in shared memory region failed.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_0_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'redistribute' command in OSPF?
### Response:
The 'redistribute' command is used to inject routes from one routing protocol into another. In the context of OSPF, it is used under the OSPF process to redistribute routes from other protocols (connected, static, ISIS, EIGRP, BGP, etc.) into the OSPF routing table.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-INPUT_SIGNAL_ERROR
### Response:
(Severity: 1), (Category: FABRIC), (Description: Input signal to the device doesn't match expected value.), (Recommended Action: Please reload the board in the next maintenance window. If this fault happens on a single FIA/slice on LC and the fault could not be cleared after card OIR, please RMA the card. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates memory allocation failure. Inventory information for the specified slot would be incomplete. This would affect information provided to CLI 'show inventory', inventory schema, and the entity related MIBs for the specified slot. %s indicates the internal data structure that failed allocation for.), (Recommended Action: Reduce other system activity to ease memory demands and restart process invmgr via CLI 'process restart invmgr' to recover. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_CLIENT_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver subsystem initialization error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-2-UNKNOWN_PLATFORM
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: platform_get_type returned an unknown platform type.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_HANG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An I2C bus hang was encountered when attempting to access a sensor.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-DRAM_INIT_FAILURE
### Response:
(Severity: 2), (Category: L2), (Description: The NPU driver was unable to initalize DRAM. and must trigger a node bringdown to effect recovery.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-TTY_NOT_REGISTERED
### Response:
(Severity: 3), (Category: MGBL), (Description: The RS232 DLL tried to perform an operation on a TTY that isn't registered with the TTY Server.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC_CTRL-3-RACK_MISMATCH_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The rack number in rommon does not match the rack number in admin config. Fixing the rommon rack number to that in admin config. This will cause a reload of the system.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T3E3-4-FEAC
### Response:
(Severity: 4), (Category: L2), (Description: New Far End Alarm Code received.), (Recommended Action: No action required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-NO_CONSOLE_TUNNELING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: There is a hardware issue and MCU is not accepting configuration which prevents the support of console tunneling feature.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-UNABLE_TO_MOUNT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Check for partitions and mount Satori internal eUSB. This notice message will gets printed when it unable to mount Satori internal eUSB.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_TABLE_REF_COUNT
### Response:
(Severity: 3), (Category: OS), (Description: Any table has to be part of the subgroup 0.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCAM_MGR-2-INIT_INTERNAL_DATA
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: 'Typically this indicates an error condition, ' 'such as tcam mgr crashes while internal dats are updated. ' 'and leave the internal data in an inconsistent state ' 'To recover from the error, ' 'TCAM Manager has to reset its internal data.'), (Recommended Action: 'Please monitor the linecard ' 'and reload the linecard if necessary. ' 'hw-module location <> reload <path>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-TRANSACTION_NOT_COMMITTED
### Response:
(Severity: 6), (Category: INFRA), (Description: There is a currently a transaction in progress, and changes have been applied. At this stage, the active software is different to the fallback software. If the system reboots before the transaction is committed, the fallback software will be used.), (Recommended Action: Use 'install commit' to commit the transaction.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-LTRACE_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA process encountered an error during software initialization. ltrace initialization is failed. So we will not get any traces using ltrace cli. It may fail very rarely. It will work most of the time. We added this message only for debugging purpose.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: LIBRARY), (Description: SLICE_MGR Library Initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-LOCAL_CORE_ISOLATION_CLEAR
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has recovered from local core isolation and has attempted to recover the ports in the redundancy group.), (Recommended Action: This message may not require any action. However the <CmdBold>show l2vpn iccp-sm group group-num<NoCmdBold> command may be used to verify the state of the ICCP-SM core interfaces. Reference the L2VPN P_MCLAG section of the IOS XR documentation for details on core isolation failures and related configuration commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ENDCOPTIONMISSINGCOMMA
### Response:
(Severity: 3), (Category: MGBL), (Description: 'end option mark is missing a comma in the command. The calling function the coption id and the command are are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-USER_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the node will be reset because user has requested to reload the node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show l2vpn forwarding bridge-domain' command in IOS XR?
### Response:
The 'show l2vpn forwarding bridge-domain' command is used to display the L2VPN forwarding information for bridge domains. It shows the bridge domain name, the outgoing interface or pseudowire, the next hop, and the MPLS label used for forwarding. This command is useful for verifying the L2VPN forwarding plane.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-6-NODE_PWRCYL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Message indicating that the node has received a power down request and the node is going to power down.), (Recommended Action: No action is required. The message is logged for informational use.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-7-INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: An unexpected internal error occurred in the configuration subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMC_GTRIE_DEBUG-6-TERM_ERR
### Response:
(Severity: 6), (Category: ROUTING), (Description: Internal non-serious error. GTRIE debug library termination failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_1_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process try to request more memory. The requested operation by l2snoop could not be accomplished because of a low memory condition.), (Recommended Action: In the problem recurs, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TP_ALARM-4-LOCKOUT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The indicated LSP has entered or exited lockout state due to administrative action at one endpoint.), (Recommended Action: If the state change is unexpected, confirm the local configurations as well those LSRs on the path of the LSPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-FAB_LICENSE_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is enabled without having valid license. This feature is per RSP3-Lite based, so in a HA setup 2 licenses required. In stand alone setup 1 license is enough. Use 'admin show license' CLI to check license status.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFM encountered an memory allocation error), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_MA-7-INIT
### Response:
(Severity: 7), (Category: QOS), (Description: The Afmon MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the Afmon MA process.), (Recommended Action: Wait until sysmgr process restarts the Afmon MA process. If problem still occurs, please collect 'show tech-support performance-traffic' and contact Cisco technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-NODEID_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_primary_server process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show cctl_primary_server location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-6-REBOOT_INITIATED
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message that reboot library initiated reboot), (Recommended Action: None No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_AHS_LOS_LANE0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-PCIE_CORE_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: CIB PCIe core error overrun), (Recommended Action: Reset the board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-OPERATION_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The update operation for the specified FPD has failed.), (Recommended Action: Retry the operation to update the image. If the retry operation fails, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the <CmdBold>show logging<noCmdBold> and <CmdBold>show tech-support<noCmdBold> commands and your pertinent troubleshooting logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_BRST_MAX_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered interlaken Rx burst max exceeded error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_UCORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory uncorrectable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SERVER-7-ERR_ATTR_INIT
### Response:
(Severity: 7), (Category: OS), (Description: Failed to init pthread attr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_XRV9K-4-ERR_CERR_REG
### Response:
(Severity: 4), (Category: L2), (Description: BFD PLAT was unable to register to component error message services. This is probably due to a faulty installation.), (Recommended Action: Make sure the libplatform_bfd_cerror.dll is present in lib/cerrno. If the DLL is present, the process must be restarted before it can function correctly. If the DLL is not present, then the problem is with image installation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-EVM_RETRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to the external event manager to set connection retry values failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ACTION_FAILURE_DETAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. It also provides a more verbose information. Here is a list of possible reasons for this message (not all-inclusive). - Failed to alloc vclabel stats. This condition indicates a problem with the software on the card. Typically, this occurs when the software failed to alloc vclabel stats.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-UNRESOLVED_HOOKPOINT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unresolved hookpoint'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_ATOM-4-INTERNAL_ERROR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: L2FIB entered into an invalid state because of incorrect sequence), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-PKTDROP
### Response:
(Severity: 3), (Category: ROUTING), (Description: An input packet was dropped for the specified reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-TO_MRIB_MDT_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_PROC_ABORT_REQUEST
### Response:
(Severity: 1), (Category: INSTALL), (Description: Quickstart operation aborted due to the named process requesting an abort on the given node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The reason for this qs operation failure has to be analyzed. Collect 'show tech-support qs' and forward the logs to the TAC. In addition, 'show tech-support' should be gathered for the process which requested the abort where possible. These logs should also be forwarded to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-6-OPERATION_SUCCESS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message succeeded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SESSION_SECURED
### Response:
(Severity: 5), (Category: L2), (Description: MKA was able to secure the MKA Session identified by the interface and CKN given with the peer identified by the RxSCI given. SESSION_SECURED happens successful only after MACsec Secure Channels and Secure Associations have been installed and enabled for both Rx and Tx.), (Recommended Action: No action required (normal operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-BD_BVI_VMAC
### Response:
(Severity: 4), (Category: L2), (Description: The HSRP or VRRP MAC conflicts with that of another interface in the bridge-domain.), (Recommended Action: Reconfigure the HSRP or VRRP MAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_THRESHOLD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: ASIC errors have exceed the threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_LQ_PKT_LEN_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 1 LQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-LOCK_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Internal error during locking of TCP resource.), (Recommended Action: Please try restarting the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-INVALID_LEAP_SECONDS_CONFIG
### Response:
(Severity: 4), (Category: L2), (Description: At least one of the leap seconds configuration items implies a leap second event that will result in the UTC offset changing by more than one second. This is an invalid change since the final minute of each day may only contain 59, 60 or 61 seconds.), (Recommended Action: This error suggests a misconfiguration. If using leap second offset configuration, adjust the configuration such that the UTC offset will only change by one second. If using leap second file configuration, check the file for consecutive entries which differ by more than one second.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_CONNECT-3-LOCKING
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Connection library encountered an unexpected error occurred acquiring a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-TARGET_CFG_UNLOCKERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process failed to release exclusive lock held by this session.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-EGRESSQ_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to create one of the egressq queues.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-1-ERR_HW_DLL
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabricq encountered an internal hardware dll api error. These type of errors are usually generated from CAI APIs. Below gives an example of where these type of error could be coming from: 1) iLite link errors 2) cci device discovery errors 3) gaspp driver init 4) cdma api errors 5) udma api errors 6) bist api errors), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-PULSE_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The SockIO SPP plug-in receive thread failed to communicate to the main thread and terminated. No more data will be read from the ports), (Recommended Action: If any problems are seen, they may be rectified by restarting the spp process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
METRO_STATS_API-7-RESERVE_LMT_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the Hardware Stats Manager Library to indicate the stats reserve limit is reached. In most cases these messages will stop once the temporary condition is resolved. Examples of when this error occurs are: 1. The client tries more counters than that are free for that type), (Recommended Action: No action is required. These are Debug messages. An error was returned by Stats Manager APIs to applications. Applications receiving this error will report the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_UCORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory uncorrectable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_OPERATION_SYSTEM_ERROR_GLOBAL_NODES
### Response:
(Severity: 3), (Category: INSTALL), (Description: A system error occurred during an install operation. This may indicate a transitive problem within the system, a problem with the code or a user error not verified by the install system.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repair' if anomalies are found. Reattempt the install operation. If the problem persists collect diagnostic information about the failure using the specific command and pass it to your TAC representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-ERR_EVM_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An internal error was detected when trying to create EVM connection. It can fail during following scenarios: 1) EDM registration/connect/notify. 2) BAG's rule registration failed.), (Recommended Action: No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_SYSDB_BAG_DECODE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A Bag related error occurred.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Cisco IOS XR Zero Touch Provisioning (ZTP) feature in network deployment and monitoring?
### Response:
The Cisco IOS XR Zero Touch Provisioning (ZTP) feature allows automating the deployment and configuration of Cisco IOS XR devices. It enables the device to download its initial configuration from a remote server without manual intervention, which simplifies the network deployment and reduces the chances of configuration errors.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-4-SVC_ZERO_LEN_PKT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: mbus debug information %d - mbus message type. %d - slot where packet originated), (Recommended Action: we can safely ignore this message if it is seen once.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_SOP_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered interlaken Rx missing SOP error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-COPTIONNOTPRESENT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Coption is missing in the command. The calling function and the command are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EASYDEBUG-2-GEN_ERR
### Response:
(Severity: 2), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-KDUMP_START
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OS running on the indicated card is reporting kdump has started.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-4-ATTACH_RECONNECT_HANDLER
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to attach a reconnect handler to ethernet server. If the ethernet server restarts, heartbeat agent may not be able to receive/write messages, which could eventually lead to this node being reset by the RSP heartbeat monitoring code.), (Recommended Action: If the issue results in any adverse system behavior please contact your Cisco technical support team after collecting the following information: 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-MISSFILTER
### Response:
(Severity: 4), (Category: MGBL), (Description: The command entered requires a filter name and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-NO_CHANGES_MADE
### Response:
(Severity: 6), (Category: INFRA), (Description: The requested install action resulted in no action being taken on any packages. This may be expected if the specified packages are already at the appropriate version (for example, a package is already installed at the highest version available before an upgrade operation). Alternatively, it may indicate an error in the specified operation parameters. Examples include (but are not limited to) a typographical error when requesting the install action, for example removing a non-existent package, or incorrect repository configuration.), (Recommended Action: Check the requested install action is what you intended it to be, and if so, check that any repositories you may be using are configured correctly and are accessible. If carrying out a package upgrade, for instance, check that the desired package is available at a higher version via <CmdBold>show install available all<noCmdBold>. If carrying out a package remove, check that the intended package is active via <CmdBold>show install active all<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-7-NOMEM
### Response:
(Severity: 7), (Category: L2), (Description: The process is out of memory.), (Recommended Action: Check process list for source of memory loss. Check if h/w memory requirements are met.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-3-DEBUG_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the RAW process try to do debug related initialization.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-FILE_NOT_IN_LOADPATH
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the installation is corrupt, or the Package infrastructure is behaving incorrectly. An expected file was not found in the package directories, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-DATABASE_RESET_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: After a modify rollback failure, QoS EA will attempt to reset its database, but this reset attempt failed. The database for the said interface might be in an unknown state. Neither the old policy nor the new policy is applied in hardware for this interface.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-CONN_RETRY
### Response:
(Severity: 4), (Category: HA), (Description: RMF failed to establish a connection to RMF on the another card.), (Recommended Action: If condition is reported multiple times, collect show redundancy trace location all, show redundancy, and show logging output and contact customer service.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_CPP_DATA_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS to CPP packet data multiple bits error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-ELMI_UPDATE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured when attempting to update E-LMI. This event was triggered by either a change within the network (e.g. a remote MEP going missing), a change to local MEP or cross-check configuration or E-LMI starting up and requesting information. The result is that E-LMI will not have the most up to date information to report to the CE device.), (Recommended Action: To trigger a replay of information between E-LMI and CFM, try restarting the CFM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VLAN_EA-3-MAX_VRRP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Configuration failed because the maximum number of VRIDs which can be programmed has exceeded.), (Recommended Action: Please capture the complete error log. Please check the data sheet for the supported configuration. Please contact TAC for any support on this)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_0_PKT_MINLEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-BADCOUNT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The actual number of paths for a prefix is less than the successor count. The problem may resolve itself the next time any event like packet reception occurs for that prefix. To see if the problem is resolved or not, check the number of successors in EIGRP topology output of that prefix.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-UNSUPPORT
### Response:
(Severity: 3), (Category: L2), (Description: Unsupported CPP TYPE.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-ERR_MEM_ALLOC
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failure in Inventory Manager memory allocation error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-INIT_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: The process will automatically exit and will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-AUTO_ABORT_TIMER_EXPIRED
### Response:
(Severity: 2), (Category: INSTALL), (Description: The auto-abort timer has expired, reloading the router/SDR.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIO-7-ERR_ECM
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The EIO Library encountered ECM error, therefore failed to send pulse. The System Manager process (sysmgr) will automatically respawn the annunciated process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRMS-3-OUT_OF_MEM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SRMS is out of memory. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Restart SRMS process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN central services feature?
### Response:
The MPLS VPN central services feature allows MPLS VPN providers to offer centralized services, such as Internet access, to VPN customers. It enables traffic from VPN sites to be routed to a central site for services before reaching its final destination. Central services VPNs are implemented using route targets and BGP route importation at the central services PE router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: CCSQ Event Manager notify error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL_ENS-7-OPERATION_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_UNQUAL_OPTIC
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when an CISCO unsupported optic is inserted any of the satellites ports.), (Recommended Action: Please use CISCO supported optics.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-HEARTBEAT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Heartbeat failure notification from NPUS was received by the Services PLIM driver or a critical error occured in the thread monitoring heartbeat from NPUS.), (Recommended Action: Do warm reload of the Services PLIM MSC. If the issue persists do a cold reboot of the same. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_SOCKET-2-MSG_ERR_GET
### Response:
(Severity: 2), (Category: L2), (Description: A very rare event where a message read was errored. The error should not be persistent.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect the required_info, if the message persists across multiple recreates.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC_CTRL-6-CONTROL_LINK_FAILURE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The system has detected that the control links connecting the Primary and Backup racks of the Clustered system are not functional. Since XR cannot operate without the Primary DSC node, and a new one cannot be declared, this rack must be reloaded.), (Recommended Action: If this condition persists, check the physical connections between the RSP nodes connecting the racks. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_UPDOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface has changed operational state.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status state' \ interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-3-GET_NODEID_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA driver failed to obtain either its node ID or extract rack/slot/instance information (having obtained the node ID).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-NODE_STATE_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Inventory Manager output this informational message whenever there is a card state change. This message will indicate the current card state.), (Recommended Action: This is a INFO message that a particular card state has changed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-BAD_HEAPIDX
### Response:
(Severity: 7), (Category: HA), (Description: Internally heap pointers are kept as offset indices. A given heap index was found to be outside the heap.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STREE-4-MSGSEND_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: stp_process is most likely in a bad state or basic system services have failed. stp_process error messages are generally indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.), (Recommended Action: Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-INIT_MEDIA_DEV_ERROR
### Response:
(Severity: 4), (Category: MEDIA), (Description: An unexpected media device error condition encountered during booting up from media), (Recommended Action: Collect system log information. Check that the media device and path are correct and that they exist and are accessible. Execute show media command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-UNSUPPORTEDARG
### Response:
(Severity: 3), (Category: MGBL), (Description: 'left/right argument is of unsupported type'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-STATS_ALLOC_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature EA DLL failed to allocate statistics entry for ACL. Number of ACL entries requiring statistics entries has exceeded statistics entries reserved for security ACLs on this line card. As a result, per ACE hardware accouting for the failed ACL entries is not available. There is no impact on ability to apply security ACLs in hardware.), (Recommended Action: If per ACE hardware accouting is needed for ACL in error message, reduce security ACL configuration on this line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CFG_APPLY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The CFM Global Manager or the CFM Daemon on the specified node was unable to enact a set of valid configuration changes. Future configuration changes may be adversely affected and the protocol is likely not to operate as intended. The problem could be caused by a system resource issue.), (Recommended Action: Attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cgm' or 'process restart cfmd' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_UI-4-INVAL_DATA
### Response:
(Severity: 4), (Category: APP_INFRA), (Description: The policymgr ui library received invalid data from the user interface. Ideally this should never happen and would be caused only by a bug in the code.), (Recommended Action: Try exiting and re-entering the config mode. If this doesn't help try restarting parser_server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-1-ABORTING
### Response:
(Severity: 1), (Category: HA), (Description: The system is experiencing CPU Hog, If this condition persists for 30 seconds, the node will be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JBI-7-DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a debuging message from the altera JTAG player), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-ERR_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 show memory summary </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> show memory location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMLOG-3-TOOBIG
### Response:
(Severity: 3), (Category: OS), (Description: A process attempted to malloc more than the maximum size of 16MB), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-NODEID_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: An error happened for a nodeid operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-LOW_VOLTAGE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP voltage less than or equal to the low voltage warning threshold. The SFP is the pluggable optics on the line cards. The voltage threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-BACKUP_MPAFPGA_LOADED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Backup MPAFPGA images has been loaded on the indicated card. This can happen when card manager detects that the Primary image is corrupted, and the HW fallbacks to load the backup image to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected MPA for MPAFPGA to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-API_INVALID_SLOT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information indicating the invalid slot number), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPDRIVER-3-SBM_DMEM_MULTIPLE_BIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that during initialization the SBM SPICO DMEM for the indicated ring and NP had uncorrectable bit errors in instruction memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of using 'install disk-mirroring' in Cisco IOS XR?
### Response:
The 'install disk-mirroring' command in Cisco IOS XR is used to configure disk mirroring for redundancy, ensuring data is copied across multiple disks for fault tolerance.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPT-3-FILTER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CPT filter error message. %s- Filter Name. %s- Target Name. %s- RSC Name.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-BADCHKSUM
### Response:
(Severity: 6), (Category: ROUTING), (Description: OSPFv3 has detected a checksum error in an LSA due to memory corruption.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 database - show ospfv3 database database-summary - show ospfv3 <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER_MARK-7-NOT_FOUND
### Response:
(Severity: 7), (Category: OS), (Description: The request for a page to be unmarked came, but no such marking was found in the reference array.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_EDM-3-SYSDB_BIND_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to connect to SysDB while starting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NO_PLIM
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message informs the user that the linecard will not be powered on because there is no PLIM inserted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-SEND_PDU_TO_ISIS_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS was not able to send non-Hello class PDU to ISIS. This could be because of communication problems between CLNS and ISIS.), (Recommended Action: If this message is seen during transient conditions, for example when ISIS is restarting either because of install operation OR because ISIS crashed then it is not harmful. If the error message says out of memory, it is because of the queue between CLNS and ISIS being FULL which could either be because traffic rate is very high or ISIS might not be reading the packets. If it is seen under steady state conditions or re-occur then contact cisco-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD-6-RESTART_SELF
### Response:
(Severity: 6), (Category: SERVICES), (Description: The Service Director encountered an error when trying to send a control message, which could leave the system in an inconsistent state. The error results from an unexpected failure in the transport infrastructure. The process is now restarting and will then be able to resynchronize its state, restoring system consitency. This message is for informational purposes only, and no further action is required as a result. On completion of the resyncronization, the system will have self-healed, unless any further errors are encountered.), (Recommended Action: No action is required unless further errors are observed. If further errors are encountered, wait until possible root problems (such as node reload, or low memory conditions) have been resolved, and restart the Service Director. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAN_SYNC_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 chan sync error on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-1-ERR_WRONG_CHASSIS
### Response:
(Severity: 1), (Category: FABRIC), (Description: MINIQ Version 2 chassis type do not support sea/superstar based fabric cards. MINIQ Version 1 chassis type do not support superstar based fabric cards. This is because of unsupported backplane in these chassis.), (Recommended Action: Replace the chassis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-3-CERR_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-OBFL_CACHE_OVERFLOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received UART message.), (Recommended Action: restart canb-server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-MEM_WRITE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to write to memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-COMMS_RETRY_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A Frequency Synchronization process has failed to send a message and attempts to retry the send have also failed.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_EA_OOR-4-NP_FLOWS_OOR_RED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Performance traffic monitoring has encountered an out-of-resource condition. Performance traffic monitoring process on the linecard has detected that the number of flows being monitored on a NP has reached maximum capacity. New flows will no longer be learnt), (Recommended Action: Reduce the number of flows being monitored on the NP. This can be done by 1) Modifying ACL: (a) Remove the performance traffic service policy from the interface (b) Modify the ACL used in the service policy to be more specific to match a smaller set of flows to be monitored (c) Reapply the service policy to the interface 2) Moving monitored flows to a different interface on a different NP)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-CONNECT_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: The Linux Packet classifier failed to establish a connection to the GSP messaging group, after multiple retry attempts. It will continue to retry, but the Linux packet path will be unable to handle traffic until a connection is established. The XR packet path should be unaffected.), (Recommended Action: Periodic attempts to connect will continue to occur. If this message continues to be seen, it may indicate a problem with GSP. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-6-INFO_PULSE_CODE
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal error occured because an unsupported pulse code is received.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX-2-CONFIG_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There was an fail during PEX (PCIE Switch) driver configuration.The error message has detailed information. Config fail will usually result in process restart in an attempt to configure the PCIE server.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-FAILOVER_REQUESTED
### Response:
(Severity: 4), (Category: HA), (Description: Redcon on the active card has been told to failover by request), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM_PLATFORMS-2-ERR_IFH_STS
### Response:
(Severity: 2), (Category: L2), (Description: Error in cem operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: LICENSE), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_LOSS_OF_SIG
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-6-FUNC_ENTRY
### Response:
(Severity: 6), (Category: L2), (Description: An info regarding a particular method getting hit in atm_vcm. It eases the debugability part and has no functional/ operational impact.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-SHUTDOWN_DELAY_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to get the clocktime, reload is proceeding without any delay.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-BIQ_EMPTY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects BIQ_EMPTY and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-OPERATION_WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The particular operation mentioned in the message occured due to some reason. This may be a serious failure, however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Give CLI:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-4-SELF_TEST_HOST_ADMIN_MISMATCH_MSG
### Response:
(Severity: 4), (Category: INFRA), (Description: The install software component has detected that the local installed software on host and sysadmin are not same relative to the software installed on the rest of the system. This event may be caused by the reloading the sysadmin after system upgrade or ISSU without doing install commit. Install component will try to auto correct this issue.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-INTRFC_STATE_QUERY_FAILED
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-FILE_IO
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to read/write the file), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR7
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-7-REPOPULATE_SHADOW_REQUIRED
### Response:
(Severity: 7), (Category: MGBL), (Description: Configuration accepted by the actual verifier processes was rejected when writing it into the shadow namespace. An attempt will automatically be made to repopulate the shadow namespace to bring it back in step with the actual configuration.), (Recommended Action: The Central Configuration Validator (CCV) will attempt to repopulate the shadow namespace and will report a further message indicating any further failures (with suggested recovery steps) or reporting that the repopulation was successful.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-ATTACH
### Response:
(Severity: 3), (Category: MGBL), (Description: An ATM VCCLASS consumer has attempted to attach an unknown vcclass to its interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-PROC_EXIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLDP-5-ENABLED
### Response:
(Severity: 5), (Category: ROUTING), (Description: MLDP has been enabled by configuration.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM_EA-3-BATCH_INTERFACE_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The FR VCM EA process has detected an error during messaging. Possible memory corruption or out of resource.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-1-PLANE_UPDOWN
### Response:
(Severity: 1), (Category: FABRIC), (Description: If the plane is reported down other than when administratively brought down, it means that the sprayer cannot reach *any* destination on the plane. This is a symptom of too many other fabric errors (DESTINATION_UPDOWN) than an error itself. The plane can no longer be used to send any traffic. If the plane is reported mcast_down, it means that certain fabric destinations are not reachable on this plane.It is still good for unicast traffic, but for destinations which are reachable on this plane.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-INCORRECT_IDB
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was supplied with a plim interface that does not have an idb yet.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-RX_BAD_ADDR_TYPE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Invalid address received from peer for given address family.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_DIR-3-PREVIOUS_UPGRADE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The ISSU infrastructure has identified that a previous sysadmin ISSU operation has failed. The system must be reloaded in order to recover to the committed version.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR1_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-1 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TS_LS_PWM_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a pwm bit error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_EDM_NOT
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_5_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COPYMIB-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: No memory to perform edm or bag operations.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-3-BGP_MULTIPATH_PIC_RELOAD_REQ
### Response:
(Severity: 3), (Category: FABRIC), (Description: If the hw-module command is used to configure BGP MULTIPATH PIC CORE and router is not reloaded, there will not be any effect.), (Recommended Action: In order to enable BGP MULTIPATH PIC CORE, the router must be manually reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-GR_NBR_ID_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: A previously known GR peer has reconnected with a new ldp-id. This message appears only if the <Bold>mpls ldp log graceful-restart<NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISSU_EVENT_BLOCK
### Response:
(Severity: 3), (Category: INSTALL), (Description: Issu thread failed while waiting for incoming events. Issu operation process will exit with failure. Node may be reloaded.), (Recommended Action: Retry the issu operation.If error persists. contact tac with 'show tech-support issu'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-SCHEDPARAM_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver was unable to set the parameters of the interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD-3-LOOP_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: An unexpected error has been encountered in the main Service Role Daemon event loop. The Service Role Daemon will be automatically restarted, and should recover by itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-UPDATE_DISCARDED
### Response:
(Severity: 7), (Category: HA), (Description: During failover/switchover old active has not gone standby yet and sends update to the new active. These updates need to be discarded and success needs to be returned. Log is used in case debugging is required to check what type of update has been discarded.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-6-UPDATE_START
### Response:
(Severity: 6), (Category: L2), (Description: The FPD update update operation has started for the specified image.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_UI-3-NOMEM
### Response:
(Severity: 3), (Category: APP_INFRA), (Description: The node which logged this message is running low on memory and the requested operation could not be completed.), (Recommended Action: Either reduce the configuration applied on this node or increase its memory. If the error is persistent, contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_NB_SERDES_6_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data north bound serdes link 6 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-3-SFP_I2C_TM_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Port controller driver detected I2C timeout error on SFP port.), (Recommended Action: Ensure that the SFP plugged in is supported. If not, please replace the SFP. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-LTRACE_INIT_ERROR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that LDA failed to initialize the internal debug tracing. While this doesn't affect router functionality, it does limit the ability to debug failures in the LDA and LC driver subsystem.), (Recommended Action: No urgent action is required for this message. However the issue should be addressed by performing a process restart at a convenient time such as next available service window.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOMAHAWK-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Tomahawk RP Kensho-JF CPU Subsystem DLL warning message. No system functional impact.), (Recommended Action: Nothing. Reporting normal progress of Tomahawk RP Kensho-JF CPU Subsystem DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-4-CHKPT_ITERATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MRIB encountered error while trying to iterate through the checkpoint records. This error may occur during - starting an iterator - finding next record in the iterator - ending an iterator), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-3-LOWER_FANTRAY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: As shown in the message.), (Recommended Action: Physical OIR of lower fan tray required to recover from this hang.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-DDR_BUS_BIT_STUCK_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: DDR bus databit stuck on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMACTRLR-3-PORT_NOT_CREATED
### Response:
(Severity: 3), (Category: L2), (Description: IMA controller port was not created. This can occur under the following instances, * when the initialization of IMA controller fails. * when the IMA controller and IM(interface manager) interaction init fails. * when the create IM data for the IMA port fails.), (Recommended Action: Collect the following outputs, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ima trace location <>/<>/<><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ima trace location <>/<>/<><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controller MgmtIMA <>/<>/<><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controller MgmtIMA <>/<>/<><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show run controller MgmtIMA <>/<>/<><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show run controller MgmtIMA <>/<>/<><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support pfi<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support pfi<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Remove and Re-apply the IMA controller configs. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR_HELPER-4-INIT_ERROR
### Response:
(Severity: 4), (Category: MEDIA), (Description: An unexpected init error condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-4-PCIE_LINK_ERR
### Response:
(Severity: 4), (Category: INFRA), (Description: The PCIe Link betwen the PCIe bridge on the SC card and the PCIe Bridge on the SW card is not up even after driver attempted reset and recovery actions. The driver triggers a critical fault to be reported to the Fault Manager asking it to reload the SC card on which its running and if it is local, then SW card also.), (Recommended Action: No action is required from the operator.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_NETIO-7-BAD_ARP_DROP
### Response:
(Severity: 7), (Category: ROUTING), (Description: MPLS slowpath got a packet for which ARP needs to be done, but, it doesn't have the nexthop needed. The pkt is dropped.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP AS path filtering in IOS XR?
### Response:
BGP AS path filtering in IOS XR is configured using route-policies to match and manipulate routes based on their AS path attributes. route-policy AS-PATH-FILTER
if as-path in AS-PATH-SET then
drop
endif
end-policy
router bgp 65000
neighbor 203.0.113.6
route-policy AS-PATH-FILTER in
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-MMAP_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: mmap pdma descriptor failed.), (Recommended Action: Check the error code and contact infra team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-MMAP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error when mmap memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - show shmwin <win_id> participant list - show memory <jib of process> location 0/x/CPUx - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-3-EDM_ERR_CODE
### Response:
(Severity: 3), (Category: MEDIA), (Description: Capture EDM errors for reboot history with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GE_DMAC-3-MLAN_LINK_STATE_CHANGE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The internal link interface for the specified port is down.), (Recommended Action: Gather the data listed in 'required_info'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PORT_STATE_CHANGE_LINK_DOWN
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message indicating that the physical link state of the specified port has changed to down.), (Recommended Action: This is an informational message and does not necessarily indicate a problem. The port's physical connection should be checked if an unexpected status change occurs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ACCESS_FAILURE_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_2_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-6-ERR_2
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with two prameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-1-FATAL_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an severe error message in the OFA module to indicate that an error was seen during init operation.), (Recommended Action: Please collect the console log, OFA traces (show ofa trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ND_REQUEST_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A request to resolve IPv6 next-hop addresses failed for the specified error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_0_OFLOW_FIA2BR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-0 FIA to bridge instance-2 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-INTERNAL_LIMIT_OIDS
### Response:
(Severity: 4), (Category: SNMP), (Description: SNMP agent recieves more than 75 requests at a time from NMS leading to buffer pool exhaustion blocking all the upcoming OID's leading to timeout.), (Recommended Action: Kindly reduce the number of oids per request to avoid request timeouts)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-XGXS_DTE_SYNC_ERROR_THRESHOLD
### Response:
(Severity: 2), (Category: L2), (Description: The PLA MAC xgxs DTE layer went down due to loss of sync or lane alignment. The daily event threshold was crossed so the serdes was reset. The traffic may start getting dropped after this error message.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-4-WARNING
### Response:
(Severity: 4), (Category: L2), (Description: A non-fatal error occured while executing the function in question. The message contains info about the cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of SONET APS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-6-INFO
### Response:
(Severity: 6), (Category: OS), (Description: Informational messages only.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-2-RACK_DOWN
### Response:
(Severity: 2), (Category: FABRIC), (Description: This message indicates LCC or fabric rack has been removed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-NSR_STATE_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: BGP changed its global NSR state.), (Recommended Action: This informational message appears when BGP changes its global NSR state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-SELECT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Select failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is inserted properly if it is externally accessible. Capture 'show media' and 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel selection metric feature?
### Response:
The MPLS TE tunnel selection metric feature allows the configuration of the metric type to be used for tunnel path calculation and selection. The default is to use the TE metric which is carried in TE LSAs. Alternatively, the IGP metric can be used which is the normal OSPF or IS-IS metric. This provides flexibility in optimizing tunnel paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_OPTICS_SW_HW_INCOMPATIBLE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-PTHREAD_CREATE
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to create exec's event handling thread), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_PKT_MINLEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-4-PORT_NOT_PRESENT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Port will not operate reliably), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_11
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_BAG_DECODE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in FIB MPLS. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show memory location <> show cef trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE2_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE2_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_CPATH_PROTECTION_READINESS_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: Protected CPATH readiness has changed for a particular SR Policy), (Recommended Action: If the protection readiness is down, then it means that dataplane may dropping traffic in the event of active path breakage. If the protection readiness is up, then it means that a backup CPATH for the given policy is tested and ready to handle path breakages.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_DSC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Server encountered DSC error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-6-PROBLEM_EXITING
### Response:
(Severity: 6), (Category: SERVICES), (Description: The process implementing service diversions (eg for virtual firewalls) has just exited, since the last service attachments have just been deconfigured. As part of this orderly shutdown, the process tried to inform System Manager that this was happening, but hit a problem in signalling this fact. The system should have recovered from this problem fully; however, very rarely it is possible that some other service attachment configuration in the same commit could be rejected.), (Recommended Action: If any service attachments in the same configuration commit were rejected, simply re-commit them.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Quality ITU-T Option 1 does not support SONET framing, only SDH framing.), (Recommended Action: If SONET framing is required, need to change quality ITU-T to Option 2)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_24
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt link failed), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set RSVP message pacing in Cisco IOS XR?
### Response:
To set RSVP message pacing, use the 'rsvp message-pacing' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp message-pacing
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_EOP_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered interlaken Rx missing EOP error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-VETO
### Response:
(Severity: 3), (Category: INFRA), (Description: When notified about this install operation, one or more IOS-XR processes vetoed the operation. The operation cannot proceed further.), (Recommended Action: Examine the reasons given for the veto or vetoes, take any recommended actions and try the operation again. The full set of reasons is recorded in the install operation history.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-SRV6_CAP_COMPILE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unexpected error while parsing SRv6 capability subTLV in an incoming LSP The problem is unexpected and most likely to be an internal programming error. Most likely the ISIS LSP database will no longer reflect the true status of the network), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHUTDOWN
### Response:
(Severity: 7), (Category: SYSDB), (Description: A SysDB server process has performed a graceful shutdown and will be restarted.), (Recommended Action: Check to make sure the process has restarted. If not, restart manually. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-SCHEDULE_IS_REMOVED
### Response:
(Severity: 6), (Category: DIAG), (Description: The scheduled online diagnostic tests are no longer configured. This message usually appears after a scheduled test is removed by the user or a card is removed from the chassis.), (Recommended Action: If you want the scheduling tests to be removed, do nothing. If you want the scheduled tests to still be run, reconfigure the scheduled tests.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-7-ERR_EXIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An error occurred in BPE Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the process keeps restarting ,reload using CLI Command in admin mode - reload location <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-4-JID_GET_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: process's JobID can not be obtained), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_PCL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an unexpected error whilst performing the specified using the Route Policy client library. As a result information may be omitted from the local system's LSPs. This may be due to a low-memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_MCAST_SIZE_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: The multicast address requested for the specified interface is larger than the maximum permissible size. This requires restarting the IS-IS process.), (Recommended Action: Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TUPLE_PACK
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to tuple_pack() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC13
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-1-FANTRAY_FAILED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This mesage indicates more than one fan failed on the mentioned fan tray), (Recommended Action: RMA the failed fan tray)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_TEST-3-ERROR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-6-INFO_LOG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV_DPM-4-ADJ_FAULT_NOTIFICATION
### Response:
(Severity: 4), (Category: ROUTING), (Description: During an iteration of DPM a fault was detected. For more detailed information regarding faults, view 'show mpls oam dpm adjacency fault'), (Recommended Action: Forwarding over the given adjacency may not be deterministic nor stable. We recommend running 'show mpls oam dpm adjacency fault' to determine all faults discovered thus far. If any are unexpected, review the control plane expectations and investigate the extent of the forwarding fault.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-AAA_STRING_TASKID_CHECK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Special taskid string check against user taskmap failed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-BUILD_TABLE_FAIL
### Response:
(Severity: 3), (Category: INSTALL), (Description: Unexpected null string.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-2-MUTEX_INIT_FAILURE
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fia driver mutex initialization error), (Recommended Action: Try reloading the fia driver If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-DISKSPACE_CHECK_PASS
### Response:
(Severity: 6), (Category: INSTALL), (Description: The device now has enough diskspace for install code to proceed.), (Recommended Action: No action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are BGP peer groups and what are their benefits?
### Response:
A BGP peer group is a group of neighbors with the same update policies. Update messages generated for one member of a peer group are replicated for all other members. Benefits include conservation of memory and CPU resources, configuration simplification, and faster convergence.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_FIB-3-ATTR_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the SSE FIB to indicate that engine layer identified an error with attribute passed by upper layers), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBC-3-CANBUS_FANTRAY_INRUSH_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CBC has detected that the inrush fantray has failed. This will result in the LCs getting overheated. Please turn off power to the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-7-BPM_CHKPT
### Response:
(Severity: 7), (Category: ROUTING), (Description: The BPM failed to record the allocation in the checkpoint table. This could cause operational problems if the BPM is later restarted.), (Recommended Action: No further action is necessary unless the BPM restarts. In that case, if problems are seen it may be necessary to deconfigure BGP completely and then reconfigure it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_SBE_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA10 burst FIFO single bit error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COND_DEB_RP-3-INSUFMEM
### Response:
(Severity: 3), (Category: SECURITY), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-THREAD
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in a thread during an operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-PARAM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An unexpected parameter inconsistency has been detected in the hardware abstraction layer of the Forwarding information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE interarea tunnels feature?
### Response:
The MPLS TE interarea tunnels feature allows MPLS TE tunnels to be established across IGP area boundaries. This enables TE to operate in multi-area environments. Interarea TE tunnels comprise hops in different IGP areas and are signaled as a contiguous end-to-end LSP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-LRD_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when using a logical router daemon api), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-3-MSG_INVENTORY_FWD
### Response:
(Severity: 3), (Category: HA), (Description: LRd was unable to read or write information needed to forward inventory in Admin space to the LR Plane.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_RESYNC_SCHED_IIR
### Response:
(Severity: 4), (Category: L2), (Description: An attempt to schedule a resync with IIR has failed for this bundle. The safest course of action is to restart the process and this has been done.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-BAD_LWM_VERSION
### Response:
(Severity: 7), (Category: OS), (Description: An error was received while processing a request from a local process. There could be a version mis-match or corruption in the client process. The error message should provide some clue to the problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does System Manager start and manage processes on IOS XR?
### Response:
System Manager starts processes based on the configuration in their process startup files. These files specify process name, path, instances, startup conditions, criticality, and placement. Sysmgr monitors each process and restarts it according to the restart policy if it fails. It can also start processes dynamically when certain config is committed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_FRAME_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Decoder A framing error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-2-RSYNC_FAILED
### Response:
(Severity: 2), (Category: INFRA), (Description: The IOS-XR appmgr has failed to sync files to the standby node. In order to bring the node back into sync, the following steps can be taken: - Restart the process appmgr on the active RP. This will force a resync. - If restarting the appmgr process results in the same message being displayed, the standby node should be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-7-IFH_ERR
### Response:
(Severity: 7), (Category: L2), (Description: 'Receive a message with wrong interface handle. This may be ignored.'), (Recommended Action: Ignore)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-NO_VLDN_METADATA
### Response:
(Severity: 4), (Category: MGBL), (Description: This failure indicates that either there were no validation metadata files found, or none could be loaded successfully. Config validation will not be possible for any configuration until this condition is resolved.), (Recommended Action: The failure to find or load the metadata should be investigated, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-6-LATCHING_SESSION_STOPPED
### Response:
(Severity: 6), (Category: L2), (Description: A best-effort attempt to stop a session has been made. If an error occurred in cleaning up the session on a particular LC the SESSION_NOT_STOPPED message will be generated on that LC.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-MGD_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the ELMI process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-3-ERR_SYSMGR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Allocator encountered the annunciated sysmgr error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-4-CERR_REGISTER
### Response:
(Severity: 4), (Category: SECURITY), (Description: locald failed to register error codes.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to specify RSVP hello intervals?
### Response:
To specify RSVP hello intervals, use the 'rsvp hello-interval' command in interface configuration mode. RP/0/RSP0/CPU0:router(config-if)#rsvp hello-interval 10
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-SPA_SELF_DESTRUCT
### Response:
(Severity: 3), (Category: L2), (Description: This is an error message indicating a Hardware access error for a SPA. If this is a recurrent message, it usually is due to faulty hardware, loose connection at the SPA connector on the jacket card. Try reseating the SPA and see if the issue is resolved. If not, please check with TAC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FAA_FA_CB
### Response:
(Severity: 3), (Category: SECURITY), (Description: An error occurred in FAA or associated services whilst it was attempting to process the creation, update, or removal of default failure action configuration for a Virtual Firewall. More information on the course of the failure is contained in the message.), (Recommended Action: If the error message indicated that a lack of resource was to blame for this error, make more resource available on the indicated node, then restart the rspp_ma process on this node using the 'process restart' command. Otherwise, roll back the configuration change, wait 10 seconds, then re-apply the configuration. If the error is still seen, restart the RSPP MA process on the node indicated using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-INSTALL_READY_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The attempt to notify install manager of install complete failed. If this is the initial startup, there should be no side affects. If this is the result of a software upgrade/downgrade, it is likely the process will be restarted by sysmgr after a timeout period.), (Recommended Action: Check the install logs if all the packages are downloaded and install operations completed properly Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_MGR-3-ECM_ERROR_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The SVII Adjacency Manager encountered an error while calling AIB. Normally, it would recover from this error. However, a secondary failure has occurred while invoking the recovery mechanism. After this error, packets may not be forwarded correctly for some service virtual interfaces.), (Recommended Action: The system can be recovered by restarting the 'svi_adj_mgr' process on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-5-RELOAD_EVENT_CANCELLED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates that a previous delayed reload event is being cancelled due to multiples ungraceful reloads on the indicated node.), (Recommended Action: *none*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-7-ERR_CREATEMQ
### Response:
(Severity: 7), (Category: ROUTING), (Description: The process failed to create a message queue to communicate with MPLS.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-3-FMEA_FAULT_NORELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FMEA Event. Details as per format string.), (Recommended Action: The board will NOT be reloaded. At this stage please collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-6-CONN_UNREG
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-THRESH_RESET_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in clearing asic-error threshold for a particular error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-MAP_SERVER_REGISTER_AUTHENTICATION_FAILURE
### Response:
(Severity: 5), (Category: IP), (Description: 'Map-server failed to authenticate map-register for ' 'EID prefix. This is potentially caused by different ' 'shared keys configured on ETR and map-server.'), (Recommended Action: 'Ensure ETR and map-server have the same ' 'configured shared key.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-NO_OPTICS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-6-ENFORCE_GRACE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled in grace period.), (Recommended Action: The customer may consider to purchase licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-0-EMERG_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: PLATFORM FIB, Tomahawk specific init error), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-6-ENFORCE_OVERAGE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The customer has purchased one or more of these licenses from Cisco and all of those licenses are already in use.), (Recommended Action: The customer should consider purchasing more licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-4-CONFIG_GEN_ERR
### Response:
(Severity: 4), (Category: MGBL), (Description: Generation of configuration in ASCII format has failed. During periodic backup operation this may lead to internal backup files not getting updated with recent config changes), (Recommended Action: For a system initiated ascii generation please run 'show running cache refresh' in SDR mode. Look for similar IOS messages for additional recommended actions. Collect the show logging output, console logs, tracebacks, show nvgen trace output, show runnning output, show config history and show tech-support sysdb.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-SHM
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred that prevented the FIB from working properly with shared memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-INSUFFICIENT_PERMISSIONS
### Response:
(Severity: 3), (Category: IP), (Description: A non-root user has attempted to perform an XR socket operation which can only be performed by root users.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-ERR_BAG_REG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: EDM Bags are used to share information between components using sysdb. This Error indicates that bag registration failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_INFO
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_SHUTDOWN_NAME
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP refresh reduction?
### Response:
To configure RSVP refresh reduction, use the 'rsvp refresh-reduction' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp refresh-reduction
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-ERR_MAC_RELEASE
### Response:
(Severity: 5), (Category: L2), (Description: After a resync with the MAC address allocation server, the Bundle Manager process found that it had more MAC addresses than required by the bundle configuration settings and tried to release some to the server. However, this operation failed, so these extra MACs were kept in the Bundle Manager allocation. This is not an issue unless there is a shortage of MAC addresses for another feature (e.g. Interflex).), (Recommended Action: If there is no other feature that is short of MAC addresses, no action is required. Otherwise, try adding and deleting an additional Bundle-Ether interface (with no members). Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-INVALID_MHOST_DEFAULT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-SE_PROFILE_CONFIG_REJECTED
### Response:
(Severity: 2), (Category: FABRIC), (Description: SE MDB profile cannot be configured on non-TCAM devices), (Recommended Action: Un-configure SE MDB profile hw-mod CLI in the device)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-UNEXPECTED_NODE_DURING_OP
### Response:
(Severity: 2), (Category: INFRA), (Description: The IOS-XR install infrastructure detected that a remote node has started running IOS-XR in the system. However, since the node is not involved in the install operation, it should be kept out of service until the next install commit is been performed. This situation may occur if a node is reloaded during an install operation, or if a node error occurs during the reload stage of an apply by reload operation. Note that: - This reload is automatic, and does not involve any user intervention. - The node in question will be out of service until the re-imaging process is complete. - The re-imaging process will not complete until 'install commit' is issued - After the re-image, the system should be restored.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_UIDB-3-MNGR_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: The process exiting because of failure in uidb manager.), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure uidb <interface name> input base location<>*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_1_FIADDR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-1 from FIA DDR on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-PROGRESS_ERROR
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The satellite has indicated an error has occured when attempting the requested install operation.), (Recommended Action: If the satellite is retrying, no action is needed. Otherwise, the install operation should be aborted and retried if necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-MUTEX_OP_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The packet subsystem failed to perform the specified operation on the specified mutex. This usually indicates a programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_COMPLETE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Hard reset recovery action is complete and the network processor is operational.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-BASE_CAPS_LU_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The Interface Manager returned an unexpected error when CLNS attempted to lookup an interface's base capsulation type. This may be a resource problem but is probably an internal error.), (Recommended Action: Consider restarting the CLNS and/or Interface Manager processes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-PARAM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An illegal parameter has been passed to a function in the IPv4 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_0_OFLOW_NPU2BR_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-0 NPU to bridge instance-3 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-OLD_IDPROM_FORMAT
### Response:
(Severity: 3), (Category: DRIVER), (Description: Outdated IDPROM format is being detect for the indicated card. The card will not operate correct without being upgraded to use the TLV format.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-3-CHAN_CREATE
### Response:
(Severity: 3), (Category: L2), (Description: Failed to create marvel-test (driver) channel using event_manager_create.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-5-DISJOINTNESS_STATUS_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: Disjointness status has changed. This can happen for example if the PCE cannot meet the requested disjointness type and has to perform fallback, or when a disjoint group that was previously in fallback mode recovers and the requested disjointness is satisfied once again.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-ALARM_INDICATION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Alarm indication received from Roulette. This may be a serious failure (example: power sequencer failure), however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Provide the following CLI: (admin)# show env Use the pid from canb-server output to look for matching pid in the pfm output. If the alarm indication does not clear within 30 minutes, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_MGD_TIMER
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PPPoE MA process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-POLICY_WARNING
### Response:
(Severity: 3), (Category: QOS), (Description: Bandwidth over subscription is supported only on single priority across subinterfaces. process ltrace will have more information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_UCORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory uncorrectable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-INIT_ERROR_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a debug message in the NP Driver to indicate an operation or condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-DEBUG_SCRIPT_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: Debug scripts are collected to preserve diagnostic information following an event triggering the abort of the ISSU operation. Failure to collect the diagnostic data may make triaging the abort event more difficult and the ISSU operation should not be cleaned up until the abort has been manually triaged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-UPDATE_CHASSIS_PROM
### Response:
(Severity: 4), (Category: DRIVER), (Description: Virtual Interface Mac pool start/end address has been configured in Chassis prom. This will provide the Mac addresses required in XR VM.), (Recommended Action: Use idprom_tool to upgrade the backplane IDPROM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS DiffServ tunneling modes?
### Response:
The MPLS DiffServ tunneling modes define how the MPLS experimental (EXP) field is treated when IP packets enter an MPLS tunnel. The pipe and short-pipe modes preserve the original IP precedence. The uniform mode allows the IP precedence to be overwritten by the MPLS EXP value. It is configured with the tunnel mpls traffic-eng exp command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-THRESHOLD_BREACHED
### Response:
(Severity: 4), (Category: INFRA), (Description: The specified SLA threshold has been breached in the current bucket and the corresponding action has taken place.), (Recommended Action: The breaching of this threshold indicates that the performance of the network has dropped below the configured threshold level. The cause of this performance degredation should be investigated and fixed so that the threshold can be cleared.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-4-CLIENT_ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: ROUTING), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-7-REPLICATE_DPC_INVALID_COOKIE
### Response:
(Severity: 7), (Category: IP), (Description: IPv4 MA got an unexpected cookie for the specified interface. This failure indicates that the IPv4 data path feature may not programmed correctly.IPv4 MA tries to recover from this error by a timer based retry.If the message is not seen continuosly for a particular interface and if functionality looks ok, the recovery might have been successful.), (Recommended Action: Collect the output of show tech-support, show ipv4 ma trace, debug imp dpc, debug ipv4 events, debug im api job <> from the location the error message comes from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-REMOVE_OLDEST
### Response:
(Severity: 6), (Category: OS), (Description: Memory limitation.), (Recommended Action: This is an informational message. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-IDP_INTENT_VER_OLD_DISCARD
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'The device received an old intent file ' 'by Intent Distribution Protocol and is discarding it'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_1_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ERR_RETRY_TRANS_SPEC_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-ACT_RSP_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected inconsistency between raw and decoded active RSP signals.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is an internal initialization error.), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea. If the problem persists, copy the error message as it appears on the console and any noticeable side effects. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-MAP_SERVER_REGISTER_NO_CONFIG_EID_PREFIX
### Response:
(Severity: 5), (Category: IP), (Description: 'No site is configured to accept registration for EID prefix.'), (Recommended Action: 'Configure EID prefix in map-server site to ' 'enable registration.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-0-ASIC_ERROR_SHUTDOWN_BOARD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: An ASIC error has occured and board need shutdown.), (Recommended Action: An error has happened and board is shutdown. Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_CLIENT-3-SHMEM_CORRUPTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ethernet server detected shmem is corrupted for its client. This indciates there would be few packet loss and server will intialize the shmem to recover this condition. client will take care of retransmitting the packet.), (Recommended Action: 'None, Eth server will correct the condition by itself by Re-initializing the shared memory')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSPI_CAL_ECC_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TxSPI Calendar ECC multiple bits error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: FGID failed to allocate memory), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-IFH_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_PM-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The Platform Manager encountered a provisioning warning.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show log location <r/s/i> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show log location <r/s/i> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CLIENT-3-GEN_ERR_1
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered an Error in operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-INTERNAL_TRAP_QFULL
### Response:
(Severity: 4), (Category: SNMP), (Description: SNMP agent recieves trap requests from all the sub agents on a internal queue, then the traps are classified based on several factors and passed on to different set of queues.), (Recommended Action: It is possible that huge number of traps are generated if traps are enabled for routine or simple events. Collect the show logging output, console logs, error message and trap configuration for review.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_SCH_MEMP_ERR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Scheduler Hang, Sram or egress mid-fifo parity error on NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-ERR_ROUTE_HDR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv6_rib_batch_add_route.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-CONFIG_SCAN_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An unexpected error occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-V4_OR_V6_ROUTE_OP_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An attempt to do a v4/v6 route operation failed.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_HEARTBEAT_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected a problem in the internal state machine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-CHILD_EXIT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Child process exit for attach server. %d- pid of the child process.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-SYSCALL
### Response:
(Severity: 3), (Category: OS), (Description: The client library has failed a system call.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NOREASON_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the node has been reset but the cause is unknown.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIAD-7-MSGSEND_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to send pulse to resmgr thread to handle SIGCHLD), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture console log, 'show process pcmciad', 'show process blocked', and process core of pcmciad.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-6-INFO_UNMATCH_DIGEST
### Response:
(Severity: 6), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. Memory allocation failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_CONST_BP_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-1 is constantly backpressuring bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-4-SDR_PLANE_READY_TIMEOUT
### Response:
(Severity: 4), (Category: HA), (Description: SDR Plane ready is being signalled due to SDR plane ready timeout.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICYMGR-7-INIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-DBCTRL_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The line card daugher board control initialization failed.), (Recommended Action: The software will try to recover by reloading the line card. Copy the error message exactly as it appears on the screen and gather the output of the CLI 'show tech-support ethernet interfaces'. If the issue persists, contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX-2-ENTER_EVENT_LOOP_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There was an fail during PEX (PCIE Switch) driver evnet loop entry.The error message has detailed information. Entering into Event loop fail will usually result in process restart in an attempt to configure and PCIE driver event loop entry.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-SYSDB_CFG_BIND_OR_UNBIND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that bind/unbind to config namespace in SysDB has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-MESSAGING_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: An error occurred while handling a request from the management thread to the data thread; the data thread was not able to respond to the management thread.), (Recommended Action: The system may recover automatically. If the problem persists, it may be possible to recover by restarting the protocol process on the affected node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-SYSMGR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The process was initialized successfully but was unable to inform System Manager of the success.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_DIGEST_FILE_REINIT
### Response:
(Severity: 4), (Category: SECURITY), (Description: SAM found digest file missing from NVRAM, re-init the file.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-SEM_WAIT_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Semaphore wait failed while waiting for signal from AIB.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_EVENT_CONN_OPEN
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to open connection with event manager. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-HA_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: Used for logging of HA events like process startup, entry and exit of NSF/GR or NSR procedures and related events.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOPPER-3-Q_CREATE_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA process failed to create queue. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-6-WARNING
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general warning message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-6-BARBARIAN_VOLT_FIX_ACTIVE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: VP4 rail on the SPA is margined to nominal voltage due to SAR chip errata.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-DUPLICATE_PROCESS
### Response:
(Severity: 7), (Category: HA), (Description: An attempt to exclusive-create on a local channel failed. This indicates that there's already a copy of this same process running, and it cannot be allowed to continue, since corruption can result.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-2-SDK_TABLE_FULL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: DPA failed to install entry because of Table Full.), (Recommended Action: Please collect the console log, DPA traces (show dpa trace loc <>), show controllers npu internaltcam location 0/0/CPU0. The failure could be because we ran out of available banks. Report to your technical support representative for further details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-5-COMM_RESTORED
### Response:
(Severity: 5), (Category: LICENSE), (Description: Smart Agent communication with the Cisco licensing service is restored.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-POLICYCONFIG
### Response:
(Severity: 4), (Category: ROUTING), (Description: A problem was encountered while setting up route policy configuration. Some of the routing policy may not have been configured correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV4-7-DATALIST_FAIL
### Response:
(Severity: 7), (Category: IP), (Description: The sysdb process fails to find the address of a specified active interface or of all active interfaces.), (Recommended Action: This indicates a problem with getting the helper address. If the errors are seen continuously and you see problems with the helper address, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is seen only once/twice while some sysdb processes crashed or were restarted, this might be related to that. If you don't see any issue with the helper address thereafter, it is a transitory problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-0-NO_RSP_PRESENT_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: LC is unable to detect any RSPs in the chassis.), (Recommended Action: If there indeed is no RSP present in the chassis, then this is an expected message. If RSP is plugged in and powered on, and if this message appears, then contact support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_SKP-7-ERR_GEN
### Response:
(Severity: 7), (Category: ROUTING), (Description: MFWD-SKYWARP library encountered error during setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-INTERNAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal error occured in the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_MGR-3-SYSMGR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The process was initialized successfully but was unable to inform System Manager of the success.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SRGB_ALLOC_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error occured while attempting to allocate the segment-routing global block (SRGB) As a result, segment-routing is not functional at all. The most likely cause of this problem is that some other application (e.g. LDP, BGP) are using labels within the global block), (Recommended Action: Verify that there are no labels used by any application within the SRGB. If, after verification that no labels are used by any application within the SRGB, the error persists, restart the isis process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_REMOVE_BULK_OP
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string.), (Recommended Action: Check that the operation to remove exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA-7-INIT_FAILED
### Response:
(Severity: 7), (Category: IP), (Description: The indicated initialization of the MPA failed and the process restarted.), (Recommended Action: If the indicated error is about low memory, do the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Else, do the following action.Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-TMB_FULL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects TMB_FULL and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-BAD_VSA_LENGTH
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA format error found in radiusd while translating.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-INVAL_NODEID_POWER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the nodeid passed is not valid, and therefore the power-up request is being rejected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_EA-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: An error occured in the event loop. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_SYSDB_DATALIST
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while listing the contents of a directory in SysDB. This may be due to resource starvation or an internal software programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. The IS-IS process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-6-CONTEXT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message is for recording MPLS global context intialization event. No action is required.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-FSM_APPDATA
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: VPDN MGR failed process internal messages. This may be due to low memory conditions.), (Recommended Action: Allow the subscriber to reconnect. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VLAN_EA-3-CONFIG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This particular configuration is not supported on this platform), (Recommended Action: Please capture the complete error log. Please check the data sheet for the supported configuration. Please contact TAC for any support on this)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-2-RX_POWER_THRESHOLD_ALERT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Rx power threshold of higher than 30 should be set only for transceivers which are 3rd party optics. For cisco CFP2 transceivers it should be less than or equal to 30.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-QUEUE_STUCK_STATUS_INFO
### Response:
(Severity: 3), (Category: L2), (Description: Log the key asic registers when a queue stuck condition was detected.), (Recommended Action: No action is required. The driver will perform asic recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-RX_BAD_PDU_HEADER
### Response:
(Severity: 4), (Category: ROUTING), (Description: Received a bad PDU header from a peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_START
### Response:
(Severity: 7), (Category: INSTALL), (Description: The current operation could not start the transaction of items which are needed to activate it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-BADDLLOPEN
### Response:
(Severity: 3), (Category: MEDIA), (Description: DLL was not loaded after many retries. Will exit to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-6-SVC_INFO
### Response:
(Severity: 6), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SHUTDOWN
### Response:
(Severity: 3), (Category: SECURITY), (Description: System shutdown.), (Recommended Action: 'SUPPORT*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-4-PM_INPUT_TYPE
### Response:
(Severity: 4), (Category: LIBRARY), (Description: The power module input type changed.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MBR_BFD_NEIGHBOR_UNCONFIGURED
### Response:
(Severity: 5), (Category: L2), (Description: The BFD session on the member has transitioned to NBR_CONFIG_DOWN state, indicating that the configuration has been removed from the neighbor. The member will continue to transmit packets for as long as the message specifies, at which point, if the session has not gone back UP, the member will be brought down.), (Recommended Action: To stop the member from being brought down, rectify the inconsistency between the BFD sessions of the two neighboring routers within the specified time. EITHER, configure BFD sessions per-member on both routers OR remove the configuration from both routers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-3-DST_REG_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The SPAN Manager was unable to obtain the information required to replicate traffic to the destinations of one or more monitor sessions. It is possible that traffic will not be replicated correctly for the affected monitor-sessions. Standard forwarding will not be affected. Use 'show monitor-session status' to identify the affected monitor sessions and to provide more information regarding the current state of the affected destinations.), (Recommended Action: This message indicates a communication problem. Attempt to resolve any memory issues before trying to solve the problem by issuing 'process restart span_mgr'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-7-ERR_SYSDB_BAG_ENCODE
### Response:
(Severity: 7), (Category: L2), (Description: BFD Agent server encountered error in sysdb bag encode operation. This could affect output of some of the BFD CLI commands.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-UPD_BUFFER_SMALL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An allocated message did not have enough space required to format all the attributes of a prefix. When such an error encountered, a Withdraw message is generated for the prefix under consideration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an MPLS L2VPN pseudowire class?
### Response:
To configure an MPLS L2VPN pseudowire class, use the 'pseudowire-class' command to define encapsulation and control word settings. pseudowire-class PW-CLASS-NAME
encapsulation mpls
control-word
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOSS_OF_OUTPUT_PWR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_AVL_DELETE_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: A call into the IOS-XR AVL tree library failed. This may result in the firewall controller unexpectedly restarting after this message is seen.), (Recommended Action: If the process unexpectedly restarts, this will clear the problem; otherwise no further action is necessary to recover. In either case, please copy the message exactly as it appears on the console or in the system log, along with any subsequent messages relating to process restart and the information detailed below, and call your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBDLLMGR-6-OVERFLOW_REPLACE
### Response:
(Severity: 6), (Category: OS), (Description: An overflow encountered for the process. This is not an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_BRIDGE_OS
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Bridge driver Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp discovery hello interval' command in IOS XR?
### Response:
The 'mpls ldp discovery hello interval' command is used to configure the frequency at which LDP hello messages are sent. Hello messages are used to establish and maintain LDP sessions. A lower hello interval means faster detection of topology changes and quicker LDP convergence, but also results in more LDP traffic. The hello interval should be set to a lower value than the hello holdtime.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-6-FEATURE_ACTIVATED
### Response:
(Severity: 6), (Category: OS), (Description: A deactivated feature is activated.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-LOCAL_CORE_ISOLATION
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has detected isolation in the core and has attempted to failover.), (Recommended Action: Use the show <CmdBold>iccp group group-num<NoCmdBold> command to determine which core facing interface has triggered the isolation failure. Correct the failure for the given interface, this will clear the ICCP-SM core isolation failure. Reference the ICCP-SM section of the IOS XR documentation for more information on core isolation failures and related configuration commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_ASYNC_SEND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-3-SYSDB_GET_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The policy_repository process failed to retrieve an item from the system database.), (Recommended Action: The policy_repository process may function properly in the future but the operations associated with this configuration are likely in an inconsistent state. Consider restarting the process. If the message appears again, copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-UNKCMD
### Response:
(Severity: 4), (Category: MGBL), (Description: The first token in a command string was not a recognised MDACon command.), (Recommended Action: Check the list of available commands and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIA-3-PCI_DEV_ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCI Device is either a CARDBUS Bridge or PCI-PCMCIA Bridge. Here it cannot get PCI device information from PCI bus manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_EVENT_NOTIFY
### Response:
(Severity: 7), (Category: OS), (Description: Event conn notify failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-MD5_GET_PACKAGE_SIGNATURE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Failed to retrieve the package MD5 from the specified package's md5_manifest file, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFINDEX_PROVIDER-7-LTRACE_INIT_ERROR
### Response:
(Severity: 7), (Category: SNMP), (Description: An error occured while initializing LW tracing for ifindex provider library.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-GET_ENET_SERVER_COID_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Attempt to get the enet server coid has failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-EAOPT_SEND_NOKEY
### Response:
(Severity: 3), (Category: IP), (Description: There is no active send-key for the specified keychain and hence can't send data to the peer.), (Recommended Action: Check the keychain to see if it has any active keys. Sometimes, this error might come if there is no overlap between the send-keys. In that case, if keychain shows that there is an active key, then this error can be ignored. Else, change the configuration to have an active send-key.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: This is a generic error msg for memory allocation failure. The Process tried to allocate a memory and it wasn't succesful. Can happen when system is running low in memory), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show rsvp neighbor' command in IOS XR?
### Response:
The 'show rsvp neighbor' command is used to display information about RSVP neighbors. It shows the neighbor address, the interface to the neighbor, and the encapsulation used (RSVP or RSVP-TE). This command is useful for verifying the RSVP neighbor relationships.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-CHECK_RESPONSE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message indicates error code occured during nsg send.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-ASIC_ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The sfe-drvr process cannot initialize the infrastructure allow error capturing function for the PODs on the fabric card.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-2-XAUI_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: DMAC XAUI link went down and stayed down for an extended duration which would affect CE/Fabric connectivity of the RP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-EDM_UNREG
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to unregister EDM.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_EA-3-INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the IPSec SVI EA process on a particular node. The process will be restarted. Until the process starts successfully, any IPSec SVI interfaces located on that node will not come up. (If there is a standby node the interfaces should come up on the standby).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-BAGS_UNREG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to unregister a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSMGR_REG_REDST_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper registers with sysmgr for various taks. Sysmgr LR event registration failure. This will lead to unexpected behaviour from dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-2-ERR_SYSDB_REGS
### Response:
(Severity: 2), (Category: FABRIC), (Description: In Fabric Driver, unable to register notification of pod-err/suppress. It could be an Infra-sysdb issue OR fabric sysdb tuple name issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-BKR_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter driver detected a bkr module error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPP_LTH_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet length FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-6-ERR_3
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with three parameters.), (Recommended Action: '*SUPPORT')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-3-INST_NOT_FOUND
### Response:
(Severity: 3), (Category: L2), (Description: This error would indicate Sonet port/path/line/section instance not found at particular line of code with function as well. This should not happen in normal scenario. This message would print reason of failure as well.), (Recommended Action: This error indicates a problem in the code and cannot be easily recovered from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-3-EDM_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MFWD-HFR library encountered internal error during EDM oper/action setup), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHANCON-7-SVC_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: A service API debug is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-3-UNSUPPORTED_USB_DEVICE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Get and set card type for use in device handling. To discover node type and set up the USB device information for that node for supported USB device. If it unable to get the USB device information, then it displays the message as unsupported device information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-PKT_INT_ERR_AT_ILIF_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Packet Integrity Error at link nterface from NP/MUX on FIA), (Recommended Action: Verify correct link serdes error Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-3-UNKNOWN_IFSTATE
### Response:
(Severity: 3), (Category: L2), (Description: There is no action assigned to the if state change, and so nothing has been done when it was received.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WANPHY-3-FAST_TIMER
### Response:
(Severity: 3), (Category: L2), (Description: An API or a function call in wanphy_proc process failed. First %s - Type of Error Second %s - Reason), (Recommended Action: If the platform doesn't support wanphy fast polling, error can be ignored. However, below command must be run before applying any other configuration: - clear configuration inconsistency)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_PRM_STATS_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to initialize a statistic counter table.), (Recommended Action: Check the status of Metro Stats Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ADDRESS_ERROR
### Response:
(Severity: 3), (Category: IP), (Description: The telnetd server was passed a bad adress.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-PRESHARED_KEY_NOT_FOUND
### Response:
(Severity: 6), (Category: SECURITY), (Description: Failed to find preshared-key.), (Recommended Action: Configure a key to keyring attached to IKEv2 profile.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_LA_QOS-2-DEVICE_HANDLE_GET_FAILED
### Response:
(Severity: 2), (Category: QOS), (Description: Device handle is essential for many SDK APIs. Failed to get the device handle.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-INFO
### Response:
(Severity: 7), (Category: SYSDB), (Description: The server detected an error with one of its clients.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-SYSDB_DELETE_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The code failed to delete sysdb item while removing encapsulation config. This may be caused due to invalid arguments for which there is no current handling for the same, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-4-DSCP_EXTRACT
### Response:
(Severity: 4), (Category: IP), (Description: An error occurred whilst trying to extract dscp configured value. Client will use default dscp value instead.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: An error occured in the event loop. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-2-ACL_DWNL_FAIL
### Response:
(Severity: 2), (Category: L2), (Description: A resync with MA failed since ACL couldn't be downloaded.), (Recommended Action: No action is required. Process will be restarted in a few minutes. If not recovered, it's a fatal condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-RETIMER_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The device failed, most likely reason is firmware download failed), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP if the asic is continuously reset and recovery does not take place after device reset: 1. 'show processes sfe_driver location <loc>' 2. Collect all traces: 'show controller sfe trace all location <loc>' 3. dmesg and /var/log/messages from host and sysadmin VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOM_STATE_THROTTLE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_DIR-3-DIR_AGT_CAPI_SERVER_INIT_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: The ISSU Director's Agent module encountered an issue while attempting to set-up the ISSU Director-Agent CAPI service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-7-RELOAD_NOTIFICATION_TEST
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The node received a test reload notification just to check functionality. The notification is ignored and has no impact.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-3-INST_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Inconsistent file count between given and in the file list.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-EDM_SERVER
### Response:
(Severity: 3), (Category: IP), (Description: Error in the domain edm server setup. EDM is used for storing and retrieval of fast changing data. Due to this error, the show commands might get impacted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-6-IPACCESSLOGRP
### Response:
(Severity: 6), (Category: ACL), (Description: A packet matching the log criteria for the given access list was etected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-UNGRACEFUL_RESET
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The satellite has indicated that the last time it was reset, the reset was not triggered by a user operation from the host.), (Recommended Action: If the user knows why the satellite was last reset, then no action is required. If the user wants to understand more, then the reboot reasons on the satellite should be investigated; this can be done by either logging into the satellite, or by running 'show nv satellite diagnostics satellite <> collect reset-info'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-REG_ACCESS_FAIL_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Register access failure on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-ERR_UNKNOWN_EVENT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Unknown event type received while receiving mcd msg from fsdb during FDI init.), (Recommended Action: Check for error logs from fsdb and ingressq processes. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-6-DUMP_PATH
### Response:
(Severity: 6), (Category: MEDIA), (Description: Informational message indicating the nvram dump file path.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is BGP conditional route injection?
### Response:
BGP conditional route injection allows a route to be injected into BGP only when another route exists in the routing table. It is configured using the bgp inject-map command which specifies a route map. The route map matches on the injected route and specifies an exist clause to match the existence of another route.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_IO-7-INIT_FAILED
### Response:
(Severity: 7), (Category: IP), (Description: There was a software error during process startup.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-6-INFO_SHUTDOWN
### Response:
(Severity: 6), (Category: SECURITY), (Description: System shutdown.), (Recommended Action: 'NO ACTION')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR implement Layer 2 VPN services?
### Response:
Cisco IOS XR implements Layer 2 VPN services through technologies like Any Transport over MPLS (AToM) and Virtual Private LAN Service (VPLS), enabling point-to-point and multipoint services over MPLS.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOS_PORTT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_SIM-7-ERROR_RUN_BMON
### Response:
(Severity: 7), (Category: MEDIA), (Description: pthread_create() returns error), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-OVERTEMP_SHUTDOWN
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC FPGA is indicating that it has detected an overtemp condition that requires the HW to be powered-off to prevent damage from over heating. Under normal condition, the IOS environmental monitoring feature should have detected increased ambient temperature and powere-off the card before the CCC FPGA internal protection kick in. But if somehow the software has crashed or not in operational state, then we could see this CCC HW protection feature kick in.), (Recommended Action: Make sure that the system is operating under recommended ambient temperature range.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-PSN_WRAP
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq encountered a PCL Packet Sequence Wrap error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-CANNOT_GET_BLOB_SIZE_IN_STRUCT
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-6-DRIVER_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message gave a informative message. This is not a failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_3_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RGMGR-3-INIT
### Response:
(Severity: 3), (Category: INFRA), (Description: Initialization of RGMGR process failed to complete.), (Recommended Action: sysmgr will try to restart the RGMGR process. If it cannot be restarted it is a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-SYNC_REQUEST_TIMED_OUT
### Response:
(Severity: 7), (Category: OS), (Description: When the single writer mode is set, RDS library allowes to create a ticket. RDS library got a timed out when it requested for a ticket.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAN_SYNC_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 chan sync error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-EVENT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred in the main ospf_uv event loop.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is error message in PLATFORM FIB HAL which indicate error during buffer allocation and return the respective error code to the caller API), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show logging, show version, show platform, show install active, show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_EIO_TRAIN
### Response:
(Severity: 3), (Category: FABRIC), (Description: Repeated attempts to train the EIO links between the FIA and Ingressq/Fabric ASIC has failed. No further attempts to retrain the link will be made. This is indicative of a hardware failure on the serial link between the ASICs or an inter-process communication error between the driver processes.), (Recommended Action: Collect the required information indicated below. Also, run the field diags and the health check. If the health check or diags fail, then initiate the RMA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-OP_STATUS_NOT_FOUND_OR_INVALID
### Response:
(Severity: 2), (Category: INFRA), (Description: The file containing operation status could not be found, or contained inconsistent information. If an install operation was previously in progress, its status is now unknown. The user should check the state of the system and perform a system reboot to recover if required.), (Recommended Action: If an install operation was in progress, reboot the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install health-check command in IOS XR?
### Response:
The 'install health-check' command performs a set of system health checks before proceeding with an installation operation. It verifies that there is enough disk space, memory, and that the configuration is consistent across nodes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-7-NOT_CONFIGURED
### Response:
(Severity: 7), (Category: INFRA), (Description: ZTP is not configured to run. ZTP will exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-WRONG_PLANE
### Response:
(Severity: 7), (Category: SYSDB), (Description: An application has tried to access a plane of SysDB data that does not exist on this node.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE_MAIN-3-TRACE_BUFF_INIT
### Response:
(Severity: 3), (Category: L3), (Description: 'Trace buffer initialization failed .' 'Tracing will not be functioning properly.' 'Process will proceed running.'), (Recommended Action: 'Process restart can solve this issue.' 'If proplem persists even after process restart,' 'please collect the error log with return value' 'and core dump of the process and contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-0-ASIC_FATAL_FAULT
### Response:
(Severity: 0), (Category: FABRIC), (Description: Fabric Interface Asic encountered an internal fatal fault. Card reload is the only way to recover from this error. The format string would display which of the internal fatal error resulted in this alarm.), (Recommended Action: The board would get reloaded. On reload of board, run following commands from RSP ksh to decode PCDS information - pcds_decode -c FIA <.pcds file> pcds_decode -c PFM_NODE <.pcds file>. If users has auto reset option disabled in admin config, then the board would not get reloaded on its own. At this stage collect the output of 'show asic-errors fia <inst> all location <loc>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8111-2-TRANSACTION_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIE transaction timeout), (Recommended Action: This error is a momentary error and software should be able to correct it. If this error persisted for a period of 60 seconds, please perform the following actions: 1. Please check for read/write access to the attached compact flash or eUSB device by creation a temporary file. 2. If the problem still exists, please reload the board using the following command: 'reload location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure load balancing for an L2VPN bridge domain?
### Response:
To configure load balancing for an L2VPN bridge domain, use the 'load-balance' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
load-balance flow
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HD-3-DEV_HARDDISK_RESTART
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hard disk restart is taking excess time.), (Recommended Action: Please attempt to restart the hd_drv process using command: 'process restart hd_drv'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_9_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-3-PROFILE_CREATE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The SLA Client Library received a profile that could not be created. This indicates that there was insufficient memory for creation of the profile and its associated data. Any operations configured to use this profile will not become active until the profile is successfully created.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. The Client Library will attempt to resync itself with the Profile Manager or an immmediate resync can be attempted by reconfiguring the profile.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_SDFEC_LOM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-PROTOCOL_INVALID_MSG_TYPE
### Response:
(Severity: 4), (Category: L2), (Description: The entire PDU was ignored due to an unexpected message type being received. This indicates that the last PDU sent by the peer device was not formatted correctly.), (Recommended Action: Check that E-LMI is configured on the peer device and that the link to the peer device is functionining correctly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-MUTEX_INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Mutex initialization failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-FAILED
### Response:
(Severity: 3), (Category: L2), (Description: - mmap failed for the following reasons * Invalid Virtual-Memory Allocations by jacket process causing SPA FAILURE * Not enough memory * The 'base_address' parameter passed to mmap is not correct - The spa might go to FAILED state on reload %s - mmap failed reason %d - maximum physical address space %x - base address), (Recommended Action: Restart the spa process, spa and LC to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_CERR_REG
### Response:
(Severity: 3), (Category: L2), (Description: BFD SSE was unable to register to component error message services. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective MSC reboot.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-EVT_BLOCK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to block event), (Recommended Action: Reboot the router either manually or via Command line. If that too fails call Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-INTERFACE_OPERATION_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to change interface state. The first argument is hex and shows the ifhandle.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Platform Manager encountered an internal software initialization error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. Memory allocation failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-2-OBJ_CREATE
### Response:
(Severity: 2), (Category: OS), (Description: Failed to internally create an object required to provide service.), (Recommended Action: Restart the rsi_agent process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-INVALID_64K_INPUT_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The 64k composite clock signal has been invalidated possibly due to loss-of-signal condition or AMI violations.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Ensure valid 64kHz + 8kHz Japanese timing signal(defined in G.703 Appendix II.1) is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An function has failed in Shelf Manager. The details are supplied in the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-MEDIA_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS failed to register for media callback with netio during initialization. As a result, CLNS will not be able to add its caps and wont receive or send packets. It's an internal error.), (Recommended Action: Please contact cisco-support with the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_REQUEST
### Response:
(Severity: 4), (Category: L2), (Description: An error has occured processing an incoming SSRP request for the client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider restarting the PPP MA process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_3_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power less than or equal to the low Tx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_16P_OC48-3-GET_NODEID_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLIM driver failed to obtain either its node ID or extract rack/slot/instance information (having obtained the node ID).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_CLIENT_EVM
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA-driver Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-3-DETECTED_RX_DROP_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The indicated rx pdma queue has a drop error occurred %d - device id %d - queue number %s - client name), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_PD-3-ACTION_UNSUPPORTED
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The configured actions for a class-map are not supported.), (Recommended Action: Modify the policy-map to a supported configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq Event Manager notify error), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the ingressq driver is up and running by executing the following command at the CLI of the active RP: 'show process ingressq location < >' If it is still non-operational, enable the following debugs of the ingressq driver process: error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events and restart the driver by executing the following command at the CLI of the active RP: 'process restart ingressq location < >' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SHMWIN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP local preference attribute?
### Response:
The local preference attribute is used to prefer certain paths external to an AS. A path with a higher local preference is preferred. It is the second criteria in the BGP best path selection after weight.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-DUP_RTRID_AREA
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPFv3 has received multiple router LSAs with our router ID.), (Recommended Action: OSPFv3 router ID must be unique. Change the router ID. Please also include the output of the additional following commands: - show ospfv3 database - show ospfv3 <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-6-CLOCK_CLASS_CHANGED
### Response:
(Severity: 6), (Category: L2), (Description: The clock class of the advertised clock has changed.), (Recommended Action: This message is for information only, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-CABLE_MONITOR_DISABLED
### Response:
(Severity: 3), (Category: MGBL), (Description: Failure in cable monitoring function. Since this functionality is not so important in console driver, any error in this thread will be reported through syslog and thread will retire. Errors are failure in malloc or pthread operation and if such basic functions fail, then it might mean system is in bad shape. So we're not sure restarting this process will recover the situation. To avoid worst case -lose console/aux accessibility-, this process will remain without cable disconnect function. Operator might want to restart this process if this functionality is required in which this router is physically located, such as datacenter or co-location house.), (Recommended Action: If you need cable monitor functionality, please restart the process to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_6_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-DB_INVALID_EPOCH
### Response:
(Severity: 3), (Category: L2), (Description: An internal inconsistency was identified while performing some operation on the database. The process will attempt to recover a consistent state, and should be able to continue operating. It is possible that some parts of the dataplane may become out of sync.), (Recommended Action: If additional problems are observed then restarting the process may help to restore the system to a consistent state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-RX_PKT_TLV_CHK_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: LDP received a message with a bad TLV from a peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the lsp-mtu command in IS-IS?
### Response:
The lsp-mtu command is used to configure the maximum transmission unit (MTU) size of IS-IS LSPs. By default, the LSP MTU size is 1492 bytes. If any link in the area has a reduced MTU size, the LSP MTU should be lowered on all routers in the area to prevent LSP fragmentation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_MFWD_FRETTA-5-ERR_SYSDB_INIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The MFWD-FRETTA library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLCTRLR-4-LOOPSTATUS
### Response:
(Severity: 4), (Category: L2), (Description: A configurable controller loopback status.), (Recommended Action: No action reqiured. Msg displays loop status)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-MEMBER_ENCAP_REMOVE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to remove encaps.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-EVENT_HANDLER
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemon was unable register an event handling for processing received messages, and therefore failed to initialize. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-6-PROCESS_NAME
### Response:
(Severity: 6), (Category: ROUTING), (Description: The name chosen for the OSPF process matches an ospf show or clear command, or a command abbreviation. This can cause ambiguities with subsequent show or clear commands for this process.), (Recommended Action: Choose a different name for the OSPF process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-7-GEN_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: PCIE debug information), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-BRM_BARRIER_SYNCED_UP
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message indicates that system barriers synced on this node. This message is expected during normal operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-3-CHAIN_BUILDER_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The software forwarding support for IEEE802.1Q VLANs was unable to set up an interface. Software forwarding VLAN functionality on the affected node may be impaired.), (Recommended Action: It may help to restart the VLAN EA process on the affected node, with <CmdBold>process restart vlan_ea location [location]<noCmdBold>. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-6-START
### Response:
(Severity: 6), (Category: PLATFORM), (Description: It indicates that a FPD image upgrade or downgrade has started. The current image version and the upgraded image version are displayed.), (Recommended Action: This is just information to the user. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_6_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-INTERNAL
### Response:
(Severity: 3), (Category: OS), (Description: The server has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-ATTR_INIT_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: An error occurred during initialization of sysDB pthread attribute.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOL_DEME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-ERR_CTRACE_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: SFE driver failed to initialize ctrace buffers. However, the driver will function as normal. With no traces available for debugging.), (Recommended Action: The driver will restart and try to recover. Make sure the driver restarts and recovers. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-NO_INPUTBUF
### Response:
(Severity: 6), (Category: ROUTING), (Description: This system failed to allocate an input buffer because there was insufficient memory to do so.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-EVENT_CONN_EVM_HANDLER_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: During initialization, IS-IS failed to register for input or output notifications for the specified service. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-UNLINK_NVLOG
### Response:
(Severity: 4), (Category: OS), (Description: Check specified log for important information), (Recommended Action: Delete the NV_LOG file manually after copying it out of the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable MPLS LDP on an interface?
### Response:
To enable MPLS LDP on an interface, use the 'mpls ldp' interface configuration command. RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-if)#mpls ldp
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_GET_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while getting/allocating FGID. This can occur due to - Invalid Entry handle - failed to get pre-allocated managed FGID pool), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: BPE Event Manager event block error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-6-STATE_CHANGE
### Response:
(Severity: 6), (Category: OS), (Description: Service state changes. They are not necessarily critical errors but need investigation by DE), (Recommended Action: Collect system logs. Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-SUPP_SUCCESS
### Response:
(Severity: 5), (Category: L2), (Description: Authentication was successful.), (Recommended Action: No action required (normal operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-BMA_OUT_OF_SEQUENCE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT received an out of sequence BMA buffer request response), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESSION_MON-4-CERR_CODE
### Response:
(Severity: 4), (Category: SNMP), (Description: iedgemon encountered error and cerr code is returned), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-GO_STANDBY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Node role state regressed from active state to standby state. This is not currently supported by RIB.), (Recommended Action: If the node's role change from active to standby was not deliberate, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONAUX-3-CONSOLE_BLOCK_REG_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ConAux Identity module has been unable to register the console block.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR5
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-4-PKT_ALLOC_FAIL
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: A packet client was unable to allocate the required number of packets for transmission because no more packets are available. This may be a transient issue, if the system is under unusually heavy load, or if the situation persists it may indicate a packet client problem.), (Recommended Action: Attempt to reduce load on the system before trying the requested action again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_13_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-6-MASTERKEY_UPDATE
### Response:
(Severity: 6), (Category: SECURITY), (Description: it show the progress of Masterkey update on system. State of masterkey set to started when update of masterkey done by admin. State of masterkey set to completed when all application complete the encryption of existing type6 data with new masterkey.), (Recommended Action: check the status of all type6 application with 'show type6 clients'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you activate a software package in Cisco IOS XR?
### Response:
A software package is activated in Cisco IOS XR using the 'install activate' command, which enables the package's features on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-SYSDB_BIND_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error while trying to bind to sysdb.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-5-MAX_GROUP_LIMIT_REACHED
### Response:
(Severity: 5), (Category: L2), (Description: The maximum number of allowed group on the bridge-domain interface has been reached. Need to reconfigure the maximun number of groups allowed or take steps to reduce groups.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-THREAD_POOL_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Thread pool error.This will restart dumper. After restart, dumper will recover.), (Recommended Action: Please restart the process dumper. If the issue is seen even after process restart then Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-FILE_SIZE
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to add command defined under the file), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the interface preconfiguration feature in IOS XR?
### Response:
The interface preconfiguration feature in IOS XR allows the configuration of an interface before the interface module or line card is inserted into the router. When the module is inserted, the pre-configured settings are automatically applied.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-PCIE_TX_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: CIB PCIe Tx FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RIB_RETRY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some routes were not successfully installed in the RIB. Consequently, an attempt was made to save these routes to retry later. However, an error was encountered during the save attempt.), (Recommended Action: Issue a 'clear route <address family> <sub-address family>' to cause BGP routes to be reinstalled in the RIB. If this does not work, issue a soft or hard reset to all peers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-STATS_INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is typically an internal error in the software. The software failed to initialize statistics infrastructure on the card where the error is seen.), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea. If the problem persists, copy the error message as it appears on the console and any noticeable side effects. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-7-DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when cleaning up debug. This is not a critical error, and the process can continue functioning noramlly despite this failure. Particular undebug will not be effective though.), (Recommended Action: Provide the following log: Collect Console logs and output of -show logging process pifibm_server_rp loc <active RP>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-TELEMETRY
### Response:
(Severity: 4), (Category: ROUTING), (Description: Report non-successfull telemetry calls), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-6-THREAD_MUTEX_FAILED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: NetIO was unable lock/unlock the packet mutex. This could lead to certain cases when the same packet is used), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-LWM_UNINITIALIZED
### Response:
(Severity: 3), (Category: L2), (Description: Host side LWM is not initialized since the spa debug structure is null which doesn't have any impact as this is an informational message to the user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-3-WRITE_OWNERSHIP_FAIL
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The replicator has repeatedly failed to acquire ownership of a system data handle. The client process may need restarting.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_SOCKET_QUEUE_FULL
### Response:
(Severity: 4), (Category: L2), (Description: The queue for storing messages to write to the TCP socket is full for the specified SSRP group. This means messages will be dropped.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PPP MA process. *SUPPORT*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-2-STANDALONE_LEAD
### Response:
(Severity: 2), (Category: TOPOLOGY), (Description: System Admin Manager has declared self as a stand alone Lead.), (Recommended Action: No action is required. More nodes will add to the cluster when they come up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-2-ERR_SYSDB_BIND
### Response:
(Severity: 2), (Category: FABRIC), (Description: In Fabric Driver, unable to bind sysdb item. It could be an Infra-sysdb issue OR fabric sysdb tuple name issue.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-APPS_IMAGE_DOWNLOADING
### Response:
(Severity: 5), (Category: L2), (Description: Downloading SPA Application image as indicated in the message), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the properties exhibited by IOS XR software components?
### Response:
IOS XR software components exhibit the following properties: 1) Functionality that can be individually developed, released, and upgraded on running systems without affecting other software components. 2) Executable code for running a process or libraries that are shared between different processes. 3) Well-identified functionality, for example ipv4-bgp, ipv4-acl, ipv4-mrib represent some of the BGP, access list, and multicast functionalities.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-6-FILE_OPER
### Response:
(Severity: 6), (Category: MGBL), (Description: The TTY Server has encountered an error while opening FPD lock file. Devc-conaux has no issue to run, but FPD warning message will not be printed on AUX port during FPD upgrade.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_PW-4-ATOM_MERGE_ERR
### Response:
(Severity: 4), (Category: L2), (Description: The system is configured with multiple PWs with same pw-id and with neighbor addresses that are owned by the same LDP peer. This configuration is invalid and the invalid PWs will not be established.), (Recommended Action: Remove all the PWs pointing to same neighbor and with same pw-id and re-add the one that is correct.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD-4-WRONG_SSC
### Response:
(Severity: 4), (Category: SERVICES), (Description: A Service Controller process not currently registered is sending updates from a node. The Service Director will now attempt to recover from this by resynchronising with its clients.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-FPGA_PCI_PERSISTENT_FAIL
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA driver was unable to recover from the PCI link failure due to a PCI FATAL erorr. IOFPGA driver has to be restarted to recover. If 5 restarts of the driver cannot recover the card will reload. If card reload cannot fix the problem it is a HW fault where something went wrong with the PCI bridge), (Recommended Action: RMA)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN pseudowire class for encapsulation mpls?
### Response:
To configure an L2VPN pseudowire class for MPLS encapsulation, use the 'pseudowire-class' command followed by encapsulation settings. pseudowire-class myPseudowireClass
encapsulation mpls
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-THREAD_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: CGN_MA failed to create a thread. This thread plays an important role in sending message to CGN_EA. The process will restart under this scenario.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ADJNSF
### Response:
(Severity: 6), (Category: ROUTING), (Description: The adjacency on the INTERFACE-NAME and LEVEL with the system SYSTEM-ID STARTED responding or STOPPED responding during the NSF-restart of the SYSTEM-ID.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the BGP Distributed Speaker feature in IOS XR and what benefits does it provide?
### Response:
The BGP Distributed Speaker feature allows multiple BGP speaker processes to run on different nodes (RPs or LCs) in an IOS XR system. This provides improved scalability by allowing the BGP workload to be distributed across multiple nodes. It also provides improved resiliency because a failure of one BGP speaker process does not affect the others.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2TP-3-IPC_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An IPC transport software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-2-TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The thermal sensor trip point was crossed on DMAC.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-INCORRECT_PATH
### Response:
(Severity: 3), (Category: OS), (Description: OVA path invalid), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-NETWORK_TYPE_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPF has received a hello packet with non-zero Designated Router field on an interface that is not a multiaccess interface. Indicates a misconfiguration of network type among the OSPF routers in the given subnet.), (Recommended Action: Check the network type on all OSPF routers in the given subnet.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_1_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_ALARM-3-MAX_BRGMEM_ENTRY_PER_NP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Exceeded maximum number of bridge ports allocated on a single NP), (Recommended Action: Reduce number of bridge ports per NP and retry)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_OVF_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered interlaken fifo overflow error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_MPLS_EA-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An initialization error has occured for MPLS Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-3-OIM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A fatal error occurred in 10GE PLIM driver OIM rule validation.), (Recommended Action: 1. Remove the Xenpak and check if it is Cisco qualified Xenpak. 2. If it is Cisco qualified Xenpak, check DWDM Xenpak placement rule.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_M_FREE_EMPTY_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast free pages empty on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB EA, error), (Recommended Action: Please collect the console log and CLI history (show cli history detail loc <>). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-2-LTRACE_DECODE_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: During ltrace decode, the decode function retrieves file names, which must be placed into a dynamically allocated array. If the allocation calls fail this warning is printed with the specific error from the system based on the return code of the allocation call.), (Recommended Action: The call only fails due to lack of memory. Wait for a short period of time (maybe a minute or two) to see if the system resource picture improves. If The problem persists, attempt to free up memory by killing unnecessary processes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN hub and spoke feature?
### Response:
The MPLS VPN hub and spoke feature allows a VPN to be configured in a hub-and-spoke topology, with the hub PE router importing and exporting routes to and from spoke VPN sites. It simplifies VPN connectivity and provides a way to share services from a central site. Hub and spoke VPNs are implemented using route target import/export between hub and spoke PE routers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SYSDB_MC_PERF_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering for sysdb_mc histogram stats failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-DEVICE_FORMAT_FAIL
### Response:
(Severity: 4), (Category: INSTALL), (Description: Selected device could not be formatted for one reason or another. Performing removal of packages and MBIs from the device to see if we can continue.), (Recommended Action: This error will be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-0-DAO_LINK_STATE_CHANGE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The internal link interface for the specified port is down.), (Recommended Action: The board would get reloaded. On reload of board, run following commands from RSP ksh to decode PCDS information - pcds_decode -c NIANTIC <.pcds file>. If users has auto reset option disabled in admin config, then the board would not get reloaded on its own. At this stage collect the output of (admin)'show tech-support control-ethernet location <nodeId> file outputFile')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-5-CLEAR_CORRUPT
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: Confirmation of the number of corrupt packets cleared when 'clear packet corrupt' was executed.), (Recommended Action: Check that the number of packets reclaimed is expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-7-ERROR_REG_PM
### Response:
(Severity: 7), (Category: MEDIA), (Description: PM_FAULT_REGISTER_DEVICE registers a device instance with the fault report API. This step must be done before the device driver may report faults. It should be done at the init phase rather than when an error occurs. When registration of device instance failed, fault reports are not logged.), (Recommended Action: Debug message only, no action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_LIB_PD-6-BMT_MEMORY_RELEASE
### Response:
(Severity: 6), (Category: L2), (Description: A failure occurred during the freeing up of the BMT. This resulted in building up of shared Memory. This will not have functional impact immediately unless Shared Memory is deprived.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-3-SESSION_LIMIT_REACHED
### Response:
(Severity: 3), (Category: L2), (Description: Dot1x resource limit reached, dropping new clients.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-SATELLITE_IDENTIFIER_CHANGE
### Response:
(Severity: 3), (Category: L2), (Description: A Satellite Info change notification was received for a parent interface which still had child interfaces registered.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the Satellite Info. To do this issue 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-SYSDB_NS_NODE_TO_STR_FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_CLEAR_LED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An I2C failure occurred while trying to clear one or more of the alarm card LEDs.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_SYSDB_DATALIST_CREATE
### Response:
(Severity: 7), (Category: OS), (Description: An internal sysdb function failed.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-C_SHIM_QUERY_INTERNAL_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while fetching Shim information due to one of the following reasons: 1. Invalid arguments passed to function 2. Shared memory not yet initialized 3. Information pertaining to requested handle not found), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-6-COID_DISCONNECT
### Response:
(Severity: 6), (Category: OS), (Description: Got a DISCONNECT PULSE. Information Message only. %d- coid %d- server coid), (Recommended Action: Informational Message only)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-6-UPDN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link to the RSP control plane switch has change state.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers ce-switch link detail location <loc in msg><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers ce-switch link detail location <loc in msg><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-STARTUP_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: TACACS+ process failed to startup properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-DISCONNECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during an attempt to tear down the RIB Event connnection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-STUB_ASBR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Router is configured as an ASBR but is only connected to a single stub area. This can waste resources since the router has nowhere to send the external LSAs that it is generating.), (Recommended Action: Check configuration and disable redistribution of routes into OSPFv3 if appropriate.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-IFMGR
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified interface manager request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-XFP_LINE_RATE_UNSUPPORTED
### Response:
(Severity: 3), (Category: L2), (Description: XFP unable to support configured line-rate; replace XFP OR change configuration.), (Recommended Action: Replace XFP OR change configuration)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-ROLLBACK_FILE_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: There was an error when trying to create the loadpath file for this rollback point. The operation will continue successfully (given no other errors), but this point cannot be used as a rollback point.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_BRIDGE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver could not create Bridge instance.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_WRITE_CMOS
### Response:
(Severity: 7), (Category: MGBL), (Description: Writing value of NMI enabled flag to CMOS.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TGN-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The pagent process exited due to the reason mentioned in the message.), (Recommended Action: To bring up the process , reload the LC or reinstall the pagent pie.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-3-SHM_SEGMENTS
### Response:
(Severity: 3), (Category: HA), (Description: Unlink of shared memory segments failed. While initializing checkpoint.), (Recommended Action: The process shared segments are not unlinked. Process will take care of unlinking in other possible way. If the error is reported 2-3 times more . Collect system log and show tech-support and Contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GSP_EM-5-DEBUG_INIT_FAIL
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Debug initialization failed within EM. Debugs may not be printed), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Encounter problem during process initialization. '%s' contains the explanation of the problem. %s - error description %d - error code %s - error code description), (Recommended Action: Restart the fabio_svr process. Contact TAC if problem still exist)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-REMOVE_LOWMEM
### Response:
(Severity: 7), (Category: OS), (Description: Memory running low), (Recommended Action: Reboot the router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-CPI_PEER_FAIL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Driver returned inconsistent standby RSP card presence data. This error might be observed due to a slow removal of the active RSP.), (Recommended Action: No action is required. The message is logged for informational use.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_UIDB-7-ERR_INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of uidb_svr process has failed due to one of the following reasons: 1) Failed to create server context. 2) Failed to get schedular parameters. 3) Failed to initialize event manager. This would prevent process from receiving events. 4) Failed to register with debug. This would prevent process from logging debug messages. 5) Failed to bind UIDB server with MIPC server. This is needed to program features in hardware. 6) Failed to connect to PLIM asic processes. This is needed to program features in hardware. 7) Failed to initialize checkpoint. This is needed to checkpoint UIDB data to restore on process restart. 8) Failed to allocate, initialize and checkpoint shadow memory. This is needed to store and restore UIDB internal data. 9) Failed to get metro asic version. 10) Failed to attach event handlers needed to handle LWM messages. This is needed to enable/disable various features in hardware. 11) Various Sysdb or EDM failures 12) event_block failed. This indicates process has encountered unexpected error while waiting for events.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-IF_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SFP or XFP or CFP or QSFP entity is removed from the line card.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-INFO
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The eint encountered an error that would lead to degraded service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-INFO_HEAD2
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The header for resource depletion information that follows this message. It is of the format: PROGRAM_COUNTER COUNT), (Recommended Action: It is an informational message along with packet depletion log message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_MCAST-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM MCAST, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-3-PORT_CONTROL_ENABLE_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Failed to enable port-control on the interface.), (Recommended Action: Check the platform logs for the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-THREAD_NOT_EXIST
### Response:
(Severity: 3), (Category: MGBL), (Description: registry operation is failed because of corrupted data structure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-3-INVALID_BW_ENTRY
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS MA process encountered an invalid entry while receiving updates from ANCP or Ifmgr.), (Recommended Action: Contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-PACKET
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server has encountered an error using the Packet Library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_12_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVALID_PARSERFILE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Invalid parser file'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-PAK_NETIO_MUTEX_LOCK_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Failed to aquire mutual lock.), (Recommended Action: Restarting netio may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_CLI-7-INVALID_ARG
### Response:
(Severity: 7), (Category: HA), (Description: An argument was passed with an invalid value.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-AREANULL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all - show running-config router ospf - show config failed)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_9_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-0-ARBITRATION_LOCK_UNAVAILABLE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Failed to grab lock in DR mode as the lock is unavailable. Possible reason: Other RP booted up in Normal mode and permanantly grabbed the lock.), (Recommended Action: Make sure that if one RP is running as DR, the other RP is not booted up in Normal mode. Both RPs should be running either in Dual mode or in Normal mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_AAA_SESSION_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the AAA iEDGE service for the interface specified. The error message describes what operation has failed and why it failed. The most likely reason for this is that the AAA iEDGE server is unavailable. It may also be caused by low memory resource or a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_26
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-ERR_PM_INIT
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: System Admin Manager failed to connect to PM module.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-UNLINK_CORE_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Could not delete a file.This might impact dumper as the space will be consumed by core files which are not unlinked.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_TS_CORE_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-0 timestamp core error on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-DBGINIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unable to initialize a debugging flag), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Performance Monitoring (PM) feature in Cisco IOS XR?
### Response:
The Performance Monitoring (PM) feature in Cisco IOS XR allows collecting and analyzing performance statistics for various protocols and interfaces. It helps in identifying performance bottlenecks and optimizing network performance.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-NULL_PTR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An internal error has occurred in an application that has caused it to pass invalid data to the Package infrastructure. The current request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-PROFILE_NOT_SUPPORT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: There is some configuration on the line card that originated the warning message that is not supported by the active memory resource profiles. Consult the warning message for details.), (Recommended Action: Remove all unsupported configuration from the line card that originated the warning message. Consult the warning message for details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CONN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Connection to a shared database sotware component failed. This could be an intermittent issue. This can be ignored unless this message is seen frequently.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_MQ_FULL_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 1 MQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-IARM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
protect_debug-7-DUMP_HANDLE_FTR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-7-DBGSHUTDOWN
### Response:
(Severity: 7), (Category: ROUTING), (Description: The debug event shutdown failed. The ora docker will still run correctly, but debug commands may be unavailable.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IP_EA-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails due to failure during forwarding feature programming. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-SHOW_VER_INFO_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Publishing platform information to sysdb. If it fails to publish the information it displays this error.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_OPTICS_INT_PWR_SUPPLY_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-7-ASIC_ERROR_REPROG_RESOURCE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An ASIC error has occured and need to reprogram resource.), (Recommended Action: An error that causes reprogram resource has happened and been handled *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to perform a system upgrade in Cisco IOS XR?
### Response:
To perform a system upgrade by installing a base package, use the 'install' command in EXEC mode. RP/0/RSP0/CPU0:router#install add source tftp://server/path/to/image.iso activate
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-7-SVC_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: A service API debug is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-6-FABRIC_ISOLATE
### Response:
(Severity: 6), (Category: FABRIC), (Description: FIA driver received an isolate request.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-ASYNC_SOCKET_UNSUPPORTED_OPERATION
### Response:
(Severity: 3), (Category: IP), (Description: A Linux process has attempted to send a message or connect to an async XR socket. This operation is not supported. Only standard XR TCP/UDP sockets support communication with native Linux processes.), (Recommended Action: If the Linux process which triggered this event is known, it should be prevented from trying to communicate with this XR process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-TEST_SKIPPED_FROM_STANDBY
### Response:
(Severity: 6), (Category: DIAG), (Description: The specified test cannot be run from standby node.), (Recommended Action: Nothing. The test cannot be run but the system is working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-SHOW_ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Generic Show TAM Error message - (Error Message - Error Description).), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-FAIL_DEBUG_REG
### Response:
(Severity: 7), (Category: OS), (Description: Dumper registers with sysdb to keep various config related information.DUMPER debugging service register to sysdb failed.), (Recommended Action: Check the existence of the Sysdb service. The system is supposed to re-register if the Sysdb service is available. Collect the following data and contact support. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-REPARTITION_OF_EUSB_DONE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Some existing eUSB may have wrong FS or partitions. Check if need to reformat the eUSB. This message will get printed if repartitioning eUSB is done for the device.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_CONN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-7-INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: The Collector has detected an internal error. Reason of the error is in the message itself. Some of the errors are self recovering.), (Recommended Action: If you see any loss of functionality try restarting pm collector and pm server process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-MAC_LIMIT_AC_CLEAR
### Response:
(Severity: 6), (Category: L2), (Description: Number of MAC addresses in the attachment circuit has gone below the threshold of the configured maximum. If MAC learning or/and unicast flooding was disabled on the port due to MAC limit action, then it would get re-enabled automatically.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-REUSING_SHM
### Response:
(Severity: 7), (Category: HA), (Description: While initialising Checkpoint . Process is reusing shared memory segment because some unprocessed imdrs exist.), (Recommended Action: Debug message only. No action required. This message is to report state of process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVC_NOTIFY
### Response:
(Severity: 4), (Category: L2), (Description: During initialization, PPP MA failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth collect frequency feature?
### Response:
The MPLS TE auto-bandwidth collect frequency feature specifies how often auto-bandwidth measures the output rate of a tunnel before making a bandwidth adjustment. A higher frequency means auto-bandwidth reacts more quickly to traffic changes, while a lower frequency means bandwidth adjustments occur less often.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-BADTIMER
### Response:
(Severity: 3), (Category: ROUTING), (Description: A timer was found with an unrecognized type), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_MCAST_GTRIE-4-INIT_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Error while initializing Gtrie. Initialization will continue), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install commit command in IOS XR?
### Response:
The 'install commit' command makes the current active software packages persistent across reloads. Without this command, the router would revert to the previously committed software set after a reload.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XCVR-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message from the XCVR. Evaluate whether transceiver should be enabled or disabled. Unsupported transceivers are allowed as long as we have no other reason to disable them. Security has failed, the identification and compatibility information may be incorrect; ignore them.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-7-ERR_PCDS_SUPPORT
### Response:
(Severity: 7), (Category: FABRIC), (Description: PCDS support will not be available due to the specified reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-PEX_FATAL_ERR_BIT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a pex switch error), (Recommended Action: Please try to correct problem by reloading board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_THREAD_MUTEX_UNLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to unlock a mutex failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message provides information about the kind of events happening in the software at the location where the error is seen. This is not an error message. Typically, following events are logged in this message type. - End of successfull initialization of the software. - Start and end of a processing of new object that needs to programmed to the hardware. - Configuration is not applicable to the port.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-ENCAP_CHANGE
### Response:
(Severity: 4), (Category: L2), (Description: Set: CFM PDUs cannot be sent from the interface mentioned in the message, for one of the following reasons: - The interface has no encapsulation configured. - The interface has a complex encapsulation configured, which is not supported in conjunction with CFM. Complex encapsulations include: - Matching on source or destination MAC addresses - Matching on payload ethertype - Matching on VLAN tags using the 'any' keyword. In these cases, it cannot be determined how to format the Ethernet header for sending CFM PDUs, and hence CFM is not supported in these scenarios. - The interface encapsulation is such that more than 2 VLAN tags are needed. Clear: the error condition no longer holds; either a supported encapsulation has been configured and CFM PDUs can be sent, or all CFM Maintenance Points have been removed and CFM PDUs no longer need to be sent.), (Recommended Action: Either configure a supported encapsulation on the interface, without using the above types of 'complex' matching criteria, or deconfigure any CFM MPs on the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_PKT_F3_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 3 multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-INTERFACE_MANAGER_CONNECT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error. Frequency synchronization on this line card is disabled.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-NETWORK_TYPE_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPFv3 has received a hello packet with non-zero Designated Router field on an interface that is not a multiaccess interface. Indicates a misconfiguration of network type among the OSPFv3 routers in the given subnet.), (Recommended Action: Check the network type on all OSPFv3 routers in the given subnet.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-RELOAD_DENIED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that requested node cannot be reloaded because its in UNPOWERED (admin-config power-disabled) state or not ready for reload operation.), (Recommended Action: Remove node's power-disable config via CLI and then try again: (admin-config)#no hw-module power disable loc <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-2-NSR_TRIGGER_FO
### Response:
(Severity: 2), (Category: ROUTING), (Description: If nsr switch-over knob is on, active bgp will trigger the switch over in case of tcp failure or bgp failure if nsr is ready and install is not in process.), (Recommended Action: This msg is info only. Analysis should be done if switch-over is not expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-5-SECURITY_MAC_SECURE_VIOLATION_AC
### Response:
(Severity: 5), (Category: L2), (Description: The MAC secure in attachment circuit has detected violated packet. This might be a security attack. A relearn attempt had been made on the attachment circuit for a MAC address which had been already learned by another secure port. One of following action might be configured and will be taken on this attachment circuit: - Restrict: drop the packet and disable the learn attempt - None: forward the packet and allow the MAC to be relearned - Shutdown: shutdown the port on which the learn attempt was made If no action has been configured, the restrict action will be taken by default and packet has been dropped.), (Recommended Action: Fix the root cause of the mac security action and use l2vpn clear command to bring back this port; (<CmdBold> clear l2vpn bridge-domain <NoCmdBold>).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PFI-3-NODEID_CREATE_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to create node id instance. The returned error code should indicate the reason for the failure of the api. This is a transient error in the system likely due to some config events. The client logging this error should retry the api and/or handle this error accordingly. If this error is seen persistently, Initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IOS XRv reddrv error message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-6-UP_REV
### Response:
(Severity: 6), (Category: PLATFORM), (Description: For displaying severely up-rev notification.), (Recommended Action: tech support should be contacted for downgrade instructions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVC_CLOSE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA failed to close a connection to an essential service. This is an internal error and it requires a restart of the process for recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_PDU_FORMAT
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has received a PDU containing a format error. This indicates that the system which built the PDU is not conforming to the protocol specification. In most cases this is the neighbor, but in the case of LSPs it is the system which generated the LSP. The message contains the type of the PDU, the interface it was received over (and, in the case of a LAN interface, the SNPA), and a description of the format error. IS-IS will not use any of the information contained in this PDU. In the case of an LSP, IS-IS will not flood the LSP to neighbors.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_THREAD_MUTEX_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while creating a mutex for use by a client with the specified ID. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-2-TPM_DB_CORRUPT
### Response:
(Severity: 2), (Category: SECURITY), (Description: TAM detected a change in master key or corruption of TAM database/master-file. Cleaning up to restore TAM functionality.), (Recommended Action: Master key used to decrypt secure storage on this card has changed or is corrupt. Hence secure objects cannot be retrieved or stored. As a mitigation, secure object datatbase is deleted and recreated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-IPV6_LAS
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while IS-IS was using the IPv6 Local Address Consumer Service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rewrite-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: Rewrite Helper failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPC_I2C-7-BUS_UNHANG_SUCCESS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The I2C bus hang has been cleared successfully. I2C communication is restored on the bus.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_L2FIB-2-ELAN_MACEXTTABLE_CLEAR_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Failed to clear the elan mac collision table in L2FIB PD component.), (Recommended Action: Please unconfigure and reconfigure L2VPN to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-SUDI_AUTH_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SUDI authentication failed for indicated card/chassis during init.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-INIT_ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: This is a debug message in the NPU Driver to indicate an operation or condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-PORT_ERR
### Response:
(Severity: 3), (Category: IP), (Description: A port up/down message was received but the operation failed.), (Recommended Action: If the error was the result of a get operation for a port down event, perhaps a port up was never received or a clear operation was performed on an unconfigured ANCP port circuit. If the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation, look to see if there are other system messages which can provide more clues to the problem. If there are no other messages, please take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_STAT_VEC_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 state error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV4_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-ATTRKEY_INCONSISTENT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The attribute key generation routine has gone beyond the checkpointed value. This is a rare condition to occur as the key generation algorithm is very simple.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB_API-3-GENINITFAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred at client initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_DROP
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-6-CHAN_CONNECT
### Response:
(Severity: 6), (Category: L2), (Description: The channel connection for sending messages and pulses is failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOPAZ_PFI-3-SET_GLOBALS_FTRUNCATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to truncate the file. The returned err code should indicate the reason for the failure of the api. This is likely due to a transient condition on the system. The client calling this api could retry it or handle it accordingly. If the issue is seen persistently, initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-7-IMAGE_VALIDATED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A message to indicate which MBI was validated for which location.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-INVALID_TTY
### Response:
(Severity: 6), (Category: MGMT), (Description: This comes when trying to run console program on non-console/non-aux), (Recommended Action: 'Debug message only. No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of OSPF authentication and how is it configured?
### Response:
OSPF authentication is used to ensure that OSPF packets received are from trusted sources. It prevents unauthorized or malicious routers from injecting false routing information into the network. OSPF supports plain text and MD5 authentication. Authentication is configured per area or per interface using the 'authentication' and 'authentication-key' commands under the OSPF process or interface configuration mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_8_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-BRINGDOWN_REQUEST_RCVD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This msg means that shelfmgr is shutting down a node because a process specifically requested it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-BADCLASS
### Response:
(Severity: 7), (Category: MGBL), (Description: An invalid class name was entered either by itself or as part of a hierarchy string.), (Recommended Action: Use the classinfo command to get more information about available class names. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_SYSDB_DATALIST_NEXT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The sysdb operation failed. Error text is displayed in the message'), (Recommended Action: Unexpected failure happened while reading data from sysdb datastore. This could affect parser from parsing some commands. Please collect the console log, show logging output, any other messages related to system database, and unexpected syntax error failure in some commands if any noticed. And call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_IPSEC_TO_NBR_REMOVED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic Network Control plane - IPSEC tunnel ' 'to neighbor is removed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FC-6-FWFILE_INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: Information about the firmware file that is impacted by the install), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDIO-7-OPERATION_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-CRS_X_MSC_POWERUP_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MSC-400G board power up failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show mpls ldp bindings' command in IOS XR?
### Response:
The 'show mpls ldp bindings' command is used to display the LDP label bindings. It shows the prefix, the local label assigned by the router, the remote label learned from the LDP peer, and the peer ID. This command is useful for verifying that labels are correctly assigned and exchanged between LDP peers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-SET_VTX_ROMVAR_STRING
### Response:
(Severity: 3), (Category: OS), (Description: Failed to set ENABLE_VTX rom monitor variable due to invalid string format.), (Recommended Action: Verify format of string from error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_TF_INTR_FIFO_1HI_EXT_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_TF_INTR_FIFO_1HI_EXT_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_GSP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID-DB server encountered the annunciated GSP error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE flooding threshold up/down feature?
### Response:
The MPLS TE flooding threshold up/down feature allows the control of when link bandwidth changes are flooded as a result of bandwidth increases or decreases. Flooding can be triggered when the bandwidth crosses user-defined up or down thresholds specified as a percentage of the link capacity. This reduces the frequency of TE flooding due to bandwidth changes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XCVR-3-DEBUG_REGISTER_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message from the XCVR stating that registering with sysdb fails.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2TP-3-ERRMSG
### Response:
(Severity: 3), (Category: L2), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_3_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 3 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_PREEMPT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface, with specified LSP Id, has been preempted \ at specified IP Address or local node. The first %s refers to \ signalled tunnel name and the second %s refers to either \ the IP Address (of the remote node) or 'local node'.), (Recommended Action: None. This is a solicited message (by 'logging events preemption' \ configuration). User may verify reservable bandwidth on remote or \ local node as specified by the message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_ITEM_PEER_MISCONFIGURATION
### Response:
(Severity: 5), (Category: L2), (Description: If there is a misconfiguration for an item that may be resolved without user intervention, then the item and its children will be temporarily ignored. Once the misconfiguration is resolved, either by a resync of mLACP data or by the user, the item will no longer be ignored. Note that peer data which is rejected will be deleted from the local database so the information which caused the issue may not be visible in show commands.), (Recommended Action: Check <CmdBold>show mlacp<noCmdBold> after a short while to see if the problem has cleared and all expected items are present. If the problem does not clear, ensure that the configuration (on both local and peer device) is as expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-ERR_EVC_OPEN
### Response:
(Severity: 4), (Category: INFRA), (Description: CMPP failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CARD_POWER_OFF_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power off operation on the indicated card has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDAC_CTRL-4-MODE_CHANGE_REBOOT
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This indicates that the router has detected that it should operate in NV Satellite mode. This requires a reboot, which will happen automatically.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_LIB-3-L2FIB_API_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This error could have occurred due to specifying invalid object), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_MEM_SELFTEST_FAIL_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory self test failure on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. Please verify the bridge FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDS-3-PKG_MEM_CACHE
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred while the packages were being cached to memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-1-ALERT
### Response:
(Severity: 1), (Category: PKT_INFRA), (Description: An alert error has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_TPDV_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: In T1 mode TPDV alarm is raised when the transmit data stream does not meet ANSI T1.403 requirements for transmit pulse density.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-7-GENERIC_ERROR
### Response:
(Severity: 7), (Category: SECURITY), (Description: Error message for internal debugging purposes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power less than or equal to the low Tx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-0-SEM_UNCORR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered uncorrectable error. Reloading LC to recover), (Recommended Action: Ensure FPGA version is latest. Contact support if the error is persistent. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SYNC-3-SYSDB_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Could not bind to or register to sysdb), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAMSG-3-DEBUG_REGISTER_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: SPA related error msg which indicates registering with sysdb fails), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-NSR_UNRECOGNIZED_PATH_INFO
### Response:
(Severity: 4), (Category: ROUTING), (Description: A path with unrecognized flags has been synchronized to standby RP during NSR synchronization for a net. This may result in inconsistent state between active and standby BGP which may impact operation after RP switchover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-INVFREE
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE5_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE5_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-6-ACCTRC64B
### Response:
(Severity: 6), (Category: L2), (Description: A CPP access was traced), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB_API-4-PROC_EXIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-LICENSE_POOL_REMOVED
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license database contained a license pool definition for an SDR that does not exist. The licenses assigned to this pool were automatically moved back into the Owner pool.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WATCHDOG-3-UNEXPECTED_EXIT
### Response:
(Severity: 3), (Category: INFRA), (Description: Watchdog monitoring service exited unexpectedly. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-4-PCI_LATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Error was observed on the system PCI bus. Error description is provided.), (Recommended Action: Check if there are any asic errors or asic drivers restarts observed around this error. Check if process 'pci_bus_mgr' is up and runnning. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_EVM_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to set up event connection.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NPL_TIMEOUT
### Response:
(Severity: 3), (Category: ROUTING), (Description: A message is dropped in the NPL queue - this triggers NSR resynchronization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-5-SR_POLICY_BURST_INTERVAL_STRETCHING_INACTIVE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The condition triggering the SR_POLICY_BURST_INTERVAL_STRECTHING_ACTIVE syslog has been cleared. SR Policy delay measurement sessions now run using their configured burst interval.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_1_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 1 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECURE_VAULT-6-CORE_STOP
### Response:
(Severity: 6), (Category: SECURITY), (Description: The Secure Vault process has been disabled and the core elements have been stopped successfully.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_NEXTHOP_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to register a next-hop resolution event. Future state change events on the next-hop may cause further messages to be generated by the static process.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_CHAN_SYNC_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 chan sync error on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different ways to filter BGP routes on IOS?
### Response:
BGP routes can be filtered on IOS using\n- AS path access lists to filter based on AS path\n- Distribute lists to filter based on prefix\n- Prefix lists to filter based on prefix\n- Route maps to apply complex filtering logic\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you verify the installed packages after booting an IOS XR router with a .vm composite image?
### Response:
After booting an IOS XR router with a .vm composite image, you can verify the installed packages using the 'show install active summary' command in admin mode. This will display a summary of the active packages on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSA-6-LC_STATE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that Linecard is successfully up and operational data from device can be fetched), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET1_INTR_HDR_CSUM_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET1_INTR_HDR_CSUM_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DCL_LIB-4-UNEXPECTED
### Response:
(Severity: 4), (Category: HA), (Description: An unexpected condition was encountered. This is not necessarily an error, but information gathered here may help with debugging other problems elsewhere in the system.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-2-ASIC_ERROR_PON_RESET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An ASIC error has occured and power on reset is needed), (Recommended Action: An error has happen and PON reset has been performed to recover. Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TEMPERATURE_ALARM-3-DIE_OVERTEMP_YELLOW_MINOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hotspot temperature sensor is risen above or fallen below configured yellow threshold.), (Recommended Action: *SH_CMD show env*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-5-CORE_TRANSFER_STATUS
### Response:
(Severity: 5), (Category: OS), (Description: Dumper transfers core file to a persistant location(configured paths) after the core dump is successfull to /tmp/dumper. Status of the core dump transfer to persistent location.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE link-management timers feature?
### Response:
The MPLS TE link-management timers feature allows the configuration of timers to control the frequency of TE link state advertisements and processing. The periodic-flooding timer controls how often TE LSAs are flooded even without changes. The periodic-flooding threshold controls by how much bandwidth must change to trigger immediate flooding. The degraded-interval timer controls how often TE metrics are recalculated on degraded links.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_LOSS_OF_LOCK
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_MODIFY-3-FAILED
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS policy on the interface specified could not be modified successfully in response to an ANCP or interface speed change notification. This may happen because the QoS policy is now invalid with the new reference bandwidth.), (Recommended Action: Verify the bandwidth values. Remove the qos policy and reattach. Fix errors in the policy, if any.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EEM-7-ACTION_SYSLOG_LOG_DEBUG
### Response:
(Severity: 7), (Category: HA), (Description: The action_syslog call from tcl script.), (Recommended Action: Please verify command(s) mentioned in tcl script prior to error message are working fine (on router prompt). If issue is still seen then please provide command details which has resulted into this error condition to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-7-ERR_RECV_TE_MSG_VERSION
### Response:
(Severity: 7), (Category: ROUTING), (Description: The process has received a TE message with an incompatible version. As a result, the TE message is ignored and TE tunnel may not come up.), (Recommended Action: Collect output from 'show tech-support mpls traffic-eng'. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered in debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_EXMEM-3-EXTRL_MEM_MGR_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Exiting the process because of failure in CPP external memory manager.), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure exmem statistics location < >*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_PRINT_TIME_VAL
### Response:
(Severity: 7), (Category: MGBL), (Description: Printing value of time in sec:min:hour:day:month:year.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MGMT_UNEXPECTED
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Management Commands Process has encountered an unexpected error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-INSTALL_DEVICE_UNAVAILABLE
### Response:
(Severity: 3), (Category: INSTALL), (Description: Insthelper on non-dSC management nodes requires the same install device as instdir's install device on dSC. However, after waiting for some time, the required install device did not become ready. If it was a managed node, then its bootflash device is not available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSI_EA-3-TIMER_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an informational message in the CSI EA to indicate that an error was seen in timer operation), (Recommended Action: Please collect the trace,)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-EXIT_DRVR
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver process is exiting due to the mentioned error condition.), (Recommended Action: Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-4-CHKPT_CREATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MRIB encountered error while creating check point record along with key.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_OPTICS_PID_NOT_SUPPORTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PID not supported error was detected during optics initialization. A PID not support error is reported when either the PID can not be read or not supported on the platform. The optics is the pluggable optics on the line cards.Optics initialization may happen when linecard boots up, optics OIR and line card process restart. The optics will not be enabled if a PID not supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the optics with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB EA, error information), (Recommended Action: Please collect the console log and CLI history (show cli history detail loc <>). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHANCON-4-SVC_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: A service API warning is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INFRA_TEST-3-UNSOLICITED_1
### Response:
(Severity: 3), (Category: TEST), (Description: An unsolicited message with a string arg and an integer arg and an interface.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-BPARAMS_UPDATE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error in boot parameters reception occurred in Services PLIM. Cause of the error will be mentioned in the message displayed. This error blocks Application Launch on Services PLIM.), (Recommended Action: Do warm reload of Services PLIM MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-PEX_INT_VS0_BIT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a pex switch error), (Recommended Action: Please try to correct problem by reloading board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-EA_PLATFORM
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates a failure in platform programming.), (Recommended Action: An error may have occurred in the hardware or lower layer processes. Please collect the information specified in required_info section and contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-INTERFACE_QUERY_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: After an interface was learnt about by XLNCd, a netlink query was made to get the attributes for the interface. However, this failed, meaning any attribute information about that interface won't be sync'ed from linux to XR), (Recommended Action: If the problem persists, try a process restart, If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ED_SCH_INTR_UC_QTYPE_HANG_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ED_SCH_INTR_UC_QTYPE_HANG interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-MDIO_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MDIO read/write failure/success for the given port.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-7-GENERIC_ERROR
### Response:
(Severity: 7), (Category: SECURITY), (Description: Generic error message used for internal debugging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-INFO_LOG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-SHMEM_GIP_UNAVAILABLE
### Response:
(Severity: 3), (Category: L3), (Description: The IPv6 Neighbor Discovery (ND) spoofing process (ipv6nd_lite) has been asked to handle more global-scope IPv6 addresses than it is built to support. This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart. The error may result from a misconfiguration, or by being deployed in an environment with unexpectedly large numbers of neighbors.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_VERIFY_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp global-interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp global-interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-IF_CREATE
### Response:
(Severity: 3), (Category: FORWARDING), (Description: An error was encountered in creating the interface for the specified tunnel.), (Recommended Action: Remove and reconfigure the tunnel which is failed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_AAA_ATTR_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the AAA attribute service for the interface specified. The error message describes what operation has failed and why it failed. The most likely reason for this is low memory resource or a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_PM_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Satellite PM Failure (SAT_PM_FAIL) alarm is raised when there is a faulty power-supply assembly.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATMGCMGR-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMED_EI_EVENT
### Response:
(Severity: 7), (Category: HA), (Description: The event detector has failed to initialize the sigevent structure to be used by the Event Manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-MTD_FORMAT_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The host is reporting a failure while trying to format MTD device on the card. The MTD device is formatted once when it first boot IOS XR, but it can also get formmated trying to recover from failure to access the device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-3-SW_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An internal software error has occurred on the specified SPA.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_AIS_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected AIS defect for incoming signal. AIS is usually an unframed all-ones signal. For T1 mode AIS is declared when the BITS receiver detects four or fewer zeroes in a 3ms period. For E1 mode AIS is declared when the BITS receiver detects fewer than three zeroes in two E1 frames.), (Recommended Action: 1) Ensure framing format on port matches framing format on the line. 2) Trace and check the source of AIS signal. Possibly an incorrect internal configuration in the service provider equipment, or a failure in their upstream connections.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-DENY_IN_ACL_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Deny' action for an ACE is not supported and will be ignored. The behavior will be the same as with Permit action.), (Recommended Action: If the behavior is not acceptable, remove the Qos policy from the interface, otherwise no further action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_SCH_MEMP_ERR_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Scheduler Hang, Sram or egress mid-fifo parity error on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you enable BGP graceful restart in IOS XR?
### Response:
BGP graceful restart is enabled in IOS XR to maintain forwarding during BGP restarts and to signal this capability to peers. router bgp 65000
graceful-restart
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-MUTEX_TEST_LOCK
### Response:
(Severity: 7), (Category: MEDIA), (Description: A mutex which should have been locked was tested and found unlocked), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_DBG-3-ERR_DEBUG_LOG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error information during debug initialization in platform FIB), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-NULL_HANDLE_ALLOC
### Response:
(Severity: 3), (Category: IP), (Description: Handle allocated by port arbitrator is invalid. This might be because the system is low in memory.), (Recommended Action: Check if there are any possible memory leaks.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-BAG
### Response:
(Severity: 3), (Category: SNMP), (Description: A problem occurred while doing following operations from a bag. - Encoding information from bag - Decoding information from bag), (Recommended Action: Check for memory usage, this is a very corner case)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-GET_NODEID
### Response:
(Severity: 4), (Category: OS), (Description: A call to platform_get_my_nodeid faild.), (Recommended Action: Collect the system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-OVERTEMP_AMBIENT_INRESET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Do not insert A9K-NP300-LC on V1 Fantray system. Upgrade to V2 FT and then insert A9K-NP300-LC. For internal testing with ROMMON variable, it is allowed to boot-up. But in case of Inlet temp more than 35.0C, all A9K-NP300-LCs will be put in IN-RESET state. Software won't take any further action after this.), (Recommended Action: Upgrade to V2 Fantray immediately and do not power on A9K-NP300-LC again without upgrading Fan)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-SYSDB_CREATE_SET_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The code failed to create sysdb item while applying encapsulation config. This may be caused due to invalid arguments for which there is no current handling for the same, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-UNSUPP_TX_CH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects an unknown error on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption from received cells. There can also be a software bug such that the error is not handled), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_CHKPT_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver failed to initialize the checkpoint library. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-ENS_WRITE
### Response:
(Severity: 3), (Category: OS), (Description: ens_write call has failed. This call may be failed due to underneath transport issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Cpuctrl Event Manager event block error), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the 'show tech-support' command in troubleshooting Cisco IOS XR?
### Response:
The 'show tech-support' command in Cisco IOS XR generates a comprehensive report containing various system information, configuration details, and diagnostic data. This report can be used by Cisco technical support for troubleshooting complex issues and identifying potential problems.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_DPM-6-DISCOVERY_CHAIN_DOWN
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The Discovery protocol requires a connection to a satellite - either direct, or through a chain of satellites. If a link is identified to have gone down, then all satellites on the far side will be undiscovered.), (Recommended Action: If making transport layer changes or re-configuring the satellite, then this syslog is probably expected and purely informational, so no further action is required. If unexpected, then check the transport layer between the host and the satellite and ensure that the satellite is working as expected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-MSG_CHAN_DISCONN
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to disconnect a message channel.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-SRC_UPDATE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOPPER-3-SOFTWARE_PARAM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA process failed due to internal software error. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-3-CHKPT_XFORM_INVALID_DIR
### Response:
(Severity: 3), (Category: ROUTING), (Description: The RSVP checkpoint table translation library was invoked with an invalid translation direction.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-5-IN_COMPLIANCE
### Response:
(Severity: 5), (Category: LICENSE), (Description: All customer requested entitlements are authorized by Cisco licensing service.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-SEARCH_HDLS_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: nrs_search for the specified replica did not yield any data handles.), (Recommended Action: If this message is seen for a particular process on a particular node more than 5 times then contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
aaa_task-3-INVALID_AAA_TASK_DEBUG_FLAG
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_EEC1
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from EEC1.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_SYSDB_CONNECT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to connect with sysdb. Failed to connect to pfilter_ea_clr_edm_init()), (Recommended Action: A process will be initiated by the software. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-DSC_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The dsc process failed in initialization becasue of the error during initialization.The process will respawn itself.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-6-SYSDB_BLOCK_RECOVER_WAIT
### Response:
(Severity: 6), (Category: OS), (Description: SSM process is waiting for sysdb service(s) become available.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-PENDING_MSG
### Response:
(Severity: 7), (Category: OS), (Description: couldnt create pending msg for the incoming write/publish.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IPV4_REGISTRATION
### Response:
(Severity: 3), (Category: L2), (Description: CDP registration with the IP address library has failed. This means that IPv4 address information for interfaces local to this node will not be included in outgoing CDP packets. The neighboring devices will not see the IPv4 address information for this router's interfaces.), (Recommended Action: Restarting CDP as the address consumer, or the ipv4_ma as the address provider on this node may rectify the problem. proc restart cdp location <location of failure> or proc restart ipv4_ma location <location of failure>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-ACTION_BEGIN
### Response:
(Severity: 6), (Category: INFRA), (Description: A user requested install operation has begun.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-4-DOUBLE_CLOSE
### Response:
(Severity: 4), (Category: IP), (Description: The socket library expect close to be called only once by os.), (Recommended Action: When this message is seen, the information in required_info have to be collected and the engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRS Platform Manager encountered a error while update and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. If not please contact TAC with required information)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_CLIENT-4-EXIT_ON_ERR
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred in the NPU client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the NPU driver. The root cause may be located in either hardware or software.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-FANTRAY_COMM_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: System SW has lost communication with fan tray. Fan tray LED may not be consistent, (admin)# show env fan may no longer be consistent. Fans do continue to run, just no longer under system SW control.), (Recommended Action: Verify the failure, give CLI: (admin)# show env (admin)# show canb server-stats loc all every 5 minutes --> rxPkts and txPkts counters should be increasing If the failure does not alleviate after 30 minutes, give CLI: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-PARTNER_IS_DOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Sysldr has detected that a node is down and has informed reddrv.), (Recommended Action: There is no action required. The system should recover by undergoing a switchover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-CHKPT_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred when ANCP process tried to restore initialization data.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and if ANCP process is able to initialize and come up successfully after restart, then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_UNBIND_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering performance counter with stats infra failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-4-SVC_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: A service API warning is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSUB_EA-3-INIT
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An error occurred during the initialization of IPSUB EA process. The process will restart which should recover the situation.), (Recommended Action: System will retry to start the process. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-APP_ACTIVATE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: A user requested activate operation has errored and failed.), (Recommended Action: Inspect the error information and reactivate the application after addressing any issues. The error information can be displayed through the following command: <CmdBold>show appmgr application name <name> info detail<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-2-UNHANDLED_EVENT
### Response:
(Severity: 2), (Category: HA), (Description: This type of event is not handled.), (Recommended Action: Make sure that the event chosen is the right one.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVM_SEND
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA failed to send the specified message. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the affected PPP MA process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is route summarization in OSPF and why is it used?
### Response:
Route summarization is the consolidation of multiple routes into a single advertisement. This is done by advertising a contiguous address range that covers the individual networks. Route summarization reduces the size of the routing tables and link-state databases, which improves network scalability. In OSPF, route summarization is performed by Area Border Routers (ABRs) when they advertise routes from one area into another.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-PKGMGR_HISTORY_UNAVAILABLE
### Response:
(Severity: 4), (Category: INFRA), (Description: While preparing for an install packaging operation, the install infrastructure was unable to determine the historical set of package manager operations. This will have no impact on this packaging operation itself - however, any later attempt to abort the packaging operation may fail on this node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-ALARM_WARNING
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Autogenerated alarm), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_OPTICS_INT_PWR_SUPPLY_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_3_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKSTAT-3-NO_MEMORY
### Response:
(Severity: 3), (Category: SNMP), (Description: Data Collection or Transfer could not be successfully carried out because of lack of memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-KERN_OBFL_MSG2
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when an OBFL flash is not accessable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-QLIMIT_RANGE_MAX
### Response:
(Severity: 3), (Category: QOS), (Description: Configured queue-limit threshold exceeds the allowed maximum threshold), (Recommended Action: Please adjust the queue-limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-CLIENT_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A FIB client behaved erroneously or there was an unexpected state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-THREAD_LIMIT
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected error caused failure to increase the maximum limit of management connections to the device. This error would affect the user only if he tries to have the number of management connections above an approximate count of 25.), (Recommended Action: Restart parser_server process (process restart parser_server). If the message recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-INVALID_SID_TLV_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error occured while processing updates to RIB. The error is unexpected and fatal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVQ_ENQUEUE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is an unexpected error. The PPPoE MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_EDM-6-SYSDB_BAG_REG_FAIL
### Response:
(Severity: 6), (Category: ROUTING), (Description: The process failed while attempting to register its external data manager data blocks with SysDB.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-BADFUNCTIONS
### Response:
(Severity: 3), (Category: MEDIA), (Description: Some required functions have not been defined in DLL. Will exit), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-INCORRECT_LOADPATH
### Response:
(Severity: 4), (Category: INSTALL), (Description: Status information after two or more nodes were brought in parallel during the initial boot of the system.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-4-GBP_FULL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The switch encountered a memory full condition. Normally this error is not expected. As per the spec, this situation should fix itself. The ports will drop packets in ingress if the situation persists.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUF-4-MCAST_MSG
### Response:
(Severity: 4), (Category: OS), (Description: An incoming multicast message was received, supposedly containing data that should be persisted to non-volatile storage on the receiving location, but this persisting operation could not complete because of a problem.), (Recommended Action: This is unlikely to be immediately threatening to the router's health, but could cause misbehavior if the router is reloaded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR implement access control?
### Response:
Cisco IOS XR implements access control through the use of Access Control Lists (ACLs), allowing for the filtering of traffic based on IP addresses, protocols, and ports to enhance network security.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-6-INTF_SCALE_ERROR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The number of Source interfaces configured in the system are exceeding the MAX number supported by the Platform. Only the supported number of source interfaces would be programmed in the LC for mirroring.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Crossbar driver LWM reply error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_MEM_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an input memory error on link 2), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_0_NPU_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-0 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-3-MEM_ALERT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Memory issue found in RCMD process.), (Recommended Action: Report to Technical Support. This is an indication of a possible memory issue found in the RCMD server process. It is not service affecting and this message gets reported only when RCMD is being shut down. Please take technical support assistance to verify that RCMD process has been removed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_GET
### Response:
(Severity: 7), (Category: INSTALL), (Description: The Install infrastructure was unable to obtain some information which it requires to complete the current request or operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE7_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE7_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the placed process in IOS XR?
### Response:
The placed process is responsible for managing the process placement feature in IOS XR. It determines which processes should run on the RP and which ones should be offloaded to the DRP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-CONFIG_FALLOVER
### Response:
(Severity: 3), (Category: ROUTING), (Description: A speaker failed to process a configuration change for 'fast-external-fallover'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_ROUTES_THRESHOLD_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-FIT_POWER_ON_RESET
### Response:
(Severity: 6), (Category: FABRIC), (Description: This indicates that the FIT tool has forced/induced a power on reset.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-SERVICE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Service-Layer service initialization failed. This mostly would be a non-recoverable internal error that requires cisco support.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_EA-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured during the initialization of the process. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_1_SENDING_AIS
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in T1 and E1 modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-ROOT_USERDB_INIT_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Locald failed to create/remove the root user database on the disk0. This will affect authentication to ksh since it refers to this database.), (Recommended Action: As a workaround an admin could create this directory in disk0 himself. This should get around the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-6-EDM_DECODE_FAILED
### Response:
(Severity: 6), (Category: IP), (Description: IPV6 could not decode data supplied by the indicated external data manager.), (Recommended Action: Restart sysdb process and try the CLI again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-INTERNAL
### Response:
(Severity: 7), (Category: INSTALL), (Description: The Install infrastructure has encountered an unexpected state, and will not be able to continue operating successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls mtu' command in IOS XR?
### Response:
The 'mpls mtu' command is used to set the maximum transmission unit (MTU) for MPLS labeled packets on an interface. This is useful when the MPLS MTU needs to be different from the interface IP MTU, for example, when using MPLS over GRE or MPLS over Ethernet.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CREATE_SYMLINK
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A symlink file involved in the current request or operation could not be created. This may impact install infrastructure functioning.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-7-DEBUG
### Response:
(Severity: 7), (Category: MGMT), (Description: General debugging information for development and general diagnosis.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_CLI-7-BAD_BUFFER
### Response:
(Severity: 7), (Category: HA), (Description: A NULL pointer was encountered unexpectedly.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-INDUCED_ENS_NOTIF
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that shelfmgr was induced to send out an ens notification for the given node by the user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-4-INIT_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_CREATE_SGSERVER
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-FATAL_SWITCH_HARDWARE_INIT
### Response:
(Severity: 3), (Category: INFRA), (Description: Switch hardware initialization did not complete. Switch indicates it's non operational.), (Recommended Action: Verify that all firmware and fpga images on switch and board are up to date.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-GET_APINAME_REPORT
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not get a required API name information, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-WARNING_STR
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv4 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace [common|ipv4] all loc <slot number>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-PCI_RAM_CORRECTABLE_ERROR_OTHER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates a correctable single-bit error occurred on this internal SRAM. The error is corrected transparently. The location will be written automatically before being read again. %s - name of ram that sbe occurred %x - key of error node recorded %s - error data), (Recommended Action: Ignore this unless it comes with other error message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP weight attribute and what is its range?
### Response:
The weight attribute is Cisco proprietary and is local to the router. It has the highest preference in the BGP best path selection process. The range is 0-65535 and paths with a higher weight are preferred.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_17
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_LIB-7-ERR_GET_BOARD_TYPE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The platform library service call to find the hardware module type has failed. The calling application handles it appropriately.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_CREATE_EVENTMGR
### Response:
(Severity: 3), (Category: IP), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-CARD_PRESENCE_DRIVER_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The shelfmgr could not initialize its interface to the slot presence detection driver, due to the reason mentioned in the message. The shelfmgr will attempt to recover by restarting up to 5 times. If the issue persists, the RSP will be reset which will cause the standby RSP to take over as active.), (Recommended Action: None, since the system will perform recovery action automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-ERR_THREAD_COND_WAIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: FSDB encountered an error while attempting to wait conditionally on a thread. The operation related to the resource will be affected and the process will continue to run normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_MGR-4-RESTART
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: After a restart, the adjacency manager attempts to re-sync its state with AIB. A failure occurred during this process. This could result in adjacencies being erroneously deleted in AIB, and hence forwarding could be interrupted.), (Recommended Action: Wait five minutes, then restart the adjacency manager again by entering the command: 'process restart svii_adj_mgr location <node>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_MPLS_EA-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: AFEA MPLS-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-ENCAP_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: CFM was unable to process a change in interface encapsulation. As a result packets sent by CFM may be sent with the incorrect encapsulation. This indicates that either system resources are low, or that there is an internal problem with CFM.), (Recommended Action: Wait until any situation which is putting stress on system resources is resolved, and then try to delete and re-apply the encapsulation configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-3-UNNUM_CFLCT
### Response:
(Severity: 3), (Category: IP), (Description: The IP unnumbered specified in the message references another unnumbered interface. This is not consistent configuration.), (Recommended Action: Reconfigure one of the IP unnumbered interfaces so that the unnumbered interface does not reference another unnumbered interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-SERVER_DOWN
### Response:
(Severity: 6), (Category: SECURITY), (Description: TACACS+ server is unreachable or down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-VSP_UIDB_ALLOC_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: VSP Supported Scale exceeded.), (Recommended Action: Decrease VLAN ranges for VSP interfaces or delete some vsp interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_NEXTHOP
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to update RIB after a next-hop resolution event.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-MSG_SEND
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to send a message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-1-CORRUPT_MLIST
### Response:
(Severity: 1), (Category: OS), (Description: An Event Manager list of attached messages was found to be corrupt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. This is an internal error and should be reported to TAC. A memory dump should be taken (to assist TAC) and the application should be restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP_IPC-3-SEMFAIL
### Response:
(Severity: 3), (Category: SNMP), (Description: SNMP library incurred an internal software error. This error indicates sysnchronization lock crate failed), (Recommended Action: Restart process which causes failure senario. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-NOBUFFER
### Response:
(Severity: 3), (Category: ROUTING), (Description: EIGRP could not allocate a packet buffer to transmit a packet. This may or may not be transient. If the packet for which the buffer was not available is HELLO then the EIGRP adjacency may flap if this issue happens long enough for the peer to detect a hold time expiry. If the packet for which the buffer was not available is a non-HELLO then the EIGRP adjacency may flap if this issue is seen long enough to exhaust the maximum number of retransmissions.), (Recommended Action: The number of packet buffers available for transmitting EIGRP packets is low. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LMRIB_API-3-MISC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred in lmrib client lib. This could be a memory error, thread lock fail or a problem that the LMRIB client is unable to register with LMRIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-MIB_CHKPT_BATCH_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: CFM encountered an error while trying to maintain its checkpoint database. The checkpoint database is used to manage persistent MIB index values for accessing Domains and Services over SNMP. If an error was encountered then CFM has been unable to guarantee that MIB index values will be correctly maintained across process restarts, and existing database objects may have their MIB indices re-assigned.), (Recommended Action: CFM should continue to operate normally, except for possible re-ordering of MIB index values for any configured Domains and Services. CFM will have tried to correct any errors it encountered in the checkpoint database. If additional problems with CFM configuration are observed, then restarting the CFM Global Manager may help to resolve the problem. The CFM Global Manager can be restarted by issuing 'process restart cgm' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-1-FATAL_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an severe error message in the DPA module to indicate that an error was seen during init operation.), (Recommended Action: Please collect the console log, DPA traces (show dpa trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CT2_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver version is not compatible with the hardware version.), (Recommended Action: Upgrade the Port controller FPGA image using the FPD procedure followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-6-PATH_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message. No user action is required.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-LOST_EVENT
### Response:
(Severity: 4), (Category: MGBL), (Description: The CCV process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart ccv' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-MAXPFXEXCEED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Number of prefixes received from a neighbor for a given address family has exceeded the limit configured with the 'max-prefix' command.), (Recommended Action: Check the prefixes received from the neighbor and verify whether the limit should be increased, or the neighbor is sending more prefixes than expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_GET_NODE_STATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed on a call to system manager to get the node related state information. It's an internal software fatal error. IS-IS process will abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-NO_LOG_STORED
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install operation normally stores the result of the install operation for the 'show install log <install ID> detail' command to use. However, this was not possible for the reason given.), (Recommended Action: Use the syslogs for success/failure of the operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_UNSUPPORTED_PROTOCOL
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA received a packet with a protocol id, and was not recognised by the receiving control protocol. This error message indicates that a subsystem is incorrectly delivering packets to an inappropriate PPP control protocol, the packets are dropped.), (Recommended Action: In many cases, the message will indicate that an unsupported protocol is not being handled correctly and PPP is not protocol rejecting the given protocol. Generally this won't cause problems if the mishandled and dropped packet is for a protocol that isn't running anyway. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_CLEAR_PREFIX
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an error re-installing a route in the RIB after receiving a 'clear prefix' event.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-3-OWNERSHIP_PROCESS_FREE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The identified client attempted to access a freed packet.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-ATTR_ROMMON_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to initialize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-IPT_DEBUG
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an error has occurred during the initialization of the debug events for IP tunnel. Specific event type is included in the message. This error prevents IP Tunnel from printing debug messages if the corresponding debug flags are turned on.), (Recommended Action: This failure occurs during process initialization. Please try restarting the process that printing this message with the command <CmdBold>process restart <process name> location <node id><NoCmdBold> If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_PAK_LENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has received a packet which is larger than its internal buffers can handle. The packet has been ignored.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider reducing the relevant interface's MTU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_SOCK-4-ERR_PAKMAN_CORRUPTION
### Response:
(Severity: 4), (Category: L2), (Description: A packet manager corruption has been reported and the cHDLC Socket process has failed to cleanup to recover from the problem. The process will exit and be automatically restarted to recover from this situation.), (Recommended Action: It is expected that restarting the process will fix this problem. This is done automatically so no action should be required. If the problem recurs, then there is a problem in packet manager. A drastic solution would be to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-3-INITFAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The packet subsystem was not able to initialize properly. It will be restarted by sysmgr and should recover.), (Recommended Action: If packet manager is unable to start up after several restarts by sysmgr, please collect the 'sh log' output and contact your customer support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTH_SRV-6-INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: Auth Service general info message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_SSL-3-CERT_VERIFY_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSL Generic error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-BADREFCOUNT
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KENSHO_GL-6-PERFMON_STATUS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The user is attempting enable/disable the performance monitoring feature on Linecard. But the feature is already enabled/disabled on Linecard.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-MTD_MKVOL_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The host is reporting a failure while trying to create volume on the MTD device. The MTD device volume is created once when it first boot IOS XR, but it can also get re-created while trying to recover from failure to access the device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB_IFSPECIFIC_CLIENT-3-ERR_INV_MSG
### Response:
(Severity: 3), (Category: SNMP), (Description: The message received requesting an operation is malformed.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What does the term 'PIE' stand for in the context of IOS XR packages?
### Response:
PIE stands for 'Package Installation Envelope'. It refers to a modular combination of IOS XR software components that identifies a set of features a user wants to run on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-3-EVENT_CONN_OPEN_ALL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error was detected when trying to open all event connections attached to an Event Manager.), (Recommended Action: Restarting lpts_fm may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_EXCESS_DATA
### Response:
(Severity: 3), (Category: SECURITY), (Description: Received more bytes than required), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-4-CFG_RESTORE_SINGLE_INTF
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Configuration could not be restored on this interface after the interface was created.), (Recommended Action: Re-enter desired config manually. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-MIXEDMODE_UNSUPPORTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: MIXED MODE is not supported.), (Recommended Action: Mixed mode is not supported in this card, by default all the ports will be in same mode)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Service Platform Manager encountered an provisioning info.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_SSL-6-INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: SSL general info message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-CHKPT_PULSE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error in the Routine to pulse the Chkpt Thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMIAP-4-SYSMGR_FAILURE
### Response:
(Severity: 4), (Category: IP), (Description: SMIAP failed to signal sysmgr about its process state.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDPL_PD-4-MAX_EDPL_SESS_SUPPORTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-SPA_SERVER_MSG_HNDLR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process cctl_spa_server location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-3-EDM_REGISTER_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The FM process failed to initialize its edm manager.), (Recommended Action: Check if sysdb process is blocked using 'show processes blocked'. Restarting lpts_fm and sysdb may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-TOP_SHMEM_USER_WARNING
### Response:
(Severity: 4), (Category: HA), (Description: This process is one of the top sharedmemory users in the system. If the system reaches critical memory exhaustion, this process is subject to restart or termination. If the process is listed as 'Killed', then the system is in the process of recovering the resources used by the process.), (Recommended Action: Collect system log information. Contact technical support if the problem is not a misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-FAILED_TO_DISCONNECT_FROM_SDRNM
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to disconnect from SDR NM .), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX_FPD-3-VERSION_READ_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: PLX FPD version could not be read due to I2C errors. The output of 'show hw-module fpd' will show the affected FPD. This FPD will not be enabled to avoid potential upgrade and further issues.), (Recommended Action: In certain cases process restart of plx_fpd on affected or all locations will help to resolve the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CALVADOS_DUMPER-6-HOST_COPY_SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: Dumper has copied core file successfully), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-TX_CH_HI_BIAS_CURRENT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects a high bias current on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption in the downstream.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-HOST_FATAL_EVENT
### Response:
(Severity: 3), (Category: DRIVER), (Description: HOST has reported a fatal event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-DEPRECATED_PATH
### Response:
(Severity: 7), (Category: SYSDB), (Description: An operation has been attempted on a part of the SysDB namespace that should no longer be used.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-VERSION_NOTCURRENT
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: This satellite is running a software version which is compatible, but not current.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-3-UNEXPECTED
### Response:
(Severity: 3), (Category: OS), (Description: A function call returned an unexpected error. Possible resource shortage or coding error.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_TIMER_INIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Cannot create manageed timer), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-3-DENY_IN_ACL_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Deny' action for an ACE is not supported and will be ignored. The behavior will be the same as with Permit action.), (Recommended Action: If the behavior is not acceptable, remove the Qos policy from the interface, otherwise no further action is needed. 'no service-policy <policy-name> input|output')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SPI_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SPI Failure/Success while accessing device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-PAK_WRITE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error in constructing a packet to be transmitted by EIGRP. This may or may not be transient. If the packet which was not constructed is HELLO then the EIGRP adjacency may flap if this issue happens long enough for the peer to detect a hold time expiry. If the packet which was not constructed is a non-HELLO then the EIGRP adjacency may flap if this issue is seen long enough to exhaust the maximum number of retransmissions.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-MEM_CHUNK_ALLOC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error in allocating memory. This can occur due to (1) low available memory, (2) invalid arguments), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-VE_FAN_CTLR_SENSOR_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is for debug purpose.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an unexpected/invalid state while trying to process an event for a client request. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_QFPCPUCTRL-1-ERP_PAR_ERROR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: CPU controller FPGA detected a parity error on the SPAQFPBridgeCtrl1 ERP bus during data reception from SPAQFPBridgeCtrl1.), (Recommended Action: Reboot the board. If the problem persists, replace the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISAKMP-2-PARSE_MEMORY_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: No memory left to parse show output data), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5346_PLL_LOS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5346 PLL loss of Signal detected/cleared for RSP), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPT-3-FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CPT error message. %s- cpt message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR_SHARED-2-ERR_SHMEM_INIT
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fabric driver encountered the annunciated error during the shared memory initialization. The fabric driver cannot complete the initialization of the fabric ASICs.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-4-SERVER_ERR_CLINFO_HOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: IGP failed to save its client's message channel information. This could be a result of channel down or resource allocation failure.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-ETH_SERVER_OPEN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-BAD_NCTDELETE
### Response:
(Severity: 7), (Category: HA), (Description: Bad NCT record is being freed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-SIGNAL
### Response:
(Severity: 3), (Category: FABRIC), (Description: A signal was received when the driver is not yet ready. For SIGBUS card will reload. For others the signal will be raised to the OS), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_1_PKT_MAXLEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on FIA to NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_SPECIAL_HANDLE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and been handled.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-4-ERR_MPLSLM
### Response:
(Severity: 4), (Category: MGBL), (Description: IPSLA MPLS LSP Monitor module has failed to perform an operation.), (Recommended Action: See the message text for details of failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-DIMM_FAILED
### Response:
(Severity: 3), (Category: HA), (Description: Notification printed on detecting failed DIMM .), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Failed to allocate memory from Heap. This can happen during periods of intense memory resource usage or due to a memory leak - though these are extremely rare occurances. This message implies some message(s) between FSDB and SFE driver was not processed and so they might be out of sync.), (Recommended Action: Capture information as specified in the required_info section. Restart sfe_drvr to clear any out of sync issues.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_14_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_PAK_CLIENT_CONN
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS encountered an error while trying to set up a managed connection to the Packet Server. This is a serious error as IS-IS requires Packet I/O services to be able to form adjacencies, and the IS-IS process will shut itself down in response. This may be due to a low memory condition but is more likely to be a software programming error. The error string and error code provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_DLL_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq driver tried to register for a dll but it encountered an error. The driver might lose some of its functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2CCTRL-2-TRANSACTION_INTERRUPTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An SMBus Transaction Interrupted by Another Master), (Recommended Action: Please attempt to correct the error by reloading the card by issuing the command in admin mode -reload location <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_EGR_Q_ERR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-6-REMOTE_SESSION_STARTED
### Response:
(Severity: 6), (Category: L2), (Description: A remote latching loopback session has successfully started. This is for informational purposes only.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_EEPROM_INIT_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process timed out while waiting for the switch's EEPROM initialization to complete. In order to recover, ESD will reset the switch, then exit so that it can be restarted by the process manager and attempt to configure the switch again.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet', and 'show controllers switch trace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-7-NETIO_DEBUG_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An error was encountered when initializing debug.), (Recommended Action: Restarting netio may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-BIND
### Response:
(Severity: 7), (Category: MGBL), (Description: XML schema browser was unable to bind to MDA. It is possible that there is a problem with MDA or the Schema Server, or the communication infrastructure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-4-RIB_SEND
### Response:
(Severity: 4), (Category: IP), (Description: A route insertion/deletion request failure. Most likely due to resource issue (memory, CPU utilization, etc.)), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-APPLICATION_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Failed to execute some application functions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-NSR_SYNC_PEER_NO_SOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: Standby LDP received Init-Sync-Done notification from TCP but has no socket information from Active LDP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-FREE_BUFFER_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failure to free up the rx/tx buffer after recieving a packet. %d- Error code %s- Error Description), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_UIDB-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power less than or equal to the low Tx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FTPCLIENTMIB-3-NOTHREADCREATE
### Response:
(Severity: 3), (Category: SNMP), (Description: There are no resources available to create a FTP request processing thread), (Recommended Action: 'Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_SYSDB_REG_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to register for notification of changes on the displayed SysDB path.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-NON_LOCAL
### Response:
(Severity: 7), (Category: OS), (Description: A process on another node contacted the local QSM server. The local server refused the request.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_PTHREAD
### Response:
(Severity: 3), (Category: OS), (Description: The mutex lock/unlock failed), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-TSP_A_PKT_DECODE_DIS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSP decoder A disabled but packet received.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-INSTALL_OP_SYS_ERR_SPECIFIC_NODES_INCONSISTENT
### Response:
(Severity: 2), (Category: INSTALL), (Description: Further information supplied to be used in conjunction with the SYSTEM_ERROR_SPECIFIC_NODES_INCONSISTENT_HDR message. One of the nodes possibly now in an inconsistent state with itself and the rest of the system.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repair' if anomalies are found. If incorrect behavior is seen then restart processes impacted by the install on the inconsistent nodes (use 'show install log <install ID> detail' for a list of impacted processes).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_CLIENT_OVERWRITE
### Response:
(Severity: 4), (Category: IP), (Description: ARP has overwritten an interface entry with a client entry. This can sometimes indicate a conflict with the client configuration on the interface.), (Recommended Action: Ensure that the configuration is correct for the client in question. The client has configured the same IP address as one of the interface IP addresses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_VLAN_EA-3-VRRP_HSRP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Same VRRP and HSRP ID - not supported for the same interface at a time.), (Recommended Action: Please capture the complete error log. Please check the data sheet for the supported configuration. Please contact TAC for any support on this)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-DEBUGINIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Failed to initialize a debugging event for the reason listed in' ' the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISK_DRIVER-3-FAILED_TO_ALLOCATE_TIMER_LEAF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ATA device might report these errors when it unable to allocate event timer leaf.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-FLOWSPEC_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current flowspec profile and the newly configured flowspec profile. Needs attention with LC reload.), (Recommended Action: System LC is inconsistent. Need to reload the LC in order to activate the new flowspec profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISSU_LTRACE_INIT
### Response:
(Severity: 3), (Category: INSTALL), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: Tracing will not work properly. Process will proceed running. Can restart the process to overcome this issue. If error persists.Collect the error log with return value and core dump of the process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature less than or equal to the low temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug. This is not a critical error, and the process can continue functioning noramlly despite this failure. Particular debug will not be effective though.), (Recommended Action: Provide the following log: Collect Console logs and output of -show logging process pifibm_server_rp loc <active RP>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-STBY_STANDBY_READY
### Response:
(Severity: 6), (Category: HA), (Description: Redcon has determined that the standby card is ready to take over as active card if it needs to.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the module in the platform L2VPN component.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-TIMER_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error has occurred processing one or more timer events driving the MSTP engine. The process has restarted to correct this issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-VRF_RECONFIGURE_HOLD
### Response:
(Severity: 5), (Category: ROUTING), (Description: BGP is taking more than usual time to cleanup the VRF. This normally happens due to improper config or overflowing supported scale limitations. VRF reconfigure will not take effect until the cleanup is complete), (Recommended Action: This message is for information purpose only. Request to revisit config and scale)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR3_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-3 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SFRAR-3-SYSMGR
### Response:
(Severity: 3), (Category: L2), (Description: The call to inform the System Manager that SFRAR is running failed. The SysMg library API failed. This was attempted to setup message handler for message syncing.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP fault management?
### Response:
To configure RSVP fault management, use the 'rsvp fault-management' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp fault-management
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-CPU_IERR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has detected that the CPU complex in the indicated card is reporting an internal error condition that is fatal and it will be auto reset to recover from the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-5-BIOS_NOTICE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: BIOS running on the indicated card is sending a notice message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-2-ASIC_INIT_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar driver detected error during ASIC Initialization.), (Recommended Action: Please try reloading the card using command 'hw-module location <> reload' to recover. If the message occurs during every power cycle then please contact tech-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-6-REPOPULATE_SHADOW_SUCCESS
### Response:
(Severity: 6), (Category: MGBL), (Description: The shadow configuration namespace has been successfully re-synced with the actual configuration.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_ECM_CREATE
### Response:
(Severity: 3), (Category: L2), (Description: BFD Agent encountered an error while attempting to create an event connection manager for the specified path. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective MSC reboot.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-PTHREAD_CREATE_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-BAUD_RATE
### Response:
(Severity: 3), (Category: MGBL), (Description: The console baud rate is retrieved from the configurate register. Problems were encounted during this operation.), (Recommended Action: Check the default value that the system has resorted to and configure the terminal server to this speed. This will allow the console to be used to gain further diagnostics. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-OBJ_COUNT
### Response:
(Severity: 7), (Category: HA), (Description: A table's object count is not what it's supposed to be. This is an internal accounting error and does not cause any problems inside checkpointing, but it may cause applications which depend on this accounting info to mis-behave.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAIPC_NETIO-7-DEBUG_INIT_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: debug_register() failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure QoS for an L2VPN?
### Response:
To configure QoS for an L2VPN, use the 'policy-map' and 'service-policy' commands in global and interface configuration modes, respectively. policy-map POLICY-MAP-NAME
class CLASS-NAME
bandwidth percent 50
interface GigabitEthernet0/0/0
service-policy output POLICY-MAP-NAME
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-NO_FREE_SPACE_INFO
### Response:
(Severity: 7), (Category: OS), (Description: Please free some space.), (Recommended Action: Q Please free some space.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_3_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-7-LIST
### Response:
(Severity: 7), (Category: INSTALL), (Description: The Install infrastructure encountered an error when accessing a list of internal structures, and so the requested operation may not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-2-ERR_STR
### Response:
(Severity: 2), (Category: L2), (Description: Error in gatm operation. The error message denotes the gatm operation being unsuccessful with a particular return code string. This string has been used to signify the reason of the failed gatm operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-APPL_COND_RESYNC_MISMATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detected a db inconsistency when performing a resync with an application.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-USB_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The front panel usb port is disabled.), (Recommended Action: Remove USB device and execute clear_usb_oc in aux port to enable USB port. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error has been detected.), (Recommended Action: If the process restarts and this message is not repeating, no actions are needed. If this message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-PROTECTION_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Traffic protection impacts the filtering of traffic which would otherwise be destined for Linux applications. The configuration defines rules dictating which traffic is permitted or denied to reach Linux userspace. This message indicates that an error has occurred whilst applying the Traffic Protection configuration and so this filtering may not be working correctly.), (Recommended Action: If this is a transient issue then restarting xlncd will trigger it to retry applying nftables configuration. If this appears to be the result of particular traffic protection configuration, changing that configuration would trigger xlncd to attempt to program the new nftables configuration instead.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_LIB-3-MSG_SEND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and server. The MBI operation in progress will not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_RESTART
### Response:
(Severity: 3), (Category: OS), (Description: bcdl_agent process being restart to recover from an error state.), (Recommended Action: Collect showtech bcdl and contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-MAG_DELETED
### Response:
(Severity: 3), (Category: IP), (Description: --), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVM_ATTACH
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA failed to register a handler for the specified class of event. This is an initialization error and implies that PPP MA will not be able to operate correctly. The PPP MA process will abort and be restarted in an attempt to recover. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the PPP MA process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-INPUT_LENGTH
### Response:
(Severity: 6), (Category: MGMT), (Description: This message comes when user input length is exceeded), (Recommended Action: 'Debug message only. No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_AIB_FINT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMS-6-TELEMETRY_SUBSCRIBE
### Response:
(Severity: 6), (Category: MGBL), (Description: This message indicates the start or end of a dial-in or gNMI subscribe request from a client. For gNMI subscribe, this is only STREAM subscriptions. %s - This specifies the operation 'gRPC dial-in' or 'gNMI'. %s - This specifies the 'Start' or 'End'. %lu - This specifies the request ID. %s - This specifies the client network address of the form 'host:port' or '[host]:port'.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-6-STATE_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: For displaying state of the SIM Service Engine), (Recommended Action: No info needs to be collected. This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-EDM_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Initialization of the EDM server failed. It is not service impacting error but could impact MANS registers access via GASPP.), (Recommended Action: Restart the plim_services process (process restart plim_services location <>) If the issue persists, do a cold reboot Services PLIM MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TRM-3-MUTEX_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A process crashed holding hash bucket mutex. The mutex is revived but hash buckets may be in inconsistent state..), (Recommended Action: None. The initialization will be retried automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-SESSION_EXPIRY_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A loopback session could not be stopped after the expiry timer had fired. The loopback session is still running, and will attempt to be stopped every five seconds.), (Recommended Action: Either wait for the loopback session to stop as a result of the retries or attempt to stop it manually. If it doesn't stop, it may be rectified by restarting the edpl_ma process using the following command: - process restart edpl_ma)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT-7-BTREE_FIND
### Response:
(Severity: 7), (Category: OS), (Description: The internal message storage space optimizer failed to lookup the string being stored. This is not a critical, since the string will still be stored, however it does possibly indicate a lower level memory corruption or other problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T3E3-4-WARNING
### Response:
(Severity: 4), (Category: L2), (Description: A warning is generated while Updatng elapsed time from kernel clock. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of T3E3.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-THREAD_EXIT
### Response:
(Severity: 3), (Category: SYSDB), (Description: A thread of SysDB server or medusa process has exited for some critical reason and will be restarted.), (Recommended Action: Check to make sure the process has restarted. If not, restart manually. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_DUPLICATE_L2_ADJ_SID
### Response:
(Severity: 3), (Category: ROUTING), (Description: Same SR Adj-SID is configured on multiple L2 interfaces.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXMGR-2-LINK_TRAIN_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIE link training failed), (Recommended Action: Please reload the board using the following command: 'reload location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HM-4-FAILED_INIT
### Response:
(Severity: 4), (Category: HA), (Description: HA Health Monitor failed to initialize due to internal software errors), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process hm location <>' to verify that the process is up and running. If it is still non-operational, try doing 'process restart hm location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-GR_LCL_RESTART_COMPLETE
### Response:
(Severity: 5), (Category: ROUTING), (Description: After LDP local restart, LDP GR forwarding state hold timer has expired, and MPLS forwarding is now being updated and reinstated by LDP application. This message appears only if the <Bold>mpls ldp log graceful-restart<NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX-3-LINK_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error has occurred on the link between the bridge and its root port. The message has status and action taken.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-MSTATS_INIT
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to initialize a statistic counter table.), (Recommended Action: Check the status of Metro Stats Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-SPAN_SESSION_DESTROY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A failure has occurred while destroying span session.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-MINOR
### Response:
(Severity: 3), (Category: DIAG), (Description: A minor error was detected if the diagnostic test fails for the specified card such as if a single device associated with the particular diagnostic test has failed.), (Recommended Action: Re-seat the card and retry the test. If the same result occurs after reseating the card and retrying the test, copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APM-5-POWER_SAVING_START
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When the Power-slicing has been initiated, it takes some time for the operation to be completed. Meanwhile no configuration must be made on the LC, otherwise it may cause inconsistency in the node. So a notice message is provided to user, not to do any exit mode operations and configurations for corresponding LC.), (Recommended Action: The message is just for information. To find the current status of the Slice power-saving, 'show apm psa status' can be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-REGISTER_EXTERNAL_PUBLISH_DIFF_ID
### Response:
(Severity: 3), (Category: OS), (Description: try to register a data with diff id), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-HIGH_VOLTAGE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK voltage greater than or equal to the high voltage warning threshold. The CPAK is the pluggable optics on the line cards. The voltage threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_1_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-CPSS_INIT_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: CPSS SDK switch initialization failed. This is a fatal fault.), (Recommended Action: Note the rc code. Root cause needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-INVALID_OBJECT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure MPLS L3VPN VRF-lite for customer edge connectivity?
### Response:
To configure MPLS L3VPN VRF-lite for customer edge connectivity, define the VRF without RD and RT and assign interfaces. vrf MyVRF
interface GigabitEthernet0/0/0/0
vrf MyVRF
ipv4 address 192.168.1.1 255.255.255.0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-MAC_CHUNK_DB_OUTOFSYNC_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: TCAM MAC chunk database is out of sync), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_MACSEC-2-LIC_ENFORCE_OOC
### Response:
(Severity: 2), (Category: OS), (Description: The licensed feature is enabled without appropriate licenses.), (Recommended Action: The customer should either purchase more licenses or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_NO_BW
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-GENERIC_FPD_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was encountered), (Recommended Action: This error might be due to checkpoint initialization , LC ltrace event initialization failures. Please try to upgrade again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_LWM_SEND_EVENT
### Response:
(Severity: 7), (Category: HA), (Description: The msg_send_event function reported an error trying to send an asynchronous message to the specified process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_PTHREAD_CREATE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-AUTH_FAILURE_DROP
### Response:
(Severity: 5), (Category: ROUTING), (Description: The process encountered an error when authenticating an incoming PDU and dropped the PDU. This may be due to misconfiguration on the local or remote system.), (Recommended Action: Check the password configuration on the local and remote systems.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-7-WDSYSMON_ERROR
### Response:
(Severity: 7), (Category: MGBL), (Description: A wdsysmon api call returned an error. This can happen when the state of a node is transitioning e.g. a line card is restarted or the node is not booted. The node id is given by the hexadecimal number after this message and is followed by a more specific error description of the cause of the failure.), (Recommended Action: Bring the node up to IOS-XR running stage and then rerun the PM show command. The node's info should be displayed after the next sample collection interval. If the PM collection for the node is not configured, configure it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-2-IM_REG_FAIL
### Response:
(Severity: 2), (Category: OS), (Description: Internal error registering with infra process.), (Recommended Action: Please restart mbxr_init process to recover and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC_RSRCMON-7-DEBUG
### Response:
(Severity: 7), (Category: SERVICES), (Description: Debug messages), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-RP_BIOS_BOOT_INFO_ERR
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA driver failed to access the CPU Complex FPGA registers to get the information about which BIOS SPI flash was used to boot the running BIOS. This information is used by the output of 'show hw-module fpd', due to this failure, the output of this command will not show current running FPD info for the Backup BIOS image if the Primary BIOS was corrupted.), (Recommended Action: Restart the iofpga_driver process will allow iofpga_driver to re-read this information from the CPU Complex FPGA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: IP), (Description: The server has failed to acquire the required amount of memory), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RIB_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A RIB library call failed unexpectedly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-MPA_SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to use MPA due to an internal software error. The error message describes the error.), (Recommended Action: Please try to recover by doing the process restart of the process that generated the error. If it doesn't resolve the issue, please try to recover the MPA using CLI 'hw-mod subslot <> reload'. Gather the output of the CLI 'show tech-support ethernet interfaces'. If the issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show l2vpn forwarding xconnect' command in IOS XR?
### Response:
The 'show l2vpn forwarding xconnect' command is used to display the L2VPN forwarding information for xconnect instances. It shows the xconnect name, the outgoing interface or pseudowire, the next hop, and the MPLS label used for forwarding. This command is useful for verifying the point-to-point L2VPN forwarding plane.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-SLOT_INSERTION_THRESHOLD_B
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Backplane slot connector has card insertions exceed threshold B per current counter statistics.), (Recommended Action: Give CLI: (admin)# show plugin slot counts Service the backplane slot connector, contact Cisco TAC for assistance. If possible, reduce the frequency of card insertions into this backplane connector. Current insertion counters may be cleared with (admin)# clear plugin slot counts)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-GN2412_CHIP_DOWN_RECOVERY_FAILED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: GN2412 shows the register reading 0xff. Recovery action fails to recover the chip), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV_AGENT-3-OPT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'neighbor' command in IOS XR VPLS configuration?
### Response:
The 'neighbor' command is used under the 'l2vpn bridge group' to specify the remote PE routers that are part of the VPLS instance. It defines the pseudowires that connect the local PE to the remote PEs. Each 'neighbor' statement creates a spoke pseudowire to a remote PE.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CISCOSYSTEMMIB-3-SPAWN
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble in spawning a process.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-3-LARGE_HANDLE
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The replicator library has received an exceptionally large item handle from NRS which may cause conflicts within the replicator library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth collect frequency feature?
### Response:
The MPLS TE auto-bandwidth collect frequency feature specifies how often auto-bandwidth measures the output rate of a tunnel before making a bandwidth adjustment. A higher frequency means auto-bandwidth reacts more quickly to traffic changes, while a lower frequency means bandwidth adjustments occur less often.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-3-SYSDB_BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MFWD-HFR library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-SYSDB_ERR
### Response:
(Severity: 3), (Category: L2), (Description: L2VPN could not register callbacks with SysDB for show command or configuration handling. The text of the message displays the registration operation attempted and decoded SysDB return code.), (Recommended Action: To recover from this state, one may try 'process restart' command. For example, - process restart l2vpn_mgr OR Collect 'show tech sysdb' and 'show tech l2vpn', and contact Cisco TAC support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-CARD_REIMAGE_CFG_DONE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Setting of the reimage attribute on the indicated card has completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to troubleshoot MPLS L3VPN BGP peering issues?
### Response:
To troubleshoot MPLS L3VPN BGP peering issues, verify neighbor configurations and use 'show bgp vpnv4 unicast neighbors' command. show bgp vpnv4 unicast neighbors
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-4-BER_ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified Bit Error Rate Alarm has been declared or released. interface: interface on which alarm is set/cleared alarm: alarm being asserted e.g: SF-BER or SD-BER status: set/cleared), (Recommended Action: If SF/SD-BER alarm is seen: Link quality degraded beyond configured threshold. Check if the peer device is injecting error frames or otherwise check if the cable is faulty.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What synchronization mechanisms are provided by the IOS XR microkernel?
### Response:
The IOS XR microkernel provides the following synchronization mechanisms\n- Mutex (mutual exclusion) locks: Ensures exclusive access to shared data by threads\n- Condition variables: Allows threads to wait until a condition is met\n- Semaphores: Allows threads to wait for a shared counter to become positive\n- Atomic operations: Allows simple operations on shared data without locks\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_SOCK-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialisation of the cHDLC socket process. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-OLD_IDPROM_FORMAT
### Response:
(Severity: 3), (Category: DRIVER), (Description: Outdated IDPROM format is being detect for the indicated card. The card will not operate correct without being upgraded to use the TLV format.), (Recommended Action: Use idprom_tool to upgrade the card to use the TLV format.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver failed to send messaging reply.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-PORT_CLASH
### Response:
(Severity: 3), (Category: OS), (Description: The Linux Packet classifier has detected that a Linux process and and XR process are both bound to the same port. This may cause packets which should be handled by Linux applications to get dropped.), (Recommended Action: One of the processes will need to use a different port. This may be an arbitrarily assigned ephemeral port value, in which case restarting the impacted XR process should get it to use a different value. Alternatively, depending on the impacted Linux process, restarting that may force it to use a different port. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-EVENT_CONN_NOTIFY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: During initialization, CLNS failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-EBS_CPP_HP_FIFO_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Egress Buffer and Scheduling to CPP high priority FIFO full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-3-PTFM_BW_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Interflex Manager failed to get the interface bandwidth from platform at the startup. The process will be automatically restarted, if it keeps restarting with same message *DDTS*), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_QFPCPUCTRL-1-CPU_PAR_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: CPU controller FPGA detected a parity error on the CPU A/D bus during data reception from the CPU.), (Recommended Action: Reboot the board. If the problem persists, replace the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE6_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE6_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-6-INFO_NVRAM
### Response:
(Severity: 6), (Category: SECURITY), (Description: Sufficient NVRAM is not available to perform a system operation. It is possible that the NVRAN process might be temporarily down.), (Recommended Action: 'This message is just for information.No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-MSC_140_POWER_DISABLED_STATE_NOT_RECOVERED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Card stays in power disabled state), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-LAS_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: This is a transient error and it happens when the underlying communication layer, Group Service Process (GSP), is temporarily unavailable.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install remove command in IOS XR?
### Response:
The 'install remove' command is used to delete inactive packages from the router's storage. This helps to free up disk space. Only inactive packages can be removed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DATA_SWITCH-3-LINK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Data Path switch link has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-ERR_NON_EXISTS_ACL
### Response:
(Severity: 5), (Category: OS), (Description: acl string is non-effective. Acl string provided is not mapped to any access-list mentioned for ipv4, so its not effective.), (Recommended Action: When this issue happens, first try to create the acl string match with ipv4 access list and then map it to the LPTS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-6-ENFORCE_EVAL
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled for evaluation.), (Recommended Action: The customer may consider to register for licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-PARSE_FAILED
### Response:
(Severity: 7), (Category: SYSDB), (Description: A pathname was used for a SysDB operation from which the destination node could not be parsed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-JID_UPDATE
### Response:
(Severity: 3), (Category: OS), (Description: Proc table empty.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-SM_CALLBACK_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed to register with Install manager for software change notifications. OBFL manager will restart.), (Recommended Action: If the issue is seen after restart, Please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-3-CFLCT_FORCED_DOWN
### Response:
(Severity: 3), (Category: IP), (Description: The specified IP address conflicts with other IP addresses on the network portion of their IP addresses and has been forced down to prevent multiple operational conflicting IP addresses. This is an inconsistent configuration.), (Recommended Action: Reconfigure the IP addresses that share the common network portion specified.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
netio_debug-3-INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The NetIO debugging partner process initialization failed. This could happen due to errors in various server processes. The error code and its text in the message will reveal the source of the error.), (Recommended Action: NetIO debugging partner process is only needed to capture/log packet info and for debugging purpose only and does not effect system functionality. If the process restarts and this message is not repeating, no actions are needed. If this message recurs that does mean there is an underlying infra components issue, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-HA_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HA test error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_LWM
### Response:
(Severity: 3), (Category: OS), (Description: A call to a LWM interface failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'maximum-prefix' command in IOS XR BGP configuration?
### Response:
The 'maximum-prefix' command allows limiting the total number of prefixes that can be received from a BGP neighbor. If the limit is exceeded, the BGP session can be either torn down or a warning message can be logged, depending on the configuration. This provides protection against a BGP neighbor that advertises an excessive number of prefixes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp neighbor targeted' command in IOS XR?
### Response:
The 'mpls ldp neighbor targeted' command is used to establish a targeted LDP session with a specific neighbor. Unlike link-based LDP sessions, targeted LDP sessions are not tied to a specific interface. They are used in scenarios where the LDP peers are not directly connected, such as in L2VPN and VPLS configurations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-6-FMI_CONFLICTING_CONFIG
### Response:
(Severity: 6), (Category: SECURITY), (Description: Two Firewall Management interfaces of the same type (follow-active or follow-standby) have been configured on the specified firewall. Both of the interfaces will be brought down until the conflicting configuration is removed.), (Recommended Action: Remove the conflicting configuration from one of the Firewall Management interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-ROOT_USERDB_INIT_PATH_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Locald failed to create/remove the root user database on the disk0. This will affect authentication to ksh since it refers to this database.), (Recommended Action: As a workaround an admin could create this directory in disk0 himself. This should get around the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_14_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNLC_FPD-3-CPMI_INIT_FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-MQ_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_OUT_MEM_CORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast output memory correctable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-6-ENFORCE_GRACE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled in grace period.), (Recommended Action: The customer may consider to purchase licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: SPA Jacket error), (Recommended Action: When errors occur in jacket, it is very likely the jacket process will restart itself. please collect output of <CmdBold>debug sip-pm <> <noCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-TAP_UPDATE_SUSPENDED
### Response:
(Severity: 4), (Category: FABRIC), (Description: TAP read consumed too much time.), (Recommended Action: collect the logs mentioned above)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-FSDB_SERVICE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FSDB was not able to connect with the above error condition.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_EVM_ATT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register a handler for the specified class of event. This is an initialization error and implies that IS-IS will not be able to operate correctly. The IS-IS process must be restarted in order to recover. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_AD-3-OUT_OF_LABEL
### Response:
(Severity: 3), (Category: L2), (Description: 'This error happens when the system had failed to allocate a label block ' 'as it may be running out of the label blocks. ' 'Note that when label blocks are freed, they go to zombie state for ' '30 minutes. During this period, repeated addition/removal of the same ' 'configuration will result in allocating different label blocks each time. ' 'This can lead to running out of label blocks quickly '), (Recommended Action: 'Please remove l2vpn config and wait for 30 minutes until the zombie ' 'pool is cleared and put back the config. ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE2_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE2_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-ERR_PULSE
### Response:
(Severity: 3), (Category: L2), (Description: IPC thread received an async event pulse for which there is no handler under FSM Status msg handlerroutine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_EXMEM-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different types of BGP path attributes?
### Response:
The main BGP path attributes are\n- Weight (Cisco proprietary)\n- Local Preference\n- AS Path\n- Origin\n- Multi-Exit Discriminator (MED)\n- Community\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RSP CPU controller driver version is not compatable with the hardware version.), (Recommended Action: If a redundant RSP card has been configured force a failover with the following command in admin mode 'redundancy switchover'. Upgrade the RSP CPU controller CPLD image on the RSP that reported this problem, followed by reload of that RSP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-7-FDOPEN
### Response:
(Severity: 7), (Category: MGBL), (Description: 'The call to function fdopen failed. The error message is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-REPRGM_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: TCAM entries are reprogrammed every 24 hours to ensure accuracy of hardware entries programmed earlier on user configuration or system changes. This message lists the ACL for which errors have occured during reprogramming.), (Recommended Action: Detach ACL in the error message from all interfaces of the line card where issue is seen. Now, re-attach ACL to the interfaces. Note that, there is a security hole during re-attachment operation window for these interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-SHOW_WARNING
### Response:
(Severity: 4), (Category: ROUTING), (Description: The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.), (Recommended Action: Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCC-2-FAILED_ID_HW
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'There was a problem while identifying Hardware in the specified location.'), (Recommended Action: 'Contact TAC')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-7-DEBUG_INSTALL_WILL_REBOOT_NODE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: DSC process is not reloading node since a reload install operation is ini progress. Install will reload node after install complete.Heartbeat loss messages are expected during this time.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_0_SENDING_AIS
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in T1 and E1 modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-XFP_WARN_RX_PWR
### Response:
(Severity: 4), (Category: L2), (Description: XFP hit/recovered RX Low power warning.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM_COMMON-6-MOVE_DONE
### Response:
(Severity: 6), (Category: MEDIA), (Description: Previously due to some error, NVRAM dump file was collected. At the time of collection, permanent storage was not available so it was saved at /tmp directory. To avoid the loss of this file, this file was copied out from /tmp directory when permanent storage became available), (Recommended Action: Collect dump file from permanent storage for further inspection. Collect syslog)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-3-EDM_ERR
### Response:
(Severity: 3), (Category: MEDIA), (Description: Capture EDM errors for reboot history.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-6-THRESHOLD_CLEARED
### Response:
(Severity: 6), (Category: INFRA), (Description: The specified SLA threshold has been cleared after a breach.), (Recommended Action: None. The clearing of this threshold indicates that the performance of the network has returned to above the threshold level after a previous breach.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT_FIFO_OFLOW_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt fifo overflow on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-GRP_GSP_NODEID_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: This message may appear due to transient error and can be safely ignored as sysDB will retry the find operation. However, if this repeats there could be an issue with the GSP or sysdb.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN-3-INVALID_ASIC_ID
### Response:
(Severity: 3), (Category: L2), (Description: The ASIC Id is not valid, this might be a program level issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-ERR_CHKPT_INSERT
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq Checkpoint Insert error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CLOSE_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A file involved in the current request or operation could not be closed. This will not affect the current operation, but subsequent operations may be affected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMED_EA_ATTACH
### Response:
(Severity: 7), (Category: HA), (Description: The event detector has failed to attach an event handler for asynchronous messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-EVM_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when creating Event Manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_EXPLICITROUTE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified tunnel explicit-route has changed.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLPROD-6-MSG_GENERIC_FUNC
### Response:
(Severity: 6), (Category: OS), (Description: BCDL producer dll encountered an error.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-6-PA_FF_OPEN
### Response:
(Severity: 6), (Category: OS), (Description: An internal error was detected when trying to connect to the Port Arbitrator as a Flow Forwarder.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPI4_SYNC_CHECK
### Response:
(Severity: 4), (Category: L2), (Description: The SPA bridge controller detected a SPI4 error between itself and QFP), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. before reloading the line card If this problem persists, reload the line card using <CmdBold>hw-module location <>/<>/CPU0 reload<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: An unexpected internal error has occurred in the SESVI EA process. The process will restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-INITIALIZATION_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Service-Layer library initialization failed. This mostly would be a non-recoverable internal error that requires Cisco support.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-3-LOG_ERR
### Response:
(Severity: 3), (Category: INFRA), (Description: please see show kim log for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-DAEMON_ERR_SYSDB_RESUME
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while resuming configuration before IEP process exits.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show tech-support sysdb for further analysis of the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IP_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Here is a list of possible reasons for this message (not all-inclusive). - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Resource limitations. This condition indicates a problem where the software has limited resources to operate on.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 show memory summary </RP> <LC> show cef ipv4 location <> show memory location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-0-BAD_ID_HW
### Response:
(Severity: 0), (Category: DRIVER), (Description: Hardware in the specified location could not be identified as genuine Cisco product by card manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-AIB_INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'AIB Initialization failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-SID_CFG_CONFLICT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The same prefix SID cannot be configured (either as index or absolute) value on more than one prefix on the router. The prefix SID will not be used until this config inconsistency is resolved.), (Recommended Action: Fix the configuration such that the SID value does not conflict. Ignore if this is already done and warning will repeat until this is fixed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the two types of LSPs used in IS-IS and what is their purpose?
### Response:
The two types of LSPs are: 1) Non-pseudonode LSPs which are generated by each router and describe the state of the router's links to its neighbors. 2) Pseudonode LSPs which are generated by the DIS and describe all routers attached to a broadcast network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-3-REGISTER_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: registration has failed and the CLI will exit), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-CARD_CLOCK_FAULT
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card clock is reporting fault condition. This is a fatal failure condition that might point to HW problem. CCC driver state machine will try to recover from the failure by reloading the card.), (Recommended Action: If CCC driver power-off the card because the problem persist after all the recovery reloads have failed, then contact with Cisco support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FABRIC_PRGM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed programming batch in fabric from PD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_14_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER_SNAP-6-LIMITED
### Response:
(Severity: 6), (Category: OS), (Description: A non-invasive voluntary coredump was requested by the process, but was declined since this would exceed the configured rate-limit.), (Recommended Action: None, this is benign.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-3-PVC_VC_CLASS
### Response:
(Severity: 3), (Category: L2), (Description: A vc-class was configured on an interface but couldn't be applied. It could be a system-level issue or some issue with InARP itself.), (Recommended Action: If the message keeps on coming for almost every interface, collect require_info and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-STATSD_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An operation failed during the Stats Server Connection opening.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAP_LISTEN-3-EVENT_MGR_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A problem occurred while calling the event_manager_create() API. or a connection to the event_manager failed during the initialization of the SAP listener.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes sap_listen error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes sap_listen error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Using the Job ID from the above command, please run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sap trace detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sap trace detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-MEMBER_CAPS_ADD_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to set caps.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_REFERENCES_NULL
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-CONFIG_FAIL_RESUME
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while attempting to return the status of a config apply request. The CLI may be blocked, or may have returned an error despite the operation having succeeded.), (Recommended Action: The edpl_ma process should be restarted using the following command: - process restart edpl_ma)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-6-CEMGBL_GOT_NOTIF_FROM_ETHSERVER
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Cemgbl got notification from ETH_SERVER and displays the count and 1st index of it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-CPUSHARES_LIMIT
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting more CPU shares than the system has available for virtual services.), (Recommended Action: Deactivate any other virtual services to free up CPU share resources and activate this virtual service. If that does not address the problem, then enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-6-EVENT_BLOCK
### Response:
(Severity: 6), (Category: OS), (Description: An error occured whilst Procfind was waiting for messages, Procfind ignored the error and continued to wait for more messages.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-7-UNKNOWN_NODE_TYPE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the card type is invalid, or the infrastructure is behaving incorrectly. The current request or operation may not be carried out.), (Recommended Action: Upgrade to latest OS release. Check for unsupported hardware.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-6-ROOT_DEVICE_BUS_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A PCIe bus error has occurred on the root port. The message has the root device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDR-3-INIT_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: CDR init failed for that specified slot/cdr'), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SYSMGR_PROC_CLEANUP_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A failure occured while trying to ask sysmgr for cleanup events for package un-installs.), (Recommended Action: Check whether policy_repository process is running properly by command 'show process policy_repository' Check the install logs if all the packages are downloaded and install operations completed properly)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_POLICY-3-ORA_INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does OSPF handle virtual links and when are they used?
### Response:
Virtual links are used to connect an area to the backbone (area 0) if no direct physical connection exists. They are configured on ABRs. A virtual link is a logical connection that acts as an unnumbered point-to-point connection. Virtual links cannot be configured through stub areas.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-DEPRECATED_API
### Response:
(Severity: 3), (Category: LICENSE), (Description: The platform code is calling a deprecated function. The code needs to be changed to call the new function), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMIO-3-INVALID_SLOT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Invalid Slot Type.), (Recommended Action: Correct slot should be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: L2), (Description: PLIM process encountered an error during software initialization. ltrace initialization is failed. So it will not generate any traces.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. There was problem with hardware or software initialization. This problem can be resolved by reloading the LC 'hw-module location <> reload' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PORT_CFG-3-INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A submodule was unable to initialze due to the specified error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_MASTER-2-INVALID_THREAD
### Response:
(Severity: 2), (Category: OS), (Description: Detected single-threaded RSI Master code running on an unknown thread. This concurrency can result in corruption. %d/%d indicate actual tid/expected tid.), (Recommended Action: Collect RSI traces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-DC_NOT_PRESENT
### Response:
(Severity: 4), (Category: DRIVER), (Description: CCC Driver has detected that the daughter card is either disconnected or not present.), (Recommended Action: Please inspect the card and the card connectors for physical damages and ensure daughter card is connected properly. Physically OIR the card and check if the issue persists. required_info: Collect all syslogs and trace messages for CCC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PFI-3-GET_PIC_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to get npu id from pic. The returned error code should indicate the reason for the failure of the api. This is a transient error in the system likely due to some config events. The client logging this error should retry the api and/or handle this error accordingly. If this error is seen persistently, Initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_DPM-6-DISCOVERY_DOWN_NO_NBR_INFO
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The Satellite is missing neighbor information, so if this satellite is part of a chain, only the current satellite rather than the full chain is undiscovered. Note that if undiscovery of the chain of satellites is required, then the discovery protocol will time out for those satellites after 30 seconds and cause undiscovery.), (Recommended Action: Check the transport layer between the host and the satellite and ensure that the satellite is working as expected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FORGE_CGN_HA_AGENT-3-HEARTBEAT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Heart beat responses are missed from CGV6 cores.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-6-CUSTOMER_DELETED
### Response:
(Severity: 6), (Category: IP), (Description: The administrator deleted a peer MAG from the LMA configuration.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INVALID_DEACT_MSG
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service deactivate message was received, however, the data it contained could not be interpreted.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_PAK_CLIENT_CONN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-INITIALIZATION_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: The QSM process wasn't able to startup up due the indicated failure during initialization. A restart of the process will be attempted. If the process can not be sucessfully started after several attempts, the board will probably be unusable.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-PAYG_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The port is enabled without the necessary PAYG license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-PATH_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Dumper copies a core dump to /tmp/dumper. There are 2 reasons for this to happen: a) No space in /tmp/dumper and exception paths. b) A core is already getting copied to /tmp/dumper.), (Recommended Action: Please make sure that there is enough space in the configured exception paths and /tmp/dumper. If the issue is not resolved, please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-7-DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when cleaning up debug.), (Recommended Action: This is not a critical error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails due to failure during forwarding feature programming. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-LEAF_DEPEND_CLEANUP_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: This is an unexpected state where after leaf deletion, leaf still has some dependent paths pointing to it. This could prevent the leaf from getting freed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_LOSS_OF_SYNC_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on NPU-1 interface on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_1_XAUI_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-1 from XAUI on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_DEBUG_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-4-MOVE_FAILURE
### Response:
(Severity: 4), (Category: MEDIA), (Description: Previously due to some error, NVRAM dump file was collected. At the time of collection, permanent storage was not available so it was saved at /tmp directory. NVRAM process tried to move this file out to permanent storage but it failed. This file maybe required to identify if there is real issue with NVRAM device. Collect dump file from /tmp directory for further inspection.), (Recommended Action: Collect dump file from /tmp for further inspection. Collect syslog)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-PW_RECOVERY_INVALID_TTY
### Response:
(Severity: 6), (Category: MGMT), (Description: This is expected when trying to invoke password recovery on non-console), (Recommended Action: 'Debug message only. No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_RELOAD_BOARD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and need to reload board), (Recommended Action: An error has happened and board is reloaded. Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-4-ERR_NETIO_CONN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Cannot connect to netio pak server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_RRW_LOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to aquire rrw lock to the request record area in shared memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-3-LTRACEINIT
### Response:
(Severity: 3), (Category: ACL), (Description: Initialization of the ltrace debug capability failed with the reason displayed in the error message. This failure does not impact the functionality of ipv6 access-lists. However, debugging of any issues will be impaired.), (Recommended Action: This message may occur during process initialization. Please try restarting the process that issued this error message with the command. <CmdBold>process restart <process_name> location <location><NoCmdBold>. Process name should be printed in the message already.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_XAUI_RDY_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-1 XAUI not ready on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-MSG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while handling messages received by locald.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA-4-ERR_SYSMGR
### Response:
(Severity: 4), (Category: L2), (Description: The process was initialized successfully but was unable to inform System Manager of the success.), (Recommended Action: Check on the status of the sysmgr process on the node from which the error was reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_PKT_F3_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 3 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-DATAPLANE_BATCH
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The VPDN MGR failed to program the dataplane for 1 or more sessions. These sessions must be distributed from VPDN MGR to all instances of L2FIB on all nodes. This failure may affect the establishment or tear-down of 1 or more sessions. In the case of tear-down, these resources may be leaked.), (Recommended Action: Allow sessions to re-establish. For sessions that fail to tear-down, either restart the vpdn_mgr process or the l2fib_mgr process on all nodes. You may also clear L2FIB tables. This may have significant service disruption. If the problem persists, contact technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-GEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-OPEN_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Could not open a file), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the optics driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIRROR-3-ERR_SYSDB_EDM_REG
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Failed to register edm with sysdb'), (Recommended Action: Collect the following details: 1. Command issued 2. show mirror trace. 3. console logs. 4. If config is restored from file, then filename/contents. 5.If command failed at startup, show config trace and show config failed startup.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUMI-3-SECURE_BOOT_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: A Secure Boot validation error has been detected on the indicated card. The details are provided together with the message.), (Recommended Action: The recovery action depends on the type of failure reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_1_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TTI_MISMATCH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_14_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE interarea tunnels feature?
### Response:
The MPLS TE interarea tunnels feature allows MPLS TE tunnels to be established across IGP area boundaries. This enables TE to operate in multi-area environments. Interarea TE tunnels comprise hops in different IGP areas and are signaled as a contiguous end-to-end LSP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-IDT_DIFF_NODE_TYPE
### Response:
(Severity: 7), (Category: HA), (Description: Just debug information to know that active RP is of different endian type.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ip-ttl-propagate' command in IOS XR?
### Response:
The 'mpls ip-ttl-propagate' command is used to enable the propagation of the IP TTL value to the MPLS TTL field when an IP packet is imposed with an MPLS label. This allows the TTL to be decremented at each hop in the MPLS network, providing a mechanism to prevent forwarding loops.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-EVM_CREATE
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: Could not connect to event manager.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-FAB_UNICAST_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A problem is detected by loopback test to the Crossbar chips on this RSP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-OOR_VRF_BSR_CRP_LIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: OOR Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-1-FFI_LINK_BRINGDOWN
### Response:
(Severity: 1), (Category: FABRIC), (Description: A fabric link was brought down due to too many errors.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-3-TLVLIB_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when initializing(tlvlib)in PA Flow Forwarder I/O thread.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CLIENT-6-GEN_INFO
### Response:
(Severity: 6), (Category: FABRIC), (Description: FIA driver operation information.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-3-REPLAY_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Validation after Bundle replay failed.), (Recommended Action: Manual bundle shut is needed to avoid traffic impact.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature less than or equal to the low temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-7-ISM_PD_LIB_CE_CONN_WARN
### Response:
(Severity: 7), (Category: INSTALL), (Description: During ISSU, verifying the CE connection's having that all active RPs are connected to active SC. If there is no valid active CE connection between active RP and active SC then that particular racks goes into isolated state.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-1-ERR_PD_PROG_DEFAULT
### Response:
(Severity: 1), (Category: OS), (Description: An error was returned when programming default pre-fib entry. process exit is triggered to recover.), (Recommended Action: *Check why default entry could not be programmed*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-6-IMA_BLOCK_SIGN_VALIDATION_DISABLE
### Response:
(Severity: 6), (Category: MGBL), (Description: A failure occurred during Runtime integrity validation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-DELAY_API_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified error happened during the intialization of the delayed statistics freeing utility.), (Recommended Action: Please collect output of the following commands: show platform show platform vm show log show process blocked location <> show process fib_mgr location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-FREE_ARENA_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN failed to free the arena's virtual range back to the server. This is possibily an indication of shmwin memory corruption), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin trace all location 0/x/CPUx - dumpcore running <process name> location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-NULLCHARMISSING
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Parser messages must be null terminated.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: Memory allocation failed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-REDUNDANCY_STANDBY
### Response:
(Severity: 7), (Category: OS), (Description: Node is redundancy standby state, so can't log to other node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-7-HW_INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the Platform LC Hardware in L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-CLKCTRL_RX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Timing and CPI controller FPGA reported that the data it received had parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-MPLS_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current mpls profile and the newly configured mpls profile. Needs attention with RSP reload.), (Recommended Action: System is inconsistent. Need to reload the RSP in order to activate the new mpls profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-SYSDB_BIND_ERR
### Response:
(Severity: 3), (Category: L2), (Description: L2VPN attempted to bind with SysDB at the specified path and could not establish a connection. The text of the message displays the specific bindpoint and the decoded SysDB return code. As L2VPN was not successful in connecting using this path, configuration or show commands specific to this path will not be handled by L2VPN.), (Recommended Action: To recover from this state, one may try 'process restart' command. For example, - process restart l2vpn_mgr OR Collect 'show tech sysdb' and 'show tech l2vpn', and contact Cisco TAC support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_HWOFFLOAD-4-LC_TIMER_SCALE_LIMIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: LC level scale limit for this timer has been reached.), (Recommended Action: All new sessions on this LC will be kept in ADMIN-DOWN state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_SYSDB_REG_NOTIF
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB external data manager failed to register for notifications for the specified path. Process would continue to run normally, except that SNMP traps will not be generated for changes in fabric state.), (Recommended Action: This message indicate that trap notifications of the operational states of planes and bundles would not occur. If snmp managability is not enabled, this message can be ignored. However, if this functionality is necessary then restart the process by issuing the following command at the CLI of the active RP after collecting all the output of all the specified commands. 'admin process restart fsdb_server/fsdb_aserver loc <loc>' Restart fsdb_server if the bundle state traps are missing else if plane state traps are missing restart fsdb_aserver. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of SNMP in network monitoring and management?
### Response:
SNMP (Simple Network Management Protocol) is used to monitor and manage network devices. It allows network administrators to collect information about device status, performance, and configuration, as well as modify device settings remotely.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARBMGR-4-INIT_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: An unexpected init error condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CVAC-4-CONFIG_DONE
### Response:
(Severity: 4), (Category: MGBL), (Description: The CVAC (Cisco Virtual Appliance Configuration) subsystem read and applied router configuration from the specified file, which will now be removed from the system for security. More information can be found in the provided file or CLI command.), (Recommended Action: Informational message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-DOWNLOAD_METHOD_ERR
### Response:
(Severity: 5), (Category: L2), (Description: The specified download method is not supported), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-NOT_MONITORING_TEST
### Response:
(Severity: 4), (Category: DIAG), (Description: The specified test number cannot be used as a health monitoring test.), (Recommended Action: Nothing. The system is working properly and the specified test cannot be configured as a health monitoring test.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-SYSDB_TUPLE_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Invalid sysdb tuple), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink_CLNT-3-MSG_SEND
### Response:
(Severity: 3), (Category: L2), (Description: Could not retrieve bundle info. Received error value On sending message to the channel.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel primary feature?
### Response:
The MPLS TE auto-tunnel primary feature enables the automatic creation of primary MPLS TE tunnels between tunnel head-end and tail-end routers. It simplifies the provisioning of TE tunnels by automatically creating them based on a template configuration. Auto-tunnels are created to next-hop routers learned via IGP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-GROUP_MSG_LONG
### Response:
(Severity: 4), (Category: ROUTING), (Description: A 'who has this' dll message was longer than its content implied. This indicates either a corruptions of the message itself or a failure of the client to build the message correctly.), (Recommended Action: Observe system for other failures contact support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-NON_COMPLIANT_PS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Should a non-Cisco power supply be installed into the Cisco QQ chassis, upon detection as non-compliant, IT WILL BE SHUTDOWN. Please note that using non-Cisco power supplies MAY RESULT IN COMPLETE CHASSIS SHUTDOWN due to insufficient power), (Recommended Action: Insert Cisco power supply)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: Ingressq Seal ASIC error halt occur.), (Recommended Action: If it is possible to isolate the trigger point for the sn link error, collect all the necessary condition that caused the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_MQ_SEQ_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 1 MQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PMLIB-6-WM_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Platform Manager client library is indicating the usage level of buffer memory.), (Recommended Action: This message might be seen when scale configs are applied. If the buffer usage is reducing in some time, no action needs to be taken. If the buffer usage is continuously increasing over a period of time then it could be an indication of the buffer stuck for some reason. Check if the process is blocked using- 'show process blocked location <r/s/i>' Please collect output for 'show log location <r/s/i>' 'show memory summary location <r/s/i>' 'show controller pm trace error location <r/s/i>' from that location. 'show controller pm trace stats location <r/s/i>' from that location. 'show tech-support vkgpm location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-4-ERR_SYSDB_EVENT
### Response:
(Severity: 4), (Category: SECURITY), (Description: Sysdb subsystem sent a notification after a configuration change. This notification has an configuration change type that is not known to SSH. So, the configuration notification received has not been processed and configuration change applied.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB-3-LTRACE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an IPv6 address on an interface?
### Response:
To configure an IPv6 address on an interface, use the 'ipv6 address' command in interface configuration mode. RP/0/RP0/CPU0:router(config)#interface GigabitEthernet0/0/0/1
RP/0/RP0/CPU0:router(config-if)#ipv6 address 2001:db8::1/64
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_WRITING
### Response:
(Severity: 7), (Category: MGBL), (Description: Writing value to calendar chip at offset.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-RUN_MINIMUM
### Response:
(Severity: 6), (Category: DIAG), (Description: Minimum Diagnostic is running on the card), (Recommended Action: Nothing. This is an informational message and the system is working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-7-SOCKET_INIT
### Response:
(Severity: 7), (Category: IP), (Description: An software error occured when the TCP process do socket related initialization.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-DSP_IMG_CORRUPT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: --), (Recommended Action: Install the image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-3-RELOAD_LC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The LC needs to be reloaded for the configured qos shaping granularity to be applied.), (Recommended Action: Exit the Config-terminal. Reload the Linecard using 'hw-module location <loc> reload' option.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-PCI_SWITCH_FAULT
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC FPGA detected fault on the PCI Switch device. This is an indication that one of the PCI Switch Port detected a Lane Down or Fatal Error condition. This can result in card going to POWERED_OFF state if the fault is persistent.), (Recommended Action: Try reloading the card using 'hw-module location <> reload'. If multiple card reload operation cannot fix the problem, check if physical OIR can address the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-6-PIFIB_MSG_TIMEOUT
### Response:
(Severity: 6), (Category: OS), (Description: The PA failed to receive a response to a critical Pre-IFIB update.), (Recommended Action: This is handled by assuming that the update was installed but the response was dropped. The update may have not been installed due to failures which are detected elsewhere.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_THREAD_MUTEX_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while creating a mutex for use by a client with the specified ID. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_POLICY-3-ORA_BUILD_ERR
### Response:
(Severity: 3), (Category: L2), (Description: There was an internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-EVENTMGR_CREATE_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: The IPV6_MA process failed to create the event manager.), (Recommended Action: The process would recover itself from this error by itself as there is recovery mechanism. If the error is still seen restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BLWM-4-BATCH_CONFIG_REPLY_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: A BLWM-enabled server failed to send a reply about batch configuration to the client. The client might have restarted and this could be a transient error. Wait for the client to restart and reestablish connection with the server.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TP_SW-4-CLIENT_HB_TIMEOUT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that HB is timed-out for TP-LXC client), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-EA_EVM
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that the event processing infra has returned an error. Particular reason is included in the message.), (Recommended Action: Allow PBR EA to restart with the command <CmdBold>process restart pbr_ea location <node id><NoCmdBold> If the problem persists, contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-1-ALL_FANTRAYS_OFF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Two possibilities to this message 1) An alarm has occured. Software cannot access all fans from all trays. This could be caused by fan tray loss power or individual fans were not running. User will have 45 seconds to replace a fan tray. If no action is taken within 45 seconds, the chassis will be shut down. 2) A previously occured alarm has been cleared. Software has detected that all fan on all trays failed condition is cleared), (Recommended Action: Two possibilities to this message. 1) An alarm has occured : Replace or OIR a fan tray within 45 seconds. 2) A previously occured alarm has been cleared : *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-STATUS_MUTEX_UNLOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver was unable to unlock the status variable for the interrupt thread.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-INSTDB_BUILD_ERROR
### Response:
(Severity: 7), (Category: INSTALL), (Description: INSTDB files may be in an inconsistent state due to error encountered while creating them. This issue may affect sanity of install infrastructure data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_SHUTDOWN_ON_MULTIPLE_RELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node has already undergone mutilple reboots and has reached node's reboot threshold limit of 6. In order to avoid further disruptions to the netwrok due to this node, its better to shut (power) down this node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-6-BEST_MASTER_CLOCK_REMOVED
### Response:
(Severity: 6), (Category: L2), (Description: There is no longer a best master clock available to PTP.), (Recommended Action: This message is for information only, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-5-INVALID_FLOW_TYPE
### Response:
(Severity: 5), (Category: OS), (Description: The flow type information is not valid.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-HANDLE
### Response:
(Severity: 4), (Category: OS), (Description: An Event Manager call was made with an invalid or corrupted event manager handle.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_REMOTE_CRITICAL_EVENT
### Response:
(Severity: 6), (Category: L2), (Description: The remote peer has indicated a critical event.), (Recommended Action: No specific IOS-XR action needs to be performed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_CPU_FIFO_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS to CPU FIFO multiple bits error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_9_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-MULT_DEFAULTIFIERS
### Response:
(Severity: 7), (Category: SYSDB), (Description: Another process has already registered a default provider function on this path. It is not possible to have multiple default providers.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-3-SW_INTERFACE
### Response:
(Severity: 3), (Category: L2), (Description: Internal software error in interface state.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_rio_netio-3-CAPS_UNBUILDER_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: The service ingress diversion NetIO DLL capsulation unbuilder function failed. Service ingress diversion in NetIO for the specified interface will not be removed from NetIO process.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-FANTRAY_VER_MISMATCH_CLEAR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: All fantrays are same version.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-RESYNC_FAILED
### Response:
(Severity: 4), (Category: SERVICES), (Description: An error has occurred following a restart of RSPP MA in the reconciliation of persistent data structures with the current configuration. Packet diversion may now be inconsistent.), (Recommended Action: Restarting RSPP MA may clear the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when cleaning up debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-DATABASE_RESET_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: After a modify rollback failure, QoS EA will attempt to reset its database, but this reset attempt failed. The database for the said interface might be in an unknown state. Neither the old policy nor the new policy is applied in hardware for this interface.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-VER_SET_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: bfm encountered an error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-MRID_REMOVE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-INIT_IFMGR_CONN_CREATE_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Process failed to creat a connection to Interface Manager while applying encapsulation config. This could be due to invalid or corrupt arguments being passed or memory allocation failure for which there is no current handling, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-SEND_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: Failed to send a message out of the given interface. The message has been lost, and will not be delievered to the remote peer.), (Recommended Action: Resynchonrisation mechanisms should ensure subsequent messages are correctly sent. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE affinity feature?
### Response:
The MPLS TE affinity feature allows MPLS TE tunnels to select or avoid links based on link attributes called affinities or admin groups. Each link can be assigned one or more affinities, and tunnels can be configured with affinity requirements specifying which affinities to include or exclude. This provides granular control over tunnel paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-3-PACKET_CONN
### Response:
(Severity: 3), (Category: L2), (Description: The fr_socket process failed to establish connection with packet manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
protect_debug-7-DUMP_HANDLE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_PFILTER_EA-3-ERR_APPLY_ACE_MOD
### Response:
(Severity: 3), (Category: L2), (Description: 1) An ACE modification can fail in apply/commit phase because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. c) IPv6 address compression table is full.), (Recommended Action: 1) When this error occurs the running-config will not be in sync with line card ACL hardware programming. 2) If the ACL could not be removed from hardware a line card reload is recommended.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-4-VM_INSTALL_STATUS
### Response:
(Severity: 4), (Category: OS), (Description: VM install/upgrade/unistall status.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-THREAD_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: One of the threads for statistics collection could not be started.), (Recommended Action: This message will be displayed immediately before the failing process restarts. The restart may clear the issue. If it does not, then the following action should be taken. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL1_LO_EOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL1_LO_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-INSTALL_IS_TO_SUSPEND
### Response:
(Severity: 4), (Category: INSTALL), (Description: The incremental install operation will be suspended indefinitely, at the pre-defined suspension point. User needs to issue 'install resume' in admin mode in order to resume the operation.), (Recommended Action: Do 'install resume' in admin mode, whenever ready.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-DEV_XFP_SUPPORTED_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An XFP supported error was detected during XFP initialization. This error is reported when the XFP type can not be determined or it is not supported on the platform. The XFP is the pluggable optics on the line cards. XFP initialization may happen when linecard boots up, XFP OIR and line card process restart. The optics will not be enabled if an XFP supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the XFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-AGG_BUN_HW_REPROG_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: There has been an internal error while reprogramming HW resources as a result of bundle membership changes.), (Recommended Action: *SUPPORT* *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-MAX_ENABLE_RETRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Reached the maximum number of retries to enable multicast and), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_HW-2-ERROR_TLU_ALLOC
### Response:
(Severity: 2), (Category: ROUTING), (Description: Hardware memory allocation for table lookup unit (TLU) failed. This can be because the system has more forwarding entries than supported limits or there is a software defect.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth underflow feature?
### Response:
The MPLS TE auto-bandwidth underflow feature allows auto-bandwidth to react more quickly to drops in traffic flow by triggering an immediate bandwidth adjustment when the measured rate drops below a configured underflow threshold. It aims to free up bandwidth on the tunnel path more promptly when traffic decreases significantly.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSI_EA-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an informational message in the CSI EA to indicate that an error was seen during init operation. A return code is returned which can do a retry or exit based on if error persists.), (Recommended Action: Please collect the console log,)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
aaa_task-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error message from AAA task debug module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_MIB_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the DLL. This resulted in the DLL not being loaded into the SNMP agent, and thus the MIB services will not be available.), (Recommended Action: Restart the snmp process reporting the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-UNBIND_MTD_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Unbind MTD failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-6-INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the platform L2FIB LOCSW component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-SESSION_PROTECTION
### Response:
(Severity: 5), (Category: ROUTING), (Description: An informational LDP notice was generated for a Session Protection event. This message appears only if the <Bold>mpls ldp log session-protection<NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_DLL_UNKNOWN_FUNC
### Response:
(Severity: 3), (Category: MGBL), (Description: 'An error occurred when trying to locate the dll function in DLL.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-6-INFO_HOLDTIME
### Response:
(Severity: 6), (Category: IP), (Description: The holdtime has been set to a value which is less than (or equal to) twice the hello time. This is not recommended as any lost packet may result in an unnecessary state change.), (Recommended Action: Change the holdtime to be greater than twice the hellotime.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALID_ORDER
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen server obtained an incorrect order list entry from an internal order file. This may result in the show run output to have a different ordering than intended.), (Recommended Action: Collect the show version, show logging, show nvgen trace output, show runnning output, show config history and show tech-support sysdb. Contact TAC representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-INSTALL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error while performing upgrade/downgrade/install operation), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE6_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE6_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MADISORN-4-EVENT_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: An invalid event was recieved. These are ignored.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_BAT_FAIL_B
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Shelf Battery Failure B alarm occurs when battery B is down or not detected. This could be because the battery is removed or is not operational.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-XBAR_TIMEOUT_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an crossbar timeout error on link 1), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-INTF_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SFP or XFP or CFP or QSFP entity is inserted into the line card.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the LDP IGP Sync feature in Cisco IOS XR?
### Response:
The LDP IGP Sync feature ensures that LDP is fully operational on a link before the link is used for forwarding traffic. It prevents traffic loss during IGP convergence by delaying the use of a link for forwarding until LDP has converged on that link. This feature is enabled using the 'mpls ldp sync' command under the interface configuration mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-XAUI_0_FRAG_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XAUI interface to NPU-0 reported fragmentation error on TX side on bridge instance - 3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-ISSU_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Network Processor Initialization encountered a critical error on V2 that renders the ISSU to abort.), (Recommended Action: Abort the current ISSU and repeat the ISSU orchestration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-LTRACE_BUFF_CREATE_INIT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Trace buff add failed as trace initialization is not done.' 'process will continue without any error.'), (Recommended Action: 'Trace initialization will be done and then this buffer wil be addded.' 'If error persists.Collect the error log with return value' 'and core dump of the process and contact tac')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-ANR_WHITELIST_FILE_ERROR
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'The autonomic registeration authority encountered ' 'file error when reading from whitelist file, ' 'check the file name and its contents'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-5-UNSIGNED_PACKAGE
### Response:
(Severity: 5), (Category: OS), (Description: A software package without a code signing certificate has been loaded.), (Recommended Action: Take note of the service container and software package. Verify the software package is expected to be unsigned and has the appropriate contents. Uninstall the package if unsure of the package origins.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-FAB_LICENSE_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is enabled without having valid license. This feature is per RSP3-Lite based, so in a HA setup 2 licenses required. In stand alone setup 1 license is enough. Use 'admin show license' CLI to check license status.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FT-4-FAN_TRAY_0_REMOVED
### Response:
(Severity: 4), (Category: LIBRARY), (Description: FT0 removed, FT1 and FT2 OIR won't be detected in absence of FT0. Insert FT0 back.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_IO-3-PA_NULL_HANDLE
### Response:
(Severity: 3), (Category: IP), (Description: The ipv4_io process was given a NULL handle by the port arbitrator.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVSAT_CTRL-4-RESPAWN_THRESHOLD_EXCEEDED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The Control process has exited and respawned too many times in factory mode. This prevents satellite mode from operating correctly, so the router will enter standalone mode.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-4-FAIL_MEM
### Response:
(Severity: 4), (Category: SERVICES), (Description: CGN modules are failed to allocate memory due to low memory conditions in the System.), (Recommended Action: Increase System Memory or stop some applications which are not required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-6-POWER_UP_DATA_ZONES
### Response:
(Severity: 6), (Category: LIB), (Description: 'Request sent to power up data zones'), (Recommended Action: Check if card shows OPERATIONAL in show platform)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-USER_NOT_AVAILABLE
### Response:
(Severity: 4), (Category: SNMP), (Description: SNMP user configured with aes and 3des encryption will be available for snmp operations only if crypto pie is installed on the router. Though the user config will be available in the router, user will not be operational.), (Recommended Action: If snmp user with 3des and aes encrypiton is required for snmp operation then please install crypto pie on the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_RLB_CKPNT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize RLB (range logic block) checkpoint. This is needed for checkpointing range logic block information for restore on process restart.), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-SYNC_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter detected link sync error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CHKPT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The reason should be supplied in the IOS msg itself, but basically this message means that shelfmgr usbale to update HA cheackpoint.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-FATAL_ERROR_CAPI
### Response:
(Severity: 3), (Category: INFRA), (Description: A fatal error occurred in CAPI communication. Note the reason for the error.), (Recommended Action: Root cause of the error needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-HP_CONN_LOST
### Response:
(Severity: 5), (Category: IP), (Description: The ntp server lost the connection with a high-priority clock source. The Stratum tells the change of server stratum.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-CONNECT_DETACH
### Response:
(Severity: 3), (Category: OS), (Description: SSM process tried to detach to the clients channel using ConnectDetach api and encountered a failure.), (Recommended Action: Collect system log information for the reported service and pid. Collect show process <pid> , follow process <pid>, show process blocked Collect show tech ssm. If this message is seen repeatedly, capture the output of debug event-manager all job <ssm jid>. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you monitor interface statistics in Cisco IOS XR?
### Response:
Interface statistics in Cisco IOS XR can be monitored using the 'show interfaces' command. It provides information about interface status, packet counts, error counts, and other performance metrics for each interface.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-SERVICE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver was not able to connect to the service with the above error condition.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-INVALID_IDPROM_DATA
### Response:
(Severity: 4), (Category: DRIVER), (Description: CCC driver detected invalid data in IDPROM content. This can happen only with protoype boards that did not get correctly programmed.), (Recommended Action: Content of the IDPROM will have to be fixed to avoid seeing this warning message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-CDMA_RAM_PARITY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates an uncorrectable parity error occurred on this internal SRAM. %s - name of ram that error occurred %x - key of error node recorded %s - error data), (Recommended Action: Ignore the message if appears only once. Otherwise reload the board Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-DELAY_ASYM_CHANGE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PTP is phase locked to the remote PTP server and user has changed the delay-asymmetry configuration. The change in asymmetry can cause PTP servo to temporarily unlock to apply the necessary phase adjustments.), (Recommended Action: No further action is needed. If PTP unlocks, then it shall eventually phase-lock to the remote PTP server again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_MCAST-3-ERROR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM MCAST, error), (Recommended Action: Please collect the console log, multicast traces (show mfib trace loc <>, show mfib hardware ltrace location <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV6_EA-3-CRITICAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA IP-EA, Critical error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSPI_PHY_LOSS_SYNC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RxSPI Phy lost sync.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-PVT_POOL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath encountered an initialization error A reason text will be supplied to describe the error. This error could occur for two reasons. 1. The system is low on resources. 2. A hardware error or an error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-4-WARN_ERR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an severe error message in the OFA module to indicate that an error was seen during init operation.), (Recommended Action: Please collect the console log, OFA traces (show ofa trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_TF_INTR_FIFO_1HI_OVFL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_TF_INTR_FIFO_1HI_OVFL interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-INVALID_PORT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was supplied with a plim port or uidb index that exceeds the limit of num ports.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-CARD_SEATED_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA has detected that the card is not being seated correctly in the backplane of the chassis. This problem is preventing the card from booting.), (Recommended Action: Reseat the card to correct the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-0-CRC_ERROR_FATAL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: CRC rate above acceptable level), (Recommended Action: The board would get reloaded. On reload of board, run following commands from RSP ksh to decode PCDS information - pcds_decode -c NIANTIC <.pcds file>. If users has auto reset option disabled in admin config, then the board would not get reloaded on its own. At this stage collect the output of (admin)'show tech-support control-ethernet location <nodeId> file outputFile')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-REPOQUERY_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: An error has been encountered when using repoquery. While the issue is seen, the install process cannot query all repositories (configured or internal) and so information regarding the repositories may be missing to the user. This can sometimes be seen during a system upgrade for a short period (less than a minute) with no impact to the system. If this issue is seen repeatedly over an extended period of time, then there may be an issue with the packaging manager. This will not impact routing, but should be investigated before any further install operations are performed.), (Recommended Action: If seen during a system upgrade, then this syslog can be ignored as long as the upgrade completes successfully. If the issue should be investigated: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-5-SYSCALL
### Response:
(Severity: 5), (Category: HA), (Description: A system call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-SEMFAIL
### Response:
(Severity: 3), (Category: SNMP), (Description: SNMP ncurred an internal software error. This error indicates sysnchronization lock create failed), (Recommended Action: Restart process which causes failure senario. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-CCTL_ECM_SYSDB_REG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Creating/opening ECM connection to SysDB for registering notification on this connection failed as mentioned in the mesage.It will retry to register again.This is not a major failure,system will continue to work.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-SOFT_ERROR_ALERT_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 0.), (Recommended Action: Please reload the board in the next maintenance window. Until then affected ports will be down. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-HARD_HIGH_WM_EXCEED
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Arbiter driver LWM reply error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-NSR_PEER_SYNC_LOST
### Response:
(Severity: 5), (Category: ROUTING), (Description: LDP Non-stop routing synchronization to standby RP node has been lost for the peer. This message appears only if the <Bold>mpls ldp log nsr<NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-DISK_IMAGE_PATH
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file contains an invalid disk image path for one of the disk devices. This may be a Harddisk, CDROM or USB storage device.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFC_WATCHDOG-5-EXPIRED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Priority Flow Control (PFC) packets have been continually received and the queue has been stopped for the given watchdog interval.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set RSVP policy for TE tunnel in Cisco IOS XR?
### Response:
To set an RSVP policy for a TE tunnel, use the 'tunnel mpls traffic-eng policy' command in interface configuration mode. RP/0/RSP0/CPU0:router(config-if)#tunnel mpls traffic-eng policy Policy1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-LRD_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show mpls traffic-eng tunnels' command in IOS XR?
### Response:
The 'show mpls traffic-eng tunnels' command is used to display information about MPLS TE tunnels. It shows the tunnel name, destination, state, setup and hold priorities, bandwidth, and the path used by the tunnel. This command is useful for verifying the state and attributes of TE tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-4-ERR_NETIO_CONN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Cannot connect to netio pak server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_12_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred at system initialization time.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-SHMEM_UNAVAILABLE
### Response:
(Severity: 3), (Category: L3), (Description: The IPv6 Neighbor Discovery (ND) spoofing process (ipv6nd_lite) has been asked to handle more interfaces than it is built to support. This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart. The error results from a misconfiguration.), (Recommended Action: Reduce the number of virtual interfaces configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-3-GENERAL_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Some requested operation failed. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-6-THRESHOLD_NO_CLEAR
### Response:
(Severity: 6), (Category: INFRA), (Description: The specified SLA threshold was breached, but is no longer breached. However, the bucket in which it is no longer breach is considered suspect, and therefore the threshold state, and action that was taken on breach, has not been cleared.), (Recommended Action: The threshold clear may or may not be related to the suspect bucket. Therefore, wait for the next non-suspect bucket to determine whether this is a genuine threshold clear or not.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-4-PASSWD_ALREADY_EXISTS
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error has occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-UNRECOVERABLE_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The host CPU on the line card has detected a fatal non-recoverable error on one of the network processors. The affected NP will be shut down without LC reload.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-NP_DIAG
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Self diagnostics has detected NP packet processing problem. Automatic recovery action will be attempted. Further alarm will be raised if automatic recovery attempts fail.), (Recommended Action: Recoverable error. Reboot linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_REROUTE_PENDING_CLEAR
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface is fast-reroute enabled and in UP state; earlier path verification failed but it did not take down the interface and got into reroute-pending state. Interface is now getting out of re-route pending state as a result of reoptimization or CLI changes.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status reroute' \ interface configuration).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-3-INTERNAL
### Response:
(Severity: 3), (Category: OS), (Description: The client library has failed a sysmgr function.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-FALAFEL_PON_RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: The falafel device failed due to the above mentioned error. The device is being reset (PON) to recover from failure), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP if the asic is continuously reset and recovery does not take place after device reset: 1. 'show processes sfe_driver location <loc>' 2. Collect all traces: 'show controller sfe trace all location <loc>' 3. dmesg and /var/log/messages from host and sysadmin VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-3-ERROR_INTERNAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was detected in the Platform SPAN module which causes the span module to exit. The reasons might be *Failed to initialize the shared memory AVL tree *Failed to get local source port *Failed to delete AVL entry tree *Failed to initialize debug and ltrace events), (Recommended Action: No action is required. Process will try to restart automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-SHM_DEVICE_MEM_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to allocate memory using shared memory handle of the HDI device client. %s-Function name. %s-Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_VRFNSUSP
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_ENCAP_DB-2-TUN_NOTFOUND_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: tunnel entry not found in avl tree), (Recommended Action: The following needs to be collected and DE team to be contacted. show encap-id platform egress-db all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-MSG_SIZE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBQSMGR-1-SEND_READY_FAILED
### Response:
(Severity: 1), (Category: INSTALL), (Description: The communications channel to QSU Manager is unavailable.), (Recommended Action: The process is automatically restarted, which should trigger a QSU abort - the QSU may be attempted again at this point. If this process is involved in protocol operation, then there may have been packet loss as a result of this event which requires remedial action. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-2-PCI_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The switch encountered a PCI error during a DMA transaction. Process will restart by itself to recover from the failure. After the bcm_process restarts, the error will be cleared.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROMMON_BURNER-3-BAD_ARG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Bad coammand option.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-SYSDB_ITEM_GET_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-RSA_PUBLIC_KEY_NOT_FOUND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to query RSA key.), (Recommended Action: 'Check the subject name in the certificate.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-3-ERR_PKT_DROPPED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Could not send pkt to QAD and it is dropped. %d- reason for the pkt drop. %s- error type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-ERR_SYSDB_CONNECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospf_uv process was unable to bind to SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-ERR_THREAD_DEADLOCK
### Response:
(Severity: 2), (Category: ROUTING), (Description: BGP detected a lock being held when all locks should have been released.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_MPLS_EA-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: DNX MPLS-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-5-YVE_DEBUG_ERROR
### Response:
(Severity: 5), (Category: MGBL), (Description: An error was encountered while the Central Configuration Validator (CCV) was processing a request from the command line for YVE debug.), (Recommended Action: The problem may be caused by failure to find the requested rule or node in the YVE database. In this case, check that the parameters are valid.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-HIGH_TEMP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high temperature. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUBS_AIPC_UTIL-4-TRACE_INIT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is a non-fatal error in initializing tracing buffer and can happen when the router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: Check the memory state of the ltrace process and overall system. Reduce the activities on the system if required for tracing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TURBOBOOT-3-DISK_TOO_SMALL
### Response:
(Severity: 3), (Category: INSTALL), (Description: Disk is too small for easybake to continue on.), (Recommended Action: Based on the error message check the required number of bytes for IOS XR software and replace the disk with one that has equal or more number of bytes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-IIR_QUERY
### Response:
(Severity: 4), (Category: OS), (Description: Hardware pre-ifib returned an error during a batching operation.), (Recommended Action: Restarting pifibm_server_lc may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-MEM_CORRUPT_TX_REQUEST_ARRAY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received UART message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ bias less than or equal to the low laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-3-SVC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A service API failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-5-ROLE_ACTIVE
### Response:
(Severity: 5), (Category: INFRA), (Description: The SERG role from the concerned group has change to ACTIVE from either MASTER or SLAVE or uninitialized role. This is a normal redundancy event.), (Recommended Action: None required if there has been any network event or administrative action that caused this redundancy role change. Session status may be checked on both active routers to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-3-SIA_UPGRADE_BLOCKED
### Response:
(Severity: 3), (Category: LICENSE), (Description: Software upgrade is blocked. Please check show license platform summary/detail for more information.), (Recommended Action: Rectify the SIA Out of Compliance as soon as possible.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-REMOVING_SHM
### Response:
(Severity: 7), (Category: HA), (Description: While initialising Checkpoint. Process is removing shared memory segments .), (Recommended Action: Debug message only. No action required. This message is to report state of process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-IO_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Egressq ASIC encountered a read or write access error or its Host Processor Interface block has gone down and come back up. The access error is classified into two classes - software or hardware. Hardware access error refers to an error at the PCI link used to connect the ASIC to the host processor. Software access error refers to the error, caused by a un-discovered software bug, which makes software to perform un-supported access to an ASIC location, like writing to a read-only location.), (Recommended Action: If the message indicated this is a hardware access error, software will have automatically taken action to recover from the error. If harware access error does not recur, no other action is required. If the hardware access error persists or it is a software access error, copy the System Message exactly as it appears on the console or in the system log, enter command 'show tech-support controller egressq location <>', report the error to your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_22
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_SYSMGR_MON_LIB-3-SYSMGR_MONITOR_TMP_CORECOUNT_OPEN_FAILED
### Response:
(Severity: 3), (Category: HA), (Description: vm-monitor sysmgr tmp coredump count file open failed), (Recommended Action: This indicates an vm-monitor process is hung or unable to communicate with sysmgr.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-6-LOG_INFO
### Response:
(Severity: 6), (Category: OS), (Description: An Info message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE1_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE1_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-PORT_FWD_ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH port forwarding encounterd some error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN extranet feature?
### Response:
The MPLS VPN extranet feature allows MPLS VPN service providers to distribute routes across VPN boundaries. It enables a VPN to share common routes with other VPNs, providing controlled access between VPNs. Extranet VPNs are implemented by configuring route targets to be imported and exported between VPNs that need to share routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the 'install replace' command in Cisco IOS XR?
### Response:
The 'install replace' command in Cisco IOS XR replaces the current software with a new version, effectively performing an upgrade or downgrade of the system software.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-3-BAG_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Bag api call failed.), (Recommended Action: Please collect the output of the following commands: - show tech-support lpts - show tech-support sysdb - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP Routing Policy Language (RPL) on IOS-XR?
### Response:
The Routing Policy Language on IOS-XR is used to define routing policies to filter and modify BGP path attributes. It provides a rich and flexible policy definition language. RPL policies are defined separately from the BGP process and applied using the route-policy command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-ERR_DLL_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabricq driver tried to register for a dll but it encountered an error. The driver might lose some of its functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GRID-4-BANK_FULL
### Response:
(Severity: 4), (Category: L2), (Description: All the network resources associated with this BANK have been completely exhausted and GRID is unable to allocate more rids), (Recommended Action: The network operator could try and reduce the scale which would free up the rids . For eg. 1. If the GLIF bank 0 is full, reduce the ARP entries / adjacencies 2. If the GLIF bank 1 is full, reduce the labels)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-STATE_CHANGE
### Response:
(Severity: 3), (Category: MGBL), (Description: The node on which the process is running has changed state, but the process was not able to change the mode in which it is running to reflect this. The most likely reason for a state change of this type is an RP failover.), (Recommended Action: This message will be displayed immediately before the failing process restarts. The restart may clear the issue. If it does not, then the following action should be taken. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-QSM_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The server failed in advertising its namespace through QSM), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_STORE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS was unable to perform the specified operation on the specified interface. This is most likely to be a resource starvation problem, but may be an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-UNKNOWN_RP_BOARD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the board type cannot be recognized, therefore, the node will not be able to boot up. This may be caused by an invalid eeprom content; or happens in a rare corner case which may recover after a board reset.), (Recommended Action: Two possibilities to this message. 1) The board boots up after resets beacuse of boot request timer timeout : *None* 2) The board does not boot up after resets : Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM_COMMON-4-WRITE_ABORT
### Response:
(Severity: 4), (Category: MEDIA), (Description: A Write to nvram was aborted.), (Recommended Action: Recovery will be attempted in the driver. Otherwise format nvram using command - erase nvram: format)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVDPMEM-3-INVALID_PARAMS
### Response:
(Severity: 3), (Category: OS), (Description: Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-2-ERR_HEX
### Response:
(Severity: 2), (Category: L2), (Description: Error in gatm operation. Error message here describes that the gatm method was expected to succeed, but failed somehow as either the attribute fetch/ operation corresponding to the interface handle(in parenthesis) did not succeed Or, the ifhandle itself was invalid.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_4_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-TEST_SKIPPED
### Response:
(Severity: 6), (Category: DIAG), (Description: The specified diagnostic test cannot be run.), (Recommended Action: Nothing. Although the test cannot be run, this message does not indicate a problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_LIB-3-ERR_SHM
### Response:
(Severity: 3), (Category: L2), (Description: Some error occurred in operations related to Shared Memory area such as Shared Memory lock/unlock, Shared Memory corruption, memory allocation or freeing Shared Memory. This could have occured due to overuse of memory. This can result in- 1) Not programming hardware for proper forwarding. 2) Not creating new bridge.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-3-ERR_DCMD_PSARB_DRP_HACK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Please refer the error string for more detail. Software will automatically do recovery by restarting the reddrv process.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_ABORTTRANS
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_EVENT_CONN_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for disconnection or connection error event. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-MSGQ_CREATE_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Creation of above message queue failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-4-TCP_KEEPALIVE
### Response:
(Severity: 4), (Category: IP), (Description: The TCP keepalive timeout was not set during initialisation. The default value of 2 hours will apply. Telnet will otherwise function normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The router can continue to be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_EA-3-PLATFORM_UPDATE
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while trying to update the platform code with information about the interface whose handle is contained in the message.), (Recommended Action: The update will be replayed to the platform code and may succeed on a subsequent attempt. If not then the system will be left in an inconsistant state and this interface may not function normally. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_8_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-CHKPT_REMARK_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Un-able to remark valid FGID's during MDR), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-6-SERVER_BUSY
### Response:
(Severity: 6), (Category: MGBL), (Description: A lock operation on shared resource, called by nvgen failed due to the mentioned error.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-SPKR_RUNNING
### Response:
(Severity: 4), (Category: ROUTING), (Description: The bpm process was terminated improperly and the speaker process did not receive the notification to terminate. A new bpm process has started with a different AS number due to a new bgp configuration while the speaker process is still running with the previous AS number.), (Recommended Action: The speaker will be restarted to handle this error. No further corrective action is necessary. However, please contact your Cisco technical support representative to report this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-RSP_ISOLATED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the RSP is in an isolated state from the rest of the router. This means it is held in isolation for the collection of debug information and will be subsequently rebooted by software automatically.), (Recommended Action: None is required, this message is informational.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_API-3-TLVLIB_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager TLVLIB init operation has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_UNEXPECTED_CLEANUP
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA is trying to cleanup a session when it is in an unexpected state. The error message describes which state it was in, and what was triggering the cleanup. This is most likely to be a programming error, either in PPPoE or in one of the processes it interacts with.), (Recommended Action: PPPoE MA should recover by itself.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SUSTAINED_CRC_ERR
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabric interface ASIC is reporting a sustained rate of CRC errors.), (Recommended Action: Check for other failures like online diags. Reload the board to see if the error goes away. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-5-MICROSEGMENT_OUMERGE_MODE_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The default mode of operation on this platform is NOT to do merge of uSIDs from overlay and underlay into a single uSID carrier. This mode can be changed to 'merge' by configuring <Bold>segment-routing srv6 micro-segment merge-overlay-underlay-sids<NoBold> command. However, the configuration change applies only to any new SRv6 overlay getting programmed onward in RIB/FIB.), (Recommended Action: To trigger re-programming of existing SRv6 overlay prefixes in RIB/FIB after any change to this config, please flap those routes by <Bold>clear route [vrf <>] { ipv4 | ipv6 } unicast<NoBold>. If this config is applied at the time when no SRv6 overlay prefixes are programmed in RIB/FIB, no action needs to be taken at the config change.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
action-3-PEG1MSG
### Response:
(Severity: 3), (Category: OS), (Description: This is a test message for action->peg message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-BOOT_REQ_RECEIVED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Logging the Boot Request Rommon Version), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-ERROR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message indicates error in PLATFORM FIB HAL), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show logging, show version, show platform, show install active, show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOS_PORTS
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_ILKN_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX encountered Rx interlaken core error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-4-COND_TIMED_WAIT
### Response:
(Severity: 4), (Category: OS), (Description: In RDS library we tried to wait using the pthread_cond_timedwait but the pthread_cond_timedwait failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-INTF_FWS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospf_uv process was unable to initialize the forward-reference store library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_BURNER-3-FILE_OP_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error occured with file operations.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-REG_MISMATCH
### Response:
(Severity: 7), (Category: HA), (Description: An application is trying to register for its table. A table with the same name and version exists, but other attributes have changed, so the table is not allowed to be used.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_NSR-3-SPR_NSR_MEM_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: sprayer + NSR headers memory allocation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-EVENT_REGISTRATION_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed while attempting to connect to an event manager channel for the indicated subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SEND
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB server failed to send an asynchronous message to a SysDB client. A likely reason for this is that the process in question has exited.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show process <jid> location all<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show process <jid> location all<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LS_LFI_DISABLED_TYPE_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a lfi disabled type error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-ERR_SET_REBOOT_CAUSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The failure on setting reboot cause to syspage before performing Kernel Dump.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-lsp_verify_lsp_absent
### Response:
(Severity: 3), (Category: OS), (Description: Unable to update LSP due to absense of LSP), (Recommended Action: Check LSP name specified in EXEC CLI)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-AMBIGUOUS_MAC_SYNC_ROUTE
### Response:
(Severity: 3), (Category: L2), (Description: If a sync route is received with no attachment circuit ID extcomnm, bridge port stamping is done on a best-effort basis. If exactly one bridge port is found matching this EVI and ESI, it will be used to program forwarding. Otherwise, the sync route is considered to be ambiguous and is dropped.), (Recommended Action: Review evpn and l2vpn configuration to determine where additional forwarders (bridge ports) have been configured for the same interface ethernet segment and same EVI, and remove them or configure the EVI with AC aware VLAN bundling. If a AC aware vlan bundling is used, ensure that the configuration is matching on the peer router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-6-INFO_STATECHANGE
### Response:
(Severity: 6), (Category: IP), (Description: The HSRP router has changed state for the specified group and interface.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is a PIE in the context of IOS XR?
### Response:
In the context of IOS XR, a PIE (Package Installation Envelope) is a modular combination of components that identifies a set of features a user wants to run on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the OSPF Hello protocol?
### Response:
The OSPF Hello protocol is responsible for establishing and maintaining neighbor relationships. Routers send Hello packets out each OSPF-enabled interface to discover neighbors. The Hello packet contains information about the router's OSPF priority, router dead interval, designated router, and backup designated router. Routers become neighbors if certain information in their Hello packets match.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR node protection desired feature?
### Response:
The MPLS TE FRR node protection desired feature allows link protection to be used even when node protection is configured on a tunnel. It provides a way to prefer node protection but use link protection as a fallback. The tunnel is protected if possible, but a best-effort approach is used otherwise.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_FM-6-FIELD_IGNORED
### Response:
(Severity: 6), (Category: L2), (Description: User is trying to use a classification criterion not supported by the feature. For example, user is trying to apply a with a class matching matched on an IPv6 ACL that contains a match on flow-label. The entire rule (e.g. ACE) containing the unsupported criterion is ignored. In our example, only the ACEs containing match on flow label are ignored. All other ACEs are still downloaded to CPP.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_SYSDB_EDM_REG
### Response:
(Severity: 3), (Category: L2), (Description: The bfd_agent was unable to become an external data manager (EDM) for the specified path. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective MSC reboot.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BLWM-4-REPLY_PROCESSING_ERRORS
### Response:
(Severity: 4), (Category: OS), (Description: A failure occurred while processing the batched replies received from the server. This is most likely an internal error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_6_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-NBR_LOST
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'Lost connectivity to the neighboring device & ' 'it is no longer part of autonomic domain'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-EPCFRR_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing TI LFA. The error is unexpected & nonfatal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-DEBUG_SPECIFIC_SET
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA_CAPI_SERVER-3-IOFPGA_ERR
### Response:
(Severity: 3), (Category: INFRA), (Description: IOFPGA has asserted a Error wrt power sequencer, for exact info view the '%s' msg displayed.), (Recommended Action: This is an informational message.This indicates fault with power sequencer as displayed in syslog message. Can be ignored on first occurence of msg. In case of repeated msg contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-INVALID_IP
### Response:
(Severity: 3), (Category: SERVICES), (Description: The ip address is invalid.), (Recommended Action: This is a serious error and the function returns from there.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-SPAN_BUFFER_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error was encountered while writing to the buffer.), (Recommended Action: This problem may indicate there was an issue with writing to internal buffer. You can reconfigure SPAN and try again. If problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-3-MUTEX_DISALLOWED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An attempt was made to lock the packet mutex from a thread where mutex locking is disallowed), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFD_HELPER-6-STATE
### Response:
(Severity: 6), (Category: MGBL), (Description: An change state occurred in the confd_helper.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-X86_XFORM_BEFORE
### Response:
(Severity: 7), (Category: HA), (Description: To print the values before conversion.), (Recommended Action: X)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-7-GENERIC_TILE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A generic error occurred in Tile Manager. Cause of the error will be mentioned in the message displayed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-6-API_RET_VAL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is informational message to indicate return value of api.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-PARAMETER
### Response:
(Severity: 7), (Category: INSTALL), (Description: A client of a Version Manager library passed it an invalid argument, and so the library may not be able to carry out its operations. Installations may not produce all the expected results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH_UPGRADE-7-CANT_ACTIVATE_ON_NODE_TYPES
### Response:
(Severity: 7), (Category: INSTALL), (Description: Instructions in package conflict with requested operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_PLIM_SB-3-FPD_IMG_UPD_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The FPD image update operation for the indicated device has failed. The cause of the error is also indicated in the message.), (Recommended Action: Retry the image update operation and if it fails again, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BLWM-4-TIMED_FLUSH_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: A BLWM-enabled client failed to flush the batched LWM requests. This is most likely because the server process restarted. Wait for client to reestablish connection with server and flush the batched requests again.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_MGR-6-CERRNO_FAILED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The SVI Adjacency Manager encountered an error while registering its error messages. Some error messages may be displayed numerically rather than with full messages. No other problems will be caused by this failure.), (Recommended Action: No action need be taken.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RD_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to initialize a route distinguisher node inside BGP Table database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-5-PEC_INSERTED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The inserted expansion card with serial number.), (Recommended Action: None, informational purpose only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-3-RDM_SHADOW_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: For the region, resource data manager shadow memory operation failed due to the reason indicated. The operation parameters are as shown.), (Recommended Action: If the operation is shadow 'allocation', run show rdm server summary location <> to see whether the number of free shadow pages left is enough to meet the needed. If there are not enough free pages left, see whether the router has reached its scale limt.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-1-ERR_HW_SBE_THRESHOLD_RMA_PLIM
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error is detected on the PLIM, and the error threshold has been crossed. Software will take action as described in the error message, if not none, to try to contain or recover from the error. The hardware error and the software recovery action will not impact traffic. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Threshold of %s - the defined threshold for this error. Count: %d - SBE error count Software action: %s - the action that software will take to try to contain or recover from the error. Recommended user action: %s - recommended action to the user. Possible values: 'none' 'replace CFP' 'PLEASE MANUAULLY RELOAD THE LC AT NEXT MAINTENANCE WINDOW'), (Recommended Action: Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-OPTICS_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The G.709 feature is configured without the necessary license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different levels of the MPLS VPN CSC feature?
### Response:
The different levels of the MPLS VPN CSC feature are\n- CSC-1: Customer carrier uses IP to transport MPLS VPN services\n- CSC-2: Customer carrier uses MPLS to transport MPLS VPN services, but does not use labels (IP+BGP)\n- CSC-3: Customer carrier uses MPLS to transport MPLS VPN services, and uses labels (MPLS+LDP)\n- CSC-4: Customer carrier uses MPLS to transport MPLS VPN services, and uses labels with BGP label distribution (MPLS+BGP labels)\n- CSC-5: Customer carrier uses MPLS VPN to transport MPLS VPN services (MPLS VPN+LDP+BGP labels)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LNS_EA-4-ERR_EVC_ERROR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: After detecting an error with the IMP connection, LNS EA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-NOT_VSA
### Response:
(Severity: 3), (Category: SECURITY), (Description: Encountered a non VSA attribute.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-BAD_HEAPIDX
### Response:
(Severity: 7), (Category: HA), (Description: Internally heap pointers are kept as offset indices. A given heap index was found to be outside the heap.), (Recommended Action: Collect the 'show cdm trace jid all' output logs and contact TAC, if error persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-CHKPT_MEM_RESTORE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shelfmgr API call to update the HB Monitor database failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-READ
### Response:
(Severity: 3), (Category: MGBL), (Description: The process has illegally read configuration files before configuration manager has applied configuration. This configuration read by this process might be inaccurate after configuration manager completes applying the configuration.), (Recommended Action: Provide traceback details for further analysis. The process emitting this error message may need to be restarted after the node has completely rebooted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZENJF-4-BACKUP_ZENJF_PROM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The system is booted from backup Zen-JF FPGA prom.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
action-3-BISTATE_MSG
### Response:
(Severity: 3), (Category: OS), (Description: This is a test message for action->bistate message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel mesh affinity feature?
### Response:
The MPLS TE auto-tunnel mesh affinity feature allows auto-tunnel mesh tunnels to select or avoid links for the mesh paths based on configured affinity attributes. This provides more control over the mesh path selection compared to the default behavior of using the TE metric. Affinities allow mesh paths to be optimized for specific requirements.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDSUTILS-7-INTERNAL_ERROR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_EDM-3-SYSDB_BAG_ENCODE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-REFBW_CHG
### Response:
(Severity: 6), (Category: ROUTING), (Description: Informational message reminding the user that reference bandwidth should be consistent across all routers in the area.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-GRUB_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: GRUB running on the indicated card is reporting a warning condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_EVENT_PROCESS
### Response:
(Severity: 3), (Category: OS), (Description: APS EVENT PROCESS. It is applicable for Debugging of APS SM EVENTs for APS.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-DEACTIVATE_ABORTED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package deactivate requested on this satellite has been aborted, as requested by the user. Run 'show nv satellite status' for more information about the current state of the satellite.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CPT_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PHY controller driver detected a parity error.), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-LOCKING
### Response:
(Severity: 7), (Category: SYSDB), (Description: The server has either failed to aquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is just an info message in PLATFORM FIB HAL), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-EDM_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize EDM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-INDUCED_GSP_DOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that shelfmgr was induced to send out a gsp node-down notification for the given node by the user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-7-ERR_SYSDB_EDM_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver was unable to become an external data manager (EDM) despite having a connection to SysDB. The operation will be retried. The Fabric driver and the System should continue to function as normal, with the exception that the 'show' commands for Fabric driver will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-4-CRITERIA_CONFLICT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that sc-reddrv has a tie in defining the redundancy role.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-2-CDR_I2C_ADDR_CHK_FAIL
### Response:
(Severity: 2), (Category: FABRIC), (Description: Hardware initialization of Egress CDR failed. It may recover automatically after card reload), (Recommended Action: RMA the card if problems persists and doesn't recover after the reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BQS_LIB-6-BATCHOP_NOT_POSSIBLE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Rearrangement of root rows using batch operations will not be done since the number of entries to be rearranged crosses the maximum supported using batch op. Rearrangement will be done using the normal CSR writes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-ROLE_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Detected role change signal.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-DEV_SFP_PID_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A PID not supported error was detected during SFP initialization. A PID not support error is reported when either the PID can not be read or not supported on the platform. The SFP is the pluggable optics on the line cards. SFP initialization may happen when linecard boots up, SFP OIR and line card process restart. The optics will not be enabled if a PID not supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the SFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_15_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-5-ADJ_DONE
### Response:
(Severity: 5), (Category: IP), (Description: The connection to the identified neighbor no longer exists. Unless this outage was intentionally performed by a user, there are a number of possibilities which can cause the neighbor to stop responding or remove the connection: 1) network outage, 2) ANCP was disabled at the remote side, 3) ANCP process failure at the remote.), (Recommended Action: Test the connectivity by pinging the remote ip address. If this fails, determine what is causing the network outage. If it is successful, check the state, and configuration of ANCP client at the remote site. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONCERTO-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CONCERTO encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGII_API-3-INFRA_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: An error occurred while processing an infrastructure service request. This should happen mostly due to resource exhaustion.), (Recommended Action: Do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key platforms that currently run Cisco IOS XR?
### Response:
The main platforms running IOS XR are the Cisco CRS-1 and CRS-3 carrier routing systems, Cisco 12000 series routers, and Cisco ASR 9000 series aggregation services routers. IOS XR is designed for distributed, carrier-class routing platforms.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-INVMGR_MISS_SLICE_INFO
### Response:
(Severity: 3), (Category: L2), (Description: The NPU driver received slice_oper_up but not yet received slice_info), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1_LNM-3-EVENT_STATS
### Response:
(Severity: 3), (Category: L2), (Description: This log prints lnm summary statistics for a given bay when a function is called by client test code.), (Recommended Action: Copy the error message exactly as it appears and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of stub areas in OSPF?
### Response:
A stub area is an OSPF area that does not accept external routes (Type 5 LSAs). Instead, the Area Border Router (ABR) generates a default route into the stub area for all external destinations. This reduces the size of the routing and topology tables within the stub area, as all external routes are replaced by a single default route. Stub areas are useful in reducing memory and processing requirements on routers in the stub area.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-5-PM_LIVENESS_STATE_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: PM Liveness-detection has detected a state change.), (Recommended Action: None. This is a solicited message when performance measurement liveness detection notices a state change on Endpoint, SR Policies and logging state-change configuration in the corresponding liveness profile is enabled. It is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error indicates that the entered command format is not proper.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>), show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETFLOW-7-ERR
### Response:
(Severity: 7), (Category: MGBL), (Description: This is an error message in the Netflow manager to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate a resource needed by the application. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: These error message is does not impact the functionality of NetFlow. Therefore no action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC-1-L1
### Response:
(Severity: 1), (Category: SERVICES), (Description: Log level in sbc app is set to higher than nbb_console_unconditional_log_level. Use errmsg facilty to print error message), (Recommended Action: collect ips and pd trace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-3-ASSERT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Some essential condition to move on in the system has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-6-ENFORCE_EVAL
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled for evaluation.), (Recommended Action: The customer may consider to register for licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-CORE_DUMP_OFF
### Response:
(Severity: 6), (Category: OS), (Description: The core for the process has turned off delibrately), (Recommended Action: This is an informational message.Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_EVC_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: After detecting an error with the connection to the specified service, SSRP failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq Sysdb Registration verification error. The driver should retry by itself), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIP-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-LDP_IGP_SYNC_CHKPT_LIMIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: LDP checkpointing has a limit for maximum number of neighbors per interface due to LDP IGP Sync feature requirements. It is not recommended to cross the limit provided by Engineering. If crossed, undesired affects can be seen and LDP IGP Sync feature may not work. This only applies to shared media interfaces.), (Recommended Action: Limit number of neighbors to the value as provided in Engineering guidelines)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_SYSDB_INTEGRITY
### Response:
(Severity: 4), (Category: SECURITY), (Description: Found digest mistmatch for SAM's SysDB name space, the SAM portion of SysDB had been deleted. If SAM backup files exists, this should not impact SAM's functionality; otherwise, CA root certificate and CRL will be lost), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSHELL-3-PTHREAD_MUTEX_LOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: A lock operation for synchronising shared resource, failed due to the mentioned error.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-VERSION
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-PLUGIN_INIT_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: The Linux Packet Classifier hit a fatal error whilst initialising the Packet Classification plugin. The SPP process will be restarted in an attempt to recover (a traffic impacting operation).), (Recommended Action: If the message is not seen again then the restart resolved the problem and no further action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-RDDR_FIFO0_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: RxDDR 1875 to 200 FIFO 0 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-1-SIGPATCH
### Response:
(Severity: 1), (Category: OS), (Description: The Event Manager signal handler should never be invoked directly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-BAD_SORT_TYPE
### Response:
(Severity: 7), (Category: INSTALL), (Description: An internal datastructure could not be sorted, so the resultant list will be unsorted. This will only have a cosmetic effect.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-PERF_INFO
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Syslog info in np_perf.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-7-ERR_RES_PROG
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq encountered an error during resource programming. If there are no further attempts to reprogram the device, the device behavior may be inconsistent.), (Recommended Action: The driver/client processes try to recover from this error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMS-6-EMSD_SERVICE_START
### Response:
(Severity: 6), (Category: MGBL), (Description: emsd service start), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-6-START
### Response:
(Severity: 6), (Category: L2), (Description: This is informational message indicating that the ASIC SCAN is started from CLI.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IP_EA-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails due to failure during forwarding feature programming. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Designated Intermediate System (DIS) in IS-IS?
### Response:
The Designated Intermediate System (DIS) is responsible for generating Link State PDUs (LSPs) on behalf of the pseudo-node representing the broadcast network. It is elected based on priority and MAC address. The DIS helps reduce the amount of flooding on a broadcast network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFINDEX_PROVIDER-3-INTERFACE_INDEX_PERSISTENCE_PARTIAL_RESTORE
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to restore all interface indices from the interface index persistence file has failed.), (Recommended Action: Remove and re-generate the interface index persistence file by disabling and enabling persistence in the configuration. Network management applications should rediscover interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-6-IPACCESSLOGS
### Response:
(Severity: 6), (Category: ACL), (Description: A packet matching the log criteria for the given access list was detected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_PRINT_CURRENT_TIME
### Response:
(Severity: 7), (Category: MGBL), (Description: Printing value of current time.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set up a user group in Cisco IOS XR?
### Response:
To set up a user group, which defines access privileges, use the 'group' command in global configuration mode. RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)#group group1
RP/0/RSP0/CPU0:router(config-GRP)#username user1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PLATFORM_GET_HW_BOARD_TYPE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Equating the Small Pool size to the SPP context size plus rewrite space (which totally equates to 1080) for Satori cards only as the small pool is used as a fallback pool for SPP. Here it unable to identify the board type, hence unable to define the SMALL_POOL size as per SPP requiremnets.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-TERMINATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Error ocured while disabling mcast), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_3_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-FATAL_INT_CASE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Unable to handle the interrupt. Too many errors.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MLACP_SYSTEM_ID_ARBITRATION
### Response:
(Severity: 6), (Category: L2), (Description: Each mLACP peer specifies a system id for the ICCP group. If the system id's are different, arbitration must occur. However, if the peer that has supplied the values selected through arbitration disconnects, there will be a flap in the bundle state.), (Recommended Action: If the alarm is set, the user should ensure that all peers have the same system id for the ICCP Group.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLDP-7-INIT_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: A fatal error occurred during initialization of MLDP subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-VPNV4_OUT_OF_SEQ_FREE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform independent FIB is freeing a VPNv4 leaf before any of the VPNv4 gtrie completes its re-initialization after restarting process fib_mgr. It is an internal software error. It is caused either by a sequencing error in platform indepedent FIB software or by VPNv4 gtrie re-initialization failure in platform depedent software which is reported via another error log before this log is seen.), (Recommended Action: Please collect the following info: <CmdBold>show platform<NoCmdBold> <CmdBold>show version<NoCmdBold> <CmdBold>admin show install active<NoCmdBold> <CmdBold>show logging<NoCmdBold> <CmdBold>show process fib_mgr location <node><NoCmdBold> <CmdBold>show tech cef<NoCmdBold> <CmdBold>dumpcore running process fib_mgr location <node><NoCmdBold> The 'node' is the location where this IOS message was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-6-IMP_ERROR_CLEARED
### Response:
(Severity: 6), (Category: SERVICES), (Description: This message should only be seen after a corresponding IMP_ERROR message has been seen. It indicates that any problems with diversions should now have been resolved.), (Recommended Action: No further action should be necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-4-SESSION_UNSECURED
### Response:
(Severity: 4), (Category: L2), (Description: The MKA Session identified by the RxSCI, and CKN given was unable to be secured before being terminated. Possible reasons include no MACsec support on the specified interface, invalid MACsec configuration for the specified interface, the peer identified by the given RxSCI not having enough MACsec Capability, or other internal failure prior to the establishment of Rx/Tx Secure Channels and installation of Rx/Tx Secure Associations in MACsec.), (Recommended Action: If the MKA Session should have been secured, check for other MKA system logs that indicate the reason for not being secured. Check MACsec support on the interface & peer, MACsec configuration, and connectivity. `sh macsec mka trace errors ` and `sh macsec mka trace events` may help to diagnose the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-CPSS_OS_SERVICE_BIND_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: An attempt to bind to Marvell CPSS OS services failed. This is a fatal fault since ESD would not be able to proceed with chip initialization. ESD process will restart after this fatal error.), (Recommended Action: If this problem does not recur, no intervention is required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-2-NODE_REBOOT_RECEIVED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Remote node notified shelfmgr about its software reboot with the reboot reason and cause code.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_HEARTBEAT_FAILURE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected interruption in the periodic 'Hello' messages.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-DEV_SFP_COMPLIANCE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A compliance error was detected during SFP initialization. A compliance error is due to unsupported optics, checksum error, EEPROM CRC error, vendor data error, or decryption error. The SFP is the pluggable optics on the line cards. SFP initialization may happen when linecard boots up, SFP OIR and line card process restart. The optics will not be enabled if an SFP compliance error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the SFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-TX_CH_LO_BIAS_CURRENT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects a low bias current on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption in the downstream.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_1_XAUI_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-1 from XAUI on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_UNBIND
### Response:
(Severity: 7), (Category: INSTALL), (Description: The connection to the system database failed to shut down. This will not have any adverse effect on the running of the box.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-3-DEBUG_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates, the supplied ltrace pathname is not a valid one. This error should not impact any major functionality. The message will indicate the cause of the error.), (Recommended Action: Please provide the logs of the following commands: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. 'show cgv6 services trace info' 'show cgv6 services trace error')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-0-ECC_ERROR_FATAL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Unrecoverable ECC), (Recommended Action: The board would get reloaded. On reload of board, run following commands from RSP ksh to decode PCDS information - pcds_decode -c NIANTIC <.pcds file>. If users has auto reset option disabled in admin config, then the board would not get reloaded on its own. At this stage collect the output of (admin)'show tech-support control-ethernet location <nodeId> file outputFile')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-3-ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in BPE Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: Please attempt to correct the error by restarting the process by issuing the command in exec mode -process restart bpe If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-LIB_REV_NUM_WRAP
### Response:
(Severity: 4), (Category: ROUTING), (Description: The Label Information Base revision number used to manage advertisement of labels to LDP peers overflowed. This will result in faulty label distribution to LDP peers. The system recovers by toggling dynamic label switching off and on, which forces the revision number to be re-initialized.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TABLE_DUPE
### Response:
(Severity: 3), (Category: OS), (Description: Query returned multiple objects.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-5-ROLE_MASTER
### Response:
(Severity: 5), (Category: INFRA), (Description: The SERG role from the concerned group has change to MASTER from either SLAVE or uninitialized role. This is a normal redundancy event.), (Recommended Action: None required if there has been any network event or administrative action that caused this redundancy role change. Session status may be checked on the master and slave routers to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-PRF_CFG_IGNORED
### Response:
(Severity: 4), (Category: L2), (Description: PTP has not applied an item of profile configuration on this interface because the interface does not support it.), (Recommended Action: Modify the profile configuration such that it contains only supported config. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-REMOVE_VIRT_INST_ENTRY
### Response:
(Severity: 3), (Category: OS), (Description: Removing the named virtual service from the virtual service DB tracked by Virt-manager failed.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-7-SYSCALL
### Response:
(Severity: 7), (Category: OS), (Description: A system call failed. The calling function, the failed call, and error are displayed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_SSL-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: SSL general warning message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-MESSAGE_NOT_PROCESSED
### Response:
(Severity: 4), (Category: SECURITY), (Description: Trying to initiate a tunnel while ike is disabled. The request message for establishing the tunnel is not processed and dropped.), (Recommended Action: 'Enable ike by configuring crypto isakmp command')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-CONFIG_DEL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A speaker or the bRIB failed to process the removal of some configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RFMIB-3-VERIFICATION_FAILED
### Response:
(Severity: 3), (Category: SNMP), (Description: While registering a verifier for sysdb MIB configurations of the RFMIB, failure occured. If not corrected, RFMIB might provide partial data upon query.), (Recommended Action: Restart mibd_entity process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LINK_DELETE_FAILURE_PATH
### Response:
(Severity: 3), (Category: OS), (Description: An entry could not be deleted from the links database. The full error message should indicate where the failure occured and why.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the BGP AS path attribute?
### Response:
The AS path is a well-known mandatory attribute that contains a list of the autonomous system numbers that the route has traversed. Routes with a shorter AS path are preferred.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-GWARRAY_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an error while initializing the local label database of the BGP process at the time of process startup. This can cause the per-CE label for some nets to change at the time of a BGP process restart or after a failover without NSR.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-3-TRANSPORT_STATS_LTRACE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicated DSC fails to initialize the ltrace of Statistics for transport media. ltrace will help basically for debugging purpose. DSC will retry to initialize the ltrace multiple times before it quits), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-5-L2_OVHD_MOD
### Response:
(Severity: 5), (Category: QOS), (Description: Modification of L2 overhead value will not take effect for existing subscribers with QoS policies. For the new value to take effect, remove and reapply the QoS policy.), (Recommended Action: Remove and reapply the QoS policy.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the inheritance hierarchy in IOS XR BGP configuration?
### Response:
The inheritance hierarchy from most general to most specific is: session-group, neighbor-group, neighbor, af-group, neighbor address-family. Configuration at a more specific level overrides the inherited configuration from a more general level.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-4-HW_MAC_INCONSIST_CFG
### Response:
(Severity: 4), (Category: PLATFORM), (Description: VPLS HW MAC is enabled but Metro resource is configured in BD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-TRANS
### Response:
(Severity: 7), (Category: SYSDB), (Description: A client attempted to use an unsupported distributed transaction.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-ERR_CE_SWITCH_DBG_SCRIPT
### Response:
(Severity: 3), (Category: DIAG), (Description: The execution of the daignostic reset debug log collection script has failed, and the error code is indicated in the error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-EXITING
### Response:
(Severity: 4), (Category: INFRA), (Description: The process failed to process incoming events, and will exit. It should be restarted by System Manager and resynchronize its internal state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-OPERATION_FAILURE_WITH_ERR_STR
### Response:
(Severity: 3), (Category: INFRA), (Description: Specified install operation in the error message failed. This will display the error string), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_METRO-4-HW_INIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to initialize the Platform LC Hardware in L2FIB component.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-6-FILE_OPEN
### Response:
(Severity: 6), (Category: ROUTING), (Description: The MRIB failed while trying to access a file), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-7-INIT
### Response:
(Severity: 7), (Category: ACL), (Description: The ACL manager process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the ACL manager process. This failure will occur only on RP.), (Recommended Action: Please get the information specified under the component required_info and call your Cisco technical support representative and provide the the gathered information with this error message text. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-VIDMON_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The VidMon feature is configured without the necessary license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LOW_VOLTAGE_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP voltage less than or equal to the low voltage alarm threshold. The CFP is the pluggable optics on the line cards. The voltage threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-6-OPTICS_OIR
### Response:
(Severity: 6), (Category: L2), (Description: Optics module has inserted %s - message related to the SFP insertion event), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-7-OPERATION_TRACE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message gave a trace message. This is not a failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_THREAD_SIGNAL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Failed to write to thread pipe in order to signal the thread for this mirror dir.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-0-PERMANENT_ONBOARD_LINK_DOWN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This alarm is raised indicating a local onboard fabric link is permanently down on the card. Software will reload the card to recover from this situation. recommended_action: If this alarm is seen across multiple reloads then please contact Cisco TAC support asap as the card possibly has a permanent hardware fault. *RECUR*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-DATASTORE_PROBLEM
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license manager encountered a problem attempting to adjust licenses in the given datastore. Check the error string to determine what has happened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-MSG_CHANNEL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_primary_server process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show cctl_primary_server location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_L2FIB-2-ELAN_MACTABLE_CLEAR_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Failed to clear the elan mac-table in L2FIB PD component.), (Recommended Action: Please unconfigure and reconfigure L2VPN to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-4-MEM_THROTTLE_EVENT_UNKNOWN
### Response:
(Severity: 4), (Category: IP), (Description: ANCP process has received an unexpected event, when expecting a memory usage event. Check memory usage for this process. This could occur because of an software error in the ANCP module or the Memory handler module itself, which could in turn have been caused because of memory shortage.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-SYSDB_ERR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Sysdb api call failed %s - indicates the reason of the failure. reason: %s - is the decoded error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-EVENT_MANAGER_DESTORY_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to destroy event manager on exec exit'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-2-EPM_SWITCH_LINK_FAULT_FATAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: one of critical link of EPM switch is down), (Recommended Action: The board will be reloaded. Switchover would occur if standby RP/RSP is NSR ready. At this stage please collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKEND-7-INVALIDARG_PATH
### Response:
(Severity: 7), (Category: SYSDB), (Description: Invalid arguments were supplied to a backend function), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-3-EVM_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when creating Event Manager.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-CE_SWITCH_DBG_SCRIPT_FAILED
### Response:
(Severity: 3), (Category: DIAG), (Description: A problem was encountered while trying to spawn a script. This may be a problem with lack of resources.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-4-FIB_CONNECTION
### Response:
(Severity: 4), (Category: FORWARDING), (Description: This message indicates that an error has occurred when initializing FIB event connection. Particular failure reason is included in the message.), (Recommended Action: This error occurs during process initialization. Please try restarting IP Tunnel Execution Agent process with the command <CmdBold>process restart ip_tunnel_ea location <node id><NoCmdBold> If the problem persists, contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-3-EVM_PROC_AVAILABLE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The system manager did not accept the proccess available that the rpl multi-version coordinator tried to post. The coordinator will exit so the system manager can restart it. Route policy may not be operational until this is resolved.), (Recommended Action: This error message may be transient. Restart policy_repository and try the use case again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_FIA_DRV_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fia Driver initialization failed), (Recommended Action: Restart the process using the CLI in exec mode - process restart fiarsp If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_BUF_CRC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected excessive input buffer CRC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-REGISTER_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: Failed to register Error description DLL.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Netio ltrace facility failed to initlize one of the trace buffers. The Netio trace information will not be available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-SEND_RESPONSE
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB server failed to send a message to the SysDB Medusa Client), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SRGB_ALLOCATION_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: During process startup ISIS was not able to allocate the SRGB, probably because there are already labels allocated from within the SRGB label range.), (Recommended Action: Verify that the SRGB range is free. If it is not modify the 'mpls label range' configuration to reserve space for the SRGB and reload the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-ERR_ACCT_ID
### Response:
(Severity: 6), (Category: SECURITY), (Description: Accounting task id is probably larger than 2^24 - 1), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-SAVED_PARTIAL_RESET_DEBUGS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Reset debug information was not fully collected, any information that was able to be collected before script was aborted are saved in the indicated file.), (Recommended Action: If this error persists, please collect the file shown in the message and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_WRITE_WITH_FMT
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods write with fmt error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-5-FAST_RESET
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The NP has recovered from a diagnostic error and is now back to normal operation.), (Recommended Action: No action is required if the NP has successfully recovered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD-3-SYSMGR_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Service Director attempted to notify SysMgr that it was exiting and SysMgr returned an error. If this coincides with an attempt to configure the locations of a service, then further error may be observed from SysDB.), (Recommended Action: Restart the Service Director process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERR_SENSOR_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates a failure in creating the sensor object for the specified slot and sensor. The sensor entry is not added to the inventory.), (Recommended Action: Issue may be due to lack of memory in the system. If memory shortage is the cause, reduce other system activity to ease memory demands and restart process invmgr via CLI 'process restart invmgr' to recover. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_SSRP
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error communicating with SSRP. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the SSRP, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-MSTATS_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature EA DLL encountered error on initializing interface with hardware statistics API. Process will be restarted automatically. On restart, Feature EA DLL will initialize interface with hardware statistics API and no action needs to be taken.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-SPABRG_INIT
### Response:
(Severity: 3), (Category: L2), (Description: SPAQFP Bridge has encounted an error during initialization), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-3-CCTL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DSC could not read back plane EEPROM. This might affect the booting up of the standby. If the standby does not boot then the work around is to set the rack number to backplane eeprom association using the following cli. (admin-config)#dsc serial <serial-id> rack <rack-num>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-ISO_INSTALL_NO_RESET
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-RX_RF
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM received a Remote Fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Correct the far end interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-3-OPERATION_FAILED
### Response:
(Severity: 3), (Category: LICENSE), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure. The process can continue functioning as expected despite the failure.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE_ERR_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE_ERR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. ltrace init failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-SVR_REG
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to register with WDSysMon server with an initialization message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install verify packages command in IOS XR?
### Response:
The 'install verify packages' command is used to verify the consistency and integrity of the currently active software packages on the router. It checks for any missing or corrupted files and reports any issues found.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-MAX_CONN_RETRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Reached the maximum number of retries to connect to server using event conn), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_0_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TABLE_INSERT
### Response:
(Severity: 3), (Category: OS), (Description: Unable to delete object from table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_POWER_PROFILE_MODE_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. Specific mode of NPU Power profile is not supported by some LC/FC. User configured this mode for a LC or RP (for FC cards), default mode will be effective.), (Recommended Action: Remove the configuration for that LC/RP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPP_PKT_TOO_SHORT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet too short error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-MIB_INIT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error occured while trying to initialize the etherlikemib DLL with the SNMP infrastructure. The error may result in the inability to retrieve data from the ETHERLIKE-MIB.), (Recommended Action: Such errors are not expected, and probably indicate an an inconsistency in the system state or loaded IF-MIB and ETHERLIKE-MIB DLLs. Determine if there is an initialization issue with the IF-MIB as well. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-2-ASIC_ERROR_HARD_RESET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An ASIC error has occured and hard reset is needed.), (Recommended Action: An error has happened and HARD reset has been performed to recover. Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-PEER_REACHABILITY_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has detected a failure with the peer node and has attempted to failover.), (Recommended Action: Use the <CmdBold>show l2vpn iccp-sm group group-num<NoCmdBold> and the <CmdBold>show iccp group group-num<NoCmdBold> commands to determine the cause of the peer node failure. Correct the failure for the given interface and the ICCP-SM fault will clear.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-HA
### Response:
(Severity: 3), (Category: ROUTING), (Description: error while doing an HA operation (e.g. starting frequent restart monitor)), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-PROBE_THREAD_CREATE_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPCD-3-ERR_INIT
### Response:
(Severity: 3), (Category: IP), (Description: A failure occurred during the initialization of the process. This may have resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE flooding threshold up/down feature?
### Response:
The MPLS TE flooding threshold up/down feature allows the control of when link bandwidth changes are flooded as a result of bandwidth increases or decreases. Flooding can be triggered when the bandwidth crosses user-defined up or down thresholds specified as a percentage of the link capacity. This reduces the frequency of TE flooding due to bandwidth changes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-INVALID_64K_INPUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The 64k composite clock signal has been invalidated possibly due to loss-of-signal condition or AMI violations.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Ensure valid 64kHz + 8kHz Japanese timing signal(defined in G.703 Appendix II.1) is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-GET_RENDEZVOUS
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: msg_chan_get_rendezvous failed.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-SATELLITE_INTF_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred on the satellite.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER_RSP4-3-FPGA_PROG_DONE_NOT_RECEIVED
### Response:
(Severity: 3), (Category: DRIVER), (Description: FPGA PROG DONE not received 1. After Power Enable 2. After Power reset), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_HDR_CSM_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA10 packet header checksum error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-IMP_ERROR
### Response:
(Severity: 3), (Category: SERVICES), (Description: Whilst attempting to implement one or more attachments, the service diversion infrastructure has hit one or more problems that were not solved by a retry, and as such one or more diversions may be in an inconsistent state. Retries will continue to be made, and a further message will be printed if this situation clears.), (Recommended Action: Running 'show firewall attachments' will provide information on which attachments are suffering from errors, and in which way they will not be operating correctly. These problems may be cleared by removing and re-attaching the service to the specified interface. If this does not resolve the problem, then support should be contacted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-INTF_STATUS_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: *SUPPORT*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-3-SYSDB_REG_VERIFY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The policy_repository process failed to register for verification of changes on the displayed database path.), (Recommended Action: The policy_repository process must be restarted before it can function correctly. If the message appears again, copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-NRS_CREATE_CLASS
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses NRS API to create nrs classes . nrs_create_class API failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 7), (Category: OS), (Description: Sysdb verifier registration failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_8
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port 8.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port 8 interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-EXTERNAL_API_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Common external API returned an error), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_EDM-3-DATALIST_ADD_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-MAIN_IF
### Response:
(Severity: 3), (Category: L2), (Description: Unexpected error on the main interface), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-UNKNOWN_MSG
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An unexpected message was received by this process. This is relatively a harmless error and should not have any immediate impact on the operation of tunnel interfaces. It must still be reported and looked into.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE-3-ERR_SHMEM_UNAVAILABLE
### Response:
(Severity: 3), (Category: L2), (Description: cHDLC MA has requested transfer of more interface records than shared memory can accommodate), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-UNSUPPORTED_IP_LENGTH
### Response:
(Severity: 3), (Category: L2), (Description: EVPN received an IMET route with unsupported IP address length.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CRYPTOMAP-2-PARSE_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: An error occured parsing show output data), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-HEARTBEAT_ALERT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Periodic sanity heartbeat messages from the line card have not been received. This is just an alert. If the problem continues a heartbeat failure message will be generated and the shelfmgr will attempt recovery by resetting the affected card or automatically attempting an RSP failover if needed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_RPC_OPERATION_JID
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-ERR_THREAD_FN
### Response:
(Severity: 3), (Category: SECURITY), (Description: The call to pthread functions, such as pthread_create, lock/unlock a mutex or wait on a condition, failed. The error is displayed in the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-6-ASIC_DISCOVERY_IS_PENDING
### Response:
(Severity: 6), (Category: FABRIC), (Description: 1. Driver periodically (every 30 secs) checks for the NPU devices to be discovered. When devices are not discovered this message is logged. If there is a delay in powering up the devices, a couple of messages may be expected.), (Recommended Action: If the messages are logged continuously, then either the devices are not powered UP and seen on the PCIe bus or the driver is not aware of the ASICs coming UP. Need to reload the board for recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_EA-3-STATE_CHANGE
### Response:
(Severity: 3), (Category: SERVICES), (Description: While the SBCSVI EA process was checking the state for the specified interface pair, an error was encountered. The interface pair in question may be left in an inconsistent state.), (Recommended Action: It may help to restart the SBCSVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Zl30160_ERROR-3-ERR_FTRUNCATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in ClkCtrl driver due to ftruncate function call failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_HEARTBEAT_FAILURE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected interruption in the periodic 'Hello' messages.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encounterd some error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_SHUTDOWN_LINK_FABRIC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and cause fabric link shutdown.), (Recommended Action: An error that causes fabric link shutdown has happened and been handled Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-6-DEFAULT_POLICY_ACCEPTED
### Response:
(Severity: 6), (Category: SECURITY), (Description: The default policy is being used because the local configured policies did not match with the peer's policies.), (Recommended Action: 'Check if this is indeed the desired ISAKMP policy to use. To avoid using the default policy, reconfigure the local policy to match with peer's policy')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Arbiter driver encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_DATA_FIFO_OFLOW_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg data fifo overflow on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_TS_CORE_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-0 timestamp core error on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_VRF_GLOBAL_REMOVE
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic network VRF has been removed globally'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET1_INTR_SOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET1_INTR_SOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-UPDATE_INTERRUPT
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: Control session to satellite disconnected while image update was in progress. Run 'show nv satellite protocol control' for more information.), (Recommended Action: Re-try the update once the session has reconnected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_OFF
### Response:
(Severity: 6), (Category: L2), (Description: The SSM Off condition applies to references used for timing the node. It occurs when the SSM for the reference has been turned off. The ONS system is set up to receive SSM, but the timing source is not delivering SSM messages.), (Recommended Action: Clear the SSM Off Condition)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_HDR_CSM_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA01 packet header checksum error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SSP_INTR_SP1_RX_NEOP_ERR_P_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SSP_INTR_SP1_RX_NEOP_ERR_P interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-RESET_MASK_BULK
### Response:
(Severity: 4), (Category: DRIVER), (Description: In order to perform the CCC reset for FC card, will have to unmask the buffer offset in backplane FPGA. Additional debug info On reload rack num command execution, ctrace logging will not available.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-4-ASSERT
### Response:
(Severity: 4), (Category: INFRA), (Description: The SERG process hits some abnormal condition. These warnings will not affect functionality of SERG.), (Recommended Action: Collect the traceback associated with this Log and contact the engineer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What scheduling algorithms are used by the IOS XR microkernel?
### Response:
The IOS XR microkernel supports three scheduling algorithms\n1. FIFO scheduling: Thread runs until it relinquishes control or is preempted. Used for kernel idle thread.\n2. Round-robin scheduling: Limits run time of a thread to a timeslice. Used for most processes.\n3. Sporadic scheduling: Thread runs at normal priority for a set budget time before dropping to low priority. Prevents starvation.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP allowas-in feature?
### Response:
The BGP allowas-in feature disables the default BGP loop prevention mechanism of rejecting prefixes that contain the local AS number in the AS path. It allows a specified number of occurrences of the local AS number to be present in the AS path of received prefixes. It is configured with the neighbor allowas-in command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an access list in IOS XR?
### Response:
To configure an access list, use the 'ipv4 access-list' command followed by the access list name and rules. RP/0/RSP0/CPU0:router(config)#ipv4 access-list ACL1
RP/0/RSP0/CPU0:router(config-acl)#permit tcp any any eq www
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-3-ASYNC_MSG_TAG_INVALID
### Response:
(Severity: 3), (Category: SYSDB), (Description: An internal error left the msg tag to be an invalid one. Causing the request to be timed-out.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OCIFIP_V4MA-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_EA-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An unexpected initialization error has occurred in the IPv6 EA component. Please collect the necessary traces and contact the TAC representative.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-RIB_ERR_PROTO_MODIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred on a request to modify the purge time in RIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-RSI
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external event manager function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-XBAR_TIMEOUT_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an crossbar timeout error on link 4), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE7_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE7_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MBR_BFD_STARTING
### Response:
(Severity: 6), (Category: L2), (Description: BFD sessions have been started on all the members of the given bundle. If the BFD session has not gone UP by the time specified in the message, the BFD session on the member of the bundle will be marked as DOWN, which may impact traffic.), (Recommended Action: Ensure that the bundle and its members are configured correctly on the neighboring router, and that all the interfaces are up. Ensure that BFD is configured on the member interfaces on the neighboring router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-ENFORCE_GRACE_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is still enabled after grace period.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-NO_TEST
### Response:
(Severity: 6), (Category: DIAG), (Description: The diagnostic test cannot find tests to run.), (Recommended Action: In some cases on some platforms, a Field Diagnostic image needs to be loaded onto the line card if you want to run the test. If applicable, download a Field Diagnostic image onto the line card. In other cases, the test is simply not available. This message is an informational and does not require user action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_PKT_MINLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-THREAD_CREATE_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to create threads.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you monitor BGP sessions in Cisco IOS XR?
### Response:
BGP sessions in Cisco IOS XR can be monitored using the 'show bgp sessions' command. It provides information about the status of BGP sessions, including the neighbor IP address, AS number, session state, and other relevant details.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_POWEROFF_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The power off operation for the indicated node has failed.), (Recommended Action: Check if the card in the indicated node is properly inserted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-3-SR_POLICY_BSID_UNAVAIL
### Response:
(Severity: 3), (Category: OS), (Description: Requested binding-SID for the SR policy could not be allocated due to some error. The most common error is that it is already assigned / allocated to other SR policy or to other app.), (Recommended Action: If reason is due to a conflict, please check the conflict and resolve accordingly. For MPLS, check 'show mpls label table label <bsid>' to find out the current owner of the label. For SRv6, check the SID-manager to find out the current owner of the local SID. If reason is an internal error, then try recovering it by restarting the xtc_agent process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-PAYLOAD_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: Diagnostics was unable to attach or detach the payload stored in shared memory to/from a packet in the queue. This is a serious error and should not occur. It may indicate there is a bug in the software. This is not a service impacting error.), (Recommended Action: Check the log ('show logging') to determine if there are any other related error messages. Also, please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area. If the error continues, copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Also collect the information from the 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-NO_MEMORY
### Response:
(Severity: 3), (Category: MEDIA), (Description: Not enough memory available in the system.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-STANDBY_DIS_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed to disconnect standby with the above reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-I2C_READ_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error occured while reading from I2C device. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_LIB-7-DEBUG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the PLIM library driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: 'show logging' to confirm sysdb errors)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_OUTPUT-2-CRIT_PKT_THREAD_SIGNAL
### Response:
(Severity: 2), (Category: IP), (Description: The FHRP Output process failed to signal end of initialization to the Main thread and will leave the Main thread hung. The process will assert to recover from this condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_ABORT_PREV
### Response:
(Severity: 1), (Category: INSTALL), (Description: Quickstart operation aborted because an error was encountered in one of the previous operations.), (Recommended Action: The reason for this qs operation failure has to be analyzed. Collect the show tech logs by running 'show tech-support qs' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-7-BAG_REG_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-GET_DATUM
### Response:
(Severity: 3), (Category: OS), (Description: Failed to get the the datum for the message connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-SYSMGR_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_MA-3-CONN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Connection error with IM or PIM.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-4-UNABLE_TO_RESYNC
### Response:
(Severity: 4), (Category: SERVICES), (Description: The Interflex Manager process was unable to reconnect to another process in order to prompt a resync. Interflex may now be out of sync with the rest of the system until it is restarted.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_LCTRL_LIB-3-ERR_LIB
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured with the line control library), (Recommended Action: Please provide the output of the line control trace to the TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFC_WATCHDOG-5-RESTORE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The Priority Flow Control (PFC) watchdog condition has cleared. PFC packets are no longer being continually received and the queue is being restored to send traffic.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PROVISION_PRE_CHECK_HOST
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when provision prechecks are performed on the disk/system), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO_COMMON-3-OUT_OF_MEMORY
### Response:
(Severity: 3), (Category: L2), (Description: The system is low on memory.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_TOKEN_MISMATCH
### Response:
(Severity: 3), (Category: SECURITY), (Description: There was a token error mismatch while the system was attempting to delete a record.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-7-INIT_SUCCESSFUL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-2-EVENTATTACHFAIL
### Response:
(Severity: 2), (Category: HA), (Description: The LR Daemon encountered an error when registering for synchronous or asynchronous events.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-INCONSISTENCY_DETECTED
### Response:
(Severity: 3), (Category: OS), (Description: RCC or LCC detected an inconsistency during verification of the route/label information between RIB/LSD and the FIBs. Please collect the inconsistency data and analyze the results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-4-PAK_HDR_INVALID
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An attempt has been made to fragment a packet buffer with a header length that is higher than allocated particle max size. This usually indicates the process using fragment apis might have miscalculated the header length that does not fit into a particle), (Recommended Action: Please collect a core dump of the process from which the message is output, using the 'dumpcore running' command to catch the current packet memory state ('exception pakmem on' must also be configured), the full console logs and 'show proc pidin loc <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOW_VERSION_CMD-7-SYSDB_BIND
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A Version Manager CLI command was unable to bind to the system database from which it obtains information. The command will not contain all expected information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-3-CONF_SOCKET_CREATION
### Response:
(Severity: 3), (Category: MGMT), (Description: This is expected in case Configuration database is down, once it is up this error doesnt come), (Recommended Action: Wait for configuration database to come up. The issue should be recovered once configuration database comes up)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-LOOPBACK_ALREADY_ASSOCIATED
### Response:
(Severity: 3), (Category: L2), (Description: Loopback is already associated with logical switch, first remove this association.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_EA-3-SSC_SEND_SRV
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a single message to the Service Director. The Service Director may not be up to date with the state of this services on this node, so the associated SBCSVI interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the SBCSVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-3-CHECK_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Generic failure caused by an error while processing an action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the two main types of IS-IS subnetwork types and how do they differ in terms of adjacency formation?
### Response:
The two main IS-IS subnetwork types are point-to-point and broadcast. On point-to-point subnetworks, no DIS is elected and routers send LSPs directly to neighbors. On broadcast subnetworks, a DIS is elected and LSPs are multicast to all neighbors.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_WDSYSMON_EVENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_INFO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error indicates a problem with the software on programming the hardware. This typically occurs when there is a problem with the resource utilization in the card where the error is seen. Here is a list of possible reasons for this message. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Resource limitations. This condition indicates a problem where the software has limited resources to operate on.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show memory location <> show cef trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-6-HBM_SAMSUNG_MEMORY_REPAIR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message in the SBUS Driver to indicate details about a HARD memory repair that has been performed on the specified HBM memory.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL1_LO_OVERRUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL1_LO_OVERRUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering fast reroute feature?
### Response:
The MPLS traffic engineering fast reroute (FRR) feature provides link and node protection for MPLS TE tunnels. It enables fast traffic recovery upon link or node failure using pre-signaled backup tunnels that bypass the protected resource. It is enabled on a per-tunnel basis with the tunnel mpls traffic-eng fast-reroute command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-4-ERR_CHKPT_DUPLICATE
### Response:
(Severity: 4), (Category: L2), (Description: Whilst restoring one of its checkpoint tables MFR MA found multiple entries for the same interface. MFR MA will use the first checkpoint entry it finds for each interface and ignore any subsequent duplicates. This is caused by a programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE7_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE7_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-NODEID_GET_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Self nodeid can not be obtained.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_12
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-LOAD_BALANCE_LINK_UP
### Response:
(Severity: 6), (Category: FABRIC), (Description: This info message indicate that there is no link down on the specified S2 ASIC due to fabric link load balancing.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-PULSE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SSM process sends a pulse to the monitored process over a lwm channel. This error is reported when it tries to open a connection to the channel and is stuck.), (Recommended Action: Collect system log information for the reported service and pid. For mentioned pid collect show process <pid> , follow process <pid> Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-REG_UNKNOWN_TYPE
### Response:
(Severity: 3), (Category: MGBL), (Description: could not find registry entry type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: MGBL), (Description: 'sysdb item set failed. The error is displyed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA Driver Initialization failed. Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-3-SOFTWARE_INSTALL
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the RAW process attempts to register with Install Manager for notification of software package installation and deinstallation on the system.), (Recommended Action: The process will attempt to recover from this situation by restarting or retrying. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-MASKFORMAT_REGISTER
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to register the maskformat in prefix form failed. The error is displayed in the message'), (Recommended Action: Collect show nvgen trace, show logging and send this to tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-OOR_GLOBAL_BSR_CRP_LIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: OOR Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-EARLY_RESTART_ABORT
### Response:
(Severity: 3), (Category: INFRA), (Description: The install orchestrator (instorchagt) was restarted very early during an install operation. No system changes were made, and the requested operation has been aborted. Please try the operation again. This operation will not appear in 'show install history'.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GRID_SVR-7-ERR_INIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Initialization of grid server process has failed due to one of the following reasons: 1) Failed to initialize GRID Server.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-AOOPT_SEND_NOKEY
### Response:
(Severity: 3), (Category: IP), (Description: There is no active send-key for the specified keychain and hence can't send data to the peer.), (Recommended Action: Check the keychain to see if it has any active keys. Sometimes, this error might come if there is no overlap between the send-keys. In that case, if keychain shows that there is an active key, then this error can be ignored. Else, change the configuration to have an active send-key.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-3-SYSDB_ITEM_ERROR
### Response:
(Severity: 3), (Category: HA), (Description: SysDB returned an error to LRd.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an information message in the ASR9K platform FIB specific code software. The message is for debug purposes only and not an error.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-RESET_STANDBY
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Issue hardware reset to peer standby RP or SC.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.=)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-REPLACE_DONE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package replace requested on this satellite has completed. Run 'show nv satellite status' for more information.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_XAUI_RDY_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-1 XAUI not ready on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-INVALID_TEST
### Response:
(Severity: 4), (Category: DIAG), (Description: A test ID for diagnostics that does not exist was requested.), (Recommended Action: Ensure the specified test ID number is supported by the line card. The list of available tests and their associated test IDs can be retrieved using 'show diagnostic content'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-5-INIT_FAILED
### Response:
(Severity: 5), (Category: HA), (Description: RMF server failed to initialize the specified item due to the the specified error. This failure will cause a restart of the RMF server.), (Recommended Action: If condition is reported multiple times, collect show redundancy trace location all and show logging outputs and contact customer suppport.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-5-CORE_FILE_NAME
### Response:
(Severity: 5), (Category: OS), (Description: Name of the core file), (Recommended Action: Displayed when a process is crashed. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-DATALIST_SET_MORE_FLAG
### Response:
(Severity: 3), (Category: ROUTING), (Description: A client has requested information through SysDB from OSPF. During execution of the request an attempt to set a flag indicating there is more data for the client failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-INVMGR_NO_VALID_NPUS_DETECTED
### Response:
(Severity: 2), (Category: L2), (Description: This fault indicates a condition where inventory manager did not send any valid max slice callback to npu driver.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-ISSU_READY_STATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The listed state refers to the state of ISSU, which is either 'ready', \ 'ready with NSR', or 'not ready'.), (Recommended Action: None. This is a solicited message (by \ 'logging events sync-updates' . User may verify the ISSU sync \ status as shown in the output of \ 'show mpls traffic-eng issu status detail'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_SYSDB_EDM_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq Sysdb Register EDM error.The driver might lose some of its functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-4-FABRIC_SHUTDOWN_BOARD
### Response:
(Severity: 4), (Category: FABRIC), (Description: Unsupported board in slot for the fabric mode configured.), (Recommended Action: Check running configuration if five fabric mode is configured In this mode, it is expected certain LC board types such as LC36 will not be supported this. Remove this board or remove the configuration if it is desired to bring up this board. Additionally FC cards in slots 0,6,7 will not be brought up)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOTHRA-6-INFO_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is a Informational message in the mothra driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Errors during improper updation of variables or incorrect return state in IPV6 FIB platform.), (Recommended Action: Please collect the required logs. Also notice if the error message is transient or persistent. If errros persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_CFG
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error encountered in RIP configuration functions.), (Recommended Action: Please retry the configuration command that caused this error and check running configuration to make sure it is correct. If the error persists open a case with TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD_INTF_EA-4-DB_ATTACH
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to connect to PIRD shared memory database on initialization.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-VIRTUAL_IN_NON_BACKBONE
### Response:
(Severity: 4), (Category: ROUTING), (Description: An internal error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please provide output from the following commands: - show version - show install active - show dll - show running-config - show logging - show ospfv3 <process-name> - show ospfv3 <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-INVALID_AIB_ENTRY
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'While deleting given AIB entry found it is invalid.' 'This will not effect the process.'), (Recommended Action: 'ISSU manager will use some alternate API' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_1_XAUI_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-1 from XAUI on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered a fatal error to create its event manager for receiving events. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-3-UPPER_FANTRAY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: As shown in the message.), (Recommended Action: Physical OIR of upper fan tray required to recover from this hang.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_STAT_PUB-3-SHM_EDM_ERR
### Response:
(Severity: 3), (Category: HA), (Description: A shared memory for statistics area might be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-FPGA_IMG_ERR
### Response:
(Severity: 2), (Category: L2), (Description: The FPGA is running rollback image, this could be caused by previous FPD failure. %s - device name, Rx MAC or Tx MAC.), (Recommended Action: Check if the previous FPD failed. Upgrade the FPGA with FPD CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-UNLOCK_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Internal error during unlocking of TCP resource.), (Recommended Action: Please try restarting the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_IO-3-UNHANDLED
### Response:
(Severity: 3), (Category: IP), (Description: The ipv4_io process has encountered a software error during normal operation from which it cannot recover.), (Recommended Action: The process will attempt to rectify this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-INVALID_PLATFORM_EVENT_IFH
### Response:
(Severity: 4), (Category: L2), (Description: The platform has triggered an event for an interface that has not been configured for Ethernet Link OAM. This indicates a bug in the software.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VLANIFMIB-4-MEMORY
### Response:
(Severity: 4), (Category: SNMP), (Description: The VLAN Interface table relationship MIB was unable to allocate sufficient memory to complete an operation. It is likely that an SNMP query that was in progress will not have been completed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-6-SVC_INFO
### Response:
(Severity: 6), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-CHUNK_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes igmp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes igmp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. *SH_CMD show igmp groups)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWTECH-2-CRIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GNSS-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_FWD-2-LOGICAL_PORT
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: Failed to get the logical port for the specified interface from the Platform Mgr. This will cause the interface to not get created properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-7-ERR_SYSDB_BAG_ENCODE
### Response:
(Severity: 7), (Category: FABRIC), (Description: FSDB server encountered error in sysdb bag encode operation. This could affect output of some of the fabric CLI commands.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-GETLINE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: getline_init() failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR0_INTR_FC_BUF_OVFLOW_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR0_INTR_FC_BUF_OVFLOW interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-UNKTIMER
### Response:
(Severity: 4), (Category: ROUTING), (Description: The type of the expired timer is unknown to EIGRP. If the unknown timer was suppose to be one among the known timers then there could be some effect depending on what the known timer was. The problem may resolve itself if the timer expires again with correct type. To name a few: 1. If the unknown timer was suppose to be \'RIB related timer\' then the effect could be that EIGRP may fail to install the prefixes in RIB. 2. If the unknown timer was suppose to be \'Event related timer\' then the effect could be that EIGRP may fail to join the multicast group on certain interfaces. 3. If the unknown timer was suppose to be \'Active timer\' then the effect could be that EIGRP may fail to send the SIAQUERY and hence fail to do the necessary cleanup for the Active route.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_DATABIT_STUCK_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory databit stuck on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-BUS_UNKNOWN_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A PCI/PCIe bus error has occurred. The error type is unknown. If the device indicated in the message is the root port, the error could be reported by any device in the root port's hierachy, or could be reported by the root port itself.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error in PLATFORM FIB HAL indicates that engine object initialisation failed for NH info IP tunnel), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show logging, show version, show platform, show install active, show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-4-XR_PART_PREP_RESP_ERR
### Response:
(Severity: 4), (Category: INFRA), (Description: SDR/XR partition preparation has failed. SDR Mgr will retry the same operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_VPLS-3-INIT_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the VPLS module in the platform L2FIB VPLS component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOSHAL-6-FLOW_QOS_CONFIG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'Any change in flow qos max flow count requires the LC to be rebooted to ' 'take effect.'), (Recommended Action: hw-module location <line-card-location> reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How are control plane packets handled differently from transit packets in Cisco IOS XR?
### Response:
Control plane packets, which are destined to the router itself, go through the Local Packet Transport Service (LPTS) for classification and rate limiting before being delivered to the relevant processes. Transit packets are forwarded directly in hardware and do not go through LPTS processing.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-3-REG_PROC_FAILED
### Response:
(Severity: 3), (Category: HA), (Description: Process registration for node memory state with wdsysmon is Failed.), (Recommended Action: Collect show tech watchdog and contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-INIT
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred during initialization. The Install infrastructure will not be able to function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_CHKPT_DUPLICATE
### Response:
(Severity: 4), (Category: L2), (Description: Whilst restoring one of its checkpoint tables PPP MA found multiple entries for the same interface. PPP MA will use the first checkpoint entry it finds for each interface and ignore any subsequent duplicates. This is caused by a programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-TRACEBACK
### Response:
(Severity: 3), (Category: OS), (Description: 'Observed a GSP traceback on console.'), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-CTRL_BADMAGIC
### Response:
(Severity: 7), (Category: OS), (Description: Internal debugging message. For subsequent analysis of magic number corruption, snapshot of running process core dump has been taken.), (Recommended Action: Informational only. Indicates magic number corrupted and has been recovered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-LOST_SYNC
### Response:
(Severity: 7), (Category: MEDIA), (Description: Syncfs failed to transfer the specified file to the standby card.), (Recommended Action: Ensure there is sufficient disk space on standby card's filesystems, and that all removeable media is correctly inserted. Once resolved, power cycle the standby card using 'hw-module slot X shut' and 'no hw-module slot X shut' to resume synchronization.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-7-ERR_SYSDB
### Response:
(Severity: 7), (Category: SECURITY), (Description: 'Failed to execute a SysDB operation'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ND_REGISTRATION_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: ISIS was unable to register with ND to preload IPv6 mac address resolutions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOR-4-INTERNALERR
### Response:
(Severity: 4), (Category: INSTALL), (Description: An internal software error occurred.), (Recommended Action: An internal error occured before the install operation could complete. This internal error will be recovered automatically. Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE-3-ERR_LL_DLL_ASYNC_SEND_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to send pulse to LACP lite process fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_CORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory correctable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSPI_PROT_GAP_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RxSPI protocol packet gap error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CALVADOS_DUMPER-6-COPY_SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: Dumper has copied targeted file successfully), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-NULL_TRANSPORT_CALLBACK
### Response:
(Severity: 3), (Category: OS), (Description: Detected a NULL transport callback function.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-4-WARNING_FIPS
### Response:
(Severity: 4), (Category: SECURITY), (Description: The sshd encountered a warning condition.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-DBG_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some error occured while trying to initialize/register debugs. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-CRC_ERROR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message received from Canbus Controller has CRC error computed. This is indicative of a low level serial device transmission error. In most cases, the message is fully recoverable automatically.), (Recommended Action: Provide the following CLI output: (admin)# show canb trace loc <target nodeid> (admin)# show canb server-stats loc all (admin)# show env volt Wait 5 minutes, again give CLI: (admin)# show env volt If the voltage output looks correct, then there is likely no negative impact from the CRC error. If the voltage output looks incorrect, wait 30 minutes and give the CLI command again. If the voltage output still looks incorrect, If this error occurs repetitively for a particular card, contact TAC for further evaluation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-SPURIOUS_NODE_DOWN
### Response:
(Severity: 3), (Category: OS), (Description: GSP process receives notification that the node it's running on is down. Communication over GSP will be cutoff to/from this node.), (Recommended Action: In admin mode, show tech shelfmgr In order to recover, OIR the node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The Platform Manager encountered an provisioning warning.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PARTICLE_BIG_POOL_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Big pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_RX_ALIGN_LOSS_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Rx alignment loss on XAUI to NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL_SHM-7-ERR_INIT_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: Initialization of ITAL failed. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER_SNAP-3-INSANE
### Response:
(Severity: 3), (Category: OS), (Description: The process explicitly configured a threshold of how many non-invasive voluntary coredump requests should be permitted before deeming the process insane. This has been exceeded, and so the process is being restarted.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power less than or equal to the low Tx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SCAN_STACK_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Core dump failed because scanning stack for the process failed.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_BW_CHG-6-BWCHG_LOG
### Response:
(Severity: 6), (Category: QOS), (Description: This is an informational message from the QoS EA Process, it indicates that bandwidth change happened for an interface.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-6-CORE_COPIED
### Response:
(Severity: 6), (Category: OS), (Description: Copied core file to specified path.), (Recommended Action: This message is information only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONCERTO-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CONCERTO Driver encountered a fatal error and is not able to recover. The supplied text string will explain the reason. Call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while attempting to create an event manager. This failures affects the ability of the process to service various messages / pulses from other threads / processes. This facility is deemed crucial and the process automatically restarts on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_IWF_IF_SES_LMT_NO_REACH
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address on the given access interface is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-2-CBC_BROWNOUT_RESET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Brownout condition for the specified node has been detected by CBC. Shelfmgr is resetting the node to see if it can come up in subsequent attempts.), (Recommended Action: Ensure that the system has enough power. Check the power source for the chassis is working correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-ACTIVATE
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the activation of the Service Virtual Interface infrastructure. Activation occurs when the card transitions to ACTIVE state. This error resulted in the restart of the process.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'redistribute' command in OSPF?
### Response:
The 'redistribute' command is used to inject routes learned from other routing protocols, static routes, or connected routes into the OSPF routing domain. This is commonly used at the edge of an OSPF domain to import external routes. The redistributed routes are advertised as external LSAs (Type 5 or 7) by the Autonomous System Border Router (ASBR).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_LNK_FAULT_ERROR_5
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the XFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do XFP OIR. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-4-BLOCK_OOR_GREEN
### Response:
(Severity: 4), (Category: ROUTING), (Description: The SRv6 SID manager database is no longer in a Out of Resource or Warning state. Normal local SID allocation operations have resumed. Details about the limit can be seen with <Bold>show segment-routing srv6 manager<NoBold> command. Details about the block can be seen with <Bold>show segment-routing srv6 block<NoBold>. The list of local SIDs can be seen in <Bold>show segment-routing srv6 micro-segment local-sid<NoBold>), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CVAC-3-FILE_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: An error was encountered when CVAC (Cisco Virtual Appliance Configuration) was trying to perform the specified operation on the specified file.), (Recommended Action: If possible, identify the reason for the error and make appropriate changes to fix the error. You may then reinsert the media containing this file and issue the 'reload' command to cause CVAC to run again after the router reloads.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_TF_INTR_FIFO_1LO_OVFL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_TF_INTR_FIFO_1LO_OVFL interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIP-4-DB_ATTACH
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to connect to PIRD shared memory database on initialization.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-7-PROC_READY
### Response:
(Severity: 7), (Category: OS), (Description: PlaceD was unable to inform SysMgr that it had completed its initialization.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALLOCATOR-3-LTRACE_INIT_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Ltrace initialization failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-CDI_SERVER_INIT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error. Frequency synchronization is disabled.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-FALLBACK_MACSEC_SAK
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-DISK_WARN
### Response:
(Severity: 4), (Category: HA), (Description: When some monitored disk's usage is above 80%.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-SWITCHOVER
### Response:
(Severity: 3), (Category: HA), (Description: You have configured switchover of RP on specified memory level. system collects debug information and checks feasibility of switchover and if allowed it will go ahead to do that. Node with memory hog will come backup as standby after reboot is over.), (Recommended Action: User need not do anything. Configuration will take care. Debug info saved on disk will help debugging the issue afterwards.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-UPDATE_DONE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package update requested on this satellite has completed. Run 'show nv satellite status' for more information.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_INVALID_DATA
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Wrong/Unknown Input'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in FIB MPLS. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration. - Resource limitations. This condition indicates a problem where the software has limited resources to operate on.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show memory location <> show cef trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-RUMP_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to notify RUMP about a newly registered protocol. See error message for more details. The result is that routes from the new protocol will not be redistributed into the multicast table.), (Recommended Action: Restart the RUMP process. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-IM_STATE_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: PIRD encountered an error while trying send a state message to Interface Manager, and the error could not be recovered from by retrying. Interface Manager is likely to continue to wait for a response, and then shut down the affected interfaces.), (Recommended Action: The state operation is not essential to the operation of PIRD, so if no ill effects are observed then no action is needed. If the Interface Manager shuts the interfaces down unexpectedly, then try issuing 'no shutdown' for each affected interface, to refresh the state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPP_PKT_F2_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 2 single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-DB_CLEAR_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered when attempting to clear the DB. DB might be in any state now & so usage of hat DB might fail with unexpected results.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Also, restarting the local DB process might help recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-5-MEMORY_LIMITS
### Response:
(Severity: 5), (Category: MGBL), (Description: Perfmgmt server could not restore configured memory thresholds. Perfmgmt server will restore the defaults for memory limits.), (Recommended Action: Reconfigure the memory thresholds via cli.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-AAA_UNREACHABLE
### Response:
(Severity: 5), (Category: L2), (Description: AAA process or Server is unreachable. Authentication will be reattempted), (Recommended Action: Check AAA connectivity by checking local radiusd client process and external AAA/EAP server connectivity)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when registering debug.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-7-SYSDB_FD_CLOSED
### Response:
(Severity: 7), (Category: ROUTING), (Description: This notification indicates that RIB component is closing the connection with sysdb. Ignore the log if RIB or sysdb is restarting.), (Recommended Action: If RIB or sysdb is not restarting while this message is logged check if RIB show commands are working. This message is added to catch this exact scenario.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-4-WARNING_INFO
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Warning information during improper updation of variables or incorrect return state in MPLS FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TP_SW-4-CLIENT_CONNECT_TIMEOUT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that Connect timer is timed-out for TP-LXC client), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-4-ERR_ASIC_CRC
### Response:
(Severity: 4), (Category: FABRIC), (Description: CCSQ block received a packet with a CRC error. It is primarily caused by either the link errors between the devices or packet corruption in the upstream asic. This error may cause performance degradation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCID_SERVER-3-ERROR_CHKPT_TRAN
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MCID process encountered the specified error during checkpoint translation.), (Recommended Action: No action is required. Platform software will correct itself if this happens)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-7-ERR_RETRY
### Response:
(Severity: 7), (Category: OS), (Description: Retry count exceeded the limit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-ENCAP_REMOVED_PW
### Response:
(Severity: 4), (Category: L2), (Description: Encapsulation in the pw-class is deleted, all non-static pseudowires attached with this pw-class will be unresolved as encapsulation type becomes unspecified.), (Recommended Action: Configure the pseudowire encapsulation in the pw-class and re-attach the pw-class to the pseudowires.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-3-MUTEX_LOCK_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The mutex lock for accessing register returned error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-SOCKET_BUFF_EXIT_STRING
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Trying to track the EXIT string. %x- Value of the socket buff at index 0 and 1 respectively.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_ITEM_LOCAL_MISCONFIGURATION
### Response:
(Severity: 5), (Category: L2), (Description: If there is a misconfiguration for an item that may be resolved without user intervention, then the item will be temporarily ignored. Once the misconfiguration is resolved, either by a resync of mLACP data or by the user, the item will no longer be ignored.), (Recommended Action: If the alarm does not clear, ensure that the configuration (on both local and peer device) is as expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-BP_IDPROM_NOT_AVAILABLE
### Response:
(Severity: 3), (Category: DRIVER), (Description: The presence of the backplane IDPROM module is no longer detected by CCC FPGA, this might indicate some HW access commnication issue.), (Recommended Action: If both RPs in the system does see the same issue, then this could be HW issue on the backplane IDPROM module in the chassis. Try to power cycle the whole chassis to see if the problem is resolved. If this condition is only seen by one RP, then try to reload the RP to see if it can recover from the failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM-6-PARAM_NOT_IN_RANGE
### Response:
(Severity: 6), (Category: L2), (Description: A value in class attach onto interface or controller not inherited.), (Recommended Action: No Action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-EVENT_BLOCK_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: Error during event block), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-NULL_CALLBACKS
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A statically linked NetIO DLL has invoked a NetIO API before the callbacks table has been initialized), (Recommended Action: If this message is seen then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of BGP soft reconfiguration?
### Response:
BGP soft reconfiguration allows the router to store a copy of the routes received from a neighbor before any inbound policy is applied. If the inbound policy is changed, the stored routes can be re-evaluated without tearing down the BGP session. It is enabled with the neighbor soft-reconfiguration inbound command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-BKT_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter driver detected a bkt module error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_6_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-SITE_REGISTRATION_LIMIT_EXCEEDED_ON_CONFIG
### Response:
(Severity: 4), (Category: IP), (Description: 'The newly configured limit is less than the current ' 'count of registrations.'), (Recommended Action: 'Issue clear lisp <id> site for limit to take immediate effect.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-3-DEBUG_INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Some error occurred in interactions with debug infrastructure. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBQOSMIB-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble allocating memory.), (Recommended Action: Collect required_info and provide them to TAC, and the collected information will be used only for internal diagnosis purpose, then restart the process via cli 'process restart mibd_interface')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-ERR_MSG_CLIENT_SEND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in CPUCtrl driver due to client which tried to send message failed.The error string updates the client name reason for the message send failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-DEVCTL
### Response:
(Severity: 3), (Category: HA), (Description: Failed to open procfs file or directory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM-6-CNTRLR_INHERITED
### Response:
(Severity: 6), (Category: L2), (Description: Inherited values from the class attached to the parent controller. If the parent controller of the interface has a cem-class attached, its values are applied, else reverted back to default values.), (Recommended Action: No Action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-FLAG_VALUE
### Response:
(Severity: 3), (Category: L2), (Description: SPA shut and unshut is done based on the flag value from install director Based on the flag value in sysdb, API does shut or unshut of spa.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of BGP communities?
### Response:
BGP communities provide a way of grouping destinations into communities and applying routing decisions based on the community. Each community is represented by a 32-bit value, with the format AS:NN. Well-known communities include no-export, no-advertise, internet, and local-as.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-SAK_CIPHER_MISMATCH
### Response:
(Severity: 3), (Category: L2), (Description: The received cipher is not configured or supported), (Recommended Action: If received cipher is supported, change configuration at receive side or change cipher at KS to include the supported cipher)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_1_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power less than or equal to the low Tx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINEPROTO-5-UPDOWN
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The data link level line protocol changed state.), (Recommended Action: If the state change was unexpected, confirm the configuration settings for the interface and line protocol.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-4-THREAD_MUTEX_UNLOCK_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: DSC media DLL encountered an error while un-locking a mutex. The operation related to the resource may be affected while the system continues to run normally.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-PD_RESYNC_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The SPAN EA was not able to update traffic replication programming in the hardware. It is possible that traffic will be replicated incorrectly at some source interfaces, and that hardware resources will not be released. Use 'show monitor-session status' to determine which interfaces are affected. Standard forwarding will not be affected.), (Recommended Action: This message is likely to indicate a problem with programming the hardware. Attempt to resolve any memory issues before attempting to solve the problem. If recently applied configuration changes have not been enacted in the hardware, reverting and then re-applying the configuration changes may help to resolve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XML_TTY-7-SSLINIT
### Response:
(Severity: 7), (Category: MGBL), (Description: An internal error has occurred in the XML SSL Agent. SSL library initialization may not be able to complete correctly.), (Recommended Action: Retry the XML request that had the error. Transient conditions should have passed, and in all likelihood, this request will go through. If not, close this TTY session, and restart a new TTY session. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GNSS-4-MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOSHAL-6-QOS_MODE_UNSUPPORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'A configured qos mode is not supported on this LC.'), (Recommended Action: remove configuration of the unsupported QoS mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_GROUP_RANGE_THRESHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: This router has reached the threshold value for the number of group ranges allowed to be received through the given group-to-RP mapping distribution mechanism. This is a warning that the maximum value is being approached and steps should be immediately taken to reduce the number of group ranges being distributed by the given mechanism or to configure a higher maximum value.), (Recommended Action: Consider reducing the number of group ranges advertised from some set of the candidate-RPs or consider reducing the number of candidate-RPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_8_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-ERR_RACK_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The RACK entry is a must in inventory management), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Inventory Manager process will restart automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBHELPER-7-LOCKING
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library has either failed to aquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-CCTL_SENSOR_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The sensor initialization is not proceded due to invalid index entry.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_SYSMGR_MON_LIB-3-SYSMGR_CONN_LOSS
### Response:
(Severity: 3), (Category: HA), (Description: Sysmgr failed to connect with vm-monitor.), (Recommended Action: This indicates an sysmgr process is hung or unable to communicate with watchdog.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-7-SVC_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: A service API debug is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_rio_netio-3-INIT_TRACE
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error occurred during initialization of the trace facility. There will be no NetIO trace messages for service ingress diversion. The 'show services diversion rio netio trace' command on this node will not function correctly. Otherwise service ingress diversion will work correctly.), (Recommended Action: This is not a fatal error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-2-SDK_VRID_TCAM_NOMEM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: In VRRP non-scale mode DPA failed to program the vrid in 16 entry TCAM because the TCAM is FULL.), (Recommended Action: Move to VRRP scale mode by configure the hw-module vrrpscale enable and reload the line cards.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_EVENT_CONN_EVM_HANDLER
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for the posix message queue. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-CARD_RELOAD_POST_SCAN
### Response:
(Severity: 6), (Category: FABRIC), (Description: Recover the card with reload following ASIC scan.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-SYSCALL
### Response:
(Severity: 7), (Category: HA), (Description: A system call failed in the wdsysmon library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-TCAM_INVALID_REG_NAME
### Response:
(Severity: 5), (Category: OS), (Description: A Pre-IFIB region with unrecognized name is found in the TCAM.), (Recommended Action: Check the status of TCAM Manger because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-NO_POWER_AVAIL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The system has attempted to powerup the target node, however the system does not have the electrical power needed to execute the request.), (Recommended Action: - Please collect the following CLI command to determine the current budget situation and to see if there are any failed power modules. <CmdBold>admin show environment power-supply<NoCmdBold> - Install additional power supply modules and in case of presence of failed power module(s), replace those unit(s). - After the above step, issue the following CLI command to attempt to reload the affected card: <CmdBold>hw-module location <target slot> reload<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-LINK_ANOMALY_SET
### Response:
(Severity: 6), (Category: ROUTING), (Description: ISIS was notified of a link anomaly condition on the specified interface and has increased the per-level link metric as specified by the 'metric fallback anomaly' configuration.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath aigp ignore' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath aigp ignore' command is used to disable the Accumulated Interior Gateway Protocol (AIGP) metric for best path selection. AIGP is an optional, non-transitive BGP path attribute that carries the accumulated IGP metric for the path. By default, if AIGP attribute is present, BGP uses it for best path selection. This command disables the use of AIGP in best path calculation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_IM_INTERFACE_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error while deleting an IM interface.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_ILMI-2-INTERNAL_MSG
### Response:
(Severity: 2), (Category: L2), (Description: Internal error message. first %s - Type of failure second %s - reason for failure The error could be from various reasons. The message itself contains a good info.), (Recommended Action: Action to be taken based on the error message. In case of initilization/registration failures. Restart the atm_ilmi process for recovering. Check memmory conditions in case of memory related msg. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_STAT_VEC_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 state error on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-VIDMON_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The VidMon feature is configured without the necessary license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-TCAM_ODS8_THRESHOLD_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The TCAM utilization for the Logical Table (LT) ODS8 partition on a specific LC has exceeded the provisioned warning threshold (%)), (Recommended Action: Limit TCAM Logical Table (LT) ODS8 usage accordingly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-DLL_OPEN_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: The RS232 DLL was unable to open a DLL.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-ENS_PUBLISH
### Response:
(Severity: 3), (Category: OS), (Description: RDS producer calls writer aquire and which in turn calls ens_publish. This call may be failed due to underneath transport issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-3-UNREG_PROC_FAILED
### Response:
(Severity: 3), (Category: HA), (Description: Process un-registration for node memory state with wdsysmon is Failed.), (Recommended Action: Collect show tech watchdog and contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-INIT
### Response:
(Severity: 3), (Category: SNMP), (Description: This is internal error while intialising the datastructure during snmpd process intialization.), (Recommended Action: Please restart snmpd process , if still noticed the error contact technical support representative with required info. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-MIB_TRAP_NFN_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: Frequency Synchronization was unable to perform a MIB notification for one of its configured traps. A MIB client listening may have missed a notification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIA-7-REG_PM_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: PM_FAULT_REGISTER_DEVICE registers a device instance with the fault report API. This step must be done before the device driver may report faults. It should be done at the init phase rather than when an error occurs. When registration of device instance failed, fault reports are not logged.), (Recommended Action: 'Check show process PCMCIAD output. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-6-LTRACE_INIT_FAIL
### Response:
(Severity: 6), (Category: QOS), (Description: Ltrace initialization failed within EA. Ltraces may not be printed), (Recommended Action: Try restarting QoS EA process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-INTF_UPDATE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon was unable to record a change in the state or MAC address of one or more interfaces. This is likely caused by a memory resource allocation error.), (Recommended Action: Attempt to resolve any system resource constraints, and then issues 'process restart ethernet_link_oam_daemon' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_VM_INTR_PA_SOF_EOF_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_VM_INTR_PA_SOF_EOF_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-CHASSIS_SHUTDOWN_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The shutdown of the chassis was unsuccessful due to the reason mentioned in the message .), (Recommended Action: Chassis shutdown is typically initiated due to some critical failure. As the software initiated chassis shutdown has failed, the user should intervene and shut down the chassis manually.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_RETRAIN_LINK
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and cause retrain link.), (Recommended Action: An error that causes retrain link has happened and been handled *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-0-XFI_TRANSIVER_RESET_FAIL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: FPGA XFI initialization failed.), (Recommended Action: The software is not able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-1-FC_I2C_ERROR_OR_TO
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-G8032_J2_CONFIG_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: G8032 is not supported on LCs that have names starting with NCS57.), (Recommended Action: Remove the unsupported interfaces from G8032 config.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-EA_LIB_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The Ethernet Link OAM EA failed to clean up correctly. It will exit anyway, and no further errors should be seen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_LOST_GROUPS_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp groups summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp groups summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-7-RACK_DELETE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: While trying to update the new rack entry values from sysdb, Failed to remove the old ones.It will anyway go ahead and rewrite the existing ones with the new ones.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-LIB_REG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Registration with an external library failed. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TTY_MGMT_SCAN
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to tty_mgmt_scan() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_DB-2-PANIC
### Response:
(Severity: 2), (Category: MGBL), (Description: A critical internal error has ocurred which requires the process to restart. For example if a lock cannot be released then the process is restarted to avoid deadlock.), (Recommended Action: Please get the information specified under the component required_info and call your Cisco technical support representative and provide the gathered information with this error message text. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_12_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-3-MIPC_NOTIF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TLU received notification from MIPC due to unrecoverable error or invalid address. client downloads the entire table to hardware as a recovery mechanism. This is an informational message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-2-LC_IDENT_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Hardware in the specified location could not be verified as a genuine Cisco product.), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather the output of CLIs 'show diag <lc> eeprom-info', 'show tech-support ethernet interfaces'. Please ensure that the line card daughter board card type, board PID and serial number are not modified. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are BGP update groups and what are their benefits?
### Response:
An update group is a collection of peers with identical outbound policy. On IOS-XR, peers with the same outbound policy are automatically assigned to the same update group. Update generation is done once per group, conserving resources. Debugs also operate at the update group level.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_CT_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: A failure occured during the initialization of the process. This may have resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-ERRMACRELOAD
### Response:
(Severity: 6), (Category: INFRA), (Description: MAC error were detected.), (Recommended Action: To determine why this problem occurred, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-ERR_STR
### Response:
(Severity: 3), (Category: L2), (Description: Platform IPv6 FIB, error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|ipv6] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-3-FREE_ALL_RSRC_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The freeing all resource operation failed for the client due to the reason.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_RPC_OPERATION_NAME
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_EARF_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-DIAGNOSTIC_INFO
### Response:
(Severity: 6), (Category: DIAG), (Description: An Info message for the diagnostic.), (Recommended Action: This is an info message, no need to take any action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-SESSION_LIMIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Attempted to create SSH Sessions more than configurd maximum), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-2-RECOVER_BACKUP_BIOS_BOOT_FAILED
### Response:
(Severity: 2), (Category: DRIVER), (Description: The device is detected to be booted from backup BIOS. Backup BIOS is only to debug the problem with the main BIOS but system can't run with it properly. Hence, tried recovery, but failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Log will be collected in /misc/disk1/log directory in admin prompt 1. Copy the log collected in /misc/disk1/log directory in admin prompt 2. show tech card-mgr 3. show tech ctrace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-5-CARD_RELOAD
### Response:
(Severity: 5), (Category: OS), (Description: SSM Process is taking recovery action for the failing service. Reload is the specifed recovery action for this service.), (Recommended Action: Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: CEPKI general error message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_4_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-3-CONFIG_INVALID_NODEID_CLEAR
### Response:
(Severity: 3), (Category: L2), (Description: The misconfiguration that had been caused by invalid multi-homing node IDs has cleared either through local configuration or by the remote peer.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MANSDORF-3-NO_INTR_HANDLER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A critical condition occurred in MANSDORF layer. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - No interrupt handler. This condition indicates a problem with the software when there is no interrupt handler for MANS.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show logging show running-config show cli history detail loc <> sh plim services trace driver info sh plim services trace driver error </RP> <LC> </LC> <TECH> show tech-support location <> show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PROVISION_PRE_CHECK_VM
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when provision prechecks are performed on the disk/system), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_BILLING-3-PATHERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the creation of an sbc billing cache path. SBC billing application will not be able to save billing records), (Recommended Action: Make sure that the the drive needed for the type of SBC billing you need (local or remote) is mounted and formatted. Delete the SBC instance and create again to mount the SBC billing drives.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_PTHREAD_SET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVC_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: After detecting an error with the connection to the specified service, PPP MA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: ClkCtrl Event Manager event block error), (Recommended Action: Please attempt to correct the error by restarting the process. Issue the command in exec mode -process restart dao_tmp If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
METRO_STATS_API-7-ERR_THREAD
### Response:
(Severity: 7), (Category: L2), (Description: This error indicates that the Hardware Stats Manager Library is unable to initialize/destroy locking for client's attributes and tables.), (Recommended Action: An error was returned by Stats Manager APIs to applications. Applications receiving this error will report it. Take recommended actions specified in the application's error message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CDR_MSG_REPLY_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric:CDR driver LWM message reply failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Interrupt controller Driver Ltrace initialization failed.), (Recommended Action: Please attempt to correct the error by restarting the process. Issue the command in exec mode -process restart longbeach If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JBI-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message from the altera JTAG player, it indicates that something has gone wrong with FPGA programming.), (Recommended Action: File a DDTS)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-EXTRANET_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred in MRIB MVPN EXTRANET operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-INVALID_OPTION_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The operation is failed due to an internal software error. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause linecard reload. %s - description %x - option value), (Recommended Action: Check if the linecard reported any other errors. May need to restart process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_UCORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory uncorrectable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-LC_EOBC_FAILED_STBY_RSP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This line card has lost EOBC heartbeat to the standby RSP.), (Recommended Action: If this happens during system booting and switchover or when the standby RSP is not in 'IOS XR RUN' state, this message can be safely ignored. Otherwise, If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-VOLTAGE_SUPPLY_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Software periodically reads voltages on fabric cards. If the voltage read is outside of valid range, this message will be displayed.), (Recommended Action: This condition indicates a potential hardware problem with the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_ABORT_PKG_MISSING
### Response:
(Severity: 1), (Category: INSTALL), (Description: ISSU operation aborted due to the displayed error.), (Recommended Action: The error message from install, included as part of this output, may make the cause of the failure clear, in which case appropriate action should be taken to remedy the problem. If the issue is not clear from the message then the reason for the failure will need to be analyzed; collect the output of 'show tech-support issu' and 'show tech install' and forward the logs to the TAC. Provide details of any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-DISTRIB_RECONNECT_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The SLA Client Library has failed to resync the configured profiles with the Profile Manager after one minute of retrying. Further retries will be attempted every 30 seconds. Until the client is resynced with the SLA Profile Manager any recent additions or changes to profile configuration will not be acted upon. Note: if SLA is not configured for the protocol which emitted this error message there is no effect and this error can be ignored.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-6-SDR_NM_ACK_RCVD
### Response:
(Severity: 6), (Category: INFRA), (Description: Inormational message that SDRNM acked reload request), (Recommended Action: None No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-2-ASYNC_SHMWIN_RECOVER
### Response:
(Severity: 2), (Category: IP), (Description: The socket library has encountered an error while using one of the shmwin API for ASYNC sockets. This indicates that there is in-consistency in the shmwin window and it is no more in usable state.), (Recommended Action: The information in required_info to be collected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_CLIENT-3-CONFLICT_ISSU_FLAG
### Response:
(Severity: 3), (Category: HA), (Description: When chkpt is used by multiple DLLs from within the same process context, they all need to specify same value for shared memory reuse flag.), (Recommended Action: Save the above error message. Note down the component ID from the above error message and open a DDTS against that component and attach this error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KENSHO_GL-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Topaz LC Kensho-GL CPU Subsystem DLL warning message. No system functional impact.), (Recommended Action: Nothing. Reporting normal progress of Topaz LC Kensho-GL CPU Subsystem DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-TRANSACTION_PENDING_FLAG
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to clear, set, or get transaction pending flag. That can only happen if the APIs to do that are called before shared mem window is opened, or if thereis a bug), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_FC_OOS_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-PLIM_KA_INIT_ERR
### Response:
(Severity: 5), (Category: L2), (Description: Creating SPA keepalive server failed.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP confederation in IOS XR?
### Response:
BGP confederation is configured in IOS XR to divide a large autonomous system into smaller domains for easier management. router bgp 65000
bgp confederation identifier 65001
bgp confederation peers 65002 65003
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-INVALID_ARGS
### Response:
(Severity: 7), (Category: OS), (Description: A function was invoked with invalid arguments This is a generic error message and happens when the calling function invokes the caller function with invalid arguments), (Recommended Action: This is a Debug message. No action required. If problem persists,contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM-3-CLASS_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An API call in cem_class process failed. First %s - Type of Error Second %s - Reason), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-7-SOCKET_INIT
### Response:
(Severity: 7), (Category: IP), (Description: An software error occured when the RAW process do socket related initialization.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-4-MULTICAST_THRESHOLD_CROSSED_LNK1
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Crossbar driver detected multicast queue utilization is over configured threshold.), (Recommended Action: This is a transient alarm and should clear when the multicast input traffic rate reduces. Please check multicast traffic and alarm threshold configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-MAP_INFO_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Core dump failed because the target process information is not available with dumper. It is because of system call failure or memory shortage. Core file will be truncated.), (Recommended Action: Possible Work Around: If there was dumper malloc failure, try following command for failed process. 'show proc <failed_process_name> | include COPY' If it would produce something like following output, core: <other_option> COPY then dumper COPY option is enabled for this process and it temporary consume a lot of memory, so it might be one of the cause of the memory shortage problem. If that is the case, then specifing following command for failed process will reduce the temporal memory usage of the process, thus it might work around the problem. 'proc <failed_process_name> core <other_option>' Collect the following data and contact support. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_GET_NODE_TYPE
### Response:
(Severity: 3), (Category: OS), (Description: The system failed to get node type.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-ERR_TX_CONN
### Response:
(Severity: 6), (Category: FABRIC), (Description: Ingressq ASIC has 32 TX links into the fabric planes. This message lists the fabric planes that cannot be used by the Ingressq ASIC for data traffic.), (Recommended Action: If these fabric planes have not been installed, please ignore this message. If these fabric planes have been installed, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-4-CFG_SAVE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Configuration for a batch of interfaces could not be saved prior to the interfaces being deleted.), (Recommended Action: When these interfaces are re-created, re-enter desired configuration manually.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-6-EA_DLL_INFO
### Response:
(Severity: 6), (Category: L2), (Description: Debug messages for sonet ea edh dll.), (Recommended Action: No Action requirements.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_LIB_VCC-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: The system is low on memory and not enough was available to complete the request), (Recommended Action: Check the box for processes with excessive memory. If the problem persists collect the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SAMESYSID_DIFFHOST
### Response:
(Severity: 4), (Category: ROUTING), (Description: An LSP is received with a System ID same as the local System ID but with a different hostname. This could be happen in the following cases: 1) A new router is introduced into the network with a duplicate system ID as the local router. 2) The local hostname has changed and isis is receiving an old LSP generated with the old hostname.), (Recommended Action: If case 1, Check the configuration of other routers in the area for duplicate system IDs. If case 2, Ignore the message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: IP), (Description: The socket library (used by transports) failed to initialize a debug event.), (Recommended Action: The transport process will try to recover from this by retrying/ restarting. If the messages are not seen again, the problem was transitory and has been recovered. There is no need to take any action. If the messages come continuously, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-SATELLITE_CAPABILITIES
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered while attempting to retrieve capabilities for Satellites. CFM may fail to function correctly on the Satellites affected.), (Recommended Action: If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was otherwise triggered, then try restarting the CFM Daemon using the 'process restart cfmd location <node>' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-ACP_CHANNEL_TO_NBR_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'Autonomic Network Control Plane Channel has not been ' 'created to the neighbor'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_NETIO-3-DROPPED_PACKETS
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error has occured during packet handling in the VASI base capsulation, and no error counters can be updated. If errors are seen for an extended period then it can be assumed that no packets can be forwarded through VASI interfaces. This is likely to be a symptom of a problem in the Packet Forwarding Infrastructure - earlier error messages might indicate the root cause of the problem.), (Recommended Action: If the errors stop after a couple of minutes while traffic is still flowing through the VASI interfaces then it can be assumed that the problem has resolved itself. If the problem continues, then unconfiguring and reconfiguring the VASI interfaces could fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-7-ASMP_PCI_DETAILS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Details about the error observed on the PCI bus with Atlantis system controller.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_VRF-3-MAX_IMPORT_RTS
### Response:
(Severity: 3), (Category: ROUTING), (Description: The import RT is failed to be added to the vrf due to the maximum allowed number of import RTs for each vrf.), (Recommended Action: Review the import RTs of the vrf and try to reduce the number of import RTs for the vrf.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-3-SHELFMGR_EBUSY_RETRY
### Response:
(Severity: 3), (Category: INSTALL), (Description: Retry registration fixed number of times. Got EBUSY in registration with shelfmgr , retry if failed.), (Recommended Action: Please contact TAC after trying maximum retries.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_VLAN_SES_THRESHOLD_EXCEED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular VLAN on the given access interface has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-CF_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Compact Flash entity is removed from the RSP invmgr_agent deletes the CF data whenever it is removed.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_BA_INTR_PA_STALLED_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_BA_INTR_PA_STALLED interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-3-RSVP_TRACE_INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: RSVP could not initialize the event tracing module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What operations can IOS XR processes perform on the SysDB?
### Response:
IOS XR processes can perform the following operations on SysDB\n- Retrieve config and state data\n- Create, modify, and delete config data (for config-owning processes)\n- Register for notifications when data nodes are modified\n- Validate and reject config changes (for config-owning processes)\n- Store ephemeral and persistent state data\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB_IFSPECIFIC_CLIENT-6-ERR_DBG_FAILED
### Response:
(Severity: 6), (Category: SNMP), (Description: The operation requested could not be performed due to an internal error.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INFRA_TEST-7-SOLICITED_B
### Response:
(Severity: 7), (Category: TEST), (Description: A solicited message with an integer arg, a string arg, and an interface.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-CLDATA_ZERO_REFCOUNT
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB has reached zero refcount for clientdata. This indicates the accounting is incorrect.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR2_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-2 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_32
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV6_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Here is a list of possible reasons for this message (not all-inclusive). - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Resource limitations. This condition indicates a problem where the software has limited resources to operate on.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 show memory summary </RP> <LC> show cef ipv6 location <> show memory location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-2-ASIC_ERROR_THRESHOLD_CARD_SHUTDOWN_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Uncorrectable asic errors occured on card and board could not be shut down), (Recommended Action: ASIC errors that are uncorrectable have occured and exceed the threshold. Card could not be shut down because of some errors. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCDS-7-DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: Internal debugging message.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-NO_SA
### Response:
(Severity: 4), (Category: SECURITY), (Description: No security association exists for this packet and it is not an initial offer from the peer to establish one. These errors could imply denial of service attack.), (Recommended Action: 'Contact the remote peer and/or his administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMACTRLR-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified IMACTRLR Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-3-ARCHIVE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Transfer of RCMD report for archival purpose has failed.), (Recommended Action: This indicates that RCMD reports have not been archived in persistent storage. In the event of RCMD process restart along with RP FO/SO the information collected can be lost. The archival location configuration needs to be verified to be accessible and that sufficient storage space is available at the location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_LOF_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected OOF defect for incoming signal. For T1 mode OOF is declared when out of every four frame bits two or more frame bits are received in error. For E1 mode OOF is declared when three consecutive incorrect FAS is received. Also for E1 mode(CRC-4 framing) OOF can be declared when 915 or more CRC blocks out of 1000 are received in error. Additionally for E1 mode(CAS signalling) OOF can be declared when two consecutive multiframe alignment words are received in error or, for a period of one multiframe, all bits in timeslot 16 are zero.), (Recommended Action: 1) Ensure framing format on port matches framing format on the line. 2) Configure to other framing format to check if error clears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-6-IPV6_MTU_TOOSMALL
### Response:
(Severity: 6), (Category: INFRA), (Description: XLNCd is responsible for keeping the networking stacks for IOS-XR and Linux synchronized. It has observed that the MTU configured in IOS-XR has changed, and mirrored the new value into Linux, but that value is less than the minimum supported value for IPv6. The Linux kernel will automatically remove all IPv6 addresses from the interface, and will not re-add them when the MTU is raised, so they must be re-added manually.), (Recommended Action: Raise the MTU above the minimum value of 1280 required for IPv6, and re-add the MTU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_PER_INTERFACE_ROUTE_INTERFACE_THRESHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: This router has reached the threshold value for the number of states allowed to be received through the given interface. This is a warning that the maximum value is being approached and steps should be immediately taken to reduce the number of current states or to configure a higher maximum value.), (Recommended Action: Consider increasing the limit of states per interface, or decrease the current number of states for the given interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-DYING_GASP_USER
### Response:
(Severity: 3), (Category: SNMP), (Description: Dying gasp has been enabled on a host for which v3 user is not yet configured.For such hosts dying gasp trap cannot be generated.), (Recommended Action: Ignore if this message was seen on snmp startup. Or configure valid snmp v3 user.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-CHKPT_HW
### Response:
(Severity: 4), (Category: L2), (Description: The SPAN EA encountered an error while trying to recover hardware programming information based on checkpointed records. The records are used to ensure hardware resources are cleaned up correctly; if an error has been enountered then it is possible that traffic will continue to replicated from sources or to destinations on the affected node even after configuration has been removed. Standard forwarding will not be affected.), (Recommended Action: If it appears that traffic is being replicated incorrectly, then re-enabling, and then disabling traffic replication for the affected interface may help to resolve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-CHECKPOINT_NOSPACE
### Response:
(Severity: 3), (Category: OS), (Description: A QSM checkpoint record could not be placed in the checkpoint file due to insufficient heap space.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-4-ASSERT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The SRG process hits some abnormal condition. These warnings will not affect functionality of SRG.), (Recommended Action: Collect the traceback associated with this Log and contact the engineer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_AOF_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-3-GET_NODEID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: As shown in the message.), (Recommended Action: Please collect required_info log/trace and contact Cisco technical support representative with required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-3-INFRA_BLOB
### Response:
(Severity: 3), (Category: INSTALL), (Description: The Install infrastructure was unable to access some of the data that it requires, and so the requested operation may not be completed.), (Recommended Action: Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-MAX_NEIGHBORS
### Response:
(Severity: 4), (Category: ROUTING), (Description: Reached maximum number of neighbors supported.), (Recommended Action: Reduce the scale of peers attempting to establish sessions with this router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-MDB_PROFILE_INACTIVE
### Response:
(Severity: 2), (Category: FABRIC), (Description: hw-module profile npu native-mode-enable command needs to be configured, for hw-module profile mdb config to work.), (Recommended Action: Enable npu native mode to configure hw-module profile mdb command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-CIS_DATA_READ_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: CIS data read error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-APPLICATION_TRANSLATE_ERR
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered a data translation error. Client data is not updated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_SOFT_PREEMPTED
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface, with the specified LSP Id, has received a path \ error message and will be soft preempted.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-7-ERR_CHKPT_ITERATE_START
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID Allocator was unable to start to iterate checkpoint table. The fgid_allocator process may need restarting, if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-GET_MSGLEN
### Response:
(Severity: 7), (Category: HA), (Description: Extracting message or source message length failed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-ADD_KEY_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: IKE found failure when adding key), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-CHKPT_XFORM_INVALID_DIR
### Response:
(Severity: 3), (Category: ROUTING), (Description: The TE checkpoint table translation library was invoked with an invalid translation direction.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-6-VRF_DELETED
### Response:
(Severity: 6), (Category: IP), (Description: The administrator deleted a VRF or a specific addrses-family in a VRF.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GRID-4-BANK_MAX_CLIENT
### Response:
(Severity: 4), (Category: L2), (Description: All the network resources associated with this BANK have been completely exhausted and display client using highest rids of the bank.), (Recommended Action: The network operator could try and reduce the clients using high rids in the bank which would free up the rids. For eg. 1. If the GLIF bank 1 is full, mpls_lsd client is highest consumer. reduce the scale of mpls_lsd client labels.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-7-PFI_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the PFI-IFH module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBQOSMIB-3-MUTEX
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble locking/unlocking mutex.), (Recommended Action: Collect information as in required_info. Collect running core dump via cli 'dumpcore running mibd_interface', and contact TAC. Then restart the process via cli 'process restart mibd_interface')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_CREATE_THREAD
### Response:
(Severity: 3), (Category: MGBL), (Description: 'pthread_create() API failed due to mentioned error'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_MAP
### Response:
(Severity: 7), (Category: MGBL), (Description: Mapping calender chip address to process address space.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-5-CARD_INSERTED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Given card has been inserted into the chassis.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_BA_INTR_QUEUE_LEN_URUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_BA_INTR_QUEUE_LEN_URUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-ERR_MEMBER_ADD
### Response:
(Severity: 3), (Category: L2), (Description: Could not find the bundle interface with the nodeid and group. Hence cannot add the member interface to bundle.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please collect the required_info and contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA-3-RTINSERT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A radix tree internal error occured while inserting in MPA multicast database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-DISTRIB_SEND_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The SLA Profile Manager has failed to resync the configured profiles with its clients after one minute of retrying. Further retries will be attempted every 30 seconds. Until the clients become resynced with the SLA Profile Manager any recent additions or changes to profile configuration will not be acted upon.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-MTU_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: The E-LMI specification assumes that the MTU of the media that it is running over is exactly 1500 bytes. However, the protocol can run on lower values than this so long as the MTU is large enough to include a header, the report type IE, the sequence numbers IE, the data instance IE and a maximum length UNI IE. The message has been issued because the configured MTU is too small to meet this condition. The protocol will continue to run assuming that the MTU is this minimal required value and so may not operate correctly.), (Recommended Action: Reconfigure the interface's MTU to a larger value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_0_OUTPUT_SQUELCHED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in 2MHz and 6.312MHz modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-6-SENDTO
### Response:
(Severity: 6), (Category: L2), (Description: The socket call to send a control packet timed out.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. A Socket level error, nothing to be done.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-NO_SATELLITE_AVAILABLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The received and parsed GPS TOD message frame from external equipment indicates no satellite availablity, which could possibly indicate that the time-of-day received is not synchronized to a UTC/TAI timescale.), (Recommended Action: 1) Ensure GPS receiver connectivity on the external equipment.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-INSTALL_CRITICAL_AUTO_ABORT
### Response:
(Severity: 2), (Category: INSTALL), (Description: The install operation will abort in the given time unless the user starts either the accept phase or the complete phase using the supplied instructions. The critical version is shown if the abort timer has less than 30 minutes left on it.), (Recommended Action: Please take necessery actions as per the supplied instructions. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-ERR_MULTICAST_ADDR_SET
### Response:
(Severity: 4), (Category: L2), (Description: The driver returned an error while setting up the CDP multicast address. It is possible that CDP packets will be dropped and not reach the CDP process.), (Recommended Action: If CDP packet loss is seen then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-7-IO_FAIL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Failed to read or write to the specified file, which is required to proceed further. The current request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-4-ERR_LTRACE_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: The NPU driver could not open/initialize the ltrace buffer. The NPU driver and the system should stll function as normal, with the exception that ltrace will not be available for npu_drvr process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIV2_DM-3-INFO
### Response:
(Severity: 3), (Category: L2), (Description: Driver manager encountered an error that would lead to degraded service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_LOCSW-7-INIT_WARNING
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the LOCSW module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-BD_BATCH_DELETE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: Following a configuration change, CFM no longer needs to retain information about some bridge domains but has failed to delete the information from its database. The process will continue to operate correctly but is using more memory than is necessary.), (Recommended Action: No specific action is needed, though the warning could be a sign of low memory conditions. If other memory issues are seen, resolve those first and then reapply the configuration change.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-MUTEX_ISSUE
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR2_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-2 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_EVM_CONN_OPEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-TE_UNSUPPORTED_TRANSITION
### Response:
(Severity: 2), (Category: ROUTING), (Description: In label update, unsupported transition to tunnel label.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-SPAN_FILE_WRITE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error was encountered while writing to the SPAN file.), (Recommended Action: This problem may indicate there was an issue with writing to file. You can try the operation again. If problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-4-WARN_ERR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an severe error message in the DPA module to indicate that an error was seen during init operation.), (Recommended Action: Please collect the console log, DPA traces (show dpa trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE2_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE2_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_ETH_MGMT-3-DEBUG_REG_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error detected when registring the eth mgmt debug messages. process will restart automatically to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM_SERVER-3-SHMWIN_LOCK_DAMAGED
### Response:
(Severity: 3), (Category: L2), (Description: The shared memory window lock, used by the primtive resource manager process, is corrupted. All particpant processes in the shared memory window are restarted to recover the system.), (Recommended Action: The linecard may need to be reloaded if it starts showing persist error log messages.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-L2VPN_RD_LOCAL_AND_REMOTE
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected that the RD is marked both local and remote This means that the local table_ctx points to this rdinfo but this rdinfo points to the shared tabel_ctx), (Recommended Action: This msg is info only. At this point BGP and L2VPN will be out of sync Need process restart to achive sync)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_LOSS_OF_SYNC_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on NPU-1 interface on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_NETIO-3-PARSER_NULL_PATH
### Response:
(Severity: 3), (Category: L2), (Description: The path to atm_netio.rules file cannot be located.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-ISSU_OP_ABORT_DSC_SWITCHOVER
### Response:
(Severity: 2), (Category: INSTALL), (Description: During ISSU operation, a dSC switchover occurred unexpectedly thus the current ISSU operation is aborted.), (Recommended Action: Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-4-IPACCESSUNSUPPORTED
### Response:
(Severity: 4), (Category: ACL), (Description: An access list that contains object-groups in one of its entries was specified. At this time ACLs with object-groups are supported only for packet filtering. I.e., attached to an interface.), (Recommended Action: Specify an access list that does not specify any object group in any of its entries.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ERR_RCV_PAKTYPE_NOT_P2P
### Response:
(Severity: 6), (Category: ROUTING), (Description: The packet is invalid because it is a LAN packet received on a P2P interface. The packet has been ignored.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-SETSOCKOPT_NOPROTOOPT
### Response:
(Severity: 6), (Category: IP), (Description: An error occurred whilst trying to setsockopt on the socket. Session will continue.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-GOLDXR_GENERAL
### Response:
(Severity: 6), (Category: DIAG), (Description: GOLD-XR general information.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-3-IDB_NOT_FOUND
### Response:
(Severity: 3), (Category: L2), (Description: The software forwarding support for IEEE802.1Q VLANs was unable to process a message sent to a particular interface because the interface does not exist in NetIO. Software forwarding VLAN functionality on the affected interface may be impaired. The interface can be determined from its handle with <CmdBold>show im chains ifhandle [handle]<noCmdBold>.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-PORT_CONTROL_ADD_CLIENT_SUCCESS
### Response:
(Severity: 5), (Category: L2), (Description: Port Access is allowed for the client.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_FSDB_FADB_LTRACE-3-ERROR_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FSDB FADB ltrace lib failed to initialize the error ltrace), (Recommended Action: Search the event logs for events/errors related to the failure reason. Ltrace usage is common to overall system. If there are failures here then other processes may also exhibit similar problems. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-PAK_SEND_TO_TRANSPORT_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv6_IO attempted to write a packet to the transport layer and failed.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-XFP_HOTSWAP_PERSIST
### Response:
(Severity: 3), (Category: L2), (Description: The inserted XFP failed to power on correctly.), (Recommended Action: Replace the XFP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-CHECKPOINT_CANT_RELOAD_NOTIFY
### Response:
(Severity: 3), (Category: OS), (Description: A link found in the checkpoint file could not be created in the QSM database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LIC_MGR-3-LISTENER_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A component registered for platform mode notifications and the listener failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-SW_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The PLIM process failed to spawn due to an internal software problem during the initialization process. The process will automatically respawn up to a fixed number of times to try and recover. The PLIM process is the driver for all PLIM hardware devices. %s - indicates the reason for the failure.), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error is normally associated with larger system issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_LIB-3-FAILURE_TO_BIND_TO_SYSDB
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The platform library service call to bind to system database module has failed. The calling application handles it appropriately.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-BUNDLE_FSV_REGISTER_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS failed to register with packet manager for FSV area. It only affects the algorithm used to pick a bundle member. If no bundles are configured for ISIS - this error can be ignored.), (Recommended Action: If the error was seen when a> packet process is restarting, then restarting NetIO will help recover from it {or} b> If the error is seen in normal conditions it indicates that packet process for some reason is not able to handle the FSV registration request. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show tech-support pfi all show process packet location <> show process netio location <> show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-FILE_VERSION_MISMATCH
### Response:
(Severity: 7), (Category: OS), (Description: A file has invalid version than expected.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-6-OPEN_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: SHMWIN encountered an error condition, the shm open failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin trace all location 0/x/CPUx - Check that the path exists with 'run ls -l <pathname>' from the shell)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-MSG_READ
### Response:
(Severity: 7), (Category: HA), (Description: A msg_read call in the message handler failed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-ERR_ASIC_GENERIC
### Response:
(Severity: 1), (Category: FABRIC), (Description: Ingressq encountered a device error that has exceeded its threshold value. Driver takes appropriate action to log and fix the error which may include a device reset.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-ARB_SERDES_0_FAIL_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Arbitration serdes link 0 failure on FIA 1.), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SL-7-INIT_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This log indicates that Service Logger was not able to initialize. As result of this error, Service Logger will not log be able to log data in the log file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-ERR_ASIC_MBE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Ingressq encountered a multiple bit error in the mentioned block. This error is an uncorrectable error. Driver takes appropriate action to log and fix the error which may include a device reset.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-MSG_ATTACH_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to attach handler for sync events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-0-CARD_OVERTEMP_SHUTDOWN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Card temperature has risen at or over shutdown threshold. Card shutdown commencing.), (Recommended Action: Verify the failure, give CLI: (admin)# show env --> particularly temperature and fan output (admin)# show env trace Card is put in IN-RESET state, use CLI: to bring card back into service, or a manual unplug / replug of the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE_MAIN-3-DLL_OPEN_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'Process failed in opening dll.' 'ISSU operation will continue without any error.'), (Recommended Action: 'ISSU manager will retry opening dll after sometime.' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMP-3-CONFIG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Crypto Configuration (SAs/ACLs) failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-FAILED_CALL_PLATFORM_RELOAD_NODES_ALL
### Response:
(Severity: 4), (Category: INSTALL), (Description: The Install Manager called the platform API to reload all nodes in order to complete the parallel install operation. The platform call failed, so the dSC is going to be reloaded directly which will trigger a router reload), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-UNKNOWN_BOARD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the board type cannot be recognized, therefore, the node will not be able to boot up. This may be caused by an invalid eeprom content; or happens in a rare corner case which may recover after a board reset.), (Recommended Action: Two possibilities to this message. 1) The board boots up after resets : *None* 2) The board does not boot up after resets : Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FSMTIMEOUTMDR_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is not able to boot up after a warm reload. If an MDR-mbi-hello is not recieved within a specified time limit, then the node will go to ENA-FAILURE.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_PROC_ABORT_REQUEST
### Response:
(Severity: 1), (Category: INSTALL), (Description: ISSU operation aborted due to the named process requesting an abort on the given node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The reason for this issu operation failure has to be analyzed. Collect 'show tech-support issu' and forward the logs to the TAC. In addition, 'show tech-support' should be gathered for the process which requested the abort where possible. These logs should also be forwarded to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-APIERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A lower-level support function returned an unexpected status.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-TM_CLUSTER_PARITY
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-3-MSG_PROCESSING_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: TCP was unable to process an SSO related message. This is likely a transient condition or an ignorable error.), (Recommended Action: The process may attempt to recover from this situation by retrying the operation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-PAK_FROM_NETIO_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS was not able to process a packet from NetIO successfully and hence dropped the packet.), (Recommended Action: This message could be seen under low packet memory conditions and should recover once packet memory becomes available to CLNS. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_SYSMGR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error communicating with Sysmgr. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary initialization problem, but the error could also be caused by programming error.), (Recommended Action: In most cases, PPPoE MA will not be able to recover, so will shutdown. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. *SUPPORT*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the nsf cisco command in IS-IS?
### Response:
The nsf cisco command is used to enable Cisco-proprietary Non-Stop Forwarding (NSF) for IS-IS. NSF allows the router to continue forwarding traffic during a supervisor switchover or a software upgrade. It requires the router to maintain its forwarding table and to synchronize its database with neighboring routers after the switchover or upgrade.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR3_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-3 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TEJAS_DRV-2-CRITICAL_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The message is used to report TEJAS DRIVER critical errors.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ temperature greater than or equal to the high temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-SHIP_INITFAIL
### Response:
(Severity: 7), (Category: SERVICES), (Description: A failure occurred during the initialization of the debug statistics.), (Recommended Action: Debug statistics are used to debug cgn_ma in case of functionality issues. This will not impact CGN_MA in any form.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENV_AGT_DLL-3-MSG_EP_PWRSEQ_PROGRAM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: LDA sends this message to envagt to program the power sequencer of EP when it detects the EP power up failure.), (Recommended Action: Provide the following CLI to collect the LDA/env_agt trace: show controllers lda trace location <tatget location> (admin)# show env trace pwrseq)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-6-INFO_DUPADDR
### Response:
(Severity: 6), (Category: IP), (Description: A peer device is configured with the same interface IP address.), (Recommended Action: Change the interface IP address of one of the two devices.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-3-HOST_MODE_VIOLATION
### Response:
(Severity: 3), (Category: L2), (Description: Only one auth client is expected in (Single/Multi) Host mode), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-5-PEER_STATE_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: An PCE peer has changed state. This message appears only if the <Bold>pce logging events peer-status<NoBold> command is configured for the PCE.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV6_EA-3-CRITICAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX IP-EA, Critical error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-3-OLD_FIRMWARE
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The PSU has old firmware.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCDMA-3-ERR_BAG_REG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: EDM Bags are used to share information between components using sysdb. This Error indicates that bag registration failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key components of an RPL policy in IOS XR?
### Response:
The key components are: 1) Route policy: The top-level construct that defines the policy. 2) Prefix set: Defines a set of prefixes for matching the route's Network Layer Reachability Information (NLRI). 3) AS path set: Defines a set of AS path regular expressions for matching the route's AS path attribute. 4) Community set: Defines a set of BGP communities for matching or setting the route's community attribute. 5) Policy statement: Defines a sequence of actions to take if the route matches the specified conditions.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-STATS_CLEAR_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The SPAN MA was unable to clear statistics for the specified source interface. The SPAN MA would normally clear statistics at the point at which a source interface is removed from a session. Traffic replication will continue to operate as normal, but statistics relating to traffic replicated while the interface was in the session it has just been removed from will persist until they are manually cleared.), (Recommended Action: The source interface counters can be cleared by running 'clear monitor-session counters'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-PROCESS_EXHAUSTED
### Response:
(Severity: 3), (Category: OS), (Description: Exhausted all instances of placeable process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC_CTRL-6-RACK_STATE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: One rack of the cluster system has entered or exited the cluster. Up state is normal for a rack in the cluster. Down could indicate a rack level reboot, or a connectivity issue between the racks.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-DAEMON_ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while creating the process event manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-1-AUTO_RECOVERY
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This error message indicates that the driver process is unresponsive. All retries have been exhausted. Auto-recovery action involves either restart of the process or reload of the node which may lead to some traffic loss. For debugging this error, a voluntary running core file will be generated before the auto-recovery action.), (Recommended Action: Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-STBY_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize acctd on standby node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_INTF_CLEARED
### Response:
(Severity: 4), (Category: OS), (Description: An interface that was previously flagged by the punt flow trap has been removed from the 'penalty box.'), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel mesh affinity feature?
### Response:
The MPLS TE auto-tunnel mesh affinity feature allows auto-tunnel mesh tunnels to select or avoid links for the mesh paths based on configured affinity attributes. This provides more control over the mesh path selection compared to the default behavior of using the TE metric. Affinities allow mesh paths to be optimized for specific requirements.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_OPM-4-CANNOT_SYNC
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An ICCP redundancy group which is being used for satellite multi-chassis redundancy could not be synchronized due to the error stated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_EVM_TM_LEAF_NEW
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to create a timer tree leaf object.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp nsr' command in Cisco IOS XR?
### Response:
The 'mpls ldp nsr' command enables the LDP Non-Stop Routing (NSR) feature. LDP NSR provides the ability to maintain LDP bindings and continue forwarding MPLS traffic during an RP switchover. It ensures minimal traffic loss during RP failover by synchronizing the LDP state between the active and standby RPs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-FPD_IMG_CORRUPTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An FPD image in non-volatile memory is corrupted or missing. Each FPD has 2 images stored in non-volatile memory, one is field upgradable version; the 'B' version. The other is the backup version; the 'A' version. If a B version FPD image has gone bad, it can be recovered by following the recommended_action. If the A version has gone bad, the board must be replaced.), (Recommended Action: Use the following command to find out which FPD image is bad/missing: 'show log | inc PFM | inc FPD'; If it is the B version (the upgradable version), then reprogram the image using the upgrade command: 'admin' 'upgrade hw fpd <fpga-selection> force location <node-failed>' If any A version is bad, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-7-SYSDB_BIND
### Response:
(Severity: 7), (Category: OS), (Description: Procfind was unable to bind to the SysDB server, and therefore failed to initialize.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-RCC_NO_TABLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred that prevented the FIB from completing the route check.), (Recommended Action: Try restarting the FIB process to see if the route gets programmed again. LC OIR or clear route * can be tried as well. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-7-SYSDB_INFO
### Response:
(Severity: 7), (Category: SNMP), (Description: This is an information system log providing sysdb information. It will provide you sysdb interface name and sonet path structure interface name.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred at system initialization time.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlea-4-EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN EA process encountered an error while listening for events. The process will automatically restart and retry.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-USER_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the user has requested to reload the node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_NETIO-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during an initialization operation in the PPP NetIO DLL. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user. One possible reason for the error is a low memory condition, particularly if the failure was in allocating trace buffers.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How are configuration failures handled during router startup in IOS XR?
### Response:
During router startup, if there are configuration failures, IOS XR boots with the last known good configuration instead of the latest changes. This ensures that the system comes up in a consistent state even if recent configuration changes caused issues.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXMGR-3-INTR_MASKED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCIE interrupts masked due to large errors), (Recommended Action: This error is a momentary error and software should be able to correct it. No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_RESYNC_TIMEOUT
### Response:
(Severity: 3), (Category: FABRIC), (Description: When FSDB starts up it attempts to resynchronise the state with all current entities. This message indicates that one or more of these entities has not responded within the timeout period. This could lead to FSDB having an inconsistent view of the fabric, and can potentially cause traffic loss.), (Recommended Action: Restarting FSDB process on any racks suffering from traffic loss may help, if not, restart FSDBs on all racks might resolve the issue. 'admin process restart fsdb_server location <loc>' Since 'restart process' is a disruptive operation and all the previous state is lost, all the logs for the commands mentioned in required_info should be saved. If problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-SPA_REMOVE
### Response:
(Severity: 3), (Category: L2), (Description: This message indicates an error on spa bus for which internal recovery action (i.e., SPA reset) has been initiated.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_USAGE
### Response:
(Severity: 3), (Category: IP), (Description: Usage error.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-PROC_READY_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This is a fatal error which will slow down system intialization following boot or a failover event. The process will restart in an attempt to clear the error.), (Recommended Action: If the error message indicates a potential out of memory condition Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Otherwise, this indicates a problem with the sysmgr infra, Gather 'show tech-support sysmgr'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-TX_CH_LO_PWR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low power on a channel. The channel may not be functioning properly, and can cause cell drops, or corruption in the downstream. This is a precursor to the Tx LOS.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the main components of the Cisco IOS XR microkernel architecture?
### Response:
The main components of the Cisco IOS XR microkernel architecture are\n- Microkernel: Provides minimal OS services like scheduling, memory management, and IPC\n- OS processes: Includes process manager, IPC services, and device drivers\n- Restartable processes: Includes routing protocols, management, forwarding processes\n- IPC message passing bus: Enables communication between microkernel and processes\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-SHUTDOWN_DISABLED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: NP shutdown action is disabled. The network processor is in an unknown state and may not be operational.), (Recommended Action: Unless disabling NP shutdown was intentional, NP shutdown must always be enabled on a production node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTT0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP interface priorities in Cisco IOS XR?
### Response:
To configure RSVP interface priorities, use the 'rsvp interface' command followed by 'priority' in interface configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-rsvp-if)#priority 3 3
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_BAT_FAIL_A
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Battery Failure A (SAT_BAT_FAIL_A) alarm is raised when the battery A fails. This could be because the battery is removed or is not operational.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-LTRACE_OPEN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Due to an error in the ltrace initialization routines, the init failed. This may be due to other problems on the system (is ltrace running?).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-CHUNKCREATEFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Could not allocate a chunk of memory for the packet headers.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-PM_DATA_FAILED
### Response:
(Severity: 3), (Category: SNMP), (Description: A problem occurred while fetching data from pmengine for port and path. first %s - Determine PM_DATA failed at port or path second %s - Reason of failure), (Recommended Action: Check for memory usage, this is a very corner case and collect required info as well.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_BAD_SEQ_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The sequence number in the received PBU is not the one that's expected.), (Recommended Action: Note the NAI of the MN from the error message. Clear the binding using the following command. Check if the error goes away after receiving a new PBU after the binding is cleared. <CmdBold> clear ipv6 mobile pmipv6 lma binding nai <NAI> <NoCmdBold> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: The server has failed to acquire the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP MED attribute?
### Response:
The multi-exit discriminator (MED) is an optional attribute that suggests to an external AS the preferred path into the local AS when there are multiple entry points. A lower MED is preferred.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-NOTIFY_UNREGISTER_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: A application requested database un-notification could not be removed from the QSM notification database. An error will be returned to the client process.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-MISSING_HNP_OPTION
### Response:
(Severity: 3), (Category: IP), (Description: HNP option is not received in the PBU. This happens if the service configured for the MN on the LMA is IPv6 or Dual and that on the MAG is not matching.), (Recommended Action: Note the CoA address, IMSI (if available) and NAI from the error message. Run the following command on the MAG that corresponds to the above CoA address or IMSI. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config | section mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config | section mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the service type of the MN or Logical-MN (corresponding to the NAI noted above) under domain configuration and Logical-MN configuration. Run the following command on the LMA. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config ipv6 mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config ipv6 mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the service type of the MN or Logical-MN (corresponding to the NAI noted above) under domain configuration. If the service type configired on the MAG and the LMA is not the same, reconfigure matching service type on the MAG and/or the LMA. If the issue persists, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_SSUB
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from SSUB.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_UV-3-SYSMGR
### Response:
(Severity: 3), (Category: L2), (Description: The process was initialized successfully but was unable to inform System Manager of the success. This should not occur more than once as the process should restart itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-TX_ALARM_TPDV
### Response:
(Severity: 3), (Category: PLATFORM), (Description: In T1 mode TPDV alarm is raised when the transmit data stream does not meet ANSI T1.403 requirements for transmit pulse density.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-MAC_MOBILITY_SEQ_NUM_WRAPPED
### Response:
(Severity: 3), (Category: L2), (Description: EVPN MAC mobility sequence number wrapped indicator.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-REFBW_CHG
### Response:
(Severity: 6), (Category: ROUTING), (Description: Informational message reminding the user that reference bandwidth should be consistent across all routers in the area.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-STATUS_MUTEX_LOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver was unable to lock the status variable for the interrupt thread.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-OPEN_OR_DUP_DEVICE
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to open or duplicate the device file that exec requires for read/write operations.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_CPU_DATA_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EBS to CPU packet data single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FTI-3-XML_ERR_MSG
### Response:
(Severity: 3), (Category: INFRA), (Description: XML error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-PTHREAD_MUTEX_UNLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-INFO
### Response:
(Severity: 6), (Category: FABRIC), (Description: Just for information. Message is self explanatory.), (Recommended Action: No user action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-CRYPTO_DEACT
### Response:
(Severity: 3), (Category: MGBL), (Description: The crypto pie is deactived or removed while http server is running in ssl mode.), (Recommended Action: Unconfigure http server or configure it to run in non-ssl)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-KERNEL
### Response:
(Severity: 3), (Category: MGBL), (Description: The RS232 driver has made a kernel call which is failing; it cannot proceed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-5-RSVP_TE_TUNNEL_BURST_INTERVAL_STRETCHING_INACTIVE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The condition triggering the RSVP_TE_TUNNEL_BURST_INTERVAL_STRECTHING_ACTIVE syslog has been cleared. RSVP-TE Tunnel delay measurement sessions now run using their configured burst interval.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-EVENT_FAIL
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license manager encountered an error condition while processing an event. Check the error string to determine what has happened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CETHHA-2-CRITICAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Hardware error on CPU control ethernet port.), (Recommended Action: Remove/Replace the RP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the PSE Driver to indicate an operation or condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-BM_DEAD_NODE_RECOVERY_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: We were unable to recovery from dead node state. We attempted 3 times, but dead node clearning recovery is failing.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC18
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_DATALIST
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-7-DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: Debugging messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-INTERNAL_STATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured due to inconsistent internal state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp statistics peer<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp statistics peer<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_6_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: A failure occurred during the process startup of the firewall controller. This is most likely caused by a failure of some piece of infrastructure used by the firewall controller. The error message may give an indication of the root cause of the failure.), (Recommended Action: The process will be restarted by the System Manager - no further action is necessary. If the problem occurs repeatedly, copy the error message and gather the other necessary information, and call you Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_SYSMGR_MON_LIB-3-SYSMGR_HB_SEND_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: Vm-monitor is not able send heartbeat message to sysmgr.), (Recommended Action: This indicates an problem with communication with sysmgr process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-MUTEX_REVIVED
### Response:
(Severity: 3), (Category: L2), (Description: The PIRD database uses a number of shared-memory locks to protect against concurrent access by clients. A client process died whilst holding one of these locks, and it was forcibly recovered. This may have resulted in an internal inconsistency which could cause other problems.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-DATAARRAYLENGTH
### Response:
(Severity: 4), (Category: MGBL), (Description: The number of elements entered for a data array does not match the expected value.), (Recommended Action: Use the classinfo command to get more information about the naming or value information of a class. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-3-CACHE_REQ
### Response:
(Severity: 3), (Category: L2), (Description: Caching request can not be serviced due to the indicated reason.), (Recommended Action: None. System will continue to function without caching.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-SHMWIN_INIT_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize shared memory window), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-UPDATE_ERR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate problem that happened during an update event. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_RRW_UNLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to release rrw lock to the request record area in shared memory. This is a fatal error, the process will automatically restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-CONN_FAIL
### Response:
(Severity: 3), (Category: DIAG), (Description: Diagnostics software has received a packet from a client, but the client is not connected to the server. Another component may have restarted causing the connection to be broken. This is not a service impacting error.), (Recommended Action: Check the log ('show logging') to see if any processes have restarted or to determine if there are any other related error messages. Also, please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area or of any processes found to have restarted. Copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Also collect the information from the 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_16
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-BADLSA
### Response:
(Severity: 4), (Category: ROUTING), (Description: The router received an invalid LSA. The cause is either memory corruption or unexpected behavior on a router.), (Recommended Action: Check both the sending and receiving routers for memory corruption. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR1_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-1 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-FIT_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot initialize the FIT library. User will not be able to induce errors via FIT tool.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_ATOMIC_RING_OP
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while performing an atomic ring operation. This may be due to resource starvation or an internal software programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-SYSDB_SET
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-7-CBC_PRE_RESET_NOTIFICATION
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Informational log only), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-4-INV_PKT_FIELD
### Response:
(Severity: 4), (Category: L2), (Description: A packet containing an invalid field was detected in a batch passed to the PIRD plug-in or fabric header library.), (Recommended Action: If any problems are seen, they may be rectified by restarting the affected process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_LPTS-3-UNALLOCATED_FREE
### Response:
(Severity: 3), (Category: FABRIC), (Description: A software error occurred, when the PA attempted to free unknown FGID), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-3-SHM_OPEN
### Response:
(Severity: 3), (Category: OS), (Description: The open() failed in mmap_peer_local.), (Recommended Action: Copy the message exactly as it appears, and report it your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-7-TREE_OP_ERR
### Response:
(Severity: 7), (Category: ROUTING), (Description: A tree operation failed.), (Recommended Action: This message is informational.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_CIRC_TYPE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Bad circuit type (CIRCUIT-TYPE) from SOURCE_IF. This system received an IS-IS hello with a header reporting an invalid circuit type of CIRCUIT-TYPE. This is the result of a mal-formed packet rather than a configuration error. The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-PTHREAD_MUTEX_LOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA-driver Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-INFO_SHOW
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-5-SATELLITE_FABRIC_MESSAGE_RECEIVED
### Response:
(Severity: 5), (Category: L2), (Description: A notification message has been received from a Satellite regarding the operational status of CFM on Satellite fabric links.), (Recommended Action: Depending on the content of the notification message, it may be necessary to adjust the CFM Satellite fabric link configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-IMDR_EOC_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: A problem was encountered while trying initialize with the IMDR EOC library. This library is used during IMDR to keep track of the client requests to Ingressq and to determine when to notify the imdr process that all client requests have been received. If the ISSU/IMDR upgrade is in progress, the upgrade may not complete sucessfully. If the ISSU/ IMDR action is not in progress, the initialization will not complete until such time as a IMDR EOC library initialization completes sucessfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FT_FAN_AIRFLOW_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when fan trays of different airflow (suction or exhaust) are present on satellite.), (Recommended Action: Please use fan trays with same air flow type on satellite. i.e. either suction or exhaust.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: This is a debug message in the NPU Driver to indicate an operation or condition.), (Recommended Action: Collect the console logs 'sh logging' Traceback data. npu_driver_driver core file, if generated. 'show asic-errors all location <>' 'asic-errors dump pse <asic instance no> location <>' 'show asic-errors pse trace all location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-USING_OLD_RTRID
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPFv3 failed while attempting to allocate a router ID from the IPv4 address of one of its interfaces due to an unexpected internal problem.), (Recommended Action: Use 'clear ospfv3 process' to force another attempt to find a valid router ID. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-5-INVALID_PUNT_TYPE
### Response:
(Severity: 5), (Category: OS), (Description: The punt packet type information is not valid.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPMgr-3-CONSTRUCT_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error in fault profile mgr construction failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_EA-3-SSC_SEND_SRV
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a single message to the Service Director. The Service Director may not be up to date with the state of this services on this node, so the associated InterFlex interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the InterFlex EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-3-DEBUG_REGISTER_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when registering with the debug library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-BPDU_UNREADABLE
### Response:
(Severity: 3), (Category: L2), (Description: STP received a BPDU but was unable to read the contents via a call to the Ethernet Packet Infrastructure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGEDM-3-UNREGISTER
### Response:
(Severity: 3), (Category: MGBL), (Description: Failing to unregister the edm.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-DIAG_STOPPED
### Response:
(Severity: 6), (Category: DIAG), (Description: Diagnostic test has stopped.), (Recommended Action: Nothing. This is an informational message stating that diagnostic testing has been stopped. If you want the test to run to completion, rerun the test.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD-3-NOMEM
### Response:
(Severity: 3), (Category: SERVICES), (Description: There are insufficient resources to perform some action. The error message contains more details about what action failed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Once the memory conditions have been improved, restart the Service Role Daemon process to allow it to resynchronise with its clients.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHEMA-6-VERSIONCHANGE
### Response:
(Severity: 6), (Category: MGBL), (Description: The version of some part(s) of the schema which are running on the router have changed - this is an informational message to let any users of the schema know of the change.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PA_INTR_UCFF_UDR_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PA_INTR_UCFF_UDR_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVC_OPEN
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-EXEC
### Response:
(Severity: 3), (Category: MGBL), (Description: The Exec launcher failed to exec 'exec'. This could be due to an error picking up the load path from install manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-BAD_MSGLEN
### Response:
(Severity: 7), (Category: HA), (Description: The source message length is less than the message length. This is a situation which should never happen.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-PDMA_QUEUE_RX_STOP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicated device stop process the incoming packets in the receiving queue, while there is still packets in the pdma queue. %s: device name %d: queue number %s: client name), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLUSTER_UPGRADE-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message from the Cluster Upgrade Engine), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-CNET_RELAY_OP_NCK
### Response:
(Severity: 6), (Category: PLATFORM), (Description: attach: LC disconnects the connection. %s- Message description. %d- Reason for the failure.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-STBY_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize locald on standby node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-CONFIGFAIL
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to perform the indicated configuration operation. This could be due to a low memory condition, an unsane configuration, or an internal software error. Failed in Host config: Received a good tuple for the snmp-server host CLI command, but could not configure it. This is likely due to lack of memory, which may be a transient condition, or may be due to SNMP supporting too many MIBS with large amounts of data. Try this command again after a few minutes. If it continues to fail, you may wish to undo some SNMP configurations and then retry the command.), (Recommended Action: Examine the configuration and ensure that it is sane. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *SH_CMD config*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_OFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 1 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-MASA_AUTH_TOKEN_PARSE_ERROR
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'Encountered error while parsing the authentication token ' 'response string from MASA server'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different SysDB planes and what is their purpose?
### Response:
SysDB is organized into different planes based on the scope and persistence of data\n- Admin plane: Contains config and state data that is available across the system. It is persistent between reloads.\n- Shared plane: Contains config and state specific to a card type (RP, LC) but shared between cards. It is persistent.\n- Local plane: Contains non-persistent state, statistics, and diagnostic data specific to a node.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-ERR_INIT
### Response:
(Severity: 1), (Category: FABRIC), (Description: The Ingressq driver failed to initialize the device resulting in the restart of the Ingressq driver process.), (Recommended Action: Collect all the event logs and the output of the following command executed from the CLI of the active RP: 'show process ingressq' Also, collect the fabric snapshot: 'show fabric-snapshot file <> loc <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-TEMPLATE_APPLY_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: The RS232 DLL tried to apply a template to a TTY but failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-CPLD_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The Fabric PLD power fault alarm was encountered), (Recommended Action: A power fault has occurred.If the fault has occurred, node will be shutdown. Please collect logs mentioned in required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-IDB
### Response:
(Severity: 3), (Category: L2), (Description: Unexpected error on Interface Descriptor Block), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ERR_CREATE_SERVER_ENTRY
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-7-script_spawn
### Response:
(Severity: 7), (Category: OS), (Description: Start/Complete spawning a script), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-CHECKPOINT_REG_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: On going primary active, checkpoint table registration failed. The protocol process has been restarted to attempt to recover.), (Recommended Action: If the protocol process starts up successfully, then no further action is required. If repeated restarts are seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-BAD_INSTDB_FORMAT
### Response:
(Severity: 7), (Category: INSTALL), (Description: INSTDB file is in an obsolete format or is unknown.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMONMIB-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble allocating memory.), (Recommended Action: Please collect 'show memory summary', 'top' and 'show tech-support performance-traffic' and contact Cisco technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-5-EVAL_START
### Response:
(Severity: 5), (Category: LICENSE), (Description: Either customer allocate entitlement prior to registration or customer registration has expired. The device is now de-registered and is in evaluation mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-CHILD_TERMINATED
### Response:
(Severity: 3), (Category: MGBL), (Description: A child process received a signal and terminated abnormally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TRANSPORTAIPC-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize or shutdown the debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-BAD_NCTDELETE
### Response:
(Severity: 7), (Category: HA), (Description: Bad NCT record is being freed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_INVALID_CARD_TYPE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric cards bitmap capacity cannot be determined because platform_node_get_card_type returned an unrecognized card type.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-ASICS_NOT_RELEASED_FROM_RESET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: ASICS not out of reset.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is Virtual Private LAN Service (VPLS) and how is it configured in Cisco IOS XR?
### Response:
VPLS is a multipoint-to-multipoint L2VPN service that provides Ethernet-based Layer 2 connectivity between multiple customer sites, emulating a LAN segment. It is configured using the 'l2vpn' configuration mode. The 'bridge group' command is used to define a VPLS instance and the 'bridge-domain' command is used to specify the VPLS domain. The 'vfi' command is used to define the virtual forwarding instance and the 'neighbor' command is used to specify the remote PE routers participating in the VPLS service.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-BRM_INVALID_INPUT
### Response:
(Severity: 4), (Category: FABRIC), (Description: There might be a fabric disconnect in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_CID_SES_THRESHOLD_EXCEED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-6-HBM_LANE_REPAIR_SUCCESS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an message in the SBUS Driver to indicate that the lane repair operation has succeded on the specified HBM memory), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENTITYMIB-3-INIT_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: A failure occured during the initialization of the process.), (Recommended Action: Restart mibd_entity)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-BAD_MSG_TYPE
### Response:
(Severity: 3), (Category: OS), (Description: 'Message type of the GSP message is corrupted.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-7-ERR_SYSDB
### Response:
(Severity: 7), (Category: MGBL), (Description: An error has occurred while doing a sysdb operation. See the message text for error details.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-NCT_BIGNEW
### Response:
(Severity: 7), (Category: HA), (Description: Higher layers of heap are requesting a size for a variable-size record that is too large.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TEMP_OUT_OF_RANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_3_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-DEBUG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB BRIDGING component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-ALARM_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that shelfmgr cannot initialize envirnoment for setting LED display or alpha display.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-BOARD_REV_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver version is not compatible with the current Board.), (Recommended Action: Reset the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-FIELD_PRESEL_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DPA failed to create field-group on this NPU.), (Recommended Action: Verify your hw-module configuration. Otherwise, collect show-tech and contact cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-SYSDB_BIND_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to connect to SysDB while starting the indicated subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBQOSMIB-4-ERR_BLOCK
### Response:
(Severity: 4), (Category: SNMP), (Description: There was an issue in retrieving stats for one of the interfaces. This could happen if one of the participating processes (qos_ma, qos_ma_ea, qos_ma_ea, ifmgr, etc) was busy and could not process the stats request. The interface in question will not be polled for the next 30 seconds to allow recovery from the problem state.), (Recommended Action: Please collect the following tech-support to find the cause of the issue: * show tech-support qos pi * show tech-support pfi * show snmp trace cbqosmib)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_EA-3-POLICE_GRAN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The LC needs to be reloaded, or the policy has to be reapplied for the configured qos police granularity to be effective.), (Recommended Action: Exit the Config-terminal. Reload the Linecard using 'hw-module location <loc> reload' option. Reapply the MQC policy on all interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_4_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-EA_MIPC_NTFN_ACK_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error while ACKing to an MIPC event), (Recommended Action: Try restarting QoS EA process get the JID by 'show processes qos-ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PMLIB-2-ERROR_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Platform Manager client library encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: Check if the process is blocked using- 'show process blocked location <r/s/i>' if the pm process is blocked restart the process using- 'process restart <process name> location <r/s/i>' to recover from this error. Please collect output for 'show log location <r/s/i>' and 'show memory summary location <r/s/i>' from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_7_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE2_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE2_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-ERR_LIST_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: This message indicates the error while processing the reply message by SysDB.), (Recommended Action: Try applying the configuration of this process/feature again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_WL_OUT_OF_RANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-EAD_INVALID_SRV6_SERVICE_TYPE
### Response:
(Severity: 4), (Category: L2), (Description: SRv6 Service TLV contains the type of SRv6 Service. Only type-6, which encodes service SID information for SRv6 based L2 services is supported. This corresponds to the equivalent functionality provided by an MPLS Label for EVPN Route-Types as defined in RFC7432.), (Recommended Action: Check if other devices in the network support different SRv6 Service types or check the Service type in packet captures. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWCMD-3-CLI_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: 'The failure pertains to show commands in snmp.' 'This does not indicate feature failures or issues'), (Recommended Action: 'This log does not indicate a system impact.' 'all show snmp CLI's for debugging purpose only' 'Recommend customer to re-try the command.' 'If there is no output, reconfigure the snmp settings and re-try')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-FAN_CLEAR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The indicated fan has measured RPM returning to operating level.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-DEVICE_DISCOVERY_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter device not discovered on pcie), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-FABRIC_LINK_DOWN
### Response:
(Severity: 3), (Category: FABRIC), (Description: One or more fabric links went down from above location.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-SYSDB_API_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SysDB operation error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_MIXED_AC_DC_POWER_MODULE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when power modules present on the satellite are of mixed type, i.e. AC and DC.), (Recommended Action: Please use either all AC or all DC power modules in the satellite)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV4_EA-3-ERROR3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SHMEM_HDR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal Error: Shared memory header corrupted.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-PORT_NUM_CONFLICT
### Response:
(Severity: 4), (Category: L2), (Description: A PTP port number has been allocated to more than one interface.), (Recommended Action: Remove and re-apply PTP configuration for the interfaces in question, in order to re-allocate port numbers for these interfaces. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-CORRUPTION
### Response:
(Severity: 7), (Category: HA), (Description: The process crashed during checkpoint heap modification, resulting in an unrecoverable heap. Process will be started from an empty heap.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-3-NOLOCK_TOPOLOGY_ACCESS
### Response:
(Severity: 3), (Category: OS), (Description: An attempt to either read or modify the topology was blocked because no lock was acquired prior to the attempt, which could result in data corruption. The SR-TE process may now be in an inconsistent state with the rest of the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The xtc_agent process may be restarted in order to recover from this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different MPLS TE FRR protection modes?
### Response:
The different MPLS TE FRR protection modes are\n- Link protection: Protects against link failure. Backup tunnel is routed around the protected link.\n- Node protection: Protects against node failure. Backup tunnel avoids the protected node.\n- Best-effort protection: Tries to protect against both link and node failure, but does not guarantee it.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-LOW_LASER_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP laser bias less than or equal to the low laser bias alarm threshold. The SFP is the pluggable optics on the line cards. The laser bias threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR handle configuration during router startup?
### Response:
During router startup, IOS XR loads the committed configuration from the Configuration File System (CFS). If there are no configuration inconsistencies or failures, the router starts with the committed configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_7
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port 7.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port 7 interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlan_netio-4-DEBUG_INIT_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN NetIO component encoutered an error during debug initialization. This is likely to cause VLAN interface setup to fail.), (Recommended Action: If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_PD-3-FORMAT_DEVICE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This debug message indicates that format device failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. .)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-PLIM_HEARTBEAT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The IPC communication between local CPU and host in the specified slot indicated in the message is not functional. If the problem persists the SPA will be reloaded to recover from the failure.), (Recommended Action: If the problem persists, try to reseat the SPA. If reseating does not help, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID allocator was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-4-LPTS_WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: When the MPP (Management Plane Protection) tries to change the LPTS (Local Packet Transport services - used to deliver the locally destined packet to the correct node on the router) filters for a interface, unexpected scenario is hit.), (Recommended Action: Check if the interface exists. If the interface does not exist, this warning can be ignored. Else the command 'show tech-support lpts' can be issued to get any possible cause, if this message keeps recurring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-FILE_ACCESS_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The given file could not be accessed due to reasons specified. Possible failures are lack of read/write permissions.), (Recommended Action: Check if the file being requested exists and has the correct read-write permissions.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_TX_FIFO_OFLOW_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-0 reported tx fifo overflow on bridge instance - 0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an CPAK temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-LSP_OOR_GREEN_NORMAL_OPERATION
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-4-CDR_NOT_READY
### Response:
(Severity: 4), (Category: FABRIC), (Description: CDR_READY status from CPLD indicates that egress CDR is not ready for access even after waiting for 200ms.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-SD_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An SD related operation failed.), (Recommended Action: This is a serious error and will prevent the system from functioning properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-FSDB_RESPONSE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fia_driver response is not encoded becuase of bufsize is too small.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-MPLS_SROPT_CRIT_RECOVER
### Response:
(Severity: 6), (Category: ROUTING), (Description: In lspnh update, SR-OPT criteria that was failing, has now been met/recovered. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-MIB_GROUP_TREE_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-WAVL_INIT
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an unexpected error which prevents it from functioning. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_IDB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed while initializing IDB library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-3-ALREADY_CALLED
### Response:
(Severity: 3), (Category: OS), (Description: The specified API has already been called.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-INFO_SHM
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered a change in the shared memory region parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-MFI_ERR_NON_FATAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error occured while processing something from or to LSD. The error is unexpected but not fatal and ISIS will retry), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-INTERNAL
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected internal error occurred in the tacacsd.), (Recommended Action: Copy the error message and trace exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE7_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE7_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-BACKUP_PARTITION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The FPGA has loaded from backup partition.), (Recommended Action: Upgrade FPGA using CLI command in admin mode -upgrade hw-module fpd <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFD_HELPER-0-INIT_FAILURE
### Response:
(Severity: 0), (Category: MGBL), (Description: An error was encountered while initializing one of the critical modules of the confd_helper. Without proper initialization of this module, confd helpder can not operate properly. Initialization will be retried.), (Recommended Action: ConfD helper is a critical component and must be operational in order to configure the router. If the same error is seen more than 5 times, contact Cisco TAC support because a reboot of the node may be required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-REPLICATOR_OOS
### Response:
(Severity: 4), (Category: SYSDB), (Description: The SysDB replicator module has been informed that it may have been out of sync when taking over as the new active server. The other replica nodes will sync up, but it is possible that a recent configuration change may have been partially or completely lost.), (Recommended Action: Check any recent commits to see if the configuration has been lost. Run 'clear configuration inconsistency' for the relevant plane.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_MPLS_EA-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-4-AO_KEYCHAIN_GET_KEY_RETRY
### Response:
(Severity: 4), (Category: IP), (Description: TCP AO tries to query keychain key detail and unable to get <key string> which is of type6. User needs to check the <show type6 server> command to verify whether Masterkey key is being configured and enabled. If it has already been configured and enabled then this indicates an issue. TCP AO will continue to retry until it gets the key string details.), (Recommended Action: Please check in <show type6 server> whether Masterkey has been configured and enabled. if this is not the case. please configure the masterkey immediately. user can configure the masterkey by this exec command - <key config-key password-encryption>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWOSERROR
### Response:
(Severity: 3), (Category: OS), (Description: OS call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-TMB_CLUSTER_PARITY
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-6-MUTEX_UNLOCK_FAIL
### Response:
(Severity: 6), (Category: SYSDB), (Description: Unlock operation failed on SysDB log file.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-DELAYED_DELETE_RC
### Response:
(Severity: 2), (Category: ROUTING), (Description: It is not expected to hit a failure during delayed delete.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_IM_INTERFACE_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error while creating an IM interface.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_ASIC_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while initializing the CPU control ASIC to either receive packets from the fabricq ASIC or transmit packets from the ingressq ASIC. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If problem either persists (following a process restart) then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FT_OIR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when any FT is OIR'ed from satellite.), (Recommended Action: Please reinsert the FT back in the satellite.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BAG_SCHEMA-4-ERR_LTRACE
### Response:
(Severity: 4), (Category: INFRA), (Description: Bag Schema Server encountered an error using the Lightweight Tracing service. The error message describes what operation has failed and why it failed. This is a fatal error and the Bag Schema Server process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-DAEMON_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon failed to initialize correctly, and will now exit. It should be restarted by SysMgr.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV6_EA-5-DEBUG
### Response:
(Severity: 5), (Category: PLATFORM), (Description: SSE IP-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_QFPCPUCTRL-1-BOARD_REV_PAR_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: CPU controller board revision parity error encountered on either mother board or daughter board), (Recommended Action: Upgrade the CPU controller FPGA image, and reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD_CLIENT-4-ERR_CLIENT_API_CALL_NOTCONN
### Response:
(Severity: 4), (Category: ROUTING), (Description: LSD client was not connected and an lsd client api was called.), (Recommended Action: Collect LSD traces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_ACCESS_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process is no longer able to access the switch's internal registers, so is unable to manage the switch. In order to recover, ESD will reset the switch, then exit so that it will be restarted by the process manager.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet', and 'show controllers switch trace' commands. Also collect the OS kernel logs. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-MODULE_AND_PORT_SPEED_MISMATCH
### Response:
(Severity: 2), (Category: L2), (Description: The speed on the module present in the port is different with the speed of the port configured via portmode), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-3-ERROR_RUN_BMON
### Response:
(Severity: 3), (Category: MEDIA), (Description: pthread_create() returns error), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-PULSE_ATTACH_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This is during the device Initialization. Unable to attach qnet input pulse to use the dispatch manager to call my local function when data becomes available %s- Error description), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-CLEANUP
### Response:
(Severity: 3), (Category: IP), (Description: The XR socket library failed to clean up correctly and return to the original state after a socket operation failed. This may result in stale state and an inconsistent view of the socket between IOS-XR processes and standard Linux processes. This can prevent this socket being used for communication with local Linux processes. Further, it can cause traffic destined for Linux processes to get dropped.), (Recommended Action: Restarting the affected process is expected to resolve the inconsistency. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while attempting to create an event manager. This failures affects the ability of the process to service various messages / pulses from other threads / processes. This facility is deemed crucial and the process automatically restarts on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-2-TRANSCEIVER_REMOVED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The optic interface module was removed on the given interface which will result in a link down. The traffic may start getting dropped after this error message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-DEST_CONNECTED
### Response:
(Severity: 3), (Category: FORWARDING), (Description: It is invalid for a subnetted tunnel destination to resolve to a connected prefix. When this message is displayed, the user must change the tunnel destination or change the routing configuration. When this is corrected, the tunnel will re-evaluate its state and come UP if other criteria for tunnel to be up are satisfied.), (Recommended Action: Change the tunnel destination or change the route resolution.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-BAD_RSVP_MSG_RCVD_AUTH_DIGEST
### Response:
(Severity: 5), (Category: ROUTING), (Description: The router received an RSVP message with a bad integrity digest. RSVP discarded the message because the digest verification failed. The 'key-strings' used may not be configured the same on both sender/receiver.), (Recommended Action: Check the configuration on the router and sending system to make sure that the authentication configuration is compatible. Especially ensure that the key-strings for the specified key ID's match. Also ensure that the peer is using a supported HMAC cryptographic-algorithm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-BLOCK_UNTIL_ACTIVE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This is a fatal error for the standby verification daemon process. Unless this is resolved, the standby process will not be informed when the node goes active following a failover event. The process will restart in an attempt to clear the error.), (Recommended Action: If the error message indicates a potential out of memory condition Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Otherwise, this indicates a problem with the sysmgr infra, Gather 'show tech-support sysmgr'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel mesh feature?
### Response:
The MPLS TE auto-tunnel mesh feature enables the automatic creation of a full mesh of MPLS TE tunnels between a set of routers. It greatly simplifies the provisioning of TE tunnels in a full mesh topology. Auto-tunnels are created between each pair of routers in the specified mesh group.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_OUTPUT-3-ERR_NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: The FHRP Output process was not able to allocate the memory that it needed to complete the operation. FHRP Output process client functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INITIAL_IMAGE_MINI_ISO_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Mini iso found in the list of initial images. Invalid input.), (Recommended Action: Check if mini iso is provided in the list for initial image and if yes please exclude the same.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-3-SYSMGR
### Response:
(Severity: 3), (Category: L2), (Description: fr_socket process was initialized successfully but was either unable to inform System Manager of the success or possibly System Manager itself was not able to collect the process status.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth max and min feature?
### Response:
The MPLS TE auto-bandwidth max and min feature specifies the maximum and minimum bandwidth values that auto-bandwidth can request for a tunnel. The max value limits how high auto-bandwidth can adjust the tunnel bandwidth, while the min value specifies the lowest bandwidth auto-bandwidth can request. These values constrain the auto-bandwidth adjustments.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-BD_MST_LOOP
### Response:
(Severity: 4), (Category: L2), (Description: A potential mis-configuration with more than one sub-interfaces in this bridge domain from the same main port and having the same msti value.), (Recommended Action: To recover from this fault it is recommended to delete from the bridge domain the extra sub-interfaces belonging to the same main port and in the same msti.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_EA-3-SSC_SEND_SRV
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a single message to the Service Director. The Service Director may not be up to date with the state of this services on this node, so the associated VASI interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the VASI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_PORT_1_OUTPUT_SQUELCHED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in 2MHz and 6.312MHz modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-DISABLED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Agent has been disabled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_SDFEC_OOM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-CLEAR_REDQ_ENTRY_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: QMgr encountered an error while programming redq entry for an interface default queue in the associated PSE), (Recommended Action: REDQ drop threshold could not be reset to 0. Collect the syslog and debug info and)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-PARTICIPANT_NOT_FOUND
### Response:
(Severity: 3), (Category: L2), (Description: An MRPDU was received on an interface where there is no participant. The specific MRPDU will be dropped and the protocol will continue to operate.), (Recommended Action: If the interface is configured to be running MRP this indicates a database inconsistency. Attempting to restart the process outputting this message may clear this inconsistency. If the interface is not configured to be running MRP, this indicates a problem in the packet path, a process restart may restore the correct paths. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPDRIVER-3-SERDES_IMEM_MULTIPLE_BIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that during initialization the SERDES SPICO for the indicated ring, NP and serdes instance had uncorrectable bit errors in instruction memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-CAN_CARD_INVALID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The card type read from the CAN Bus is not recognized to be valid. The shelfmgr will not bootup this card. The 'show platform' CLI will not show a card for this slot.), (Recommended Action: Please take the following series of actions until the 'show platform' CLI shows the expected valid card type and this error message does not appear on the console. 1- Issue the following process restart commands in sequence and then see if the error message goes away and 'show platform' CLI indicates a valid card type:: <CmdBold>process restart can-server location <active RSP><NoCmdBold> <CmdBold>process restart shelfmgr location <active RSP><NoCmdBold> 2- If the issue is not yet resolved, please reseat the affected card carefully, making sure it is fully inserted into the backplane. Try different slots in the chassis if needed. See if the error goes away. 3- If the error persists, please contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-4-OOR_THRESHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: This router has reached the threshold value for the number of Auto-RP mapping agent cache entries. This is a warning that the maximum value is being approached and steps should be immediately taken to reduce the number of cache entries or to configure a higher maximum value.), (Recommended Action: Consider reducing the number of group-to-RP mappings advertised from some set of the candidate-RPs or consider reducing the number of candidate-RPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering forwarding adjacency feature?
### Response:
The MPLS traffic engineering forwarding adjacency feature allows an MPLS TE tunnel
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-MANS_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in MANS initialization. This means that MANS is currently in Factory mode and this will cause the Services PLIM driver initialization to get blocked.), (Recommended Action: Upgrade MANS with Field FPGA image If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZL30363-5-CLOCK_STATUS
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Clock loss/selection is detected with zarlink device zl30363 for PLL0.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the significance of Route Distinguisher (RD) in Cisco IOS XR MPLS VPNs?
### Response:
The Route Distinguisher (RD) in Cisco IOS XR MPLS VPNs is used to distinguish between identical IP prefixes in different VPNs, allowing for overlapping address spaces while keeping the traffic segregated.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-FILELIMIT_TOO_SMALL
### Response:
(Severity: 3), (Category: OS), (Description: A file's max limit is too small, or internal parameter might be corrupted. This might be because of a corrupted record or Upgrade of system.), (Recommended Action: The file should be saved to other place for later debugging, and then it should be removed to recover current situation. Please clear the OBFL files, as it might be because of corrupted records. CLI : admin clear logging onboard corrupted-files location <LOC> If the issue is seen after clearing the files, please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_L2TP-6-LTRACE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB L2TP component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-4-CHKPT_SAVE_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Encountered a checkpoint save failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERDES-2-TX_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A transmit fault occurred at the physical layer on the port. It is an indication of fault in MAC/Serdes/Module. In most cases, the fault would bring the link down and cause complete traffic drop.), (Recommended Action: Please contact Cisco support and provide the output of following commands: 'show controllers tenGigE <i/f> all'. 'show serdes trace configuration location <>' 'show serdes trace periodic location <>' 'show serdes trace interrupt location <>' 'show tech-support ethernet interface location <loc>' 'show hw-module fpd location all' 'admin show inventory')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-6-CLEAR_COUNTERS
### Response:
(Severity: 6), (Category: L2), (Description: Counters on a sonet controller has been cleared by the user. This message is for information only.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN Inter-AS feature?
### Response:
The MPLS VPN Inter-AS feature allows MPLS VPN services to span multiple autonomous systems. It enables VPN connectivity between sites attached to separate autonomous systems. There are different options for implementing Inter-AS MPLS VPN, with varying levels of scalability, isolation, and complexity.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
orrspf-4-INIT_ERROR
### Response:
(Severity: 4), (Category: ROUTING), (Description: The ORRSPF process failed to initialize correctly.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-6-DEBUG_ERROR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an info message in the RDM lib to indicate that it may have failed at some check or representing the code flow), (Recommended Action: If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show tech rdm - show tech npu)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath as-path ignore' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath as-path ignore' command is used to ignore the AS path length when selecting the best path. By default, BGP prefers the path with the shortest AS path length. This command disables that behavior, allowing the selection of a path with a longer AS path if it is better in other attributes such as origin or MED.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-7-INIT_FAILED
### Response:
(Severity: 7), (Category: IP), (Description: Initialization of the IPv4 MA process failed. This can happen when the process is (re)starting and any basic infrastructure service required by the process is not available. The process recovers by restarting itself. If the error message doesn't persist, it can be ignored. If the error message persists, some basic ipv4 functionality may not be available.), (Recommended Action: Collect the output of show tech-support, show processes, show ipv4 ma trace from the location the error message comes from.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-3-ERR_EDM_NOTIFY
### Response:
(Severity: 3), (Category: IP), (Description: HSRP has failed to notify the system that the specified event has occurred.), (Recommended Action: Restart the HSRP process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-4-WARNING_X509
### Response:
(Severity: 4), (Category: SECURITY), (Description: ssh warning messages.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ERR_LTRACE_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Error ocured while enabling mcast), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-ASIC_INIT_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Crossbar fabric interface ASIC-0 failed during init.), (Recommended Action: Reboot the board. If the error persists, contact TAC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-INVALID_PLATFORM_TYPE
### Response:
(Severity: 3), (Category: OS), (Description: The QSM process wasn't able to startup up due the indicated failure during initialization. A restart of the process will be attempted. If the process can not be sucessfully started after several attempts, the board will probably be unusable.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-CONFIG_INIT
### Response:
(Severity: 3), (Category: IP), (Description: The IPV6 MA process failed to initialize its config handling mechanism and interaction with sysdb.), (Recommended Action: Restarting ipv6_ma and sysdb may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-3-EVENT_BLOCK_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-EVM_NULL
### Response:
(Severity: 3), (Category: OS), (Description: Evm null. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MEMORY
### Response:
(Severity: 3), (Category: MGBL), (Description: The server has failed to acquire the required amount of memory), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does LPTS classify and police traffic flows to the router?
### Response:
LPTS classifies traffic flows based on various packet header fields like source IP, destination IP, protocol, ports etc. It then assigns the flows to one of several pre-defined flow types. Each flow type has a configured rate limit. Packets exceeding the rate limit are dropped. This protects the router resources from being overwhelmed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-IMG_DLOAD_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in downloading Linux/Application image. Cause of the error will be mentioned in the message displayed. This error prevents Services PLIM from coming up to its full functional Active state.), (Recommended Action: Do cold reboot of Services PLIM MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-IDB_NOT_FOUND
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB maintains a database for interfaces, but was unable to add an entry to it. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Please review the output of the following commands: <CmdBold>show adjacency trace all location <node> | include <handle><NoCmdBold> <CmdBold>show im database ifh <interface> detail location <node><NoCmdBold> If the explanatory detail indicates memory exhaustion, Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-MANDATORY_REBOOT_ENABLE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-3-PTCL_DOUBLE_FREE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An attempt has been made to free a packet buffer that is already freed. This usually indicates the process using the particle has used it after it has been returned.), (Recommended Action: Please collect a core dump of the process from which the message is output, using the 'dumpcore running' command to catch the current packet memory state ('exception pakmem on' must also be configured). Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-HA_ROLE_CHANGED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Agent role on HA RP has been changed to either active or standby.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_RESTORE_DEBUG_SUCCESS
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_iterate_* failed while iterating through the chkpt list.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-FAIL_TO_GET_BP_MAP_FROM_PLIM_AISC
### Response:
(Severity: 3), (Category: L2), (Description: Sharq driver invoke Plim ASIC dll to retrieve the per port backpressure map but failed.), (Recommended Action: Please check Plim ASIC and related driver process status, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-4-EDM_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the Ethernet stats controller EDM process. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then 'show controller ... stats' commands (and their equivalents - e.g. via XML) will be unavailable.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-4-CBC_UART_RX_DROP_STATS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an informational message indicating that the cbc uart RX buffer overflow counters), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-GET_PROC_CISCO
### Response:
(Severity: 6), (Category: OS), (Description: Dumper collects all the process related data by using system call devctl. If a devctl fails, then the core file will be incomplete. This will not impact the system.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-6-UDF_ERROR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The number of UDFs configured in the system are exceeding the MAX number supported by the Platform. Only the supported number of UDFs would be programmed/processed in the LC. All the excess ones would be considered a NO OP.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-TSPI_ASYNC_FIFO_OVFL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: TxSPI async FIFO overflow.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-MANS_OCTEON_MEM_RW_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in read/write from/to octeon memory of a mans fpga device register. This error could result in communication loss between MSC and Services PLIM.), (Recommended Action: Do warm reload of the Services PLIM MSC. If the issue persists do a cold reboot of the same. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_DELETE
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods delete error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-2-RESET_RECOVERY_NOT_SUPPORTED
### Response:
(Severity: 2), (Category: INFRA), (Description: When the Ethernet Switch Driver (ESD) process encounters certain switch errors, it initiates a switch reset recovery operation. This involves resetting the switch and then exiting the ESD process so that it is restarted by the process manager. When ESD determines that the switch does not support the reset recovery operation, ESD will escalate a fault to the shelf manager to reload the card in order to recover from the originally reported switch error.), (Recommended Action: No action further action is needed. However, the recommended action for the originally reported switch error should be followed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NFEA_HW_PROG-6-INFO_MSG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Netflow punt rate is more than policer rate, it informs the user when such an event occurs), (Recommended Action: Reduce netflow sampling rate. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-2-ACCESS_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar driver detected an issue with ASIC access.), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN EVPN instance?
### Response:
To configure an L2VPN EVPN instance, use the 'l2vpn evpn' command in global configuration mode. l2vpn evpn
vpn-id 100
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-3-SHARED_MEM_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured while opening shared memory), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC_CMN-5-rest_session_queue_limit
### Response:
(Severity: 5), (Category: OS), (Description: Size of send queue exceeded limit. REST API is generating events faster, than REST client can consume. Higher number of notifications can be generated in case of problems in the network causing too many updates from IGP.), (Recommended Action: Check subscription and state of REST client. If client is already disconnected, but connection was not closed gracefully, then <Bold>clear tcp pcb <pcb><NoBold> can be used to close that connection on the router. Decrease number of generated notifications by decreasing number of elements related to subscribed notifications (number of nodes, links or prefixes in topology if client is subscribed for topology notifications or number of LSPs if clients is subscribed for LSP notifications) or solve network issue causing increased number of events.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-0-SOFT_ERROR_RELOAD_RECOVERY_2
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 2. Card will be reloaded to cover from this error.), (Recommended Action: Soft error are very rare due to Cosmic and other environmental factors. The probability of soft error on same device again is extremely low. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-3-ERR_DCMD_PSARB_BLOCK_UNTIL_DELTA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Software will automatically do recovery by restarting the reddrv process.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support multicast routing?
### Response:
Cisco IOS XR supports multicast routing through protocols like Protocol Independent Multicast (PIM) and Multicast Source Discovery Protocol (MSDP), facilitating efficient distribution of multicast traffic across a network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE_UIDB-7-ERR_INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of uidb_svr process has failed due to one of the following reasons: 1) Failed to create server context. 2) Failed to get schedular parameters. 3) Failed to initialize event manager. This would prevent process from receiving events. 4) Failed to register with debug. This would prevent process from logging debug messages. 5) Failed to bind UIDB server with MIPC server. This is needed to program features in hardware. 6) Failed to connect to PLIM asic processes. This is needed to program features in hardware. 7) Failed to initialize checkpoint. This is needed to checkpoint UIDB data to restore on process restart. 8) Failed to allocate, initialize and checkpoint shadow memory. This is needed to store and restore UIDB internal data. 9) Failed to get metro asic version. 10) Failed to attach event handlers needed to handle LWM messages. This is needed to enable/disable various features in hardware. 11) Various Sysdb or EDM failures 12) event_block failed. This indicates process has encountered unexpected error while waiting for events.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_RESTORE_ATTR
### Response:
(Severity: 3), (Category: OS), (Description: nrs_chm_chkpt_create_attr failed while restoring the set attributes from chkpt shared memory after nrs server process restarts.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET_LOOPBACK-3-PRM_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize PRM connection in the platform Ethernet loopback component), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_ASIC_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabricq Asic driver encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_MCAST-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM MCAST, error), (Recommended Action: Please collect the console log, multicast traces (show mfib trace loc <>, show mfib hardware ltrace location <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LTRACE-7-ERR_INFO_VERBOSE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: PLATFORM L2FIB, error information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to activate a software package in Cisco IOS XR?
### Response:
To activate a software package, making it the active version on the router, use the 'install activate' command. RP/0/RSP0/CPU0:router#install activate package-name
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-MSG_CERR_REGISTER_DLL
### Response:
(Severity: 3), (Category: HA), (Description: The call register the dll using cerr_register_dll failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_DLIST_SET_MORE_FLAG
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to set the 'more data' flag to an external data manager datalist has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR handle software package dependencies during installation?
### Response:
Cisco IOS XR automatically resolves software package dependencies during the installation process to ensure that all necessary components are installed for the proper functioning of the added packages.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_PARM_DEVICE_REMOVAL
### Response:
(Severity: 4), (Category: MEDIA), (Description: An invalid parameter value was passed to the media driver when the media is removed.), (Recommended Action: Report this message to TAC. Capture console log, 'show media' and 'show media trace' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB_API-3-CORRPT
### Response:
(Severity: 3), (Category: ROUTING), (Description: 'A corrupted update was received from the MRIB by the MRIB API'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBINST_DEBUG-4-INIT
### Response:
(Severity: 4), (Category: INSTALL), (Description: There is a problem with the system infrastructure - perhaps the communication infrastructure has not yet stabilised. The process which encountered this problem will automatically restart. If other processes exhibiting similar behaviour, this is a system-wide issue.), (Recommended Action: The communication infrastructure may not be up yet. This error will be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you initiate a configuration rollback in IOS XR?
### Response:
To initiate a configuration rollback in IOS XR, you can use the 'rollback configuration' command followed by the rollback point ID. The rollback point ID can be obtained using the 'show configuration rollback list' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-SCRIPT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A problem was encountered while executing the indicated script.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-4-DISABLE_PORT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: UDLD protocol detects if a link is uni-directional and disables the port. Uni-directional links can cause problems in ethernet networks and should be fixed.), (Recommended Action: Check the link on which the error happenned. Try replacing/reconnecting the GBIC/SFP/cable at either end of the link. Re-enable the port on the RP and see if the port comes up. If the problem still exists the port will be disabled again with this message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_MFWD_FRETTA-3-ERR_GEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: MFWD-FRETTA library encountered error during setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Crossbar driver encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSPI_OUTOF_FRAME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RxSPI out of frame.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can BGP prefixes be originated through redistribution?
### Response:
Routes from an IGP or static routes can be redistributed into BGP using the redistribute command under the BGP process. By default, they are assigned an origin of incomplete (?).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-BAD_CERT_USE
### Response:
(Severity: 3), (Category: SECURITY), (Description: IKE found bad certificate was used), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-ING_FBU_POOL_EMPTY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects ING_FBU_POOL_EMPTY and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-PROC_READY
### Response:
(Severity: 3), (Category: OS), (Description: System manager process in not ready.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_ETIMEOUT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Error while reading the file, Aborting the connection.'), (Recommended Action: Please consider increasing the tftp timeout value using, config CLI tftp client timeout.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-MUTEX_OP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Current operation on the mutex has failed.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-BOARD_POWERUP
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-SYSMGR_PROC_READY
### Response:
(Severity: 3), (Category: IP), (Description: domain services failed to notify the completion of initialization), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_REGISTER_MESSAGE
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal error occured in Software Policy Manager (SPM) server.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-FAILED_BOOT_DURING_INSTALL_PAUSE
### Response:
(Severity: 6), (Category: INSTALL), (Description: On bootup the node attempted to contact the Install Director on the dSC. The Install Director was contacted and informed the node that it could not boot because an installation was in progress. The Install Director then became unavailable. Therefore, to ensure that this node boots from an up to date Install Director it will reboot itself after a sufficient pause to ensure that the node the previous Install Director was on has had time to reboot. This message will only be seen on an RP.), (Recommended Action: The node will pause and then reboot to obtain the correct software. If the node ends in ROMMON (as the config-register was not set to auto-boot) then it is recommended to simply set the config-register to autoboot and reset to boot the correct software. unset BOOT sync confreg 0x2 reset)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_4_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT2_FIFO_OFLOW_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt2 fifo overflow on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT-6-TEST_COMPLETED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-REQUEST_NETMGR_MOUNTPOINT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to request netmgr mountpoint.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'vrf' command in IOS XR?
### Response:
The 'vrf' command is used to configure a Virtual Routing and Forwarding (VRF) instance. VRFs are used in MPLS L3VPNs to maintain separate routing and forwarding tables for each customer. Each VRF has its own set of interfaces, routing protocols, and forwarding policies.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-FAILED_ENS_REQUEST
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install director was not able to send an event notification. This will cause the system's install to fail in some way.), (Recommended Action: The Install director will automatically re-attempt to send the notification. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-CERR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC_RSRCMON-4-WARNING
### Response:
(Severity: 4), (Category: SERVICES), (Description: The system is not able to carry on congestion handling.), (Recommended Action: Restart the sbc proces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the DNX FIB to indicate that an error was seen during init operation. A return code is returned to PI which can do a retry or exit based on if error persists.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to display active software packages in Cisco IOS XR?
### Response:
To display a list of active software packages on the router, use the 'show install active' command. RP/0/RSP0/CPU0:router#show install active
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-3-WRITE_FAILED
### Response:
(Severity: 3), (Category: MEDIA), (Description: Reboot history index got corrupted. When recovering the reboot history index, file write operation failed. Please verify the reason why it is failed.), (Recommended Action: Erase the entire reboot history information is only option. Please execute 'erase nvram-raw: loc <loc>' command to erase the reboot info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_PROXY-3-EXIT_PROCESS
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fabric proxy failed to create an event manager during the initialization. The driver will be non-operational due to this error.), (Recommended Action: The Proxy will recover by restarting. Verify that the fabric proxy process will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-DEBUG_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The length of the received message exceed the buffer size.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-PACKET_DECODE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while attempting to decode a batch of ethernet frames which had been received. The source of the error is the Ethernet Packet Infrastructure. The received packets will be dropped as a result of this error. This could cause peer MEPs to time out, or ping/traceroute operations to fail.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-INFO_INTERNAL_TABLE
### Response:
(Severity: 6), (Category: OS), (Description: During processing of a show command, the internal LPTS data structures changed in such a way as to make completion of the show command impossible.), (Recommended Action: Try restarting netio process and then, retry the command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFMMIB-4-LOCK_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: The DOT1AG/MEF SOAM PM MIB DLL encountered an error while trying to perform an operation on a lock. The thread will continue without retrying the operation. In most cases, no further adverse behaviour should be observed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-MAX_REDIST_PREFIXES
### Response:
(Severity: 4), (Category: ROUTING), (Description: This configuration is redistibuting more than the allowable number of prefixes into an IS-IS topology. IS-IS will not advertise some of these routes. This is to prevent inadvertant redistribution of the Internet via IS-IS.), (Recommended Action: Consider reconfiguring route redistribution into the IS-IS process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-7-NHOP_TXLIST_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: PWHE txlist and ifh size exceeded.), (Recommended Action: *NONE* Platform software will correct itself if this happens)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CSFI_TIMER
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred while starting or restarting the CSF generation timer. No further CSF messages will be sent for MEPs in this domain/service.), (Recommended Action: Unconfigure CSF generation for this service, commit the configuration, then reconfigure it. If the problem persists, it may be possible to recover by restarting the 'cfmd' process on the node where the problem occurs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-SLOTID_PARITY_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC has detected that the slotid of the card doesn't have correct parity, this can becaused by backplane connectors that has been damaged due to bent pins.), (Recommended Action: Please inspect the backplane and card connectors for physical damages.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-IGNORE_REMOTE_RESET_EVENT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that the REMOTE_RESET event is received when the node is in isolated state. No action is taken as sysmgr will not allow the node to reboot.), (Recommended Action: *none*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-BAD_HEAPPTR
### Response:
(Severity: 7), (Category: HA), (Description: Internally heap pointers are kept as offset indices. A given heap pointer was found to be outside the heap.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-PROT_BFD_SESSION_DOWN_MESSAGE_LOST
### Response:
(Severity: 3), (Category: L2), (Description: One or more PROT_BFD_SESSION_DOWN PFI fast protect event has been lost. If a link which BFD session failed happened to be fast-reroute protected, fast-reroute may not have been triggered.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_1_XAUI_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-1 from XAUI on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-3-INIT
### Response:
(Severity: 3), (Category: OS), (Description: The chunk's mutex could not be initialized.), (Recommended Action: Copy the message exactly as it appears, and report it your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR8
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-PORT_FWD_ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH port forwarding encounterd some error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_35
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISSU_RELOAD_NODE
### Response:
(Severity: 3), (Category: INSTALL), (Description: As part of ISSU operation, the specified node that was warm reloaded (iMDRed) has encountered the specified failure and thus is being reloaded by the install ISSU infrastructure.), (Recommended Action: No action is required. If the node remains in failed state afer reload, please contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_PAK_AUTH
### Response:
(Severity: 3), (Category: ROUTING), (Description: Authentication failure during RIP send/receive packets.), (Recommended Action: Please check to make sure RIP interface authentication configuration is correct. If key chains are used, please make sure atleast one active key is available for send operation. Please make sure both send and receive interfaces are configured with the same authentication mode. For text authentication mode, please make sure the active password used on the send interface key chain is also active on the receive interface key chain. For MD5 authentication mode, please make sure the active key ID and password used on the send interface key chain is also active on the receive interface key chain.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-DB_DISK
### Response:
(Severity: 3), (Category: MGBL), (Description: The specified storage device is full or some files can not be deleted.), (Recommended Action: Use the 'delete' command to free up some space on the storage device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-4-COLLECTOR_TIMEOUT
### Response:
(Severity: 4), (Category: MGBL), (Description: The stats collector process that is described by the Node and PID in this message has timed out during a stats request. This may result in some stats being out of date.), (Recommended Action: If this continues to be seen then investigate the process that is causing this message. If the Node and PID are 'UNKNOWN' then 'show proc blocked' should be used to find the unresponsive collector.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_ZONE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This I2C failure indicates that a fault occurred when checking the circuit breaker status on the shelf.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-ESI_FWD_PBB_EVPN_INCOMPATIBLE
### Response:
(Severity: 3), (Category: L2), (Description: A forwarder of incompatible EVPN type is being added to an Ethernet-segment. PBB-EVPN technology is not supported alongside other EVPN technologies on a single ethernet segment. This can be the result of a misconfiguration.), (Recommended Action: Review EVPN and L2VPN configuration to determine where interfaces or bridge ports (subinterfaces) have been configured, which will fall under the same Ethernet Segment and remove them.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-6-EXIT_CODE
### Response:
(Severity: 6), (Category: OS), (Description: Exit code of the process is displayed), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-INTERNAL
### Response:
(Severity: 7), (Category: LIBRARY), (Description: The replicator library has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_MBE_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA01 burst FIFO multi-bit error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_HDR_EXT_FIFO_OFLOW_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg hdr ext fifo overflow on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE_INT_HEX
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_SSL-3-CERT_VERIFY_ERR_2_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSL certficate verify error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-3-CONN
### Response:
(Severity: 3), (Category: L2), (Description: The fr_socket process failed to connect to the event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the two main features used to secure the forwarding plane in Cisco IOS XR?
### Response:
The two main features used to secure the forwarding plane are: 1) Access Control Lists (ACLs) which filter traffic based on configured rules. 2) Unicast Reverse Path Forwarding (uRPF) which helps prevent IP spoofing by verifying that packets are received on the interface that the router would use to forward back to the source.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-3-RESMGR_ATTACH
### Response:
(Severity: 3), (Category: L2), (Description: The fr_socket process failed to advertise itself to the system as a resource manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-PTHREAD_MUTEX_LOCK_FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFD_HELPER-3-ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: An error was encountered. The failure of this is not critical to confd helper but may have significant impact to general system operation.), (Recommended Action: If the error persists, copy the error message and trace exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The autorp mapping agent failed to initialize successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_map_agent detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_map_agent detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_ABORT_PREV
### Response:
(Severity: 1), (Category: INSTALL), (Description: ISSU operation aborted because an error was encountered in the previous operation.), (Recommended Action: The reason for this issu operation failure has to be analyzed. Check the issu operation log by 'show tech-support issu' to understand the reason for the operation abort. Collect the show tech logs by running 'show tech-support issu' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-7-FILE_GARBAGE
### Response:
(Severity: 7), (Category: OS), (Description: File has garbage bytes at the end.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-DEPRECATED_RTRID
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPF router-id <interface> has been deprecated.), (Recommended Action: Use router-id <ipaddress>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9k_IFLX-5-FRONT_PORT_SHARING_WARNING
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Only 10/100M IFLX front port sharing mode is supported. No explicit blocking), (Recommended Action: Do not config unsupported IFLX front port sharing mode)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-MA_INIT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an error has occurred during the 'pbr_ma' process initialization and it may prevent PBR from functioning. Particular reason is included in the message), (Recommended Action: Allow the 'pbr_ma' process to restart with the command <CmdBold>process restart pbr_ma location <node id><NoCmdBold>. If the problem persists, contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: L2), (Description: System failed to allocate memory. It's likely that the system is running low on memory. Following are some reasons: 1) Failed to allocate memory for Egressq client add. 2) Failed to allocate memory for Egressq mapping table. 3) Failed to allocate memory for Queue leaky bucket limit table Memory. 4) Failed to allocate memory for Queue leaky bucket limit table memory. 5) Failed to allocate memory for Group leaky bucket limit table memory. 6) Failed to allocate memory for Group leaky bucket limit table memory. 7) Failed to allocate memory for Port leaky bucket limit table memory. 8) Failed to allocate memory for PLIM Asic back pressure table memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_1_RX_FRAME_ERR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-1 received an errored frame interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-IP_ARM
### Response:
(Severity: 6), (Category: IP), (Description: 'The call to ip_addr_c_init() failed'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-4-SHM_DIR_ERR
### Response:
(Severity: 4), (Category: OS), (Description: Shmwin server failed to retrieve shmwin window list information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-3-CONFIG_UNKNOWN_PARAMETER
### Response:
(Severity: 3), (Category: OS), (Description: Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.), (Recommended Action: Provide the following log: Collect Console logs and following Information -From the Shell promt of LC and RP, fetch the file /pkg/etc/inflow.conf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different MPLS TE FRR protection modes?
### Response:
The different MPLS TE FRR protection modes are\n- Link protection: Protects against link failure. Backup tunnel is routed around the protected link.\n- Node protection: Protects against node failure. Backup tunnel avoids the protected node.\n- Best-effort protection: Tries to protect against both link and node failure, but does not guarantee it.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP authentication?
### Response:
To configure RSVP authentication, use the 'rsvp authentication' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp authentication key-chain myKeyChain
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-RSRC_LOW
### Response:
(Severity: 4), (Category: ROUTING), (Description: The FIB process has detected that average utilization for specified resource has risen above a predefined high watermark value, and has enterred resource contrained forwarding mode. In this mode, the cef will only handle route deletes which may potentially freeup some memory. Due to this operational mode, RIB and FIB will be out of sync. Once routes are deleted and resource utilization level drops to acceptable levels again, cef will come out of this operational mode and resume normal operation.), (Recommended Action: Run the following command and check which resource(s) are running low on memory: <CmdBold>show cef resource location <node><NoCmdBold> Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Any action that reduces number of routes for this protocol (results in route delete events to free up resources below predefined level) will eventually result in the FIB returning to normal operation after few seconds.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-ALARM_CLEARED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Alarm cleared received from CBC, condition has alleviated.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-6-ENFORCE_INC
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled with appropriate licenses.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-TLVLIB_INIT
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to initialize with tlvlib.), (Recommended Action: Restarting pifibm_server_lc and pifibm_server_rp may fix the issue. If the issue is still seen please collect the output of the following commands: - show tech-support lpts - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-3-PAK_DOUBLE_FREE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An attempt has been made to free a packet buffer that is already freed or that a buffer that is not owned by the calling process. This usually indicates the process using the packet has used it after it has been returned or after it has been sent to another process.), (Recommended Action: Please collect a core dump of the process from which the message is output, using the 'dumpcore running' command to catch the current packet memory state ('exception pakmem on' must also be configured), the full console logs and 'show proc pidin loc <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACL_COMPRESSION_NO_SUPPORT_LC
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL with compression requires a TCAM card and sometimes, depending on card type, also requires allocation of TCAM space to ACL.), (Recommended Action: Re-attach the ACL in uncompressed mode (compression level 0), use a card with external TCAM, or allocate space to ACL via the hw-module command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-LEN_TOO_LONG
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-6-SEND
### Response:
(Severity: 6), (Category: OS), (Description: Failed send() for a domain socket.), (Recommended Action: This message is informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_QUERY_ORA-3-RUN
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal software error in the routing policy library and as a result routing policy may not be applied correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-6-BUS_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A PCIe bus error has occurred. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-5-INTERNAL
### Response:
(Severity: 5), (Category: MGBL), (Description: IPSLA module incurred an internal error. This could happen in various situations. Such as system low on memory or communication failures with other processes.), (Recommended Action: Try restarting the IPSLA process showing this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: The system might be running low on memory and adequate amount of memory was not available to complete the request), (Recommended Action: Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_AGORA_ALM_TYPE_ONE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: AGORA type one alarm.), (Recommended Action: If the problem persists, call your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-2-PLAT_ENCAP_RSRC_LIMIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: DPA failed to create a MPLS Encap due to resource limit.), (Recommended Action: Please collect the console log, DPA traces (show dpa trace loc <>), NPU Resources (show controllers npu resources encap loc <>) show controllers fia diagshell 0 'diag alloc eedb' loc <> The failure could be because we ran out of available encap resource. Report to your technical support representative for further details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTSDRVR-3-OTS_OTDR_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an OTDR failure), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-6-STATUS_LOC
### Response:
(Severity: 6), (Category: PLATFORM), (Description: It indicates the status of FPD upgrade on a particular location.), (Recommended Action: This is information only to notify the user that upgrade is going for perticular LC and no action is needed from user perspective. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_GIFT-3-INTF_RETRY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The hardware configuration for the Interface has reached the maximum number of retries. Hitting this error typically indicates that the interface has either hit physical interface creation failures, or has not been cleaned up properly.), (Recommended Action: Reload the relevant LC(s) to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-4-UNKNOWN_BFD_EVENT
### Response:
(Severity: 4), (Category: SERVICES), (Description: BFD has sent an unknown event while creating the BFD session.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_PORT_3_OUTPUT_SQUELCHED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in 2MHz, 6MHz and 64KHz modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-BFD_SEND_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to send a msg to BFD server.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_BAG_REG
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an error to register the bag to bag infrastructure that is useful for packaging up complex data into single SysDB items. This software error will cause process termination for recovery The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INRESET_INV_CARD_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the board type cannot be recognized, therefore, the node will not be able to boot up. This usually caused by an invalid eeprom content.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-NO_PROPOSAL_CHOSEN
### Response:
(Severity: 6), (Category: SECURITY), (Description: Negotiation failed with peer, No Proposal with same capability found.), (Recommended Action: Contact the remote peer's administrator, choose proposal with similar capabilities on both ends.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SUSPENSION_START_REQUEST_RECEIVED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-API_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The specified API returned the specified error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_TX_FIFO_OFLOW_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-0 reported tx fifo overflow on bridge instance - 2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOS_PORTP
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-4-QS_MANAGER_START_FAIL
### Response:
(Severity: 4), (Category: INSTALL), (Description: Process Manager has returned an error indicating that it could not start Quickstart Manager on a particular node in response to Quickstart Director requesting it to do so. The Quickstart operation has been aborted as a direct consequence of this.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SCP_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_1_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INIT-7-MBI_STARTED
### Response:
(Severity: 7), (Category: OS), (Description: The MBI processes have all been started. This is not an error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-NO_SP_INFO
### Response:
(Severity: 6), (Category: OS), (Description: No sub processor information found on this card. Display the local node information instead.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-NEWLIMIT
### Response:
(Severity: 6), (Category: ROUTING), (Description: User has changed the configuable resource limit.), (Recommended Action: No action required. This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SP_NOT_ZERO_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Non-zero seg profile detected on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_TF_INTR_FIFO_0LO_OVFL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_TF_INTR_FIFO_0LO_OVFL interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_PIDB-2-OPEN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the pidb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Please collect output of the following commands: show log show pidb trace show pidb error show pidb debug)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_MSG_SEND_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: API Version message send to the indicated target failed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-3-ERR_EXIT
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in PSE Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message and gather the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICCP-5-ISOLATION_CLR
### Response:
(Severity: 5), (Category: INFRA), (Description: At least one configured backbone interface for the ICCP group is up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_PEM_NO_INPUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when one of the power cable to power module is unplugged on satellite.), (Recommended Action: Please check Power input connections to the satellite.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-NOTNBRTYPE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Neighbor address cannot be configured on the interface if it is not type NBMA or point to multipoint.), (Recommended Action: Correct the configuration of the network type on the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered the specified error during the initialization sequence. This facility is deemed crucial and hence the process is automatically restarted on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_COPY
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the item to copy does not exist. The details are in the error string.), (Recommended Action: Check that the item to copy exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-RSI_TBL_ID
### Response:
(Severity: 3), (Category: OS), (Description: The RSI failed to translate a vrf name into a tbl id.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MULTIVER-4-DLL_SIGNATURE_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: There was a problem locating the DLL with matching signature - the problem is resolved by using existing dll installed on this node.), (Recommended Action: Check to make sure that there is no disparity in software installation across multiple nodes. Copy the output of 'show dll pid <PID>' where PID is the process id of policy_repository process. Check all the install operations whether they are completed successfully Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-5-NEIGHBOR_TIMEOUT
### Response:
(Severity: 5), (Category: L2), (Description: All UDLD neighbors have been aged out. This could indicate traffic loss on the link. If UDLD is operating in aggressive mode on the port, the link will be disabled.), (Recommended Action: Correct the link fault, then re-enable UDLD using the following command: - ethernet udld reset interface <port name>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOL_MAPPERB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-BACKEND_SCAN
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP Server was unable to retrieve the specified item(s) from the SysDB component.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-4-AP_DATA_CONFLICT
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error was encountered as the node location was being added to the attach point item. This will prevent the successful registration for this attach point and will leave this configuration space unverified with respect to policy configuration.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-FSM_NVPAIR_ATTR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: VPDN MGR failed process internal messages. This may be due to low memory conditions.), (Recommended Action: Allow the subscriber to reconnect. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-SYSDB_ACCESS
### Response:
(Severity: 3), (Category: SNMP), (Description: SonetMIB API had trouble while binding/unbinding with SysDB. %s will indicate reason of failure), (Recommended Action: Sonet MIB is not able to bind with sysdb hence not able to fetch or copy some data into sysdb. Please collect below mentioned logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-PSOC_UPGRADE_COMPLETED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that PSOC firmware upgrade is completed on the specified location.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-MALLOC_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Unable to malloc. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory heap summary all location<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory heap summary all location<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_LWM_SEND_ASYNC
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to send a pulse to a connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_RESOURCE_FAIL_1
### Response:
(Severity: 3), (Category: IP), (Description: Unable to initialize internal data structure due to the process running low on resources.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the issue still persists then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-5-SATELLITE_REGISTRATION_FAILED
### Response:
(Severity: 5), (Category: L2), (Description: CFM was unable to register to receive messages on Satellite access ports after multiple retries. CFM will continue to attempt to register, but may fail to function correctly on the Satellites affected.), (Recommended Action: The problem may resolve itself given sufficient time. If this error continues to appear, collect the required information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_REGISTER_MSGNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel backup affinity feature?
### Response:
The MPLS TE auto-tunnel backup affinity feature allows auto-tunnel backup tunnels to select or avoid links for the backup path based on configured affinity attributes. This provides more control over the backup path selection compared to the default behavior of using the IGP shortest path. Affinities allow backup paths to be optimized for specific requirements.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_6_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-GRP2_PLANE_CONNECTIVITY
### Response:
(Severity: 6), (Category: FABRIC), (Description: 15th slot 400G MSC on chassis with PID: CRS-16-LCC-B needs either of plane 3 or 4. Without these planes, 400G MSC in 15th slot will be kept in IN-RESET state.), (Recommended Action: Check if atleast one of planes 3 or 4 are available in the system. Bring up any of these planes and then manually unpower 400G 15th slot MSC-X applying the below config. 'admin-config#hw-module power disable loc <>' and 'admin-config#no hw-module power disable loc <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-6-SCRIPT_TIMEOUT
### Response:
(Severity: 6), (Category: OS), (Description: Script exceeded allotted time.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-BOARD_REV_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RSP CPU controller driver version is not compatible with the current Board.), (Recommended Action: Reset the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-COULD_NOT_AUTHENTICATE_HW
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has failed to authenticate for Cisco HW genuine check This could happen in 2 cases - Secured Local card IDPROM read failed and authentication is not possible - There ACT2 Chip Acess(bus access problem) or Secured Certificate Errors), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_LOG_INT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description followed by logging integer.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_NO_SATELLITE_AVAILABLE_SYNC_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The received and parsed GPS TOD message frame from external equipment indicates no satellite availablity, which could possibly indicate that the time-of-day received is not synchronized to a UTC/TAI timescale.), (Recommended Action: 1) Ensure GPS receiver connectivity on the external equipment.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_MA-3-BAD_MATCH_TYPE
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An accounting policy-map must contain a class-map of type IPv4 ACL. This is the only supported match type.), (Recommended Action: Define a policy-map that contains an IPv4 ACL class-map. If issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_SYSDB_APPLY_BATCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while checking for more SysDB batches after receiving request to shutdown the process. This may be due to resource starvation or an internal software programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. The IS-IS process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-3-SFP_I2C_ACK_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Port controller driver detected I2C access error on SFP port.), (Recommended Action: Ensure that the SFP plugged-in is supported. If not, please replace the SFP. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the System Logging (Syslog) feature in Cisco IOS XR?
### Response:
The Syslog feature in Cisco IOS XR is used for logging system messages related to network operations, errors, and security, aiding in network monitoring and troubleshooting.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ASYNC_IPC
### Response:
(Severity: 3), (Category: ROUTING), (Description: This message indicates that the BGP async ipc operation has error condition with the specified reason. BGP being an application of the AIPC services, it relies on the infrastructure to deliver it's ipc messsages, BGP will have recovery mechanism such as close the channel, or try to resend the message if it failed. Sometimes, this error can be 'normal' due to process restart, FO, or too much IPC messages cause IPC queues to be congested.), (Recommended Action: Some of the async ipc status is saved in the trace using 'show bgp trace aipc', and together with this message, it might be able to gather more inforamtion regarding this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FAIL_PACKAGE_CLEAN
### Response:
(Severity: 4), (Category: INSTALL), (Description: Clean was not successfully completed.), (Recommended Action: This is a cleanup issue and has no impact on functionality.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-INVALID_SYSDB_ERROR
### Response:
(Severity: 4), (Category: ROUTING), (Description: RIB recevied an unexpected error number from sysdb API.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_0_OFLOW_FIA2BR_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-0 FIA to bridge instance-3 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISK_DRIVER-3-FAILED_TO_OPEN_FILE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to open file to log debugs. If this failure occurs, debugs wont be logged.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV_DPM-4-FAULT_NOTIFICATION
### Response:
(Severity: 4), (Category: ROUTING), (Description: During an iteration of DPM a fault was detected. For more detailed information regarding faults, view 'show mpls oam dpm prefix fault'), (Recommended Action: Forwarding over the given prefix may not be deterministic nor stable. We recommend running 'show mpls oam dpm prefix fault' to determine all faults discovered thus far. If any are unexpected, review the control plane expectations and investigate the extent of the forwarding fault.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-INVALID_RECORD_MAGIC_NUM
### Response:
(Severity: 3), (Category: OS), (Description: Invalid magic number), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-6-CEMGBL_GOT_NOTIF_FROM_BCM
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Cemgbl got notification from BCM switch and displays the count and 1st index of it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-TYPE6_MASTER_UPDATE
### Response:
(Severity: 4), (Category: SNMP), (Description: SNMP configs are migrating due to change in the Type6 Master key. SNMP configs will not work during this migration.), (Recommended Action: This is just a warning message and No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-PHY_XAUI
### Response:
(Severity: 4), (Category: L2), (Description: The XAUI bus between the PLA ASIC and PHY device experienced a synchronization problem resulting in a lane failure causing a link flap. A reset of the PHY device corrected the issue.), (Recommended Action: Software corrected the issue by power cycling the PHY device. If any loopbacks have been configured on the port, they may need to be re-configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_FIB_NPU-3-INT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the DNX FIB NPU to indicate that an internal error was seen when trying to check consistency of internal data structures.), (Recommended Action: Please collect the console log, FIB NPU traces (show cef trace loc <>), FIB NPU platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_6_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different ways to enable OSPF on an interface in IOS?
### Response:
OSPF can be enabled on an interface in IOS using:
1) The ""network area"" command under the OSPF process
2) The ""ip ospf area"" command under the interface
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-MPLS_PREFIXOBJ_DELETE_FAIL
### Response:
(Severity: 2), (Category: ROUTING), (Description: In lspnh delete prefix object(sdk) failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-UNEXPECTED_REQ
### Response:
(Severity: 3), (Category: OS), (Description: Received unexpected message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-HANDLE_ADM1066_PROM
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a debug message to access adm1066 prom device through i2c. This CLI messages are printed when ADM1066 PROM is handled.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-SYSDB_CONNECT_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Could not connect to SysDB.), (Recommended Action: Restarting ipv6_io may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-3-IMDR_ABORT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FabricQ process aborted the iMDR upgrade most likely due to a prior process crash.), (Recommended Action: Examine logs to determine if the fabricq_mgr process crashes and collect relevant crash info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PIFIB-7-DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when cleaning up debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-INVALID_MRPDU_PARSE_ATTRIBUTE
### Response:
(Severity: 3), (Category: L2), (Description: An MRPDU packet has been received which MRP could not decode. The MRP infrastructure was unable to parse the packet correctly because certain fields are missing or truncated. The specific MRPDU will be dropped and the protocol will continue to operate. The message includes details of the position in the packet where parsing failed.), (Recommended Action: Use wireshark or another similar tool to verify the contents of the packet on the wire and ensure it is correctly formed. If the incoming MRPDUs are correctly formed, this error suggests invalid packet metadata. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE5_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE5_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_IF_SES_LIMIT_NOT_REACHD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address on the given access interface is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set up BGP dampening in IOS XR?
### Response:
BGP dampening in IOS XR is set up to suppress flapping routes and reduce the instability they cause in the network. router bgp 65000
address-family ipv4 unicast
dampening
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-INITIFMGR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Initialization of interface manager connection failed. The failure cause is mentioned in the error message displayed.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-LWM
### Response:
(Severity: 3), (Category: MGBL), (Description: The LWM api call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIV2_DM-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: Driver manager encountered an error and is not able recover frm it. A reason text will be supplied. Call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-CONNECT_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: Connection to IM server failed during QoS EA process init. This would lead to an inablility of QoS EA to process CAPS from QoS MA and to a potential disconnect between the hardware/software views of the configured qos policies on the system.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-SHM_INIT_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: Initialization of shared memory for PLA has failed for atleast 10 times. This happens when there is failure in creating POSIX shared memory object.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel backup feature in Cisco IOS XR?
### Response:
The MPLS TE auto-tunnel backup feature provides fast reroute protection for TE tunnels. It automatically creates backup tunnels for protecting TE tunnels based on the configured backup attributes. This feature is enabled using the 'mpls traffic-eng auto-tunnel backup' command in global configuration mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-SHMEM_CREATE_FAILED
### Response:
(Severity: 5), (Category: OS), (Description: shared memory creation in IMDR failed.), (Recommended Action: 'Restarting the process may resolve the issue.' 'If the problem persists after some tries, contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-STATS_SYNC_TOO_FAST
### Response:
(Severity: 4), (Category: INFRA), (Description: When Linux networking 'statistics-synchronization' is configured, XLNCd polls IOS-XR interface statistics at the requested rate and sets the reported values in Linux. This message is displayed when one attempt to poll statistics had not completed by the time the next attmpt was scheduled, indicating that the system is unable to reliably deliver statistics to Linux as fast as requested. As a result, Linux interface statistics will temporarily not reflect the latest IOS-XR statistics. They will be updated with the correct values next time IOS-XR statistics are polled.), (Recommended Action: This message indicates that the system is unable to reliably deliver statistics to Linux as fast as requested. If it is only seen when the system is under high load then it may simply indicate a transient issue which is now resolved, and no further action is required. If it is seen repeatedly or when the system is not under load then you may need to reduce the rate at which statistics are delivered to Linux, by modifying the configured 'statistics-synchronization' polling rate, or the set of interfaces it applies to.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-6-PLUGGABLE_INFO
### Response:
(Severity: 6), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-DB_CLEANED_UP_PREMATURELY
### Response:
(Severity: 4), (Category: L2), (Description: The database received a cleanup call before all interfaces had been deleted.), (Recommended Action: If any problems are seen, they may be rectified by restarting the edpl_ma process using the following command: - process restart edpl_ma)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC-6-INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: IPSec Base component Informational message), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP graceful restart feature?
### Response:
The MPLS LDP graceful restart feature helps to minimize the impact of LDP session resets, allowing MPLS forwarding to continue uninterrupted while the control plane restarts. It preserves the MPLS forwarding state across the restart. It is enabled with the mpls ldp graceful-restart command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-CPU_MCERR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has detected that the CPU complex in the indicated card is reporting machine check error condition that is fatal and it will be auto reset to recover from the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP neighbor password?
### Response:
To configure a password for an LDP neighbor, use the 'neighbor password' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#neighbor 192.168.1.2 password cisco123
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_REPAIR_BUNDLE
### Response:
(Severity: 4), (Category: L2), (Description: When repairing the checkpoint structures for the bundle database an error occurred for named bundle and the bundle was not checkpointed. The next time an attempt is made to checkpoint the bundle it will fail and the checkpoint table will be reconstructed again, perhaps more successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-VPWS_DUPLICATE_PEER
### Response:
(Severity: 4), (Category: L2), (Description: For a P2P EVPN VPWS xconnect, next hop for the xconnect is learnt using EAD route received from the remote. Incase of Single Home, only 1 next hop for a xconnect can exist. An EAD will be considered duplicate under following conditions: (1) EAD routes with same Eth Tag ID(AC-ID), EVI & ESI as zero or different non zero ESI's are received from multiple peers. (2) An EAD route that is same as the local EAD within an EVI is received from atleast 1 peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-BAD_MSG_TYPE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Found an unsupported AAA message type in avlist.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMS-3-MY_SAVE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The client failed to save its own sequence data to Checkpoint. If the process restarts before the save is successfully retried, remote clients may get out of sync, and data loss could occur.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSPI_CAL_ECC_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RxSPI Calendar ECC multiple bits error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_TX_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: An attempt to create or start a timer for periodic sending failed. Regular LACPDUs will NOT be sent out. This suggests that the line card is running low on system resources. Once some system resources have been released, the bundlemgr_local process should be restarted to retry the timer creation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_OBJ_LIB-6-RETRY_INPLACE
### Response:
(Severity: 6), (Category: PLMGR_OBJ_LIB), (Description: Inplace modification for a given transaction is ongoing. This could happen if during inplace modification producer (policymgr) gets restarted and the client is not aware of it.), (Recommended Action: Wait until the current inplace modification is completed before attempting a new one.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-CFG_INCONSISTENT
### Response:
(Severity: 4), (Category: L2), (Description: CFM recieved a configuration update that can not be processed because it is not consistent with the current internal state. The requested update will be rejected.), (Recommended Action: Restarting the process may help to resynchronize the system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-3-V6_SRC_CMPR_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Request to TCAM Manager for IPv6 src prefix compression failed. QOS policy on this interface will not take effect since TCAM entries are not programmed.), (Recommended Action: The QoS policy on this interface must be removed to free up other allocated hardware resources. Go to the interface and do 'no service-policy input | output <policy-name>' 'commit')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-UBOOT_UPGRADE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error occured while uprading the uboot image. Cause of the error will be mentioned in the message displayed. The upgrade of uboot image will fail and could lead the card to be in inconsistent state.), (Recommended Action: Look for the error message and take necessary action mentioned in the error message. For eg, the upgrade is being attempted without putting the card in uboot mode. The message would suggest the user to put the card in uboot mode and proceed. If problem persists, do a card reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-MACSEC_ENABLED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-RAW_PART_IO_MNT_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to initialize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-ALLOC_ARENA_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN failed to allocate the arena's virtual range from the server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin summary location 0/x/CPUx - show memory <jib> location 0/x/CPUx - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the significance of using BFD in Cisco IOS XR?
### Response:
Bidirectional Forwarding Detection (BFD) in Cisco IOS XR provides fast failure detection times for various network protocols, improving network stability and reducing downtime.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-3-AUTO_UPGRADE_CONFIG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A failure has occured when applying FPD auto-upgrade configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINK-5-CHANGED
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The interface has changed state.), (Recommended Action: If the state change was unexpected, confirm the configuration settings for the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-POWERRELOAD_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being reloaded on account of critical fault/alarm detected on the node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERR_INIT_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-6-CFG_SIZE_HIGH
### Response:
(Severity: 6), (Category: SYSDB), (Description: The message to the user to indicate that the requested config size excceds the high end of the system memory limits), (Recommended Action: *RECURR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-4-LTRACE_INIT
### Response:
(Severity: 4), (Category: INSTALL), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: This indicates that the ltrace infrastructure could not be initialised. It only impacts ltrace message logging and has no impact on the functionality of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-ROUTER_ID_CONFLICT2
### Response:
(Severity: 5), (Category: ROUTING), (Description: This informational message appears as user-configured router-id of another BGP instance is the same as IPARM's default router id. User should change the router-id.), (Recommended Action: User should change the router-id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHANCON-7-NO_PACKET
### Response:
(Severity: 7), (Category: OS), (Description: Display index), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-TRAPEMPTY
### Response:
(Severity: 4), (Category: SNMP), (Description: A trap destined for the given address was empty. This is an internal software error.), (Recommended Action: Restart snmpd process.if still noticed this message check the process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_XAUI_PLL_LOCK_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-1 XAUI PLL not locked on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_9_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-THREAD_CREATE_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Thread create failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-NSR_SYNC_DONE
### Response:
(Severity: 5), (Category: ROUTING), (Description: LDP Non-stop routing initial-sync event has completed successfully for some or all peers.), (Recommended Action: If number of peers do not match the number of peer for SYNC_START, then Check LDP logs and traces to see why not all attempted peers were successfully synced.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-EDM_REGISTER_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: The process failed when attempting to register its external data manager with SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMIO-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-LIBENS_PRODUCER
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric FIA ENS library producer error), (Recommended Action: Report the error)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_HWOFFLOAD-4-LC_SCALE_LIMIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: LC level scale limit has been reached.), (Recommended Action: All new sessions on this LC will be kept in ADMIN-DOWN state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the 'install replace' command in Cisco IOS XR?
### Response:
The 'install replace' command in Cisco IOS XR replaces the current software with a new version, effectively performing an upgrade or downgrade of the system software.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SSP_INTR_SFIFO_FULL_IF1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SSP_INTR_SFIFO_FULL_IF1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-EVENT_CONN_NOTIFY
### Response:
(Severity: 7), (Category: INSTALL), (Description: The library failed to register for notifications on a connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-PUF_MEDIA_ACCESS_ERR
### Response:
(Severity: 3), (Category: OS), (Description: There indicated media cannot be ccessed to read/write timezone configuration file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What features of IOS XR BGP help improve convergence times?
### Response:
Several features help improve BGP convergence times in IOS XR: 1) Update groups allow efficient generation and transmission of BGP updates by grouping neighbors with the same outbound policy. 2) Best-external route injection allows the router to advertise the best route learned from an eBGP neighbor back to another eBGP neighbor, thus providing faster convergence than if the route had to be learned via an iBGP neighbor. 3) Add-path allows the router to advertise multiple paths for the same prefix, thus providing faster convergence in the event of a path failure. 4) Next-hop tracking allows the router to track the reachability of the next hops of BGP routes, thus providing faster convergence if a next hop becomes unreachable.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different options for connecting a CE router to a PE router in an L3VPN?
### Response:
There are several options for connecting a CE router to a PE router: 1) Static routing, where the CE-PE routes are manually configured on both routers. 2) eBGP, where the CE and PE routers run eBGP to exchange routes. 3) OSPF, where the CE and PE routers run OSPF to exchange routes. The PE router redistributes the OSPF routes into MP-BGP. 4) RIP, where the CE and PE routers run RIP to exchange routes. The PE router redistributes the RIP routes into MP-BGP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_10_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-CPM_REG_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to failure of registration with CPM. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_MEMMON-6-MEM_NORMAL
### Response:
(Severity: 6), (Category: INFRA), (Description: Memory usage is below minor threshold, state is NORMAL.), (Recommended Action: Nothing required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-ACTION_COMPLETE
### Response:
(Severity: 6), (Category: INFRA), (Description: A user requested install operation has completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while attempting to create an event manager. This failures affects the ability of the process to service various messages / pulses from other threads / processes. This facility is deemed crucial and the process automatically restarts on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-NO_MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: QSM could not obtain system meory while performing the indicated operation.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR2_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-2 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-RESTORE
### Response:
(Severity: 7), (Category: SYSDB), (Description: If an EDM registers or reregisters on a path on which items already exist (and SYSDB_REGISTRATION_OPTION_SCAN has been specified), then those items have been deleted but not all restored after the EDM registration, so the system may now be in an inconsistent state.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-DRIVER_READY_TIMEOUT
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver running on the indicate card did not finish the basic initialization operation in time. PM will attempt to recover from this failure condition by restarting CCC driver multiple times. If after 5 times CCC driver still can't complete basic initialization, Then the SysAdmin VM will be restarted as another attemp to recover from this failure condition.), (Recommended Action: If SMU installation triggered this failure condition, try to remove the SMU and then reimage the card to recover from this failure condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a logging host?
### Response:
To configure a logging host for syslog messages, use the 'logging' command in global configuration mode. RP/0/RP0/CPU0:router(config)#logging 192.168.1.100
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-ETHERENCAP
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MAC address length provided for the ethernet encapsulation is wrong.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-SYSTEM_CALL_TIMEOUT
### Response:
(Severity: 6), (Category: OS), (Description: This syslog msg is printed out when a system call blocked too long, and is unblocked forcibly by internal timeout mechanism. This msg logs the timestamp when the timer started last time, and the timeout value specified for that.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-6-UNPAIRED_DRP
### Response:
(Severity: 6), (Category: HA), (Description: This is an informational message output during SDR configuration commit time only if an unpaired DRP node is being assigned to an SDR.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SCAN_REGISTERS_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Core dump failed because scanning registers for the process failed. This will impact the core file and the context file.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_IO-7-ERR_IM
### Response:
(Severity: 7), (Category: ROUTING), (Description: Some error occurred in operations with IM. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
sIMP-4-MSG_WARN
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_BW_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The signalled bandwidth on the specified tunnel interface has changed.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status bw-change'\ interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-INTERNAL
### Response:
(Severity: 3), (Category: SNMP), (Description: General internal failure. This is likely an internal software error.), (Recommended Action: If there is a crash/deadlock, you may need to collect logs from 'show process blocked' and 'run attach_process -p <pid of crashed process>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-SR_ULOOP_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing something related to a global micro-loop avoidance This is a fatal error related to the global microloop avoidance and hence we will not be able to perform the microloop avoidance functionality, at least for the latest topology cahnge interface that is being), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error happened, this may be due to an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_OTN_OOF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-OUT_OF_MEMORY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Eliminate system processes or add memory), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes msdp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes msdp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Using the Job ID from the above command, please run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes memory <Job ID> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes memory <Job ID> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-CDM_OPEN
### Response:
(Severity: 3), (Category: OS), (Description: Unable to open a CDM table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-3-ERR_BUF_NEVER_FITS
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered RIB buffer can not handle single route.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SC_CARD_VOLTAGE_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Shelf controller observing voltage fault/fluctuation.), (Recommended Action: This condition indicates potential votlage fluctuation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-NP_OOR_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: NP system resources have been exhausted and cannot be recovered), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_PKT_F2_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 2 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LWMESS-7-UNLOCK_CONN
### Response:
(Severity: 7), (Category: OS), (Description: The mutex for the channel connection list could not be released), (Recommended Action: This is an internal error and should be reported to TAC. Try re-starting the offending application. If that does not work, a memory dump should be taken (to assist TAC) and the router should be rebooted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-CARB_FIL_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter driver detected a carb filter error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_FILERESTORE
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-7-ERR_SYSDB_FD
### Response:
(Severity: 7), (Category: SECURITY), (Description: Error encountered while using the System Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_MESH_TUN_DEST_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the auto-mesh tunnel aborted since it would have exhausted the tunnel destination scale limit), (Recommended Action: Reduce configured/auto tunnels to below the system scale limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_NETIO-5-SET_MAPPING_FAILED
### Response:
(Severity: 5), (Category: ROUTING), (Description: MPLS could not set control mapping for underlying protocol.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-1-INSTALL_TRANS_IN_PROGRESS
### Response:
(Severity: 1), (Category: OS), (Description: An Install transaction is in progress. Encryption operation cannot continue.), (Recommended Action: Wait for install transaction to complete before requesting the encryption operation again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-5-NBRCHG
### Response:
(Severity: 5), (Category: ROUTING), (Description: PIM neighbor state change message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLCTRLR-4-FEAC
### Response:
(Severity: 4), (Category: L2), (Description: New Far End Alarm Code received.), (Recommended Action: No Action Required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1-2-NOMEM
### Response:
(Severity: 2), (Category: L2), (Description: The process is out of memory. Unable to initialize memory for add/del queue for add or del channel group request.), (Recommended Action: Check process list for source of memory loss. Check if h/w memory requirements are met. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-ERRDIS_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The port should have been Error Disabled, but an unexpected error has prevented it from being shut down. The port is still up, and will not be disabled.), (Recommended Action: Shutdown the port manually if it is still desirable to bring it down. Otherwise, no action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-EVM_CREATE_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: The IPv4 MA process could not create the event manager to handle the events to be received by the process. This can happen when the process is (re)starting. The process recovers by restarting itself. If the error message doesn't persist, it can be ignored. If the error message persists, some basic ipv4 functionality may not be available.), (Recommended Action: Collect the output of show tech-support, show processes, show ipv4 ma trace from the location the error message comes from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-INVALID_MRPDU_PAYLOAD
### Response:
(Severity: 3), (Category: L2), (Description: An MRPDU packet has been received but the contents of the packet cannot be determined. This is due to packet metadata fields set by the platform being invalid. The specific MRPDU will be dropped and the protocol will continue to operate.), (Recommended Action: Use wireshark or another similar tool to verify the contents of the packet on the wire and ensure it is correctly formed. If the incoming MRPDUs are correctly formed, this error suggests invalid internal packet metadata. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-EOBC_CHIP_DOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Hooper chip shows the register reading 0xffffffff. Recovery action may take place.), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-EA_LTRACE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Trace initialization failed in packet programming path. Packet path initialization is aborted and may be retried.), (Recommended Action: Restart the protocol process. 'process restart <protocol> location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON_LIB-3-IOFPGA_WATCHDOG_PUNCH_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Error occurred in HW watchdog punching logic due to which watchdog punching has stalled. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-NODE_BOOT_OPTIONS_CLEAR
### Response:
(Severity: 6), (Category: INSTALL), (Description: The boot options of the specified node are cleared when the node preparation is complete.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-FTRUNCATE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition, the ftruncate failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV4_EA-3-CRITICAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE IPV4-EA, Critical error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-SATELLITE_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred on the satellite.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTT2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_MDM-3-METADATA_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: The process is exiting, due to Failure in CPP Infra Metadata Mgr.), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure metadata location < > *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-MAP_SERVER_REGISTER_ALLOWED_LOCATOR_MISMATCH
### Response:
(Severity: 5), (Category: IP), (Description: 'The map-register contains RLOC that is not in the site's ' 'allowed locator list.'), (Recommended Action: 'Ensure map-server has the registering RLOCs ' 'added to the site's allowed locator list.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-MUNMAP
### Response:
(Severity: 7), (Category: HA), (Description: When attempting to free memory that is no longer in use, the checkpoint library received an error from the kernel.), (Recommended Action: Collect system log information and forward to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-4-BUS_WARNING_THRESHOLD_EXCEEDED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-SCRATCH_TEST_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CPU at the failed location has failed to access the named device scratch register.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_7_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-CBC_UART_FILE_DESC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Informational log only), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_LIB-2-OOR_PROC_RESTART
### Response:
(Severity: 2), (Category: L2), (Description: The l2fib_mgr process on the node has detected that a process required to handle updates is restarting. Normal operation will resume once the process has restarted.), (Recommended Action: Normal operation should resume automatically, once all resources are declared available again; to know the current status of l2fib_mgr's resources, use the command 'show l2vpn forwarding resource location <>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-UNUSABLE_TUNNEL
### Response:
(Severity: 4), (Category: ROUTING), (Description: TE or XTC has sent an unusable tunnel to ISIS), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_7
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt link failed), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-NODEID_FAIL
### Response:
(Severity: 6), (Category: OS), (Description: Failed to get the local nodeid from platform library.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUB_UTIL-3-THROTTLE_INTERNAL
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: Subcriber Session Flow control Infra init encountered unexpected error, so the sesison flow control feature is not enabled.), (Recommended Action: Please collect the following logs when this ios message is seen. 'show subscriber infra readiness trace process <process name>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-MBIST_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates possible fault with the NP internal memory.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-3-DLL_INIT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted. This condition can occur while : 1. Trying to get the host Event Manager 2. Initializing the debug library), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ADD_SESSION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to add_session() was unsuccessful'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-CALLOC_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-MEM_ALLOC_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The requested operation could not be accomplished because of a low memory condition. This error could impact Linux/Application image download and Launch, Services PLIM IPC (Inter Process Communication) etc.), (Recommended Action: Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-4-RESYNC_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: A Linux Packet classifier instance running on a LC node failed to resynchronize its Linux socket database with the master version on the RP, after multiple retry attempts. It will continue to retry, but the Linux packet path may experience disruption until the resynchronization is complete.), (Recommended Action: Periodic attempts to connect will continue to occur. This condition may be expected in scenarios where nodes are brought up and down (e.g. ISSU or RP failover). If this message continues to be seen outside those scenarios, it may indicate a problem with GSP. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-INFO_BODY2
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The resource depletion information in the following format: PROGRAM_COUNTER COUNT), (Recommended Action: It is an informational message along with packet depletion log message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_EA-3-RELOAD_LC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The LC needs to be reloaded for the configured qos shaping granularity to be applied.), (Recommended Action: Exit the Config-terminal. Reload the Linecard using 'hw-module location <loc> reload' option.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-SET_TARGET_NODE_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: An error occurred during sysDB health check. Not able to set the remote target node on which the health check needs to be done.), (Recommended Action: In most cases, this would be transient error. However, if this happens repeatedly, please collect 'show tech sysdb'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-7-INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Information message from Discovery driver on software error condition.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM_PLATFORMS-2-ERR_HEX
### Response:
(Severity: 2), (Category: L2), (Description: Error in cem operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-ASYNC_IPC_STATUS
### Response:
(Severity: 5), (Category: ROUTING), (Description: This notice message indicates that the BGP async ipc operation has an important status change, such as connection is up or down, or the instance has received all the initial configurations from BPM.), (Recommended Action: This is in most cases informational only, and are part of the normal operation such as process is up, or RP switched over, etc. But this message can also be used to assist debugging bgp configuration related async ipc issues.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-EVENT_BLOCK_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT0_PROTO
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP protocol error on the HT0 interface. This is logged when the HT interface experiences a protocol error on the HT interface.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-EVENT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: This system encountered an error while trying to get an event from the event handler.), (Recommended Action: Restart of EIGRP might solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-0-SEM_UNCORR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Egress Mux FPGA has encountered uncorrectable error. Reloading LC to recover.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-ERROR_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a debug message in the NP Driver to indicate an operation or condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-IGPS_MODE_NOT_SUPPORTED_IN_HARDWARE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The synchronization port 3 is for Internal GPS but Internal GPS is not Supported on this platform), (Recommended Action: Do not attempt to configure RP clock interface 3)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-SRMS_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: The IS-IS process failed to initialize the service for the specified error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-EVM
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external event manager function failed. The impact of this error is insignificant, unless the error condition persists for a duration close to the minimal DeadInterval used over all OSPFv3 interfaces.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel backup affinity feature?
### Response:
The MPLS TE auto-tunnel backup affinity feature allows auto-tunnel backup tunnels to select or avoid links for the backup path based on configured affinity attributes. This provides more control over the backup path selection compared to the default behavior of using the IGP shortest path. Affinities allow backup paths to be optimized for specific requirements.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBC-3-CANBUS_A_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CBC detected CANBUS A failure. This may be a serious failure, however the system may continue functioning as expected despite the failure.), (Recommended Action: Reboot the LC. If the problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-FEEDBACK_OUTSIDE_RANGE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the nsf ietf command in IS-IS?
### Response:
The nsf ietf command is used to enable IETF-standard Non-Stop Forwarding (NSF) for IS-IS. Like Cisco NSF, IETF NSF allows the router to continue forwarding traffic during a supervisor switchover or a software upgrade. However, it uses a different mechanism for synchronizing the database with neighboring routers after the switchover or upgrade.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_TM_DETACH
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to remove a managed timer registration from an event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What information is contained in an OSPF hello packet?
### Response:
An OSPF hello packet contains the router ID, area ID, network mask, hello interval, router dead interval, router priority, DR/BDR IP, and a list of neighbors seen.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-LTRACE_ERROR
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB process was unable to open the trace buffer use to record its activity for diagnostic purposes. The 'show trace adjacency' command may not work. The process will attempt to recovery by restarting. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: This shows that there are underlying system level problems, so review all recent unsolicited errors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-REMOTE_SESSION_STOP_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A request was made to stop a remote loopback session, but either no response was received, or a response was received indicating that the request failed.), (Recommended Action: No action is necessary, as the session will eventually time out. Further requests can be sent to retry the stop attempt if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-STATE_CHANGE_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: An unknown error was encountered saving state at the end of a successful operation. Further install actions may error if state is inconsistent. A system reload may be required to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-3-CAP_ADD_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is an error when adding batched channelized interface caps.'), (Recommended Action: Please try to reload that particular SPA or restart the SPA process associated with that SPA. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support in-service software upgrades (ISSU)?
### Response:
Cisco IOS XR supports ISSU by allowing software upgrades without interrupting the router's operation, ensuring continuous network service during the upgrade process.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-HIGH_POWERED_PLIM_NOT_POWERED_ON_IN_LOWER_BAY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: High Powered PLIMs in the lower slot (s = 8..15) may only be powered on if there is an High Powered PLIM powered on in the paired upper slot (slot = s-8) or if the paired upper slot is empty.), (Recommended Action: Insert the High Powered PLIM in an upper slot (s = 0..7), or in the lower slot(s = 8..15) where the slot above it(slot = s-8) is either empty or having an High Powered PLIM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-DDR_BUS_BIT_STUCK_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: DDR bus databit stuck on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-NOTIF_HANDLE
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to handle a notification from the respective component.When this issue happens, it will trigger an automatic restart of pifibm_server_lc process), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_SERVER-3-GN2412_CONF_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The GN2412 retimer chip that amplifies the voltage to line cards in the lower half of the shelf could not be configured due to timeout.), (Recommended Action: 1) process restart i2c_server location < active RP location> 2) if 1 doesnt help , reload the RP)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMORB_XMLAGENT-3-CRYPTO_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: The crypto pie is not properly configured and can't be initailized), (Recommended Action: Configure crypto according to crypto setup procedures)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-CERT_DOESNT_MATCH_ID
### Response:
(Severity: 4), (Category: SECURITY), (Description: Peers claimed identity doesn't match what we can glean from the certificate.), (Recommended Action: 'Contact remote peer and/or his administrator if session doesn't come up')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-SETSOCKOPT_FAULT
### Response:
(Severity: 6), (Category: IP), (Description: An error occurred whilst trying to setsockopt on the socket. Session will continue.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_1_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-LTRACE_INIT_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: ltrace initialization for ltrace config failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP temperature less than or equal to the low temperature warning threshold. The XFP is the pluggable optics on the line cards. The temperature threshold values are read from the XFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the XFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-6-ERR_UPGRADE
### Response:
(Severity: 6), (Category: L2), (Description: This is a Informational message in the plim_8p_10ge driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-READERINIT
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred while preparing to read instructions from the command line.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-NON_HIGH_POWERED_PLIM_NOT_POWERED_ON_IN_UPPER_BAY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Non High Powered PLIMs in the upper slot (s = 0..7) may only be powered on if there is no High Powered PLIMs powered on in the paired lower slot (s+8).), (Recommended Action: Insert the Non-High Powered PLIM in a lower slot (s= 8...15), or in the upper slot (s = 0...7) where there is no High Powered PLIM in the lower slot (s+8).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-ALL_FANTRAYS_MISSING_CLEAR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: One or more fan trays plugged into the chassis, chassis cooling is now in operation. One fan tray runs at full speed by SW default and provides partial chassis cooling, two fan trays run at computed speed based on ambient temperature.), (Recommended Action: Give CLI: (admin)# show env --> all sensor output (admin)# show env trace (exec)# show env led details Specifically look at temperature and fan speed sensors output, fan speeds initially adjust to their computed speed given the ambient temperature and then as ambient temperature drops, the fan speeds continue to adjust downward until reaching steady ambient temperature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-TEST_FAIL
### Response:
(Severity: 3), (Category: DIAG), (Description: A diagnostic test has found an error on the line card.), (Recommended Action: Ensure the line card is firmly in the slot, reseat if necessary, and attempt to run the test again if the line card is not seated properly in the slot. If the line card was properly seated in the slot, copy the error message exactly as it appears on the console, gather the output of show tech-support, and contact your Cisco technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-3-DETECTED_CDMA_PORT0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver detected an attempt to DMA to port 0. The request was discarded and not performed. %d - channel number %d - queue number %s - client name %x - address high 32bit %x - address low 32bit), (Recommended Action: Investigate the client that attempting the DMA access No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-TX_CH_LO_PWR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low power on a channel. The channel may not be functioning properly, and can cause cell drops, or corruption in the downstream. This is a precursor to the Tx LOS.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA_CAPI_SERVER-3-IOFPGA_INTR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_SIM-3-BATTERY_LOW
### Response:
(Severity: 3), (Category: MEDIA), (Description: Detect NVRAM low battery state, the data stored in NVRAM may be destroyed after power down the board whit battery low state.), (Recommended Action: 'NVRAM Battery may need to be replaced')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-STARTUP_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: locald process failed to startup properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_AGENT-4-INVALID_UPDATE
### Response:
(Severity: 4), (Category: INFRA), (Description: Feature Agent received a support or use value for an unexpected feature from the identified process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: L2), (Description: --), (Recommended Action: Typcially these indicate that ltrace is out of service. check at other processes using ltrace and see whether the problem happens to them.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-1-IPACCESSDLLOPEN
### Response:
(Severity: 1), (Category: ACL), (Description: This message is seen when the process fails to open the DLL 'libipv6_acl_tree.dll'. This failure may occur on RP and LC. It may fail to open the DLL due to any one of the following reasons: 1. passing the bad mode like no share mode(RTLD_NOSHARE) 2. list of DLL objects is empty or the list itself doesn't exits. 3. if no symbol in executable. 4. if the memory allocation fails at any stage 5. if the dll is not unique with respect to the other DLL's loaded and placed in the list.), (Recommended Action: This message may occur during process initialization. Please try restarting the process that issued this error message with the command. <CmdBold>process restart <process_name> location <node id><NoCmdBold>. Process name should be printed in the message already.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-UC_HI_MBE_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Unicast high priority fifo multi-bit ECC error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-SCRATCH_MPA_TEST_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPU at the failed location has failed to access the named device scratch register.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-5-OIRIN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Entity specified in the messages is inserted into the chassis and inventory manager is updated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMATTR-3-NOTIFY_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The attribute owner library has failed to send a bulk notification message to the attribute clients. However, the attribute owner that produced these notifications is not aware that they failed to be sent. This could result in the attribute clients being out of sync with this owner.), (Recommended Action: If the system appears to be in a low-memory condition (check the output of 'show mem summary') then this is most likely the cause of the problem. Please try to fix the low-memory condition. If this is not the case, then contact technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-REMOTE_SESSION_START_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A request was made to start a remote loopback session, but either no response was received, or a response was received indicating that the request failed.), (Recommended Action: Further activate requests may be sent to retry the session start. If no responses were received, this may indicate that latching loopback is not permited at the target address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does LPTS classify and police traffic flows to the router?
### Response:
LPTS classifies traffic flows based on various packet header fields like source IP, destination IP, protocol, ports etc. It then assigns the flows to one of several pre-defined flow types. Each flow type has a configured rate limit. Packets exceeding the rate limit are dropped. This protects the router resources from being overwhelmed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT_HDR_EXT_FIFO_OFLOW_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt hdr ext fifo overflow on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-6-bridge_oor
### Response:
(Severity: 6), (Category: L2), (Description: Bridge table OOR during bridge creation event), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-7-ERR_LTRACE_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID Aggregator Could not open the annunciated ltrace buffer. The FGID component and the system should still function as normal, with the exception that ltrace will not be available for fgid_aggregator process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-EDM_OPEN_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: While processing the indicated show command, the ipv6_io process could not connect to the SysDB server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-4-STARTUP_FILE_OPEN_WRN
### Response:
(Severity: 4), (Category: MGBL), (Description: Failed to open the startup configration file for any of the following reasons: - file does not exist. This may be case when booting for the first time or when even the default startup config file does not exist. IGNORE the message in this case. - CONFIG_FILE is set to a directory. - the config file doesn't exist under the current directory. - Illegal file name. set CONFIG_FILE to a valid file name an retry. - Other system errors. The last part of the error message should give a hint of the system error.), (Recommended Action: Since the startup configuration file cannot be opened, no run time configuation will be available. Make sure a startup config file exists somewhere and CONFIG_FILE points to it. Run copy running-config startup-config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: svc pm encountered a fatal error and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-DUPLICATE_INTF
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: XR and Linux interfaces specified in XR_INTERFACES must be unique.), (Recommended Action: Check for duplicate interfaces in the XR_INTERFACES environment variable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel primary feature?
### Response:
The MPLS TE auto-tunnel primary feature enables the automatic creation of primary MPLS TE tunnels between tunnel head-end and tail-end routers. It simplifies the provisioning of TE tunnels by automatically creating them based on a template configuration. Auto-tunnels are created to next-hop routers learned via IGP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT_FIFO_OFLOW_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt fifo overflow on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-invalid_frag_filter_combo
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This message will typically occur when an ACE is specified when multiple fragment filters are specified in an ACE of an attached ACL that are mutually exclusive.), (Recommended Action: Make sure that the only one of the fragment filter is specified.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ERR_SERVICE_CONN_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver failed to connect to the identified service during the driver initialization. The driver will be non-operational due to this error.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-REFERRAL_COUNT
### Response:
(Severity: 7), (Category: SYSDB), (Description: An internal library error has caused a connection attempt from a client to SysDB to fail.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-TSP_B_PKT_DECODE_DIS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSP decoder B disabled but packet received.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-SHIP_REG_PERFORMANCE_COUNTERS_FAILED
### Response:
(Severity: 5), (Category: OS), (Description: 'Ship registration for performance counters failed.' 'Ship functionality may not work properly.' 'IMDR will proceed without fail.'), (Recommended Action: 'Restarting the process may resolve the issue.' 'If the problem persists after some tries, contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_GRP-3-ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An error occurred in ace_grp dll), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-ID_CERT_RENEW_SUCCESS
### Response:
(Severity: 6), (Category: LICENSE), (Description: Customer ID cert has been renewed successfully and can continue to use the device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_SERVER-3-ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The specified operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-4-NODETYPE
### Response:
(Severity: 4), (Category: OS), (Description: Procfind was did not recognise the node type on which it was running, and therefore assumed it was a linecard.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-ECM_RETRY_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The specified process encountered an error while attempting to schedule a retry for a failed operation. The operation will not be retried. This may indicate that system resources are low.), (Recommended Action: Attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RASF-2-NO_COMPARE
### Response:
(Severity: 2), (Category: ROUTING), (Description: This is a logic error in the construction of one of the ORA entities. A compare function was missing at the 'per route' level of detail.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-6-NTP_DRIFT
### Response:
(Severity: 6), (Category: ROUTING), (Description: Provides information about the NTP time drift in RCMD.), (Recommended Action: This is for information only. It indicates RCMD detects the NTP time drift. There might be some inconsistent data in RCMD. Please restart RCMD Server Process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-FIT_HARD_RESET
### Response:
(Severity: 6), (Category: FABRIC), (Description: This indicates that the FIT tool has forced/induced a hard reset.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-HEAP_CORRUPT
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-7-INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of packet filter process has failed due to one of the following reasons: 1) Failed to initialize event manager. This would prevent process from receiving events. 2) Failed to initialize SSE Pfilter EA Library. This would prevent process from doing any of its tasks. 3) event_block failed. This indicates process has encountered unexpected error while waiting for events.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_OUTPUT-3-ERR_CLIENT_OUT_OF_SYNC
### Response:
(Severity: 3), (Category: IP), (Description: The FHRP Output process Packet thread was unable to signal to the Main thread to request a resync with an FHRP protocol and is now out of sync. Process restart may be required to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD-3-CHKPT_SAVE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD encountered an error while checkpointing interface info. While this will not affect present service, it will affect CPU bound fwding if partner process restarts.), (Recommended Action: If any traffic is affected after partner process restart, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL0_LO_OVERRUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL0_LO_OVERRUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_lite-3-ERR_SHMEM_MMAP_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to mmap the shared memory fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_MBE_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA10 burst FIFO multi-bit error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-3-ERROR_LINK_NOT_DISABLED
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred when attempting to error disable an interface after a fault condition was detected on the interface by the UDLD protocol. This will result in the interface remaining up, when it should be shut down.), (Recommended Action: The link can be disabled manually by configuring shutdown on the port. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_PWM_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PWM bit level decoder error on decoder A on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-3-EVENT_CONN_MGR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-MISSING_OR_WRONG_ROLE_CONFIG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Services role configured. without this card will never come up.), (Recommended Action: Check hw role config ('show run | i hw-mod'). Configure correct role and reload the LC ('hw-module location <x/y/cpu0> reload').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_PM_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Satellite PM Failure (SAT_PM_FAIL) alarm is raised when there is a faulty power-supply assembly.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_TE_PREFIX_ADD
### Response:
(Severity: 4), (Category: ROUTING), (Description: The process encountered an error while sending a prefix to TE.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-2-REPLACE_BOARD
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This board is using a Discovery system controller and hence the board needs to be replaced.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-TX_ALARM_TAF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised possibly due to incorrect internal BITS transmitter configuration.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-HA_WAIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal cpp_ha_platform_wait_for_platform_state function still waiting for HA redy state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-TABLE_OPERATION_FAIL_GLACIAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_HW_OFFLOAD-4-MODE_CHANGE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: bfd hw offload mode changed, config will be activated only after a line card reset), (Recommended Action: config will be activated only after a line card reset. Reboot the LC during the next maintenance window.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-3-BAD_READ_WRITE
### Response:
(Severity: 3), (Category: MEDIA), (Description: Read/Write Failed), (Recommended Action: 'Check the Buffer Length')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_TOPO
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error encountered in RIP's topology module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-EDM_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP address withdrawal?
### Response:
To configure LDP address withdrawal, use the 'address withdraw' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#address withdraw
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-2-MODULE_WARNING
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Either a feed voltage out of limits warning, unit in current/power limit or over temperature warning condition.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_FIA
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The FIA Driver as requested the NP Driver to perform a hard reset as a recovery action for a FIA fault.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-UPGRADE_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The indicated FPD upgrade is not supported on this platform due to the reason displayed by the platform error message.), (Recommended Action: Follow the platform message to enable the FPD upgrade on this platform)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_A9K_LC_SVI-2-VQI_ERROR_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Unable to obtain VQI.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-2-ARCHIVE_THRESHOLD_CROSSED
### Response:
(Severity: 2), (Category: OS), (Description: Syslog archive size threshold crossed. Once the max size is reached, old archive files will be purged to make space for new ones.), (Recommended Action: None. However if purging of archive files (once max size is reached) is not desired then, create a backup of the archive files now OR increase the max size.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-MPLS_LABEL_LSD_RW_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Service-layer could not program the label in Label Switching Database.), (Recommended Action: Programming for label failed in Label Switching Database. This can occur if the ILM or NHLFE attributes are not proper - such as attempting to add a label before label block allocation. Look for Service Layer traces for more information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-DC_IDPROM_READ
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was not able to retrieve a valid IDPROM image from the daughtercard of the indicated location.), (Recommended Action: Use <CmdBold>hw-module location<noCmdBold> <CmdArg>location<NoCmdArg> <CmdBold>reload<noCmdBold> command to reset the card to see if it can clear any I2C issue that was preventing the reading of the IDPROM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the mutex synchronization mechanism?
### Response:
A mutex (mutual exclusion) lock is used to protect shared data. Before accessing the data, a thread must acquire the mutex. This blocks other threads from accessing the data simultaneously. When the thread is done, it releases the mutex, allowing other threads to acquire it. This prevents race conditions and data corruption.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_INVMGR-6-IF_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SFP or XFP or CFP or QSFP entity is removed from the line card.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_FIRMWARE_BOOT_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process either timed out while waiting for the switch's Microinit firmware initialization to complete, or the switch reported Microinit boot state as 'failed'. In order to recover, ESD will reset the switch, then exit so that it can be restarted by the process manager and attempt to configure the switch again.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet', and 'show controllers switch trace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different ways to clear BGP sessions?
### Response:
BGP sessions can be cleared in the following ways\n- Hard reset - Tears down the TCP session and re-establishes it. Disruptive.\n- Soft reconfiguration inbound - Performs a route refresh to get routes from the neighbor again. Requires storing a copy of received routes.\n- Route refresh - Performs a route refresh to get routes from the neighbor again. Requires route refresh capability.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-RETIMER_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The device failed, most likely reason is firmware download failed), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP if the asic is continuously reset and recovery does not take place after device reset: 1. 'show processes npu_drvr location <loc>' 2. 'show controllers npu retimer id all slot all' 3. Collect all traces: 'show controller npu trace all location <loc>' 4. dmesg and /var/log/messages from host OS If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FDI-3-ERR_TLV_TYPE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB/Driver received a FDI message containing structure(s) with invalid TLV type. This means that the TLV encoding code is missing some structure entry. After an occurence of such error, it is likely that FSDB and Driver have gone out of sync.), (Recommended Action: Capture information as specified in the required_info section. Restart FSDB/appropriate driver (from whichever process context this error message was logged) to clear any 'out of sync' issues.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process failed to initialize internal tracing buffers in the IGP/TE API DLL), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-VM_INSTALL_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: VM install/upgrade/unistall failure description.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-MEMORY_STATE_CHANGE
### Response:
(Severity: 4), (Category: HA), (Description: The free memory state of this node has changed to the indicated state.), (Recommended Action: If the free memory state is Severe or Critical, investigate memory usage on this node. It may be necessary to unconfigure some applications or move them to a different node. In the case of memory leaks, technical support may need to be contacted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-5-RECURSIVE_LOOP
### Response:
(Severity: 5), (Category: L2), (Description: Recursive loop was detected. The route update will be dropped), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system could not allocate memory for the specified function.), (Recommended Action: 'This indicates low memory condition, please try after freeing up some resources.' 'If this message recurs, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-ADDRSVR_INIT
### Response:
(Severity: 4), (Category: IP), (Description: Failed to initialize as local IP Address Server), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-BADELESIZE
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_9_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-REPLY_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: SysDB encountered an error while sending reply to its client.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-4-IP_ADDRESS_NOT_FOUND
### Response:
(Severity: 4), (Category: SECURITY), (Description: There is no IP address configured for the specified interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-SHMRESET_NON_RELOAD_SMU
### Response:
(Severity: 6), (Category: ROUTING), (Description: SMU installed has been designed to cause SHM reset without having to reload the router. Till fib_mgr initializes there will be impact on traffic.), (Recommended Action: None, since this is expected behavior of the SMU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-ERR_NETIO_MUTEX_LOCK
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 NetIO component was unable to lock packet mutex while doing a control action. The control action failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-CORRUPT_CHECKPOINT
### Response:
(Severity: 3), (Category: INSTALL), (Description: Checkpoint data for the Install process is corrupt. The data will be deleted and the install process restarted. Any information about any install operation that is in progress has been lost.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-7-GET_BCAST_ADDR_INFO
### Response:
(Severity: 7), (Category: OS), (Description: Unable to get the broadcast address %x- error code %s- Error description), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: IP), (Description: The Telnet client has encountered an error using the SysDB Library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-7-ERR_EDM_REGISTER
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-HFR library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_RX_ALIGN_LOSS_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Rx alignment loss on XAUI to NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-UPD_MSG_ALLOC_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error was encountered when allocating update message buffer. Update generation for the affected update-group will be retried after some time and will recover when the memory condition improves.), (Recommended Action: Please check the memory state on the router. Please also consider tuning the update limit parameters using 'update limit ...' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-1-SW_ERR
### Response:
(Severity: 1), (Category: L2), (Description: The operation is failed due to an internal software error. %d - instance. %s - description of the operation. %s - description of the error.), (Recommended Action: Check if the linecard reported any other errors. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show asic-errors plim asic <instance> all location <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show asic-errors plim asic <instance> all location <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. May need to restart process. 'process restart pla_cge_maint loc <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-ARRAYTOOBIG
### Response:
(Severity: 4), (Category: MGBL), (Description: The number of elements entered by user in an array are more than this application is designed to handle.), (Recommended Action: * RECUR *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-4-MEM_CRITICAL
### Response:
(Severity: 4), (Category: OS), (Description: If GSP process memory is in critical state it indicates that one of the internal queues is building up or there is a memory leak.), (Recommended Action: Collect running core dump of gsp)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-3-DAEMON_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The UDLD Daemon failed to initialize correctly, and will now exit. It should be restarted by SysMgr.), (Recommended Action: The UDLD Daemon will restart automatically in an attempt to resolve the error condition. The user may also be able to identify potential system-wide issues through the error string accompanying the message and attempt to resolve these issues to assist with UDLD Daemon restarts. If the error message indicates out of memory issues Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATMSNMP-3-SYSDB
### Response:
(Severity: 3), (Category: SNMP), (Description: This message indicates the ATM SNMP library fails to perform a SYSDB operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVC_NOTIFY
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: During initialization, PPPoE MA failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-ITAL_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured when registering to ITAL.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp | inc ital<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp | inc ital<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace events<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace events<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-HIGH_2_5VCC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high in 2.5Vcc voltage. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: This error is reported when malloc()/calloc() type system call fails.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-EVENT_CONN_NOTIFY
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to set notify handler for connection opens, closes and errors.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-OUT_MEM_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an output memory error on link 0), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-IFINDEX_GET
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error occurred when trying to get a numeric interface index value for the specified interface. Ietf nsf restart might fail.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-7-OPERATION_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a programmed diagnostic debug.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-ERR_BAG_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: EDM Bags are used to share information between components using sysdb. This Error indicates that bag registration failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TSEC-6-DRIVER_INFO_2REG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message gave an informative message with two register values. This is not a failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPDRIVER-3-SBM_IMEM_MULTIPLE_BIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that during initialization the SBM SPICO IMEM for the indicated ring and NP had uncorrectable bit errors in instruction memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does SysDB collaborate with Configuration Manager in IOS XR?
### Response:
SysDB collaborates with Configuration Manager in IOS XR by storing the configuration data and notifying relevant processes when configuration changes occur. Processes can register with SysDB to be notified of specific configuration changes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT-3-ERROR_LOG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, Tomahawk specific init error), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-JID_GET_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: process's JobID can not be obtained), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV6_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_15_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-SYSMGR_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: iq manager encountered an error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_ALL_PORTS_DOWN
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected that all ports on the indicated switch moved to down state. When this occurs, the switch is in an indeterminate state, and its packet processing functionality is disabled. In order to recover, the ESD process resets the switch, then exits so that it is restarted by the process manager.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-3-INIT
### Response:
(Severity: 3), (Category: OS), (Description: Initialization of FLOWTRAP process which is responsible for EPFT feature is failed to complete.), (Recommended Action: sysmgr will try to restart the FLOWTRAP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
uea-1-RESTART_NOT_SUPPORTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message in the DPA module to indicate that a process that doesn't support restart has been restarted (crash, CLI or SMU installation) Process will trigger node reload to recover after collecting required information in the linecard's disk), (Recommended Action: Please collect the core file and DPA traces from linecard's disk Ignore this if process was operationally restarted like process restart command or process restart SMU installation those operations are not supported yet and nothing to debug at this point)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-SNMP_TRAP
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to generate/send SNMP trap notification failed. It will also print reason of failure as well.), (Recommended Action: Collect following outputs: - show logging - show sonetmib trace location <> - debug snmp mib ifmib - debug snmp mib sonetmib - debug snmp mib ciscosonetmib)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-IMPLICIT_DOWNLOAD_FAIL
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: An error was repeatedly encountered while attempting to replicate the dataplane of an interface to a node to which it implicitly required replication (e.g. due to wildcard replication being used, and a new node coming up later). This may cause forwarding on this interface (via this node) to be broken.), (Recommended Action: The download will continue to be retried, so if the issue is transient and just taking a long time to clear then it will clear eventually and this message will stop appearing. If this message continues to be seen for a long time Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-6-ENFORCE_INC
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled with appropriate licenses.), (Recommended Action: 'INFO')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HOSTNAME_SYNC-3-SYSDB_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Could not bind to or register to sysdb), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-PCIE_TX_FIFO_MBE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-PFI_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the PFI-IFH module in the platform L2FIB BRIDGING component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-UNKNOWNTOKEN
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The parser token type is undefined in the specified tree'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Bulk Content Downloader (BCDL) service?
### Response:
BCDL is a service used to efficiently download large data sets, such as forwarding tables, from routing processes to line cards and fabric cards. It leverages GSP to provide reliable multicast transport. BCDL handles downloading data to multiple consumers, tracks download state, and performs incremental updates.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDP-7-SOCKET_INIT
### Response:
(Severity: 7), (Category: IP), (Description: An software error occured when the UDP process do socket related initialization.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-DATALIST_ADD_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-4-SVC_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: A service API warning is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-LKGP_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: The IS-IS process failed to configure link-group on the interface with specified error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-3-HUSHD_CAPI_CALL_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The capi service call to hushd to request for disk detach has failed. This means that the secondary disk partition for XR will not be passed through to XR and as a result the SDR prepare might fail.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-DB_SANITISATION_INTERRUPTION
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Ifmgr has detected an interruption in IM DB sanitisation, which may have happened due to previous ifmgr restart (can be user initiated or crash). ifmgr will try to recover this entry via resync now.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHANCON-3-MSG_TOO_LARGE
### Response:
(Severity: 3), (Category: OS), (Description: Connector poll returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CHASSIS_REIMAGE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Chassis wide reimage operation has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-NOMEMORYW
### Response:
(Severity: 4), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition but the problem has ben handled locally.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-STATS_EXCEED_RANGE
### Response:
(Severity: 7), (Category: SYSDB), (Description: Statistics update reveals the range has exceeded.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-2-CAL_CHIP_NMI_DISABLED
### Response:
(Severity: 2), (Category: MGBL), (Description: Unable to get NMI info from platform..), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-MONITOR_NOTIFICATION
### Response:
(Severity: 2), (Category: L2), (Description: This fault indicates a deadlock or inconsistent s/w state that npu_driver process has detected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOL_DEMB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-EVM_INIT_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to initialize the event manager due to the reason shown), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR auto-tunnel backup exclude-srlg feature?
### Response:
The MPLS TE FRR auto-tunnel backup exclude-srlg feature allows auto-tunnel backup tunnels to avoid using links that are part of the same SRLG (Shared Risk Link Group) as the protected interface. SRLGs define groups of links that share a common failure risk. By excluding SRLG links, backup tunnels can provide better protection against multiple correlated failures.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-DEBUG_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the TCP process try to do debug related initialization.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-3-UNKNOWN_EVENT
### Response:
(Severity: 3), (Category: L2), (Description: The system must be sending messages we didn't register for. They will be ignored.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_4_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_SPAWN
### Response:
(Severity: 3), (Category: IP), (Description: Internal error in spawning login child process.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-TFTP_TIMER_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process exited since initialization of the event manager to handle the timer expiry events failed.The process will respawn itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-CLOCK_GENERATOR_FAULT
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC FPGA detected fault on one of the Clock Generator device on the card. This is an indication Clock Generator reporting a failure condition: Loss of Signal, Loss of Lock or Holdover condition. This can result in card going to POWERED_OFF state if the fault is persistent.), (Recommended Action: Try reloading the card using 'hw-module location <> reload'. If multiple card reload operation cannot fix the problem, check if physical OIR can address the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-6-PERFMON_NOTSUPP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Processor Manager Linecard CPU driver doesn't support performance monitoring according to the specifications of the hardware.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may nbe rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-THREAD_CREATE_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper creates threads for various activities, here pthread_create failed to create a thread mentioned as start routine.This will have an impact on the behaviour of dumper. It will not impact traffic.), (Recommended Action: Please collect the following data and contact support 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An initialization error has occurred while trying to bring up the LC hardware in the platform ICPE_EA component. The platform software should recover automatically.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBDLLMGR-7-OVERFLOW
### Response:
(Severity: 7), (Category: OS), (Description: An overflow encountered for the process. This is not an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_12IN1-6-INVALID_CLOCKRATE_CLEAR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-RECORD_TOO_LONG
### Response:
(Severity: 7), (Category: OS), (Description: A feature record is too long.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-PROC_AVAILABLE
### Response:
(Severity: 3), (Category: OS), (Description: System manager process is not available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLDP-5-BRANCH_ADD
### Response:
(Severity: 5), (Category: ROUTING), (Description: A mLDP branch has been added.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_AIB_CONN
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) failed in an attempt to communicate with the Adjacency Information Base (AIB) process (aib). This is normally a transient problem that will correct itself. If the problem persists, forwarding of IPv6 packets may be impacted. Check that the AIB process is running and that it isn't being blocked by some other process. Also examine any other error messages arising alongside this one.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_INVALID_RESP
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encountered some invalid error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCM-2-IM_PVC_FAILED
### Response:
(Severity: 2), (Category: L2), (Description: PVC creation got failed . We may get this error if the connection with PVC does not exist or not ready.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. It is a PVC creation failure, try deleting and reapplying the pvc once again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-MIBCFGFAIL
### Response:
(Severity: 4), (Category: SNMP), (Description: While snmp startup sub-agents need to come up within 30 sec, if it happens in both active & standby nodes no issues will come, but if subagents not came up on active node and came up in standby node, mib related config verification will not validate by snmpd & active mibd so there was a chance to miss the mibd related config.), (Recommended Action: if mib related config not get effect re-apply the mibd's config. if Still notice error contact technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-DEBUG_DLL_HOOK_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-PEER_REACHABILITY_CLEAR
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has detected that the peer node has been restored and has attempted to recover the ports in the redundancy group.), (Recommended Action: This message may not require any action. However the <CmdBold>show l2vpn iccp-sm group number<NoCmdBold> command may be used to verify the state of the ICCP-SM bundles. Reference the L2VPN ICCP-SM section of the IOS XR documentation for details on core isolation failures and related configuration commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-CPU_STARVED
### Response:
(Severity: 6), (Category: L2), (Description: The Ethernet Link OAM Daemon has been blocked or starved of CPU time. As a result, it will not have been able to send out periodic heartbeats regularly, potentially causing OAM sessions to drop. The problem is likely due to unusually high load on the system.), (Recommended Action: Identify any potential high CPU users, and reduce their impact. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-COMMS_INIT_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: A failure occurred attempting to (re)initialize a necessary communication channel required by the ISSU Director. ISSU Director will restart itself and attempt to resync.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_CHKPT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error using the Checkpoint Service. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-7-FUNCTION_PATH
### Response:
(Severity: 7), (Category: OS), (Description: A function call returned an unexpcted error), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_5_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_0_XAUI_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from XAUI on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-2-ERR_EXT_MEM_MBE
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fabricq external memory MBE (multi-bit error).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-INVALID_ARG
### Response:
(Severity: 7), (Category: INSTALL), (Description: An internal error has occurred in an application that has caused it to pass invalid data to the Package infrastructure. The current request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR2_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-2 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ERR_ALM_API
### Response:
(Severity: 3), (Category: ROUTING), (Description: An ALM/LSD API returned an error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-APP_CLEANUP_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr has errored or failed while attempting to cleanup an application running on the previous active RP prior to switchover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-LOOPBACK_CONFIG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Loopback is not supported in OTN mode.), (Recommended Action: Use controller dwdm for loopback config. If loopback is not configured in suggested mode Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh processes vic location <> - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-3-CACHE_LOOKUP_NOT_PRESENT
### Response:
(Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_4_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CIH_LIB_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot initialize the Common Interrupt library infrastructure for interrupt and error handling and logging. The node might not be able to handle interrupts.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-DB_INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: CGN_MA failed to initialize a particular database. The process will be restarted under this scenario.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LMRIB_API-3-GENINITFAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred at client initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_ATOM-7-LTRACE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB ATOM component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_BILLING-3-CONFERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: Couldn't not establish the SBC instance name from SysDB. SBC instance name is required for the billing cach paths SBC billing application will not be able to save billing records.), (Recommended Action: Delete the SBC instance and create it again to mount the SBC billing drives.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-TUPLEUNPACK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'sysdb tuple unmask operation failed. The sysdb string is displyed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_UCORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory uncorrectable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-LINK_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. For Link in error state : This link is in error state due to errors on the link.), (Recommended Action: Reset the link. In most cases after reset of the link it should come UP fine. Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. show controller sfe link-info rx 0 127 topo instance all loc <loc> 2. Collect all traces:'show controller sfe trace all location <loc>' 3. Collect DSC and eyescan data for this link and also for the far end link If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-IP_RIB_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing updates to RIB. This error is unexpected and fatal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-GISO_ZTP_SYNC_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: An unexpected error occurred while trying to sync the gISO ztp.ini file from the active RP during diskboot. If ZTP configuration from a gISO is expected to be in use, this has not been synced to this node.), (Recommended Action: Use ZTP commands to check that ZTP configuration is as expected on this node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-3-BULK_SERVICE
### Response:
(Severity: 3), (Category: L2), (Description: vt_bulk_set_service failed while executing the function in question. The message contains information about the location and cause of the failure .), (Recommended Action: This error indicates a problem in the code and cannot be easily recovered from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_OPTICS_TEMP_OUT_OF_RANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-2-SESSION_COUNT
### Response:
(Severity: 2), (Category: SECURITY), (Description: Attempted to decrement session count which is already zero after a SSH session has been terminated.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_CONNECT-3-INTERNAL
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Connection library encountered an unexpected error during normal operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_PRC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from PRC.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RASF-7-DBGINIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: The debug event initialization failed. The rasf will still run correctly, but debug commands may be unavailable.), (Recommended Action: There is no effect on functionality Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-FGID_JOIN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FGID join failed. Packet path initialization to RP errored.), (Recommended Action: Restart the spio_ma process. 'process restart spio_ma location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPMgr-3-ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error message), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-EVM_CODE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external event manager function failed. The impact of this error is insignificant, unless the error condition persists for a duration close to the minimal DeadInterval used over all OSPF interfaces.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-MISSING_NODE_NFN
### Response:
(Severity: 7), (Category: SYSDB), (Description: No node down notification was received from the underlying infrastructure for a recent node reload.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_AB_INTR_FIFO_URUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_AB_INTR_FIFO_URUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_MEM_NHPATH
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured when trying to clear redist information for a client.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-3-MILESTONE_COMM_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: ISSU Lite returned an error when the process tried to inform it that the a milestone had been started/met. The error messgage will contain more information. This may stop the process from declaring itself ISSU ready and may cause the ISSU to abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-NP_PLL_LOCK_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a clock failure on NP), (Recommended Action: Please check power slice shut/no shut recovers the issue if the issue is persistant ,reload the LC hw-module location reload 0/x force if the issue is seen even after LC reload,RMA LC If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-REGISTRATION
### Response:
(Severity: 7), (Category: HA), (Description: An error was encountered during table registration. The message should indicate the error condition. This is most likely due to a coding error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-TOP_SHMEM_USER_INFO
### Response:
(Severity: 6), (Category: HA), (Description: This process is one of the top sharedmemory users in the system. If the system reaches critical memory exhaustion, this process is subject to restart or termination. If the process is listed as 'Killed', then the system is in the process of recovering the resources used by the process.), (Recommended Action: Collect system log information. Contact technical support if the problem is not a misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-6-INFO_FGID_RECOVERY
### Response:
(Severity: 6), (Category: FABRIC), (Description: FGID high watermark level crossed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_INVALID_MSG
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encountered invalid LWM message received .), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize or shutdown the debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_FMI_IFH_MISMATCH
### Response:
(Severity: 4), (Category: SECURITY), (Description: The Firewall Controller has been informed of the creation of a Firewall Management Interface, but found that the interface handle for the interface differs from the handle in its database. This error message indicates an inconsistency in the firewall database, which may result in unexpected behaviour.), (Recommended Action: If this message is seen and the state of firewalls on the router does not match the expected state as a result of configuration, restart the Firewall Controller process using the 'process restart' mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-AGENT_REG_SUCCESS
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing registration successful.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TTI_MISMATCH_DEMC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-DIAG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Network Processor experienced a self diagnostic error in operation. The error is automatically recovered via self healing NP fast reset. Minor loss of traffic is expected during recovery.), (Recommended Action: If infrequent this can be ignored. If the problem persists logs are kept automatically for Cisco to analyze. Call your next level of support if this is seen twice in a week.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LOW_VOLTAGE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ voltage less than or equal to the low voltage warning threshold. The QSFP+ is the pluggable optics on the line cards. The voltage threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-NM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed NM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB_API-3-LWM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred in mrib client lib.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_GENERIC
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-LICENSE_WILL_EXPIRE
### Response:
(Severity: 4), (Category: LICENSE), (Description: The specified feature's evaluation license will expire in the time indicated. After the license has expired the feature will become unusable. This message appears even if the feature is not currently configured.), (Recommended Action: In order to continue using the feature, contact Cisco to purchase a permanent licenses and install it using the 'license add' command in admin mode. If the license is not needed, the messages can be stopped by removing all licenses for that feature using the 'license remove' command in admin mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-BAG
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an error using the Bag Client library. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error. The error will affect ELMI's ability to provide operational management data, but won't otherwise affect ELMI's operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ED_SCH_INTR_MC_QTYPE_HANG_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ED_SCH_INTR_MC_QTYPE_HANG interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-SHMEM_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Shared memory operation failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAR_ALIGN_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 char alignment error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_SCH_LIB-3-EVM_CREATE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message signifies that the communication between that the event-creation manager has failed in context with the Smart-Call-Home feature.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-5-TAM_DBG_PROC
### Response:
(Severity: 5), (Category: SECURITY), (Description: Internal TAM debugging related error which limits TAM debuggability.), (Recommended Action: TAM internal debugging related error has occured which limits debuggability of TAM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOGMIB-3-TARGET_CFG_PROBLEM
### Response:
(Severity: 3), (Category: SNMP), (Description: An internal software error occurred.), (Recommended Action: Collect Show tech-support cfgmgr on the location where this error is seen also collect show config sessions detail, show config history reverse, show cfgmgr trace location all and show logging output .)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-ROUTE_RECONCILIATION_COMPLETE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: System is booting in warm mode and was resynchronizing routes with the ASIC. Re-conciliation is now complete and configuration can now be done.), (Recommended Action: No recovery is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBAPI-3-NOMEM_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: The requested operation could not be performed due to a low memory condition.), (Recommended Action: 'Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: MGBL), (Description: 'An error occurred while accessing sysdb. The error is displayed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-5-DIA_PEER_DOWN
### Response:
(Severity: 5), (Category: SECURITY), (Description: Error encountered while using the System Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-SHM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Error occurred in operations related to Shared Memory area. Initialization of the server side of shared memory failed. This could have happened due to overuse of memory. This results in - 1) Not programming hardware for proper forwarding. 2) Not creating new bridge.), (Recommended Action: To minimize the scaling of bridges, some processes that provide unnecessary services can be removed from the configs. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_DETAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NQC-3-INIT_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: An software error occurred while initializing the NSR FAIL OVER functionality. If this occurred during process startup, then the process may be restarted.), (Recommended Action: The process may attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-INVALID_SLOT_BUS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-CONFIG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_2_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KENSHO_GL-3-PCIE_ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: pcie attach has failed and process will respawn), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still non-operational, execute 'process restart procmgr location <>'. If the process still fails to spawn, contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_BAG_DECODE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-ACTOR_CHURN
### Response:
(Severity: 5), (Category: L2), (Description: Actor churn has either been detected (due to the failure of a link to synchronize soon enough) or has been cleared. If the link is in Standby state, then actor churn will be detected after the churn timeout; this is expected behavior. Otherwise, this indicates a possible misconfiguration.), (Recommended Action: If actor churn has been declared and the link is not marked as Standby, check that the configuration for the link allows it to aggregate, and fix as appropriate. Check for misconfigurations between the two ends of the link which is reporting churn. The output of the <CmdBold>show bundle<noCmdBold> command may help identify the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-EVENT_CONN_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to create event connection.), (Recommended Action: The process may recover itself from this error as there is a retry mechanism. If the issue is seen continuously, Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO_COMMON-4-VERIFY_INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The process has failed to initialize a module, and will be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_ENCAP_DB-2-NH_NOTVALID_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: NH has not been inserted in AVL tree. Valid bit not set), (Recommended Action: The following needs to be collected and DE team to be contacted. show encap-id platform egress-db all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_CLOCKTIME
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while retrieving the time of a System Clock. This may be due to resource starvation or an internal software programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install verify filesystem command in IOS XR?
### Response:
The 'install verify filesystem' command is used to verify the integrity of the filesystem on the router's storage devices. It checks for any filesystem corruption or inconsistencies and reports any issues found.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-ISSU_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Fatal error in one of the ISSU apis.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-3-CONFIG_ERROR_CLEAR
### Response:
(Severity: 3), (Category: L2), (Description: Mis-configuration under l2vpn redundancy has been cleared. The primary set of VLANs now matches the secondary set of VLANs on the other member of the redundancy group.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-4-INTERFACE_EXIST
### Response:
(Severity: 4), (Category: IP), (Description: IPv4 MA already has the interface being newly added in its internal store. This potentially indicates that IPv4 MA missed the delete from SysDB and Interface Manager for this interface & hence is out of sync.), (Recommended Action: IPv4 MA restarts in an attempt to recover from this situation, config should get applied on this new interface successfully. No further action should be necessary. If errors are observed, trying to unconfigure and reconfigure the interface in problem would help. If that does not and IPv4 MA related errors are still observed please gather the necessary information as mentioned in required info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-WARNING_STR
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv6 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|ipv6] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-TRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS failed to init with the ltrace subsystem. This affects the debuggability of the component. CLNS will attempt to restart to recover from the situtation.), (Recommended Action: Please contact cisco-support in case the message re-occur. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-4-DLL_REG_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The given cerrno dll could not be marked for use. This does not change the functionality of the system but does obscure the meaning of error codes presented by this part of the system.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_DATA_FIFO_OFLOW_0_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg data fifo overflow on xaui-0 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_PKT_MINLEN_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
hytop-6-INFO_MSG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is a Informational message in the QFPCPUBridge driver %s - indicates the informational message. %d - indicates any additiona data.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: PLATFORM IPv6 FIB, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-OOR_COUNTER_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-LASER_ON_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Operation of turning on the Laser for Coherent Optics Failed), (Recommended Action: As a workaround Optics controller can be admin shut and no shut to attempt recovery)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-BPDU_INCORRECT_DMAC
### Response:
(Severity: 3), (Category: L2), (Description: STP received a BPDU with the wrong MAC address, most likely belonging to a different protocol.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-BER_ALARM
### Response:
(Severity: 4), (Category: L2), (Description: Warning Alarm is raised due to BIP Error Threshold Violation Interface is brought down, if user has configured it. %s - Interface Name. %s - BER Type. %s - Alarm state.), (Recommended Action: Correct the far end or fiber path for this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_GLOBAL_BSR_GRANGE_THRESHOLD_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-4-ROLE_MISMATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The role configuration determines the type of service ISM card is going to run. This message is generally encounterd in the cases of RMA or location change of ISM card. It means that the ISM card is not running the service which it is expected to run.), (Recommended Action: Install the image specified by configured role on ISM card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_CCEICT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IDB_HANDLE_MISMATCH_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp global-interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp global-interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL_SHM-7-ERR_GENERAL
### Response:
(Severity: 7), (Category: OS), (Description: Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-3-UNEXPECTED_ERROR
### Response:
(Severity: 3), (Category: HA), (Description: An unexpected error condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVENTORY_DB_INTEGRITY_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Duplicate entries found in inventory database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIP-4-NOT_SUPP
### Response:
(Severity: 4), (Category: L2), (Description: The specified configuration is not supported by the dataplane.), (Recommended Action: If any problems are seen, they may be rectified by removing the unsupported configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_FDB_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected that the indicated switch did not respond to a request to clear or modify the switch's forwarding database (FDB). When this occurs, the switch is in an indeterminate state, and its packet processing functionality is disabled. In order to recover, the ESD process resets the switch, then exits so that it is restarted by the process manager.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_PKT_MINLEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_15_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key steps to prepare for an IOS XR software installation?
### Response:
The key preparation steps for an IOS XR software installation are\n1. Identify the desired IOS XR release version based on required features and functionality\n2. Determine the necessary SMUs and optional packages to be installed\n3. Verify the hardware (RP, LC) meets the memory and boot device requirements\n4. Procure the bootable image, optional packages and SMUs from Cisco\n5. Ensure management access to the router (console, Telnet/SSH)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_BKP_ID_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the auto-tunnel backup aborted since all IDs in the auto-tunnel backup ID range have already been allocated.), (Recommended Action: Increase the auto-tunnel backup ID range or remove unused auto-tunnel configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-4-MISSING_DOCK_INFO
### Response:
(Severity: 4), (Category: ROUTING), (Description: This is most likely an internal logic error that resulted in a given ora docking being released more than once.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_EA_STATS-3-CHKPT_GET_FAILURE
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error occured during periodic statistics collection for the interface specified. This means that the statistics (as reported by eg. 'show interface') will be inaccurate for as long as this error is seen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-OUT_OF_RANGE_ID
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Out of range IDs used for port ranges in ACL match criteria.), (Recommended Action: Remove the port range match criteria from ACL and re-apply.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_INTERR
### Response:
(Severity: 5), (Category: SYSDB), (Description: The code has performed an action which should not be possible.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-4-DUMPER_SNAP_NODUMP
### Response:
(Severity: 4), (Category: OS), (Description: A non-invasive voluntary coredump was requested by the process, but a problem occured that prevented the coredump from being created.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_ASIC_SCAN_UNSUPPORTED
### Response:
(Severity: 3), (Category: FABRIC), (Description: SPB is not designed for supporting SPB-motherboard JTAG operation necessary for asic scan functionality. SPB board with this support will have a 73 level base number of 12773. This value is programmed in the SPB EEPROM at locations 42 to 44.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-AD9554_CLOCK_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AD9554 clock failure/success.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_MALLOC
### Response:
(Severity: 3), (Category: OS), (Description: The requested memory is not available), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-SYS_UPGRADE_INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: This may not be a failure, but the information about the progress of the install operation. This message will be sent by the Admin install manager to update on the progress of the system upgrade operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MGMT_TOO_MANY_VALUES
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Management Commands Process has been supplied with more values on the command line than it was expecting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-4-EXIT_NNS_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: The Linux Packet Classifier operates in different Linux Network Namespaces, each corresponding to a separate IOS-XR VRF. This message indicates it encountered an error exiting from one of those network namespaces after its work there was complete, and so is now stuck in the wrong namespace. This may affect operation of the Linux datapath, but the standard IOS-XR datapath will not be affected.), (Recommended Action: If Linux datapath operation is important, then a process restart of the spp process (a traffic impacting operation) is necessary to recover. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-NSR_SM_TIMEOUT
### Response:
(Severity: 3), (Category: L2), (Description: BFD NSR Sync SM timed out because of state timer expiry.), (Recommended Action: Restart corresponding bfd process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-7-HBAGENT_EXISTS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Mbi-hello process was restarted. However, it detected that the hbagent process is already functioning. Hence mbi-hello is going into passive mode by design.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-7-UNKNOWN_MESSAGE
### Response:
(Severity: 7), (Category: IP), (Description: The IPV4_MA process has received an unknown IPC. It will ignore the msg if it is in the form of an asynchronous pulse. If the msg is in the form of a synchronous message, it returns an error to the sender which in turn is expected to take appropriate action. This can happen if IPv4 MA receives an IPC for which it doesn't have a handler registered due to either it unregistering the handler without updating the sender or due to the sender sending an incorrect IPC. It may be safe to ignore this message if there is no visible loss of functionality.), (Recommended Action: Collect the output of show tech-support, show processes, show ipv4 ma trace, show lwm from the location the error message comes from. If this message is seen repeatedly, capture the output of debug event-manager dispatch job <>. This debug captures almost all the IPCs received by ipv4 ma and hence it may slow down the process and take up the related resources. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-6-ERR_EVQ_DESTROY
### Response:
(Severity: 6), (Category: L2), (Description: During process termination PPP MA failed to destroy an event queue. The process will terminate regardless so there should be no lasting problems.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-5-RP_MAPPING_CHG
### Response:
(Severity: 5), (Category: ROUTING), (Description: PIM RP mapping change notificaiton.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-3-DRV_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA driver driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (vpa_1_oc192) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_MCAST_GTRIE-3-LEAF_LOOKUP_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error in platform Gtrie Lib), (Recommended Action: Please collect debug multicast-gtrie <> for analysis on the cause If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE_HAL-3-DOUBLE_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An access error happenned on Squirt or PEX8114 while checking for errors.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE5_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE5_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens when you delete a physical interface configuration in IOS XR?
### Response:
When you delete a physical interface configuration in IOS XR, the system automatically removes all configuration associated with that interface, such as IP addresses, routing protocol configuration, and QoS settings. This simplifies interface removal and ensures consistency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-TDDR_FIFO1_PAR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: TxDDR 200 to 1875 FIFO 1 parity error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-CHASSIS_OVERTEMP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Chassis ambient temperature is over critical threshold. Ambient temperature is the average of the temperature inlet sensor for all RSP plugged in the chassis.), (Recommended Action: Verify the failure, give CLI: (admin)# show env --> particularly temperature and fan output (admin)# show env trace --> to see cards STT values (exec)# show env led details Verify the fan speeds have increased to help bring down the temperature, ambient temperature should decrease with the increased fan RPMs. Chassis can continue to operate in this condition, however cards will shutdown when their hotspot temperature reaches shutdown threshold (STT).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_LIB-3-LTRACE_NODE_ID_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace node IDs for logging the info/debugging information is failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-WRONG_PLANE
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens API , it returned failure. ens_bulk_register API failed.), (Recommended Action: This is a debug message.No Action required. If problem persists,Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_DETAILS
### Response:
(Severity: 3), (Category: SECURITY), (Description: Client address, error, error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DEBUG_CERR-7-REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: The debug library was unable to register its debug specific condition codes. Condition messages from the debug library are likely to be degraded.), (Recommended Action: Check to see if sufficient memory resources remain for normal operations. Add memory if necessary. Verify the installation of the debug library. Re-load if required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-3-MUTEX_REVIVAL
### Response:
(Severity: 3), (Category: OS), (Description: New service can't be registered due to other infrastructure issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-RECVFROM
### Response:
(Severity: 3), (Category: L2), (Description: The socket call recvfrom returned an error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_CKTNUM_ALLOC_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to allocate a circuit ID to the specified LAN interface.), (Recommended Action: Reduce the number of LAN interfaces over which IS-IS is running.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-ERR_CLIENT_REG
### Response:
(Severity: 3), (Category: L2), (Description: An internal error was detected while clients are registering to Egressq process.), (Recommended Action: No action is required. Clients will automatically retry to connect to Egressq. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-LWM_2_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-0-RX_PLL_NOT_LOCKED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: RX PLL inside the FPGA device is not locked.), (Recommended Action: The software is not able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-EVM_TM_ATTACH
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to allocate a timer object.When this issue happens, it will trigger an automatic restart of pifibm_server_lc process..), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR auto-tunnel backup exclude-srlg feature?
### Response:
The MPLS TE FRR auto-tunnel backup exclude-srlg feature allows auto-tunnel backup tunnels to avoid using links that are part of the same SRLG (Shared Risk Link Group) as the protected interface. SRLGs define groups of links that share a common failure risk. By excluding SRLG links, backup tunnels can provide better protection against multiple correlated failures.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-7-ERR_DEBUG
### Response:
(Severity: 7), (Category: MGBL), (Description: 'Debug event logic failed. The reporting function is listed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-3-PIO_MMAP_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An error occured as memory map failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-BAD_FPD_IMAGE
### Response:
(Severity: 3), (Category: DRIVER), (Description: The indicated FPD image in CCC bootflash does not appear to have a valid meta-data. This means that a previous FPD upgrade operation did not finish the programming operation of the image.), (Recommended Action: Run again the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVQ_CREATE
### Response:
(Severity: 4), (Category: L2), (Description: This is an unexpected error. The PPP MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-5-OOR_GREEN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Device has come out of severe resource constraint state), (Recommended Action: Please collect the OFA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVC_CLOSE
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA failed to close a connection to an essential service. This is an internal error and it requires a restart of the process for recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-3-INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: RSVP could not initialize one or more modules), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-SET_DWDM_CARRIER_CH
### Response:
(Severity: 6), (Category: L2), (Description: Optics Controller has provisioned optics to [HW Default | Configured | GMPLS Signaled] DWDM Carrier Channel.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_SSTAR-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Fabric driver was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-6-INVALID_REQUEST
### Response:
(Severity: 6), (Category: OS), (Description: There is miuse of library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-THIRDPARTY_PKG_IN_LIST_NOT_VALID_FOR_SDR
### Response:
(Severity: 3), (Category: INFRA), (Description: Thirdparty pkg in initial-image is not valid for SDR. Invalid input.), (Recommended Action: Skim through the input list again and include relevant thirdparty rpm for SDR.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-DATABASE_CORRUPTED
### Response:
(Severity: 3), (Category: QOS), (Description: The SSE QoS EA module encountered a database corruption error. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-MALLOC_FAIL1
### Response:
(Severity: 3), (Category: L2), (Description: Memory allocation for shim window failed as the identifier is not valid.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-6-ERR_IM_MULTIPLE_NTFCNS
### Response:
(Severity: 6), (Category: L2), (Description: A batch from Interface Manager contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the cHDLC MA. No problems should be seen as a result.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_MUTEX_REVIVE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in stats infra component. The mutex could not be revived.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal software error has occurred for SIM SW infrastructure.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-LOCAL_CARD_IDPROM_READ_FAIL
### Response:
(Severity: 3), (Category: DRIVER), (Description: This is a message to notify the user that RP IDPROM read failed and FAKE generated info is used.), (Recommended Action: This is an indication on HW failure and will need RMA of the board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_CPP_DATA_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EBS to CPP packet data single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-ISSU_NFN_REG_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to register for ISSU Install notification registration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Failed to allocate memory from Heap. This can happen during periods of intense memory resource usage or due to a memory leak - though these are extremely rare occurances. This message implies some message(s) between FSDB and SFE driver was not processed and so they might be out of sync.), (Recommended Action: Capture information as specified in the required_info section. Restart sfe_drvr to clear any out of sync issues. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-OPEN_SOCK_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Open of socket failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-7-HA_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: HA related error occurred in Services PLIM driver. Cause of the error will be mentioned in the message displayed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option verbatim feature?
### Response:
The MPLS TE path-option verbatim feature disables the default behavior of automatically assigning IP addresses to unnumbered interfaces in an explicit path. With verbatim, the explicit path is used exactly as configured without modification. This is useful when the automatic IP address assignment conflicts with intended explicit paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-2-RESOURCE_DOWN
### Response:
(Severity: 2), (Category: OS), (Description: An important resource required to perform an operation was unavailable.), (Recommended Action: Resource Managers: VRF Database: rsi_master Interface Database: ifmgr Please check if the resource managers are running. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when registering debug. This is not a critical error, and the process can continue functioning noramlly despite this failure. Particular debug will not be effective though.), (Recommended Action: Provide the following log: Collect Console logs and output of -show logging process pifibm_server_rp loc <active RP>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-INCOMING_QUEUE_FULL
### Response:
(Severity: 4), (Category: SNMP), (Description: SNMP trap correlation incoming queue is full; traps already in the queue is emitted on a FIFO basis to free up room for more incoming traps), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_MAIN-4-CLOCK_ACCURACY_UNSUPPORTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The system timing has switched to enhanced accuracy mode as a result of applying the 'timing-accuracy enhanced' configuration. This accuracy mode is not supported on the line cards mentioned in the message. The timing behaviour on these line cards shall be undefined if the system continues in this mode.), (Recommended Action: Replace the line cards in the message with the ones that support enhanced timing accuracy, or remove the 'timing-accuracy enhanced' configuration and reload the router for changes to take effect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV4_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-INIT
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the Service Virtual Interface infrastructure. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UT2-7-ERR_MSG
### Response:
(Severity: 7), (Category: L1), (Description: ut2 driver might run into an error that is not a FATAL.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-IMAGE_COPIED
### Response:
(Severity: 6), (Category: INFRA), (Description: Copied image to start pre-provision actions), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRMS-3-INT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SRMS internal error. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Restart SRMS process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
c2c_pif-3-ERR_SW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The C2C PIF library encountered an error which it cannot resolve.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: A init failure occurred in CPP Driver which involves exiting the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-FATAL_2
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: eint encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-4-DEADLINE_MONITOR_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Process failed to register with deadline monitor which indicates that the process will not be monitored by wd-critmon.), (Recommended Action: Process showing up this message needs to be restarted to recover. Command to restart the process, - 'process restart <process_name> location <location>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering auto-tunnel primary feature?
### Response:
The MPLS traffic engineering auto-tunnel primary feature allows point-to-point MPLS TE primary tunnels to be created dynamically between tunnel head-end and tail-end routers. It reduces configuration compared to manually configuring TE tunnels. It is enabled with the mpls traffic-eng auto-tunnel primary command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AMT-3-SYSDB_BSCAN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_P2MP_SRVR-3-LTRACE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Encountered an error in tracing module. This error should not impact the major functionality of the module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_INTF_IFH_MISMATCH
### Response:
(Severity: 4), (Category: SECURITY), (Description: The Firewall Controller has been informed of diversion creation for an interface, but found that the interface handle for the diversion differs from the handle in its database. This error message indicates an inconsistency in the firewall database, which may result in unexpected behaviour.), (Recommended Action: If this message is seen and the state of firewalls on the router does not match the expected state as a result of configuration, restart the Firewall Controller process using the 'process restart' mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ZERO_TIMER_REPEATEDLY_EXPIRING_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The deadtimer expiry event repeatedly occured with a deadtime value of zero. This could lead to cpu hogging by radiusd process.), (Recommended Action: Restarting radiusd process should get around the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_PRINT_OPTION
### Response:
(Severity: 7), (Category: MGBL), (Description: Printing option entered in command line.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCDMA-3-ERR_SYSDB_EDM_REG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl Sysdb Register EDM error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP IGP sync feature?
### Response:
The MPLS LDP IGP sync feature ensures that LDP is fully operational on a link before the link is used for IP forwarding. It prevents blackholing of traffic while LDP convergence is still ongoing. The IGP advertises the link only after LDP is converged. It is enabled per-interface with the mpls ldp sync command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_VKG-7-ERR_GEN
### Response:
(Severity: 7), (Category: ROUTING), (Description: MFWD-ASR9K library encountered error during setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-7-ERR_RSC_REG_INCONSISTENT_VALUE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric statistics server process encountered a transient error due to the inconsistent value of the received message. This error message will be a true error if many error message is logged and the error is persistent.), (Recommended Action: If the error continues, user will need to restart the process for recovery. 'process restart fstats_server <location> ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-EDM_DATALIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_ATTR_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: A call to the IM attribute library failed. This can be caused by faulty hardware, or it may indicate an interface resource is currently unavailable. Recovery may require a restart of the IS-IS process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IPHC
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error communicating with IPHC MA. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the IPHC MA, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the significance of the 'install update' command in Cisco IOS XR?
### Response:
The 'install update' command in Cisco IOS XR is used to apply interim software updates, such as bug fixes and security patches, to the active software packages.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_5_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-NO_POLICY_FOUND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to derive peer key through either of the following ways: pre-shared keys, RSA keys, or certiifcates. Applies only to initiator mode.), (Recommended Action: 'Contact administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: IP), (Description: The Multicast Port Arbitrator failed to allocate memory.), (Recommended Action: The system is running low on memory, if there is lots of config/routes, try reducing it. Do the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If there isn't too much config, then do the following action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_IFH_UIDB_INDEX
### Response:
(Severity: 3), (Category: OS), (Description: Failed to find uidb index for an given interface handle. It is likely to be caused by a programming bug or a programming problem happened in the past.), (Recommended Action: Run the command 'show uidb index' to verify whether the uidb index is created for the interface. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-BAD_RSVP_MSG_RCVD_AUTH_SEQ
### Response:
(Severity: 5), (Category: ROUTING), (Description: The router received an RSVP message with a bad authentication sequence number. It may be possible in some cases that bursts of RSVP messages become re-ordered between RSVP neighbors. It may also be possible that an attack was attempted.), (Recommended Action: If this occurs on a regular basis, and you can verify that the node sending the burst of messages is trusted, use the window-size option to allow for the burst size such that RSVP will not discard such reordered bursts.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-BAD_GROUP_MSG
### Response:
(Severity: 4), (Category: ROUTING), (Description: The rpl multi-version coordinator received a message with a type it did not recognize. The message was ignored.), (Recommended Action: Observe system for other failures contact support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_OC768-3-CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: PLIM OC768 driver encountered a critical error as described in the error message. This error causes PLIM OC768 process to exit.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PREF_COMPR_LIB-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error occurred in IPv6 Prefix Compression library involves exiting the process. After the associated process restarts, the error should have been cleared. *DDTS*), (Recommended Action: Collect the configuration, syslog and coredump file. Attach them to the ddts. After the process restarts automatically, the error should have been cleared and no user action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-DEBUG_REGISTER_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS failed to register with the debugging subsystem. If this message has been generated then CLNS debugging may not be available. This may be a system resource problem.), (Recommended Action: In case this message is seen multiple times then please contact cisco-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-CREATE_VIRT_INST_ENTRY
### Response:
(Severity: 3), (Category: OS), (Description: The request to create a DB entry for the named virtual service failed.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-MA_ALLOC
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that the pbr_ma process has failed to allocate memory. This may be due to low memory conditions on this particular node, or pbr_ma may be using more memory than it is allowed.), (Recommended Action: Reduce system scale. If the problem persists even with reduced system scale, please contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-ERR
### Response:
(Severity: 3), (Category: L2), (Description: Plim asic driver errors. Typically these errors indicate failure in system services or bad programming of the hardware.), (Recommended Action: Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM_API-3-LOCKING_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: bfm encountered an error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-BREAKOUT_UNSUPPORTED_HW
### Response:
(Severity: 2), (Category: L2), (Description: The breakout mode is not supported on the hardware . The behavior of interfaces created is undeterministic.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-7-CAST_PKTS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: %u- No of packets of unicast or multicast.. %s- Packets of type unicast or multicast.), (Recommended Action: debug info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-TCAM_LIMIT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This message will typically occur when permissible single region size is exceeded or total number of entries allowed in TCAM for a given application is exceeded.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-3-LOG_ERR
### Response:
(Severity: 3), (Category: OS), (Description: An Error message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_0_FIA_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error - 0 from FIA on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-7-DEVICE_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checkpointing is a mechanism to update the redundant RSP with the current configuration and status of the system to help takeover in case of a failover. The checkpoint mechanism needs to be initialized for Sync-controller to update the standby RSP with current frequency syncronization status.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-3-REPEATED_TIMESTAMP_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: In order to know when to perform updates to the UTC offset, PTP requires knowledge of the current PTP timestamp from the hardware. This error indicates that attempts to obtain this timestamp have failed repeatedly.), (Recommended Action: This error potentially suggests a problem with the hardware. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-6-LOCAL_CMD_ACCT
### Response:
(Severity: 6), (Category: SECURITY), (Description: Local command accounting for CLIs), (Recommended Action: Added as part of new feature to account all clis)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-6-TEMP_READ_ERR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational msg indicating invalid temperature read), (Recommended Action: Software will take corrective action on its own. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-ARM_UPDATE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp global-interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp global-interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace iparm error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace iparm error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp interface<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp interface<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP next-hop-self command?
### Response:
The next-hop-self command causes BGP to advertise itself as the next hop for advertised routes. It is commonly used on iBGP peerings to ensure that the iBGP peer uses the local router as the next hop instead of an eBGP router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT1_CRC
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP CRC error on the HT1 interface.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-INVALID_DMAC
### Response:
(Severity: 3), (Category: L2), (Description: The destination MAC address of the incoming MRPDU does not match the MAC address expected for this interface. The specific MRPDU will be dropped and the protocol will continue to operate.), (Recommended Action: Use wireshark or another similar tool to verify the destination MAC address of the packet on the wire. Check the received MAC address against other MAC addresses on the device since there may be a possible packet path issue. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-3-DLL_CERRNO
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-UNSUPPORTED_OOM_STATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: A memory state transition notification was received from wdsysmon with an invalid state.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while attempting to create an event manager. This failures affects the ability of the process to service various messages / pulses from other threads / processes. This facility is deemed crucial and the process automatically restarts on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_EVENTFIND
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MULTILINK_UV-3-ERR_MISCONFIG
### Response:
(Severity: 3), (Category: L2), (Description: The Multilink Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.), (Recommended Action: The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_SHOW_PROTO_REG
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register for notification of changes on the displayed SysDB path. The error will not affect IS-IS operation but does indicate unexpected system behavior.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath as-path ignore' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath as-path ignore' command is used to ignore the AS path length when selecting the best path. By default, BGP prefers the path with the shortest AS path length. This command disables that behavior, allowing the selection of a path with a longer AS path if it is better in other attributes such as origin or MED.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-PREFPATH_MULTIHOME_UNSUPPORTED
### Response:
(Severity: 4), (Category: L2), (Description: EVPN-VPWS with static preferred path configuration is only supported for single-home setups. Received an internal label with a nexthop not associated with EVPN-VPWS single-homing.), (Recommended Action: Unconfigure the pseudowire class which applies to services other than single-homed EVPN-VPWS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE2_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE2_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_NEG_INCOMP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: API Version negotiation failed due to incompatible version.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-ILMS_DROPPED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A synchronous ILM operation request received when server initialized in asynchronous mode or vice versa; or when server is not ready.), (Recommended Action: Controller and/or agent must ensure that ILM operation requests are sent only in the mode specified by the client initialization message and server is ready. If message is still seen after meeting these conditions, contact Cisco for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-INTERFACE_DB
### Response:
(Severity: 3), (Category: ROUTING), (Description: The rib unexpectedly failed to update the interface -> IP address database.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_CRP-3-TIMER_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Timer Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_candidate-rp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_candidate-rp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-ERR_INVALID_GROUP
### Response:
(Severity: 3), (Category: SECURITY), (Description: AAA failed to recognize the specified server group name. It may be undefined.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-7-DEBUG_MISSED_HEARTBEAT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Heartbeats over control-ethernet from the node in question are being missed. Continous meesages usually indicate a CE transport issue. Please check control ethernet connections to and from the node in question), (Recommended Action: If continous messages seen, do the following: Check dsc process state from node in question Check the control ethernet connectivity to the node. (Check if the cables are okay and also if the switch is operating normally). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Tx power less than or equal to the low Tx power alarm threshold. The SFP is the pluggable optics on the line cards. The Tx power threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Replace the SFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-TREE_LOCK_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while locking a mutex.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_PW-3-UPDOWN
### Response:
(Severity: 3), (Category: L2), (Description: L2VPN Pseudowire state is changed to UP or DOWN), (Recommended Action: If the state change was unexpected, verify the configuration settings for the cross-connect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_CHKPT_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver failed to register the checkpoint table. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-GET_SHIM_INFO_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Could not get shim info for given interface handle), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC4
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_RINFO
### Response:
(Severity: 3), (Category: OS), (Description: A call to a group services rinfo function failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-5-ANCHORCOUNT
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error in the flow control algorithm in EIGRP. EIGRP may recover itself temporarily by doing the necessary error handling.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_NOTIFICATION_SOURCE_STATE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When a BITS source port goes up or down this notification will come.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_NOFILE
### Response:
(Severity: 5), (Category: SYSDB), (Description: The instruction file specified when Sysdbcon was started cannot be found. The most probable reason is that an incorrect name was supplied.), (Recommended Action: Check that the file name supplied was correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-EDM_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace sysdb error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace sysdb error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sysdb trace edm location all<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sysdb trace edm location all<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-CONNECTION_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A peer has incorrectly attempted to establish a connection with us.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace peer context<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace peer context<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace peer verbose<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace peer verbose<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install verify packages command in IOS XR?
### Response:
The 'install verify packages' command is used to verify the consistency and integrity of the currently active software packages on the router. It checks for any missing or corrupted files.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-3-INT_PCI_CORE_OVRUN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: QFP-CPU Bridge detected a PCIe Core overrun error. This means that the QFP-CPU Bridge PCIe core could not accept Completion errors seen by the receive interface (CA and UR).), (Recommended Action: Save log file and report this error. If the issue persists, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-3-PROFILE_OP_SETUP_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The SLA Client Library failed to setup the operations configured to use the profile following the configuration of the profile. This indicates that there was insufficient memory for the setting up of operations and these operations will not start running until they are successfully set up.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. To resume normal operation, reconfigure the profile and the SLA Client Library will resync itself with the Profile Manager and setup the operations.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER_RSP4-3-HW_ERR_INTERRUPT
### Response:
(Severity: 3), (Category: DRIVER), (Description: This indicates that there is a HW error interrupt raised by IOFPGA), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-6-ERR_CHUNK_CREATE
### Response:
(Severity: 6), (Category: TOPOLOGY), (Description: System failed to create and initialize memory chunk. The most likely cause is a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Restart CM. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-GSM_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: When RDS library invoked GSP api group_send_memberset , it failed. The errno returned can help in understanding the problem. The transport GSP layer returned an failure to RDS.), (Recommended Action: This is a Debug message.No action required. If the problem persists,Contact Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-SIGEVENT_SEND_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-3-GET_IMG_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An image for an FPD could not be obatined so that it could be updated. The cause of the failure is indicated in the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_AGORA_ALM_TYPE_THREE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: AGORA type three alarm.), (Recommended Action: If the problem persists, call your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-6-BOOT_WITHOUT_FABRIC
### Response:
(Severity: 6), (Category: FABRIC), (Description: System is booting up without waiting for fabric to be up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-7-ERR_SYSDB_EDM_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: CCSQ Sysdb Register EDM error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SRVR_ENGINE-6-INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: SKS server general info message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-QAD_EGRESS_Q_LOOKUP_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: While transmitting a packet down to the fabric, couldn't find the egress queue), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-TUPLEVALUE
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to retrieve the given SysDB tuple for the given reason. This may or may not have a detrimental effect on the behavior of the SNMP agent (depends on which tuple it is).), (Recommended Action: Try to re-apply the config , if Still seen this message contact technical suppport representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-IO_PRIV_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to claim IO priviledges for the thread. IO Priviledges are required for accessing certian priviledged features of the processor.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-6-LOG_INFO
### Response:
(Severity: 6), (Category: INFRA), (Description: please see show kim log for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_NOT_READY
### Response:
(Severity: 3), (Category: OS), (Description: TCAM is not ready.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-UNSUPPORTED_SFP
### Response:
(Severity: 3), (Category: INFRA), (Description: The SFP inserted is not supported. The port will remain in link down state as long as this SFP is kept inserted. For proper use of the port, insert a SFP that is supported.), (Recommended Action: Remove the unsupported SFP and insert a SFP that is supported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-EVENT_BLOCK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath received an unexpected return code from the event library.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV4-3-CONV_ITEM_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred processing a BGP convergence item operation.), (Recommended Action: This indicates a problem with publishing BGP convergence via sysdb. If the errors are seen continuously and you see problems with BGP covergence, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is seen only once/twice while some sysdb processes crashed or were restarted, this might be related to that and could be considered transitory.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-REMOTE_MASTER_LEFT_LOOPBACK
### Response:
(Severity: 6), (Category: L2), (Description: While running the link in OAM Loopback mode, with the local peer as the Slave, the Master peer abruptly ended Loopback mode without first informing this peer to end it. This may indicate a problem with the remote peer.), (Recommended Action: No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOS_PORTR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_INTERNAL_CHECK_RC
### Response:
(Severity: 3), (Category: ROUTING), (Description: An inconsistency in internal state was detected.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-ERRORLIST
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUB_SIP_SHARED_DB-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: SUBSCRIBER), (Description: Print when Subscriber sip shared db or its clients fail to initialize necessary data structures and memories. The process cannot proceed without this module initialization.), (Recommended Action: The sysmgr will retry to start the process. If it cannot be restarted it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-4-WARNING_FIPS
### Response:
(Severity: 4), (Category: SECURITY), (Description: The sshd encountered a warning condition.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTH_SRV-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: Auth Service general warning message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
aaa_task-7-GENERIC_ERROR
### Response:
(Severity: 7), (Category: SECURITY), (Description: Internal debugging message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-IMDR_ABORT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CPUCTRL process aborted the IMDR upgrade process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-MAP_SERVER_SITE_EID_PREFIX_LIMIT
### Response:
(Severity: 4), (Category: IP), (Description: 'Map-server cannot create any more dynamic EID prefix ' 'entry result accept-more-specifics. Consequently, the ' 'map-register is not processed.'), (Recommended Action: 'Increase the map-server dynamic EID prefix entry limit.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-THREAD_CREATE_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver was unable to create a thread for the interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-ESMC_RECEIVE_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred when attempting to re-arm the ESMC SSM receive timer for the specified interface. Any SSMs received on the interface will continue to be handled, but any future peer timeouts (i.e. loss of SSMs) on the interface will go undetected.), (Recommended Action: Restarting fsyncmgr on the card on which this message was seen may fix the problem. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_MAX_DIRS
### Response:
(Severity: 3), (Category: MGBL), (Description: 'mirror encountered error, see message for more details'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-RDDR_FIFO1_PAR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: RxDDR 1875 to 200 FIFO 1 parity error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-TIMER_FAIL
### Response:
(Severity: 3), (Category: DIAG), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-4-DSCP_SET
### Response:
(Severity: 4), (Category: IP), (Description: An error occured while trying to set dscp value to socket. Telnet will start without spefified dscp value.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-CHKPT_TABLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while creating/accessing chkpt table. This will result in the PD code to exit.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CDR_DISPATCH_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric:CDR event message attach failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_SLAAC_RIB_ROUTE_ADD
### Response:
(Severity: 3), (Category: IP), (Description: Cannot add default route for auto configuration, there is some error between ND and RIB interaction.), (Recommended Action: auto configuration works only on management interfaces so restart IPv6 ND and RIB process on active RP should help.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen server failed to set an item in sysdb database. The item name is part of the error. This may result in failure to generate running config properly in show run command. Or an impact may be seen during the internal config backup.), (Recommended Action: Collect the show logging output, show nvgen trace output, show runnning output, show config history and show tech-support sysdb. Contact TAC representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-NEXTHOPS_TRAVERSE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unexpected error unregistering client next-hops. This may lead to a slow memory leak.), (Recommended Action: If RIB is leaking memory, try restarting it. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-3-SEEK_BCM_LOG_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Fseek failed for the provided offset for that bcm_log file. The error message indicates the failure reason. This is related to log file and it has no imapct on system functionality.), (Recommended Action: Please do bcm_process restart to recover from this. 'process restart bcm_process location < >' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-ERR_DEST_CONN
### Response:
(Severity: 4), (Category: FABRIC), (Description: This is to indicate that a node has lost connectivity to a plane. Most likely, back plane connectivity between the node and the fabric card has failed.), (Recommended Action: To fix the issue please reinsert the card and make sure it seats well. If that doesn't help than verify the integrity of mid-plane pins.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-3-GET_MY_NODEID_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DSC Media DLL failed to get the nodeid. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does priority inheritance solve the priority inversion problem with mutexes?
### Response:
Priority inversion occurs when a high priority thread is blocked waiting for a mutex held by a low priority thread. With priority inheritance, when a high priority thread blocks on a mutex, the thread holding the mutex temporarily inherits the higher priority. This allows it to complete its work and release the mutex more quickly, minimizing the delay to the high priority thread.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-REMOVE_ABORTED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package remove requested on this satellite has been aborted, as requested by the user. Run 'show nv satellite status' for more information about the current state of the satellite.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of a BGP route-map on IOS?
### Response:
A BGP route-map on IOS is used to filter and modify BGP path attributes for routes being sent to or received from a neighbor. It allows matching on prefix, AS path, community, etc. and setting attributes like MED, local preference, community, etc.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-ERR_CHKPT_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq Checkpoint Init error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-TEST
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the object does not exist or has the wrong type. Or because the verifier did not allow the change. The details are in the error string.), (Recommended Action: Check that the object to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-HW_ERROR
### Response:
(Severity: 2), (Category: L2), (Description: A problem is encountered at hardware layer for a given port. The traffic may start getting dropped after this error message.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-SETPRIO_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Attempt to change priority failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-PEX_INT_BIT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a pex switch error), (Recommended Action: Please try to correct problem by reloading board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-PWR_EXCEEDED_WARN
### Response:
(Severity: 3), (Category: PWR_MGMT), (Description: The chassis power usage has exceeded the configured warning threshold.), (Recommended Action: Ensure that adequate power is available for the chassis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT2_FIFO_OFLOW_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt2 fifo overflow on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-3-LIB_UNAVAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: Failed to dynamically load a dependent library. It is unavailable.), (Recommended Action: Install the package that has the library. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_12_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-4-LICENSE_GOING_TO_EXPIRE
### Response:
(Severity: 4), (Category: LICENSE), (Description: The term of the license is about to expire.), (Recommended Action: The customer should renew the expired licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp log neighbor changes' command in IOS XR BGP configuration?
### Response:
The 'bgp log neighbor changes' command is used to enable logging of BGP neighbor status changes. When enabled, BGP will generate a log message whenever a BGP peer enters or leaves the Established state. This is useful for monitoring the stability of BGP sessions and for troubleshooting connectivity issues.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SCP_READ_WRITE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error in SCP read/write.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT-0-GRP_ALM_EMERG
### Response:
(Severity: 0), (Category: SERVICES), (Description: The monitored flow has traffic issues as indicated by the react trigger. The problem is introduced either at some upstream router or even at the traffic source itself. Alternatively, a configuration mismatch between the traffic source and this router (for the flow data rates etc) can cause this error.), (Recommended Action: Check to see if traffic source is indeed sending traffic. Check that the traffic characteristics defined at the source match that on the monitoring router. Trace the traffic flow upstream to the source and verify flow-mon statistics at each applicable hop. Check for packet drops for the flow at intermediate hops - between source and the monitoring router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-FILE_TOO_SMALL
### Response:
(Severity: 7), (Category: OS), (Description: A file is found to be too small size than expected.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'preferred-path' command in MPLS TE configuration?
### Response:
The 'preferred-path' command is used to specify the preferred path for an MPLS TE tunnel. It allows the operator to influence the path selection for the tunnel by specifying a list of explicit hops or a dynamic path option based on TE attributes such as bandwidth, priority, and affinity. This command is useful for traffic engineering and for optimizing the network performance.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_RRW_UNLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to release rrw lock to the request record area in shared memory. This is a fatal error, the process will automatically restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
orrspf-4-LTRACE_INIT_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: The ORRSPF process failed to initialize ltrace correctly.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-1-ALL_FANTRAYS_REMOVED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Two possibilities to this message 1) An alarm has occured. Software has detected that all fan trays have been removed from the chassisbut, but gives user 45 seconds to insert another tray. If no action is taken within 45 seconds, the chassis will be shut down. 2) A previously occured alarm has been cleared. Software has detected that all fan trays were removed which would have shut down the system. But one fan tray was put back within 45 seconds, thus removing the need to shut down the system.), (Recommended Action: Two possibilities to this message. 1) An alarm has occured : Insert a fan tray within 45 seconds. 2) A previously occured alarm has been cleared : *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-BAD_OPEN
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Open of file failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is inserted properly and a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-7-BADRAWINIT
### Response:
(Severity: 7), (Category: MEDIA), (Description: Could not spawn a thread to handle nvram raw partition request), (Recommended Action: Restrat nvram server. If that too fails Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-3-LIB_INIT_FAIL
### Response:
(Severity: 3), (Category: INSTALL), (Description: 'Failed to initialize the library. The system may not ' 'function properly. '), (Recommended Action: 'Try restarting the 'instdir' process to recover. ' 'From exec mode - 'process restart instdir'' 'If the issue is still seen contact TAC.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_EVENT
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-3-ERR_INDEX
### Response:
(Severity: 3), (Category: IP), (Description: The VRRP process failed to obtain the snmp index for this interface. There may be a problem with the connection to certain IOSXR services.), (Recommended Action: Retry the configuration on this interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-READ_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens_read API to read, it returned failure. Underlying GSP/ENS might have some problem), (Recommended Action: This is a Debug message. No action required. If problem persists,contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_MASTER-2-MEM_ALLOC_FAILURE
### Response:
(Severity: 2), (Category: OS), (Description: RSI Master terminated due to lack of memory for a critical operation.), (Recommended Action: It is detected that the system is running under very low memory condition. Collect RSI traces and restart rsi_master process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_PARM_DRIVER_EXIT
### Response:
(Severity: 4), (Category: MEDIA), (Description: An invalid parameter value was passed to the media driver when it exits.), (Recommended Action: Report this message to TAC. Capture console log, 'show media' and 'show media trace' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-SATELLITE_SLA_PROGRAMMING_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered by the Satellite while attempting to program the MEP for the specified interface.), (Recommended Action: Try un-configuring the MEP and re-configuring it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-FAIL_SYSDB
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV-7-MSG_EVENT
### Response:
(Severity: 7), (Category: ROUTING), (Description: An error occurred in event manager or event connection operations. The text of the message displays the failed operation with error code.), (Recommended Action: Wait a few minutes and attempt the operation again. If the error persists, attempt to restart the failing process (LSPV_SERVER).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_9_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-6-PLANE_DEST_UNREACHABLE
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message gives additional information related to a plane in multicast-down state. It reports the number of operating fabric links from the plane to the destination. The threshold reported is the number of fabric links that are required for the destination to be considered reachable.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TABLE_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Unable to initialize table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_NETIO-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-6-CREATE_SHIM_ENTRY
### Response:
(Severity: 6), (Category: L2), (Description: Creating shim info entry for the given interface handle), (Recommended Action: *None*.Informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-1-HFR_FIB_OOR_LIMIT_EXCEEDED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: CEF on the node has detected that the number of routes has exceeded prescribed limits. Any further increase could cause CEF to block the routes from being programmed in hardware.), (Recommended Action: Take immediate action to delete routes from the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-CTX_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostics software detected an invalid or null pointer was passed to the named function. This is a serious error and could indicate memory coruption or a bug in the software. This is not a service impacting error.), (Recommended Action: Check the log ('show logging') to determine if there are any other related error messages. Also, please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area. Copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Also collect the information from 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OUNI-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal system error occured.), (Recommended Action: Please provide the show trace output, show run and show mpls optical output to the TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-7-RM_ATTACH
### Response:
(Severity: 7), (Category: OS), (Description: The syslog_dev process has failed to attach a Resource Manager to an Event Manager.), (Recommended Action: Collect the output of show tech-support, show processes , show memory, debug event-manager attach job <> and show watchdog memory-state from the location the error message comes from. If the error message doesn't persist, it can be ignored. If the error message persists,call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-PROXY_EVENT_CONN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_RX_DESKEW_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_RX_DESKEW_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-4-ACCT_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Failed to send an accounting record to RADIUS or TACACS+ server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-STBY_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize locald on standby node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_BDI_DEME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-6-ERRDIS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Front panel SFP port is UDLD Uni-Directional, check sfp/fiber for errors), (Recommended Action: 'Check if the media (fiber / sfp) has any errors')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMLOG-3-MALLOC
### Response:
(Severity: 3), (Category: OS), (Description: A call to malloc failed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-3-INT_SBE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: QFP-CPU Bridge detected a single-bit memory error (SBE).), (Recommended Action: Save log file and report this error. If the issue persists, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-PROCESS_PKG_DEF
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service package for the named virtual service has failed to be validated and the virtual service will not run.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-FA_BATCH_ERR
### Response:
(Severity: 4), (Category: SERVICES), (Description: One or more errors occurred in RSPP MA, the service diversion management agent, during the processing of a set of configuration detailing the failure policies to be applied in the event of service failure. The configured failure policies may now not be implemented on the node indicated. The error string will give more detail on the type of error that has occurred.), (Recommended Action: For non-resource errors, removing and adding back the configuration that prompted the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_A_DATABUS_STUCK_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI-A databus stuck on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_MESH_TUN_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the auto-mesh tunnel aborted since it would have exhausted the tunnel interface scale limit), (Recommended Action: Reduce configured/auto tunnels to below the system scale limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MCAST_EDM-7-GEN_FAILURE
### Response:
(Severity: 7), (Category: ROUTING), (Description: VIKING-MCAST library encountered error during setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-7-ERR_LWM_FAIL
### Response:
(Severity: 7), (Category: L2), (Description: An internal error was detected when trying to send a LWM message. There are several scenarios which can cause this error condition. Error message describes the exact cause.), (Recommended Action: No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_BIND_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering performance counter with stats infra failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-6-CONTROLLER_CREATE
### Response:
(Severity: 6), (Category: OS), (Description: Controller Creation Successfull.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP path MTU discovery in Cisco IOS XR?
### Response:
To configure RSVP path MTU discovery, use the 'rsvp mtu-discovery' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp mtu-discovery
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-SIGNAL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCAM_MGR_LIB-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error occurred in TCAM Manager which involves exiting the process. After the TCAM Manager process restarts, the error should have been cleared. *DDTS*), (Recommended Action: Collect the configuration, syslog and coredump file. Attach them to the ddts. After the process restarts automatically, the error should have been cleared and no user action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP local AS feature?
### Response:
The BGP local AS feature allows a router to appear to be a member of a second AS in addition to its real AS. This is useful in situations like AS migrations. The local AS is added to the AS path of inbound updates and removed from outbound updates. It is configured with the neighbor local-as command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you verify that the IOS XR software installation was successful?
### Response:
After the TURBOBOOT process completes and IOS XR starts up, you can use these CLI commands to verify the installation\n- `show install active summary`: Shows the active software packages\n- `show install committed summary`: Shows the committed software packages\n- `show version`: Displays the IOS XR version and other system information\n- `show inventory`: Lists the hardware components and their status\n- `show platform`: Displays information about cards and modules in the system\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-POWER_DOMAIN_2_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: Failure in power domain 2 indicates that the ASICs running on that power domain will not be operations. ASICs on this power domain are usually related to data path features, so although the boards CPU is running (from power domain 1). The card will not function correctly, the SysAdmin VM might continue to function to allow collection of debug info.), (Recommended Action: This is an indication of HW failure and will require RMA of the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-ERR_ASIC_DROP
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq received a packet with SOP/EOP/MAC error It is primarily caused by either software or mac issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-PTP_VC
### Response:
(Severity: 3), (Category: L2), (Description: Point-to-point (PTP) subinterfaces only allow one PVC and an attempt to create a second PVC is being rejected), (Recommended Action: Remove the old PVC before creating the replacement, or use a multipoint subinterface instead)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-7-IPACCESSPTHREAD
### Response:
(Severity: 7), (Category: ACL), (Description: The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Possible causes of failure are the mutex is corrupted, has not been initialised or is being accessed recursively (this is not allwowed). Because the mutex could not be used the process may restart to recover from the failure.), (Recommended Action: Please get the information specified under the component required_info and call your Cisco technical support representative and provide the representative with the gathered information with this error message text. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLDR-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XRv sysldr error message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL_GRE_EA-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the platform specific code software to indicate anomolies while initializing GRE Feature. This error is most likely caused by a temporary situation within the feature code. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-ARG_MISMATCH
### Response:
(Severity: 7), (Category: ROUTING), (Description: The user is trying to do an operation in which the number of arguments entered does not match the number of argument expected.), (Recommended Action: Correct the number of parameters that are passed in. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-LINUX_LOOPBACK_ADDRESS_REMOVED
### Response:
(Severity: 3), (Category: INFRA), (Description: XLNCd is responsible for keeping the networking stacks for IOS XR and Linux synchronized. Certain IOS XR interfaces only have L3 reachability, provided by having their IP addresses added to the Linux loopback device in the network namespace corresponding to the IOS XR VRF the address is configured in. This message indicates that a XLNCd believes an address that it has added to a Linux loopback device has been removed unexpectedly. The removal could have been triggered by user action, or a Linux script or process.), (Recommended Action: If the address was removed intentionally because no Linux applications require L3 reachability for that address then no action is required. If the removal was unexpected then the immediate problem can be addressed by re-adding the address to the Linux loopback device. IPv4 addresses can be added using <CLI> run ip netns exec <netns-name> ip addr add <ip> dev lo </CLI> IPv6 addresses can be added using <CLI> run ip netns exec <netns-name> ip -6 addr add <ip> dev lo </CLI> To avoid the problem recurring, the trigger for the removal should be investigated by consulting available Linux logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify the status of an MPLS L2VPN xconnect?
### Response:
To verify the status of an MPLS L2VPN xconnect, use the 'show l2vpn xconnect' command. show l2vpn xconnect
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-2-ERR_EES_INIT
### Response:
(Severity: 2), (Category: FABRIC), (Description: Rack num could not be determined because platform_get_my_nodeid failed.), (Recommended Action: Whenever this happens, fgid_server will dump a core file. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_IMC_CAPS_DATAPATH_CONTROL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-6-BADSFP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: nV Edge Control ports needs Cisco supported SFPs.), (Recommended Action: 'Plug in a Cisco supported 1Gig SFP')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-ADD_SYMLINKS_FILE
### Response:
(Severity: 3), (Category: OS), (Description: A error occured while processing a QSM configuration file. This could be due to a problem with the installed media or file system damage. QSM will continue startup-up, but some system functionality may be impared.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDP-3-INIT_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An software error occurred while starting up of UDP process. If this occurred during process startup, then the process may be restarted.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SAM_CFG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SAM command operation error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-BUS_ADRERR
### Response:
(Severity: 4), (Category: OS), (Description: The CPU is instructed by software to read or write a specific physical memory address that is non-existent), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_rio_netio-3-CAPS_CONTROL_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: The service ingress diversion NetIO DLL capsulation function failed. Service ingress diversion in NetIO for the specified interface will not function properly.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-STACK_SIZE_INVALID
### Response:
(Severity: 3), (Category: OS), (Description: Stack size of target process is invalid. If the stack size is zero then the core dump will not have stack related information of the target process.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSCMIB-7-INVALID_ARG
### Response:
(Severity: 7), (Category: SNMP), (Description: The MIB has reached an unexpected state, and will not be able to service the current request.), (Recommended Action: If the message recurs continuously, please restart the process emitting these messages. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-COMPARE_CLIENT
### Response:
(Severity: 3), (Category: OS), (Description: Comparison of the client failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-2-CAUSE_HBLOSS
### Response:
(Severity: 2), (Category: PLATFORM), (Description: User ran a heartbeat test utility to create heartbeat loss.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-LOCKING
### Response:
(Severity: 7), (Category: LIBRARY), (Description: The replicator library has either failed to aquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_INVALID_DROP
### Response:
(Severity: 5), (Category: OS), (Description: An SR policy has entered/exited from invalidation drop state), (Recommended Action: Verify path validation and constraints.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-INTERNAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An internal operation failed despite multiple retries. This could be due to an external service being unavailable.), (Recommended Action: This error message indicates an internal operation has failed and the retries have been unsuccessful. More information as to which operation has failed is available in trace.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-MBI_CONFIG_INCORRECTLY_CHANGED
### Response:
(Severity: 7), (Category: INSTALL), (Description: Configuration definitions have changed for an MBI file and this has only done by changing the MBI config namespace file, not by moving the MBI config namespace file out of the MBI as is required by the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-POWER_ZONE_DOWN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This indicates that the given power-zone has gone down, and therefore the related nodes are being brought down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-ERR_INVALID_POLICER_RATE_BURST
### Response:
(Severity: 4), (Category: OS), (Description: Policer burst is set to more than Policer Rate.), (Recommended Action: No action is needed. Incorrect burst value is auto corrected to the policer rate.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LNS_EA-4-ERR_INIT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: A failure occured during the initialization of the process. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-AREALOST
### Response:
(Severity: 4), (Category: ROUTING), (Description: Too many IS-IS areas--cannot route to area AREA-ADDRESS. This system has exceeded the limit of three learned area addresses. The largest address AREA-ADDRESS has been dropped from the list of active areas.), (Recommended Action: Reduce the number of area addresses in the routing area.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_PKDREAD
### Response:
(Severity: 5), (Category: SYSDB), (Description: An error occurred while preparing to read instructions from the command line.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AVSM_APIV-3-REGISTRATION_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The registration of APIV modules has not completed. The specified timeout period has reached and is this event will be considered as a failure that will trigger a reload of the affected card.), (Recommended Action: Contact Cisco TAC to diagnose the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CHKPT_ALLOC_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checkpointing is a mechanism to update the redundant RSP with the current configuration and status of the system to help takeover in case of a failover. The checkpoint mechanism needs to be initialized for Sync-controller to update the standby RSP with current frequency syncronization status. This failure could be because of memory allocation failure.), (Recommended Action: * REDUCE *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSI_NETIO-5-INCORRECT_SAVE_DATA_LEN
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: CSI DLL saves data across DLL upgrades. It expects the length of saved data to be same before and after upgrade, else it would cause netio to take default action (to restart) for upgrade to take effect.), (Recommended Action: This message indicates that netio will take default action to restart as 'csi netio' dll does not support dll upgrade with different saved data length. No further action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-4-SYSMGR_GET_NODE_STATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error occurred while trying to get the system [active/standby] state. A state of REDUNDANCY_UNKNOWN will be assumed. This process also registers for notification of changes to the [active/standby] state. Thus, the state can be determined by this means as well. Failure to receive notification for either one of these means could result in this process not functioning properly. Note At least one of the processes in an active/standby pair must be active in order to assure proper functioning.), (Recommended Action: Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_INT_PWR_SUPPLY_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-1-PARITY_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a Parity error.), (Recommended Action: Reboot the card. If the problem persists, report the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FRMIB-3-SYSDB
### Response:
(Severity: 3), (Category: L2), (Description: This message indicates the FR MIB library fails to perform a SYSDB operation. Trap initialization will be affected. The error could be related to the following: - failed event attach - timer tree initialization failure - Trap handler registration failure - EDM handler registration failure - IPC issues - Trap OID conversion problem), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-READ_POWER_SHELF_TYPE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: We are unable to read the power shelf backplane EEPROM for some reason. Need to check the programming of the backplane.), (Recommended Action: Check that the power-shelf is seated correctly, and that the backplane EEPROM is programmed correctly. In the admin mode, use 'show diag power-supply eeprom-info' to check the contents of the EEPROM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_STARTBULK
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_SPECIAL_HANDLE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: An ASIC error that need special handling has occured and been handled.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_UCORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory uncorrectable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE2_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE2_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-3-UNKNOWN_IDBTYPE
### Response:
(Severity: 3), (Category: L2), (Description: Information about InARP interfaces has become corrupted.), (Recommended Action: Restart the main processes (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VLANIFMIB-4-BAG
### Response:
(Severity: 4), (Category: SNMP), (Description: The VLAN Interface table relationship MIB encountered an error while encoding / decoding some data. It is likely that an SNMP query that was in progress will not have been completed.), (Recommended Action: Retry the operation that caused the message to be displayed. It may help to restart the SNMP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-SYSTEM_STATE_UNSTABLE
### Response:
(Severity: 2), (Category: INFRA), (Description: An operation to reload the system to apply the latest software has failed. This has left the system in an unstable state that requires user interaction. The user needs to reload the system. This will cause the system to return to the fallback software.), (Recommended Action: For the reload error: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Once the required info has been collected, then reload the system and re-try the install operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-LOW_3_3VCC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low in 3.3Vcc voltage. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSDB_BIND_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper keeps various config related data in sysdb. Here dumper could not connect to sysdb), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-BLOBBIFIER_ERROR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter may have been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-LSDB_ERROR
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPFv3 detected an error with its link state database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_RRW_LOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to aquire rrw lock to the request record area in shared memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-NO_TOD_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No TOD messages are being detected on the GPS port UART receiver.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_4P_OC192-3-DRV_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: PLIM driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (plim_4P_oc192) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: Otn-framer driver failed to create an event manager during the driver initialization. The driver will be non-operational due to this error.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE interarea tunnels feature?
### Response:
The MPLS TE interarea tunnels feature allows MPLS TE tunnels to be established across IGP area boundaries. This enables TE to operate in multi-area environments. Interarea TE tunnels comprise hops in different IGP areas and are signaled as a contiguous end-to-end LSP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-INIT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-MAIN_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during main thread initialization, causing the process to terminate. Check the details of the error message for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-WD_METRIC_NOT_CONF
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified interface and topology has been configured with a metric value that requires metric-style wide to be configured for the relevant level.), (Recommended Action: Configure metric-style wide for the topology and area.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
c2c_aif-3-ERR_SW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The C2C AIF library encountered an error which it cannot resolve.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_LIB-3-FAILURE_TO_RETRIEVE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The platform library service call to find the config tuple for svd platform enable has failed. The calling application handles it appropriately.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-BAD_CHAIN
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An invalid chain type was received by the chain builder. This is an internal error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-5-TABLEERR
### Response:
(Severity: 5), (Category: MGBL), (Description: An internal table entry became corrupted.), (Recommended Action: Copy the message exactly as it appears, and report it your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-REMAP_ERR
### Response:
(Severity: 3), (Category: OS), (Description: An error has occurred when shmwin was trying to remap the memory. Shmwin server needs the memory to operate. Process will exit when it has encountered the error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture process core of shmwin_svr)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-RELAY_CLEANUP_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr has errored or failed while attempting to cleanup a relay running on the previous active RP prior to switchover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_PEER_RSP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-3-L2VPN_DISCONNECT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: When the VLAN MA notices that it has lost its connection to the L2PVN Manager process, it needs to update its database to reflect this. This error message indicates that this the update failed. The only expected scenario that could cause the error is a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFC_WATCHDOG-5-PKT_DROP
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Priority Flow Control (PFC) enabled queues(lossless) are experiencing drops.), (Recommended Action: Check if drops are due to headroom exceed or due to queue shutdown by PFC WD expiry. Headroom exceed drops can be seen as Rx Drop Data Frames in show controllers <intf> priority-flow-control statistics. Queue shutdown drops due to watchdog expiry can be seen as Dropped Packets in show controllers <intf> priority-flow-control watchdog-stats. Investigate why there is a congestion experienced on the lossless queue that is leading to drops.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-WARN_MEM_ALLOC
### Response:
(Severity: 4), (Category: SNMP), (Description: Due to a low memory condition we could not enable (or disable) the specified traps or we could not register to receive the specified MIB notifications. Until available memory is increased and the SNMP process is restarted, these notifications will not be generated by the agent.), (Recommended Action: check the state of prcess from below CLI's 1)'shmw snmpd process' 2)'show process block | i snmpd' Please restart snmpd process if still showing the error conatact technical support representative with required info. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Interrupt controller LWM reply error), (Recommended Action: Please attempt to correct the error by restarting the process. Issue the command in exec mode -process restart longbeach If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_FSDB_FADB_LTRACE-3-EVENT_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FSDB FADB ltrace lib failed to initialize the events ltrace), (Recommended Action: Search the event logs for events/errors related to the failure reason. Ltrace usage is common to overall system. If there are failures here then other processes may also exhibit similar problems. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-ERR_DSC_NODEID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Got invalid DSC node while searching to run the DRP pairing process on DSC node. Software will automatically do recovery by restarting the drp_pairing process.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KEYCHAIN-6-KC_TYPE6_MK_UPDATE_START
### Response:
(Severity: 6), (Category: SECURITY), (Description: kc_srvr has received a masterkey update event. All the existing type6 passwords will be re-encrypted using the new key.), (Recommended Action: This is just an information. Note if the migration is successfully completed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-FPGA_SIPPI_LOS
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a timeout on some bus), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VEEA-4-BCMDPA_L1_PFC_UNSUPPORTED_HW_PROFILE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: BCMDPA L1 port PFC config failure.), (Recommended Action: Unsupported config, fix config.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-3-MULTIPLE_STUCK_BITS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Multiple stuck bit is detected in DRAM.), (Recommended Action: In-field hardware repair. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC_RSRCMON-6-INFO
### Response:
(Severity: 6), (Category: SERVICES), (Description: The system is in normal state. Alarms have been cleared.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFC_WATCHDOG-5-MAX_SHUTDOWN_MULT_EXCEED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Due to hardware limitation, a queue should not be completely stuck for more than 6-7s. Hence, PFC WD triggered shutdown action is auto adjusted to be enforced within that interval and the user is warned of the adjustment.), (Recommended Action: This is just a warning msg, the shutdown multiplier is auto-adjusted to supported max. But it is advised to configure PFC WD config such that interval + (shut-mult *interval) <= 6secs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-MULTIPLE_IPV4_HOME_ADDRESS_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: IP), (Description: The PBU received has multiple HoA Request options. This is invalid as the PBU can contain only a single HoA request option.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-TSP_A_PWM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSP decoder A PWM error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-6-IPARMS_UPDATE_ERR
### Response:
(Severity: 6), (Category: ROUTING), (Description: Internal error), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-7-NO_MEM
### Response:
(Severity: 7), (Category: INSTALL), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-FALAFEL_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The driver failed to initialize falafel with the above reason.), (Recommended Action: The asic will restart and try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-6-ADMN_STATE_INFO
### Response:
(Severity: 6), (Category: L2), (Description: Informs about the admin state change. first %s --> The method name next %s --> TRUE/FALSE %x --> interface handle.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to monitor RSVP TE tunnels in Cisco IOS XR?
### Response:
To monitor RSVP TE tunnels, use the 'show mpls traffic-eng tunnels' command in EXEC mode. RP/0/RSP0/CPU0:router#show mpls traffic-eng tunnels
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-ETHSERVER_DOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The card could not send a heartbeat reply to the RSP because the ethernet server connection is down. The card will continue to attempt to respond to the heartbeat requests from the RSP. If the RSP continues to not receive these messages due to this particular or any other failure, it will issue a command to reset this card.), (Recommended Action: Please collect the following information and contact your Cisco technical support representative. 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-CAP_4BYTEAS
### Response:
(Severity: 4), (Category: ROUTING), (Description: Possible misconfiguration with 'capability 4-byte-as suppress'. This configuration can be inherited from either a neighbor-group or a session-group by a neighbor whose remote-as is a 4-byte as number. Suppress should be off for such neighbor.), (Recommended Action: Check the bgp configuration. Remove the 'capability 4-byte-as suppress' configuration or disable it to prevent getting inherited from the neighbor-group or a session-group)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_THREAD_INIT
### Response:
(Severity: 3), (Category: HA), (Description: An error occured when attempting to initialize the event manager thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-PLIM_DCEN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PLIM DCEN jumper installed. PLIM will power up, but will not be fully operational.), (Recommended Action: Please collect required_info and remove the jumper. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_IF
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error encountered in RIP interface module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ether_spa_dwdm-3-PLL_NOT_LOCKED
### Response:
(Severity: 3), (Category: L2), (Description: The SPA driver failed to initialize the PLL.), (Recommended Action: Try Reseating the SPA if the problem persists even after reseating collect the output of CLIs and contact TAC. 1. 'show interfaces TenGigE <>/<>/<>/<>' 2. 'show controller TenGigE <>/<>/<>/<>' 3. 'show logging')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-EVENT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message which indicates the blocking of an event.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_MEM_ALLOC
### Response:
(Severity: 7), (Category: OS), (Description: Memory running low), (Recommended Action: Information only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-6-SET_CAUSE_FAIL
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-ERR_PRM_STATS_ALLOC
### Response:
(Severity: 5), (Category: OS), (Description: It failed to allocate HW counters. It may be because of running out of HW counters or encountering internal error.), (Recommended Action: Disable the numbers of non crucial services which use HW counters.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_AGENT-3-EVM_EVENT_BLOCK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in the event loop. It may be possible to rectify it by restarting the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-4-DIA_PEER_UNRESPONSIVE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Pending messages for diameter peer. Check 'show tcp brief' for diameter for peer connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-MAC_1_TX_FIFO_OFLOW_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: MAC on NPU-1 had transmit fifo overflow on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-ERR_EMPTY_SESSION
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error, Session node does not include any ipsec and ike SAs, This indicates an internal data structure inconsistency.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-WARNING_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace all loc <slot number>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How is an IOS XR release version identified in the image or PIE filenames?
### Response:
An IOS XR release version is identified by a numerical suffix value added to the image or PIE filenames. For example, a 3.6.0 suffix identifies an IOS XR mainline release 3.6.0.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_INFRA-3-register_failed
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to register with sysdb), (Recommended Action: Please contact tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV-7-MSG_GENERAL
### Response:
(Severity: 7), (Category: ROUTING), (Description: System failed during an API call to database or event manager in the initialization phase of LSPV_SERVER process or its debugging subsystem. The text of the message displays the failed operation with error code.), (Recommended Action: The database or event manager may be experiencing higher than expected load. Attempt to re-start the LSPV_SERVER process after a few minutes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB-4-SHM_MMAP_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to map the FADB shared memory), (Recommended Action: Search the event logs for events/errors related to the failure reason. Shared Memory Management is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) and the output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSCMIB-3-CSC_BAG
### Response:
(Severity: 3), (Category: SNMP), (Description: This may be due to invalid data being sent by the agent or request, or due to an error in the data-marshalling infrastructure. The current request cannot be completed. Check the request and try again.), (Recommended Action: Check the request and retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-HW_DETECTED_ERROR_PCI_SN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver HW error interrupt handler was invoked and found valid PCI SN error registers.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_INFO_HEX
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code (in hex). Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-FAILED_TO_COMPARE_MD5
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Finding out if the local MBI in dSC and the boot requestMBI MD5 values matches or not got failed. Either the MD5 values are invalid, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out. %s - indicates the node on which the error occurred. %s - gives the MBI path we're comparing. %s - gives the MBI path we're comparing against. %s - gives the error message. %s - gives the MBI path we're comparing.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-EVH_INIT_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process is failing to create an event manager. See error for reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-6-OVS_INFO
### Response:
(Severity: 6), (Category: L2), (Description: OVS info message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-6-NOT_SUPPORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Because CRS-DRP is not supported in CRS Series 4 Slots Line Card system, therefore, drp pairing configuration will be disabled also.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-4-READ_FAIL_RECOVERY
### Response:
(Severity: 4), (Category: FABRIC), (Description: If the confd read fails this reovery is triggered. Router is not reloaded, there will not be any effect.), (Recommended Action: In order to recover the setup from hw profile config mismatch, SDR reload is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CISCOSYSTEMMIB-7-CREATE_EVM
### Response:
(Severity: 7), (Category: SNMP), (Description: Attempt to create an event manager fails for some reason.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-RSI_C_REGISTRATION_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register for notification of changes to a VRF.), (Recommended Action: This failure may be due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_MA-3-PREPAID_REQUEST
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: There is an internal failure when starting a new prepaid session or requesting a new quota. This can be seen when acct_ma sends a request to subscriber manager (iedged) process to initiate a prepaid event to AAA.), (Recommended Action: Check all applicable configurations on the router. Check if prepaid server is reachable and have correct configurations. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-6-NODAL_SERVICE_STATE_CHANGE
### Response:
(Severity: 6), (Category: OS), (Description: Service state changed to available/unavailable.), (Recommended Action: Collect system logs and show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_KDUMP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node's kernel is dumped to local harddisk or RP's harddisk.), (Recommended Action: Collect the crashinfo, core and pcds files created on harddisk before contacting Cisco for technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-MGMT_STATE
### Response:
(Severity: 7), (Category: MGBL), (Description: The TTY server tried to update the TTY's state in SysDB and failed to do so.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the lsp-password command in IS-IS?
### Response:
The lsp-password command is used to configure a password for IS-IS LSP packets. When configured, IS-IS will insert the password into the LSP packets it generates, and will check the password in received LSP packets. This provides a form of authentication to prevent unauthorized routers from injecting false routing information into the network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-4-RESOURCE_LEAK
### Response:
(Severity: 4), (Category: L2), (Description: BFD was not able to free certain resources, such as allocated memory, discriminator or checkpoint object, due to infrastructure API returning error from free/deletion operation(s). BFD should be able to continue processing by allocating new resources. However, support personel should be contacted to investigate the cause of resource leak.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_REPLICATE
### Response:
(Severity: 4), (Category: L2), (Description: When attempting to replicate the bundle to one or more new interface locations, the replication operation failed. This probably happened because some hardware resource on the specified LC(s) was exhausted. The record of the new member(s) which triggered this replication will be removed from the bundle process on the RP but will still be referenced by the bundle process on the LC.), (Recommended Action: Determine whether the hardware resources for the LC(s) have been oversubscribed, e.g. more VLANs on the LC(s) and on the bundle that the LC(s) can support. If this is the case, reduce the number of allocated VLANs. Then remove the member configuration and reapply.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-THREAD_POOL_START
### Response:
(Severity: 3), (Category: OS), (Description: An error occured whilst PlaceD was starting a threadpool.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-RIGHTARG
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The test token has invalid right argument'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-frag_flags_not_supported
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This message will typically occur when an ACE is specified with a fragment-flag of an attached ACL on egress direction or ACL is not in compressed mode.), (Recommended Action: Make sure that the ACL is attached with compression level 3.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-EVM_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: QNET process tried to create a thread for handling events but encountered error. The process will exit and retry again), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-6-NODE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Useful general info logged by the Platform Fault Manager that can used to establish a sequence of events that occurred in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-UNKNOWN_ACL
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP received an unknown action (permit/deny/etc) from the ACL library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5345_ACCESS_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5345 read/write access failure/success), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_ASIC_SYSLOG
### Response:
(Severity: 3), (Category: FABRIC), (Description: This message is logged whenever an ASIC detects an error. This message includes:\ ASIC identifier, interrupt name & its ID, \ Interrupt type, effect of the error on the system & the software action taken.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVC_GET_FD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA failed to retrieve the file descriptor associated with the specified service. This is an internal error.), (Recommended Action: Consider restarting the PPPoE MA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-3-NCS1K_PROV_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Provisioning of specified slice has failed), (Recommended Action: The casue for the provisioning failure has to be analyzed. Collect the show tech logs by running 'show tech-support ncs1k detail' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-1-ERR_HW_RESET_PLL_THRESHOLD
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error is detected on the PLIM. Software will take action as described in the error message, if not none, to try to recover from the error. The hardware error and the software recovery action will not impact traffic. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error. Recommended user action: %s - recommended action to the user. Possible values: 'none' 'replace XFP' 'PLEASE MANUAULLY RELOAD THE LC AT NEXT MAINTENANCE WINDOW'), (Recommended Action: Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_OOR-4-MGID_COUNT_OOR_GREEN
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-CLKCTRL_TX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller FPGA reported that data it received from Timing and CPI controller FPGA had parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-CS_REL_MISMATCH
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Release mismatch), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-6-LOCAL_EXEC_ACCT
### Response:
(Severity: 6), (Category: SECURITY), (Description: MGBL session login logout syslogs when local cmd acct and exec acct is enabled), (Recommended Action: Added as part of new feature to account MGBL sessions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to monitor RSVP TE tunnels?
### Response:
To monitor RSVP TE tunnels, use the 'show mpls traffic-eng tunnels' command in EXEC mode. RP/0/RSP0/CPU0:router#show mpls traffic-eng tunnels
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH_CLIENT-3-GEN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with EPM SWITCH server process. It may be caused due to invalid api arguments by client processi, or a transient condition while the server process is respawning from crash, or the EP SWITCH hardware does not respond to inquery.), (Recommended Action: This message may indicate a transient condition while the EPM SWITCH process is booting up. Please check if the error message is seen continuously even after the EPM SWITCH process reached Run state. please contact tech-support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB encountered an error while attempting to create an event manager. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-SCHED_GET_PRIORITY_MAX
### Response:
(Severity: 7), (Category: HA), (Description: The sched_get_priority_max() function returned an error which is indicated in the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAL_IPHC-2-EA_INIT_FAILURE
### Response:
(Severity: 2), (Category: L2), (Description: IPHC pal ea critical error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-NO_INTERFACE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A request to delete a non-existent interface has been received. This is relatively a harmless error, unless it is too frequent, in which case the reason for the error must be investigated, starting with the name of the interface printed in the error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CALVADOS_DUMPER-6-TH_CREATE_FAIL
### Response:
(Severity: 6), (Category: INFRA), (Description: Could not create thread to start copy of file), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Collect this error message, along with the output of 'show tech-support ctrace'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_RC_HEX
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, hex_code of rc.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-EVENT
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error (other than EINTR) occured in the event loop. The process must exit.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_SDFEC_OOF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_NB_SERDES_1_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data north bound serdes link 1 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROLLER_ODU-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred initializing a necessary module of the ODU Contoller. The process is unable to run. Restarting the process by retrying the operation may clear the issue or indicate that the system is in a unstable state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_REDIST
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error encountered during redistribution of other protocols into RIP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the zoning feature in Cisco IOS XR and how is it configured?
### Response:
The zoning feature allows grouping physical interfaces into security zones and defining security policies for traffic moving between zones. Interfaces in the same zone can communicate freely, while traffic between zones is subjected to policy restrictions. Zones are configured using the 'zone security' command and policies are defined using the 'zone-pair security' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_MEMMON-1-MEM_ALERT
### Response:
(Severity: 1), (Category: INFRA), (Description: Memory usage is above critical threshold, state is CRITICAL.), (Recommended Action: Please check top five memory consumers and kill some of the memory consumers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-FAIL_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The DRP redundancy driver process exited for the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered inorder to recover. Execute 'show process reddrv location <>' to verify that the process is up and running after the restart. If it is still non-operational, try doing from the admin mode 'process restart reddrv location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-EVM_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The Verification Daemon failed to destroy its event manager. The process is exiting anyway which should clear the condition.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAMSG-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: SPA related error msg comes when there is some problem with the initializing the debug event type structure), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_MQ_SEQ_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 0 MQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC-3-ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: IPSec Base component Fatal Error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-MIB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the BGP MIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_DATABIT_STUCK_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory databit stuck on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_APS-6-ADDR_THRESHOLD_XCED
### Response:
(Severity: 6), (Category: IP), (Description: The Address configured are too many. The message is to confirm if this is intentional.), (Recommended Action: Check the configuration to confirm the configuration is intentional. Remove any misconfiguration. If that does not work contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMA-3-LINK_GROUP_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: The link addition/removal from a IMA Group has failed due to a software error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-6-OPTICS_REMOVAL
### Response:
(Severity: 6), (Category: L2), (Description: Optics module has removed %d - bay number %d - port number), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-RETRYDB_NONEMPTY
### Response:
(Severity: 4), (Category: ROUTING), (Description: FIB has detected that some objects are in the unresolved state. As a result, traffic may end up being dropped for an extended period of time.), (Recommended Action: Take a look at 'show cef <protocol> retry-db location <node>' and 'show cef <protocol> unresolved location <node>' for the node and protocol for which the syslog is being shown. If there is nothing in the databases, please ignore the error message. Check that traffic being forwarded via the next hop shown in the output of 'show cef <protocol> unresolved location <node>' is being forwarded correctly. If it is, then no further action is necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-QSM_ADD_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_primary_server process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show cctl_primary_server location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-PARTNER_CHURN
### Response:
(Severity: 5), (Category: L2), (Description: Partner churn has either been detected (due to the failure of the partner to be marked as synchronized on this link soon enough) or has now cleared. If the link is in Standby state on the peer router, then partner churn will be detected after the churn timeout; this is expected behavior. Otherwise, this indicates a possible misconfiguration.), (Recommended Action: If partner churn has been declared and the link is not marked as Standby on the peer router, check that the configuration for the link allows it to aggregate, and fix as appropriate. Check for misconfigurations between the two ends of the link which is reporting churn. The output of the <CmdBold>show bundle<noCmdBold> command may help identify the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens when you insert or remove a node in IOS XR?
### Response:
When you insert a new node in IOS XR, the system automatically applies the current running configuration to the new node. When you remove a node, the configuration specific to that node is automatically removed from the running configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR_ERR-3-ERR_CARDTYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Crossbar driver encountered an Error. The cardtype of the nodeid is not correct .), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-MSGERROR_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Could not reply to client. This will impact behavior of dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFO_EA-6-PD_ERROR_UL_INTF_REMOVAL
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: During the handling of a bundle member update notification, the platform returned an error which cannot be handled. The interface may continue trying to send traffic over an interface which it should no longer be using, resulting in traffic drops.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_7_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the package manager process in IOS XR installation?
### Response:
The package manager process is responsible for managing the installation and removal of software packages on the router. It works closely with the instdir process during installation operations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP local preference attribute?
### Response:
The local preference attribute is used to prefer certain paths external to an AS. A path with a higher local preference is preferred. It is the second criteria in the BGP best path selection after weight.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_QUERY_ORA-3-INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal software error in the routing policy library and as a result routing policy may not be applied correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-AUTO_ABORT_TIMER_RUNNING_WARN
### Response:
(Severity: 4), (Category: INSTALL), (Description: The auto-abort timer is running and soon to expire.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISKUTIL-4-INIT_WARNING
### Response:
(Severity: 4), (Category: MEDIA), (Description: An unexpected initialization problem condition encountered. It will not affect system backup but may lose some debug information.), (Recommended Action: Collect system log information. Let router continue to run if only this warning shows up No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-4-PARAMETER_NULL
### Response:
(Severity: 4), (Category: INSTALL), (Description: An NULL parameter has been unexpectedly passed to the Install infrastructure.), (Recommended Action: This is an internal software error and will be recovered automatically. Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-CARD_PWR_OPER_FAILED
### Response:
(Severity: 4), (Category: DRIVER), (Description: Card manager has failed to process power-on request from shelf_mgr as the previous request is in progress. Once the previous request is done it will take the new request), (Recommended Action: Run 'hw-module location <loc> reload' command to power-on the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-4-REBOOT_INFO
### Response:
(Severity: 4), (Category: MEDIA), (Description: printing the reboot reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_ALARM-2-DEVICE_HALT
### Response:
(Severity: 2), (Category: FABRIC), (Description: INGRESSQ, ASIC got halted. The halted block and its parent block are provided), (Recommended Action: Open a case with TAC Support along with this required information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-NONEXISTENT_INTF
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The Linux interface specified in XR_INTERFACES does not exist.), (Recommended Action: Check the Linux interface names in the XR_INTERFACES environment variable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-IPMC_FEC_EXISTS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IPMC fec exists), (Recommended Action: Please collect below CLI outputs, (show logging), (show dpa trace loc <>), (show dpa objects all location ?), (show mfib hardware trace all location ?), (show dpa objects ipmcroute location ?), (show controller fia trace all reverse location ?), (show controllers fia trace brcm-error reverse location ?), (show controller fia trace brcm-sdk reverse location ?) Report to your technical support representative for further details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-LWM_API_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Failure in LWM client API.), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) Console messages b) show tech-support parser)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-CPU_PRT_A_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver detected an address parity error from the cpu), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to register for verification of changes to its configuration data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-7-SYSMGR_REGISTER
### Response:
(Severity: 7), (Category: IP), (Description: Registering with sysmgr failed while getting tty details. Internal error.), (Recommended Action: Internal error. Process will retry the operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-MBIST_TIMER_EXPIRED
### Response:
(Severity: 3), (Category: FABRIC), (Description: MBIST timer expired. Board will reload to resume normal operations.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: L2), (Description: BFD Agent failed to open a connection to the SysDB Server process for one of the paths. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective MSC reboot.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-ANR_SIGN_VERIFY_FAIL
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'The new device joining the network verified the ' 'signature of autonomic registrar as a part of mutual authentication ' 'and the verification failed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPT_SUB-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an infomative message in DPT), (Recommended Action: Please collect the console log, DPT traces (show dpt trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-ERR_INFO_NOT_SUP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error in PLATFORM FIB HAL indicate that the logged feature not supported), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show logging, show version, show platform, show install active, show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-PCL_XCELL_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Sponge encountered a PCL extra cell error, and received more cells for a packet than were expected.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-LTRACE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTH_SRV-3-ERR_2_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: auth srv exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDS_LIB-4-INIT
### Response:
(Severity: 4), (Category: INSTALL), (Description: An error occurred during initialization of the library.), (Recommended Action: Sysmgr will automatically re-attempt initialization of SDS. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_OPTICS_PORT_UNSUP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An optics Module not supported for the port error was detected during module initialization. A optics module not supported for the port error is reported when Optics is not supported on the port. The optics is the pluggable optics on the line cards. Optics initialization may happen when linecard boots up, optics OIR and line card process restart.), (Recommended Action: Verify that the optics Module is supported for the port. Replace the optics with a working one (if any) to isolate bad optics. Check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the command 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_NPMB-3-BAD_LISTENER_TAG
### Response:
(Severity: 3), (Category: OS), (Description: Unknown lpts packet type; or LPTS packet with bad listener tag.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_NOTIF_Q_FULL
### Response:
(Severity: 3), (Category: OS), (Description: Too many notifications have been sent to the component. The queue to hold the notification has overflowed.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-DUMP_REQUEST
### Response:
(Severity: 7), (Category: OS), (Description: The information message for debug use.), (Recommended Action: Displayed when a process is crashed. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PORT_STATE_CHANGE_ADMIN_UP
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message indicating that the admin state of the specified port has changed to up.), (Recommended Action: This is an informational message and does not necessarily indicate a problem. This message is expected when the port's admin state is changed via CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-AUTO_ABORT_TIMER_EXPIRING
### Response:
(Severity: 2), (Category: INSTALL), (Description: The auto-abort timer is about to expire.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-3-SUB_ID_MSG_TOO_LARGE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A message from Platform Manager containing set/unset notifications for sub-interface VLAN IDs was too large and had to be dropped because enough memory could not be allocated. As a result, for a 'set' notification, QoS was not enabled for the reported VLANs. For an unset notification, QoS was not disabled for the reported VLANs.), (Recommended Action: Restart feature_mgr process. Example: In exec mode, 'process restart feature_mgr location 0/1/CPU0' This will cause all notifications to be delivered to Feature Manager again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-3-DEBUG_INIT_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The process could not start the debug event. Hence the debug event could not be created.), (Recommended Action: For further detail contact the Cisco technical support representative with the gathered information and the exact error message as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-CBC_REFRESH_PWR_SEQ
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CBC has detected there there is a CRC check failure in the power sequencers on this card and attempting to reprogram the sequencers in error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-PROC_AVAILABLE
### Response:
(Severity: 3), (Category: OS), (Description: System manager process is not available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-TIMEOUT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The system has encountered an error while refreshing SFP port.), (Recommended Action: Replace with a Cisco supported SFP If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_SYSMON-3-PROC_CNT_MINOR
### Response:
(Severity: 3), (Category: INFRA), (Description: When number of processes/threads has crossed above MINOR Threshold Percentage.), (Recommended Action: The number of processes/threads running has increased. Determine if there are any unnecessary processes/thread available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_OUTR_VLAN_SES_THRSHLD_NO_EX
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Outer VLAN on the given access interface is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDT-2-PLUGIN_START_FAILED
### Response:
(Severity: 2), (Category: MGBL), (Description: Model driven telemetry data plugin thread start has failed.), (Recommended Action: Restart the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBAPI-3-EVM_CREATE_ERR
### Response:
(Severity: 3), (Category: SNMP), (Description: An internal operation failed. The system will attempt to recover.), (Recommended Action: Copy the message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV6_EA-3-ERR_INIT_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-FATAL_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected a fatal error.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-3-REGISTRY_CREATION_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The 802.1Q NetIO component could not necessary data structures during its initialization. Software forwarding VLAN functionality on the affected is likely not to work.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-HOLDDOWN_TIME_START
### Response:
(Severity: 6), (Category: SECURITY), (Description: TACACS+ server is unreachable or down. Server in holddown.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-TUPLE_UNPACK
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-0-ECC_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Unrecoverable ECC), (Recommended Action: Gather the data listed in 'required_info'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-ROUTE_TYPE_NONE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered when computing the route type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all - show route ipv4 <prefix> detail - show ospf routes <prefix> detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Server was unable to allocate memory. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable RSVP graceful restart?
### Response:
To enable RSVP graceful restart, use the 'rsvp graceful-restart' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp graceful-restart
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_NETIO-3-PARSE_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: The file atm_netio.rules has been modified and parsing fails), (Recommended Action: Check why the rules file has been modified. The specified line number will give a clue for failed parsing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between installing a package using the install add command versus the install activate command?
### Response:
The 'install add' command copies the package to the router's storage but does not make it active. The 'install activate' command is used to make the package active on the router. Packages can be added and activated in a single step using 'install add' followed by 'install activate' in a single command line.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBQSMGR-1-DBG_SCRIPT_REGISTRATION_FAILED
### Response:
(Severity: 1), (Category: INSTALL), (Description: The communications channel to QSU Manager is unavailable.), (Recommended Action: The process is automatically restarted, which should lead the process to recover its state, and attempt to register the same again. If this process is involved in protocol operation, then there may have been packet loss as a result of this event which requires remedial action. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-FILE_IO
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to read/write the file), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_0_FIADDR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from FIA DDR on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-1-ERP_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: SPA Bridge ASIC detected an ERP timeout, parity, or protocol error.), (Recommended Action: Restart the Jacket Process. If the problem persists, reboot the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_ETH_MGMT-3-NETIO_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error detected when initializing the netio. process will restart automatically to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-EAP_ATTESTATION_SUCCESS
### Response:
(Severity: 5), (Category: L2), (Description: Successfully verified the stamped passport provided by peer), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-SPA_PIO_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: This is an error message indicating a Hardware access error for a SPA. If this is a recurrent message, it usually is due to faulty hardware, loose connection at the SPA connector on the jacket card. Try reseating the SPA and see if the issue is resolved. If not, please check with TAC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-6-SESSION_USAGE_BELOW_THRESH
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Sessions active have fallen below 90% threshold for this Details will be given in the meesage displayed), (Recommended Action: None. System should be in stable state and all Translation should go through fine)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-3-INIT_FAILED
### Response:
(Severity: 3), (Category: MEDIA), (Description: Syncfs failed to initialize a module.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-INVALID_PLIM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This msg indicates that a PLIM type in the given slot does not match the card type; or the card/plim is not appropriate for the chassis.), (Recommended Action: Replace the BOARD/PLIM with the correct type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_PROCE_NODEID
### Response:
(Severity: 3), (Category: OS), (Description: proc nodeid error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-7-GENERIC_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A generic error occurred in Services PLIM driver. Cause of the error will be mentioned in the message displayed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you activate a software package in Cisco IOS XR?
### Response:
A software package is activated in Cisco IOS XR using the 'install activate' command, which enables the package's features on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-6-NODE_STATE_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates the node state (eg. IOS XR RUN, MBI_RUNNING). A node being a card, SPA, etc. %s - indicates the node/location in <rack>/<slot>/<instance> format %s - indicates the state), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CISCOSYSTEMMIB-3-TARGET_CFG_PROBLEM
### Response:
(Severity: 3), (Category: SNMP), (Description: error occured during config manager operation.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_EDM-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: The system is low on memory and not enough was available to complete the request), (Recommended Action: Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-3-AUTO_RECOVERY_RETRY_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Auto-recovery failed to restart on the given interface. This interface will remain in Error-Disable state until manually cleared.), (Recommended Action: Manually clear Error-Disable state on the given interface if desired, else reconfigure an Auto-Recovery period to retry. Based on the failure reason, the user may wish to reduce memory consumption or investigate other system-wide issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp graceful-restart restart-time' command in IOS XR BGP configuration?
### Response:
The 'bgp graceful-restart restart-time' command is used to configure the maximum time that a BGP speaker will wait for a restarting peer to come back up. It is part of the BGP Graceful Restart configuration. The default restart time is 120 seconds. If the restarting peer does not come back within this time, the BGP session is torn down.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_RESET_THRESH_CROSS_NOTIFICATION
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Multiple reset occurred, threshold exceeds, notification is sent to driver for proper action), (Recommended Action: Due to too many reset, the driver may reload the board or slice to recover. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-HOST_LINE_LOA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Loss of Alignment between the NPU and DSP), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-PORT_NUM_EXHAUST
### Response:
(Severity: 4), (Category: L2), (Description: PTP was unable to allocate a port number to an interface, as all available port numbers are currently allocated.), (Recommended Action: Remove PTP configuration from one or more interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-NOTHING_READ
### Response:
(Severity: 3), (Category: OS), (Description: Read of inotify file descriptor failed with specified message.), (Recommended Action: Check dumper process, show context, collect console message. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_MEM_MAP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FIA driver was unable to map the hardware of the specified ASIC instance into its memory space and therefore failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-LOGIN_AUTHEN
### Response:
(Severity: 3), (Category: MGBL), (Description: login() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISM_PD_LIB_SPA_UNSHUTDOWN
### Response:
(Severity: 6), (Category: INSTALL), (Description: The shutdown operation is being performed on the indicated SPA when fabric plane upgrade fail.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LASER_EOL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HSRPMIB-4-WARN_DEBUG
### Response:
(Severity: 4), (Category: SNMP), (Description: During initialisation of the HSRP MIB, it was not possible to register to be notified of changes to the debugging state. The MIB will continue to function, but it will not be possible to turn on debugging for the MIB.), (Recommended Action: If debugging is essential, then restart SNMP. This will reinitialize the HSRP MIB. If the problem persists, do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_LOW_TEMP_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature less than or equal to the low temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-6-MODE_FAILURE
### Response:
(Severity: 6), (Category: SECURITY), (Description: Negotiation with the remote peer failed.), (Recommended Action: 'If this situation persists contact the remote peer')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-2-PARENT_REREGISTER
### Response:
(Severity: 2), (Category: ROUTING), (Description: A RIB download client (typically bcdl_agent), reregistered from a table while it still has children referring to this table. The number of routes may no longer be insync in all FIBs. If corresponding bcdl_agent restarted just before this message was seen, this error message can be ignored.), (Recommended Action: Restart the corresponding bcdl_agent process. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLDP-5-BRANCH_MODIFY
### Response:
(Severity: 5), (Category: ROUTING), (Description: A mLDP branch has been modified.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-7-EVENT_BLOCK
### Response:
(Severity: 7), (Category: OS), (Description: An error occured while PlaceD was waiting for a messages, PlaceD ignored the error and continued to wait for more messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM_CLIB-3-MSG_GENERIC_FUNC
### Response:
(Severity: 3), (Category: IP), (Description: A call to some system function to initialize bcdls failed. ip arm consumer initialization api would return error back to the client.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_CHANNEL_TO_NBR_CREATED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic Network Control plane Channel has been ' 'created to the neighbor'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-SERVER_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server could not initialize due to above error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-VPWS_SINGLE_HOMED_PATHS
### Response:
(Severity: 3), (Category: L2), (Description: More than one EAD/EVI route was received for a single-homed (zero ESI) VPWS.), (Recommended Action: Perform network level review, and ensure the correct AC IDs are being used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTS3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-6-DISK_STATUS
### Response:
(Severity: 6), (Category: MEDIASVR), (Description: This ios_msg is raised when an ECU Disk is inserted or removed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_11_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_linux-7-FD_UNAVAILABLE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: pcmciad will spawn filesystem process and cardmgrd without standard output. This would result in no debug messages from those processes.), (Recommended Action: Please contact TAC if this happens continuously.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you configure health checks in Cisco IOS XR?
### Response:
To configure health checks in Cisco IOS XR, use the 'health-check' command followed by the test type (such as system, process, or datapath) and the test parameters such as the interval and threshold values. You can also configure actions to be taken when a health check fails, such as logging a message or restarting a process.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SHOW_NOMEM
### Response:
(Severity: 4), (Category: ROUTING), (Description: The requested display output may be incomplete due to an internal memory allocation problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-VRF_INVALID_LS_LAYER
### Response:
(Severity: 3), (Category: L2), (Description: Unable to assign VRF because logical switch is not layer3 type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-3-DEPLETION_CRITICAL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The depletion level of the specified packet resource is critical. At this level of depletion, routing protocols on the impacted node are not able to allocate packets and the software packet path will be impacted. Critical services on the node may not be able to allocate packets and thus could be impacted.), (Recommended Action: Customer should monitor depletion levels using 'show packet-memory' commands. If packet memory remains depleted for significant period of time then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-ENV_STATIC_DATA_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An environment record data processing error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering autoroute feature?
### Response:
The MPLS traffic engineering autoroute feature allows IGP routes to be automatically routed over MPLS TE tunnels. This provides IGP shortcuts using the TE tunnels. Autoroute can be announced globally for all tunnels or on a per-tunnel basis. It is enabled with the tunnel mpls traffic-eng autoroute announce command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An initialization failure occurred in FIB EA layer. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show logging show running-config show cli history detail loc <> </RP> <LC> </LC> <TECH> show tech-support location <> show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_INFRA_LIB-3-failed_to_validate_mutex
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to validate mutex.), (Recommended Action: Please contact tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_V6FIB_RP-6-VPNV6_CONTEXT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message is for recording VPNv6 global context intialization event. No action is required.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-TX_MACRO_SPEED_MISMATCH
### Response:
(Severity: 1), (Category: FABRIC), (Description: Unexpected macro type value read from ASIC. There could be a h/w or FPGA issue.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-EVPN_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: EVPN callback returned error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-HSSDFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: An automatic register for one of the HSSDs failed.), (Recommended Action: If any of these messages occur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-6-EDM_BAG_REGISTRATION_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: The process failed while attempting to register its external data manager data blocks with SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-7-SVC_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: A service API debug is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-3-ERR_INIT
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered whilst initializing the SSRP sybsystem: %s.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PPP MA process. *SUPPORT*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_VLAN_EA-3-MAX_VRRP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Configuration failed because the maximum number of VRIDs which can be programmed has exceeded.), (Recommended Action: Please capture the complete error log. Please check the data sheet for the supported configuration. Please contact TAC for any support on this)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-SYSTEM_ERROR
### Response:
(Severity: 7), (Category: HA), (Description: A call to a system function failed with the specified error code.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_SERDES-3-MUTEX_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in Serdes layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. The process can continue functioning as expected despite the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-PORT_SPEED_MISMATCH
### Response:
(Severity: 2), (Category: L2), (Description: The optic interface module was inserted on the port which does not support the speed of the optics which was inserted. The interface type would remain to the default type or the type which was present before the port was empty. in a link down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-DEVICE_DEACTIVATED
### Response:
(Severity: 4), (Category: OS), (Description: The device on the node is deactivated for onboard logging.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_11_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-6-EDM_ENCODE_FAILED
### Response:
(Severity: 6), (Category: IP), (Description: A process has requested information from ipv6_io through SysDB, probably as a result of executing a show command. The data requested could not be encoded.), (Recommended Action: Restarting sysdb process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-2-ASIC_ERROR_CIH_INIT_THRESHOLD_CARD_SHUTDOWN_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Uncorrectable asic errors occured on card and board could not be shut down), (Recommended Action: ASIC errors that are uncorrectable have occured and exceed the threshold. Card could not be shut down because of some errors. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-3-FETCH_ERR
### Response:
(Severity: 3), (Category: IP), (Description: DPM interacts with AAA for getting identity of the session. This error occurs when DPM tries to get subscriber ifhandle), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_VKG-7-ERR_BAG_REGISTRY
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-ASR9K library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NOMEM_RESET
### Response:
(Severity: 3), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition. One or more neighbor sessions have been reset to free some memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP Tx power less than or equal to the low Tx power alarm threshold. The XFP is the pluggable optics on the line cards. The Tx power threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Replace the XFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show mpls interfaces' command in IOS XR?
### Response:
The 'show mpls interfaces' command is used to display information about the interfaces that are enabled for MPLS. It shows whether MPLS is enabled, the MTU for labeled packets, the range of labels assigned to the interface (in case of per-interface label space), and the LDP neighbor on the interface.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-PROCAGENT_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed procagent initialzation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-NOTIFY_AIS_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The CFM packet handling module has detected that an AIS signal has changed (started or expired), but has failed to notify the management module. As a result, the proper handling for this event (eg generating log messages) will not take place.), (Recommended Action: If the error persists, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-5-LDP_VRF_W_SVD
### Response:
(Severity: 5), (Category: ROUTING), (Description: FIB has detected that LSD is sending labelled routes in a non-default VRF with SVD enabled on the card. This is currently not a supported feature and as such, LSD routes may be dropped on the card and may not be re-instated even after the non-default VRF becomes applicable on the card.), (Recommended Action: Please ensure SVD is disabled if LDP in a VRF is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_FSTYPE
### Response:
(Severity: 4), (Category: MEDIA), (Description: File system type is not supported on the media device.), (Recommended Action: Format the device to a supported file system if the device is not a boot device Report to TAC if the message comes from a boot device)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_0_XAUI_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error - 0 from XAUI on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-SRSP_ACTIVE_EOBC_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Standby RSP has detected an error with the active eobc link between this standby RSP and one or more line card)(s)), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_EA_VERIFY-6-POLICY_ERROR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Peformance traffic service policy verification encountered the specified error), (Recommended Action: Correct the performance traffic service policy)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-VERSION_MISMATCH_RELOAD_OPERATION_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: The node needs to reload in order to recover from version mismatch in software. However the automatic install reload could not be initiated.), (Recommended Action: Check the shelf_mgr process to make sure it is up and running properly. Check the general state of the VM to see if anything may be causing reload not to happen for Install. Collecting show tech will help further investigation on the cause. Please manually reload the node using 'hw-module location <loc id> reload' in order to complete the recovery or try manually reloading the node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-INTERNALERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please provide output from the following commands: - show tech-support routing ospfv3 detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-FLASH_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in READ/WRITE to flash memory. Exact Cause of the error will be mentioned in the message displayed. This error will block Application image launch), (Recommended Action: Do cold reboot of Services PLIM MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the link-state advertisement (LSA) in OSPF?
### Response:
Link-state advertisements (LSAs) are the packets used by OSPF to exchange topology information between routers. Each LSA contains information about the state and cost of the router's links to its neighbors. LSAs are flooded throughout the area so that all routers can build a complete topology map.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-SELF_GENERATE_FAIL
### Response:
(Severity: 3), (Category: L3), (Description: The IPv6 Neighbour Discover (ND) spoofing process (ipv6nd_lite) has generated an internal diagnostic report normally emitted only during unit test. This is not expected during production use, but does not in itself indicate a condition that will prevent the router from working.), (Recommended Action: Check for any other error messages.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
12IN1-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of the Serial 12in1 interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-PARAM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: During initialization of the Forwarding-Information-Base of the CRS platform, an unexpected parameter inconsistency has been detected. The running software should automatically recover if it isn't a hardware error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-QAD_Q_PRODUCE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT driver failed to populate qad netio egress queue), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE_CLIENT-3-ERR_CDI_BIND_RACK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in i2c driver due to cdi bind function call failed in th particular rack.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FT-6-FAN_SPEED_THROTTLED
### Response:
(Severity: 6), (Category: LIBRARY), (Description: Fantray fans need 2 fabric modules to provide enough power to run at 100 PWM. With just one fabric module, fan speed has to be throttled at lower speed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-BRIDGE_MTU_MISMATCH_CLEAR
### Response:
(Severity: 6), (Category: L2), (Description: The interface MTU now matches the bridge payload MTU.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory for the specified resource), (Recommended Action: When errors occur in jacket, it is very likely the jacket process will restart itself This is a resource starvation condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-EAIDB
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an error has occurred in IP Tunnel Execution Agent IDB. IDB can't be found or created. Particular reason is included in this message.), (Recommended Action: Please restarting IP Tunnel Execution Agent with the command <CmdBold>process restart ip_tunnel_ea location <node id><NoCmdBold>. If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-EVENTMGR_INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the CGN process on a particular node. The errors were seen during event manager operation. The process will be restarted.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL_SHM-7-ERR_INIT
### Response:
(Severity: 7), (Category: OS), (Description: Initialization of ITAL failed. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_THRESHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-MQ_SEND_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to send IPC message to IKE process. Most likely casue the process is too busy), (Recommended Action: 'contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. with the exact error message seen')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-LIST_NODE_INCONSISTENCY
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition, list node check failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_MSG_LEN
### Response:
(Severity: 3), (Category: SECURITY), (Description: Message lenght is invalid), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-CLI_ACTION_IGNORED
### Response:
(Severity: 5), (Category: ROUTING), (Description: The CLI action is ignored because the node is not active.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_DATATYPE
### Response:
(Severity: 4), (Category: SYSDB), (Description: A datatype other than one of those supported was supplied.), (Recommended Action: Use help for a list of supported datatypes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-PWR_SEQ_FAULT_LOG_SAVED
### Response:
(Severity: 4), (Category: DRIVER), (Description: The fault log saved in power sequencer device has been collected and raw data has been decoded and saved in the indicated file.), (Recommended Action: The saved file can be collected as part of 'show tech-support ccc' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_ACL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered the specified unexpected error whilst performing the specified operation on the specified access-list. As a result IS-IS's operation will not correctly reflect the contents of the ACL. This may be due to a low-memory condition but may also be due to internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE4_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE4_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_LANE_REPAIR_CHANNEL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates the channel error associated with the NP HBM memory lane repair operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_UI-3-CLI
### Response:
(Severity: 3), (Category: APP_INFRA), (Description: An unexpected error occurred while parsing the policy manager configuration command.), (Recommended Action: If the action suggested in the error message does not help, try exiting and re-entering the config mode. If this doesn't help try restarting parser_server via cli 'process restart parser_server'. Contact TAC if the problem persist, with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV4_EA-3-FAILURE1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a failure message in the ASR9K platform specific code software to indicate anomolies that are not serious failure . This failure is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect console log, traces * SH_CMD show af-ea ipv4 trace errors loc <slot number> * Also notice if the failure message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_FAN_RPM_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The FAN RPM of the satellite is currently running above/below the operating level.), (Recommended Action: The current FAN RPM values can be checked using the CLI: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. --> particularly for fan output of SAT ID. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env trace <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env trace <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPP_ASYNC_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet Async FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-3-BAD_ACTOR_INTF_NOT_CLEARED
### Response:
(Severity: 3), (Category: OS), (Description: The punt flow trap failed to completely clear the hardware settings for the 'penalty box' for the above specified interface which is using more hardware resources (i.e Bad Actor). Traffic from this source MAC may be affected. When a flow through any interface is trapped, it is tagged as a Bad Actor and will be added to 'penalty box', this box will restrict the traffic through that interface by applying penalty policing.), (Recommended Action: If traffic from the interface is affected, try flapping the interface or reloading the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp graceful-restart restart-time' command in IOS XR BGP configuration?
### Response:
The 'bgp graceful-restart restart-time' command is used to configure the maximum time that a BGP speaker will wait for a restarting peer to come back up. It is part of the BGP Graceful Restart configuration. The default restart time is 120 seconds. If the restarting peer does not come back within this time, the BGP session is torn down.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_INFO_OPER1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, operational error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-SATELLITE_CLEAR_ALARM
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The satellite has sent a notification that an alarm has been cleared.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-lsp_update_delegation_absent
### Response:
(Severity: 3), (Category: OS), (Description: LSP is not delegated to this PCE), (Recommended Action: Send update from the PCE to which the LSP is delegated)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-NULL_INIT_DATA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Protocol packet path initialization failed due to no protocol data from protocol module. Initialization is aborted and may be retried.), (Recommended Action: Restart the protocol process. 'process restart <protocol> location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-PKGMGR_DB_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: An error has been encountered by yumdb. The install infra has attempted to rebuild the rpm database and retried the command, but an error was still hit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. A system reload is recommended if this message is seen repeatedly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_LIB-2-SUPER_SPA_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: %s-Type of the critical error on SPA. %d- Return value for the above mentioned error. Unable to read hw_type for super spa.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-0-CD_IN_RESET_STATE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This message indicates that this node was parked in the in-reset state due to the reason specified.), (Recommended Action: Use hw-module loc <loc> reload command to release card from IN-RESET state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-4-DB_ATTACH
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to connect to PIRD shared memory database on initialization.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-SESSION_NOT_STOPPED
### Response:
(Severity: 4), (Category: L2), (Description: The platform failed to stop a loopback session when requested to do so.), (Recommended Action: If any problems are seen, they may be rectified by restarting the edpl_ma process using the following command: - process restart edpl_ma)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CHASSIS_RELOAD_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Chassis wide reload operation has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ERR_CREATESG
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-5-SVC_NOTICE
### Response:
(Severity: 5), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-ERR_TCAM_INVALID_REG_NAME
### Response:
(Severity: 5), (Category: OS), (Description: A Pre-IFIB region with unrecognized name is found in the TCAM. It is likely caused by a programming bug or a programming problem happened in the past.), (Recommended Action: Check the status of TCAM Manger because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-KEXE_INIT_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNLC_FPD-6-RELOAD_CARD
### Response:
(Severity: 6), (Category: OS), (Description: The Working image has been upgraded. NTA reset wont work to bring in the upgraded versions in effect. User will have to reload the card), (Recommended Action: reload the card to bring in the upgraded versions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-SETSOCKOPT
### Response:
(Severity: 6), (Category: IP), (Description: An error occurred whilst trying to setsockopt on the socket. Session will continue.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_VLAN_TAGS
### Response:
(Severity: 4), (Category: L2), (Description: The LACP protocol will not be able to run on this interface. This may be because the interface has a complex encapsulation configured, which is not supported in conjunction with LACP. Complex encapsulations include: - Matching on source or destination MAC addresses - Matching on payload ethertype - Matching on VLAN tags using the 'any' keyword. In these cases, it cannot be determined how to format the ethernet header for sending LACP packets, and hence LACP is not supported in these scenarios.), (Recommended Action: Ensure the encapsulation on the interface does not use any of the 'complex' matching criteria.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-5-MSG_NDLRSC_CPU_FAILOVER_DELAYED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When an ndlrsc CPU inst on standby DRP failsover as active, its transition to active state is delayed. This is done in order to allow the dlrsc CPU instance to failover first and thus have a predictibility in the failover sequence among CPU instances.), (Recommended Action: None; this CPU will failover to active state with a delay.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_MSG_REPLY
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to reply to its client through message channel. This could be a result of channel down or resource allocation failure.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-7-ETHSERVER_CONNECT_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicated DSC fails to open eth server connection. There is might be HB loss issue will be seen on DSC nodes. Check for CE connectivity), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_DEBUG_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error related to the debugging subsystem occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_5_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-HEARTBEAT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Heartbeat failure notification from octeons was received by the Services PLIM driver or a critical error occured in the thread monitoring heartbeat from octeons.), (Recommended Action: Do warm reload of the Services PLIM MSC. If the issue persists do a cold reboot of the same. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-6-NETIO_SET_PAK_SHAPEQ_FAIL
### Response:
(Severity: 6), (Category: QOS), (Description: Could not set the outgoing queue associated with this packet. As a consequence the packet is being dropped. During normal operation of the system, an occasional (very in-frequent) packet drop in the slow-path is tolerable.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal software error has occurred for the specified SIM Service Engine.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-LSP_CTX_NON_EMPTY_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error, where LSP context is being deleted while it has valid TLV context queued.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-EVENT_MANAGER_CHANNEL
### Response:
(Severity: 7), (Category: HA), (Description: A call to message channel create api failed. process will abort with error.), (Recommended Action: Retry the operation . If error persits, Collect system log information and Contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-2-PLATFORM_INIT_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Switch HAL configuration failed and process will respawn by its own to recover from this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-2-ERR_INVALID_THREAD
### Response:
(Severity: 2), (Category: IP), (Description: Detected single-threaded IPv6 ND code running on an unknown thread. This concurrency can result in corruption. %d/%d indicate actual tid/expected tid.), (Recommended Action: Collect IPv6 ND and check-point traces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you troubleshoot configuration inconsistencies in IOS XR?
### Response:
To troubleshoot configuration inconsistencies in IOS XR, you can use commands like 'show configuration failed' to view any configuration that failed to apply, and 'show configuration inconsistency' to identify mismatches between the running configuration and SDR-specific configurations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-4-DEV_NOLATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Errors seen on the device bus for which information was lost due to other errors or some other condition.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-3-ERR_SET_REBOOT_CAUSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The failure on setting reboot cause to syspage before performing Kernel Dump.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-ERR_DBG_REGISTER_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization of the ospfv3_uv process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_EVENT_CONN_EVM_HANDLER
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for the posix message queue. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LASER_EOL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_LIST_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the list to be returned has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_COMM_DRVR-7-ERR_SHM_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The SFE common infra driver could not initialize shelfmgr.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMACTRLR-4-WARNING
### Response:
(Severity: 4), (Category: L2), (Description: A non-fatal error occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of IMACTRLR.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-7-ERR_SEND_EGRESS_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Cannot send packet to pdma queue %s - error description %x - QAD queue id %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %x - error code), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_FSM-3-ERR_SOCKET
### Response:
(Severity: 3), (Category: L2), (Description: There is a communication problem with the PPP socket.), (Recommended Action: Restart the ppp_socket process on the node where the error is reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-BADFORMAT
### Response:
(Severity: 7), (Category: MGBL), (Description: The command entered is badly formatted.), (Recommended Action: Re-enter the command. (Use the help command to find valid entry formats.) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-MMAP_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Memory maping to get device id failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPFPGA-3-ZL301x_SPI_ACCESS_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ZL301x SPI access Failure/Success while accessing.Line is open/short.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-PROTECTION_RULE_NO_OP
### Response:
(Severity: 4), (Category: INFRA), (Description: Traffic protection rules define exceptions to the default defined for a particular set of traffic destined to Linux. Rules must have actions with the opposite sense to the parent default-action. The impacted rules will not be applied and so will have no effect on the system.), (Recommended Action: No problems should be seen. To restore consistency between the running configuration and system state, all traffic protection rules should be configured such that their sense is opposite to their parent default-action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-ROUTE_GEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred during route handling. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV4-7-HSSD_REG_FAIL
### Response:
(Severity: 7), (Category: IP), (Description: For generation of ICMP error packets, the ICMP generation library needs to register for an internal packet resource called HSSD. Since, it couldn't register for that, an ICMP error couldn't be generated.), (Recommended Action: This can happen while 'packet' process is restarting and a couple of instances of the message can be ignored in that case. If there is no restart and problems are being seen with the router not being able to send ICMP errors, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-TCB_FREE_OPEN_SOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: TCB free on open socket.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-SEND_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: A control message could not be sent from the MA to the EA. See error message for a possible reason. An interface may now be in the wrong up/down state.), (Recommended Action: Restarting the relevant SVI Manager process will prompt a resync, which should re-send the lost message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP fault management in Cisco IOS XR?
### Response:
To configure RSVP fault management, use the 'rsvp fault-management' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp fault-management
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-3-GET_PLACEMENT_LIST
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'l2vpn xconnect' command in IOS XR?
### Response:
The 'l2vpn xconnect' command is used to configure a point-to-point Layer 2 VPN (L2VPN) service, also known as Virtual Private Wire Service (VPWS). It establishes a pseudowire between two provider edge (PE) routers to carry Layer 2 traffic. The 'xconnect' command binds an attachment circuit (such as an Ethernet interface) to the pseudowire.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY-3-SIGATTACH
### Response:
(Severity: 3), (Category: OS), (Description: The filecopy_process was unable attach a handler for a signal. This could affect cleanup of open connections or allocated resources during shutdown, which could affect the filecopy_process' ability to restart in the future. The filecopy_process will attempt to shutdown in the hope that this problem is transient, and that a future attempt to start it will succeed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-FANTRAY_CLEAR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: All fans on indicated fan tray returned RPMs to operating level.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-5-LOW_MEMORY_STATE
### Response:
(Severity: 5), (Category: OS), (Description: System is running out of memory, and hence appropriate action is taken), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-MALLOC_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: THE NETIO encountered a problem of memory allocation.), (Recommended Action: Check if there are any possible memory leaks. Please provide the outputs of the following commands: - show memory compare start - Perform the required operation - show memory compare end - show memory compare report.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP to advertise additional paths in IOS XR?
### Response:
To configure BGP to advertise additional paths, you enable the feature under the BGP address family configuration. router bgp 65000
address-family ipv4 unicast
additional-paths selection route-policy SELECT-ADD-PATHS
additional-paths send
additional-paths receive
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath aigp ignore' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath aigp ignore' command is used to disable the Accumulated Interior Gateway Protocol (AIGP) metric for best path selection. AIGP is an optional, non-transitive BGP path attribute that carries the accumulated IGP metric for the path. By default, if AIGP attribute is present, BGP uses it for best path selection. This command disables the use of AIGP in best path calculation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-ASIC_INIT_ERR_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Crossbar fabric interface ASIC-1 failed during init.), (Recommended Action: Reboot the board. If the error persists, contact TAC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-PLATF_UPD_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: When FIB processes forwarding updates, it may have to program the underlying platform hardware. A failure occurred during this programming. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can BGP be used to migrate from one ISP to another with minimal downtime?
### Response:
BGP can facilitate ISP migrations with minimal downtime by allowing routes to be selectively advertised to the old and new ISPs during the transition. The local preference can be manipulated to prefer the old or new path. AS path prepending can be used to influence inbound traffic. Communities can also be used to control advertisement of routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NCS4K_4H_OPW_QC2-3-MDIO_OPERATION_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MDIO Operation failed), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-NO_MEM_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: One of the memory allocation routines such as malloc() fails.), (Recommended Action: Use 'show memory summary [location <node-id>]' command to determine the state of the system memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_INFO_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error information related to rate limitor in platform FIB), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_PIDB-2-INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the pidb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Please collect output of the following commands: show log show pidb trace show pidb error show pidb debug)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-DEBUG_EVENT_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to the failure on debugs events. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-OPERATION_FAILURE_WITH_ERR_ID
### Response:
(Severity: 3), (Category: INFRA), (Description: Specified install operation in the error message failed. This will display the error code), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-LC_EOBC_SEND_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This line card has failed to transmit a heartbeat to a RSP over EOBC.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-NODEID_TO_IP_ADDR_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cant able to convert my nodeid to ip address, Either an invalid location is being queried, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out. %d - gives the id of the node on which the error occurred. %s - indicates the location of the error. %s - indicates the error message.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-BLG_TX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller FPGA reported that data it received from crossbar fabric arbiter had parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to initialize a device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth overflow feature?
### Response:
The MPLS TE auto-bandwidth overflow feature allows auto-bandwidth to react more quickly to sudden traffic spikes by triggering an immediate bandwidth adjustment when the measured rate exceeds a configured overflow threshold. It aims to ensure the tunnel can accommodate bursty traffic patterns.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-6-DB_MIGRATION
### Response:
(Severity: 6), (Category: SECURITY), (Description: tamsvcs process successfully migrated the TAM DB from SWTAM to Hybrid-TAM.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-INVALID_YANG_METADATA
### Response:
(Severity: 4), (Category: MGBL), (Description: A problem was encountered while trying to read in Yang metadata while the Central Config Validator (CCV) was initializing. Attempts to modify system configuration while CCV is disabled will not be validated.), (Recommended Action: The failure to read in the metadata should be investigated, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INTF_NAME_NULL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Interface name send for parsing is NULL.'), (Recommended Action: Collect the nvgen debug output and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-CFG_PORTAL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath was unable to configure a portal. This error could occur for two reasons. 1. The system is low on resources. 2. A hardware error or an error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-INVALID_INTF
### Response:
(Severity: 6), (Category: IP), (Description: 'The specified source interface can not be used. Will use default interface'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-3-CHKPT_XFORM_UNSUPPORTED_TYPE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The RSVP checkpoint table translation library was invoked with an unsupported translation type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-INIT_CONFIG_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The Network Processor didn't get the config complete signal before booting up, it may have booted up with incorrect parameters), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_SYSMGR_PROC_READY
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an error while reporting process ready to sysmgr. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_DPM-3-INVALID_MSG
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A SDACP discovery message was received on the interface, but was malformed and could not be decoded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-INVALID_PARAM
### Response:
(Severity: 3), (Category: FABRIC), (Description: A null or invalid parameter was passed to the above named function. This *may* indicate a serious problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-5-PRE_FPD_OP
### Response:
(Severity: 5), (Category: FABRIC), (Description: Field upgrade of the fabric PLD while the fabric card is in the chassis. Due to a bug in the superstar ASIC, field upgrade of the PLD cannot be done while the card is in service and fabric plane is UP. It is required to halt the ASICs on the board and isolate the plane while the PLD image is being loaded via the JTAG interface. This message posts a notice to indicate that the devices will be halted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB-5-ERR_CONT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates an error occurred beyond which execution of the arbiter driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_3_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-DSCP_OPTION_DEPRECATION
### Response:
(Severity: 6), (Category: INFRA), (Description: DSCP4 and DSCP6 CLI options will be deprecated since they are no longer supported by ISC DHCP Client. They will be removed in the future.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-WARNING_INFO
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv6 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|ipv6] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-7-ERR_DEBUG_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID Allocator failed to initialize debug. The FGID component and the System should still continue to function as normal, with the exception that the debugs will not be available for fgid_allocator process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-2-CLEARED_CONFIG_INCONSISTENCY
### Response:
(Severity: 2), (Category: SYSDB), (Description: Sysdb detected possible configuration inconsistency and successfully cleared it.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL2-3-MSG_GENERIC_FUNC
### Response:
(Severity: 3), (Category: OS), (Description: A call to some system function to initialize bcdls failed. bcdls process would shut down when this occurs and will be respawned by the producer.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-3-MACSEC_CONFIG_CONFLICT
### Response:
(Severity: 3), (Category: L2), (Description: macsec eap is not supported with multi-auth host mode.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: OS), (Description: It's likely that the system is running low in memory.When this issue happens, it will trigger an automatic restart of pifibm_server_lc process.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV6_EA-3-ERR_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 show memory summary </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> show memory location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-DSP_TEMP_OOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: --), (Recommended Action: Turn off the router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-INTERNAL_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: ZTP likely hit an unexpected error.), (Recommended Action: Inspect the error from ztp logs. The error information can be displayed through the following command: <CmdBold>show ztp log<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-NULL_PTR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An internal error has occurred in an application that has caused it to pass invalid data to the Package infrastructure. The current request or operation will not be carried out.), (Recommended Action: Retry the command.If it fails, retry the command after restarting the 'instdir' process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_ABORT_NODE_DOWN
### Response:
(Severity: 1), (Category: INSTALL), (Description: ISSU operation aborted because the specified node was not ready.), (Recommended Action: The reason for this issu operation failure has to be analyzed. Check the issu operation log by 'show issu director trace <all>' and 'show issu' to understand the reason for the operation abort. Collect the show tech logs by running 'show tech-support issu' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATE_OUT_OF_SYNC-6-MONITORING_INTERVAL_OVERRIDEN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: On a certain type of ASR9k linecards, different step values are supported in monitoring interval duration configuration. When unsupported value is configured, the closest supported value will override user configuration.), (Recommended Action: No action required. This is informational message to remind user of the fact that system behavior will be slightly different from what is configured by the user.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IP_EA-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An initialization error has occured for IPv4 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MAC-3-NP_TX_FIFO_RECOVERY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: An inconsistency in the NP Tx FIFO has been detected. An error was detected while the system was attempting to recover from the condition.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-PROC_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: BFD proc SM failed because of the timer init failure.), (Recommended Action: Restart corresponding bfd process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_SOCKET-2-PAK_CLNT_ERR_CLNUP
### Response:
(Severity: 2), (Category: L2), (Description: The cleanup API failed due to some reason. The argument represents the reason for the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect required info and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-7-MLACP_TLV_CAPTURE_STOPPED
### Response:
(Severity: 7), (Category: L2), (Description: TLV capture has been halted on the specified ICCP group due to lack of buffer space. If further capture is required, the current TLVs must be cleared (using the <CmdBold>clear mlacp tlv-capture<NoCmdBold> command) and TLV capture explicitly restarted. Captured TLVs may be viewed using the <CmdBold>show mlacp tlv-capture command<NoCmdBold>.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_RSI_SRLG_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register or unregister with RSI for SRLG notifications on the specified interface. IS-IS will reset RSI connection and retry.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-LC_EOBC_NO_RSP_UP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This line card found there is no RSP present in the system.), (Recommended Action: This condition should not last long, the line card should reset. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-MISWIRED
### Response:
(Severity: 6), (Category: L2), (Description: The Mis-Wiring Detection feature of Ethernet Link OAM has detected a mis-wiring situation. Mis-wiring occurs when the TX wire of an interface is not connected to the same remote interface as the RX wire.), (Recommended Action: Check the wiring of the specified interface. By setting the mis-wiring action to 'log', and using the packet debugging facility of Ethernet Link OAM ('debug ethernet oam packets'), the MAC addresses of the source of packets can be used to identify where the links are.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-3-ERR_DEBUG_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID BCDL Consumer was unable to initialize debug. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-REBOOT_CMD_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: Error message that the reboot command failed to execute or complete), (Recommended Action: Collect System log and show-tech processmgr)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SERVER-7-ERR_ATTR_DETACH
### Response:
(Severity: 7), (Category: OS), (Description: Failed attr set detach for thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-2-CRITICAL_ERROR
### Response:
(Severity: 2), (Category: MGBL), (Description: A critical error was encountered. The failure of this can be critical to general system operation. If the same error is seen more than 5 times, contact Cisco TAC support because a reboot of the node may be required.), (Recommended Action: Provide the message details to Cisco Support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-SYSDB_COID_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to convert a conn to a coid while starting the indicated subsystem. This generally can only occur when starting up.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-VERIFICATION_DB_INCONSISTENCY
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A database inconsistency was noticed in an existing entry in verification database, when applying acl on another interface), (Recommended Action: Reload the affected lc.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_HW_PROFILE_SOC_PROPERTY_MISMATCH
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. Mismatch found between user configured value and the value used to set soc sal property. Needs attention with RSP card reload.), (Recommended Action: System is inconsistent. Need to reload RSP card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_CHUNK_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error in allocating memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_FULL_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 1 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-NODEID_EXTRACT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-EDM_LIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-SYSDB_EDM_INIT_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Falied edm initialization. EDM is very important for OBFL to function. This will restart the process.), (Recommended Action: If the issue is seen after restart then, collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD_LIB-5-LABEL_COVERAGE_BELOW_THRESHOLD
### Response:
(Severity: 5), (Category: ROUTING), (Description: Threshold configured for RCMD Label Coverage monitoring was reached.), (Recommended Action: Check the Neighbour, Adjacency and Label Received information for the Remote Nodes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-CREATE_GROUP_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: 'Unable to create GSP group.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-SHUTDOWN_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shelfmgr timed out waiting for the given process to gracefully shutdown the given card.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV-7-MSG_INIT_MUTEX
### Response:
(Severity: 7), (Category: ROUTING), (Description: Process failed to initialize a necessary system lock required to facilitate debugging and display of database results. This may be occurring due heavy resource utilization on the system.), (Recommended Action: Wait a few minutes and attempt to restart the LSPV_SERVER process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_13
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-7-CHECK_LOG
### Response:
(Severity: 7), (Category: OS), (Description: System event occured requiring that specified log to be checked for important information), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-PCL_CSLOT_SYNC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Sponge encountered a PCL internal error. The asic will be reset to recover from this error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NSR_PACKET-2-ERR_TRIMMING_HDR_FROM_PACKET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message tells is there was an error in trimming the header from the packet.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cpposlib-3-CLEAN_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: A function failed to cleanup.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-3-ERR_NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: The VRRP process was not able to allocate the memory that it needed to complete the operation. VRRP functionality may be reduced until the problem is resolved.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-DUP_KEY
### Response:
(Severity: 7), (Category: HA), (Description: A client of the checkpoint library attempted to create an object with a key that was already in use.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-VCCINT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: VCCint out of range), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AMT-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-3-MMAP
### Response:
(Severity: 3), (Category: L2), (Description: mmap() system call failed to map the device physical address.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECURE_VAULT-6-CORE_START
### Response:
(Severity: 6), (Category: SECURITY), (Description: The Secure Vault process has been enabled and the core elements have been started successfully.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-TABLE_OPERATION_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-ADJCHANGE_DETAIL
### Response:
(Severity: 5), (Category: ROUTING), (Description: A BGP neighbor has either come up or gone down. This message appears only if the <Bold>bgp log neighbor changes detail<nobold> command is configured for the BGP process. This is the detailed variant of the neighbor state change message. Included in this message is a list of AFI/SAFI which were advertized (supported) by each end of the session and are common to both. The AFI/SAFI values are defined in RFC 1700, RFC 4760.), (Recommended Action: This informational message normally appears as routers and BGP neighbors go up or down. However, unexpected neighbor loss might indicate high error rates or high packet loss in the network and should be investigated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-PROCESSING_FREE_ENTRY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified error happened during processing of the delay freed entry.), (Recommended Action: Please collect output of the following commands: show platform show platform vm show log show process blocked location <> show process fib_mgr location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_UCORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE uncorrectable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-RESET_RECOVERY_DISABLED
### Response:
(Severity: 3), (Category: INFRA), (Description: When the Ethernet Switch Driver (ESD) process encounters certain switch errors, it initiates a switch reset recovery operation. This involves resetting the switch and then exiting the ESD process so that it is restarted by the process manager. When the reset recovery operation has been disabled via process command line options, ESD does not take action to recover from the failure so that the problem can be investigated further.), (Recommended Action: Switch reset recovery is typically disabled in order to reproduce and investigate a switch failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-5-RECOVER_LOG
### Response:
(Severity: 5), (Category: OS), (Description: SSM Process detected a failing service. No recovery action taken.), (Recommended Action: Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-6-CFLCT_NO_LONGER
### Response:
(Severity: 6), (Category: IP), (Description: The IP address specified in the message previously conflicted with other configured IP addresses on some portion of the network portion of their IP addresses. The IP address no longer conflicts.), (Recommended Action: None. This is an informational message indicating a return to a correct consistent configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-3-GEN_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_8_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-INVALID_METRIC
### Response:
(Severity: 4), (Category: ROUTING), (Description: Metric 0 is not allowed on transit links by RFC2328. Forcing SPF to use metric 1 instead.), (Recommended Action: Prevent the sourcing router from advertising transit links with metric 0 by reconfiguring it or installing a software update)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-5-CONTROL_CODE_ERROR
### Response:
(Severity: 5), (Category: ROUTING), (Description: An error has been sent by the session responder. Additional information regarding the error can be found in RFC 6374 section 3.1. The session has been stopped until the recommended action is taken.), (Recommended Action: Once the error has been resolved it may be cleared using clear performance-measurement delay interfaces <interface name>. The session will be resume once the error is cleared.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-JACKET_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_spa_server process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process cctl_spa_server location <>' to verify that the process is up and running.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-ERR_INVALID_HW_POLICE_CIR_CBS
### Response:
(Severity: 4), (Category: OS), (Description: Policer Rate causing CIR (kbps) and/or CBS to exceed max value in HW.), (Recommended Action: Reduce the policer rate to make CIR/CBS within 32-bit value in kbps.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOL_MAPPERA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify the status of an L2VPN pseudowire?
### Response:
To verify the status of an L2VPN pseudowire, use the 'show l2vpn atom vc' command. show l2vpn atom vc
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-4-ERR_ASIC_SN_LINK
### Response:
(Severity: 4), (Category: FABRIC), (Description: CCSQ, cpuctrl net interface Rx FIFO last sync.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_MCAST_JOIN_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS was unable to join the specified multicast group on the specified interface, Will retry again.), (Recommended Action: Restart the affected interface and, if the problem recurs, the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-4-PROGRAM_ERRORED_POLICER
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to program the flow policer.When this issue happens, it will trigger an automatic restart.), (Recommended Action: Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD-7-SPECIFY_PLIM_INTERFACE_RETRIES_COMPLETE
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: All queued retries from forwarder to its NetIO DLL have been completed successfully. The two are now in sync and all slow-path forwarding should be operational.), (Recommended Action: None - this is an indication of an error situation clearing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_PKT_F1_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 1 multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-SYSDB
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when accessing the system database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-EEPROM_PROTOCOL_EVENT_CONN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_6_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the primary purpose of the IS-IS routing protocol?
### Response:
IS-IS is an IGP used to distribute IP routing information throughout a single autonomous system (AS). It is a link-state protocol that uses the Shortest Path First (SPF) algorithm to determine the best path to a destination.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMS-3-EMSD_FAILURE
### Response:
(Severity: 3), (Category: MGBL), (Description: emsd encounted failure.), (Recommended Action: check if emsd was started with appropriate configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIAD-7-RESTART
### Response:
(Severity: 7), (Category: PLATFORM), (Description: pcmciad died and had come back up. It is killing children spawned by old pcmciad so that it can respawn new ones.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture console log and process core of process pcmciad if available.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-6-EA_DEBUG_INIT_FAIL
### Response:
(Severity: 6), (Category: QOS), (Description: Debug initialization failed within EA. Debugs may not be printed), (Recommended Action: Try restarting QoS EA process get the JID by 'show processes qos_ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-6-RESYNC_PROFILE_INVALID
### Response:
(Severity: 6), (Category: INFRA), (Description: The SLA Client Library is discarding a profile that was found to no longer be valid during a resync. Any operations using this profile shall be suspended and their associated metrics removed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-TIMER
### Response:
(Severity: 4), (Category: L2), (Description: PTP MA encountered an error using the timer wheel library. The error message describes what operation has failed and why it failed. The error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PTP MA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_DEBUG_INIT_EVENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-MPA_EJECTOR_OPEN_POWERDOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shutdown command received for MPA due to open ejector), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-AUTHENTICATE
### Response:
(Severity: 7), (Category: MGBL), (Description: An error occurred invoking an AAA function. The details are in the error string), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-CTX_DOUBLE_FREE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The identified client attempted to free the context which has already been freed.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install verify process command in IOS XR?
### Response:
The 'install verify process' command is used to verify that all the necessary processes are running after an installation operation. It checks the status of critical processes and reports any issues found.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_LCPM_SHOW-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: VKG_LCPM_SHOW encountered an error), (Recommended Action: Please enable 'debug sysdb access ...' and capture the output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-NO_TRANSLATOR
### Response:
(Severity: 7), (Category: HA), (Description: A required translator was not loaded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-PTHREAD_CREATE
### Response:
(Severity: 3), (Category: MGBL), (Description: Unable to create exec's event handling thread), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLUSTER_CLM-6-UPDN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link to the RSP control plane switch has change state.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show nv edge control control-link-protocols location <loc in msg><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show nv edge control control-link-protocols location <loc in msg><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-FORWARD_PACKET_TO_UNALLOCATED_QUEUE
### Response:
(Severity: 3), (Category: L2), (Description: Egressq driver detected that packets were sent to an Egressq queue which is unallocated. These packets will not be serviced and will remain in the queue until this queue is allocated and becomes active, or asic reset or linecard reload.), (Recommended Action: If this message appears more than once in response to the specific action taken or if the message indicates a large number of bytes (more than 10MB) in an unallocated queue(s), Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_CHANNEL_TO_NBR_REMOVED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic Network Control Plane Channel to neighbor ' 'is removed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-0-INIT_RETRY_SUCCEEDED
### Response:
(Severity: 0), (Category: MGBL), (Description: An error was previously encountered while initializing one of the critical modules of the configuration manager server. However, the initialization was retried and succeeded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-ERROR_HW_IMDR
### Response:
(Severity: 1), (Category: FABRIC), (Description: Ingressq Driver encountered an error during imdr event. This may have been caused because expected or unexpected software and hardware errors. In any case, imdr on the line card will be aborted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-WRITE_REG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Write to register has failed.This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_INTERRUPTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: npu_server has restarted while NP hard reset is in progress. The hard reset will re-start to recover the NP), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DCL_LIB-2-NULL_PTR
### Response:
(Severity: 2), (Category: HA), (Description: An expected data pointer was not found.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-2-TMPORT_PROG_ERROR
### Response:
(Severity: 2), (Category: QOS), (Description: Unable to program tmport object for an interface. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_AAA
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the AAA service. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary problem communicating with the AAA server, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR1_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-1 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_NH_PACK
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected nh notification packing error occured.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-3-SERVER_INIT
### Response:
(Severity: 3), (Category: L2), (Description: The initialization of the DLL from the server side failed due to the indicated reason.), (Recommended Action: None. The initialization will be retried automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-VC_EXISTS
### Response:
(Severity: 3), (Category: L2), (Description: The DLCI is unique per 'main' interface and this dlci is already used), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-DAEMON_ERR_SYSDB_BSCAN
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while using SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-DB_FREE_LAST_COMMIT
### Response:
(Severity: 6), (Category: MGBL), (Description: Even last commit is deleted to free up space for next commit.), (Recommended Action: Delete any unnecessary files from the config disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-GROUP_ADD_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace group error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace group error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPI4_SYNC
### Response:
(Severity: 4), (Category: L2), (Description: Failed to synchronize SPI4 bus between SPA bridge controller and packet processing engine), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. before reloading the line card If this problem persists, reload the line card using <CmdBold>hw-module location <>/<>/CPU0 reload<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-BIND_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'CTRLIO Connection establish failed.While opening' 'event manager connection for sending data.'), (Recommended Action: 'Connection establishment will be retried by ISSU manager.' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show isis mpls traffic-eng tunnel' command in IOS XR?
### Response:
The 'show isis mpls traffic-eng tunnel' command is used to display information about how IS-IS is interacting with MPLS TE tunnels. It shows the tunnel name, the destination, the cost, and the path used by the tunnel. This command is useful for verifying that IS-IS is considering TE tunnels in its path calculations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-RULES_NO_ID
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A rule with no static id is found in rules file. Every rule should have a static id assigned to it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_VRF-3-NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: A notification of a configuration change could not be applied, leaving the internal data structures inconsistent with the configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_MSG_GET_SCOID
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to retrieve its local connection ID for a client attached to the specified channel. This is an internal programming error.), (Recommended Action: Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-BUNDLE_PINDOWN_REJECTED
### Response:
(Severity: 2), (Category: FABRIC), (Description: This cmd should be configured only in fretta chassis containing Jericho cards only), (Recommended Action: Remove the config on J2 native platforms.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-USER_RESET_REJECTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the node is unable to comply with a requested user reload request.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-CLUSTER_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The cluster is configured without the necessary cluster license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-BLOCK_PROTECTION_DISABLED
### Response:
(Severity: 4), (Category: DRIVER), (Description: Block protection should not be configured if we are running non-secure boot image. This can happen in two scenario: - User used iofpga_write_bootflash without '-d' option so after downgrade to non-seecure boot first article image, the flash was still protected. - The flash is a SPANSION part that was bad configured, so it is protected by default after every power-cycle.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_0_FIA_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error from FIA for NPU-0 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-SOCK_SET_NAME
### Response:
(Severity: 3), (Category: ROUTING), (Description: An operation failed during packet reception.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SPI_DATA_CHECK_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: The power-on switch programming from the SPI flash based configuration is in-correct.), (Recommended Action: Check SPI flash programming and install image with correct programming.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G709-4-log_overflow
### Response:
(Severity: 4), (Category: L2), (Description: The logging buffers have overflowed, and reached a point were there is no buffers available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-INTERFACE
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS could not initialize its interface.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-3-CHKPT_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: The error occurred due to failure in checkpoint creation either due to the checkpoint were tried to be written on non-active node or due to some internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_QAD_SET_WM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to set the watermark of the indicated qad queue. This should be because of some issues with the qad queue %s - high or low watermark %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_MEM
### Response:
(Severity: 3), (Category: IP), (Description: Cannot allocate memory to carry out an important task), (Recommended Action: make sure that there is enough memory then restart ipv6_nd)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-2-AO_DUPLICATE_ID_ON_OVERLAPPING_KEYS
### Response:
(Severity: 2), (Category: IP), (Description: Same Send ID or Receive ID is NOT valid to be configured across the keys which has overlapping send or accept lifetime respectively. User has mis-configured the key and it does not meet above crieteria. TCP-AO will not use this key for any new connection, existing connection will continue to use it till send lifetime.), (Recommended Action: Please correct the configuration. No need to re-configure it under BGP or to clear BGP neighbors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-PCIE_TX_FIFO_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: CIB PCIe Tx FIFO multiple bits error.), (Recommended Action: Reset the board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-2-OOR_ROUTES_RED
### Response:
(Severity: 2), (Category: ROUTING), (Description: MFIB on the node has detected the number of multicast routes has exceeded the prescribed limits and new routes have been blocked.), (Recommended Action: Take immediate action to delete multicast routes from the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-6-AUTHEN
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: A VPDN session has been terminated due to authentication-related error), (Recommended Action: Please examine the user credential against AAA authentication database such as RADIUS profile. Also check similar authentication info at peer side such as local authentication info on LNS or RADIUS profile used by LNS)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-4-DEPLETION_WARNING
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The depletion level of the specified packet resource has reached warning level. If the depletion level does not improve then routing protocols on the impacted node will not be able to allocate packets and the software packet path will be impacted. At warning depletion level, critical services on the node should still be able to allocate packets and thus shouldn't be impacted.), (Recommended Action: Customer should monitor depletion levels using 'show packet-memory' commands. If packet memory remains depleted for significant period of time then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-EVENT_CONN_NOTIFY_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: During initialization, IS-IS failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-BADLSATYPE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The router received an LSA with invalid LSA Type. The cause is either memory corruption or unexpected behavior on a router.), (Recommended Action: Check both the sending and receiving routers for memory corruption. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ACTIVE_GRANGE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an interface in Cisco IOS XR?
### Response:
To configure an interface, enter interface configuration mode using the 'interface' command. RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-if)#ipv4 address 192.168.1.1/24
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-MEMORY
### Response:
(Severity: 3), (Category: SECURITY), (Description: radiusd has failed to allocate the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-SWITCH_DATA_INTEGRITY_ERROR
### Response:
(Severity: 6), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected a data integrity event, whenever Parity/ECC memory error is occured on switch. switch will be reset when error counter increases the threshold value. For some critical memory threshold value can be 0.), (Recommended Action: To determine why this problem occurred, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support ' 'control-ethernet' and 'show tech-support ctrace' commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_LASER_CASE_TEMP
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-6-PMBIST_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the NPU Driver to indicate a PMBIST operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-EDM_REG
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to register/unregister path/port into sysdb_edm got failed. It will also print reason of failure as well.), (Recommended Action: Collect following outputs: - show logging - show tech-support sysdb - show sonet-local trace info location <> - show sonetmib trace location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-PROFILE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error from performance profiling action.), (Recommended Action: Please collect output of the following commands: show platform show platform vm show log show process blocked location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-MANDATORY_REBOOT_ABORTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Ingressq driver failed to initialize the device resulting in the restart of the Ingressq driver process.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the ingressq driver is up and running by executing the following command at the CLI of the active RP: 'show process ingressq location < >' If it is still non-operational, enable the following debugs of the ingressq driver process: error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events and restart the driver by executing the following command at the CLI of the active RP: 'process restart ingressq location < >' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXMGR-3-CORR_ECC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCIE device correctable ECC error), (Recommended Action: This error is a momentary error and software should be able to correct it. No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-INVALID_PLATFORM_TYPE
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver cannot handle the detected CCC platform type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-4-OPERATION_ISSU_ABORT_STARTED
### Response:
(Severity: 4), (Category: INSTALL), (Description: The ISSU operation with the given identifier has aborted. Further information on the reason for the abort may be provided by the output of 'show issu'.), (Recommended Action: The ISSU will be held following an abort to enable system level triage. When complete issue command <cmdBold>install activate issu abort cleanup<noCmdBold> or <cmdBold>install deactivate issu abort cleanup<noCmdBold> (as appropriate) to restore the system's RP redundancy and enable another ISSU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-DB_INVALID_FREE
### Response:
(Severity: 3), (Category: L2), (Description: An internal inconsistency was identified while performing some operation on the database. The process will attempt to recover a consistent state, and should be able to continue operating. It is possible that some parts of the dataplane may become out of sync.), (Recommended Action: If additional problems are observed then restarting the process may help to restore the system to a consistent state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-3-ERR_FIM_REG
### Response:
(Severity: 3), (Category: L2), (Description: While initializing the POS component, the Fault Injection module (FIM) registration got failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - Check for memory usage, this is a very rare case)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-APIV_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MGMT_TTY_DETAILS_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The show line command was unable to get details about the mnemonic for the TTY.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPA_UPDATE_NULL_BAY
### Response:
(Severity: 4), (Category: L2), (Description: Null pointer to data structure when attempting to update SPA status), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. before reloading the line card or spa. Try to recover from this error by reloading the SPA with <CmdBold>hw-module subslot <>/<>/<> reload<NoCmdBold> or reloading linecard with <CmdBold>hw-module location <>/<>/CPU0 reload<NoCmdBold> If this problem persists, please report it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-MAX_IMPORT
### Response:
(Severity: 3), (Category: ROUTING), (Description: There is a hard coded limit on the number of tables that a route may be imported into. This limit has been exceeded, so the route may not be present in some of the importing tables. The limit is such that this message should not be seen under normal operation.), (Recommended Action: Review the configs and make necessary changes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Overload Bit (OL bit) in IS-IS?
### Response:
The Overload Bit is used to signal that IS-IS will advertise its LSPs with the OL bit set for a period of time. When the OL bit is set on a new router that comes online, other routers will route around it until its tables converge. The OL bit is then cleared and traffic is routed normally.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-ERR_RESOURCE_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Allocation of the specified resource failed because of a low memory condition. This could affect the protocol functionality.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands and preferably restart the OSPF process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_EA-3-PLAT_UPD_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Platform update failed.), (Recommended Action: restarting ipv6_ea may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_1_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-INTERRUPT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The PLIM process failed to handle an interrupt.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. The most common type of failure is an XFP OIR.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-CFG_BATCH_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured when applying a batch of configuration changes. PVSTAG may not operate correctly following this error.), (Recommended Action: Unconfigure the affected configuration, commit the change, then reapply the configuration. If a failure is still seen, it may be possible to resolve it by restarting the pvstag-io process on the affected line card using the 'process restart pvstag-io location ...' command. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY-3-NOMEM
### Response:
(Severity: 3), (Category: OS), (Description: No memory to perform edm or bag operations.), (Recommended Action: This indicates a low memory condition. Collect memory stastics using following command. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show process memory <pid><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show process memory <pid><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An unexpected condition encountered.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_EDM-3-SYSDB_BAG_ENCODE_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 Management Agent encountered failure in encoding the bag that is supposed to carry encoded information to be passed on clients of IPv4 MA. Typically the client is a managebility agent like exec spawned by show CLI. As a result of this error the client may not receive the intended information from IPv4 MA. If it is a managebility request that triggered this, the request may be retried. Typically this error is caused if there is mismatch between the bag format and the information to be encoded. At other times the error might be due to process' memory corruption or low memory.), (Recommended Action: Collect the output of show tech-support, show ipv4 ma trace location <> when this message is seen. Identify if possible which manageability requests triggers this message. Most likely it would be one of the show ipv4 CLIs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-NSR_CONFIG_ENABLE
### Response:
(Severity: 5), (Category: ROUTING), (Description: ISIS nsr is either configured, or deconfigured, or enabled or disabled. In the ISSU case, nsr can be enabled but not configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700-0-EVT_INIT_FAILURE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The CPU Control driver failed to initialize the event manager. The effect is that the line card may not function or may not function appropriately. The CPU Control driver provides low level services on the SIP 700 Line Card (LC). These include, among other things, access timeout interrupt services and bus parity error interrupt services. The CPU Control driver relies on an event manager to communicate with other components on the SIP 700 LC. If event manager services are not available then the driver process is exited, respawned and the initialization retried. The CPU Control driver is a mandatory process. If the initialization continues to fail after several retries the LC will not properly boot and will reset itself. This error is generally indicative of a larger LC-wide problem. %s - description of the specific failure encountered %s - error detail, if appropriate), (Recommended Action: This error is unlikely to occur by itself nor is it likely to be the root cause of the problem. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUMP-6-GRACEFUL_RESTART
### Response:
(Severity: 6), (Category: ROUTING), (Description: RUMP is restarting because the corresponding RIB proc restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-BAD_RSVP_MSG_RCVD_AUTH_KEY
### Response:
(Severity: 5), (Category: ROUTING), (Description: The router received an RSVP message with a bad integrity digest. RSVP discarded the message because the digest verification failed. The received key ID specified is not currently active/configured.), (Recommended Action: Check the configuration on the router and sending system to make sure that the authentication configuration is compatible. Especially ensure that the configured key ID's match and are active/enabled.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-4-OOR_YELLOW
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a severe error message in the OFA module to indicate high usage of OFA resources.), (Recommended Action: Please collect the OFA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-BOOT_IMAGE_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to install image via ZTP.), (Recommended Action: Inspect the error from install logs. The error information can be displayed through the following command: <CmdBold>show install log id <id number> detail<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-6-BCM_DVC_EVENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: BCM T2+ device has notified about an event which may or may not be of ciritcal severity. In case, it is critical prm_server will recover on it's own. No explicit action to be taken.), (Recommended Action: No action needed from user.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_BAD_EVENT
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-INIT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging | inc err<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging | inc err<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes igmp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes igmp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_CONST_BP_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-0 is constantly backpressuring bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTS-6-INFO
### Response:
(Severity: 6), (Category: IP), (Description: An informational message about an event that occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_GBL_CFG-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: The PPP GBL CFG process failed to initialize correctly.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-SHMWIN_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The SSE QoS EA module encountered a shared memory error. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_DM_INTR_VM_IFIFO_ORUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_DM_INTR_VM_IFIFO_ORUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-ALARM_INDICATION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Alarm indication received from CBC. This may be a serious failure (example: power sequencer failure), however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Provide the following CLI: (admin)# show env Use the pid from canb-server output to look for matching pid in the pfm output. If the alarm indication does not clear within 30 minutes, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-AIPC_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-WARN_BNDL_MBR_ADD
### Response:
(Severity: 4), (Category: ROUTING), (Description: For various reason PD can return error, we will retry later to see if PD can handle the update.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-NETLINK_MSG_ALLOC_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: libnl failed to allocate a message for querying the interfaces in a network namespace.), (Recommended Action: If the system is experiencing memory exhaustion, resolve the underlying issue then restart the process. If the problem persists, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-3-COMMS_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while initialising the Comms module. ARP has scheduled a retry for this operation. ARP will not be able to synchronise data between the V1 and V2 process until this is resolved.), (Recommended Action: As there is a retry mechanism in place the process may recover by itself. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-4-RATE_LIMIT_WARNING_MP_HIGH_WATERMARK
### Response:
(Severity: 4), (Category: L2), (Description: BFD has allocated 90 percent of its multipath-specific packet per second allowance or maximum number of BFD sessions on every multipath-configured linecard in the system), (Recommended Action: Either configure new BFD multipath linecards or limit the number of new BFD sessions for the multipath-configured linecards.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-INV_CONN_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: Indicates that MLAP will not be able to rise alarms on any faults.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-6-ENFORCE_METERED_USAGE
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing is enabled with post-paid billing method.), (Recommended Action: 'INFO')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-ASYNC_SOCKETS_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: IP), (Description: A client has performed an operation in the mgmt VRF on an async socket. This is not supported.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-INSTORCHAGT_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Orchestration Agent (instorchagt) failed to start correctly), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOR-7-NOMEMORY
### Response:
(Severity: 7), (Category: INSTALL), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV6_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-INVALID_PID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Protocol packet path initialization failed due to invalid protocol ID provided by protocol module. Initialization is aborted and may be retried.), (Recommended Action: Restart the protocol process. 'process restart <protocol> location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-BADMAGIC
### Response:
(Severity: 3), (Category: SECURITY), (Description: 'An internal software error.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-FILESYSTEM_SYMLINK_MODIFIED
### Response:
(Severity: 4), (Category: INFRA), (Description: The locations of installed XR files on disk are maintained by the install infrastructure using symbolic links. At least one of these links has been modified. This can be a malicious attempt to change the running software.), (Recommended Action: Ensure that only authorized people have access to the router. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_DEVICE_MISCONFIGURATION
### Response:
(Severity: 5), (Category: L2), (Description: There is a misconfiguration between a peer device and the local device.), (Recommended Action: Ensure that the configuration (on both local and peer device) is as expected. The message indicates the initial area to check.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV4_EA-3-ERROR3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_3_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC_CTRL-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message from DSC-CTRL process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-FAILED_ENS_INIT
### Response:
(Severity: 3), (Category: INSTALL), (Description: The install director was not able to initialise its event notification service. The system will not be able to perform any installs without this initialisation succeeding.), (Recommended Action: The system will not be able to perform any install operations. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-IPV6_CUSTOM_LEM_NIBBLE
### Response:
(Severity: 2), (Category: FABRIC), (Description: IPv6 custom lem config is not nibble granular, config is rejected.), (Recommended Action: None If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER_SNAP-4-DUMP
### Response:
(Severity: 4), (Category: OS), (Description: A non-invasive voluntary coredump requested by the process. Process might be experiancing a condition which needs investigation. This core file will help analysing the issue.), (Recommended Action: This should not occur in normal conditions, please provide the coredump to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_EVM_FILE_ATTACH
### Response:
(Severity: 7), (Category: HA), (Description: The event_file_attach function reported an error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-MEMORY
### Response:
(Severity: 3), (Category: SECURITY), (Description: tacacsd has failed to allocate the required amount of memory), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-PORT_INDEX_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-THREAD_ATTR_SET_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server unable to set the thread's attributes.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-CALL_IPC_NOTIFY
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An IPC notification was received that indicates an error. 1 or more sessions may not establish or may be torn down.), (Recommended Action: Allow the subscribers to reconnect. If the problem persists, you may need to restart vpdn_mgr and/or this client process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the insthelper process in IOS XR installation?
### Response:
The insthelper process assists the instdir process by performing file-related operations on behalf of instdir, such as copying files from the router to the TFTP server or vice versa.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_MEM_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an input memory error on link 0), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUB_UTIL-4-TRACE_INIT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is a non-fatal error in initializing tracing buffer and can happen when the router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: Check the memory state of the ltrace process and overall system. Reduce the activities on the system if required for tracing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-INTERNAL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: bfm encountered an error and is not able to recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-EVENT_CONN_OPEN
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to open event connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_SYSDB_DATALIST
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-5-LTRACE_INIT_FAIL
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Ltrace initialization failed within INV. Ltraces may not be printed.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-RELOAD_NODE_INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: The installation required a reload of this node, and this is now going ahead.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-EA_START_FAILED
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The tunl_gre_ma process failed to feature start tunl_gre_ea on one or more LCs via IM, tunnel creation has failed. Tunnel configuration should be retried again after all the LC are UP), (Recommended Action: Tunnel configuration should be reapplied when all the LC are UP)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_GENTRY_GET
### Response:
(Severity: 3), (Category: OS), (Description: The system failed to get gentry.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-6-BOOT_DEVICE_FORMAT_REQUESTED
### Response:
(Severity: 6), (Category: MEDIA), (Description: The media storage card specified was requested to format and will be formatted through the reload.), (Recommended Action: Media storage data should be recovered from either active card or current primary mirroring device. If not redundant card or no mirroring then reinstall software and configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR auto-tunnel backup nhop-only feature?
### Response:
The MPLS TE FRR auto-tunnel backup nhop-only feature restricts auto-tunnel backup tunnels to only the next-hop (NHOP) router on the path to the tunnel destination. It does not allow creation of backup tunnels to the next-next-hop (NNHOP) router. This reduces the number of auto-backup tunnels created and the associated overhead, but may provide less protection coverage.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MADISORN-4-SPP_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: An error has occured while interacting with PIRD/SPP.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-6-GSP_TRACE_HDR
### Response:
(Severity: 6), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-3-HW_DETECTED_ERROR_RX_PDMA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver detected a buffer marked with an error, possibly a CRC check. The buffer is discarded.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_SYSDB_EDM_REG
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered an error to register EDM to admin plane sysdb server. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD-3-USAGE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Startup option supplied to FWD is not valid.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed the there is no need to take any action. Otherwise Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-6-EVENT_TIMEOUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The L2VPN software was waiting for the specified event to occur, but never received it. The software has recovered and L2VPN forwarding should not be affected. This error will only occur on the active RP on startup or on the newly active RP after RP failover.), (Recommended Action: If L2VPN forwarding is not performing as expected, contact TAC with the log message.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-REMOVE_GROUP_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 was unable to remove membership to the group. Commonly, this is done for 224.0.0.1 by ipv4-ma with no associated socket when an interface is disabled, or for all groups (multicast promiscuous mode) whem multicast routing is disabled. It might be ok to ignore the failure.), (Recommended Action: shut/unshut of the interface will trigger leave/join respectively. Do as appropriate to recover. Collect the output of show tech-support, show ipv4 ma trace, show ipv4 trace, debug ipv4 ma mhost from the location the error message comes from. Note any previous errors related to multicast membership. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE0_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE0_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-UDI_AVAILABLE
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Unique device identification number is ' 'available on the device'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_MA_PWHE-3-REPLICATION_SUCCESSFUL
### Response:
(Severity: 3), (Category: L2), (Description: The interface mentioned in the message has been successfully replicated, and recovered from previous failed attempt.), (Recommended Action: No further user action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable RSVP on all interfaces?
### Response:
To enable RSVP on all interfaces, use the 'mpls traffic-eng interface all' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng interface all
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-CLIENT_MONITOR
### Response:
(Severity: 7), (Category: HA), (Description: The wdsysmon server returned an error to a client in response to a request to remonitor an event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to bind to sysdb. The error is displyed in the error message.'), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) Console logs b) show tech-support parser c) show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-SHUTDOWN_CHECK_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: A Frequency Synchronization process could not determine whether all Frequency Synchronization configuration has been removed and so cannot exit safetly. Frequency Synchronization processes may be running despite no Frequency Synchronization configuration existing.), (Recommended Action: No action is required. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-NSR_ACK_CHK_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: NSR ACK check failed. Please perform show mem heap for analysis.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_METRO-3-QINQ_TCAM_WRITE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: L2FIB Metro L3 QinQ entries programming in TCAM failed. The hardware and software entries will be out of sync.), (Recommended Action: Collect L2FIB debugs/traces and report to crs-l2vpn-dev team. -show tech l2vpn -show l2vpn platform trace all all location <> -show running-config -show l2vpn forwarding hardware ingress detail location<> -show l2vpn forwarding hardware egress detail location<>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-RESTRICTED_REGISTRATION
### Response:
(Severity: 7), (Category: SYSDB), (Description: SysDB registration support from LC to shared and admin planes has been deprecated (but is still supported). This system message indicates the application that is still using this deprecated service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_NAME_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred looking up an interface's name from it's handle. The error code should provide an indication of what the problem is. The most likely explanation is that the interface with the specified handle no longer exists although the message may be caused by low memory conditions or an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_CPU_DATA_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS to CPU packet data multiple bits error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-5-SVC_NOTICE
### Response:
(Severity: 5), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_SESSION_UP
### Response:
(Severity: 6), (Category: L2), (Description: The OAM session has been fully established, and regular heartbeat messages are being sent and received.), (Recommended Action: None. This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-PLL_PTP_STATE_FREERUN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the PTP PLL output is free-running.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD_MRIB-3-IFH_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: This message indicates an error is binding to the ifh server or obtaining the correct interface from the ifh server.), (Recommended Action: Execute 'show interfaces' to check all the interfaces are correctly defined. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mrib trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mrib trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-GEN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-CARD_POST_NOT_AVAILABLE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The card is reloaded due to a faulty HW/ASIC. The check on Online Diags indicates there is no diagnostic test available on the falling device, hence the card will then be reloaded with XR image.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_DETAILS
### Response:
(Severity: 3), (Category: SECURITY), (Description: Client address, error, error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-3-ADJ_DATA_CORRUPT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Either the active or standby Service State Controller for the location given in the message provided the Adjacency Manager with corrupt data. This most likely indicates a bug in the Service State Controller logic. No adjacencies will be installed for the named service, so no traffic will be forwarded to or from it.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_REX-3-INIT
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the RSPP REX library. This is used to divert packets, e.g. to a virtual firewall.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-5-NOT
### Response:
(Severity: 5), (Category: OS), (Description: A NOTICE level message was emitted by QNET.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-FORMAT_NVRAM_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory to format NVRAM.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_FULL_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 0 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-KEYSTORE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: CEPKI failed to write the keys in persistent storage.), (Recommended Action: 'Regenerate the key which failed to get stored in persistent storage')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-FABRIC_PING_SUCCESS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The DRP connection through ethernet failed, however the connection through fabric was succesful. recommended_action: *NONE*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_TCAM_RM-6-LOW_WATER_MARK
### Response:
(Severity: 6), (Category: L2), (Description: The TCAM device has sufficient number of free cells left.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_PROC_READY
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed on a call to system manager to indicate that it's ready to proceed. It's an internal fatal error. IS-IS process will abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-NO_PRIV_MSG_HANDLER
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-GCS_MAC_INSTALL_QUEUE_STALLED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MAC install queue stalled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_LIST_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-OVERTEMP_COND_CLEARED
### Response:
(Severity: 4), (Category: DRIVER), (Description: When the ambient temperature return back to valid operational range, then the CCC FPGA will power on the board to bring it back to operational state.), (Recommended Action: N/A.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-ENFORCE_GRACE_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is still enabled after grace period.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-OPERATION_COMPLETED_WITH_ERRORS
### Response:
(Severity: 3), (Category: INFRA), (Description: Specified install operation in the error message completed but with errors.), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-UNEXPECTED_SCRIPT_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The execution of the indicated script has been exited due to reception of the indicated signal.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-2-LOG_CRIT
### Response:
(Severity: 2), (Category: OS), (Description: A Critical message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-7-MISC_ERR
### Response:
(Severity: 7), (Category: OS), (Description: An unexpected error occurred. This can happen when the process is (re)starting. The process recovers by restarting itself.), (Recommended Action: Collect the output of show tech-support, show processes , show memory and show watchdog memory-state from the location the error message comes from. If the error message doesn't persist, it can be ignored. If the error message persists,call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace all loc <slot number>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-6-INFO_SUCCESS_COMMAND
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd successful login information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-6-SVC_INFO
### Response:
(Severity: 6), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_COMM_DRVR-7-ERR_LTRACE_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The SFE common infra driver could not open the ltrace buffer. The SFE common infra driver and the system should function as normal, with the exception that ltrace will not be available for sfe_drvr process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_CORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory correctable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_BURNER-5-version
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Invalid FPD version to RP console.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
iosxrwbd-1-RESTART_NOT_SUPPORTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message in the DPA module to indicate that a process that doesn't support restart has been restarted (crash, CLI or SMU installation) Process will trigger node reload to recover after collecting required information in the linecard's disk), (Recommended Action: Please collect the core file and DPA traces from linecard's disk Ignore this if process was operationally restarted like process restart command or process restart SMU installation those operations are not supported yet and nothing to debug at this point)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-MPLS_REPLAY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Serivce layer failed to replay MPLS objects to Label Switching Database.), (Recommended Action: The Forwarding Information Base may be inconsistent. Controller/agent may initiate a recovery action by unregistering MPLS and replay a new Forwarding Information Base. This error may occur on process restarts if MPLS objects cannot be played back to Label Switching Database.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some basic functions an operating system must provide to support networking?
### Response:
A network operating system must provide process scheduling, interrupt handling, memory management and protection, inter-process communication (IPC), synchronization services, and common shared libraries. It needs preemptive multitasking and multithreading with memory protection for processes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Initialization of a required module failed. The process was unable to continue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TYP_TX_RX_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a timeout on some bus), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-EVM_ASYNC_ATTACH_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A failure occured while trying to setup the event listen structure for package un-installs.), (Recommended Action: Check whether policy_repository process is running properly by command 'show process policy_repository' Check the install logs if all the packages are downloaded and install operations completed properly)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING_CLIENT-7-ERR_DLL_INIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicates that during dra_pairing dll attach, either debugging or ltrace services cannot be initialized.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8508-2-HW_STRAP_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIE device hardware strap error), (Recommended Action: Please reload the board using the following command: If the issue persists please, contact your technical support representative with the gathered information. 'reload location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-ADD_GROUP_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 was unable to add membership to the group. Commonly, this is done for 224.0.0.1 by ipv4-ma with no associated socket when an interface is enabled, or for all groups (multicast promiscuous mode) whem multicast routing is enabled. Failure might result in issues in multicast host functionality or multicast fwding functionality.), (Recommended Action: shut/unshut of the interface will trigger leave/join respectively. This can be done to retry the group join. Note any previous errors related to multicast)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-2-ASIC_ENUM_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar driver detected error during ASIC enumeration.), (Recommended Action: Driver will reload the card to recover from error. If the message occurs during every power cycle then please contact tech-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-BMP_SAMEHOSTPORT
### Response:
(Severity: 4), (Category: ROUTING), (Description: This message indicates that another BMP server has been already configured with same host and port combination.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-SCRATCH_REG_FAILURE
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostic test for LC scrach register has detected an error and if reload/shutdown thresholds are set corresponding action will be taken by the diagnostic software on failure.), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_PIDB-4-WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A run time warning occurred during the pidb operation on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-6-UPD_FILTER_MSG_BUFFERS_RESIZE
### Response:
(Severity: 6), (Category: ROUTING), (Description: Currently resizing of update filter message buffers is not supported.), (Recommended Action: Configure update filter message buffer size before the session comes up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-UNSUPPORTED_BOARD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This indicates that the indicated board type is not supported by the current IOS XR release and it will be powered down.), (Recommended Action: Check the data sheet of the board for minimum required IOS XR version.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INFRA_TEST-7-SOLICITED_A
### Response:
(Severity: 7), (Category: TEST), (Description: A solicited message with a string arg and an integer arg and an interface.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE5_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE5_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-OPTICS_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_SE-3-MALLOC_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates malloc failure while allocating block.), (Recommended Action: Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XCVR-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a failure message from the XCVR which indicates default xcvr notification other than the notifications like removed, ready, failed, presence_even_ack), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-STALE_SESSION
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-SEND_HELLO_PDU_TO_ISIS_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS was not able to send a hello class PDU to ISIS. This could be because of communication problems between CLNS and ISIS.), (Recommended Action: If this message is seen during transient conditions, for example when ISIS is restarting either because of install operation OR because ISIS crashed then it is not harmful. If the error message says out of memory, it is because of the queue between CLNS and ISIS being FULL which could either be because traffic rate is very high or ISIS might not be reading the packets. If it is seen under steady state conditions OR adjacency flaps are seen on this interface or re-occur then contact cisco-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-4-DUMPER_SNAP_DUMP
### Response:
(Severity: 4), (Category: OS), (Description: A non-invasive voluntary coredump requested by the process. Process might be experiancing a condition which needs investigation. This core file will help analysing the issue.), (Recommended Action: This should not occur in normal conditions, please provide the coredump to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-6-EXIT
### Response:
(Severity: 6), (Category: L2), (Description: ASIC scan server exits, expected behavior.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-CLI_MSG_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: The message received by the server had inconsistent values.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_LOSS_OF_SYNC_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on NPU-0 interface on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-MRIB_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: An problem communicating with the mrib.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mrib trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mrib trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-2-UNSUP
### Response:
(Severity: 2), (Category: L2), (Description: This PLIM is a prototype and is not longer supported), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-3-MUTEX_UNLOCK_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The mutex unlock for register operation returned error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-INV_DEBUG_FLTR
### Response:
(Severity: 3), (Category: L2), (Description: The PIRD debug library was notified about the creation of a debug item in SysDB which had an unexpected number of filter parameters. The corresponding debugging flag has not been enabled in PIRD, which may lead to some debug not being printed as expected.), (Recommended Action: If any problems are observed, then try removing the debug filter using the 'no debug pird' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_SOCKET-2-EVM_ERR_INIT
### Response:
(Severity: 2), (Category: L2), (Description: The initialization of socket with event manager failed due to some reason. The argument depicts the reason of the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is during the initialization, restart the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_CIDRID_SES_THRESHOLD_EXCEED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID and Remote ID has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_SYSDB
### Response:
(Severity: 4), (Category: L2), (Description: SSRP encountered an error using the SysDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SysDB server, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-4-CMRPL_UNLOCK_FAILED
### Response:
(Severity: 4), (Category: SYSDB), (Description: When commit replace command is executed, it creates a item in SysDB which can be thought of as a lock. Once commit replace finishes, the lock item should be deleted so that further such commit replace operations can continue. If for some reason this lock item cannot be deleted, it can cause any further commit replace operations to be rejected.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-CLIENT_UNMONITOR
### Response:
(Severity: 7), (Category: HA), (Description: The wdsysmon server returned an error to a client in response to a request to stop monitoring an event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-6-PM_ERR
### Response:
(Severity: 6), (Category: L2), (Description: This is an error condition which should not occur in normal conditions. %d - indicates the bay number), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-CONTEXT_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAP_LISTEN-3-BAG_RELATED_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: This error can occur only when the SAP had a problem in registering for SAP bags for multicast from SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sap trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sap trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes sap_listen error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes sap_listen error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show context<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show context<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. from the node obtained from the above command, run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sysdb trace edm <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sysdb trace edm <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-7-THREAD_CREATE
### Response:
(Severity: 7), (Category: IP), (Description: In a telnetd session. The vty thread creation failed .Internal error.), (Recommended Action: Internal error. Restart telnetd process to overcome.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-DRAM_BUFFER_DEL_INTR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Continuous dram crc errors seen. The dram might have gone bad. If the problem does not get resolved after auto-reload of the card, consider replacing the dram card.), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEV_HUB_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: USB Hub transaction is taking excess time.), (Recommended Action: The USB hub requires immediate service. Please attempt to restart the hd_drv process using command: 'process restart umass-enum'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge domain backup pseudowire?
### Response:
To configure a backup pseudowire for an L2VPN bridge domain, use the 'backup peer' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
neighbor 10.1.1.3
backup peer 10.1.1.4
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show logging' command in Cisco IOS XR?
### Response:
The 'show logging' command in Cisco IOS XR is used to display the contents of the logging buffer. It shows the logged messages, including the severity level, timestamp, and message text, which can be useful for troubleshooting and analysis.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_MGT_CV_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 MGT code violation on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-MMAP_SHM_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: mmap of the shared memory required to store servers tree nodes failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture 'show shmwin summary', 'show shmwin trace server', and 'show shmwin trace all'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-CLINFO_UNHOLD
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to decrement the hold count of the client info data of a synchronous message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TUPLE_MISSING
### Response:
(Severity: 3), (Category: OS), (Description: Tuple missing from table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-2-IM_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Error in IM(Interface Manager) operation first %s - Failure second %s - reason for the failure This happens on the LC with ATM interfaces), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Either caps addition or removal failed. Depending on the failure, reapply the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_BMADJ-6-INFO_STR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM BMADJ, Information), (Recommended Action: The message is just for debugging only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-6-INFO_RT_HDR_NOTUSED
### Response:
(Severity: 6), (Category: ROUTING), (Description: The RIB batching API believes that it already has this router header in the batching buffer.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CVAC-4-FILE_IGNORED
### Response:
(Severity: 4), (Category: MGBL), (Description: CVAC (Cisco Virtual Appliance Configuration) ignored a configuration file and did not apply it to the router. The specified reason explains why the file was ignored.), (Recommended Action: Determine whether the configuration file should have been applied to the router. (In some cases a file may be ignored due to intentional redundancy between files.) If the file should not have been ignored, make whatever changes are needed to address the reason for ignoring the file, and issue the 'reload' command to cause CVAC to run again after the router reloads.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-3-INDEX_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error indicates the mismatch between the egress and ingress interface.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-EA_DEBUG_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Debug initialization failed in packet programming path. Packet path initialization is aborted and may be retried.), (Recommended Action: Restart the protocol process. 'process restart <protocol> location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-UNHANDLED_DEBUG_OPTION
### Response:
(Severity: 3), (Category: HA), (Description: The debug option chosen is not handled.), (Recommended Action: Make sure that the debug option chosen is the right one.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP session capabilities?
### Response:
To configure LDP session capabilities, use the 'capabilities' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#capabilities sent
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-3-INVALID_PARM_DEVICE_INSERT
### Response:
(Severity: 3), (Category: MEDIA), (Description: An invalid parameter value was passed to media driver when a media device is inserted), (Recommended Action: Report this message to TAC. Capture console log, 'show media' and 'show media trace' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-6-SET_WAVELENGTH
### Response:
(Severity: 6), (Category: L2), (Description: DWDM Controller has provisioned optics to [HW Default | Configured | GMPLS Signaled] wavelength.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Attached bit in IS-IS?
### Response:
The Attached bit is set by Level 1/Level 2 routers in their Level 1 LSPs. It indicates that the router is attached to the Level 2 backbone. This information is used by Level 1 routers to determine the closest Level 1/Level 2 router for reaching destinations outside the area.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-INPUT_PROGRAMMING_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The Frequency Synchronization manager that generated the message failed to program the inputs for the specified selection point into the platform. Any changes to the inputs (for example, if an input is no longer available or if it's QL has changed) will not take effect.), (Recommended Action: If the error message indicates an out-of-resource condition, then resolve the underlying resource issue, and restart the Frequency Synchronization manager on the affected node using the following command: process restart fsyncmgr location <node> Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-SETTING_NONFREE_MAC_OFFSET_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: MAC offset currently being set is already in use), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVENTORY_PARSER-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in Inventory parser, but there is not corresponding error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-3-BADPAK
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Consistency check detected corruption in the specified area of the specified packet. This will cause packet manager to restart. Please report the message and value to your technical support representative.), (Recommended Action: Please collect a core dump of the process from which the message is output, using the 'dumpcore running' command to catch the current packet memory state ('exception pakmem on' must also be configured). Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-ERROR_RINFO
### Response:
(Severity: 7), (Category: SYSDB), (Description: A request error due to gsp error during SYSDB MC waited the expected number of replies. Then SYSDB MC would take recovery process), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU-3-PLAT_LOCAL_COMM_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The reporting process has been unable to obtain information on the local node from the Platform Local service. This suggests that there is an issue with that service, or the connection to it.), (Recommended Action: The process will restart itself in an attempt to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_SSC_UPDATE_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: The Firewall Controller's attempt to inform the Service Director of a change to either interface/firewall state has failed. This will have left the system in an inconsistent state.), (Recommended Action: Restart the Firewall Controller process using the 'process restart' mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-PSS_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Persistent Storage Service handling error.), (Recommended Action: Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-FPGA_PCI_PERSISTENT_FAIL
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was unable to recover from the PCI link failure due to a PCI FATAL erorr. CCC driver has to be restarted to recover. If 5 restarts of the driver cannot recover the card will reload. If card reload cannot fix the problem it is a HW fault where something went wrong with the PCI bridge), (Recommended Action: RMA)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-BATCHING
### Response:
(Severity: 4), (Category: OS), (Description: Hardware pre-ifib returned an error during a batching operation.), (Recommended Action: Restarting pifibm_server_lc and pifibm_server_rp may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SM-3-UNABLE_TO_PROCEED
### Response:
(Severity: 3), (Category: INSTALL), (Description: This self-managing component encountered an expected error when attempting to carry out an action required for the currently requested operation, so has had to halt processing of the operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GNSS-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-2-MODULE_FAIL_REASON
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Some power module failure condition has been raised.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-4-FM_MSG_TIMEOUT
### Response:
(Severity: 4), (Category: OS), (Description: The PA failed to receive a response to an IFIB table update or an IFIB slice assignment update message.), (Recommended Action: Restarting lpts_pa and lpts_fm on the node were the issue is seen may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-SELECT_IGNORED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal notification error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_4P_OC192-3-ERR
### Response:
(Severity: 3), (Category: L2), (Description: fail to init debug service event manager fails to provide its service), (Recommended Action: sysmgr will respawn plim_4p_oc192 'show logging' to look for the errors from event manager)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-MIB_TRAP_NFN_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: PTP was unable to perform a MIB notification for one of its configured traps. A MIB client listening may have missed a notification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'backup disable' command in IOS XR MPLS TE configuration?
### Response:
The 'backup disable' command is used under an MPLS TE tunnel interface to disable the use of that tunnel as a backup tunnel. By default, all TE tunnels are eligible to be used as backup tunnels for FRR protection. This command allows you to exclude specific tunnels from being used as backup, which can be useful for controlling the backup path selection.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support external AAA for user authentication?
### Response:
Cisco IOS XR supports external Authentication, Authorization and Accounting (AAA) using TACACS+ and RADIUS protocols. The router can be configured to authenticate users against an external AAA server. This allows centralized management of user credentials.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured when trying to delete a path from a route.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_10_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-DEPRECATED_RTRID
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPFv3 router-id <interface> has been deprecated.), (Recommended Action: Use router-id <ipaddress>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-EPE_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the BGP EPE process. If this occurred during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-4-ROOT_DEVICE_BUS_WARNING_THRESHOLD_EXCEEDED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A root device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_HW_LIMIT_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error), (Recommended Action: Change the config to adhere with the supported limit.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-MAP_EP_SHMEM_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to map the MPA's shared memory. The error message describes the Software warning.), (Recommended Action: Please try to recover by doing the process restart of the process that generated the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISSU_GROUP_COUNT
### Response:
(Severity: 3), (Category: INSTALL), (Description: Issu process failed while getting group members count of a group message. ISSU operation will continue without any error. This will be attempted again after some time.), (Recommended Action: ISSU manager will retry after sometime to fetch the value. If the issue persists even after tries, contact tac with 'show tech-support issu'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-1-SVC_ALERT
### Response:
(Severity: 1), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-NETIO_IDB_UNAVAILABLE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: While processing an ingress packet, the eint driver failed to find netio idb), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does SysDB collaborate with Configuration Manager in IOS XR?
### Response:
SysDB collaborates with Configuration Manager in IOS XR by storing the configuration data and notifying relevant processes when configuration changes occur. Processes can register with SysDB to be notified of specific configuration changes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-SBE_THRESHOLD_EXCEED
### Response:
(Severity: 3), (Category: L2), (Description: Egressq SBE rate has exceeded the configured high threshold value. This is a self healing error condition.), (Recommended Action: No action is required. It is a self healing error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-4-ERR_CHKPT_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq Checkpoint Init error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_HEARTBEAT_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected a problem in the internal state machine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-ERR_SYSDB_CONNECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to bind to system database while opening a connection to it.), (Recommended Action: Restart of EIGRP might solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_EDM-3-SYSDB_EDM_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed when attempting to register its external data manager with SysDB.), (Recommended Action: restart policy_repository and check for re-occurence of issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-3-EVENT_UPDATE_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: An error was detected when initializing the event queue between two infrastructure module.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET1_INTR_CRC16_CHK_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET1_INTR_CRC16_CHK_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-CLOCK_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Clock Failure to SFE ASIC's- Core pll clk or serdes pll clk failure), (Recommended Action: Recovery action is taken. FC reload if all FE asic's clk failure. Else PON on specific FE asic. CLK failure can be because of core pll or serdes pll and issue is identifeid by reading the CLK PLL register. If the CLK is not recovered after with several reloads, then the FC card will be shutdown.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-INVALID_DEVICE
### Response:
(Severity: 4), (Category: DIAG), (Description: A diagnostic request is being made on a device that does not exist.), (Recommended Action: Ensure that the specified device number (1-based) exists and is valid.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MCAST_CHKPT-3-ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-4-ETH_BUILDUP
### Response:
(Severity: 4), (Category: OS), (Description: GSP Ethernet queue buildup indicates underlying transportor hardware issue), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-FAIL_MEM_ALLOC
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failure in Inventory Manager memory allocation. No sufficient memory), (Recommended Action: No action needed. Inventory Manager process will exit automatically)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-LWA_ADD_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to enable this user to log into ksh.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-DELETE
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the object does not exist. The details are in the error string.), (Recommended Action: Check that the object to delete exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSP_B_PKT_LTH_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TSP decoder B length error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_CA_CERTIFICATE_EXPIRED
### Response:
(Severity: 4), (Category: SECURITY), (Description: SAM found the expired CA certificate in table had been accepted by user.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-WB_SERIAL_NUM_TRUNCATE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-6-GROUP_SEQ_INFO
### Response:
(Severity: 6), (Category: OS), (Description: Just more information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-MSG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while handling messages received by acctd.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_BULK_NUM_OPS
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_AGT-3-INVALID_PARAM
### Response:
(Severity: 3), (Category: INFRA), (Description: ISSU Agent received an invalid operation ID from Install Manager, suggesting an inconsitency. ISSU Agent will veto send a veto message to Install Manager in order to abort the operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-CPU_THERMAL_SHUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-SRSP_ACTIVE_EOBC_MCAST_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Standby RSP failed to transmit heartbeat to all nodes via active EOBC links.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMHAD-4-ERR_NOMEM_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: The Platform Manager HA Driver DLL was unable to add one new fault record due to lack of memory, but it is still running.), (Recommended Action: Add more memory to the card specified in the System Message. If the this message recurs after a memory upgrade, copy the System Message text exactly as it appears on the console or in the system log, and contact your Cisco technical support representative, and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIRROR-3-ERR_BAG_REGISTER
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Failed to register edm bags'), (Recommended Action: Collect the following details: 1. Command issued 2. show mirror trace. 3. console logs. 4. If config is restored from file, then filename/contents. 5.If command failed at startup, show config trace and show config failed startup.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-SYSDB_REG_NOTIFY_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 Management Agent encountered failure in registering notifiee with SysDB. It will recover itself by restarting. Typically this error is caused if sysdb is unavailable for an extended period.), (Recommended Action: If the problem persists get the output of show processes, show sysdb trace, show sysdb trace clientlib job <jid of ipv4_ma>, show ipv4 ma trace location <>, debug sysdb notification job <jid of ipv4_ma> from the location the error message comes from.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REP_COM_REMOVE_PENDING
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install remove inactive all will be triggered post commit if install commit is successful), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-SHUTDOWN_ON_MULTIPLE_UNGRACEFUL_RELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node has already undergone mutilple ungraceful reboots in last one hour or one day and has reached node's hourly or daily reboot threshold limit of 5 (in last one hour) or 8 (in last one day). In order to avoid further disruptions to the netwrok due to this node, its better to shut (power) down this node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-POLICY_RESET
### Response:
(Severity: 5), (Category: ROUTING), (Description: Automatic soft reset on policy change is not possible as the neighbor does not support ROUTE_REFRESH and 'soft-reconfiguration inbound' is not configured.), (Recommended Action: Manually clear affected peer at earliest convenience, in order for policy change to take effect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Hit general error. The error is displayed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TEMPERATURE_ALARM-3-DIE_OVERTEMP_T4_MAJOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hotspot temperature sensor is risen above or fallen below T4 threshold(pfm major temp. threshold).), (Recommended Action: *SH_CMD show env*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-FAILED_EOI
### Response:
(Severity: 3), (Category: OS), (Description: Process failed to send EOI and exited.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700_DLL-3-TRACE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CPU Control, Dynamic Link Library (DLL) failed to initialize the LTrace facility. The effect is that the CPU Control debug trace facility is not functional. This means that trace information used by Cisco support to help isolate CPU Control device issues may not be available. This does not impact normal CPU Control device operations. Note that it is unlikely that this failure would occur by itself. This failure is generally indicative of a larger LC-wide problem. %s - description of the specific failure encountered %s - error detail, if appropriate), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_EDM_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process could not register with SysDB for management of the data used by IS-IS statistics and management agents. As a result, isis show and clear commands will not function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_18
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-STORM_CONTROL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Storm control can only applied on main port. Multiple configurations on sub-interfaces under the same main port are not supported.), (Recommended Action: User needs to remove storm control on all main ports indicated in ios-msg before re-applying the desired storm control configuration to a single interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_FC_DIP2_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control DIP2 parity error on NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-4-UNKNOWN_MSG
### Response:
(Severity: 4), (Category: L2), (Description: An unknown InARP message was received - it will be ignored. This is just an information mentioning the InARP message arrived is not of request or response type.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-3-SYSMGR_CALL
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified SONET Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SRVR_ENGINE-3-ERR_2SL_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: SKS server exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-PKT_DROPPED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet dropped while injecting from the CPU of the affected card.), (Recommended Action: The issue might not be very significant if observed only once. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show spp pdma trace all location <LC/RP><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show spp pdma trace all location <LC/RP><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-2-LIB_LC_RESET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Platform Fault Manager DLL received an error from one of the LC devices. The LC MUST be reset.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISM_PD_LIB_SPA_SHUTDOWN
### Response:
(Severity: 6), (Category: INSTALL), (Description: The shutdown operation is being performed on the indicated SPA when fabric plane upgrade fail.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-3-ASSERT_MSG
### Response:
(Severity: 3), (Category: HA), (Description: Checkpoint related internal data structures gone wrong. Checkpoint cannot continue further hence, process will crash and restart immediately after this message.), (Recommended Action: Please collect console logs during the crash, corefile and contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-3-ERR_ROUTE_HDR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv4_rib_batch_add_route.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-DS_CONNECT_RETRY
### Response:
(Severity: 6), (Category: MGMT), (Description: This comes when program fails to connect to directory service due to some infra issue, the program will re-connect the same), (Recommended Action: The program tries to re-connect the directory service, once directory service is up, this message will not come up, If directory service is up and still this message comes, the work-around would be restart program)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-PUNT_TX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller FPGA reported that data it received from crossbar fabric arbiter had parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSI_EA_PD-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an informational message in the CSI EA Platform to indicate that an error was seen during init operation. A return code is returned which can do a retry or exit based on if error persists.), (Recommended Action: Please collect the console log,)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install label command in IOS XR?
### Response:
The 'install label' command is used to assign a label to a set of packages. This label can then be used in other install commands to refer to that specific set of packages, making it easier to manage and identify them.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_QAD_NOTIF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get the qad notification of queue depth above or below watermark. This normally indicates there is some issues with the qad queue %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_PROXY-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fabric proxy failed to create an event manager during the initialization. The driver will be non-operational due to this error.), (Recommended Action: The Proxy will recover by restarting. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TP_SW-6-OPENROAM_ADAPTOR_INSTALL_SUCCESS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that Openroadm adaptor is successfully installed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER_SNAP-6-DUMP_OK
### Response:
(Severity: 6), (Category: OS), (Description: A non-invasive voluntary coredump requested by the process completed successfully. Process might be experiancing a condition which needs investigation. This core file will help analysing the issue.), (Recommended Action: This should not occur in normal conditions, please provide the coredump to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_WL_OUT_OF_RANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-2-HFR_FIB_OOR_ROUTES_UNBLOCKED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: CEF on the node had earlier detected that the number of routes had exceeded prescribed limits and route updates to the hardware had been blocked. It has now been unblocked.), (Recommended Action: Make sure this situation does not repeat)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth adjustment threshold feature?
### Response:
The MPLS TE auto-bandwidth adjustment threshold feature specifies the percentage difference between the current tunnel bandwidth and the measured output rate that triggers an auto-bandwidth adjustment. A lower threshold means auto-bandwidth adjusts the tunnel bandwidth more frequently, while a higher threshold means adjustments occur only for more significant rate changes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-GEN_INFO_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An internal software error occurred in L2FIB manager process. This could be due to an internal processing error or an illegal state has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-FORMATERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: Probably the NVRAM device has gone bad.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUMP-3-ERR_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSMGR_TROUBLE
### Response:
(Severity: 7), (Category: INSTALL), (Description: SysMgr appears to have become unresponsive, potentially requiring operator intervention.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-3-ERR_EVM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DSC Media DLL has encounered the annunciated Event Manager error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_NPMB-6-PROCESS_INGRESS_BUFFHDR_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Ingress buffer header of packet failed to extract.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-INTERNAL_DATA_INCONSISTENCY
### Response:
(Severity: 7), (Category: INSTALL), (Description: The Install infrastructure has encountered an unexpected state, and will not be able to continue operating successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-GEN_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some requested operation failed. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FDI-3-ERR_RCV_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: TLV headder/Message is corrupted. SW will ignore rest of the messages.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-2-USAGE
### Response:
(Severity: 2), (Category: OS), (Description: Incorrect command line parameters were passed to the nrs server, and so it failed to start.), (Recommended Action: Check the startup arguments passed to nrs server. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-3-IDPROM_READ_FAILURE
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The PSU IDPROM can not be read.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-NAMESPACE_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen server failed to build config namespaces from internal namespace module. This may result in failure to output the configuration in the intended order in show run command. Or in internal config backup.), (Recommended Action: Collect the show version, show logging, show nvgen trace output, show runnning output, show config history and show tech-support sysdb. Contact TAC representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-DLL_INIT_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while initializing AAA client library DLL.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-SYSDB_ITEM_ERROR
### Response:
(Severity: 3), (Category: HA), (Description: SysDB returned an error to LRd.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: HA), (Description: Registration of debug services failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XML_TTY-7-INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: An internal error has occurred in the XML TTY Agent. Some XML requests (over TTY) may not be able to complete correctly.), (Recommended Action: Retry the XML request that had the error. Transient conditions should have passed, and in all likelihood, this request will go through. If not, close this TTY session, and restart a new TTY session. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-LSPTOOBIG
### Response:
(Severity: 4), (Category: ROUTING), (Description: L-LEVEL LSP LSP-ID size LSP-LENGTH bigger than interface INTERFACE-NAME MTU INTERFACE-MTR, LSP dropped. This system was unable to flood an LSP out INTERFACE-NAME because the interface MTU was too small. The LSP has not been transmitted on the interface.), (Recommended Action: Configure the routing area and the interfaces with a consistent MTU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-UNABLE_TO_ACCESS_EUSB
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Check if eUSB device is there. If it unable to access the eUSB device then this notice message will be printed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_MASTER-6-GENERAL_INFO
### Response:
(Severity: 6), (Category: OS), (Description: Normal operation. Informational only.), (Recommended Action: No action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-NOT_IN_LOOPBACK
### Response:
(Severity: 4), (Category: L2), (Description: A requset has been made by the remote peer to stop Slave loopback mode. However, we are not currently in Slave loopback mode. This indicates that the remote peer is out of sync with our current state.), (Recommended Action: Start slave Loopback mode before attempting to stop it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the instcmd process in IOS XR installation?
### Response:
The instcmd process is the Install Manager CLI process. It provides the user interface for performing installation-related tasks and communicates the user requests to the instdir process.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_THREAD
### Response:
(Severity: 4), (Category: IP), (Description: ARP has failed to create a thread for the specified process. In this situation ARP restarts and this should resolve the problem.), (Recommended Action: Restarting the process may fix the issue. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-4-MSG_RESEND_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: Failed in re-sending a message after onboard logging server process resart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-6-OPERATION_NOT_SUPPORTED
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-LPTS_ADD_BINDING
### Response:
(Severity: 3), (Category: ROUTING), (Description: The clns process was unable to add a binding to LPTS. This is an internal error.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE fast reroute (FRR) feature?
### Response:
The MPLS TE fast reroute (FRR) feature provides link and node protection for MPLS TE tunnels. It enables fast traffic recovery upon link or node failure by using pre-signaled backup tunnels that bypass the protected resource. FRR is enabled on a per-tunnel basis and activated when the primary tunnel fails.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP bandwidth on an interface?
### Response:
To configure RSVP bandwidth on an interface, use the 'mpls traffic-eng bandwidth' command in interface configuration mode. RP/0/RSP0/CPU0:router(config-if)#mpls traffic-eng bandwidth 100000
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-HIGH_VOLTAGE_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an QSFP+ voltage greater than or equal to the high voltage alarm threshold. The QSFP+ is the pluggable optics on the line cards. The voltage threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-CARD_POWERUP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Shelf Manager component has requested powerup on a line card or secondary RSP.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-6-RECV
### Response:
(Severity: 6), (Category: OS), (Description: Failed recv() for a domain socket.), (Recommended Action: This message is informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_IPSEC_TO_NBR_CREATED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic Network Control plane - IPSEC tunnel ' 'established to neighbor'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the nsf ietf command in IS-IS?
### Response:
The nsf ietf command is used to enable IETF-standard Non-Stop Forwarding (NSF) for IS-IS. Like Cisco NSF, IETF NSF allows the router to continue forwarding traffic during a supervisor switchover or a software upgrade. However, it uses a different mechanism for synchronizing the database with neighboring routers after the switchover or upgrade.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-ERR_HW_THRESHOLD
### Response:
(Severity: 4), (Category: L2), (Description: A hardware error is detected on the PLIM, and the error threshold has been crossed. Software will take action as described in the error message, if not none, to try to contain or recover from the error. The hardware error and the software recovery action will not impact traffic. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Threshold of %s - the defined threshold for this error. Software action: %s - the action that software will take to try to contain or recover from the error. Recommended user action: %s - recommended action to the user. Possible values: 'none' 'replace XFP' 'PLEASE MANUAULLY RELOAD THE LC AT NEXT MAINTENANCE WINDOW'), (Recommended Action: Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-PAK
### Response:
(Severity: 3), (Category: ROUTING), (Description: An operation failed during packet handling.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-PUF_MAGIC_LOOKUP_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This indicate a format error in timezone configuration file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-MSG_RECV_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Failed to receive message from AIB while waiting ' 'for async messages.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-START_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: The named virtual service failed to start.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-MALLOC_FAILED
### Response:
(Severity: 7), (Category: HA), (Description: A call to allocate memory failed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-BIOS_BOOT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BIOS has failed to boot from the indicated card. The failure could be related to secure boot failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-7-INIT_FAILED
### Response:
(Severity: 7), (Category: IP), (Description: The IPv6 MA process failed to init software. This can happen when the process is (re)starting and any basic infrastructure service required by the process is not available.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-RSI_TABLE_ID_FAIL
### Response:
(Severity: 6), (Category: ROUTING), (Description: Failed to get rsi table id for the reason specified.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_4P_OC192-3-GET_NODEID_ERR
### Response:
(Severity: 3), (Category: L2), (Description: PLIM driver failed to obtain either its node ID or extract rack/slot/instance information (having obtained the node ID).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_SAVE_TRACES_DONE
### Response:
(Severity: 6), (Category: INSTALL), (Description: Saved traces to standby node before switching over the node), (Recommended Action: This message is just to report that debug data is saved.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_SPECIAL_HANDLE_THRESH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: ASIC errors have occured and been handled. Such errors have crossed threshold.), (Recommended Action: ASIC errors that need special handling have occured and exceed the threshold. The error condition has been handled *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-2-CRT
### Response:
(Severity: 2), (Category: OS), (Description: A CRITICAL level message was emitted by QNET.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_10
### Response:
(Severity: 3), (Category: IP), (Description: The LMA is interworking with a PGW for Mobile Local Loop mobility service and is expecting the PGW Subscriber Continuity VSE to be present in the PBU messages that it received via the PGW.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_9_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALARM_MGR-3-MEM_ALLOCATE_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error due to memory allocation failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the common thread states in the IOS XR microkernel?
### Response:
The common thread states are\n- Running: Thread is currently executing on CPU\n- Ready: Thread is ready to execute, waiting to be scheduled\n- Blocked: Thread is waiting for an event (message, I/O, timer)\n- Receive blocked: Waiting for a message\n- Reply blocked: Waiting to reply to a message\n- Interrupt blocked: Waiting for an interrupt\n- Mutex blocked: Waiting for a mutex\n- Stopped: Thread is suspended and will not be scheduled\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_MAX_AREA_ADDR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Bad max area addresses (MAX-AREA-ADDRESSES, should be 0 or EXPECTED-MAX) from SNPA (INTERFACE-NAME). This system received a pdu reporting an invalid number of configurable area addresses. This system only accepts values of 0 and 3 (both indicate 3). The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_EVM_SEND_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to send the specified message. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-IOFPGA_INTERRUPT
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has detected that IOFPGA board has reported an interrupt. This interrupt may be fatal and may cause system to reset. If system goes power down then user needs to power cycle the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-MEM_POLL
### Response:
(Severity: 4), (Category: HA), (Description: An error was encountered during wdsysmon's poll for system memory usage.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G709-6-PRBS_INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message to know stage of PRBS test whether it has been started/stopped with specified mode and pattern.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-2-SVC_CRIT
### Response:
(Severity: 2), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-COLD_RESTART
### Response:
(Severity: 7), (Category: HA), (Description: A process failed to restore state from a table in the checkpoint store.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-5-DUAL_ROUTER
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This is an info message indicating that the router is booting as a dual router.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-1-CERT_EXPIRED_ALERT
### Response:
(Severity: 1), (Category: SECURITY), (Description: Cerficate has expired. Immediate action is required.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
scripts-3-NODEID_EXTRACT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An error occured as rack/slot/instance couldn't be extracted and the process will exit. This may be program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-RECORD_LENGTH_UNMATCH
### Response:
(Severity: 3), (Category: OS), (Description: The message received by an application had inconsistent record length.), (Recommended Action: This happens when a client sends corrupted data to obflmgr. Please copy the file to a different location, clean the corresponding feature file and restart obflmgr. CLI to clean the file: admin clear logging onboard <feature file> if the issue is seen even after this step, then collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. admin show logging onboard raw location <LOC> 6. Collect running core dump of the process: CLI: dumpcore running obflmgr)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP bias greater than or equal to the high bias warning threshold. The CFP is the pluggable optics on the line cards. The bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An initialization error has occured for IPv4 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-DESTROY_EVENT_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to destroy sync event manager.), (Recommended Action: Check corehelper process, collect console logs, show context. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN hub and spoke feature?
### Response:
The MPLS VPN hub and spoke feature allows a VPN to be configured in a hub-and-spoke topology, with the hub PE router importing and exporting routes to and from spoke VPN sites. It simplifies VPN connectivity and provides a way to share services from a central site. Hub and spoke VPNs are implemented using route target import/export between hub and spoke PE routers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IPCP_OPTS_INCONSISTENT
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA has negotiated inconsistent IPCP options. The message details which options are inconsistent. IPCP will be brought up, but the inconsistencies could cause problems. The most likely reason for this is a misconfiguration, either locally or on the peer.), (Recommended Action: Consider changing the relevant configuration either locally or on the peer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Ingressq encountered a fatal memory allocation error. If a new configuration being applied, the configuration will be rejected. The user may reapply the configuration. If the error happens during normal operation, the process will restart to recover from this error.), (Recommended Action: The driver/client processes try to recover from this error. If any discrepancies are found in the device functionality, contact TAC Support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-TAIKO_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The taiko power alarm was encountered), (Recommended Action: Node will be shutdown immediately as hardware error occured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET0_INTR_MISSING_EOP_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET0_INTR_MISSING_EOP interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LOCATE_SYMLINKS_FILE
### Response:
(Severity: 3), (Category: OS), (Description: An expected startup configuration file for QSM could not be found. This could be due to an install problem or due to data being deleted from the installation file system. QSM will continue startup-up, but some system functionality may be impared.), (Recommended Action: Your installed file system is missing a file. Perform a re-install to refresh the missing file. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TABLE_DELETE
### Response:
(Severity: 3), (Category: OS), (Description: Unable to delete object from table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-MFI_CLIENT_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-4-LTRACE_INIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB (D)RP component.), (Recommended Action: Platform software will correct itself if this happens. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_DEBUG_INIT
### Response:
(Severity: 3), (Category: IP), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_2_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-COMM_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred on a request to bind to the RIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-6-NVRAM_READ_FSTYPE
### Response:
(Severity: 6), (Category: MEDIA), (Description: The ROMMON variable for format option is unknown, so that format operation will not happen.), (Recommended Action: Please do not set ROMMON variable by hand.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-4-NEG_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: The SERG role negotiation between peer routers has encountered error in specified role. This is a warning and would break the session sync if it is not resolved i.e if both peer routers are either in master or slave mode. Normally if this is transient condition it will resolve by itself.), (Recommended Action: Check to ensure that the two peering routers have different SERG roles for the specified group. If not, verify that the initial preferred role is not configured to be the same on both ends. Fix configuration inconsistency and then disable/enable the group to rectify the condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-MEM_ALLOC_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: A memory allocation operation failed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-NBR_DOMAIN_CERT_INVALID
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'The domain certificate of the neighbor device ' 'is invalid'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_VPN_MIB-3-ERR_DLL_SYMBOL_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Cannot find DLL symbol error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-SYSDB_REG_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace sysdb error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace sysdb error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sysdb trace client-errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sysdb trace client-errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-ERR_2_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: IKE general error message with two prameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-ERR_IO
### Response:
(Severity: 3), (Category: L2), (Description: ASIC scan server has failed the specified io operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-SJTAG_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: FPGA is monitoring the JTAG clk line. If it found clk line has any activity then it will generate the fault SJTAG fault indicates that someone tried to tamper with t the board which is a security concern. FPGA will hold CPU to reset on this fault), (Recommended Action: This is an indication of security breach and will require RMA of the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_LOCSW-7-DEBUG_WARNING
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_AHS_LOS_LANE2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-6-TRACK_INFO
### Response:
(Severity: 6), (Category: SERVICES), (Description: Internal information. for example: track state changes.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-ENCAP
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred processing a request to set mfr encapsulation on an interface.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-HBLOSS_COLLECT_LOGS
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Shelfmgr detected partial heartbeat loss for this node. Debug logs are collected on the bootflash locally to help identify the the root cause of the heartbeat loss.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a VRF in IOS XR?
### Response:
To configure a Virtual Routing and Forwarding instance, use the 'vrf' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#vrf Customer_A
RP/0/RSP0/CPU0:router(config-vrf)#address-family ipv4 unicast
RP/0/RSP0/CPU0:router(config-vrf-af)#exit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_LOCSW-7-PFI_WARNING
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the PFI-IFH module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-CONTEXT_REGISTRATION
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_SYSDB_API
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to perform a sysdb api call. The module which is calling this api, the description of the api and the error is displyed in the error message.'), (Recommended Action: collect show nvgen trace, show logging, any abnormal console message, and configuration of the router. Then send this output to tech support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-LC_ACT2_IDENT_FAILED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Hardware in the specified location could not be verified as a genuine Cisco product.), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather the output of CLIs 'show diag <lc> eeprom-info', 'show tech-support ethernet interfaces'. Please ensure that the line card daughter board card type, board PID and serial number are not modified. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-NO_DIAG_RUNNING
### Response:
(Severity: 6), (Category: DIAG), (Description: An attempt to stop a diagnostic test that was not running was made.), (Recommended Action: None. This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_BRIDGE_BIND
### Response:
(Severity: 4), (Category: L2), (Description: Failed multiple attempts to bind to QFP SPA bridge controller server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-3-IDPROM_ACCESS_FAILED
### Response:
(Severity: 3), (Category: LIBRARY), (Description: Software cannot read the power module's IDRPOM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_CONN_OPEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP-4-WARN_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The FHRP library failed to initialize correctly. In this situation HSRP/VRRP restarts, but may not recover if there is a persistant error in the IOSXR system and HSRP/VRRP is still unable to reestablish its connections and initialize successfully.), (Recommended Action: If HSRP/VRRP does not restart and automatically recover, do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PROVISION_STARTED
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when a provision disk request for either DETACH/ATTACH is triggered), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TEMPERATURE_ALARM-2-DIE_OVERTEMP_CRITICAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC on die temperature sensor is risen above or fallen below critical threshold.LC or Port will be shutdown in 24 Hrs), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, LC or port will shutdown. Call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAM_MANAGER-3-PAM_WATCH_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Automated faulty event (crash/memory leak/show logging pattern) monitoring.), (Recommended Action: Check pam_manager process, show context, collect console message. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-TAP_READ_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: TAP read consumed too much time.), (Recommended Action: collect the logs mentioned above)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-MEM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_POLL_WRONG_FD
### Response:
(Severity: 3), (Category: MGBL), (Description: There appears to be some corruption related to poll.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-6-SUBIF_STATE_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: Informs about the state changes of the subinterface. first %s --> The method name next two %s --> TRUE/FALSE next two %x --> interface handles for the sub and main interfaces respectively.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-GEN_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: A general warning.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-SUBAGENT_REG_COMPLETE
### Response:
(Severity: 3), (Category: SNMP), (Description: This syslog will indicate that all subagents have completed their registration with snmpd. This syslog is introduced to indicate timeout seen with syslog OID_SUBTREE_MISSING is now recovered. In scaled router, sometimes mib take more time to complete its initialization, this syslog will help to indicate that timeout has recovered itself.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-DLL_INIT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: Tunnel IP Lookup DLL failed to initialize a critical component and might not function properly.), (Recommended Action: Please provide the output of the following command: <CmdBold>show tech-support tunnel-ip<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-4-CFG_SAVE_SINGLE_INTF
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Configuration could not be saved for this interface prior to the interface being deleted.), (Recommended Action: When this interface is re-created, re-enter desired configuration manually.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC_CMN-5-rest_global_queue_limit
### Response:
(Severity: 5), (Category: OS), (Description: Too many REST sessions opened or REST API is generating events faster than REST client can consume.), (Recommended Action: All REST connections were already disconnected. Decrease number of generated notifications by decreasing number of elements related to subscribed notifications (number of nodes, links or prefixes in topology if client is subscribed for topology notifications or number of LSPs if clients is subscribed for LSP notifications) or solve network issue causing increased number of events. If number of notifications is expected, then expected performance limits with supplier of REST client.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-NULL_EVM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Protocol packet path initialization failed due to no packet event notification registered from protocol module. Initialization is aborted and may be retried.), (Recommended Action: Restart the protocol process. 'process restart <protocol> location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-5-ERR_MEM
### Response:
(Severity: 5), (Category: MGBL), (Description: The system is running out of memory and was not able to allocate sufficient memory to carry out a collection operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-VPWS_MPLS_SRV6_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: An EVI/EAD route was received for an MPLS VPWS that is missing a label, or for an SRv6 VPWS that is missing a SID. Most likely scenario is that the remote side is configured for a different encap than the local side.), (Recommended Action: Perform network level review, and ensure that services are configured as MPLS or SRv6 as appropriate.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-3-REGISTER_NTFN
### Response:
(Severity: 3), (Category: MEDIA), (Description: Syncfs failed to register with qsm/lrd for notification), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-FATAL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Null Driver partner encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Collect console log and the following information and contact TAC support with this info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show platform -show process spp -show process netio -show process pakman -debug netio drivers location <loc> -show logging process spp <loc> -show logging process netio <loc> -show logging start [time of day when this msg was seen] -show netio idb all brief location <loc> -show netio trace all location <loc>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-4-SYSDB_DELETE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The policy_repository process encountered an error while trying to remove the data for a deleted policy.), (Recommended Action: This can only occur when there are no references to the deleted policy in the first place, and therefore will not have any harmful effects. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-CERR_REG_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: This system was unable to register the internal error DLL. This is probably due to a faulty installation.), (Recommended Action: Be sure the libeigrp_error.dll is present in lib/cerrno. If the DLL is present, the process must be restarted before it can function correctly. If the DLL is not present, then the problem is with image installation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink-3-INCORRECT_BW_UPDATE
### Response:
(Severity: 3), (Category: L2), (Description: When the indicated member link was deactivated, bundle bandwidth could not be updated correctly as decrementing the link's bandwidth would have made the bundle bandwidth to go below zero. Bundle bandwidth is now made zero.), (Recommended Action: Check the bundle and member interface status. Verify that the bundle bandwidth is correct now. If not, shut all the members of the bundle and then no shut all the members to bring back the bundle bandwidth to correct value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-HAL_ERR_SLOT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A card or slot level HAL API function has failed in Shelf Manager. The details are supplied in the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOPPER-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This message indicates an informational message. This message is added for debugging purpose.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-HB_DECODE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that decoding of TLV format HB message failed with the indicated error code and error message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_MEM_ALLOC
### Response:
(Severity: 7), (Category: FABRIC), (Description: FIA driver memory allocation error. Memory allocation failures will happen if the the router runs out of memory or memory leak in this process or other processes. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2LIB-6-LOST_SYNC
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-VRF_REGISTER_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: The Linux Packet classifier failed to register for Linux Socket events taking place in the specified Linux Network Namespace. This may cause packets which should be handled by Linux applications to get dropped.), (Recommended Action: Attempt to recover by restarting the xlncd process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-ERR_INIT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: netio initialization error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-MEMORY_LIMIT
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting more memory than the system has available for virtual services.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_PAK_CLIENT_ACCESS
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS encountered an error while accessing a packet buffer. The relevant packet has been ignored. The message describes the nature of the error. If the problem is transient then IS-IS will recover. The error may be due to a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. Consider restarting IS-IS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OCIFIP_V6MA-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SC_CARD_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Shelf controller is failed due to i2c hung even after all possible recovery action.), (Recommended Action: This condition indicates a potential hardware problem with the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-ASIC_CS_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_INTERFACE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to update RIB after an interface state change event.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-VER_MISMATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SyncAgent has detected incompatible versions between its Client API and the currently-running server.), (Recommended Action: Update the software image on all nodes to use the same SW version.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPENET-2-MDI_READ_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCI bus transaction on the device has failed due to an inconsistency between the hardware and software state of the ethernet device. To recover, the driver must be restarted and the hardware reset.), (Recommended Action: No end user action is needed. If the problem is not corrected by a device and driver reset, then there is a hardware issue and the device is deffective.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-CORRUPT_CONTEXT
### Response:
(Severity: 6), (Category: OS), (Description: Looks like the core context infomation dumper stores is corrupted. The conext is being reset, all existing context infomation will be lost.), (Recommended Action: This is an informational message.Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-ATTRIBUTE
### Response:
(Severity: 3), (Category: ROUTING), (Description: FIB maintains a per-table attribute database, but was unable to process it.), (Recommended Action: Try restarting the fib process to see if the problem goes away. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMHAD-7-ERR_INIT
### Response:
(Severity: 7), (Category: OS), (Description: The Platform Manager HA Driver DLL was unable to initialize due to internal software resource issues.), (Recommended Action: The Platform Manager HA Driver DLL will exit and the client process should handle the error accordingly. Please exam the output of show logging to see if similar issue had occured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-1-RX_ESPI4_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a FRAME/FIFO_OVF/DIP2/OOF Error.), (Recommended Action: Restart the Jacket Process. If the problem persists, reboot the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-NSR_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: BFD NSR SM failed because of the timer init failure.), (Recommended Action: Restart corresponding bfd process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_ISSU_LOAD_DONE
### Response:
(Severity: 1), (Category: INSTALL), (Description: The ISSU Load operation has completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-4-GASP_INIT_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: Failed to initilise fabric CDR Driver for gaspp infra. It won't affect normal working of CRD driver.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-0-ASIC_ERROR_RELOAD_SYS
### Response:
(Severity: 0), (Category: PLATFORM), (Description: An ASIC error has occured and need to reload system), (Recommended Action: An error has happened and need to reload the system. Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-BACKUP_BOOTLOADER_LOADED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The Backup Bootloader images has been loaded on the indicated card. This can happen when card manager detects that the Primary image is corrupted, and the HW fallbacks to load the backup image to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for IOFPGA to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-FILE_OPEN_ERR
### Response:
(Severity: 7), (Category: HA), (Description: Resmon library failed to open file to write processname.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-VPWS_INVALID_ETH_TAG
### Response:
(Severity: 3), (Category: L2), (Description: An EVI/EAD route with ethernet tag 0 was received for a VPWS service. Most likely scenario is that the remote side is configured for a different type of service.), (Recommended Action: Perform network level review of EVPN configuration, and ensure the correct service types are being used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_LOGGING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an warning message to indicate that the user made a change collecting the NPDatalog during an NP recovery action.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON-3-HOSTOS_HEARTBEAT_EXCHANGE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: Host OS failed to respond to heartbeat exchange request. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CHKPT_INVALID_TABLE_NAME
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An invalid checkpoint table name was detected. The affected checkpoint operation will not be processed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-ARM_DEVICE_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This is during the device Initialization. Could not arm the device to pulse us on data available), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you enable Ethernet OAM on an interface in Cisco IOS XR?
### Response:
To enable Ethernet OAM on an interface in Cisco IOS XR, use the 'ethernet oam' command in interface configuration mode. You can also configure Ethernet OAM parameters such as the mode (active or passive), link monitoring, and remote loopback using the 'ethernet oam' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-MUTEXOP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition, a mutex operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin trace all location 0/x/CPUx - dumpcore running <process name> location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-HEALTH_MONITOR_PON_RECOVERY
### Response:
(Severity: 3), (Category: L2), (Description: An Beluga SW error has occurred and requires pon-reset to recover. The Beluga ASIC was in a Halt state for and extended period..), (Recommended Action: This informational message indicating that the required error recovery action took place.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-3-DP_CONGESTION
### Response:
(Severity: 3), (Category: L2), (Description: Applications are providing state change to the layer 2 multicast data plane hardware faster than the hardware can be programmed. Internal message to the hardware have been dropped such that IGMP snooping state is now out of sync with the hardware. The user must slow the rate of IGMP state change being received by the system. The system will automatically recover from this condition once the rate of IGMP state change has been reduced.), (Recommended Action: The user must slow the rate of IGMP state change being received by the system. The system will automatically recover from this condition once the rate of IGMP state change has been reduced.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_0_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_PKT_F0_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 0 multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-QSM_ADD_SERVICE_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: QSM publish obfl config master path failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-6-MCU_DOWN_REV
### Response:
(Severity: 6), (Category: PLATFORM), (Description: To support console tunneling, MCU firmware must be at v5 or higher.), (Recommended Action: upgrade MCU)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-CRASH_INFO
### Response:
(Severity: 4), (Category: OS), (Description: Debug crash info), (Recommended Action: Information of the crashed process. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-6-INFO_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is a informational message in the NPU Driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-MISSINGEQUALSIGN
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The equal is missing in sysdb string. The sysdb string and the command are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-REVERSION_FAILED
### Response:
(Severity: 5), (Category: ROUTING), (Description: This is to notify that reversion has failed for a tunnel.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-CERR_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during the registration of OSPFv3 error codes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_FILESAVE
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-CREATETHREAD
### Response:
(Severity: 3), (Category: MGBL), (Description: 'pthread_create() API failed due to mentioned error'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR backup tunnel interface feature?
### Response:
The MPLS TE FRR backup tunnel interface feature allows a physical interface to be used exclusively for TE backup tunnels, rather than also carrying normal traffic. The backup tunnel interface is not advertised in the IGP and is not used for SPF calculations. This dedicates the interface resources for backup and avoids potential congestion from regular traffic.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'import route-target' and 'export route-target' commands in IOS XR L3VPN configuration?
### Response:
The 'import route-target' and 'export route-target' commands are used to control the import and export of routes between VRFs. The 'import route-target' specifies which routes should be imported into the VRF from other VRFs. The 'export route-target' specifies which routes should be exported from the VRF to other VRFs. Route targets define the VPN membership and allow the creation of extranets.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-SATELLITE_LOGIN_SUCCESS
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: This indicates that a user has successfully logged into the specified satellite.), (Recommended Action: *DEBUG*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-5-SW_INFO
### Response:
(Severity: 5), (Category: PLATFORM), (Description: For displaying SIM Service Engine information message.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMATTR-3-DUPLICATE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The attribute client has received duplicate successful responses for this attribute on this interface. This would suggest that multiple attribute owners have been configured for this (interface, attribute) pair.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-MMAP_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: mmap system call failed. This might impact the core file.), (Recommended Action: Contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-ATTR_SET_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: An error occurred during initialization of detach state sysDB pthread attribute.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you configure SNMP on Cisco IOS XR?
### Response:
To configure SNMP on Cisco IOS XR, you need to define SNMP communities, set access privileges, specify the host to receive SNMP notifications, and optionally configure SNMP traps and inform requests.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-IF_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SFP or XFP or CFP or QSFP entity is inserted into the line card.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAL-3-ERR
### Response:
(Severity: 3), (Category: HA), (Description: A critical error occurred in NPU Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VEEA-3-BCMDPA_L1_PORT_CREATION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BCMDAP L1 port creation failure.), (Recommended Action: Collect show tech-support fabric, DPA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between the single-topology and multi-topology models in IS-IS?
### Response:
In the single-topology model, IS-IS uses a single SPF calculation for both IPv4 and IPv6 routes. In the multi-topology model, IS-IS maintains separate topologies and performs separate SPF calculations for IPv4 and IPv6. This allows for greater control and flexibility in routing.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-6-UPDATE_PASSED
### Response:
(Severity: 6), (Category: L2), (Description: The FPD image was updated successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR handle software package dependencies during installation?
### Response:
Cisco IOS XR automatically resolves software package dependencies during the installation process to ensure that all necessary components are installed for the proper functioning of the added packages.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-UNKNOWN_NODE_TYPE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the card type may be invalid or the infrastructure is behaving incorrectly. The current request or operation has not been carried out.), (Recommended Action: Upgrade to latest OS release. Check for unsupported hardware.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-SHM_VERSION_MISMATCH
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Shared memory version missmatch.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP_CLIENT-4-EXIT_ON_ERR
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred in the NP client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the NP driver. The root cause may be located in either hardware or software.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-UPDATE_ABORTED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package update requested on this satellite has been aborted, as requested by the user. Run 'show nv satellite status' for more information about the current state of the satellite.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-LTRACE_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: PLIM process encountered an error during software initialization. ltrace initialization is failed. So we will not get any traces using ltrace Cli.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. There was problem with hardware or software initialization. This problem can be resolved by reloading the LC 'hw-module location <> reload' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-DEV_CFP_SUPPORTED_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A supported error was detected during CFP initialization. A support error is reported when the CFP type can not be determined or it is not supported on the platform. The CFP is the pluggable optics on the line cards. CFP initialization may happen when linecard boots up, CFP OIR and line card process restart. The optics will not be enabled if an CFP supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-ERR_SRLB_RANGE
### Response:
(Severity: 3), (Category: ROUTING), (Description: LSD received a request for an SRLB range that has conflicting labels present. Configured SRLB cannot be fully allocated.), (Recommended Action: To clear inconsistencies, please run 'clear segment-routing local-block'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN to use a specific LSP for transport?
### Response:
To configure an L2VPN to use a specific LSP for transport, use the 'mpls traffic-eng' commands in global configuration mode. mpls traffic-eng tunnels
interface Tunnel0
destination 10.1.1.2
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-4-ERR_MEM
### Response:
(Severity: 4), (Category: MGBL), (Description: IPSLA modules are failed to allocate memory due to low memory conditions in the System.), (Recommended Action: Increase System Memory or stop some applications which are not required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-LRD_AVAILABLE
### Response:
(Severity: 7), (Category: MEDIA), (Description: The Standby card has been inserted and sync will be started), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_EA-3-RLB_PROG_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: RLB programming failed due to hardware error. Some of the flowspec rules (packet length/source port/destination port range) are not programmed.), (Recommended Action: No action is required. The message means that this range cannot be programmed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-6-SERVO_EVENTS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PTP Servo state transition event), (Recommended Action: This message is for information only, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-STATE_CHANGE
### Response:
(Severity: 3), (Category: SERVICES), (Description: While the SESVI EA process was checking the state for the specified interface pair, an error was encountered. The interface pair in question may be left in an inconsistent state.), (Recommended Action: It may help to restart the SESVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_HDR_FIFO_OFLOW_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg hdr fifo overflow on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_COMM_DRVR-3-ERR_DRV_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-BOOT_OVERRIDE_CMD_DEPRECATED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This informational message informs the user that this command is deprecated. Rack Serial number is empty for RPs/SCs with ROMMON 1.3 or older. Software (Shelfmgr process) no longer honors boot requests from such RPs/SCs.), (Recommended Action: Please upgrade the booting RP/SC to the latest recommended ROMMON.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-SRV6_INTERNAL_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: The SRv6 SID processing internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_EDM-3-SYSDB_REG_EDM_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 Management Agent encountered failure in registering as a server for managebility requests. It will recover itself by restarting. Typically this error is caused if sysdb is unavailable for an extended period or if there is another process that instance that is registered as the server for the same information.), (Recommended Action: If the problem persists get the output of show processes, show sysdb trace edm, show sysdb trace clientlib job <jid of ipv4_ma>. If multiple instances of ipv4_ma are seen running or trying to run (this can be due to a bug in some other area of the system), make sure that only one instance is allowed by killing the other one.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_DLL_OPEN_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 'Fail open the dynamic library.check the library is exist or not '), (Recommended Action: check the library)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_MESSAGE_ATTACH
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_CHKPT_DEL_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-SERVER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Attach server failure. %s- Failure message. %s - Reason for the failure.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_EA-3-LINK_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error occurred while attempting to join together the two halves of some SBCSVI pairs on the specified node. The pairs will not come up. If there is a standby node configured for the pairs, they may come up on the standby.), (Recommended Action: It may help to shut down, then bring up, the SBCSVI interface pairs in question.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-THREAD_CREATE_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Thread create failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPPHA-3-INITFAIL
### Response:
(Severity: 3), (Category: L2), (Description: A CPP HA initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC19
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-2-GET_EVENT_STATE_ERROR
### Response:
(Severity: 2), (Category: HA), (Description: Error seen while trying to fetch the state of the given node event.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_MGD_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: SSRP encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PPP MA process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-DISK_FATAL_EVENT
### Response:
(Severity: 4), (Category: DRIVER), (Description: The host OS is reporting a disk fatal event while performing primary volume health check.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-ENS_READ
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that a client process issued ens_read and it failed. This failure is because the server, IP Tunnel Management Agent, is either busy or there is problem in GSP communicatoin.), (Recommended Action: Please try restarting the client process with command <CmdBold>process restart <process name> location <node id><NoCmdBold>. Process name and location are included in the message already. If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-UNEXPECTED_BPDU_RECEIVED
### Response:
(Severity: 4), (Category: L2), (Description: A BPDU was received on a port that was configured for Portfast. This port will now revert to a 'non-edge' port.), (Recommended Action: Check network configuration. Should this port really be configured for portfast? Has a new network device been added to the network?)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_EVENT_MGR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in stats infra during event manager creation), (Recommended Action: Restart the process using CLI command in exec mode -process restart statsd_server If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-BAD_ATTR_TYPE
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_OBJ_LIB-3-MUTEX
### Response:
(Severity: 3), (Category: PLMGR_OBJ_LIB), (Description: The policy obj library had trouble locking/unlocking mutex.), (Recommended Action: Identify the process name and job id that report the error from the printed out message, then collect running core dump via clis 'dumpcore running <job id>', and 'show process blocked', then contact TAC with the output, which will be used only for internal diagnosis purpose. Then restart the process via cli 'process restart <job id>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CARD_YELLOW_OVERTEMP_CLEAR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Card temperature has returned 2 degrees below the configured yellow threshold.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-HA_ABORT
### Response:
(Severity: 3), (Category: L2), (Description: Openflow plug-in has encountered an error during HA restart and needs to be cold started.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-NOTLEAF
### Response:
(Severity: 4), (Category: MGBL), (Description: The entered class name is not a leaf class, as is expected by the command.), (Recommended Action: Use the classinfo command to get more information about available class names. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_UI-4-LTRACE
### Response:
(Severity: 4), (Category: APP_INFRA), (Description: The policymgr ui library ltrace infrastructure encountered an error during initialization or displaying ltrace messages, as indicated in the syslog. This should not affect the normal functioning of the system.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-MUTEX_MONREG_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server failed to register for the mutex revival and will exit. It will be restarted by sysmgr.), (Recommended Action: If packet manager is unable to start up after several restarts by sysmgr, please collect the 'sh log' output and contact your customer support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-INVALID_ARGUMENT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An invalid argument was passed. This might be a program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-PCMCIA_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCMCIA initialization error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is inserted properly if it is externally accessible. Capture 'show media' and 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REPLACE_COMMIT_ABORTED
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that the install commit triggered as part of replace operation has aborted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-3-AGT_INIT_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: An error occurred during initialization, causing SERG Agent process to abort and it will be restarted to attempt to resolve the issue.), (Recommended Action: Contact Technical Support. Repeated occurances will affect the working of the Session redundancy feature and also have performance and scale impact on Session features in general.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZAPDISK-3-ZAPDISK_COMPLETED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-PORT_AUTO_TUNE_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process failed to perform Rx auto tuning for the indicated port on the control plane ethernet switch. The impact to the control ethernet connectivity will vary based on which port was affected, and on whether the port's link failed to come up or is experiencing packet errors as a result. This failure could be due to a hardware failure or a software defect.), (Recommended Action: Use the 'show controller switch statistics detail' command to check whether the affected port's link is down or is experiencing any packet errors. If not, no action is necessary. The port should be monitored to see whether the failure occurs on subsequent reloads or SFP OIRs. If the port's link is down or errors are seen on the affected port, remove and re-insert the port's SFP. If the auto tuning still fails, the port link state remains down, or packet errors persist, reboot the affected hardware card. After characterizing the auto tuning failure, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_VM_INTR_DM_UNEXP_GNT_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_VM_INTR_DM_UNEXP_GNT_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-2-INTR_HDLR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PLDMGR encountered an error while attempting to initialize the interrupt handling thread. This means that interrupts will not be serviced by PLDMGR until the process is restarted.), (Recommended Action: The problem should clear itself, as PLDMGR will automatically restart. If the issue persists, collect the following traces in exec mode and contact TAC: show controllers pldmgr trace info show controllers pldmgr trace error)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CETHHA-7-STATS_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Packet tx/rx statistics on CPU control ethernet port.), (Recommended Action: Remove/Replace the RP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCE-2-L2CACHE_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The message is displayed whenever there is a L2 cache error in CPU.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR bandwidth protection feature?
### Response:
The MPLS TE FRR bandwidth protection feature allows bandwidth to be reserved for backup tunnels to ensure that sufficient bandwidth is available for fast reroute traffic after a failure. It prevents backup tunnels from being used for other traffic and ensures that FRR can always redirect traffic successfully.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC_CTRL-3-MULTIPLE_PRIMARY_DSC_NODES
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Multiple nodes within the system have declared the Primary DSC role. This can lead to severe system instability and traffic loss as the multiple primary nodes conflict. In order to resolve the conflict, the system will reload RSP nodes until only a single Primary node remains.), (Recommended Action: If this condition persists, check the physical connection of the Interchassis control links between the RSP nodes connecting the racks. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT0_ERR_CMD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an erroneous command on the HT0 HTDP interface. This means that the HT host core has received an HT Flush, Fence, or Broadcast packet. These packets are not supported and behavior is undefined after this type of packet is received. Note: CPP does not generate these commands.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLCTRLR-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-AIPC_CLIENT_ERR_INTERNAL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Error occured during the use of FSDB AIPC Client for the given process id(name).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NSR_PACKET-2-CANT_TRIM_CLSTR_NPH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message tells is there was an error in trimming the cluster header from the packet.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_DPM-7-CORRUPT_PERSISTENT_DATA
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Corrupt persistent data was encountered during a process restart. The data will be deleted and the process restarted automatically.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_ALARM-3-MAC_COUNTER_LIMIT_PER_NP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Bridge and bridge-port objects allocate two stats pointers for mac related features. The alarm is raised when the counters allocated exceed the platform limit), (Recommended Action: Reduce number of objects created on the NP)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-3-PTFM_NODEID_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Interflex Manager failed to get the node id from the platform at startup. The process will be automatically restarted, if it keeps restarting with same message *DDTS*), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-EVM_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: Failed in some event management functions.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-SCRIPT_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: XLNCd runs scripts on router start up and when to XR EXIs are created. A script was run that failed.), (Recommended Action: Check the script that failed while executing. Ensure that the script does not take longer than 10s to run. Then restart the XLNCd process and undo then reapply any linux networking configuration. If the problem persists through process restarts, If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-HANDLE_POWER_DOWN
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This debug message indicates the start/end of SPC power down. Since shelfmgr power-cycles this card immediately after this parking, this message might not show up on the RP console. But if there is any delay during msg_chan_connect or power down steps, then this message will help to findout which step caused the delay.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-4-NOSUCH_INTF
### Response:
(Severity: 4), (Category: SECURITY), (Description: The interface specified as source interface is not present.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-4-SID_OOR_YELLOW
### Response:
(Severity: 4), (Category: ROUTING), (Description: The SRv6 SID manager database has reached the platforms resource warning threshold. Details about the threshold can be seen with <Bold>show segment-routing srv6 manager<NoBold> command.), (Recommended Action: If this threshold is regularly reached, it may be a sign to reduce scale of Segment Routing IPv6 entries by changing topology or VPN allocation mode in BGP from Per CE to Per VRF)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_NO_MEM
### Response:
(Severity: 3), (Category: L2), (Description: CDP was not able to allocate the memory that it needed to complete the operation. CDP functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-5-NOTICE_SKIP_BUFF
### Response:
(Severity: 5), (Category: PLATFORM), (Description: A double-free condition has been avoided), (Recommended Action: Please collect the following logs, show tech-support control ethernet fast location <node>, collect dumpcore running <of process that print this message>, eth_server and bfm-server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-BLANKENTERTUPLE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The enter tuple is blank. The calling function and enter tuple are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-WDSYSMON_EVENT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: This indicates a problem with the event received from the watchdog system monitor.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_EA_OOR-4-LC_FLOWS_OOR_RED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Performance traffic monitoring has encountered an out-of-resource condition. Performance traffic monitoring process on the linecard has detected that the number of flows being monitored on a LC has reached maximum capacity. New flows will no longer be learnt), (Recommended Action: Reduce the number of flows being monitored on the NP. This can be done by 1) Modifying ACL: (a) Remove the performance traffic service policy from the interface (b) Modify the ACL used in the service policy to be more specific to match a smaller set of flows to be monitored (c) Reapply the service policy to the interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_INARP-2-NOMEM
### Response:
(Severity: 2), (Category: L2), (Description: Memory on the box is critically low.), (Recommended Action: Check memory conditions on the node. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDO-7-DEBUG
### Response:
(Severity: 7), (Category: L2), (Description: ATM SPA GDO L-AIS insertion/removal debug messages), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp graceful-restart' command in Cisco IOS XR?
### Response:
The 'mpls ldp graceful-restart' command enables the LDP Graceful Restart (GR) feature. LDP GR allows an LDP session to be maintained during an LDP process restart, avoiding the need to re-establish the session and minimizing traffic loss. It requires the neighboring routers to also support LDP GR and to maintain the forwarding state for the LDP labels during the restart.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_SYSMGR_PROC_READY
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered an error to report process ready to sysmgr. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-INVMGR_MAX_SLICE_NUMBER_MISMATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The NP driver received max slice number diff than existing value), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT1_OFLOW
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP overflow error on the HT1 interface. This error is logged when a packet is received and has no buffer available to receive it.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-DEVICE_ALREADY_REGISTERED_BY_ANR
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'The autonomic network registration authority ' 'will not allow this device to join as it already ' 'registered with a different public key'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-7-DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message is for debugging purpose only and doesn't indicate any failure), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCDMA-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_IM_BATCH_STATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-4-RATE_LIMIT_WARNING_MP_LOW_WATERMARK
### Response:
(Severity: 4), (Category: L2), (Description: BFD has released some of the previously allocated packet per second usage or number of BFD sessions and is now less than or equal to 85 percent of its allowance on at least one multipath-configured linecard.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-GET_PROC_GETGREG_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Dumper collects all the process related data by using system call devctl. If a devctl fails, then the core file will be incomplete. This will not impact the system.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ZERO_RECORDS
### Response:
(Severity: 3), (Category: OS), (Description: Query returned table empty.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-TIMESTAMP
### Response:
(Severity: 3), (Category: ROUTING), (Description: An operation failed during timestamp processing.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SELECTION_FALLBACK
### Response:
(Severity: 6), (Category: L2), (Description: There is no longer a line or external source available for the specified selection point, so it has fallen back to the internal oscillator if available, or otherwise disabled the outputs.), (Recommended Action: This message is for information only, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-SYSTEM_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: There was an AIB initialization error. The process will attempt to recovery by restarting. There will be no effect on traffic unless shared memory is unusable, and needs to be reset.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IS-IS handle route leaking between different levels?
### Response:
Route leaking allows L1 routers to reach destinations outside their area by sending traffic to the closest L1/L2 router. L1/L2 routers can also summarize routes within their area to control route leaking.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-OBJ_NOT_FOUND
### Response:
(Severity: 7), (Category: HA), (Description: The object could not be found in the given table when attempting to map the object ID to a memory address.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMP-4-MSG_WARN
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-2-ASIC_FATAL_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar driver detected fatal ASIC error.), (Recommended Action: Please try reloading the card using command 'hw-module location <> reload' to recover. If the message occurs during every power cycle then please contact tech-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_SSO_ALERT
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA received replicated SSRP state for this interface for either which is incompatible with the local config, as identified in the error message. This means the replicated state will not be used to preprogram the session.), (Recommended Action: Check that the configuration on the Active and Standby sides of the SSRP channel is consistent. The error message should indicate which particular piece of config there may be problems with.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLC-6-MSG_BCDL_UNINITIALIZED_ERROR
### Response:
(Severity: 6), (Category: OS), (Description: BCDL consumer dll hit some error condition.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error , Error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-TOOMANYALIASES
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The system has 1000 aliases limitation'), (Recommended Action: 'please remove some unused aliases before defining more aliases' *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_BDL_DATA
### Response:
(Severity: 4), (Category: L2), (Description: The data specified in the IM attribute notification cannot be interpretted. The information is invalid and the result is that adjacencies for these bundles or subs cannot be programmed in hardware.), (Recommended Action: Delete and recreate the bundles or sub-interfaces. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-POWER_REJECTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: 'The power required for this card exceeds the available power on this system.'), (Recommended Action: - Please collect the following CLI command to determine the current budget situation and to see if there are any failed power modules. <CmdBold>admin show environment power-supply<NoCmdBold> - Install additional power supply modules and in case of presence of failed power module(s), replace those unit(s).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-REGCOMP
### Response:
(Severity: 3), (Category: OS), (Description: The server has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_38
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_CLIENT_RESYNC
### Response:
(Severity: 4), (Category: IP), (Description: An error occurred while resyncing data with ARP clients. In this situation ARP will schedule a retry.), (Recommended Action: The process would recover by itself as there is a retry mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_EDM-3-ENCODE_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: A process has requested information from ipv4_io through SysDB, probably as a result of executing a show command. The data requested could not be encoded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-IDB_PLATF_UPDATE_TOO_LONG
### Response:
(Severity: 4), (Category: ROUTING), (Description: We don't expect platform updates to take too long. This can block other processes that need to communicate with fib_mgr, for instance, for config, etc.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO_COMMON-4-BLOCK_UNTIL_ACTIVE
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to block on System Manager on a node which is in standby role and wait for the node to go active.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-2-CPI_SELF_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Shelfmgr received incorrect presence indication for this RSP slot.), (Recommended Action: This error can happen if the RSP is improperly seated in the chassis. 1. Please issue the following CLI command to switch away from this RSP and make the standby RSP active: <CmdBold>admin redundancy switchover<NoCmdBold> 2. Then reseat the RSP you switched away from very carefully into the chassis, making sure it makes full contact with the backplane pins. 3. During the maintenance window, then switch back to this RSP again and verify the error has gone away. If not, there may be an issue with either this card or the chassis backplane; please contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_INHERIT_OFF
### Response:
(Severity: 6), (Category: L2), (Description: The specified BFD session is no longer inheriting BFD state from another BFD session.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_RIB_PATH
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS was unable to install a path to the specified network in the specified RIB because the RIB rejected the request. This is an internal software programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACSEC_EA-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: The macsec_ea process failed to initialize, the process will be automatically restarted. MACSec functionality will be down on the affected node.), (Recommended Action: Please confirm if the process state of macsec driver is RUN. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Roulette process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Verify process is up and running, give CLI: If it is still non-operational, use CLI: If it is still non-operational, perform card reload. If still non-operational, contacting TAC and performing RSP switchover is recommended.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-FAB_ERR
### Response:
(Severity: 3), (Category: DIAG), (Description: The fabric diagnostic test has detected an error as part of the FIM. Fabric multicast and unicast tests aimed at identifying the faulty plane(s).), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_EVM_TM_ATTACH
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to allocate a timer object.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-2-SANITY_FAILURE
### Response:
(Severity: 2), (Category: L2), (Description: EDRM server process encountered critical data sanity failure. A reason text is supplied to describe the error.), (Recommended Action: No manual recovery action required. The host VM will be automatically reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VEEA-4-BCMDPA_L1_PORT_UNSUPPORTED_PFC_ON_LLFC_ENABLED_INTF
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PFC and Flowcontrol co-existance is not supported. If PFC is enabled on a flowcontrol enabled interface, we dont reject the config but PFC is not enabled in Hw and wont work as desired.), (Recommended Action: Unsupported config, fix config. For PFC to work remove flowcontrol config and remove/readd PFC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-LOCK_WRONG_COUNT
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code. The lock list was corrupted.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-3-EVM_CONTEXT
### Response:
(Severity: 3), (Category: OS), (Description: Event-manager is unable to get the context from the given evm. There could be systemic problems and the process will attempt to recover with a crash.), (Recommended Action: This is an internal error and should be reported to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1_LNM-3-MAJWARNNOISE
### Response:
(Severity: 3), (Category: L2), (Description: Noise on the link identified in the message has either crossed or fallen below the threshold value configured by the user for major warning level on this controller. Video or voice quality may be affected if noise is above the configured threshold.), (Recommended Action: This link requires administrative attention. If noise is at or above the configured threshold, this may require removing/replacing this controller from service. If noise is below the configured threshold, the administrator may choose to put this link back into service or wait until noise has fallen below minor-warning level threshold.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_ITER_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_SW_IMAGE_CORRUPTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-3-SVC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A service API failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-CTRACE_SERVER_INIT_FAILURE
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: During system initialization trace server failed to initialize.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON-3-HOSTOS_HEARTBEAT_PUNCH_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Heartbeat exchange with Host OS failed. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-5-OOR_GREEN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Device has come out of severe resource constraint state), (Recommended Action: Please collect the DPA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CAIBIST-3-DEBUG_REGISTER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Debug register has failed, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-OPTICS_PHY_SERDES_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Serdes signal fault detected/cleared between optics and phy.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_ENCAP_DB-2-NH_NOTFOUND_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: nh not found in avl tree), (Recommended Action: The following needs to be collected and DE team to be contacted. show encap-id platform egress-db all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-7-ERR_DEBUG_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver was unable to register with the debug. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_RETRY_EXCEED_PROTECT
### Response:
(Severity: 4), (Category: L2), (Description: After attempting to initialize the Protect module a number of times, the retry limit has been exceeded. The cause of the failure is very likely to be some external communication failure - so check for evidence of this. The process will exit and be restarted automatically so no futher action is needed for Bundle Manager to retry.), (Recommended Action: Check that other processes are not reporting communication errors, as this is likely to be a general communication problem. The Bundle Manager process has exited and will be restarted, so no action is needed, though unless the root problem is resolved the process will still not be able to startup.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-ERR_UNSUPPORTED_GROUP
### Response:
(Severity: 3), (Category: SECURITY), (Description: RADIUS does not support command authorization and command accounting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_PWHE-4-EA_ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: The PWHE EA process failed to initialize a critical component. The process cannot proceed and will restart to recover.), (Recommended Action: The process should recover automatically and no further action is required. If problem persists, it is suggested to collect 'show tech-support l2vpn' and 'show running-configuration' and contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-3-GET_CONTEXT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured while trying to get context.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-BACKUP_NOT_READY_ALARM
### Response:
(Severity: 4), (Category: HA), (Description: Set: When the backup process groups remain in not ready state for a prolonged period. Cleared: When the card where the backup process groups are located is removed, reset or goes ready.), (Recommended Action: Use show redundancy to see not ready conditions. If alarm persists, collect show redundancy trace location all, show redundancy, and show logging and contact customer service.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-PREEMPT_TIMER_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred while trying to start the pre-empt delay timer for the sub-interface specified in the message. As a result, any PVSTAG or PVRSTAG VLAN instances for VLANs matched by that sub-interface will use the normal values, and not the startup values, when sending BPDUs. This may cause peer devices to forward traffic on those VLANs to this device, before this device is ready to accept it. As a result, traffic may be dropped for a short period of time.), (Recommended Action: No action is necessary; the system will recover automatically once the full forwarding state has been recovered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_RX_ALIGN_LOSS_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Rx alignment loss on XAUI to NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-FAB_SRCC_FAILURE
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostic test for fabric SRCC has detected an error. SRCC allows for the test cells to specify an exact route through the fabric based on IngressQ physical link number and each of the S1, S2 and S3 ASICs physical link numbers. The test is capable of potentially isolating a problem to a single link and/or ASIC.), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_PKT_LEN_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error FIA 10 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NH_TO_RIB_ADDR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to convert nexthop into RIB address using the gateway AFI.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-ING_L4_ARRAY_OFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: L4 array overflow on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TP_SW-4-TP_LXC_RESTART_MSG
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that TP-LXC is restarted), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT0_CRC
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP CRC error on the HT0 interface.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-RCV_REGISTER
### Response:
(Severity: 4), (Category: L2), (Description: After a system event, CFM was requested to re-register to receive packets on all the interfaces where it is enabled, and to re-program the offload service for sending and receiving CCMs for all offloaded MEPs, but one or both of these operations failed for some interfaces. CFM packets may no longer be sent and/or received on the affected interfaces.), (Recommended Action: If the error persists, it may be cleared by restarting the cfmd process on the node where the error is occurring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-AIS_GEN_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred when attempting to generate or disable AIS messages for a number of local MEPs. This event was triggered by either a change within the network (e.g. to a remote MEP or to an interface state) or a change in configuration (e.g. a CoS bit or AIS transmission interval change). This may result in AIS being sent at the wrong level or interval, no AIS being sent at all, or AIS being sent when it should not be. If the error persists, CFM may not operate correctly.), (Recommended Action: If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was triggered by a change in the network, the error may be cleared by restarting the cfmd process on the node where the error is occurring, or shutting down and re-enabling any affected interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-RESET_ON_I2C_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that the I2C server on the specified node encountered the specified failure. Shelfmgr will attempt to reset the board which sends the alarm.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GETMEDIA-4-INVALID_PARM
### Response:
(Severity: 4), (Category: MEDIA), (Description: An application is passing an invalid application type parameter to get the storage media), (Recommended Action: It will be a harmless message if application retries with right parameter later or defaults to a right device. Report this message, console log and show media output to TAC if router malfunction.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_8_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PIFIB-7-ERR_DEBUG_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug. The facility to debug the component may not work.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-4-WARN_BADAUTH
### Response:
(Severity: 4), (Category: IP), (Description: The peer HSRP router has mismatching authentication settings. The authentication string in the HSRP packet did not match the locally configured value. Consequently this peer is ignored.), (Recommended Action: Check the authentication settings on the local device and the peer device(s))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-MRIB_CONN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace mrib error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace mrib error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlea-3-NO_STATS
### Response:
(Severity: 3), (Category: L2), (Description: The VLAN EA process encountered an error while registering with the statistics server process. No VLAN sub-interface statistics will be gathered on the given linecard.), (Recommended Action: This error message indicates a problem with in the statistics server process on the RP, or with the communications between the linecard and the RP. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_SYSDB
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the SysDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SysDB server, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-2-XGXS_RX_SYNC
### Response:
(Severity: 2), (Category: L2), (Description: The XGXS Rx Lanes failed to synchronize after a Xenpak OIR or Link Flap.), (Recommended Action: Try to shut/no shut the port. If the MAC does not get enabled, then A physical OIR of the Xenpak device will be needed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-3-ERR_LOCAL_TO_REMOTE_STATIC
### Response:
(Severity: 3), (Category: L2), (Description: Statically configured MAC address on remote router is already used by a locally learnt host. Static configuration on remote router will take precedence. All traffic destined to MAC address will be forwarded using static MAC configuration on remote router.), (Recommended Action: Please assign different MAC address to local host or change statically configured MAC address on remote router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_REMOVE_ATTACHMENT
### Response:
(Severity: 4), (Category: SECURITY), (Description: The Firewall Controller has tried to remove an attachment as a result of a notification from RSPP, but has failed to do so. This may result in inconsistent data in the firewall controller and unexpected behaviour.), (Recommended Action: If the firewall controller behaves unexpectedly, the problem may be resolved by restarting it using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-UNSUPPORTED_MAC_LENGTH
### Response:
(Severity: 3), (Category: L2), (Description: EVPN only supports MAC address length of 48 bits.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-HOMEPATH_STATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The homepath state of lsp has changed for this tunnel.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status homepath-state' \ interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-2-ETHSVR_INIT_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Eth Server Initialization failed. Eth Server will be restarted to overcome transient failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_SYSDB_ACCESS
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while accessing the specified SysDB item. This may be due to resource starvation or an internal software programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. The IS-IS process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROLLER_XC-3-PROC_INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during initialization with a necessary service for the process. The process is unable to run.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-6-UPDATE_COMPLETED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Entitlement update from consumption model is completed.), (Recommended Action: 'INFO')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-1-PCIE_TX_FIFO_SBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-6-LTRACE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2VPN component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_DIKE_TO_NBR_CREATED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic Network Control plane - DIKE tunnel ' 'established to neighbor'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-MISC_ADD_MOD_DEL_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An attempt to create/modify/delete sw/hw object failed.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-SUDI_AVAILABLE
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Secure unique device identification number ' 'is available on the device'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-CERTIFICATE_VALIDATION
### Response:
(Severity: 3), (Category: LICENSE), (Description: The ID-Cert validation failed.), (Recommended Action: Please check the smart agent syslog file for more information. Please turn on the smart agent debug mode (CLI command: license smart debug enable) and retry again for additional information. Please check if the ID cert expiration date has been reached.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_3_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-RACK_TO_STR_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Nodeid conversion API has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-MSG_SEND_PULSE
### Response:
(Severity: 3), (Category: OS), (Description: (CJ-FIXME)SM process tried to send a pulse to the clients channel using MsgSendPulse api and encountered a failure.), (Recommended Action: Collect system log information for the reported service and pid. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XCVR-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message from the XCVR, it indicates that something has gone wrong internally in the XCVR.), (Recommended Action: File a DDTS)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_LQ_OFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 0 LQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TMPL-7-INTERNAL
### Response:
(Severity: 7), (Category: SUBSCRIBER), (Description: An unexpected internal error occurred in the template manager subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_ISB_INIT
### Response:
(Severity: 3), (Category: L2), (Description: bfd_agent encountered an error while initializing its interface database information. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will reload the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-1-OOR_RED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is a severe error message in the DPA module to indicate high usage of DPA resources.), (Recommended Action: Please collect the DPA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-CONFIG_ERR
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq has various queues that are used by Ingress ASICs to send specific stream of traffic. These queues are specifically configured before they are used to forward traffic. Ingressq recived a few packets in queues that were misconfigured or not configured at all. The driver will automatically try to recover from the condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-CONFIG_INIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Initialization cannot be completed because sysdb is not ready to accept registrations.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM_PLATFORMS-2-ERR_INT
### Response:
(Severity: 2), (Category: L2), (Description: Error in cem operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_NETIO-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when registering debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-ASIC_CS_INFO
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_PM_SHM-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shared memory access operations like init,open or bind might have failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show shmwin trace < ><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show shmwin trace < ><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show shmwin summary < ><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show shmwin summary < ><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show shmalloc trace < ><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show shmalloc trace < ><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-3-DB_CORRUPT
### Response:
(Severity: 3), (Category: LICENSE), (Description: This message occurs when the license manager detects corruption in the license database that cannot be repaired. The license database will be cleared and implicit evaluation licenses will be available for 90 days.), (Recommended Action: If a backup of the license database is available it can be restored with the 'license restore' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8508-3-CORR_ECC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCIE device correctable ECC error), (Recommended Action: This error is a momentary error and software should be able to correct it. If the issue persists please, contact your technical support representative with the gathered information. No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-2-NOT_MAX_PORT
### Response:
(Severity: 2), (Category: L2), (Description: While enabling the POS ports, all ports were not enabled.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - Check for memory usage, this is a very corner case)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-IM_CAPS_UNKNOWN
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has received an IM message referring to a capsulation number that IS-IS does not recognized and is not able to handle. This is an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_SCH_MEMP_ERR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Scheduler Hang, Sram or egress mid-fifo parity error on NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_CLEAR_FSTATS_ALL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Plane Statistics CLI encountered an error in trying to clear the fabric plane statistics as a result of sysdb call failure. This software error will cause the following fabric plane statistics getting appended to the previous ones. No other system functionality will get affected due to this.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_UNREPLICATE
### Response:
(Severity: 4), (Category: L2), (Description: When attempting to unreplicate the bundle from the specified location(s), the unreplication operation failed. Some hardware resources may continue to be used for the bundle on the specified location(s). It is also possible that there could be a problem replicating the bundle to those locations again if a new member is added.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-FSM_ROOT_TIMER_CREATE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager was unable to initialize the timer infrastructure required to monitor the booting of nodes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_INVALID
### Response:
(Severity: 3), (Category: OS), (Description: There is an invalid parameter after a keyword in a policer definition. The policer may be assigned default characterstics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-INVALID_FAB_MODE
### Response:
(Severity: 4), (Category: FABRIC), (Description: This indicates that the fabric card in the mentioned slot is incompatible with the admin configs done for the plane participated by this card), (Recommended Action: To fix the issue please change the fabric card or modify the admin config for this plane)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-CHKPT_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while registering to existing table. This will result in failure of registering the platform dependant MRIB process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-LICENSE_RMA_WILL_EXPIRE
### Response:
(Severity: 4), (Category: LICENSE), (Description: Licenses for the specified feature which were installed using the given chassis serial number will be removed in the time indicated unless the chassis is reconnected from the system. This message appears even if the removed licenses are not active.), (Recommended Action: Confirm that sufficient licenses remain on the system signed with the chassis serial number of available chassis. If necessary, obtain new licenses for the feature and install them with the 'license add' command. If there are sufficient licenses remaining signed with available chassis serial numbers, the message can be stopped by using the 'license remove' command to remove the licenses associated with the specified chassis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-7-CSPF_FALLBACK
### Response:
(Severity: 7), (Category: OS), (Description: A disjoint path couldn't be found.), (Recommended Action: Check network redundancy.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-3-PLUGIN_INIT
### Response:
(Severity: 3), (Category: OS), (Description: MBMA plugin initialization failed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC_LIB-4-UNEXPECTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An updation error has occured for IPv4 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-3-ERR_STATIC_TO_REMOTE
### Response:
(Severity: 3), (Category: L2), (Description: Remote host cannot be assigned a MAC address which is configured as a static MAC address. Statically configured MAC address takes precedence. All traffic destined to MAC address will be forwarded using static MAC configuration.), (Recommended Action: Please assign different MAC address to remote host or change statically configured MAC address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-3-SEND_ASYNC
### Response:
(Severity: 3), (Category: L2), (Description: The fr_socket process failed to send asynchronous pulse to Frame-relay socket Event manager. This may cause disruption in packet read.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP temperature greater than or equal to the high temperature alarm threshold. The XFP is the pluggable optics on the line cards. The temperature threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational, and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the configuration rollback feature in IOS XR?
### Response:
The configuration rollback feature in IOS XR allows you to revert the configuration to a previously committed state. This is useful for quickly recovering from configuration errors or rolling back to a known good configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-MSG_SIZE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-AIS_GEN_TIMER
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred while starting or restarting the AIS generation timer. No further AIS messages will be sent for MEPs/interfaces in this service/bridge domain.), (Recommended Action: Unconfigure AIS generation on the service or interface, then reconfigure it. If the problem persists, it may be possible to recover by restarting the 'cfmd' process on the node where the problem occurs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: L2), (Description: SysDb bind API fails for some reason. This should be analyzed. first %s - Type of SysDb bind second %s - Error string), (Recommended Action: Contact support with the required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-3-FAULT_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Fault Detected), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IPV6CP_OPTS_INCONSISTENT
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA has negotiated inconsistent IPv6CP options. The message details which options are inconsistent. IPv6CP will be brought up, but the inconsistencies could cause problems. The most likely reason for this is a misconfiguration, either locally or on the peer.), (Recommended Action: Consider changing the relevant configuration either locally or on the peer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH_UPGRADE-7-PACKAGE_SUPPORTS_NO_NODE_TYPES
### Response:
(Severity: 7), (Category: INSTALL), (Description: Instructions in package list no node types for which the package can be activated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_FAILED
### Response:
(Severity: 6), (Category: INSTALL), (Description: An install operation failed. Use 'show install log <install ID> detail' for more details.), (Recommended Action: Please use 'show install log <install ID> detail' to obtain more information about the failure and take corrective actions if necessary. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different levels of the MPLS VPN CSC feature?
### Response:
The different levels of the MPLS VPN CSC feature are\n- CSC-1: Customer carrier uses IP to transport MPLS VPN services\n- CSC-2: Customer carrier uses MPLS to transport MPLS VPN services, but does not use labels (IP+BGP)\n- CSC-3: Customer carrier uses MPLS to transport MPLS VPN services, and uses labels (MPLS+LDP)\n- CSC-4: Customer carrier uses MPLS to transport MPLS VPN services, and uses labels with BGP label distribution (MPLS+BGP labels)\n- CSC-5: Customer carrier uses MPLS VPN to transport MPLS VPN services (MPLS VPN+LDP+BGP labels)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-MUTEX_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: A error occurred in the initialization of the primitives used for thread synchronization. This is most likely a system error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> trace all - show running-config - show configuration failed - show configuration history 5 - show commit changes <last 5> - show process ospfv3 location all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCDS-3-ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Required functionality failed or returned an error), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM_CS-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Platform Manager info for some action taken.), (Recommended Action: No action is required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-NODE_REBOOT_RECEIVED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The indicated node notified shelfmgr about its software reboot with the reboot reason and cause code.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_COMMITTRANS
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ether_spa_plugin-6-UNSUPPORTED_OPTICS
### Response:
(Severity: 6), (Category: L2), (Description: The Transceiver module inserted in the specified port is not supported.), (Recommended Action: Collect the PID, Vendor Information of the Transceiver from the CLI 'show controllers TenGigE<>/<>/<>/<>' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_8P_GE-3-PORT_DEL_TIMEOUT
### Response:
(Severity: 3), (Category: L2), (Description: Port deletion failed to complete within the timeout period.), (Recommended Action: Upon seeing this message collect the trace log via 'show plim ether trace error location <>' 'show plim ether trace info location <>' 'show tech-support ethernet ' and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BINDING_FORCE_DELETE
### Response:
(Severity: 3), (Category: IP), (Description: Binding is forcefully deleted.), (Recommended Action: Note the Parent-Event-Id from the error message. Look for the error message (parent error message) with Event-Id same as the Parent-Event-Id of this error message to know the reason of why this binding is forcefully deleted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-RELOAD_FAILED_NODES
### Response:
(Severity: 2), (Category: INFRA), (Description: A user requested reload-failed-nodes action is about to take place which will result in failed nodes being reloaded and held down until the current install transaction has completed. When the install transaction is complete these nodes will be reimaged so that all nodes in the system are running consistent software.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-DLL_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Process failed in opening dll.' 'ISSU operation will continue without any error.'), (Recommended Action: 'ISSU manager will retry opening dll after sometime.' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-ATTACH_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT was not able to attach to plim interface .), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-LWA_REM_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to remove a username from the LWA DB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-MISCONFIGURED_INTERFACE
### Response:
(Severity: 6), (Category: L2), (Description: A profile can be configured that has configuration parameters that are not supported for all interfaces on the router. If that profile is later attached to an interface for which not all its values are supported, this message is generated. The interface will use the default values for any parameter that is out of range but the show commands and OAM PDUs will contain the configured value from the profile rather than the operational value. The configuration parameters that may not be supported are support for remote loopback and support for link monitoring events. Further, the window size of a link monitor event must be a multiple of the interface's statistics' poll interval.), (Recommended Action: Nothing need be done if the default values are acceptable for the invalid parameters & the incorrect values in show commands & OAM PDUs do not affect operation. Otherwise, modify the profile to contain only configuration that is supported for the interfaces to which it is attached, or use an alternate profile for this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-SYSDB
### Response:
(Severity: 3), (Category: MGBL), (Description: A SysDB operation carried out by the HTTP CLI Agent returned unexpected results.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-ERROR_PARAM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate some problem with the code. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-TRANSPORT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRS: This indicates that there is a problem with control ethernet cables or switches to that node. C12k: This indicates that there is a problem with MBUS communication to that node.), (Recommended Action: CRS: Check the control ethernet connectivity to the node. (Check if the cables are okay and also if the switch is operating normally). C12K: If the error persists for a long time, please check the MBUS communication to the node. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSNMP-3-NOMEM_FOR_INIT
### Response:
(Severity: 3), (Category: SNMP), (Description: Not enough memory was available for snmpd to set up its internal data structures.), (Recommended Action: Try stopping some running processes, or wait awhile before restarting snmpd. If the problem persists after several tries, please contact your customer support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-RECONNECT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: STP has encountered an error while attempting to resynchronize its data with Interface Manager. The process will restart automatically to correct the problem.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-PTHREAD_FAILURE
### Response:
(Severity: 7), (Category: HA), (Description: A call to a Posix Pthreads function failed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
protect_debug-7-DUMP_HANDLE_HDR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-3-NET_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: This error indicates that the igmp snooping process failed to send out a packet or a pulse.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error verbose<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error verbose<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-PORT_NUM_CHECKPOINT_READ_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: PTP was unable to read port number information from checkpoint.), (Recommended Action: The system should recover, no further action should be required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-MGD_TIMER
### Response:
(Severity: 3), (Category: OS), (Description: A call to a mgd timer interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-6-ASIC_RESET_REASONS
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message is seen when fabric ASICS are being reset. The status reported here provide information about the reason for the reset.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO-4-INV_PKT
### Response:
(Severity: 4), (Category: L2), (Description: A malformed packet was detected in a batch passed to the SPIO platform libraries.), (Recommended Action: If any problems are seen, they may be rectified by restarting the affected process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_MGT_CV_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 MGT code violation on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The pfilter_ea process failed to initialize. This pfilter_ea process programs the 'packet filter' security access control list in the hardware. If the pfilter_ea process fails to initialize, the access control list cannot be programmed into the hardware. %s - indicates the reason for the initialization failure. %s - is the decoded error reason.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process pfilter_ea location 0/x/cpu0' to verify that the process is up and running. If it is still non-operational, try doing 'process restart pfilter_ea location 0/x/cpu0'. Collect all debug information if the process is continually restarting 'debug pfilter-ea all' (during the process restart). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_ADD_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as the node location was being added to the attach point item. This will prevent the successful registration for this attach point and will leave this configuration space unverified with respect to policy configuration.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-MOVE_TO_RESET
### Response:
(Severity: 2), (Category: L2), (Description: This indicates a hardware memory issue with the line card. The line card will be put to IN-RESET state to avoid further boot-up.), (Recommended Action: RMA of the linecard would be needed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-BANDWIDTH_RATIO
### Response:
(Severity: 3), (Category: QOS), (Description: The bandwidth ratio is invalid at this level. The message will provide further details on the error.), (Recommended Action: Please adjust the bandwidth parameters in the policy map.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-7-SRV6_DEINIT_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: An error occurred whilst deinitialising the SRv6 module. This could be caused by failure to release resources or by errors when calling the sidmgr.), (Recommended Action: This message is informational.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE5_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE5_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SRGB_PLATFORM_LIMIT_EXCEEDED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Platform does not support the configured segment routing global block range.), (Recommended Action: Change the segment routing global block configuration to avoid exceeding the platform maximum supported label value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-STR_NEGO_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, expected error information in case of transition between CGV6 and CDSTV/CDSIS roles on an ISM LineCard.), (Recommended Action: Please collect the console logs and following CLI output <RP> show platform show platform summary loacation <ISM Node> show running-config | i hw-module service show install active show install inactive show services role location <ISM Node> show services role registered show services role trace agent location <ISM Node> show services role trace server location <ISM Node> </RP> If the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Here is a list of possible reasons for this message (not all-inclusive). - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Resource limitations. This condition indicates a problem where the software has limited resources to operate on.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 show memory summary </RP> <LC> show cef ipv6 location <> show memory location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TLU-4-ADDR_VALIDATE_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while validating tlu address range), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_NPH_LEN_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Invalid egress NPH length detected on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-6-FMEA_ASIC_RESET
### Response:
(Severity: 6), (Category: OS), (Description: DIGI Asic Reset Triggered during FMEA.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVEDGE_DATA-6-IRL_1SLOT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Recommendation for better IRL resiliency), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_PGAR_CURR_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected PGAR Current memory error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-0-FPGA_HW_ACCESS_FAIL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: LC CPU controller driver detected FPGA access failure. This error message is thrown after observing consistent fpga access failures, one of the possible reason could be PCIE link down between PCIE switch and FPGA.), (Recommended Action: Reload the LC that has the problem atleast three times. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-CONFIG_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the Platform FIB to indicate that platform layer identified an unsupported configuration with vrf), (Recommended Action: Please validate your vrf configuration - if you exceeds vrf scale and number of vrf is more than 254 and if you have not configiured CLI (hw-module tcam fib ipv4 scaledisable) then you can see this error. it is a case of platform scale limit and can not be tracked by PI easily. Collect console log, FIB traces (show cef trace loc <>), FIB platform trace (show tech cef platform ) if the error does not go away even after reloading the box after fixing vrf scale. Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL-3-INTF_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred in rpl_ma thread code.), (Recommended Action: Try restarting the rpl ma process using the 'process restart ipv6_rpl_ma' cli. If problem persists contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install prepare clean command in IOS XR?
### Response:
The 'install prepare clean' command is used to clean up the installation storage area by removing any incomplete or aborted installations. This helps to free up disk space and ensures a clean state for future installations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-4-SYSDB_CREATEITEM_FAILED
### Response:
(Severity: 4), (Category: IP), (Description: Failed to create an item in SysDB.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_CCI_INIT
### Response:
(Severity: 3), (Category: L2), (Description: BFD SSE was unable to initialize CPU Controller interface for sending/receiving BFD packets or messages via PDMA. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will reload the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOFRR_FLOW-3-DETECT_ACTIVE_PRIM
### Response:
(Severity: 3), (Category: ROUTING), (Description: LC control plane detected that traffic is already coming on primary path. Then set the HW watchdog of ingress NP to monitor traffic loss event on the path instead of monitoring traffic activity.), (Recommended Action: It is a self-recovery detection. There is no extra action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_DEBUG_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Aggregator was unable to initialize debug. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_LIST
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRID_CLIENT-7-SEND_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: gsp sync message from grid client to grid server has failed due to one of the following reasons: 1) GSP is failied to deliver the message to grid server within timeout time. 2) GSP group is in orphan state and replies are not valid. 3) Reply is not from actual grid server. 4) Grid server fail to process client request.), (Recommended Action: Node reload is only option to recover from this failure otherwise encap failures will be seen. it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_VERIFY-6-FAILED
### Response:
(Severity: 6), (Category: QOS), (Description: The QoS EA policy verification encountered the specified error. This may happen because the QoS policy is invalid and cannot be applied successfully.), (Recommended Action: Check the output of 'show config failed' and correct the qos policy appropriately.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-CHAN_DISC
### Response:
(Severity: 4), (Category: OS), (Description: An LWM channel disconnect call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. This is an internal error and should be reported to TAC. The client process for the failed fd is having an issue disconnecting from its server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-TIMER_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred processing one or more timer events driving the MSTP engine. The process has restarted to correct this issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-SEGMENT_RENAMED
### Response:
(Severity: 7), (Category: HA), (Description: A corrupted CDM segment has been renamed for later analysis.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-BFDS_DROPPED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A synchronous BFD operation request received when server initialized in asynchronous mode or vice versa; or when server is not ready.), (Recommended Action: Controller and/or agent must ensure that BFD operation requests are sent only in the mode specified by the client initialization message and server is ready. If message is still seen after meeting these conditions, contact Cisco for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_THREAD_CREATE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to pthread_create failed. The error text is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-FANTRAY_ALARM_CLEAR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: All fans on indicated fan tray operating at the set RPM.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT1_INVALID_CMD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an invalid command on the HT1 HTDP interface. This means that the HT host core has received a non-posted write command. These packets are not supported and behavior is undefined after this type of packet is received.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_12IN1-6-DCE_CLOCK_RATE_ROUNDING
### Response:
(Severity: 6), (Category: L2), (Description: The DCE transmit clock rate has been rounded down to the next best value supported by the hardware. This is not an error but rather a informational message to explain the reduced clock rate.), (Recommended Action: No action required. This is a informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-ACP_IPSEC_TO_NBR_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'Autonomic Network Control plane - Failed to create IPSEC ' 'tunnel to neighbor'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-TABLE_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when creating the table context for the shown VRF name, AFI, SAFI. As a result table can't be activated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_MGT_CV_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 MGT code violation on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ASIC_WRITE_ACCESS
### Response:
(Severity: 6), (Category: FABRIC), (Description: This indicates a failed access to the ASIC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ICMP-7-SYSDB_REG_VERIFY_FAILURE
### Response:
(Severity: 7), (Category: IP), (Description: IP ICMP library encountered failure in registering verifier with SysDB. Typically this error is caused if sysdb is unavailable for an extended period.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action.If does not recover contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_BCM8705-3-IF_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_DIR-3-NTFN_CONNECT_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: ISSU Director encountered an issue while handling a connection event from an ISSU Notification client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-ZEN_BASE_ADDR_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install label command in IOS XR?
### Response:
The 'install label' command is used to assign a label to a set of packages. This label can then be used in other install commands to refer to that specific set of packages, making it easier to manage and identify them.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-SPA_HW_ERR_THRESHOLD
### Response:
(Severity: 4), (Category: L2), (Description: A hardware error is detected on the PLIM SPA, and the error threshold has been crossed. Software will take action as described in the error message. Device: %s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Threshold of %s - the defined threshold for this error. Software action: %s - the action that software will take to try to contain or recover from the error. Recommended user action: %s - recommended action to the user.), (Recommended Action: Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_COMPLETE_PHASE_STARTED
### Response:
(Severity: 6), (Category: INSTALL), (Description: The complete phase of an ISSU operation has started - another message will be output when the phase finishes.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_PM_TEST-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: skp_pm test encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: This is just test software which the customer does not get. so there is np actiom required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-MEMORY_MAP_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Memory mapping for the file failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-BFD_DELETE_UNCONFIG_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to admin shutdown one or more sessions with the BFD server. The connection to the server will be reset in an attempt to recover from the error.), (Recommended Action: This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_14
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_16P_OC48-3-DRV_INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLIM driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (plim_16p_oc48) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMSMLIB-3-EXIT_ON_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in the PSE ASIC client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the PSE driver. The root cause may be located in either hardware or software.), (Recommended Action: *RECUR* Copy the error message exactly as it appears on the console)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_OVF_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA00 channel FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-3-ERR_UPDATE_DONE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv4_rib_batch_complete.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_svr-3-MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: The server has failed to acquire the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-2-ERR_MEM_ALLOC
### Response:
(Severity: 2), (Category: ROUTING), (Description: MPLS LSD terminated due to lack of memory for a critical operation.), (Recommended Action: The system is running under very low memory condition. Collect MPLS LSD traces and restart mpls_lsd process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-DEVICE_MOUNT_FAILED
### Response:
(Severity: 4), (Category: MEDIA), (Description: The media storage card specified failed to mount due to the specified operation. The returned error code is specified.), (Recommended Action: Format media device manually. if still fails, replace media device. Contact TAC if device is unable to mount properly)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospfv3_uv process was unable to register with SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-NODEID_TO_STRING_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Error in conversion routine.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-MC_LO_OVR_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast low priority fifo overflow error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-EBS_CPP_LP_TAIL_DROP
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Egress Buffer and Scheduling to CPP low priority tail drop.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-CHKPT_MEM_OUT_OF_RANGE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Shelfmgr encountered unexpected checkpoint memory), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-EVM_EXIT
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: Code flow exited from the main EVM block.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-6-WAIT_TIME
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational message notifying current DSC in system.), (Recommended Action: This is an informational message. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-7-OVS_DEBUG
### Response:
(Severity: 7), (Category: L2), (Description: OVS debug message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_11_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-DEVICE_FORMAT_FAILED
### Response:
(Severity: 4), (Category: MEDIA), (Description: The media storage card failed to be formatted due the specified reason. The returned error code is specified.), (Recommended Action: Format media device manually, if still fails, replace media device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD-3-NOMEM
### Response:
(Severity: 3), (Category: SERVICES), (Description: There are insufficient resources to perform some action. The error message contains more details about what action failed. In any case, services may not be operating correctly, and states may be out of sync.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Once the memory conditions have been improved, restart the Service Director process to allow it to resynchronise with its clients.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-SRP_NR_REASON_UNREG
### Response:
(Severity: 4), (Category: HA), (Description: An unexpected error condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_24
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-TPM_MAX_RESTARTS
### Response:
(Severity: 3), (Category: SECURITY), (Description: TAM restarted maximum number of times. Stalling or shutting down tam servivces until manual restart is initiated.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-BAD_ID_HW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hardware in the specified location could not be identified as genuine Cisco product by mpa manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-INFRA_RESTART_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: While activating software that requires the install infra itself to restart, install processes on some nodes failed to restart. Please check the available install recovery actions.), (Recommended Action: Please obtain the output from the console or system log, and the entire output of the following commands: <CmdBold>show tech-support install<noCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-NO_MEM
### Response:
(Severity: 7), (Category: HA), (Description: Allocating memory failed due to a low-memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CISCOSYSTEMMIB-3-SYSDB_ACCESS
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble reading from or writing to or binding/unbinding SysDB.), (Recommended Action: 'If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-7-ERR_LINK_TOPO
### Response:
(Severity: 7), (Category: FABRIC), (Description: The upstream information received from idle cells on this link does not match with FSDB information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-3-BCM_LOG_OPEN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to open the bcm_log file. Outputs are logged in stderr file.), (Recommended Action: Please do bcm_process restart to recover from this. 'process restart bcm_process location < >' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-CHECKPOINT_CANT_RELOAD
### Response:
(Severity: 3), (Category: OS), (Description: A link found in the checkpoint file could not be created in the QSM database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-1-IO_ERROR
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabricq ASIC encountered a read or write access error or its Host Processor Interface block has gone down and come back up. The access error is classified into two classes - software or hardware. Hardware access error refers to an error at the PCI link used to connect the ASIC to the host processor. Software access error refers to the error, caused by a un-discovered software bug, which makes software to perform un-supported access to an ASIC location, like writing to a read-only location.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-EDM
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred in the ATM VCCLASS EDM backend. As a result the VCCLASS data will not be delievered to the front end.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-GCS_MAC_LEAK_DETECTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Host reached max limit on number of mac requests that can be buffered and further requests will fail.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_DEBUG
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_iterate_* failed while iterating through the chkpt list.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-ISR_MSR_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver received too many interrupts within 1 second), (Recommended Action: Too many interrupts received by serial driver. Console cable may be faulty, replace and try again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between the advertise passive-only and passive-interface commands in IS-IS?
### Response:
The passive-interface command suppresses IS-IS hello packets on the specified interface, effectively preventing the formation of IS-IS adjacencies. The advertise passive-only command allows an IS-IS instance to advertise prefixes without actually running IS-IS on that interface. This is useful for advertising loopback or other prefixes into IS-IS without establishing adjacencies.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OLM-7-LMP_ROUTER_ID_ZERO
### Response:
(Severity: 7), (Category: ROUTING), (Description: All existing optical tunnels will NOT come up until an application LMP router ID value is specified using CLI.), (Recommended Action: If MPLS TE optical tunnels do not come up after this change, please make sure that MPLS TE application is using the same router ID as specified in the global router ID.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens during the build configuration stage in IOS XR?
### Response:
During the build configuration stage in IOS XR, configuration changes are validated and stored in a temporary area without impacting the running system. This allows configuration changes to be made incrementally and verified before being applied.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-BM_DEAD_NODE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: All the receive links for a particular stage have gone down triggering the ASIC to go into BM Dead Node. Software will auto recover. Dead node is expected to be seen during plane shut as well as SM OIR where it will result in all receive links of a particular stage to go down.), (Recommended Action: If the error is seen at steady state, software will auto recover. Verify that the fabric is stable. If fabric appears unstable, collected fabric show tech.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-PKG_DOWNLOAD
### Response:
(Severity: 6), (Category: INSTALL), (Description: Status information while starting package download.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-DELETE_FINT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Interface Manager has requested NetIO to delete the Forwarder Interface. This should not occur - the system assumes the Forwarder Interface is never deleted.), (Recommended Action: When this condition is hit, NetIO will assert and restart in an attempt to recover. If this message continues to be seen Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-PER_PREFIX
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route accounting for a route), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-SATELLITE_LMEP_UNPROG_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The local MEP for a Satellite Fabric Link could not be removed. The MEP, Service, Domain will still show in CFM manageability commands despite the Satellite Fabric Link's removal.), (Recommended Action: The extra MEP in CFM manageability commands can be ignored. If this is not possible the delete should be retried by bringing the Satellite Fabric Link up and then removing it again. If this persists, then try restarting the CFM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-TTY_MANAGEMENT
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected error occurred when the VTY Device DLL interacted with the TTY Management library), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR* *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDSFS-7-EDM_INTERNAL
### Response:
(Severity: 7), (Category: OS), (Description: RDSFS encountered an internal error within it's EDM, which is a non vital component for normal operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_MPLS_EA-3-ERRSTR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX MPLS-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_LPTS_EA-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: Initialization process such as getting an evm failed. sysmgr will retry to start the cpp_lpts_ea. In case its persistent, contact TAC. *RECUR* *REDUCE*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support lpts location <> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support lpts location <> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show lpts trace platform location <> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show lpts trace platform location <> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. *SH_CMD show controllers pse qfp infrastructure tcam resource-manager usage location <> *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-INSTALL_OPERATION_WARNING
### Response:
(Severity: 4), (Category: INSTALL), (Description: The behavior of the install operation may not have been entirely what the user expected.), (Recommended Action: Details of the possibly unexpected behavior are provided in 'show install log <install ID> detail'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-6-TRANSCEIVER_INSERTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This informational message indicates that the optic interface module was inserted on the given interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Bulk Content Downloader (BCDL) service?
### Response:
BCDL is a service used to efficiently download large data sets, such as forwarding tables, from routing processes to line cards and fabric cards. It leverages GSP to provide reliable multicast transport. BCDL handles downloading data to multiple consumers, tracks download state, and performs incremental updates.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOPAZ_PFI-3-INFRA_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This error is an internal infra error and when critical is handled accordingly in the code. The context of the error is provided in the actual code where this error is used. Some of the error conditions that are encountered under this is bind failure, attr query failure, set/get failures, etc. If this error is seen persistently initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_GLOBAL_OP_RETRY_THRESHOLD
### Response:
(Severity: 4), (Category: L2), (Description: After attempting to resend or query information a number of times, the retry threshold has been hit and no more attempts will be made for any global operations. The effect of the message will therefore be lost. The impact will depend on the message which was lost, but the error will give an indication as to the failure. Further information may also be found in <CmdBold>show bundle<noCmdBold>.), (Recommended Action: Restart the Bundle Manager process that reported the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-LWM
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external light-weight messaging function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-BMP_MSG_DROPPED
### Response:
(Severity: 4), (Category: ROUTING), (Description: The message queue used to enqueue the BMP messages, to be sent down the TCP socket has reached its full configured limit(in number of bytes). The limit will take the default value of 100000 bytes unless configured. Extra BMP messages will be dropped until some space becomes available enough to hold new messages.), (Recommended Action: If BGP has free space and if the configured limit is less than 100000 bytes, then this can be increased to accommodate more messages in queue. This can lead to more memory consumption and reduce memory for regular BGP operations. Dropping of messages can continue if more and more update messages keep coming from the neighbors. Reducing the update churn from the peers can alleviate this problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_MPLS_EA-3-ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE MPLS-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INCONSISTENT_MEM_CONFIG
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is inconsistent in the specification of required memory via the <memory> and <currentMemory> nodes.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause. Perform action and if it is still unclear why the memory configuration appears to be inconsistent, file a defect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-ENVMON_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-CHECKPOINT_FORMAT
### Response:
(Severity: 3), (Category: OS), (Description: A QSM checkpoint record could not be placed in the checkpoint file due to insufficient buffer space.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-FAILED_REPAIR_INDEX_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: 'An unexpected error occured in cleaning the package index file.'), (Recommended Action: Format device and re-install packages.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-STATS_CERR
### Response:
(Severity: 3), (Category: L2), (Description: This error occurs when client or DLL initialization fails.), (Recommended Action: Try restarting the process using the command- process restart l2fib_mgr Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-7-SB_MBOOT_FAILURE
### Response:
(Severity: 7), (Category: DRIVER), (Description: Additional debug infor Secure Boot validation failure.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_RESOURCE_FAIL_2
### Response:
(Severity: 3), (Category: IP), (Description: Unable to initialize internal data structure due to the process running low on resources.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the issue still persists then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-SHMWIN_MEMORY_CORRUPTION
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Shmwin has detected a corruption in shared memory of IM DB. There is a likelihood of repeat ifmgr crashes on this node unless the condition is corrected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-7-SYSDB_EDM_INIT
### Response:
(Severity: 7), (Category: OS), (Description: Procfind was unable to initialize its SysDB EDM functions handle, and therefore failed to initialize.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-CERRNO_REGISTRATION
### Response:
(Severity: 3), (Category: SECURITY), (Description: A unexpected failure has been detected while registering the Cerrno DLL.), (Recommended Action: Restarting the concerned process might solve the issue. If the message recurs, issue the following command 'show mgmt-plane trace client <clientname> both' to gather data and provide the gathered information and the exact error message as it appears to the Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-PLIM_BYPASSED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PLIM bypass jumper is installed on the MSC. PLIM power up will be bypassed, only MSC will be powered up.), (Recommended Action: Please collect required_info and remove the jumper. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_MTU_TOO_SMALL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MTU for CLNS on the specified interface is too small to allow IS-IS to send packets over that interface. This may be due to a configuration error or an internal error.), (Recommended Action: Check any MTU configuration for the interface to ensure that this is not a configuration error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-RETIMER_ACCESS_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The device mdio access failed, trying recovery by doing PON reset), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP if the asic is continuously reset and recovery does not take place after device reset: 1. 'show processes sfe_driver location <loc>' 2. Collect all traces: 'show controller sfe trace all location <loc>' 3. dmesg and /var/log/messages from host and sysadmin VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-3-MTU_IMPOSE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The specified MTU could not be applied on this interface.), (Recommended Action: Try to use an appropriate MTU; supplied MTU value could be either too small or too large)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-OPTICS_RX_LOS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Optics has detected/cleared LOS on this port), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FDI-3-EES_ANNOUNCEMENT_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: This process encountered an internal software error. [chars] provide detailed information about this error Process will restart to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_PFILTER_EA-3-ERR_L2ACL_MOD
### Response:
(Severity: 3), (Category: ACL), (Description: Modification to an attached L2ACL is not supported, only remark can be added/deleted/modified.), (Recommended Action: De-attach the ACL from all interfaces, modify the ACL and re-attach the ACL to all interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSB-3-XIPC_THROTTLED_SESSION
### Response:
(Severity: 3), (Category: IP), (Description: IP PSB Lib encountered the session, which is casuing the XIPC Queue full.), (Recommended Action: If the message is observed on the console, for this particular session dynamic rate limit policier is applied and may be casue session flap as well.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the Replicated Data Service File System (RDSFS) in IOS XR?
### Response:
The Replicated Data Service File System (RDSFS) in IOS XR is used to replicate configuration files and other critical files across RPs for high availability purposes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INV_NODEID_IN_CHKPT_MEMORY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: API Call to nodeid_extract_fields() failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-FAILED_OUTPUT_WARNING
### Response:
(Severity: 4), (Category: INSTALL), (Description: A warning occurred but failed to be output to the user.), (Recommended Action: Repeat the operation. Consult the release-notes if applicable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-ERR_BIST
### Response:
(Severity: 3), (Category: FABRIC), (Description: BIST failed for the mentioned block. The driver should trigger a device reset to fix this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
12IN1-4-LOOPSTATUS
### Response:
(Severity: 4), (Category: L2), (Description: A configurable controller loopback status.), (Recommended Action: No action reqiured. Msg displays loop status)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MGMT_NO_ATTR
### Response:
(Severity: 3), (Category: MGBL), (Description: No attrbiute name was provide to the TTY Management terminal command process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RVM_MGR-3-TIMER_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: timer fired), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-INTERNAL
### Response:
(Severity: 3), (Category: OS), (Description: The server has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: QOS), (Description: Failed to setup event manager.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-ERR_DB_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: SFE driver failed to initialize DB.), (Recommended Action: The driver will restart and try to recover. Make sure the driver restarts and recovers. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-TFTPSERVER_BAG_ENCODE_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: As mentioned in the message, the bag encode has failed for the CE-TFTP server.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and been handled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LIC_MGR-2-INIT_FAILED
### Response:
(Severity: 2), (Category: OS), (Description: The IOS XRv license manager was unable to start. This will result in a reload of the router.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-BIOS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BIOS running on the indicated card is reporting an error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-3-ARG_CHECK_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: An invalid argument was passed to the specified function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-SYSDB_SET_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The code failed to set a sysdb item while applying encapsulation config. This may be caused due to invalid arguments for which there is no current handling for the same, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_VRFN_FNS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The IS-IS process failed to initialize the handler functions for verification of changes to its configuration data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-CPU_PKT_CRC_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: IBS from CPP packet CRC error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Are SMUs platform and release specific in IOS XR?
### Response:
Yes, SMUs are platform and release specific in IOS XR. A CRS-1 SMU cannot be applied to a different platform, and vice versa. Furthermore, a release 3.3.4 SMU cannot be applied to release 3.4.2, and vice versa.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-STATSD_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: An operation failed during the Stats Server Interface registration.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel mode feature?
### Response:
The MPLS TE tunnel mode feature allows an MPLS TE tunnel to operate in either global or interface mode. In global mode, the tunnel is associated with the global routing table. In interface mode, the tunnel is associated with a particular interface and is only used to forward traffic arriving on that interface. Interface mode allows better control over tunnel utilization.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-REGISTRATION
### Response:
(Severity: 7), (Category: HA), (Description: An error was encountered during table registration. The message should indicate the error condition. This is most likely due to a coding error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-7-ERR_TTYMGMT_FD
### Response:
(Severity: 7), (Category: SECURITY), (Description: Error encountered while using TTY management library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-6-PFI_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the PFI-IFH module in the platform L2FIB LOCSW component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabricq manager encountered an error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the fabricq_mgr driver is up and running by executing the following command at the CLI of the active RP: 'admin show process fabricq_mgr location <location>' If it is still non-operational, enable the following debugs of the fabricq_mgr driver process: error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events and restart the driver by executing the following command at the CLI of the active RP: 'admin process restart fabricq_mgr location <location>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-XIF_GTFF0_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected XIF GTFF0 memory multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OLM-7-LMP_ROUTER_ID_CHANGE
### Response:
(Severity: 7), (Category: ROUTING), (Description: All existing optical tunnels will go down and will be re-established using the new router ID value.), (Recommended Action: If optical tunnels do not come up after this change, please make sure that the application is using configured to use the proper LMP router-ID)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-6-RESET_CARD_FOR_PAIRING
### Response:
(Severity: 6), (Category: HA), (Description: The DRP pairing configuration was changed. The card entering or leaving the pair needs to be reset in order to accomodate the new configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_UCORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory uncorrectable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSC-3-ERR_GSP_GROUP_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics client library encountered an error while creating group for GSP group communication.), (Recommended Action: Restart Fabric statistics client manually if the error is persistent.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SPP_LIB-6-LACP_ON_NON_BUNDLE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: A physical interface which is not configured as a bundle is receiving a LACP \ packet), (Recommended Action: show im database brief ifh <ifh value from the above message> verify the peer why it is sending lacp on the interface from the above interface name These LACP messages are punted and dropped To mitigate, fix the endpoint move to a bundle configuration or apply an l2 ether filter to drop LACP/slow protocol.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_NVSAT_EA-6-CERR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform NVSAT_EA component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_LOG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, Tomahawk specific init error), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-6-OPERATION_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message gave an informative message. This is not a failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-SEGMENT_RENAMED
### Response:
(Severity: 7), (Category: HA), (Description: A corrupted checkpoint segment has been renamed for later analysis.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_BRST_LEN_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX encountered Rx burst short or burst length error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-7-CPU_DETAILS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Details about the error seen in CPU module.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-RSPI_PROT_CTR_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: RxSPI protocol unexpected control word error.), (Recommended Action: Minor error, no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-3-INIT_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An software error occurred while starting up of RAW process. If this occurred during process startup, then the process may be restarted.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-EVM_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is an internal error in tunnel ea. The failure is while tunnel_ea is creating an event manager. The actual cause of the failure could be due to memfail/invalidargs etc.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-6-DEVICE_ENABLED
### Response:
(Severity: 6), (Category: OS), (Description: A device is enabled for logging onboard by user configuration.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-CALL_IPC_DISCONNECT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The VPDN CALL IPC failed to disconnect as a result of configuration or an internal error. In some cases, this warning message may be harmless.), (Recommended Action: If VPDN problems persist, you may need to restart vpdn_mgr or this client process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-RECORD_VERSION_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: A feature record has different version format with current software.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-MISSING_PIE_ATTRIBUTE
### Response:
(Severity: 7), (Category: INSTALL), (Description: PIE file appears to be damaged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_PIDB-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Above run time error occurred while initializing the pidb on the linecard.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers sip-pm trace pidb location <> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers sip-pm trace pidb location <> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-MAC_0_TX_FIFO_OFLOW_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: MAC on NPU-0 had transmit fifo overflow on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-3-EDM_ACT_SETUP
### Response:
(Severity: 3), (Category: ROUTING), (Description: MFWD-HFR library encountered error while initializing the EDM action event handlers), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_4_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a loopback interface?
### Response:
To configure a loopback interface in Cisco IOS XR, use the 'interface Loopback' command in global configuration mode. RP/0/RP0/CPU0:router(config)#interface Loopback0
RP/0/RP0/CPU0:router(config-if)#ipv4 address 10.1.1.1 255.255.255.255
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-KA_CFG_ENQUEUE
### Response:
(Severity: 3), (Category: FORWARDING), (Description: Failed to send the specified event from tunl_gre_ma's main thread to the keep-alive thread or vice-versa. This may result in errorneous keep-alive behavior for the tunnel specified.), (Recommended Action: Recommeded action is to disable the Keep-alive on tunnel. If keep-alive is a must, restart the process using following command. <CmdBold>process restart tunl_gre_ma<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-6-RP_ISOLATION
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that target RP has transitioned into RP isolation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-4-UNEXPECTED
### Response:
(Severity: 4), (Category: HA), (Description: An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-IM
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an error communicating with Interface Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Interface Manager Control Server, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, ELMI will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-3-UNKNOWN_OFFSET_PASSED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unkown packet offset passed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COND_DEB_RP-6-ILLIPVAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: Illegal IP-address and/or IP-mask were configuring as condition to crypto debug message.), (Recommended Action: Fix the values of IP-address and/or IP-mask in the 'debug condition crypto IPv4...' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-UPGRADE_CFP2_LASER_ON
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot do FPD upgrade of CFP2 when its laser is on.), (Recommended Action: Shut the Optics Controller corresponding to this CFP2 and try upgrade again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-ASYNC_SOCKETS_ABORTED
### Response:
(Severity: 3), (Category: IP), (Description: The socket library aborted sockets belonging to the application due to system instability.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-CM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed CM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'import route-target' and 'export route-target' commands in IOS XR L3VPN configuration?
### Response:
The 'import route-target' and 'export route-target' commands are used to control the import and export of routes between VRFs. The 'import route-target' specifies which routes should be imported into the VRF from other VRFs. The 'export route-target' specifies which routes should be exported from the VRF to other VRFs. Route targets define the VPN membership and allow the creation of extranets.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-INFRA_VRF_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The VRF feature is configured without the necessary iVRF license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-6-OIM_OIR
### Response:
(Severity: 6), (Category: L2), (Description: The Optic Interface Module (OIM) for the specified port has either been inserted or removed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-3-MIPC_ERR_NOTIF
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLU received notification from MIPC due to unrecoverable error or invalid address. PLU downloads the entire table to hardware as a recovery mechanism. This is an informational message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-3-WRITE_TIMEDOUT
### Response:
(Severity: 3), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens API , it returned failure. RDS write has not been able to write successfully and has timed out.This may be due to message size or underlying problems in transport.RDS will retry to write again.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-AIPC
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an error using the AIPC infrastructure. The error message describes what operation has failed and why it failed. This is most likely to be due to a low memory condition but may also be an internal programming error.), (Recommended Action: Consider restarting the ELMI process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_NETIO-3-INIT_DEBUG
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of debug for the NetIO caps. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-4-OOR_THRESHOLD_REACHED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Maximum number of groups accepted, either per interface or per vrf.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_0_NPU_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-0 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-MIB_STATS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MIB stats collection failed due to some internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh processes vic location <> - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-NOTIFY_LOSS_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The CFM packet handling module has detected that a peer MEP has timed out (ie that no CCM has been received for the loss time), but has failed to notify the management module. As a result, the proper handling for this event (eg generating log messages and SNMP traps) will not take place.), (Recommended Action: If the error persists, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-IF_DELETE
### Response:
(Severity: 3), (Category: FORWARDING), (Description: An error was encountered in deleting the interface for the specified tunnel.), (Recommended Action: Restart tunnel GRE MA process by executing the following command. <CmdBold>process restart tunl_gre_ma<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-6-LINK_DISC_SRLG_CHG
### Response:
(Severity: 6), (Category: ROUTING), (Description: The SRLGs discovered during signaling of the GMPLS-UNI tunnel associated with the specified controller have changed.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-CPU_BOARD_INTR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has detected CPU ERROR. Sources for this error could be one of PCI device present in the system), (Recommended Action: IN case of ERR_CORR no action is required. In case of ERR_NONFATAL and ERR_FATAL node is reloaded. An auto logging is fired which has collected log in /misc/disk1/cpu_interrupt_*.log Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-3-INT_HT0_DROP_INT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HT0 Drop Inband Message Event: HT Inband Interrupt(s) have been filtered and dropped due to a previously sent MSI that has set the H/W mask and has not been cleared by S/W.), (Recommended Action: Save log file and report this error. If the issue persists, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_INIT_EVENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: SNMP), (Description: Ltrace initialization failed. It shouldn't hamper the functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ENDCOPTIONNOTPRESENT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'end option mark is missing in the command. The calling function the coption id and the command are are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PON_RESET_START
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and need power on reset, this mark the beginning of it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-CTX_SHORTAGE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Set: A global SPP context shortage was detected in the SockIO plug-in. Reception of packets from ports and other nodes is likely to stop at any point. Clear: A previous SPP context shortage was cleared. Normal packet I/O operations will resume.), (Recommended Action: If the problem does not clear, the node should be reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR handle configuration during router startup?
### Response:
During router startup, IOS XR loads the committed configuration from the Configuration File System (CFS). If there are no configuration inconsistencies or failures, the router starts with the committed configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIA-2-HBA_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCMCIA was not able to register iteslf as a handler for PCMCIA related interrupts. This could have happened because of failure in setting the IRQ thread properties or failure in attaching to interrupt.), (Recommended Action: Reinsert the card. If not able to recover after OIR, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-7-REG_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: Registration operation with a certain server failed. The message displays the reasons.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. if message floods the console continuously and router is not able to recover from this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-1-LTRACE_INIT_ERR
### Response:
(Severity: 1), (Category: L2), (Description: Jacket process spawns the SPA process and waits for the initialization to complete. But initialization fails putting SPA into FAILED state. As a part of the above, we find the mesage Ltrace init failed message.), (Recommended Action: If the issue occurs, Check the SPA state. If it is not OK, then collect the following traces 1) show plim jacket all location 2) show hw-module traces infra detailed location 3) show plim ether trace info/error location 4) console logs)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-ERR_INFO_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error information in PLATFORM FIB HAL), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show logging, show version, show platform, show install active, show cef platform trace all all loc <>). (show cef mpls local-label <label> EOS internal location <> && show cef mpls local-label <label> non-EOS internal location <>) Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_MA-3-CAPS_REMOVE
### Response:
(Severity: 3), (Category: QOS), (Description: The Afmon MA process encountered the specified error while trying to remove the caps.), (Recommended Action: Please collect 'show tech-support performance-traffic' and contact Cisco technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NRSUTILS-3-MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: The nrs common library has failed to aquire the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-NET_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace socket error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace socket error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KEYCHAIN-6-KC_TYPE6_MK_UPDATE_COMPLETE
### Response:
(Severity: 6), (Category: SECURITY), (Description: kc_srvr has finished re-encrypting all its existing type6 passwords with the new master key. Both sysdb and database have been successfully updated.), (Recommended Action: This is just an information. No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set up RSVP policy for MPLS-TE tunnels in Cisco IOS XR?
### Response:
To set up an RSVP policy for MPLS-TE tunnels, use the 'rsvp policy' command in global configuration mode. R
P
/
0
/
R
S
P
0
/
C
P
U
0
:
r
o
u
t
e
r
(
c
o
n
f
i
g
)
#
r
s
v
p
 
p
o
l
i
c
y
 
m
y
P
o
l
i
c
y
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONCERTO-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: concerto LWM reply error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVALID_NOTIFICATION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'parser_server got an invalid notification form ovl process'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-POLICY_INCOMPLETE
### Response:
(Severity: 6), (Category: SECURITY), (Description: Valid ikev2 proposal is not attached to ikev2 policy.), (Recommended Action: Attach a valid proposal to the ikev2 policy, verify ikev2 proposal validity using \'show ikev2 proposal <proposal_name>\'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_NULL_INPUT_ARGS
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabricq asic dll encountered an internal software API error where a NULL input parameter is used.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICLIB-4-DB_DIR_ERROR
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-RULES_CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A critical error occurred in jacket driver rules validation for a SPA which results in the SPA not being enabled. This does not affect the other slots on the jacket card. Please check the SW support for the SPA slot for which this message is seen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-PLAT_OOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, Platform in OOR), (Recommended Action: This message indicates platform is in OOR. Please collect show log,Plat Traces(show cef platform trace all all loc <>), FIB Traces (show cef trace loc <>), show prm server resource summary loc < > Also check if this is a transisent OOR condition or remains in OOR for ever. Check if the box is within the scale limits defined for the platform. If yes, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-NETIO_ENCAP_CALLBACK
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS failed to setup encap callback with this particular media or base capsulation. As a result CLNS will not be able to receive CLNS packets on this caps on any interface on this node.), (Recommended Action: Please contact cisco-support with the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between OSPF LSA types 5 and 7?
### Response:
Both LSA types 5 and 7 are used to advertise external routes in OSPF. However, Type 5 LSAs are used in regular areas and are flooded throughout the entire OSPF domain. Type 7 LSAs are used in Not-So-Stubby Areas (NSSAs) and are only flooded within the NSSA. When a Type 7 LSA reaches the border of the NSSA, it is converted into a Type 5 LSA by the ABR and then flooded into the rest of the OSPF domain.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-LINK_TO_SELF
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified LSP contains a link advertisement to itself and this link has been ignored. There is no possible impact to routing as the link would not be used by other routers in their calculations. This message is however indicative of a problem in the router which issued the LSP as it should not have advertised such a link.), (Recommended Action: Identify the source of the offending packet and correct it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-BOOTREQ_MAX
### Response:
(Severity: 6), (Category: PLATFORM), (Description: If the node sends the maximum number of boot requests without actually being booted, it will be powercycled), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-LSAREFRESH
### Response:
(Severity: 6), (Category: ROUTING), (Description: User has changed the configuable LSA refresh interval.), (Recommended Action: No action required. This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-NODE_KERNEL_DUMP_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being reset because it failed to reset itself in time while in kernel dump. This means the kernel dump files that the node transported to the active RP, could be incomplete.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-BACKUP_IOFPGA_LOADED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The Backup IOFPGA images has been loaded on the indicated card. This can happen when card manager detects that the Primary image is corrupted, and the HW fallbacks to load the backup image to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for IOFPGA to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-3-PIO_CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A critical error occurred in PLIM FPGA Driver which involves exiting the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-LIST_UNDEFINED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Trying to configure a method list in the line configuration that is not defined in AAA), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-CONN_OPEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS encounted errors when opening its connection with the process mentioned in the message. CLNS will reattempt the connection by restarting.), (Recommended Action: CLNS will restart and try to recover. In case problem re-occur than Please contact cisco-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-ERR_ARP
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ARP netio error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_MPLS-3-WARNING
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv6 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|mpls] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-7-ERR_API
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The sensor entry will not be added in inventory), (Recommended Action: Check the memory on the system)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_linux-7-FUNCTION_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The function specified failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-5-SELFMANAGE_UPGRADE_NOTICE
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: NetIO gets restarted whenever we upgrade a DLL that does not support NetIO DLL upgrade. This should not cause any problems to the router and NetIO should come back up fine after restart.), (Recommended Action: This should not cause any problems in the router, NetIO should restart and come back up fine & resume its normal functionality. If it causes any routing issues such as adjacency going down or some other problem, one potential cause is that NetIO took longer to restart. NetIO restart time is a function of number of interfaces configured in NetIO on this node. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-DUP_TABLE
### Response:
(Severity: 7), (Category: HA), (Description: During registration, two copies of a table were found in the checkpoint store at the same version. This indicates corruption in the checkpoint store.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-POLICY_IBGP
### Response:
(Severity: 4), (Category: ROUTING), (Description: A policy attached to an iBGP neighbor performs operations that are illegal for iBGP routes, such as modifying the AS-path or MED.), (Recommended Action: Modify the policy to avoid the prohibited operations.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-2-SFP_INVALID_TYPE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An unexpected failure in register notification failed.), (Recommended Action: Collect system log information. Collect following CLI output: (admin)#show cemgbl edm ltrace Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_30
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-ISSU_GET_CONN
### Response:
(Severity: 3), (Category: INSTALL), (Description: During ISSU operation connection to logic router node could not be established.Failed with given error.), (Recommended Action: One node will be effected.Can retry ISSU process. If the issue persists even after tries, contact tac with 'show tech-support issu'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-L2VPN_READD
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected that an attempt was made to instantiate an L2VRF when the instance still exists. This will happen when the L2VPN module can issue two successive adds followed by delete wheres they meant to send add, delete and then add.), (Recommended Action: This msg is info only. At this point BGP and L2VPN will be out of sync Need process restart to achive sync)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-2-CRITICAL_INFO
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Critical error information during improper updation of variables or incorrect return state in MPLS FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_SYSMON-3-PROC_CNT_NORMAL
### Response:
(Severity: 3), (Category: INFRA), (Description: When number of processes/threads are below MINOR Threshold Percentage .), (Recommended Action: Not Required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-ECM_OPEN_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to open event connection.), (Recommended Action: Restarting the client process may fix this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SIGBUS_INFO
### Response:
(Severity: 4), (Category: OS), (Description: Signal info), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-6-NO_SPACE_ERROR
### Response:
(Severity: 6), (Category: QOS), (Description: QoS_EA failed to allocate space for parent ifhandle in parent_qos_array. This will cause the policymap attaching to parent and sub-interfaces. And conflicting qos actions.), (Recommended Action: Remove the parent qos policy-map and report the number of parent qos interfaces needed. 'no policy-map <parent-policy-name>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to redistribute static routes into BGP for MPLS L3VPN?
### Response:
To redistribute static routes into BGP for MPLS L3VPN, use the 'redistribute static' command in BGP VPNv4 configuration mode. router bgp 65000
address-family vpnv4 unicast
vrf MyVRF
redistribute static
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TGN-7-OPERATION_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a programmed diagnostic debug message.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-0-CPU_ERR2
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Indicates fatal error (system reset likely required to recover) This error message is thrown after observing fatal error at the LC CPU.), (Recommended Action: Reload the LC that has the problem. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-3-FATAL_PD_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The device is not capable of supporting the monitor-session configuration provided.), (Recommended Action: Remove the offending configuration. For help determining why the monitor-session configuration is not supported, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_SIGNAL_OVERLOAD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_1_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_IO-3-NOMEM
### Response:
(Severity: 3), (Category: IP), (Description: The IPv4 IO process could not allocate memory needed to complete the specified operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. When the memory shortage is resolved retry the operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-INVMGR_MISS_SLICE_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The NP driver received slice_oper_up but not yet received slice_info), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_VRF_GLOBAL_CREATE_SUCCESS
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic network VRF has been created globally'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SNPTOOBIG
### Response:
(Severity: 4), (Category: ROUTING), (Description: L-LEVEL SNP size SNP-LENGTH bigger than interface INTERFACE-NAME MTU INTERFACE-MTR, trimmed to interface MTU This system was unable to flood an SNP out INTERFACE-NAME because the LSP MTU setting is too big for the interface MTU. The SNP packet size was trimmed to fit the interface MTU.), (Recommended Action: Configure the LSP MTU to a size that will fit within the interface MTU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER-4-INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialisation of one of the Ethernet capsulation processes. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then Ethernet services may be affected on all Ether type interfaces on the given node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-0-INIT_FAILURE
### Response:
(Severity: 0), (Category: MGBL), (Description: An error was encountered while initializing one of the critical modules of the configuration manager server. Without proper initialization of this module, configuration manager can not operate properly. Initialization will be retried every 60 seconds if required.), (Recommended Action: Configuration Manager is a critical component and must be operational in order to configure the router. Please note that if the probem is caused by a system resource shortage continued initilization of the module may repair the problem. If this error is seen more than 5 times, contact Cisco TAC support because a reboot of the node may be required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-MAJOR
### Response:
(Severity: 3), (Category: DIAG), (Description: A major error was detected if all the diagnostic test fail for the specified card.), (Recommended Action: Re-seat the card and retry the test. If the same result occurs after reseating the card and retrying the test, copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_HDR_FIFO_OFLOW_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg hdr fifo overflow on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPIDB-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A run time error occurred during the lc idb operation on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-CRYPTO_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: IKE found failure returned from encryption/decryption service.), (Recommended Action: 'Contact remote peer's administrator.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-IM_DMZLINK_BW
### Response:
(Severity: 3), (Category: ROUTING), (Description: BGP failed to register with interface manager for DMZ link bandwidth change notifiction for a given neighbor), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_CFEC_LOL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_IPC-3-NODE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates failure in getting the status of nodes for shutting it down.), (Recommended Action: Please collect the console log and CLI output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-7-INTERFACE_EVENT
### Response:
(Severity: 7), (Category: ROUTING), (Description: The static routing process received a change notification event from IM for an interface which it was not tracking.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_15_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_LIB-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is a debug message in the PLIM library driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: 'show logging' to confirm sysdb errors)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_PLU-1-PLU_RESMON_OOR_GREEN
### Response:
(Severity: 1), (Category: PLATFORM), (Description: PLU resmon on the node has detected that prefix usage is below the limit), (Recommended Action: Take immediate action to delete routes from the system so it does go into Out of resource condition)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_1_PKT_MAXLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on FIA to NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-6-MBIST_ENABLED_DEFAULT
### Response:
(Severity: 6), (Category: FABRIC), (Description: MBIST is enabled by default for this device.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-4-FIPS_MODE_MODIFIED
### Response:
(Severity: 4), (Category: SECURITY), (Description: 'Fips mode config has been applied. System reload is required.'), (Recommended Action: 'Reload the system post configuration of fips mode')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-SHOW_EDM_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Initialization for show EDM failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_15_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-6-CRC_ERROR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message received from Canbus Controller has CRC error computed. This is indicative of a low level serial device transmission error. In most cases, the message is fully recoverable automatically.), (Recommended Action: Provide the following CLI output: (admin)# show canb trace loc <target nodeid> (admin)# show canb server-stats loc all (admin)# show env volt Wait 5 minutes, again give CLI: (admin)# show env volt If the voltage output looks correct, then there is likely no negative impact from the CRC error. If the voltage output looks incorrect, wait 30 minutes and give the CLI command again. If the voltage output still looks incorrect, If this error occurs repetitively for a particular card, contact TAC for further evaluation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-GET_DETAILS_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CPP driver failed to get device details.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-4-CPU_LATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Errors observed on the system controller CPU module. A reason text will be supplied.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-7-TEJAS_GASPP_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The message is used to report info regarding Tejas gaspp register access), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-LOWMEM_SHUTDOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: BGP received a notification that CRITICAL low memory state has been entered, or that SEVERE low memory state has been entered while BGP is in READ-ONLY mode, and consequently it has shut itself down in order to free memory.), (Recommended Action: Check the memory on the node, and take steps to free memory or to correct the condition which caused the low memory state. Then restart the process using the 'process restart bpm location <node>' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_EA-3-SEND_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: A control message could not be sent from the EA to the MA. See error message for a possible reason. An interface may now be in the wrong up/down state.), (Recommended Action: Restarting the relevant SVI Manager process will prompt a resync, which should re-send the lost message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-7-ENS_MULTIPLE_PUBLISHERS
### Response:
(Severity: 7), (Category: OS), (Description: ENS supports single publisher multiple consumer model. There can be only one publisher per class-data handle. If ENS detects that more than one ENS client is trying to become publisher on a given handle, it prints above message. It shows both existing producer and new producer. Triage case need to be logged on producer process component.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-CALIBRATION_DATA_SET_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Linecard device calibration data set failed. It is applicable for Digi 20x10g and 2x100g Digi cpak cards.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-ISSUMGR_MILESTONE_ERR_RC
### Response:
(Severity: 3), (Category: ROUTING), (Description: An external software error was returned form issu mgr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The issu milestone update API for milestone start/met has returned error. This may be transient error and the API will be retried. If repeated, please collect the output of the following commands: - show tech-support routing ospf - show tech-support issu)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-COMMS_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A error occurred in the communication between Frequency Synchronization processes. Frequency Synchronization information may be out of sync.), (Recommended Action: Restarting fsyncmgr on the card on which this message was seen may fix the problem. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Secure Domain Router (SDR) feature in Cisco IOS XR?
### Response:
The Secure Domain Router (SDR) feature allows partitioning a single physical router into multiple logical routers. Each SDR has its own set of resources (routes, interfaces, protocols etc.) that are isolated from other SDRs. This provides fault isolation, improved security, and the ability to host multiple tenants on the same physical router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-SHM_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to initialize shared memory. This error could occur for two reasons. 1. The system is low on resources. 2. A hardware or software error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ATM_V2-3-LTRACE_INIT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: SPA process encountered an error during software initialization. ltrace initialization is failed. so we will not get any traces using ltrace cli. It may fail very rarely. It will work most of the time. we added this message only for debugging purpose.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-PARSER_UNAVAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: shell_parser_init() failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-MSG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while handling messages received by tacacsd.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-TIMER_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: This error indicates that a timer initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-1-HSSD_SIZE_MISMATCH
### Response:
(Severity: 1), (Category: PKT_INFRA), (Description: This error indicates that a code sanity check has failed. This indicates the size of the global HSSD area defined in Pakman does not match the size that NetIO is expecting.), (Recommended Action: NetIO will not start properly until the code is fixed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SATORI-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational Satori RP Kensho-JF CPU Subsystem DLL message.), (Recommended Action: Nothing. Reporting normal progress of Satori RP Kensho-JF CPU Subsystem DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_CHKPT_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-MUTEX_UNLOCK
### Response:
(Severity: 3), (Category: OS), (Description: Failed to unlock the mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-DB_INCONSISTENT
### Response:
(Severity: 3), (Category: L2), (Description: An internal inconsistency was identified while performing some operation on the database. The process will attempt to recover a consistent state, and should be able to continue operating. It is possible that some parts of the dataplane may become out of sync.), (Recommended Action: If additional problems are observed then restarting the process may help to restore the system to a consistent state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-3-SRC_PORT_EXCEEDED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Number of source exceeds supported scale.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-ERR_CLIENT_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabricq Manager client Registration/Unregistration error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-RECOVER_BACKUP_BIOS_BOOT
### Response:
(Severity: 3), (Category: DRIVER), (Description: The device is detected to be booted from backup BIOS. Backup BIOS is only to debug the problem with the main BIOS but system can't run with it properly. Hence, we are triggering recovery after collecting the necessary logs.), (Recommended Action: Once the device is stable post recovery, please collect the logs from /misc/disk1/log directory in admin prompt. 1. Copy the log collected in /misc/disk1/log directory in admin prompt 2. show tech card-mgr 3. show tech ctrace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BLWM-4-BATCHED_REPLY_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: A BLWM-enabled server encountered a failure while sending batched replies to the client. The client might have restarted. Wait for the client to restart and reconnect to server to resume the processing.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CHKSUM_ERR_1_FIA_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checksum error - 1 from FIA on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-TABLE_DELINK
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected that a table_ctx is being deleted even though it is in active state), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-4-RLIMIT
### Response:
(Severity: 4), (Category: HA), (Description: Process reached RLIMIT_DATA. SIGXFSZ recieved.), (Recommended Action: Gracefully restart the process. If not restarted, process will get SIGSEGV at 100% RLIMIT_DATA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-Tx_GET_BUFFER_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Could not get bfm buffer for Tx direction. %d- Size of buffer requested), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-BAD_TOTALSIZE
### Response:
(Severity: 7), (Category: HA), (Description: The message header totalsize value must be equal to the source message length. If not, this indicates an IPC or coding error.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-MEMORY_LIMIT_EXCEEDED
### Response:
(Severity: 4), (Category: HA), (Description: The process with the indicated name and pid has allocated more memory than its memory limit allows. The process will be restarted.), (Recommended Action: The system will collect data about the process before it is killed. Collect this data and forward it to technical support. Most likely, there is a memory leak in the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LWMESS-7-INVALID_MSG_ERROR_CODE
### Response:
(Severity: 7), (Category: OS), (Description: The msg_error error codes are limited to errno values. Any error values with high bits set (such as -1) are invalid.), (Recommended Action: Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-BOARD_SIH_ACTION_RELOAD
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver requested for LC Reload), (Recommended Action: RMA the LC ,if you see this error on every reload. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-BAD_DBDUMP_MESSAGE
### Response:
(Severity: 3), (Category: OS), (Description: The indicated error occured while processing a dbdump from another node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-SYSDB_UNBIND
### Response:
(Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to unbind from SysDB. Despite this, subsequent operation is unlikely to be affected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-7-SERVER_ROUTING_DEPTH
### Response:
(Severity: 7), (Category: ROUTING), (Description: Recursive route lookup for resolving the prefix has exceeded the maximum recursion depth allowed(possibly because of a routing loop).), (Recommended Action: To further debug/troubleshoot this state use commands like 'show route' and 'show route resolving-next-hop' recursively to resolve the prefix manually, notice if there are any loops indeed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure MTU size for an L2VPN xconnect?
### Response:
To configure MTU size for an L2VPN xconnect, use the 'mtu' command within the interface configuration mode. interface GigabitEthernet0/0/0
mtu 1500
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCAM_MGR_LIB-6-V6_CMPR_FAILED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: V6 source prefix compression failed due to lack of extended path. This failure indicates that a particular v6 prefix indicated in the message will not be compressed. There are 3 workarounds of this problem. 1) do not use this entry. 2) change the prefix length. 3) change the prefix value. For example if an entry failed. 4) use the compression anchor prefix cli controller pse tcam location R/S/I compression ipv6 anchor-prefix to configure the common IPv6 prefix lengths during an ACL programming then try removing that ACE indicated in the message and apply the configuration again. *DDTS*), (Recommended Action: Ouput generated by this message and related config, for example v6 ACL failed in case of ACL configuration. Attach them to the ddts. This failure indicates that a particular v6 prefix indicated in the message will not be compressed. There are 3 workarounds of this problem. 1) do not use this entry. 2) change the prefix length. 3) change the prefix value. For example if an entry failed during an ACL programming then try removing that ACE indicated in the message and apply the configuration again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-VOQ_PROCESSING_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: Unable to program one or more VoQs with the queueing parameters received for a remote interface. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-4-NOTIF_DELIVERY_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An IM notification failed to be delivered to one of its clients. The most likely reason for this is an out-of-memory condition. This will have left that client out-of-sync with IM.), (Recommended Action: Check if the system is in a low-memory condition, and if so attempt to rectify this. Restart the ifmgr process on the affect node to attempt to bring it's clients back in-sync. If this doesn't help, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_WRITE_BFD
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods write encountered error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_PROXY-3-SHM
### Response:
(Severity: 3), (Category: L3), (Description: An internal software error occurred that prevented Route proxy from working properly with shared memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_DEBUG
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error using the debug service. The error message describes what operation has failed and why it failed. The error could be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPPoE MA will recover by itself. If it does not then restarting the process may help. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_MSGQ_RR_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver failed to create a message queue used for inter-thread communication during the driver initialization.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE_CLIENT-3-TRACE_BUFFER_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The PCI/PCIe client was not able to initialize the trace buffer. The message has more details.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_VM_INTR_AB_REQ_TOUT_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_VM_INTR_AB_REQ_TOUT_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD_LIB-3-PREFIX_LIST_CFG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The prefix list configured for Prefix monitoring errored. Retry after sometime.), (Recommended Action: The Prefix List component has some problem to initialize. Unconfigure the prefix list and retry after sometime.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VI_REPL-4-REPLICATOR_MSG
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: VICR replica received a message that was not in the expected format. This message is to replicate virtual interface configuration to the standby RP in case of failover.), (Recommended Action: VICR replica has received an incorrectly formatted message. This message is to replicate virtual interface configuration to the standby RP in case of failover. However, when this error occurs, the update message will get retried, so it is possible that this error will correct itself. In any case, there would be no problems unless an RP failover actually happens. If this error is seen repeatedly, restart VICR processes on the active and standby RPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_PORT_1_SENDING_AIS
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When no external clock source is available, this status propagates to BITS output ports in T1 and E1 modes. When an external source is qualified, this alarm will be cleared.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_DSC_SWITCHOVER
### Response:
(Severity: 6), (Category: INSTALL), (Description: The ISSUMgr is doing dSC node switchover as part of the ISSU operation. This is expected in the RUN phase of ISSU operation and is not an error condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-0-CPU_FIVR_FAULT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Indicates THERMTRIP was signaled due to an internal error with the integrated voltage regulator rather than an over temperature condition. Must be qualified with THERMTRIP_L assertion. This is a very low level fault, and the processor will not be running when this fault occurs. This error message is thrown after observing error with the integrated voltage regulator.), (Recommended Action: Reload the LC that has the problem. If problem persists, contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_LANE_REPAIR_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates possible fault with the NP HBM memory. Displays the error associated with the Lane repair operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-INTERFACE_CHANGE_FAILURE
### Response:
(Severity: 4), (Category: MGBL), (Description: While updating the Central Config Validator's (CCV) inventory, CCV detected that it held invalid information about an interface. In order to recover, CCV will restart.), (Recommended Action: The cause of the condition resulting in incorrect information held by CCV should be investigated, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_NO_DIGESTINDEX_VALUE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-ILLEGAL_THREAD
### Response:
(Severity: 3), (Category: MGBL), (Description: internal data structure is in inconsistant state because of an error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_DETAILS
### Response:
(Severity: 3), (Category: SECURITY), (Description: Client address, error, error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_BURN_LANE_REPAIR_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates possible fault with the NP HBM memory. Displays the error associated with the burn lane repair operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-PARK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message indicates the i2c mux is not disabled properly before card reload.), (Recommended Action: If there i2c related error msg seen after these errors and card fails to boot, its recommended to do HARD OIR on the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-TIMEOUT
### Response:
(Severity: 7), (Category: SYSDB), (Description: A request timed out before SysDB MC received the expected number of replies), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-PROT_SERVER_INIT_SUCCESS
### Response:
(Severity: 6), (Category: L2), (Description: After failing to initialize itself as PFI fast protect server, PROT_SERVER_BFD, once or more, BFD was able to successfully complete initialization.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT-7-BTREE_INSERT
### Response:
(Severity: 7), (Category: OS), (Description: The internal message storage space optimizer failed to insert the string being stored. This is not a critical, since the string will still be stored, however it does possibly indicate a lower level memory corruption or other problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-4-ACCT_TIMEOUT_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Failed to send an accounting record to RADIUS or TACACS+ server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-BADSHARE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred. Resources may be in inconsistent state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTU1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-ERR_STR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error information in PLATFORM FIB HAL), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show logging, show version, show platform, show install active, show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-ISA_DEVICE_CLIENT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HPI isa device client failed with below error type. %s-Error type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-ERR_DB_BATCH_END
### Response:
(Severity: 4), (Category: L2), (Description: Errors have been seen while attempting to save updates after processing a batch of operations. The process is restarting to recover from the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_PATH_OPTION
### Response:
(Severity: 5), (Category: ROUTING), (Description: Path-option index changed for the specified tunnel, destination and LSP.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-BIOS_WARNING_EVENT
### Response:
(Severity: 4), (Category: DRIVER), (Description: BIOS has reported a warning event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACL_TTL_MATCH_NOT_SUPPORTED_ON_EGRESS
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL TTL/Hop-limit match qualifier is not supported on egress direction.), (Recommended Action: Remove the criteria to match on ttl value from ACE definition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_PM_LIVENESS_SESSION_STATE_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: PM liveness session state has changed for a particular LSP.), (Recommended Action: None. This is a solicited message (by 'performance-measurement delay-measurement logging liveness-detection session-state-change' \ policy configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TEMPERATURE_ALARM-3-DIE_OVERTEMP_SHUTDOWN_COUNT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: LC or port shutdown is schedulded if the temperature value stays above the critical thresold for 24 hrs or more), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, LC or port will shutdown. Call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_SETSOCKOPT
### Response:
(Severity: 4), (Category: L2), (Description: While creating a TCP socket, SSRP failed to set the correct options on the socket. This socket will now not be established correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider restarting the PPP MA process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_COMM_DRVR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The SFE common infra driver was unable to allocate memory. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_DM_INTR_FIFO_URUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_DM_INTR_FIFO_URUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-4-SERV_APP_INT_DEL
### Response:
(Severity: 4), (Category: SERVICES), (Description: MAPT Domain is tightly coupled with Service Apps.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-4-ASYNC_HANDLER
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN MA process couldn't install the default event handler for async msgs.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-ERR_INFO_VERBOSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE-3-ERR_SHMEM_MMAP_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to mmap the shared memory fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-4-STBY_NOT_SUPPORTED
### Response:
(Severity: 4), (Category: ROUTING), (Description: clear command is not supported on standby), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-MAC_LIMIT_PW_CLEAR
### Response:
(Severity: 6), (Category: L2), (Description: Number of MAC addresses in the pseudowire has gone below the threshold of the configured maximum. If MAC learning or/and unicast flooding was disabled on the port due to MAC limit action, then it would get re-enabled automatically.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-THREAD_CNT_NORMAL
### Response:
(Severity: 3), (Category: HA), (Description: When number of threads are below MINOR Threshold Percentage), (Recommended Action: Not required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt link failed), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-6-MPA_POWERED_ON
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Power-up MPA command received.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_TX_FIFO_OFLOW_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-0 reported tx fifo overflow on bridge instance - 3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_1_TX_DISABLE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: On the standby RSP, BITS outputs are disabled. This prevents the sync 1 transmitters on RSP0 and RSP1 from interfering with one another when a Y-cable is installed.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-ERR_TABLE_RESIZE
### Response:
(Severity: 4), (Category: L2), (Description: CDP ran out of memory when trying to resize the CDP hash table.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. CDP will try and continue to use the previous CDP table.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFC_WATCHDOG-5-SHUTDOWN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Priority Flow Control (PFC) packets have been continually received and the queue has stopped for the given shutdown interval. The PFC watchdog has now shutdown this queue from sending traffic.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-CLIENT_FAILURE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information %s - describes the function that failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DATABASE-7-INTERNAL
### Response:
(Severity: 7), (Category: SUBSCRIBER), (Description: An unexpected internal error occurred in the configuration subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTDIR_INVENTORY-7-LTRACE_INIT
### Response:
(Severity: 7), (Category: INSTALL), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_MFWD_FRETTA-3-ERR_MAX_EG_STATS
### Response:
(Severity: 3), (Category: ROUTING), (Description: Egress stats scale has gone beyond scale limitation and further routes programmed or multicast enabled interfaces will not be able to show stats. Forwarding will keep working.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FT-3-FAN_IDPROM_ACCESS_FAILED
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The type of fan IDPROM is either not supported or not programmed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-3-TX_BUFF_CRITICAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ethernet server is performing a periodic self test to ensure that sufficient transmit buffers are available at any given time. This error msg means that the test failed and available transmit buffers has gone below 512. Eth server will correct the condition by restarting itself and operator needs to do nothing.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-FAIL_DLL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failure to load the DLL in Inventory Manager dllmain function call), (Recommended Action: This will auto recover. No action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-VLK_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PHY controller driver version is not compatible with PHY controller hardware version.), (Recommended Action: Upgrade the PHY controller CPLD image using the FPD procedure, followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the nsf cisco command in IS-IS?
### Response:
The nsf cisco command is used to enable Cisco-proprietary Non-Stop Forwarding (NSF) for IS-IS. NSF allows the router to continue forwarding traffic during a supervisor switchover or a software upgrade. It requires the router to maintain its forwarding table and to synchronize its database with neighboring routers after the switchover or upgrade.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_SYSMGR_READY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-DEVICE_DISABLED
### Response:
(Severity: 4), (Category: OS), (Description: A device is disabled for logging onboard by user configuration.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-CHASSIS_SHUTDOWN
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The chassis is being shut down for the given reason), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-SWITCH_OFFLINE
### Response:
(Severity: 6), (Category: INFRA), (Description: Inidicates that the switch has gone offline. This could be due to a fault or a card being removed.), (Recommended Action: Determine if the event was user initiated. If not, the root cause of the switch going offline needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-6-REBOOT_STARTED
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message that reboot library initiated reboot), (Recommended Action: None No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-ASIC_PLL_LOCK_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that ASICS(except beluga) PLL LOCK failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_SPP-3-ERR_QUEUE_ELEMENT_SIZE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HFR SPP Invalid Queue Element Size Error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-FPGA_OPTICS_SERDES_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Tx serdes fault detected/cleared on port), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-MEM_ALLOC
### Response:
(Severity: 4), (Category: OS), (Description: Memory running low), (Recommended Action: Reboot the router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-NUM_PART_INVALID
### Response:
(Severity: 3), (Category: OS), (Description: The number or parts of a packet are greater that the max IOV parts defined %d- Number of packets of the packet being read %d- Maximum number of parts allowed (max IOV parts value)), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-5-MSGREPLY_FAILED
### Response:
(Severity: 5), (Category: HA), (Description: msg_reply API failed .), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-3-CONN_DOWN
### Response:
(Severity: 3), (Category: IP), (Description: The DPM/IEDGE connection is down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-3-SOCKET_SEND
### Response:
(Severity: 3), (Category: L2), (Description: Socket returned an error, other than 'resource not available or, temporary interrupt detection. Sending on socket to the interface will fail.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE7_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE7_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_REGISTER_HANDLER
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal error occured while registering async handler.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-3-ERROR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-4-OVS_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: OVS reported a warning. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SYSDB_API_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SysDB operation error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_MA-3-INIT
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: Initialization of an internal module, such as debug, failed. This message is normally seen when the acct_ma process is starting. The acct_ma process cannot proceed without this module initialization, and will exit.), (Recommended Action: The sysmgr will retry to start the acct_ma process. If it cannot be restarted it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-6-CARD_ROLE_CHANGE
### Response:
(Severity: 6), (Category: OS), (Description: Based on the card configuration the role of this card has changed. The text of the message displays more informationi about the change. 'show svd role' would provide a summary of AFI specific card roles.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-PORT_CONTROL_DISABLE_SUCCESS
### Response:
(Severity: 5), (Category: L2), (Description: Port Control is disabled on the interface.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What does the 'comp' component in an IOS XR filename indicate?
### Response:
The 'comp' component in an IOS XR filename indicates that the file is a composite of multiple packages, for example comp-hfr-mini.vm-3.6.0.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-MAP_SERVER_REACHABILITY_CHANGE
### Response:
(Severity: 5), (Category: IP), (Description: 'No route to reach map-server so local EID database ' 'prefix will not get registered.'), (Recommended Action: 'Ensure ETR has connectivity to map-server.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-4-CONFIG_CFM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Ethernet OAM CCMs are configured for an Layer 2 VPN interface over an unsupported pseudowire encapsulation.), (Recommended Action: Ethernet OAM CCMs upward MEP/MIP configuration is not supported for VPLS/L2TPv3 based L2VPN Attachment Circuits. Please review ethernet CFM configuration attached to the L2VPN interfaces and remove the unsupported Ethernet CFM upward MEP/MIP configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_QS_LOAD_DONE
### Response:
(Severity: 1), (Category: INSTALL), (Description: The Quickstart Load operation has completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5345_PLL_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5345 PLL loss of lock fault detected/cleared), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_TS_UPDATE_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Timestamp update error on NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_1_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERR_EEPROM_READ
### Response:
(Severity: 3), (Category: PLATFORM), (Description: EEPROM/NVRAM read failed for a chassis, card, or SPA. Inventory information would be incomplete. This would affect information provided to CLI 'show inventory', inventory schema, and the entity related MIBs. %s - indicates the internal error string %d - indicates the internal error code), (Recommended Action: Check the card/chassis/SPA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-RX_CH_LO_PWR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low power on a channel. This is a precursor to Rx LOS errors in the channel. The link is now marginal, and the superstar Rx link may be seeing correctable errors. Although the link is still working, it is marginal and can become inoperational in due course. This is also likely due to contaminates in the optical cable and/or connector. Please check if the optical cable and/or connector are secured, and clean the components as necessary.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-MI_WEDGE
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq ASIC encountered a MI Unicast/Multicast Wedge error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-ERR_INVALID_GROUP
### Response:
(Severity: 3), (Category: SECURITY), (Description: AAA failed to recognize the specified server group name. It may be undefined.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTIO-4-CTX_SHORTAGE
### Response:
(Severity: 4), (Category: L2), (Description: Set: A global SPP context shortage was detected in the VTIO plug-in. Reception of packets from ports and other nodes is likely to stop at any point. Clear: A previous SPP context shortage was cleared. Normal packet I/O operations will resume.), (Recommended Action: If the problem does not clear, the node should be reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-5-EVC_IGNORED
### Response:
(Severity: 5), (Category: L2), (Description: The E-LMI protocol can report at most 65535 EVCs per interface. Subinterfaces with numbers above this value are not reported to the peer device.), (Recommended Action: Re-configure the subinterface to use a subinterface number of 65535 or below.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show mpls ldp neighbor' command in IOS XR?
### Response:
The 'show mpls ldp neighbor' command is used to display information about the LDP neighbors. It shows the neighbor ID, the transport address used to establish the LDP session, the state of the session, the role (active or passive), and the duration of the session.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-LINK_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. For Link in error state : This link is in error state due to errors on the link.), (Recommended Action: Reset the link. In most cases after reset of the link it should come UP fine. Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. show controller sfe link-info rx 0 127 topo instance all loc <loc> 2. Collect all traces:'show controller sfe trace all location <loc>' 3. Collect DSC and eyescan data for this link and also for the far end link If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-MDR_RECOVERY
### Response:
(Severity: 3), (Category: OS), (Description: SSM process tried to recover service by calling sysmgr_start_mdr and and encountered an error. Collect sysmgr traces and check state of the process specified by pid.), (Recommended Action: Collect system logs. For mentioned pid collect show process <pid> and follow process <pid>. Collect show process blocked and show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-INFRA_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-4-PCIE_BUS_RESCAN_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The Ethernet Switch Driver attempts to perform a PCIe bus rescan when the driver starts. This is done in order to guarantee that the Ethernet Switch is visible in the Linux host kernel after the switch was reset for error recovery or was powered up for the first time. This call is not expected to fail.), (Recommended Action: No action is required from the operator. This error is likely to be a very rare event, and in case it does happen, a higher level recovery function in the driver kicks in and will restart the driver or the card if neccessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_EVENT_OPEN
### Response:
(Severity: 7), (Category: OS), (Description: Event Conn Open failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-SHM_OPEN_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: SSM tried to create shared memory region but failed. It will exit with failure status.), (Recommended Action: Collect system logs and show tech ssm. Collect show memory summary. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Configuration Manager in IOS XR?
### Response:
The Configuration Manager in IOS XR is responsible for processing configuration commands entered by the user, validating the commands, and applying the configuration to the relevant processes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-OBJ_NOT_FOUND
### Response:
(Severity: 7), (Category: HA), (Description: The object could not be found in the given table when attempting to map the object ID to a memory address.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-3-DRIFT_UPDATE_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred during clock drift checkpoint handling. The string tells the points of process that error has occurred. The integer specifies the error for internal usage.), (Recommended Action: Reduce the memory usage. If the problem still occurs, contact TACS/SUPPORTS and pass the memory usage, ltrace, and configuration of NTP to them such as - show memory - show ntp trace ... - show running-config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-IMPLICIT_EXPIRED
### Response:
(Severity: 4), (Category: LICENSE), (Description: The period after initial boot during which licensed features can be used without licenses has ended. Licensed features without licenses will cease to operate and cannot be configured. The message will appear even if there are no licensed features configured without licenses at the time.), (Recommended Action: In order to use licensed features, obtain a license and install it using the 'license add' command in admin mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-2-ERR_PLANE_FAILURE_NOTIFY
### Response:
(Severity: 2), (Category: DIAG), (Description: The diagnostic test has detected an error on a fabric plane but failed to notify the fabric management process to take the plane out of service.), (Recommended Action: 1) Get the output from the following commands: admin show logging admin show control fabric trace fsdb-server fsdb-all location <dsc node> admin show diagnostic result location <node that printed out this msg> detail admin show diagnostic trace error location all admin show diagnostic trace message location all 2) shut down the identified faulty plane in admin configuration: controller fabric plane <> shutdown Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_PAK_FSV_REGISTRATION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Internal Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_INVMGR-6-OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Fantray or Powertray entity is removed from the satellite.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-MACSEC_MODE_CFG_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: L2), (Description: 1. config not supported on this node. If specifically configured for this LC Remove this config using command, 'no hw-module macsec-mode location <>'), (Recommended Action: Remove config using 'no hw-module macsec-mode location <>.If specifically configured for this LC. Else no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-6-PROC_ID
### Response:
(Severity: 6), (Category: OS), (Description: Process ID is displayed), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-4-ERR_INTERNAL_WARN
### Response:
(Severity: 4), (Category: L2), (Description: BFD Agent encountered a minor internal software error. It is possible that BFD Agent operates normally without any issues.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-KERNEL_CRASHED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_4P_OC192-3-DEVICE_INTR_DISABLE
### Response:
(Severity: 3), (Category: L2), (Description: The specified device is generating excessive interrupts. This message indicates that we are rate limiting the interrupt coming from this device. This indicates a potential HW issue, traffic forwarding (protection switching) may be impacted.), (Recommended Action: Check the fiber or the peer connection. If the problem persist after checking fiber and peer router, please contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NETIO_LIB-4-FINT_IDB_NOT_FOUND
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The FINT idb is not yet created in netio. This could be a transient condition.), (Recommended Action: Please capture the following information and check if FINT is created in one of the outputs on the node. If so, it was a transient error. show netio trace all loc <> sh netio idb FINT loc <> sh im trace interface-existence loc <> Else, please capture the following information and if traffic loss also is being observed Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked sh im trace loc <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-SPA_SMLIB_CLIENT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failed to get Shim Header Information due one of the following reasons: 1. Invalid Arguments passed to function 2. Shared Memory not yet initialized 3. Mutex Access Error 4. Information pertaining to given handle not found), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-ERR_ASIC_SN_LINK
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq, cpuctrl net interface Rx FIFO last sync.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_NOTIFICATION_UNREGISTER
### Response:
(Severity: 7), (Category: INSTALL), (Description: The notification services from the system database failed to shut down. This will not have any adverse effect on the running of the box.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-PROCHOT_INTR_DISABLE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCH Prochot intr disable failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-3-MGR_INIT_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: An error occurred during initialization, causing SERG Manager process to abort and it will be restarted to attempt to resolve the issue.), (Recommended Action: Contact Technical Support. No impact on ongoing feature operations, but if happens repeatedly then Session Redundancy related configuration cannot be updated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_FMI_INFO_UPDATE
### Response:
(Severity: 4), (Category: SECURITY), (Description: The Firewall Controller has been informed of the creation of a Firewall Management Interface that already exists, or has received an update about a Firewall Management Interface that does not exist. This error message indicates an inconsistency in the firewall database, which may result in unexpected behaviour.), (Recommended Action: If this message is seen and the state of firewalls on the router does not match the expected state as a result of configuration, restart the Firewall Controller process using the 'process restart' mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-2-RX_FAULT
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM received an Rx fault on the given interface which will result in a link flap.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-ASYNC_ATTACH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to attach async message handler. An handler is not being setup for receving all asynchronous messages. This involves exiting the upgrade_fpd or lc_upgrade_fpd process.), (Recommended Action: First try to restart the process ( upgrade_fpd or lc_upgrade_fpd) and check if the problem is recovered. If not do a switchover of RP or reboot the router either manually or via Command line. If that too fails call Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_SYSDB_BIND
### Response:
(Severity: 7), (Category: OS), (Description: Sysdb bind failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-MUTEX_INIT_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'while initializing shared memory to store AIB updates.' 'Mutex initialization failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAP_LISTEN-3-SYSDB_REGISTRATION_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: This message can occur when the SAP has trouble registering as a notifier with SysDB. This can be registration or verification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sap trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sap trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes sap_listen error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes sap_listen error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show context<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show context<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. from the node obtained from the above command, run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sysdb trace edm <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sysdb trace edm <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MBR_BFD_SESSION_DOWN
### Response:
(Severity: 5), (Category: L2), (Description: There are 3 possible reasons for the BFD session to time out: - the session did not transition to state UP within the given time period after initial start-up. - the BFD session transitioned to state DOWN. - the BFD session timed out after receiving a message indicating that the neighbor's BFD session was unconfigured.), (Recommended Action: Ensure that the bundle and its members are configured correctly on the neighboring router, and that all the interfaces are up. Ensure that BFD is running on the member interfaces on the neighboring router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_CLOCK
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error whilst retrieving the value of the realtime clock. The error message includes details of the reason for the error. This is a fatal error and the PPP MA process will abort and be restarted to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON-3-UNEXPECTED_EXIT
### Response:
(Severity: 3), (Category: INFRA), (Description: Watchdog monitoring service exited unexpectedly. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-TRANSPORTIO
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to communicate with the SNMP transport process. This could be due to a low memory condition or failed to initialize incommingQ or overload control, or the fact that there is no SNMP transport process (udp) running.), (Recommended Action: Check the running processes to ensure that an udp process is running. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-QDD_FPD_FW_UPGRADE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: QDD ZR FPD firmware upgrade failed. Please try after some time.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-CARD_POWER_UNKNOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Power to be allotted for the given is unknown. Assuming 123 W.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-BOOT_DEVICE_FAILURE
### Response:
(Severity: 6), (Category: OS), (Description: Failed to determine the boot device for a RP), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_DRV-3-ERR__VERSION_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in platform component,during version info initialization), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTP-3-INIT_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while starting up SCTP process. SCTP process will restart in an attempt to recover), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSP_B_PKT_FRAME_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TSP decoder B frame error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_LWM_SEND
### Response:
(Severity: 7), (Category: HA), (Description: The msg_send function reported an error trying to send a message to the specified process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-SOCKET_PARSE_PATH
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS was unable to extract the xipc & job id from the socket path. This might cause communication problems between ISIS and CLNS.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
action-3-RESET_MSG
### Response:
(Severity: 3), (Category: OS), (Description: This is a test message for action->reset message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TP_SW-3-TP_LXC_RESTART_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that TP-LXC failed to restart), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_8_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP session hold time?
### Response:
To configure the LDP session hold time, use the 'session holdtime' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#session holdtime 180
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-NOTNBRTYPE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Neighbor address cannot be configured on interface if it is not type NBMA or point to multipoint.), (Recommended Action: Correct the configuration of the network type on the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FAIL_THREAD_CREATE
### Response:
(Severity: 4), (Category: INSTALL), (Description: The Install Helper failed to create a thread.), (Recommended Action: This error will be recovered automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_ASIC_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while initializing the CPU control ASIC to either receive packets from the fabricq ASIC or transmit packets from the ingressq ASIC. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If problem either persists (following a process restart) then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-7-ERR_INTERNAL_SW
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver encountered the annunciated internal SW error. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWTECH-1-ALERT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-TUPLE_UNPACK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'This error will happen if parser can not unpack interface encap ' 'info from sysdb. This information is published in sysdb by ifmgr ' 'As a result parser may not be able to parse subinterfaces for ' 'interface mentioned in the error message. Usually this error could ' 'happen in the low memory condition. If this happens analyse the low ' 'memory situation and once solved, restart parser_server'.), (Recommended Action: This error can only happen in the low memory condition. Collect the error message, show logging output, show interface brief output and show it to tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-SELFMANAGE_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: NetIO was attempting a hitless upgrade of a DLL that was part of a SMU/PIE. A step during this operation encountered this error. Netio may or may not be able to perform the DLL upgrade successfully when this error is encountered.), (Recommended Action: If the DLL upgrade is successful, no further action is needed. Otherwise it is recommended that netio is restarted, to recover from an inconsistent DLL upgrade state in NetIO. Restart of netio should lead to the new DLL take effect and bring back things to normal.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-3-THREADPOOL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that there is a failure in the invmgr process which creates a thread pool to handle items in the queue. The failure may be in event creation/queuing or handling in the thread.), (Recommended Action: The invmgr process exits and tries to comeup automatically. If the failure is not cleared, cisco support is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_MPLS_EA-3-ERRSTR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE MPLS-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-MUNMAP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition, the munmap failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin <win_id> participant list - show memory <jib of process> location 0/x/CPUx - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_PCIE-4-PCIE_AER_DETECTED
### Response:
(Severity: 4), (Category: LIB), (Description: AER infrastructure reports fatal and non-fatal errors or faults on device. This error can be considered as a warning and the system will recover from it. The header info provides the corresponding count of the errors occured so far and other header information for further analysis.), (Recommended Action: The system should recover automatically)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ARP_REGISTRATION_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: ISIS was unable to register with ARP to preload IPv4 mac address resolutions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-MSGREPLY_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Could not reply to client. This will impact behavior of dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering auto-tunnel mesh feature?
### Response:
The MPLS traffic engineering auto-tunnel mesh feature allows a full mesh of MPLS TE tunnels to be created dynamically between a set of routers. It significantly reduces the configuration needed compared to manually configuring a full mesh. It is enabled with the mpls traffic-eng auto-tunnel mesh command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-0-TX_PLL_NOT_LOCKED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: TX PLL inside the FPGA device is not locked.), (Recommended Action: The software is not able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-P2P_CONFIG_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: Any level specific configuration on a P2P interface is ignored. The configuration may be accepted but not used if the interface type is unknown or changed later to point-to-point.), (Recommended Action: Configure the same parameter without using any level extension.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-LABEL_ALLOCATION_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: During process startup ISIS was not able to allocate one or more Segment Routing MPLS SIDs in the allotted time.), (Recommended Action: Verify that the SRGB range is free. If it is not modify the 'mpls label range' configuration to reserve space for the SRGB and reload the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-3-NO_CONFIG_MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: Insufficient memory was available for storing the IFIB flow handling configuration. Default characteristics will be used for all packets.), (Recommended Action: Provide the following log: Collect Console logs and output of -show memory summary -show memory heap summary all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-PASSWORD_FILE_PERMISSION
### Response:
(Severity: 3), (Category: MGBL), (Description: This error comes when there is issue with spawning the bash, bash shell itself is not present), (Recommended Action: The issue should be recovered when retrying login, if this message keeps on coming please collect required log)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-3-TRANSPORT_STATS_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicated DSC fails to initialize the Statistics for transport media. Statistics help basically for debugging purpose. DSC will retry to initialize the Statistics multiple times before it quits), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IXDB-3-MUTEX_ERROR
### Response:
(Severity: 3), (Category: SYSDB), (Description: There was an internal error during Mutex initialisation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_RSYNC
### Response:
(Severity: 3), (Category: MGBL), (Description: See the man page of rsync for further detail on these errors. Some of these may be fixable/transient, and others might point to a deeper issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-4-UNKNOWN_INTF
### Response:
(Severity: 4), (Category: L2), (Description: The system must be sending messages we didn't register for. They will be ignored.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_DISCOVERY_TIMEOUT
### Response:
(Severity: 6), (Category: L2), (Description: Discovery mode has been ongoing for the configured timeout, but no suitable response has been received from the remote peer.), (Recommended Action: Ensure the remote OAM peer is correctly configured and that the link is up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_NETIO-6-DEBUG_REG
### Response:
(Severity: 6), (Category: L2), (Description: Debug message registration failed. This will not leave much impact on the functionality, this is just an info to the user that no debugging will be available for the ATM NetIO dll.), (Recommended Action: This happens to be a rare case, if the message persists across every recreate, the memory conditions should be checked at the node)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-MISC_L3_WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Exceptionally handle create/modify/delete.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-CORRUPT
### Response:
(Severity: 3), (Category: MEDIA), (Description: Corrupt nvram detected while trying to do an operation.), (Recommended Action: Collect console logs and 'show nvram trace' 'Format nvram')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM_API_LIB-2-CLIENT_DATA_QUEUE_FULL
### Response:
(Severity: 2), (Category: ROUTING), (Description: The PM and the client inter-process message queue is full and further messages cannot be accepted. This may impact PM functionality if the condition persists.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-TCAM_LIMIT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This message will typically occur when permissible single region size is exceeded or total number of entries allowed in TCAM for a given application is exceeded.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTSDRVR-6-OTS_HWMOD_EXEC_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates an HWMODULE action), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-3-NOTIFICATION_NOT_PRESENT
### Response:
(Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV4PROTO-6-PAKHDR_ERROR
### Response:
(Severity: 6), (Category: IP), (Description: There was a problem with reading the IP header in the packet, so, can't process it.), (Recommended Action: Do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR0_INTR_SHORTKT_DROP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR0_INTR_SHORTKT_DROP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-BUS_ERROR_THRESHOLD_EXCEEDED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOS_PORTP
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ENV
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Could not update environment variables due to the error'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_0_XAUI_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error - 0 from XAUI on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-3-SPABUS3_PARITY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a Parity Error on SPA Bus for SPA2 (SPA Bridge0) or SPA3 (SPA Bridge1).), (Recommended Action: Remove the SPA. Examine the SIP bay and the SPA connector pins for damages. If no damage found reinsert the SPA. If the problem persists, call tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-3-NP_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PRM error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support l2vpn<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support l2vpn<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-3-CERR_REGISTER_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-MAX_SERVER_PVT
### Response:
(Severity: 6), (Category: SECURITY), (Description: Configuration Warning.), (Recommended Action: Please reconfigure based on the recommended values.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-FSTAT_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition, a fstat call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin trace all location 0/x/CPUx - Check that the path exists with 'run ls -l <pathname>' from the shell)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-2-FIRMWARE_UPGRADE_PWR_V3_POWEREDOFF
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'power module firmware upgrade with out power feed cable makes incosistent firware upgrade within power sub-modules'), (Recommended Action: 'Please connect both the power feed cables(s) and try again.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-STATE_SYNCHRONIZATION_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Could not synchronize the state of error-disabled interfaces from the current version of the software to the new version. Interfaces which were error-disabled before ISSU may not be error-disabled after ISSU.), (Recommended Action: After the ISSU, check that the correct interfaces are error-disabled.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-1-ARB_SERDES_FAIL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Persistent failure in serdes link.), (Recommended Action: Please try powercycling the board using command: 'hw-module loc <> reload'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-TEST_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Service Platform Manager encountered an provisioning info.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE affinity feature?
### Response:
The MPLS TE affinity feature allows MPLS TE tunnels to select or avoid links based on link attributes called affinities or admin groups. Each link can be assigned one or more affinities, and tunnels can be configured with affinity requirements specifying which affinities to include or exclude. This provides granular control over tunnel paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-DEBUGERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error related to the debugging subsystem occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_GSP_MSG_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering for sysdb_mc gsp recv msg size stats failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LNS_EA-6-ERR_IMP_MULTIPLE_NTFCNS
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: A batch from IMProxy contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the LNS EA. No problems should be seen as a result.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-HOST_LINE_OOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Out of Alignment between the NPU and DSP), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Trace initialization failed in packet path. Packet path initialization is aborted and may be retried.), (Recommended Action: Restart the protocol process. 'process restart <protocol> location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-6-NO_PORTS
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The SockIO SPP plug-in found no ports to manage. No packets will be sent/received in SPP (except fabric loopback packets) on this node.), (Recommended Action: If any problems are seen, they may be rectified by ensuring that the XR_INTERFACES environment var has the correct set of interfaces and rebooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-CERRNO_INITFAIL
### Response:
(Severity: 7), (Category: SERVICES), (Description: A failure occurred during the initialization of the CGN process on a particular node. The issue is seen during cerrno operations. The process will be restarted.), (Recommended Action: The issue is seen in cerrno operations. This will impact the debuggability of CGN, thus impacting overall functionality. Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-PKT_INT_ERR_AT_DDRIF_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Packet Integrity Error at DDR interface from Punt/Bridge-0 FPGA on FIA), (Recommended Action: Verify correct version of Punt/Bridge FPGA is loaded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_21
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_DATABIT_STUCK_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory databit stuck on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_EVM_ASYNC_ATTACH
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_IWF_SES_THRSHLD_NO_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_SERVER-1-RELOAD_VIA_FM_FAILED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RP reload was requested due to failure of gn2412 chip. Reload has failed.), (Recommended Action: Please reload the RP on which the fault has occurred to attempt recovery. - If there is only one RP in the system, the system will undergo a full reload. - If the fault occurs on the stanby RP, only the standby RP will reload. - If the fault occurs on the active RP, it will lead to a switchover. The line cards in the lower half of the shelf might reload once. After recovery, no more line card reloads are expected. If the fault still occurs after reload, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is BGP conditional route advertisement?
### Response:
BGP conditional advertisement allows a route to be advertised to a neighbor only if another route exists in the BGP table. It is configured using the advertise-map and exist-map options under the neighbor. The advertise-map specifies the routes to advertise and the exist-map specifies the conditions that must be satisfied.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-NOT_AUTHORIZED_FOR_IPV4_HOME_ADDRESS
### Response:
(Severity: 3), (Category: IP), (Description: The HoA Request option received in the PBU does not match the HoA that the binding has.), (Recommended Action: Note the CoA address and IMSI (if available) from the error message. Check on the MAG that corresponds to the CoA address or the IMSI if statically assigned IPv4 address on the home interface is changed. If yes, then restore the previous address. If the address is required to be changed, first restore the previous address, clear the binding from the MAG, assign the new desired address on the home interface and trigger the binding again. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EEM-2-ACTION_SYSLOG_LOG_CRIT
### Response:
(Severity: 2), (Category: HA), (Description: The action_syslog call from tcl script.), (Recommended Action: Please verify command(s) mentioned in tcl script prior to error message are working fine (on router prompt). If issue is still seen then please provide command details which has resulted into this error condition to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_SERDES-3-ERR_SW_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: software initialization error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_PM_CLEAR_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An I2C error was encountered when attempting to clear the fault / alarm information of a Power Module.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-BIOS_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-NHGROUP_ASYNC_ERROR
### Response:
(Severity: 2), (Category: ROUTING), (Description: NHGROUP programming failed, send async resp. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-6-PLATFORM_FIX_SPA_ENCAP
### Response:
(Severity: 6), (Category: L2), (Description: Debug Information - Fetching Shim Information is successful), (Recommended Action: *None*.Informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-INVALID_ACTION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Invalid Leaf Action. This condition indicates a problem where the fib action being processed by the software is invalid. - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV_AGENT-6-IF_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SFP or XFP or CFP or QSFP enity is inserted into the line card inv_agent collects the port data whenever it is presented.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-ENCAP_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error when retrieving the encapsulation of interfaces via Interface Manager. CFM may fail to function correctly on the Satellites affected.), (Recommended Action: If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was otherwise triggered, then try restarting the CFM Daemon using the 'process restart cfmd location <node>' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-HEALTH_TIMER_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: An error occurred during sysdb health check. Not able to initialize sysDB health timer.), (Recommended Action: In most cases, this would be transient error. However, if this happens repeatedly, please collect 'show tech sysdb' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_RRW_UNLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to release rrw lock to the request record area in shared memory. This is a fatal error, the process will automatically restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-4-WARNING_LOGIN
### Response:
(Severity: 4), (Category: SECURITY), (Description: The sshd encountered a warning condition.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSLIB-7-DBG
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal software debug message for troubleshooting.), (Recommended Action: No action required - these are messages for debugging only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-INTF_FWD_REF_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-RD_AUTO_RD_STATIC_CONFLICT
### Response:
(Severity: 5), (Category: L2), (Description: EVPN: RD Auto is generated from BGP Router-id and VPN-ID in the form RID:EVI. A static RD was configured before this RD Auto was generated and conflicts with this newly generated RD Auto.), (Recommended Action: There are a few actions that can be taken: 1) Change the BGP RID back 2) Configure the conflicting static RD to not conflic with the RD Auto 3) Set a static RD on the EVI that has a conflicting RD Auto)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PHYS_COMMON-6-AINS_CLEARED
### Response:
(Severity: 6), (Category: L1), (Description: The notification Indicating Successful Automatic In-Service Soak Timer Cleared/Expired), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_MAX_TOPO_TIME_OUT
### Response:
(Severity: 3), (Category: FABRIC), (Description: This indicates that the maximum tries for the driver to receive the necessary topology information to initialize the asic has exceeded. The driver will not continually re-request topology information.), (Recommended Action: Check if all the required fabric cards are UP and running.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-6-LTRACE_INIT_FAIL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that ltrace initialization has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_DATALIST_NEXT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-PLL_T4_STATE_HOLDOVER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the T4 PLL output is in holdover, maintaining the most-recent frequency to which it was locked.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_GET_FREE
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods get free error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_1_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-3-MEMORY_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Memory allocation failure occurred in FIB EA layer. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to allocate memory. This condition indicates a problem with the memory allocation.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show logging show running-config show cli history detail loc <> </RP> <LC> </LC> <TECH> show tech-support location <> show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_RSP_HAL-3-GN2412_CHIP_INITIALIZATION_FAILED
### Response:
(Severity: 3), (Category: LIB), (Description: The GN2412 retimer chip that connects the RP to the line cards in the lower half of the shelf failed to initialize after 5 attempts.), (Recommended Action: Try to reload RP/RSP from admin plane or re-seat RP/RSP and check if system recovers. If the fault still occurs after reload or re-seat, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ICMP-7-SYSDB_BIND_FAILURE
### Response:
(Severity: 7), (Category: IP), (Description: IP ICMP Lib encountered failure in binding to SysDB. Typically this error is caused if sysdb is unavailable for an extended period.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action.If does not recover contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDS-4-INIT
### Response:
(Severity: 4), (Category: INSTALL), (Description: An error occurred during initialization.), (Recommended Action: Sysmgr will automatically re-attempt initialization of SDS. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_FAILURE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-INGRESSQ_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to create one of the ingressq queues.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-MASKLEN_TOO_LONG
### Response:
(Severity: 4), (Category: ROUTING), (Description: This message indicates that the UPDATE message contains an NLRI with a length that is too long. Such long NLRI could be the result of an error on the neighbor and are not found in normal updates. The associated NLRI is considered withdrawn.), (Recommended Action: Check the UPDATE messages received from the neighbor.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-4-PORT_REFRAME_SYNC_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Port will not operate reliably), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_SCH_LIB-3-EVM_MSG_ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message signifies that the DLL can not longer receive any event messages from the platform process in the router.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an unexpected/invalid state while trying to process an event for a client request. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-3-PCI_CONFIG_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A pcie error has occured while trying to get the device configuration), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-6-IMC_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the IMC module in the platform L2FIB VPLS component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-ERRMAC
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MAC error were detected.), (Recommended Action: This message indicate occurrence of EPM SWITCH port errors. Please check if the error message is seen continuously. If so, please contact tech-support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabricq Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-DEVICE_ISSU_ROLE_CHANGE_COMPLETE_NOTIFICATION
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This notification indicates when npu driver has completed switching device roles during ISSU run phase.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NULL_NCB_OFF_OF_FSMCB
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager was unable to form a pointer to a shared memory block.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-UNSOL_OPEN_PEER_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Cannot create/find the peer adjaceny construct in peer database), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_MFWD_FRETTA-7-ERR_EDM_REGISTER
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-FRETTA library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-3-ECC_UNCORRECTABLE_SFP_CONTROL_B
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Poller device driver detected multiple bit errors and can't correct on port A.), (Recommended Action: Try to OIR the optics on the poller ports. If problem persists, plugin different optics and do also try for LC reload. If still problem persists, it could be faulty optics.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-6-CONTROLLER_DELETE
### Response:
(Severity: 6), (Category: OS), (Description: Controller Creation Successfull.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-7-INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: The code has performed an action which should not be possible.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA_LTRACE-3-INTERNAL_INIT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA ltrace lib failed to initialize the internal ltrace This has zero impact on the functionality.), (Recommended Action: This message should not occur everytime. Check for memory conditions on the node. Contact TAC, in case it persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens when you delete a physical interface configuration in IOS XR?
### Response:
When you delete a physical interface configuration in IOS XR, the system automatically removes all configuration associated with that interface, such as IP addresses, routing protocol configuration, and QoS settings. This simplifies interface removal and ensures consistency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-MFIB_RESET
### Response:
(Severity: 5), (Category: ROUTING), (Description: Got notification that the the MFIB has been reset. Will clear MFIB and restart), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_ROUTES_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-1-AUTO_UPGRADE_FAILED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The given FPD upgrade failed via install for the given reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-3-RT_FAIL_RC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error encountered in memory allocation or in message sending.), (Recommended Action: Please collect the 'show logging' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-7-CREATE_IDB_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Netio already has this IDB in its datastore. It is getting a request for create for the same interface handle but with a different name. This could possibly cause issues with this interface in NetIO.), (Recommended Action: After the information is gathered, restart of netio/ifmgr should possibly bring netio in sync with ifmgr leading to the delete of this idb from Netio. If the create operation is retried it might succeed. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-FSDBAGG_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed to initialize FSDB aggregator with the above reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB-3-SYSDB
### Response:
(Severity: 3), (Category: SNMP), (Description: Ifmib has failed during sysdb operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-QLT_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: *SUPPORT*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-3-DRV_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (spa_oc48) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger SPA reload. After a certain number of SPA reloads, the shelf manager will permanently shutdown the SPA.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-4-MAINT_IMG_BOOT_REQ
### Response:
(Severity: 4), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-INSTALL_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IOS XR ISO image installation failed on the indicated card. Shelf Manager will attempt to re-install the image to recover from the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-6-ISSU_INFO
### Response:
(Severity: 6), (Category: MGBL), (Description: Discovered issu role change nofication from process manager.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-SYSMGR_GET_PROC_ROLE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failed to get the redundancy related proc role information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_RIB_LIB
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an unexpected error whilst performing the specified operation using the RIB client library. This may be a resource starvation problem but is most likely to be an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option dynamic feature?
### Response:
The MPLS TE path-option dynamic feature allows MPLS TE tunnels to be routed dynamically by the MPLS TE software, using a path calculation algorithm that considers the tunnel's constraints and attributes. Dynamic path-options do not require an explicit path to be configured. They provide flexibility in path selection.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-PREMATURE_OP
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: A client performed an operation on an interface that is in the progress of being created. In general, the interface handle for the interface being created is not published until the interface create has completed. The most likely reason for this log is that the client is using a stale interface handle (for example, from before a linecard OIR). An IM_ERROR_NOTFOUND error is returned to the client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_CPP_LP_FIFO_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS to CPP low priority FIFO multiple bits error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-INPUT_PRIORITY_WRONG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Priority given for the node is not applicable.), (Recommended Action: Verify the priority given for this node and enter the correct priority.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_UCORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory uncorrectable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-MBI_BOOT_HOLD
### Response:
(Severity: 3), (Category: MGBL), (Description: The function sysmgr_mbi_boot_hold failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTQ3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBQSMGR-1-READY_REGISTRATION_FAILED
### Response:
(Severity: 1), (Category: INSTALL), (Description: The communications channel to QSU Manager is unavailable.), (Recommended Action: The process is automatically restarted, which should lead the process to recover its state, and attempt to participate in the QSU again. If this process is involved in protocol operation, then there may have been packet loss as a result of this event which requires remedial action. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_HD_MEM_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR Head memory module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-DEV_CPAK_SUPPORTED_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A supported error was detected during CPAK initialization. A support error is reported when the CPAK type can not be determined or it is not supported on the platform. The CPAK is the pluggable optics on the line cards. CPAK initialization may happen when linecard boots up, CPAK OIR and line card process restart. The optics will not be enabled if an CPAK supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-2-FAB_ACTIVE_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Mismatch in fabric active signal between FPGA and Crossbar ASIC.), (Recommended Action: Driver will try to recover from this failure by reloading the card. If this issue persists even after card reload then please RMA the card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE_MAIN-3-TRACE_BUFF_INIT
### Response:
(Severity: 3), (Category: L2), (Description: 'Trace buffer initialization failed .' 'Tracing will not be functioning properly.' 'Process will proceed running.'), (Recommended Action: 'Process restart can solve this issue.' 'If proplem exists even after process restart,' 'please collect the error log with return value' 'and core dump of the process and contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-BANDWIDTH_REMAINING_RATIO
### Response:
(Severity: 3), (Category: QOS), (Description: The bandwidth remaining ratio is invalid at this level. The message will provide further details on the error.), (Recommended Action: Please adjust the bandwidth remaining parameters in the policy map.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-FILE_SIZE_ERR
### Response:
(Severity: 5), (Category: L2), (Description: The size of the SPA File is too big.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-INFO_PARAM
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: The message is just for information. No action is needed. Be aware about the warning/info that is printed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_NSF_DUP
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-4-COUNTER_OVFL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The particular scenario mentioned in the message was detected for an unknown reason. This is not a critical failure, the process can continue functioning as expected despite the event.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_RESTORE_SET
### Response:
(Severity: 3), (Category: OS), (Description: nrs_chm_chkpt_create_set failed while restoring the set attributes from chkpt shred memory after nrs server process restarts.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-3-WRITE_TLV_OFF_FAILED
### Response:
(Severity: 3), (Category: MEDIA), (Description: Function write_tlv_in_offset write the TLV data which is being pointed by region offset. This function used to for writing NVRAM TLV from XR. Write the reboot history record in the offset position. Operation write failed for the nvram bin file. Refer the reason why it is failed.), (Recommended Action: Based on the failed reason, please take action. Listing few actions, erase nvram-raw: loc <loc> may solve the issue. If erase doesn't help, please contact the TAC team fro further help.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-4-WARN_DEBUG
### Response:
(Severity: 4), (Category: IP), (Description: The VRRP process failed to output a debug message. This may not impact functionality but it does impair the debuggabilty of the VRRP process. And may indicate that there is a failure with the IOSXR debug infrastructure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-LTRACE_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to initalize a ltrace buffer.), (Recommended Action: When this issue happens, it will not able to use ltrace buffer for debugging. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-SAME_RD_SET
### Response:
(Severity: 4), (Category: ROUTING), (Description: The import policy must not perform set operations on paths, received from a PE neighbor, whose RD is the same as the RD for the importing VRF. The set operation has been ignored.), (Recommended Action: Modify the import policy so that it does not perform the set operation, or use globally unique RDs for VRFs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-6-MAC_ACC_NOT_PROGRAMMED
### Response:
(Severity: 6), (Category: L2), (Description: Some MAC addresses have not been programmed for MAC accounting in the hardware. This means that MAC accounting statistics will not be collected for these MAC addresses. This is most likely due to a lack of hardware resources due to a large number of MAC addresses being programmed for MAC accounting.), (Recommended Action: This condition will only affect statistics collection for some MAC addresses on this interface. If the number of MAC accounting addresses programmed, which can be checked using 'show mac-accounting', seems small and this issue is still hit this may indicate a system error, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-INSUFFICIENT_BUFFER_SIZE
### Response:
(Severity: 3), (Category: SECURITY), (Description: A buffer is required in order to fill a certain data but the buffer size was too small.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELOGM-4-DEBUG_INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: During initialization, the Global Manager failed to initialize the debug module and will now exit. It should be restarted by System Manager and resynchronize it's internal state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-3-VIN_LOW_LEVEL_MAJOR_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: 'Input voltage level is too low for this module, it crossed the major alarm threshold'), (Recommended Action: 'Check/Charge the batteries.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-6-INFO
### Response:
(Severity: 6), (Category: DIAG), (Description: Informational diagnostics message.), (Recommended Action: Nothing. Reporting normal progress of diagnostics.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-6-SLICE_AUTO_RESET_DISABLED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Slice reset due to internal trigger is disabled due to config.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_SPP-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HFR SPP Initialization Error message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn spp process, up to a fixed number of times the error is encountered, to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAP_LISTEN-3-GEN_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: This message is displayed when the system manager process is not ready or when an error occured while attaching the managed timer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes sap_listen detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes sap_listen detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process sap_listen error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process sap_listen error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sap trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sap trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-4-VLAN_TAGS_IN_CLEAR_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: The No. of VLAN Tags from Configured Encapsulation is not matching with no. of VLAN tags configured under the policy which is applied on the interface.), (Recommended Action: If number of VLAN tags does not match the policy configuration, either change the Policy OR change the Encapsulation under the sub-interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-5-OIROUT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Entity specified in the messages is removed from the chassis.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GSP_EM-6-FABRIC_MEDIA_DISABLED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: GSP fabric media is disabled in this mode and Ethernet media is enabled.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_10_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-EFD_SHUTDOWN_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred when attempting to shut down an interface using EFD after a fault condition was detected on the interface. This event was triggered by either a change in stateful condition of the link, a process restart or a change in configuration that enabled EFD on a particular action. This will result in the interface remaining up, when it should be shut down.), (Recommended Action: If the error is the result of a configuration change, remove and re-apply the configuration. If this does not work the error may be cleared by restarting the ethernet_link_oam_daemon process on the node where the error is occurring. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-POWER_BUDGET_CLI_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The power budget profile extended-temp is being deprecated. If this config is found on upgrade or configured by user. It will be convertedd to the new version, power budget profile extended temp rack <0/1> The new CLI syntax is required to support clustering. Coversion is being carried out to maintain backward compatibility.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-BAD_RSVP_MSG_RCVD_AUTH_TYPE_MISMATCH
### Response:
(Severity: 5), (Category: ROUTING), (Description: The router received an RSVP message with an authentication digest type that does not match the type configured on the router. RSVP discarded the message because the digest cannot be verified.), (Recommended Action: Check the configuration on the router and sending system to make sure that the authentication configuration is compatible. Especially ensure that the cryptographic-algorithm for the specified key ID's match.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_VRF_INTERFACE_CREATE_SUCCESS
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic network VRF has been created on the interface'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-SAT_SPEED_DUP_DEGRADE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a notification to user that the speed / duplex parameters of a particular port set to auto negotiate has degraded post negotiation from its maximum capability due to either lower capability of the peer or the the peer not able to engage in auto negotiation.), (Recommended Action: This might require some manual config changes for other dependent features such as Sat QoS. 'Fan mismatch - %s on Satellite %d')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMRP-4-ROUTE_DELETE_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred when attempting to delete the platform route resource. This may prevent other routes for other I-SIDs being created in the future. It is likely that the route will have been removed (even though an error occurred), but to check which routes are currently installed, run 'show l2vpn bridge-domain mmrp'.), (Recommended Action: There is no way to retry this deletion, and this warning is not expected to be seen (because delete operations are best-effort). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZL-7-ERR_INIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Zarlink driver initialization failed.), (Recommended Action: Failure action and reason is part of error message. The process will be restarted in some time. But if error is seen/persists with every restart then contact TAC with show tech-support frequency sync)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NCD-3-INIT_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: An software error occurred during the initialization of the NCD process.), (Recommended Action: NCD will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show l2vpn bridge-domain' command in IOS XR?
### Response:
The 'show l2vpn bridge-domain' command is used to display information about the bridge domains configured for L2VPN services. It shows the bridge domain name, ID, the associated interfaces, the pseudowires, and the VPLS ID if the bridge domain is used for VPLS. This command is useful for verifying the L2VPN configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_NVSAT_EA-6-HW_INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the LC hardware in the platform NVSAT_EA component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-SPAN_SRC_PORT_ADD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A failure has occurred while adding source port to a span session.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP Tx power greater than or equal to the high Tx power alarm threshold. The XFP is the pluggable optics on the line cards. The Tx power threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Replace the XFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MAX_LEN_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error FIA 00 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp graceful-restart' command in IOS XR?
### Response:
The 'mpls ldp graceful-restart' command is used to enable LDP Graceful Restart. This feature allows an LDP session to be maintained during an LDP process restart, avoiding the need to re-establish the session and minimizing traffic loss. It requires the neighboring routers to also support LDP Graceful Restart.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-PACKETMGR_CONNECT_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 IO process failed to connect to the packet manager), (Recommended Action: Restarting packet manager process and then ipv6_io may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-7-STALE_WAVELENGTH
### Response:
(Severity: 7), (Category: L2), (Description: DWDM Controller Interface owner has lost contact with GMPLS Client. The controller shall continue to operate on the existing wavelength, resync to happen after reconnect with GMPLS Client. This is an informational message.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-6-SESSION_EXTENDED
### Response:
(Severity: 6), (Category: L2), (Description: A loopback session has successfully been extended. This is for informational purposes only.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-EVENT_INIT_EVENT
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when initializing a sigevent structure using event_init_event.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-MEM_ALLOC_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC Driver failed to allocate memory for the specified operation. Process core will be generated and restart as attempt to recover from this resource failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-EVENT_CONN_MGR_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to open connection to Connection Manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_map_agent detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_map_agent detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. From the above command, use the Job ID and try the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-CLIENT_WRITE_QUEUE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Writing data to client queue is failed. %s- Queue writing failed reason.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-VMM_INIT_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: A failure occurred attempting to initialize with one or more Sysadmin services required by the ISSU Manager. ISSU Manager will restart itself and attempt to retry.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-7-INVALID_ERROR_ARRAY_STATUS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-COLD_RESTART
### Response:
(Severity: 7), (Category: HA), (Description: A process failed to restore state from a table in the CDM store.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-3-LVSTATE_FILE_DELETE_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: The secondary disk XR LV state file has not been deleted.This could mean that the file doesnt exist or corrupt secondary disk. There wont be any impact on the sytem and its operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_PKDTUPLECRE
### Response:
(Severity: 5), (Category: SYSDB), (Description: An error occurred creating a packed tuple.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-APPL_RESYNC_MISMATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detected a db inconsistency when performing a resync with an application.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-FATAL_WRAPPER
### Response:
(Severity: 2), (Category: ROUTING), (Description: A function call failed unexpectedly - this is probably a system problem), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR optimal option?
### Response:
The MPLS TE FRR optimal option allows the best available backup path to be used for FRR by considering the tunnel's constraints and attributes. It tries to find a backup path that is identical to the primary path with respect to bandwidth, affinities, priority, and so on.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IS-IS establish adjacencies between routers?
### Response:
IS-IS routers send Hello packets to discover neighbors. If certain parameters in the Hello packets match, the routers will form an adjacency. The parameters include authentication, area ID, and IS type (Level 1, Level 2, or Level 1-2).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-SR_SID_CONFLICT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The same prefix SID cannot be configured (either as index or absolute) value on more than one prefix in the network. The prefix SID will not be used until this inconsistency is resolved.), (Recommended Action: Fix the configuration such that the SID value does not conflict.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALARM_LOC_TEST-4-SIMPLE_WITH_SOURCELOC
### Response:
(Severity: 4), (Category: MGBL), (Description: This is a simple message with alarm_location set to true), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-5-TFTP
### Response:
(Severity: 5), (Category: MGBL), (Description: An error has occurred while tftp dumping of the collected data from the pm collector process. This error could error due to various reasons below : a) No tftp server configure in pm configuration. b) TFTP Server is not reachable. c) TFTP Directory configured does not have write permissions.), (Recommended Action: Try eliminating the reasons mentioned in explanation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver version is not compatable with the hardware version.), (Recommended Action: Upgrade the CPU controller FPGA image using FPD procedure followed by reloading of the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-3-BAG_REGISTRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MFWD-HFR library encountered internal error during EDM init setup.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-ENABLE_KPROBES_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: The XLNC process's Netbroker library has failed to insert kprobes which are used to receive data from a BPF program which monitors Linux socket events within the kernel. This information is needed for proper functionality of the Linux Packet Classifier, and so the XLNC process will restart.), (Recommended Action: The problem should resolve automatically by process restart, which is triggered as part of the error handling flow. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_DRV-7-SCL_HANG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An I2C bus hang has been detected. Recovery is automatically attempted. Should the recovery be successful, a BUS_UNHANG_SUCCESS message is issued; otherwise, an UNRECOVERABLE_BUS_HANG is issued.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-MPA_POWER_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to power on the MPA during initialization. The software attempts to recover from this error. This message also provides an error code and a string interpretation of the error code.), (Recommended Action: Please copy the error message exactly as it appears on the screen, collect console log and the following information. Contact your technical support representative with the gathered information. - sh platform - show tech-support ethernet interfaces - show diag - show diag <> eeprom-info; Eg., 'show diag 0/5/0' Please try to reload the MPA using CLI 'hw-mod subslot <> reload'. If the issue persists, please physically remove and reinsert MPA. In case the issue is not resolved, please contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_9_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-IMPACT_INFO_MISSING
### Response:
(Severity: 4), (Category: INFRA), (Description: The install infrastructure was unable to find information on the impact of an install operation. As a safe fallback, it is assumed that the change requires a system reload.), (Recommended Action: The operation can be completed but will definitely be a reload operation. Either: - Continue the install operation, via 'install apply reload' Or: - Abort the install operation, via 'install package abort all-since-apply', and restart the operation. Note, the re-started operation may still be a reload operation. If you require any investigation into why the impact information is missing, then: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-CARD_RELOAD_CFG_DONE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Setting of the reload attribute on the indicated card has completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_Driver-6-UPGRADE_RESULT
### Response:
(Severity: 6), (Category: INFRA), (Description: Update FPD upgrade Status), (Recommended Action: The reson for failed FPD upgrade to be analyzed. Please contact Cisco Technical)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-WARNING_INFO_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace all loc <slot number>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-NETLINK_NOTIFICATION_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: The process received an error from the kernel with sequence number of 0, indicating that the error was not in response to a specific query issued by the process.), (Recommended Action: If the problem persists, restart the process. If the problem persists through process restarts, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-BAGS_UNREG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to unregister a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-3-ERR_INIT
### Response:
(Severity: 3), (Category: L2), (Description: The SPA driver on the linecard failed to initialize. The SPA driver controls all the hardware on the SPA. If the SPA driver fails to initialize, no traffic will pass, no SPA related infrastructure will work. %d - SPA bay number %s - indicates the reason for the failure %s - is the decoded error reason), (Recommended Action: The SPA infra will automatically restart the SPA driver, up to a fixed number of times when this error is encountered, to recover. Execute 'show platform' to verify the SPA is in READY state, if not, try to reload the SPA with command: hw-module subslot 0/x/x reload or if the system has no response to the command above, force to reload the SPA with follwoing sequence under config mode: hw-module subslot 0/x/x shutdown commit no hw-module subslot 0/x/x shutdown commit If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_1_FIA_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error - 1 from FIA on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE_ERR_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE_ERR_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRIVER_LITE-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabric driver was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr_lite) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-4-PCI_BUS_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A PCI bus error has occurred. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-FIND_FILE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: When the rpl multi-version coordinator tried to locate the dll, an error was encountered. Because of this, no response will be returned.), (Recommended Action: Check the install logs if all the packages are downloaded and install operations completed properly Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-2-USAGE
### Response:
(Severity: 2), (Category: OS), (Description: Incorrect command line parameters were passed to the cds proxy, and so it failed to start.), (Recommended Action: Check the startup arguments passed to nrs server. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIV2_DM-3-NO_MEM
### Response:
(Severity: 3), (Category: L2), (Description: Driver manager encountered a fatal memory allocation error), (Recommended Action: Reduce other system activity (e.g. by killing non-essential processes) to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTT3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-SYSDB_OP
### Response:
(Severity: 3), (Category: L2), (Description: Unexpected failure performing a SysDB operation. The operations could be sysdb registration, init etc.), (Recommended Action: Check SysDB is still running, and if not restart it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-ACCESS_DEVICE_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error occured while accessing the device. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_MEMMON-2-MEM_CRIT
### Response:
(Severity: 2), (Category: INFRA), (Description: Memory usage is above severe threshold, state is SEVERE.), (Recommended Action: Please check top five memory consumers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-6-UPGRADE_STARTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that the Canbus Controller firmware on the specified loation is going to be upgraded with the image at the specified path.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PTP PLL device initialization for dp83640 FAILED in PTP controller process.), (Recommended Action: Performing a redundency switchover will be the recommended action for HA system or perform a router reload in case of stand alone system to overcome this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_MGD_TIMER_NEW
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-7-ERR_ECM_CREATE
### Response:
(Severity: 7), (Category: L2), (Description: The ASIC Error library encountered an error during the creation of the Error Connection Manager.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-VRF_REG_DROPPED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A VRF registration operation request received when server is not initialized.), (Recommended Action: Controller and/or agent must ensure that VRF registration operation requests are sent only when server is ready. If message is still seen after meeting these conditions, contact Cisco for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC-3-L3
### Response:
(Severity: 3), (Category: SERVICES), (Description: Log level in sbc app is set to higher than nbb_console_unconditional_log_level. Use errmsg facilty to print error message), (Recommended Action: collect ips and pd trace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCM_EA-2-DEBUG_INIT
### Response:
(Severity: 2), (Category: L2), (Description: Internal error. The debugging logs will not be activated. It should not hamper the fuctionality though.), (Recommended Action: This could be a result of low memory condition at the node. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-5-MSG_CKSUM_DATA_ERROR
### Response:
(Severity: 5), (Category: OS), (Description: The message received by an application had a wrong cksum value. The message data could be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-GET_BOARDTYPE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_spa_server process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process cctl_spa_server location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR7
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMLOG-3-MEMALIGN
### Response:
(Severity: 3), (Category: OS), (Description: This function is not supported.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-7-CBC_PRE_RESET_NOTIFICATION
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Informational log only), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-DISK_SPACE_CHECK_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The root filesystem is too full on some nodes to carry out the install operation.), (Recommended Action: Remove unnecessary files from the root filesystem of the node(s) in question. If any RPs have insufficient disk space, unnecessary rollback points may be removed using 'clear install rollback id <id>'. If an Install transaction is currently in progress, removing files or rollback points that were present before the start of the transaction will not affect disk space usage (as they are still present in the fallback snapshot) so the transaction must be ended by one of: * Install commit. Files or rollback points may be removed before or after commit. * Abort of the transaction. Files or rollback points should be removed following the abort. * Reload. Files or rollback points should be removed following the reload. Once files have been removed, the Install operation may be retried.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_BYTES_RECV
### Response:
(Severity: 3), (Category: OS), (Description: APS BYTES RECV. It is applicable for Digi 20x10g and 2x100g Digi cpak cards.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LI_EA-7-INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of packet filter process has failed due to one of the following reasons: 1) Failed to initialize event manager. This would prevent process from receiving events. 2) Failed to register with debug. This would prevent process from logging debug messages. 3) Failure to connect with SYSDB. 4) Failed initialize internal permit/deny entries for IPv4/IPv6. These entries are needed for programming/removal of hardware entries for IPv4/IPv6 security ACLs. 5) Failed to initialize connection with interface manager proxy service. 6) Failed to initialize RLB (range logic block) checkpoint. This is needed for checkpointing range logic block information for restore on process restart. 7) Failed to initialize Feature EA DLL API needed for programming of hardware resources. 8) Failed to initialize callback function from Feature EA DLL for compiling IPv4/IPv6 TCAM entries needed for security ACL programming in hardeare. 9) Failed to initialize callback function from Feature EA DLL to handle reprogramming of RLB and IPv6 source prefix compression table request from TCAM manager. 10) Failed to initialize feature checkpoint info. This is needed for checkpointing IPv4 and IPv6 security ACLs programmed in hardware. 11) Failed to initialize callback functions from ACL configuration manager to perform hardware resource checks and ACE resequencing. 12) event_block failed. This indicates process has encountered unexpected error while waiting for events. 13) Failed to initialize callback functions for receiving incremental updates for IPv4/IPv6 security ACL configuration.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-PEER_INDEX_EXHAUST
### Response:
(Severity: 4), (Category: L2), (Description: PTP was unable to allocate a peer index to a PTP peer, as all available peer indices are currently allocated. PTP MIB data may be unreliable.), (Recommended Action: Restarting ptp_ma on the affected node may fix this error. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MULTILINK_UV-3-EVENT
### Response:
(Severity: 3), (Category: L2), (Description: An error (other than EINTR) occured in the event loop. The process must exit.), (Recommended Action: Identify the location of the card where there error was reported. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory location <location> summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory location <location> summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-2-THRD_POOL_START_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Eth Server thread pool start failed , responsible for handling lwm messages. n Eth server process will be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-CAP_CHANGE_DYNAMIC
### Response:
(Severity: 4), (Category: ROUTING), (Description: A capability was installed/updated/uninstalled by an LDP client. LDP peers that don't support Dynamic Announcement will not learn of the change until the LDP session has been reset.), (Recommended Action: Use the 'show mpls ldp neighbor capability' command to determine which neighbors need to be reset. Reset LDP neighbor using the 'clear mpls ldp neighbor ...' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to apply a route-policy to BGP in IOS XR?
### Response:
A route-policy is applied to BGP in IOS XR to control route advertisement and acceptance based on custom criteria. route-policy POLICY-NAME
if destination in PREFIX-SET then
set local-preference 200
endif
end-policy
router bgp 65000
neighbor 192.0.2.2
route-policy POLICY-NAME in
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an interface description in IOS XR?
### Response:
To configure an interface description, which provides clarity on the interface's purpose, use the 'description' command in interface configuration mode. RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-if)#description 'Uplink to ISP'
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-3-RMF_OBJ_UPD_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to update the rmf redundancy object. Processmgr would retry and if it continues to fail the system would be in inconsistent state. Reload the node to recover.), (Recommended Action: Collect showtech processmgr and show redundancy trace all location all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_LIB-7-ERR_LWM_SEND
### Response:
(Severity: 7), (Category: FABRIC), (Description: Unable to send a LWM message to the CCSQ server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-6-UNNUM_CFLCT_NO_LONGER
### Response:
(Severity: 6), (Category: IP), (Description: The IP unnumbered specified in the message references previously referenced another unnumbered interface. This is no longer the case.), (Recommended Action: None. This is an informational message indicating a return to a correct consistent configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-ERR_EDM_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Initialization of the EDM server failed. It is not service impacting error but could impact TEJAS registers access via GASPP.), (Recommended Action: Restart the plim_services process (process restart plim_services location <>) If the issue persists, do a cold reboot Services PLIM MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TS_LS_DISABLED_TYPE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a disabled type error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-FANTRAY_RPM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: One or more fans on indicated fan tray operating above 30% of the set RPM. This is not a critical condition.), (Recommended Action: Verify the failure, give CLI: (admin)# show env --> particularly fan and temperature output (admin)# show env trace If the failure does not alleviate after 30 minutes, give CLI: If the problem persists for 1+ days, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXMGR-2-WARN_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMPOOL_EDM-3-SYSDB_BIND_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Could not connect to sysdb), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_15_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_8P_GE-2-SPA_CTX_ERR
### Response:
(Severity: 2), (Category: L2), (Description: The spa_ether_ctx context data cannot be set.), (Recommended Action: collect the trace log via 'show plim ether trace error location <>' 'show plim ether trace info location <>' 'show tech-support ethernet ' 'show plim jacket trace all location <>' and collect console logs and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-SHMWIN_MALLOC_ERROR
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: IM was unable allocate memory from shmwin. This usually can happen if shmwin memory is exhausted /or fragmented. IM may exit and restart in an effort to help clear the condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_FETCH_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Invalid FGID value recieved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-PARITY_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: UART encountered parity error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-EVM_CREATE_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper creates multiple event manager to keep track of various events. Failed to create event manager for the process), (Recommended Action: Contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PINGMIB-3-NOMEM
### Response:
(Severity: 3), (Category: SNMP), (Description: A software error occured when the ping mib process try to request more memory. The requested operation by pingmib could not be accomplished because of a low memory condition.), (Recommended Action: If the problem recurs, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_ADD_FILE_INTO_TABLE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not creat a required new file node with given view and actual paths and insert it into the table, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-MEMORY_CONDITION
### Response:
(Severity: 3), (Category: INSTALL), (Description: During a high memory usage install operation, the install director has received a memory state change notification from wdsysmon. In order to allow routing application to continue, the install director will restart to free any memory it is using. However, this will cause the current operation to abort.), (Recommended Action: This indicates a low memory condition. Once the memory condition has been rectified, run the install operation again. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO-4-NOT_SUPP
### Response:
(Severity: 4), (Category: L2), (Description: The specified action is not supported by the SPIO platform libraries.), (Recommended Action: If any problems are seen, they may be rectified by removing the unsupported configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-3-REDUNDANCY_STATE
### Response:
(Severity: 3), (Category: HA), (Description: LRd doesn't recognize redundancy state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-2-ASIC_FABRIC_BW_BELOW_THRESHOLD
### Response:
(Severity: 2), (Category: FABRIC), (Description: 1. The number of fabric links available has dropped below the the configured/default threshold. Bringing down the front panel links to avoid traffic loss.), (Recommended Action: Check the health of the ASIC fabric links health. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE_CLIENT-3-ERR_CDI_UNBIND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in i2c driver due to cdi unbind function call failed in the particular rack.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-MPA_UNSUPPORTED_OPTICS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This Optics is not supported for this MPA Version. Please check with Cisco tech team for more informtion.), (Recommended Action: Remove the Optics from the MPA or migrate to MPA hardware which supports it. If the issue occurs under other conditions, such as when Optics OIR was performed, then copy the error message exactly as it appears on the screen and collect console log and the following information. Contact your technical support representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-GO_ACTIVE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Fatal error handling node state transition to active.), (Recommended Action: The RIB process should have restarted automatically and then gone into active state successfully. If not, try manually restarting it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WATCHDOG-3-PI_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: This message indicates that a failure has occured in Watchdog), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-EXITING
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon failed to process an event or has encountered an unrecoverable error, and will now exit. It should be restarted by SysMgr, allowing it to resynchronise its internal state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-3-DMAC_LINK_STATE_CHANGE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The internal link interface for the specified port is down.), (Recommended Action: Gather the data listed in 'required_info'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-EDM_BIND
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB client library was unable to complete an EDM 'BIND' request as the EDM registration information sent with the message was invalid for the EDM.), (Recommended Action: Ensure the LWM channel name used by this client is not being used by any other EDM. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in Shelf Manager, but there is not corresponding error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-3-CALENDAR_UPDATE_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred during calendar clock update. This causes the calendar clock cannot be adjusted accordingly to NTP server or peer), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV4PROTO-6-PAKHDR
### Response:
(Severity: 6), (Category: IP), (Description: There was a problem reading the full IP header for a packet being sent. The packet would be dropped.), (Recommended Action: Do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_RADIUS_OVRID_CFG_UNXPECT_UPD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The RADIUS override port limit configuration had already been applied once, and now a different limit has been configured. This is unexpected behaviour, and indicates that there has been some sort of misconfiguration via RADIUS.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-7-ERR_SYSDB
### Response:
(Severity: 7), (Category: L2), (Description: ASIC Error library encountered an error during the specified SYSDB operation.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-2-DISK_CRIT
### Response:
(Severity: 2), (Category: HA), (Description: When some monitored disk's usage is above 95%.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_REMOVED
### Response:
(Severity: 6), (Category: L2), (Description: The BFD session has been removed. This is due to the application(s) removing the BFD session. This can happen as a result of BFD being unconfigured under the application(s) or as a result of the application(s) adjacency being removed.), (Recommended Action: Check the applications peering status.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-3-FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-OOR_VRF_BSR_GRANGE_LIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: OOR Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_VERSION_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: The BFD session has been brought administratively down to change protocol version.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-PPU_TRY_LATER
### Response:
(Severity: 3), (Category: FABRIC), (Description: FPD upgrade in progress, FSDB aggregator got RETRY msg from FPD infra, retry PPU CMD later), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_PM_TEST-3-ERROR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: skp_pm_test encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.), (Recommended Action: This is just test software which the customer does not get.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rewrite-1-DB_NOT_UPDATED
### Response:
(Severity: 1), (Category: L2), (Description: The information for the interface has not been added to the database. Any packet rewrites will not succeed as the information is not available. As a result of packet rewrites failing, the protocol associated with this process may not operate correctly), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Ensure that the configuration has not exceeded the supported numbers for this protocol; if it has, remove some of the configuration and restart the process that output this syslog.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_RANGE
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-3-ERR_ASIC_GENERIC
### Response:
(Severity: 3), (Category: FABRIC), (Description: CCSQ encountered a device error that has exceeded its threshold value. Driver takes appropriate action to log and fix the error which may include a device reset.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_THREAD_SET_NAME
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred whilst setting a thread name. This may be due to resource starvation or an internal programming error. This is not a fatal error as the name is only used for debugging and error messages.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-6-INFO_INIT_LOG_BACKUP_FILE
### Response:
(Severity: 6), (Category: SECURITY), (Description: SAM failed to initalize log backup file in NVRAM, log entry not backed up), (Recommended Action: 'This message is just for information.No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-6-OD_OPERATION_FINISHED
### Response:
(Severity: 6), (Category: INFRA), (Description: The SLA Client Library has finished processing an on demand operation. The metrics collected for this shall exist for two weeks before being automatically cleaned up if not manually cleared before then.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-OSI_SOKT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Failed to perform a socket operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-DBWRITE
### Response:
(Severity: 3), (Category: IP), (Description: Fail to write a DHCPv6 binding database file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-1-ENCRYPTED_LV_RECOVERED
### Response:
(Severity: 1), (Category: OS), (Description: A failure was seen during boot while setting up encrypted logical volume. It has been recovered automatically by removing and recreating the encrypted LV and the encryption keys. Since disk encryption is not activated on this system, it should continue to operate without any loss of configuration data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-0-EMERGENCY
### Response:
(Severity: 0), (Category: OS), (Description: The system is unusable. Possible resource shortage or coding error.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_6
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port 6.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Cisco IOS XR Health Check feature?
### Response:
The Cisco IOS XR Health Check feature allows monitoring the health of the system and its components, such as the CPU, memory, disk, and network interfaces. It provides a set of predefined health check tests that can be run periodically to detect any anomalies or failures.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-6-PLANE_GROUP_DISABLED
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message gives additional information related to a plane in multicast-down state. It reports that a group of fabric cards are unable to send traffic to any destination. For CRS-1 16-slot chassis, group 0 is the upper shelf containing line cards 0 to 7. Group 1 is the lower shelf containing line cards 8 to 15 and both RPs The message reports the number of operating data links from the specified group to the fabric plane that are operating. The reported threshold is the number of data links that should be operating in order to make the fabric group usable.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-7-PERSISTENCE_FILE_MISSING
### Response:
(Severity: 7), (Category: SNMP), (Description: SNMP agent reads default engineID and engineboots from a persistence file on startup. File is missing, and will be created, reset engineboots to 1), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-INCORRECT_DIRECTORY_PERMISSIONS
### Response:
(Severity: 4), (Category: INFRA), (Description: XLNCd runs scripts on router start up and when to XR EXIs are created. Incorrect permissions were found when checking those of the containing directory and parents.), (Recommended Action: If this scripts are intended to be run, ensure that the containing directory and each parents up to and including / are owned by root or XLNC and not writeable by anyone other than the owner, and not a symlink. Then restart the XLNCd process and undo then reapply any linux networking configuration. If the problem persists through process restarts, If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APIV-3-MODULE_INCOMPATIBLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: APIV module version negotiation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_SCH_MEMP_ERR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Scheduler Hang, Sram or egress mid-fifo parity error on NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_VPN_MIB-3-ERR_DLL_LOAD
### Response:
(Severity: 3), (Category: OS), (Description: Cannot load DLL error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-PROFILE_NOT_FOUND
### Response:
(Severity: 3), (Category: SECURITY), (Description: [1] No ISAKMP profile found matching peer identity. applicable to RESPONDER mode only. [2] No ISAKMP profile found matching interface name. applicable only to INITIATOR mode. [3] Peer identity doesn't match the ISAKMP profile associated with the interface. applicable only to INITIATOR mode.), (Recommended Action: [1] 'Make sure an ISAKMP profile exists for peer match-id' [2] 'Make sure that the ISAKMP profile is attached to the proper interface' [3] 'Make sure that the ISAKMP profile attached to the interface matches peers identity')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_9_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-SEND_PULSE_FAIL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP5
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-2-TAKING_NODE_DOWN
### Response:
(Severity: 2), (Category: FABRIC), (Description: Ingressq DLL encountered an fatal error mentioned above. The driver triggers MSC node-down to recover from the error.), (Recommended Action: This might be a recovery action from a fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_1_OFLOW_NPU2BR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-1 NPU to bridge instance-1 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-PREFIX_SID_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: Warning information regarding prefix SID. It is informational.), (Recommended Action: This is usually due to a misconfiguration. Possible solutions are reconfiguring prefix SID according to the warning.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-READ_REG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Read from register has failed.This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-OS_IMAGE_ERROR
### Response:
(Severity: 5), (Category: L2), (Description: Failed to download the SPA OS image.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-ERROR_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a debug message in the SBUS Driver to indicate an operation or condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-ERR_HW_HARD_RESET
### Response:
(Severity: 2), (Category: L2), (Description: A hardware error is detected on the PLIM. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause hard reset of a device in the data path and will impact traffic. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-3-FUNCTION
### Response:
(Severity: 3), (Category: OS), (Description: A function call returned an unexpcted error), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CCI_LIB_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot initialize the CPU Controller Interface library infrastructure for CPLD initialization and handling. Fabric ASICs access is also compromised.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_DATALIST_FREE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-PROTO_INIT
### Response:
(Severity: 2), (Category: ROUTING), (Description: FIB protocol-specific initialization has failed due to the reason indicated in the message. The process will attempt to recovery by restarting. If the restart count is excessive then the node may reload. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_NB_SERDES_5_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data north bound serdes link 5 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-MPA_SHUT_VIC_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: During MPA shutdown unable to clean up the vic process software corresponding to the bay.), (Recommended Action: If case any issues are observed for the MPA, please try to restart the vic process corresponding to the MPA bay. If the issue persists pls collect the output of the CLI 'show tech-support ethernet interfaces')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-4-WAIT_CONFIG
### Response:
(Severity: 4), (Category: L2), (Description: During brinup of Wanphy SPA, the config has to be restored before init. With this we can decide whether to get SPA in LAN or WAN mode. This message indicates that config restore of wanphy is getting delayed), (Recommended Action: No explicit action is required, if it gets delayed, SPA state machine would timeout and reload the SPA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-5-ADJCHG
### Response:
(Severity: 5), (Category: ROUTING), (Description: An OSPF neighbor has changed state. The message describes the change and the reason for it. This message appears only if the <Bold>log-adjacency-changes<NoBold> command is configured for the OSPF process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CORRELATOR-4-BUFFER_RECYCLE
### Response:
(Severity: 4), (Category: MGBL), (Description: The alarm correlation buffer is full; the oldest correlation specified in the message is dropped from the buffer to make room for the new correlation.), (Recommended Action: No action need to be taken as its just a warning message to let customer know correlation buffer is full now and we will be wrapping the buffer in the circular manner.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_SEND_MSG
### Response:
(Severity: 7), (Category: OS), (Description: LWM msg send failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-IDPROM_CACHE_OVERFLOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received UART message.), (Recommended Action: Do EP soft/hard OIR, or restart canb-server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-2-ENFORCE_GRACE_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is still enabled beyond the grace period.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-7-INIT_ERROR
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Feature Mgr process failed to initialize correctly. In this case process will restart.), (Recommended Action: No action needed. Process will restart automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-5-CFG_PORT_FAILED_TO_OPEN_CLEAR
### Response:
(Severity: 5), (Category: ROUTING), (Description: The condition triggering the CFG_PORT_FAILED_TO_OPEN syslog has been cleared. The configured port has been successfully opened. The first argument is the name of the configured port and the second argument is the port number.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TASKID_NOT_FOUND
### Response:
(Severity: 3), (Category: MGBL), (Description: Taskid not found, but total number of taskid is greater than 0.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_0_PKT_MINLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_RETRY_EXCEED_SYSTEM_MAC
### Response:
(Severity: 4), (Category: L2), (Description: After attempting to query the system MAC address from SDRd a number of times, the retry limit has been exceeded. The cause of the failure is likely to be an issue with SDRd or Shelfmgr - so check for evidence of this. The process will exit and be restarted automatically so no futher action is needed for Bundle Manager to retry.), (Recommended Action: The Bundle Manager process has exited and will be restarted, so no action is needed. Check that the board (EEPROM etc.) is correctly programmed since this is the source of the MAC address information and therefore one possible cause of the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-4-WARN_DEBUG
### Response:
(Severity: 4), (Category: IP), (Description: The HSRP process failed to output a debug message. This may not impact functionality but it does impair the debuggabilty of the VRRP process. And may indicate that there is a failure with the IOSXR debug infrastructure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-4-IFHANDLE_NULL
### Response:
(Severity: 4), (Category: SECURITY), (Description: Error encountered while obtaining handle for the interface specified as the source interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-4-LATENCY_ABOVE_THRESHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: The RSVP process has received more path create messages than the system can handle in a short period of time. Path create messages will be dropped until the system can catch up.), (Recommended Action: Check to see that there are no neighbours flooding the router with more path creates than it should, and temporarily shut down the connecting link if there are. Also checked for blocked processes that could be causing a delay. The situation should resolve itself eventually if left unchecked.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-PIPE_FAILURE
### Response:
(Severity: 3), (Category: MGBL), (Description: This condition might result in failure of communication between two process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-CHILD_STOPPED
### Response:
(Severity: 3), (Category: IP), (Description: rlogin client application's child process was stopped abnormally), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_FIA_OFFLINE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Hard reset recovery action will not take place because FIA is offline.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKSTAT-4-PRI_URL_UNREACHABLE
### Response:
(Severity: 4), (Category: SNMP), (Description: The Collected Bulk data file could not be successfully transferred to the primary network management station address specified in the error message. This condition can occur because the primary network management address is not configured or the configured primary network management station address is unreachable. If a secondary network management station address is configured, the collected bulk data file will be sent to the secondary network management station address.), (Recommended Action: Ensure that the primary network management station address is configured. If the primary network management station address is configured, check the connectivity to the destination indicated by the primary network management station address specified in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_SIS-6-GENERIC_EVENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Service Interface Server related provisioning info.), (Recommended Action: No action is required. This is informational message for the process bring up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIB-3-NOINIT
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB library was not properly initialized by the SNMP agent. This is an internal software error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'passive' command under an IS-IS interface?
### Response:
The 'passive' command is used to configure an interface as passive, meaning it will not send or receive IS-IS packets. This is useful for interfaces that are not intended to form IS-IS adjacencies, such as those connecting to end hosts or external networks.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-HW_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The PLIM process failed to spawn as it could not access PLIM hardware during the initialization process. The process will not be re-spawned. The PLIM process is the driver for all PLIM hardware devices. %s - indicates the reason for the failure.), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error might be associated with larger system issues but its likely due to a hardware failure on the PLIM. Diagnostics should be exectuted on the PLIM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD_CLIENT-3-ERR_IPC_SEND
### Response:
(Severity: 3), (Category: ROUTING), (Description: AIPC ipc_sendv returns an unexpected error other than flow control.), (Recommended Action: AIPC return unexpected ERROR code. A chance of losing lsd information. Please collect show tech for mpls_lsd and aipc for further investigation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_SEND_PAK
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process encountered a software-error while sending the IS-IS packet.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_EA-3-PLATFORM_UPDATE_BULK
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while trying to update the platform code with information about a batch of interfaces. This update will be replayed.), (Recommended Action: The update will be replayed to the platform code and may succeed on a subsequent attempt. If not then the system will be left in an inconsistant state and the affected interfaces may not function normally. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-SOCKET
### Response:
(Severity: 6), (Category: IP), (Description: An error occurred whilst trying to open tcp socket.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ACTION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an registration error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to register gtrie. This condition indicates a problem where the gtrie registration processed by the software is failed.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_JBI-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message from the altera JTAG player, it indicates that something has gone wrong with FPGA programming.), (Recommended Action: File a DDTS)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-EVENT_CONN_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to create event connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SAM_CMD_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SAM command operation error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_SUPPLY-3-FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ClkCtrl has detected a power supply module has failed), (Recommended Action: Please replace the failed power module. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_CHAN_CON
### Response:
(Severity: 7), (Category: OS), (Description: LWM msg channel connect failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-POWER_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: SPA_OK and PWR_OK signal is asserted after the SPA is powered on by LC. These signals are deasserted when there is power failure on SPA and this failure indicates that it is SPA hardware issue. The SPA is put into FAILED state.), (Recommended Action: Contact TAC to diagnoise the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-PUF_READ_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This indicate a failure attempt to open timezone configuration file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-ALL_FANTRAYS_REMOVED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Two possibilities to this message 1) An alarm has occured. Software has detected that all fan trays have been removed from the chassisbut, but gives user 45 seconds to insert another tray. If no action is taken within 45 seconds, the chassis will be shut down. 2) A previously occured alarm has been cleared. Software has detected that all fan trays were removed which would have shut down the system. But one fan tray was put back within 45 seconds, thus removing the need to shut down the system.), (Recommended Action: Two possibilities to this message. 1) An alarm has occured : Insert a fan tray within 45 seconds. 2) A previously occured alarm has been cleared : *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA-6-INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_BFD_DOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: The BFD session for the specified interface destination went down. \ The first argument is the tunnel name. The second argument is the \ signalled name, and the fourth argument is Sub-LSP destination. The \ last argument is the list of RRO addresses. \), (Recommended Action: None. This is a solicited message (by 'logging events bfd-status' \ configuration under tunnel interface) and is informative only. \)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-STRING_SCALE
### Response:
(Severity: 7), (Category: OS), (Description: Internal debugging message.), (Recommended Action: Informational only. Indicates card has less system memory)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPENET-3-IO_PRIV
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The ethernet driver is unable to get the necessary privileges to perform an operation vital to its functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CALVADOS_DUMPER-6-HOST_COPY_FAIL
### Response:
(Severity: 6), (Category: INFRA), (Description: Dumper has failed to copy file from host to destination), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Collect this error message, along with the output of 'show tech-support ctrace'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-7-SVC_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: A service API debug is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-ADMIN_BATCH_CONFIG_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: Some admin configurations can not be handled correctly because: - invalid configuration - configuration can not be accepted at this moment), (Recommended Action: Use 'admin show configuration failed' to see all the failed configurations.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-BUS_OBJERR
### Response:
(Severity: 4), (Category: OS), (Description: Signal info), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_MA-7-INVALID_CAPS_STATUS
### Response:
(Severity: 7), (Category: QOS), (Description: The Afmon MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the AFMON MA DB. This could be the result of an incorrect operation in the'verify' phase.), (Recommended Action: Remove and reconfigure the service policy. If problem still occurs, please collect 'show tech-support performance-traffic' and contact Cisco technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-6-FABRIC_DISCOVERY
### Response:
(Severity: 6), (Category: FABRIC), (Description: This is to give infomation regarding fabric card type.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-4-TYPE6_MASTER_KEY_UPDATE
### Response:
(Severity: 4), (Category: SECURITY), (Description: TACACS configs are migrating due to change in the Type6 Master key. TACACS configs will not work during this migration.), (Recommended Action: This is just a warning message and No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-6-STATPORT_MAP
### Response:
(Severity: 6), (Category: SERVICES), (Description: The static port mapping requested has succeeded.), (Recommended Action: This is a success message and used to inform the user about the outside ipaddress and port number mapped to the inside address and port number.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVC_EVM_HANDLER
### Response:
(Severity: 4), (Category: L2), (Description: During initialization, PPP MA failed to register for input or output notifications for the specified service. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-RSI_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Failed to initialize RSI global client library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_DRIVER-3-JID_GET_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: process's JobID can not be obtained), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-FAILED_ISSU_OPERATION
### Response:
(Severity: 3), (Category: INSTALL), (Description: Fabric claiming that there is no sufficient plane to proceed ISSU operation. This is because any one of the plane is not in up state. Afte trying for maximum retry (1) it aborts the issu operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_ETH_MGMT-3-INVALID_VFT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error detected when initializing the eth mgmt netio. netio driver vft type should not be a null parameter. process will restart automatically to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-7-GENERIC_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The message is used to report generic info about Services PLIM driver.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MCAST_PAGE_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multicast page error on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the shared plane in IOS XR configuration?
### Response:
The shared plane in IOS XR is used to configure routing protocols, routing policies, and other system-wide configurations that are shared across all nodes in the system.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2TP-6-PACKET
### Response:
(Severity: 6), (Category: L2), (Description: A packet is delivered to local L2TP stack, but it is meant for a different version of L2TP protocol), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-SHMEM_OPEN_FAIL
### Response:
(Severity: 3), (Category: L3), (Description: The IPv6 Neighbor Discovery (ND) spoofing process (ipv6nd_lite) has failed to open a shared memory region required for communication with the main ND process (ipv6_nd). This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart. The error may result from a shortage of resources such as memory.), (Recommended Action: It may be possible to recover by restarting the ipv6nd_lite process. Use the <CmdBold>show memory summary [location <node-id>]<noCmdBold> command to determine the state of system memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_BBA_CONFIG
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA received an unexpected config-value for a piece of BBA-group config through SysDB. The error message describes which config item was invalid. The most likely reason for this a programming error in the verifier for the config item.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_STR_RT_ACC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, Access error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_T3E3-3-FAREND_REQ_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This error message indicates that the SPA detects farend failure.), (Recommended Action: Collect the trace log via 'show plim t3e3 trace error location all' 'show plim t3e3 trace info location all' 'show logging location <>' and collect console logs and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-2-RSI_INIT_FAILED
### Response:
(Severity: 2), (Category: OS), (Description: Failure encoutered when initializing the RSI for Port Arbitrator.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_6_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_HALT_VIA_CPLD
### Response:
(Severity: 1), (Category: FABRIC), (Description: The specified device could not be halted using the CPLD register. Use the fabric ASICs internal register to halt the device. This message is meant to catch specific hardware failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CRRS4_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver version is not compatible with the hardware version.), (Recommended Action: Upgrade the Port controller FPGA image using the FPD procedure, followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-MSGREPLY_CONFIRMED
### Response:
(Severity: 6), (Category: OS), (Description: Reply to client could have been missing, so did reply at the end.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF_CL-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when calling debug_register() function.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-TIMER_INIT
### Response:
(Severity: 3), (Category: OS), (Description: A call to the rt_check timer init routine failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP_OFFLOAD-4-STATS_DROP
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An error was encountered while attempting to deliver statistics to the Prescision Time Protocol (PTP) protocol. This is a transient problem from which the system should recover, but some PTP statistics may be incorrect. This may indicate the system is under unusuallay high traffic load.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_UCORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE uncorrectable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-MMAP_PEER_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error when mmap to a peer process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin <win_id> participant list - show process all - Check whether the process with the pid exists in the router - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-MEMORY
### Response:
(Severity: 7), (Category: INSTALL), (Description: The system is running out of memory and was not able to allocate sufficient memory to carry out an install-related operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LS_LFI_FRAME_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a lfi frame error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-2-IMA_DISK_CORRUPT_CHUNK
### Response:
(Severity: 2), (Category: MGBL), (Description: A failure occurred during Runtime integrity validation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMLOG-3-HEADER
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected value was found in the header. This might indicate a buffer overflow), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-IFCACHE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred in MRIB interface cache operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-2-ERR_IFH_STS
### Response:
(Severity: 2), (Category: L2), (Description: Error in gatm operation. This gatm operation message basically denotes the shim update failure. ifh and rc are ifhandle and return codes in hex.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-INTERNALERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-DB_IDPROM_READ_FAIL
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has failed to read the daughter card IDPROM This will prevent the following driver process to behave in a wierd manner - fia_driver in XR LXC), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_SET
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the item does not exist or has the wrong type. The details are in the error string.), (Recommended Action: Check that the item to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_SVR-7-INIT
### Response:
(Severity: 7), (Category: OS), (Description: A failure occurred during the initialization of the Cerrno Server process), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-RECONF_VL
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPF process is being reset, and it is going to select a new router-id. This will bring down all virtual links. To make them work again, virtual link configuration needs to be changed on all virtual link neighbors.), (Recommended Action: Change virtual link configuration on all the virtual link neighbors, to reflect our new router-id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE3_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE3_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_AHS_LOS_LANE3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-NO_DRIVERS_FOUND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No device driver is found for the device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-XAUI_1_FRAG_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported fragmentation error on TX side on bridge instance - 1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering auto-tunnel backup feature?
### Response:
The MPLS traffic engineering auto-tunnel backup feature allows point-to-point backup tunnels to be created dynamically to protect MPLS TE tunnels and the IGP against link and node failures. Backup tunnels are created for neighboring routers and provide fast reroute protection. It is enabled with the mpls traffic-eng auto-tunnel backup command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-CLOCK_UPDATE
### Response:
(Severity: 5), (Category: IP), (Description: When there is an update via NTP to the clock, step/panic or init.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install update command in IOS XR?
### Response:
The 'install update' command is used to update the active software set to a newer version. It performs the necessary checks, activates the new packages, and commits them as persistent.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-4-BACKUP_LOG_RENAME_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the NPU Driver to indicate that it failed to take npu lof backup file from specified src path and dst path.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-5-INFO
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message logs an informational message.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-6-TFTP_SEND
### Response:
(Severity: 6), (Category: MGBL), (Description: An informational alarm upon dumping of the collected data on to tftp server.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-3-ERR_CCI_CREATE_Q
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot create pdma queue required. Likely a asic driver does not come up properly %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %d - number of seconds elapsed), (Recommended Action: Investigate if driver processes(ingressq, egressq or fabricq) initialized properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-5-LOG_NOTICE_OWNER_PLANE
### Response:
(Severity: 5), (Category: OS), (Description: A notice owner plane message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_4_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-MAC_SEU_UNCORR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a Multi Bit Error or CRC or uncorrectable Single Bit Error for this device), (Recommended Action: Please try to correct the problem by reloading the board using command 'admin reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-EVENT_MGR_DEBUG_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The tftp server event manager which handles the debug services failed.), (Recommended Action: The CE-TFTP server process will exit and respawn itself. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_TS_CORE_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-1 timestamp core error on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STREE-4-SET_MACADDR_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: MAC address assigned to the spanning tree was either invalid or was not able to be set for the spanning tree instance. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.), (Recommended Action: Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This may be a serious failure, however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Give CLI: If it is still getting operational failure, perform RSP switchover or card reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-6-MUTEX_DESTROY
### Response:
(Severity: 6), (Category: HA), (Description: An attempt to destroy a Mutex has failed, this message is not harmful and its informational only.), (Recommended Action: Please collect console log of this message and contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens if you try to upgrade an IOS XR router with a different set of packages than what is currently installed?
### Response:
When upgrading an IOS XR router, all the PIEs specified in the install command must match the packages already installed on the router. The upgrade is not allowed by Install Manager if you try to upgrade with a lesser number of packages than those installed. However, it is possible to install additional packages that currently do not exist within the same install operation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-CALL_SADB_UPDATE
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: A VPDN CALL's Subscriber Attribute Database parameters were not updated. This may affect accounting and show commands.), (Recommended Action: Clear the subscriber and allow it to reconnect. If the problem persists, contact technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-QSM_ADD_SERVICE_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: QSM publish dumper path failure. Dumper relies on qsm to publish symlinks. It might impact dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLEAR-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to set the value in the specified path'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-LWM_CLINFO_LEAK
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: NetIO was unable to cleanup LWM related clinfo which would cause leak in netio.), (Recommended Action: Please collect the required_info logs for DEs to debug this further. This is a leak in netio so should not cauase any functionality impact immediately, later it might cause netio crash. And post that system should recover by its own. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EXIT_ERROR
### Response:
(Severity: 3), (Category: HA), (Description: resmon process exited), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_9_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-7-ERR_DEBUG_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver was unable to initialize debug. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath as-path multipath-relax' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath as-path multipath-relax' command allows load balancing over paths that have different AS paths. By default, BGP only installs multiple paths in the forwarding table if they have the same AS path. This command relaxes that requirement, allowing multipath load balancing over paths with different AS paths as long as they are equal cost paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-4-AUTO_UPGRADE_NON_EXISTANT_REF
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: A satellite has auto-upgrade configuration which refers to the named reference, but this cannot be read.), (Recommended Action: Create the reference or remove the auto-upgrade configuration)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PACKET_REGION_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Unable to define the packet in the mentioned pool types.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_2_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB-3-GEN_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to do DLL operation), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_15_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-7-BSD_DEBUG_MSG_V2
### Response:
(Severity: 7), (Category: IP), (Description: Displays the debug msgs as they happen), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-7-CANT_ENQUEUE_ECHO_REPLY_FOR_TX
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This indicates failure to enqueue echo packet for transmission and due to low memory on node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_OPTICAL_PWR_OVERLOAD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an MPLS L3VPN instance?
### Response:
To configure an MPLS L3VPN instance, define the VRF and associate it with an RD and RTs. vrf MyVRF
rd 65000:100
address-family ipv4 unicast
import route-target 65000:100
export route-target 65000:100
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_MQ_PKT_LEN_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 1 MQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INVALID_MPLS_LABEL
### Response:
(Severity: 4), (Category: ROUTING), (Description: ISIS tried to send an invalid MPLS label to the RIB or LSD), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens to the configuration when you replace a node with a higher or lower density node in IOS XR?
### Response:
When replacing a node with a higher density node, IOS XR retains the existing configuration and applies it to the new node. When replacing with a lower density node, the configuration for the interfaces that no longer exist is automatically removed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MAC-4-NP_TX_FIFO_RECOVERY_SUCCESSFUL
### Response:
(Severity: 4), (Category: L2), (Description: An inconsistency in the NP Tx FIFO was detected. The system has automatically recovered from this condition. A brief interface flap is expected as part of the recovery sequence.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA_BASE-7-DEBUG
### Response:
(Severity: 7), (Category: SECURITY), (Description: Informational log only), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPP_PKT_F1_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 1 single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-SD_INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: CGN_MA failed to register with SD. The process will be restarted under this scenario.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-5-_OOR_GREEN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Device has come out of severe resource constraint state), (Recommended Action: Please collect the OFA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LAMPTEST-6-INITIATED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Test of all system LEDs is now in progress.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_LASER_EOL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV6_EA-3-ERROR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_LTRACE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize ltrace. This would prevent process from receiving traces.), (Recommended Action: A process will be initiated by the software. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-PEX_FATAL_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC FPGA detected fault on the PCI Switch device. This is an indication that one of the PCI Switch Port detected a Lane Down or Fatal Error condition. This can result in card going to POWERED_OFF state if the fault is persistent.), (Recommended Action: Try reloading the card using 'hw-module location <> reload'. If multiple card reload operation cannot fix the problem, check if physical OIR can address the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-LINUX_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_DEBUG_INIT_EVENT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an error to initialize debug facility and hence failed to initialize. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_CRC_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Decoder A CRC error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-ERR_SYSDB_DISCONNECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospfv3_uv process was unable to unbind from SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_STR_NEGO_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, expected error information in case of transition between CDSTV/CDSIS and CGV6 roles on an ISM LineCard.), (Recommended Action: Please collect the console logs and following CLI output <RP> show platform show platform summary location <ISM Node> show running-config | i hw-module service show install active show install inactive show services role location <ISM Node> show services role registered show services role trace agent location <ISM Node> show services role trace server location <ISM Node> </RP> If the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARBMGR-4-MBI_BOOT_HOLD
### Response:
(Severity: 4), (Category: OS), (Description: An MBI boot hold has been introduced to allow the other RP to boot first to give it the opportunity to become the active RP. This is because this RP has had multiple ungraceful resets in the last two hours which could be preventing the router from being stable.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How are BGP speaker processes placed on different nodes with the BGP Distributed Speaker feature?
### Response:
BGP speaker processes are placed on different nodes using the 'placement' command in router BGP configuration mode. The 'placement' command allows specifying the node locations where BGP speaker processes should run, and the maximum number of speaker processes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ERR_DUPID
### Response:
(Severity: 6), (Category: ROUTING), (Description: IS-IS has received an IIH from a router claiming to have the same System ID as either the local system or another station on a LAN interface. The message indicates the interface and, in the case of a LAN interface, the SNPA from which the IIH was received. It also indicates whether we ourselves use this system ID, or the SNPA of the other station using the system ID.), (Recommended Action: Duplicate system IDs are usually the result of misconfiguration or a bridging loop in the network. Configure each router with a unique system ID, and ensure that there are no bridging loops in the network.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-6-ERR_SYSDB_EDM_REG
### Response:
(Severity: 6), (Category: L2), (Description: The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-REPOPULATE_SHADOW_FAILED
### Response:
(Severity: 4), (Category: MGBL), (Description: Configuration accepted by the actual verifier processes was rejected when writing it into the shadow namespace.), (Recommended Action: The Central Configuration Validator (CCV) will attempt to repopulate the shadow namespace again after the next commit, and will report a further message indicating any further failures or reporting that the repopulation was successful.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-CONFIGURED_SESSIONS_LIMIT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the number of sessions have reached the configured session limit. New sessions will not be allowed.), (Recommended Action: Change the configuration and install more licenses or move a license from another line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-3-MUNMAP
### Response:
(Severity: 3), (Category: OS), (Description: The munmap() failed in mmap_peer_local.), (Recommended Action: Copy the message exactly as it appears, and report it your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-CHAN_CONN
### Response:
(Severity: 3), (Category: OS), (Description: A call to a LWM API failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_CORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory correctable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-NRS_SEARCH
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses NRS API to search nrs class nrs_search API in NRS library failed.), (Recommended Action: This is a debug message.No Action required. If problem persists,Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-IKEINIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: An IKE initialization error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB_CLIENT-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: L2RIB client library couldn't allocate memory.), (Recommended Action: Check memory utilization on the card the error came for and take appropriate steps to reduce it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_8_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPFPGA-3-INTERLAKEN_RX_SIDE_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Interlaken Rx is not synced. fault is detected/cleared on DPFPGA.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-4-SR_POLICY_BURST_INTERVAL_STRETCHING_ACTIVE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The requested PPS of SR Policy delay measurement sessions is more than can be supported. The configured burst interval will be increased to ensure probe packets sent per second do not exceed the maximum allowed PPS. The SR_POLICY_BURST_INTVL_STRECTHING_INACTIVE syslog will be issued once this condition is cleared.), (Recommended Action: Configure a larger SR Policy delay measurement burst interval.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-SYNC_RESP_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSA-6-PROV_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates success of slice provisioning), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-XFP_OIR
### Response:
(Severity: 6), (Category: L2), (Description: The Optic Interface Module (XFP) for the specified port has either been inserted or removed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-CE_TFTP_EXIT
### Response:
(Severity: 3), (Category: IP), (Description: The tftp server process will exit, since it fails to receive data from a remote client due to restart of mqueue process.The process will respawn itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ECM_NOTIFY
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemaon was unable to set up ecm notify.), (Recommended Action: Collect the required info and contact T/AC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM_CLIB-3-MSG_INVALID_REG
### Response:
(Severity: 3), (Category: IP), (Description: A client registration on a Linecard returned error due to invalid parameter.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_LIB-3-ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The specified operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-BMP_ADDROUTE
### Response:
(Severity: 2), (Category: ROUTING), (Description: An error occurred whilst trying to insert a net to the BGP table database.), (Recommended Action: 'This error occurs when we are not able to add a net to the BMP table' 'database. In some cases the nbr that had sent that net would reset ' ' and the issue would recover. In other cases you might see an ' 'accompanying low memory message. Please check to make sure you have ' 'enough free/available memory on the router. ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-PREFIXES_BELOW_THRESHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: The route prefix table is no longer considered full. This warning is generated after a full route prefix table frees off some route prefixes.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL-3-MA_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred in rpl_ma thread code.), (Recommended Action: Try restarting the rpl ma process using the 'process restart ipv6_rpl_ma' cli. If problem persists contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECY_DRIVER-1-PS_BUFFER_OVERFLOW_DETECTED
### Response:
(Severity: 1), (Category: L2), (Description: Secy Driver has detected a Packet Store Overflow in the Chip. This is usually due to unshaped traffic or Bursty traffic from the Peer side. This could lead to traffic drops.), (Recommended Action: Analyze the Peer traffic pattern and avoid sending bursty traffic.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-STANDBY_SYNC_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: STP running on a Standby card was unable to synchronize its state with STP on the Active card. The Standby process will restart to attempt to resynchronize fully. This should only impact the Standby node, and traffic should remain unaffected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_BRIDGE_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Bridge driver subsystem initialization error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTH_SRV-3-ERR_2SL_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: auth srv exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-INVALID_PW_XID
### Response:
(Severity: 4), (Category: PLATFORM), (Description: received zero pw xid for add/modify/del events for EOMPLS.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTEG_SWITCH-5-LINK_SHUT_DOWN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The inter-rack switch port was administratively shut down.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-EOD_SIGNAL_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'signalling EOD update from AIB failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-3-NETIO_OUTPUT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The fr_socket process failed to send packet out to Netio. There could be an eror in marking priorities of the packets.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-6-NETIO_DOWN
### Response:
(Severity: 6), (Category: OS), (Description: Pre-IFIB process can't establish connection to NetIO.), (Recommended Action: This could be an intermittent issue and the netio will comeup after sometime. If the issue is still seen try restarting netio and lpts_fm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INFRA_MSG-5-CLOCK_TIME_UPDATE
### Response:
(Severity: 5), (Category: INFRA), (Description: System clock changed), (Recommended Action: NONE)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-SET_MAPPING_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-NETLINK_UNKNOWN_REPLY_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: The process received an error from the kernel with a non-zero sequence number, indicating the error was in response to a specific query. The process was unable to look up the query responsible, and so was unable to handle the error automatically.), (Recommended Action: If the problem persists, restart the process. If the problem persists through process restarts, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_RESTART_NAME
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: The server has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-2-PORT_HARDWARE_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Software declared hardware fault on the specified port after the number of auto-recovery attempt exceeded the threshold value 3. The port will be set to UDLD err-disable state until manually cleared. The fault could be hardware issues or connection problem.), (Recommended Action: Check the link on which the error happened. Try replacing/reconnecting the GBIC/SFP/cable at either end of the link. If the fault is at inter-RP link, try physical OIR. Clear error-disable and re-enable the port on the RP and see if the port comes up. If the port doesn't comeup collect 'admin show tech-support control-ethernet' log and contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-INTERNALERR
### Response:
(Severity: 4), (Category: INSTALL), (Description: An internal software error occurred.), (Recommended Action: This internal error will be recovered automatically. Please check the error message for details about the error and take corrective actions if necessary and retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TCGETATTR_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ bias greater than or equal to the high bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_14_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-3-EVM_PROC_READY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The system manager did not accept the proccess ready that the rpl multi-version coordinator tried to post. The coordinator will exit so the system manager can restart it. Route policy may not be operational until this is resolved.), (Recommended Action: This error message may be transient. Restart policy_repository and try the use case again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
flash_platform-7-GET_DEVICE_DETAILS_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Get the Model ID of the device. This message occurs when the platform unbale to get the model id of the corresponding device.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_CORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE correctable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_DBG-3-ERR_INFO_VERBOSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error occurred in FIB engine layer for collecting traces. The message string indicates the reason for the failure. This message also provides an error code. Additionally, it provides a more verbose information of the error.), (Recommended Action: This message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_RIB
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the RIB client library. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the RIB, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ENTITLED_SESSIONS_LIMIT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the number of sessions has reached the limit of the licenses available. New sessions will not be allowed), (Recommended Action: Install more licenses or move a license from another line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-MUTEXLOCK
### Response:
(Severity: 3), (Category: IP), (Description: A mutex lock/unlock problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_TMF_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised possibly due to incorrect internal BITS transmitter configuration.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel backup feature?
### Response:
The MPLS TE auto-tunnel backup feature enables the automatic creation of backup tunnels to provide fast reroute protection for MPLS TE tunnels and the IGP against link and node failures. Backup tunnels are created to next-hop routers and activated when the protected link or node fails.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-7-EVM_CREATE_FAIL
### Response:
(Severity: 7), (Category: IP), (Description: The socket library failed to create event manager.), (Recommended Action: If the error message indicates low memory, do the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. For any other errors, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-6-VOLTAGE_VALIDATED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: voltage validation succeeded), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure SSH access?
### Response:
To configure SSH access on Cisco IOS XR, generate RSA keys and enable SSH on the vty lines. RP/0/RP0/CPU0:router(config)#ssh server v2
RP/0/RP0/CPU0:router(config)#domain name example.com
RP/0/RP0/CPU0:router(config)#crypto key generate rsa
RP/0/RP0/CPU0:router(config)#line vty 0 4
RP/0/RP0/CPU0:router(config-line)#transport input ssh
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_EA-3-LINK_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error occurred while attempting to program HW for IPSec SVI on specified node. The interfaces will not come up. If there is a standby node configured for the interfaces, they may come up on the standby.), (Recommended Action: It may help to shut down, then bring up, the IPSEc SVI interfaces in question.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_8_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LMRIB_API-3-LWM_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred in lmrib client lib. This is to indicate that lmrib_flush did not complete.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show lmrib client trace <name-of-the-client><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-3-DEBUG_REG
### Response:
(Severity: 3), (Category: L2), (Description: debug_register() call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-DEV_CFP_OPTICS_PORT_UNSUP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A CFP Module not supported for the port error was detected during CFP initialization. A CFP Module not supported for the port error is reported when Optics is not supported on the port. The CFP is the pluggable optics on the line cards. CFP initialization may happen when linecard boots up, CFP OIR and line card process restart. Traffic will not be impacted by this error.), (Recommended Action: Verify that the CFP Module is supported for the port. Replace the CFP with a working one (if any) to isolate bad optics. Check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the command 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_EPRC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ePRC.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Trying to use uninitialized debug events), (Recommended Action: Try to use initialized debug events)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-2-INVALID_VERSION_V2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'V2 power module in a V3 chassis'), (Recommended Action: Replace the V2 power tray and power modules with a V3 power tray and power modules.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL_DLL-3-MSG_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in Ether-ctrl process. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. The process can continue functioning as expected despite the failure.), (Recommended Action: Collect console log and the following information. - sh platform - sh version - sh install summary If 10GE linecard, - sh processes ether_ctrl_lc_10ge location <> - sh ether-ctrl tenGigE trace location <> If 1GE linecard, - sh processes ether_ctrl_lc_ge location <> - sh ether-ctrl gigabitEthernet trace location <> If the process is non-operational, try doing from the admin mode process restart ether_ctrl_lc_ge location <> if 1GE process exited or process restart ether_ctrl_lc_10ge location <> if 10GE process exited. If the issue persists, please contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_PIFIB-4-WARN_V4
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PLATFORM PIFIB, warning), (Recommended Action: This error is expected since the scale being configured is not supported. All the LPTS TCAM entries has been exhausted, no more new configuration can be programmed in hardware. Please collect 'show tech-support lpts' and 'show console logging' output. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-ERR_MEDIA_REGISTER
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: netio media register or callback error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AMT-3-SYSDB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_RESOURCE_FAIL_4
### Response:
(Severity: 3), (Category: IP), (Description: The LMA could not allocate an IPv4 or IPv6 address to the MN or Logical-MN.), (Recommended Action: Check if the Mobile Node and/or Mobile Network pools configured on the LMA are sufficiently large. If the MN or Logical-MN requests static IPv4/IPv6 addresses, then check if they fall within the configured pools. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BMP-3-DLL_TRACE
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
protect_debug-3-GSP_MTU_OVERFLOW
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The PFI Protect Event delivery failed due to message size being greater that PD capability. This error occurs when GSP provides MTU larger than that supported by PD capability.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-SYSDB
### Response:
(Severity: 3), (Category: MGBL), (Description: A SysDB operation carried out by the HTTP Server returned unexpected results.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-3-AAA_SESSION_CLEANUP_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: A call to AAA to remove subscriber session state has failed. The error may cause the LCP session on the subscriber interface to be left permanently in what should be a transient unnegotiated state.), (Recommended Action: To remove the stale sessions, run clear subscriber for this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-UNSUPP_TX_NON_CH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects an unknown error on a pod. The pod might not be functioning properly, and can cause cell drops, or corruption from received cells. There can also be a software bug such that the error is not handled), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-STANDBY_CONNECTION_UP
### Response:
(Severity: 6), (Category: HA), (Description: RMF has determined that the connection to the standby card has been succesfully completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a GRE tunnel in IOS XR?
### Response:
To configure a GRE tunnel, use the 'interface Tunnel' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#interface Tunnel0
RP/0/RSP0/CPU0:router(config-if)#tunnel mode gre ipv4
RP/0/RSP0/CPU0:router(config-if)#tunnel source GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-if)#tunnel destination 192.168.2.1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-CREATE_CHUNK
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to create chunk memory for its domain name, domain address and domain alias data structures. The message would appear during initialization of DNS process (i.e. domain_services).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_PHASE_INFO
### Response:
(Severity: 6), (Category: INSTALL), (Description: After an ISSU operation was initiated, the install infrastructure goes thru internal sub phases. This message indicates that a particular sub phase is done and within install infrastructure the next phase is being waited for.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-TLU_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Shared memory initialization has failed for TCAM), (Recommended Action: No action is required. Process will be restarted.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-AREA_DELETE
### Response:
(Severity: 6), (Category: ROUTING), (Description: The configuration command could not be accepted because OSPFv3 is in the process of deleting the specified area. Try again later.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_LIB-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TGN-7-OPERATION_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key characteristics of the Group Services Protocol (GSP) IPC?
### Response:
GSP is a connectionless asynchronous multicast-based IPC mechanism. Key characteristics include\n- Uses publish/subscribe model - senders and receivers join multicast groups\n- Supports one-to-many communication efficiently\n- Sender not blocked, leading to higher throughput\n- Messages can be sent to all group members or a filtered subset\n- Reliable delivery with ack/nack from receivers\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-FEC_DEL_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to destroy IPMC fec), (Recommended Action: Please collect below CLI outputs, (show logging), (show dpa trace loc <>), (show dpa objects all location ?), (show mfib hardware trace all location ?), (show dpa objects ipmcroute location ?), (show controller fia trace all reverse location ?), (show controllers fia trace brcm-error reverse location ?), (show controller fia trace brcm-sdk reverse location ?) Report to your technical support representative for further details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSCMIB-4-CSC_ASSERT
### Response:
(Severity: 4), (Category: SNMP), (Description: An invalid codepath has been encountered - the process is exitting and restarting.), (Recommended Action: This error will be recovered automatically after the process restarts. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_SCH_LIB-2-CONNECT_NODE_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message signifies that the DLL can not longer receive any event messages from the platform process in the router.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-AGENT_REG_FAILED
### Response:
(Severity: 3), (Category: LICENSE), (Description: Smart Licensing registration failed. This may have caused due to invalid idtoken used during registration or network connection failure to cisco.com.), (Recommended Action: Please check the smart agent syslog messages for additional information. Please turn on smart agent debug mode (CLI command: license smart debug enable) and retry for more detailed information. Finally, please check your smart agent Call Home settings, your network connection with Cisco and if the ID token you used for registration is valid.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-6-CAC_DROPS
### Response:
(Severity: 6), (Category: SECURITY), (Description: Call admission control policy is configured on the device. Consequently an IKE SA request was denied due to the reason described in the error message.), (Recommended Action: 'Depending on the reason that the request was denied, either reduce the load on the system so that it can handle new IKE SA requests, or increase the maximum allowed IKE sessions if more are needed')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-6-ERR_EVC_DESTROY
### Response:
(Severity: 6), (Category: L2), (Description: During process termination SSRP failed to destroy a connection to a service provided by another process. This is an internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_STATE_UP
### Response:
(Severity: 6), (Category: L2), (Description: The BFD session is now up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-BUNDLE_COMPATIBILITY
### Response:
(Severity: 5), (Category: L2), (Description: A configuration change has meant that a bundle now has incompatible configuration. All links have been disabled. The reason for the incompatibility at the time of raising the alarm is supplied in the message.), (Recommended Action: No action is required; however, the bundle will remain inoperative until the configuration incompatibility is cleared.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_LOCAL_REG_WRITE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected a local register write error.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_UNKNOWN_MEDIA
### Response:
(Severity: 4), (Category: ROUTING), (Description: This interface media is not supported by IS-IS. An IS-IS process restart is required for recovery.), (Recommended Action: Check the interface media name in the configuration and restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-5-SECURITY_IPSG_VIOLATION_AC
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_PD-3-ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFD PD encountered an error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Collect console log and the following information and contact TAC support with this info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - show tech-support routing bfd - show bfd all - show bfd all location <> - show bfd session detail - show bfd session detail location <> - show uidb data location <> <interface name> ingress - show uidb data location <> <interface name> ing-extension)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_MAC_SIZE_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MAC address size returned for the specified interface does not match the expected size (6 bytes). This can be caused by a faulty hardware.), (Recommended Action: Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_FWD-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some requested operation failed. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-4-INVALID_MAC
### Response:
(Severity: 4), (Category: L2), (Description: PLIM driver was unable to get a MAC address for the interface.), (Recommended Action: Check if the process 'shelfmgr' is up and running on the RP. Try to reload the LC to see if that helps. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA-4-WARN_INVALID_RANGE
### Response:
(Severity: 4), (Category: L2), (Description: The range of available MAC addresses supplied by the platform is invalid. A zero size range will be used, resulting in any MAC address requests from client features being rejected.), (Recommended Action: First ensure that the backplane is correctly programmed and reprogram if necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APIV-5-API_INCOMPATIBLE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The APIV module message version negotiation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Cisco IOS XR microkernel architecture?
### Response:
The Cisco IOS XR microkernel architecture is designed to provide a highly modular, scalable, and resilient operating system. It keeps most OS functionality outside the kernel in separate processes with protected memory spaces. This enables fault containment, process restartability, and minimizes service disruption due to process or kernel failures.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FAN_MFGMEM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Fan Manufacturing Data Memory (EEPROM) Failure (SAT_FAN_MFGMEM) alarm is raised when the fan-tray assembly manufacturing data memory (or EEPROM) fails.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UTIL_CHKPT-4-NDT_DATA_LOST
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Data might have been lost for the feature associated with this process and hence the information on the Standby RP (or V2 during an ISSU) may be inconsistent with the master copy of the data for this feature.), (Recommended Action: The user may wish to reload the Standby RP (or abort the ISSU if in progress). Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_PIDB-4-OPEN_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to open a above mentioned file on the linecard. The reason for the error is dispalyed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP_TEST-3-INTERNAL_ERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: This is an internal software error in snmp test.), (Recommended Action: 'Delete and add snmp config ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-CARD_UPD_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: Roddick was not updated with change in vrf db.), (Recommended Action: This is a serious error and cgn_ma process has to be restarted. If the issue persists, collect MA traces and contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-6-HW_UT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Message send has failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-GS_VECTOR_INIT_FAILURE
### Response:
(Severity: 3), (Category: HA), (Description: Initialization of gs vector failed.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-5-INIT_PEER_UP_DOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: This is a notice saying that the MSDP Peer UP/DOWN.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_PRINT_TIME_TYPE
### Response:
(Severity: 7), (Category: MGBL), (Description: Printing type of time (BCD/Binary).), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-RESOLVE_CLUSTER_PARITY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERRSTR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-ENFORCE_OOC
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is enabled without appropriate licenses.), (Recommended Action: The customer should either purchase more licenses or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-EMPTY_PATH
### Response:
(Severity: 4), (Category: OS), (Description: A server process has registered empty path name with the path manager without specifying _RESMGR_FLAG_FTYPEONLY flag. This may lead to undesired behaviour like receiving requests intended for some other server process (when the other server process is restarted).), (Recommended Action: This is an internal error and should be reported to TAC. The application process making the call might have passed incorrect path name.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_THREAD_MUTEX_UNLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to pthread_mutex_unlock() was unsuccessful'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-POLICY_EBGP
### Response:
(Severity: 4), (Category: ROUTING), (Description: A policy attached to an eBGP neighbor performs operations that are illegal for eBGP routes, such as modifying the local-preference.), (Recommended Action: Modify the policy to avoid the prohibited operations.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_DUPLICATE_L2_L3_ADJ_SID
### Response:
(Severity: 3), (Category: ROUTING), (Description: Same SR Adj-SID is configured as L2 and L3 Adj-SID..), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ATM_V2-4-DRIVER_WARN
### Response:
(Severity: 4), (Category: L2), (Description: ATM SPA OC3/OC12 driver warning messages), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-PROBE_TRACKING_LIMIT_HIT
### Response:
(Severity: 4), (Category: INFRA), (Description: SLA has a limit on the number of packets in a probe that have been tracked as sent, but for which no result has been returned by the protocol. Once this limit is hit, further packets in the probe are not marked as sent, and will eventually be marked as lost (timed out). This error can only occur for probes containing a large number of packets. It may be triggered by network problems, where all SLA packets are being dropped.), (Recommended Action: The system may recover automatically. If the problem persists, check for network connectivity problems. The problem can be avoided by using shorter probes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV6_EA-3-COMMUNICATION_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An unexpected communication error has occurred in the IPv6 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-CORE_MD5
### Response:
(Severity: 6), (Category: OS), (Description: Keep core file md5 information to identify later file corruption.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VLAN_EA-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: VLAN-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-INVALID_TUNNEL_RTR_ID
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPF has received a Tunnel update from Traffic Engineering module for a router ID 0.0.0.0. Since this is an invalid router ID for a Tunnel, OSPF ignores this update. This indicates that there could be a possible error in the computation or notification of Tunnel update from Traffic Engineering to OSPF module, or a problem in the interface between the two modules. OSPF ignores the update. However this could result in some stale Tunnels remaining under OSPF and OSPF using those Tunnels as nexthop or OSPF missing new Tunnel updates from the Traffic Engineering module.), (Recommended Action: Investigate if there is any traffic loss or if a Tunnel is not being used for a traffic flow. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show tech-support routing ospf - show tech-support mpls traffic-eng)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-6-SOCKET_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Socket info), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-ERR_MSG_REPLY
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPF failed to reply to its client through message channel. This could be a result of channel down or resource allocation failure.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the OSPF process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-4-ENS_CONSUMER_RESPONSE
### Response:
(Severity: 4), (Category: INSTALL), (Description: Insthelper failed to respond to instdir. Instdir will notice this and, after a timeout will attempt to re-retrieve the response from insthelper.), (Recommended Action: Instdir will attempt to re-retrieve the response from insthelper after a timeout. If instdir successfully retrieves the response from insthelper after retries, no user action is required. If the recovery doesn't work please contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-LIB_SENT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager DLL encountered an error due to internal software issue and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_AHS_LOS_LANE2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-SYSDB_BIND_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The show line command was unable to bind to SysDB to retrieve the information required.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_MAC_IWF_IF_SES_THRSHLD_EXCD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address on the given access interface has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_SVR-7-EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error (other than EINTR) occured in the event loop. The process must exit.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-ISSU_OP_ABORT_FABRIC_REMOVED
### Response:
(Severity: 2), (Category: INSTALL), (Description: During ISSU operation, the specified fabric node removal was detected by the install ISSU infrastructure and thus the current ISSU operation is aborted.), (Recommended Action: Please ensure that the fabric node is not removed during ISSU and retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-5-VERIFICATION_UNREGISTER
### Response:
(Severity: 5), (Category: MGBL), (Description: The TTY Management Commands is unregistering sysdb verification), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-REGISTER_DEBUG
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to register for notification of changes to the domain_services debug flag(s).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-3-UNKNOWN_EVENT
### Response:
(Severity: 3), (Category: L2), (Description: An unknown event was received), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Chassis Control driver process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPENET-4-MEDIA_RATE_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Can't set media rate to this speed, setting it to 1GBits/sec), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-MGR_ALLOC
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The VPDN MGR process has failed to allocate memory. This may be due to low memory conditions on this particular RP, or VPDN Manager may be user more memory than it is allowed.), (Recommended Action: Reduce system scale.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-PSK_KEYCHAIN_NO_ACTIVE_KEY
### Response:
(Severity: 5), (Category: L2), (Description: A MACsec keychain can have multiple pre-shared keys (PSK), each configured with a key(CKN), key-string(CAK) and lifetime, A key lifetime specifies at which time the key expires, key without lifetime is invalid.), (Recommended Action: Check the keychain configurations for MACsec, make sure to have valid lifetime configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SSP_INTR_SFIFO_FULL_IF0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SSP_INTR_SFIFO_FULL_IF0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-SAVED_RESET_DEBUGS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Reset debug information are saved in the indicated file.), (Recommended Action: If this error persists, please collect the file shown in the message and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-SPAWN
### Response:
(Severity: 3), (Category: IP), (Description: The XR socket library encountered an error with socket inheritance while trying to launch a new process. The child process may not have been launched at all or may be launched but fail to correctly inherit any sockets.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-MPA_OIR_QUICK_BACK_TO_BACK_ERROR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The OIR operation was performed quickly. Recommendation is to wait for two minutes before doing next MPA OIR.), (Recommended Action: Recommendation is to wait for two minutes before doing next MPA OIR. If the issue occurs under other conditions, such as when MPA is not removed within 2 minutes of being inserted, then copy the error message exactly as it appears on the screen and collect console log and the following information. Contact your technical support representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-UPDATE_TIMEOUT
### Response:
(Severity: 3), (Category: ROUTING), (Description: A client updated the RIB without signaling update completion. This will have delayed the convergence of the routing table, and hence the purging of any stale routes from the forwarding table.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-ISSU_UNEXPECTED_NODE_BOOT
### Response:
(Severity: 4), (Category: INSTALL), (Description: This node boot is not expected in the given phase of ISSU install, install should abort with an error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_AGENT-4-NO_ID
### Response:
(Severity: 4), (Category: INFRA), (Description: Feature Agent encountered an invalid Feature ID when parsing the data files, or received an update for a invalid ID. As a consequence of this error, feature capability information may not be available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_COMPLETED_SUCCESSFULLY
### Response:
(Severity: 6), (Category: INSTALL), (Description: An install operation has completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_AUTH_FAIL_1
### Response:
(Severity: 3), (Category: IP), (Description: Authentication option is received in the PBU packet. But auth-option is not configured for the peer MAG or the customer. Hence the PBU is rejected.), (Recommended Action: Configure auth-option on the LMA for the peer MAG or the customer. Optionally remove the auth-option configuration on the MAG. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SIGILL
### Response:
(Severity: 4), (Category: OS), (Description: Signal info), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-3-ERR_KD_MMAP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to mmap to Kernel dumper information in syspages.), (Recommended Action: This is a critical error which will cause process to restart for error recovery. Collect the syslog or console log. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-MAL_ATTACHFD_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Checking if still some data in the output buffer for socket communication. %d- output buffer status.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-2-SPINE_DEACTIVATED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric encountered fatal fault and is isolating spine card to recover from the fault.), (Recommended Action: Fabric encountered a fatal fault and card has been reset to recover from the fault. If the fault is persistent after card reload, contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_POLICY-3-ORA_RUN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ECM_SETRETRY
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemaon was unable to set retry for ecm. Recovery occurs with automatic process restart.), (Recommended Action: Collect system log information)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_COFO_LB-6-INFO_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the Bundle Manager to indicate an operation like retry or recovery after retry due to previous error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-3-SHMWIN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error while doing shmwin operation), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_PD-3-MATCH_INVALID
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The configured class-map matches are not valid.), (Recommended Action: Modify the policy-map to a valid configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_FT_FAN_AIRFLOW_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when fan trays of different airflow (suction or exhaust) are present on satellite.), (Recommended Action: Please use fan trays with same air flow type on satellite. i.e. either sucntion or exhaust.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-6-UPGRADE_LICENSE_IN_COMPLIANCE
### Response:
(Severity: 6), (Category: LICENSE), (Description: Device has transitioned from upgrade Out Of Compliance to upgrade in Compliance.), (Recommended Action: No action needed. This is just an informative message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_EVENT_CONN_EVM_HANDLER
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for the posix message queue. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-INTF_NOTFOUND
### Response:
(Severity: 3), (Category: L2), (Description: An action has been performed on a FR interface, but Frame Relay doesn't have any information about that interface.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-2-MPA_IDENT_SKIPPED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Hardware in the specified location could not be verified as a genuine Cisco product.), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather the output of CLIs 'show diag <lc> eeprom-info', 'show tech-support ethernet interfaces'. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_TCAM_MGR_LIB-3-PART_TYPE_INCONSISTENT
### Response:
(Severity: 3), (Category: L2), (Description: SSE TCAM Mgr library data on the sTCAM part type is internally inconsistent.), (Recommended Action: An LC reload with slices up is required to correct this. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-MPA_POWER_INTR_SHUTDOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shutdown MPA card due to power down interrupt.), (Recommended Action: Collect show tech-support mpa-mgr and keep this MPA card in observation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-7-DEBUG_REGISTER_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to register for changes to debug tuples.), (Recommended Action: This is not a critical error and hence it can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-FILE_OP_ERR
### Response:
(Severity: 3), (Category: INFRA), (Description: Unexpected internal failure during reboot history file operations, reboot information may not be correct. Reboots will still occur.), (Recommended Action: Collect file and system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-6-DISK_NORMAL
### Response:
(Severity: 6), (Category: INFRA), (Description: When all monitored disks usage are below MINOR Threshold Percentage .), (Recommended Action: Not Required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-ANR_DOWN
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'The autonomic network registration authority ' 'functionality is disabled'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-MUTEX_MONITOR_EVENT_REGISTER
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: IM was unable to perform a system operation that it expects to succeed. IM will exit and restart in an effort to help clear the condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PW_INTR_HDR_PRS_CHDR_VQI_VLD_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PW_INTR_HDR_PRS_CHDR_VQI_VLD_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_TYPE_DISABLED_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Pkt received for timestamp type disabled on Decoder A on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-FLASH_WP_DISABLED
### Response:
(Severity: 4), (Category: DRIVER), (Description: The DIP switch setting of card is at a position that is disabling the CCC bootflash write protection. This is a safety feature to prevent unintended corruption of backup images in the bootflash during FPD upgrade.), (Recommended Action: Enable back the write protection to CCC bootflash.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSCMIB-3-CSC_OCTETSTRING
### Response:
(Severity: 3), (Category: SNMP), (Description: An illegal string was passed in to the MIB by the agent. The current request cannot be completed.), (Recommended Action: This error would be recovered automatically. Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_MASTER-3-GENERAL_FAILURE_NO_RC
### Response:
(Severity: 3), (Category: OS), (Description: Some requested operation failed. The text of the message displays the failed operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_XAUI_PLL_LOCK_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-1 XAUI PLL not locked on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM_COMMON-3-BAD_CLASSIC_CONFIG_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Nvptr corrupted), (Recommended Action: If need to use classic configs, boot an appropriate classic image and rewrite the config. If not No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-FEA
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that IP Tunnel Execution Agent process can't synchronize with FEA.), (Recommended Action: Please try restarting IP Tunnel Execution Agent process with the command <CmdBold>process restart ip_tunnel_ea location <node id><NoCmdBold> If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-4-CLIENT_REG_LIST_FULL
### Response:
(Severity: 4), (Category: HA), (Description: Each client can register only a fixed number of times with LRDlib. Any additional registration requests are dropped.), (Recommended Action: Create a DDTS against client to fix their logic)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-3-IO_COMM_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The software is not able to communicate with the power-module. This may have an impact on the router's available power budget, as the software cannot determine the power-module capacity in this state. This condition should be resolved prior adding additional FRU to the router.), (Recommended Action: This may be a transient condition, as the software will continue to try to establish communications with the power-module. If this condition does not clear on it's own, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_12_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-IDPROM_INIT_FAILURE
### Response:
(Severity: 4), (Category: DRIVER), (Description: card_mgr process failed to read the IDPROM of the device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CAIBIST-3-ERR_HW_BIST_TIMEDOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BIST timedout), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-PTHRD_CREATE
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to create a POSIX thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUBS_AIPC_UTIL-4-TRACE_SHUTDOWN
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is a non-fatal error in closing tracing buffer and can happen when the router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: Check the memory state of the ltrace process and overall system. Reduce the activities on the system if required for tracing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-CLEAR_ALL_FANTRAYS_REMOVED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Software has detected that all fan trays were removed which would have shut down the system. But one fan tray was put back within 45 seconds, thus removing the need to shut down the system.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CARD_RELOAD_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Reload operation on the indicated card has failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBDLLMGR-4-UNEXPECTED_ARRAY_ADDR
### Response:
(Severity: 4), (Category: OS), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-5-RELOAD_EVENT_DELAYED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates that the received reload request is being delayed due to one of nodes performing kernel dumping operation. This reload request will be processed after kernel dumping operation completes.), (Recommended Action: *none*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-CARD_POWER_CFG_DONE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Setting of the reload attribute on the indicated card has completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-FRAMING_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: UART encountered Framing error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HYPHY_FRAMER-3-ODU_CHECKPOINT_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Linecard HyPhy device odu checkpoint api failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-TCAM_ODS2_THRESHOLD_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The TCAM utilization for the Logical Table (LT) ODS2 partition on a specific LC has exceeded the provisioned warning threshold (%)), (Recommended Action: Limit TCAM Logical Table (LT) ODS2 usage accordingly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV4_MRIB-3-INIT_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: MRIB (multicast routing information base) failed to initialize. MRIB is the central routing information base for multicast components. It provides coordination among all multicast routing components and forwarding. The effect is that multicast forwarding will not function. %s - indicates the reason for the failure.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process when this error is encountered to recover. Execute 'show process mrib' to verify that the process is up and running. If it is still non-operational, try doing 'process restart mrib' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSLIB-3-ALLOC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Memory allocation failed for internal operations.), (Recommended Action: System or process is low on available memory. Take actions to disable features or reduce scale.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB_IFSPECIFIC_SERVER-6-ERR_DBG_FAILED
### Response:
(Severity: 6), (Category: SNMP), (Description: The operation requested could not be performed due to an internal error.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-CONFIG_SCRIPT_EXECUTED_NO_CHECKSUM
### Response:
(Severity: 4), (Category: MGBL), (Description: One or more config scripts configured without checksum security enabled were executed. There will be no guarantee that the scripts have not been modified on disk since they were activated. Details of the currently configured scripts and their configured checksum security may be inspected using the command <CmdBold>show script status<noCmdBold>.), (Recommended Action: If the config script has been intentionally configured without checksum security enabled then no further action is required. Otherwise, checksum security may be enabled for the script by entering the following in config mode: script config <name> checksum SHA256 <SHA256-hash> commit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-INVALID_ARGS
### Response:
(Severity: 3), (Category: OS), (Description: The given argument is invalid.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALPHA_DRIVER-2-HW_READ_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The Alpha Driver attempts to read the hardware to find out which of the RSPs are present and active.), (Recommended Action: This log is just to notify that there has been a failure when we attempted to read from the Alpha block. There is no serious consequence if the values remain at default, the software is equipped to handle this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-3-MP_CORE
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in PSE MP Microcode Driver which required exiting (and, hence, restarting) the process. This message records the location of the MP Core File.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-GET_CLIENT_START_TX_ERR
### Response:
(Severity: 3), (Category: OS), (Description: While the TX operation, could not get the client start data to proceed ahead.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-SIGEVENT_SEND_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_UCORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE uncorrectable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: CEPKI general error message with error string and code.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-PHY_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An attempt to initialize PHY failed. The error message describes the error, provides an error code and a string interpretation of the error code.), (Recommended Action: Please try to recover by reloading line card using CLI 'hw-mod loc <> reload'. If the issue persists, collect console log and the following information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces - show tech-support location <> file <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP session backoff parameters?
### Response:
To configure LDP session backoff parameters, use the 'backoff' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#backoff 15 120
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DM-7-INFO
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: An error occurred during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-4-DEBUG_INIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB (D)RP component.), (Recommended Action: Platform software will correct itself if this happens.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-FCRAM_BIST_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Egress Queue Manager encountered a FCRAM BIST failure error. Possible cause for this error condition is a faulty hardware.), (Recommended Action: No action is required. Process will be automatically restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ERR_SYSDBBIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-SHMEM_TRNC_FAIL
### Response:
(Severity: 3), (Category: L3), (Description: The IPv6 Neighbor Discovery (ND) spoofing process (ipv6nd_lite) has failed to resize a shared memory region required for communication with the main ND process (ipv6_nd). This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart. The error may result from a shortage of resources such as memory.), (Recommended Action: It may be possible to recover by restarting the ipv6nd_lite process. Use the <CmdBold>show memory summary [location <node-id>]<noCmdBold> command to determine the state of system memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Arbiter driver encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-TX_BUFF_ETH_SERVER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get buffer for TX for eth_server. %d- Length of the buffer.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-XBAR_TIMEOUT_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an crossbar timeout error on link 0), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_MQ_OFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 0 MQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-4-PROC_EXIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-TRANSACTION_START
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T3E3-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of T3E3.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_MA_PWHE-3-REPLICATION_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: An interface replication failed with the error code displayed in the message. The error might have been caused by a misconfiguration or a lack of resources. The replication might have failed for more than one interface; only one interface name and one error code are included in each instance of this message. The replication will be retried so, if the error was due to a temporary resource failure, the system may automatically recover.), (Recommended Action: Verify the replication status of the PseudoWire Head-End interfaces using the CLI 'show l2vpn xconnect detail'. Note that due to the retries, the replication may have subsequently be successful If the status is still unsuccessful, refer to the L2VPN section of the Cisco IOS XR Documentation to verify the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-2-SPA_CTX_ERR
### Response:
(Severity: 2), (Category: L2), (Description: The spa_ether_ctx context data cannot be set.), (Recommended Action: collect the trace log via 'show plim ether trace error location <>' 'show plim ether trace info location <>' 'show tech-support ethernet ' 'show plim jacket trace all location <>' and collect console logs and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_lite-3-ERR_SHMEM_OPEN_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to open the shared memory fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFD_HELPER-3-INTERNAL
### Response:
(Severity: 3), (Category: MGBL), (Description: An unexpected internal error occurred in the confd_helper.), (Recommended Action: Copy the error message and trace exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-ACCOUNTING_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is typically an internal error in the software. The software failed in the interface accounting on the engine..), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea. If the problem persists, copy the error message as it appears on the console and any noticeable side effects. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does configuration navigation work in IOS XR?
### Response:
IOS XR supports hierarchical configuration navigation similar to IOS. You can move between configuration modes using commands like 'interface', 'router', 'line', etc. The 'exit' command moves up one level, while 'root' returns to the top level global configuration mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-3-DS_HANDLE_CREATE
### Response:
(Severity: 3), (Category: MGMT), (Description: This comes when directory service infra initialization fails due to some infra issue, the program will re-connect the same), (Recommended Action: The program tries to re-create directory service handle, once directory service is up, this message will not come up, If directory service is up and still this message comes, the work-around would be restart program)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_M_FREE_EMPTY_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast free pages empty on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-BRM_AGGR_DELTA_THRSHLD
### Response:
(Severity: 4), (Category: FABRIC), (Description: There might be a fabric disconnect in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_PROTECTED_FABRIC-4-MGID_MAX_HB_FLOWS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The max flow count configured in the cli - hw-module optimized-fabric-miulticast... - has been reached. There are no more high bandwidth MGIDs available for high bandwidth flows that match the ACL provided in the - hw-module ... - CLI. High bandwidth flows will now be allocated MGIDs from the general pool), (Recommended Action: User should consider increasing the max limit for high bandwidth flows or reduce the number of multicast routes that match the ACL in the CLI)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-LWM_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The LWM subsystem indicated an error when trying to send a message between threads in the CFM Daemon, which could not be handled. The operation will not be retried - the internal state of CFM may not match the global system state.), (Recommended Action: If any problems are observed, then try restarting the CFM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-SOFTWARE_CHANGE_RELOAD
### Response:
(Severity: 6), (Category: INSTALL), (Description: The requested operation requires that nodes be reloaded for the software change to take affect. The install infrastructure will automatically reload nodes with files that are removed, added or modified by the software change.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-SERVICE_CREATE
### Response:
(Severity: 3), (Category: HA), (Description: The system failed to create the thread that provides the indicated service. This is a fatal error for wdsysmon.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG_CLIENT-4-ASSERT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The SRG client process hits some abnormal condition. These warnings will not affect functionality of SRG.), (Recommended Action: Collect the traceback associated with this Log and contact the engineer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-6-TEST_FIRE_CMD_PULSE
### Response:
(Severity: 6), (Category: OS), (Description: Status information while client registration in test command routine.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-7-EXTERNAL_USB_DEVICE_INSERTED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: platform umass media device insertion is called when it detects the a device inserted in the external USB port. Inform mediasvr about External USB inserted.), (Recommended Action: Debug message only. No action is required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_DELETE_BYKEY
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_delete_bykey failed while deleting the object present in the chkpt table.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-NOTIFD_CLIENT_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Notification Daemon client library failed to initialize correctly), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-CLEANUP_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: A CPP driver failed to cleanup data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_TX_FIFO_OFLOW_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported tx fifo overflow on bridge instance - 0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-CPU_INTERRUPT
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has detected that CPU IOFPGA board has reported an interrupt. This interrupt may be fatal and can cause system to reset. If system goes power down then user needs to power cycle the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVDPMEM-3-OPEN_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-7-INTERNAL_NATIVITY_FILE
### Response:
(Severity: 7), (Category: MGBL), (Description: This message indicates that the nativity file read has failed.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-4-QUEUE_RED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a warning indication that a queue length is growing in a dpa client), (Recommended Action: Please collect the console log, DPA traces (show dpa trace loc <>), Also notice if the error message is transient or persistent.Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-DB_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The IPV6 MA process failed to initialize its interface database), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BANNER-7-SYSDB_UNREGISTRATION_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-DISK_FSCK_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-4-CHKPT_RESTORE_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Encountered a checkpoint recovery failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INFRA_TEST-4-UNSOLICITED_2
### Response:
(Severity: 4), (Category: TEST), (Description: An unsolicited message with an integer arg, a string arg and an interface.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-6-PARTIAL_DOWNLOAD_OCCURRED
### Response:
(Severity: 6), (Category: INSTALL), (Description: During a reload operation, some nodes download as much information as possible before the reload occurs, and then complete the download after the reload. Under extreme circumstances, this can result in the node having to reload twice.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA_DEBUG-6-INIT_ERR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An unexpected initializatione error has occurred while trying to initialize the debugging module in the platform ICPE EA component.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-3-DISK_ALARM_MINOR
### Response:
(Severity: 3), (Category: INFRA), (Description: When some monitored disk's usage is above MINOR Threshold Percentage.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_STORM-4-SC_DELETE_WARN_INTF_NAME
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Resets storm control config on this main interface across all BDs), (Recommended Action: Provision fresh storm control configs to police the traffic again)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-EAOPT_SEND_INVALID_KEY
### Response:
(Severity: 3), (Category: IP), (Description: Either there is no active send-key for the specified keychain or the active send-key has some problem. Hence can't send data to the peer.), (Recommended Action: Check the keychain to see if it has any active keys. Sometimes, this error might come if there is no overlap between the send-keys. In that case, if keychain shows that there is an active key, then this error can be ignored. Else, change the configuration to have an active send-key. If there is an active key and you still see the error, that indicates that there is some configuration problem with the active send-key. Correct that and if that doesn't work, contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CONNECTION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Connection to a shared database sotware component failed. This could be an intermittent issue. This can be ignored unless this message is seen frequently.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFI_EA-3-RETRY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The SFI EA has failed to program a pwhe interface after 1 or more retries.), (Recommended Action: Shut/no-shut the pwhe interface, or if needed, remove and re-create the pwhe interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-INET_NTOP_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-FILE_RENAME_FAIL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the loadpath infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be moved, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-3-SET_CALLBACK_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is a software error when trying to set call-back to IM.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-UNSUPPORTED_CONFIG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unsupported configuration is applied to the interface. Configuration needs to be removed.), (Recommended Action: Remove the indicated unsupported configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_SIS-3-ERROR_NO_TB
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Service Interface Server encountered a fatal error and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-DB_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A server database inconsistency has been detected.), (Recommended Action: If this message occurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show tech-support shmwin - show shmwin trace server location 0/x/CPUx - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-SUBINTF_ID_MISMATCH
### Response:
(Severity: 3), (Category: L2), (Description: The subinterface ID is the numerical identifier for a subinterface configured on a main interface. This should not change over the lifetime of the subinterface, but configuration parsing has returned a different subinterface ID for a subinterface that the CFM Daemon has a subinterface ID already stored for. This may indicate an inconsistency in the CFM Daemon database.), (Recommended Action: Removing the configuration responsible for the failed operation, issuing 'process restart cfmd' on the affected node, and re-applying the configuration may help to resynchronize system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-7-LTRACE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-MAINIT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that initialization of IP Tunnel's Management Agent failed. Particular reason is included in the message. This error prevents IP Tunnel from functioning.), (Recommended Action: Please try restarting ip_tunnel_ma process with the command <CmdBold>process restart ip_tunnel_ma<NoCmdBold> If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-4-INVALID_PARM
### Response:
(Severity: 4), (Category: MEDIA), (Description: An invalid parameter value was passed to the named function.), (Recommended Action: Report this warning to the TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_MEM_ECC_FAIL_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory ECC failure on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. Please verify the bridge FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-3-ERR_SYSDB_REG_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurrred when accessing the system database), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-MSG_SEND_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that threads of shelfmgr were not able to communicate via async pulses. Restarting shelfmgr to recover.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-DATASIZE
### Response:
(Severity: 3), (Category: SNMP), (Description: The maximum size of the data has been exceeded. This could be due to user configuration or internal error.), (Recommended Action: re-apply user configuration and check it againif still having problem need to contact technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: BPE Event Manager create error), (Recommended Action: Please attempt to correct the error by restarting the process by issuing the command in exec mode -process restart bpe If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-UPGRADE_DSP_HIGH_POWER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot do FPD upgrade of Coherent DSP when it is in High power mode.), (Recommended Action: Shut the Optics Controller(s) corresponding to this DSP and try upgrade again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_MEMMON-5-SYSCALL
### Response:
(Severity: 5), (Category: INFRA), (Description: A system call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-3-IGP_DLB_RELOAD_REQ
### Response:
(Severity: 3), (Category: FABRIC), (Description: If the hw-module command is used to configure IGP DLB and router is not reloaded, there will not be any effect.), (Recommended Action: In order to enable DLB at IGP level, the router must be manually reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-ENGINE_HW_INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the LC hardware in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-XBAR_TIMEOUT_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an crossbar timeout error on link 3), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FTPCLIENTMIB-3-NOMEM
### Response:
(Severity: 3), (Category: SNMP), (Description: No memory in the process.), (Recommended Action: 'Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_UTIL-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: MEDIA), (Description: Debug init failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-IFH_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failure occured while binding/unbindig interface handler. This error may occur in following cases - binding interface handle - unbinding interface handle - trying to get interface info from the server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-XFP_ACCESS_PERSIST
### Response:
(Severity: 3), (Category: L2), (Description: Software could not access the optics module during initialization.), (Recommended Action: Replace the XFP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-COLD_RESTART_IGNORED
### Response:
(Severity: 7), (Category: HA), (Description: The process has failed to restart multiple times. By design, the process will continue to restart with its existing checkpoint data.), (Recommended Action: Analyze the restart failure and take appropriate recovery action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-6-RX_ALL_CH_LOS_ERR
### Response:
(Severity: 6), (Category: FABRIC), (Description: The Rx POD detects a LOS signal on all channels. Please check sh controllers fabric pod health <> <> <> to confirm the same.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-COMBINATION_OF_PLIM_NOT_SUPPORTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Due to thermal restriction, the combination of 6-10GE-WLO-FLEX PLIM in the lower slot (s = 8...15) and CRS-CGSE-PLIM in the upper slot (s = 0...7) is not supported.), (Recommended Action: Avoid the combination of 6-10GE-WLO-FLEX PLIM in the lower slot and CRS-CGSE-PLIM in the upper slot. Move either of the PLIMs to different slot where this restriction holds good.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-CPU_THERMTRIP
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has detected that the CPU complex in the indicated card is reporting thermal trip error condition that will require the card to get power-off to prevent other HW components from getting damaged in this over temp condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_20
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_LTRACE
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the Lightweight Tracing service. The error message describes what operation has failed and why it failed. This is a fatal error and the PPP MA process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-6-OVA_COPY_START
### Response:
(Severity: 6), (Category: OS), (Description: OVA copy start), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DATAPATH_FPGA_API-7-ERROR
### Response:
(Severity: 7), (Category: L2), (Description: TDatapath FPGA API generated errors.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-7-DEB
### Response:
(Severity: 7), (Category: OS), (Description: A DEBUG level message was emitted by QNET.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SYNC-4-DOMAIN_NAME_TRUNCATED
### Response:
(Severity: 4), (Category: OS), (Description: Linux limits domain names to a maximum of 64 characters. XR names can be longer but will be truncated in the Linux environment.), (Recommended Action: 'Configure a domain name no longer than 64 characters in length.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERRRATE_EXCEED_GLACIAL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabric driver encountered the annunciated error. For Error Node Keys - 0x1050016; 0x1050018; 0x105001A : This indicates a hardware problem in Fabric ASIC. If the displayed error is one of the following 'Correctable Single-Bit Error in Cell Reference FIFO' 'Correctable Single-Bit Error in Reference Count Table' 'Correctable Single-Bit Error in Cell Store SRAM' The data will be corrected. The number of correctable single-bit errors occur on reading these memory is aggregated, When the aggregate count exceeds threshold (2 in 2 days), This ios msg is reported. The shelf-mgr reloads the fabric card.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-4-VIRTUAL_IP_ADD_TO_LINUX
### Response:
(Severity: 4), (Category: INFRA), (Description: kim enables reachability to gRPC and third-party applications using a virtual IP by adding that IP address to the Linux loopback device. If this fails, then Linux will be unable to accept the traffic, leading to the virtual IP being unreachable for gRPC and third-party applications.), (Recommended Action: Restart the kim process via 'process restart kim'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-STATIC_DB_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: CGN_MA failed to register for static DB update handler, the process will restart under this scenario.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-SUFFICIENT_ZONE_POWER
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that Power budget for the zone is now sufficient for zone power.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCCLIB-3-ERR_HW_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hardware initialization failure, the error message has detailed information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable RSVP on a Cisco IOS XR interface?
### Response:
To enable RSVP on an interface in Cisco IOS XR, use the 'mpls traffic-eng interface' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng interface GigabitEthernet0/0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-XML_DATA_PROBLEM
### Response:
(Severity: 3), (Category: INFRA), (Description: A error was detected in the configuration file for the switch.), (Recommended Action: Run the command 'show tech-support control-ethernet', and send the result and file specified in error message to customer support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-VOLT_ALARM_SHUTDOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A hardware problem is detected for the voltage sensor specified in the system message. The voltage sensor read a value outside the expected range. The slot experiencing the issue will be shutdown to prevent damage to other components.), (Recommended Action: This condition indicates a potential hardware problem with the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-HW_FAULT_RECOVERY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hardware failure recovery reload), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_INFRA_LIB-3-failed_to_init_ltrace
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to initialize ltrace.), (Recommended Action: Please contact tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INSERT_VIRT_INST_ENTRY
### Response:
(Severity: 3), (Category: OS), (Description: Inserting the named virtual service into the virtual service DB tracked by Virt-manager failed.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEV_EUSB0_NOT_AVAILABLE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EUSB0 device not available), (Recommended Action: Please attempt the following: If dual RSP, and the problem is on the active RSP, issue 'redundancy switchover' If the problem is on the standby/simplex RSP: Restart low level usb driver via ksh, 'kill io-usb_pid' Failing which, Restart usbstack 'process restart umass-enum' Failing which, Reload RSP If problem persistes, replace EUSB devices If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_MEMPOOL_NOMEM
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to allocate memory from the specified pool.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_COMPLETED_WITH_FAILURE
### Response:
(Severity: 6), (Category: INSTALL), (Description: An install operation completed with error. Use 'show install log <install ID> detail' for more details.), (Recommended Action: Please use 'show install log <install ID> detail' to obtain more information about the failure and take corrective actions if necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMIAP-4-IM_ATTR_FIND_IF_FAILED
### Response:
(Severity: 4), (Category: IP), (Description: Management interface information needs to be known in SMIAP so that it can make the virtual IP address functional.), (Recommended Action: If the message is for a management interface which doesn't exist anymore, e.g., due to a failover, this error can be simply ignored. If it is for an interface which is active, contact technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-ILI_IF_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Punt interlaken interface has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_STATE
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CISCOBGPPAMIB-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: Memory unavailable), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIRTIO-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The VirtIO SPP plug-in failed to initialize.), (Recommended Action: If any problems are seen, they may be rectified by restarting the spp process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-4-ACCT_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Failed to send an accounting record to RADIUS or TACACS+ server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-INTERNAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An internal error has been encountered and the Pseudowire cannot be established.), (Recommended Action: Please provide the exact error message seen on the console, collect a core dump of the running l2vpn_mgr process, and the show tech-support l2vpn output for further analysis of the error condition and potential recovery)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXMGR-2-BIST_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There was a failure in Built-in self test of PCIE device), (Recommended Action: Please reload the board using the following command: 'reload location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8508-3-INTR_MASKED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCIE interrupts masked due to large errors), (Recommended Action: This error is a momentary error and software should be able to correct it. If the issue persists please, contact your technical support representative with the gathered information. No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_RUN_PHASE_STARTED
### Response:
(Severity: 6), (Category: INSTALL), (Description: The run phase of an ISSU operation has started - another message will be output when the phase finishes.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_MPLS_EA-3-ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ANYCAST_N_FLAG_SET
### Response:
(Severity: 6), (Category: ROUTING), (Description: An anycast route is being advertised with the segment-routing N-flag set.), (Recommended Action: Correct the configration and make sure no router sets the N-flag for the prefix.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSMLIB-3-EXIT_ON_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in the PSE ASIC client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the PSE driver. The root cause may be located in either hardware or software.), (Recommended Action: *RECUR* Copy the error message exactly as it appears on the console)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'install rollback' feature in IOS XR?
### Response:
The `install rollback` feature allows you to undo the effects of an install operation and revert to the previously committed software set. It is useful in case an install operation causes undesired behavior or issues. The rollback can be done to the last committed state or to a specific installation point.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_15_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-CTRL_ALREADY_ASSOCIATED
### Response:
(Severity: 3), (Category: L2), (Description: Controller is already associated with logical switch, first remove this association.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM_COMMON-3-BAD_CLASSIC_CONFIG
### Response:
(Severity: 3), (Category: MEDIA), (Description: Classic configuration different version than expected), (Recommended Action: If need to use classic configs, boot an appropriate classic image and rewrite the config. If not No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_LNK_FAULT_ERROR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the XFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do XFP OIR. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error has occurred on the bridge. The message has the error register, bit location and the error description.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_RRW_LOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to aquire rrw lock to the request record area in shared memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-SYSDB_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Sysdb api call failed.), (Recommended Action: Few show commands may not work which is not a critical error. Restarting the process should fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-3-SPABUS1_PARITY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a Parity Error on SPA Bus for SPA0 (SPA Bridge0) or SPA1 (SPA Bridge1).), (Recommended Action: Remove the SPA. Examine the SIP bay and the SPA connector pins for damages. If no damage found reinsert the SPA. If the problem persists, call tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-4-IDPROM_INIT_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: mpa_mgr process failed to read the IDPROM of the device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-CFG_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The Verification Daemon failed to cleanup its configuration registrations, this may leave stale state within SysDB. The process is exiting anyway, but subsequent process restarts may hit errors within SysDB during initialization.), (Recommended Action: This error message may be safely ignored unless subsequent process restarts fail. If subsequent restarts fail, gather the output of 'show tech-support sysdb' and contact your local support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify MPLS L3VPN VRF interface status?
### Response:
To verify MPLS L3VPN VRF interface status, use the 'show vrf MyVRF interfaces' command. show vrf MyVRF interfaces
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you run diagnostic tests in Cisco IOS XR?
### Response:
To run diagnostic tests in Cisco IOS XR, use the 'diagnostic' command followed by the test type (such as ondemand or scheduled) and the test name or ID. You can also configure the test parameters such as the interval, iterations, and pass/fail criteria using the 'diagnostic' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_RX_ALIGN_LOSS_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Rx alignment loss on XAUI to NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWCHUNKALLOC
### Response:
(Severity: 3), (Category: OS), (Description: There wasn't enough resources to allocate a chunk in timer wheels.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-XGXS_DTE_SYNC_ERROR_RECOVERY_FAILED
### Response:
(Severity: 2), (Category: L2), (Description: The PLA MAC xgxs DTE layer went down due to loss of sync or lane alignment. The link could not be recovered so the port was disabled. The traffic may start getting dropped after this error message.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-MSG_Q_MUTEX_OP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'process may be restarted to recover after the running core of the process is collected')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-INTF_DOWN
### Response:
(Severity: 6), (Category: IP), (Description: 'The source interface is down, therefore it can not be used.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSDB_REG_VERIFY_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Sysdb verifier registration failure.This will impact the behavior of the dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show-tech sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-UNKNOWN_CODE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-REG_ACCESS_FAIL_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Register access failure on bridge instance-2.), (Recommended Action: Please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_0_PKT_MAXLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on FIA to NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-3-FAILED_STATE_FILE_UPDATE
### Response:
(Severity: 3), (Category: INSTALL), (Description: While trying to synchronize the install state files to the local node, an error occurred. An attempt to re-sync all the state files will be automatically re-tried.), (Recommended Action: State file update will be re-attempted automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-INVALID_PULSE
### Response:
(Severity: 3), (Category: MGBL), (Description: This is due to either of the following reasons. First, TTY Server receives an invalid pulse code. Or the send process is not tty server. This message added to capture maximum debug information to dig this issue further.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-FORCE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-LWM_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An LWM related operation failed.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-HIGH_VOLTAGE_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an CFP voltage greater than or equal to the high voltage alarm threshold. The CFP is the pluggable optics on the line cards. The voltage threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_PANIC
### Response:
(Severity: 3), (Category: IP), (Description: Panic error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-EVENT_ATTACH
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_*_attach() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_QFPCPUCTRL-1-DEV_VERSION_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The CPU controller driver software is not compatable with the CPU controller hardware version.), (Recommended Action: Upgrade to an appropriate CPU controller FPGA image, and reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a warning log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-ERR_LEAFTIMER
### Response:
(Severity: 6), (Category: SECURITY), (Description: None at this time), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering path option feature?
### Response:
The MPLS traffic engineering path option feature allows the path for an MPLS TE tunnel to be specified. The path can be dynamically calculated or explicitly specified. Dynamic paths can be based on a cost metric or TE metric. It is configured with the tunnel mpls traffic-eng path-option command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ATM_V2-3-DRIVER_ERR
### Response:
(Severity: 3), (Category: L2), (Description: ATM SPA OC3/OC12 driver error messages), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-HB_RECEIVED_AGAIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Shelfmgr has previously missed HBs, but is now receiving them again.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDSUTILS-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Failed to initialize the ltrace.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERR_NODEID_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates a failure in creating the node ID of the specified slot. Inventory information for the specified slot would be incomplete. This would affect information provided to CLI 'show inventory', inventory schema, and the entity related MIBs for the specified slot. %s - indicates the internal error reason.), (Recommended Action: Try restarting the invmgr process via CLI 'process restart invmgr' to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-OOR_GLOBAL_BSR_GRANGE_LIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: OOR Error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUB_SIP_SHARED_DB-4-TRACE_SHUTDOWN
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is a non-fatal error in closing tracing buffer and can happen when the router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: Check the memory state of the ltrace process and overall system. Reduce the activities on the system if required for tracing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-6-DCD_DISCOVERED
### Response:
(Severity: 6), (Category: MGBL), (Description: The RS232 driver discovered Data Carrier Detect signal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-HA_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: Used for logging of HA events like process startup, entry and exit of NSF/GR or NSR procedures and related events.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_ASYNC_ATTACH
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when attaching a handler for an Event Manager asynchronous event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-5-OPERATION_QS_ABORT_DONE_WITH_CLEANUP
### Response:
(Severity: 5), (Category: INSTALL), (Description: The Quickstart has successfully executed its abort procedure and will now begin to restore the system to a consistent state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_PUBLISHER-3-HANDLER
### Response:
(Severity: 3), (Category: INSTALL), (Description: There was a problem with a request to get the selected version for a communication protocol, or with a response to a notification of a change to a selected version.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-ECMP_PATH_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Adding ECMP path failed due to ECMP Paths OOR .), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-NO_RMF_REFERENCE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Skipping an API reddrv_reset_standby when rmf reference is removed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_TS_CORE_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-1 timestamp core error on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-SOCKET_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process do socket related initialization.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-7-DEBUG_THREAD_CREATE
### Response:
(Severity: 7), (Category: ROUTING), (Description: CLNS failed to create the thread for debug registration and to handle debug events. Thus, causing unavailability of debugs. But CLNS should continue with the normal functionality, so the process should not exit even if this thread is not created.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_1_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power greater than or equal to the high Tx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-EVENT_ATTACH
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_*_attach() failed. Config CLI library failed to attach events to event manager. The effect is that config-cli would not handle any events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-GET_FINT_NAME_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Failed to add ipv4 to fint which represents the fabric interface. This is retried by reconnecting to IM. If this error is seen only once, it may not have significant impact. If this error is persistent, it may mean that it is not possible to send/receive packets vai the fabric.), (Recommended Action: Collect the output of show tech-support, show ipv4 ma trace, debug ipv4 ma error from the location the error message comes from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-SHUTDOWN_REQUEST
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The reason should be supplied in the IOS msg itself, but basically this msg means that shelfmgr is shutting down a node because a process specifically requested it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OC768_FRAMER_ASIC-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is a informational message from OC768 Framer ASIC driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-5-SFP_OIR
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The control-ethernet external gigabit ethernet sfp state changed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified Multilink Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EES-5-EBUSY
### Response:
(Severity: 5), (Category: PLATFORM), (Description: EES Warning message.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-PEX_VS0_FATAL_ERR_BIT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a pex switch error), (Recommended Action: Please try to correct problem by reloading board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-CHECKPOINT_TABLE_CORRUPT
### Response:
(Severity: 4), (Category: INFRA), (Description: On trying to read breached thresholds from the checkpoint table, the table was discovered to be corrupt.), (Recommended Action: No further interactions with the table are possible, so the table has been deleted. No further action is required, but breached thresholds may have been dropped across a reload/ISSU operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-AREACREATE
### Response:
(Severity: 6), (Category: ROUTING), (Description: An error was encountered when trying to create an area.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 <process-name> trace all - show running-config router ospfv3 - show config failed)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-BAG_DECODE_ERR
### Response:
(Severity: 4), (Category: SYSDB), (Description: Bag decoding error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BAG_SCHEMA-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: INFRA), (Description: The process failed to allocate memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_NO_OPERATION
### Response:
(Severity: 7), (Category: OS), (Description: function called to do neither Overwrite nor Update.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-DDR_LOSS_OF_SYNC_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on DDR interface on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_ISOLATION-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message is for information related to node isolation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-7-SB_MBOOT_FAILURE
### Response:
(Severity: 7), (Category: DRIVER), (Description: Additional debug info for Secure Boot validation failure reported by CC FPGA or CPU Complex FPGA.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SEIPC-3-RECV_BUF_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The size of receive buffer is less than the required size. This will cause degraded perforamce in SEIPC calls. Here is a list of possible reasons for this message (not all-inclusive). - Failed to receive buffer. This condition indicates a problem with receive buffer size.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_SYSDB_UNPACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabricq Event Manager notify error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-3-STBY_SYMLINK
### Response:
(Severity: 3), (Category: MEDIA), (Description: Syncfs failed to create required links to the standby card. Syncfs unable to mirror any files to the standby card.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-6-PROCESS_THROTTLED
### Response:
(Severity: 6), (Category: ROUTING), (Description: RCMD is ignoring a trigger for collecting convergence information since collection is already in process or has been recently collected.), (Recommended Action: This is for information only. It indicates that the rate at which RCMD monitored events are being detected on this router are higher than the configured parameters. This would cause RCMD collection to happen faster than the configured interval value so as not to lose information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-TCAM_EXCESSIVE_PARITY_ERRORS
### Response:
(Severity: 0), (Category: PLATFORM), (Description: TCAM correctable parity errors have occurred more often than expected.), (Recommended Action: Note the number of events & burst of this TCAM event using the following cli 'show controllers np interrupts 13 all location <>'. Monitor this value over the next week to determine how often TCAM events are occuring. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCM_EA-2-INTERNAL_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Internal error with error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAGT_SERVER-4-SYNCE_CFG_UNSUPPORTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: One of the SyncE interfaces have reported an alarm as specified in the alarm description. This might be because of the hardware or interface limitation. The alarms can occur transiently during synce-events like configuration changes, network events or cabling changes.), (Recommended Action: Please remove the un-supported synce configuration from interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB_MAIN-3-EVT_MGR_CREATE_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to create an event manager for process fsdb_fadb), (Recommended Action: Search the event logs for events/errors related to the failure reason. Event management is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) and the output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-6-UNMOUNT
### Response:
(Severity: 6), (Category: MEDIA), (Description: nvram: file system is unmounted due to process restart or node reload), (Recommended Action: Nothing needs to be done)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-0-XFI_IF_FAIL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Punt XFI interface has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-4-INVMGR_SLICE_INFO_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: The NPU driver received slice data diff than existing value), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IP_EA-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IP_EA-3-ERR_MEM_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 show memory summary </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> show memory location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_PKT_MAXLEN_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-7-HBLOSS_COLLECTION_IGNORED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The current request to collect heatbeat loss log is being ignored because of another instance of heatbeat loss log collection that is still in progress.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APM-3-SW_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal system software error occurred. The error message describes the error.), (Recommended Action: Collect console log and the following information and contact your technical support representative with the gathered information. - show platform - show logging - show tech-support apm)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error (other than EINTR) occured in the event loop. The process has exited and restarted.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-SESSION_LIMIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Attempted to create SSH Sessions more than configurd maximum), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-TEST_SKIPPED_FROM_ACTIVE
### Response:
(Severity: 6), (Category: DIAG), (Description: The specified test cannot be run from active node.), (Recommended Action: Nothing. The test cannot be run but the system is working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_CONST_BP_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-0 is constantly backpressuring bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-RUNNINGIN_BACKGROUND
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP is running in backgroud Please Provison the Device maually by creating a user name or execute ztp terminate command from cli to stop ZTP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-ERR_THREAD_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Creation of LWM thread failed. Software will automatically do recovery by restarting the drp_pairing process.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-UNKNOWN_BOARDTYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Either an invalid boardtype is being queried, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out. %s - indicates the location of the error. 0x%llx - gives the boardtype.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_0_NPU_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-0 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-QDD_POWERCYCLE
### Response:
(Severity: 6), (Category: L2), (Description: Do Transceiver disable/enable(Module powercycle) for proper functioning of the module with new firmware), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-3-SPA_FATAL_ISR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SPA Bridge ASIC has detected a SPA fatal interrupt.), (Recommended Action: If the problem persists, reboot the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-INVALID_CAPABILITY
### Response:
(Severity: 4), (Category: MGBL), (Description: While trying to read the platform capabilities from the Yang schema during initialization, the Central Config Validator (CCV) encountered an invalid capability. CCV will be disabled. Attempts to modify system configuration while CCV is disabled will not be validated.), (Recommended Action: The invalid capability should be investigated, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-LTRACE_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath was unable to initialize the ltrace subsystem. Ltrace is used for tracing the internal events of a software component. This error could occur for two reasons. 1. The system is low on resources. 2. Error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_PAK_CLIENT_GET_BUFFER
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS encountered an error while attempting to acquire a packet buffer to use to send a packet. The relevant packet has been dropped. The problem may be due to resource starvation. IS-IS will recover when sufficient resources become available.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SRVR_ENGINE-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: SKS server general warning message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_SVR-4-HFA_CLK_DELTA_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: The process acct_svr has failed to get the HFA clock delta for the given consecutive times. The flow report uses the forwarding asic clock which may be slightly off from the system clock. To correct the timestamp, the HFA clock delta is retrieve and on failure, the previously recorded delta is used. This log is printed out after so many consecutive failures to retrieve the clock delta, which may lead to skewed timestamps in the flow report.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-UC_LO_SBE_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Unicast low priority fifo single bit ECC error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_CRASH_NAME
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-DATA_SEND_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Sending the data to a remote node over the control ethernet has failed.), (Recommended Action: If message appears only once, then no action is required. Packets will be retransmitted and system should recover automatically. If message appears continuously, then it could indicate a problem with the control-ethernet. Please restart eth_server process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-FILE_OPEN_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: File open failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-INIT
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the RSPP MA, the process responsible for managing the diversion of packets to services such as firewalls. The initialization will be aborted and retried.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_TIMER_CREATE_LEAF
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Cannot create manageed timer leaf), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_NETIO-3-INSERT_DICT
### Response:
(Severity: 3), (Category: L2), (Description: The env variable setting may not be set up for load path variable), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSP0_PAR_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Local Bus RSP0 parity error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-MEM_ALLOC_ERR
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process exitted due to memory allocation failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_EA-3-SYSMGR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The process was initialized successfully but was unable to inform System Manager of the success.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_QAD_GET_DEPTH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get the qad queue depth(number of packets in queue). This should be because of some issues with the indicated qad queue %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_PM-3-ERROR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Manager encountered an initialization error. A reason text is supplied to describe the error. Platform Manager exits on initialization error. System Manager will restart platform manager to recover the situation. If the situation is not recoverable (i.e. platform manager restarts multiple times), the line card will be reloaded by system manager.), (Recommended Action: Please collect output for- 'show log location <R/S/I>' 'show controller pm trace error location <R/S/I>' 'show controllers pm location <R/S/I>', prior to the line card reload and provide it to Cisco TAC support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-LEARNING_TIMER_TIMEOUT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered when one or more TE ports failed to learn before Learning timer timeout.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-REPNODE_REPLICATION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Repnode reuse failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-SYSDB_UNBIND_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-SCHED_STOPPED
### Response:
(Severity: 6), (Category: DIAG), (Description: The scheduled Diagnostic test has been stopped.), (Recommended Action: If you do not want the test to run, do nothing. If you want the test to run, schedule the test or run the test manually.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-XFP_XCVR_TYPE
### Response:
(Severity: 2), (Category: L2), (Description: This message indicates that the unsupported XFP type is inserted.), (Recommended Action: - Check the XFP, make sure it is CISCO certified - Insert the supported XFP types)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-EVQ_DESTROY_FAIL
### Response:
(Severity: 6), (Category: ROUTING), (Description: An unexpected error occured whilst destroying an event queue. This is an internal programming error, but will not affect protocol operation as it occurred whilst IS-IS was destroying resources which are no longer required.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-FATAL_ERROR_INIT
### Response:
(Severity: 3), (Category: INFRA), (Description: A fatal error occurred in MLAP initialization. Note the reason for the error.), (Recommended Action: Root cause of the error needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM_EA-3-AIB_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The FR VCM EA process initialization failed whilst trying to connect to AIB. It should in fact, retry the connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-WDSYSMON_EVENT_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_EVM_ASYNC_ATTACH
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver was unable to attach the indicated asynchronous handler to the event manager. In case this is reported for timer, driver may exit and the System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIO-7-ERR_REGISTER_SET
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The EIO library encountered the annunciated register access error. This could result in inconsistent behavior of the device/system.), (Recommended Action: Run diags on the board. If it is possible to isolate the trigger point for this failure, collect all the necessary info (condition) that caused the error. Reload the MSC to avoid inconsistent behavior of the system because of this failure. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_REX-6-CORE
### Response:
(Severity: 6), (Category: SERVICES), (Description: An unexpected situation was reached; the diversion manager has voluntarily produced a core dump for debugging purposes. This does not affect the operation of the diversion manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-EVENT_QUEUE_ENQUEUE
### Response:
(Severity: 3), (Category: INFRA), (Description: An error was encountered enqueueing a message on the Rx queue, which conveys incoming messages from the Netlink module's separate thread to the other modules in the process. This could indicate system resource issues.), (Recommended Action: If the system is experiencing memory exhaustion, resolve other issues that may be causing this failure state. If the issue persists, restart the process, and if the issue continues after process restart, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALID_IPV4_6_FLAG
### Response:
(Severity: 3), (Category: MGBL), (Description: 'generic ipv4/6 nvgen flags are incorrect. Probably error in ' 'dumping the flags.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-SATELLITE_PORT_VERSION_UNSUPPORTED
### Response:
(Severity: 3), (Category: L2), (Description: The given Satellite is not compatible with the configured 'network' version of CFM on Satellite fabric links. This could leave the given link to this Satellite unprotected.), (Recommended Action: Ensure that the CFM Satellite fabric link configuration type matches the capabilities of the Satellite device and expected fabric protection.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_UIDB-7-LIB_ERR
### Response:
(Severity: 7), (Category: L2), (Description: Programming an invalid feature on uidb has failed.), (Recommended Action: Client tried to program an invalid feature on uidb, this needs to debugged by individual clients. It could be a fatal condition to the client. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_HDR_CSM_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA00 packet header checksum error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_INSUFFICIENT_BW
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified P2MP Sub-LSP, with the specified LSP Id and destination, \ cannot be setup or reoptimized because of insufficient bandwidth. \ The first %s refers to the tunnel name, the second %s refers to \ Sub-LSP destination and the second %s refers to either \ 'setup' or 'reoptimize'. LSP Id will be always 0 (zero), if \ failure happens during setup time.), (Recommended Action: None. This is a solicited message (by \ 'logging events sub-lsp insufficient-bandwidth' P2MP \ destination configuration). User may verify reservable bandwidth \ on link as shown in the output of \ 'show mpls traffic-eng link-management bandwidth-allocation'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-RECONNECTION
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library has failed to reconnect to the SysDB server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-3-EVENT_CONN_OPEN_ALL_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-MEM_LOW
### Response:
(Severity: 3), (Category: SYSDB), (Description: An error occurred during sysdb health check. The node reporting the error is running short of memory. SysDB may not operate correctly in low memory condition.), (Recommended Action: Check the overall system and process memory usage.If it pertains to the process showing the error, then restarting the process may fix the problem. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-EVM_EVENT_BLOCK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in the event loop. Cause of the error will be mentioned in the message displayed. The error could result in Roddick PLIM driver process to be in inconsistent state.), (Recommended Action: Restart the plim_services process (process restart plim_services location <>) If the issue persists, do a cold reboot Services PLIM MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-CONDVAR_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Unable to initialize cond variable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-NO_ACL_EXT_TCAM_ALLOC
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. New external TCAM profile is set to zero percent for ACL.), (Recommended Action: Make sure that the profile is set to the desrired percentage. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPPHA-3-CDMDONE
### Response:
(Severity: 3), (Category: L2), (Description: CPP HA process has completed crashdump creation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA_TS_SVR-3-INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Time stamp server failed to perform initialization task. The initialization step where it failed and the exact error are mentioned in the message.), (Recommended Action: This could happen in a fatal situation. Such as system low on resources or communication failures. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-4-MPA_EJECTOR_OPEN_SHUTDOWN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Shutdown command received for MPA due to open ejector), (Recommended Action: Close both MPA Ejector screws)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-DROP_PKT
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS encountered an internal error while trying to process a packet (usually for output). As a result CLNS dropped the packet.), (Recommended Action: Please contact the cisco-support in case this error is seen multiple times. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_SAAR-6-DEBUG_REG
### Response:
(Severity: 6), (Category: L2), (Description: Debug message registration failed A very corner scenario with no functional impact this is just an info to the user that no debugging will be available.), (Recommended Action: This happens to be a rare case, if the message persists across every recreate memory conditions to be checked on the node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-3-CAPS_REMOVE
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS MA process encountered the specified error while trying to remove the caps.), (Recommended Action: Contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-EVM_ASYNC_ATTACH
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when attaching a handler for an Event Manager asynchronous event.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-EXTERNALERR_RC
### Response:
(Severity: 3), (Category: ROUTING), (Description: An external software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show tech-support routing ospf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-LIST
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the auto-tunnel aborted since it would have exhausted the tunnel interface scale limit), (Recommended Action: Reduce the configured/auto tunnels to below the system tunnel scale limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CORRUPT_PIE
### Response:
(Severity: 7), (Category: INSTALL), (Description: PIE file appears to be damaged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-UNMATCHEDCOPTIONS
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Filter coption index is not zero. There could be unmatched coptions'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-LINK_ORDER_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: A locally or partner-allocated Link Ordering Number which is larger than the maximum active links value has been detected. The link order signaling feature has been disabled until the mismatch is rectified.), (Recommended Action: Check the maximum active links settings on both ends of the bundle and ensure that the same value is in use.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_OPTICS_GLOBAL_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_THREAD_MUTEX_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while creating a mutex for use by a client with the specified ID. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-OPTICS_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: OPTICS enity is removed from the line card), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-7-IGNORE_GOING_STANDBY_IN_BID
### Response:
(Severity: 7), (Category: PLATFORM), (Description: My node id is in BID state received BID message from the partner node and its lower than my node id so ignoring the transit to standby.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-3-CONFIG
### Response:
(Severity: 3), (Category: L2), (Description: A configuration update has caused a problem inside the InARP code - InARP should continue but may have ignored the latest config change), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_LOSS_OF_SYNC_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on NPU-0 interface on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-VM_LICENSING_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: VM Licensing failed.), (Recommended Action: In order to continue using the feature, contact Cisco to purchase a permanent licenses and install it using the 'license add' command in admin mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-MACSEC_SHUTDOWN_ENABLED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-6-PAK_FSV_WRITE_FAILED
### Response:
(Severity: 6), (Category: IP), (Description: IPv6_IO could not write the packet specific features.), (Recommended Action: Try resending the packets again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-4-AUTHENTICATION_FAILURE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The information provided by the satellite does not match the configured information. Examine the error message for the specific error.), (Recommended Action: Verify that the correct satellite is connected and that the correct serial-number has been specified.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-3-CERT_NOT_FOUND
### Response:
(Severity: 3), (Category: SECURITY), (Description: With IKEv2 certificate authentication, sender(initiator/responder) needs to sign the AUTH DATA using the private key corresponding to the leaf certificate from the trust_point configured under ikev2 profile, this error will be printed when certificates are not found under configured trustpoint in ikev2 profile), (Recommended Action: Configure a valid trustpoint with rsa keypair label attached to it)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-NOT_SUPPORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This line card does not have hardware support for Synchronous Ethernet operation.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROMMON_BURNER-2-ROMA_BOOT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Rommon A is the backup rom image. The board will use this image to boot if the primary (Rommon B) image is corrupted. The corruption can be fixed by upgrading the primary (Rommon B) image. When the board is in this state there is no longer a failsafe mechanism - further rommon corruption could require an RMA of your board.), (Recommended Action: Upgrade rommon B and reload the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-6-ERR_3_PARAM
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with three parameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_TM_LEAF_NEW
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to create a managed timer tree leaf for the event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-3-DRIVER_INIT_FAILED
### Response:
(Severity: 3), (Category: HA), (Description: Redcon has attempted to call the platform-specific redundancy driver initialization function, but the call failed after several attempts.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-AIB_LOOKUP_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'AIB Entry not found in the shared memory.' 'This will not effect the process.' 'This operation is optional'), (Recommended Action: 'ISSU manager will use some alternate API' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-3-UNBIND_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to unbind, this may be program level issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_UCORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory uncorrectable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_TF_INTR_FIFO_0HI_OVFL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_TF_INTR_FIFO_0HI_OVFL interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable control word negotiation for a pseudowire class?
### Response:
To enable control word negotiation for a pseudowire class, use the 'control-word' command within the pseudowire-class configuration. pseudowire-class myPseudowireClass
control-word
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_SIGNAL_OVERLOAD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp discovery targeted-hello' command in IOS XR?
### Response:
The 'mpls ldp discovery targeted-hello' command is used to enable targeted LDP hello messages. Targeted hellos are unicast hello messages sent to a specific IP address. They are used to establish LDP sessions between non-directly connected LSRs, which is useful in scenarios such as establishing LDP sessions across an MPLS TE tunnel or for L2VPN pseudowires.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_2_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-1-CURRENT_STATE
### Response:
(Severity: 1), (Category: HA), (Description: The system is experiencing CPU Hog, If this condition persists for 30 seconds, the node will be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-TAM_AUTH_BYPASS
### Response:
(Severity: 4), (Category: DRIVER), (Description: 2T LC proto cards (which have serial numbers SAL2114xxxx and below) do not have ACT2 chip programmed. Since it is a known problem, as a temporary workaround, ACT2 authentication for these cards are bypassed in CCC driver, to avoid the card being powered off due to authentication failure. Card will power up, but on the XR VM, TAM services will use SWTAM and not ACT2 TAM.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-SHMOPENFAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: The packet subsystem was not able to initialize memory.), (Recommended Action: The router will not start properly with this condition.\n' 'Call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EEM-5-ACTION_SYSLOG_LOG_NOTICE
### Response:
(Severity: 5), (Category: HA), (Description: The action_syslog call from tcl script.), (Recommended Action: Please verify command(s) mentioned in tcl script prior to error message are working fine (on router prompt). If issue is still seen then please provide command details which has resulted into this error condition to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-2-CONN_SERVER
### Response:
(Severity: 2), (Category: L2), (Description: Unable to initialize connections to one or more servers. Due to this, Frame Relay support will not be available. Some processes might be blocked or, there could be a system level issue.), (Recommended Action: Collect required_info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the IS-IS Mesh Groups feature?
### Response:
IS-IS Mesh Groups are used to prevent flooding of LSPs on every link of a fully meshed network. Routers in the same mesh group do not flood LSPs received from one member to other members of the same mesh group. This reduces unnecessary flooding and saves link bandwidth.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-PTHREAD_CREATE_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: An error occurred during creation of sysDB pthread.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-PROC_INT_LIST
### Response:
(Severity: 3), (Category: OS), (Description: The interface list embedded in the activate request for the named virtual service could not be processed.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-3-BAD_SEQNUM
### Response:
(Severity: 3), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens_read API to read, it returned failure. The Ens read has returned a sequence number which was not expected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-2-ENFORCE_EVAL_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature has been used exceeding evalution period.), (Recommended Action: The customer should either register for license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-MP_DB_ALLOC
### Response:
(Severity: 3), (Category: L2), (Description: The CFM MA was unable to create a new Maintenance Point in the database. This indicates that either system resources are low, or that there is an internal problem with CFM. The set of Maintenance Points created by CFM will not match the requested configuration.), (Recommended Action: Wait until any situation which is putting stress on system resources is resolved, and then try to delete and re-apply the configuration for the affected Maintenance Points. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_A_DATABUS_STUCK_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI-A databus stuck on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-2-SRSP_STANDBY_EOBC_MCAST_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Standby RSP failed to transmit heartbeat to all nodes via standby EOBC links.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_CLNS_LPTS_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to create or remove LPTS entry on the specified interface. It may require a restart of process for recovery.), (Recommended Action: Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-3-EVENT_CONN_NOTIFY_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-7-RACK_OIR_TIMEOUT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: No response received from configuration manager server. The DSC might not be able to save its configurations.), (Recommended Action: Since the configuration was not able to save, the configuration might have to be re applied when the DSC comes back up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-SHUTDOWN_COMPLETE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The Network Processor has been shut down and it is no longer operational), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-IPV6_CUSTOM_LEM_EXIST
### Response:
(Severity: 2), (Category: FABRIC), (Description: The fia config (fia_cfg) has found pre-existing IPv6 custom-lem config. IPv6 custom lem config is rejected as two configs cannot exist concurrently.), (Recommended Action: None If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-TAIKO_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The taiko temperature alarm was encountered), (Recommended Action: Node will be shutdown immediately as hardware error occured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-VSA_NOTFOUND
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA not found in the deamon to NAS mapping table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-7-ADDRESS_DUPLICATE_RECOVERY
### Response:
(Severity: 7), (Category: IP), (Description: The IPv6 Link local duplicate address detection is restarted as interface was down earlier due to DAD. Now the interface reset occurred indicating that the earlier physical loop condition might have been cleared.), (Recommended Action: Execute show ipv6 interface to see if the duplicate address detected earlier is now cleared.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-TOP_PULSEQ_USER
### Response:
(Severity: 6), (Category: HA), (Description: This message is emitted when the system enters severe/critical pulseQ state.The top 5 pulseQ user processes will be dumped on the screen.), (Recommended Action: If the state goes to critical state kill the top process/processes in the dumped list.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_FXS-3-VLAN_EXIST_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to program FXC as normalised vlan is conflicting with an existing AC. Only on AC should use any given normalised vlan under a FXC domain), (Recommended Action: resolve and reprovision all conflicting ACs)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-6-STATUS_UPG_LOC_ALL_OPT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: It indicates the status of FPD upgrade for certain FPGAs on a particular location when location all option is used.), (Recommended Action: This is information only to notify the user that some FPGAs cannot be upgraded when using the location all option in the CLI. To upgrade such FPGAs the user is advised to use the CLI with a particular location explicitly specified. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_PATHCHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified tunnel path has changed.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-PCI_BUS_CRITICAL_THRESHOLD_EXCEEDED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A device has been detecting a PCI bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_2_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-GROUP_SEND
### Response:
(Severity: 3), (Category: OS), (Description: Unable to broadcast msg to members of PLACEMENT_GSP_GROUP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT_MEM_CACHE-7-NULL_PTR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-INTF_ATTR_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing interface attribute notification from interface manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-LINK_LOST_EMPTY_DIRECTORY
### Response:
(Severity: 7), (Category: OS), (Description: An empty directory was to be automatically purged from the QSM database. When the directory was searched for, it could not be found.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-4-ENCAP
### Response:
(Severity: 4), (Category: FORWARDING), (Description: This message indicates that an error has occurred when IP Tunnel Execution Agent was creating encapsulation header for payload traffic. Particular failure reason is included in the message.), (Recommended Action: Please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-3-EVENT_BLOCK
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The Verification Daemon failed to start processing events. This is a fatal error.), (Recommended Action: The Verification Daemon will restart automatically in an attempt to resolve the error condition. The user may also be able to identify potential system-wide issues through the error string accompanying the message and attempt to resolve these issues to assist with UDLD Daemon restarts. If the error message indicates out of memory issues Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-INCORRECT_MBI
### Response:
(Severity: 6), (Category: INSTALL), (Description: The dSC node was booted with an incorrect MBI. There are a few cases where this can occur: 1) User manually boots an MBI that is different from the MBI that RP should boot. 2) User manually sets BOOT ROMMON variable that is different from the MBI that RP should boot. 3) An install causing an MBI change without 'install commit' will have the BOOT ROMMON variable set to MBI from uncommitted software set if the dSC is subsequently rebooted.), (Recommended Action: The node will reboot to pick up the new mbi. If the node ends in ROMMON (as the config-register was not set to auto-boot) then it is recommended to simply set the config-register to autoboot and reset to boot the correct MBI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-PREFIXES_REACHED_LOW_THRESHOLD
### Response:
(Severity: 4), (Category: ROUTING), (Description: This warning indicates the number of prefixes in the specified prefix table reached the configured fill threshold. This is an informational message that may be used to alert changing trends in the number of active prefixes. This threshold is set using the 'maximum prefix {max_prefixes} {low_threshold_percentage}' command. This command can be set per virtual router (vrf) or for the main routing table.), (Recommended Action: If this threshold is regularly reached, it may no longer convey the original meaning. Either increase the fill percentage for the prefix table, or increase the number of prefixes that can be stored in the table. Both of these options are updated in the using the 'maximum prefix' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-RECEIVE_ETHERNET_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failure in receiving ethernet frame. %s- Message description. %d- Reason for the failure.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-6-SLICE_INT_CREATION_DONE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: To notify the user that interface creation done for slice), (Recommended Action: None tac_details: None)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_INFRA_LIB-3-failed_to_init_shared_mem
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to initialize shared memory.), (Recommended Action: Please contact tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-TCP_SO_OOBINLINE
### Response:
(Severity: 6), (Category: IP), (Description: Telnet client failed to set SO_OOBINLINE flag on the tcp socket. We can't continue telnet session, so exit process. Retry would help opening session.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The router can continue to be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-ERROR_DISABLING_PORT
### Response:
(Severity: 4), (Category: L2), (Description: The STP IO process failed an attempt to error-disable a port (in response to, for example, a BPDU being received on a port with BPDU-guard configured).), (Recommended Action: STP has attempted to error-disable the port in order to avoid a potential loop in the network. This port should be disabled until the problem is resolved.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-INIT
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-7-NO_NULL_TERM
### Response:
(Severity: 7), (Category: ROUTING), (Description: The given message string should have arrived with a null terminator in it. The library has repaired this, but it should not have occured in the first place. No operational impact should be visible.), (Recommended Action: This may be a temporary failure. Restart policy_repository (if message appears again) and check for re-occurence of the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_MEMMON-4-MEM_WARN
### Response:
(Severity: 4), (Category: INFRA), (Description: Memory usage is above minor threshold, state is MINOR.), (Recommended Action: Please check top five memory consumers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HOSTNAME_SYNC-4-HOSTNAME_TRUNCATED
### Response:
(Severity: 4), (Category: OS), (Description: Linux limits hostnames to a maximum of 64 characters. XR hostnames can be longer but will be truncated in the Linux environment.), (Recommended Action: 'Configure a hostname no longer than 64 characters in length.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_AGENT-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A critical error occured during the initialization of Service Agent process which involves exiting the process. The Service Agent will restart and unless the same error occurs on the next attempt the Service Agent will function normally. If the error is persistent, it indicates the system error or HW error which needs further investigation. The cause of the error will be mentioned in the message displayed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-BAD_HEAPPAGE
### Response:
(Severity: 7), (Category: HA), (Description: A heap page address is misaligned or lies in some invalid range.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-VERSION_AUTOUPGRADE_STARTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_EA-4-ERR_RWMGR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE EA encountered an error communicating with Rewrite Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Rewrite Manager Server process, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPPoE EA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred handling a message arriving at one of the Ethernet capsulation processes. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then Ethernet services may be affected on all Ether type interfaces on the given node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-RATE_LIMITER_ON
### Response:
(Severity: 1), (Category: FABRIC), (Description: Available Fabric Bandwidth is less than required by all powered on slices on the Linecard. This can occur under three case: a) Older switch fabric (RSP/FC) in the chassis than is required to support line rate on the LC; b) Not all switch fabric cards (RSP/FC) plugged into the chassis; c) Hardware failure on a subset of switch fabric cards (RSP/FC) reducing fabric capacity; d) Chassis with mix of 5-fabric and 7-fabric LC along with 12x100 LC. The FIA rate limiter is enabled to prevent over-subscribing fabric.), (Recommended Action: Please upgrade switch fabric (RSP/FC) or replace faulty hardware to get the required switch fabric capacity. For 12x100 LC to get line rate per port, it should be used in A99-HighBandWidth mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_EA-3-INTERNAL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An unexpected internal error has occurred in the IPSec SVI EA process. The process will restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_9_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-3-UNEXPECTED_PCI_CONFIG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DMAC came up with a degraded PCIe configuration. Number of lanes and Link speed does not match what is expected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_ABORT_POPULATE_FAILURE
### Response:
(Severity: 1), (Category: INSTALL), (Description: ISSU operation aborted due to the displayed error.), (Recommended Action: The error message from install, included as part of this output, may make the cause of the failure clear, in which case appropriate action should be taken to remedy the problem. If the issue is not clear from the message then the reason for the failure will need to be analyzed; collect the output of 'show tech-support issu' and 'show tech install' and forward the logs to the TAC. Provide details of any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET1_INTR_MISSING_SOP_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET1_INTR_MISSING_SOP interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD-3-ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message from FPD operation. It indicates error condition was encountered in FPD operation.), (Recommended Action: File a DDTS)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-1-I2C_EEPROM_READ_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Not able to read eeprom of the card through i2c.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-6-BSD_INFO_MSG
### Response:
(Severity: 6), (Category: IP), (Description: This is the function used for building all types of queries), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-QDR_M_WR_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multicast write when free page fifo empty on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_3_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power greater than or equal to the high Tx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_1_RX_FRAME_ERR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-1 received an errored frame interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-NODE_DEL_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: delete operation failed on system registry.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-6-WAITING
### Response:
(Severity: 6), (Category: OS), (Description: Process is experiencing delay in library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-6-RESET_REJECT
### Response:
(Severity: 6), (Category: L2), (Description: An ASIC error has occurred and requires pon-reset or hard-reset, the reset will not happen due to the other critical activity is ongoing.), (Recommended Action: This isinformational message indicating that the required error recovery action not being taken is expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: OS), (Description: XTC Agent Initialization failed. The message displays the failed operation and the error code. Due to this failure, the XTC Agent is not capable of providing path computation service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMC_GTRIE_DEBUG-3-ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: This is a catch all error message. It usually means an uncorrectible problem), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable RSVP graceful restart in Cisco IOS XR?
### Response:
To enable RSVP graceful restart, use the 'rsvp signalling graceful-restart' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp signalling graceful-restart
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR0_INTR_FIFO_URUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR0_INTR_FIFO_URUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_CONFIG_ERROR
### Response:
(Severity: 4), (Category: ROUTING), (Description: This is a duplicate configuration received for the same interface. Most likely the previous cleanup (commit replace) or removal of ISIS config was not successful (CSCsy26037/CSCsv89872). ISIS may be in unstable state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Consider restarting the IS-IS process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY_LIB-3-NULLARGS
### Response:
(Severity: 3), (Category: OS), (Description: A NULL parameter was passed to a function expecting non-NULL parameters. This will result in the operation being performed failing. If this error occurs, please capture any contextual information from the CLI, and email it to your customer support representative. A bug should be filed against the infra-filecopy-srv component.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_TCAM_MGR_LIB-3-PART_TYPE_UNKNOWN
### Response:
(Severity: 3), (Category: L2), (Description: SSE TCAM Mgr library is unable to ascertain the part type of the sTCAM device.), (Recommended Action: An LC reload MAY be required in the future to correct this. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_2_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD-4-ERROR_STARTING_AGENT
### Response:
(Severity: 4), (Category: SERVICES), (Description: The Service Role Change Agent returned an error while running on this node. The role has not been correctly applied on the specified card.), (Recommended Action: Restart the service_role_agent process on the given card manually to enact the role. Assuming no error is returned, restart the service_role_daemon process as well to resync the state and notify all interested clients. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM-2-WAVL_DELETE_FAILED
### Response:
(Severity: 2), (Category: L2), (Description: Due to wavl deletion failure, g_spa process needs to be restarted. A very rare event, the process restart will take care of this.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - Restart the g_spa process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NRS_LIB-7-ERROR
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_NETIO-3-INIT_TRACE
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of tracing for the NetIO caps. This will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-NOT_DIR
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A directory was expected, but a non-directory was passed, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OLM-7-MPLS_TE_LMP_ROUTER_ID_ZERO
### Response:
(Severity: 7), (Category: ROUTING), (Description: All existing MPLS TE optical tunnels will NOT come up until a Global or MPLS TE router ID value is specified using CLI.), (Recommended Action: Please specify a global MPLS TE router ID or a local MPLS TE LMP router ID.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-MATCH_TYPE_IN_ACL_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The following match criteria specified in an ACL are not supported as part of a QoS policy: Packet Length, TTL, TCP Flags.), (Recommended Action: remove the match criteria from ACL and re-apply)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZL-4-FPD_UPGRADE_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Upgrade of redwood firmware failed.), (Recommended Action: Failure action and reason is part of error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB_API-3-GEN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred in mrib client lib.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-DEVICE_BOOTSTRAPPED_BY_ANR
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'The autonomic network registration authority ' 'has bootstrapped this device'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_BURNER-5-progress
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Output progress to RP console.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-MAC_COUNT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Total MAC count is not matching between share memory and l2fib walk count.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_PWHE-4-EA_RETRY
### Response:
(Severity: 4), (Category: L2), (Description: The PWHE EA process has retried programming PWHE interface(s) because other processes are not ready.), (Recommended Action: If the retry does not succeeded in some time, remove and re-create the PWHE Interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOSS_OF_OUTPUT_PWR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-3-CAPABILITIES_CONFLICT
### Response:
(Severity: 3), (Category: INFRA), (Description: SLA Profile Manager encountered a packet type or action capability for which it already has an entry that differs in configuration. This new capability will be ignored. This state indicates a programmatic error of the SLA clients as either multiple SLA clients are trying to register the same capability of a single client is trying to register the same capability twice but with different configuration.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-6-PROFILE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An information message from performance profiling action.), (Recommended Action: Note the infromation presented.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Allocator was unable to allocate memory. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-7-NVRAM_SIZE_ZERO
### Response:
(Severity: 7), (Category: MEDIA), (Description: Possible error during sizing nvram, the NVRAM may not exist), (Recommended Action: 'Check if formatted and present')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-TE_MDT_MISMATCH_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-MY_DOMAIN_CERT_RENEWED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'The domain certificate of this device ' 'is renewed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_EVC_CLOSE
### Response:
(Severity: 4), (Category: L2), (Description: SSRP failed to close a connection to an essential service. This is an internal error and it requires a restart of the process for recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVENTORY_DB_SIZE_INCREASE_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Inventory database size increase failed. Can happen only if memory is too low.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-PREPARATION_COMPLETE
### Response:
(Severity: 6), (Category: INSTALL), (Description: The persistent device now has its software copied. Node will now ask instdir if it can proceed to launch the software. During turboboot, node may never get permission, and just waits in MBI-RUNNING state until all nodes reload.), (Recommended Action: No action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-DBGINIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unable to initialize a debugging flag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. ltrace init failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_DLIST_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key architectural aspects of BGP implementation in Cisco IOS XR?
### Response:
The key architectural aspects are: 1) BGP is implemented as a distributed speaker, allowing multiple BGP speaker processes to run on different nodes for scalability and resiliency. 2) It uses a hierarchical configuration model which allows common configuration to be shared among multiple neighbors. 3) It uses the Routing Policy Language (RPL) for implementing BGP policies.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv6 IO failed to initialise debugging), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-3-ENTRY_EXISTS_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Attempt to add NP entry that already exists.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support l2vpn<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support l2vpn<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-ENV_CONDITION
### Response:
(Severity: 2), (Category: PLATFORM), (Description: One or more environmental conditions exits in the chassis. If left unattended, they can result in loss of service or physical equipment damage.), (Recommended Action: Use (admin)# show environment command to determine the nature of the failure and take corrective action. If the RSP alarm LED output shows either critical, major, or minor LEDs on, there is one or more outstanding environmental conditions present. Other helpful commands are: show env led details show log | in ENV (admin)# show env trace show pfm <target nodeid> More details at ASR9K debugability wiki.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-FAILED_TO_SET_PASSWORD
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The satellite failed to set the password requested. This may result in inability to connect to the satellite via telnet.), (Recommended Action: Attempt to log into the satellite using the configured password. If this does not succeed then it may be necessary to remove and readd the password config, to restart the icpe_gco process, or to restart the satellite.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-ERR_MSG_SEND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in CPUCtrl driver due to message send failure which requires exiting the function call.The error string updates the reason for the message send failure), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-RT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> show cef platform services trace common all reverse loc <ISM> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-CARD_POWERUP_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The hardware powerup was unsuccessful due to the mentioned reason.), (Recommended Action: Card powerup is typically initiated when a card needs to power. If that fails, please collect 'show cctl trace shelfmgr loc ' from the node on which this ios-msg is seen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_BUFFER_PARSE_FAILED
### Response:
(Severity: 5), (Category: L2), (Description: There was an error reading a message sent by the specified mLACP peer device from the ICCP RX buffer. This message will now be lost.), (Recommended Action: Ensure that the ICCP Group is running as expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TTY_MGMT_CONNECT
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to tty_mgmt_connect() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
action-3-RESTART_MSG
### Response:
(Severity: 3), (Category: OS), (Description: This is a test message for action->restart message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: The system might be running low on memory and adequate amount of memory was not available to complete the request), (Recommended Action: Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-MEMORY_ERROR
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: System failed to allocate specified memory using specified allocator function. The most likely cause is a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Restart CM. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BLWM-4-RESTART_PROCESSING_ERRORS
### Response:
(Severity: 4), (Category: OS), (Description: A failure occurred while processing the requests/replies from the previous life after a restart. A best-effort attempt is made to process the requests/replies from the previous life. if this attempt fails, this error message is printed and the state is reset for normal BLWM operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_0_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-EVENT_BLOCK
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when block waiting for Event Manager events.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_OWNER_CORE-3-DLL_OPEN_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred opening a dependent DLL and loading its symbols. The process is unable to run.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: An error was encountered. The failure of this is not critical to tacacsd but may have significant impact to general system operation.), (Recommended Action: If the error persists, copy the error message and trace exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-RELOAD_REQUIRED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. NPU Power profile config will be effective after reload of LC/RP. 2. Will be removed from FCS image), (Recommended Action: Reload LC/RP for which config is changed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_BDI_DEMA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-6-LINK_STATE_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Spanning Tree Port's state change indication.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the is-type command in IS-IS?
### Response:
The is-type command is used to configure the IS-IS router type. The options are level-1 (L1), level-2-only (L2), and level-1-2 (L1/L2). An L1 router has neighbors only in the same area. An L2 router has neighbors only in the backbone. An L1/L2 router has neighbors in the same area and in the backbone and can route traffic between the two levels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_LIB-6-RP_SLOT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Information on primary RP slot number. %s-Type of the info. %d- Value of the above parameter mentioned.), (Recommended Action: NONE.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-3-RSP_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: MB application returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the partition avoidance command in IS-IS?
### Response:
The partition avoidance command is used to prevent IS-IS Level 1 (area) partitions. When enabled, IS-IS will prevent the Level 1 LSP database from becoming partitioned if only one Level 1-2 router is reachable in the area. This helps maintain connectivity within the area even if there is only one path to the backbone.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVM_ATTACH
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA failed to register a handler for the specified class of event. This is an initialization error and implies that PPPoE MA will not be able to operate correctly. The PPPoE MA process will abort and be restarted in an attempt to recover. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the PPPoE MA process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-3-COMMS_INIT_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: Lib/replicator returned a non-retryable error after the asynchronous retry thread was spawned. There is no way to return an error to the client process, so the library will force an exit to try again. A voluntary core dump should accompany this message to allow further debugging.), (Recommended Action: Collect system log information and copy core file for offline analysis. Communications debug (e.g. 'show tech gsp') may also be useful.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of user groups and task groups in Cisco IOS XR?
### Response:
User groups and task groups are used to define the permissions and authorization granted to users accessing the router. Users are assigned to user groups, and each user group is assigned one or more task groups that define the operations they are allowed to perform.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-ERR_INTERNAL_WARN
### Response:
(Severity: 4), (Category: FABRIC), (Description: FSDB encountered a minor internal software error. It is possible that fabric operates normally without any issues.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE5_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE5_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_RRW_UNLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to release rrw lock to the request record area in shared memory. This is a fatal error, the process will automatically restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-2-EXCEED_CC_LIMIT
### Response:
(Severity: 2), (Category: OS), (Description: rds write for new sequence is not able progress because ack didn't receive for previous seqnum), (Recommended Action: If this message is seen for a particular process on a particular node continously then contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you configure a BGP session with route reflectors in IOS XR?
### Response:
To configure BGP with route reflectors in IOS XR, you define the route reflector and its clients within the BGP configuration context. router bgp 65000
neighbor 192.0.2.1
remote-as 65000
route-reflector-client
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_LISTENTH_START_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: APIV bind operation failed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-3-INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The library is incorrectly installed.), (Recommended Action: This problem may be transient.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-ENCAPS_TYPE
### Response:
(Severity: 3), (Category: L2), (Description: The configuration in the NetIO DLL could not be updated, the system may continue with the existing encapsulation type), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-COUNT_ZERO
### Response:
(Severity: 4), (Category: SYSDB), (Description: The LWM connection counter has reached the zero count. Cannot decrement further. Connection to SysDB will be deleted as expected, no action is needed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-LOCK_RELEASE
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected a lock being released when it was not held.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_CRP-3-EVENT_CONN_MGR_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to open connection to Connection Manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_candidate_rp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_candidate_rp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. From the above command, use the Job ID and try the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show evm trace jid <Job ID> errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_candidate_rp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_candidate_rp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_ECD-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-LTRACE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: This error will not cause any functional impact.Only log creation and reporting won't be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_DLL_API_UNSUPPORTED
### Response:
(Severity: 3), (Category: FABRIC), (Description: API is not supported for specified reason. Check the implementation in the process calling this API.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-NODE_DB_CREATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that there was an unexexpected error within the shelfmgr database where the Node Db was not found, or could be created. This causes the shelfmgr not processed the event that it just received.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install boot-options command in IOS XR?
### Response:
The 'install boot-options' command is used to modify the boot options for the next router reload. It allows specifying the image to boot from and other boot-related parameters.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_EES
### Response:
(Severity: 3), (Category: FABRIC), (Description: FGID server encountered some issue with EES. This can happen if FGID server fails to register with EES or EES initialization or EES announcement fails.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-FANTRAY_PRESCENCE_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Envmon process failed to detect the fan tray This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Please check the fantrays is seated properly or not If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-5-NO_TIMEOUT
### Response:
(Severity: 5), (Category: HA), (Description: All event managers are now sending keep alive messages as expected.), (Recommended Action: The debugging information collected when an event manager stopped sending heartbeats should be examined and provided to technical support for analysis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-5-FABRIC_TRANSIENT_FAULT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Fabric encountered transient fabric link fault and has successfully recovered from this error.), (Recommended Action: Fabric encountered transient fabric link fault and has successfully recovered from this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-LSD_INTF_OP_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: LDP encountered some problem while trying to enable/disable MPLS on an interface via LSD server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-4-ERR_NETIO_CONN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Cannot connect to netio pak server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The SI Ether-Ctrl process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ether-ctrl location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVALIDOFFSET
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The offset into the parser tree file is bogus'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_CONFIG_GLOBAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_OOS_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_ECM_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: BFD Agent encountered an error while attempting to install an ECM notification handler for the specified path. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective MSC reboot.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-UNKNOWN_SLOT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: When deciding whether the slot belongs to the RP or not (in dual mode), an unknown slot (number) was detected'), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV4_EA-3-FAILURE2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an failure message in the ASR9K platform specific code software to indicate anomolies that are not serious failure. This failure is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect console log, traces * SH_CMD show af-ea ipv4 trace errors loc <slot number> * Also notice if the failure message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-NESTEDCOPTION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The input is invalid. The calling function and the command are displayed'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP local AS in IOS XR?
### Response:
BGP local AS in IOS XR is configured to allow a router to appear to be a member of a second AS to external neighbors. router bgp 65000
neighbor 203.0.113.5
local-as 65010
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-2-ERR_PLL_NOT_LOCKED
### Response:
(Severity: 2), (Category: FABRIC), (Description: Ingressq PLL not locked), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_FIND_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as we were looking up data for the above attach point. The operation in question do not succeed since we could not find this entry, and thus the policy_repository could be in an inconsistent state.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_9_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-7-INVALID_ARG
### Response:
(Severity: 7), (Category: INFRA), (Description: An argument was passed with an invalid value.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-2-STARTUP_ANNOUNCE_ERR
### Response:
(Severity: 2), (Category: MGBL), (Description: Under normal circumstances configuration manager announces the completion of startup configuration. If for some reason config_cli cannot connect to configuration manager then it should announce the completion of startup configuration. This is so that the administrator can perform some basic tasks like configuring the ethernet interface, format a disk, kill some processes, etc., to restore some order to the system for a subsequent reload.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-4-PRI_IP_ADDR_DIFF
### Response:
(Severity: 4), (Category: IP), (Description: When a unconfig of ipv4 primary address is performed and the current configured primary address is different from the one specified, even then the current one will get unconfigured. This warning message warns the user so if need be corrective action can be taken before the commit.'), (Recommended Action: The user can take corrective action before the commit if it is not intended to remove the current configured primary address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-DEPEND_UNBIND_FAILURE
### Response:
(Severity: 6), (Category: ROUTING), (Description: FIB internal APIs need/expect an unbind handler, which wasn't found. This can lead to FIB not cleaning up state on interface delete events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-7-send_mcast_failed
### Response:
(Severity: 7), (Category: OS), (Description: 'Failed to send a multicast.'), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-MMAP_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'MMAP failed.Map check failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-NBR_IN_DOMAIN
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'The device has been admitted into the autonomic domain'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-BAD_ATTR_LENGTH
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-4-WARN_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq encountered an error but was able recover or continue execution. This is not a serious error, but for informational purposes only.), (Recommended Action: No action is necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-4-SRV_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: A Service owner tried to revoke a request for adjacencies to be managed by the SVI Adjacency Manager. It is likely that the originally published request has not been cleaned up correctly. This should not have any adverse effects, other than the use of some additional resouces, but probably indicates some kind of programming error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-ZONE_POWER_LOST
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that zone has lost power.), (Recommended Action: Check that power modules Ax and Bx are providing power.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-6-PM_SHUT
### Response:
(Severity: 6), (Category: INFRA), (Description: The Process Manager initiated a shutdown of MLAP. This may be part of normal operation or due to some fatal error.), (Recommended Action: Determine if the event was due to a fault. If so, the root cause of the PM shut needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_CFG-3-ERR_SERVICE_CONN
### Response:
(Severity: 3), (Category: FABRIC), (Description: The npu config (npu_cfg) failed to connect with sysdb and other services. This will prevent to enable server service to provide config to npu driver. As a result asic init will not start.), (Recommended Action: Restart npu_cfg to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_PER_INTERFACE_ROUTE_INTERFACE_OK
### Response:
(Severity: 4), (Category: ROUTING), (Description: The state per interface has fallen below the maximum for the number of states allowed to be created for this interface/vrf.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISSU_FSM_TIMER_EXPIRED_ABORT
### Response:
(Severity: 3), (Category: INSTALL), (Description: The ISSUMgr FSM timed out on some node(s) during the ISSU/iMDR operation and the operation is being aborted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please retry the ISSU/iMDR operation. If the issue persists, please contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_PM_SENSOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An I2C error was encountered when attempting to read a sensor on a Power Module.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-CARD_RELOAD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The hw-module in the given location is being reloaded for the given reason), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_SVR-7-ISR_FIFO_USAGE_FLAG
### Response:
(Severity: 7), (Category: L2), (Description: The process acct_svr detected the condition of ISR FIFO ring buffer usage above or below the threshold. If the usage is above the threshold, the process acct_svr will bring the ISR FIFO ring buffer usage back to below the threshold after a while. Traffic will not be affected by this condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-BAD_CHASSIS_MAC_ADDR
### Response:
(Severity: 3), (Category: DRIVER), (Description: The MAC addresses programmed in the chassis IDPROM requires to have all the same 36-MSB. If this is not met, the number of MACs that the system can use will be reduced.), (Recommended Action: The chassis IDPROM is not correctly programmed and a RMA will be required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN-3-NO_MEMORY
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to allocate necessary memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFO_EA_PD_STUB-7-INTF_DELETE_CALLED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_LTH_FIFO_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet length FIFO full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-MBIST_DISABLED_DUE_TO_FAILURE
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. MBIST test failed on this device, as a result it has been disabled), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-EVENT_TIMER_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to initialize a timer for an event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp discovery hello holdtime' command in IOS XR?
### Response:
The 'mpls ldp discovery hello holdtime' command is used to configure the amount of time an LDP session should be maintained in the absence of LDP hello messages from the peer. If no hello message is received from the peer within this holdtime, the LDP session is torn down. Configuring a higher holdtime makes the session more resilient to temporary network disruptions but also means it will take longer to detect a genuine failure.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-BAD_IOFPGA_IMAGE
### Response:
(Severity: 3), (Category: DRIVER), (Description: The indicated IOFPGA image in SPI flash does not appear to have a valid meta-data. This means that a previous FPD upgrade operation did not finish the programming operation of the image.), (Recommended Action: Run again the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-L2VPN_SIGNALLING_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The import operations will not be done for nets whose signalling type does not match that for the importing VRF. The import operation has been ignored.), (Recommended Action: Check the topology to make sure that tow differently signalled vrfs are using different Signalling types.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-3-IMC_INTF_DEL
### Response:
(Severity: 3), (Category: L2), (Description: A failure occured while deleting imc interface via imc_interface_delete api. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: This error indicates a problem in the code and cannot be easily recovered from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-6-COMPLETE
### Response:
(Severity: 6), (Category: L2), (Description: Informational message indicating the ASIC SCAN is completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-ATTACH_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: CPP device Failed to attach.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-INVALID_CERT
### Response:
(Severity: 3), (Category: SECURITY), (Description: The certificate given by remote peer has either been revoked or expired (certificate invalid) or the signature check on the certificate failed (bad signature).), (Recommended Action: 'Contact the CA of the remote peer. Possibly bad CA certificate.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_CRC_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Decoder A CRC error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIPCLIB-6-MIPC_EVENT
### Response:
(Severity: 6), (Category: L2), (Description: Information about exceptions in MIPC client library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-CARD_OVERTEMP_CLEAR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Card temperature has returned to operating range.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP Rx power less than or equal to the low Rx power warning threshold. The XFP is the pluggable optics on the line cards. The Rx power threshold values are read from the XFP.), (Recommended Action: Verify the device and the RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-INVALID_DATA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified data is invalid.), (Recommended Action: Please collect output of the following commands: show platform show log show controller rm prm client trace <process name> all location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-3-OPERATION_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_5_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-SELECTION_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: The Frequency Synchronization manager that generated the message encountered an error during handling of an update to the inputs selected at the specified selection point. The message contains more details of the error. The change to which inputs are selected, or to the QL or priority of the selected input, may not take effect.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC_LIB-6-NO_CONTEXT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message that context was not available'), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-6-SW_Q_BP_CLEARED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPUCTRL RX PDMA SWQ Backpressure got cleared. This indicates a prevalent backpressure in SWQ being near to full and may have Rx PDMA issues prior to this msg. This is just informational and no operational impact and applicable to only CRS platform.), (Recommended Action: None. We may check 'show fabio trace loc <>' for when backpressure got set (CRS only).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-SPA_QUEUE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Creating QAD private queue for SPA process is failed. %s- Function Name. %s- spa_q_name. %d- spa bay index. %d- Error value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_MIPC_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to initialize with Metro IPC server.), (Recommended Action: Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_WINDOW_SIZE
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-UDLR_UNSUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: UDLR is not supported. This may happen if the loopback is configured.), (Recommended Action: If loopback is configured, Remove loopback before adding UDLR configuration. If the issue still persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: FABRIC), (Description: CCSQ LWM reply error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-4-PORT_DEL_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: Port deletion is taking longer time as there is large config to be deleted and so SPA driver prints out message every 2 min regarding the same.), (Recommended Action: This is a warning message. Upon seeing this message, collect the following trace log via CLI 'show plim ether info location <>' 'show plim ether error location <>' 'show tech-support ethernet location <>' 'show im trace location <>' 'show cfgmgr trace location <>' 'show vlan trace location all' Send them to the engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-EXCESS
### Response:
(Severity: 4), (Category: MGBL), (Description: There were more tokens entered as part of the command string than are required for the command.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-TXLIST_LOOP
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: TXLIST walk limit exceeded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-ACCT_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: failed to send accounting record), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-SYSDB
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process is failing to perform a sysdb operation. The operation and cause of failure in message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-TUN_NULL_IFHANDLE2
### Response:
(Severity: 5), (Category: ROUTING), (Description: This informational message appears as ifhandle of remote tunnel route is NULL. Interface must be down. It should not be NULL if interface is up.), (Recommended Action: This message is info only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-4-FIRMWARE_UPGRADE_PWR_INSUFFICIENT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: 'Insufficient power available to start firmware upgrade'), (Recommended Action: 'Please add extra power module(s) and try again.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-PROVISIONING_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: Error detected while trying to provision the device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'ip ospf cost' command?
### Response:
The 'ip ospf cost' command is used to manually set the cost of sending a packet on an interface. By default, OSPF calculates the interface cost based on the bandwidth. The formula is: cost = reference bandwidth / interface bandwidth. The reference bandwidth is 100 Mbps by default. Manually setting the cost with 'ip ospf cost' overrides the calculated value. This is useful for load balancing or preferring certain paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-INIT_BOOT_DEV_ERROR
### Response:
(Severity: 4), (Category: MEDIA), (Description: An unexpected init error condition encountered when retrieving rommon boot setup), (Recommended Action: Collect system log information. Contact TAC for support if router is unable to boot.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-PROBE_RESULTS_DROPPED
### Response:
(Severity: 4), (Category: INFRA), (Description: An error occurred while attempting to schedule processing of the the queue of probe results. As a consequence, the results for any current probes may not be recorded in the database.), (Recommended Action: The system may recover automatically. If the problem persists, it may be possible to recover by restarting the protocol process on the affected node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVC_CREATE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_PORT_1_TX_DISABLE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: On the standby RSP, BITS outputs are disabled. This prevents the sync 1 transmitters on RSP0 and RSP1 from interfering with one another when a Y-cable is installed.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-QDR_M_WR_ERR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multicast write when free page fifo empty on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-FPGA_SIPPI_REMOTE_LOS
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a timeout on some bus), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-UNABLE_TO_DETERMINE_PREREQUISITE_ORDERING
### Response:
(Severity: 3), (Category: INSTALL), (Description: While trying to determine the order of two packages (or two sets of packages), the packages in question were found to have conflicting prerequisites information. The packages will be ordered by build-time instead.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-VRF_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while deleting the VRF. An address-family table under the VRF is still not deleted. Ideally all the tables under the VRF should be deleted first before VRF is deleted.), (Recommended Action: No action is required if BGP functions properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSH_IPC_EM-3-NODEID_GET_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OSH IPC ethernet media failed to get nodeid.), (Recommended Action: restart the process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IP_EA-3-PARAM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An illegal parameter has been passed to a function in the IPv4 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to bind a local interface to a pseudowire class?
### Response:
To bind a local interface to a pseudowire class, use the 'xconnect' command within the interface configuration mode. interface GigabitEthernet0/0/0/0
xconnect 10.1.1.1 100 encapsulation mpls pw-class myPseudowireClass
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZPLL_API-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: There is no sufficient memory for allocation.), (Recommended Action: Check how much memory is available at the location where the error was reported. If the system has enough memory and if the error message persists, contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-3-FAULT_MAJOR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Major fault detected. See syslog for fault name, location and fault details.), (Recommended Action: Major fault. Find the fault name, location and fault details from the syslog. Use the show fm command on that module, use the show alarms command to see if a corresponding alarm is declared on that location. Based on the module and the fault, use the directions/wiki provided by the module owner to decide further action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_SOCK-4-ERR_LTRACE_INIT
### Response:
(Severity: 4), (Category: L2), (Description: The buffer used for tracing could not be allocated. The process will be restarted.), (Recommended Action: The most likely cause of a problem is not enough memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ERR_SET_SERVER_ENTRY
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RIB_TABLE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered during some operation for the specified address family and RIB table. This could be due either to a lack of resources or a software problem.), (Recommended Action: Issue a 'clear route <address family> <sub-address family>' to cause BGP routes to be reinstalled in the RIB. If this does not work, issue a soft or hard reset to all peers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-ERR_TUNNEL_INT
### Response:
(Severity: 7), (Category: ROUTING), (Description: Error in creating a tunnel interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTO_IP_RING-5-DUPL_AUTOIP_ADDRESS
### Response:
(Severity: 5), (Category: L2), (Description: Auto-IP Ring feature requires each device to configure a unique auto-ip address, different from those on other devices. The local device is configured with an Auto-IP address. However the local device has also received the same Auto-IP address from a neighbor device. This may indicate that two devices are configured with the same Auto-IP address.), (Recommended Action: Use the 'show auto-ip-ring' or 'show run' command on both devices to view the configured Auto-IP address. If the two devices show duplicate Auto-IP addresses, then the configured Auto-IP address on any of the peer devices needs to be changed or deleted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SI-3-ERR_MEM
### Response:
(Severity: 3), (Category: SERVICES), (Description: SI modules are failed to allocate memory due to low memory conditions in the System.), (Recommended Action: Increase System Memory or stop some applications which are not required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-FREE_MEM_ADDR
### Response:
(Severity: 3), (Category: HA), (Description: Wdsysmon was not able to get access to free memory information from kernel.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_COMMS-3-MSG_DROPPED
### Response:
(Severity: 3), (Category: L2), (Description: An incoming control message could not be fully processed due to an unexpected error.), (Recommended Action: Restarting the process in question should result in a full resync of all data. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_CHAN_SYNC_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 chan sync error on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-4-MULTICAST_THRESHOLD_CROSSED_LNK0
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Crossbar driver detected multicast queue utilization is over configured threshold.), (Recommended Action: This is a transient alarm and should clear when the multicast input traffic rate reduces. Please check multicast traffic and alarm threshold configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-3-XAUI_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt fpga detects xuai module errors), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-NETLINK_SOCKET_MAX_BUFFER_EXCEEDED
### Response:
(Severity: 3), (Category: INFRA), (Description: A buffer overrun occurred on a Netlink socket which had already reached the maximum allowed buffer size. This is indicative of a large volume of link or address state changes, or other system issues.), (Recommended Action: If the system is experiencing memory exhaustion or unexpected link/address state changes, resolve these issues, then restart the process. This will re-sync link and address state between XR and Linux. If the problem persists, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_0_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-5-RELOAD_NOTICE
### Response:
(Severity: 5), (Category: L2), (Description: Indicates the reloading operation of the SPA after the completion of the FPD image update opearation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-3-CONFIG_APPLY
### Response:
(Severity: 3), (Category: OS), (Description: The sysdb 'backend_applyonly' function returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-UNABLE_TO_WAIT_FOR_MEDIASVR
### Response:
(Severity: 5), (Category: PLATFORM), (Description: umass-enum must wait for mediasvr to be ready. If it unable to wait for mediasvr then this notice message will gets printed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-3-NOMEM
### Response:
(Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-TARGETINUSE
### Response:
(Severity: 4), (Category: SNMP), (Description: An attempt was made to unconfigure an SNMP target, however that target is still in use by one or more other SNMP configuration commands.), (Recommended Action: You must remove all other configuration commands that refer to this target before you can remove this target configuration. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>config<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>config<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-7-SYSDB_INIT
### Response:
(Severity: 7), (Category: IP), (Description: An software error occured when the TCP process try to do initialization related with sysdb process.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-HW_GASPP_WRITE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The user may have entered an invalid address that is not writable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_INVALID_SHADOW_ENTRY_STATE
### Response:
(Severity: 3), (Category: OS), (Description: Invalid shadow entry state.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_COMM-6-CARD_NOT_SUPPORTED
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message indicating that ASIC SCAN is not supported on this card and it will abort), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-INVENTORY_MANAGER_CONNECT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error. Frequency synchronization on this line card is disabled.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-6-INV_SIZE_CONFIG
### Response:
(Severity: 6), (Category: ROUTING), (Description: Provides information about the maximum size configuration cannot be apllied for tftp storage.), (Recommended Action: This is for information only. It indicates maximum size configuration applicable only for local storage. Maximum size configuration with tftp storage will be in-effective. Please remove the size configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-ALARM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Some possibilities to this message 1) An alarm has occured. If this is a PEM INPUT1 or INPUT2 failure alarm, then it means that low voltage (40V +/- 1V) or no voltage is present on the input. Due to limitations in the hardware, the 'show environment power' CLI command is inaccurate at that low voltage level and may show 0V and 0A for the readings, even though the input voltage is non-zero. In such a condition, a high amperage may also be present. Please measure the voltage/current on all failed PEMs with an oHm meter before performing any maintenance on the power supplies. 2) A previously occured alarm has been cleared. If this is 'power shelf circuit breaker error' alarm, there might be an internal wiring failure. The power shelf circuit breaker trip wire might be touching the chassis or ground. 3) Software failed to access temperature, voltage, and/or power supply alarm sensor(s) which are critical to the operation of environmental monitoring.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-TOP_PULSEQ_USERS_INFO
### Response:
(Severity: 6), (Category: HA), (Description: This message is emitted when the system enters severe/critical pulseQ state. The top 5 pulseQ user processes will be dumped on the screen.), (Recommended Action: If the state goes to critical state kill the top process/processes in the dumped list.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_INVALID_DEVICE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-NBR_OUT_DOMAIN
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'The device is removed from the autonomic domain ' ',it can happen if the domain certificate is NULL ' 'or if the domain certificate is invalid'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify the status of an L2VPN bridge domain?
### Response:
To verify the status of an L2VPN bridge domain, use the 'show l2vpn bridge-domain' command. show l2vpn bridge-domain BRIDGE-DOMAIN-NAME
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TURBOBOOT-7-DUAL_DEVICE_SPEC
### Response:
(Severity: 7), (Category: INSTALL), (Description: The TURBOBOOT setting in ROMMON had more than one disk option set. This will cause turboboot to abort.), (Recommended Action: It is incorrect to set TURBOBOOT rommon variable to more than one boot devices. Reset the TURBOBOOT variable with a single boot device name.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-DB_COMMIT_ADMIN
### Response:
(Severity: 6), (Category: MGBL), (Description: An administration plane router configuration change occurred by the specified user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Tx power greater than or equal to the high Tx power alarm threshold. The SFP is the pluggable optics on the line cards. The Tx power threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Replace the SFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-7-ERR_SYSDB_BIND
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID-DB allocator unable to bind to sysdb name space. The fgid_allocator may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-1-FACTORY_RESET
### Response:
(Severity: 1), (Category: OS), (Description: Factory reset requested. Will remove all secure objects from secure device storage.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_PFILTER_EA-3-HYBRID_MOD_TCAM_LIMIT
### Response:
(Severity: 3), (Category: ACL), (Description: Modification to an attached hybrid ACL (compressed and/or contains object-groups) is a full REPLACE operation and requires 2x available resources to complete.), (Recommended Action: 1) De-attach the ACL from all interfaces. 2) Modify the ACL. 3) Re-attach the ACL to all interfaces. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLU-6-BKT_FORCE_COMPACTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A particular table had persistent memory failures due to heavily fragmented memory. This error was unrecoverable by normal compaction mechanism. As a last resort we attempted an FORCED memory recovery technique which succeeded. This is an informational message.), (Recommended Action: No action is required because the memory failures were auto-corrected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-ERR_SERVER_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in intialising DRP pairing server process. Software will automatically do recovery by restarting the drp_pairing process.), (Recommended Action: Please collect the logs mentioned in the required_info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-LOW_VOLTAGE_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP voltage less than or equal to the low voltage alarm threshold. The SFP is the pluggable optics on the line cards. The voltage threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can BGP routes be filtered on IOS-XR?
### Response:
BGP routes can be filtered on IOS-XR by applying RPL policies using the route-policy command in the neighbor address family configuration. Policies can match on various attributes using defined sets and apply actions to filter or modify path attributes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACL_TTL_SET_NOT_SUPPORTED_ON_EGRESS
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL TTL/Hop-limit Set action is not supported on egress direction.), (Recommended Action: Remove set ttl action from ACE definition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_CORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory correctable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-INTF_ATTACH_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon was unable to attach to the packet path for the specified interface. The exact error can be found in the 'show ethernet oam interface' command.), (Recommended Action: Un-configure and re-configure the interface. If that does not resolve the problem, restarting the process will cause a retry of the attach. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOL_DEMC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_MRT-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when registering debug.), (Recommended Action: Restarting the process might help.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ADD_VSA_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failure encountered while adding a VSA.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-STBY_BACKUP_NOT_READY
### Response:
(Severity: 6), (Category: HA), (Description: RMF has determined that the standby card has backup process groups which are NOT ready because of the failure of one or more events the prevent it from being in-sync primary process groups.), (Recommended Action: Use show redundancy to see not ready reason. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_VRF_BSR_CRP_THRESHOLD_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-INDEX_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-7-CONTROL
### Response:
(Severity: 7), (Category: MGBL), (Description: An unexpected error occurred when the VTY Device DLL asked the TTY Server to perform a control operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR* *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-ACL_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to register for changes to the named prefix-list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-3-MEM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: fail to allocate memory), (Recommended Action: show process memory <> to find out whehter there is potential memory leak show memory <> to confirm system memory goes low)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-NSF_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: MRIB NSF related warning if probably Multicast is not configured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-SEND_UC_MSG
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How is LDP configured in Cisco IOS XR?
### Response:
LDP is enabled per interface using the 'mpls ldp' command under the interface configuration mode. LDP can also be enabled globally for all interfaces using the 'mpls ldp' command in global configuration mode. Various LDP parameters such as hello interval, hold time, and discovery transport address can be configured.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-2-HANDOFF_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This error means that hbagent was not able to notify mbi-hello that mbi-hello on this node should now terminate. Please collect console logging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIA-7-MEM_MAP_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: HFR RP/DRP has 2 PCMCIA slots Create a Memory mapping for all of I/O Port Space. The device can be accessed through address: Base address + port. The memory mapping function here is actually mapping the Base address. Memory input output address mapping to pcmcia driver failed.), (Recommended Action: 'Check PC card insertion, format, or unsupported type')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-7-STALE_PNODE_PURGE
### Response:
(Severity: 7), (Category: ROUTING), (Description: The router has re-elected itself DIS after initiating a purge of its L-LEVEL LSP LSP-ID due to a previous resignation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-2-FABRIC_SPINE_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric encountered multiple fabric link faults toward single spine card. Spine card is getting reloaded to recover from the fault.), (Recommended Action: Fabric encountered multiple fabric link faults toward single spine card. Spine card is getting reloaded to recover from the fault.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-4-WARN_TRAFFIC_SLAVE
### Response:
(Severity: 4), (Category: IP), (Description: The peer HSRP router has mismatching configuration. The group which is configured as a slave on the router on which this message is seen is configured as a standard non-slave HSRP group on the peer.), (Recommended Action: Check the HSRP configuration for this group on the peer device(s). Both HSRP groups must be operating in the same mode: either standard or slave.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-SIA_AUTH_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The device has not communicated with Cisco for an extended period of time and the device has not automatically renewed the entitlement authorizations. Software upgrades will be blocked once the SIA grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Customer needs to obtain a new ID token from the Cisco CSSM portal CSSM virtual account and re-register the device with CSSM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-ERR_TCAM_OVERFLOW
### Response:
(Severity: 5), (Category: OS), (Description: TCAM space is not enough for all Pre-IFIB entries in the particular TCAM region. All control packets which do not have matching Pre-IFIB entries in TCAM will use SW path to forward to destinations.), (Recommended Action: Disable the numbers of services configured for the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-ERR
### Response:
(Severity: 3), (Category: L2), (Description: fail to init debug events; sysdb fails to provide services; event mgr fails to provides its services;), (Recommended Action: pla_server would be restarted by sysmgr. check out whether there is any problems with sysdb check out whether there is any problems with the event mgr there should be error msgs from sysdb or event msg. 'show logging' could confirm this *SH_CMD sh plim pla trace info <> *SH_CMD sh plim pla trace error <> *SH_CMD sh plim pla trace all loc <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_RID_SESSION_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Remote ID has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIF_MA_DEBUG-3-LTRACE_INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: ltrace library initialization failed), (Recommended Action: System will automatically retry initialization and no further user action is necessary. If problem persists, please contact Cisco TAC for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_11_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-DEBUG_CONFIG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred whilst applying the debug configuration), (Recommended Action: It may be possible to recover by re-aaplying the last debug statement again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOC_DSX-3-NULL_PD_FIELD
### Response:
(Severity: 3), (Category: L2), (Description: The platform specific name in the link record is not set.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TURBOBOOT-6-CANNOT_RESET_BOOTENV
### Response:
(Severity: 6), (Category: INSTALL), (Description: Boot environment variables cannot be reset.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-ERR_SYSDB_UNBIND
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while using SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-4-FOP_PM_MULTIPLE_RPL_OWNER
### Response:
(Severity: 4), (Category: L2), (Description: RPL Owner node detects a No Request R-APS message with the RPL Blocked status flag set, and the Node Id differs from its own. This is a Failure of Protocol - Provision Mismatch due to a misconfiguration where there are multiple RPL Owner nodes configured in the ring.), (Recommended Action: Identify the other RPL Owner node with Node Id and reconfigure it to be a non-RPL Owner node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD_COMMON-3-SEND_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: A required control message could not be sent. The reason for the failure is detailed in the message. The failure is unexpected, and likely caused by a failure in the underlying transport. Services controlled by this process are likely to be out of sync as a result.), (Recommended Action: Restart the 'service_director' process to force a resync of all data, which will recover the lost message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error , Error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-LTRACE_INITFAIL
### Response:
(Severity: 7), (Category: SERVICES), (Description: A failure occurred during the initialization of the CGN process on a particular node. The issue is seen during ltrace operations. The process will be restarted.), (Recommended Action: This will impact the debuggabilty of CGN. Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE6_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE6_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR2_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-2 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an CPAK temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-3-PROFILE_OP_UPDATE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The SLA Client Library failed to update the operations configured to use the profile following a change to the configuration of the profile. This indicates that there was insufficient memory to meet the requirements of the new configuration and these operations will not start running until they are successfully set up again.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. The Client Library will attempt to resync itself with the Profile Manager or an immmediate resync can be attempted by reconfiguring the profile.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-REG_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'CTRLIO registration failed while registering to get' 'notifications.'), (Recommended Action: 'Registration will be attempted again.' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_COMMON-7-HW_INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to create the Platform LC Hardware in L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_PKT_MAXLEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_MGR_COMMON-6-INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_BAG_OPS-4-DEBUG
### Response:
(Severity: 4), (Category: PLMGR_UIBAG_OPS), (Description: The policy manager bag ops library debug(s) could not be initialized. The is a non-fatal error and should not affect the normal functioning of the system. The only effect of this error will be that the policy manager ui library debugs may not show up .), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED_LIB-7-STARTUP_POLICY
### Response:
(Severity: 7), (Category: OS), (Description: PlaceD discovered system placement policy specified in an unsupported format; the policy will not be honored. The system should continue to function correctly, though process placement decisions may be sub-optimal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath med always' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath med always' command is used to always compare the Multi-Exit Discriminator (MED) values for paths from external BGP (eBGP) peers. By default, MED comparison is done only if the paths are from the same autonomous system (AS). This command allows MED comparison for paths from different AS, enabling the selection of the best path based on MED even if the paths are from different AS.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_SYSMGR
### Response:
(Severity: 4), (Category: L2), (Description: The process was initialized successfully but was unable to inform System Manager of the success.), (Recommended Action: Check on the status of the sysmgr process on the node from which the error was reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-CONFIG_SCRIPT_CALLBACK_EXCEPTION
### Response:
(Severity: 4), (Category: MGBL), (Description: An unhandled exception was encountered whilst running a callback function registered by a script. The callback was attempting to perform validation, either because it was newly registered, or because a modification to the configuration that the callback is registered on was made. Note that this warning may not be seen on future commits as the callback may not need to be run again, or may not hit an exception.), (Recommended Action: No additional validation errors will be caused by this. However, the callback will be unable to perform all of its validation as intended until the function itself has been fixed. This may be done by modifying the configured script. Further details of the exception may extracted by querying the Yang model, using the command <CmdBold>show yang operational config-cfgmgr-oper:config global config-valid-ccv-oper:validation script-execution<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-5-DEVICE_FORMATTED
### Response:
(Severity: 5), (Category: MEDIA), (Description: The media storage card specified was corrupted beyond repair and was formatted. See log file for specific reason.), (Recommended Action: Media storage data should be recovered from either active card or current primary mirroring device. If not redundant card or no mirroring then reinstall software and configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-ADD_SYMLINKS_DIR
### Response:
(Severity: 3), (Category: OS), (Description: A error occured while processing a QSM configuration file. This could be due to a problem with the installed media or file system damage. QSM will continue startup-up, but some system functionality may be impared.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_RRW_LOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to aquire rrw lock to the request record area in shared memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_LCPM_SHOW-7-PARAM_ERR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Startup option supplied to HFR_PM_SHOW is not valid.), (Recommended Action: Please re-enter the correct option as described in the usage message 'Usage: hfr_pm_show [-I <intf name>] | [-N <node name>]' Example: sh controllers hfr int Ten0/2/0/0 loc 0/2/cpu0, or run hfr_lcpm_show -I TenGigE0_2_0_0 -N 33)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support software redundancy?
### Response:
Cisco IOS XR supports software redundancy through features like Inter-Chassis Redundancy (ICR) and In-Service Software Upgrade (ISSU), minimizing downtime during upgrades and ensuring continuous operation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-INVALID_MRID_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COND_DEB_RP-3-NOCONDDBG
### Response:
(Severity: 3), (Category: SECURITY), (Description: The request to use condition for a crypto debug message could not be accomplish.), (Recommended Action: If displaying of crypto debug messages is needed, please use regular crypto debug mechanism instead of conditional crypto debug mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the two main IS-IS route types and how do they differ?
### Response:
The two main IS-IS route types are L1 (intra-area) and L2 (inter-area). L1 routes are preferred over L2 routes when both exist to the same destination. L2 routes can be internal (within IS-IS) or external (redistributed).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT-1-ALM_ALERT
### Response:
(Severity: 1), (Category: SERVICES), (Description: The monitored flow has traffic issues as indicated by the react trigger. The problem is introduced either at some upstream router or even at the traffic source itself. Alternatively, a configuration mismatch between the traffic source and this router (for the flow data rates etc) can cause this error.), (Recommended Action: Check to see if traffic source is indeed sending traffic. Check that the traffic characteristics defined at the source match that on the monitoring router. Trace the traffic flow upstream to the source and verify flow-mon statistics at each applicable hop. Check for packet drops for the flow at intermediate hops - between source and the monitoring router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-4-TCAM_ERR
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Feature EA DLL encountered error in completing TCAM operation. This can lead to mismatch between hardware and software configuration.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKEND-7-INVALIDARG
### Response:
(Severity: 7), (Category: SYSDB), (Description: Invalid arguments were supplied to a backend function), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-6-INF
### Response:
(Severity: 6), (Category: OS), (Description: An INFO level message was emitted by QNET.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-3-SYSTEM_MANAGER_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The 'System Manager' is a central entity which monitors all the processes in any node. It failed to retrieve the requested job id, due to an unexpected error.), (Recommended Action: If the message recurs, issue the commands 'show tech-support sysmgr' to gather required data and contact the Cisco technical support representative with the gathered information and the exact error message as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An initialization error has occured in the hardware abstraction layer of the Forwarding information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-7-ATTACHPOINT_ADD_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: The policy_repository process was not able to add the attach point to the policy in question. This means that the policy repository will not verify the statements in this policy against the attach point in question. This could allow statements to be added to the policy that (could) result in run time errors in the client at this attach point.), (Recommended Action: Restart the policy_repository process. Please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_ROUTING_GLOBAL_DISABLE
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'OSPF routing has been disabled globally'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_T3E3-3-HW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This message indicates that SPA process detected a hardware error.), (Recommended Action: Collect the trace log via 'show plim t3e3 trace error location all' 'show plim t3e3 trace info location all' 'show logging location <>' and collect console logs and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> show cef platform trace ipv6 all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-3-CGV6_SERVICES
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in initialization of CGV6 Services . If this occurred during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: Restart the cgv6_services process (process restart cgv6_services location <>) If the issue persists, do a cold reboot Services CGV6 MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-ACTION_PARTIALLY_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: A user requested install operation has errored and partially failed. A partially failed operation is one for which an error was encountered on one or more nodes, but was successful on a RP. It may be possible to continue the operation on the remaining nodes.), (Recommended Action: If possible, the IOS-XR install infrastructure will have recovered the system to its state before issuing the command that triggered this packaging operation. Otherwise, the following recovery options are available: 1. Abort the operation to return to its previous state. This will not cause XR processes to restart or nodes to reload. 2. Reboot the failed nodes to continue with the operation. 3. Reboot the system to return to the committed state. Note further that: - The install operation history records full details of the operation, including its outcome on every node on the system, and the final state of the system. - If any of the recovery options is not available for the current failure, it will be rejected when attempted (with no impact on the system). So it's always safe to try the preferred recovery mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-PUNT_FABRIC_DATA_PATH_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A problem is detected on the system punt, fabric or data path between this RSP CPU to one or more of the network processor(s) on some line card(s).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IF_DRV-6-TRANSCEIVER_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: TRANSCEIVER entity is removed), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-7-ERR
### Response:
(Severity: 7), (Category: OS), (Description: The call is not supported during MBI boot.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_IO-7-ERR_TIMER
### Response:
(Severity: 7), (Category: ROUTING), (Description: Some error occurred in Managed Timer related operations. The text of the message displays the failed operation and the related timer construct with error code. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-HP_CONN_RECOVERED
### Response:
(Severity: 5), (Category: IP), (Description: The ntp server recovered the connection with a high-priority clock source. The Stratum tells the change of server stratum.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ATM_V2-2-SOFTWARE_PARAM_ERROR
### Response:
(Severity: 2), (Category: L2), (Description: SPA process failed due to internal software error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-INVALID_ARG
### Response:
(Severity: 3), (Category: MGBL), (Description: One or more input arguments to an internal function is invalid.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STREE-4-PORT_CREATE_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: Spanning tree port creation failed on the node. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.), (Recommended Action: Spanning tree port creation will be retried automatically. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB_MAIN-3-SYSDB_BIND_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to bind to the rack endpoint to get router inventory), (Recommended Action: Search the event logs for events/errors related to the failure reason. Sysdb is part of overall system. If there are failures here, then other processes may also exhibit similar problems. A re-attempt for sysdb bind can be forced by restarting the fsdb_fadb process on the node of interest.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_MPLS_EA-3-ERRSTR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA MPLS-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-TTY_DETAILS
### Response:
(Severity: 3), (Category: IP), (Description: 'The call to tty_details_from_device_file() failed '), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_IMDR_V1_PREP_EINVAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: One of the arguments required for the process' signal handler to successfully perform its CCI cleanup was invalid. The two pointer values are listed inside of the parenthesis.), (Recommended Action: Linecard reload. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_BDI_DEMC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-IF_IS_PART_OF_BD
### Response:
(Severity: 3), (Category: L2), (Description: Unable to assign interface because it is part of existing bridge domain, first remove this association.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-2-DEPLETION_CATASTROPHIC
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: The depletion level of the specified packet resource is catastrophic. At this level of depletion, all services and protocols on the specified node are not able to allocate packets and node may not be able to function properly unless the depletion levels improve.), (Recommended Action: Customer should monitor depletion levels using 'show packet-memory' commands. If packet memory remains depleted for significant period of time then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-SERDES_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected a serdes error on link 0.), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-CORE_CONFLICT
### Response:
(Severity: 7), (Category: OS), (Description: This happens when a process requests repeating core dump, and the next core dump is requested while the previous core was temporary dump'ed to /tmp, and still being transferred from /tmp.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XRV9K_FIB-3-RSRC_CLEAN_UP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: When process fib_mgr is re-spwned after a crash, it will clean-up all resource it had allocated as part of its recovery attempt. This error appears when freeing the specific resource encounters an error.), (Recommended Action: Please collect coredump file for process fib_mgr. Please collect output of the following commands: show log show process blocked location <> show process fib_mgr location <> show cef trace error location <> show cef trace event location <> show cef platform trace all all location <> show process dpc_rm_svr location <> show controller dpc rm trace init location <> show controller dpc rm trace error location <> show controller dpc rm trace event location <> show controller dpc rm trace internal location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-3-SYSDB_ACCESS
### Response:
(Severity: 3), (Category: SNMP), (Description: udp reads the snmp trap Q length and trap timeout from the sysdb. If udp is not able to read it then this error is printed. Or is printed when sysdb configuration for trap host does not have valid format. This is an internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-4-SERVICE_UNAVAILABLE_FOR_POWER_REQUEST
### Response:
(Severity: 4), (Category: LIB), (Description: CPI FC service is unavailable currently to satisfy the request), (Recommended Action: Wait for service to be up, check for alpha_driver process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_1_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-INSUFFICIENT_DISKSPACE
### Response:
(Severity: 3), (Category: INSTALL), (Description: Disk does not have sufficient space for insthelper to continue on.), (Recommended Action: Please remove unwanted files/directories and retry the operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-EVENT_CREATE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Create event manager failed for open_to_cnet. %s - Reason for the failure of the event manager fail.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR8
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-USES_MEM_FOR_PERSISTENT_DEVICE
### Response:
(Severity: 3), (Category: INSTALL), (Description: Could not find the persistent device on a managed device when the instdir instructed to store packages on it. Proceeding to use memory instead of the expected persistent device. Expect longer boot times. The node will continue to operate on a best-effort basis but should be looked at soon. You may see out-of-memory errors and problems with package activations on the node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NF_PRODUCER-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to intialize producer ltrace/debugs/cci/registers/atomic ring.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-3-SID_OOR_STATE_RED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The SRv6 SID manager database has exceeded the platforms resource limit. Details about the limit can be seen with <Bold>show segment-routing srv6 manager<NoBold> command.), (Recommended Action: Reduce scale of Segment Routing IPv6 entries by changing topology or VPN allocation mode in BGP from Per CE to Per VRF)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-PEC_SWITCHOPEN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The inserted expansion card is not screwed in.), (Recommended Action: PEC card is not screwed in, before removal/OIR.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-PPU_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed to complete Calvados plane by plane upgrade.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVEDGE_DATA-6-ONE_IRL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Recommendation for better IRL resiliency), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-RSP_ISOLATION_MSG_INVALID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the isolation request message from the peer RSP node contained invalid information and therefore was not accepted. RSP isolation state is a temporary debug state in which the system manager software automatically collects debug information from the affected RSP which has experienced a software failure, before resetting it. If this error message is seen, the peer RSP should have been reset already without collecting any debug information and is expected to come back to operational state following the reset.), (Recommended Action: Please collect the following information and forward it to your Cisco technical representative. 1. The console output from both RSPs. 2. <CmdBold>show tech-support shelfmgr<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-KERNEL
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server has encountered an unexpected error while using the system library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-3-CONFIG_VERIFY
### Response:
(Severity: 3), (Category: OS), (Description: The sysdb 'backend_verifyonly' function returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD_AGENT-6-NODE_REBOOTING
### Response:
(Severity: 6), (Category: SERVICES), (Description: The Service Role Agent has determined a role change requires a reboot of the specified node. This is not an error.), (Recommended Action: None. This is expected behaviour when changing the role of a card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-LOCAL_EID_MAP_REGISTER_FAILURE
### Response:
(Severity: 4), (Category: IP), (Description: 'This implies the map-sever may not have ' 'received/processed the map-register from this ETR or ' 'the map-server failed to successfully deliver the ' 'map-notify to the ETR.'), (Recommended Action: 'Ensure map-server is configured to accept ' 'map-register for this EID prefix, ETR is ' 'configured with the correct map-server key and ' 'bidirectional traffic can flow between ETR and ' 'map-server.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-INVALID_TABLE_ACCESS
### Response:
(Severity: 3), (Category: ROUTING), (Description: A client attempted to access a RIB table that does not exist.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different Inter-AS MPLS VPN implementation options?
### Response:
The main Inter-AS MPLS VPN implementation options are\n- Option 1: Back-to-back VRF (virtual routing and forwarding) connections at the AS boundary routers\n- Option 2: EBGP redistribution of labeled VPN-IPv4 routes between the AS boundary routers\n- Option 2a: EBGP redistribution of VPN-IPv4 routes with next-hop-self\n- Option 2b: EBGP redistribution of VPN-IPv4 routes with redistribute connected\n- Option 2c: EBGP redistribution of VPN-IPv4 routes between loopbacks\n- Option 3: Multi-hop EBGP redistribution of labeled VPN-IPv4 routes between route reflectors\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVC_GET_FD
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA failed to retrieve the file descriptor associated with the specified service. This is an internal error.), (Recommended Action: Consider restarting the PPP MA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-CLEAN_INVALID_DEVICE
### Response:
(Severity: 4), (Category: INSTALL), (Description: Install helper made an attempt to clean a path that wasn't on the specified boot device.), (Recommended Action: Collect insthelper traces from this reported nodes using 'show install trace insthelper'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP-3-ERR_MAX_MAC
### Response:
(Severity: 3), (Category: IP), (Description: More than the maximum supported number of MAC address filters has been installed for this interface meaning traffic to some virtual router IP addresses will be dropped. Note that for sub-interfaces the limit is per parent interface.), (Recommended Action: Reduce the number of virtual routers on this interface (or the parent if it is a sub-interface))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-3-PORT_STATE_UPDATES_BLOCKED
### Response:
(Severity: 3), (Category: L2), (Description: Updates to the port states have not yet completed for the indicated instances (or have all now been completed). Further state updates on ports with pending L2 state updates cannot sent until the update has been processed, potentially blocking important updates. MSTP will avoid direct creation of loops (e.g. where two links swap between blocked and forwarding), but in some cases transient loops may be created by peer devices responding to the port role changes. The 'show spanning-tree <instance>' command can be used to identify which port instances are impacted.), (Recommended Action: This condition will normally clear by itself within a few minutes. If no clear message is seen within several minutes and no other system operations are ongoing (e.g. configuration, LC OIR), then restarting the stp_controller process may resolve the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROTO_NPMB_LIB-3-SHMSTATS_MAP_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while trying to map to the ipv4 io netio shared memory stats. The error will provide the reason why stats init failed.), (Recommended Action: This will cause the netio process to restart and retry again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-NODE_NAME_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Failed to get the local node name from platform library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-CHKPT_NDT_RECEIVED
### Response:
(Severity: 4), (Category: L2), (Description: The CFM Global Manager received an unexpected checkpoint NDT notification when running on a standby RP, which indicates that CFM Domain and Service configuration has changed. CFM is unable to guarantee that MIB index values for accessing Domains and Services over SNMP will be correctly maintained across process restart, RP failover or an ISSU operation.), (Recommended Action: CFM should continue to operate normally, expect for possible re-ordering of MIB index values for any configured Domains and Services. CFM will have tried to correct any errors it encountered in the checkpoint database. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel backup load-share feature?
### Response:
The MPLS TE tunnel backup load-share feature allows the control of how traffic is load-balanced between two or more parallel backup tunnels that protect the same interface. By default, load-balancing is based on a hash of the packet header fields. Optionally, the backup load-share value can be specified manually to control the proportion of backup traffic to each tunnel.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-2-DYING_GASP_SRC_ADDR_NOT_FOUND
### Response:
(Severity: 2), (Category: SNMP), (Description: 'Host address is not reachable and hence snmp has failed to find the source address'), (Recommended Action: 'Make host ip reachable. Remove and add snmp dying gasp host config to genereate dying gasp trap')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_PROTECTED_FABRIC-4-MGID_RESYNC_START
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_DPM-3-FAILED_TYPE_GET
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Whilst attempting to determine whether an interface is configured as L2 Fabric, an unexpected error was encountered. If the interface is configured as L2 Fabric, it may not operate correctly in some networks.), (Recommended Action: Recovery can be attempted by removing and readding the satellite-fabric-link configuration to the affected interface(s). Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-5-LTRACE_INIT2
### Response:
(Severity: 5), (Category: HA), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: Tracing will not work properly. Process will proceed running. Can restart the process to overcome this issue. IF error persists.Collect the error log with return value and core dump of the process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_BAT_FAIL_A
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Battery Failure A (SAT_BAT_FAIL_A) alarm is raised when the battery A fails. This could be because the battery is removed or is not operational.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the significance of the 'install commit' command in Cisco IOS XR?
### Response:
The 'install commit' command in Cisco IOS XR makes the added software packages permanent, ensuring they remain active across system reboots.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-3-INCORRECT_SELF_LVID_FIXED
### Response:
(Severity: 3), (Category: INFRA), (Description: Sysadmin self lv index is incrrect, but it is fixed now. Further investigation required on why self lv was incorrect. You can run the command 'show tech-support install' to collect more details.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-1-SVC_ALERT
### Response:
(Severity: 1), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-STUB_ASBR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Router is configured as an ASBR but is only connected to a single stub area. This can waste resources since the router has nowhere to send the external LSAs that it is generating.), (Recommended Action: Check configuration and disable redistribution of routes into ospf if appropriate.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-4-DSCP_EXTRACT
### Response:
(Severity: 4), (Category: IP), (Description: An error occurred whilst trying to extract dscp configured value. Server will use default dscp value instead.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-CERR_REGISTER
### Response:
(Severity: 3), (Category: OS), (Description: The QSM error number/messages table could not be registered with the cerrno system. Error translations will not be available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_OTN_LOF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN hub and spoke feature?
### Response:
The MPLS VPN hub and spoke feature allows a VPN to be configured in a hub-and-spoke topology, with the hub PE router importing and exporting routes to and from spoke VPN sites. It simplifies VPN connectivity and provides a way to share services from a central site. Hub and spoke VPNs are implemented using route target import/export between hub and spoke PE routers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-PRIMARY_BOOTLOADER_SB_FAIL
### Response:
(Severity: 4), (Category: DRIVER), (Description: FPGA detected the Primary Bootloader Secure boot failure This could be due to failure during the Bootloader upgrade. FPGA will try to boot from Golden Bootloader. Failure to boot from Golden will put the card in un-recoverable state.), (Recommended Action: This is an indication that Primary Bootloader FPD upgrade failed. Failure to boot from Golden Bootloader, shall be an indicator for RMA)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIER-2-PCIE_LINK_ERR_FATAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: one or more critical links on PCIE root ports are down), (Recommended Action: The board will be reloaded. Switchover would occur if standby RP/RSP is NSR ready.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-RAW_OUTPUT_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error has occured when OSPF is in process of sending a packet to the the raw socket.), (Recommended Action: This is an indication that error(s) has occured in other components and it is impacting OSPF's ability send data. No specific actions are required for OSPF.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-PLATFORM_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unknown platform type. %s- Message. %s- Function Name. %s- Message.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_HQ_FULL_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 1 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-DSC_REG_FAILED
### Response:
(Severity: 4), (Category: HA), (Description: sysmgr_register_lr_event failed to register for DSC notification event), (Recommended Action: Collect all logs, especially those from wdsysmon. Also collect output from 'show watchdog trace'. Forward the messages to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-BOGUS_HOOKPOINT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Bogus hook point'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_V6FIB_RP-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform IPv6 FIB, Error information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
B_SHIM_PARTNER-3-CAP_CNTL_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is an error when modifying channelized interface caps.'), (Recommended Action: Perform below steps and see if error goes away: 1) SPA process restart by executing CLI: 'process restart <spa_process_id> location <> 2) Netio process restart by executin CLI: 'process restart netion location <>' 3) SPA reload by executing CLI: 'hw-module subslot <> reload')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an LDP router ID?
### Response:
To configure an LDP router ID, use the 'mpls ldp router-id' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#router-id 192.168.1.1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-ERR_EDM_OPEN
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failure in Inventory Manager event connect open), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSUB_MA-6-FSOL_DROP_DUP_IP
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: BNG dropped an Fsol as IP address matches with an already existing subscriber on the box. This usually occurs due to misbehaving user(s) or improper IP address management. BNG blacklists the Fsol for next 2 minutes and do not process any further Fsols from this particular user during this time. Note: BNG checks for IP address uniqueness only if duplicate-address-detection is enabled on the access interface (command: address-unique).), (Recommended Action: Check whether the issue is caused by misbehaving user(s) or improper IP address management and take necessary action accordingly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-STBY_STANDBY_NOT_READY
### Response:
(Severity: 6), (Category: HA), (Description: Redcon has determined that the standby card is NOT ready because of the failure of one or more events the prevent it from being in-sync with the active card.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPMCE-3-ERR_SET_REBOOT_CAUSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The failure on setting reboot cause to syspage before performing Kernel Dump.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-BOB_STD_MISMATCH
### Response:
(Severity: 3), (Category: L2), (Description: The BFD session running on the bundle member interface, received packets meant for a different BFD over bundles mode of operation.), (Recommended Action: Use the 'bfd bundle per-member mode' global configuration command in the local or the peer device to ensure that the BFD over bundles mode of operation - IETF or Cisco, is set to be the same on both the peers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-ADJ_SANITY_CHK
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB entries have somehow set REMOTE_FLAG for TX ADJ. This should not happen - remote flag should only be set for RX ADJ.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-6-LICENSE_CLEAR_NO_FEATURE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The 'clear license' command was executed, but there are no feature licenses installed to be cleared on this system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_POLICY-3-ORA_RUN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_PKT_MAXLEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-GN2412_CHIP_DOWN_CLEARED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: GN2412 chip register reading 0xff issue cleared.), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-SYSDB_DATALIST_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error message occurs because of the failure while extracting the data from the database.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>), show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key attributes specified in a process startup file?
### Response:
The key attributes in a process startup file include\n- Process name, path, and instance count\n- Startup level (controls start order)\n- Placement (whether process can be started on any RP or LC)\n- Restarting enable (whether sysmgr should restart on failure)\n- Criticality (whether process failure should trigger node restart)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-4-WRONG_IDPROM_CONTENT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: MPA manager has detected that there is incorrect content in the IDPROM of indicated module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-DEV_QSFP_SUPPORTED_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An QSFP+ supported error was detected during QSFP+ initialization. This error is reported when the QSFP+ type can not be determined or it is not supported on the platform. The QSFP+ is the pluggable optics on the line cards. QSFP+ initialization may happen when linecard boots up, QSFP+ OIR and line card process restart. The optics will not be enabled if an QSFP+ supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-BAD_MPAFPGA_IMAGE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The indicated MPAFPGA image in SPI flash does not appear to have a valid meta-data. This means that a previous FPD upgrade operation did not finish the programming operation of the image.), (Recommended Action: Run again the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_POGO-4-HW_INIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to initialize the Platform LC Hardware in L2FIB component.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-7-ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An unexpected error condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_SHOW_PROCESS-7-NO_MEM
### Response:
(Severity: 7), (Category: HA), (Description: Allocating memory failed due to a low-memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-MASA_AUDIT_LOG_FAIL
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'The manufacturer authorised signing authority ' 'audit log doesnt contain this device in its database'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKGFS-4-LOADPATH_STR
### Response:
(Severity: 4), (Category: INSTALL), (Description: 'The node boot up failed while trying to decode the loadpath string' 'The node will reload and try to recover.'), (Recommended Action: 'The node will restart automatically and try to boot-up.' 'If the node doesn't recover after reload contact TAC with 'show tech install'' 'and console logs.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFMMIB-3-NO_TRAP
### Response:
(Severity: 3), (Category: L2), (Description: In the initialization of the DOT1AG/MEF SOAM MIB DLL an error occurred while trying to enable SNMP trap support. No traps will be sent until the mibd_interface process is restarted and this registration succeeds.), (Recommended Action: Continue working with the DOT1AG/MEF SOAM MIB DLL without the ability to send traps when events occur or restart the mibd_interface process so that there is another attempt to register for traps. If the error message indicates an out of resource condition Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable MPLS L2VPN on a Cisco IOS XR router?
### Response:
To enable MPLS L2VPN on a Cisco IOS XR router, use the 'l2vpn' command in global configuration mode. l2vpn
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-4-SHM_LOGGING_ERR
### Response:
(Severity: 4), (Category: OS), (Description: Shmwin server failed to retrieve shmwin logging information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The dsc process could not allocate memory. This indicates some problem with the system wide memory.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-FXC_MISSING_TAG
### Response:
(Severity: 3), (Category: L2), (Description: Each interface going through an EVPN VPWS flexible xconnect must have a valid (not null) Ethernet tag. Untagged traffic is not allowed.), (Recommended Action: Modify the rewrite tag so the calculated Ethernet tag is not null.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-MPLS_BGP_LU_LABEL_IMPLICIT_NULL
### Response:
(Severity: 2), (Category: ROUTING), (Description: Hardware does not support implicit null BGP LU label), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-7-MY_NODE_TYPE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the card type is invalid, or the infrastructure is behaving incorrectly. The current request or operation may not be carried out.), (Recommended Action: Upgrade to latest OS release. Check for unsupported hardware.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_MRIB_BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-REG_PROC
### Response:
(Severity: 7), (Category: HA), (Description: Unable to write the Registered Process name to a file in harddisk:. The show command to list OOR aware process might not list all the registered process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE-3-ERR_SHMEM_MMAP_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to mmap the shared memory fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-RSP_IM_PCIE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCI access Failure/Success while accessing device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_EA-3-UNABLE_TO_RESYNC
### Response:
(Severity: 3), (Category: SERVICES), (Description: In order to correct any problems, the Interflex EA will reconnect to IM to prompt a resync. If this message is displayed then this resync is failing. This may cause configured interfaces to no longer forward traffic, or interfaces which have been shut down or deleted to continue to do so.), (Recommended Action: Firstly the processing displaying this message should be restarted. If this fails to solve the issue, then the configuration should be removed and readded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-SYSDB_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A fatal error occurred during sysdb_register_notification for fpd process. FPD process failed to upgrade the new fpd image. LC works with compatible IOS image and compatible fpd image. If the IOS image is incompatible with the existing fpd image then all interfaces will be down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-4-WARN_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The HSRP process failed to initialize correctly. In this situation HSRP restarts, but HSRP may not recover if there is a persistant error in the IOSXR system and HSRP is later unable to reestablish its connections and initialize successfully.), (Recommended Action: If HSRP does not restart and automatically recover, do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX8749_CDMA-3-INVALID_ARG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error has occured as a NULL parameter has been passed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-OPERATION_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational condition and/or failure. The process can continue functioning as expected despite the failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSH_IPC_EM-6-DEBUG_INIT_FAIL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Debug initialization failed within driver dll. Debugs may not be printed), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: The system is low on memory and not enough was available to complete the request), (Recommended Action: Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-BASENAME
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to basename failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-7-NHOP_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Received NHOP MODIFY to change rx/tx TLU address in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp fast-external-fallover' command in IOS XR BGP configuration?
### Response:
The 'bgp fast-external-fallover' command is used to immediately reset a BGP session if the link to a directly connected external peer goes down. By default, BGP waits for the hold-timer to expire before tearing down the session. This command overrides that behavior, allowing for faster detection of link failures and quicker convergence.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-5-SESSION_LIMIT
### Response:
(Severity: 5), (Category: OS), (Description: Number of PCEP sessions exceeded the limit, and the new session is rejected.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-BGP_LU_TO_MPLS_SAME_GID
### Response:
(Severity: 2), (Category: ROUTING), (Description: Label transition failed because a label was updated from bgp to igp with same GID value.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-IFHDL_QUERY_FAILURE
### Response:
(Severity: 4), (Category: ROUTING), (Description: This message appears when the Interface handle query to Intf-Mgr fails. This may result into functionality issue. Check the BGP configuration for this interface and re-apply.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_LOCAL-3-CTRLR_INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during initialization with a necessary service for a particular interface type. The process is unable to run.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_LOSS_WL_LOCK
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_PMLIB-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Platform Manager client library encountered a fatal error and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: Check if the process is blocked using- 'show process blocked location <r/s/i>' if the pm process is blocked restart the process using- 'process restart <process name> location <r/s/i>' to recover from this error. Please collect output for 'show log location <r/s/i>' and 'show memory summary location <r/s/i>' from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An informational message about an expected event as described by the message.), (Recommended Action: This message provide the information about an expected event. No further user action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-VOQ_MSG_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The message received was found to be corrupted. The process ltrace will have more information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-5-HA_NOTICE_START
### Response:
(Severity: 5), (Category: ROUTING), (Description: First log upon process startup.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-IPC_SEND_TIMEOUT
### Response:
(Severity: 3), (Category: L2), (Description: l2vpn_mgr has failed to send a message to another process during initialization. In cases where local nodes are slow to boot this may be observed as a transient condition. l2vpn_mgr will restart after a certain number of failed attempts. Traffic may be impacted if initialization is not completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-RSPI_CAL_ECC_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RxSPI Calendar ECC single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_ALIVENESS_FAILURE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-TSP_TDDR_TIMER_JUMP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSP Tx DDR timer jump.), (Recommended Action: Minor error, no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-3-EVENT_CONN_CREATE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error was detected when trying to create event connection for FM with netio or sysdb.), (Recommended Action: The error can be seen when the connection to netio or sysdb couldnot be achieved. In this case the netio or sysdb process may not be UP yet. There is a retry mechanism to handle this issue. If the issue continues, restarting netio or sysdb may fix.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SRVR_ENGINE-3-ERR_2SD_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: SKS server exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPT-3-DBGTCAM_ASIC_ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ASIC attach failed for DBG TCAM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FTI-3-ALLOC_ERR
### Response:
(Severity: 3), (Category: INFRA), (Description: Auto-config allocation from the global pool failed), (Recommended Action: Free up previously allocated resources and then retry.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PMLIB_IM-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: svc pmlib IM encountered a fatal error and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-DEV_XFP_PID_NOT_SUPPORTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PID not supported error was detected during XFP initialization. A PID not support error is reported when either the PID can not be read or not supported on the platform. The XFP is the pluggable optics on the line cards. XFP initialization may happen when linecard boots up, XFP OIR and line card process restart. The optics will not be enabled if a PID not supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the XFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-ALARM_EVENT_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that shelfmgr has problem in handling events for setting LED display or alpha display.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MIN_LEN_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error FIA 10 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-FAILED_TO_ALLOCATE_RACK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that memory allocation failed while adding the rack to queue Shelf Manager), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-CAUSE_HBLOSS
### Response:
(Severity: 2), (Category: PLATFORM), (Description: User ran a heartbeat test utility to create heartbeat loss.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-4-PEER_TIME_MISMATCH
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The Slave side session may not be stable.), (Recommended Action: Refer the SRG Configuration document.Recommend to use NTP configuration documents.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_AHS_LOS_LANE1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_NPH_LEN_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Invalid egress NPH length detected on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Encountered an unexpected internal error.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR RSVP hello state timer feature?
### Response:
The MPLS TE FRR RSVP hello state timer feature allows the configuration of the RSVP hello message interval and missed message threshold for backup tunnels. RSVP hello messages are used to detect the loss of connectivity between the backup tunnel headend and tailend. Tuning the timers allows faster detection of backup failures while avoiding false alarms.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-MMAPFAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: The packet subsystem was not able to initialize memory.), (Recommended Action: The router will not start properly with this condition.\n' 'Call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSMGR_CALL_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Once all the initialization is done, dumper sends a proc_ready message to sysmgr to tell sysmgr that dumper is alive and running.Unexpected failure of this call may lead to unexpected behaviour of dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show-tech sysdb 7. If possible please collect debug messages of dumper. 8. please copy out sysmgr.log)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIC_UDI-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message occured due to some reason. This is not a failure, the process can continue functioning as expected.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-RIB
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external RIB function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all - show ospf routes - show route ipv4 <prefix> detail - show rib ipv4 clients. Find the client ID of the bcdl process that is in the insync state to plug into the next command. - show rib ipv4 client-id <bcdl-id> redist history)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-4-INTF_OPERATION_STALLED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An Interface Manager or Config Manager operation has been retrying unsuccessfully for a number of times - retries will continue until the operation is successful or the operation is cancelled. This issue is most likely to occur if there has been an attempt to configure the feature beyond supported scale or with other invalid parameters. Until this is resolved then the programming of the affected interface may be incorrect.), (Recommended Action: If this is seen following a change in system configuration that results in the feature exceeding the supported scale then remove the configuration and restart this process. If the system has not been configured beyond the supported scale then seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The Service Platform Manager encountered an provisioning warning.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP-3-ERR_NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: The process was not able to allocate the memory that it needed to complete the operation. FHRP functionality may be reduced until the problem is resolved.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPMgr-3-MEM_ALLOCATE_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error due to memory allocation failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-3-ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Critical error message from library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-NOT_INDEXED
### Response:
(Severity: 7), (Category: HA), (Description: Errors (most likely lack of memory) prevent checkpointing from creating an index structure associated with an indexed table. This condition does not affect the functionality at all, only the performance will suffer.), (Recommended Action: The checkpointing software will periodically try again to set up the index structure. So, in general no action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_LWM_ATTACH_SYNC
### Response:
(Severity: 7), (Category: HA), (Description: The event_message_attach function reported an error trying to attach to handle synchronous messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-L2VPN_DEL_ADD
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected that an attempt was made to instantiate an L2VRF when the instance is in the process of being deleted. This will happen when the router-id is unconfigured, configured with another value and reconfigured with the first value all in very quick succession.), (Recommended Action: This msg is info only. At this point BGP and L2VPN will be out of sync Need process restart to achive sync)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_Driver-2-UPGRADE_ERROR
### Response:
(Severity: 2), (Category: INFRA), (Description: Update FPD upgrade Error), (Recommended Action: The reson for failed FPD upgrade to be analyzed. Please contact Cisco Technical)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-5-GO_ACTIVE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Card is becoming active.), (Recommended Action: No action required, just informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-XC_ERROR
### Response:
(Severity: 6), (Category: L2), (Description: A change in the cross-check status of a peer MEP was detected. This may indicate an expected peer MEP configured by cross-check is missing, or a CCM message has been received unexpectedly from a peer MEP which was not configured for cross-check, or that one of the above errors has been cleared. This message appears because the service which the peer MEP belongs to has cross-check error change logging configured.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-7-OUT_OF_TX_BUFS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This indicates we ran out of TX buffers, maybe due to low memory on node. i), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_GLOBAL_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSR-2-DS_ADVT_REPLICATION_FAILURE
### Response:
(Severity: 2), (Category: INFRA), (Description: A System or Rack scoped advertisement has not been correctly distributed to all relevant nodes in the system. Depending on the service name identified in the message, features requiring that service might be impacted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-DEVICE_ALLOWED_BY_ANR
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'The autonomic network registration authority ' 'has authorised this device to enter its network'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the CGN process on a particular node. The process will be restarted. Until the process starts successfully, any), (Recommended Action: Try restarting the CGN process showing this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_8_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-MAXPFX
### Response:
(Severity: 5), (Category: ROUTING), (Description: Number of prefixes received from a neighbor for a given address family has reached the warning level configured with the 'max-prefix' command.), (Recommended Action: Check the prefixes received from the neighbor and verify whether the limit should be increased, or the neighbor is sending more prefixes than expected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_PKT_F2_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 2 single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-MEMBER_ENCAP_SET_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to set encaps.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN Inter-AS feature?
### Response:
The MPLS VPN Inter-AS feature allows MPLS VPN services to span multiple autonomous systems. It enables VPN connectivity between sites attached to separate autonomous systems. There are different options for implementing Inter-AS MPLS VPN, with varying levels of scalability, isolation, and complexity.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-ASYNC_PULSE_SEND_FAIL
### Response:
(Severity: 3), (Category: L3), (Description: A failure has occured in communication between the IPv6 Neighbor Discovery (ND) process (ipv6_nd) and the ND spoofing process (ipv6nd_lite). This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart.), (Recommended Action: Check that the ipv6nd_lite process is running and restart it if necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TC_SERVER-3-PROC_SHUTDOWN_OOM
### Response:
(Severity: 3), (Category: ROUTING), (Description: TC_SERVER process exiting due to unknown/critical node memory state.), (Recommended Action: Start 'tc_server' process after memory state goes normal.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-7-GENERAL_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: Certain operation failed due to unexpected error. The message displays the reasons.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_PKDFMTSTR
### Response:
(Severity: 4), (Category: SYSDB), (Description: The packed tuple format string should only contain combinations of '%', 'd', 'ld' and 's'. A character other than one of these was found in the string.), (Recommended Action: Check that the format string is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX8749_CDMA-3-DEBUG_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Debug initialization has failed, this might be a program level issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_CLIENT-7-CALLBACK_NOT_REQUIRED
### Response:
(Severity: 7), (Category: HA), (Description: Some clients wishes to store their records in NBO format. In such cases, there is no need to register callback DLL with chkpt since no X86 transformation is needed in such cases.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A general failure occured while executing a resource function. The message contains info about the cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2C-4-WARN_INIT
### Response:
(Severity: 4), (Category: L2), (Description: The L2VPN Uberverifier process failed to initialize correctly. In this situation it restarts, but may not recover if there is a persistant error in the IOS-XR system and the L2VPN Uberverifier is later unable to reestablish its connections and initialize successfully.), (Recommended Action: The Uberverifier is not essential for system operation. However, if it is not running as intended, it may be possible for a misconfiguration to be allowed. If this persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-3-CAPABILITIES_MALFORMED
### Response:
(Severity: 3), (Category: INFRA), (Description: SLA Profile Manager encountered an action with malformed capability information. Consequently, the action capability will be ignored. This state indicates a programmatic error of the SLA clients in providing invalid action details.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-EA_MESSAGE_DECODE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: ELO Daemon has recieved a notification message from the ELO EA process, but is unable to parse it.), (Recommended Action: The ELO Daemon process will restart in an attempt to resolve the issue. A corefile is being gathered for analysis. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-SELECTION
### Response:
(Severity: 4), (Category: L2), (Description: There has been a misconfiguration resulting in the problem described being hit in the Selection Logic operation for the bundle.), (Recommended Action: Correct the misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_ALIVENESS_FAILURE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_ARG_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred due to invalid argument as input to the function in stats infra component.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CBC-3-CANBUS_PWR_FUSE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CBC has detected power fuse failure. The proper functioning of the board requies that the current drawn be within the rating of the boards power fuse.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-7-OPEN_FAIL
### Response:
(Severity: 7), (Category: L2), (Description: An error occurred in the PSE ASIC while opening log file This will have an impact on debuggability of the system.), (Recommended Action: Copy the error message exactly as it appears on the console)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_PROXY-4-ERR_LTRACE_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: The fabric proxy could not open/initialize the ltrace buffer. The proxy and the system should stll function as normal, with the exception that ltrace will not be available.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel backup load-share feature?
### Response:
The MPLS TE tunnel backup load-share feature allows the control of how traffic is load-balanced between two or more parallel backup tunnels that protect the same interface. By default, load-balancing is based on a hash of the packet header fields. Optionally, the backup load-share value can be specified manually to control the proportion of backup traffic to each tunnel.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ISSU_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Fatal error in one of the ISSU apis.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-INCONSISTENT_SERVER_RETURN_VALUES
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered unexpected return values from the shmwin_svr. This error indicates that unexpected or inconsistent values were returned from the shmwin server. This may indicate that a portion of the shared memory virtual address range, managed by the shmwin_svr, has been leaked. If the problem recurs persistently, it could become a service impacting condition.), (Recommended Action: If this message occurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show tech-support shmwin - show shmwin trace all location 0/x/CPUx - show shmwin trace server location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-DIAG_RUNNING
### Response:
(Severity: 4), (Category: DIAG), (Description: A diagnostic test is currently being run on the specified card and additional tests cannot be run until the previously requested tests have been completed.), (Recommended Action: The system is working properly and no user action is required. If you want to run the specified diagnostic test, either wait for the current diagnostic test to finish and then run the test, or stop the current test and run the new test.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-NRS_REGISTER_BULK
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses NRS API to bulk register class. nrs_register_bulk API in nrs library failed.), (Recommended Action: This is a debug message.No Action required. If problem persists,Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_QFPCPUCTRL-1-BOARD_REV_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: CPU controller board revision (MB.DB) mismatch. MB = Mother Board, DB = Daughter Board.), (Recommended Action: Upgrade the CPU controller FPGA image, and reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_COMPLETE_PHASE_FINISHED
### Response:
(Severity: 6), (Category: INSTALL), (Description: The complete phase of an ISSU operation has finished successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-SYSMGR_FAIL
### Response:
(Severity: 4), (Category: INFRA), (Description: The process has failed to inform System Manager that it is shutting down. The process will exit anyway, but it is possible that any configuration entered will not cause SysMgr to restart the process. In this case, a timeout will occur when committing configuration, and the config will fail to apply.), (Recommended Action: If configuration fails to apply, recommitting it should correct the issue. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-DEBUG_CONNECT
### Response:
(Severity: 7), (Category: OS), (Description: debug print before msg_chan_connect), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-SELECT_SEGMENTS_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Core dump failed because selecting process segments in sparse mode failed. Core file will be truncated.), (Recommended Action: Do not configure process core options to take sparse core unless required. Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN-3-DLLMAIN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error message from debug initialization module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-QUEUE_CLEAR_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: failed to clear internal queue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-BOARD_REV_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RSP CPU controller driver detected a board revision parity error.), (Recommended Action: Reset the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you remove inactive packages that are no longer needed from the boot device?
### Response:
To remove inactive packages from the boot device and free up disk space, use the `install remove inactive` command. For example\n```\nRP/0/RP0/CPU0:router# install remove inactive\n```\nThis command deletes inactive packages that are not part of the currently committed software set.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-BIND_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: SysDB bind message from a client was not interpreted properly and resulted in the error shown.), (Recommended Action: This message may appear due to transient error and can be safely ignored as all clients will retry the bind operation. However, if this repeats there could be an issue with the client process or sysdb. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_3_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_PKT_LEN_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 0 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_ETHERNET-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred initializing a necessary module of the ICPE Ethernet Controller MA DLL. The process is unable to run. Restarting the process by retrying the operation may clear the issue or indicate that the system is in a unstable state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-4-SAT_SPEED_DUP_DEGRADE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a notification to user that the speed / duplex parameters of a particular port set to auto negotiate has degraded post negotiation from its maximum capability due to either lower capability of the peer or the the peer not able to engage in auto negotiation.), (Recommended Action: This might require some manual config changes for other dependent features such as Sat QoS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-MSG_REPLY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to send message reply. lc_upgrade_fpd process sends a reply message to RP so that RP is unblocked by calling msg_reply().), (Recommended Action: Please try to issue upgrade command either parallel or single card upgrade and see if the upgrade goes well. If not, RP is not unblocked, subsequent FPD upgrade command issued may not be executed. In this case do a RP switchover or reboot the RP. If that too fails call Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP IGP synchronization?
### Response:
To configure LDP IGP synchronization, use the 'mpls ldp igp sync' command in interface configuration mode. RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-if)#mpls ldp igp sync
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-6-FAULT_SUPPRESSED_EVT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Useful general info logged by the Platform Fault Manager that can used to establish a sequence of events that occurred in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-6-ERR_TIMER_INIT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An error occurred in stats infra component timer initialization function. The error string gives the reason for the error.), (Recommended Action: Restart the process using CLI command in exec mode -process restart statsd_server If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-5-SYNC_DONE
### Response:
(Severity: 5), (Category: SUBSCRIBER), (Description: The requested sync of subscriber sessions has been completed. This is in response to CLI command and any inconsistencies in the state between the peers would have got resolved.), (Recommended Action: None required since this is in response to an administrative action that caused this synchronization of sessions. Subscriber status may be checked on the router to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-FPD_UPGRADE_REQUIRED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A new version of the PUNT FPGA is required for the system to be operational. Consequence is that there would be diagnostic test failures which will result in the card to be rebooted. This alarm means the FPGA is running the older image.), (Recommended Action: Please try 'admin 'upgrade hw-module location <RSP loc> fpd Cha-FPGA force'' command to upgrade fpd image. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-TRANSCEIVER_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: TRANSCEIVER entity is removed from the line card), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-FSDB_SERVICE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FSDB was not able to connect with the above error condition.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLC-6-MSG_GENERIC_ERROR
### Response:
(Severity: 6), (Category: OS), (Description: BCDL consumer dll hit some error condition.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_COMM_DRVR-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The SFE common infra driver was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the command to display OSPF virtual links in Cisco IOS XR?
### Response:
To display OSPF virtual links in Cisco IOS XR, use the command 'show ospf virtual-links'. This will display information about configured virtual links, including the transit area, the router ID of the virtual link neighbor, and the state of the virtual link.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-UNSUPP_SLICE_CFG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An invalid slice configuration for this cardtype/optics type is present), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMHAD-3-ERR_NOMEM
### Response:
(Severity: 3), (Category: OS), (Description: The Platform Manager HA Driver DLL was unable to add any new fault record due to lack of memory. This condition will cause the DLL to exit.), (Recommended Action: Add more memory to the card specified in the System Message. If the this message recurs after a memory upgrade, copy the System Message text exactly as it appears on the console or in the system log, and contact your Cisco technical support representative, and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is a debug message in the CGV6 SERVICE PROCESS to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: 'show logging' to confirm errors)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSP_B_PKT_CRC_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TSP decoder B CRC error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power less than or equal to the low Tx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-INIT_EVM_CREATE_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Event Manager creation failed while applying encapsulation config. This could be due to memory allocation failure or message channel creation failure.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_RETRAIN_LINK
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and cause retrain link.), (Recommended Action: An error that causes retrain link has happened and been handled Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-OUT_MEM_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an output memory error on link 4), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-SEU_CORR_ESSEN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Single event upset correction essential error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_L2VPN
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error communicating with the L2VPN server. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the L2VPN server, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-OUT_OF_COMPLIANCE
### Response:
(Severity: 3), (Category: LICENSE), (Description: One or more requested entitlements from the customer are out of compliance.), (Recommended Action: Customer needs to go to the smart licensing portal to view their entitlements to figure out why they are out of compliance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_PROV
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from PROV.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different IPC mechanisms available in Cisco IOS XR?
### Response:
Cisco IOS XR supports several IPC mechanisms suited for different use cases\n- Lightweight messaging (LWM): Synchronous, connection-oriented, intra/inter-node\n- Group services protocol (GSP): Asynchronous, connectionless, multicast-based\n- Bulk content downloader (BCDL): Uses GSP to efficiently download large data sets\n- Qnet protocol: Extends message-based IPC transparently across nodes\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-4-SID_OOR_GREEN
### Response:
(Severity: 4), (Category: ROUTING), (Description: The SRv6 SID manager database is no longer in a Out of Resource or Warning state. Normal SRv6 SID allocation operations have resumed. Details about the platform limit can be seen with <Bold>show segment-routing srv6 manager<NoBold> command.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_LIB-3-PROTECT_STATE
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred whilst notifying infrastructure that one or more ports are under STP control. If this occurs, these ports may not take the correct STP state, in the worst case leading to bridging loops forming in the network.), (Recommended Action: If new port configuration has been added, shut the newly configured ports down. Remove all MSTP configuration and reapply.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-TCAM_PREFIX_COMPRESS
### Response:
(Severity: 5), (Category: OS), (Description: IPv6 prefix compression failed because the line card has run out of internal resources for compressing a preifx. It shouldn't have any major impact on the system service. The in-bound (destined to the system) packets can still reach destinations through SW path.), (Recommended Action: Try either change the prefix length or change the prefix value of IPv6 addressses used in the system if possible.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_SYSDB_UNPACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-INIT_CONFIG_DONE_MISSING
### Response:
(Severity: 2), (Category: ROUTING), (Description: BGP needs init config done notification from BPM to start all BGP threads.), (Recommended Action: - show tech routing bgp - show logging - show process bgp location all - show process bpm location all - show process blocked location all - show aipc trace location all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPC_I2C-3-UNRECOVERABLE_BUS_HANG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The attempted I2C bus hang recovery was not successful.), (Recommended Action: Physically OIR the board which is having the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-1-MEMORY_MODULE_ALERT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: One or more the Memory Module in the card is not detected or having errors.), (Recommended Action: Please collect the following CLI command once the card's state changes to 'IOS XR RUN', and report the problem to your Cisco technical representative: <CmdBold>show tech vsm<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-RP_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_LONG_PKT_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress long packet detected on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_1_NPU_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-1 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MANSDORF-3-SQUID_DMA_REQ_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A critical condition occurred in MANSDORF layer. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed in squid_dma_req. This condition indicates a problem with the software when squid_dma_req returned critical error.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show logging show running-config show cli history detail loc <> sh plim services trace driver info sh plim services trace driver error </RP> <LC> </LC> <TECH> show tech-support location <> show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-1-MSG_CHAN_DISCONNECT_FAIL
### Response:
(Severity: 1), (Category: INFRA), (Description: Message channel disconnect failed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-DAO_PROGRAM_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RSP DAO FPGA program failure with latest FPGA version. FPGA is programmed with golden image version.), (Recommended Action: Reset the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-6-EDM_RESPONSE_TOO_BIG
### Response:
(Severity: 6), (Category: SYSDB), (Description: A Client is responding with a very huge data, it should split the response.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-6-TRANSCEIVER_INSERTED
### Response:
(Severity: 6), (Category: L2), (Description: This informational message indicates that the optic interface module was inserted on the given interface.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-SETSOCKOPT_INVAL
### Response:
(Severity: 6), (Category: IP), (Description: An error occurred whilst trying to setsockopt on the socket. Session will continue.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-NON_ZERO_Q0_COUNTER
### Response:
(Severity: 3), (Category: L2), (Description: Egressq driver detected that packets are sent to Q0, which is invalid queue.), (Recommended Action: If this message appears more than once in short period, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-2-RX_UNKNOWN
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM PLA ASIC had an unkown fault on the given interface which will result in a link flap.), (Recommended Action: Suggest running diags to determine which part of the Rx path is broken and potentially RMA to replace the bad hardware.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-BADFORMAT
### Response:
(Severity: 4), (Category: MGBL), (Description: The command entered is badly formatted.), (Recommended Action: Re-enter the command. (Use the help command to find valid entry formats.) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-LOSS_OF_SYNC_FIA11
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on interlaken interface on egress mux and fia 1), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_GET_JOB_ID
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed on a call to system manager to get its job_id. It's an internal software fatal error. IS-IS process will abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PROCESS_EXIT
### Response:
(Severity: 6), (Category: INFRA), (Description: ESD process is exiting. This may be due to a normal event or due to a fatal error.), (Recommended Action: Determine if the exit was due to a fault. If so, the root cause of the switch going offline needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-5-ZAPDISK_STARTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-CLIENT_REGISTRATION_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver client registration has failed due to abov error condition.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-CLIENT_EVENT_SEND_ASYNC_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: The ISSU Library was unable to send an event to the Event Manager specified by the client, and thus was unavailable to communicate with ISSU Manager.), (Recommended Action: If the client is essential to the ISSU operation, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Otherwise retry the operation and / or proceed with the ISSU. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the set-overload-bit command in IS-IS?
### Response:
The set-overload-bit command is used to set the overload bit in the LSPs that the router generates. When the overload bit is set, other routers will not use this router as a transit router. This is useful when you want to gracefully remove a router from the network for maintenance without causing routing loops.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_ASYNC_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPU async FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the Routing Policy Language (RPL) in IOS XR and why is it used for BGP policies?
### Response:
RPL is a structured language for defining routing policies in IOS XR. It provides a rich set of constructs for matching attributes of BGP routes and taking actions such as allowing/denying routes, modifying route attributes, and so on. RPL policies are defined separately from BGP configuration and attached to BGP neighbors, allowing reuse of policies.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVQ_ENQUEUE
### Response:
(Severity: 4), (Category: L2), (Description: This is an unexpected error. The PPP MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-COMMUNICATION_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate communication failure. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-ECM_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failed to create and initialize event manager structures due to * SPA being in FAILED state * Problem with SIP * SIP/SPA communication failed), (Recommended Action: - Try reloading spa if still in failed state then reseat it. - Try to move the spa to another slot and check for spa bringup. If the spa comes up then the problem is with SIP. In this case replacing SIP will help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-ISSU_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Fatal error in one of the ISSU apis.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SATORI-3-LTRACE_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace initialization failed. This may be a program level error.), (Recommended Action: Try to respawn the process, if this error occurs again contact support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_MIN_PKT_LENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The length (PKTLEN) of the PDUTYPE received from the interface SOURCE is smaller than the minimum (MINLEN) This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-EVENT_TIMEOUT
### Response:
(Severity: 3), (Category: SYSDB), (Description: A client failed to pick up a sysdb event before timeout), (Recommended Action: Check status of the client process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_STAT_VEC_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 state error on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-LOC_INFO
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The info about the top netio DLL addresses using the specified resource.), (Recommended Action: It is an informational message along with packet depletion log message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-6-ENFORCE_DISABLED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing is disabled.), (Recommended Action: The customer should install license on router before enabling licensed feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-CHKPT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Checkpoint infra related errors in autorp_mapping_agent), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-3-IBS_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt fpga detects ingress module errors), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-3-MEDIA_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: ARP failed to load and initialize a dynamic library that it requires.), (Recommended Action: Restart the ARP process. If this does not resolve the problem then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_LIB-7-ERR_LTRACE_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID library failed to initialize ltrace. The FGID component and the system should still function as normal, with the exception that the ltrace will not be available for FGID library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_ABORTING_ON_ERROR
### Response:
(Severity: 6), (Category: INSTALL), (Description: An error occurred in the ISSU install operation, and the operation will be aborted using the stated method to recover the system back to it's running state.), (Recommended Action: Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_PIFIB-5-ERR_NON_EXISTS_ACL
### Response:
(Severity: 5), (Category: PLATFORM), (Description: acl string is non-effective. Acl string provided is not mapped to any access-list mentioned for configured protocol type, so its not effective.), (Recommended Action: When this issue happens, first try to create the acl string match with ipv4 or ipv6 access list and then map it to the LPTS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACLMIB-3-INIT_ERROR
### Response:
(Severity: 3), (Category: ACL), (Description: The ACL MIB library initialization has failed. The ACL Statistics MIB functionality will be unavailable), (Recommended Action: Check the error string and collect required information listed below.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you check the installation log in Cisco IOS XR?
### Response:
The installation log in Cisco IOS XR can be checked using the 'show install log' command, which displays the history of install operations performed on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_SERDES-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message provides information about the kind of events happening in the Serdes software. This is not an error message. Typically, following events are logged in this message type. - End of successfull initialization of the software. - Start and end of a processing of new object that needs to programmed to the hardware.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-6-DEADCACHE
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: An LNS peer is added to or remove from dead cache), (Recommended Action: Verify peer's IP reachability or confirm tunnel password configured on both sides match)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-MACSEC_PPK
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFO_EA_PD_STUB-7-INTF_UPDATE_CALLED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_7_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-ERR_DLL_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl driver tried to register for a dll but it encountered an error. The driver might lose some of its functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA_SHARED-4-ERR_DLL_REG
### Response:
(Severity: 4), (Category: ROUTING), (Description: The given cerrno dll could not be marked for use. This does not change the functionality of the system but does obscure the meaning of error codes presented by this part of the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
netio_debug-4-EVENT_BLOCK
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The NetIO debugging partner process failed to wait for events to be delivered.), (Recommended Action: NetIO debugging partner process is only needed to capture/log packet info and for debugging purpose only and does not effect system functionality. No actions are needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-7-WARM_RLD_FO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Card seems warm reloaded successfully), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_DATA
### Response:
(Severity: 6), (Category: INSTALL), (Description: This message is seen during ISSU after switchover or instdir process restart> The ISSUMgr is registering with checkpoint and found existing data. This is expected in the RUN phase of ISSU operation where a switchover happens or when instdir process restarts in any phase of ISSU and is not an error condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The FM encountered a problem of a generic nature or an informational message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-CLIENT_LOCK_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error was encountered while trying to perform an operation on a lock. The process will continue without retrying the operation. In most cases, no further adverse behaviour should be observed.), (Recommended Action: If the same message is seen repeatedly for a process, restarting the process may fix the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-TIMER_PARENT_CHANGE
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an error in IOS-XR managed timer library API. *SUPPORT*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TIMER_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: Unable to create leaf for node timer tree.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is Virtual Private Wire Service (VPWS) and how is it configured in Cisco IOS XR?
### Response:
VPWS is a point-to-point L2VPN service that provides Ethernet-based Layer 2 connectivity between two customer sites. It is configured using the 'l2vpn' configuration mode. The 'xconnect group' command is used to define a VPWS instance and the 'p2p' command is used to specify the endpoints of the VPWS service. The 'neighbor' command is used to specify the remote PE router and the 'pw-class' command is used to specify the pseudowire attributes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-4-DISK_INSTALL_WARN
### Response:
(Severity: 4), (Category: INFRA), (Description: Installation affected warning when rootfs usage is above MINOR Threshold Percentage), (Recommended Action: The indicated disk device may be running out of space for installation. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-TRAP_DELAY_TIMER
### Response:
(Severity: 3), (Category: SNMP), (Description: SNMP traps for the host were queued for configured trap delay time. As ping did not succeed in stipulated amount of time, all queued traps for this host will be dropped.), (Recommended Action: Verify why host was unreachable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UTIL_RETRY_HANDLER-6-EXTENDED_RETRY_PERIOD
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: A retry has been going on in the background for an extended period of time. This may be due to a misconfiguration or may be an indication of other unexpected behavior.), (Recommended Action: If current system behavior is working as expected, then No action is required.. If the current system behavior is unexpected, then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR node protection desired feature?
### Response:
The MPLS TE FRR node protection desired feature allows a TE tunnel to be configured for node protection, but if node protection is not possible, link protection is attempted instead. This provides a best-effort approach to protecting traffic, preferring node protection but using link protection as a fallback. It increases the chances of successful FRR protection.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-7-PM_REPORT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Error in raising alarm to Fault Manager. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-INIT_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv6 IO failed to initialise some services.), (Recommended Action: This usually happens at startup. The process would usually restart and recover. If the problem continues, restarting ipv6_io may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-CLIENT_UNBIND_IGNORED
### Response:
(Severity: 4), (Category: INSTALL), (Description: Unbinding a client during an ISSU is an invalid operation. The ISSU infrastructure will best effort remove all data detailing the clients registrations when the ISSU has completed), (Recommended Action: If the client is essential (e.g. it participates in the Load Phase or Run Phase) to the ISSU operation, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Otherwise retry the operation and / or proceed with the ISSU. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-3-INIT_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: Object Tracking failed to initialize its services.), (Recommended Action: The system will try to recover from this error. If self recovery does not occour collect the following logs to report show tech sysdb show run track show log 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-RSRC_OK
### Response:
(Severity: 6), (Category: ROUTING), (Description: The FIB process had previously detected that the hardware,software resources required for operation were running low, and had enterred resource constrained forwarding. Now resources have been restored and FIB has resumed normal operation.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE-3-ERR_SHMEM_OPEN_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to open the shared memory fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_EA-3-INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the SBCSVI EA process on a particular node. The process will be restarted. Until the process starts successfully, any SBCSVI interface located on that node will not come up. (If there is a standby node the interfaces should come up on the standby).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-5-TIMEOUT
### Response:
(Severity: 5), (Category: HA), (Description: A timeout occurred waiting to hear from an event manager. This could happen as a result of a process being deadlocked on another event.), (Recommended Action: Wdsysmon has detected that an event manager is no longer sending keepalive heartbeats. The message provides information about where the event manager was created. A debug script will run and collect information about the process and the state of the router. The output will be in a directory [/disk1:|/disk0:|/bootflash:|/tmp]/wdsysmon_debug/debug.*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCAM_MGR-6-V6_ANCHOR_PREFIX
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The IPv6 compression anchor prefixes are changed. The linecard needs to be reloaded to make the changes effective. This is not an error message or condition.), (Recommended Action: The IPv6 compression anchor prefixes are changed. The linecard needs to be reloaded to make the changes effective. This is not an error message or condition. 'hw-module location <> reload <path>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_OPTICS_SW_IMAGE_CORRUPTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_INTERNAL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered an internal software error. (e.g., timer service error or system call errors) This software error will cause process termination to recover. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. *RECUR*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_COFO_LB-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-GR_NBR_ABORT
### Response:
(Severity: 5), (Category: ROUTING), (Description: GR is being aborted on an LDP GR session under recovery. This means that current GR [recovery] is aborted and any pending GR state is cleaned up. The next time session connects as new GR session. The reason for aborting GR on the session helps in finding the trigger for this abort. This message appears only if the <Bold>mpls ldp log graceful-restart <NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-AGENT_ENABLED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Agent is enabled and ready for use.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_3_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_PW-6-STANDBY
### Response:
(Severity: 6), (Category: L2), (Description: L2VPN Pseudowire state is changed to standby.), (Recommended Action: If the state change was unexpected, verify the configuration settings for the cross-connect.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LDA_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a parity error for this device (FPGA/CPLD/ASIC)), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-PERSISTENT_CRC_LINK_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl manager could not bring up the ASIC link on the specified port. This indicates a hardware failure on the MSC or PLIM board.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-IMPSERVER
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an error has occurred in IMP Server. Particular failure reason is included in the message. This error happens when IP Tunnel Execution Agent tries to connect to IMP server.), (Recommended Action: Please try restarting IP Tunnel Execution Agent process with the command <CmdBold>process restart ip_tunnel_ea location <node id><NoCmdBold> If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_ASIC_FCRAM_ASSERT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabricq ASIC encountered a FCRAM Channel error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_10_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-3-BLOCK_OOR_STATE_RED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The SRv6 SID manager database has exceeded the blocks resource limit for dynamically allocated local SIDs. Details about the limit can be seen with <Bold>show segment-routing srv6 manager<NoBold> command. Details about the block can be seen with <Bold>show segment-routing srv6 block<NoBold>. The list of local SIDs can be seen in <Bold>show segment-routing srv6 micro-segment local-sid<NoBold>), (Recommended Action: Reduce scale of Segment Routing IPv6 entries by changing topology or VPN allocation mode in BGP from Per CE to Per VRF)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-6-IMA_KERNEL_DRAIN_SUCCESS
### Response:
(Severity: 6), (Category: MGBL), (Description: Kernel IMA data was freed after adding into disk cache.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-PI_PLANE_TIMER_FIRED
### Response:
(Severity: 3), (Category: OS), (Description: PI Plane timer fired. Premature declaration of PI.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error encountered while creating the shared memory or accessing the shared memory.), (Recommended Action: collect 'show service-ec trace location<ISM location>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_STAT_VEC_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 state error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP graceful restart?
### Response:
To configure LDP graceful restart, use the 'graceful-restart' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#graceful-restart
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can BGP prefixes be originated through redistribution?
### Response:
Routes from an IGP or static routes can be redistributed into BGP using the redistribute command under the BGP process. By default, they are assigned an origin of incomplete (?).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-NULL_REQ
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-SYS_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath encountered an initialization error This error could occour for two reasons. 1. The system is low on resources. 2. A hardware or software error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-ERR_PROC_RESET
### Response:
(Severity: 3), (Category: DIAG), (Description: Failed to reset process as part of diagnostic software self recovey in case of ce switch loopback test failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-LACP_PKT_DROPPED_PTNR
### Response:
(Severity: 5), (Category: L2), (Description: There has been a jump in the actor sequence numbers received by the partner, indicating that a LACPDU from this device to the partner has been dropped. This condition has been signalled from the partner to this device. Note that rate limiting on transmission takes place before the sequence numbers are incremented, so the warning will not be related to rate limiting on transmission. However, it is possible that rate limiting on receipt will cause a sequence number discrepancy.), (Recommended Action: This message indicates that a gap in incoming LACPDUs has been detected by the partner device, possibly as the result of packet loss or rate limiting of incoming LACPDUs. Check packet counters on both devices for drops, and for rate limited incoming LACPDUs on the partner device using <CmdBold>show lacp counters<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-MISSING_AUTH
### Response:
(Severity: 3), (Category: IP), (Description: The local application did not program the authentication information (MD5 or key chain) for the peer with which it is trying to connect. It is likely that the application programmed the information for a different peer on the socket opened for connection to the specified peer.), (Recommended Action: Identify the application that owns the affected socket and try to examine its traces and debugs. If the problem persists, collect the output of show commands, traces and running coredumps of the application as well as TCP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-THREAD_CTX_INIT
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to initialize the WDSysMon resource notification thread context), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-DATAARRAYTYPE
### Response:
(Severity: 4), (Category: MGBL), (Description: The datatypes entered in a data array do not match the the expected datatypes.), (Recommended Action: Use the classinfo command to get more information about the naming or value information of a class. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some basic functions an operating system must provide to support networking?
### Response:
A network operating system must provide process scheduling, interrupt handling, memory management and protection, inter-process communication (IPC), synchronization services, and common shared libraries. It needs preemptive multitasking and multithreading with memory protection for processes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-BNM_LOSS_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while restarting the loss threshold timer for the BNM Enabled Link specified in the error message. This means CFM may not detect if the remote device stops sending BNMs, or CFM may report incorrectly that the remote device has stopped sending BNMs. This may cause CFM to report incorrect bandwidth information for this BNM Enabled Link.), (Recommended Action: If the error persists, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NACMD-7-DEBUG_ERROR
### Response:
(Severity: 7), (Category: SECURITY), (Description: Error encountered in debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-INIT_IFMGR_CONN_OPEN_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Process failed to connect to Interface Manager while applying encapsulation config. This could be due to invalid connection context for which there is no current handling, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-OOM_STATE_UNTHROTTLE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: No action is required. This indicates that the memory is back to normal.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-INTF_FWS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospfv3_uv process was unable to initialize the forward-reference store library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-PACKET_CAPTURE_REACTIVATE_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: An error occured when XLNCd tried to re-activate a previously- active packet capture session when it, or one of its dependent processes, restarted. A packet capture session is created when running Linux tools such as tcpdump and directing them to use libpcap_xr.so rather than the standard Linux libpcap.so. It is likely that no further packets will be captured.), (Recommended Action: Try stopping and re-starting the affected Linux tools.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_CHANGE_NOT_PERSISTENT
### Response:
(Severity: 4), (Category: SECURITY), (Description: SAM found there is nowhere to backup the modified SAM table.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-PACKET_LOCK_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered while trying to perform an operation on a lock. The thread will continue without retrying the operation. In most cases, no further adverse behaviour should be observed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_PM_FAN_AIRFLOW_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when power modules present on the satellite have different fan types (suction or exhaust).), (Recommended Action: Please use power modules which have fans of same airflow type i.e. either sucntion or exhaust.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_CFG_CHANGED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with line card reload.), (Recommended Action: System LC is inconsistent. Need to reload the line card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-BIA_CALL_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The driver was unable to allocate a default (burnt-in) MAC address on the given interface. The interface will be unusable until an explicit MAC address has been configured.), (Recommended Action: This error message indicates an internal problem, from which the driver is unable to recover. Please contact your support representative for assistance and guidance on what diagnostics information should be gathered. In the meantime it is possible to work around this issue by configuring an explicit MAC address on the interface, which should allow the interface to function normally.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SEQNUM_WRAP
### Response:
(Severity: 4), (Category: ROUTING), (Description: An LSP originated by this system has had its sequence number wrap around to 0. The IS-IS specification states that this system should shutdown for 20 minutes waiting for the LSP to age out before resuming routing.), (Recommended Action: This condition can only occur if a network has been operational for several years, or if a network has been misconfigured for a long time. Disable the IS-IS routing process for max-lsp-lifetime and then restart it to clear the problem. Alternative approaches include changing the SYSTEM-ID or, if this occurred with a pseudo-node LSP, lowering the priority of the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-UNSUPPORTED_XFP
### Response:
(Severity: 6), (Category: L2), (Description: The XFP inserted in the given port is not supported on this PLIM.), (Recommended Action: Verify the XFP is supported in the CRS-1 installation manuals. Replace this XFP with a Cisco supported XFP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-FALLBACK_CHOICE_BOOT_DEV
### Response:
(Severity: 6), (Category: OS), (Description: The fallback choice is on the boot device for either the local node or the remote node. This device would be skipped as dump device choice to prevent dumper filling it up with core dumps.), (Recommended Action: Please configure primary, secondary or tertiary exception path.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-CREATE_REGISTER_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 MA registers to be notified of Forwarder interface creation if its not already available when IPv4 MA starts. The process tries to recover by reconnecting to IM. If the error persists, the forwarder will not be available for IPv4 packets.), (Recommended Action: Collect the output of show tech-support, show ipv4 ma trace, debug ipv4 ma error, debug im errors, debug im api calls job <>, debug im api errors job <> from the location the error message comes from.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-BOUNDARY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-RECYCLE_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current recycle-service-over-rsvpte profile and newly configured recycle-service-over-rsvpte profile. Needs attention with LC reload.), (Recommended Action: System LC is inconsistent. Need to reload the LC in order to activate the new recycle-service-over-rsvpte profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Qnet protocol in IOS XR?
### Response:
Qnet is a protocol that enables transparent inter-node communication for IPC mechanisms like LWM. It allows processes to communicate over the control network without being aware of node boundaries. Qnet provides location transparency using a virtual bus abstraction and hides the details of marshaling messages between nodes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-LTRACE_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error occurred when trying to create a buffer for tracing.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_UNF_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 Tx underflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-EVM_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to set up event connection. When this issue happens, it will trigger an automatic restart of the pifibm_server_lc process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-5-KDUMP_FILE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-2-XGXS_TX_SYNC
### Response:
(Severity: 2), (Category: L2), (Description: The XGXS Tx Lanes failed to synchronize after a Xenpak OIR or Link Flap.), (Recommended Action: Try to shut/no shut the port. If the MAC does not get enabled, then A physical OIR of the Xenpak device will be needed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKGFS-3-FILE_WRITE
### Response:
(Severity: 3), (Category: INSTALL), (Description: 'The node boot-up failed while writing pkgfs map to file.' 'The node will reload and try to recover.'), (Recommended Action: 'The node will restart automatically and try to boot-up.' 'If the node doesn't recover after reload contact TAC with 'show tech install'' 'and console logs.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-STATE_MSG_DELAY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The system has detected a possible performance issue causing a delay in shelf management operations.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the TCP process try to request more memory. The requested operation by tcp could not be accomplished because of a low memory condition.), (Recommended Action: In the problem recurs, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PA-2-CTX_CREATE
### Response:
(Severity: 2), (Category: OS), (Description: PA Can't create VFR context structures.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the BGP route refresh capability?
### Response:
The BGP route refresh capability allows a router to dynamically request a re-advertisement of routes from a neighbor. This eliminates the need to store received routes as with soft reconfiguration. It is enabled by default if both neighbors support it. Otherwise, it can be enabled with the neighbor send-community command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_ECN_MODE_CHANGE
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If enabling or disabling ecn configuration, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with line card reload.), (Recommended Action: System LC is inconsistent. Need to reload the line card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlma-4-EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN MA process encountered an error while listening for events. The process will automatically restart and retry.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9KPAGENT-7-OPERATION_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CHKSUM_ERR_1_FIA_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checksum error - 1 from FIA on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-SERDES_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected a serdes error on link 2.), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-REIMAGE_COMPLETE
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP has exited since router will be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-ACCT_NOTIFY_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-LINK_SHUT_DOWN_PERM
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabric driver encountered an error beyond the threshold times on the annunciated Fabric Switching Element link and the link is shutdown permenently by the driver .), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-CONNECT_CHANNEL_FAIL
### Response:
(Severity: 3), (Category: L3), (Description: A failure has occured in communication between the IPv6 Neighbor Discovery (ND) process (ipv6_nd) and the ND spoofing process (ipv6nd_lite). This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart.), (Recommended Action: Check that the ipv6nd_lite process is running and restart it if necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_SYSMGR_MON_LIB-3-SYSMGR_HB_LOSS
### Response:
(Severity: 3), (Category: HA), (Description: Sysmgr failed to acknowledge for Heartbeat.), (Recommended Action: This indicates an sysmgr process is hung or unable to communicate with watchdog.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-6-DRIVER_INFO_MSG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message gave a informative message. This is not a failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_TIMER_ASYNC_CODE
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700_DLL-0-INIT_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The CPU Control, Dynamic Link Library (DLL) failed to initialize. The effect is that the line card may not function or may not function appropriately. The CPU Control DLL provides low level services to other components on the SIP 700 Line Card (LC). These include, among other things, interrupt services and watch dog time out services. If CPU Control services are not available then those mandatory processes that use these services will exit, respawn and retry the initialization. If these services remain unavailable then the LC will not properly boot and will reset itself. This error is generally indicative of a larger LC-wide problem. %s - description of the specific failure encountered %s - error detail, if appropriate), (Recommended Action: This error is unlikely to occur by itself nor is it likely to be the root cause of the problem. Please copy the contents of the system log or as much of the contents of the system log as is possible from around the time that the problem occured, gather output from the 'show tech-support' command, call your Cisco technical support representative and provide the gathered information to the representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DYNNIC-2-INIT_FAILED
### Response:
(Severity: 2), (Category: L2), (Description: The SPP node dynamic-nic has failed to initialize properly.), (Recommended Action: If any problems are seen, they may be rectified by restarting the spp process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-6-OPERATION_REQUEST
### Response:
(Severity: 6), (Category: OS), (Description: SSD encryption process received a request to activate/deactivate encryption. This is usually the response to user or some script executing 'disk-encryption <operation>' command. This log just informs that the prepare phase for the operation is starting.), (Recommended Action: No action to take. An ios message indicating success/failure result of this operation should follow. In case of success, the router/node will proceed to reload within a few seconds. In case of failure, system will wait for user intevention to determine cause of failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different levels of the MPLS VPN CSC feature?
### Response:
The different levels of the MPLS VPN CSC feature are\n- CSC-1: Customer carrier uses IP to transport MPLS VPN services\n- CSC-2: Customer carrier uses MPLS to transport MPLS VPN services, but does not use labels (IP+BGP)\n- CSC-3: Customer carrier uses MPLS to transport MPLS VPN services, and uses labels (MPLS+LDP)\n- CSC-4: Customer carrier uses MPLS to transport MPLS VPN services, and uses labels with BGP label distribution (MPLS+BGP labels)\n- CSC-5: Customer carrier uses MPLS VPN to transport MPLS VPN services (MPLS VPN+LDP+BGP labels)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-3-LTRACE_INIT_FAIL
### Response:
(Severity: 3), (Category: INSTALL), (Description: 'Failed initialising the tracing library.' 'Traces for instdir process will not function properly.'), (Recommended Action: 'Traces will not function properly. It is safer to ' 'recover by restarting 'instdir' process;instead of ' 'ignoring this error. Restoring the traces helps in ' 'debugging any future issues. ' 'For restarting; from exec mode - 'process restart instdir'' 'If restarting the process doesn't resolve this error,' 'contact TAC.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-TE_GID_EXISTS
### Response:
(Severity: 2), (Category: ROUTING), (Description: A tunnel label object was created with an existing gid value.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-5-LSP_GROUP_CHG
### Response:
(Severity: 5), (Category: MGBL), (Description: LSP Group status has changed for the operation. This is a result of some/all of the ECMPs monitored by the operation changing their status to Up or Down. Refer to the Textual Convention RttMplsVpnMonLpdGrpStatus at the CISCO-RTTMON-MIB for possible reported status values.), (Recommended Action: When status of the group changes to 'Down' or 'Partial', check the output of 'show ipsla statistics <group_id>' and look for those reported paths with 'Path Sense' value different from 1. Run 'traceroute mpls' for the failed paths to collect more information about the failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ACTION_FAILURE_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to program TX Adj. This condition indicates a problem with the software while programming TX Adj. - Failed to program RX Adj. This condition indicates a problem with the software while programming RX Adj.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-MISSING_ACCESS_TECH_TYPE_OPTION
### Response:
(Severity: 3), (Category: IP), (Description: Access Technology Type option is missing in the PBU.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-CRYPTO_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Artifact signature verification or decryption failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCCLIB-3-ERR_HW_BIST_TIMEDOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BIST failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_ECM_NOTIFY
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB encountered an error while attempting to install an ECM notification handler for the specified path. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_RRW_LOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to aquire rrw lock to the request record area in shared memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-VIRT_INST_MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service requires physical memory in excess of the free memory available to virtual services.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_INVALID_MSG
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encountered invalid LWM message received .), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_QS_DONE
### Response:
(Severity: 1), (Category: INSTALL), (Description: The entire Quickstart operation has completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR0_INTR_ACCPT_TBL_DROP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR0_INTR_ACCPT_TBL_DROP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-CLIENT_CONFLICT
### Response:
(Severity: 4), (Category: INSTALL), (Description: Reconnecting a client with different registration information to that already held by ISSU Manager while an ISSU is in progress is an invalid operation. The client will be unable to reconnect, which may cause the ISSU operation to fail if ISSU Manager was expecting the client to participate.), (Recommended Action: If the client is essential to the ISSU operation, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Otherwise retry the operation and / or proceed with the ISSU. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_TP_NETIO-5-DEBUG_CLEANUP_FAIL
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: Teleport Netio DLL failed to cleanup the registration with the debugging subsystem. This may result in error when fwd DLL is re-registering with the debug system. If such an error is not noticed, no further action is needed.), (Recommended Action: If error is observed during reregistration, this error message could be a clue about the reregistration failing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-6-RESET_ALL_ASICS
### Response:
(Severity: 6), (Category: FABRIC), (Description: Process a request received from FSDB to reset all the ASICs on the fabric card.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_L2FIB-2-MACTABLE_BASE_ADDRESS_UPDATE_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Failed to update the mac-table base address.), (Recommended Action: Please unconfigure and reconfigure L2VPN to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-7-INIT_FAILED
### Response:
(Severity: 7), (Category: IP), (Description: Initialization of the IPv4 ARM or IPv6 ARM process failed. This can happen when the process is (re)starting and any basic infrastructure service required by the process is not available. The process recovers by restarting itself. If the error message doesn't persist, it can be ignored. If the error message persists, depending on whether IPv4 ARM or IPv6 ARM failed to initialize, some basic ipv4 or ipv6 functionality may not be available.), (Recommended Action: Collect the output of show tech-support, show processes, show arm [ipv4/ipv6] trace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS explicit null label?
### Response:
The MPLS explicit null label is a special label with value 0. It can be used to signal to the penultimate hop router to perform penultimate hop popping (PHP) and forward the packet to the egress router without an MPLS header. It is advertised using the explicit-null command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-FILE_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: Failed to open/close an OBFL file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-CPU_HOG_1
### Response:
(Severity: 6), (Category: HA), (Description: Wdsysmon has detected a cpu starvation situation - potentially a high priority process spinning in a tight loop. The sched count is the number of times the wdsysmon ticker thread has been scheduled since the last time the wdsysmon watcher thread ran.), (Recommended Action: Check the system status, including the saved log for evidence of a high priority cpu hog.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the implications of a microkernel architecture on modularity and resilience?
### Response:
A microkernel architecture with fast context-switching enables a high degree of modularity. Each application and service can run as its own process in a protected memory space. A failure in one process does not impact others. Processes can be restarted independently without reloading the entire system, providing resilience.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-1-UPGRADE_FAILED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The given FPD upgrade failed for the given reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-2-ASIC_ERROR_CIH_SBE_INTR_DISABLED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Correctable errors occurred beyond threshold), (Recommended Action: ASIC errors that are correctable have exceeded the threshold. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-BRINGDOWN_REQUEST_LIB
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The reason should be supplied in the IOS msg itself, but basically this msg means that shelfmgr is shutting down a node because a process specifically requested it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV4PROTO-7-PLIB_INIT
### Response:
(Severity: 7), (Category: IP), (Description: There was a problem initializing the IPv4 protocol library within a transport process. The message indicates what part of the initialization failed.), (Recommended Action: Transport processes might restart due to this initialization failure. If this error message is seen just once when multiple processes restart, then it can be considered transient and ignored. If the message is seen multiple times and the transport has restarted too many times, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APP_OBJ-7-ERR
### Response:
(Severity: 7), (Category: MGBL), (Description: This is an error message in the Netflow manager to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate a resource needed by the application. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: These error message is does not impact the functionality of NetFlow. Therefore no action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 2), (Category: ROUTING), (Description: 'An error occurred in the event loop. In most of the cases'' 'it will recover.' *RECUR*), (Recommended Action: Please provide output from the following commands: - show tech routing bgp - show dll - show running-config - show configuration failed - show configuration history 5 - show commit changes <last 5>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does local archiving of logging messages work in Cisco IOS XR?
### Response:
Local archiving of logging messages in Cisco IOS XR allows storing log messages on the router's local storage, such as the hard disk or flash memory. This enables local access to historical log data for troubleshooting and analysis.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-EVENT_MGR_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: An error occurred during sysdb health check. Not able to create event manager.), (Recommended Action: In most cases, this would be transient error. However, if this happens repeatedly, please collect 'show tech sysdb' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-RSVP_AUTH_NO_KEYS
### Response:
(Severity: 5), (Category: ROUTING), (Description: The router is unable to authenticate outgoing RSVP messages due to a lack of availaible keys.), (Recommended Action: Check the router configuration of the specified key source.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a VRF?
### Response:
To configure a VRF (Virtual Routing and Forwarding) instance, use the 'vrf' command in global configuration mode. RP/0/RP0/CPU0:router(config)#vrf Customer_A
RP/0/RP0/CPU0:router(config-vrf)#address-family ipv4 unicast
RP/0/RP0/CPU0:router(config-vrf-af)#exit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-SVC_FILE_OPERATION_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information. %s - indicates the type of file operations (e.g. open, close) %s - is the file name in question.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-DSC_MIGRATED
### Response:
(Severity: 4), (Category: INSTALL), (Description: An unexpected dSC migration has happened. The install manager detects this condition and also finds it may continue.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp client-to-client reflection' command in IOS XR BGP configuration?
### Response:
The 'bgp client-to-client reflection' command is used to enable route reflection between clients in a BGP route reflector setup. By default, a route reflector does not reflect routes between clients. It only reflects routes between a client and a non-client. This command enables the reflection of routes between clients, which is necessary in certain topologies to ensure full connectivity between all iBGP speakers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-DELVLINK
### Response:
(Severity: 3), (Category: ROUTING), (Description: The virtual link cannot be removed because OSPFv3 is in the process of deleting the backbone area. Try again later.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-4-TACACS_NOSERV
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-FILESAVE_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: There was an internal error encountered while attempting to save a file during the user interactive commit operation.), (Recommended Action: Retry the commit operation and if it gives the same error, copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-MEMORY
### Response:
(Severity: 7), (Category: LIBRARY), (Description: The replicator has failed to acquire the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-INVALID_PARAMETER
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The card information will be provided with message itself, but basically this message mean card information passed to command is invalid type. Please check for Rack/Slot/Node id before executing the command.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-WARM_RESET_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an error message in the NP Driver to indicate that it failed to perform warm reset of specified NP instance due to the specified reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-JOIN_IN_SSM_RANGE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace ssm-map error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace ssm-map error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-ERR_THREAD_MUTEX_UNLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to pthread_mutex_unlock() was unsuccessful'), (Recommended Action: Collect the following logs and contact your technical support representative for assistance. a) Console messages b) show tech-support parser c) follow process nvgen_server d) show proces blocked e) follow process <Name of process on which nvgen is blocked>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-INFO_STARTUP_FORCED_COLD
### Response:
(Severity: 6), (Category: ROUTING), (Description: The startup state-machine has determined that a cold (re)start must be performed regardless of current NSF configuration for the reason specified.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_OPTICS_FAILURE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PHYS_COMMON-6-AINS_TIMER_CONFIGURED
### Response:
(Severity: 6), (Category: L1), (Description: The notification Indicating Successful Start of Automatic In-Service Soak Timer), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-RECORD_TOO_LONG
### Response:
(Severity: 7), (Category: OS), (Description: A feature record is too long.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-EVENT_CONN_OPEN_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed to open an event connection. OBFL manager will restart.), (Recommended Action: If the issue is seen after restart then, collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-6-NOT_SUPPORTED_CARD_TYPE_RSP3
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This command is not supported on RSP440 card.), (Recommended Action: 'Please use show nv edge control switch-ports-status brief location <node>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-5-OIRIN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Detected a card is inserted into the chassis.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-GOT_EPOLLHUP
### Response:
(Severity: 4), (Category: INFRA), (Description: EPOLLHUP indicates that the other end of a socket or pipe hung up. The sockets and pipes monitored by epoll should never be closed and so this may indicate a system resource issue.), (Recommended Action: The process will restart. If the problem persists, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-IMDR
### Response:
(Severity: 3), (Category: L2), (Description: Error encountered during iMDR SIP upgrade), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Reload the line Card using <CmdBold>hw-module location <>/<>/CPU0 reload<NoCmdBold> jacket process will restart itself.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-2-HFR_FIB_OOR_ROUTES_BLOCKED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: CEF on the node has detected that the number of routes has exceeded prescribed limits and route updates to the hardware have been blocked.), (Recommended Action: Take immediate action to delete routes from the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OAMMIB-3-NO_TRAP
### Response:
(Severity: 3), (Category: L2), (Description: In the initialization of the OAM MIB DLL an error occurred while trying to register a callback function for the enabling of SNMP traps. Alternatively whilst trying to enable traps there was a failure in binding to SysDB for trap notifications.), (Recommended Action: Continue working with the OAM MIB DLL without any the ability to send traps when events occur or restart the DLL such that there is another attempt to register for traps.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-BACKUP_NOT_READY_REASON
### Response:
(Severity: 4), (Category: HA), (Description: The named process has set the backup process group in a not ready state with the supplied reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_CARD_SES_THRESHOLD_EXCEED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on the card has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-MC_HI_MBE_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast high priority fifo multi-bit ECC error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-INVALID_SIZE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error indicates the entered buffer size is not valid.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>), show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN carrier supporting carrier feature?
### Response:
The MPLS VPN carrier supporting carrier (CSC) feature enables one MPLS VPN service provider to allow other service providers to use a segment of its backbone network. The service provider that provides the segment of the backbone network to the other provider is called the backbone carrier. The service provider that uses the segment of the backbone network is called the customer carrier.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Encounter problem during process initialization. '%s' contains the explanation of the problem. %s - error description %d - error code %s - error code description), (Recommended Action: Restart the fabio_svr process. Contact TAC if problem still exist)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-INIT_FAILED_MA
### Response:
(Severity: 3), (Category: ROUTING), (Description: autorp_mapping_agent failed to initialize successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_map_agent detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_map_agent detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-MCLAG_CONFIG_CONFLICT_CLEAR
### Response:
(Severity: 4), (Category: L2), (Description: A configuration conflict has been cleared: Interface %s can be used by ' 'MCLAG feature.), (Recommended Action: Verify that MCLAG for the interface is working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-SYSTEM_ERR
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: IM was unable to perform a system operation that it expects to succeed. IM may exit and restart in an effort to help clear the condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-6-IM_FAIL
### Response:
(Severity: 6), (Category: IP), (Description: Failure encountered while updating Interface informations.), (Recommended Action: Restarting IM may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-TEST_RUNNING
### Response:
(Severity: 6), (Category: DIAG), (Description: Diagnostic testing is running a test on the card), (Recommended Action: Nothing. This is an informational message and the system should be working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-6-GRUB_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Grub running on the indicated card is sending a info message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-5-USER_PASSWD_UNLOCKED
### Response:
(Severity: 5), (Category: SECURITY), (Description: The user is unlocked for authentications.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge domain to drop unknown unicast?
### Response:
To configure an L2VPN bridge domain to drop unknown unicast traffic, use the 'unknown-unicast drop' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
unknown-unicast drop
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-3-IMDR_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in the PSE ASIC due to abortion of IMDR), (Recommended Action: *RECUR* Copy the error message exactly as it appears on the console)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-3-CAPS_ADD_DOUBLE_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The SPAN EA encountered a fatal error when trying to enable mirroring for a subset of new monitor-sessions on an interface, and then encountered another error when trying to disable mirroring on the successfully-enabled sessions. It is likely that traffic is being replicated on the interface and that this replication will not be stopped by removing all the interface's monitor-session configuration.), (Recommended Action: Remove all monitor-session configuration on the interface and then issue 'process restart span_ea location' specifying the location on which error was reported. This should stop any traffic replication still in progress on the interface. Attempt to add the required monitor-session configuration on the interface again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-DEBUG_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-CARD_STT_HIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Chassis ambient temperature is over critical threshold. Ambient temperature is the average of the temperature inlet sensor for all RSP plugged in the chassis.), (Recommended Action: Verify the failure, give CLI: (admin)# show env --> particularly temperature and fan output (admin)# show env trace --> to see cards STT values Verify the fan speeds have increased to help bring down the temperature, ambient temperature should decrease with the increased fan RPMs. Chassis can continue to operate in this condition, however cards will shutdown when their hotspot temperature reaches shutdown threshold (STT).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: The server has failed to acquire the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-2-HW_PROG_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This is an informational message in FIB platform to indicate that engine layer identified an error while programming an object in h/w.), (Recommended Action: Please collect the console log, show tech-support cef platform. Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-NODE_ROLE
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemon was unable to obtain the node role. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_3_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_MRIB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support network virtualization?
### Response:
Cisco IOS XR supports network virtualization through technologies like Virtual Routing and Forwarding (VRF) and Secure Domain Routers (SDRs), enabling multiple virtual networks to coexist on the same physical infrastructure.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-SW_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An attempt to initialize a component failed. The error message describes the error, provides an error code and a string interpretation of the error code.), (Recommended Action: Please try to recover by doing the process restart of the process that generated the error. If that fails, please try to reload line card using CLI 'hw-mod loc <> reload'. If the issue persists, collect console log and the following information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces - show tech-support location <> file <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-3-SYSDBINIT
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred when initializing the system database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp redistribute-internal' command in IOS XR BGP configuration?
### Response:
The 'bgp redistribute-internal' command is used to allow the redistribution of iBGP learned routes back into IGP protocols. By default, BGP does not allow the redistribution of routes learned via iBGP into IGP protocols such as OSPF or IS-IS. This command overrides that behavior. It is useful in scenarios where you want the BGP learned routes to be propagated into the IGP for faster convergence.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700-3-ASICPP_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CPU Control driver failed to initialize the ASIC Peek/Poke facility. The effect is that the CPU Control driver debug Peek/Poke facility is not functional. This means that CPU Control Peek/Poke commands used exclusively by Cisco support may not be available. This does not impact normal CPU Control device operations. Note that it is unlikely that this failure would occur by itself. This failure is generally indicative of a larger LC-wide problem.), (Recommended Action: This error is unlikely to occur by itself nor is it likely to be the root cause of the problem. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REAPERD-3-EXITING
### Response:
(Severity: 3), (Category: OS), (Description: The ReaperD process has hit a fatal error and must exit. This will not cause issues whilst XR processes are running, but may impact XR's ability to self heal after process failures.), (Recommended Action: There is no need to take immediate corrective action, but it would be safest to schedule a restart of the box at a convenient point. In addition, a case should be raised with support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-PHY_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PHY related failures), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-INIT_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: An error was encountered while initializing one of the modules of configuration manager server. The failure of this module initialization is not critical to configuration manager to be completely operational.), (Recommended Action: Provide the message details to Cisco Support personal.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-4-COLD_RESET_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the PSE Driver to indicate that it failed to perform cold reset of specified pse instance due to the specified reason.), (Recommended Action: No action is required. Copy the error message and contact tac.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SP_NOT_ZERO_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Non-zero seg profile detected on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-6-INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the platform L2FIB VPLS component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_LSP_DB_CORRUPT
### Response:
(Severity: 4), (Category: ROUTING), (Description: A corrupt LSP was found during a periodic check of the sanity of the specified level's LSP database. When it encounters this condition the IS-IS process restarts itself to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-IP_AP_NOTIFY_INUSE_ADDRESS_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: An error occurred while attempting to notify IP local Address Pool about used addresses), (Recommended Action: 'Try to disable ipsec-chkpt and restart IKE process')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-CONFIG_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Configuration Error is seen on the ASIC.), (Recommended Action: N/A If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA-3-INIT_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS EA process failed to initialize. The System Manager will restart the EA process.), (Recommended Action: Try restarting the QOS EA process.Get the job id 'show processes qos ea location <>' 'process restart <JID> location <>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-UNKNOWN_CFG_TYPE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: shelfmgr tried to read a config type that does not make sense, and so does not exist in the sysdb space.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-6-EA_MIPC_NTFN_HNDLR_FAILURE
### Response:
(Severity: 6), (Category: QOS), (Description: QoS EA encountered an error while processing an MIPC event notification), (Recommended Action: Try restarting QoS EA and/or HFR Platform Manager process get the JID by 'show processes qos-ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-INFO_STARTUP_ABORTED
### Response:
(Severity: 6), (Category: ROUTING), (Description: Startup state-machine controlled startup aborted for the specified reason. Some of the reasons indicate an internal software error, or the failure of anther software service. Other reasons are due to configuration or other operational problems. Finally NSF restart may abort due to no adjacencies being restored, if there were in fact no adjacencies present prior to restart/switchover then this is expected behavior.), (Recommended Action: If the indicated reason can be corrected with configuration changes, then do so; otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_SYSMON-3-PROC_CNT_SEVERE
### Response:
(Severity: 3), (Category: INFRA), (Description: When number of processes/threads has crossed above SEVERE Threshold Percentage.), (Recommended Action: The number of processes/threads running has increased. Determine if there are any unnecessary processes/threads available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_NETIO-3-INIT_DEBUG
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of debug for the NetIO caps. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-NODE_NAME
### Response:
(Severity: 3), (Category: OS), (Description: Unable to query name for node from platform.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INIT-7-INSTALL_THRESHOLD_EXCEEDED
### Response:
(Severity: 7), (Category: OS), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-3-ERROR_REG_PM
### Response:
(Severity: 3), (Category: MEDIA), (Description: pm_fault_register_device() API return error), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-MSG_SEND_EVENT
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when sending an Event Manager synchronous event. This is not a critical error message, on getting the repeated occurrence of this error log, Copy the error message exactly as it appears, and report it to your technical support representative.), (Recommended Action: This is not a critical error message, on getting the repeated occurrence of this error log, Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA-7-DELETE_FAIL
### Response:
(Severity: 7), (Category: IP), (Description: An AVL tree internal erorr occurred while deleting a client node.), (Recommended Action: Do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_12
### Response:
(Severity: 3), (Category: IP), (Description: The MN or Logical-MN is configured for IPv6 or Dual service. Hence IPv6 address family is required for IPv6 traffic forwarding; whereas it is not configured in the VRF.), (Recommended Action: Configure IPv6 address family in the VRF specified in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-CONNECT
### Response:
(Severity: 6), (Category: IP), (Description: An error occurred whilst trying to connecting to the remote host.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-6-HBM_DETAIL_MEMORY_REPAIR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message in the SBUS Driver to indicate details about a HARD memory repair that has been performed on the specified HBM memory.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-CHKPT_INIT
### Response:
(Severity: 7), (Category: SERVICES), (Description: Failed to register an application with the checkpointing server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_HA-4-PROCESS_RESTART
### Response:
(Severity: 4), (Category: ROUTING), (Description: The process is being restarted either because we failed to initialize or we finished resetting shared memory and we are starting fresh.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-HB_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SIM Service Engine complex heartbeat failed, reloading SE complex), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_EVENT_CONN_OPEN
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to open connection with event manager. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-LOOPBACK_SET_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: An attempt to change the Loopback state of an interface failed. This will either be in response to a local command to change the remote peer's Loopback state, or a command on the remote peer to put this interface in slave loopback mode.), (Recommended Action: Retry the Loopback operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_CRP-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to malloc() failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_candidate_rp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_candidate_rp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Using the Job ID from the above commands, run the following to see if the memory is not exceeding. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes memory <Job ID><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes memory <Job ID><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-THREAD_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS failed to create the thread for the operation mentioned in the message. CLNS will try to recover by restarting.), (Recommended Action: CLNS will try to recover by restarting. If it recovers no further action is needed. This error is not expected and very rare. It is usually seen when system resources like memory are very low. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-ISOLATION
### Response:
(Severity: 5), (Category: L2), (Description: All configured core interfaces for the EVPN group are down.), (Recommended Action: Check the core interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-SYSDB
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an error using the SysDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SysDB server, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the ELMI process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-2-SYSDB_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Error in initialization of verification functions with Sysdb or the registration of the debug %s - reason for the error. This error happens on the LC with ATM interfaces), (Recommended Action: Restart the atm_vcm process to recover Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-DLL_INFO_HEAD
### Response:
(Severity: 7), (Category: OS), (Description: Heading for dll info being printed), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PARTICLE_LARGE_POOL_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Large pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-UNABLE_TO_MOUNT_OLD_USB
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Check for partitions and mount Satori internal eUSB. If it unable to mount old USB, then this message will get printed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_1_NPU_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-1 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-REDUCEDFUNCT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The initialization of a functionality failed. This component might still operate without the functionality.), (Recommended Action: This indicate a resource shortage. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-6-INFO_SPM
### Response:
(Severity: 6), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'This message is just for information.No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-RELOAD_NODE_DELAY
### Response:
(Severity: 4), (Category: INSTALL), (Description: 'The primary install director takes several seconds doing some processing ' 'prior to reload, which is not expected. This situation may result in ' 'a different RP to the current active being elected as the active when ' 'the system reboots.'), (Recommended Action: No action is required. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-PFC_UNSUPPORTED_PID
### Response:
(Severity: 4), (Category: FABRIC), (Description: Unsupported hw-module profile priority-flow-control config on the LC), (Recommended Action: Unsupported hw-module profile priority-flow-control config, clean up the config for the LC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_PFILTER_EA-7-INIT
### Response:
(Severity: 7), (Category: ACL), (Description: Initialization of packet filter process has failed due to one of the following reasons: 1) Failed to initialize ltrace. 2) Failed to register with debug. This would prevent process from logging debug messages. 3) Failure to connect with SYSDB. 4) Failed initialize internal permit/deny entries for IPv4/IPv6. These entries are needed for programming/removal of hardware entries for IPv4/IPv6 security ACLs. 5) Failed to initialize connection with interface manager proxy service. 6) Failed to initialize Feature EA DLL API needed for programming of hardware resources. 7) Failed to initialize callback functions from ACL configuration manager to perform hardware resource checks and ACE resequencing. 8) event_block failed. This indicates process has encountered unexpected error while waiting for events. 9) Failed to initialize callback functions for receiving incremental updates for IPv4/IPv6 security ACL configuration.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_NO_RESOURCES_CLR
### Response:
(Severity: 6), (Category: L2), (Description: Resources are now available for this session.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-DU_CREATE_HW_INFO_TYPE_NODE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Creating hw information of type as motherboard, baseboard of node got failed. Also publishing information to sysdb and setting up of sysdb name for platform in hw tree got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-TAKING_NODE_DOWN
### Response:
(Severity: 1), (Category: FABRIC), (Description: Ingressq DLL encountered an fatal error mentioned above. The driver triggers MSC node-down to recover from the error.), (Recommended Action: This might be a recovery action from a fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-5-NEIGHBOR_MISMATCH
### Response:
(Severity: 5), (Category: L2), (Description: The UDLD protocol has detected a potential wiring fault on this link. The link will be disabled.), (Recommended Action: Correct the miswiring, then re-enable UDLD using the following command: - ethernet udld reset interface <port name>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FT_PM_FAN_AIRFLOW_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when fan tray and power modules fans present on the satellite have different airflows.), (Recommended Action: Please use fan tray and power modules which have fans of same airflow type i.e. either sucntion or exhaust.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-INIT_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The SSE QoS EA module failed to initialize. The System Manager will restart the EA process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECY_DRIVER-0-PHY_ACCESS_FAILURE_DETECTED
### Response:
(Severity: 0), (Category: L2), (Description: Secy Driver has detected access (read/write) failure, phy will not be accessible for any further programming request or any operation which involes getting/setting the data to phy.), (Recommended Action: Try reloading the card and if none works, deactivate the faulty card and contact TAC to examine this card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-FILE
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent was unable to carry out an operation on an internal file. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-MBIST_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates possible fault with the NP internal memory.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-OPERATION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card. - Failed to initialize objects. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> show cef platform services trace common all reverse loc <ISM> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CDR_SHM_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric:CDR shared memory error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-ERR_ASIC_LENGTH
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq received a packet with incorrect length either from cpuctrl or Ingress PSE. It is primarily caused by either the link errors between the devices or packet corruption in the upstream asic.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_KERNEL
### Response:
(Severity: 3), (Category: IP), (Description: The Telnet Server has encountered an unexpected error while using the system library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-6-MBIVSN_DIGIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MBI Mgr general info, where one part of the specifiable info is a string, the other a digit.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-5-CCM_ERROR_CCMS_MISSED
### Response:
(Severity: 5), (Category: L2), (Description: The CCM counters displayed in 'show ethernet cfm peer meps' may have missed some CCMs. This is due to a transient issue for offloaded MEPs. Counters will continue to be updated correctly after this message is seen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PDMA SPP Initialization Error message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn spp process, up to a fixed number of times the error is encountered, to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-CREATE_EVENT_CONN
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to create and initialize an event connection structure. If the connection ever goes away, event connection manager will automatically tries to re-connect.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-5-SW_RESYNC_FAILED
### Response:
(Severity: 5), (Category: INFRA), (Description: The specified node needed to refresh its software base. It tried to download a new set of software from the lead RP card and prepare a new disk, but failed to complete the operation.), (Recommended Action: Verify the software image on the specified card using 'show install active'. If needed, correct the software image and reboot the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-4-ERR_SYSDB_EVENT
### Response:
(Severity: 4), (Category: SECURITY), (Description: Sysdb subsystem sent a notification after a configuration change. This notification has an configuration change type that is not known to SSH. So, the configuration notification received has not been processed and configuration change applied.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CRIT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: NPUXBAR bridge has a critical error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-3-ERR_BUF_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered since we calculate buffer space earliear check operation and error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-SOFTWARE_INSTALL
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process attempts to register with Install Manager for notification of software package installation and deinstallation on the system.), (Recommended Action: The process will attempt to recover from this situation by restarting or retrying. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_MRIB
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Error while doing MRIB API), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_TS_CORE_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-1 timestamp core error on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-4-SVC_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: A service API warning is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-3-INTF_MAPPING_CHANGE
### Response:
(Severity: 3), (Category: OS), (Description: An interface handle was received which does not match the interface handle already in the database.), (Recommended Action: Restart the rsi_agent process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9KPAGENT-6-OPERATION_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational condition and/or failure. The process can continue functioning as expected despite the failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-REG_ACCESS_FAIL_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Register access failure on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-CPU_ACCESS_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter driver detected an access non-exist address location error), (Recommended Action: The error message indicates CPU access unmapped register address, the card should be replacedd if the error message persists after a few reloads of the card by either 'hw-module location <> reload' or OIR of the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-SATELLITE_EESMC
### Response:
(Severity: 3), (Category: L2), (Description: The user is attempting to configure an extended ESMC QL on a satellite interface on a satellite which does not support it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-2-ENFORCE_SMART_LICENSING
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is enabled without registering licenses with Cisco Smart Licensing.), (Recommended Action: The customer should enable Smart Licensing to reserve the appropriate purchased license for this image or switch back to Demo mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-SPIO_MODULE_INIT
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon was unable to register the module to send and receive packets. This is likely caused by a memory resource allocation error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_LCPM_SHOW-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SKP_LCPM_SHOW encountered an error), (Recommended Action: Please enable 'debug sysdb access ...' and capture the output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_EDM_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_SYSMGR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Aggregator encountered the annunciated sysmgr error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-VALIDATE_BLOCKS_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to sanitize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered in debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-CIH_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Registeration of the npu driver with the CIH library to process npu ASIC interrupts failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_FMEA-4-OMG_FPGA_TX_RX_FAILURE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-EXTRACT_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Nodeid conversion API has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-SYSDB_SET
### Response:
(Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to set an item in SysDB, so the system may now be in an inconsistent state. Installations will be unlikely to produce the expected results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-PROC_OPTIONS_CORRUPTED
### Response:
(Severity: 7), (Category: OS), (Description: Shared memory for keeping process core options is corrupted. Dumper could have been restarted while it's touching the shared memory. If not, this could be software or OS bug.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-MPLS_EOF_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Service-layer's registration with LSD failed.), (Recommended Action: Service layer's EOF notification to Label Switching Database failed. If this is seen during programming the Service layer, retry programming of EOF. If this is seen during recovery from a process restart, look at Service layer traces for more information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you initiate a system reboot after software installation in Cisco IOS XR?
### Response:
A system reboot after software installation in Cisco IOS XR can be initiated using the 'install reboot' command, which restarts the router to apply the new software configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-4-WARN_HW_HEALTH_MON
### Response:
(Severity: 4), (Category: FABRIC), (Description: The fabric driver verifies the hardware interfaces between the various components on the fabric board. This is done on cold start (POST) and periodically there after. This message is annunciated when any of the tests fail. Failure of test doesn't indicate the card is unusable. It may be a message suggesting an upgrade for the board.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-6-MSG_SEND_FAILED
### Response:
(Severity: 6), (Category: L2), (Description: The channel which is meant for sending message is failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-PKT_DROP
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The packet was dropped due to the specified reason.), (Recommended Action: Collect console log and the following information and contact TAC support with this info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show netio trace all location <loc> -From k-shell, get the output of following command(s) eint_netio_debug)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_WDSYSMON_MEM_STATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an error whilst registering or deregistering with WDSysMon for notifications of changes to the router's memory state. If the error occurs during registration (i.e. when the IS-IS process is initializing) then it will abort and the system may recover automatically when the IS-IS process is restarted. If the error occurs during deregistration (i.e. when the IS-IS process is shutting down) then it is harmless and may be ignored.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_SCH_MEMP_ERR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Scheduler Hang, Sram or egress mid-fifo parity error on NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_MGD_TIMER
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PPP MA process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-4-MTU_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: RFC 1661 requires that the media that PPP is running over is always able to receive PPP packets of sizes up to 1500 bytes (where this value excludes the 4 bytes of PPP header). This is to ensure that the peer can always send control protocol packets up to this size if they ever need to renegotiate. IOS-XR routers set their MRU to the same value as the MTU, and this message has been issued because the configured MTU is too small to meet the above condition.), (Recommended Action: Reconfigure the interface's MTU to a larger value. In order to ensure correct operation with peers, values which provide a layer 2 payload capacity (after allowing for 4 bytes of PPP header) of 1500 bytes or greater are required. Note that as most Control Protocol packets are much smaller than 1500 bytes, it is unlikely that MTU values which are smaller than 1500 bytes will actually cause problems, but this cannot be guaranteed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-6-ERR_LBL_OOR
### Response:
(Severity: 6), (Category: ROUTING), (Description: LSD received a request for label allocation beyond the permitted limit), (Recommended Action: Expected for scale. Else collect lsd and aipc show tech for investigation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-4-SATELLITE_LOGIN_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This indicates that a user has attempted to log into the specified satellite and failed authentication.), (Recommended Action: Check whether the password being used is correct.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-5-RELAYOUTIF
### Response:
(Severity: 5), (Category: IP), (Description: Need to specify an outgoing interface if the relay destination address is multicast. Use the interface option in the relay command or the mhost command.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_PARSE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Parse error'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-SYSDB_BIND_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace sysdb error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace sysdb error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sysdb trace client-errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sysdb trace client-errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-SVR_RSC_UNREG
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to unregister with wdSysmon server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_SYSDB_DATALIST
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The sysdb operation failed. Error text is displayed in the message'), (Recommended Action: Unexpected failure happened while reading data from sysdb datastore. This could affect parser from parsing some commands. Please collect the console log, show logging output, any other messages related to system database, and unexpected syntax error failure in some commands if any noticed. Please contact technical support representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_LOSS_OF_SYNC_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on NPU-0 interface on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_ECM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB encountered an error while attempting to create an event connection manager for the specified path. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-CONDVAR_SIGNAL
### Response:
(Severity: 3), (Category: OS), (Description: Unable to signal cond variable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-TARGET_CFG_CLEAR
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process failed to clear target config buffer. Configured items will not be cleared from buffer.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-DEPLETION_INFO
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Information about the current depletion level of the specified resource. At this level of depletion functionality should not be impacted.), (Recommended Action: Customer should monitor depletion levels using 'show packet-memory' commands. If packet memory reaches higher depletion levels for significant period of time then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-INIT_DEBUG_MSG
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Syslog info/errors during NP init.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_BASE_NETIO-3-MEM_ALLOC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Fwd basecaps dll was not able to get heap memory.), (Recommended Action: This message could be seen under low memory conditions and should recover once memory becomes available. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_EDM-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: Failure occured during creating Event-Manager (EVM) or initialization of Frame-Relay's External Data Manager (FR EDM) process), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_DRV-2-ERR_PHY_RESERVE_START
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Critical information related to physical memory start and size is displayed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-UNINSTALL_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr has failed to install an rpm on the specified node.), (Recommended Action: Inspect the error information and retry the installation after addressing any issues)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-6-REG_PROC_SUCCESS
### Response:
(Severity: 6), (Category: HA), (Description: Process registration for node memory state with wdsysmon is success.), (Recommended Action: No action required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp log neighbor changes' command in IOS XR BGP configuration?
### Response:
The 'bgp log neighbor changes' command is used to enable logging of BGP neighbor status changes. When enabled, BGP will generate a log message whenever a BGP peer enters or leaves the Established state. This is useful for monitoring the stability of BGP sessions and for troubleshooting connectivity issues.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-4-PORT_CREATE
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred when attempting to create a SONET/POS port.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-2-ISSU_ERROR
### Response:
(Severity: 2), (Category: FABRIC), (Description: ISSU Error is seen on the FIA ASIC.), (Recommended Action: N/A If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-BAG_ENCODE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_4_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-TDB_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to delete a table descriptor block from the tdb AVL tree.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_FF_OVF_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA11 Tx burst FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-3-THREAD_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This may be a problem with lack of resources. The MBI infrastructure will be unable to carry out all of its expected functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-2-NON_PROD_LC
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Hardware in the specified location is a non-production hardware and could not be verified as a genuine Cisco product.), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather the output of CLIs 'show diag <lc> eeprom-info', 'show tech-support ethernet interfaces'. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the max-lsp-lifetime command in IS-IS?
### Response:
The max-lsp-lifetime command is used to configure the maximum lifetime that an LSP can have. By default, the maximum LSP lifetime is 1200 seconds (20 minutes). If an LSP's lifetime exceeds this value, it is purged from the database. This command provides an upper bound on the LSP lifetime to prevent stale LSPs from persisting in the network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cpposlib-3-ERROR_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: A process encountered error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_MASTERSHIP-0-ARBITRATION_LOCK_UNAVAILABLE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Failed to grab lock in DR mode as the lock is unavailable. Possible reason: Other RP booted up in Normal mode and permanantly grabbed the lock.), (Recommended Action: Make sure that if one RP is running as DR, the other RP is not booted up in Normal mode. Both RPs should be running either in Dual mode or in Normal mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-PLIM_ASIC_THREAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLIM event thread creation failed. Packet path initialization is aborted and may be retried.), (Recommended Action: Restart the protocol process. 'process restart <protocol> location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-NOT_LMA_FOR_THIS_MOBILE_NODE_3
### Response:
(Severity: 3), (Category: IP), (Description: Either the network (with the name printed in the error message) is not configured under the LMA or the customer, or 'network unauthorized' is supposed to be configured for the customer, but it is not.), (Recommended Action: Configured network under the LMA or the customer using 'network authorized', or configure 'network unauthorized' for the customer. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-BADAUTH
### Response:
(Severity: 3), (Category: IP), (Description: The peer is sending an authentication digest that doesn't match what is configured locally.), (Recommended Action: Check the configuration on both ends and make sure that the password or authentication information is identical.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-MALLOC
### Response:
(Severity: 3), (Category: L2), (Description: A call to malloc failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Try to recover from the low memory condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: L2), (Description: System failed to allocate memory. It's likely that the system is running low on memory. Following are some reasons: 1) Failed to allocate memory for Egressq client add. 2) Failed to allocate memory for Egressq mapping table. 3) Failed to allocate memory for Queue leaky bucket limit table Memory. 4) Failed to allocate memory for Queue leaky bucket limit table memory. 5) Failed to allocate memory for Group leaky bucket limit table memory. 6) Failed to allocate memory for Group leaky bucket limit table memory. 7) Failed to allocate memory for Port leaky bucket limit table memory. 8) Failed to allocate memory for PLIM Asic back pressure table memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_8_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-SWITCH_PON_RESET
### Response:
(Severity: 6), (Category: INFRA), (Description: The Ethernet Switch Driver encountered error, and software attempted to recover the error by resetting the Ethernet Switch.), (Recommended Action: No action is required from the operator. The system will self correct from this condition and it is a transient failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key components of the IOS XR high availability architecture?
### Response:
The key components of the IOS XR HA architecture are\n- Redundant hardware: Includes fans, power, controllers, processors, line cards\n- Process restartability: Critical processes can restart after failure\n- Checkpointing: Allows processes to save state and resynchronize after restart\n- Non-stop forwarding: Packet forwarding continues during control plane failures\n- Graceful restart: Allows routing peers to maintain state across restarts\n- ISSU: Allows software upgrades without traffic loss\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_XAUI_PLL_LOCK_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-1 XAUI PLL not locked on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLCTRLR-4-WARNING
### Response:
(Severity: 4), (Category: L2), (Description: A general warning occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of Multilink Controller(MLCTRLR).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-4-STALE_SESSION
### Response:
(Severity: 4), (Category: SECURITY), (Description: Session is not terminated but the session id is made = 0 . Stale sessions present.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_13_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LOCAL_RSP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_OAM-2-INTERNAL_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Internal error. %s - Failure %s - ifhandle/interface_name/function name This happens on the LC with ATM interfaces), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. atm_oam is not the owner of anything. Process restart of atm_oam will recover the issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-2-INTERNAL_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Internal error. The argument tells the reason. This could be due to several reasons, below are a few of them: - Database walk/insert/delete error - Operation not supported - EA connection trouble - Invalid arguments), (Recommended Action: Try to avoid this based on the reason stated in the message. Or, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-3-SERVO_MODE_CHANGE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PTP Servo mode configuration error), (Recommended Action: This message is for information only, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_MLD-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize MLD module), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-DOMAIN_TAG_NEEDED
### Response:
(Severity: 4), (Category: ROUTING), (Description: At the time of the redistribution of BGP with 4 byte AS number, domain-tag wasn't confiured. User needs to be aware that in this case domain-tag must be configured.), (Recommended Action: If not already configured domain-tag should be configured for the vrf.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-REMOTE_NODEID_MSG_STR_CREATE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Either an invalid location is being queried, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out. %d - indicates the location of the error. %s - indicates the error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-ACL
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server has encountered an error using the IPV4 ACL Library.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-ACT_ARB_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected inconsistency between raw and decoded active arbiter signals.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEAT_MGR-3-MSTATS_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature Manager encountered error on initializing interface with hardware statistics API. Process will be restarted automatically. On restart, Feature Manager will initialize interface with hardware statistics API and no action needs to be taken.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-XFP_RETRY_READ
### Response:
(Severity: 6), (Category: L2), (Description: The Reading of XFP EEPROM failed; Retry is attempted), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SFP_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-LKGP_VERIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while verifying link-group configuraton.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HSRPMIB-4-WARN_OID
### Response:
(Severity: 4), (Category: SNMP), (Description: An OID (object identifier) string failed to be constructed during trap generation. The trap for a cHsrpStateChange notification did not get sent.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-CFG_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-STR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> show cef platform services trace common all reverse loc <ISM> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_THREAD_ATTRIBUTE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while setting the thread attribute during the process initialization sequence. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_AHS_LOS_LANE0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-OVERRUN_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: UART encountered over run error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWM_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: A failure occurred during the process startup of the firewall controller. This is most likely caused by a failure of some piece of infrastructure used by the firewall controller. The error message may give an indication of the root cause of the failure.), (Recommended Action: The process will be restarted by the System Manager - no further action is necessary. If the problem occurs repeatedly, copy the error message and gather the other necessary information, and call you Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-CARD_SHUTDOWN_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The shutdown of the card was unsuccessful due to the reason mentioned in the message.), (Recommended Action: Card shutdown is typically initiated when a card needs to be hard reset. If that fails, only a software reset be initiated. Please collect 'show cctl trace shelfmgr loc' from the node on which this ios-msg is seen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_FIFO_PAR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet parity error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-HOT
### Response:
(Severity: 3), (Category: L2), (Description: A repeating hardware interrupt has been disabled by CPP driver.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_INIT_XAUI
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered a fatal error during interface intialization and is not able recover from the error after retries. A reason text will be supplied. Call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The SliceMgr Proxy process failed to initialize. The System Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-HSSD_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Failure encountered in packet netio HSSD register.), (Recommended Action: Restarting netio may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FAILED_MEM_CACHE_INIT
### Response:
(Severity: 4), (Category: INSTALL), (Description: The memory cache owner failed to initialize the memory cache. The install infrastructure will continue to work, but the booting time for nodes may be slow.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Hard reset recovery action failed. The network processor is in an unknown state and may not be operational.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-3-BIND_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The sysdb ysdb_bind' function returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICLIB-6-DB_DIR_CREATE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The license manager created a directory to store license information. Normally this will occur after the disk holding the license information has been formatted or replaced, or on first boot of a new system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SHUTDOWN
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has encountered a problem which means that is no longer able to continue and so it is shutting down. The message includes a brief description of the problem but will also have been preceded by another message providing a more detailed description of the problem. There are several types of reason why IS-IS may have to shutdown which include a fatal error during process initialization, a fatal problem with a critical service during normal operation, and a roll-over of one of the local system's LSP's sequence numbers. The message also describes whether or not IS-IS has automatically been restarted.), (Recommended Action: Follow the instructions associated with the preceding message. If an automatic restart has been scheduled, then IS-IS may recover automatically. If a manual restart is required, then 'process start isis' is required to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERR_SYSDB_REG_NOTIFY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that registration for notification failed for the tuple specified. %s - tuple %s - indicates the internal error message), (Recommended Action: System manager will automatically respawn this process, up to a fixed number of times, when this error is encountered to recover. Execute 'show process invmgr location 0/x/cpu0' to verify that the process is up and running. If it is non-operational, do 'process restart invmgr location 0/x/cpu0' to manually restart it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_BAD_CODE_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_BAD_CODE interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-2-EPM_SWITCH_LINK_EXCESS_ERR_FATAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: one of critical link of EPM switch has excess CRC errors), (Recommended Action: The board will be reloaded. Switchover would occur if standby RP/RSP is NSR ready. At this stage collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM_COMMON-4-MOVE_FAILURE
### Response:
(Severity: 4), (Category: MEDIA), (Description: Previously due to some error, NVRAM dump file was collected. At the time of collection, permanent storage was not available so it was saved at /tmp directory. NVRAM process tried to move this file out to permanent storage but it failed. This file maybe required to identify if there is real issue with NVRAM device. Collect dump file from /tmp directory for further inspection.), (Recommended Action: Collect dump file from /tmp for further inspection. Collect syslog)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_PATH_ERROR
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified LSP cannot be setup because of path error. \ The first argument is the tunnel name; the second argument is the tunnel; \ the third argument is the LSP Id; \ the fourth argument is the address carried in the path-error message; \ the fifth argument is the error code value(integer); the sixth argument \ is the string representation of the error; the seventh argument is the \ suberror code value(integer); the last argument is the string \ representation of the suberror,), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-USERNAME_CHECK_DISABLED
### Response:
(Severity: 6), (Category: INFRA), (Description: Username creation will not terminate ZTP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-3-GSP_SEND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: %x- Return value of the send the packet over gsp group.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-ERR_INFO
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <ISM> show cef trace location <ISM> show cef platform services trace ipv4 all reverse location <ISM> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-IPARM
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external IP-ARM function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-6-ERR_ASIC_SBE
### Response:
(Severity: 6), (Category: FABRIC), (Description: Fabricq Asic encountered a memory correctable error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-IM_CB_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to register a handler for IM events relating to the specified protocol. This may be due to a low-memory condition but may also be due to internal software programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-2-HALT
### Response:
(Severity: 2), (Category: L2), (Description: A Serious CPP hardware error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-4-SECRET_ALREADY_EXISTS
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error has occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTOROUTE_DESTINATIONS_PATH_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: TE was unable to add an announced destination to the RIB because the \ system limit on the number of parallel paths to an address would have \ been exceeded), (Recommended Action: Reduce configured autoroute destinations to the same address on different \ tunnels to the system scale limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-3-RP_RESET_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: Reset of peer RSP card failed.), (Recommended Action: Please retry the reset of the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-INCONSISTENT_ASPATHMERGE
### Response:
(Severity: 4), (Category: ROUTING), (Description: This message indicates that the AS_PATH and AS4_PATH attributes in the UPDATE consist of segments that are inconsistent when doing a merge, discard the AS4_PATH in this case), (Recommended Action: A counter is available in 'show bgp neighbor', to log this event and displayed only when the count is greater than 0.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-SCH_0_HANG_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Scheduler 0 Hang on bridge instance-0.), (Recommended Action: Please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-NOTLEAF
### Response:
(Severity: 7), (Category: MGBL), (Description: The entered class name is not a leaf class, as is expected by the command.), (Recommended Action: Use the classinfo command to get more information about available class names. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-2-NODE_BRINGDOWN
### Response:
(Severity: 2), (Category: L2), (Description: The PSE driver was unable to perform a critical function and must trigger a node bringdown to effect recovery.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-7-DAILY_JOB_TIMER_RESET
### Response:
(Severity: 7), (Category: LICENSE), (Description: This message is used only for testing and does not indicate an error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SSE_NETIO_LIB-4-GET_MYNODEID_FAIL
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Unable to determine my node id using platform api.), (Recommended Action: Please capture show proc output and show logging output - 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-ADD_GROUP_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Unable to add membership to the group.), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-5-SRLG_OVERFLOW
### Response:
(Severity: 5), (Category: L2), (Description: Maximum 100 SRLGs can be configured per DWDM port at the CRS. If some application like CTC has more than this number to configure, it indicates this situation by configuring the 101st value with a positive integer. The above ios_msg gets logged in this scenario.), (Recommended Action: It is just a notification.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPP_TCAM_RM-3-LOG_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in CPP TCAM RM which involves exiting the process.), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure tcam resource-manager usage location < > * *SH_CMD show controllers pse qfp infrastructure tcam resource-manager error parity location < > * If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-UC_HI_SBE_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Unicast high priority fifo single bit ECC error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_LAS_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred whilst accessing the link-local address details for the specified interface. As a result IS-IS will not be able to use the specified address-family on the specified interface. This could be due to a low memory condition or an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-VRF_ALREADY_ASSOCIATED_WITH_EVI
### Response:
(Severity: 3), (Category: L2), (Description: VRF can only be associated with one EVI.), (Recommended Action: Remove vrf from one of the two EVI config to clear misconfig.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-2-FABRIC_FATAL_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric encountered multiple fabric link faults and is unable to recover.), (Recommended Action: Fabric encountered multiple fabric link failures. Fabric auto recovery cannot recover from this faults. Isolate the impacted cards.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-TMA_FULL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects TMA_FULL and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-3-MSG_CERR_REGISTER_DLL
### Response:
(Severity: 3), (Category: HA), (Description: The API call to register the dll failed.The system may not function properly.), (Recommended Action: Try restarting the process to recover. If the issue is still seen contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Serial-3-NULL_HW_FUNC
### Response:
(Severity: 3), (Category: L2), (Description: Failed to program the hardware.), (Recommended Action: Use Topic to search for a similar DDTS. If you find none, write a DDTS for this problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD_LIB-5-THRESHOLD_EXCEEDED
### Response:
(Severity: 5), (Category: ROUTING), (Description: Threshold configured for RCMD monitoring was exceeded. This notification can be monitored by RCMD diagnostics mode to trigger collection of additional debugging data.), (Recommended Action: This notification is generated only when RCMD diagnostics mode is enabled. It will trigger collection of debug information via EEM script. If the time taken is unusually high then further analysis can be performed on the collected data and corresponding RCMD report.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-INITSYNC_PFX_MISMATCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: The number of prefixes synced by active doesn't match the expected count.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-MEM_ALLOC_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The process failed to allocate memory for the specified resource. This could be because the IS-IS topology is too large for the memory installed in the router.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-UDF_TCAM_SIZE_CHANGED
### Response:
(Severity: 6), (Category: ROUTING), (Description: Whenever IPV4 UDF TCAM key size exceeds default size(160bits), need to update user. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-7-UNABLE_TO_GET_NODENAME
### Response:
(Severity: 7), (Category: OS), (Description: Unable to get the nodename of this card), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_GET
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the item to fetch does not exist. The details are in the error string.), (Recommended Action: Check that the requested item exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some of the event detectors available in EEM?
### Response:
EEM in Cisco IOS XR supports various event detectors, including Syslog messages, SNMP traps, timer events, counter thresholds, interface status changes, and more. These event detectors trigger EEM policies when the specified conditions are met.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKSTAT-3-REMOTE_FILE_WRITE_ERR
### Response:
(Severity: 3), (Category: SNMP), (Description: Username or password specified in the error message might not have the required privileges to write a file to the network management station specified in the error message, or the destination directory specified in the error message is invalid.), (Recommended Action: Ensure that the user name and password in the network management station address has the necessary privileges to write to the destination directory.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-GSP_MSG_RCV_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in retrieving a message from GSP.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: CEPKI crypto error message with errno string and errno.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_FAN_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Fan Failure (SAT_FAN_FAIL) alarm is raised when there is a faulty fan-tray assembly.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show mpls forwarding' command in IOS XR?
### Response:
The 'show mpls forwarding' command is used to display the MPLS Label Forwarding Information Base (LFIB). The LFIB is the data structure used by the forwarding plane to make forwarding decisions for MPLS labeled packets. It shows the incoming label, outgoing label, outgoing interface, and next hop for each MPLS forwarding entry.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_ARG_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred due to invalid argument as input to the function in stats infra component.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-3-SERVER_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was encountered while trying to initialise the Server Process The error can occur in two conditions. 1. During global HAL layer initialization 2. During TLU HAL Layer initialization), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Interrupt controller Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_SWITCH-3-PKT_STALL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The control ethernet traffic has stalled on the CPU port in SP/LC node. If the messages are constantly seen, contact tech support with the output of the given command.), (Recommended Action: '*SH_CMD admin show tech-support control ethernet fast loc <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IS-IS establish adjacencies on point-to-point vs broadcast networks?
### Response:
On point-to-point links, IS-IS routers send LSPs directly to each other and use PSNPs to acknowledge them. On broadcast networks, the DIS multicasts CSNPs listing all LSPs, and all routers synchronize their databases based on the CSNPs without direct LSP exchange.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CHKSUM_ERR_0_FIA_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checksum error - 0 from FIA on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-RN_PRNT_LINK
### Response:
(Severity: 3), (Category: MGBL), (Description: A deletion operation to an internal data structure failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CISCOSYSTEMMIB-3-CLOCK
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble in getting time), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-6-FAULT_DEBUG
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Information message.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-6-ENFORCE_EVAL
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled for an evaluation period.), (Recommended Action: The customer should consider purchasing the license.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-PLATFORM_MAX_PATHS_EXCEEDED_RIB_MAX
### Response:
(Severity: 3), (Category: ROUTING), (Description: Platform ECMP support number exceeded RIB capability.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-0-ZENJF_FATAL_EVENT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The PRP FPGA Manager gets a fatal ZenJF FPGA event, and requests board reload.), (Recommended Action: Provide the required information to support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-5-THRESHOLD_CLEAR
### Response:
(Severity: 5), (Category: MGBL), (Description: A threshold condition has cleared for the operation), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of configuration templates in IOS XR?
### Response:
Configuration templates in IOS XR allow you to define a common set of configuration commands that can be applied to multiple entities, such as interfaces. This promotes consistency and reduces configuration errors.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install label command in IOS XR?
### Response:
The 'install label' command is used to assign a label to a set of packages. This label can then be used in other install commands to refer to that specific set of packages, making it easier to manage and identify them.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-5-POLICER_UPDATE_STATUS
### Response:
(Severity: 5), (Category: OS), (Description: The update status of LPTS policer with Error Info if update gets failed or Success.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-PARSE
### Response:
(Severity: 3), (Category: MGBL), (Description: The platform library could not parse the interface name.), (Recommended Action: The interface name flagged as an error could not be parsed by the platform libraries. This interface name should be corrected by the user during the next configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checkpointing is a mechanism to update the redundant RSP with the current configuration and status of the system to help takeover in case of a failover. The checkpoint mechanism needs to be initialized for Sync-controller to update the standby RSP with current frequency syncronization status.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-6-ETH_SERVER_READ_INFO
### Response:
(Severity: 6), (Category: OS), (Description: Convertion of packet to IOV has failed resulting in this error. We keep retrying after regular interval of time as mentioned above in the log %x- Status %d- Number of retires %d- Number of secs before next retry attempt), (Recommended Action: Ignore the message as its just an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-SHMWIN_INIT_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize shared memory window), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_RM-1-SYSDB_MSG
### Response:
(Severity: 1), (Category: L2), (Description: Error in sysdb operation. Error while setting the value in sysdb. first %s - type of the error second %s - reason of the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. retry the commit operation of the failed tuple based on the error message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_GET_INH
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the items to fetch do not exist. The details are in the error string.), (Recommended Action: Check that the requested items exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICEMGR-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: LIBRARY), (Description: SLICEMGR Library Initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP_LTRACE-6-ERR_INFO_VERBOSE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the the platform L2FIB LTRACE component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_ASIC_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while initializing the CPU control ASIC to either receive packets from the fabricq ASIC or transmit packets from the ingressq ASIC. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If problem either persists (following a process restart) then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKSTAT-3-REMOTE_FILE_TRANSFER_QUEUE_FULL
### Response:
(Severity: 3), (Category: SNMP), (Description: remote file transfer queue is full because of issue in transferrring file to remote location for the profile specified in the error messag. any new data collected will be dropped.), (Recommended Action: ensure that there is enough space in the remote directory. if the remote transfer is of type tftp, Pls check network reachability and health of tftp_fs process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-RCFG_BATCH
### Response:
(Severity: 4), (Category: SERVICES), (Description: An error has occurred sending information on service attachments to interfaces local to the node to remote nodes.), (Recommended Action: For non-resource errors, removing and adding back the configuration that prompted the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA-6-DEBUG_INIT_ERR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An unexpected initialization error has occurred while trying to initialize the debugging module in the platform ICPE EA component.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-UNKNOWN_TIMER
### Response:
(Severity: 3), (Category: OS), (Description: Timer, with unknown timer-id, fired.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR3_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-3 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_ATOM-3-DEBUG_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB ATOM component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-ROOT_ALREADY_SET
### Response:
(Severity: 3), (Category: MGBL), (Description: attempt is made to set root of the tree twice.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-OUT_MEM_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an output memory error on link 1), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
flash_platform-7-MODEL_NOT_REGISTERED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Filesystem return only string format model id. We maintain an exhaustive list of un-supported Hard Drive Disks. Compare our model against this list. If this node's model id is not registered in the reliable or unreliable list. Then it displays the error message as Model not registered.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-2-LC_INPUT
### Response:
(Severity: 2), (Category: ROUTING), (Description: CLNS on the LC does not process any packet. It will ignore any packets it receives on the LC.), (Recommended Action: Please contact cisco-support in case this message is seen multiple times. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-2-NON_PROD_EP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EP in the specified location is a non-production hardware and could not be verified as a genuine Cisco product.), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather 'show tech-support ethernet interfaces'. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
atmdrv-2-STS_DLL_FAILURE
### Response:
(Severity: 2), (Category: L2), (Description: ATM driver failed to load PAL DLL), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support atm <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support atm <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-6-FREE_ALL_RSRC
### Response:
(Severity: 6), (Category: L2), (Description: The client has initiatated freeing all resource operation.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_INFRA_SECONTROLLER-6-INFO
### Response:
(Severity: 6), (Category: SERVICES), (Description: The message is just an information about the interface.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_TO_DDR_FIFO_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP to Tx DDR FIFO full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_OC_PKT_TOO_LONG
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EBS from FIA packet too long error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-FPGA_PCI_INIT_FAIL
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was trying to Init PCI memory space for the CCC FPGA .It encountered an error from Kernel PCI routines. This can happen in 3 scenarios - CCC driver was unable to find the CCC FPGA PCI device - CCC driver PCI registration failed - CCC driver failed to enable CCC PCI MSI If 5 restarts of the CCC driver dont fix the problem card will reload to recover), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-PULSE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Send pulse failed for SPP PDMA. %s- Function Name. %d- Line number.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-4-XR_PART_PREP_RPM
### Response:
(Severity: 4), (Category: INFRA), (Description: SDR Mgr has requested for SDR partition. Install did not find any partition with matching software. New partition is created and basic image baking is done. Additional RPM installation is in progress. User has to wait until SDR/XR is spawned. Reloading of card has to be avoided till SDR comes up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-RETRANSMISSION_LIMIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Retransmission limit exceeded.), (Recommended Action: 'Contact administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-UNLINK_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition, the ftruncate failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE3_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE3_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON_LIB-3-FAIL_TO_INIT
### Response:
(Severity: 3), (Category: INFRA), (Description: An unrecoverable error occurred during watchdog monitoring service initialization. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM_OFFLOAD-4-TIMEOUT_DROP
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: An error was encountered while attempting to deliver a notification of a timeout event to the Connectivity Fault Management (CFM) protocol. This is a transient problem from which the system should recover, but CFM may take longer to identify connectivity errors until it does. This may indicate the system is under unusuallay high traffic load.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-UPTIME_RECORD_NOT_FOUND
### Response:
(Severity: 7), (Category: OS), (Description: Uptime record is not found), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-OBJECT_NOT_FOUND_FOR_RANGE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The range value was given as a parser object ,but object could not be found'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-NO_PRIVILEGES
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured as there was no IO privileges. This might be a program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_EXCESS
### Response:
(Severity: 4), (Category: SYSDB), (Description: There were more tokens entered as part of the command string than are required for the command.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-6-ERR_STR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An error occurred in stats infra component. The error string gives the reason for the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-UNKNOWNCARD
### Response:
(Severity: 7), (Category: OS), (Description: Platfrom card type unknown to dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show platform)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_GET_RESPAWN_COUNT
### Response:
(Severity: 4), (Category: ROUTING), (Description: A call to system manager to obtain the process respawn count failed. This is a recoverable error, and the count will be assumed to be 1.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-EFD_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: An interface was shut down or brought up using EFD after a fault condition was detected or cleared, or due to a change in configuration. This has occurred because EFD is the configured action for this fault condition.), (Recommended Action: None - this message is for information only and does not indicate an error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-CLEAN_ALL_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Failure while doing all reource cleanup), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-LASER_SW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The operation is failed due to an internal software error. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause linecard reload. %s - description of the operation. %d - lane number. %s - description of the error.), (Recommended Action: Check if the linecard reported any other errors. May need to restart process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABVQI-2-CONFIG_REJECTED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Config not supported on the chassis. Check the chassis type, RP type and LC types. Certain LCs in the system do not support the config. So config is rejected.), (Recommended Action: Config not supported on the chassis. Check the chassis type, RP type and LC types. Certain LCs in the system do not support the config. So config is rejected. Power down the LCs indicated by the slot-mask and retry.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-BCDL_INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Obituary Call to reinitialize bcdls has been unsuccessful.), (Recommended Action: Collect LSD traces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-3-ILI_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt fpga detects interlaken module errors), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ bias greater than or equal to the high bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_FDB_MAC_ADD_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected a failure in Forwarding database static MAC add operation. When this occurs, control ethernet traffic may be impacted on some switch ports leading to inconsistent connectivity.), (Recommended Action: To determine why this problem occurred, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support ' 'control-ethernet' and 'show tech-support ctrace' commands. Do not do any system upgrade or Failover on affected Rack when this error occurs. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-IDB_VRF_BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONAUX-3-CONSOLE_REG_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ConAux Identity module has been unable to register the console TTY.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-RIB_BIND_FAILURE
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while attempting to bind to the RIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-RX_RIB_REDUND_PROTO_NOTIF
### Response:
(Severity: 3), (Category: ROUTING), (Description: LDP has received a redundant protocol registration notification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered the specified error during the initialization sequence. This facility is deemed crucial and hence the process is automatically restarted on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-RESET_FN_PTRS_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while reseting memory allocation and delete function pointers in btree due to one of the following reasons: 1. Invalid tree reference handle 2. Function Pointers are null), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-RX_INSTALL_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: RxSA/RxSC programming has failed for the RxSCI. As recovery, session would be bought down on this interface, followed by session bringup. Traffic hit expected.), (Recommended Action: contact cisco-support by sharing the tech-support macsec.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-3-ALLOC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to allocate FGID for bridge broadcast doamin.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_ISSU_TIMER_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: PD FGID NSF Timer elapsed during ISSU. This is not expected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-FORCED_POWEROFF
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An attempt to force the powering off of the node has been performed to make sure that the affected node will remain in powered off state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-LISP_IID_MAPPING
### Response:
(Severity: 3), (Category: ROUTING), (Description: This reflects a failure in the maintenance of the lisp instance id to EID table mapping for the specified RLOC table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_15
### Response:
(Severity: 3), (Category: IP), (Description: This indicates an internal software inconsistency.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EAGLE-7-ERR_MSG
### Response:
(Severity: 7), (Category: L1), (Description: Eagle driver might run into an error that is not a FATAL.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-3-SPI_BUS3_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a SPI4 or SPA Bus Error for SPA2 (SPA Bridge0) or SPA3 (SPA Bridge1).), (Recommended Action: Remove the SPA. Examine the SIP bay and the SPA connector pins for damages. If no damage found reinsert the SPA. If the problem persists, call tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-FSV_REG_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: This is a transient error and it happens when the packet mamager process is temporarily unavailable.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-3-NODEID
### Response:
(Severity: 3), (Category: L2), (Description: dwdm encountered an internal error and an attempt to recover from this condition failed . Possible reasons can be the inability to find node-id.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_1_OFLOW_FIA2BR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-1 FIA to bridge instance-2 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-ASIC_INIT_ERROR
### Response:
(Severity: 1), (Category: FABRIC), (Description: Asic init error detected on FIA instance.), (Recommended Action: If the alarm is raised on RSP/RP or multiple FIA instances of LC and the card is up and running in IOS XR RUN state then please try reloading it for possible recovery. If the alarm is raised on a single FIA instance of LC and the card supports Advanced Power Management (APM) feature then one can also try powering off a slice and powering it back on. If the same alarm is raised across multiple card reloads then it is possibly an issue in hardware and might need RMA. Please collect the information as per required_info section before card reload or RMA)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_ANNOUNCE
### Response:
(Severity: 3), (Category: FABRIC), (Description: EES domain enabling failed. This will prevent ucd/mcd messages to be exchanged between the applications and driver.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_2_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-LABEL_ERR_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Route already has a local-label from another protocol.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an error to create its event manager for receiving events. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_TIMER_WHEEL
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an unexpected error using the Timer Wheel library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PPPoE MA process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCC-2-INCONSISTENCY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Bundle Consistency checker detected inconsistencies (either missing or leak) entries in BM PI/IM PI/PIDB/BME/DPA/BCM. Please check the content of /var/log/bcc_inconsistencies.log for findnig which entries are missing or leaking. This may result in bundle down issues), (Recommended Action: Delete and create the affected interfaces based on the log file.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE5_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE5_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-UBLAZE_PRE_BOOT_FAIL
### Response:
(Severity: 3), (Category: DRIVER), (Description: The MicroBlaze in CCC has detected a fatal condition that is preventing the card from booting. The CCC driver will attempt to recover from this failure by issuing a CCC COLD RESET operation.), (Recommended Action: Physical remove and then re-insert the card to see if the problem can be corrected if the auto recovery mechanism performed by the CCC driver cannot recover the failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-THRESHOLD_NO_ACTION
### Response:
(Severity: 4), (Category: INFRA), (Description: The specified SLA threshold has been breached. However, the breach was in a bucket that was considered to be suspect and therefore the corresponding action has not been taken.), (Recommended Action: The threshold breach may or may not be related to the suspect bucket. Therefore, wait for the next non-suspect bucket to determine whether this is a genuine threshold breach or not.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-REDUNDANCY_INIT_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed to init redundancy state. This will restart OBFL manager.), (Recommended Action: If the issue is seen after restart, Please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-ERR_PORT_ID_RECLAIM
### Response:
(Severity: 4), (Category: L2), (Description: When recovering the existing data from checkpoint following a restart of the MSTP controller process, the indicated port ID has been found to be in use on two or more ports, including that named. The indicated port will not be used by MSTP until the problem is cleared.), (Recommended Action: Removing and re-adding the indicated port from STP configuration should result in the error being cleared.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAN_SYNC_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 chan sync error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SCAN_DLLDATA_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Core dump failed because scanning the dll data failed.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP next-hop-self command?
### Response:
The next-hop-self command causes BGP to advertise itself as the next hop for advertised routes. It is commonly used on iBGP peerings to ensure that the iBGP peer uses the local router as the next hop instead of an eBGP router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-3-OPEN
### Response:
(Severity: 3), (Category: L2), (Description: This error is generated when the open() system call fails.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE policy-class feature?
### Response:
The MPLS TE policy-class feature allows the mapping of traffic to specific TE tunnels based on match criteria such as access lists, packet length, or QoS parameters. Policy-classes define the matching rules and the tunnels to which the traffic should be mapped. This provides granular control over traffic forwarding into TE tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-7-INSTALL_NOTIFICATION
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-MOD_INTF_LIST
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when MRIB tried to walk the modified interfaces list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_FMT_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR FMT Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_NH_PATH
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured when trying to add a path to the next-hop database.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-IOFPGA_PWR_GLITCH
### Response:
(Severity: 4), (Category: DRIVER), (Description: Card manager has received an interrupt for power glitch for the IOFPGA board. It is caused by glitch in one of the power rails of the IOFPGA board specified in the log.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP logging?
### Response:
To configure LDP logging, use the 'log' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#log neighbor-changes
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP with a neighbor?
### Response:
To configure BGP and specify a neighbor, use the 'neighbor' command in router BGP configuration mode. RP/0/RP0/CPU0:router(config)#router bgp 65000
RP/0/RP0/CPU0:router(config-bgp)#neighbor 192.168.1.2 remote-as 65001
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-SHELFMGR_REG_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-RSI_C_LIB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The IS-IS process failed to initialize the RSI service for the specified error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_ETH_MGMT-3-DEBUG_START_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error detected when starting the eth mgmt debug messages. process will restart automatically to recover from this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-MEM_CORRUPT_TX_REQUEST_ARRAY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received UART message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-SEQ_STATE_PRE_OP_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: Ingressq driver state machine encountered an error.Driver will continue to retry.), (Recommended Action: Verify that the ingressq driver is up and running by executing the following command at the CLI of the active RP: 'show process ingressq location < >' If it is still non-operational, enable the following debugs of the ingressq driver process: asic error asic fatal asic info and restart the driver by executing the following command at the CLI of the active RP: 'process restart ingressq location < >' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IPV6_EA-3-ERR_INFO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails due to failure during forwarding feature programming. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install commit command in IOS XR?
### Response:
The 'install commit' command makes the current active software packages persistent across reloads. Without this command, the router would revert to the previously committed software set after a reload.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_VPLS-3-DEBUG_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB VPLS component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-VIRT_INST_INTERFACE
### Response:
(Severity: 3), (Category: OS), (Description: The number of configured virtual port group interfaces must match the number of Ethernet Network Interfaces defined in the machine definition file.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-FI_LINK_ALARM
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq ASIC encountered a link alarm), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB_CLIENT-3-GEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with the server process. It may be caused due to invalid api arguments by client process or a transient condition while the server process is initializing the ASIC), (Recommended Action: This message may indicate a transient condition while the card is booting up. Please check if the error message is seen continuously even after the card has reached IOS-XR RUN state. And if so, then try to power cycle the card. If the message is seen in every power cycle after the card is in IOS XR RUN state then please contact tech-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-INSTALL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ISO image installation running on the indicated card is reporting an error condition. This condition does not stop the installation operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APM-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message notifies user when a slice configuration has been successfully completed.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-INVALID_BAY
### Response:
(Severity: 3), (Category: L2), (Description: The bay number is invalid), (Recommended Action: Give correct and supported bay number)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-MBI_BOOTING_MID_INSTALL
### Response:
(Severity: 6), (Category: INSTALL), (Description: Nodes can not boot up mid-install as this will invalidate the runnning software set. Once the install has completed then the node will be allowed to complete its boot as normal.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-1-ERR_SW_DLL
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabricq encountered an internal software dll api error Following are some of the reasons for this internal error: 1) mutext init 2) thread creatation 3) cai API failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-3-CLIENT_QUEUE_OVERFLOW
### Response:
(Severity: 3), (Category: ROUTING), (Description: The nofitication queue for the specified client has overflowed. Notifications are being dropped and the client has become out-of-sync. Immediate corrective actions required to reduce impact of TE traffic.), (Recommended Action: First determine the cause of the queue overflow. There is a problem causing the client to become unresponsive, or otherwise not able to process the queue fast enough. The client could be blocked, or 'rsvp' could be exposed to a prolonged packet burst/flood. Check CPU load, process states and incoming RSVP packet rate (use CLI 'show rsvp counters message' for sampling). Once the cause is corrected, a restart of the client is necessary to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CDR_HW_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Failed to initilise fabric CDR hardware.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-DDR_BUS_BIT_STUCK_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: DDR bus databit stuck on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is BGP conditional route injection?
### Response:
BGP conditional route injection allows a route to be injected into BGP only when another route exists in the routing table. It is configured using the bgp inject-map command which specifies a route map. The route map matches on the injected route and specifies an exist clause to match the existence of another route.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens when you insert or remove a node in IOS XR?
### Response:
When you insert a new node in IOS XR, the system automatically applies the current running configuration to the new node. When you remove a node, the configuration specific to that node is automatically removed from the running configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR backup tunnel preemption feature?
### Response:
The MPLS TE FRR backup tunnel preemption feature allows a backup tunnel with a higher setup priority to preempt an existing backup tunnel with a lower hold priority. This ensures that higher priority backup tunnels can be established even if lower priority tunnels are consuming the backup resources. It provides a way to prioritize critical backup tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_SCH_MEMP_ERR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Scheduler Hang, Sram or egress mid-fifo parity error on NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_LIB_TOKEN-7-DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when cleaning up debug.), (Recommended Action: This is not a critical error message and it can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-3-IMA_DISK_LOST_BLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred during IMA cache validation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-PATH_BP_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to delete a path from an interface or next-hop descriptor block's path backpointer list.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIB-3-NOMEM
### Response:
(Severity: 3), (Category: SNMP), (Description: The requested operation could not be performed due to a low memory condition.), (Recommended Action: If this message is persistent, check memory usage Try to have sufficent memory conditions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-6-DEBUG_ERROR
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: An invalid value was received for the debug flag.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-MISSING_APPHOSTING_PARTITION
### Response:
(Severity: 3), (Category: INFRA), (Description: The apphosting/docker partition is missing from the disk on the node emitting the syslog. The change introducing this feature requires the upgrade to be performed by reimage, rather than through the install infrastructure. It is necessary to reimage to correct the disk partitions.), (Recommended Action: Reimage the node, in order to correct the disk partitions.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-ARTIFACTS_SYNC_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Artifacts sync failed description), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-2-PARITY_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Timing software detected a parity error from interrupt controller), (Recommended Action: If a redundant RSP card has been configured: 1 - force a failover with the following command in admin mode: 'redundancy switchover'. 2 - reload the RSP card that failed with the 'reload location' command in admin mode. If no redundant RSP is configured, you will need to reboot the router by issuing the above reload command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-NODE_RESET_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the Shelf Manager or Platform Manager encountered a critical alarm for the node specified. It will attempt to reset the board which sends the alarm.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-0-PERMANENT_ONBOARD_LINK_DOWN
### Response:
(Severity: 0), (Category: FABRIC), (Description: This alarm is raised indicating a local onboard fabric link is permanently down on the card. Software will reload the card to recover from this situation. recommended_action: If this alarm is seen across multiple reloads then please contact Cisco TAC support asap as the card possibly has a permanent hardware fault. *RECUR*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-4-UNSUPPORTED_FAREND_CARD
### Response:
(Severity: 4), (Category: FABRIC), (Description: The LC and FC board combination in the 2 slots are unsupported and 1 of them should be removed otherwise fabric links between these boards will not come up), (Recommended Action: Remove 1 of the boards from the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_MQ_PKT_LEN_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 1 MQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-RANDOM_DETECT_RANGE_MIN_MAX
### Response:
(Severity: 3), (Category: QOS), (Description: Configured random-detect minimum threshold exceeds the configured maximum threshold), (Recommended Action: Please adjust the random detect thresholds)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_INTF_DB_INFO_ALREADY_SET
### Response:
(Severity: 4), (Category: SECURITY), (Description: If the interface ID is already present, the Firewall Controller has been informed of a Firewall Application interface create, but found that its database already contains the Firewall Application interface ID. If diversions were already present, the Firewall Controller has been informed of diversion creation for an interface, but found that its database already contains diversion information for the interface. This error message indicates an inconsistency in the firewall database, which may result in unexpected behaviour.), (Recommended Action: If this message is seen and the state of firewalls on the router does not match the expected state as a result of configuration, restart the Firewall Controller process using the 'process restart' mechanism.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-NODEID_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: Failed to get nodeid.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-6-MPA_AUTO_RECOVERY
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MPA auto recovery power on started.), (Recommended Action: NONE)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-6-LOOPBACK_ENABLED
### Response:
(Severity: 6), (Category: L2), (Description: Loopback has been enabled & may affect other traffic flows.), (Recommended Action: No action is required unless the user observes issues with other traffic flows on this interface. If traffic loss occurs, consider disabling loopback on this interface or consult with your local TAC representative on your platform's capabilities.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_UNRESOLVABLE_MISCONFIG_DISCONNECT
### Response:
(Severity: 5), (Category: L2), (Description: The misconfiguration supplied could not be resolved by arbitration and so the mLACP system disconnected from the peer node on the given ICCP Group.), (Recommended Action: Remove the mLACP ICCP Group configuration from both routers and apply the correct configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECY_DRIVER-0-KAT_FAIL_PROCESS_RESTARTED
### Response:
(Severity: 0), (Category: L2), (Description: Secy Driver has detected POST(Power On Self Test) KAT(Known Answer Test) failure, due to process restart during the test period. Reload the LC to proceed if the restart is intentional.), (Recommended Action: Collect showtech support optics and showtech support ofa. Collect the core file. If the restart is intentional, reload the LC to continue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBQSMGR-1-INVALID_API_USAGE
### Response:
(Severity: 1), (Category: INSTALL), (Description: This process is not using QSU Manager APIs correctly.), (Recommended Action: There is nothing that can be done about this error, as it indicates a programming defect. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-CDR_HM_ENABLE
### Response:
(Severity: 6), (Category: FABRIC), (Description: Enable/Disable CDR Health Monitor for the card), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-4-FAILED_CONFIG_NOT_DELETED
### Response:
(Severity: 4), (Category: MGBL), (Description: The failed_config file should be deleted when all the configurations are successfully reapplied.), (Recommended Action: Check for failed_config under bootflash:/config and delete the file using 'delete bootflash:/config/failed_config'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_REGISTER
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_register failed while creating a chkpt table id.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPP-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: The IPSec IPP encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-HW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Plim Asic errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and can trigger a reload of the LC.), (Recommended Action: Check whether process 'pla_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure load balancing for an L2VPN?
### Response:
To configure load balancing for an L2VPN, use the 'load-balance' command within the bridge-domain configuration mode. l2vpn
bridge group BRIDGE-GROUP-NAME
bridge-domain BRIDGE-DOMAIN-NAME
load-balance flow
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEAT_MGR-3-TCAM_LIMIT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This message will typically occur when permissible single region size is exceeded or total number of entries allowed in TCAM for a given application is exceeded.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-OIR_RESTORE
### Response:
(Severity: 6), (Category: MGBL), (Description: This is message indicates that configuration for this node has been restored.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_NO_CONNECTION
### Response:
(Severity: 4), (Category: L2), (Description: Failed to find existing QFP connection), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. before reloading the line card If this problem persists, reload the line card using <CmdBold>hw-module location <>/<>/CPU0 reload<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSMGR-3-PROXY_INIT_FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: A failure occurred initializing a necessary module of the QS Manager Proxy process. The process is unable to run and will respawn to retry. The system may be in an unstable state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_0_OFLOW_NPU2BR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-0 NPU to bridge instance-2 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-0-SEU_CRC_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Punt fpga detects seu CRC errors), (Recommended Action: Card will be reloaded as an attempt to fix issue: Can attempt manual reload using 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-INSTMGR_RESTART_INFO
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that the install manager process will be restarted as part of the specified install operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-NOT_THREADED_MSG
### Response:
(Severity: 3), (Category: MGBL), (Description: attempt is made to delete non existing node from data structure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-5-LOCATOR_UPDOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: The state of SRv6 locator has changed to up/down. A locator can go down due to few reasons (missing prefix config, prefix config overlap with some interface IP address). This message appears only if the <Bold>segment-routing srv6 logging locator status<NoBold> command is configured.), (Recommended Action: If locator went down, then debug using the configuration or IP address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-3-TRACE_INIT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The 802.1Q NetIO component encoutered an error during trace buffer initialization. This is likely to cause VLAN interface setup to fail.), (Recommended Action: If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAMSG-3-ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA related error msg), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_SOCK-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: An error occured in the event loop. The process will restart which should recover the situation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA-3-GROUP_SEND_NODE
### Response:
(Severity: 3), (Category: IP), (Description: An internal error was detected when trying to send a GSP message to the given node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different types of LSAs used by OSPF?
### Response:
OSPF uses several types of LSAs: 1) Router LSA (Type 1) - Describes the state and cost of the router's links to the area. 2) Network LSA (Type 2) - Describes the set of routers attached to the network. 3) Summary LSA (Type 3) - Describes routes to destinations outside the area but still inside the AS. 4) AS External LSA (Type 5) - Describes routes to destinations external to the AS, usually learned via another routing protocol.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VMANCLNT-6-VMAN_INFO
### Response:
(Severity: 6), (Category: LIB), (Description: Info messages from virtualization manager client library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-MGDTIMER
### Response:
(Severity: 3), (Category: OS), (Description: A software or hardware error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-MBIST_STATUS_INFO_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: MBIST test failed. Board will reload to resume normal operations.), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
flash_platform-3-GET_PARTINFO_DEVICE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Device controller opens the device to get the partition information. Among the partitions, it needs stale byte information of the device. When Device controller unable to get the partition information on device it displays the above error message.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-7-NO_MEM
### Response:
(Severity: 7), (Category: INFRA), (Description: Allocating memory failed due to a low-memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-4-PM_FAULT_SET_BY_TEST_TOOL
### Response:
(Severity: 4), (Category: LIBRARY), (Description: The power module fault was generated by test tool.), (Recommended Action: Use the test tool to clear the fault/warning.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PMLIB-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: svc pmlib encountered a fatal error and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_SOCKET-3-DPC_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The fr_socket process failed to send Data Path Control(dpc) message to Netio), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-SA_DOWN
### Response:
(Severity: 6), (Category: SECURITY), (Description: IKEv2 SA is deleted.), (Recommended Action: No Action Required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_EVT_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering performance counter with stats infra failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP communities in IOS XR?
### Response:
BGP communities in IOS XR are configured using route-policies to set or match on community values for route manipulation. route-policy COMMUNITY-SET
set community (100:1)
end-policy
router bgp 65000
neighbor 192.0.2.4
route-policy COMMUNITY-SET in
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-3-LTRACE_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace initialization failed. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-AGENT_DEREG_FAILED
### Response:
(Severity: 3), (Category: LICENSE), (Description: Smart Licensing Deregistration failed. This may have caused due to a network connection failure to CSSM. The local registraion info has been removed from the device.), (Recommended Action: Please check the smart agent syslog messages for additional information. Please turn on smart agent debug mode (CLI command: license smart debug enable) and retry for more detailed information. Finally, please check your smart agent Call Home settings, your network connection with CSSM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-7-SEND_EOR_WAIT_EXPIRED
### Response:
(Severity: 7), (Category: ROUTING), (Description: Send EoR wait timer has expired for a subgroup. Now just try to send the EoR.), (Recommended Action: 'Delaying sending of EOR is based on occurance of a particular condition' 'for example, for EVPN route type 2, if 2nd label is not present for any' 'route and that is expected to be present, then EOR is delayed for an evpn' 'subgroup. Check why that situation arose, for evpn route why 2nd label' 'was not availble so long.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ncs540l-1-RESTART_NOT_SUPPORTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message in the DPA module to indicate that a process that doesn't support restart has been restarted (crash, CLI or SMU installation) Process will trigger node reload to recover after collecting required information in the linecard's disk), (Recommended Action: Please collect the core file and DPA traces from linecard's disk Ignore this if process was operationally restarted like process restart command or process restart SMU installation those operations are not supported yet and nothing to debug at this point)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA-3-ERROR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-RACK_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB failed to rack initialization due to the above error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_RETRY_EXCEED
### Response:
(Severity: 4), (Category: L2), (Description: After attempting to resend or query information a number of times, the retry limit has been exceeded and no more attempts will be made. The effect of the message will therefore be lost. The impact will depend on the message which was lost. If the message refers to a global error then the process will exit and be restarted.), (Recommended Action: If the message referred to a global error then check that the process has restarted successfully. If the message referred to a bundle or bundle member then check that the object is still configured and still exists. Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-SYSMGR_BLOCK_UNTIL_PRIMARY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The process block until the go-primary notification is received is failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-BCAST_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFM encountered an message event send error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-MEMORY_RECOVERY_RESTART
### Response:
(Severity: 6), (Category: HA), (Description: The sysmgr process with the indicated name and pid has been restarted in an attempt to recover system memory.), (Recommended Action: The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-5-INTCHG
### Response:
(Severity: 5), (Category: ROUTING), (Description: PIM interface state change message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_NO_BACKUP_LOG
### Response:
(Severity: 4), (Category: SECURITY), (Description: Backup file of SAM log is not present. The action taken is specified in the string), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICCMD-4-LACK_OF_ARG
### Response:
(Severity: 4), (Category: LICENSE), (Description: The parameters that liccmd recive args from parser is lack.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
12IN1-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified Serial 12in1 Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-PREPARE_EGRESS_BUFFHDR_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Failed to prepare egress buffer header for a packet.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-BRM_DELTA_THRSHLD
### Response:
(Severity: 4), (Category: FABRIC), (Description: There might be a fabric disconnect in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-NOMEM
### Response:
(Severity: 4), (Category: OS), (Description: Memory low condition is detected.), (Recommended Action: Please check if there are any possible memory leaks using the following commands: - show memory compare start - Perform the operation - show memory compare end - show memory compare report)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_GROUP
### Response:
(Severity: 3), (Category: OS), (Description: A call to a group services interface failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-WARN_SYSDB_NOTIFY
### Response:
(Severity: 4), (Category: SNMP), (Description: Failed to register for receipt of the given notifications. This could be due to a low memory condition or an internal software error.), (Recommended Action: Restart snmpd process.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKEND-3-INV_REPLY_SIZE
### Response:
(Severity: 3), (Category: SYSDB), (Description: This message indicates an error during applying/updating configuration. Header size of the reply message is not a valid value.), (Recommended Action: System will attempt to recover itself. If error still persists, please contact TAC support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-AIB_LOOKUP_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'AIB Entry not found in the shared memory.' 'This will not effect the process.' 'This operation is optional'), (Recommended Action: 'ISSU manager will use some alternate API' 'If the issue persists ' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-IIH_TOO_MANY_IF_ADDRESSES
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified interface has more addresses than can be fitted into a single TLV (255 bytes). RFC 1195 specifies that each IIH may contain at most one IPv4 Interface Address TLV, i.e. 63 IPv4 addresses. Thus if there are more than 63 IPv4 addresses configured on the interface then only 63 addresses are included in the IIH. If the interface has a primary address it is always included first. The secondary addresses are added in their natural numerical order until there is no more space. If there is an IS on the LAN which does not share a subnet with any of the advertised addresses then it will not be able to form an adjacency with this IS. This problem should not apply to IPv6 as each interface should have a single link local address.), (Recommended Action: Reduce the number of addresses configured on the interface so that they can all fit within a single TLV.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_1_OFLOW_NPU2BR_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-1 NPU to bridge instance-3 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error during improper updation of variables or incorrect return state in MPLS FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-UNKNOWN_ADDRESS_FAMILY
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has encountered an unrecognized address family ID. This is an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-4-CHKPT_GET
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MRIB encountered error while trying to retrieve the checkpointed data.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-GRUB_FATAL_EVENT
### Response:
(Severity: 3), (Category: DRIVER), (Description: GRUB has reported a fatal event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MIN_MAX
### Response:
(Severity: 5), (Category: L2), (Description: This is an informational message reporting that a bundle is operationally down because the configuration for minimum active links and maximum active links conflicts. The number of active links required for the bundle to come up is greater than the number of links permitted to be active in the bundle, and there are at least enough links held in standby state for the bundle to come up if the maximum active link criteria were removed.), (Recommended Action: If this situation is not intended then either reduce the minimum active link threshold or increase the maximum links permitted in the bundle.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_12_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVALIDINPUTFMT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The Number output format specification is not in the number input format specification, so we are writing a number that we probably cannot read back in'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_SYSDB_EDM_REG
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an error to register EDM to admin plane sysdb server. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_LICENSE-6-ENFORCE_GRACE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled in grace period.), (Recommended Action: The customer may consider to purchase licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-AUTHORIZATION_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Admin exec process failed to send AAA authorization record.), (Recommended Action: collect the traceback, show log, show proc, show exec trace from SDR and admin modes. Show run and show user out. And contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-MALLOC
### Response:
(Severity: 3), (Category: L2), (Description: A call to malloc failed. The system was unable to allocate adequate amount to memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The system must be running low on memory. Need to check the processes/applications which are consuming the memory on top.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-RESTART_NOTIFD_FAIL
### Response:
(Severity: 4), (Category: INFRA), (Description: When applying software by restart, it is necessary to restart the notification daemon if there are changes in the install infrastructure, in order for the new changes to be picked up. The install infrastructure was unable to restart the notification daemon, or the notification daemon failed to receive the request. In order to ensure the consistency of the software, the notification daemon should be restarted manually, once the current install operation completes.), (Recommended Action: Manually restart the notifd process, using 'process restart notifd' (specifying the node if not the currently active RP).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_BAG_DECODE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-XGXS_DTE_SYNC_POST_RECOVERY
### Response:
(Severity: 2), (Category: L2), (Description: The PLA MAC xgxs DTE layer went down due to loss of sync or lane alignment.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_OPTICS_SW_IMAGE_CORRUPTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-CORE_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: some core(s) not responding from the Roddick.), (Recommended Action: Collect MA and EA traces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-STATE_CHANGE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to change interface state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SERVER-7-EXTERNAL_API_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Common external API returned an error), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_6_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-3-MK_OPERATION_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Type6 masterkey operation has Failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALIDNXCOPTION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The input is invalid. The calling function and the command are displayed'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN-6-AUTHEN_SUCCESS
### Response:
(Severity: 6), (Category: SECURITY), (Description: This is an info message from debug module of aaa component. This indicates that user has succesfully authenticated.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CARD_VOLTAGE_ALARM_CLEAR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The card voltage sensor has returned to operational range.), (Recommended Action: None required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-ISSU_GO_STANDBY
### Response:
(Severity: 6), (Category: INSTALL), (Description: During ISSU operation node received node role change notification .Node will change to standby.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-SYSDBOPERATION
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unexpected error in sysdb call. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-WARNING_INFO
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv4 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace [common|ipv4] all loc <slot number>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_8P_GE-1-LTRACE_INIT_ERR
### Response:
(Severity: 1), (Category: L2), (Description: Jacket process spawns the SPA process and waits for the initialization to complete. But initialization fails putting SPA into FAILED state. As a part of the above, we find the mesage Ltrace init failed message.), (Recommended Action: If the issue occurs, Check the SPA state. If it is not OK, then collect the following traces 1) show plim jacket all location 2) show hw-module traces infra detailed location 3) show plim ether trace info/error location 4) console logs)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR1_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-1 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-6-MPA_READY
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MPA inserted is ready to use), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-MIB_REQUEST_IGNORED
### Response:
(Severity: 5), (Category: ROUTING), (Description: The MIB request is ignored because the node is not active.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-IN_ISSU_CLIENT_CONNECTION
### Response:
(Severity: 4), (Category: INSTALL), (Description: A new ISSU client has connected to ISSU Manager while an ISSU is in progress. This may have adverse side effects as the client may have missed earlier preparatory milestones.), (Recommended Action: If possible abort and restart the ISSU. Otherwise inspect the ISSU warnings (if there are any) and check you are happy with both, the state of the new client and the state of the box, before commiting the ISSU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV6_EA-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An updation error has occured for IPv6 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-NETLINK_KERNEL_BUFFER_OVERRUN
### Response:
(Severity: 3), (Category: INFRA), (Description: The kernel experienced an allocation error while attempting to send a Netlink message to the process. This could indicate system resource issues.), (Recommended Action: If the system is experiencing memory exhaustion, resolve other issues that may be causing this failure state, then restart the process. If the problem persists, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-NODE_DOWN
### Response:
(Severity: 2), (Category: INFRA), (Description: The IOS-XR install infrastructure detected that a node went down unexpectedly. This node will be held down until the end of the transaction. It may be possible for the operation to continue on the remaining nodes. The user is required to complete the transaction by running <CmdBold>install commit<noCmdBold> if the software is acceptable, or by reloading the router to bring the system up with the software present before the current transaction.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-4-ERR_SYSDB_EVENT
### Response:
(Severity: 4), (Category: SECURITY), (Description: Sysdb subsystem sent a notification after a configuration change. This notification has an configuration change type that is not known to SSH. So, the configuration notification received has not been processed and configuration change applied.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-ERROR_LOST
### Response:
(Severity: 4), (Category: MGBL), (Description: An error was encountered while the Central Configuration Validator (CCV) was attempting to report another error. CCV will attempt to continue with the requested operation, but further errors may be encountered, and requested changes to system state may not be fully enacted.), (Recommended Action: The problem may be caused by system resource limitations. Attempt to address any resource limitations before proceeding. If further problems are seen, try restarting the process using the 'process restart ccv' command. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between a reboot package and a restart package in IOS XR?
### Response:
A reboot package requires a router reload for the changes to take effect, while a restart package allows the activation of the package by restarting only the processes that have changed, without requiring a full router reload.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-6-GSP_NOTIFY
### Response:
(Severity: 6), (Category: OS), (Description: A call to group_set_notify() failed. There could be a problem connecting to underlying gsp server or transport between RP and LCs. If this is seen for a long time, there might be a real issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-PSOC_UPGRADE_STARTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that the Canbus Controller firmware on the specified loation is going to be upgraded with the image at the specified path.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-3-REMARK_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to reclaim FGID's that were allocated to bridge domain.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-LOCK_INIT
### Response:
(Severity: 3), (Category: SYSDB), (Description: The client library has failed to initialize a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-4-ERR_INT
### Response:
(Severity: 4), (Category: L2), (Description: This is an informational message in the Bundle Mgr to indicate that an internal software error was seen), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_MIPC_NOTIF_ACK
### Response:
(Severity: 7), (Category: OS), (Description: It is an internal error which the system failed to acknowledge a MIPC Server notification.), (Recommended Action: When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-KDUMP_DONE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-3-EPM_SWITCH_LINK_EXCESS_ERR_NORELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: a critical link of EPM switch device has excess crc errors), (Recommended Action: The board is not reloaded. At this stage please collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-ENTRY_UPDATE
### Response:
(Severity: 4), (Category: OS), (Description: Error during pre-ifib entry delete or update.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-NODE_MISSING
### Response:
(Severity: 3), (Category: OS), (Description: Node missing from table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-PEER_XPORT_ADDR_CONFLICT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified LDP peer is sending hello messages containing conflicting TCP transport addresses. A common problem is to configure 'discovery transport address interface' as this will advertise a per-interface TCP transport address that may conflict with targeted hellos, or hellos sent on other interfaces.), (Recommended Action: Verify the configuration on the peer device: mpls ldp router-id 192.168.0.2 address-family ipv4 discovery transport-address 192.168.0.2 <--- use this alone ! interface GigabitEthernet0/0/0/0 address-family ipv4 discovery transport-address interface <--- remove this ! ! interface GigabitEthernet0/0/0/2 address-family ipv4 discovery transport-address interface <--- remove this ! !)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE4_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE4_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_STATS
### Response:
(Severity: 3), (Category: L2), (Description: It was not possible for CDP to register for per-interface CDP protocol stats collection. The entries in the 'show interface accounting' command are likely to be inaccurate for CDP packets.), (Recommended Action: Try restarting CDP and the Statistics server process on this node. proc restart cdp location <node> proc restart statsd_server location <node> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-7-EVM_CREATE
### Response:
(Severity: 7), (Category: OS), (Description: The syslog_dev process has failed to create an Event Manager.This can happen when the process is (re)starting. The process recovers by restarting itself.), (Recommended Action: Collect the output of show tech-support, show processes , show memory, debug event-manager attach job <> and show watchdog memory-state from the location the error message comes from. If the error message doesn't persist, it can be ignored. If the error message persists,call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE_UDI-6-NEW_UDI
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A new Unique Device Identifier has been generated for IOS XRv for licensing purposes.), (Recommended Action: There is no action required. Every initial boot of IOS XRv will result in this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_T3E3-6-SPA_RELOAD_INFO
### Response:
(Severity: 6), (Category: L2), (Description: When the cardtype of T3E3 SPA is changed to T3 from E3 or vice versa, it undergoes a reload. A SPA reload is mandatory to have the newly configured cardtype in effect.), (Recommended Action: This is an informational message indicating the T3E3 SPA will undergo a reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-NSR_CONN
### Response:
(Severity: 5), (Category: ROUTING), (Description: The NSR adjacency on one of the NII interface has become UP or Down), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-7-EDM_INIT_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The opening of EDM connections has failed repeatedly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-PULSE_HDLR_CERR
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred in the L2FIB manager process due to a failure to attach a pulse handler to a process.This could have happened due to following reasons: 1) Pulse code could be out of range 2) Insufficient memory), (Recommended Action: Try restarting the process using- process restart l2fib_mgr Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_TIMER_START
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver could not start timer.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-SYSADMIN_VM_WARNING_EVENT
### Response:
(Severity: 4), (Category: DRIVER), (Description: SysAdmin VM has reported a warning event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-4-DST_PREFIX_LEN_REDUCED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The destination prefix length in an ACL has been reduced to the maximum supported length. Matching will only happen based on the maximum supported length.), (Recommended Action: Reduce the destination prefix length in the ACL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_LIB-7-AM_I_SC_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The platform library service call to find the hardware module type has failed. The calling application handles it appropriately.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-v6_DATA_MDT_NO_CORE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Missing data MDT core routes), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TRM-3-HASH_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: hash bucket update failed. The hash infra could be in an inconsistent state. POR may be required), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-5-VIRT_INST
### Response:
(Severity: 5), (Category: OS), (Description: The named virtual service has triggered the log. Please interpret the log in the context of the virtual services.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_OC_HDR_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS from FIA header error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-LTRACE
### Response:
(Severity: 4), (Category: L2), (Description: ELMI encountered an error using the Lightweight Tracing service. The error message describes what operation has failed and why it failed. This is a fatal error and the ELMI process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-RETRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: During normal operation, if FIB cannot fully process an update, it may queue the update to be retried later. An error occurred which prevented the retry. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_12_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-EVM_CRE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospfv3_uv process was unable to create an event connection manager instance.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS_MIB-3-ERR_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Initialization failed), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Enable 'debug snmp isis', restart the process snmpd and cause the isis mib to be loaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-FLEX_ALGO_NO_DEF
### Response:
(Severity: 3), (Category: ROUTING), (Description: Flex-Algo defintion is missing), (Recommended Action: Fix the Flex-Algo definition needs to be advertised by at least one source.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_UPD-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: FPD_UPD Driver Initialization failed. Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-RDDR_FIFO1_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: RxDDR 1875 to 200 FIFO 1 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-EVENT_BOOL_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an unexpected error using one of the infrastructure libraries. This may be due to a low memory condition but is more likely to be a programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-WARNING_STR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace all loc <slot number>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_OPTICS_BAY_PORT_UNSUP
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An optics Module not supported for the port error was detected during module initialization. A optics module not supported for the port error is reported when Optics is not supported on the port. The optics is the pluggable optics on the line cards. Optics initialization may happen when linecard boots up, optics OIR and line card process restart.), (Recommended Action: Verify that the optics Module is supported for the port. Replace the optics with a working one (if any) to isolate bad optics. Check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the command 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-LOSS_OF_SYNC_FIA01
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on interlaken interface on egress mux and fia 0), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-EA_IMDR_PREPARE_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered a policy in a failed state during an iMDR shutdown state.), (Recommended Action: Please resolve the QoS errors before attempting ISSU)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_OPTICS_BAY_COMPLIANCE_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A compliance error was detected during optics module initialization. A compliance error is due to unsupported optics, checksum error, EEPROM CRC error, vendor data error, or decryption error. The optics is the pluggable optics on the line cards. optics initialization may happen when linecard boots up, optics OIR and line card process restart. The optics will not be enabled if an module compliance error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the optics with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-HEALTH_MONITOR_ERROR_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP driver health monitor detected error conditions), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-VCM_VC_STATES
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred sending the VC states to the VC Manager. This could have occurred searching LMI's internal database or in the call to the VCM.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-1-UPGRADE_ALERT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An FPD upgrade has been initiated that requires the given FPD to be upgraded as well.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-FRR_STATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The FRR state of a protected tunnel changed.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The system has run out of memory'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-6-HIST_FILE_INDEX_RECOVER
### Response:
(Severity: 6), (Category: MGBL), (Description: 'Parser cli history file index was bad which is auto recovered.'), (Recommended Action: Informational message no action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-LOCAL_EID_RLOC_INCONSISTENCY
### Response:
(Severity: 4), (Category: IP), (Description: 'All the LISP local EID prefixes for an address family ' 'must be configured with the same set of routing locators. ' 'LISP detected that there are routing locators configured ' 'on some local EID prefixes and not on other local EID ' 'prefixes of the same address family.'), (Recommended Action: 'Issue the <CmdBold>show {ipv4 | ipv6} lisp database' '<noCmdBold> command and look for routing ' 'locators marked as <CmdBold>missing<noCmdBold>. ' 'Configure the missing routing locators for the ' 'remaining local EID prefixes. If a routing locator' 'must not be used for inbound traffic to a local ' 'EID prefix then a priority of 255 can be ' 'specified.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-7-ERR_BAG_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID allocator was unable to register FGID bags. The FGID component and the System should continue to function as normal, with the exception that the 'show' commands for FGID allocator will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_SERVICE_CONN_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver failed to connect to the identified service during the driver initialization. The driver will be non-operational due to this error.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-UNEXPECTED_VALUE
### Response:
(Severity: 7), (Category: SYSDB), (Description: The process has come across an unexpected value for the specified parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT_SHOW-7-STR_SEQ
### Response:
(Severity: 7), (Category: OS), (Description: The show decode helper library breaks up string data for mesasages into single trace buffers and reassembles them. While putting the trace data back together, the sequence received was not the expected next sequence. Any trace using this string may not be printable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_DLL_API_INVALID_PARAM
### Response:
(Severity: 3), (Category: FABRIC), (Description: An invalid parameter is passed to the DLL API. Check the implementation in the process calling this API.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_PROXY-3-ERR_THREAD_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fabric proxy failed to create the needed threads during the initialization. The driver will be non-operational due to this error.), (Recommended Action: The Proxy will recover by restarting. Verify that the fabric proxy process will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set up RSVP signaling for MPLS TE tunnels?
### Response:
To set up RSVP signaling for MPLS TE tunnels, use the 'mpls traffic-eng tunnels' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng tunnels
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-GET_NODE_PRIOTIY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DSC has failed to initialize the node priority.The process will exit and respwan itself.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-ROLLBACK_FAILURE_DURING_MODIFY
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKFILEMIB-3-THREAD_CREATE
### Response:
(Severity: 3), (Category: SNMP), (Description: There are no resources available to create a bulk file processing thread), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TP_ALARM-4-PROT_SWITCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The MPLS-TP tunnel-tp interface has changed the LSP over which it data traffic is carried, possibly due to a fault or administrative action, or to restore traffic to the working-LSP after LSP recovery.), (Recommended Action: If the state change is unexpected, confirm the local configurations as well those LSRs on the path of the LSPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RIB_DOWNLOAD_PATH_LIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: BGP encountered more paths during rib download than the supported limit for a net. The advertisement and installation of the network in the BGP table may be inconsistent with additional-paths/multipaths configuration.), (Recommended Action: Revisit additional-paths/multipath configuration and the total number of paths learnt for a particular network.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-3-I2C_PLUGIN_IDPROM_READ_FAILED
### Response:
(Severity: 3), (Category: LIB), (Description: 'At bootup, Chassis IDPROM read failed '), (Recommended Action: 'Try another reload of the card')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ANR_WHITELIST_NOT_CONFIG
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'The autonomic registeration authority has not been ' 'configured with white list and will allow all devices ' 'to enter its network'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-1-NP_INIT_FAIL_NO_RESET
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Persistent NP initialization failure Indicates a problem with the network processor on the linecard, If the linecard supports ePFM, boot-up process will continue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-BINDING_ERROR
### Response:
(Severity: 3), (Category: HA), (Description: sysdb_bind failed to bind to inventory source.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-4-CAPS_NOT_ALLOWED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The current operation failed because the capsulation is not allowed on this interface.), (Recommended Action: Configure a valid caps on this interface or choose a different interface on which to configure this capsulation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'summary-prefix' command in OSPF?
### Response:
The 'summary-prefix' command is used for route summarization in OSPF. It is configured under the OSPF area configuration mode on the ABR. It allows consolidation of multiple routes into a single advertisement, reducing the size of the routing tables.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_AHS_LOS_LANE1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-NETIOIDB
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that NetIO IDB can't be found by the process that printed this message.), (Recommended Action: Please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-INFO_BODY
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The resource depletion information in the following format: PROCESS_NAME PID COUNT), (Recommended Action: It is an informational message along with packet depletion log message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-5-CARD_REMOVAL
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Given card has been removed from chassis.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-ERR_GET_CARD_TYPE
### Response:
(Severity: 3), (Category: L2), (Description: ASIC scan server has failed to get the card type. This would result in termination of the server process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-1-CACERT_NOT_VALID
### Response:
(Severity: 1), (Category: SECURITY), (Description: The CA certificate was detected as not valid. This could be because the certificate has expired, is not yet active, or the system clock is not synchronised.), (Recommended Action: '*If system clock is not synchronised, correct the clock. If any other reason contact SUPPORT*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_ECD-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ATM_V2-2-DRIVER_CRIT_ERR
### Response:
(Severity: 2), (Category: L2), (Description: ATM SPA OC3/OC12 driver error messages), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISAKMP-2-PARSE_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: An error occured parsing show output data), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-EVENT_CONN_OPEN_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-ERR_SOCKET_BIND_FAIL
### Response:
(Severity: 6), (Category: SECURITY), (Description: None at this time), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-2-SHM_ALLOC
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: SPP or one of its clients was unable to allocate a block in the SPP shared memory window. This indicates that either system resources are low, or that there is an internal problem with SPP or the shared memory infrastructure. It is likely that both ingress and egress packets will be dropped.), (Recommended Action: Wait until any situation which is putting stress on system resources is resolved, and then try the requested action again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What methods are available for backing up and restoring the boot device in IOS XR?
### Response:
IOS XR provides two main methods for backing up and restoring the boot device\n1. Golden Disk: Allows\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_NOT_RELOADING_NODE
### Response:
(Severity: 6), (Category: INSTALL), (Description: As part of ISSU operation, the specified node has encountered the mentioned failure but the node is not being reloaded by the install ISSU infrastructure as the debug flag is set.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-PAK_NETIO_MUTEX_LOCK
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ARP netio error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTSDRVR-3-OTS_PROV_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Provisioning of specified slot has failed), (Recommended Action: The casue for the provisioning failure has to be analyzed. Collect the show tech logs by running 'show tech-support ncs1k detail' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_STATIC-5-ERR_ISSU_LOAD_PHASE_CLEAR
### Response:
(Severity: 5), (Category: ROUTING), (Description: The clear discrepancy command is not permitted while ISSU is in progress), (Recommended Action: Abort the in-progress ISSU or allow it to finish, and then retry the clear command)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show l2vpn xconnect' command in IOS XR?
### Response:
The 'show l2vpn xconnect' command is used to display information about the xconnect instances configured for point-to-point L2VPN services. It shows the xconnect name, the associated interfaces, the pseudowires, and the state of the xconnect (up or down). This command is useful for verifying the point-to-point L2VPN configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDSFS-4-BAD_REPLICA
### Response:
(Severity: 4), (Category: OS), (Description: The current instance of RDSFS encountered an error so that it is no longer a replica.), (Recommended Action: Contact customer support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-6-PROC_OPEN
### Response:
(Severity: 6), (Category: OS), (Description: Procfind was unable to open the specified process, and will therefore return incomplete results.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-RIB_REG_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: This trcaeback indicates that BGP lost connection to RIB and an one attempt to reconnect to RIB failed. This is expected in the following situations 1) Before FO, the standby BGP connects to the active RIB. after FO, the new active BGP has to connect to the new active RIB although it is not restarted. 2) After FO, the new active RIB is restarted due to process placement especially in muli-chassis scenario. 3) RIB restarted either due to an unplanned exit or due to user initiated restart Since BGP doesn't restart, it tries to connect to RIB right away and there is the possibility that the LWM channels may not have been published by RIB yet or RIB is unable to accept the connection due to heavy CPU churn (especially after FO). In all such cases, BGP will continue to try the connection to RIB. One can verify whether the connection has gone through or not checking the RIB clients. The ultimate verification would be to make sure that the RIB tables are in sync with the BGP tables and there is no traffic drop. There is always a very small possibility that this is due to a problem in the connection logic. So if the RIB tables are not in sync with the BGP tables, the traceback decode helps in figuring out the code-path and possible source of any problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISM_PD_LIB_SPA_UNSHUT_ERR
### Response:
(Severity: 3), (Category: INSTALL), (Description: The unshutdown operation to the indicated SPA has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_10_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-RSP_IM_SERCHANNEL_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Tx serdes fault detected/cleared on RSP to IM serchannel), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-4-WARN_BADAUTH
### Response:
(Severity: 4), (Category: IP), (Description: The peer VRRP router has mismatching authentication settings. The authentication string in the VRRP packet did not match the locally configured value. Consequently this peer is ignored.), (Recommended Action: Check the authentication settings on the local device and the peer device(s))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: This error message indicates unable to create ifstackEntry or not able to allocate memory for duplicate interface name. due to a low memory condition.), (Recommended Action: process restart mibd_interface 'Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The CCSQ dll Memory Allocation Error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-4-SYSTEM_RELOAD_STATUS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Shows the system reload status - whether a user initiate system reload is in progress or not.), (Recommended Action: When a rack goes down, this warning message indicates whether the system is undergoing a user intiated reload or not. If is is not a user intiated reload, we have to examine why it has gone down. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-4-RPL_EDIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: A system call failed inside the RPL editor program.), (Recommended Action: Try again: the failure might have been due to resource issues. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_P2MP_SRVR-3-DLL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred while trying to open or initialize a DLL. The process will be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REPLACE_COMMIT_STARTED
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install commit as part of the replace operation has been started.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-TRAP_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Cerficate with invalid attribute.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-GST_SYNC_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: GST Sync error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-4-SENSOR_VALUE_SET_BY_TEST_TOOL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-SATELLITE_CAPS_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: One or more configuration items which have been applied to the given interface on the host are not supported by the corresponding satellite.), (Recommended Action: Remove the configuration from the interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTT4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LNS_EA-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: An error occured in the event loop. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_11_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PFI-3-INFRA_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This error is an internal infra error and when critical is handled accordingly in the code. The context of the error is provided in the actual code where this error is used. Some of the error conditions that are encountered under this is bind failure, attr query failure, set/get failures, etc. If this error is seen persistently initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-ARB_ECTW_RDATA_ACKERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-4-LTRACE_INIT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while initialising the PLU/TLU memory manager This is a non-fatal error for PLU/TLU manager caused by system instability or memory issues), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_VRF-2-MEM_ALLOC
### Response:
(Severity: 2), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition. BGP may not operate correctly until the process is restarted.), (Recommended Action: Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_REQUEST_RELOAD_BOARD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and cause board reload.), (Recommended Action: The output message is warning board reload request. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-2-BIV_PARTPREP_FAILED
### Response:
(Severity: 2), (Category: INFRA), (Description: The install software component has detected that the local installed software base is either corrupted or incorrect relative to the software installed on the rest of the system. This event may be caused by the insertion of a card with the wrong version of software in a live chassis, a failure during install operation, or a power failure interrupting an install operation. However, new disk is not automatically prepared and so manual reimaging of this node is required.), (Recommended Action: This node is has to be reimaged manually using USB / Disaster recovery / Internal PXE Boot method. To get more information on what caused this event, you can run the command 'show tech-support install'. If the problem happens repetitively, it could indicate a hardware problem which prevents proper software installation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-RSI_VRF_NAME
### Response:
(Severity: 3), (Category: OS), (Description: The RSI failed to translate a tbl id to a vrf name.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP nonstop routing?
### Response:
To configure LDP nonstop routing, use the 'nsr' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#nsr
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_LTH_FIFO_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet length FIFO full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-1-ERR_ASIC_GENERIC
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabricq encountered an unexpected error in asic. Software will take appropriate action to log and fix the error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-PATH_ID
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS has tried to use an invalid RIB path-ID for the specified prefix.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAM_MANAGER-3-MALLOC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to allocate memory for inotify event), (Recommended Action: show memory, show media, collect console logs. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-ERR_PROC_READY
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospfv3_uv process was unable to signal process ready to sysmgr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2TP-3-NO_SRCIP
### Response:
(Severity: 3), (Category: L2), (Description: CEF lookup has returned no suitable source IP for L2TP to use), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN pseudowire redundancy?
### Response:
To configure an L2VPN pseudowire redundancy, use the 'redundancy' command within the pseudowire-class configuration mode. pseudowire-class PW-CLASS-NAME
redundancy group 1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_IMDR_V1_PREP_EINVAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: One of the arguments required for the process' signal handler to successfully perform its CCI (cpuctrl) cleanup was invalid. The two pointer values are listed inside of the parenthesis.), (Recommended Action: Linecard reload. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CATAPULT-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CATAPULT Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CDR_CHAN_LOCK_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: Channel failed to acquire CDR lock.This happens due to hardware issues like dry solder.), (Recommended Action: RMA the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR backup bandwidth protection feature?
### Response:
The MPLS TE FRR backup bandwidth protection feature extends the bandwidth protection concept to backup tunnels. It ensures that backup tunnels configured for bandwidth protection have a bandwidth guarantee and do not use bandwidth needed for primary tunnels. This avoids oversubscription on the backup path and ensures that FRR can always redirect traffic successfully.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_2_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-4-DEVCTL_NOT_SUP
### Response:
(Severity: 4), (Category: L2), (Description: The 802.1Q NetIO component received an unexpected message. The message has been ignored. This may indicate that there is a version mismatch among the VLAN components.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-1-SVC_ALERT
### Response:
(Severity: 1), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-7-FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicates a failure in inventory manager. This is an internal debug message. %s - indicates the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-GCS_POLL_MAX_COUNT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Host reached Max number of times it polls GCS without Microcode's response. Microcode failed to program Mac entry submitted by Host.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_SW_IMAGE_CORRUPTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an initialization error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize debug. This condition indicates a problem where the debug init processed by the software is failed. - Failed to initialize ltrace. This condition indicates a problem where the ltrace init processed by the software is failed. - Failed to initialize p2mp frr timer. This condition indicates a problem where the p2mp frr timer init processed by the software is failed.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWEVMERROR
### Response:
(Severity: 3), (Category: OS), (Description: EVM failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-LINK_FAULT
### Response:
(Severity: 3), (Category: DRIVER), (Description: ESD detected link fault.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-DCO_OPTICS_PORTMODE_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: driver detected port-mode apply error for the CFP2 DCO Optics), (Recommended Action: Please ensure that proper dependent configuration, such as FEC mode and port-mode configuration is applied for the CFP2 DCO optics. Collect the output of CLIs 'show running-config' and 'show tech-support ethernet interfaces' and contact your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-BAG_TYPE_FAIL
### Response:
(Severity: 4), (Category: SYSDB), (Description: Bag cannot be decoded since its type has not been registered.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-SITE_REGISTRATION_LIMIT_EXCEEDED
### Response:
(Severity: 4), (Category: IP), (Description: 'Map-server cannot create any more site registrations which ' 'are not explicitly configured. Consequently, at least one ' 'map-register has been dropped.'), (Recommended Action: 'Increase the site registration limit using ' 'site-registration limit <limit> ' 'or limit the number of registrations from ETRs.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to perform a system backup in Cisco IOS XR?
### Response:
To perform a system backup, saving the current system state, use the 'system backup' command in EXEC mode. RP/0/RSP0/CPU0:router#system backup
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-DLL_HANG
### Response:
(Severity: 4), (Category: OS), (Description: Thread to collect DLL info seems to be blocked. Probably DLL mgr is not responding. Dumper will be impacted by this.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-INTERNAL_RECOVERABLE_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A system error was encountered when performing normal, ongoing operations. In rare circumstances, this may result in unexpected behaviour in the L2VPN process or unexpected restart of the l2vpn_mgr process.), (Recommended Action: If unexpected behaviour is seen, the system may be recovered by restarting the l2vpn_mgr process on the affected node. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-6-RESOURCE_EXISTS
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: A caps add or interface create was attempted for a resource that already exists within Interface Manager. This may be seen as a harmless side-effect of a resync or may indicate that the system is in an inconsistent state - expected resources are missing from the Interface Manager database.), (Recommended Action: The duplicate create attempt may be a harmless side-effect of an internal process resync or it may indicate that the system is not in a consistent state and that dependent features are out of sync. If the system is not in a consistent state or the message recurs then seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-CONFIGURATION_VALIDATION_BLOCKED
### Response:
(Severity: 4), (Category: MGBL), (Description: While scanning running configuration, the Central Configuration Validator (CCV) detected some configuration that violated one or more configuration validation constraints. The affected configuration can be inspected using <CmdBold>show configuration commit-blockers<noCmdBold>), (Recommended Action: Run the command <CmdBold>show configuration commit-blockers<noCmdBold> to display the affected configuration items, together with the resulting errors. Attempt to resolve the errors by adjusting configuration as suggested. If you are unable to resolve the errors or believe the errors are invalid, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-3-INIT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization, causing RCMD process to restart.), (Recommended Action: Contact Technical Support. No impact on routing functionality, but if happens repeatedly then RCMD feature will not work. Temporary workaround would be remove RCMD configuration from the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-MGMNT_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during management thread initialization, causing the process to terminate. Check the details of the error message for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-RECOMMENDED_ATOMIC_OP_COUNT_EXCEEDED
### Response:
(Severity: 6), (Category: INFRA), (Description: A large number of atomic operations have taken place without an install commit operation. If this limit is exceeded then install reporting, in particular via <CmdBold>show install log<noCmdBold> and <CmdBold>show install history<noCmdBold> commands, may become slow. It is recommended to complete the transaction by performing <CmdBold>install commit<noCmdBold> at your earliest convenience.), (Recommended Action: Execute the <CmdBold>install commit<noCmdBold> command at your earliest convenience.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_14_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-4-UNKNOWN_INTFTYPE
### Response:
(Severity: 4), (Category: L2), (Description: The system sent a messages which wasn't expected. It will be ignored.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-2-ASIC_RESET_FAILED
### Response:
(Severity: 2), (Category: FABRIC), (Description: Ingressq ASIC is reset before the MSC is powered down. If this reset fails, the fabric ASICs might complain of barrier errors. These errors should be transient, and the system will recover from it. In case, the errors aren't transient, please contact TAC support), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IPSEC_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to initialize the OSPFv3 IPSec subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the additional following commands: - show tech-support routing ospfv3 detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-2-THRD_POOL_CREATE_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Eth Server thread pool create failed , responsible for handling lwm messages. Eth Server process will be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-6-MPA_AUTO_RECOVERY_MAX_RETRY
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MPA auto recovery max retry limit is hit, moved to DISABLED state.), (Recommended Action: Collect show tech-support mpa-mgr and keep this MPA card in observation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-3-CERR_REG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during the registration of OSPFv3 error codes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-CALL_DLL_UNINIT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: Part of the VPDN CALL infra has failed to uninitialize and may contribute to leaked resources. In some cases, this warning message may be harmless.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-L3LC_NOT_POWERED_ON
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A MSC-140G/FP-140G card only be powered on if there are no legacy fabric cards (FC-40G) in the router.), (Recommended Action: Replace all the legacy fabric cards (FC-40G) with FC-140G fabric cards.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_3_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-LIST_ADD_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-4-XR_PART_PREP_IMG
### Response:
(Severity: 4), (Category: INFRA), (Description: SDR Mgr has requested for SDR partition. Install did not find any partition with matching software. New partition is created and image baking in progress. User has to wait until SDR/XR is spawned. Reloading of card has to be avoided till SDR comes up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_SAMSUNG_MEMORY_REPAIR_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the SBUS Driver to indicate that a HARD memory repair operation has failed on the specified HBM memory.), (Recommended Action: The line card needs to be returned for repair.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-SLOW_TRACKING_RATE_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The configured Slow-Tracking rate is not supported by the platform, Supported Slow-Tracking rate are as given in the msg.), (Recommended Action: Unconfigure current Slow-Tracking rate and provide one of the value from the message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-4-CERR_REG
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Error in registering with CERR handler.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LS_LFI_PWM_BIT_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a pwm bit error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALPHA_DISPLAY-6-CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Message to indicate that alpha-display was updated with new string or state.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-INVALID_POST_RUN_REQ
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that an unexpected post run request is present and shelfmgr will ignore this request.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-DISCOVERY_COMPLETED
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP has successfully received DHCP Response with config file present. ZTP will proceed with fetching workflow.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2LIB-7-MUTEX_TEST_LOCK
### Response:
(Severity: 7), (Category: MEDIA), (Description: A mutex which should have been locked was tested and found unlocked), (Recommended Action: Contact customer support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-OOR_RESOURCE_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a warning message in the OFA FIB to indicate the usage of the named resource has exceeded the maximum allowed.), (Recommended Action: Please collect the console log, show tech-support cef platform. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-3-VM_ACTIVATE_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: VM activate/deactivate failure description.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-7-GEN_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDR-3-FIRMWARE_NOT_READY
### Response:
(Severity: 3), (Category: DRIVER), (Description: CDR init failed for that specified slot/cdr'), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RVM_MGR-3-CONSTRUCT_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error in rvm mgr construction failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge domain local switching?
### Response:
To configure local switching for an L2VPN bridge domain, use the 'local-switching' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
local-switching
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CARD_POWER_ON_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power on operation on the indicated card has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure disk mirroring on Cisco IOS XR?
### Response:
Disk mirroring replicates critical data to a secondary storage device. Use the 'mirror' command in global configuration mode to enable disk mirroring. RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)#mirror
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-VRF_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process attempts to set up connection with the RSI agent during the startup of l2snoop process.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_AGENT_USAGE
### Response:
(Severity: 3), (Category: OS), (Description: Incorrect command line arguments were given to the module), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_MGT_CV_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 MGT code violation on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_DELETE_CA_CERTIFICATE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Retry the operation. If this message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-MAC_TX_FIFO_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected MAC TX FIFO overflow), (Recommended Action: Please try to correct the problem by reloading the board using command 'admin reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_MCAST-6-OLE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM MCAST, Information), (Recommended Action: Ensure the same multicast group is not subscribed to over the mentioned interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key characteristics of the Lightweight Messaging (LWM) IPC?
### Response:
LWM is a connection-oriented synchronous IPC mechanism built on the microkernel message passing services. Key characteristics include\n- Synchronous request/reply semantics\n- Supports both intra-node and inter-node transparently via Qnet\n- Sender blocks until receiver processes the message and replies\n- Prevents receiver overrun but has higher latency than asynchronous IPC\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-2-CRITICAL
### Response:
(Severity: 2), (Category: OS), (Description: Critical conditions), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-DBOPEN
### Response:
(Severity: 3), (Category: IP), (Description: Fail to open a DHCPv6 binding database file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTSDRVR-3-OTS_EQPT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: optical module in the specified slot does not work), (Recommended Action: The casue for the equipment failure has to be analyzed. Collect the show tech logs by running 'show tech-support ncs1k detail' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB_MAIN-3-EXTRACT_NODE_ID_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to extract info from node id in process fsdb_fadb), (Recommended Action: Search the event logs for events/errors related to the failure reason. Node ID management is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) and the output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIER-3-PCIE_LINK_BANDWIDTH_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCIE root/bridge port detecting negotiated bandwidth(BW) is not matching with the expected BW), (Recommended Action: SW will try to retrain the link with expected BW parameters. If it doesn't succeed then it will try for max 3 times. After which it will continue to operate at the negotiated BW and log the event by PFM message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XRD-2-EVALUATION_END
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The evaluation period has ended, any further configuration changes are blocked.), (Recommended Action: Purchase a license and start a new XRd instance to continue to use XRd)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_STCF_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-NSF_START
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTS2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT_HDR_EXT_FIFO_OFLOW_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt hdr ext fifo overflow on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-CCTL_ARCTIC_SYSDB_REG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Creating/opening ECM connection and to SysDB for registering notification on this connection failed as mentioned in the mesage.It will retry to register again. This is not system impacting, the system will continue to work.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install verify packages command in IOS XR?
### Response:
The 'install verify packages' command is used to verify the consistency and integrity of the currently active software packages on the router. It checks for any missing or corrupted files and reports any issues found.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-NEW_NODES_REGENERATE_CACHE
### Response:
(Severity: 6), (Category: INFRA), (Description: Since fingerprint cache generation was started, the install process on some nodes has been restarted, or new nodes have joined the system. Generation will be rescheduled after a 5 minute timer. Available results will be written to the run time fingerprint cache.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-APPS_IMAGE_ERROR
### Response:
(Severity: 5), (Category: L2), (Description: Failed to download the SPA Application image.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-6-NON_DRP_NODE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: DRP_PAIRING process will output this informational message during drp pairing configuration commit time only if one or both of the node(s) used to form the drp pair is not a DRP node. Please note that if the node is not in IOX-RUN state, it's node type will not be determined.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-5-DIA_PEER_UP
### Response:
(Severity: 5), (Category: SECURITY), (Description: Error encountered while using the System Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-SM_INTER_DCM_MISMATCH
### Response:
(Severity: 3), (Category: DRIVER), (Description: ESD detected inter DCM optics does not match with inter DCM ports in SM cluster layout.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-NODE_DELETE_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-OOM
### Response:
(Severity: 4), (Category: L2), (Description: The STP IO process failed to allocate sufficient memory for one of its operations. In order to recover from this situation, the process is restarting and will resync state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_CLIENT_LOGOUT
### Response:
(Severity: 6), (Category: SECURITY), (Description: SSH client terminated session.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-SYSDB_ITEM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The reason should be supplied in the IOS msg itself, but basically this msg means that shelfmgr unable to set the default parameters in sysDB.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-TEST_ISSU_RUN_SWITCHOVER_SLEEP
### Response:
(Severity: 6), (Category: INSTALL), (Description: Informs the user how many seconds the dLRSC is sleeping before switching over during a 'test ISSU-run' operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPP_EXMEM-6-THRESHOLD_DECLARE
### Response:
(Severity: 6), (Category: L2), (Description: Exmem resource cross over its threshold), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-CPM_BIND_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to failure to register callbacks for satellite sensor updates. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-5-ADJCHG
### Response:
(Severity: 5), (Category: ROUTING), (Description: An OSPFv3 neighbor has changed state. The message describes the change and the reason for it. This message appears only if the <Bold>log-adjacency-changes<NoBold> command is configured for the OSPFv3 process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PROVISION_IN_PROGRESS
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when provision of the disk is ongoing), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-INIT_NOTIFY_ID
### Response:
(Severity: 3), (Category: L2), (Description: A CPP driver failed to notify INIT failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-2-SVC_CRIT
### Response:
(Severity: 2), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ASIC_RESET_INVALID_ST
### Response:
(Severity: 3), (Category: FABRIC), (Description: Error occured during fabric driver asic status change. Its equivalent to sending OPER_DOWN for an asic and each of its link ports.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-PD_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: When FIB processes forwarding updates, it may have to program the underlying platform hardware. The software controlling the platform hardware encountered the error shown during this programming. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-KEY_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: CEPKI crypto error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_DIP2_ERR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control DIP2 parity error on NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-ERR_CHKPT_SAVE
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while checkpointing data for the indicated interface. Operational data may have been lost resulting in an STP process restart being more impactful.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KD-3-FILE_OPEN_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the file open failed on storage device.), (Recommended Action: Go to admin mode on RP console and issue following command:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-MALLOC_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-UCAST
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified unicast filter operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-INT_UNRESOLVED
### Response:
(Severity: 6), (Category: MGBL), (Description: This is message is an informational message indicating some of the interface configuration was moved to pre configuration automatically as these interfaces could not be mapped to any cards.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-TIMER_QUEUE_FULL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the shelfmgr's timerQ - keeping pool of free nodes to start new timer, is now empty. No more nodes available to start any new timer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_STATE_MACHINE_FROZEN
### Response:
(Severity: 6), (Category: INSTALL), (Description: When initiating the ISSU operation, the user specified that the install infrastructure should freeze the ISSU state machine in every state before transitioning to the next state. The operation will not continue until the user either indicates that install unfreeze the state machine using the supplied command (run ismdbg -T) or clear the freeze of the state machine using the supplied command (run ismdbg -C).), (Recommended Action: Unfreeze the ISSU state machine using run ismdbg -T or clear the freezing using run ismdbg -C.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-1-INIT_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an informational message in the OFA FIB to indicate that an error was seen during init operation. A return code is returned to PI which can do a retry or exit based on if error persists.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Serial-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified Serial Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ether_spa_dwdm-3-DWDM_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: SPA driver has detected an error in the DWDM init routine.), (Recommended Action: The SPA driver has detected problem with DWDM init routine. If the ports on the SPA are not operating as expected, power down and reseat the indicated SPA card. If the error messages persists, copy the error message exactly as it appears. Next research and attempt to resolve the issue using the SPA hardware troubleshooting documentation as well as the tools and utilities provided at http://www.cisco.com/public/support/tac/tools.shtml. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl or contact your Cisco technical support representative. Be sure to provide the the information you have gathered and a 'show tech-support' to your support representative, or attach it to your case in non-zipped, plain text format (.txt).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-MESSAGE_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Message sending failed between envmon component and Envmon Event Detector of the Embedded Event Manager.), (Recommended Action: Give CLI: If it is still getting operational failure, perform RSP switchover or card reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP for MPLS TE fast reroute?
### Response:
To configure RSVP for MPLS TE fast reroute, use the 'mpls traffic-eng fast-reroute' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng fast-reroute
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUB_UTIL-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: SUBSCRIBER), (Description: This syslog is printed when RwString Manager or its clients fail to initialize necessary data structures and memories. If the error originates from the system call the error message is also printed. The process cannot proceed without this module initialization.), (Recommended Action: The sysmgr will retry to start the process. If it cannot be restarted it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL-3-CONFIG_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: RPL configuration through api failed.), (Recommended Action: Try clearing autonomic device using the 'clear autonomic device' cli. If problem persists contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-FALLBACK_PSK_MKPDU_VALIDATE_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Received MKPDU identified by the given CA(CKN) & RxSCI, failed one or more of the following validation checks, - MKPDU packet length (invalid / min length / not a multiple of 4 octets), - Correct paramset order & existence of MKA payloads, - Supported Algorithm Agility, - Duplicate MI verification if peers exist, - Duplicate SCI verification if peers exist.), (Recommended Action: contact cisco-support by sharing the tech-support macsec.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering path option feature?
### Response:
The MPLS traffic engineering path option feature allows the path for an MPLS TE tunnel to be specified. The path can be dynamically calculated or explicitly specified. Dynamic paths can be based on a cost metric or TE metric. It is configured with the tunnel mpls traffic-eng path-option command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-ACCOUNTING_RECORD_DROPPED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Due to an unexpected internal error, the IGMP accounting subsystem was not able to add a record to acccount for join/leave related events. The logs may therefore be incomplete and missing some entries.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace accounting error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace accounting error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-3-PCIE_NOT_READY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For HFR number of platform mount retries is 50.Before performing the usb bus scan verify if pcie is ready. This error message will get printed when umass check pcei API is timed out after maximum retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-PEER_DUP_ADDRS
### Response:
(Severity: 4), (Category: ROUTING), (Description: LDP peer address database has some duplicate addresses which are received from (and hence bound to) more than one peer. The presence of one or more duplicate address confuses LDP control plane and may lead to potential traffic blackholing due to unlabelled forwarding path setup for paths using this address as the nexthop IP address.), (Recommended Action: Find all peers duplicate addresses present in the network by running 'show mpls ldp neighbor detail' command, and then fix the misconfiguration in the network.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-4-XR_PART_PREP_RESP
### Response:
(Severity: 4), (Category: INFRA), (Description: SDR/XR partition preparation completed successfully and returned to SDR Mgr for spawning.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-CFG_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured when applying a configuration change. PVSTAG may not operate correctly for the instance described in the message.), (Recommended Action: Unconfigure the affected configuration, commit the change, then reapply the configuration. If a failure is still seen, it may be possible to resolve it by restarting the pvstag-io process on the affected line card using the 'process restart pvstag-io location ...' command. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-I2C_FAILURE_PM_LED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An I2C failure occurred while trying to set or clear the LEDs of a Power Module in a power shelf.), (Recommended Action: Try doing restarts of below process admin process restart envmon loc <>. admin process restart i2c_server loc <>. Location is from the node on which this ios_msg is seen. If the issue still persists collect required_info)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-COPY
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the object to copy does not exist. The details are in the error string.), (Recommended Action: Check that the object to copy exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-ERROR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error Message received from CBC. This may be a serious failure (example: PCI Link Down), however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Provide the following CLI: (admin)# show env Use the pid from canb-server output to look for matching pid in the pfm output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT0_CHAIN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP chain error on the HT0 interface. This is logged when the HT interface received a sync flood or when HyTop drives a sync flood.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_NETIO-3-DEBUG_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: PIM Netio dll failed initialization or registration with the debugging subsystem. This resulted in the restart of NetIO process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-3-BAG_REGISTRATION
### Response:
(Severity: 3), (Category: HA), (Description: LRd was unable to register bag structures.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-PIO_CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A critical error occurred while accessing the hardware in jacket driver which involves exiting the process. The driver will restart and attempt normal functionality. If the error is transient, the jacket driver and the SPAs will continue normal operation. If the error is persistent, the jacket card hardware needs to be checked out for access failures.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'distance' command in OSPF?
### Response:
The 'distance' command is used to set the administrative distance of OSPF routes. Administrative distance is used to rank routes from different sources. Routes with lower administrative distance are preferred. By default, OSPF has an administrative distance of 110 for intra-area, 110 for inter-area, and 110 for external routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-CLINFO_GET_DATUM
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to retrieve an application datum associated with the given channel handler.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_PKT_MAXLEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: MGBL), (Description: MDACon was unable to allocate enough memory required to process the command), (Recommended Action: Memory on the box must be running low - are there services that can be stopped, or can more memory be added.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_INFRA-3-ltrace_failed
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ltrace failed), (Recommended Action: Please contact tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-6-HB_PATH_DOWN
### Response:
(Severity: 6), (Category: IP), (Description: The heartbeat path between the LMA and the MAG (corresponding to the CoA address or IMSI from the error message) is broken.), (Recommended Action: Ping the MAG IPv4 or IPv6 address as seen in the error message to ensure that the path is indeed broken. If Ping succeeds, then do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-IF_INVALID_LS_LAYER
### Response:
(Severity: 3), (Category: L2), (Description: Unable to assign interface because logical switch is not layer3 type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-MGR_CHUNK_ALLOC
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The VPDN MGR process has failed to allocate memory. This may be due to low memory conditions on this particular RP, or VPDN Manager may be user more memory than it is allowed.), (Recommended Action: Reduce system scale.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDSFS-7-DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: RDSFS failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-6-ERROR_DISABLE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The interface is being error disabled. This has occurred due to the reason given in the log.), (Recommended Action: This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-CARD_RESET_NOT_ALLOWED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detects an invalid Reset action defined in the Application Fault Condition Database. An fault of severity Error is not allowed to perform a card reset recovery action.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-4-ERR_FGID_DOWNLOAD
### Response:
(Severity: 4), (Category: FABRIC), (Description: The message is seen when initial FGID download from the FGID server to SFE driver does not get completed. Generally this indicates a transient EES transport issue. The SFE driver will try to recover from this error by resetting the EES connection to FGID server.), (Recommended Action: There is no specific manual intervention needed to be taken by the customer for this message. As mentioned in the explanation, SFE driver will try to recover from this situation on its own. However, if this message is being seen often, then please capture the output of the CLIs mentioned in the required_info, and contact Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-NODE_RELOAD_PENDING
### Response:
(Severity: 6), (Category: FABRIC), (Description: A node reload request to envmon is pending. If the node is not reloaded by envmon platform fault manager will be requested to bring the node down in in the time specified), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-FINDPDB
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred on a request to find the handle for the specified type of routes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SERVER-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-FLEX_ALGO_DEF_CHANGED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Flex-Algo defintion changed based on the advertisement coming from the source.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-GET_PROC_ROLE
### Response:
(Severity: 3), (Category: OS), (Description: Failed to get the node state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-BAD_RDSTYPE
### Response:
(Severity: 7), (Category: OS), (Description: replica ID used to invoke the RDS API is wrong.), (Recommended Action: This is a debug message.No Action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TEMP_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX encountered over-temperature error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INTF_NAME_PARSE_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'interfaces during nvgen are ordered based on logical intf or slot/' '/port/sub-intf. This ordering failed due to the mentioned reason'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TASKID_EXCEEDED
### Response:
(Severity: 3), (Category: MGBL), (Description: Number of taskid found in .parser exceeded the maximum limit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_1_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-DPA_MODULE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a message in FIB platform to indicate that engine layer identified an error while programming an object in DPA.), (Recommended Action: Please collect the console log, show tech-support cef platform. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACLEARN-3-DBG_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to intialize maclearn debug infra.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'sysdb item delete operation failed. The error is displyed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different ways to clear BGP sessions?
### Response:
BGP sessions can be cleared in the following ways\n- Hard reset - Tears down the TCP session and re-establishes it. Disruptive.\n- Soft reconfiguration inbound - Performs a route refresh to get routes from the neighbor again. Requires storing a copy of received routes.\n- Route refresh - Performs a route refresh to get routes from the neighbor again. Requires route refresh capability.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB EA, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_STATIC-7-ERR_INIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: Initialization of the MPLS Static process failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-CONDWAITFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The packet subsystem failed to perform a conditional wait. This usually indicates a programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_SYSDB_EDM_DATALIST
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver has failed to either create / add a external data manager datalist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: An internal system warning occurred.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT-0-ALM_EMERG
### Response:
(Severity: 0), (Category: SERVICES), (Description: The monitored flow has traffic issues as indicated by the react trigger. The problem is introduced either at some upstream router or even at the traffic source itself. Alternatively, a configuration mismatch between the traffic source and this router (for the flow data rates etc) can cause this error.), (Recommended Action: Check to see if traffic source is indeed sending traffic. Check that the traffic characteristics defined at the source match that on the monitoring router. Trace the traffic flow upstream to the source and verify flow-mon statistics at each applicable hop. Check for packet drops for the flow at intermediate hops - between source and the monitoring router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_PM_OIR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when any PM is OIR'ed from satellite.), (Recommended Action: Please reinsert the PM back in the satellite.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAN_SYNC_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 chan sync error on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZENJF-4-BACKUP_NIRVANA_PROM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Nirvana FPGA is booted from backup PROM), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-MUNMAP_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Ltrace initialization failed. It shouldn't hamper the functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_FC_DIP2_ERR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control DIP2 parity error on NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-UNSUPP_RX_CH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Rx POD detects an unknown error on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption from received cells. There can also be a software bug such that the error is not handled), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-6-FILE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message from the fpd library. An error was encountered while getting descriptor file path. It will skip current fpd descriptor, but continue to upgrade using other available fpd descriptors.), (Recommended Action: Info message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAOC768-3-SW_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: PLAOC768 Driver encountered an internal software error condition which involves exiting the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-ERR_PFP_BLOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: LSD received a request for a PFP block that has conflicting labels present. Configured PFP Block cannot be allocated.), (Recommended Action: Reload the router and make sure you don't have overlapping label(s).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-6-SYSDB_TIMEOUT_SET
### Response:
(Severity: 6), (Category: MGBL), (Description: Couldn't extend timeout value for 'vty-pool' config.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>*param*<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>*param*<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. *SUPPORT* *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This may be a serious failure, however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Provide the following debug: (admin)# show canb server-stats loc all (admin)# show canb trace loc <target nodeid> (admin)# debug canb server error loc <target nodeid> Let the debug run for 2 minutes (admin)# undebug canb server error loc <target nodeid> (admin)# show canb server-stats loc all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
B_SHIM_PARTNER-3-ECM_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: 'There is a software error when creating ECM connection between SPA and b-shim'), (Recommended Action: Perform below steps and see if error goes away: 1) SPA process restart by executing CLI: 'process restart <spa_process_id> location <> 2) SPA reload by executing CLI: 'hw-module subslot <> reload')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPABRG-6-HW_INFO2
### Response:
(Severity: 6), (Category: L2), (Description: Marmot spabrg driver informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-MISSINGBRACKET
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The '<' is missing in sysdb string. The sysdb string and the command are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-6-CONFIG_ERROR_SET
### Response:
(Severity: 6), (Category: INFRA), (Description: SLA Profile Manager found configuration for a profile that was previously valid but has since become invalid. This will most likely be the result of the profile's packet type changing its capabilities resulting in invalid configuration. This invalid configuration will not be applied to the profile and a configuration error will be present against the profile.), (Recommended Action: Reconfigure the profile to remove or change the invalid configuration such that it becomes valid.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-LINK_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error occurred while attempting to join together the two halves of some SESVI pairs on the specified node. The pairs will not come up. If there is a standby node configured for the pairs, they may come up on the standby.), (Recommended Action: It may help to shut down, then bring up, the SESVI interface pairs in question.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_STARTTRANS
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the timeout time was not correctly entered. The details are in the error string.), (Recommended Action: Check that the format of the timeout time is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_0_FIA_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error from FIA for NPU-0 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-3-FPGA_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FPGA had errors repeatedly and it occured many times in limited amount of time. This maybe non fatal ECC errors.), (Recommended Action: The software is not able to recover from this error automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_CORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE correctable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-BADOPTION
### Response:
(Severity: 7), (Category: MGBL), (Description: The command option is invalid), (Recommended Action: Re-enter the command. (Use the help command to find valid options.) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_LIB-3-BATCH_BUFFER_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error in batch buffer operaton invoked from client.), (Recommended Action: Restarting the client process from which the errow was emitted may fix the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_2_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-ISSU_READY_STATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The listed state refers to the state of ISSU, which is either 'ready', \ 'ready with NSR', or 'not ready'.), (Recommended Action: None. This is a solicited message (by \ 'logging events sync-updates' . User may verify the ISSU sync \ status as shown in the output of \ 'show rsvp issu status detail'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ce_iso-2-FAULTCE_DISABLEPORT2_15
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fault detected while disabling the port because of the failure of disabling functionality. Isolating RP node from the CE network is failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-OUT_MEM_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an output memory error on link 3), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE3_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE3_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-DEVICE_CORRUPT
### Response:
(Severity: 4), (Category: MEDIA), (Description: The media storage card specified was corrupted beyond repair. See log file for specific reason.), (Recommended Action: Format media device manually, if still fails, replace media device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: SAM general warning message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL2-7-MSG_DECODE_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: A call to decode a BCDL TLV failed. This could lead to a lost control message.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_EA-3-SSC_SEND
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a batch of messages to the Service Director. The Service Director may not be up to date with the state of services on this node, so SBCSVI interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the SBCSVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL_SHM-3-ERR_RESOURCE
### Response:
(Severity: 3), (Category: OS), (Description: Some error occurred in operations related to resource allocation. The text of the message displays the failed operation and the related error code. The system will try to re-aquire the resource.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-LOCKORDER_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code. A lock was taken in an invalid sequence.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-FALLBACK_MACSEC_PPK
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-DEVICE_INACTIVE
### Response:
(Severity: 7), (Category: OS), (Description: The device on the node is not active.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT2_FIFO_OFLOW_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt2 fifo overflow on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-3-LABEL_BLKS_DROPPED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A synchronous label block operation request received when server initialized in asynchronous mode or vice versa; or when server is not ready.), (Recommended Action: Controller and/or agent must ensure that label block operation requests are sent only in the mode specified by the client initialization message and server is ready. If message is still seen after meeting these conditions, contact Cisco for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-7-FILE_OPERATION
### Response:
(Severity: 7), (Category: OS), (Description: An error happened in a file operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-SYSDB_CFG_REGISTER_NOTIF_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that config notification registration with SysDB has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-NFM_INT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node encountered an error due to internal software issue and is able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_LAYER-6-VRF_REG
### Response:
(Severity: 6), (Category: ROUTING), (Description: A VRF registration operation failed. This could be a temporary error if its associated with a RIB process restart.), (Recommended Action: If RIB process is healthy and did not undergo a restart, contact Cisco for support. If it went through a restart, the registration operation would be retried and system should recover. If VRF is still not registered with RIB post RIB restart, contact Cisco for support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_APS-6-RANGE_THRESHOLD_XCED
### Response:
(Severity: 6), (Category: IP), (Description: The number of ranges configured for the addresses in pools is too large. Having more addresses in a single range and thereby having smaller number of ranges is optimal for memory. An informational message will be generated if At 1 Thousand Ranges there are < 10 Addr per range At 10 Thousand Ranges there are < 50 Addr per range At 50 Thousand Ranges there are < 100 Addr per range At 70 Thousand Ranges there are < 150 Addr per range), (Recommended Action: Consider combining multiple ranges into one.If that does not work contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NSR_PACKET-2-CANT_READ_MAGIC
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message tells is there was an error in reading the magic number.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-FAILURE2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a failure message in the ASR9K platform specific code software to indicate anomolies that are not serious failure. This failure is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect console log, traces * SH_CMD show af-ea ipv6 trace errors loc <slot number> * Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_SAVE
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_save failed while updating an object in a particular table.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This may be a serious failure, however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Provide the following debug: (admin)# show canb server-stats loc all (admin)# show canb trace loc <target nodeid> (admin)# debug canb server error loc <target nodeid> Let the debug run for 2 minutes (admin)# undebug canb server error loc <target nodeid> (admin)# show canb server-stats loc all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ether_spa_intr-6-BURST_EVENT
### Response:
(Severity: 6), (Category: L2), (Description: A burst of interrupts have occurred and the interrupt manager has throttled the interrupt. It will be re-enabled automatically after the pause timer expires and no further intervention is required.), (Recommended Action: If the problem is persistent, check the fiber for faults. Try cleaning the fiber and inserting it back. Please collect the below information and contact TAC: 1. Was there any configuration change on this interface or its peer. 2. Is there any other known trigger to this? 3. Collect the outputs for the below CLIs: a) 'show inventory' b) 'show controllers <physical-interface>' c) 'show logging' d) Topology information 4. What is the type of fiber used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OIRD-7-UNEXPECTED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBHELPER-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-4-CONFIGURATION_CHECK
### Response:
(Severity: 4), (Category: IP), (Description: The configuration inconsistencies is detected for the indicated configuration.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-5-LOCATOR_CONFIG_MODE_CLR
### Response:
(Severity: 5), (Category: ROUTING), (Description: This notice is issued whenever the SRv6 config mode transitions from SRv6 or SRv6 micro-segment to none. This indicates the configuration mode is open and will be set upon next locator's prefix or micro-segment configuration accoridngly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_SYSDB_DATALIST_NEXT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-TTY_NMSPC_PATH
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to get the sysDB path of an item from TTY nmspc library'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-HW_SINGLE_ECC_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: NP detects single ECC ERROR and reported through interrupts), (Recommended Action: Transient alarm. HW has already corrected the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-API_NULL_PARAMETER
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP_POLICY-3-ORA_ORABUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-STBY_CAPABLE
### Response:
(Severity: 7), (Category: HA), (Description: The call to sysmgr_is_standby_capable failed. This may be due to the application not having a startup file, and so being unknown to sysmgr.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-4-AO_PEER_KEYCHAIN_CONFIG_CHANGE
### Response:
(Severity: 4), (Category: IP), (Description: It is NOT recommended to make a configuration change for established session. TCP-AO will take this change and start using it. Based on the nature of the change this might result into flap of the sessions which are using this currently.), (Recommended Action: Please check if the configuration change done is correct and inline with peer configuration. If not, please correct it immediately.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_CONNECT
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred when TelnetD requested a VTY for a session. This might occur if the requested telnet session cannot be satisfied by any of the unused VTYs in the configured vty pool(s), e.g. if all VTYs are in use, if transport-input is not allowed for telnet, or if the configured ACL does not match.), (Recommended Action: Check that the configured VTY pool(s) can satisfy this telnet request based on which VTYs are currently in use. This can be checked with 'show users', and looking at the VTY pool configuration. If the configuration appears to be consistent then try to telnet with debug telnet detailed on; this might indicate where the problem lies.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_CHAN_SYNC_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 chan sync error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SAM_INV_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SAM inventory operation error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-5-MSG_CKSUM_HDR_ERROR
### Response:
(Severity: 5), (Category: OS), (Description: The message received by an application had a wrong cksum value. The message data could be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_BASE_NETIO-5-INCORRECT_SAVE_DATA_LEN
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: FINT DLL saves data across DLL upgrades. It expects the length of saved data to be same before and after upgrade, else it would cause netio to take default action (to restart) for upgrade to take effect.), (Recommended Action: This message indicates that netio will take default action to restart as fwd netio dll does not support dll upgrade with different saved data length. No further action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-RESERVE_HA_MISMATCH
### Response:
(Severity: 6), (Category: LICENSE), (Description: None.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-2-THREAD_UNLOCK_FAILURE
### Response:
(Severity: 2), (Category: OS), (Description: An effort to unlock database failed. The function which tried to unlock is given in the message. The database might not reflect the expected behavior.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_DATA_FIFO_OFLOW_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg data fifo overflow on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-7-INIT_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-5-MSTP_CONFIG_CONFLICT
### Response:
(Severity: 5), (Category: L2), (Description: Configuration conflicts for STP protocols are not detectable by l2vpn at configuration time. Recently added configuration is now in conflict with existing configuration.), (Recommended Action: Remove the recently added configuration that is listed by the second protocol, then remove the existing configuration listed by the first protocol, and finally re-add the second protocol configuration in order to change the port protection protocol.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPv4-6-INFO
### Response:
(Severity: 6), (Category: IP), (Description: There was an internal failure that may impact non-essential system function), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-FSM_SOCKOPTS
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: VPDN MGR failed process internal messages. This may be due to low memory conditions.), (Recommended Action: Allow the subscriber to reconnect. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_ACC_IF_SES_THRESHLD_NO_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on the access interface is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-DEBUGREG
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Debug registration failed for the reason listed in the message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-4-WARN_BADVIP
### Response:
(Severity: 4), (Category: IP), (Description: The peer HSRP router has mismatching virtual IP address settings. The virtual IP address in the HSRP packet did not match the locally configured value. Consequently this peer is ignored. This may result in duplicate traffic forwarding due to the presence of 2 Active devices with the same virtual MAC addresses but different virtual IP addresses.), (Recommended Action: Check the virtual IP address configuration on the local device and the peer device(s))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-6-ERR_GENRAL
### Response:
(Severity: 6), (Category: IP), (Description: The rlogin encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_OUTR_VLAN_SES_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Outer VLAN on the given access interface has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-4-CONFIG_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: 'reconfigure'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show config failed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show config failed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Consult the configuration documentation for appropriate commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_2_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-EMPTY_LOADPATH_STR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An intermittent error occurred for which the root cause is not yet known. The system will continue working correctly. However, the information from the error message will be very useful for tracking down and fixing the bug.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can OSPF be optimized to reduce flooding and improve convergence times?
### Response:
OSPF can be optimized in several ways\n- Tune SPF and LS\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SERVER-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_LIB-2-OOR
### Response:
(Severity: 2), (Category: L2), (Description: The l2fib_mgr process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes are deleted.), (Recommended Action: Run show l2vpn forwarding resource command and check which resource(s) are running low on memory. Significant ACs will have to be deleted on the affected node to resume normal l2fib operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-INV_DEBUG_FLTR
### Response:
(Severity: 3), (Category: L2), (Description: The CFM debug library was notified about the creation of a debug item in SysDB which had an unexpected number of filter parameters. The corresponding debugging flag has not been enabled in CFM, which may lead to some debug not being printed as expected.), (Recommended Action: If any problems are observed, then try removing the debug filter using the 'no debug ethernet cfm' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-6-LOG_INFO_OWNER_PLANE
### Response:
(Severity: 6), (Category: OS), (Description: An info owner plane message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-OPTICS_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: OPTICS enity is inserted into the line card), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-MAX_LSA
### Response:
(Severity: 4), (Category: ROUTING), (Description: Maximum number of non self-generated LSAs has been exceeded), (Recommended Action: Check if some router in the network is generating large number of LSAs as a result of misconfiguration)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-MAC_1_TX_FIFO_OFLOW_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: MAC on NPU-1 had transmit fifo overflow on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_TX_FIFO_OFLOW_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported tx fifo overflow on bridge instance - 2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-STALE_SESSION
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZL-4-FPD_UPGRADE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Upgrade of redwood drivers impact timing funcationality such as SyncE and PTP.), (Recommended Action: Please reload the line card after fpd upgrade.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-EVM_REG_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A fatal error was encountered during evm initialization.), (Recommended Action: If the process does not restart automatically then try manually restarting it. A likely cause for this error is that the system has run out of memory. If this is not an out-of-memory problem and restarting the process does not solve it then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM_TEST-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: vkg_pm test encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: This is just test software which the customer does not get. so there is np actiom required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_GSP_GROUP_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an error while creating group for GSP communication. This software error will cause process termination to recover. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_EA-6-ERR_IM_MULTIPLE_NTFCNS
### Response:
(Severity: 6), (Category: L2), (Description: A batch from IM contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the PPP EA. No problems should be seen as a result.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_1_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-FPGA_SW_REV_MISMATCH
### Response:
(Severity: 2), (Category: L2), (Description: The FPGA software revision is different with the one supported by the running software, this could be caused by software upgrade which supports the new FPGA software revision.), (Recommended Action: Upgrade the FPGA with FPD CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-5-HBM_MEMORY_REPAIR
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This is an informational message in the SBUS Driver to indicate that HARD memory repair has been performed on the specified HBM memory.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-EVENT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Some initialization failure while loading the driver.), (Recommended Action: collect 'show service-ec trace location<ISM location>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_CONFIG_ERR
### Response:
(Severity: 4), (Category: SECURITY), (Description: An error occurred in the firewall controller whilst it was attempting to handle the default-interface configuration for the firewall specified in the message.), (Recommended Action: Roll back the configuration change, wait 10 seconds, then re-apply the configuration. If the error is still seen, restart the firewall controller process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-0-MAX_RESET_BRINGDOWN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This message indicates that the node has reached the maximum number of resets allowed, without successful recovery to reach or stay at the IOS XR RUN state. Therefore, it is brought down to IN_RESET state. The probable causes of the error are either an unexpected error on the node causing it to reset itself, or a failure in the expected communication between the node and the shelfmgr, leading the shelfmgr to reset the node in an attempt to have it recover.), (Recommended Action: 1- Please start out by inspecting the active RSP console logs and determine if there is repeated process crashes or any PFM errors reported from the node or if there is any timeout or hearbeat errors declared by the shelfmgr against the node. 2- If no such indication is seen in the RSP logs, then the next step is to inspect the LC console output itself to see if there is any errors reported on it. 3- If the above actions identify the root cause, please note it, collect the following information and provide this data to your Cisco technical representative. 4- Data to collect: - The full console output of both RSPs and the node console output if available. - The attachCon output for the IN_RESET node, when it was rebooted in step 3. - #show logging - #show tech-support shelfmgr - #show reboot history location <affected location> - #show pfm location 0/1/CPU0 - #show reboot pcds location <affected location> 5- If the root cause was not identified in above steps, the next step is to reboot the node IN_RESET and see if an error that identifies the root cause occurs and if the node can recover from the problem. It is important to have the LC console data connected at this point. If this is not feasible, then please issue the 'attachCon <affected location>' from the RSP Aux terminal immediately after rebooting the node: - #hw-module location <affected location> from the RSP console - #attachCon <affected location> from the RSP Aux terminal 6- Please contact your Cisco technical representative and provide the collected information to them. Please include the LC console/attachCon output collected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP_OFFLOAD-3-PACKET_DROP
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The Prescision Time Protocol (PTP) received a packet with an unknown protocol encapsulation and dropped it. This may have been an incorrectly encapsulated PTP packet, in which case PTP may operate incorrectly, or a misdirected packet for another protocol, in which case other protocols may operate incorrectly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV_AGENT-7-INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message occured due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_ALARM-3-MAX_PW_O_BVI_PER_SHG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Exceeded maximum number of PW over BVI bridge ports per SHG group.), (Recommended Action: Reduce number of PW over BVI bridge ports per SHG group and retry)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_OBJ_LIB-3-NAME_DLLINIT
### Response:
(Severity: 3), (Category: PLMGR_OBJ_LIB), (Description: The policy manager obj name library could not be initialized. This may affect the function of using AAA downloaded policies.), (Recommended Action: Identify the process name and job id that report the error from the printed out message, then collect running core dump via cli 'dumpcore running <job id>', and contact TAC with the output, then restart the process via cli 'process restart <job id>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-5-HA_NOTICE
### Response:
(Severity: 5), (Category: ROUTING), (Description: Information related to HA events like NSR readiness.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-FLOOD_DISABLE_BPORT_CONFIG_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Flooding disable on bridgeport not supported.), (Recommended Action: Remove flooding disable config from bridge port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-6-SYS_READY_CLI
### Response:
(Severity: 6), (Category: MGMT), (Description: This is expected when connection to configuration database comes up), (Recommended Action: 'Debug message only. No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-POWER_SUPPLY_REDUNDANCY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The router will have insufficient power to sustain traffic in the event of a power supply module failure.), (Recommended Action: - Please collect the following CLI command to determine the current budget situation and to see if there are any failed power modules. <CmdBold>admin show environment power-supply<NoCmdBold> - Install additional power supply modules and in case of presence of failed power module(s), replace those unit(s) until the alarm clears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-DEBLOBBIFIER_ERROR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter may have been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM_EA-3-DLCI_MATCH_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The FR VCM EA (Execution Agent) has a wrong value of the DLCI and is not the same as what the MA (Management Agent) sends.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-FABRIC_CARD_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the fabric card will be reset because the fabric software has requested to reload the node.), (Recommended Action: Check for history of PFM alarms raised against the fabric card from admin level CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_DIKE_TO_NBR_REMOVED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'Autonomic Network Control plane - DIKE tunnel ' 'to neighbor is removed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-CHKPT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Checkpoint infra related errors in autorp_mapping_agent), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes autorp_map_agent detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes autorp_map_agent detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-LIB_RX_INVALID_FEC_TYPE
### Response:
(Severity: 4), (Category: ROUTING), (Description: LDP received an invalid FEC type in a message from a peer.), (Recommended Action: Capture the packet from the peer and analyse. Fix the configuration on peer to not send invalid or unsupported FEC in the given message type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIDMON_MGR-7-MAX_CLONE_PROFILE_EXCEEDED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_ASIC_FGID_SRAM_BIST_DONE
### Response:
(Severity: 3), (Category: FABRIC), (Description: This message is seen when the FGID SRAM BIST operation fails to complete after a \ request is issued to start it for the identified ASIC. The result of the BIST \ operation for that ASIC is also captured in the message. This condition implies \ that the ASIC is either not powered up or it is not properly reset at initialization.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-4-DOWN_REV
### Response:
(Severity: 4), (Category: PLATFORM), (Description: For displaying down-rev notification.), (Recommended Action: tech support should be contacted for upgrade instructions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSPI_RPOT_RSVD_CTR_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RxSPI protocol reserved control word error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-NO_PROFILE
### Response:
(Severity: 6), (Category: L2), (Description: A profile has been attached to an interface. However, that profile has not yet been configured. Until the named profile is created, the interface will use the default profile configuration.), (Recommended Action: Create the specified profile, or remove the configuration associating the profile with the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-6-SECOND_CONNECTION
### Response:
(Severity: 6), (Category: L2), (Description: A second peer has connected to the Active TCP channel for the specified SSRP group, while there was already a connection to the socket. This can validly occur if the SSRP peer has gone away temporarily with being noticed (e.g. due to a process restart, or shutting the peer's interface), and has now come back and wants to reconnect. However, it can also occur if there is a misconfiguration, meaning that more than one SSRP peer wishes to connect to the same SSRP TCP channel. If this is the case, then SSRP will continually switch between using the two different peers, and never reach a stable state.), (Recommended Action: Check that the SSRP configuration for the network is correct. If this message is only seen once, it is most likely not a problem. However, if this message is seen repeatedly within a short period of time, this is a strong indication that there is a misconfiguration of SSRP in the network.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RETRY-4-DEBUG_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error. Retry debug library initilization failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-CALL_IPC_SEND
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: A VPDN CALL message failed to be sent to VPDN MGR. 1 or more sessions may not establish or may be torn down.), (Recommended Action: Allow the subscribers to reconnect. If the problem persists, you may need to restart vpdn_mgr and/or this client process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_8_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-MIXED_MEMORY_FORCED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Target node is brought up by 'admin hw-module reload' command. System operating in mixed line card memory mode, which is only supported temporily during line card upgrade or downgrade.), (Recommended Action: Correct the situation by using line cards with same memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-OPERATION_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-SCRIPT_KILLED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The execution of the indicated script has been terminated due to failure in completing the debug collection task in time.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-6-INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general info message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECY_DRIVER-4-LATE_PKTS_DETECTED
### Response:
(Severity: 4), (Category: L2), (Description: Secy Driver has detected an increase in Late packet counters, for the specified Rx SCI. The counters increase as a result of packets coming out of order due to network latencies Or a replay attack might be taking place. Some amount of tolerance is provided with the replay window config. Packets will be dropped as the macsec policy is in must secure mode.), (Recommended Action: Examine the cause of drops and take appropriate action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-ID_CERT_RENEW_FAILED
### Response:
(Severity: 3), (Category: LICENSE), (Description: The device has not communicated with Cisco for an extended period of time and the device has failed to automatically renewed the device registration with Cisco.), (Recommended Action: Please check the Smart Call Home settings and network connectivity to cisco.com.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BMP-4-DB_ATTACH
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to connect to PIRD shared memory database on initialization.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-CHECKPOINT_LOCK_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: The lock that protects the QSM checkpoint database could not be taken. The checkpoint database could become corrupted -- causing a restart of QSM to have incomplete data.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-1-HIDDEN_REQ_UPG
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An FPD requires upgrade which cannot be upgraded using XR CLI.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-3-REF_COUNT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was detected in the Platform SPAN module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ILLEGAL_TEMPLATE_TUPLE
### Response:
(Severity: 3), (Category: MGBL), (Description: Nvgen server obtained an incorrect cli template config tuple from system database. This may result in failure to generate complete template configuration in show run command. Or in internal config backup.), (Recommended Action: Collect the show logging output, console logs, tracebacks, show nvgen trace output, show runnning output, show config history and show tech-support sysdb. Contact TAC representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-LOC_INFO2
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The info about the total number of users of the specified resource.), (Recommended Action: It is an informational message along with packet depletion log message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-ROOT_CERT_MISMATCH_PROD
### Response:
(Severity: 3), (Category: LICENSE), (Description: Smart Agent received incorrect certificate for validation. Please contact your product support team.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-UPGRADE_COMPLETED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that Canbus Controller firmware upgrade is completed on the specified location.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-MRIB_UPDATE_RETRY
### Response:
(Severity: 5), (Category: ROUTING), (Description: Processing one or more updates may have failed. We will retry them. This is a not a problem.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-POWER_MODULE_REDUNDANCY_RESTORED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that power allotment in this rack is now normal. Power module redundancy restored.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_PIFIB-4-WARN_V6
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PLATFORM PIFIB, warning), (Recommended Action: This error is expected since the scale being configured is not supported. All the LPTS TCAM entries has been exhausted, no more new configuration can be programmed in hardware. Please collect 'show tech-support lpts' and 'show console logging' output. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RPC_SET_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A non-critical error has been encountered while allocating a per-CE label or while accessing the label database of the BGP process. An error while accessing the label database can cause the per-CE label for some nets to change at the time of a BGP process restart or after a failover without NSR.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-IDB_HANDLE_MISMATCH_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-SYSDB_LIST
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to read from SysDB failed, the result being that whatever action was being performed cannot be completed by the SNMP agent.), (Recommended Action: Check 'show context' command to see if any crash happened and sysdb is in a blocked state. If there is a crash, you may need to collect 'show process blocked' and 'run attach_process -p <pid of crashed process>' output. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-PATHMGR_SYMLINK_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Pathmgr symlink failure. This will impact dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL-4-MALFORMEDMSG
### Response:
(Severity: 4), (Category: ROUTING), (Description: A malformed RPL control message is received from a peer.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-GETLINE_DATA
### Response:
(Severity: 3), (Category: MGBL), (Description: 'lib/ui library API related to getline has failed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_MAC_IWF_SES_THRESHOLD_EXCD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-NODEID_GET_ERR
### Response:
(Severity: 3), (Category: INFRA), (Description: Nodeid can not be obtained.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-2-DEMUX_LIMIT
### Response:
(Severity: 2), (Category: L2), (Description: Just in case, the parameter is not found w.r.t. ifhandle, default demux limit gets set. first %s - Happened at second %d - demux limit value third %s - interface name), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_HEARTBEAT_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected a problem in the internal state machine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_MGT_CV_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 MGT code violation on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-LACP_PKT_DROPPED
### Response:
(Severity: 5), (Category: L2), (Description: There has been a jump in the received actor sequence number, indicating that a LACPDU from the partner has been dropped. Note that rate limiting on transmission takes place before the sequence numbers are incremented, so the warning will not be related to rate limiting on transmission. However, it is possible that rate limiting on receipt will cause a sequence number discrepancy.), (Recommended Action: This message indicates that a gap in incoming LACPDUs has been detected, possibly as the result of packet loss or rate limiting of incoming LACPDUs. Check packet counters on both devices for drops, and for locally rate limited LACPDUs using <CmdBold>show lacp counters<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-6-OP_DB_NON_EMPTY
### Response:
(Severity: 6), (Category: INFRA), (Description: SLA Client Library database module cleaned up whilst there were still operations in the database causing a memory dump of the Client Library to be taken. This has been caused by other modules failing to cleanup properly whilst shutting down the library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-DEST_LOCAL
### Response:
(Severity: 3), (Category: FORWARDING), (Description: It is invalid for a tunnel destination to be a local IP address. When this message is displayed, the user must change the tunnel destination or change the IP address on the local interface. When this is corrected, the tunnel will re-evaluate its state and come UP if other criteria for tunnel to be up are satisfied.), (Recommended Action: Change the tunnel destination or change the IP address on local interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-TUN_NULL_IFHANDLE
### Response:
(Severity: 5), (Category: ROUTING), (Description: This informational message appears as ifhandle of local tunnel route is NULL. Interface must be down. It should not be NULL if interface is up.), (Recommended Action: This message is info only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-BC_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: --), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-PACKET_OVERFLOW
### Response:
(Severity: 4), (Category: SECURITY), (Description: ISAKMP data is a payload of UDP packet, as such its length should be less than the UDP length. Each ISAKMP message has its own message length field. The message length field of this message was greater than the length of the UDP packet.), (Recommended Action: 'This situation could denote a denial of service attack or corrupted message')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-EVPN_BGP_RT_STITCHING_DEPRECATED
### Response:
(Severity: 4), (Category: L2), (Description: evpn evi <> bgp route-target <> stitching is deprecated. evpn vni <> stitching needs to be configured, and if required manual stitching side RTs can be configured inside it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-ERR_DLL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failure in Inventory Manager dllmain function call %s - indicates the reason of the failure. reason: %s - is the decoded error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_0_XAUI_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error - 0 from XAUI on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSPI_DIP2_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TxSPI staus bus DIP2 error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-4-WARNING_GENERAL
### Response:
(Severity: 4), (Category: SECURITY), (Description: SSH encounterd a warning condition.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-4-INVALID_TCN_CONFIG
### Response:
(Severity: 4), (Category: L2), (Description: The configuration specifies a topology change notification (TCN) propagation which is not valid, and consequently, the system will ignore this propagation path. A ring configured as a source of TCN propagation must not have port1 configured as a regular protected interface (i.e. port1 must be None or virtual channel). A ring referenced as a destination of TCN propagation must have port1 configured as a regular protected interface (i.e. port1 must not be None nor virtual channel)), (Recommended Action: Correct the configuration to adhere with the consistency checks between TCN propagation and port1.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTS0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-5-ISSU_LTRACE_INIT2
### Response:
(Severity: 5), (Category: INSTALL), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: Tracing will not work properly. Process will proceed running. Can restart the process to overcome this issue. IF error persists.Collect the error log with return value and core dump of the process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOL_DEMD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN AC redundancy?
### Response:
To configure an L2VPN AC redundancy, use the 'backup interface' command within the xconnect configuration mode. interface GigabitEthernet0/0/0
xconnect 10.1.1.2 100 encapsulation mpls
backup interface GigabitEthernet0/0/1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIRROR-3-ERR_SYSDB_EDM_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Failed to init edm for sysdb'), (Recommended Action: Collect the following details: 1. Command issued 2. show mirror trace. 3. console logs. 4. If config is restored from file, then filename/contents. 5.If command failed at startup, show config trace and show config failed startup.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_TSB_LC-7-DEBUG
### Response:
(Severity: 7), (Category: SECURITY), (Description: ACE TSB Debug Information), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-EFD_SHUTDOWN_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred when attempting to shut down an interface using EFD after a fault condition was detected by one of the local MEPs on the interface. This event was triggered by either a change within the network (e.g. detecting a defect with a remote MEP) or a change in configuration that enabled EFD on a service. This will result in the interface remaining up, when it should be shut down.), (Recommended Action: If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was triggered by a change in the network, the error may be cleared by restarting the cfmd process on the node where the error is occurring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR5
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_RM-2-INTERNAL_MSG
### Response:
(Severity: 2), (Category: L2), (Description: A critical function failed that expected to succeed. first %s - type of error second %s - reason for the error), (Recommended Action: Restart the atm_vcm process. Initialization failure will lead to lot of other errors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-EVM_EVENT_BLOCK_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Error during event block, this will impact dumper.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_0_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_CONST_BP_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-0 is constantly backpressuring bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-2-VIN_LOW_LEVEL_SW_SHUT_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Input voltage level is too low for this modules, it crossed the software shutdown alarm threshold. System will shut down if all modules cross this threshold'), (Recommended Action: 'Check/Charge the batteries.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBTM_LIB-3-INIT_LOGGING
### Response:
(Severity: 3), (Category: L2), (Description: PBTM library is unable to initialize logging.), (Recommended Action: No action is required. Process will be restarted. If not recovered, condition is fatal. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-BNM_PARSE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while processing a received BNM message - the error string gives more details. This error is not caused by malformed or invalid packets. If the error persists, CFM may not operate correctly.), (Recommended Action: If the error persists, it may be cleared by restarting the cfmd process on the node where the error is occurring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-TX_RX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected a parity error on Tx/Rx), (Recommended Action: Ensure the CPLD image is up-to-date. Reset the board to recover from the error. If the error persists after reset, contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-SYSDB_GET
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is Outbound Route Filtering (ORF) in BGP?
### Response:
ORF allows a BGP router to send its inbound prefix filters to a neighbor so that filtering can be done on the sending side. This conserves resources on the receiving router. It requires the ORF capability to be negotiated between neighbors. It is enabled with the neighbor capability orf prefix-list command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_FIB_NPU-3-PD_INFRA_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the DNX FIB NPU to indicate that an error was seen when trying to access PD infra resource.), (Recommended Action: Please collect the console log, FIB NPU traces (show cef trace loc <>), FIB NPU platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_VRFN_FNS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-3-POWER_UP_DATA_ZONES_FAIL
### Response:
(Severity: 3), (Category: LIB), (Description: Data zones could not power up due to low budget), (Recommended Action: Check the number of PEMs in the system)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-MSG_SIZE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: A message with illegal size was received or to be sent.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-LOOPBACK_FAIL_RESUME
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while attempting to return the status of a loopback start/stop/extend request. The CLI may be blocked, or may have returned an error despite the operation having succeeded.), (Recommended Action: The edpl_ma process should be restarted using the following command: - process restart edpl_ma)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-7-SRAM_DETAILS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Details on SRAM parity error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TCSETATTR_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_9_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_9 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-4-CCTL_LTC2978_ALERT_DAMPENING
### Response:
(Severity: 4), (Category: FABRIC), (Description: This is an indication that alerts are being received from LTC2978 at a rate exceeding 15 per second causing the dampening to be triggered. Interrupt is disabled for 30seconds after which it will be re-enabled.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-THREAD_MUTEX_INIT
### Response:
(Severity: 7), (Category: OS), (Description: A internal mutex operation has failed. This is a bug.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-VRF_CLEANUP_COMPLETE
### Response:
(Severity: 5), (Category: ROUTING), (Description: VRF in out of HOLD state. Any pending reconfigurations will take efect now.), (Recommended Action: This message is for information purpose only. Request to revisit config and scale)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-1-OOR_ROUTES_YELLOW
### Response:
(Severity: 1), (Category: ROUTING), (Description: MFIB on the node has detected the number of multicast routes has exceeded the prescribed limits. Any further routes increase could cause MFIB to block the routes from being programmed in hardware.), (Recommended Action: Take immediate action to delete multicast routes from the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_14_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Why is a microkernel-based architecture desirable for a carrier-grade network operating system?
### Response:
In a microkernel OS, most functionality resides outside the kernel in separate processes with their own protected memory space. A failure in a non-kernel process does not impact the kernel or other processes. This enables fault containment and process restartability without service disruption. Only essential core services remain in the kernel, minimizing the impact of any kernel failures.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-SRGB_FREE_POSTPONED
### Response:
(Severity: 6), (Category: ROUTING), (Description: Freeing the segment-routing global block (SRGB) has been postponed for a temporary situation (e.g. not all labels assigned for prefix-SIDs have been freed). The situation should be resolved automatically within few minutes), (Recommended Action: IF this message continues to be displayed for for several minutes, then restart the isis process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-6-IMDR_STARTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The MBI hello process is notifying shelfmgr that IMDR has started.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-2-MODULE_WARNING_REASON
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Some power module warning condition has been raised.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_LIST
### Response:
(Severity: 7), (Category: INSTALL), (Description: The Install infrastructure was unable to obtain some information which it requires to complete the current request or operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-UNKNWN_INTF_DEFAULT_QUEUE
### Response:
(Severity: 3), (Category: QOS), (Description: QMgr encountered an error in obtaining the interface default queue in a queuing asic for a given interface. This prevented QMgr from programming REDQ entry for the corresponding queue. Even though the interface is created, it will not be able to carry traffic), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_LCPM_SHOW-3-COMMUNICATION_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HFR_PM_SHOW encountered an error), (Recommended Action: Please enable the following and repeat the show command. Then, please provide the output to the technical support representative, if the issue persists. - show controllers pm trace errors location <> - debug im api errors - debug sysdb access)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-RCFG_REFRESH
### Response:
(Severity: 3), (Category: SERVICES), (Description: If a virtual firewall or other service is attached to an interface, then all cards in the system need to know. Similarly, if a service attachment is deconfigured, then all cards needs to be notified. This will not happen if the interface's line card is down (eg a preconfigured attachment is removed while the card is absent from the chassis and then re-inserted). A backup mechanism exists for this case, that ensures that any attachments that were deconfigured in such a situation really are removed globally. This error indicates that a problem occurred with this backup mechanism. So if a service attachment was deconfigured while the card was down, the rest of the system might not have caught up, and could still be diverting or dropping traffic for that interface.), (Recommended Action: If an interface seems 'stuck', then configuring an attachment again, committing the configuration, and then de-configuring that attachment and comitting should un-stick it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-4-CLIENT_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PLDMGR client reports an ignorable warning with error id, and description.), (Recommended Action: The warning is ignorable, so there's no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-CAPABILITIES_CONFLICT
### Response:
(Severity: 4), (Category: L2), (Description: The platform has passed invalid capabilities for the given interface. The error message contains details about the source of the error.), (Recommended Action: The interface in question may not operate correctly, consider removing the configuration that is flagged as conflicting. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_IPV4_EA-3-ERROR3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SSE IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-CLOCK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A clock operation failed. This should have only cosmetic effect on the MBI infrastructure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-AUTOROUTE_METRIC_DEPRECATE_NOTICE
### Response:
(Severity: 5), (Category: ROUTING), (Description: An autoroute metric has been configured using a deprecated CLI command or \ XML schema element.), (Recommended Action: Use the currently-supported autoroute metric CLI command or XML schema element.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-LPTS_SETOPT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An operation failed during LPTS option setting.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-3-FIELD_DQ_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OFA failed to create data qualifier on this NPU.), (Recommended Action: Verify your hw-module configuration. Otherwise, collect show-tech and contact cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-INIT_ERROR
### Response:
(Severity: 7), (Category: HA), (Description: An error was encountered during intialization of the checkpoint library. The message should indicate the error condition. This is most likely due to a coding error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-4-AO_ACT_KEY_CONFIG_CHANGE
### Response:
(Severity: 4), (Category: IP), (Description: It is NOT recommended to make a configuration change for an actie key. TCP-AO will take this change and start using it. Based on the nature of the change this might result into flap of the sessions which are using this key currently.), (Recommended Action: Please check if the configuration change done is correct and inline with peer configuration. If not, please correct it immediately. No need to re-configure it under BGP or to clear BGP neighbors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-BW_NOTIFY
### Response:
(Severity: 3), (Category: FORWARDING), (Description: Failed to send the bandwidth notification to its clients for the specified tunnel. The configured bandwidth (or default bandwidth if not configured) for this tunnel will not take effect.), (Recommended Action: Remove and reconfigure the tunnel.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-OPERATION_ABORTED
### Response:
(Severity: 3), (Category: INFRA), (Description: Specified install operation in the error message aborted.), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CLOCK_BATCH_CONFIG_NOT_SUPPORTED_IN_HARDWARE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Due to limitations in ASR9000 RSP frequency synchronization hardware, certain combinations of clock-interface config are not supported. If one clock-interface (sync 0 or sync 1) is configured in any of these modes: clock-mode bits-input t1 clock-mode bits-output t1 clock-mode bits-output 6m-output-only then the following configurations for the other clock-interface are prohibited: clock-mode bits-input e1 clock-mode bits-input 2m clock-mode bits-output e1 clock-mode bits-output 2m Note that 'clock-mode uti' is compatible with all other modes; that is, if one clock-interface is configured 'clock-mode uti' then the other clock-interface can have any clock-mode ... including 'uti'. Likewise, 'clock-mode bits-input 64k-input-only' is compatible with all other modes.), (Recommended Action: Do not attempt to configure RSP clock interfaces in mixed T1 and E1 modes. In this context, 'T1 mode' includes '6m-output-only' and 'E1 mode' includes '2m'. The simplest workaround to put your system in a consistent state where a not-mixed-T1-E1 configuration will be accepted is as follows: RP/0/RSP0/CPU0:ios# config RP/0/RSP0/CPU0:ios(config)# clock-interface sync 0 location 0/RSP0/CPUO RP/0/RSP0/CPU0:ios(config-clock-if)# port-parameters RP/0/RSP0/CPU0:ios(config-clk-freqsync)# clock-mode uti RP/0/RSP0/CPU0:ios(config-clk-freqsync)# commit RP/0/RSP0/CPU0:ios(config-clk-freqsync)# root RP/0/RSP0/CPU0:ios(config)# clock-interface sync 1 location 0/RSP0/CPUO RP/0/RSP0/CPU0:ios(config-clock-if)# port-parameters RP/0/RSP0/CPU0:ios(config-clk-freqsync)# clock-mode uti RP/0/RSP0/CPU0:ios(config-clk-freqsync)# commit RP/0/RSP0/CPU0:ios(config-clk-freqsync)# end With both ports in UTI mode, you will be able to change the configuration to fit your requirements.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-DUMP_ATTRIBUTE
### Response:
(Severity: 7), (Category: OS), (Description: The information message for debug use.), (Recommended Action: Displayed when a process is crashed. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_CONSUMER-3-MEM_ALLOC_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: The Multicast Port Arbitrator consumer library failed to allocate memory during mpa/mhost group creation/duplication and its record restoration, filling up their group information.), (Recommended Action: The system is running low on memory, if there is lots of config/routes, try reducing it. If there isn't too much config, then check if there are possible memory leaks of the concerned process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET_LOOPBACK-3-SHM_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize shared memory in the platform Ethernet loopback component), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-RULES_MA_FEATURE_LEN_EXCEEDS_MAX
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The ma-feature rules entry should be <= 28 characters when multiple-ma-instance is also included in the rules file. The rules entry ma-feature and MA startup must be corrected for the given ID or its parent resource group), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RASF-7-DBGSHUTDOWN
### Response:
(Severity: 7), (Category: ROUTING), (Description: The debug shutdown failed. The rasf will still run correctly, but debug commands may be unavailable.), (Recommended Action: There is no effect on functionality Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_PD-6-INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-3-ECC_ONE_BIT_SFP_CONTROL_A
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Poller device driver Detected and corrected one bit error on port A), (Recommended Action: Its a correctable error, no action needed. Verify no false DOM alarms for ports on corresponding poller device)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOL_DEME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_0_RX_FRAME_ERR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-0 received an errored frame interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-IMPLICIT_DOWNLOAD_IN_PROGRESS
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: An attempt to replicate the dataplane of an interface to a node to which it implicitly required replication (e.g. due to wildcard replication being used, and a new node coming up later) has taken an exceptionally long time. This may cause forwarding on this interface (via this node) to be broken.), (Recommended Action: The download will continue to be processed, so if the issue is transient and just taking a long time to clear then it will clear eventually and this message will stop appearing. If this message continues to be seen for a long time Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-EDM_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when MRIB tried to initialize conn to Sysdb for show commands.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-NO_OS_DEBUG_INFO
### Response:
(Severity: 7), (Category: OS), (Description: OS debug info is not ready yet.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-5-CTT_MGR_INIT
### Response:
(Severity: 5), (Category: L2), (Description: A notification that Connection Traffic Table manager is going to be started.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-LTRACE_INIT
### Response:
(Severity: 4), (Category: INSTALL), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: This indicates that the ltrace infrastructure could not be initialised. It only impacts ltrace message logging and has no impact on the functionality of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-6-NOT_ENOUGH_MAC_ADDRESSES
### Response:
(Severity: 6), (Category: SERVICES), (Description: The Interflex Manager was unable to obtain enough MAC addresses for the configured Interflex interfaces. The system has a finite number of MAC addresses in the hardware, which are all currently used.), (Recommended Action: A MAC address should be manually assigned to any Interflex interfaces which were unable to obtain one from the hardware.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-ADMIN_POWEROFF
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the card will be powered off because user has administratively configured 'hw-module power disable location <node>' configuration in one of the nodes of the card.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWTECH-5-NOTICE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-INSTALL_OP_SYS_ERR_SPECIFIC_NODES_INCONSISTENT_HDR
### Response:
(Severity: 2), (Category: INSTALL), (Description: A system error occurred during an install operation. This may indicate a transitive problem within the system, a problem with the code or a user error not verified by the install system. The system does not know what software is running on the specified nodes and it may be the case that the software on the nodes cannot operate correctly within its own node or with other nodes in the system.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repair' if anomalies are found. If incorrect behavior is seen then restart processes impacted by the install on the inconsistent nodes (use 'show install log <install ID> detail' for a list of impacted processes). Collect diagnostic information about the failure using the specific command and pass it to your TAC representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-4-NOVRF
### Response:
(Severity: 4), (Category: SNMP), (Description: Failed to find VRF related information that is required to send an SNMP PDU. This could be due to an internal software error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-BIOS_BOOT_MODE_CFG_ERR
### Response:
(Severity: 3), (Category: DRIVER), (Description: BIOS boot mode configuration to change BIOS default boot sequence has failed. This will prevent the card from booting with the boot mode specified by the user.), (Recommended Action: There could be some access contention issue to the remote card to perform the BIOS boot mode configuration. Retry the operation at later time, if the problem persist, try to restart ccc_driver on both RPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-PLUGIN_REG_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error was encountered while trying to load an SPP plugin library. The plugin will not be used. Packets may not be sent or received correctly for the affected location.), (Recommended Action: This problem may indicate an incompatible version of a plugin library has been installed. If the problem was triggered by an install operation, reversing the operation may fix the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-OS_DEBUG_INFO_MAP_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Memory mapping of OS debug info has failed. Check the error code for the direct cause of the failure.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you remove a software package in Cisco IOS XR?
### Response:
A software package can be removed in Cisco IOS XR using the 'install remove' command, which deletes the specified package from the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-HEALTH_MONITOR
### Response:
(Severity: 6), (Category: FABRIC), (Description: Ingressq driver monitors the ASIC every 5 seconds to look for any problems/inconsistencies. If an error is reported momentarily, it could be a false positive seen during a transient state, or during oversubscription. In case, the error is seen repeatedly, please contact TAC support.), (Recommended Action: If the error persists, please contact TAC suppport.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-FANTRAY_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: One or more fans on indicated fan tray operating below 30% of the set RPM. This is not a critical condition. If it is below 30%, the remaining fans in operation on this fan tray run at full speed.), (Recommended Action: Verify the failure, give CLI: (admin)# show env --> particularly fan and temperature output (admin)# show env trace (exec)# show env led details If the failure does not alleviate after 30 minutes, give CLI: If the problem persists for 1+ days, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-INCORRECT_VSIM_VERSION
### Response:
(Severity: 4), (Category: DRIVER), (Description: Virtual Interface Mac pool start/end address has been configured in Chassis prom. This will provide the Mac addresses required in XR VM.), (Recommended Action: Use idprom_tool to upgrade the backplane IDPROM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_ERR_CFEC_HDR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-5-SYSTEM_CLOCK_CHANGED
### Response:
(Severity: 5), (Category: LICENSE), (Description: System clock was manually reset.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialisation of trace functionality for parser failed. This would affect the debugging of parser.), (Recommended Action: Restart parser_server process (process restart parser_server). If the message recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_7_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_11_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-2-NO_MEMORY
### Response:
(Severity: 2), (Category: ROUTING), (Description: Insufficent memory to allocate buffer for RIB batching API'), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-BLG_RX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar fabric arbiter reported to Interrupt controller that the data it received had parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option explicit name feature?
### Response:
The MPLS TE path-option explicit name feature allows an MPLS TE tunnel to use a named explicit path configured separately from the tunnel. A named explicit path is a reusable path definition that can be applied to multiple tunnels. It provides a way to define explicit paths independently of tunnel configurations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-NULL_DPC
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The EA received a datapath control with NULL input data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-1-PREPARE_STARTED
### Response:
(Severity: 1), (Category: OS), (Description: Prepare phase started for the encryption operation request. Node will reload automatically once this phase is completed successfully. Use 'show disk-encryption status location all' to look at prepare status of each node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_RID_SES_LIMIT_NOT_REACHED
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Remote ID is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_WRITE_PORT_ID
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods write encountered error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_RM_INIT-3-FAILED
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS EA process encountered the specified error.), (Recommended Action: Collect the outputs of 'show qoshal trace location <location>' and 'show process all location <location>, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-5-FDIAG_HBLOSS
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Field Diagnostic heartbeat loss event has been detected on the indicated node. And the node will stay in FDIAG FAILURE state until shelf manager resume reception of FDIAG heartbeat messages.), (Recommended Action: If the affected node stays in FDIAG FAILURE state for more than 5 minutes, then check the status of Field Diagnostic with 'show diagnostic status' command to see if diagnostic testing is still running. If diagnostic is still running in the node, please ignore this failure, otherwise unload the FDIAG image with 'admin diagnostic unload location <node>' command to recover from this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-LOCK_RECURSIVE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to lock a network entry in the BGP Table database.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-TTY_NMSPC_PATH
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_TPDV_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: In T1 mode TPDV alarm is raised when the transmit data stream does not meet ANSI T1.403 requirements for transmit pulse density.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INIT-7-INSTALL_READY
### Response:
(Severity: 7), (Category: OS), (Description: The pakage installation software is now ready. This is not an error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD-4-CARD_NOT_PRESENT
### Response:
(Severity: 4), (Category: SERVICES), (Description: A node has been set to a role which is not supported. This could be because the wrong card is at this location, or no card is there.), (Recommended Action: Insert a card of an appropriate type into the specified location. If you believe that the card in the slot is of an appropriate type, ensure it is correctly booted (in IOX-RUN state according to 'show platform'). If everything looks right, and the role is still not enacted, then contact your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-5-BCDL_ERR
### Response:
(Severity: 5), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering auto-tunnel mesh feature?
### Response:
The MPLS traffic engineering auto-tunnel mesh feature allows a full mesh of MPLS TE tunnels to be created dynamically between a set of routers. It significantly reduces the configuration needed compared to manually configuring a full mesh. It is enabled with the mpls traffic-eng auto-tunnel mesh command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-ALL_CONN_LOST
### Response:
(Severity: 5), (Category: IP), (Description: The ntp server lost all connections with the clock sources.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-EVENT_CONN_OPEN_ALL
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to open all event connections of one event manager.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_27
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_PM-5-INFO
### Response:
(Severity: 5), (Category: PLATFORM), (Description: sip_pm for information purpose only.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP fast external fallover feature?
### Response:
By default, if a directly connected eBGP peer goes down, BGP waits until the hold timer expires to tear down the session. The fast external fallover feature immediately resets the session if the interface to the eBGP peer goes down, without waiting for the hold timer.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_NPH_LEN_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Invalid egress NPH length detected on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-2-CONFIG_INIT
### Response:
(Severity: 2), (Category: L2), (Description: Unable to register for configuration changes. Due to this, Frame Relay VCM configuration support will not be available. Some processes might be blocked or, there could be a system level issue.), (Recommended Action: Collect required_info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_QUERY_ORA-3-CERRNO_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_2_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-VMM_CLEANUP_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: A Sysadmin service used to cleanup VMs during failed after multiple retries. Retries will continue but manual intervention to clean up the invalid node may be required to sanitize the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_EDM-3-SYSDB_UNBIND_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed to disconnect from SysDB before starting the indicated subsystem.), (Recommended Action: restart policy_repository and check for re-occurence of issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM-6-PARAM_NOT_COMPATIBLE
### Response:
(Severity: 6), (Category: L2), (Description: A value in class attach onto interface or controller not inherited.), (Recommended Action: No Action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDSUTILS-7-INVALID_ARG
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-SETSOCKOPT_EDOM
### Response:
(Severity: 6), (Category: IP), (Description: An error occurred whilst trying to setsockopt on the socket. Session will continue.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TS_LS_FRAME_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a frame error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_PKT_F1_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 1 multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD-4-NOT_YET_IMPLEMENTED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: FWD, a function was not implemented.), (Recommended Action: No action needs to be taken.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-6-SEND_ERR
### Response:
(Severity: 6), (Category: SYSDB), (Description: Successful in sending the error code to client.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does process restartability and checkpointing enable high availability?
### Response:
Process restartability allows a failed process to be restarted without impacting the rest of the system. Checkpointing enables a restarted process to recover its pre-failure state. The checkpoint service maintains a redundant copy of the checkpointed state on the standby RP. This allows a process to resynchronize its state after a failover or restart.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-4-PLUGIN_ATTACH
### Response:
(Severity: 4), (Category: L2), (Description: The PIRD SPP plug-in failed to attach/detach the PIRD shared memory database after receiving an asynchronous message instructing it to do so.), (Recommended Action: If any problems are seen, they may be rectified by restarting the SPP process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-4-MTU_RANGE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The MTU on an interface or encapsulation is outside its operational range. This may result in traffic loss on the interface.), (Recommended Action: Check the MTU configuration on the interface, it may be necessary to raise or lower any configured values to achieve MTU values within the supported range. If this does not help Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_XCONNECT-3-XCONNECT_CONFIG_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A main interface cannot be configured for xconnect port-forwarding if subinterfaces with VLAN encaps are present.), (Recommended Action: Delete all the VLAN Sub-interfaces first and then configure the Main Interface for Xconnect Forwarding.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-0-ARBITRATION_LOCK_UNAVAILABLE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Failed to grab lock in DR mode as the lock is unavailable. Possible reason: Other RP booted up in Normal mode and permanantly grabbed the lock.), (Recommended Action: Make sure that if one RP is running as DR, the other RP is not booted up in Normal mode. Both RPs should be running either in Dual mode or in Normal mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-6-LTRACE_INIT_ERROR
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message, ltrace initialization has failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-RP_SHUTDOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: RP is shutting down due to reason mentioned.), (Recommended Action: If there is a standby RP in the router, failover will automatically occur. Otherwise, chassis will be brought down and a manual reboot will be neccessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-PEC_PWRNACK
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Not enough power required for operating the inserted expansion card.), (Recommended Action: May try to enable/Power-on the card, only if we have sufficient power.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-6-UPGRADE_FPGA
### Response:
(Severity: 6), (Category: L2), (Description: Upgrade SPA FPGA message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPP_PKT_F0_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 0 single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-FAULT_MINOR
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Minor fault detected. See syslog for fault name, location and fault details. Fault Detected), (Recommended Action: Minor fault. Find the fault name, location and fault details from the syslog. Use the show fm command on that module, use the show alarms command to see if a corresponding alarm is declared on that location. Based on the module and the fault, use the directions/wiki provided by the module owner to decide further action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-ENS_BULK_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens API , it returned failure. ens_bulk_register API failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE_UDI-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Miscellaneous software error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge domain storm control?
### Response:
To configure storm control for an L2VPN bridge domain, use the 'storm-control broadcast' and 'storm-control multicast' commands within the bridge-domain configuration. l2vpn
bridge-domain BD1
storm-control broadcast level 1
storm-control multicast level 1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-3-NOMEMORY
### Response:
(Severity: 3), (Category: INSTALL), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-DIE_OVERTEMP_MAJOR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: LC on die temperature sensor is risen above or fallen below major threshold.), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_IF_SES_THRESHLD_NO_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address on the given access interface is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISSU_GO_ACTIVE_INIT
### Response:
(Severity: 3), (Category: INSTALL), (Description: While creating event queue ISSU manager reported error in initializing data . ISSU operation will continue without any error. This initialization is attempted again after some time.), (Recommended Action: ISSU manager will retry after sometime to initialize data. If the issue persists even after tries, contact tac with 'show tech-support issu'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-5-LINK_BURST_INTERVAL_STRETCHING_INACTIVE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The condition triggering the LINK_BURST_INTERVAL_STRECTHING_ACTIVE syslog has been cleared. Interface delay measurement sessions now run using their configured burst interval.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKEND-3-MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: This message indicates process or system is running short of memory. SysDB will not operate correctly in low memory condition.), (Recommended Action: Check the overall process and system memory usage. If it pertains to the process showing the error, then restarting the process may fix the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_DUPLICATE_DIST_ID
### Response:
(Severity: 4), (Category: ROUTING), (Description: The configured distribute instance-id already used by another isis process.), (Recommended Action: Try a different instance-id value not used by any other isis processes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-3-SW_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: This message indicates that the driver has encountered an internal software error.Plese check error reason and prot,subport information in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-3-DETECTED_TX_PDMA_STALL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CPUCTRL TX PDMA ring remained full over non-transient period. Packets which could not be sent were discarded. The downstream ASIC may be stalled. Asic error logged with queue details.), (Recommended Action: Check ASIC error output for Ingress and Egress queueing ASICs. Check fabric status and connectivity for the node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-CUSTOM_VRF_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: ZTP does not support provisioning on interfaces under custom vrf configs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA-3-ACCESS_PORT_PROGRAMMING_INTERNAL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error has been encountered as nv satellite access ports beyond 1600 cannot be provisioned in hardware.), (Recommended Action: Verify that the number of satellite access ports per LC does not exceed the limit of 1600 access ports. It may get resolved by removing the current configuration and apply the config within the supported scale.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-OPERATION_TRIGGER_SYSTEM_RELOAD
### Response:
(Severity: 6), (Category: INFRA), (Description: Specified install operation needs explicit System reload for [de]activation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-4-CFG_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The STP IO process has failed to process the indicated configuration event. This event will not have taken effect.), (Recommended Action: If a transitory error is indicated then removing and reapplying the configuration may result in the config being successfully applied. Otherwise, restarting the process may allow the config to be successfully applied.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-REDQ_UPDATE_HW_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: QMgr encountered an error when flushing shadow REDQ entries to hardware.), (Recommended Action: This is a fatal condition. Hardware and software REDQ entries are out of sync. Might have to restart the LC 'hw-module location 0/0/cpu0 reload <path>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-REF_TRANSFER_FAILED
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The specified file could not be copied.), (Recommended Action: Check the path to the file is correct, and that there is connectivity to the specified server if using tftp.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-1-ERR_BIST
### Response:
(Severity: 1), (Category: FABRIC), (Description: BIST failed for the mentioned block. The driver should trigger a device reset to fix this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-6-FAB_MODULE
### Response:
(Severity: 6), (Category: FABRIC), (Description: This is to give infomation regarding fabric module type.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDSFS-7-FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: RDSFS encounterd internal error. Error could be either transient or persistent error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Also collect and provide show tech-support rdsfs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_RRW_LOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to aquire rrw lock to the request record area in shared memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-AUTOBW_REACH_MAX_LIMIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: This auto-bandwidth tunnel has a maxmal bandwidth request. It is trying to allocate more bandwidth than that limit. TE will limit the bandwidth request to its maximum value.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: SPA OC48 informational message), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNSEC-2-DPD_DETECTED
### Response:
(Severity: 2), (Category: SECURITY), (Description: DPD detected), (Recommended Action: No action required (Normal Operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA-6-HW_INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An initialization error has occurred while trying to bring up the LC hardware in the platform ICPE_EA component. The platform software should recover automatically if not then Process ifo_ea restart is required to register the debugging module), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_MGR_COMMON-3-READER_DATA_CORRUPTION
### Response:
(Severity: 3), (Category: INFRA), (Description: OBFL failed to read the data stored in persistent storage. This might be due to data corruption by the software or a user altering the obfl storage or files therein.), (Recommended Action: Ensure that no user has altered the files or tried to meddle with the filesystem on /mnt/plog. Process restart of obfl_mgr on the problematic node, will, in most cases resolves the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-NOTIFICATION_PATH_NULL
### Response:
(Severity: 3), (Category: MGBL), (Description: Parser received notification from NULL path.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_OVF_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA01 channel FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-5-MSG_PARTNER_NODE_DEAD_START_FAILOVER
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When a CPU in active DRP goes down, the standby CPU should failover as active.), (Recommended Action: None; this CPU will failover to active state)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOL_MAPPERD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-3-MGD_TIMER
### Response:
(Severity: 3), (Category: OS), (Description: A call to a mgd timer interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-MSG_CHAN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to connect to a message channel. This error could occur for two reasons. 1. The system is low on resources. 2. A hardware or software error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-TCP_NETWORK_COMMS
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred whilst trying to set an option on the TCP socket used for this connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The router can continue to be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_PKT_MAXLEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-3-EVENT_MGR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-5-SVC_NOTICE
### Response:
(Severity: 5), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INSTALL_MEDIA_RETRY
### Response:
(Severity: 3), (Category: OS), (Description: The install media was not detected. Waiting for udev to complete install media(harddisk) detection.), (Recommended Action: After VMAN exceeds the maximum retry limit, verify if install media (harddisk) is accessible and retry the installation again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_DISPATCH_PULSE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Failed to send a message due to invalid link check. Possible corruption in dispatch pulse.), (Recommended Action: Capture information as specified in the required_info section. Restart sfe_drvr to clear any out of sync issues.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Multilink_CLNT-3-CONN_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Unable to get connection info. Please check the reason for failure as specified in the format and check if it failed to retrieve the connection or failed to disconnect the conn.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-4-INIT
### Response:
(Severity: 4), (Category: FORWARDING), (Description: The Tunnel-IP MA process failed to initialize a critical component. The process cannot proceed and will restart to recover.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-6-HBM_LANE_REPAIR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates number of HBM PHY lane repairs were required. Displays the number of lane repairs required.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-OOR_LIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: This router has reached the maximum value for the number of Auto-RP mapping agent cache entries. Each Auto-RP candidate-RP sends the mapping agent a set of group-to-RP mapping ranges and PIM mode for which it desires to have RP candidacy. These mappings are cached by the Auto-RP mapping agent and distributed through the domain to all PIM routers. Reaching the limit on the number of cache entries can cause multicast traffic loss for some or all multicast groups. Steps should be immediately taken to reduce the number of cache entries or to configure a higher maximum value.), (Recommended Action: Consider reducing the number of group-to-RP mappings advertised from some set of the candidate-RPs or consider reducing the number of candidate-RPs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-INVMGR_REGISTER_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Inventory manager init API registration with HA lib failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_LIB-2-SHM_COUNTER_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: SHM counter has gone to an inconsistent state Logs need to be collected and Debuged.), (Recommended Action: The following needs to be collected and DE team to be contacted. show tech-support driver)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2TP-3-GEN_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-5-LINK_SHUT_DOWN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The intra-rack switch port was administratively shut down.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROMMON_BURNER-3-ROMA_ABORT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ROMA can't be burned when it's the boot rom because a failure during a burn would render the board inoperable.), (Recommended Action: Burn ROMB first using 'upgrade rommon b location <>' to write a valid image to rommon B. Then reload the board and attempt to burn rommon A again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-6-FAULT_INFO
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Information message.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-7-RELOAD_MEMBOOTED_MANAGEMENT_NODE
### Response:
(Severity: 7), (Category: INSTALL), (Description: A reload installation is not allowed to a membooted management node.), (Recommended Action: Either diskboot, or don't target installation to a management node when membooted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-HBLOSS_SCRIPT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The execution of the heartbeat loss log collection script has failed, and the error code is indicated in the error message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_POOL_INVALID
### Response:
(Severity: 3), (Category: ROUTING), (Description: FGID pool filled with invalid or out of range FGIDs, received from the FGID allocator.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-5-ROUTE_UPDATE_DROP
### Response:
(Severity: 5), (Category: ROUTING), (Description: An internal software error occurred and FIB had to throw away a route update), (Recommended Action: Try restarting the fib process to see if the problem goes away.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INFRA_MSG-5-RUN_LOGOUT
### Response:
(Severity: 5), (Category: INFRA), (Description: User logged out from shell), (Recommended Action: This is informational that user accessed the linux shell of the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP IGP sync feature?
### Response:
The MPLS LDP IGP sync feature ensures that LDP is fully operational on a link before the link is used for IP forwarding. It prevents blackholing of traffic while LDP convergence is still ongoing. The IGP advertises the link only after LDP is converged. It is enabled per-interface with the mpls ldp sync command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-STATE_CHANGE
### Response:
(Severity: 5), (Category: L2), (Description: For displaying state of a SPA), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-FPD_UPGRADE_STATUS_UNKNOWN
### Response:
(Severity: 4), (Category: INFRA), (Description: Some nodes have been timed out during apply by reload. The connection to Cluster Manager has encountered an error so the state of FPD Upgrade is unknown. If FPD Upgrade is part of this install operation, then the nodes may have been timed out prematurely. If FPD Upgrade is not part of this install operation, the nodes may have taken too long to boot for another reason, or the orchestration agent processes may have encountered an error. Please check <CmdBold>show hw-module fpd<noCmdBold> for details of any ongoing FPD operations.), (Recommended Action: Please obtain the output from the console or system log, and the entire output of the following commands: <CmdBold>show tech-support install<noCmdBold> <CmdBold>show tech-support fpd<noCmdBold> <CmdBold>show tech-support spi<noCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-7-SHOW_CLEAR
### Response:
(Severity: 7), (Category: OS), (Description: A sysdb show/clear callback information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-PROG_ERR_REQUEST_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 'FGID was unable to send a request to sfe_driver to get the fgids whose' 'programming has failed.'), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MCAST_EDM-7-BAG_REGISTRY_FAILURE
### Response:
(Severity: 7), (Category: ROUTING), (Description: The VIKING-MCAST library encountered internal error during SysDB/EDM init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-ACTIVATE_ABORTED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package activate requested on this satellite has been aborted, as requested by the user. Run 'show nv satellite status' for more information about the current state of the satellite.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-FSTYPE_MISMATCH
### Response:
(Severity: 4), (Category: MEDIA), (Description: The media storage device specified is formatted with a different file system type than expected. The running software version expects the device to contain a different file system tye.), (Recommended Action: Use the appropriate upgrade file system procedure for the device or use format command once all needed data on device has been saved.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMS-6-EMSD_SERVICE_STOP
### Response:
(Severity: 6), (Category: MGBL), (Description: emsd service stop), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-6-TRANSCEIVER_DISABLED
### Response:
(Severity: 6), (Category: L2), (Description: The optic interface module was disabled on the given interface, after the 'shut' configuration was applied to the optical controller. This will result in a link down. The traffic may start getting dropped after this message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-7-BOOT_REQ_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An invalid request to initiate MBI download has been received and therefore rejected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-DBNOTLOADED
### Response:
(Severity: 3), (Category: IP), (Description: Fail to load the DHCPv6 binding database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-IM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-SYSDB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace sysdb error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace sysdb error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sysdb trace client-errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sysdb trace client-errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-4-DEBUG_INIT_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: The 802.1Q NetIO component encoutered an error during debug initialization. This is likely to cause VLAN interface setup to fail.), (Recommended Action: If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to specify RSVP administrative groups?
### Response:
To specify RSVP administrative groups, use the 'mpls traffic-eng admin-groups' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng admin-groups Group1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-EXCESSIVE_ECC_SBE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The number of single-bit ECC errors has crossed the error threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-SERVER_UP
### Response:
(Severity: 6), (Category: SECURITY), (Description: TACACS+ server is reachable or up.), (Recommended Action: This is a log info message to indicate that TACACS+ server is up and running. Its not an error condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SEU_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A seu error was detected in RAM of the IM in given slot.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-4-OOM_STATE_UNTHROTTLE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_PARM_REDFS_DISABLE
### Response:
(Severity: 4), (Category: MEDIA), (Description: Redundancy FS got an invalid parameter value when Redundancy FS mirroring was being unconfigured), (Recommended Action: Report this message to TAC. Capture console log, 'show media', 'show mirror statistic' and 'show mirror trace' for TAC and ddts.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_BAG_OPS-3-NOMEM
### Response:
(Severity: 3), (Category: PLMGR_UIBAG_OPS), (Description: The node which logged this message is running low on memory and the requested operation could not be completed.), (Recommended Action: Either reduce the configuration applied on this node or increase its memory. If the error is persistent, contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL_CLIENT-3-GEN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-7-SPP_TRYMAP
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The vector packet path API bind routine has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMS_GET_CHAN_CHAN
### Response:
(Severity: 7), (Category: HA), (Description: An error was reported trying to obtain the channel ID.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KEYCHAIN-3-EVENT_MANAGER_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Event manager could fail if system resources (eg: memory) is not sufficiently available for use.), (Recommended Action: If it is related to process-level resources, restarting the keychain server process (kc_srvr) using the command 'process restart kc_srvr' might solve the issue. If the message recurs, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show key chain trace client <clientname> both<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show key chain trace client <clientname> both<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IP_EA-3-ERR_MEM_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 show memory summary </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> show memory location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-RN_ASC_DESC
### Response:
(Severity: 3), (Category: MGBL), (Description: A find operation in an internal data structure failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-CHKPT_TBL_INIT
### Response:
(Severity: 7), (Category: SERVICES), (Description: Could not initialize a table with the checkpointing server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-INTERNAL_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Internal error has occured), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-3-SYSCALL
### Response:
(Severity: 3), (Category: OS), (Description: The client library has failed a system call.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-INIT_FAILURE_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an initialization error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize debug. This condition indicates a problem where the debug init processed by the software is failed. - Failed to initialize ltrace. This condition indicates a problem where the ltrace init processed by the software is failed. - Failed to initialize p2mp frr timer. This condition indicates a problem where the p2mp frr timer init processed by the software is failed.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-SYSMGR_READY
### Response:
(Severity: 3), (Category: MEDIA), (Description: The main function failed to inform sysmgr that it is ready.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPB_I2C-3-UNRECOVERABLE_BUS_HANG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The attempted I2C bus hang recovery was not successful.), (Recommended Action: Physically OIR the board which is having the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_1_FAIL_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 1 failure on FIA 1.), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-3-MSG_SEND_ZERO_BYTES
### Response:
(Severity: 3), (Category: SYSDB), (Description: We are posting zero sized messages that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-3-OWNER_SYNCHRONIZATION_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: After an ISSU completes, error-disable state from the Owner is recorded ready for if another ISSU happens. Something went wrong such that the state couldn't be recorded.), (Recommended Action: Clear the error-disable state of all interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROM_UPGRADE_LIB-7-ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The rommon library upgrade error caused due to noidid error, connection error, forward msg.The error message has detailed information.), (Recommended Action: Retry the process and collect the console console log. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-3-INIT_RETRY
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the RAW process attempts to retry one of its initialization tasks with a network layer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD_MRIB-3-MISC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: This message indicates a miscellaneous error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mrib trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mrib trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_INIT-3-FAILED
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS EA process encountered the specified error.), (Recommended Action: Collect the outputs of 'show qos-ea trace all location <location>' and 'show process all location <location>, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SYSMGR_PROC_AVAILABLE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A failure occured while trying to tell sysmgr that we are available.), (Recommended Action: Check whether policy_repository process is running properly by command 'show process policy_repository' Check the install logs if all the packages are downloaded and install operations completed properly)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: SPA OC3/OC12 driver error messages), (Recommended Action: Please collect the output of 'show plim pos-spa oc3-oc12 trace all R/S/I/P' immediately before the ltrace buffer wraps.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR_CLIENT-3-ERR_SPINEID_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Crossbar driver encountered an Error in operation. Error string updates the reason for this error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-DEFER_VIRT_INST_PROC
### Response:
(Severity: 3), (Category: OS), (Description: The final activation processing failed to successfully defer.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-4-CPE_LIMIT
### Response:
(Severity: 4), (Category: SERVICES), (Description: MAX CPE ENTRIES SUPPORTED IS 1024.), (Recommended Action: Rollback.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-MPA_IDPROM_READ_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unable to initialize MPA due to IDPROM read error.), (Recommended Action: Please try to recover by doing the process restart of the process that generated the error. Copy the error message exactly as it appears on the screen and gather the output of the CLI 'show tech-support ethernet interfaces'. If the issue persists, contact your technical support representative with the gathered information)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-NH_INSERT_HEAP
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured when trying to clear redist information for a client.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-2-SELF_TEST_FAILED
### Response:
(Severity: 2), (Category: INFRA), (Description: The install software component has detected that the local installed software base is either corrupted or incorrect relative to the software installed on the rest of the system. This event may be caused by the insertion of a card with the wrong version of software in a live chassis, a failure during install operation, or a power failure interrupting an install operation. A new disk will automatically be prepared and the node will reboot from that disk.), (Recommended Action: There is no direct action required, the system should automatically recover. To get more information on what caused this event, you can run the command 'show tech-support install'. If the problem happens repetitively, it could indicate a hardware problem which prevents proper software installation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-WARN_TERM
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during CDP's termination. In this situation CDP should recover automatically.), (Recommended Action: CDP should recover automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PFI-3-SET_GLOBALS_SHM_OPEN_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to setup shared memory due to failure in shared mem open. The returned err code should indicate the reason for the failure of the api. This is a transient error in the system likely due to low mem condition etc. The impact to system is minimal except that a few counters dont get set. The client logging this error should retry the api and/or handle this error accordingly. If this error is seen persistently, Initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-7-LTRACE_INIT
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-4-WARNING_DIGEST_FILE_MISSING
### Response:
(Severity: 4), (Category: SECURITY), (Description: SAM found that the digest file in NVRAM is missing, discard the memory packages.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-DEBUG_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_PD-3-ACTION_INVALID
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The configured actions for a class-map are not valid.), (Recommended Action: Modify the policy-map to a valid configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_MUTEX_FATAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected fatal error occured when trying to lock or unlock a RIB mutex.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_DEBUG_SERVICES
### Response:
(Severity: 3), (Category: OS), (Description: A call to a debug services interface failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_9_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVEDGE_DATA-1-SHM_CORRUPT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Critical error, recommended LC reload), (Recommended Action: LC Reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message is informational; it doesn't indicate a failure, only that some out-of-the-ordinary event has been encountered. The message contains details about the source of the event. Frequency synchronization functionality will not be impacted by this event; however, history ('show sync-agent ...') and/or debugging support may be unavailable.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_WL_OUT_OF_RANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-S2_PID_MSG
### Response:
(Severity: 3), (Category: FABRIC), (Description: CRS-X S2 fabric card with PID:CRS-FCC-SFC-400 currently in use with atleast one CRS-1 S13 fabric), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM_EA-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_EXTFMTSTR
### Response:
(Severity: 5), (Category: SYSDB), (Description: The packed tuple returned from SysDB is in some way corrupt. The format string it contains could not be read.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOSHAL-4-QOS_CONFIG_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: config time warning regarding config adjustments and any other warning.), (Recommended Action: This is a config time warning. The message would indicate the nature of warning and the action to be taken.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_SVR-7-SYSMGR
### Response:
(Severity: 7), (Category: OS), (Description: The process was initialized successfully but was unable to inform System Manager of the success.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETFLOW-6-INFO_CACHE_SIZE_EXCEEDED
### Response:
(Severity: 6), (Category: MGBL), (Description: This is an informational message to indicate that the specified flow monitor map cache size has been exceeded.), (Recommended Action: If this message is being issued too often, you might consider increasing the cache size. But keep in mind that the maximum cache size is 1,000,000 entries and it may put a strain on memory consumption in the LC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the configuration session lock feature in IOS XR?
### Response:
The configuration session lock feature in IOS XR allows an administrator to lock the configuration mode so that no other user can make configuration changes. This prevents multiple users from making conflicting changes simultaneously.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB_CLIENT-3-GEN_ERR
### Response:
(Severity: 3), (Category: L2), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-DUP_TE_LINK_FRAG_UPD
### Response:
(Severity: 4), (Category: ROUTING), (Description: An opaque LSA has been received which contains a TE Link, which is already associated with another Opaque LSA originated by the same router. Hence the association of the TE Link is moved from the old to the new LSA and the corresponding update has been sent to TE. This is mostly caused when the originating router is a non-Cisco router and it has undergone a restart without NSF configured or if all interfaces have gone down on the router and have then come up in a different order.), (Recommended Action: Suggested to configure NSF on the non-Cisco box. Check for any discrepency the MPLS TE database or any Tunnel flaps. If not then ignore the message, else Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-4-NO_IP_ADDRESS
### Response:
(Severity: 4), (Category: SECURITY), (Description: There is no IP address configured for the specified interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-6-PORT_DEL_INFO
### Response:
(Severity: 6), (Category: L2), (Description: Port deletion happened after the threshold time.), (Recommended Action: This is an informational message.Upon seeing this message collect the trace log via 'show plim ether trace error location <>' 'show plim ether trace info location <>' 'show tech-support ethernet ' and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERVICE_SE-3-ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Associating block with a file descriptor.), (Recommended Action: Restart the plim_services process (process restart plim_services location <>) If the issue persists, do a cold reboot Services PLIM MSC(hw-module location 0/2/CPU0 reload).If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_1_FIADDR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-1 from FIA DDR on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LOW_VOLTAGE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK voltage less than or equal to the low voltage warning threshold. The CPAK is the pluggable optics on the line cards. The voltage threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_SOCKET-2-NOMEM
### Response:
(Severity: 2), (Category: L2), (Description: Memory on the router is critically low. %d - amount of memory that was tried to be allocated.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. LC reload alone will recover the situation. All information to be collected before the reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-OUT_OF_SEQ_FREE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform independent FIB is freeing a MPLS leaf before the corresponding MPLS gtrie completes its re-initialization after restarting process fib_mgr. It is an internal software error. It is caused either by a sequencing error in platform indepedent FIB software or by the MPLS gtrie re-initialization failure in platform depedent software which is reported via another error log before this log is seen.), (Recommended Action: Please collect the following info: <CmdBold>show platform<NoCmdBold> <CmdBold>show version<NoCmdBold> <CmdBold>admin show install active<NoCmdBold> <CmdBold>show logging<NoCmdBold> <CmdBold>show process fib_mgr location <node><NoCmdBold> <CmdBold>show tech cef<NoCmdBold> <CmdBold>dumpcore running process fib_mgr location <node><NoCmdBold> The 'node' is the location where this IOS message was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-7-ERR_SEND_EGRESS_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Cannot send packet to pdma queue %s - error description %x - QAD queue id %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %x - error code), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-CARD_ABSENT
### Response:
(Severity: 3), (Category: DIAG), (Description: A line card could not be located in a slot where a diagnostic action was requested.), (Recommended Action: Ensure the targeted line card is properly seated in the specified slot. If the line card is properly seated, ensure the correct slot was indicated in the command-line interface. If the line card is well-seated and the correct slot was specified, copy the error message exactly as it appears on the screen as well as the output of show tech-support and paste the output into a separate file. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-3-PCI_ATTACH_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An error has occured as pci client failed to attach to pci server), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some techniques IOS XR uses to achieve seamless scalability?
### Response:
IOS XR achieves seamless scalability through a distributed architecture, separation of control and data planes, and stateful process restartability. It can accommodate additional route processors, line cards, and chassis without service interruption. The distributed data plane can be scaled by adding more line cards. The control plane can be scaled by distributing protocol processing across multiple route processors.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_RECV_PAK
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error has occurred receiving the packet. This is most likely due to some failure in a system service or a limited resource being exhausted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-MUTEX_LOCK
### Response:
(Severity: 7), (Category: MEDIA), (Description: A required mutex lock failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_MQ_PKT_LEN_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 0 MQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-5-ADJ_UPDATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: FIB has detected an invalid adjacency event which has been dropped. Traffic being forwarded via the next hop and/or interface, may be forwarded incorrectly or dropped.), (Recommended Action: Check that traffic being forwarded via the next hop shown in the syslog, is being forwarded correctly. If it is no further action is necessary. If traffic is being forwarded incorrectly, restart the fib_mgr process on the affected line cards. If no further errors are seen on fib_mgr restart, the problem has been cleared.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-LTRACE_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: There was a failure during an ltrace_init api call which resulted in the failure as indicated in the message text.), (Recommended Action: None of the traces can be saved in this case. If tracing is very much important to be collected then restarting of ipv6_io may fix this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8508-2-LINK_TRAIN_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIE link train failure), (Recommended Action: Please reload the board using the following command: 'reload location <>' If the issue persists please, contact your technical support representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-THREAD
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent was unable to carry out an operation on an internal thread. The HTTP process may no longer be able to function correctly, and may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-LINESIDE_CLOCK_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Line side clock fault detected/cleared on port), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-7-PROC_RESET_PASSED
### Response:
(Severity: 7), (Category: DIAG), (Description: Process reset successfully as part of diagnostic software self recovey in case of ce switch loopback test failure. Its just a debug console message. As part of this reset dump will be generated.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-3-ALLOC_FAILURE_MSG
### Response:
(Severity: 3), (Category: OS), (Description: This is a generic error msg for memory allocation failure. The RDS library tried to allocate a memory and it wasn't succesful. Can happen when system is running low in memory), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAPS-4-RANGE_MISMATCH
### Response:
(Severity: 4), (Category: IP), (Description: Client requests an address/prefix from a specific subnet and the configured range does not match to the subnet. Address allocation will fail, as a result.), (Recommended Action: Revisit the configuration. Make sure that a valid address/prefix range is configured for the subnet. Do not include broadcast address in address range configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-CPUTUNES_SHARES_LIMIT
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting more CPU shares than the system has available for virtual services.), (Recommended Action: Deactivate any other virtual services to free up CPU share resources and activate this virtual service. If that does not address the problem, then enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-MIB_CHKPT_ITEM_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: CFM encountered an error while trying to maintain its checkpoint database, for a single item in the database. The checkpoint database is used to manage persistent MIB index values for accessing Domains and Services over SNMP. If an error was encountered then CFM has been unable to guarantee that MIB index values will be correctly maintained across process restarts, and existing database objects may have their MIB indices re-assigned.), (Recommended Action: CFM should continue to operate normally, except for possible re-ordering of MIB index values for the affected items. CFM will have tried to correct any errors it encountered in the checkpoint database. If additional problems with CFM configuration are observed, then restarting the CFM Global Manager may help to resolve the problem. The CFM Global Manager can be restarted by issuing 'process restart cgm' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-EA_POL_MOD_ROLLBACK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFMon EA encountered an error during rollback phase of policy modification on an interface. In this condition, h/w programming of the policy may not be in sync with policy configuration.), (Recommended Action: Remove the Vidmon policy on the interface for which the this error message is printed and then re-apply the policy)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-SW_MISMATCH
### Response:
(Severity: 2), (Category: INFRA), (Description: The IOS-XR install infrastructure detected that a node was not running the expected software. The node will be reloaded by the install infrastructure, and re-imaged to match the expected software. This situation may occur if a node is reloaded after an install operation starts, but before install commit is executed. Note that: - This reload is automatic, and does not involve any user intervention. - The node in question will be out of service until the re-imaging process is complete. - After the re-image, the system should be restored.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PW_INTR_HDR_PRS_EOP_SOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PW_INTR_HDR_PRS_EOP_SOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_OVR_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA00 burst FIFO overflow error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-LRD_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when using a logical router daemon api), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR node protection desired feature?
### Response:
The MPLS TE FRR node protection desired feature allows link protection to be used even when node protection is configured on a tunnel. It provides a way to prefer node protection but use link protection as a fallback. The tunnel is protected if possible, but a best-effort approach is used otherwise.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-NT_SWO_PCIE_SWITCH_RD_WR_FAIL
### Response:
(Severity: 6), (Category: INFRA), (Description: The Ethernet Switch Driver uses the scratch registers on the PCIe Switch to exchange protocol messages with its peer running on a different Shelf Controller card. The driver operation to either read or write to these registers have failed. This could be a transient failure that is expected to be seen in a small timing window during which the Ethernet Switch Driver on both SC0 and SC1 are trying to get control of the Switch Card. The Ethernet Switch Driver will retry the operation until it succeeds.), (Recommended Action: No action is required from the operator. The system will self correct from this condition and it is a transient failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-SCRIPTLET_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: An RPM scriptlet has returned an error during execution. The install operation will still proceed as normal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPIDB-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational message. No action needed), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-5-FILE_DOWNLOAD_FAILED
### Response:
(Severity: 5), (Category: L2), (Description: Three attempts were made to download a remote file at the specified URL, all of which failed. This prevents leap second values from being calculated correctly. Another three attempts will be made in 10 minutes.), (Recommended Action: No action is required. Further attempts by the system to download the file will be made in 10 minutes. If the message continues to be seen, then a check should be made to ensure the URL is available. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-CHKPT_SAVE_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred saving checkpointed information, most likely due to a memory allocation failure.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY-3-BAGREGFAILED
### Response:
(Severity: 3), (Category: OS), (Description: The filecopy_process was unable register its bags during startup. This will result in the filecopy_process being terminated. The problem may be due to a transient condition like low memory. Try restarting the filecopy_process - you may do this by creating a new ccCopyEntry row in the CISCO-CONFIG_COPY-MIB. If the problem persists after a few tries, please open a bug and include the release number for the infra/filecopy/server component, the logged error message containing the traceback and a copy of the running-configuration at the time of the error.), (Recommended Action: This indicates a low memory condition. Collect memory statistics using following command Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show process memory<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show process memory<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-6-INFO_LOG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-7-NODEID
### Response:
(Severity: 7), (Category: OS), (Description: Procfind was unable to determine the ID of the node on which it was running, and therefore failed to initialize.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-ASYNC_HANDLER_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in attaching async handler.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-5-DUMP_SUCCESS
### Response:
(Severity: 5), (Category: OS), (Description: Core dump succeded), (Recommended Action: Informational message.No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHNLZD_EFCM-3-ERROR_COMM_ERR_SET_EFC_ENTRY
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred in the Extended Flow Control Manager. An attempt to set an entry in the Flow Control calendar failed. This error indicates that messaging between the SPA process and the Jacket process failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-PLIM_STATE_CONS_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in during ens initialization. This could lead to plim_state not published to XR world.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_DLL-5-ERR_ASIC_SBE
### Response:
(Severity: 5), (Category: FABRIC), (Description: CCSQ encountered a single bit error in the mentioned block. Persistent errors are corrected by the software. Non-persistent errors are automatically corrected by the next write operation.), (Recommended Action: This error is an correctable error. There are no side effects. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-EVENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: A static routing process failed unexpectedly when processing an IP address change event. This may lead to spurious or missing connected and local routes in the routing table.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-5-ENDPOINT_BURST_INTERVAL_STRETCHING_INACTIVE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The condition triggering the ENDPOINT_BURST_INTERVAL_STRECTHING_ACTIVE syslog has been cleared. Endpoint delay measurement sessions now run using their configured burst interval.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth overflow feature?
### Response:
The MPLS TE auto-bandwidth overflow feature allows auto-bandwidth to react more quickly to sudden traffic spikes by triggering an immediate bandwidth adjustment when the measured rate exceeds a configured overflow threshold. It aims to ensure the tunnel can accommodate bursty traffic patterns.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-VRF_DB_UPD_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The VRF database in cgn-ma was not updated .), (Recommended Action: This is a serious error and cgn_ma process has to be restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-4-ROOT_DEVICE_BUS_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A PCIe bus error has occurred. The message has the root device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-5-RECURSIVE_LOOP
### Response:
(Severity: 5), (Category: L2), (Description: Recursive loop was detected. The route update will be dropped), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-3-ECC_UNCORRECTABLE_SFP_CONTROL_A
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Poller device driver detected multiple bit errors and can't correct on port A.), (Recommended Action: Try to OIR the optics on the poller ports. If problem persists, plugin different optics and do also try for LC reload. If still problem persists, it could be faulty optics.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Rx power less than or equal to the low Rx power warning threshold. The SFP is the pluggable optics on the line cards. The Rx power threshold values are read from the SFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_EA-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: An unexpected internal error has occurred in the SBCSVI EA process. The process will restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_PARM_REDFS_PART
### Response:
(Severity: 4), (Category: MEDIA), (Description: Redundancy FS got an invalid parameter value when Redundancy FS was partitioning the media for mirroring), (Recommended Action: Report this message to TAC. Capture console log, 'show media', 'show media trace', show mirror statistics' and 'show mirror trace' for TAC and ddts.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-3-ERR_DCMD_PSARB_GET_CURRENT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Software will automatically do recovery by restarting the reddrv process.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTIO-4-PORT_CREATE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The VTIO SPP plug-in failed to create a port in its local database.), (Recommended Action: Check the EnXR Netserver is running and the topology specified at boot is correctly set-up using the ltopo tool.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-KDUMP_CREATE_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The creation of the host kernel core file returned error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-6-CTRL_ETHER_OIR_ADD_EVENT
### Response:
(Severity: 6), (Category: DRIVER), (Description: card_mgr has detected eobc add oir event for qsfp/sfp interface), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITCAM-4-low_entries
### Response:
(Severity: 4), (Category: PLATFORM), (Description: There are very few tcam entries available to be allocated to a region. All the rest of tcam entries have been allocated to one of the regions.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-ACCT_MSG_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Accounting message could not be sent to the AAA server.), (Recommended Action: Check that accounting in configured on the LMA using command 'aaa accounting ...'. if not, then configure the same and try again. Check the AAA and RADIUS configurations. Check that the RADIUS server is reachable. If the RADIUS server is reachable, but the RADIUS requests are not received by the RADIUS server, or if the RADIUS servers are not sent out from this router, or if the RADIUS messages are rejected by the RADIUS server, then do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-NODE_INT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node encountered an error due to internal software issue and is able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-INIT_GET_VALUE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when retrieving a required value during initialization. As a result the BGP process can not initialize.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRIVER_LITE-3-ERR_THREAD_ATTRIBUTE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabric driver was unable to change the interrupt thread to an IO thread. Because of this failure, the interupt thread will not be able to receive the interupt thread events. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr_lite) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: L2), (Description: --), (Recommended Action: Typcially these indicate that ltrace is out of service. check at other processes using ltrace and see whether the problem happens to them.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROMMON_BURNER-3-NO_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Memory allocation failed, Not enough memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SIGSEGV_INFO
### Response:
(Severity: 4), (Category: OS), (Description: Signal info), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IXDB-3-GC_ERROR
### Response:
(Severity: 3), (Category: SYSDB), (Description: There was an internal error during garbage collection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CHASSIS_POWER_OFF_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Chassis wide pwr off operation has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_LIB-4-UNBIND
### Response:
(Severity: 4), (Category: ROUTING), (Description: Unexpected error during client unbind operation. This may result in a resource leak.), (Recommended Action: If there is a evidence of a memory leak in the process which reported this error, restart that process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BLWM-4-WARNING
### Response:
(Severity: 4), (Category: OS), (Description: For displaying blwm debugging information.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth overflow feature?
### Response:
The MPLS TE auto-bandwidth overflow feature allows auto-bandwidth to react more quickly to sudden traffic spikes by triggering an immediate bandwidth adjustment when the measured rate exceeds a configured overflow threshold. It aims to ensure the tunnel can accommodate bursty traffic patterns.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSDB_DATALIST_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper keeps various config related data in sysdb. Failure of sysdb datalist under config for dumper. This might impact the funcitoning of the dumper.), (Recommended Action: Contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid> 6. show-tech sysdb 7.If possible please collect debug messages of dumper.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL_CLIENT-6-GEN_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPU Control FPGA operation information.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-NOSELF
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal error occurred. An interface was not fully initialized when an OSPF related event occurred.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf interface <intf name> - show ospf <process-name> trace all - show running-config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-OPEN_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Status Database server (FSDB) failed to open a rommon file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSH_IPC_EM-7-VERSION_MISMATCH
### Response:
(Severity: 7), (Category: PLATFORM), (Description: OSH IPC header contains a mismatched version field.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-PLATFORM_GET_MY_NODEID_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to get the node ID for the node on which the caller is running.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-TRANS_MISMATCH
### Response:
(Severity: 2), (Category: INFRA), (Description: The IOS-XR install infrastructure detected that a remote node has a different operational state to that of the active RP. The node will be reloaded by the install infrastructure, and re-imaged to match the expected state. This situation may occur if a node is reloaded during an install operation, and a commit has been performed before the node has come back up. Note that: - This reload is automatic, and does not involve any user intervention. - The node in question will be out of service until the re-imaging process is complete. - After the re-image, the system should be restored.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-NOSIBLING
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: The server has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-EXTERNAL_API_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Common external API returned an error), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CCM_GEN_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred when attempting to generate or disable CCM messages for a number of local MEPs. This may result in outgoing CCM messages containing incorrect flags, interface state information or CoS bits, no CCMs being sent at all, or CCMs being sent when they should cease. If the error persists, CFM may not operate correctly. The regeneration event that has failed was triggered by the protocol event mentioned in the message description.), (Recommended Action: If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was the result of interface state changes or an attempt to set/clear the RDI bit, the error may be cleared by restarting the cfmd process on the node where the error is occurring, or shutting down and re-enabling any affected interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PMLIB_CLIENT-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: svc pmlib client encountered a fatal error and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-DROP_COUNTER_NOTIFY
### Response:
(Severity: 3), (Category: FABRIC), (Description: Drops found from SFE Blocks), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-NON_CHKPT_MSG
### Response:
(Severity: 7), (Category: HA), (Description: A message request for a non-checkpoint component was received by the handler function.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-GET_FILE_INFO
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not get a required file information, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-6-INFO_OOM
### Response:
(Severity: 6), (Category: ROUTING), (Description: This is an event associated with out-of-memory conditions on the router. If the new state is MINOR, no new VRF contexts or interfaces will be activated. If the new state is SEVERE, some VRF contexts and interfaces may be forcible deactivated in order to free up memory. If the new state is CRITICAL, the RIP process will be shutdown. If the new state is NORMAL, RIP will behave normally. If a VRF context or interface is forcibly deactivated, it will not be activated again when memory state returns to NORMAL unless the user explicitly clears the out-of-memory condition in the VRF context or the interface using the 'clear rip' command.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_MIB_CLEANUP
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the cleanup of the DLL. This may result in the DLL not being completely cleaned up, possibly causing errors in a subsequent re-initialization of the DLL.), (Recommended Action: Restart the snmp process reporting the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD_LIB-4-PFX_MON_LIMIT_REACHED
### Response:
(Severity: 4), (Category: ROUTING), (Description: The prefix list configured for Prefix monitoring matches more than recommended number of prefixes. This affects the routing convergence.), (Recommended Action: Restrict the prefix list to match recommended number of prefixes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-AIB_SHM_OPEN_RDWR_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'while opening Shared memory in RDWR to store AIB entries during initialization.' 'shm open failed.Process will exit with failure'), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_0_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-4-BACKUP_LOG_MEM_ALLOC_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the NPU Driver to indicate that it failed to allocate to memory for reading readdir_r.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-MONITOR_DISABLE
### Response:
(Severity: 4), (Category: DIAG), (Description: The specified test is no longer a health monitoring test because health monitoring has been disabled.), (Recommended Action: The system is working properly and no user action is required. If you want the requested test to be a health monitoring test, enable health monitoring and ensure your test is enabled as a health monitoring test.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-PART_NAMES_GET_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Nvgen server could not get the changed partition names from cfgmgr'), (Recommended Action: Collect the show logging output, console logs and error trace. Collect the show nvgen trace output. And contact tac representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCU-3-OLD_FPGA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: If the SP FPGA version is below the minimal version, the feature to check if the FPGA and the MCU are synchronized is not working correctly. To prevent any unexpected behavior, the application that is reporting the out of synchronization will be disabled.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-3-DETECTED_EGRESSQ_QUEUE0_PDMA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver detected an attempt to DMA a packet to egressq queue 0. The packet was discarded and not sent.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNSEC-2-REKEY_DONE
### Response:
(Severity: 2), (Category: SECURITY), (Description: rekey has been done), (Recommended Action: No action required (Normal Operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-3-INT_HT1_DROP_INT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HT1 Drop Inband Message Event: HT Inband Interrupt(s) have been filtered and dropped due to a previously sent MSI that has set the H/W mask and has not been cleared by S/W.), (Recommended Action: Save log file and report this error. If the issue persists, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTIO-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The VTIO SPP plug-in failed to initialize.), (Recommended Action: If any problems are seen, they may be rectified by restarting the spp process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTSDRVR-6-OTS_OTDR_AUTOSCAN_LOG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This messages provide OTDR autoscan status details), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-SESSION_UNEXPECTED_FSM_EVENT
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected FSM event occured. The given event is not possible in the current state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-MY_NODE
### Response:
(Severity: 3), (Category: OS), (Description: An error occured whilst PlaceD tried to retrieve its node information. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-TYPE_MISMATCH_FOR_KEY
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-WORKER_THREAD_BUSY
### Response:
(Severity: 6), (Category: OS), (Description: Too many processes crashes or dump request simultaneously), (Recommended Action: This is an informational message. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ENDCOPTIONINCOMPLETE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'end option mark is incomplete in the command. The calling function the coption id and the commands are are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_IO-7-ERR_WAVL
### Response:
(Severity: 7), (Category: ROUTING), (Description: Some error occurred in WAVL operations The text of the message displays the failed operation and the related wavl tree. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-SIGEVENT_SEND_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_GBL_CFG-4-ERR_EVM_CREATE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE GBL failed to create its Event Manager which is a critical resource for the operation of the process. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_SHOW_PROCESS-7-UNEXPECTED
### Response:
(Severity: 7), (Category: HA), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-PWR_SEQ_RECOVERY_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was not able to auto recover the memory fault condition on the indicated power sequencer device. The card might have end up into a state that the CCC driver logic could not handle. User will have to use the shell ccc_pwr_seq_upgrade tool to manually recover from this condition.), (Recommended Action: Attach to one of the RP/SC card console on the chassis that has the card with the failed power sequencer with 'attach location <loc>' command. Then run the following command manually from the shell prompt: 'chvrf 0 /opt/cisco/calvados/sbin/ccc_pwr_seq_upgrade -s <slot>' The 'slot' paramater is the backplane slot number of the card and this info can be retrieved via 'show controller ccc inventory summary' CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you configure authentication for IS-IS in Cisco IOS XR?
### Response:
Authentication can be configured at the instance, area or interface level using the 'authentication' command followed by the authentication mode (md5 or text) and the key chain. The key chain must be separately configured with the authentication keys.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an AToM instance for Ethernet over MPLS?
### Response:
To configure an AToM instance for Ethernet over MPLS, use the 'l2transport' command within the interface configuration mode and specify the xconnect parameters. interface GigabitEthernet0/0/0 l2transport
xconnect 10.1.1.2 100 encapsulation mpls
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-PON_EXIT_FAILURE
### Response:
(Severity: 4), (Category: DRIVER), (Description: An exception has occurred in CCC power-on interpreter while performing an operation.), (Recommended Action: Collect debug info from 'show tech-support ccc' command and contact your technical support representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-7-ECHO_REQUEST_DISCARD
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This indicates input packet was discarded before echo server could read it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-SEND_DATABASE_MESSAGE
### Response:
(Severity: 3), (Category: OS), (Description: A database update or dump mesage could not be sent to the other nodes.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-4-WARNING
### Response:
(Severity: 4), (Category: DIAG), (Description: Software detected an unexpected error or condition, which is not fatal to the features performance, but which may have affected a test result or similar.), (Recommended Action: Take note of the message, to see if it may explain a later test failure or similar.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-BIOS_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: BIOS running on the indicated card is reporting a warning condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNLC_FPD-3-BACKUP_ZYNQ_LOADED
### Response:
(Severity: 3), (Category: OS), (Description: The Backup image on SPI Flash has been loaded on the indicated card. The output of 'show hw-module fpd' will show the affected images with BACK IMG state. This can happen when Primary Image on Flash is corrupted, so it fallbacks to load the backup image set to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be an older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for Primary Image to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_OPERATION_SYSTEM_ERROR_SPECIFIC_NODES_HDR
### Response:
(Severity: 3), (Category: INSTALL), (Description: A system error occurred during an install operation. This may indicate a transitive problem within the system, a problem with the code or a user error not verified by the install system.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repiar' if anomalies are found. Reattempt the install operation. If the problem persists collect diagnostic information about the failure using the specific command and pass it to your TAC representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_0_FIA_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error from FIA for NPU-0 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-INFRA_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that infrastructure that shelfmgr depends on has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFINDEX_PROVIDER-3-INTERNAL
### Response:
(Severity: 3), (Category: SNMP), (Description: An unexpected internal error occurred in the ifindex subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_IFM-3-LIB_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Failure occurred in the CPP IFM Library.), (Recommended Action: *SH_CMD debug controllers pse qfp interface ifm all all * *SH_CMD show controllers pse qfp interface ATM R/S/I/P info * *SH_CMD show controllers pse qfp interface ATM R/S/I/P location < > * *SH_CMD show controllers pse qfp interface ATM R/S/I/P statistics *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-SATELLITE_SET_ALARM
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The satellite has sent a notification that an alarm has been triggered.), (Recommended Action: If the user is required to do anything, then the syslog provides some user interaction. Otherwise, the syslog is a notification that the satellite may have an issue. Further investigation of the issue can be done using the standard means.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-6-INFO_AUTH_FAILURE
### Response:
(Severity: 6), (Category: L2), (Description: PPPoE session is rejected due to authentication failure for a subscriber.), (Recommended Action: This is an informational message. Please check the reject reason and take appropriate action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-5-PLANE_UPDOWN
### Response:
(Severity: 5), (Category: FABRIC), (Description: FSDB aggregator server: fabric plane state change), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-WAIT_FOR_TARGET_NODES
### Response:
(Severity: 6), (Category: INSTALL), (Description: Install director has triggered the reload software change on the target nodes. Now it is waiting for the Install helpers on the reloaded nodes to come up and ready to receive messages.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_PD-3-MATCH_UNSUPPORTED
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The configured class-map matches are not supported.), (Recommended Action: Modify the class-map to a supported configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-2-ERR_BOARD_NOT_POWERED
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fabric card is not powered up yet. Shut it down.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM_CLIB-3-MSG_FREE_NODE_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The process has failed to free an avl tree node.), (Recommended Action: Restarting the process might help in recovering from error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-1-SVC_ALERT
### Response:
(Severity: 1), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_CONST_BP_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-1 is constantly backpressuring bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-3-MUTEX_LOCK
### Response:
(Severity: 3), (Category: OS), (Description: An Event Manager library function was not able to lock mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-LOOKUP_CACHE_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to sanitize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE-3-ERR_CSL_DLL_CHAN_CONNECT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to connect to slarp lite process channel fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-STORM_CONTROL_CONFIG_REJECTED
### Response:
(Severity: 2), (Category: FABRIC), (Description: hw-module profile npu native-mode-enable cmd needs to be configured, for hw-module storm-control-combine-policer-bw config to work.), (Recommended Action: Enable npu native mode to configure hw-module storm-control-combine-policer-bw cmd.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-PROC_SHUTDOWN_OOM
### Response:
(Severity: 3), (Category: ROUTING), (Description: LDP process exiting due to unknown/critical node memory state.), (Recommended Action: Start 'mpls_ldp' process after memory state goes normal. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIPC-6-EM_FABRIC_MEDIA_DISABLED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: AIPC fabric media is disabled in this mode and Ethernet media is enabled.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-2-ERR_SYSDB
### Response:
(Severity: 2), (Category: L2), (Description: SysDB verification registration failed), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_PLIM_SB-3-OPEN_CH_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: A communication channel could not be opened with the specified SPA. The reason for the failure is specified in the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-MA_STATE_BULK
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The Tunnel-IP MA process failed to update the state of interfaces.), (Recommended Action: Collect debugging information, remove tunnel interface, re-create tunnel interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-7-THRESH_RESET_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Error in clearing asic-error threshold for a particular error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-SEU_UNCORR_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Single event upset uncorrectable error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-MEM_ALLOC_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: The RS232 DLL was unable allocate the necessary memory it required to hold details about the TTYs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-6-REQUEST_PREEMPTED
### Response:
(Severity: 6), (Category: L2), (Description: The user external request is preempted.), (Recommended Action: Not Action requirements.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_A9K_LC_SVI-2-LOCAL_INTERFACE_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Unable to find the physical port for the given IFH), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT0_EOC
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP EOC error on the HT0 interface. HT0 EOC Error indicates that a packet has arrived to be sent on the HT link but the link is not active.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-PCI_WINDOW_NOT_MATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An software programming error has occurred after a pon-reset or process restart, device returned a different pci window base), (Recommended Action: Look into it from os sdk side)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-CPU_CTRL_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Unable to initialize CPU Ctrl device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-2-ERR_INT
### Response:
(Severity: 2), (Category: L2), (Description: Error in gatm operation. Error message here describes that the gatm method was expected to succeed, but failed as an invalid value (in parenthesis) was detected. This value is a decimal number.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-INSTORCH_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Orchestrator Agent (instorch) failed to start correctly), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-7-ERR_ECM
### Response:
(Severity: 7), (Category: SECURITY), (Description: The initial connection failed, but a retry has been successfully rescheduled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-6-IPACCESSLOGRP
### Response:
(Severity: 6), (Category: ACL), (Description: A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option and matches with the IP protocol type IGMP. This message is seen for the first match and for each match after the hit count is greater than 0x7FFFFFFF(2147483647).), (Recommended Action: This is information only message, no action required No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_NSR-3-CCI_QUEUE_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CCI queue initialization failed. %s- Function name. %d- Return value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-NULL_RXNFN_FUNC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Protocol packet path initialization failed due to no Rx packet reception function provided by protocol module. Initialization is aborted and may be retried.), (Recommended Action: Restart the protocol process. 'process restart <protocol> location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key requirements for a carrier-grade network operating system (NOS)?
### Response:
The key requirements for a carrier-grade NOS include:\n- Enabling network and service convergence\n- Seamless scalability of control, data and management planes\n- High availability through hardware redundancy, rapid failure recovery, process restartability, fast failure detection, hitless software upgrades and patching\n- Security and service flexibility\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-6-OPTICS_REMOVAL
### Response:
(Severity: 6), (Category: L2), (Description: Optics module has removed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. ltrace init failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_PREEMPT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified P2MP Sub-LSP, with specified LSP Id and destination, \ has been preempted at specified IP Address or local node. \ The first %s refers to signalled tunnel name, the second %s \ refers to Sub-LSP destination and the third %s refers to either \ the IP Address (of the remote node) or 'local node'.), (Recommended Action: None. This is a solicited message (by \ 'logging events sub-lsp preemption' P2MP destination configuration). User may verify reservable bandwidth on remote or \ local node as specified by the message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-INVALID_MRPDU_DIR
### Response:
(Severity: 3), (Category: L2), (Description: An MRPDU packet has been received but the direction of the packet is unknown or invalid. The specific MRPDU will be dropped and the protocol will continue to operate.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-SFPPLUS_ACCESS
### Response:
(Severity: 4), (Category: L2), (Description: Software reset the optics module as it could not read or write to it during initialization.), (Recommended Action: None. Software corrected the issue by power cycling the SFPPLUS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_DYNAMIC_TYPE_CHECK_FAILURE
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE_ERR_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE_ERR_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8111-2-DEVICE_INTERNAL_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There was an internal failure reported by the PCIE device), (Recommended Action: This error is a momentary error and software should be able to correct it. If this error persisted for a period of 60 seconds, please perform the following actions: 1. Please check for read/write access to the attached compact flash or eUSB device by creation a temporary file. 2. If the problem still exists, please reload the board using the following command: 'reload location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-CHKPT_REMARK_PULSE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occuring while trying to send a pulse to the MRIB main thread during remarking of FGIDs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BGP_UNREG_NOTIFY
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to unregister for notification of BGP convergence. The error will not affect IS-IS operation but does indicate unexpected system behavior.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV6_EA-5-DEBUG
### Response:
(Severity: 5), (Category: PLATFORM), (Description: DNX IP-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Zl30160_ERROR-3-ERR_MMAP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in ClkCtrl driver due to memory map failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP path MTU discovery?
### Response:
To configure RSVP path MTU discovery, use the 'rsvp mtu-discovery' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp mtu-discovery
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FGID_DB-3-INFRA_FGID_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A internal error was detected while using Fabric Multicast Group Indentifier(FGID) resource managing infrastructure APIs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-ALREADY_THREADED_MSG
### Response:
(Severity: 3), (Category: MGBL), (Description: attempt is made to re-add a node in internal data structure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-4-ASYNC_ABORTED
### Response:
(Severity: 4), (Category: IP), (Description: The socket library aborted a socket because of system instability.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR1_INTR_PKT_EOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR1_INTR_PKT_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-2-LINK_STATE_CHANGE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: When the process starts, port state oscillate between up and down and finally the port state will become up. While configuring also port link state change message information displayed. Except the above two scenarious, if port state change occurs please contact TAC support.), (Recommended Action: Please restart the process 'process restart ce_switch' and verify the port state 'show controller switch ports location all'. If it not recovered please collect (admin)Show tech-support control-ethernet and contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-ALL_FANTRAYS_MISSING
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There are no fan trays plugged into the chassis, chassis cooling is non-operational, and chassis ambient temperature and card temperatures may rise to over temperature conditions.), (Recommended Action: Install one or more fan trays, one fan tray will run at full speed by default, two will run at computed speed based on ambient temperature, give CLI: (admin)# show env --> all sensor output (admin)# show env trace --> to see cards shutdown temperature threshold (STT) values Specifically look at temperature sensors output, can refine the scope of output with (admin)# show env temp. As temperatures rise, over temperature and shutdown conditions may occur.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NSR_PACKET-3-ERROR_TRACE_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message tells is the ltrace initialization for error traces has failed and prints the error string.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-3-DATAPATH_CONTROL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-4-SKIP_RELOAD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Since the reload is already in progress, there is no need to create a reload thread again in case if the connectivity to DSC rack or the last fabric rack is lost.The system should come up after the current reload.), (Recommended Action: This is warning message as the current reload is being skipped, since the system is already in reload.Verify the system is back up in working state after the reload. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPFPGA-3-SI5342_I2C_ACCESS_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5342 access Failure/Success while accessing.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-FAILEDREGCOMP
### Response:
(Severity: 3), (Category: MGBL), (Description: The regex operation failed for some reason. This may lead to parser errors. The possible causes are a regex compilation failure or a memory allocation failure. If the failure shows up during memory allocation , please check memory status for router.), (Recommended Action: Collect 'show parser trace parsing' output, and open a DDTS report.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_GET_RELATIVE_PATH
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not get a required view path for file. This is the view that pkgfs uses, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-INVALID_VC
### Response:
(Severity: 3), (Category: L2), (Description: Dangling VC found. Possible reasons: VC deletion failed in previous attempt or LMI did not get a deletion notification from Interface Manager VC = Virtual Circuit LMI = Local Management Interface IDB = Interface Descriptor Block), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_LIB-7-ERR_DEBUG_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug. The facility to debug the component may not work.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-ERR_INET_NTOP
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: A call to inet_ntop failed on first attempt.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
flash_platform-7-HDD_MODEL_ID_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Filesystem return only string format model id. We maintain an exhaustive list of un-supported Hard Drive Disks. Compare our model against this list. If this node's model id is in the un-relible list. This implies disk is unreliable.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-IFINIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPF failed to initialize data structures for an interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show ospf interface <intf name> - show running-config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-SYSDB_BLOCK_DETECT
### Response:
(Severity: 3), (Category: OS), (Description: SSM process detects sysdb is not available. It will restart and configuration will be ignored until sysdb comes back.), (Recommended Action: Collect system log information for the sysdb. Collect show tech sysdb, show tech ssm 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-3-GET_HW_IF_KEY_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: A failure occurred when attempting to obtain the hardware interface key for this interface, after multiple retries. No Linux representation of this interface will be created, which may cause inconsistencies between IOS-XR and Linux state.), (Recommended Action: This error is most likely to occur during router reload, when attempting to instantiate multiple virtual interfaces. Changes to interface state, MAC or IP addresses may cause the Linux representation to be recreated successfully. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-REP_COM_REMOVE_STARTED
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that install remove inactive all as part of the replace operation has been started.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_ENDBULK
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-MUNMAP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Memory unmap of a particular chunk failed.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-ADJ_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Platform IPv6 FIB, adjacency error), (Recommended Action: Please collect the console log and following traces: show cef trace loc <> show cef platform trace [common|ipv6] all loc <> show adjacency hardware trace loc <> show bundle trace all loc <> show im trace loc <> Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-ERR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in NP Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-7-CSPF_NO_PATH
### Response:
(Severity: 7), (Category: OS), (Description: No path found.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMS-3-LIST_UNDEFINED
### Response:
(Severity: 3), (Category: MGBL), (Description: Trying to configure a method list in the line configuration that is not defined in AAA), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-EVM_ASYNC_ATTACH
### Response:
(Severity: 3), (Category: IP), (Description: The IPv4 MA process could not register the handler for the indicated event. This can happen when the process is (re)starting. The process recovers by restarting itself. If the error message doesn't persist, it can be ignored. If the error message persists, some basic ipv4 functionality may not be available.), (Recommended Action: Collect the output of show tech-support, show processes, show ipv4 ma trace, debug event-manager attach job <> from the location the error message comes from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-NO_DATA
### Response:
(Severity: 3), (Category: ROUTING), (Description: The data needed for the specified OSPF show command was not available. This would occur for non-critical data such as trace or debug information.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-EXCESS
### Response:
(Severity: 7), (Category: MGBL), (Description: There were more tokens entered as part of the command string than are required for the command.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_IP_ARM_BATCH_UPDATE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register with IP-ARM for notification of the address changes on the specified interface and address family. This may be an internal commuincation error, but is most likely to be a resource starvation problem.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider disabling and reenabling the interface within IS-IS configuration, or restarting the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APM-6-CFG_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message notifies user to cold reboot the line card to make the new configuration effective.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-ISSUL_CLIENT_BIND_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: The call from ISSU Lite to bind to the ISSU Library service is asynchronous to the calls ISSU Lite registration APIs, so there is no direct path to return an error to the client. This error message indicates that a fatal error has occured in the ISSU Library, either as a result of a programmatic error or misuse of the ISSU Lite service.), (Recommended Action: If the client is essential to the ISSU operation, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Otherwise retry the operation and / or proceed with the ISSU. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-7-RCV_OWN_MSG
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_PM_TEST-3-ERROR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: sip_pm_test encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.), (Recommended Action: This is a test software for internal use. So, there is no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-3-SYSMGR_SOCK_FEAT_START
### Response:
(Severity: 3), (Category: L2), (Description: The cHDLC socket feature unexpectedly failed to be started by sysmgr. This may mean that processes which use cHDLC sockets to send and receive packets will be unable to do so, and may not be working correctly. Symptoms would include loss of SLARP keepalive packets causing the line state to go down, loss of CDP packets and loss of LACP packets on cHDLC encapsulated interfaces.), (Recommended Action: The problem can be fixed by manually starting the cHDLC Socket server process on the affected node using the command 'process start chdlc_socket location <location>'. The command 'show process chdlc_socket location <location>' will indicate the state of the process. Once the socket server process is running, no further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-3-SYSMGR_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The Verification Daemon failed to inform SysManager of it shutting down due to removal of configuration. This is not a fatal error but should be investigated all the same as it may cause the process to restart when no configuration is present.), (Recommended Action: The Verification Daemon may exit cleanly, in which case no further action is required. If the Verification Daemon continues to run, or restarts unexpectedly, gather the output of 'show tech-support sysmgr' If the error message indicates a potential out of memory condition Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPT_SUB-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an severe error message in the DPT module to indicate that an error was seen during init operation.), (Recommended Action: Please collect the console log, DPT traces (show dpt trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_HIGH_VOLT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when one of the voltage sensors on satellite has crossed higher threshold.), (Recommended Action: Please)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ZEROHOLDTIME
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has received an IIH containing a zero holdtime from a neighbor with which no adjacency currently exists. The IIH has been discarded. The message indicates the interface and, in the case of a LAN interface, the SNPA from which the IIH was received.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-3-MEMORY_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error indicates memory allocation gets failed. No action is required as the software should be able to recover from this error.), (Recommended Action: Please collect the logs mentioned below: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. 'show log location <r/s/i>' 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-ENTRY_EXISTS_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Attempt to add NP entry that already exists.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to display the current boot variables in Cisco IOS XR?
### Response:
To display the current boot variables, including the configuration register setting, use the 'show variables boot' command. RP/0/RSP0/CPU0:router#show variables boot
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ASIC_ERROR_ACTION
### Response:
(Severity: 3), (Category: FABRIC), (Description: If hard-reset action is observed, then hard-reset of asic will be done, In case of pon-reset action, board reload will be triggered.), (Recommended Action: If ASIC_ERROR_ACTION with HARD-RESET is seen continuosly, after threshold number of ASIC resets (default threshold = 5), the board will be reloaded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-RSI_TABLE_ID_WARNING
### Response:
(Severity: 4), (Category: ROUTING), (Description: Unable to get rsi table id for the reason specified.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPCP_SRVR-3-SW_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A fatal software error encountered during IPCP Server process initialization. The specific error and cause are appended to the error message. Process will be terminated. Node can't function properly and will be reset.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_TS_CORE_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-0 timestamp core error on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM_PLATFORMS-2-ERR
### Response:
(Severity: 2), (Category: L2), (Description: Error in cem operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-6-ASYNC_XIPC_THROTTLE
### Response:
(Severity: 6), (Category: IP), (Description: The socket library encountered a throttle condition, when operating on an XIPC queue. This might place the socket connection in an inconsistent state. The condition may be temporary, but if it persists, please collect the necessary information.), (Recommended Action: The condition may be temporary, but if it persists, please collect the necessary information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-INVALID_FILENAME
### Response:
(Severity: 3), (Category: IP), (Description: The given filename is chekced againist '../' from getting around the directory restrictions.), (Recommended Action: Check the filename given for download. Also please give the entire pathname of the file to be provided,relative to the TFTP home directory.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-TIMEOUT_RESET_LIMIT
### Response:
(Severity: 7), (Category: INSTALL), (Description: The maximum number of time extensions to the current install command have already been granted, so the current request for an extension is denied.), (Recommended Action: No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-ERR_GASPP_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The sfe-drvr process cannot initialize the infrastructure allow read/write access to the POD registers on the fabric card.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-FOUND_SCRIPT_NOT_PERMITTED
### Response:
(Severity: 4), (Category: INFRA), (Description: XLNCd runs scripts on router start up and when to XR EXIs are created. A script was found in the exi or init directory which did not have correct permissions to be executed.), (Recommended Action: If this script was intended to be run, ensure that it is owned by root or XLNC, is readable and executeable by the owner, is not writeable or exectuable by anyone other than the owner, and is a regular file. Then restart the XLNCd process. If the problem persists through process restarts, If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZENJF-4-DBG_JUMPER_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The debug jumper on Satori RP base board is set. The system will not conform to functional specification if the jumper is set. This is used for debug purpose only. It should not be set on a production system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FC_FPGA-4-INTR_SET
### Response:
(Severity: 4), (Category: FABRIC), (Description: An indication that an interrupt was raised on the IPU fpga on the FC.), (Recommended Action: NONE)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-5-ERR_DEV_NOT_FOUND
### Response:
(Severity: 5), (Category: FABRIC), (Description: The FIA driver is polling for the device.), (Recommended Action: If the message appears once and then stops, there is no cause for concern. If it persists or if fia_driver gets respawned by sysmgr for not returning EOI, then this could indicate a problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH_CLIENT-3-GEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with EPM SWITCH server process. It may be caused due to invalid api arguments by client processi, or a transient condition while the server process is respawning from crash, or the EP SWITCH hardware does not respond to inquery.), (Recommended Action: This message may indicate a transient condition while the EPM SWITCH process is booting up. Please check if the error message is seen continuously even after the EPM SWITCH process reached Run state. please contact tech-support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_SBE_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA00 channel FIFO single bit error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVENTORYCI-3-INIT_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occured during the initialization of the process.), (Recommended Action: Restart mibd_entity)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTSDRVR-6-OTS_OTDR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates an OTDR information), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STUB_ACL_EA_TEST-3-ERROR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-BOOTUP_FAULT_INJECTION
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: display warning messages), (Recommended Action: Try to assess the failure cause by looking for warning messages prior to this one by using 'sh logging. Also take the logs using this following wiki http://wiki-eng.cisco.com/engwiki/CRS_20FPD)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: An error occured in the event loop.The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-5-TABLE_NH_DAMPED
### Response:
(Severity: 5), (Category: ROUTING), (Description: This notification indicates that there is atleast one nexthop in this RIB table that is getting damped.), (Recommended Action: *DEBUG*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_RE_INIT_ASIC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver re-initialization of all ASICs and recover failed. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_CLI-7-BUFFER_MISMATCH
### Response:
(Severity: 7), (Category: HA), (Description: A NULL pointer was encountered unexpectedly.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-5-COMM_INIT_FAILED
### Response:
(Severity: 5), (Category: LICENSE), (Description: Smart Agent could not initialize communication with the Cisco licensing service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'ip ospf priority' command?
### Response:
The 'ip ospf priority' command sets the OSPF priority of an interface. The priority is used in the designated router (DR) and backup designated router (BDR) election process. The router with the highest priority becomes the DR, and the router with the second highest priority becomes the BDR. Setting a priority of 0 makes a router ineligible to become the DR or BDR. This is useful for controlling which routers become the DR and BDR on a multi-access network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does SysDB collaborate with Configuration Manager in IOS XR?
### Response:
SysDB collaborates with Configuration Manager in IOS XR by storing the configuration data and notifying relevant processes when configuration changes occur. Processes can register with SysDB to be notified of specific configuration changes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISAKMP-3-DBG_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An debug init/fractL call failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MLACP_CONNECT
### Response:
(Severity: 6), (Category: L2), (Description: An mLACP connection has been established to the specified device.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_LIB-4-RSRC_LOW
### Response:
(Severity: 4), (Category: L2), (Description: The l2fib_mgr process has detected that average utilization for specified resource has risen above a predefined high watermark value, and has entered resource contrained forwarding mode. In this mode, the l2fib will only handle route deletes which may potentially freeup some memory. Due to this operational mode, the L2VPN mgr/AIB/L2FIB and L2FIB will be out of sync. Once ACs are deleted and resource utilization level drops to acceptable levels again, l2fib will come out of this operational mode and resume normal operation.), (Recommended Action: Run show l2vpn forwarding resource command and check which resource(s) are running low on memory. Any action that reduces number of ACs will eventually result in the l2fib returning to normal operation after few seconds.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-6-RECOVER_FAIL
### Response:
(Severity: 6), (Category: OS), (Description: SSM Process took a recovery action, but service is not responding), (Recommended Action: Collect system logs. For mentioned pid collect show process <pid> and follow process <pid>. Collect show process blocked and show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-6-READY
### Response:
(Severity: 6), (Category: OS), (Description: Procfind was unable to inform System Manager that it has finished initializing and is ready to service request. Procfind ignored the error and continued normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOS_PORTS
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-PUF_INVALID_TOKEN_TYPE
### Response:
(Severity: 3), (Category: OS), (Description: This indicate invalid token type detected in timezone configuration file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-VERSION_NOTCOMPATIBLE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_SORT_NODE_TABLE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not sort required all nodes, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-NON_RECOVERABLE_SOFT_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: PRM has detected a non-recoverable soft error on NP %d. The linecard will be rebooted.), (Recommended Action: Fatal error. Reboot linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card. - Failed to initialize objects. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-CLIENT_STATS
### Response:
(Severity: 7), (Category: SYSDB), (Description: A SysDB server process was unable to update a per-client statistics counter for one of its clients. This is an unexpected condition, though has no effect on router operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-4-CHKPT_REGISTER_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Encountered a checkpoint register failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-DBG_REG
### Response:
(Severity: 3), (Category: OS), (Description: An error occured whilst PlaceD tried to register with debug infra.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-SYSDB
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified error happened during the interacton with the system database.), (Recommended Action: Please collect output of the following commands: show platform show platform vm show log show process blocked location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-TOD_NOT_SPECIFIED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TOD type need to be specified in gps-input), (Recommended Action: Specify TOD type in gps-input CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_EA-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The Interface EA encountered an provisioning warning.), (Recommended Action: No action is required as the software should be able to recover from this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_1_XAUI_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error - 1 from XAUI on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IM_ATTR_REGISTRATION
### Response:
(Severity: 3), (Category: L2), (Description: CDP registration for duplex change notifications failed. This means that duplex information will be missing from outgoing CDP packets), (Recommended Action: Try restarting CDP ('proc restart cdp location <location>'). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the edpl_ma process using the following command: - process restart edpl_ma)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-RPKI_SSH_KILL_ERR
### Response:
(Severity: 5), (Category: ROUTING), (Description: ssh_xr process could not be killed. No action required.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_9
### Response:
(Severity: 3), (Category: IP), (Description: The network as specified by the SSMO option is not configured on the LMA.), (Recommended Action: Configure the network under LMA or Customer configuration as applicable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_CLEAR_CTR-6-FAILED
### Response:
(Severity: 6), (Category: QOS), (Description: The QoS EA process encountered the specified error during Clear Qos Counter execution. With this message clear qos counter will not clear the hardware counter. The failure might be becuase of no memory avaible. Please reexecute the CLI clear qos counter. If you see the issue please follow the recommended_action.), (Recommended Action: Collect the outputs of 'show qos-ea trace all location <location>' and 'show process all location <location>, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-SCHED_PRIORITY_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver was unable to raise the priority of the interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-HEARTBEAT_FAIL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Periodic sanity heartbeat messages from the reported node have not been received. The shelfmgr will attempt recovery by resetting the affected card or automatically attempting RSP failover if needed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabric driver was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-4-WARN_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The VRRP process failed to initialize correctly. In this situation VRRP restarts, but VRRP may not recover if there is a persistant error in the IOSXR system and VRRP is later unable to reestablish its connections and initialize successfully.), (Recommended Action: If VRRP does not restart and automatically recover, do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUMP-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when accessing the system database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-WINDOW_MUTEX_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Mutex lock/unlock failure has occurred for a shmwin open/close operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx - show shmwin trace all location 0/x/CPUx - dumpcore running shmwin_svr location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-HIGH_LASER_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP laser bias greater than or equal to the high laser bias warning threshold. The SFP is the pluggable optics on the line cards. The laser bias threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-6-INSTALL_NUM_PCAP_DEL
### Response:
(Severity: 6), (Category: INFRA), (Description: Capture sessions have been removed to remove all linux interfaces as part of a restart for XLNC.), (Recommended Action: Please wait for XLNCD to restart, then setup your capture session.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIER-2-PCIE_1_ROOT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCIE error detected in Root Complex 1), (Recommended Action: Please correct the problem by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_DLIST_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the datalist to be returned has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_EVC_NOTIFY
### Response:
(Severity: 4), (Category: L2), (Description: During initialization, SSRP failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-IO_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error has occurred during a socket operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process msdp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process msdp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mdsp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mdsp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-IF_IS_PART_OF_LS
### Response:
(Severity: 3), (Category: L2), (Description: Unable to add interface because it is part of a openflow logical switch. Remove this interface from the switch to proceed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_RESTORE_DEBUG
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_iterate_* failed while iterating through the chkpt list.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-DST_UPDATE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The SPAN MA was unable to record a change to the destination interface for the specified session. It is likely that traffic will not be replicated to the desired destination. Standard forwarding will not be affected. Use 'show monitor-session status' to identify the set of affected interfaces and to provide more information about their current state.), (Recommended Action: This message is likely to indicate a system resource issue, or an internal inconsistency within the SPAN MA. Attempt to resolve any resource constraint issues before attempting to solve the problem. Once such constraints are resolved, issue 'process restart span_ma' on the node with the affected source interfaces. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-EBS_RGMII_PAR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: EBS RGMII parity error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-6-BINDING_DELETE
### Response:
(Severity: 6), (Category: IP), (Description: A binding has been gracefully deleted.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-INCORRECT_VSIM_VERSION
### Response:
(Severity: 4), (Category: DRIVER), (Description: Virtual Interface Mac pool start/end address has been configured in Chassis prom. This will provide the Mac addresses required in XR VM.), (Recommended Action: Use idprom_tool to upgrade the backplane IDPROM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-2-CONSUMER_INIT
### Response:
(Severity: 2), (Category: MGBL), (Description: A failure occurred during the initialization of ENS library or during NRS class creation. This probably indicates an underlying more severe problem.Internal failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_TSF_SOT_MISS_ERROR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_TSF_SOT_MISS_ERROR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-REGISTER_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process failed when attempting to register its external data manager with SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-4-CPU_NOLATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Errors observed on the system controller CPU module for which information may be lost due to other errors. A reason text will be supplied.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PARTICLE_QNET_POOL_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Qnet pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-RECOVERED
### Response:
(Severity: 3), (Category: MEDIA), (Description: The NVRAM device corruption fixed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-6-FILE_ACCESS_ERR
### Response:
(Severity: 6), (Category: IP), (Description: The given file could not be accessed due to reasons specified.), (Recommended Action: Check if the file being requested exists, and has the correct read-write permissions.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-EVENT_ASYNC_ATTACH_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in event async attach call.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can BGP be used to migrate from one ISP to another with minimal downtime?
### Response:
BGP can facilitate ISP migrations with minimal downtime by allowing routes to be selectively advertised to the old and new ISPs during the transition. The local preference can be manipulated to prefer the old or new path. AS path prepending can be used to influence inbound traffic. Communities can also be used to control advertisement of routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON_FAN_ALGO-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in Envmon, but there is not corresponding error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_REPROG_RESOURCE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and need reprogram resource.), (Recommended Action: An error that causes reprogram resource has happened and been handled Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV_DPM-4-UNFINISHED_DPM_RUN_NOTIFICATION
### Response:
(Severity: 4), (Category: ROUTING), (Description: During an iteration of DPM did not complete the sending of all requried requests. The text of the message indicates how many requests we unsent, and how many are awaiting a response. This fault may be due to overly aggressive rate limiting.), (Recommended Action: Check the LSPV DPM process and LSPV Server process for scale based anomalies. If none exists, re-evaluate the configured rate limit for DPM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_IPV6_EA-3-ERROR3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DNX IP-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_EA-3-ERROR_DETAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was detected in the Platform SPAN module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support span<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support span<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-7-EVENT_CREATE
### Response:
(Severity: 7), (Category: IP), (Description: In a telnetd session, creation of event manager failed . Internal error.), (Recommended Action: Internal error. Restart telnetd process to overcome.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5346_DEVICE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5346 clock device in reset or recovered), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_MPLS_EA-3-ERR_MEM_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> show memory location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EES-2-ECONN_DISABLED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EES critical error.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-ERR_BAD_SESSID_ATTR
### Response:
(Severity: 6), (Category: SECURITY), (Description: Check consistancy between radius_table and nas_to_daemon_av_table), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-TFTP_INFO_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The TFTP information is unavailable. The MBI operation in progress may not be carried out. %s - indicates the node on which the error occurred. %s - gives the error message.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_VLAN_EA-3-CONFIG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This particular configuration is not supported on this platform), (Recommended Action: Please capture the complete error log. Please check the data sheet for the supported configuration. Please contact TAC for any support on this)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-WAIT_ON_SIGNAL
### Response:
(Severity: 3), (Category: MGBL), (Description: The exec launcher waits on a signal from the TTY server before continuing. The signal was not successfully received.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the package manager process in IOS XR?
### Response:
The package manager process is responsible for managing the installation and removal of software packages on the router. It works closely with the instdir process during installation operations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-PAK_NETIO_RETURN_BUFFER
### Response:
(Severity: 6), (Category: OS), (Description: Failure encountered in drop count of netio packet.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-4-ERR_INIT
### Response:
(Severity: 4), (Category: IP), (Description: A failure occurred during the initialization of the process. This may have resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_AIS_DEMD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_DLL_UNKNOWN
### Response:
(Severity: 3), (Category: MGBL), (Description: 'An error occurred when trying to open the dll library specified in command tree. This failure will cause the command tree unload.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-PDMA_RAM_UNCORRECTABLE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates an uncorrectable multi-bit error occurred on this internal SRAM. %s - name of ram that error occurred %x - key of error node recorded %s - error data), (Recommended Action: if this happen continous, reload the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-GEN_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered an Error in operation. The error string updates the reason for this error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-6-CLEAR_COUNTERS
### Response:
(Severity: 6), (Category: MGBL), (Description: Counters on one or more interfaces have been cleared by the user. This message is for information only.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-5-SERVER_INIT_LTRACE_FAILED
### Response:
(Severity: 5), (Category: OS), (Description: 'Ltrace utility registration failed.' 'Ltracing functionality may not work properly.' 'IMDR will proceed without fail.'), (Recommended Action: 'Restarting the process may resolve the issue.' 'If the problem persists after some tries, contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-DELPATH
### Response:
(Severity: 3), (Category: ROUTING), (Description: An attempt was made to delete a path from a net with a path count of 0), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-4-PORT_INIT_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Port will not operate reliably), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ASIC_READ_ACCESS
### Response:
(Severity: 6), (Category: FABRIC), (Description: This indicates a failed access to the ASIC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-7-ERR_NODEID
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This message indicates a failure in extracting fields from the node ID. Inventory information for the specified node ID, if valid, would be incomplete. This would affect information provided to CLI 'show inventory', inventory schema, and the entity related MIBs for the specified node. %s - indicates the internal error.), (Recommended Action: Try restarting the invmgr process via CLI 'process restart invmgr' to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_OBJ_LIB-4-DEBUG
### Response:
(Severity: 4), (Category: PLMGR_OBJ_LIB), (Description: The policy manager ui library debug(s) could not be initialized. The is a non-fatal error and should not affect the normal functioning of the system. The only effect of this error will be that the policy manager ui library debugs may not show up .), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_1_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CLIENT-3-GEN_ERR_2
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered an Error in operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-PUF_CFGSTR_LOOKUP_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This indicate a format error in timezone configuration file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-INVALID_SWITCH_TYPE
### Response:
(Severity: 3), (Category: INFRA), (Description: Indicates that ESD process is running on unsupported node/card_type.), (Recommended Action: Determine the board type (version/revision) to make sure that its of supported HW. If this is a supported type, then root cause has to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABVQI-0-CARD_UNSUPPORTED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The card cannot be booted with the applied fabric config. Please remove fabric mode config and reboot the card.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-7-ERR_SYSDB_EDM_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID allocator was unable to become an external data manager (EDM) despite having a connection to SysDB. The operation will be retried. The FGID component and the System should continue to function as normal, with the exception that the 'show' commands for FGID allocator will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-EDM_DATALIST_ADD_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to add an item to SysDB data list.), (Recommended Action: Please include the output of the following commands: - show tech-support lpts - show tech-support sysdb - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICEMGR-3-CHIPGUARD_FAILURE
### Response:
(Severity: 3), (Category: LIBRARY), (Description: NPU chipguard validation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_9_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_BAT_FAL_A
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Battery Failure A (SAT_BAT_FAIL_A) alarm is raised when the battery A fails. This could be because the battery is removed or is not operational.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_1_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD-3-CAPS_ADD_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Forwarder was not able to add this encapsulation to the forwarder interface. This will effect the traffic of this protocol type going to/from fabric.), (Recommended Action: Based on the type of error, restart of forwarder or ifmgr process might help in the capsulation addition to the interface. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ADDRESS_DUPLICATE
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) has detected an attempt to configure and use an IPv6 address already in use elsewhere on the media. This may result from misconfiguration or from transient ND packet loopback.), (Recommended Action: Remove the affected address from its interface, and configure a valid address in its place. If the address is of link-local scope, restart the interface using the configuration commands: <CmdBold>interface [interface-name]<noCmdBold> <CmdBold>shut<noCmdBold> <CmdBold>commit<noCmdBold> <CmdBold>no shut<noCmdBold> <CmdBold>commit<noCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-0-SOFT_ERROR_RELOAD_RECOVERY_1
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Soft error detected on bridge FGPA instance 1. Card will be reloaded to cover from this error.), (Recommended Action: Soft error are very rare due to Cosmic and other environmental factors. The probability of soft error on same device again is extremely low. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-SLEEP_ON_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in FIB platform to indicate that engine layer identified an error while programming an object in h/w and thread is sleeping to avoid wrapping of FIB trace buffers. This message will never be seen on customer router because by default flag to hit this sleep condition will be false.), (Recommended Action: Please collect the console log and contact fretta-fib-triage to triage it further.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-3-CONFIG_VERIFY
### Response:
(Severity: 3), (Category: OS), (Description: The sysdb 'backend_verifyonly' function returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-6-LOG_INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABVQI-2-VQI_CRIT_LIMIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric VQI allocation has reached Critical Limit of 80 percent. Line cards will be shutdown if VQI allocation is exhausted. Collect show controller fabric vqi assignment all output), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-6-SPARULE
### Response:
(Severity: 6), (Category: L2), (Description: Either an unsupported SPA was inserted, or an error occurred when a full rate SPA and another SPA tried to use the same SPA bridge controller resources. This is not allowed due to bandwidth limitations. SPA bays 0 and 2 share one controller, and SPA bays 1 and 3 share a second controller.), (Recommended Action: Both in the case of unsupported SPA type and exceeding bandwidth resources, the newly inserted SPA should be physically removed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-RANDOM_DETECT_RANGE_MAX
### Response:
(Severity: 3), (Category: QOS), (Description: Configured random-detect maximum threshold exceeds the allowed maximum threshold), (Recommended Action: Please adjust the random detect threshold)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-5-ERR_ASIC_PARITY
### Response:
(Severity: 5), (Category: FABRIC), (Description: In the specified block a parity error encountered at mentioned addr offset. If the error exceeds its threshold, the driver trigger a corrective action which may include device reset or MSC reload.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-DLL_LOAD_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: This message indicates that a process could not find the specified DLL name. The name of this DLL is included in the message. Functionalites of the process that failed to load this DLL will be impacted.), (Recommended Action: This indicates the problem with DLL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-CHASSIS_COMPLETED_MIGRATION
### Response:
(Severity: 4), (Category: DRIVER), (Description: Chassis has exited migration mode and is not in 1T or 2T fabric mode. Any new card insertions that violate the fabric compatibility mode may not be allowed to boot.), (Recommended Action: No action needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_8_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-GET_CLINFO_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Matching clinfo could not be obtained for the given server handle.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-ETH_SERVER_DISCONNECTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that shelfmgr is now disconnected from the eth_server process and is therefore not capable of receiving heartbeats (in the case of the Heart Beat thread) or boot requests (in the case of the boot thread).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-THERMAL_BW_SHAPING_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The NPU driver attempted to set bandwidth shaping to control the NPU temperature, but the API failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth max and min feature?
### Response:
The MPLS TE auto-bandwidth max and min feature specifies the maximum and minimum bandwidth values that auto-bandwidth can request for a tunnel. The max value limits how high auto-bandwidth can adjust the tunnel bandwidth, while the min value specifies the lowest bandwidth auto-bandwidth can request. These values constrain the auto-bandwidth adjustments.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-ACCT_MSG_TX_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: An error occurred while attempting to send an accounting record to the external AAA server), (Recommended Action: 'Check AAA connectivity, otherwise contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. with the exact error message seen')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP MED attribute?
### Response:
The multi-exit discriminator (MED) is an optional attribute that suggests to an external AS the preferred path into the local AS when there are multiple entry points. A lower MED is preferred.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-WARNING
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: iq manager encountered an error and is not able recover from the error. A reason text will be supplied call support with this text. Some of the functionality may not work until this error is removed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-EBS_CPU_LP_TAIL_DROP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Egress Buffer and Scheduling to CPU low priority tail drop.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2LIB-7-MUTEX_LOCK
### Response:
(Severity: 7), (Category: MEDIA), (Description: A required mutex lock failed.), (Recommended Action: Contact customer support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ILLEGALENTERSTR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The enter string is illegal. The calling function and enter string and command are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-INTF_BUNDLE_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing something related to a bundle interface such as underlying interface add/remove or registration with IIR This is a fatal error related to the bundle interface that is being processed. The processing of underlying interface or the bundle itself will be aborted), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-SYSDB_UNBIND
### Response:
(Severity: 3), (Category: OS), (Description: Unable to unbind from sysdb.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-7-ASMP_ERR_REGS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Details about the error observed on the PCI bus with Atlantis system controller.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-6-EDM_REGISTER_FAILED
### Response:
(Severity: 6), (Category: IP), (Description: The ipv6_io process failed when attempting to register its external data manager with SysDB.), (Recommended Action: Restarting ipv6_io may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTQ1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_MEM_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected an input memory error on link 3), (Recommended Action: This alarm is transient and should auto-clear when error condition is resolved. If the alarm doesn't clear, then please reload the card using command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-IMPORT_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the import thread. If this occurred during process startup, then the process may be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-TX_CH_HI_PWR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high power on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption in the downstream.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP on Cisco IOS XR?
### Response:
To configure BGP, use the 'router bgp' command in global configuration mode. RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)#router bgp 65000
RP/0/RSP0/CPU0:router(config-bgp)#neighbor 192.168.1.2 remote-as 65001
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-0-LC_NP_LOOPBACK_FAILED_TX_PATH
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This line card has detected a problem with the packet punt and injection path between this line card CPU and some network processor(s), and the consecutive failure count has reached or crossed the failure threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_VERSION
### Response:
(Severity: 4), (Category: ROUTING), (Description: Bad protocol version (VERSION, should be EXPECTED-VERSION) from SOURCE_IF. This system received a pdu with an invalid protocol version of VERSION instead of EXPECTED-VERSION. The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-7-L2_HASH
### Response:
(Severity: 7), (Category: ROUTING), (Description: CLNS failed to initialize the L2 hash function. It's an internal error.), (Recommended Action: Please contact cisco-support with the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-START_PACKAGE_CLEAN
### Response:
(Severity: 6), (Category: INSTALL), (Description: Status information cleaning old package information prior to sync'ing a node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-SQUID_ERR
### Response:
(Severity: 3), (Category: L2), (Description: squid fails to find the device), (Recommended Action: 1. reseat the plim. 2. if the problem is still there after reseating, run diag on the plim)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_DEBUG_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRMS-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Error occured during SRMS initialization. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Restart SRMS process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC17
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while attempting to create an event manager. This failures affects the ability of the process to service various messages / pulses from other threads / processes. This facility is deemed crucial and the process automatically restarts on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-UPD_MSG_TOO_BIG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An update to FIB is too big to be transmitted, the affected route will be missing or stale in FIB, drops or mis-forwarding may occur for the destinations matching the affected route.), (Recommended Action: Try to reduce the number of next-hop paths for the affected route. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_INVALID_RESP
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSH encountered some invalid error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-OPTICS_OIR_QUICK_BACK_TO_BACK_ERROR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The OIR operation was performed quickly. Recommendation is to wait for 10 second before doing next Optics OIR.), (Recommended Action: Recommendation is to wait for 10 second before doing next Optics OIR. If the issue occurs under other conditions, such as when Optics OIR was not performed within 10 second of being inserted, then copy the error message exactly as it appears on the screen and collect console log and the following information. Contact your technical support representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-4-SAT_SPEED_DUP_UPGRADE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a notification to user that the speed / duplex parameters of a particular port set to auto negotiate has upgraded post negotiation from its minimum capability due to either higher capability of the peer or the the peer not able to engage in auto negotiation.), (Recommended Action: This might require some manual config changes for other dependent features such as Sat QoS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_DARK_BW_CHASSIS_CFG_CHANGED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with reloading the chassis.), (Recommended Action: System is inconsistent. Need to reload chassis for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-CPU_PKT_LTH_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: IBS from CPP packet length mismatch.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_STATIC-6-ERR_CONN
### Response:
(Severity: 6), (Category: ROUTING), (Description: MPLS static process could not connect with a manager.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOL_MAPPERE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-IM_CAPS_DATAPATH_CONTROL
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when calling datapath control function for the capsulation.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-DEBUG_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process try to do debug related initialization.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-PLIM_NOT_POWERED_UP
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Server was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-4-LOST_RACK
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Connectivity to the given rack is lost. We are expected to reload in case if the lost rack is the DSC rack or the last fabric rack.), (Recommended Action: This is a warning message, as the system will reload itself. Verify the system is back up after the reload. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP route filtering using prefix-lists in IOS XR?
### Response:
BGP route filtering using prefix-lists in IOS XR is configured with route-policies that reference the prefix-list for matching routes
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-INVALID_SLOTID_IN_BOOTREQ
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the slot Id in the boot request from rommon to shelfmgr is invalid, therefore ignore the boot request.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWXML-4-WARN_BAG_REG
### Response:
(Severity: 4), (Category: SNMP), (Description: Failed to register the bags with SysDB. The access to SNMP statistics and MIB items in /oper/snmp/info through 'sysdbcon' might not be available. This is likely due to an internal software error.), (Recommended Action: Restart snmpd process.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-3-STBY_SYMLINK_NOTYET
### Response:
(Severity: 3), (Category: MEDIA), (Description: Syncfs noticed that required symbolic-links to the standby card, is not published yet. Syncfs will get notified when they are available.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SKT_ECTW_RDATA_ACKERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-6-LOOPBACK_LINE_UNSUPPORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Loopback Line is not supported with Copper optics.), (Recommended Action: Copper optics doesn't support Loopback Line,use different optics that doesn't have this restriction.Please collect - sh platform - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONCERTO-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: CONCERTO Event Manager notify error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-IDT_ALL_FAILED
### Response:
(Severity: 7), (Category: HA), (Description: Multiple attempts to transfer initial mirrored data to the standby have failed, and the attempts have been stopped.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-INCOMP_CARDS_IN_SDR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card got shutdown is incompatible with the other type of card in the same SDR.), (Recommended Action: In admin configuration mode, remove the card got shutdown from the SDR and add it to another SDR which does not have the other type of card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSHD-3-ERR_REGISTER_DEBUG
### Response:
(Severity: 3), (Category: IP), (Description: Attempt to register with the event magager for debugging events fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPC-6-HW_INFO
### Response:
(Severity: 6), (Category: MGBL), (Description: Data plane HW info message.), (Recommended Action: Check if the DPA reported any other errors and/or traffic loss was observed. This informational message indicates a situation that is likely transient and should recover on its own.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-4-STALE_SESSION
### Response:
(Severity: 4), (Category: SECURITY), (Description: Session is not terminated but the session id is made = 0 . Stale sessions present.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-REPLY
### Response:
(Severity: 3), (Category: OS), (Description: The server failed to reply to a client request.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUMP-3-RIB_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: RIB initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_UNDOCK_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as old attach point data was being undocked for new data. As a result, the old data is either still activated, or NO data is activated for this attach point. As this point is would be best to restart the policy_repository to try to clear this inconsistency.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-OPTICS_INFO
### Response:
(Severity: 4), (Category: L2), (Description: An issue is detected during operation on Optic interface module. %d - port number. %s - description of the operation. %s - description of the issue. %s - reason for the issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_FC_DIP2_ERR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control DIP2 parity error on NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-MALLOC_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system could not allocate memory for its data.), (Recommended Action: Restart the impacted process. If the issue recurs, then issue the command 'show tech-support' to gather data and provide the error message and the gathered information to the Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-GO_STANDBY
### Response:
(Severity: 6), (Category: HA), (Description: The card is going standby.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-6-NVRAM_UNKNOWN_FSTYPE
### Response:
(Severity: 6), (Category: MEDIA), (Description: The ROMMON variable for format option is unsupported, so that format operation will not happen.), (Recommended Action: Please do not set ROMMON variable by hand.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IDB_LIB-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error during improper updation of variables or incorrect return state in platform FIB), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-6-NHDB_LOCAL
### Response:
(Severity: 6), (Category: ROUTING), (Description: The nexthop of a static route is a local route. This is an invalid configuration.), (Recommended Action: Check configuration for the static route and its next-hop.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-TSP_B_PWM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSP decoder B PWM error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_BATCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to update RIB with a batch of updates.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-ERR_EVC_CLOSE
### Response:
(Severity: 4), (Category: INFRA), (Description: CMPP failed to close a connection to an essential service. This is an internal error and it requires a restart of the process for recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-EVM
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external event manager function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-SYSDBREG
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred when registering with the system database), (Recommended Action: This will cause failure of sysdb initialization. Please check initialization failure message for recommended action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message from CBC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-PROBLEM_EXITING
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during shutdown of the STP process, and it was unable to notify the System Manager that it was about to exit. In rare cases, this could result in a failure by the System Manager to restart the process when it ought to do so.), (Recommended Action: If the process ought to be running and is not, then attempt to restart it using the 'process restart' command. If this fails, deconfigure the process and re-enter the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_FILE_PATH
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, file path.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ADR_PRODUCE
### Response:
(Severity: 3), (Category: OS), (Description: Unable to produce requests in ADR.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM_SHOW-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HFR_PM_SHOW encountered an error while update), (Recommended Action: Please enable 'debug sysdb access ...' and capture the output. Also capture required info before contacting TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDP-3-VRF_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the UDP process attempts to set up connection with the RSI agent during the startup of udp process.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-RMINIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to init rm failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-NOAUTH
### Response:
(Severity: 3), (Category: IP), (Description: The peer is sending an authentication digest but we dont have authentication configured locally.), (Recommended Action: Check the configuration locally and make sure that the password or authentication information is available.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-PCI_BUS_ERROR_THRESHOLD_EXCEEDED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A device has been detecting a PCI bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-CENTRAL_CLUSTER_PARITY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-CONNECTION_ABORT
### Response:
(Severity: 3), (Category: IP), (Description: The TCP connection was aborted due to an internal error.), (Recommended Action: Identify the application that owns the affected socket and try to examine its traces and debugs. If the problem persists, collect the output of show commands, traces and running coredumps of the application as well as TCP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install rollback command in IOS XR?
### Response:
The 'install rollback' command is used to revert the system back to the previously committed software set. This is useful if issues are encountered after performing an installation or upgrade.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-3-CORRUPT_FILE
### Response:
(Severity: 3), (Category: MEDIA), (Description: The specified File is corrupted on Primary Boot Device.), (Recommended Action: Run 'install verify packages repair location <>' for respective node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-2-SHMWIN_CRITICAL_ERROR
### Response:
(Severity: 2), (Category: QOS), (Description: The SSE QoS EA module encountered a critical shared memory error. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-I2C_BUS_HANG_DETECTED
### Response:
(Severity: 3), (Category: DRIVER), (Description: An I2C bus hang condition was detected and the CCC driver is performing recovery operation to restore the I2C bus to operational state.), (Recommended Action: N/A.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTS-3-INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred while starting up the TTS process. TTS will not be restarted by sysmgr.), (Recommended Action: The arguments supplied to tts are most probably wrong. Check the arguments.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_PKT_F1_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 1 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-BRM_DID_CULPRIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: There might be a fabric disconnect in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-VSA_FORMAT_ERR2
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA format error in daemon user configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-5-LOCAL_PATH_FULL
### Response:
(Severity: 5), (Category: OS), (Description: Local core dump path is not available because it is full of files still being transferred.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-QAD_RX_THREAD_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT driver failed to create qad rx thread), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MCAST_NETIO_DEBUG-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error. Multicast NetIO debug library initilization failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-OCT_RX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar fabric interface reported to interrupt controller that the data it received had parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-INVALID_NODE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error has occurred in an application that has caused it to pass invalid data to the MBI infrastructure. The MBI operation in progress may not be carried out. %s - indicates the location of the error.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-5-NHID_INVALID_SIGNAL
### Response:
(Severity: 5), (Category: ROUTING), (Description: FIB has detected an invalid NHID (Next Hop ID) signal from the RP. Traffic being forwarded via the next hop shown in the syslog, may be forwarded incorrectly or dropped.), (Recommended Action: Check that traffic being forwarded via the next hop shown in the syslog, is being forwarded correctly. If it is no further action is necessary. If traffic is being forwarded incorrectly, restart the fib_mgr process on the effected line cards. If no further NHID logs are seen on fib_mgr restart, the problem has been cleared. If restarting the fib_mgr process does not fix the issue, restarting the rib_ipv4 or rib_ipv6 process on the RP, will cause RIB to regenerate all NHID's.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-PLATFORM_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The Platform returned an error when ELO tried to update the loopback mode, link monitoring configuration, or udlf configuration. This could mean that remote loopback, link monitoring, or udlf detection will not work as expected.), (Recommended Action: If the error message is not expected by the user, and the ethernet_link_oam_ea process is currently running, restart it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-ADV_IP_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The VRF feature is configured without the necessary Adv-IP license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_SUCCESS_COMMAND
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd successful login information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-RECONF_VL
### Response:
(Severity: 6), (Category: ROUTING), (Description: OSPFv3 process is being reset, and it is going to select a new router-id. This will bring down all virtual links. To make them work again, virtual link configuration needs to be changed on all virtual link neighbors.), (Recommended Action: Change virtual link configuration on all the virtual link neighbors, to reflect our new router-id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_8_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-1-NODE_AUTO_FPD_PWRCYL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Message indicating that the node has received a power down request to activate newly upgraded FPDs and the node is going to power down.), (Recommended Action: No action is required. The message is logged for informational use.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-3-ROOT_DEVICE_BUS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A PCIe bus error has occurred. The message has the root device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-2-SYSTEM_FAIL
### Response:
(Severity: 2), (Category: IP), (Description: There was a critical system call failure resulting in a failure to provide some system service.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_MEM2_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR MEM2 Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-EBS_CPP_LP_FIFO_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Egress Buffer and Scheduling to CPP low priority FIFO full.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-2-RESTART_TO_RECOVER
### Response:
(Severity: 2), (Category: INFRA), (Description: Instorch has hit a fatal error and will restart in order to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Directory_Service-3-DUPLICATED_SERVICE
### Response:
(Severity: 3), (Category: INFRA), (Description: Specified process in the error message tried to publish a service, which already exists in the system, via different DS handle. It is unexpected for a process to publish the same service (same PID/Name/Scope) via 2 different DS handles.), (Recommended Action: The reason the process trying to publish the same service via different DS handles has to be analyzed. Please contact Cisco Technical Support and provide the the details about the process and any relevant system events that happened before the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-REPRGM_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: When an ACL definition is changed which is used by a some class-map as a match criteria, it result in reprogramming of all the polices which are using this class-map and are already applied to some interfaces. This message lists the policy-map and ACL for which errors have occured during reprogramming.), (Recommended Action: Detach policy-map in the error message from all interfaces of the line card where issue is seen. Now, re-attach policy-map to the interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-2-KEY_CONFIG_INVALID_LIFETIME
### Response:
(Severity: 2), (Category: IP), (Description: TCP-AO has following restrictions on the key configuration. 1) It MUST have same send lifetime and accept lifetime User has mis-configured the key and it does not meet above crieteria. TCP-AO will not use this key for any new connection, existing connection will continue to use it till send lifetime.), (Recommended Action: Please correct the configuration. No need to re-configure it under BGP or to clear BGP neighbors.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_TOPOLOGY_INIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Cannot create manageed timer leaf), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-INVALID_SLOT_BUS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-CREATE
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the object to create already exists. The details are in the error string.), (Recommended Action: Check that the object to create does not exist. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-LIBENS_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA ENS client library initialization error), (Recommended Action: Report the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-COLLECTING_DEBUGS_PRIOR_RESET
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An timeout condition was hit causing shelfmgr to collect some debug info via a script.), (Recommended Action: If this error persists, please collect the file shown in the SAVED_RESET_DEBUGS message and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
preroute-3-INTERNAL_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal failure occurred in the preroute manager process requiring the restart of the process.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this failure is encountered, to recover If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-7-LTRACE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The process encountered a problem in the main event loop with a basic initialisation or with an event/event manager/event connection operation and has exited. The text of the message displays the process and operation which failed to complete successfully with the decoded return code.), (Recommended Action: None. Process has exited and will be re-spawned by SysMgr.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-INVALID_PATH
### Response:
(Severity: 7), (Category: SYSDB), (Description: An operation has been attempted on a part of the SysDB namespace that should not be used.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_2_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT-3-GRP_ALM_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The monitored flow has traffic issues as indicated by the react trigger. The problem is introduced either at some upstream router or even at the traffic source itself. Alternatively, a configuration mismatch between the traffic source and this router (for the flow data rates etc) can cause this error.), (Recommended Action: Check to see if traffic source is indeed sending traffic. Check that the traffic characteristics defined at the source match that on the monitoring router. Trace the traffic flow upstream to the source and verify flow-mon statistics at each applicable hop. Check for packet drops for the flow at intermediate hops - between source and the monitoring router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-ECM_RETRY_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while attempting to schedule a retry for a failed operation. The operation will not be retried. It is likely that some Maintenance Points will not be created. This may indicate that system resources are low.), (Recommended Action: Attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-TARGET_CFG_CREATE
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process failed to create target config buffer. Configuration can not proceed.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACL_COMPRESSION_LVL_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Compression level of ACL being attached is not supported.), (Recommended Action: Compression level 0 or 2 should be specified in the attach CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_EDM_FNS_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The IS-IS process failed to initialize the handler functions for external data management. As a result, isis show and clear commands will not function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_KDUMP_TIMEOUT_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card is being reset because of timeout waiting for KDUMP operation to complete from a specific node. This is an indication of KDUMP operation taking longer that what is expected. The kernel core file collected under this error condition might not be complete.), (Recommended Action: Check the harddisk space of the active RP for available free space. Try to free up some storage space to correct this problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-REGISTER_RPC
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to register its RPC server with the RPC portmapper. The message would appear during initialization of DNS process (i.e. domain_services) and normally would go away after process restart domain_services), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-RELAY_ACTIVATE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: A VRF Relay activate operation has errored and failed.), (Recommended Action: Inspect the error information and reactivate the application which owns relay. The error information can be displayed through the following command: <CmdBold>show appmgr application name <name> info detail<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXRC-1-EXIT_INIT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-COMPLETE_PACKAGE_CLEAN
### Response:
(Severity: 6), (Category: INSTALL), (Description: Clean successfully completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-MEMBER_INFO_COLLECT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to collect member link info.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-APP_INTF_INST
### Response:
(Severity: 3), (Category: SERVICES), (Description: The received instance info for this interface is same as what had already been configured.), (Recommended Action: This is a serious error and cgn_ma process has to be restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-PROVISIONING_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: An internal error has been encountered and the Attachment Circuit cannot be established.), (Recommended Action: Verify that the number of Attachment Circuits (AC) on the router does not exceed the L2VPN scaling capability for that line card. It may get resolved by removing the configuration for the ACs that are in UR or DN state including the ones identified in this message. Then re-configure the required ACs without exceeding the node limit.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_3_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPS_ES_ACLMGR-7-ERROR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-3-MSG_CHAN_GLOBAL
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when publishing a global directory channel.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel backup feature?
### Response:
The MPLS TE auto-tunnel backup feature enables the automatic creation of backup tunnels to provide fast reroute protection for MPLS TE tunnels and the IGP against link and node failures. Backup tunnels are created to next-hop routers and activated when the protected link or node fails.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-6-OS_HMAC_MISSING
### Response:
(Severity: 6), (Category: IP), (Description: ''), (Recommended Action: 'Load the Cisco IOS XR Security Package.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-6-CEMGBL_GOT_NOTIF_FROM_CESWITCH
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Cemgbl got notification from CE switch and displays the count and 1st index of it.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-5-SPA_OVERTEMP_MINOR
### Response:
(Severity: 5), (Category: PLATFORM), (Description: SPA temperature is risen above or fallen below minor threshold.), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_DIP2_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control DIP2 parity error on NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-SYSDB_CFG_BIND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that bind to config namespace in SysDB has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-XFP_NPOWER_THRESH
### Response:
(Severity: 2), (Category: L2), (Description: The XFP device lost its power OK state causing the link to flap. Software tried to recover the issue by reseting the XFP device but the problem persisted and the XFP device has been powered off. It is recommended to replace the XFP module.), (Recommended Action: Replace the XFP module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-DOMAIN_KEY_GEN_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'The key pair generation failed at the device for ' 'triggering BS request message to Autonomic registrar. Can be due to ' 'failure in RSA key pair generation in the crypto library'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIRROR-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to bind to sysdb. The error is displayed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE0_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE0_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOL_DEMC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOTHRA-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the mothra driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to disable RSVP on an interface?
### Response:
To disable RSVP on an interface, use the 'no mpls traffic-eng interface' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#no mpls traffic-eng interface GigabitEthernet0/0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-NODE_NAME_FAIL
### Response:
(Severity: 6), (Category: OS), (Description: Failed to get the local node name from platform library.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: The process has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-MPLS_SROPT_CRIT_FAIL_LFA
### Response:
(Severity: 6), (Category: ROUTING), (Description: LFA/protection is NOT supported with SRopt feature. Please check your config. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-FALLBACK_PSK_MKPDU_ICV_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Integrity check validation(ICV) failed for the received MKPDU, identified by the given CA(CKN) & RxSCI.), (Recommended Action: For PSK(pre-shared-key) authenticated session, make sure to have, same CAK(key-string)(keychain config for MACSec), configured with valid lifetime for all CA members, for EAP authenticated session, check for the dot1x EAP methods & credentials.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRIVER_LITE-3-ERR_ASIC_ACCESS_EXCEPTION
### Response:
(Severity: 3), (Category: FABRIC), (Description: This indicates that the fabric ASIC failed to acknowledge an access request from the CPU. This can happen if the host CPU tries to access an address that is out of range for the ASIC. Also, accessing a register from a block that is still in the logic reset state could stall this access and subsequent accesses to the ASIC.), (Recommended Action: If this condition is noticed for every access to the ASIC, then the ASIC is possibly wedged. Resetting the ASIC or reloading the fabric card will help to recover from this condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-6-NHDB_WITHIN_SUBNET
### Response:
(Severity: 6), (Category: ROUTING), (Description: The nexthop of a static route was outside of outgoing interface. Now it has resolved through the the same interface so became valid configuration.), (Recommended Action: Check installed routes for the static route.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-SYNC_LOSS
### Response:
(Severity: 5), (Category: IP), (Description: NTP lost synchronization due to one of the following reasons: 1. Server authentication failed 2. Access denied by remote server 3. Peer unreachable or clock selection failed 4. The association was removed 5. The clock was stepped and needs to be resynced 6. The ephemeral client association was timeout 7. ntp clear command), (Recommended Action: If SYNC_LOSS because 'The clock was stepped and needs to be resynced' keeps occuring constantly during time, try to exec <CmdBold>ntp reset drift<NoCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_SENSOR_VOLT_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The sensor in the satellite module reported a critical hi/lo sensor value against the configured threshold value.), (Recommended Action: Verify current sensor temperature values using the CLI: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. --> particularly for temp output of SAT ID. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env trace <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env trace <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-2-DISK_CRIT
### Response:
(Severity: 2), (Category: INFRA), (Description: When some monitored disk's usage is above CRITICAL Threshold Percentage.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EC_TRACE-3-GEN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-SPABRG_BAY
### Response:
(Severity: 3), (Category: L2), (Description: SPAQFP bridge has encounted an error in SPA related operation), (Recommended Action: Reinsert the SPA and fasten it tightly, if error persistent, replace this SPA with same type, report error with all error messages.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-AF_SLOW_PEER
### Response:
(Severity: 5), (Category: ROUTING), (Description: The peer mentioned is slower than the rest of the peers in the update_grp.), (Recommended Action: Move the neighbor to its own update group by changing the outbound policy.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_UIDB-4-WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A run time warning occurred during the pidb operation on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TOPAZ_PFI-3-SET_GLOBALS_SHM_OPEN_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to setup shared memory due to failure in shared mem open. The returned err code should indicate the reason for the failure of the api. This is a transient error in the system likely due to low mem condition etc. The impact to system is minimal except that a few counters don't get set. The client logging this error should retry the api and/or handle this error accordingly. If this error is seen persistently, Initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_OPTICS_FAILURE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IP_EA-3-ERR_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_PKT_F1_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 1 single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWTECH-3-ERR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA_LTRACE-3-EVENT_INIT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA ltrace lib failed to initialize the events ltrace This has zero impact on the functionality.), (Recommended Action: This message should not occur everytime. Check for memory conditions on the node. Contact TAC, in case it persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Rx power greater than or equal to the high Rx power alarm threshold. The SFP is the pluggable optics on the line cards. The Rx power threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a logging host in IOS XR?
### Response:
To configure a logging host for syslog messages, use the 'logging' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#logging 192.168.1.100
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-GSP_SEND_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: A failure occurred attempting to send a message from ISSU Manager and ISSU Director required to coordinate the ISSU operation. ISSU Manager will restart itself and attempt to resync.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX8749_CDMA-3-SET_CHANNEL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: cdma set channel attribute has failed, this might be a program level issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-NSR_READY_STATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The listed state refers to the state of NSR, which is either 'ready' \ or 'not ready'.), (Recommended Action: None. This is a solicited message (by \ 'logging events sync-updates' . User may verify the NSR sync \ status as shown in the output of \ 'show rsvp nsr status detail'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN_POLICY-3-ORA_RUN
### Response:
(Severity: 3), (Category: L2), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error verbose<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error verbose<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-INSTALL_RESTART_EXI_DRIVER
### Response:
(Severity: 4), (Category: INFRA), (Description: The Install component has detected a change within the EXI driver kernel module, the module will be removed, all capture sessions deleted, all EXI interfaces deleted, and all 'to_xr' interfaces will be deleted, then the XLNCD process will restart.), (Recommended Action: Please wait for XLNCD to restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-7-IFACE_NOT_UP
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: A packet was received on a tunnel whose interface status is not up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-EDM_ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Generic Show TAM Error message - (Error Message - Error Description).), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_OOS_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-SHMEM_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SPP,PDMA Failed to get the shared memory. %s- Function Name. %d- Line number.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-FIB_NOT_READY
### Response:
(Severity: 6), (Category: L2), (Description: The forwarding for session is not ready.), (Recommended Action: Determine if the forwarding path to the neighbor is UP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-FGID_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FGID failed to initialize due to the above error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-3-FIELD_PRESEL_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OFA failed to create field-group on this NPU.), (Recommended Action: Verify your hw-module configuration. Otherwise, collect show-tech and contact cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOGMIB-3-SYSDBERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: The syslog mib reads the sysdb tuples and gets information about the syslog mib objects. If due to some reason the sysdb error occurs this message is printed out.), (Recommended Action: Collect show tech-support sysdb on the location where this error is seen and also collect show syslog trace self slow/error from the active rp and also the show logging output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSCMIB-7-NOMEM
### Response:
(Severity: 7), (Category: SNMP), (Description: The MIB has failed to aquire the required amount of memory.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-3-POLICY_REPOSITORY_INCONSISTENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The user is trying to do an operation which encountered inconsistent state for a policy object), (Recommended Action: The policy_repository process may function properly in the future but the operations associated with this configuration are likely in an inconsistent state. Restarting the policy_repository may correct the situation. If error message occurs again, copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-AUTH_RENEW_SUCCESS
### Response:
(Severity: 6), (Category: LICENSE), (Description: Authorization of customer requested entitlements are successfully renewed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATMSNMP-3-info
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_FWD-3-EVENT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Some error occured in event/event manager/event connection operations. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMS-3-MY_ID_MISMATCH
### Response:
(Severity: 3), (Category: L2), (Description: The Checkpoint table contained unexpected data. This is likely to indicate checkpoint memory corruption.), (Recommended Action: Follow any known checkpoint memory corruption diagnostic steps. Restarting the process that emitted this error message may clear the state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN_SWITCH-2-SWITCH_POWERED_DOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The MLAN switch is down or it is not reached via MDIO bus.), (Recommended Action: Gather the data listed in 'required_info'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-PULSEQ_POLL
### Response:
(Severity: 4), (Category: HA), (Description: An error was encountered during wdsysmon's poll for pulseq usage.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-BAD_LSP_FORMAT
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has received an LSP containing a format error. This indicates that the system which built the LSP is not conforming to the protocol specification. The message contains a description of the format error. IS-IS will use only the valid information contained in this LSP. However, IS-IS will not use the invalid information contained in this LSP. IS-IS will flood the LSP to neighbors.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'show isis database verbose' may be used to identify the problematic LSP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an severe error message in the OFA module to indicate an error.), (Recommended Action: Please collect the console log, OFA traces (show ofa trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CPA_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in the CPA NB/SB API), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-3-ERR_BCDL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The BCDL Consumer process has encountered the annunciated BCDL error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-VIRTUAL_IN_NON_BACKBONE
### Response:
(Severity: 4), (Category: ROUTING), (Description: An internal error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-INIT_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The SockIO SPP plug-in failed to initialize.), (Recommended Action: If any problems are seen, they may be rectified by restarting the spp process using the 'process restart spp' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR provide high availability in terms of hardware redundancy?
### Response:
IOS XR platforms support redundancy of critical hardware components including route processors (RP), line cards (LC), switch fabric cards (FC), power modules, and fan trays. IOS XR provides hitless failover to a redundant RP, N+1 redundancy for FCs, and online insertion and removal (OIR) of LCs, RPs, FCs, and other components.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5346_PLL_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5346 PLL loss of lock detected/cleared for RSP), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-XFP_ACCESS
### Response:
(Severity: 4), (Category: L2), (Description: Software reset the optics module as it could not read or write to it during initialization.), (Recommended Action: None. Software corrected the issue by power cycling the XFP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-2-STARTUP
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM process failed to spawn correctly.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-6-PRINT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Print the data for debug purpose or for change of states), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-MUTEX_LOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver has been unable to lock access to the UART.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMIAP-4-ADDR_CFLCT
### Response:
(Severity: 4), (Category: IP), (Description: IP address on the management interface specified is conflicting with the virtual IP address.), (Recommended Action: Either change the virtual IP address to some other IP address on the management interface's network or change the conflicting IP address on the specified management interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-STANDBY_CONNECTION_DOWN
### Response:
(Severity: 6), (Category: HA), (Description: Redcon has determined that the connection to the standby card has gone down.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-CMDLINE_BOOT_OVERRIDE_ENABLED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a warning message to indicate that using '-o override' option while booting the image, the operator will override the default IOS XR behavior which blocks the RP with ROMMON version v1.19x from coming up as the standby.), (Recommended Action: Please upgrade the booting RP to the latest recommended ROMMON.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KEYCHAIN-3-CERRNO_REGISTRATION
### Response:
(Severity: 3), (Category: SECURITY), (Description: A unexpected failure has been detected while registering the DLL of keychain module with the Cerrno process which is used to display the error messages along with exact error codes.), (Recommended Action: Restarting the keychain server process (kc_srvr) with the command 'process restart kc_srvr' might solve the issue. If the message recurs, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show key chain trace client <clientname> both<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show key chain trace client <clientname> both<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
METRO_STATS-7-ERR_INIT
### Response:
(Severity: 7), (Category: L2), (Description: These errors are encountered at mstats process initialization time. The types of errors are: 1 Unable to determine hardware version. 2 Unable to create event manager. This will prevent stats process from receiving events. 3 Unable to create timer. 4 Unable to initialize client database. This will result in clients not being able to register with stats server to collect stats. 5 Unable to allocate Ingress/Egress stats. This will result in Stats manager not being able to maintain/update any hardware stats. 6 Unable to register with debug. This will prevent stats process from logging debug messages. 7 Unable to initialize or register with checkpoint service. This will prevent stats manager from restoring the information required at restart. 8 Unable to connect with SYSDB. This includes failure to connect, bind, register with SYSDB. 9 Unable to Initialize hardware packet service.), (Recommended Action: No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SYSDB_SET_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The DAD library encountered an error while writing out the policy information for the above reason.), (Recommended Action: restart policy_repository and check for re-occurence of issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-3-PTMM_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was encountered while initialising the PLU/TLU memory manager This can occur during: 1. Event Manager Creation 2. Debug Initialization), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICCP-6-BACKBONE_INTERFACE_STATE
### Response:
(Severity: 6), (Category: INFRA), (Description: The configured backbone interface changed state.), (Recommended Action: If the state change was unexpected, confirm the configuration settings for the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_HYNIX_MEMORY_REPAIR_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the SBUS Driver to indicate that a HARD memory repair operation has failed on the specified HBM memory.), (Recommended Action: The line card needs to be returned for repair.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-3-ERR_PAK_REDIRECT
### Response:
(Severity: 3), (Category: IP), (Description: A packet has been sent to us when the sender should have been able to directly reach the destination. We were therefore also trying to generate an ICMP redirect message, but were unable to do so. The original packet would have been forwarded normally.), (Recommended Action: This generally indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOFRR_FLOW-3-WD_OOR_RED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Currently SKYWARP supports maximum 1024 flows which are guaranteed to have traffic switchover time within 50 ms. In addition, a line card encounters HW out-of-resource condition when the total number of MoFRR routes reaches 2048 MoFRR routes. Thus, any new configured 'MoFRR' beyond 1024 flows are not supported.), (Recommended Action: 1) Remove All Unsupported MoFRR Routes: (a) Remove all 'unsupported' MoFRR routes configured beyond existing 1024 MoFRR routes in the platform. (b) This step must be done first to recover back to normal state. 2) Modifying MoFRR ACL: (a) Modify the MoFRR ACL to be more specific to match a smaller set of flows which are planed for MoFRR feature. 3) Check Total Configured MoFRR Flows: (a) Use show mfib hardware route summary location <location> to check currently total number of MoFRR routes configured in the platform. Note that, current release supports maximum 1024 MoFRR routes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-LOW_2_5VCC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low in 2.5Vcc voltage. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NH_UNLOCK_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to unlock an entry in the BGP nexthop Table database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-EVM_ATTACH_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The packet subsystem encountered an error when attaching a handler for synchronous or asynchronous events.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-INVALID_FGID_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1_LNM-3-MINWARNNOISE
### Response:
(Severity: 3), (Category: L2), (Description: Noise on the link identified in the message has either crossed or fallen below the threshold value configured by the user for minor warning level on this controller. Video or voice quality may be affected if noise is above the configured threshold.), (Recommended Action: This link requires administrative attention. If noise is at or above the configured threshold, this may require removing/replacing this controller from service. If noise is below the configured threshold, the administrator may choose to put this link back into service.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-1-HEALTH_MONITOR_PON_RECOVERY
### Response:
(Severity: 1), (Category: L2), (Description: An PLA SW error has occurred and requires pon-reset to recover. The PLA ASIC was in a Halt state for and extended period..), (Recommended Action: This informational message indicating that the required error recovery action took place.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-NODE_BRINGDOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The NP driver was unable to perform a critical function and must trigger a node bringdown to effect recovery.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-3-PORT_CONTROL_REMOVE_CLIENT_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Failed to remove client for port-access.), (Recommended Action: Check the platform logs for error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_INARP-2-INTERNAL_FAILURE
### Response:
(Severity: 2), (Category: L2), (Description: An internal failure occured during the initialization of debug registration. Failure is related with debugging. It would not affect the router's other functions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-4-RADIUS_NOSERV
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-API_ERROR_2
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The specified API returned the specified error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-SOCK_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace socket error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace socket error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCT_STOP_STATS_MISMATCH
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when acct stop usage report mismatch between session and service.), (Recommended Action: Collect show tech subscriber. And show subscriber session all detail internal)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_WAITING_FOR_TOPO_TIMED_OUT
### Response:
(Severity: 3), (Category: FABRIC), (Description: This indicates that the driver has not received the necessary topology information to initialize the asic. The driver will continually re-request topology. This message can also be seen in a multichassis system when a fabric card is pulled out or powered down and the other end is still up and running or if the plane config for this card is missing.), (Recommended Action: Check if all the required fabric cards are UP and running.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Warnings during improper updation of variables or incorrect return state in MPLS FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-NMI_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Non-Maskable Interrupt (NMIs) is a hardware interrupt that standard interrupt-masking techniques in the system cannot ignore. It typically occurs to signal attention for non-recoverable hardware errors. Currently, we are handling 4 types of NMIs: 1. DIMM Thermal Event 0x63 2. PCH Catastrophic Error 0x64 3. CPU Thermal Trip 0x65 4. IR3570 Voltage Regulator Hot 0x66), (Recommended Action: This is non-recoverable hardware error and require cold reload of the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: CCSQ Event Manager event block error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_0_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-INVALID_ARG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error has occurred in an application that has caused it to pass invalid data to the MBI infrastructure. The MBI operation in progress may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_SHUTDOWN_LINK_FABRIC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and cause fabric link shutdown.), (Recommended Action: An error that caused fabric link shutdown has happened and been handled Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-3-INVALID_RSP
### Response:
(Severity: 3), (Category: OS), (Description: MB response packet error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-DELETE_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A file involved in the current request or operation could not be deleted. This will not affect the current operation, but subsequent operations may be affected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-GEN_INFO_CERR
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in the L2VPN manager while communicating with the system interface management service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. required_info: Please provide the exact error message seen and output from following commands on the node where the problem occurred: show tech-support l2vpn show mem sum)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-MSG_SEND_EVENT
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to send a sigevent to the client that last sent a message on the connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-4-SHOW_ERR
### Response:
(Severity: 4), (Category: OS), (Description: An error has occurred when server was trying to handle a shmwin show request.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-GROUP_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp groups summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp groups summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace group error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace group error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace group protocol<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace group protocol<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_GET_ITEMS
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the items to fetch do not exist. The details are in the error string.), (Recommended Action: Check that the requested items exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-DBG_INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to initialize one of its debug services. The process cannot continue without its debug services and so will have aborted, but should have been restarted rapidly afterwards. This message will have been preceded by another one providing more precise details of the failure. The problem may be due to low memory resources and the detail of the preceding error message provides an indication of whether this is the case.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_VTY_CONNECT
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred when RloginD requested a VTY for a session. This might occur if the requested rlogin session cannot be satisfied by any of the unused VTYs in the configured vty pool(s), e.g. if all VTYs are in use, if transport-input is not allowed for rlogin, or if the configured ACL does not match.), (Recommended Action: Check that the configured VTY pool(s) can satisfy this rlogin request based on which VTYs are currently in use. This can be checked with 'show users', and looking at the VTY pool configuration. If the configuration appears to be consistent then try to rlogin with debug rlogin detail on; this might indicate where the problem lies.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_BRST_SHRT_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 Tx burst short error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-OPTICS_INSERTED_STATE_MISMATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Optics inserted state from IMFPGA and sdk is conflicting. The port may not function as expected), (Recommended Action: OIR optics and try again)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-6-link_info
### Response:
(Severity: 6), (Category: L2), (Description: Interface tx will not be enabled until the fabric links are up.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-INVALID_ADDR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected invalid address error on some bus), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-DRP_NOT_BOOTED_UP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the DRP and some X86 RP are in the LR, so the DRP is shutdown.), (Recommended Action: In admin configuration mode, remove the DRP from the LR and add it to another LR which does not have X86 RP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-PRINT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Service Platform Manager encountered an provisioning info.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PARTICLE_TINY_POOL_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Tiny pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_DISABLED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Hard reset recovery action is disabled. The network processor is in an unknown state and may not be operational.), (Recommended Action: Unless disabling hard reset was intentional, The hard reset must always be enabled on a production node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_BACKUP_PATH_EXCEEDS_MSD
### Response:
(Severity: 5), (Category: OS), (Description: Backup path number of labels exceeds msd value.), (Recommended Action: Reduce the number of labels of the backup path.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_ATOM-6-INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the platform L2FIB ATOM component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-7-ERR_SEND_INGRESS_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Cannot send packet to qad queue, likely the qad queue is full and application does not drain the qad queue fast enough %s - error description %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %d - queue number %x - error code), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-1-CHASSIS_ID_MISMATCH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'V1 power module in a chassis with a backplane IDPROM configured for V2 or newer power modules'), (Recommended Action: 'Reprogram the chassis backplane IDPROM, or replace the power module')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-2-MMU_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The switch encountered a MMU error. MMU errors can affect traffic forwarding in the switch.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_SYSTEM_ERROR_SPECIFIC_NODES
### Response:
(Severity: 3), (Category: INSTALL), (Description: Further information supplied to be used in conjunction with the INSTALL_SYSTEM_ERROR_SPECIFIC_NODES_HDR message.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repair' if anomalies are found. If the problem persists collect diagnostic information about the failure using the specific command and pass it to your TAC representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR handle IPv6 routing?
### Response:
Cisco IOS XR handles IPv6 routing by supporting IPv6-specific routing protocols like OSPFv3 and MP-BGP, ensuring comprehensive routing capabilities in IPv6 networks.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-PRF_CFG_PLAT_REJECT
### Response:
(Severity: 4), (Category: L2), (Description: PTP has not applied an item of profile configuration on this interface because the platform has rejected it. The error itself should contain more information on the exact reason.), (Recommended Action: Modify the profile configuration such that it contains only supported config. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-BIND
### Response:
(Severity: 4), (Category: MGBL), (Description: MDACon was unable to bind to MDA. It is possible that there is a problem with MDA or the Schema Server, or the communication infrastructure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_UPD-1-GOLDEN_UPGRADE
### Response:
(Severity: 1), (Category: INFRA), (Description: iofpga_capi_server has detected on this PID the golden (or backup) IOFPGA is not protected and this requires one-time golden fpd firmware upgrade. During the upgrade operation avoid router intrusive operation like power cycle, reload or configuration update otherwise, board may render unusable and require RMA to fix it. Post successful fpd upgrade perform 'reload rack 0/hw-module location <loc> reload' or power-cycle to activate the new fpd firmware.), (Recommended Action: None if iofpga fpd upgrade successful and latest firmware is activated on the IOFPGA. Check 'show hw-module fpd' to verify the same. In case of upgrade failure or any fpd issue recommends collecting below logs from admin 1. syslogs/console logs 2. show tech fpd 3. show tech obfl 4. show tech shelf-mgr 5. show tech ctrace 6. show tech fpd-serv)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-EVENT_MANAGER_CREATE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while trying to create a event manager. It is used to create a communication (message) channel and provide the framework for managing the messages and various events that arrive on the channel. Possible reasons for failure could be: 1. Insufficient memory 2. Error occured while creating message channel 3. Failure occured while attaching to message channel), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-DISALLOWED_PD_API_IMPLEMENTATION
### Response:
(Severity: 3), (Category: INFRA), (Description: The platform capabilities for the platform specify an invalid value for an install-related parameter.), (Recommended Action: Please obtain the entire output of the following command: <CmdBold>show tech-support install<noCmdBold> Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *DDTS*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'session-group' in IOS XR BGP configuration?
### Response:
A session-group allows the definition of common configuration parameters that can be inherited by multiple neighbors. This simplifies configuration and maintenance when many neighbors require the same configuration.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-QSM_ADD_SERVICE
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: qsm_add_service failed.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-GENERAL_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: The named virtual service has triggered the log. Please interpret the log in the context of the virtual services.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_15_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-CALL_DLL_INIT
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An essential part of the VPDN CALL infra has failed to initialize in a client process and may prevent VPDN from functioning.), (Recommended Action: Restart the client process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PCI_BR_RESET
### Response:
(Severity: 6), (Category: INFRA), (Description: Upon a card reload, when the the PCIe links between the upstream PCIe bridge device connected to the Ethernet Switch do not come up after attempting to do individual port reset, the upstream PCI bridge reset is attempted. This message indicates the PCIe bridge reset was attempted when other forms of more contained reset recovery sequence failed.), (Recommended Action: No action is required from the operator. This is informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-UNSUPP_TX_CH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects an unknown error on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption from received cells. There can also be a software bug such that the error is not handled), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-MPLS_LABEL_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: mpls label create/update failed due to OOR.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-INVALID_IDPROM_DATA
### Response:
(Severity: 4), (Category: DRIVER), (Description: IOFPGA driver detected invalid data in IDPROM content. This can happen only with protoype boards that did not get correctly programmed.), (Recommended Action: Content of the IDPROM will have to be fixed to avoid seeing this warning message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-MUNMAP_PEER_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error when munmap a peer process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - show shmwin <win_id> participant list - show process all - Check whether the process with the pid exists in the router - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_MASTER-3-GENERAL_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Some requested operation failed. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-STATS_HW_PROFILE_MISMATCH_NO_LC
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current stats profile and the newly configured stats profile. Needs attention with RP reload.), (Recommended Action: Need to reload the RP in order to activate the new stats profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp neighbor targeted' command in IOS XR?
### Response:
The 'mpls ldp neighbor targeted' command is used to establish a targeted LDP session with a specific neighbor. Unlike link-based LDP sessions, targeted LDP sessions are not tied to a specific interface. They are used in scenarios where the LDP peers are not directly connected, such as in L2VPN and VPLS configurations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-MSTATS_ALLOC_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature EA DLL failed to allocate statistics entry for ACL. Number of ACL entries requiring statistics entries has exceeded statistics entries reserved for security ACLs on this line card. As a result, per ACE hardware accouting for the failed ACL entries is not available. There is no impact on ability to apply security ACLs in hardware.), (Recommended Action: If per ACE hardware accouting is needed for ACL in error message, reduce security ACL configuration on this line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_PARAMETER
### Response:
(Severity: 3), (Category: OS), (Description: Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of 'install clean' in Cisco IOS XR?
### Response:
The 'install clean' command in Cisco IOS XR is used to remove unused software packages and free up disk space, helping to maintain the router's storage efficiency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-3-CLOCK_UPDATE_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred when updating system clock with the clock adjust process of clock hardware. This causes the internal clock on active RP cannot be adjusted accordingly to NTP server or peer. The string tells that which process has failed. The integer specifies the error for internal usage.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-SYSDB_ERR
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process was unable to work with the config space.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-4-CONFIG_INITIATED
### Response:
(Severity: 4), (Category: INFRA), (Description: ZTP successfully completed file download and started modifying the configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-FIELD_DQ_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: DPA failed to create data qualifier on this NPU.), (Recommended Action: Verify your hw-module configuration. Otherwise, collect show-tech and contact cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-CARDTYPE_READ_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing following from the admin mode 'process restart envmon location <>'. 'process restart i2c_server location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_DIR-3-ISSU_AGENT_DISCONNECT_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: The ISSU Director's Agent module encountered an issue while handling a disconnection event from an ISSU Agent client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP-6-CRYPTO_DEACT
### Response:
(Severity: 6), (Category: MGBL), (Description: The crypto pie is deactived or removed while http server is running in ssl mode.), (Recommended Action: Unconfigure http server or configure it to run in non-ssl)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECY_DRIVER-4-DELAYED_PKTS_DETECTED
### Response:
(Severity: 4), (Category: L2), (Description: Secy Driver has detected an increase in Delayed packet counters, for the specified Rx SCI. The counters increase as a result of packets coming out of order due to network latencies Or a replay attack might be taking place. Some amount of tolerance is provided with the replay window config. Packets will not be dropped as the macsec policy is in should secure mode.), (Recommended Action: Examine the cause of drops and take appropriate action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWNOMEM
### Response:
(Severity: 3), (Category: OS), (Description: Not enough resources to allocate a system structure in timer wheels.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-7-DEBUG
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: A debug message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_CRP-3-IM_RELATED_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A problem occurred when a call to IM was made.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace interface activities<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace interface activities<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TABLE_FIND
### Response:
(Severity: 3), (Category: OS), (Description: Unable to find object from table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_FGID_REFRESH
### Response:
(Severity: 3), (Category: FABRIC), (Description: An FGID entry is disabled following a parity error. A request to refresh the entry is issued.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_FGID_CONS_THREAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: This is an error message and is seen in the abnormal condition when the fgid consumer thread fails to start successfully. Fgid consumer thread will successfully start if all the asics are operationally up. If the asics do not report oper-up within the timeout period fgid_consumer thread cannot be started. As a consequence SFE Driver is restarted. avl_map is a bitmap representing all the asics that are required to be operationally up to successfully start the fgid consumer thread. The oper_up bitmap indicates the asics that are currently operationally up. The topo/oob/bpe information indicates which of the asics have received the specific (topo/oob/bpe) configuration.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-SRV6_INVALID_REMOTE_SID
### Response:
(Severity: 4), (Category: L2), (Description: An EVI/EAD route was received for a SRv6 VPWS that does not match the current configured locator format.), (Recommended Action: Perform network level review, and ensure that services are configured with matching SID formats.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-CORRUPT_LDPATH
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the installation is corrupt, or the Package infrastructure is behaving incorrectly. Processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-6-DEBUG_INIT_FAIL
### Response:
(Severity: 6), (Category: QOS), (Description: Debug initialization failed within EA. Debugs may not be printed), (Recommended Action: Try restarting QoS EA process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_CMD
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NQC-3-PAK_CSUM_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: A checksum error was detected for a packet by NCD.), (Recommended Action: The clients of NCD will attempt to recover from this situation by retransmitting the packets. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-2-HIGH_VOLTAGE_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP voltage greater than or equal to the high voltage alarm threshold. The SFP is the pluggable optics on the line cards. The voltage threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
action-3-NONE_MSG
### Response:
(Severity: 3), (Category: OS), (Description: This is a test message for action->none message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-INFO_SHM
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered a change in the shared memory region parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-NETIO_CONN_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The transport fails to open the connection to netio. This error is normally transient and it occurs when the netio process is temporarity unavailable.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IP_EA-3-ERR_INIT_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-HEALTH_MONITOR
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq driver monitors the ASIC every 5 seconds to look for any problems. If an error is reported momentarily, it could be a false positive seen during a transient state, or during oversubscription. In case, the error is seen repeatedly, please contact TAC support.), (Recommended Action: If the error persists, please contact TAC suppport.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-UIDB_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: UIDB stores the reference to ACL entries programmed in TCAM for the interface, protocol and direction. This error message is due to one of the following reasons: 1. Initialization failure of Feature EA DLL and UIDB manager interface. 2. Failure to set reference of hardware entries programmed or removed for security ACL in UIDB on configuration or system changes. This failure can lead to mismatch between hardware and software configuration.), (Recommended Action: If the failure is on initialization, process restart is done automatically. No manual action is required. If the failure is to set configuration bits in hardware on detaching a security ACL from interface, attach and detach security ACL again on the interface. In all other cases, detach ACL in the error message from all interfaces of the line card where issue is seen. Now, re-attach ACL to the interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that a failure has occured in Inventory Manager, but there is not corresponding error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-MBI_DOWNLOAD
### Response:
(Severity: 6), (Category: INSTALL), (Description: Status information while starting MBI download.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-3-CAP_CNTL_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is an error when modifying channelized interface caps.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-7-GENERIC_TILE_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The message is used to report generic info regarding tile Finite state machine.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-GROUP_CREATE_ERROR
### Response:
(Severity: 7), (Category: HA), (Description: The proxy process uses group_create() to join the proxy control group. A call to group_create() failed with the specified error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-FC40G_NOT_POWERED_ON
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A legacy fabric card (FC-40G) may only be powered on if there are no MSC140G/FP-140G cards in the router.), (Recommended Action: Replace the legacy fabric card (FC-40G) with FC-140G fabric card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-MEMBER_AIB_SET_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to insert entry to adjacency information base.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-WRITE_TEXT_DUMP_FAIL
### Response:
(Severity: 6), (Category: OS), (Description: Failed to write to the text dump file.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-SANITIZE_INIT_FAIL
### Response:
(Severity: 3), (Category: MEDIA), (Description: Error while trying to sanitize nvram during NVRAM initialization.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-5-RANDOM_DETECT_RANGE
### Response:
(Severity: 5), (Category: QOS), (Description: Configured random-detect threshold is below minimum supported value and the threshold is set to minimum supported value), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_MEM_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in FIB MPLS. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show memory location <> show cef trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred on a request to register the OSPFv3 protocol with the RIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_PM-3-NOMEM_MSGREPLY_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: sip_pm encountered a non-recoverable error A text reason and error number will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show log location <r/s/i> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show log location <r/s/i> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers sip-pm trace info location <r/s/i> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers sip-pm trace info location <r/s/i> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_12_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-7-ERR_NULL_ARGS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to create thread due to internal error.), (Recommended Action: Restart the fabio_svr process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-DATABASE_MAPPING_LIMIT_DYNAMIC_REACHED
### Response:
(Severity: 4), (Category: IP), (Description: 'This message is a warning that the dynamic local database ' 'size is either approaching its limit or has hit the limit. ' 'The limit may be reached during normal operation, if a ' '(P)ITR discovers a large number of dynamic hosts in the ' 'EID-prefix ranges enabled for dynamic learning. If the ' 'dynamic local database size limit is reached, new hosts ' 'will not be discovered. It is worth noting that it is ' 'normal for the local database to have a limit for dynamic ' 'entries, for example to set an upper limit on the amount ' 'of memory required. To diagnose this issue, it may be ' 'helpful to inspect the local database using show ip[v6] ' 'lisp [eid-table <vrf>] database. The entries can also be ' 'cleared with clear lisp[eid-table <vrf>] dynamic-eid. ' 'If this is a warning for approaching the limit, this ' 'syslog message can be turned off by removing the ' 'warning-threshold <percentage> configuration statement ' 'from the database-mapping limit dynamic configuration.'), (Recommended Action: 'If this warning persists, and traffic drops are ' 'experienced, consider re-evaluating the ' 'database-mapping-limit dynamic and if necessary ' 'configure a higher limit.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-DUP_CREATE
### Response:
(Severity: 4), (Category: SERVICES), (Description: The same service attachment has been configured on two or more interfaces, resulting in both attachments being viewed as failed and moved in to failure state.), (Recommended Action: Removing the given configuration until zero or one instances of the attachment exist will resolve this misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-CPU_HOG_4
### Response:
(Severity: 6), (Category: HA), (Description: This message is displayed after the CPU hog detector trips. It shows the percentage of CPU used by the busiest thread in the top consumer of CPU.), (Recommended Action: The command 'show watchdog trace' will display additional information about the potential CPU hog. If the hog is persistant, contact technical support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-4-UNEXPECTED
### Response:
(Severity: 4), (Category: HA), (Description: An unexpected condition encountered. This is not necessarily an error against on LRD, but may help with debugging other problems elsewhere!), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-STDBY_NOPROXY
### Response:
(Severity: 7), (Category: HA), (Description: Admin boot hold has ben set for this node (normally due to an install operation) so a chkpt_proxy has not been spawned for this process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-LOST_EVENT
### Response:
(Severity: 4), (Category: INFRA), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-3-IM_OPER_ERROR
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An interface manager related operation was unsuccessful, leaving the interface in mostly inconsistent state with respect to BNG Subscriber Redundancy. The exact reason for the failure need to be analysed based on the error string being printed. The batch operation could be to register/deregister for an interface state or add/remove of interface capusulation or update of BNG Subscriber Redundancy attribute to IM. The opearation has been retried for the specified number of times before quitting.), (Recommended Action: The error is mostly a software problem in BNG Subscriber Redundancy module or the Interface Mananger module - If interface un-registration fails, then it would not have a functionality impact on the software. It could mostly happen when interface config is removed from Subscriber Redundancy or Subscriber redundancy config is itself removed. If the config is added back the system is expected to continue to work without any further problems. - For capsulation remove error, check all Subscriber Redundancy client have been notified of the removal. For Ex: if DHCPv6 is the client, then check the dhcp v6 proxy/server interface state for SRG role. If capsulation removal is notified, then it would not have functionality impact as in the un-registration case. Else troubleshooting is required. - For all other errors trouble shooting is required. Workaround: restart srg_agt/srg_mgr process (whichever process caused error))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_RESYNC_EXCEED_IIR
### Response:
(Severity: 4), (Category: L2), (Description: The maximum number of attempts to resync with IIR have been exceeded for this bundle. The safest course of action is to restart the process and this has been done.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-UC_HI_OVR_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Unicast high priority fifo overflow error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-OS_IMAGE_DOWNLOADING
### Response:
(Severity: 5), (Category: L2), (Description: Downloading SPA OS image as indicated in the message), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-4-SWITCHOVER_ERROR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The attempt to switchover role via administrative action has failed due to specified error. This is a warning that router is still in the old role. The use of force option can be done to force the role change overriding the error condition.), (Recommended Action: Check to ensure that the role switchover is still required to be performed and if so, repeat the operation using the force option. If error persists, then it is likely an issue and needs troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CRAFT-3-CARD_IDPROM_READ
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was not able to retrieve a valid IDPROM image from the indicated card. This failure will prevent registration of detail card information to the system inventory. The card will show up with UNKNOWN card type in <CmdBold>show platform<noCmdBold> command output and however card would be fully operational even if this failure happens.), (Recommended Action: Since the CCC FPGA on RP is not able to read the Craft idprom, try physically OIR the Craft module and then insert the module to see if CCC FPGA on RP can read the Craft IDPROM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-HEADLESS_RSP_TIMER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified timer operation required to detect a potential loss of heartbeat communication with the RSP failed. This means that in the event that this card stops receiving heartbeat messages from the RSP, it might not be able to detect this and do the necessary self-reset accordingly.), (Recommended Action: Please collect the following information and contact your Cisco technical support representative. 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_BAG_ENCODE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-7-CSPF_NO_PATH
### Response:
(Severity: 7), (Category: OS), (Description: No path found.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered memory allocation error for creating statistics database or storing statistics data. This software error will cause process termination to recover during process initialization. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: This indicates a low-memory condition. Perform 'process restart <memory hog process job id>' to recover. If the issue persist, Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-7-PCI_DETAILS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Details about the error observed on the PCI bus.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-SOCKET
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified socket operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_BAG_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_DAMPENING_CLR
### Response:
(Severity: 6), (Category: L2), (Description: Exponential backoff dampening for BFD session has been cleared for the specified BFD session, either by 'clear bfd dampening' CLI command or due to 'bundle-member l3-only-mode' option being enabled for the session. Please note that dampening is not disabled for this session, but the calculated initial wait time will be applied when the session is subject to dampening again.), (Recommended Action: To disable 'l3-only-mode' option, one can use 'no bfd dampening bundle-member l3-only-mode' CLI command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: During initialization of the Forwarding-Information-Base of the CRS platform, an unexpected error has occurred. The running software should automatically recover if it isn't a hardware error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-6-BAD_SEQ_CHAN
### Response:
(Severity: 6), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_CLIENT-2-FATAL_WRAPPER
### Response:
(Severity: 2), (Category: ROUTING), (Description: A function call failed unexpectedly - this is probably a system problem), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Rx power greater than or equal to the high Rx power warning threshold. The SFP is the pluggable optics on the line cards. The Rx power threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_OTN_OOF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_THREAD_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver failed to create the specified thread. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_CHKPT_CORRUPT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: Whilst restoring one of its checkpoint tables PPPoE MA found a corrupt checkpoint entry. The entry will be ignored and so the relevant PPPoE session will be lost.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-EDM_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to start the EDM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_PLIM_SB-3-FPD_GETVER_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The FPD image version could not be retrieved from the SPA for the pogrammable device that is specified in the message text. This condition can occur if the system attempts to retrieve the version information while the SPA is not in the correct operational state.), (Recommended Action: Try to reload the affected SPA or physically remove and then insert the SPA to correct the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different SysDB planes and what is their purpose?
### Response:
SysDB is organized into different planes based on the scope and persistence of data\n- Admin plane: Contains config and state data that is available across the system. It is persistent between reloads.\n- Shared plane: Contains config and state specific to a card type (RP, LC) but shared between cards. It is persistent.\n- Local plane: Contains non-persistent state, statistics, and diagnostic data specific to a node.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-ERR_MEDIA_SINGLE_RING
### Response:
(Severity: 3), (Category: L2), (Description: SRR ring usage is changed using Inner, Outer or Both rings. There are/were multiple faults (or user requests) on the ring causing potential loss of traffic/bandwidth.), (Recommended Action: Clear the cause of each fault/wrap on the ring. Use the 'show srp topology' CLI to identify which nodes are wrapped.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-IDB_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Interface creation within fr_lmi process failed for the named interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-5-INVALID_INPUT
### Response:
(Severity: 5), (Category: IP), (Description: IPV6 received an invalid format IP packet.), (Recommended Action: If the error is seen only once it can be ignored and if it seen consistently then restarting of ipv6_ea may help.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-SINGLE_STUCK_BIT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: A stuck bit is detected in DRAM.), (Recommended Action: In-field hardware repair. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-6-SLICE_CONFIG_APPLY_DISABLED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Use LC reload to activate slice config on 1 slice LC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_NTP-5-UNUSUAL_OFFSET
### Response:
(Severity: 5), (Category: IP), (Description: The offset between the active clock source and the system clock exceeds 1000 seconds.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-FILE_WRITE_ERROR
### Response:
(Severity: 4), (Category: OS), (Description: File write failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-STARTUP_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: TACACS+ process failed to startup properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-USAGE
### Response:
(Severity: 6), (Category: OS), (Description: Usage information.), (Recommended Action: Informational message.No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-SHMEM_MIXUP
### Response:
(Severity: 3), (Category: MGBL), (Description: registry operation is failed because of invalid operation has been tried.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMS_MEM_ALLOC
### Response:
(Severity: 7), (Category: HA), (Description: Allocating memory failed due to a low-memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-6-UNSUPPORTED_XFP
### Response:
(Severity: 6), (Category: L2), (Description: The XFP inserted in the given interface is not supported on this PLIM.), (Recommended Action: Verify the XFP is supported in the hardware manuals)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_0_FIA_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error from FIA for NPU-0 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-6-MTU_NEAR_HW_LIMIT
### Response:
(Severity: 6), (Category: L2), (Description: The MTU on the interface, including any sub-interface overheads, is larger than the H/W MTU limit. Hence large frames bigger than the maximum frame size supported on the interface may be dropped.), (Recommended Action: If 802.1Q or QinQ support is required on the interface, then it is recommended that either the configured interface MTU is reduced by 4 or 8 bytes, or the sub-interface MTU is reduced by 4 or 8 bytes to ensure that all frames are within the H/W limits.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-4-IPV6_SCALE_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current ipv6 scale profile and the newly configured ipv6 scale profile. Needs attention with LC reload.), (Recommended Action: System LC is inconsistent. Need to reload the LC in order to activate the new ipv6 scale profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-RESERVE_HA_FAILURE
### Response:
(Severity: 3), (Category: LICENSE), (Description: The license reservation configuration is not the same on both the active and standby. If the standby takes over as active you will not have the same licenses available and your device may not work properly.), (Recommended Action: Change reservation configuration in either/both the nodes to match each other)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_AIS_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected AIS defect for incoming signal. AIS is usually an unframed all-ones signal. For T1 mode AIS is declared when the BITS receiver detects four or fewer zeroes in a 3ms period. For E1 mode AIS is declared when the BITS receiver detects fewer than three zeroes in two E1 frames.), (Recommended Action: 1) Ensure framing format on port matches framing format on the line. 2) Trace and check the source of AIS signal. Possibly an incorrect internal configuration in the service provider equipment, or a failure in their upstream connections.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_PIDB-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A run time error occurred during the pidb operation on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-BIND
### Response:
(Severity: 6), (Category: IP), (Description: An error occurred whilst trying to bind the local address.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-PROTOCOL_INVALID_IE
### Response:
(Severity: 4), (Category: L2), (Description: The entire PDU, or one or more IEs in the PDU, were ignored due to the given error. This indicates that the last PDU sent by the peer device was not formatted correctly.), (Recommended Action: Check that E-LMI is configured on the peer device and that the link to the peer device is functionining correctly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-EA_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM EA failed to initialize correctly. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-3-HW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Plim datapath fpga errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and can trigger a reload of the LC.), (Recommended Action: Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-MBI_BOOT_UNHOLD
### Response:
(Severity: 3), (Category: MGBL), (Description: The function sysmgr_mbi_boot_unhold failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-6-HALT_RECOVERY_DISABLE_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the NPU Driver to indicate ASIC Halted information), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-6-SPI_FBP
### Response:
(Severity: 6), (Category: FABRIC), (Description: The Fabricq asic encounted a fabric backpressure error. These sort of errors are to be expected during bootup or during OIR events, and are harmless for the vast majority of the time. The only time they would signify a serious error is if they recur for long periods.), (Recommended Action: If these messages are recurring and/or you're seeing other faults (such as traffic loss) then contact your support agent.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-1-IDPROM_INVALID
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'The IDPROM may be corrupted.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-STATS_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current stats profile and the newly configured stats profile. Needs attention with RSP reload.), (Recommended Action: System is inconsistent. Need to reload the RSP in order to activate the new stats profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
protect_debug-3-INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The PFI Protect debugging initialization failed. The error code and its text in the message will reveal the source of the error.), (Recommended Action: If the process restarts and this message is not repeating, no actions are needed. If this message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_THREAD_ATTRIBUTE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Fabric driver was unable to change the interrupt thread to an IO thread. Because of this failure, the interupt thread will not be able to receive the interupt thread events. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_CREATESG
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_ALL_FT_REMOVED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when all the fantrays are removed from the satellite. Satellite chassis shutsdown after two minutes from the time alarm is rasied.), (Recommended Action: Please insert at least one fan tray into the satellite chassis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ABORT_INCOMPLETE_INSTALL_ADD
### Response:
(Severity: 3), (Category: INSTALL), (Description: A previously requested install add operation was found to be incomplete. The operation has been aborted and install infrastructure has removed any partially installed packages.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP TTL security feature?
### Response:
The BGP TTL security feature provides a lightweight security mechanism for protecting eBGP peerings. It uses the TTL field to verify that the peer is within a specified number of hops. Packets that exceed the hop count are discarded. It is configured with the neighbor ttl-security command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
atmdrv-2-INIT_FAILURE
### Response:
(Severity: 2), (Category: L2), (Description: Above run time error occurred while initializing atm driver.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support atm <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support atm <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NSR_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An NSR operation failed. NSR features may have been disabled as a result across all sessions or only for a subset of the sessions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-MPA_IDPROM_SW_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unable to initialize MPA as IDPROM info is not available.), (Recommended Action: Please try to recover by doing the process restart of the process that generated the error. Copy the error message exactly as it appears on the screen and gather the output of the CLI 'show tech-support ethernet interfaces'. If the issue persists, contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_LIB_OPEN-3-FAILED
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS EA process encountered the specified error.), (Recommended Action: Collect error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-LSPNH_ASYNC_ERROR
### Response:
(Severity: 2), (Category: ROUTING), (Description: Failed to program lspnh object in HW, send async msg to PI-FIB for retry. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-4-EXITING
### Response:
(Severity: 4), (Category: L2), (Description: The UDLD Daemon failed to process an event, and will now exit. It should be restarted by SysMgr, allowing it to resynchronize its internal state.), (Recommended Action: The UDLD Daemon will restart automatically in an attempt to resolve the error condition. The user may also be able to identify potential system-wide issues through the error string accompanying the message and attempt to resolve these issues to assist with UDLD Daemon restarts. If the error message indicates out of memory issues Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_SOCKET-3-RESMGR_ATTACH
### Response:
(Severity: 3), (Category: L2), (Description: The atm_io process failed to advertise itself to the system as a resource manager. %s - reason for failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. restart the atm_socket process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_CREATE_CHANNELS
### Response:
(Severity: 4), (Category: L2), (Description: SSRP was unable to create the TCP channels for this group.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider firstly unconfiguring then reconfiguring the group. If this has no effect consider restarting the PPP MA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_EA-3-ADJACENCY
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error was encoutered while trying to set up adjacencny information for a VASI interface. The exact error is detailed in the error message. Packets will not be forwarded to the affected interface.), (Recommended Action: It may help to restart the affected VASI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be addressed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-I2C_DEVICE_MALFUNCTION
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA driver failed to program this i2c device. This i2c device HW could be in malfunction state.), (Recommended Action: Collect all syslogs and trace messages for IOFPGA. If the problem persists, reset the i2c device. If the device cannot be reset or the problem is not solved by that, OIR the HW module that has the i2c device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-CFG_ID_REMOVED
### Response:
(Severity: 6), (Category: L2), (Description: The user has entered new configuration for an existing domain or service that used to have an explicit ID configured without specifying the existing ID. As a result this domain or service is now using the default ID: the domain or service name.), (Recommended Action: If this was an intentional change, no action is required. If the user intended to keep the old ID, they must reconfigure it by re-entering domain or service configuration with the old explicit ID.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-CONFIG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A NULL parameter is passsed and hence configuration detail won't be available. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-CARD_ARRAY_NOT_FOUND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-PLATFORM_DATA_FILE
### Response:
(Severity: 3), (Category: OS), (Description: An error happened while reading the platform data file. In this case there will be no fallback options for that platform.), (Recommended Action: It is always recommended not to modify /etc/platform_process_dumper file. Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. copy /etc/platform_process_dumper of that node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-ITAL_CREATE_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-3-LOG_ERR_OWNER_PLANE
### Response:
(Severity: 3), (Category: OS), (Description: An error owner plane message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-SUPPORTED_PEERING_EXCEEDED
### Response:
(Severity: 5), (Category: L2), (Description: EVPN in Manual Carving mode supports a maximum of 2 PEs peering with the same Ethernet-Segment. EVPN in Automatic-Carving mode supports a maximum of 4 PEs peering with the same Ethernet-Segment. EVPN has received a peer nexthop update from BGP, which would push the number of nexthops and peers list past the supported limit. Once such an ESI route is advertised by a fifth PE (auto-carving), all PEs will display this error and will not be adding the new peer as a nexthop so as not to impact current peering and designated forwarder election results.), (Recommended Action: Configure a different static Ethernet Segment on the conflicting interface or remove the ESI on a remote PE. If removing the ESI on a PE already peering, need to add/withdraw compeltely the new problematic PE's ESI to ensure it is re-advertised.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-MSG_CHAN_DISCONNECT_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-REGEX_COMP_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Regex compilation error has occured. The command line execution would either fail or would not show proper result.), (Recommended Action: Restart parser_server process (process restart parser_server). If the message recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_FIB-3-PD_INFRA_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the SSE FIB to indicate that an error was seen when trying to access PD infra resource.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-7-ERR_SYSDB_REG_NOTIFY
### Response:
(Severity: 7), (Category: MGBL), (Description: 'The sysdb operation failed. Error test is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-REMOVE_ENCAP
### Response:
(Severity: 4), (Category: IP), (Description: An error encountered while removing caps for batch of interfaces.), (Recommended Action: Restarting IM may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: SSD encryption process init has encountered a failure.), (Recommended Action: Process restart may help to fix this initialization failure. - process restart ssd_enc_server location <> If this does not recover, please contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a user with privilege level in IOS XR?
### Response:
To configure a user with a specific privilege level, use the 'username' command in global configuration mode. R
P
/
0
/
R
S
P
0
/
C
P
U
0
:
r
o
u
t
e
r
(
c
o
n
f
i
g
)
#
u
s
e
r
n
a
m
e
 
a
d
m
i
n
 
p
r
i
v
i
l
e
g
e
 
1
5
 
s
e
c
r
e
t
 
0
 
a
d
m
i
n
1
2
3
4
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_P2MP_SRVR-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Encountered an error in debug module. This error should not impact the major functionality of the module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-ING_INV_LEN_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Invalid ingress NPH length detected on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-MSG_REPLY
### Response:
(Severity: 7), (Category: HA), (Description: A msg_reply call in the message handler failed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR1_INTR_FC_BUF_OVFLOW_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR1_INTR_FC_BUF_OVFLOW interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-CAPABILITY_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: Global L2VPN capabilities indicate the maximum number of L2VPN service instances which are programmed on all nodes and are computed by default as the minimum capability among the LCs, or as the maximum if 'l2vpn capability high-mode' is configured. This message indicated that the global L2VPN capabilities have been upgraded/downgraded and an extended ID pool has been activated/deactivated. Use 'show l2vpn capability' to check the new capabilities in use. UPGRADE The upgrade can happen either if a LC OIR occurred and the remaining LCs in the box support higher global L2VPN capabilities, or if 'l2vpn capability high-mode' is configured and at least one LC in the box supports higher global L2VPN capabilities. DOWNGRADE The downgrade can happen if 'l2vpn capability high-mode' is configured and all inserted LCs become low-scale or if a low-scale LC is inserted in an empty chassis.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_SHUTDOWN_LINK_ILITE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and cause ilte link shutdown.), (Recommended Action: An error that causes ilite link shutdown has happened and been handled Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-FSM_NVPAIR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: VPDN MGR failed process internal messages. This may be due to low memory conditions.), (Recommended Action: Allow the subscriber to reconnect. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_ADDR_CHG_REG
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register for notification of interface IP address changes. This is may be due to lack of resources or an internal error (the error message will indicate which). It requires a restart of the process for recovery.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-ERR_GET_MY_NODEID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: drp-pairing process should run on the dSC rack's active RP. Unable to get the nodeid information from platform. Software will automatically do recovery by restarting the drp_pairing process.), (Recommended Action: *RECUR* This could indicate an issue with the underlying platform infrastructure. Please check if a similar problem is reported by any other process on the node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-COMMIT_VIRT_INST_RCS
### Response:
(Severity: 3), (Category: OS), (Description: The request to commit the resources required by the named virtual service failed.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-PCIE_FATAL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSMGR-3-PARSE
### Response:
(Severity: 3), (Category: OS), (Description: An error was encountered whilst parsing the argument vector for a spawn script operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-OOB_FC_0_ERROR_ALERT
### Response:
(Severity: 1), (Category: FABRIC), (Description: Out Of Band flow control error detected for SPAUI-0 on FIA instance, traffic would be impacted.), (Recommended Action: Please reload the board in the next maintenance window. If this fault happens on a single FIA/slice on LC, the interfaces for this slice would be shutdown; if the fault happens on RSP/RP, the RSP/RP would be reloaded. If the fault could not be cleared after card OIR, please RMA the card. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCC-2-PROTO_HW
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Hardware in the specified location is a proto-type module that came from a Cisco Lab'), (Recommended Action: 'Contact TAC')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_1_FIADDR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-1 from FIA DDR on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-COPY_MBI_FILE_NAME_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The MBI file name is possibly too large or invalid. The MBI operation in progress may fail. %s - indicates the location of the error. %s - indicates the error itself.), (Recommended Action: Check that the MBI name is of a valid format (check against a known good string). If obviously invalid or corrupt, reload the node, but only after collecting the below information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-ERR_CREATE_EVENTMGR
### Response:
(Severity: 3), (Category: IP), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_CR_INTR_CR_AB_FC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_CR_INTR_CR_AB_FC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTLIB-4-DBG_REG_WARN
### Response:
(Severity: 4), (Category: SERVICES), (Description: Due to an internal error the debug event was not registered. The debug feature will not be available for this process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-4-HEADLESS_SDR_STATE
### Response:
(Severity: 4), (Category: HA), (Description: Headless SDR condition was detected. The local card is being reset. This is not necessarily an error condition!), (Recommended Action: Make sure the dSDRSC is up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-6-VM_ACTIVATE_STATUS
### Response:
(Severity: 6), (Category: OS), (Description: VM activate/deactivate status.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-4-POISON_PILL_FORUS_PAK
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Ethernet driver received a poison pill for us packet.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_XAUI_RDY_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI not ready on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER_RSP4-4-FAN_TRAY_0_REMOVED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_MPLS-3-WARNING_INFO
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv6 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|mpls] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an SNMP community in IOS XR?
### Response:
To configure an SNMP community for network monitoring, use the 'snmp-server community' command. RP/0/RSP0/CPU0:router(config)#snmp-server community public ro
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_SKP-7-ERR_EDM_REGISTER
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-SKYWARP library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE6_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE6_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SERVICE_EA-3-ERR_DEBUG_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to initialize debug events.), (Recommended Action: Restart the process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMRP-3-REG_CREATE_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred when attempting to add the registration to the internal process database. This pseudowire will not have traffic flooded to it for this I-SID.), (Recommended Action: The error may indicate a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX_PLUGIN-3-LINK_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: PLX ports/link are enabled or disabled on RP/SC and CPU less cards based on RP/SC card reloads OR CPU less card reloads. During which link enable/disable operations might fail. These failure could cause devices on remote cards to be not seen and eventually cards to be reloaded.), (Recommended Action: wait for system recovery. That is ESD/SFE driver reloading the cards. Collect 'show tech-support ctrace')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_NETIO-3-INIT_TRACE
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of tracing for the NetIO caps. This will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-EOBC_LINK_EXCESS_ERR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link on epm switch device has excess errors), (Recommended Action: '*show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-6-IPACCESSLOGNP
### Response:
(Severity: 6), (Category: ACL), (Description: A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option and matches with the IP protocol type other than TCP, UDP, SCTP, IGMP, ICMP and 'standard ACL'. This message is seen for the first match and for each match after the hit count is greater than 0x7FFFFFFF(2147483647).), (Recommended Action: This is information only message, no action required No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_INOTIFY_PERM
### Response:
(Severity: 3), (Category: MGBL), (Description: mirror_server cannot sync a directory it cannot read.), (Recommended Action: Use chmod to change the read restrictions on the directory to be permissive enough for mirror_server to read.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_1_FIA_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error from FIA for NPU-1 on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-EVENT_MANAGER_CREATE
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to event_manager_create() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED_LIB-7-MSG_SEND
### Response:
(Severity: 7), (Category: OS), (Description: An attempt to send a message to the placed server failed with the specified reason. It may be the case that placed server had been restarted.), (Recommended Action: Collect the function name and traceback information. show commands: Issue 'show proc placed' to check if placed has restarted. Collect show tech placed, show tech sysmgr and forward to your next level of technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-ERR_DSC_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The dsc process failed in initialization. This indicates that there was a software error during initialization.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If it is still non-operational, restart the driver by executing the following command at the CLI of the active RP: 'process restart dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_EXITING
### Response:
(Severity: 3), (Category: IP), (Description: The Telnet Server has encountered an unexpected error while using the system library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install update command in IOS XR?
### Response:
The 'install update' command is used to update the active software set to a newer version. It performs the necessary checks, activates the new packages, and commits them as persistent.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-INVALID_AUTHOR_TYPE
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_REX-3-SYSDB
### Response:
(Severity: 3), (Category: SERVICES), (Description: The diversion manager was unable to communicate with SysDB. Notifications may be missed, and manageability functionality may not be available.), (Recommended Action: Check the status of SysDB, and restart the SysDB and firewall controller processes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_FAB_LICENSE-2-RSP3L_FAB_LIC_RELOAD_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: A9K-RSP440L-ALIC feature license is configured, need LC reload to make it effective.), (Recommended Action: 'A9K-RSP440L-ALIC feature license has changed. To move to higher or lower fabric speed, System ((admin)#reload location all) or LCs mentioned should be reloaded. Use '(admin)#reload location 0/X/CPU0' command to reload LCs mentioned here.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-ERASE_CONFIG_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to erase classic config.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-0-FABRIC_LOSS_LC_RELOAD
### Response:
(Severity: 0), (Category: FABRIC), (Description: A line-card is reloading after detecting that it has totally lost connectivity to the fabric. If all the fabric boards are OIR'ed or brought down through CLI, this is expected. If this message occurs otherwise, it could be due to a software error.), (Recommended Action: If the fabric planes are brought down or the S3->Sponge links are brought down intentionally, then this is expected. If the problem happens otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-3-SYSDB_REG_NOTIFY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The policy_repository process failed to register for notification of changes on the displayed database path.), (Recommended Action: The policy_repository process must be restarted before it can function correctly. If the message appears again, copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-GROUP
### Response:
(Severity: 3), (Category: OS), (Description: A call to a group services interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PM_SHUT
### Response:
(Severity: 6), (Category: INFRA), (Description: The Process Manager initiated a shutdown of ESD. This may be part of normal operation or due to some fatal error.), (Recommended Action: Determine if the event was due to a fault. If so, the root cause of the PM shut needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp graceful-restart' command in IOS XR BGP configuration?
### Response:
The 'bgp graceful-restart' command is used to enable the BGP Graceful Restart capability. Graceful Restart allows a BGP speaker to continue forwarding traffic while the BGP process is restarting, thus avoiding traffic loss during a planned or unplanned BGP restart. It requires the BGP peers to also support the Graceful Restart capability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IPSEC_OPEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to open an IPSec SA for the named interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the additional following commands: - show tech-support routing ospfv3 detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-3-FILE_WRITE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Failed to write to file.), (Recommended Action: The write operation on the file specified in the error failed during ltrace configuration processing. If the error message indicates a retry, then re-commit the ltrace configuration. Else if the filesystem being written to is invalid, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-INIT_PERMIT_DENY_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed initialize internal permit/deny entries for IPv4/IPv6. These entries are needed for programming/removal of hardware entries for IPv4/IPv6 security ACLs.), (Recommended Action: A process will be initiated by the software. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If restart din't fix the problem)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IMC
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error communicating with Interface Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Interface Manager Control Server, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-7-REGISTER_CERRNO
### Response:
(Severity: 7), (Category: IP), (Description: The domain_services process failed to register its specific cerrno codes and messages.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-IMPLICIT_DOWNLOAD_COMPLETE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: A previously stuck or failing implicit download has now successfully completed.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-IMPLICIT_WILL_EXPIRE
### Response:
(Severity: 4), (Category: LICENSE), (Description: The period after initial boot during which licensed features can be used without licenses will end in the indicated time. Licensed features without licenses will cease to operate and cannot be configured after that time. The message will appear every day during the implicit license period, even if there are no licensed features configured without licenses.), (Recommended Action: In order to use licensed features, contact Cisco to purchase permanent licenses then install them using the 'license add' command in admin mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP6
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-6-RELOAD_REASON
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message is the reset status values of card.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP local-as feature?
### Response:
The BGP local-as feature allows a router to appear to be a member of a second AS in addition to its real AS. This is useful in situations like AS migrations. The local AS is added to the AS path of inbound updates and removed from outbound updates. It is configured with the neighbor local-as command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XRV9K_UIDB-7-ERR_INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of uidb_svr process has failed due to one of the following reasons: 1) Failed to create server context. 2) Failed to get schedular parameters. 3) Failed to initialize event manager. This would prevent process from receiving events. 4) Failed to register with debug. This would prevent process from logging debug messages. 5) Failed to bind UIDB server with MIPC server. This is needed to program features in hardware. 6) Failed to connect to PLIM asic processes. This is needed to program features in hardware. 7) Failed to initialize checkpoint. This is needed to checkpoint UIDB data to restore on process restart. 8) Failed to allocate, initialize and checkpoint shadow memory. This is needed to store and restore UIDB internal data. 9) Failed to get metro asic version. 10) Failed to attach event handlers needed to handle LWM messages. This is needed to enable/disable various features in hardware. 11) Various Sysdb or EDM failures 12) event_block failed. This indicates process has encountered unexpected error while waiting for events.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-3-SYSDB_REG
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to register for receipt of the given notifications or receipt of the verification event. This could be due to a low memory condition or an internal software error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-3-SET_BOOTORDER_USB
### Response:
(Severity: 3), (Category: INFRA), (Description: SCTRL NCS5K Error in Setting BootOrder for Extnernal usb, for exact info view the '%s' msg displayed.), (Recommended Action: Check External USB is detected from host on first occurence. In case of repeated failure contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-EDM_LIST
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to add/create sonetmib item into sysdb_edm_list got failed. first %s - Type of failure in sysdb_edm_list second %s - Reason of failure), (Recommended Action: Collect following outputs: - show logging - show tech-support sysdb - show sonet-local trace info location <> - show sonetmib trace location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA-3-DOWNLOAD_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The Multicast Port Arbitrator was unable to download one or more multicast joins to a restarting instance of its consumer on the specified node.), (Recommended Action: Do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTS-3-IO_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred during I/O an operation.), (Recommended Action: Check the stacktrace, analyze TCP stats, etc.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_DEBUG
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the debug service. The error message describes what operation has failed and why it failed. The error could be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-4-CFG_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Service Enablement config failed(CJ-FIXME).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMIB-3-SYSDB_ACCESS
### Response:
(Severity: 3), (Category: SNMP), (Description: The MIB had trouble reading from or writing to or binding/unbinding SysDB.), (Recommended Action: Restarting of mibd_interface process and sysdb should solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is Embedded Event Manager (EEM) in Cisco IOS XR?
### Response:
Embedded Event Manager (EEM) is a powerful tool in Cisco IOS XR that allows you to automate tasks and respond to system events in real-time. It provides event detectors, policies, and actions that can be customized to perform specific operations based on triggered events.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LOCK_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: The indicated error occurred while attempting to hold or release a lock.), (Recommended Action: Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-4-CERR_REGISTER
### Response:
(Severity: 4), (Category: SECURITY), (Description: tacacsd failed to register error codes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-6-INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: ACE driver Informational message), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY_LIB-3-SYSDBFAIL
### Response:
(Severity: 3), (Category: OS), (Description: An attempt to retrieve (or set) a sysdb item or list failed. This could be a transient problem that may be fixed by restarting the filecopy_process - note well that restarting this process could result in loss of data. If restarting the process does not solve this problem, please capture any contextual information from the CLI, contact your customer support representative and file a bug against the infra-filecopy-srv component.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-FPD_SELECT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured while selecting FPD subtype.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-INTF_IM_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: *SUPPORT*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_14_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-5-RSVP_MSG_RCVD_LARGE_MSG_LEN
### Response:
(Severity: 5), (Category: ROUTING), (Description: The router received an RSVP message with a large object length. It may be possible in some cases where there is large number of hops. It may also be possible that packet is malformed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Check if this is legimate RSVP message otherwise please contact support. RSVP packets with this large size will be dropped and their corresponding LSPs may flap.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-7-CBC_POST_RESET_NOTIFICATION
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Informational log only), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the inventory manager process in IOS XR?
### Response:
The inventory manager process maintains an inventory of the cards installed in the system, including their current state and other relevant information.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_SBE_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA01 burst FIFO single bit error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-INTF_CAPABILITIES_LOOKUP_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The ethernet_link_oam_daemon has failed to determine the capabilities of a particular interface. 802.3 OAM configuration will be verified according to the global card capabilities. For certain interface types, this may result in configuration for a particular feature such as UDLF being incorrectly applied to an interface that does not support it. Operation of the protocol is unaffected and any unsupported configuration will be ignored.), (Recommended Action: This issue indicates that there was a problem retrieving interface capabilities for a specific card. This may affect your configuration. Attempt to remove and reapply any configuration changes you have made, if this fails call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-BAD_CANCEL_TYPE
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_2_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-INVENTORY_FIELD_NOT_NUMBER
### Response:
(Severity: 3), (Category: MGBL), (Description: Rack/slot/module are stored as sysdb path in inventory DB. They are essentially numbers. So either rack/slot/module are not numbers, or the path is incorrect.), (Recommended Action: Restart parser_server process (process restart parser_server). If the message recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_CFG-3-EXIT_PROCESS
### Response:
(Severity: 3), (Category: FABRIC), (Description: The npu config failed to create/init essential component. The driver will be non-operational due to this error.), (Recommended Action: The Proxy will recover by restarting. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-INDUCED_SHELFMGR_NOTIF
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that shelfmgr was induced to send out a notification for the given node by the user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-UIDB_INIT_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: UIDB stores the reference to ACL entries programmed in TCAM for the interface, protocol and direction. This error message is due to initialization failure of the Feature EA DLL and the UIDB manager interface.), (Recommended Action: Process restart is done automatically. No manual action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_CONNECT-7-LWM
### Response:
(Severity: 7), (Category: MGBL), (Description: The TTY Connection library encountered an unexpected error whilst communicating with the TTY Server.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-6-KEEPALIVE_MISS
### Response:
(Severity: 6), (Category: IP), (Description: NSR is brought down for sessions protected on partner node because of missing keepalives), (Recommended Action: Understand why standby is not healthy and take the necessary steps such as collecting core file, traces etc. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-FEEDBACK_OUT_OF_ORDER
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_9_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-4-MIDPLANE_INCOMPATIBLE_FOR_CARD
### Response:
(Severity: 4), (Category: FABRIC), (Description: Midplane of this FC is not compatible with the Midplane which is loaded on this router. This card will be isolated from fabric subsystem POV.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-INIT_MEM_MANAGER_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Failure in initializing lib memory manager.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-FPGA_PCI_FATAL_AER
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BCE_PBU_PREFIX_SET_DO_NOT_MATCH
### Response:
(Severity: 3), (Category: IP), (Description: HNP received in the Re-Registration PBU does not match with the HNPs.), (Recommended Action: If the IPv6 address on the interface on the MAG that hosts the HNP changed, then restore it back to the address that was previsouly configured. Note the NAI of the MN from the error message and run the following command to find out the prefix(es) on the binding. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ipv6 mobile pmipv6 lma binding nai <NAI><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ipv6 mobile pmipv6 lma binding nai <NAI><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Alternatively, delete the binding on the LMA using the following command and let the bidning come up with the next PBU from the MAG with the latest address configured on the home interface. <CmdBold> clear ipv6 mobile pmipv6 lma binding nai <NAI> <NoCmdBold> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CCB_NODENAME_CREATION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager failed to create a node name based on the supplied rack, slot, and instance.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the Local Packet Transport Service (LPTS) and what is its purpose?
### Response:
The Local Packet Transport Service (LPTS) is a feature that helps protect the control plane and management plane from denial-of-service (DoS) attacks. It uses a combination of an access control list, a rate limiter, and flow classification to police local traffic destined to the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-SYSMGR
### Response:
(Severity: 3), (Category: OS), (Description: SYSMGR failed to reply.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-PUF_WRITE_ERR
### Response:
(Severity: 3), (Category: OS), (Description: This indicate a failure to create the timezone configuration file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM_SERVER-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: The initialization of the primitive source manager server process failed due to the indicated reason.), (Recommended Action: None. The process initialization will be retried automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-INTERFACE_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed to correctly handle a create event for an interface which it was tracking.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-TOOMANY_OUTSTANDING_RIBBUF
### Response:
(Severity: 3), (Category: ROUTING), (Description: Too many rib buffer allocated by the SPF thread but not consumed by RIB thread this could be due to too many SPF run during a short window or rib thread is blocked.), (Recommended Action: please check by so many spf have run check the spf throttle timers values check min lsa arrival is not zero and check show process blocked.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-MISSVALUE
### Response:
(Severity: 4), (Category: MGBL), (Description: The command entered requires an object value and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-HW_RETRY
### Response:
(Severity: 4), (Category: OS), (Description: Hardware pre-ifib returned an error during a update retry operation.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_CFG-1-ERR_WARNING_RDM_CFG_MISMATCH_LOC
### Response:
(Severity: 1), (Category: L2), (Description: The user configuration has caused an inconsistency in the interface hardware profile.), (Recommended Action: Please reload the node to remove the inconsistency. To reload use the command 'hw-module location <> reload ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-LTRACE_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ltrace initialization failed. This may be a program level error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-PS_NOT_PRESENT_ALARM
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Two possibilities to this message 1) An alarm has occured. 2) A previously occured alarm has been cleared. power supply not present.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-3-UNCORR_DDR_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A ECC/replay uncorrectable has occurred from the DDR module of the Linecard's CPU complex. The message will display the name, description, and error log. The linecard will reload after a certain threshold of number of occurances have been reached.), (Recommended Action: Contact support with the required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-3-MEMORY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates failure in memory allocation/mapping. This will lead to incomplete initialisation of the driver, hence the software functionality will be impacted.), (Recommended Action: restart the smith process if it is a map failure (as would have been indicated by the message) 'process restart <process> loc <>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIMER-3-TWMUTEXUNLOCKERROR
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred releasing a mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'import route-target' and 'export route-target' commands in L3VPN configuration?
### Response:
The 'import route-target' command specifies which routes the VRF should import from other VRFs. The 'export route-target' command specifies which routes the VRF should export to other VRFs. These commands are used to establish the VPN topology by controlling the exchange of routes between VRFs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP_POLICY-3-ORA_INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-THREAD_CNT_MINOR
### Response:
(Severity: 3), (Category: HA), (Description: When number of threads has crossed above MINOR Threshold Percentage.), (Recommended Action: The number of processes running has increased. Determine if there are any unnecessary threads available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-JID_GET_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: process's JobID can not be obtained), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-3-ERR_FGID_DOWNLOAD_DONE_NOTIF
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID BCDL Consumer encountered an error while notifying the SFE driver about FGID download completion. This indicates a problem with communication between SFE_DRVR and FGID BCDL consumer. Restart SFE driver manually.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_ET0_INTR_MISSING_SOP_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_ET0_INTR_MISSING_SOP interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZEN-4-BLOCK_PROTECTION_DISABLED
### Response:
(Severity: 4), (Category: INFRA), (Description: Block protection should not be configured if we are running non-secure boot image: - The flash is a SPANSION part that was bad configured, so it is protected by default after every power-cycle.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is BGP conditional route advertisement?
### Response:
BGP conditional advertisement allows a route to be advertised to a neighbor only if another route exists in the BGP table. It is configured using the advertise-map and exist-map options under the neighbor. The advertise-map specifies the routes to advertise and the exist-map specifies the conditions that must be satisfied.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_CONN_NOTIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-HW_DETECTED_ERROR_PCI_PM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver HW error interrupt handler was invoked and found valid PCI PM error registers.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-SUPERSTAR_VOLTAGE_SUPPLY_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: As soon as power is asserted on S2 card, s/w will read power good reister for superstar fabric cards. If power good register bits are low, it indicates that the superstar fabric card is not having a good power and the i2c power ON is possibly failed.), (Recommended Action: Please collect required_info log/traces and try to recover by reloading the S2 card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALPHA_DRIVER-2-CHASSIS_RELOAD_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The Alpha Driver attempt to reload chassis has failed. Please reload the chassis.), (Recommended Action: This log is just to notify that there has been a failure when we attempted to reload the chassis. Please perform a manual chassis reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'autonomic debug error'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-NM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed NM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-REPLICA_NAME
### Response:
(Severity: 7), (Category: HA), (Description: A replica name passed to the Replicator Library was truncated. This is not an issue in itself, but may cause problems further down the line, if the replica name becomes non-unique within the system.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-NSR_SYNC_IPC_XPORT_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: LDP encountered too many consecutive transport errors while trying to send NSR messages which triggers NSR sync again.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-BPARAMS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error in boot parameters reception occurred in Services PLIM. Cause of the error will be mentioned in the message displayed. This error blocks Application Launch on Services PLIM.), (Recommended Action: Do warm reload of Services PLIM MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-3-ACE_SYSLOG_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: ACE SPA SYSLOG message), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-RECORD_TYPE_UNKNOWN
### Response:
(Severity: 7), (Category: OS), (Description: A feature record has an unknown record type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-XR_CLI_ACC
### Response:
(Severity: 3), (Category: MGBL), (Description: xr_cli_acc hit an error), (Recommended Action: You made a mistake in the way you used xr_cli_acc, so most likely the fix is to more carefully examine the exact error message and consult the docs on how to fix your mistake. If it truly is not your error, then save the output of 'show logging'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HM-4-FPING_INCOMPLETE
### Response:
(Severity: 4), (Category: HA), (Description: HA Health Monitor Fabric ping test sequence failed to complete. If there were any errors before it got disrupted, then these are reported separately. The test will be restarted again at next HM fping interval. If there are no other errors reported, this warning is rarely a cause for concern, unless it very frequently causes only a partial set of HM fabric pings to be completed.), (Recommended Action: No action is required because HA Health Monitor will retry Fabric ping again)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_SVR-3-MUTEX_DESTROY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to create the mutex.), (Recommended Action: Restart the process to recover from the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-NO_KNOWN_MEDIA_DRIVERS
### Response:
(Severity: 4), (Category: L2), (Description: CDP failed to initialize the media module because it could not find any media drivers that it recognizes. This may be a normal situation if CDP does not support the interface types on this node. In other circumstances CDP should recover automatically by restarting.), (Recommended Action: There are no media drivers for the interfaces on this node. If CDP does not support the interface types on this node then this could be a normal situation Otherwise Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-EA_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: EA failed to apply the config.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-7-SYSDB_BULKING
### Response:
(Severity: 7), (Category: MGBL), (Description: An unexpected error occurred when interacting with SysDB's bulking API.), (Recommended Action: Debug message only. No action is required. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-MALLOC_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: A memory allocation has failed in a situation where MRP cannot continue without possibly being in the wrong state.), (Recommended Action: Restart the MRP application.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-BPDU_INCORRECT_SAP
### Response:
(Severity: 3), (Category: L2), (Description: STP received a BPDU with the wrong SAP, most likely belonging to a different protocol.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-PLUGIN_LOAD_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error was encountered while trying to load an SPP plugin library. The plugin will not be used. Packets may not be sent or received correctly for the affected location.), (Recommended Action: This problem may indicate an incompatible version of a plugin library has been installed. If the problem was triggered by an install operation, reversing the operation may fix the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-2-CRIT_EXIT
### Response:
(Severity: 2), (Category: L2), (Description: An critical error occurred in PSE Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-2-INCONSISTENT_CONFIG_ALARM
### Response:
(Severity: 2), (Category: SYSDB), (Description: Sysdb detected a possible configuration inconsistency but was unable to clear it. Sysdb attempted to set the configuration inconsistency alarm tuple.), (Recommended Action: If 'clear configuration inconsistency' does not complete successfully, then the router needs to be reloaded and re-configured to resume normal operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-ERRRCV
### Response:
(Severity: 4), (Category: ROUTING), (Description: An invalid OSPF packet was received. Details are included in the error message. The cause might be a misconfigured OSPF or an internal error in the sender.), (Recommended Action: Check the OSPF configuration of the receiver and the sender for inconsistency. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-5-SW_RESYNC
### Response:
(Severity: 5), (Category: INFRA), (Description: The specified node needs to refresh its software base. It will resync with the rest of the system, then reboot.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUMP-3-INTERNALERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_LANE_REPAIR_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the SBUS Driver to indicate that a lane repair operation has failed on the specified HBM memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RAW-3-NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the RAW process try to request more memory. The requested operation by raw could not be accomplished because of a low memory condition.), (Recommended Action: In the problem recurs, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-QSFP_PWR_GOOD
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a Power fault on the QSFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the QSFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-FILEREAD
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred during a read operation from the instruction file.), (Recommended Action: Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP maximum prefixes for MPLS L3VPN?
### Response:
To configure BGP maximum prefixes for MPLS L3VPN, use the 'maximum-prefix' command in BGP neighbor configuration mode. router bgp 65000
address-family vpnv4 unicast
neighbor 10.1.1.2 maximum-prefix 1000
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-7-CLIENT_NORESPONSE
### Response:
(Severity: 7), (Category: LICENSE), (Description: A license client program failed to respond. This may be due to some inter-process communications problem, or because the client process is blocked.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_INTF_FW_NOTFOUND
### Response:
(Severity: 3), (Category: SECURITY), (Description: The Firewall Controller has been informed of diversion removal for an interface, but found that the relevant firewall does not exist in the database. This error message indicates an inconsistency in the firewall database, which will cause the Firewall Controller process to restart.), (Recommended Action: The Firewall Controller will restart, no user intervention is required. If the problem persists, contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-2-EPM_SWITCH_FAULT_FATAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: router's internal communication device EPM switch is down), (Recommended Action: The board will be reloaded. Switchover would occur if standby RP2 is NSR ready. At this stage please collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_UCORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE uncorrectable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Crossbar driver Event Manager notify error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCTL-3-GSP_MSG_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the internal communication channel among pctl threads is broken i.e. shelfmgr gsp interaction for node down notifs failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-EVENT_MANAGER
### Response:
(Severity: 3), (Category: OS), (Description: A call to an event manager interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-COMPARE_ALREADY_SET
### Response:
(Severity: 3), (Category: MGBL), (Description: internal data structure state was attempted to overwrite.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-PROC_CNT_CRITICAL
### Response:
(Severity: 3), (Category: HA), (Description: When number of processes has crossed above CRITICAL Threshold Percentage.), (Recommended Action: The number of processes running has increased. Determine if there are any unnecessary processes available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OAMMIB-3-NO_DEBUG
### Response:
(Severity: 3), (Category: L2), (Description: In the initialization of the OAM MIB DLL an error occurred whilst attempting to register for debugging. Consequently there will be no debug output from the OAM MIB DLL.), (Recommended Action: Continue working with the OAM MIB DLL without any debugging taking place or restart the DLL such that during initialization there is another attempt register for debugging.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_SERDES_2_FAIL_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data serdes link 2 failure on FIA 1.), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-4-REFRESH_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The SVII Adjacency Manager encountered an error while resynchronising its adjacencies. The adjacencies for the specified service may not be correctly set up on the specified card, meaning that traffic for that service arriving at that card may not be forwarded correctly.), (Recommended Action: Restarting the 'svi_adj_mgr' process on the affected node (after any other problems - such as lack of memory - have been cleared up) will restore adjacencies for the affected service. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_MFWD_FRETTA-3-ERR_NO_HW_RESOURCES
### Response:
(Severity: 3), (Category: ROUTING), (Description: No hw resources are allocated for this routes clear mfib ipv4 database location <>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSHD-3-ERR_SOCKET
### Response:
(Severity: 3), (Category: IP), (Description: Internal warnings related to socket operations), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-6-ATM_PCI
### Response:
(Severity: 6), (Category: L2), (Description: An info regarding the ATM PCI, while converting it to VPI and VCI. first %s - Happened at second %x - Hex value for the PCI), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-4-SIA_UPGRADE
### Response:
(Severity: 4), (Category: LICENSE), (Description: Software upgrades are allowed but will be blocked after the SIA grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Rectify the SIA Out of Compliance as soon as possible.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-FETCHING_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to download configuration from the server.), (Recommended Action: Verify network connectivity.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-THREAD_JOIN_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: A internal timed thread join operation has failed. This is a bug.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_SYSMON-3-PROC_CNT_CRITICAL
### Response:
(Severity: 3), (Category: INFRA), (Description: When number of processes/threads has crossed above CRITICAL Threshold Percentage.), (Recommended Action: The number of processes/threads running has increased. Determine if there are any unnecessary processes available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-UNEXP_INT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An interrupt pulse was received by SPP from the OS, but no handler was registered to take appropriate action. This indicates a problem in an SPP plug-in, which has registered for receiving the interrupt, but has not registered a corresponding handler. It is likely that ingress packets will be dropped.), (Recommended Action: Restarting the process may help to resynchronize the system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-SATELLITE_UPGRADE_UNSCHEDULED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-6-DELETED_NEIGHBOR
### Response:
(Severity: 6), (Category: L2), (Description: An entry has been removed from the CDP neighbors table. Notification of deleted CDP neighbors requested through 'cdp log adjacency changes'.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-HIGH_3_3VCC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high in 3.3Vcc voltage. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-2-CHOWN_BUF_FAILED_XFER_BACK_TO_CLIENT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Failed to change buffman ownership from server to client), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_Manager-1-UPGRADE_ALERT
### Response:
(Severity: 1), (Category: INFRA), (Description: Update FPD upgrade alert), (Recommended Action: Customer immediately knows the upgrade status.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_LONG_PKT_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress long packet detected on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_TCAM_RM-6-HIGH_WATER_MARK
### Response:
(Severity: 6), (Category: L2), (Description: The TCAM device has limited number of free cells left to allocate.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fia config (fia_cfg) failed to create an event manager during the initialization. The driver will be non-operational due to this error.), (Recommended Action: The fia_cfg will recover by restarting. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a GRE tunnel?
### Response:
To configure a GRE tunnel, use the 'interface Tunnel' command in global configuration mode. RP/0/RP0/CPU0:router(config)#interface Tunnel0
RP/0/RP0/CPU0:router(config-if)#tunnel mode gre ipv4
RP/0/RP0/CPU0:router(config-if)#tunnel source GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)#tunnel destination 192.168.2.1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2CCTRL-2-STUCK_LOW
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A Device on the I2C bus is stuck, holding the bus low), (Recommended Action: Please attempt to correct the error by reloading the card by issuing the command in admin mode -reload location <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-UPTIME_HIST_INVALID_TASKID
### Response:
(Severity: 7), (Category: OS), (Description: This record has invalid block_and_task_id.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng auto-tunnel backup affinity' command in IOS XR?
### Response:
The 'mpls traffic-eng auto-tunnel backup affinity' command is used to configure the affinity properties for auto-tunnel backup tunnels. Affinity is a way to control the links that a tunnel can use based on administrative attributes assigned to the links. The affinity properties for auto-tunnel backup determine which links the automatically created backup tunnels can use, providing a way to steer backup tunnels over specific links or away from others.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support lawful intercept of traffic?
### Response:
Cisco IOS XR supports lawful intercept using the Cisco Service Independent Intercept (SII) architecture. This allows law enforcement agencies to conduct electronic
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you configure IS-IS to support Nonstop Forwarding (NSF)?
### Response:
NSF is enabled by default when IS-IS is configured. It allows the router to continue forwarding traffic during a processor switchover. The 'nsf lifetime' command can be used to configure the maximum time that the router will wait for neighbor routers to restore the IS-IS adjacencies after a switchover.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-7-UNEXPECTED
### Response:
(Severity: 7), (Category: OS), (Description: An unexpected condition encountered. This is not necessarily an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-RX_PLL_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5346 RX PLL loss of lock detected/cleared for RSP), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-2-CONFIG_NOT_READY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The shelfmgr could not fully initialize due to not receiving indication of the loading of the router running config having completed. If this error happens line cards may not be booted by shelfmgr.), (Recommended Action: 1. Please run 'show platform' command. If the LCs are not in 'IOS XR RUN', issue the following command on the LCs one at a time: 'hw-module location <LC location> reload' 2. If the LCs now bootup and reach IOS XR RUN, the system is operational and this error is not service affecting at this point, please collect the following and report the problem to your Cisco technical representative: <CmdBold>show run<NoCmdBold> <CmdBold>show tech-support shelfmgr<NoCmdBold> <CmdBold>show tech-support cfgmgr<NoCmdBold> <CmdBold>show tech-support sysmgr<NoCmdBold> <CmdBold>show version<NoCmdBold> 3. If the LCs do not boot up, please wait 5 minutes and try to boot them again. This is better than reloading the entire router, as it gives the config time to complete. Repeat this step for a total of 3 times, if needed. If still there is no recovery, please collect the above information and contact your Cisco technical representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-3-UNKNOWN_FSMSTATE
### Response:
(Severity: 3), (Category: L2), (Description: The FSM has got into an invalid state), (Recommended Action: Restart the SFRAR/SAAR processes (contain the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-3-PCDS_INIT_FAILED
### Response:
(Severity: 3), (Category: HA), (Description: An unexpected error condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_MQ_FULL_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 0 MQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_VLAN_SES_LIMIT_NOT_REACHED
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular VLAN on the given access interface iss no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-RENAME_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A file involved in the current request or operation could not be renamed. This may impact install infrastructure functioning.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-IPTNLNH_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the OFA FIB to indicate that ip tunnel destincation cannot be reachable over mpls label path), (Recommended Action: Remove the conflicting mpls configuration. Please collect the console log, show tech-support platform-fwd.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP Rx power greater than or equal to the high Rx power alarm threshold. The XFP is the pluggable optics on the line cards. The Rx power threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDS-4-INVALID_CLIENT_NODEID
### Response:
(Severity: 4), (Category: INSTALL), (Description: Install helper on a particular node passed an incorrect nodeid to install director. The error will be returned to install helper.), (Recommended Action: Collect insthelper traces from the reported nodes using 'show install trace insthelper'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_BRST_SHRT_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA01 Tx burst short error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-LINUX_LOOPBACK_ADDRESS_UPDATE_FAIL
### Response:
(Severity: 4), (Category: INFRA), (Description: XLNCd is responsible for keeping the networking stacks for IOS XR and Linux synchronized. Certain IOS XR interfaces only have L3 reachability, provided by having their IP addresses added to the Linux loopback device in the network namespace corresponding to the IOS XR VRF the address is configured in. This message indicates that XLNCd encountered an error while attempting to add or remove the specified address from the Linux loopback device. This may result traffic sourced from Linux applications being sent with the wrong source IP address, or received traffic destined to Linux applications not being processed correctly.), (Recommended Action: If the system is experiencing memory exhaustion, resolve other issues that may be causing this failure state, then attempt to recover by restarting XLNCd: <CLI> process restart xlncd </CLI> If the problem persists, inconsistencies between Linux and IOS XR can be observed by comparing the output of <CLI> show linux networking interfaces address-only </CLI> for the IOS XR VRF and <CLI> run ip netns exec <netns-name> ip addr show dev lo </CLI> IPv4 addresses that are missing from Linux can be added using <CLI> run ip netns exec <netns-name> ip addr add <ip> dev lo </CLI> Extra IPv4 addresses can be removed from Linux using <CLI> run ip netns exec <netns-name> ip addr del <ip> dev lo </CLI> IPv6 addresses that are missing from Linux can be added using <CLI> run ip netns exec <netns-name> ip -6 addr add <ip> dev lo </CLI> Extra IPv6 addresses can be removed from Linux using <CLI> run ip netns exec <netns-name> ip -6 addr del <ip> dev lo </CLI> Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-7-BUS_HANG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Detected i2c bus hang.), (Recommended Action: Please collect required_info log/trace and contact Cisco technical support representative with representative with required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-7-TERMINATED
### Response:
(Severity: 7), (Category: INFRA), (Description: ZTP terminated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR implement OSPF configuration with its hierarchical CLI structure?
### Response:
In Cisco IOS XR, OSPF configuration uses a hierarchical CLI structure. The top level is the global OSPF configuration, then the area configuration, and then the interface configuration. Parameters are inherited downward, allowing granular customization at each level.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ACCESS_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-7-ERR_BAG_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: EDM Bags are used to share information between components using sysdb. This Error indicates that bag registration failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_V6FIB_RP-3-VPNV6_OUT_OF_SEQ_FREE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform independent FIB is freeing a VPNv6 leaf before any of the VPNv6 gtrie completes its re-initialization after restarting process fib_mgr. It is an internal software error. It is caused either by a sequencing error in platform indepedent FIB software or by VPNv6 gtrie re-initialization failure in platform depedent software which is reported via another error log before this log is seen.), (Recommended Action: Please collect the following info: <CmdBold>show platform<NoCmdBold> <CmdBold>show version<NoCmdBold> <CmdBold>admin show install active<NoCmdBold> <CmdBold>show logging<NoCmdBold> <CmdBold>show process fib_mgr location <node><NoCmdBold> <CmdBold>show tech cef<NoCmdBold> <CmdBold>dumpcore running process fib_mgr location <node><NoCmdBold> The 'node' is the location where this IOS message was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON_CLIENT-7-MSG_SEND
### Response:
(Severity: 7), (Category: HA), (Description: An attempt to send a message to the redcon server failed with the specified reason. It may be the case that redcon had been restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you remove a software package in Cisco IOS XR?
### Response:
A software package can be removed in Cisco IOS XR using the 'install remove' command, which deletes the specified package from the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_DEBUG_INIT
### Response:
(Severity: 3), (Category: IP), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTS0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different IS-IS authentication types?
### Response:
The IS-IS authentication types are:
- Clear-text password (per-interface or per-area)
- HMAC-MD5 authentication with key chain (per-interface or per-area)
- Hashed password in LSPs (validate or send-only)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-4-POWER_CFG_REJECTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The admin config <CmdBold>power budget profile extended rack <NoCmdBold> is rejected on this perticular rack due to insufficient power.), (Recommended Action: - Please collect the following CLI command to determine the current budget situation and to see if there are any failed power modules. <CmdBold>ADMIN SHOW ENVIRONMENT POWER-SUPPLY<NoCmdBold> - Install additional power supply modules and in case of presence of failed power module(s), replace those unit(s). - After the above step, retry the Config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-2-FABRIC_INTERNAL_ARB_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric encountered fatal internal arb fabric link fault and has reloaded linecard to recover from this fault.), (Recommended Action: Fabric encountered fatal internal arb fabric link fault and has reloaded linecard to recover from this fault.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DATABASE-6-INIT_RETRY_SUCCEEDED
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: An error was previously encountered while initializing one of the critical modules of the configuration manager server. However, the initialization was retried and succeeded.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-BCASTFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server failed to send a broadcast message to the client. This will result in the client being unaware of an event that occurred in the packet server.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-MEMORY_UNMAP_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Memory unmapping for the file failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-FGID_REG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FGID controller registration failed. Packet path initialization to RP errored.), (Recommended Action: Restart the spio_ma process. 'process restart spio_ma location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-4-INVALID_PARM_REDFS_QUERY
### Response:
(Severity: 4), (Category: MEDIA), (Description: Redundancy FS got an invalid parameter value when Redundancy FS was quering the media partition information from the device.), (Recommended Action: Report this message to TAC. Capture console log, 'show media', 'show media trace', show mirror statistics' and 'show mirror trace' for TAC and ddts.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-MEMORY_COLLISION_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: PRM has detected an NP memory collision error on NP %d. The linecard will be rebooted.), (Recommended Action: Fatal error. Reboot linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA_LTRACE-6-ERR_INFO_VERBOSE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the the platform ICPE EA LTRACE component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_SVR-2-SANITY_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EDRM server process encountered critical data sanity failure and initiated Line Card reload. A reason text is supplied to describe the error.), (Recommended Action: No manual recovery action required. Line Card will come up after reload is completed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PFI-3-SET_GLOBALS_FTRUNCATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to truncate the file. The returned err code should indicate the reason for the failure of the api. This is likely due to a transient condition on the system. The client calling this api could retry it or handle it accordingly. If the issue is seen persistently, initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-4-WARN_ERRNO
### Response:
(Severity: 4), (Category: SECURITY), (Description: Warning.), (Recommended Action: 'NO ACTION')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-7-DMAC_CTX
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Display the DMAC ctx information. %s- dmac ctx parameter. %x- dmac ctx parameter value.), (Recommended Action: debug info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-DLL_LOAD
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to load the given MIB, for the given reason. This could be due to a low memory condition.), (Recommended Action: Check the MIB dll is loaded or not using CLI 'show snmp mib dll | i xxxdll' Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR1_INTR_FIFO_ORUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR1_INTR_FIFO_ORUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMACTRLR-2-NOMEM
### Response:
(Severity: 2), (Category: L2), (Description: The process is out of memory.), (Recommended Action: Check process list for source of memory loss. Check if h/w memory requirements are met.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-6-INFO_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the Bundle Manager to indicate an operation like retry or recovery after retry due to previous error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-PFXLIMITTHR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Number of prefixes in the topology database has reached the configured or default threshold level.), (Recommended Action: Take preventive action by identifying the source of the prefixes. Use \'show eigrp accounting\' for details.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-FILEOPEN
### Response:
(Severity: 7), (Category: MGBL), (Description: The file specified for reading instructions from, or writing output to, when XML schema browser was started, cannot be found. The most probable reason is that an incorrect name or path was supplied.), (Recommended Action: Check that the file name sor path upplied was correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-INITSYNC_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: There was problem during init sync), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-EAINIT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that initialization of IP Tunnel's Execution Agent failed. Particular reason is included in the message. This error prevents IP Tunnel from functioning), (Recommended Action: Please try restarting ip_tunnel_ea process with the command <CmdBold>process restart ip_tunnel_ea location <node id><NoCmdBold>. If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFV3_POLICY-3-ORA_RUN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CAIBIST-3-ERR_HW_BIST_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: provide BIST failure info), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_NSR-3-SPR_BUFF_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Could not get buffer for NSR HFR header. %d- return value of the function. %d- Line no for the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-HIGH_3_3VCC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high in 3.3Vcc voltage. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-3-UNRECOVERABLE_BUS_HANG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: As shown in the message.), (Recommended Action: Physically OIR the RP board which is having the problem. If the error occurs even after physical OIR. Please collect required_info log/trace and contact Cisco technical support representative with required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-3-OWNERSHIP_QUEUE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The identified client attempted to access a packet that does not belong to it.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-READ_TEXT_DUMP_FAIL
### Response:
(Severity: 6), (Category: OS), (Description: Failed to read from the text dump file.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBC_RSRCMON-1-ALERT
### Response:
(Severity: 1), (Category: SERVICES), (Description: The system is in congested state. Red alarm has been raised. No new calls will be accepted), (Recommended Action: reduce the call rate)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-CLIENT_NOTIFY_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error was enountered when attempting to alert a packet- processing client of packets that have been delivered to it for processing. The system will retry to attempt to recover.), (Recommended Action: The system will attempt to recover by retrying. If the retries are successful then no further action is needed, or if unable to recover and the problem appears fatal then another message will be displayed. Alternatively, restarting the process with the Process ID specified in the message may resolve the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-4-OOR_YELLOW
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a severe error message in the DPA module to indicate high usage of DPA resources.), (Recommended Action: Please collect the DPA resource information (show controller npu resources all location <Rack/Slot/Module> all). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-EDM_DATALIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to create a SysDB data list.), (Recommended Action: Please include the output of the following commands: - show tech-support lpts - show tech-support sysdb - show logging - show running config)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-CLEANUP_REG_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: CGN_MA failed to register for cgn instance cleanup handler, the process will restart under this scenario.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-ETH_SERVER_ASYNC_WRITE_ERR
### Response:
(Severity: 3), (Category: OS), (Description: ethernet server asynchronous write operation has failed. It is used by client to asynchronously transmit packet using eth_server %x- Status), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_LIB-3-FETCH_UPDATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unexpected error fetching a RIB update notification. See error message for more information.), (Recommended Action: Restarting the client process from which the errow was emitted, or the RIB server, may fix the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_4_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-CONFIG_SCAN_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: LDP failed to read existing configuration during startup.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHANCON-6-RECV_REG_MSG
### Response:
(Severity: 6), (Category: OS), (Description: Connector poll returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power greater than or equal to the high Tx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you discard unsaved configuration changes in IOS XR?
### Response:
To discard unsaved configuration changes in IOS XR, you can use one of the following methods: (1) exit configuration mode using 'end' or 'exit' commands, (2) use the 'abort' command to discard changes and release the configuration lock, or (3) use the 'clear' command to reset the configuration session.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-BANDWIDTH_RATIO
### Response:
(Severity: 3), (Category: QOS), (Description: The bandwidth ratio is invalid at this level. The message will provide further details on the error.), (Recommended Action: Please adjust the bandwidth parameters in the policy map.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between OSPF inter-area and intra-area routes?
### Response:
Intra-area routes are routes within a single OSPF area. They are represented by type 1 and 2 LSAs. Inter-area routes are routes advertised between OSPF areas by ABRs using type 3 and 4 LSAs. Inter-area routes have a higher administrative distance than intra-area routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-3-CONFIG_MISSING_PARAMETER
### Response:
(Severity: 3), (Category: OS), (Description: Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.), (Recommended Action: Provide the following log: Collect Console logs and following Information -From the Shell promt of LC and RP, fetch the file /pkg/etc/inflow.conf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-2-ERR_CFGMGR_CONNECT
### Response:
(Severity: 2), (Category: L2), (Description: *RECUR* The requested operation couldn't be completed as connection to Config Manager was not proper.), (Recommended Action: No action required. If the problem persists across every config restore, collect the required info given below:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-RDBLEFT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Routes exist over an interface being deactivated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-IO_PERM_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver has been unable to gain the required permissions to access the UART.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IP_EA-3-ERR_INIT_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8111-3-INTR_MASKED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCIE interrupts masked due to large errors), (Recommended Action: If the issue persists please, contact your technical support representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-2-LINK_REACH_REQ_COUNT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-6-NSR_RESTART
### Response:
(Severity: 6), (Category: ROUTING), (Description: BGP has restarted NSR due to the reason shown. There is no impact on forwarding.), (Recommended Action: This message is for information purpose only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-HW_TFD_FULL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects OQ_FULL and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-QSM_ADD_SERVICE
### Response:
(Severity: 3), (Category: ROUTING), (Description: RIB failed to advertise it local channel during failed over.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-SYSTEM_MANAGER_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: System Manager failed to retrieve the job id which is caused due to an unexpected error.), (Recommended Action: If the message recurs, issue the command 'show tech-support sysmgr' to gather required data and contact the Cisco technical support representative with the gathered information and the exact error message as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-PACKAGE_LICENSE_INVALID
### Response:
(Severity: 4), (Category: LICENSE), (Description: The package exists without a valid license), (Recommended Action: Puchase the package license)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_CID_SESSION_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-OPERATION_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This may be a serious failure, however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Give CLI: If it is still getting operational failure, perform RSP switchover or card reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-LWM_REPLY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unexpected error sending reply to a RIB client.), (Recommended Action: Check for errors in the state of the routing table. If any problems are identified, restarting the client and/or RIB may help to fix the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-ERR_INTERNAL_SW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The sc_reddrv encountered the annunciated SW error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A SysDB free related error occurred.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an CFP temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-LOOPBACK_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The Ethernet Link OAM Damon has failed to initiate loopback mode. Loopback mode is unavailable until the issue is resolved.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-3-INTERNAL_NULL
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP ENA filesystem handler has passed itself a NULL pointer when it should not have done - this point in the code should not have been reached. The HTTP process may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-7-CPI_GET_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The card presence indication driver failed to return requested status to shelfmgr. The shelfmgr periodically audits the card presence driver in an attempt to recover from any such errors.), (Recommended Action: 1. If the errors stop printing due to subsequent shelfmgr audits, no action is required. 2. If the errors persist, then use these CLI commands: <CmdBold>process restart tempo location <active RSP location><NoCmdBold> <CmdBold>process restart shelfmgr location <active RSP location><NoCmdBold> 3. If the errors do not stop after restarting the above processes in sequence, please contact your Cisco techincal support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-6-READ_LICENSE_FILE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The license manager is about to open the named license backup file to show license backup to the user.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-NONRESPONSIVE_CLIENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: TE server is forcing the specified client to reconnect, as the client has not processed a notification after a substantial timeout period.), (Recommended Action: Collect 'show processes pidin location <loc-name>' to find out the unresponsive client. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-4-DISK_WARN
### Response:
(Severity: 4), (Category: INFRA), (Description: When some monitored disk's usage is above MINOR Threshold Percentage.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBQSMGR-1-PHASE_REGISTRATION_FAILED
### Response:
(Severity: 1), (Category: INSTALL), (Description: This process has failed to register for the QSU phase notifications which it requires for successful QSU behaviour.), (Recommended Action: The process is automatically restarted, which should trigger a QSU abort - the QSU may be attempted again at this point. If this process is involved in protocol operation, then there may have been packet loss as a result of this event which requires remedial action. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-PCIE_TXIF_FIFO_MBE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-IM_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Failed to create and control FINT), (Recommended Action: Restarting IM may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRIVER_LITE-6-ASIC_INITIALIZED
### Response:
(Severity: 6), (Category: FABRIC), (Description: This indicates Fabric ASICs are initialized and is expected during normal operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-MSG_TX_SKIPPED_NO_PEER
### Response:
(Severity: 5), (Category: ROUTING), (Description: An attempt to queue an LDP message for transmission to a peer failed.), (Recommended Action: This is an informational message. Failure to queue a msg for a peer should occur only when the LDP session with the peer no longer exists. The software should recover from this situation by discarding the LDP session and trying to establish a new one. If this message occurs repeatedly, copy it exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-2-OFFLOAD_PROC_INIT_ERR
### Response:
(Severity: 2), (Category: FABRIC), (Description: Failed to initialize the offload processor. Interfaces will not come up.), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-FAILOVER_DISABLED
### Response:
(Severity: 4), (Category: HA), (Description: Redcon has notified the card failover has been disabled by the configuration.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-6-RSVP_HELLO_STATE_UP
### Response:
(Severity: 6), (Category: ROUTING), (Description: A new hello session with a neighbour has been established), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR0_INTR_DC3_MIN_DROP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR0_INTR_DC3_MIN_DROP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR handle TTL processing for MPLS packets?
### Response:
Cisco IOS XR implements uniform mode TTL processing by default. In uniform mode, the TTL value is decremented by one at each MPLS hop, and if it reaches zero, the packet is discarded and an ICMP time exceeded message is sent back to the source. IOS XR also supports pipe mode TTL processing, where the TTL is not decremented at each MPLS hop, providing TTL hiding functionality.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-MEMUTILMAPFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Memory maping for the specified area failed and packet server will restart.), (Recommended Action: If the error is not rectified after two or more restarts, please call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INCOMPATIBLE_FC_FOR_LC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This FC type is not supported with A9K-12X100GE for the ASR9K family as it is not a supported combination. Shelf manager raises this alarm when it detects the presence of the incompatible FC.), (Recommended Action: Please remove this FC1 from the chassis and upgrade to FC2. After upgrading the FC, reload the chassis to allow the ASR9K-12X100GE LC to boot up. If you have questions, please contact your Cisco technical representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-PORT_FWD_INFO_GENERAL
### Response:
(Severity: 6), (Category: SECURITY), (Description: SSH port forwarding info.), (Recommended Action: 'NO ACTION')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-2-INIT_L2FIB
### Response:
(Severity: 2), (Category: L2), (Description: This error message is thrown when, resource monitor initialization failed to intialize the shared memory or when we fail to get l2fib timestamp. recommended_action: If this error is due to failure to get l2fib timestamp, restart l2fib process using: process restart l2fib_mgr If this error is due to Resource monitor failing to initialize the shared memory, it could be because of not having ample hardware resource memory. *REDUCE*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-BAG_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This failure encountered when registering or encoding or decoding of FM bags are failed.), (Recommended Action: Re-execute the show command for which the error was seen. If it continues restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-3-PORT_CONTROL_DISABLE_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Failed to disable port-control for the interface.), (Recommended Action: Check the platform logs for error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-BACKEND_EDM_GET_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: backend_edm_get() call failed.), (Recommended Action: Restarting the process should fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-3-ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Script-mgmt operation has an error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CPT4_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PHY controller driver detected a parity error.), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_SIGNALLING_STATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface has changed signalling state.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status \ signalling-state') and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different Inter-AS MPLS VPN implementation options?
### Response:
The main Inter-AS MPLS VPN implementation options are\n- Option 1: Back-to-back VRF (virtual routing and forwarding) connections at the AS boundary routers\n- Option 2: EBGP redistribution of labeled VPN-IPv4 routes between the AS boundary routers\n- Option 2a: EBGP redistribution of VPN-IPv4 routes with next-hop-self\n- Option 2b: EBGP redistribution of VPN-IPv4 routes with redistribute connected\n- Option 2c: EBGP redistribution of VPN-IPv4 routes between loopbacks\n- Option 3: Multi-hop EBGP redistribution of labeled VPN-IPv4 routes between route reflectors\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-MEMORY
### Response:
(Severity: 3), (Category: SECURITY), (Description: locald failed to allocate the required amount of memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-3-MODULE_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: An error was encountered in a module during process initialization.), (Recommended Action: The process will restart. If the problem persists, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-CLIENT_REGISTRATION_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver client registration has failed due to abov error condition.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-6-START_SYNC
### Response:
(Severity: 6), (Category: MGBL), (Description: Status information while starting config file sync.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-5-ZAPDISK_DONE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-OTDB_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to delete an objet tracking descriptor block from the otdb AVL tree.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ncs4k-3-PROVISION_INVALID_RACK_NUMBER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The provision was triggered on a invalid rack. This rack is not recognised innternally), (Recommended Action: Please check for the correct rack number 1. show vm on the sysadmin console a. thie sommand should let the user know all the valid rack numbers)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
METRO_STATS_API-7-ERR_DLL_INIT
### Response:
(Severity: 7), (Category: L2), (Description: This error indicates that there was an error while initializing the stats dll.), (Recommended Action: No action is required. The process is restarted automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_2_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_SPAN_EA-4-CFG_OVERRIDE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: monitor-session is already configured on the bundle member interface and configuring monitor-session on bundle-ether will override the old monitor-session config.), (Recommended Action: To avoid confusion, user should remove monitor-session config from bundle member interface which is no longer active.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-1-LOG_ALERT_OWNER_PLANE
### Response:
(Severity: 1), (Category: OS), (Description: An alert owner plane message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_OFLOW_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 0 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-4-ATTACH_RECONNECT_HANDLER
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Failed to attach a reconnect handler to ethernet server coid. If ethernet server restarts, heartbeat agent may not be able to receive/write messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
eth_gl-4-EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: The indicated process encountered an error while listening for events. The process will automatically restart and retry.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-GST_JUMP_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: GST jump error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-7-BUS_UNHANG_SUCCESS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: As shown in the message.), (Recommended Action: Please collect required_info log/trace and contact Cisco technical support representative with required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_11_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_INTF
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Error while doing IM or IDB stuff), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFD_HELPER-5-CONFIG_LOCK_NOTICE
### Response:
(Severity: 5), (Category: MGBL), (Description: The sysadmin configuration was locked or unlocked.), (Recommended Action: No futher action is necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCT_STOP_REC_FILE_OPEN_FAILED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when acct stop rec file open failed.), (Recommended Action: Check the harddisk space. Try disable and then enabling the accounting stop storage feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_AIS_DEMC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-4-BATCH_LOG_PATH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified error was encountered in the OSPF RIB batching code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-ERR_ASIC_GENERIC
### Response:
(Severity: 6), (Category: FABRIC), (Description: Ingressq encountered a device error that has exceeded its threshold value. Driver takes appropriate action to log and fix the error which may include a device reset.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-2-PCI_FATAL_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIe interface encountered fatal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-OID_SUBTREE_MISSING
### Response:
(Severity: 3), (Category: SNMP), (Description: One of the mibd process has failed to register its oid's with snmpd. Either due to failure in mibd init or issue in communication channel between snmpd and mibd. This would result in failure of snmpd get or next request on those oids.), (Recommended Action: It is possible that one of the mibd_* process has crashed or failed to initialize. Check show context for crashes. Collect show tech snmp, follow process of mibds and sysmgr debug logs)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PINGMIB-3-EVENT_BLOCK
### Response:
(Severity: 3), (Category: SNMP), (Description: A software error occured when the ping mib process try to Event block call), (Recommended Action: The process will attempt to recover from this situation by exit. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Retrying ping mib with time gap might help. If that does not work contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-BAD_STATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MSDP peer entered a new state which was not one of the valid states.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp peer<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp peer<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace peer<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace peer<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-3-MISSING_FUNCTION
### Response:
(Severity: 3), (Category: ROUTING), (Description: The library is incorrectly installed.), (Recommended Action: Check to make sure that there is no disparity in software installation across multiple nodes. Copy the output of 'show dll pid <PID>' where PID is the process id of policy_repository process. This problem may be transient. Restart policy_repository and check for re-occurence of the message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DATABASE-4-INIT_FAILURE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: An error was encountered while initializing one of the critical modules of the configuration manager server. Without proper initialization of this module, configuration manager can not operate properly. Initialization will be retried every 60 seconds if required.), (Recommended Action: Subscriber Database Manager is a critical component and must be operational in order to configure the router. Please note that if the probem is caused by a system resource shortage continued initilization of the module may repair the problem. If this error is seen more than 5 times, contact Cisco TAC support because a reboot of the node may be required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_INVALID_INSTANCE
### Response:
(Severity: 3), (Category: FABRIC), (Description: This indicates that an attempt to access internal information was made to an invalid device id.), (Recommended Action: None. software error handling will recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NPL_SEND_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred to send msg to the NPL queue - this triggers NSR resynchronization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-NETWORK_GONE_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The transport detects that the network protocol process is not running. The problem is usually transient and is recovered once the network process becomes available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-3-GET_VERSION_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The version of the FPD could not be obtained from the specified SPA. The FPD information will not be available for the specified SPA. System processing will continue normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMGR-6-OVA_COPY_DONE
### Response:
(Severity: 6), (Category: OS), (Description: OVA copy done), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-VIRTUAL_MEMORY_LIMIT_THRESHOLD_REACHED
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP has reached 90% of the virtual memory limit for the platform. If memory consumption continues to increase and reaches 100% of the allowed limit, BGP process will crash and dump core.), (Recommended Action: Please monitor the virtual memory usage of BGP, if the memory is stable no action is required. If BGP scale is going up, please ensure BGP stays within the virtual memory limit by taking corrective actions. If the virtual memory continues to increase BGP will crash on reaching the virtual memory limit. Please collect the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-TCAM_PERR_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Failed to correct a TCAM Parity error and further detection has been disabled by CPP driver.), (Recommended Action: *SH_CMD sh controllers pse qfp infrastructure tcam resource-manager error parity location <Fully qualified location specification>*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-MSG_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: The message received by the server had invalid values as indicated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx - show shmwin trace all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-CLIENT_STATS_MISMATCH
### Response:
(Severity: 7), (Category: SYSDB), (Description: The per-client usage statistics for the SysDB clients identified in the message have been combined, when they should be stored separately. The statistics for these processes should be treated as inaccurate. This is an unexpected condition, though has no effect on router operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-APPLICATION_REGIST_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Failed to execute application registration function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-0-HW_INIT_FAIL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: FPGA Hardware initialization failed.), (Recommended Action: The software is not able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_AIS_DEME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-2-EIO_TRAIN
### Response:
(Severity: 2), (Category: L2), (Description: EIO training errors. The EIO link to the PLASPA failed to train. This will result in traffic loss through this PLIM.), (Recommended Action: Check seating of both the PLIM and the MSC and then reload the MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_COMMS-3-SAVE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The client failed to save data to Checkpoint. If the process restarts before the save can be retried, then data loss could occur.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RVM_MGR-3-MEM_ALLOCATE_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error due to memory allocation failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-4-UIDB_SET_WARNING
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Feature Mgr failed to program the correct QoS related information in UIDB (interface data structure in hardware) when enabling/disabling QoS on the interface. The most likely cause of this message is deletion of a vlan sub-interface when there is a qos policy attached on the parent physical interface. In this case, the message is harmless and can be ignored. The reason this happens is because, the feature_mgr process tries to reset QoS related flags in the UIDB, but by that time the UIDB entry has already been deleted. It is possible, though very unlikely, for this message to appear in the following cases: 1) A QoS policy is attached on an interface. 2) QoS policy is removed from an interface. 3) Vlan-id is configured for a sub-interface and a QoS policy exists on the associated physical interface. 4) Vlan-id is un-configured on a sub-interface and a QoS policy exists on the associated physical interface. 5) When all members of a bundle go 'down'. In such cases, the warning message indicates that there could be a problem in enabling/disabling QoS on the interface.), (Recommended Action: For case 5 mentioned above, message can be ignored. For cases 1, 3 try removing and re-applying the QoS policy. 'no policy-map <policy-name>' For case 2, try applying the policy and removing it again. For case 4, delete the sub-interface itself and if needed re-create it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-LC_ACT2_I2C_READ
### Response:
(Severity: 0), (Category: PLATFORM), (Description: i2c failures during LC Authentication), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather the output of CLIs 'show diag <lc> eeprom-info', 'show tech-support ethernet interfaces'. Please ensure that the line card daughter board card type, board PID and serial number are not modified. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-4-LRD_CALL_STILL_TRYING
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install manager needs to call some APIs to retrieve information during its initialization. If the information is not retrieved successfully install director will retry after a small time interval until success.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-3-XBAR_DIS_FR_PEER
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Peer RSP has disabled fabric crossbars.), (Recommended Action: This (standby) RSP must be power cycled. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-CISCOSHMEM
### Response:
(Severity: 7), (Category: HA), (Description: Mapping to shared memory provided by cisco_wrapper failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-PD_INFRA_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the OFA FIB to indicate that an error was seen when trying to access PD infra resource.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-SVR_UNREG
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to unregister with WDSysMon server with a close message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_8P_GE-6-PORT_DEL_INFO
### Response:
(Severity: 6), (Category: L2), (Description: Port deletion happened after the threshold time.), (Recommended Action: This is an informational message.Upon seeing this message collect the trace log via 'show plim ether trace error location <>' 'show plim ether trace info location <>' 'show tech-support ethernet ' and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CRRS_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver version is not compatible with the hardware version.), (Recommended Action: Upgrade the Port controller FPGA image using the FPD procedure, followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-PAK_NETIO_MUTEX_UNLOCK_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Failed to release mutual lock.), (Recommended Action: Restarting netio may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APM-3-FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message notifies user when a slice configuration failed.), (Recommended Action: Collect console log and the following information and contact your technical support representative with the gathered information. - show platform - show tech-support apm)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_CARD_SESSION_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on the card has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-3-EBS_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt fpga detects egress module errors), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINK-4-BERTRESTART
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Restarting a running BERT is not allowed), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_STATE_MACHINE_THAWED
### Response:
(Severity: 6), (Category: INSTALL), (Description: When initiating the ISSU operation, the user specified that the install infrastructure should freeze the ISSU state machine in every state before transitioning to the next state. This message indicates that the user has indicated install infrastructure to proceed with the state transitioning. The user has indicated to unfreeze from the current ISSU state. This is a non-error condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is a composite bootable file in IOS XR?
### Response:
A composite bootable file in IOS XR is a .vm file that contains the operating system kernel, base image, admin plane features, and routing and forwarding bundles. Installation of the .vm composite image file results in the installation of a number of individual packages.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-PRIO_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Setting priority to thread API failed.' 'This will not effect the process.' 'This operation is optional'), (Recommended Action: 'ISSU manager will use some other API' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMP-3-MQ_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VEEA-4-BCMDPA_L1_PFC_UNSUPPORTED_PLAT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: BCMDPA L1 port PFC unsupported config failure.), (Recommended Action: Unsupported config, fix config.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_CORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory correctable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_PON_FLOW_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the SBUS Driver to indicate that the power flow operation has failed on the specified HBM memory. This indicates that data integrity cannot be guaranteed.), (Recommended Action: The line card needs to be returned for repair.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-OPTICS_I2C_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Optics i2c Failure/Success while accessing optics), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_ALARM-3-MAX_AC_PER_BRG_PER_NP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Exceeded maximum number of ACs on a bridge on a single NP.), (Recommended Action: Reduce number of ACs on a bridge on a single NP)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IP_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-IIH_IF_ADDRESS
### Response:
(Severity: 6), (Category: ROUTING), (Description: IS-IS received an IIH from the specified source containing an invalid and potentially unusable interface address for the specified address family. The message contains details of why the interface address is invalid. The message implies that the router sending the bad IIH is either misconfigured or is not conforming to the IS-IS specification. If the message describes the address as unusable, then IS-IS is not able to use the adjacency as a next hop for the specified address family. Otherwise IS-IS will still attempt to use the adjacency as a next hop.), (Recommended Action: Using the contents of the error message as a guide, check the configuration of the router sourcing the IIH or contact the router's vendor.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-5-DUP_HOST
### Response:
(Severity: 5), (Category: L2), (Description: The specified mac or ip address has been detected on two or more hosts. This can happen if a mac or ip address has moved to a different host and this condition will resolve itself. However, if the mac or ip address remains assigned to more than one hosts, then the address will be permanently frozen until it is unfrozen manually.), (Recommended Action: Make sure that the mac or ip address is not assigned to multiple hosts.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_2_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SYSDB_REG_VERIFY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Registration fail for sysdb verification), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_11_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FPD_UPGD_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured while upgrading FPD on the node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-VOLTAGE_SUPPLY_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: As soon as power is asserted on S2 cards, s/w will read voltage sensors on the host board. If for any reason reading voltages failed or voltage read are not within +-10% range, then this message will be displayed. It will also list which device and value read.), (Recommended Action: Please collect required_info log/traces and try to recover by reloading the S2 card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_CHKPT
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the Checkpoint Service. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-3-NODE_NAME_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: SysDB cannot get the node name from node id. Error code indicates the error received by SysDB.), (Recommended Action: Node name is useful for debugging purpose and does not impact the normal operation. This message can be ignored safely. However, if this repeats then please collect 'show tech gsp'. and inform Cisco support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-SIGNAL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The packet subsystem encountered an error while performing a signal operation.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_STATIC-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: ROUTING), (Description: Allocation of memory failed.), (Recommended Action: Add more memory.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-VSA_FORMAT_ERR4
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA format error in daemon user configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-EDMINIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization of the EDM thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-6-HBM_HYNIX_MEMORY_REPAIR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message in the SBUS Driver to indicate details about a HARD memory repair that has been performed on the specified HBM memory.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in stats infra component. The error string gives the reason for the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE5_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE5_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_9_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLCTRLR-2-NOMEM
### Response:
(Severity: 2), (Category: L2), (Description: The process is out of memory.), (Recommended Action: Check process list for source of memory loss. Check if h/w memory requirements are met. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIC_UDI-3-ACQUIRE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Can not retrieve licensing udi data from backplane or the udi string retrieved is invalid or mismatch.), (Recommended Action: Ensure backplane chassis serial number is correctly programmed. Issue 'show inventory chassis' in admin mode to verify backplane serial numbers, the valid Cisco serial numbers are made up of decimal digits and upper case letters following Base 36 numeral system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_DRV_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-DB_LOCK_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered while trying to perform an operation on a lock. The thread will continue without retrying the operation. In most cases, no further adverse behaviour should be observed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_CORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory correctable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-SLOT_DECODE_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: An error happened for a slot fields decoding.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath as-path multipath-relax' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath as-path multipath-relax' command allows load balancing over paths that have different AS paths. By default, BGP only installs multiple paths in the forwarding table if they have the same AS path. This command relaxes that requirement, allowing multipath load balancing over paths with different AS paths as long as they are equal cost paths.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_EDM-3-ENCODE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-3-ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabricq manager encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the fabricq_mgr driver is up and running by executing the following command at the CLI of the active RP: 'show process fabricq_mgr location <location>' If it is still non-operational, enable the following debugs of the fabricq_mgr driver process: error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events and restart the driver by executing the following command at the CLI of the active RP: 'process restart fabricq_mgr location <location>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNVGEN-3-API_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'An API failed due to the mentioned error'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFINDEX_PROVIDER-3-INTERFACE_PERSISTENCE_FILE_READ_ONLY
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to open interface index persistence file has failed while trying to wrile interface index changes into file.), (Recommended Action: Remove and re-configure the 'snmp-server ifindex persist' or do 'proces restart ifindex_server'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-FILEREAD
### Response:
(Severity: 7), (Category: MGBL), (Description: An error occurred during a read operation from the instruction file.), (Recommended Action: Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_BCM8705-7-INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message occured due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-RECURSIVE_LOOP
### Response:
(Severity: 3), (Category: ROUTING), (Description: A forwarding loop has been detected, where a prefix ends up recursing via itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
security_efivars-3-ACCESS_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: Failure occured in read/write of efi variable from secure storage.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_DEBUG_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug. The facility to debug the component may not work.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOL_DEMD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-6-OFA_INIT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the engine module in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-DATAPLANE_DELETE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: Failed to DELETE session dataplane from L2FIB. Resources may be leaked for this session.), (Recommended Action: You may either restart the vpdn_mgr process or the l2fib_mgr process on all nodes. You may also clear L2FIB tables. This may have significant service disruption. If the problem persists, contact technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_CMD-4-NULL_PTR
### Response:
(Severity: 4), (Category: INSTALL), (Description: Unexpected parameter value passed to function.), (Recommended Action: The system is working correctly, this only indicates that an invalid input is passed to the API. The Install infrastructure could have timed out waiting for user input. Please check if the operation is prompting for user input. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-7-SVC_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: A service API debug is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-3-REMOVE_CONFIG
### Response:
(Severity: 3), (Category: MGMT), (Description: This comes when removing all config during password recovery fails), (Recommended Action: This comes when removing all config during password recovery fails due to some error, please follow required infor)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-4-CERR_REGISTER
### Response:
(Severity: 4), (Category: SECURITY), (Description: acctd failed to register error codes.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-LOCAL_RESET_TIMEDOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node was expected to reboot locally but that did not happen. Hence it should be power-cycled by ShelfMgr to avoid any issue(s).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BMP-4-BASE_MAC
### Response:
(Severity: 4), (Category: L2), (Description: LRd returned a NULL MAC address to be used as the base MAC address for the system and bundle MAC addresses.), (Recommended Action: Check the VT topology definition file to ensure a Host MAC Address is specified. Check the LRd stub library and VT IO code to see if there is a bug in accessing the defined value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-6-ERR_1_PARAM
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-3-INTF_UP_DOWN
### Response:
(Severity: 3), (Category: L2), (Description: If keepalives are disabled and certain errors occur then the interface and line state can end up being out of step. Without keepalives enabled, SLARP has no way to recover by discovering the correct line state, so user intervention is required for a chance of recovery.), (Recommended Action: Please shut and no shut the problematic interface or enable keepalives on the interface to fix the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-QUEUE_STUCK
### Response:
(Severity: 3), (Category: L2), (Description: Egressq driver detects the queue stuck condition (CSCsj48554). There is no packet output from one or more of the PLIM links and the queue length for related queue(s) is building up.), (Recommended Action: By default, driver will perform the asic soft reset after detecting queue stuck condition. If this message appears more than once in short period, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-5-ERR_CONT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates an error occurred beyond which execution of the ClkCtrl_driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-IPV6_INTERNET_OPT_DISABLE
### Response:
(Severity: 2), (Category: FABRIC), (Description: The fia config (fia_cfg) has found pre-existing IPv6 custom lem config. IPv6 internet-optimized-disable is rejected as both configs cannot exist concurrently.), (Recommended Action: None If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRP_MAD-3-INVALID_MRPDU_INTERFACE
### Response:
(Severity: 3), (Category: L2), (Description: An MRPDU packet has been received but the interface the packet was received on is unknown. The specific MRPDU will be dropped and the protocol will continue to operate.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure LDP explicit null label advertisement?
### Response:
To configure LDP to advertise explicit null labels, use the 'explicit-null' command under the MPLS LDP configuration. RP/0/RSP0/CPU0:router(config)#mpls ldp
RP/0/RSP0/CPU0:router(config-ldp)#explicit-null
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACLEARN-3-CCI_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to intialize maclearn CCI infra.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-3-ERR_QAD_SET_WM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to set the watermark of the indicated qad queue. This should be because of some issues with the qad queue %s - high or low watermark %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_FILE_MD5
### Response:
(Severity: 3), (Category: SECURITY), (Description: The MD5 operation could not complete for the file specified in the error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-5-LOG_NOTICE
### Response:
(Severity: 5), (Category: INFRA), (Description: please see show kim log for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-SRV6_SIDMGR_BATCH_API_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The SIDMGR/RIB6 API failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_OPERATION_USER_ERROR
### Response:
(Severity: 3), (Category: INSTALL), (Description: Information provided by the user or by binaries referenced by the user command were inaccurrate.), (Recommended Action: Steps to correct the error are provided in 'show install log <install ID> detail'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-INTF_MODIFY_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: QMgr encountered an error during the re-programming of queueing resources within a queuing asic as part of interface modify operation.), (Recommended Action: Interface modify failed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-HW_INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the Platform LC Hardware in L2FIB BRIDGING component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_INVALID_PPS_SYNC_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The 1PPS signal has been invalidated possibly due to loss-of-signal condition.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Ensure valid 1PPS signal is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALLOCATOR-7-LOCKING
### Response:
(Severity: 7), (Category: OS), (Description: The allocator module has either failed to acquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-INT_SHM_ERR
### Response:
(Severity: 3), (Category: HA), (Description: An unexpected error happened while trying to open shared memory.), (Recommended Action: collect show lrd trace all location all contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_USAGE
### Response:
(Severity: 3), (Category: IP), (Description: Usage error.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-3-ERR_STR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-MUTEX
### Response:
(Severity: 3), (Category: L2), (Description: Thread synchronization failure has occurred. The text of the message displays the failed operation with error code.), (Recommended Action: This error is seen during thread synchronizing event. Check the state of process and thread on linecard. Try SPA/PLIM process restart by executing CLI 'process restart <process name> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-OVERFLOW
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Help string overflows ambig_line'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_RA_INTR_VQI_ENQ_QERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_RA_INTR_VQI_ENQ_QERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-DATA_NB_SERDES_3_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Data north bound serdes link 3 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_SYSMGR
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error whilst communicating with SysMgr. The error message describes what operation has failed and why it failed. This is a fatal error and the PPP MA process will abort and be restarted to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-CONFIG_CONFLICT_CLEAR
### Response:
(Severity: 4), (Category: L2), (Description: A configuration conflict has been cleared: Interface %s can be used by ' 'ICCP-SM feature.), (Recommended Action: Verify that ICCP-SM for the interface is working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR optimal option?
### Response:
The MPLS TE FRR optimal option allows the best available backup path to be used for FRR by considering the tunnel's constraints and attributes. It tries to find a backup path that is identical to the primary path with respect to bandwidth, affinities, priority, and so on.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-SYSDB
### Response:
(Severity: 4), (Category: LICENSE), (Description: An error occurred when accessing the system database. This a system level issue and possible issue from licmgr side could be invalid registration with sysdb.), (Recommended Action: please restart the licmgr process command 'admin process restart licmgr'. If the problem is still not resolved , please collect informaiton using the commands 'show tech-support license ','show license trace platform' and contact your tech support representative and provide them the collected information and exact message as displayed on screen.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR fast tunnel interface down detection feature?
### Response:
The MPLS TE FRR fast tunnel interface down detection feature provides a fast mechanism to detect the loss of the physical interface that is carrying TE backup tunnels. It uses hardware-based event detectors to quickly trigger FRR switching to an alternate backup tunnel or the release of protected resources. This minimizes traffic loss from failures of backup interfaces.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_BAD_HDR_LENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The packet header length (HDRLEN) is invalid for a(n) PDUTYPE, (should be EXPECTED) from SOURCE_IF This system received a PDUTYPE packet from SOURCE_IF claiming a header length of ACTUAL, rather than EXPECTED. The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_AHS_LOS_LANE2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-BADTIMER
### Response:
(Severity: 3), (Category: ROUTING), (Description: A timer was found with an unrecognized type), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospfv3 <process-name> - show ospfv3 <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_3
### Response:
(Severity: 3), (Category: IP), (Description: Tunnel encapsulation configured on the MAG does not match with that on the LMA.), (Recommended Action: Note the CoA address and IMSI (if available) from the error message. Run the following commands on the MAG that corresponds to the above CoA address or IMSI. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config | section mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config | section mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ipv6 mobile pmipv6 mag globals<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ipv6 mobile pmipv6 mag globals<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the tunnel encapsulation type for this LMA from the output of the above commands. Run the following commands on the LMA. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config ipv6 mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config ipv6 mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ipv6 mobile pmipv6 lma globals<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ipv6 mobile pmipv6 lma globals<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the tunnel encapsulation type for the above peering MAG from the output of above commands. If the tunnel encapsulation is not the same, reconfigure it on the MAG and/or LMA. If the issue persists, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-ERR_BUF_NEVER_FITS
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered while checking whetehr RIB buffer can hold a route.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_DELETE
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the item does not exist. The details are in the error string.), (Recommended Action: Check that the item to delete exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-SOCKBUF_PACKET_UNRESERVE_EXTENDED_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: socket library has encountered an error during unreserve extended packet buffer for scaled sockets.), (Recommended Action: The information in required_info to be collected and engineering team to be notified. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-FAB_MCAST_SC1_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A problem is detected by loopback test to the second Crossbar chip (chip#1) on this RSP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAP_LISTEN-3-SOCKET_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A socket operation failed while adding into the group membership or dropping the group membership.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes sap_listen error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes sap_listen error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sap trace detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sap trace detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_SVR-3-MUTEX_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to create the mutex.), (Recommended Action: Restart the process to recover from the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-NODE_NOSHUTDOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the shutdown request caused by a critical alarm or heartbeat loss will not take effect because the node is being put in NMON state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLRMGR-5-GO_MLR_ROOT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This logical router(LR) is going to be root role, this can happen when an LR initially boots up, it can take the root role if no other root LR is present. Also when current root goes down either due to root failure or reloading the root LR could cause the backup root change the state to root. This message displayed when an LR is going root.), (Recommended Action: This is an informational message only)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-6-FALLBACK_PSK_MKPDU_ICV_SUCCESS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-WDG_BARRIER_STALL_CLEARED
### Response:
(Severity: 6), (Category: FABRIC), (Description: Ingressq, Barrier stall cleared on one of the casts), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IM_CAPS_ADD
### Response:
(Severity: 3), (Category: L2), (Description: CDP could not install the CDP capsulation on the specified interface and hence it is not possible for CDP to send or receive any packets on this interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX-2-INIT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There was an error during the PEX driver intialization phase of trace buffer/event manager creation/asic error lib dll/ fault manager/platform DLL/interrupt service routine/ system manager ready state. The error message has detailed information. Process initialization error will usually result in process restart in an attempt to bring up the process again.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-LBUS_PARITY_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Local Bus PARITY error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-4-PM_FAULT_SIMULATION_WARN
### Response:
(Severity: 4), (Category: LIBRARY), (Description: The power module fault simulation requested is not supported.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_4_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-5-ACE_SYSLOG_NOTICE
### Response:
(Severity: 5), (Category: SECURITY), (Description: ACE SPA SYSLOG message), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-6-DEBUG_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB LOCSW component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_LIB-6-INFO
### Response:
(Severity: 6), (Category: OS), (Description: The specified condition has occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-RPC_DB_ERROR
### Response:
(Severity: 2), (Category: ROUTING), (Description: RPC db has mixed type of rpc element type, this may be due to memory corruption or due to some other bug.), (Recommended Action: Unconfigure label mode per-nexthop-received-label)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Ethernet OAM (Operations, Administration, and Maintenance) protocol in monitoring Ethernet networks?
### Response:
Ethernet OAM (Operations, Administration, and Maintenance) is a protocol that provides mechanisms for monitoring and troubleshooting Ethernet networks. It includes features such as link monitoring, remote failure indication, and remote loopback.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_PKT_LEN_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error FIA 00 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-4-ISOLATE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Ethernet server received an ioslate message to disable all EOBC traffic.), (Recommended Action: 'None, all EOBC traffic on this card is halted')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-VMM_CREATE_FAILURE
### Response:
(Severity: 4), (Category: INSTALL), (Description: A Sysadmin service used to define and/or start VMs during an ISSU operation failed after multiple retries. The ISSU operation cannot continue and will be aborted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-LSD_CONN_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: LDP encountered a problem while trying to connect with LSD server.), (Recommended Action: Make sure that LSD is running and LDP is connected to it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-3-FAILED_SYNC
### Response:
(Severity: 3), (Category: INSTALL), (Description: While trying to synchronize the install state files of the dSC instdir, an error occurred. The synchronization with remote nodes is attempted once the dSC has been successfully assigned and is required to either: a) update the new dSC with newer files found on remote nodes, b) update remote nodes with state files on the dSC. Should an error occur during either of these, the synchronization should be re-attempted.), (Recommended Action: Sync will be re-attempted automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the instdir process in IOS XR installation?
### Response:
The instdir process in IOS XR is the Install Director. It is responsible for driving the overall install operation. It performs version compatibility checks to ensure that the package or SMU being added is compatible with the running software version.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-PROGRESS_BAR
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process bar failed to creation/deletion), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_RULES-4-DEBUG_INIT_ERR
### Response:
(Severity: 4), (Category: L2), (Description: Internal error. SPA rules library debug library initilization failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-NOT_PIE_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: A PIE file is of the correct format, either because the wrong file has been specified, or the file is corrupt. The current request or operation will not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGEDM-3-REGISTER
### Response:
(Severity: 3), (Category: MGBL), (Description: Config library is failing to initialise the edm.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_AGENT-1-RESOURCE_LIMIT_REACHED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: System returns error if the number of sessions goes beyond the permissible limit per NPU.), (Recommended Action: Limit the number of sessions to the recommended number.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_SYSDB_DISCONNECT
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to disconnect from SysDB. The error will not affect IS-IS operation but does indicate that a programming error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-MSG_GET_CONN_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVEDGE_DATA-3-ERROR_DISABLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This can be a transient condition or an error.), (Recommended Action: This may be a transient condition. If this condition persists, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The cli to collect more information are as below. Collect 1 and 2 from all rsps and all IRL LCs, 3 from all IRL LCs 1. show nv edge data trace all error location [rsp & IRL LC] 2. show nv edge data trace all event location [rsp & IRL LC] 3. admin# show udld trace all location [IRL LCs])
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_MRIB_CONN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL_ENS-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Chassis Control driver process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_VERIFY
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. This could be because the item does not exist or has the wrong type. Or because the verifier did not allow the change. The details are in the error string.), (Recommended Action: Check that the item to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel path-selection metric feature?
### Response:
The MPLS TE tunnel path-selection metric feature allows the configuration of the metric type to be used for CSPF path calculation for a given tunnel. The default is to use the TE metric which is carried in TE LSAs. Alternatively, the IGP metric can be used which is the normal OSPF or IS-IS metric. This allows path optimization per individual tunnel.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-6-BINDING_CREATE
### Response:
(Severity: 6), (Category: IP), (Description: A new bidning has been created.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-NOTREDIST3
### Response:
(Severity: 6), (Category: ROUTING), (Description: For information only. Another router with a greater router ID is advertising the same external LSA. This router will stop originating the LSA to eliminate the redundancy.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_CHKPT_CORRUPT
### Response:
(Severity: 4), (Category: L2), (Description: Whilst restoring one of its checkpoint tables PPP MA found a corrupt checkpoint entry. The entry will be ignored and so the relevant interface's PPP session will be renegotiated after the restart and as a result there may be a short period where traffic is lost.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-FSM_CONNECT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: VPDN application failed to connect to procotol socket. This may be due to low memory conditions or an invalid argument.), (Recommended Action: Allow the subscriber to reconnect. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the commit operation in IOS XR?
### Response:
The commit operation in IOS XR applies the configuration changes built in the temporary area to the running system. It triggers relevant processes to apply the new configuration and make it active.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-6-INCONSISTENCY
### Response:
(Severity: 6), (Category: QOS), (Description: An inconsistency is a state in which QoS policy may not work properly due to the bandwidth change on an interface.), (Recommended Action: Remove and Reapply the policy-map)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-LOCK_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an internal software error. Please check the description for detail of error. PLA is failed get lock or unlock for internal resource. %s - description of the error. %s - failure reason.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-6-GSP_NODE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Node ID failed. %s- Function name. %d- Node ID. %d- Return Value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-4-ERRRATE_EXCEED_GLACIAL
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the PSE Driver to indicate that a high rate of specified errors is being detected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP autoconfiguration feature?
### Response:
The MPLS LDP autoconfiguration feature allows MPLS LDP to be enabled on interfaces automatically based on the presence of an IGP (OSPF or IS-IS). This simplifies configuration compared to enabling it explicitly on each interface. It is enabled with the mpls ldp autoconfig command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1_LNM-2-REMFAILEDPUBLISH
### Response:
(Severity: 2), (Category: L2), (Description: Noise state on the link has changed for the controller identified in the message. An error occurred while attempting to report an 'crossed' threshold value or 'fallen below' threshold value. Due to this failure, any applications such as MLPPP registered for notification of these events were not notified. If the error type is 'crossed', then Voice quality may be affected.), (Recommended Action: The controller identified in the message requires administrative attention. If the reported noise was of type 'crossed', the administrator may want to remove/replace the link. If the reported noise was of type 'fallen below', the administrator may want to put this controller back into service. Also, the administrator should copy the error message exactly as it appears and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-USERNAME_CONFIGURED
### Response:
(Severity: 6), (Category: INFRA), (Description: Username configuration detected. ZTP will cleanup and exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-TSP_GST_TIMER_JUMP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSP GST timer jump.), (Recommended Action: Minor error, no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-3-ENCRYPTION_FEATURE_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: A failure was seen during boot while setting up encrypted logical volume. The node will reload to try to recover in case this is a transient error. If the encryped LV cannot be properly setup, the node will continue to reload and shelfmgr will move it to shutdown state after five reloads.), (Recommended Action: Node should recover from transient errors in a single reload. Otherwise, node can be recovered by internal pxe reimage using the command: 'reload bootmedia network location'. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-UNKNOWN_BOOT_PROTOID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has received an unknown boot protocol with a boot request.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IPCPIW_SCAN_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error when scanning for IPCPIW configuration. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SysDB service, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACSTATMIB-4-MIB_INIT
### Response:
(Severity: 4), (Category: SNMP), (Description: The MAC accounting MIB was unable to initialize successfully. It is likely that an SNMP query that was in progress will not have been completed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL_MA_LTRACE-7-INIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-NON_SERVICES_PLIM_MISPLACED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Non-Services PLIMs in the upper slot (s = 0..7) may only be powered on if there is no Services PLIMs powered on in the paired lower slot (s+8).), (Recommended Action: Place the NON-Services PLIM in a lower slot 8 - 16, or in the upper slot (s = 0..7) where there is no Services PLIM in the lower slot (s+8).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-6-LTRACE_INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message that trace buffer is already set), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SIGSEGV
### Response:
(Severity: 4), (Category: OS), (Description: Signal info), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_CHAR_ALIGN_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 char alignment error on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_ST4
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ST4. Traceable condition occurs when the synchronization message quality level is lowered to ST4. The message quality is not used because it is below ST3.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-0-GENERIC_FAIL_RECOVER
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A place holder for card reload in case of failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-4-CACHE_GENERATION_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: Errors were encountered on some of the nodes in the system when attempting to generate the run time fingerprint cache. Generation will be rescheduled after a 5 minute timer. The results of any successful nodes will be written to the run time fingerprint cache. Outside a transaction, if generation failed on all nodes, previously available fingerprint data will still be available in the active and committed packages data, but it will be out of date as indicated by the fingerprint generation timestamp. If some nodes succeeded, up to date fingerprint information will only be available for the successful nodes, and no fingerprint information will be available for the failed nodes. Fingerprint information will not change for committed packages during a transaction, or for active packages during an atomic change, so the per-package fingerprint information will not change in these cases, despite regeneration failures.), (Recommended Action: Please obtain the output from the console or system log, and the entire output of the following commands: <CmdBold>show tech-support install<noCmdBold> Wait for the fingerprint cache status to indicate the cache is up to date in order to obtain the latest fingerprint information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-MUTEX_ISSUE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Failed to lock the mutex), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-5-SRLG_OVERFLOW
### Response:
(Severity: 5), (Category: L2), (Description: Maximum 100 SRLGs can be configured per DWDM port at the CRS. If some application like CTC has more than this number to configure, it indicates this situation by configuring the 101st value with a positive integer. The above ios_msg gets logged in this scenario.), (Recommended Action: It is just a notification.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-STAT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to stat() failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-SRV6_HW_PROFILE_MISMATCH
### Response:
(Severity: 4), (Category: FABRIC), (Description: 1. Mismatch found between the current srv6 profile and the newly configured srv6 profile. Needs attention with RSP reload.), (Recommended Action: System is inconsistent. Need to reload the RSP in order to activate the new SRv6 profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IFINDEX_GET
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to get a numeric interface index value for the specified interface.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-EDM_LIST_ADD_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE_MAIN-3-DLL_OPEN_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'Process failed in opening dll.' 'ISSU operation will continue without any error.'), (Recommended Action: 'ISSU manager will retry opening dll after sometime.' 'If the issue persists ,contact tac.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-NORTRID
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPFv3 failed while attempting to allocate a router ID.), (Recommended Action: Use the 'router-id' command to specify a unique Router ID for this OSPFv3 process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-SYSMGR_GET_NODE_STATE
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server failed to get node state from sysmgr.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-ALWAYS_ENABLE_TEST
### Response:
(Severity: 4), (Category: DIAG), (Description: The specified health monitoring test must be run and cannot be disabled.), (Recommended Action: Nothing. The specific health monitoring test cannot be disabled by design. The system is working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-TUPLE_UNLOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC6
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-5-INVALID_JP
### Response:
(Severity: 5), (Category: ROUTING), (Description: PIM invalid J/P notification.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-DEVICE_UNAVAILABLE
### Response:
(Severity: 7), (Category: OS), (Description: A device specified from a driver is not accessible.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-SYSDB_CONN_TO_COID_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: An internal error was detected when trying to convert a SysDB connection ID to a file descriptor.), (Recommended Action: Please provide the output of the following commands: - show tech-support lpts - show tech-support sysdb - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSU-3-INVALID_IDPROM_CONTENT
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The power module IDRPOM is not properly programmed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-LWM
### Response:
(Severity: 3), (Category: MGBL), (Description: The LWM api call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: L2), (Description: ASIC Error library encountered an error during the specified SYSDB operation.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-CTP2_TEMP_OOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Temperature is out of range. Needs to cool down.), (Recommended Action: Turn off the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-MPLS_INVALID_GID
### Response:
(Severity: 2), (Category: ROUTING), (Description: Label programming failure due to invalid GID), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-GET_MAPINFO_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Dumper collects all the process related data by using system call devctl. If a devctl fails, then the core file will be incomplete. This will not impact the system.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-0-SCRATCH_TEST_FPGA_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This is to indicate that FPGA access has failed on the linecard. This is thrown after consistent read or write failures to FPGA.), (Recommended Action: Reload the LC for atleast three times. If the problem persists, contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPI-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered while the ethernet packet infrastructure (EPI) library was initializing debug. The error message contains details about the source of the error.), (Recommended Action: The process using the library should deal with this error by exiting and restarting in an attempt to resolve the error condition. If the process does not automatically restart, a manual process restart may solve the problem. In both automatic and manual restart scenarios, the details of the error string may help suggest possible workarounds or recovery methods. For example, a temporary 'resource not available' condition may suggest other system wide memory issues to be investigated. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA-4-ERR_ACTIVATE
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the activation of the process. Activation occurs when the card transitions to ACTIVE state. This error resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the module in the platform L2FIB (D)RP component.This will not affect the forwarding component as it is in DRP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_VLAN_SES_THRESHOLD_NO_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular VLAN on the given access interface is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-6-DEVICE_PARTITION_NOT_EXIST
### Response:
(Severity: 6), (Category: MEDIA), (Description: The harddisk partition name by provided by platform does not exist.), (Recommended Action: Format hard disk to create valid partition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-1-PACIFIC_ERROR
### Response:
(Severity: 1), (Category: FABRIC), (Description: NPU Pacific A0 version asic has hit Errata and other issues due to presence of mix of A0 & B0 version Pacific Asics in the system.), (Recommended Action: System is inconsistent. It is recommended to have same version of Pacific asics for LC & FC in the system. Also system has to be reloaded to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB_IFSPECIFIC_CLIENT-3-ERR_OPER_INTF
### Response:
(Severity: 3), (Category: SNMP), (Description: The operation requested could not be performed due to an internal error.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9KPAGENT-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The pagent process exited due to the reason mentioned in the message.), (Recommended Action: To bring up the process , reload the LC or reinstall the pagent pie.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-3-PRIVMEM_SIZE
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-1-PCIE_RESP_FIFO_SBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-EA_IIR_ATTACH_FAILURE
### Response:
(Severity: 3), (Category: QOS), (Description: A member was added to the bundle or it was added earlier and link came up now. This triggers update event and an error is encountered in QoS EA process while handling update event for the bundle member.), (Recommended Action: If its scaled config exhausting h/w resources, try reducing number of targets for QoS policies.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-INVALID_10M_CLOCK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The 10MHz UTC clock signal has been invalidated possibly due to loss-of-signal condition, offset out of range or phase lock issue.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Ensure valid 10MHz clock is applied at input port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-LFA_FRR_INVALID_BKUP
### Response:
(Severity: 4), (Category: PLATFORM), (Description: FRR will not work as Bkup tunnel's underlying interface is same as the protected interface.), (Recommended Action: Make sure that the bkup tunnel would not take the same path as the protected interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G709-6-PP_SM_TRIGGER
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message from proactive state machine to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB-3-no_rackid
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to get rackid.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng fast-reroute' command in IOS XR?
### Response:
The 'mpls traffic-eng fast-reroute' command is used to enable MPLS TE Fast Reroute (FRR) protection for TE tunnels. FRR provides rapid traffic recovery in case of link or node failures by locally repairing the LSPs at the point of failure. This minimizes traffic loss during reconvergence of the TE tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_SVR-3-MUTEX_LOCK_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to create the mutex.), (Recommended Action: Restart the process to recover from the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA-6-CERR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform ICPE_EA component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_NETIO-3-INIT_DEBUG
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of debug for the NetIO caps. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-5-MAINTENANCE_DISABLED
### Response:
(Severity: 5), (Category: L2), (Description: When optical layer maintenance for an interface is disabled by the administrator, an hourly syslog notification is logged regarding this, until maintenance is enabled back again. One should not put the port into OOS-MT state when maintenance is disabled, otherwise it will lead to a forced maintenance activity and there might be loss of traffic.), (Recommended Action: Do not change the transport admin state of the port to maintenance unless absolutely required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_TOPAZ-3-SHM_MEM_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: hpi Shared memory allocation failed. %s- Function name. %s- Type of the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
8000-6-RESTART_NOT_SUPPORTED_SUPPLEMENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an error message associated with RESTART_NOT_SUPPORTED See RESTART_NOT_SUPPORTED for explanation), (Recommended Action: See RESTART_NOT_SUPPORTED for explanation)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_EXEC
### Response:
(Severity: 3), (Category: MGBL), (Description: mirror fork-exec ran into a problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-REGISTERS_INFO
### Response:
(Severity: 6), (Category: OS), (Description: This is the register contents at the time of the crash for the crashed process.), (Recommended Action: Informational message.No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT-3-ALM_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The monitored flow has traffic issues as indicated by the react trigger. The problem is introduced either at some upstream router or even at the traffic source itself. Alternatively, a configuration mismatch between the traffic source and this router (for the flow data rates etc) can cause this error.), (Recommended Action: Check to see if traffic source is indeed sending traffic. Check that the traffic characteristics defined at the source match that on the monitoring router. Trace the traffic flow upstream to the source and verify flow-mon statistics at each applicable hop. Check for packet drops for the flow at intermediate hops - between source and the monitoring router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDT-6-SUB_TRIGGER
### Response:
(Severity: 6), (Category: MGBL), (Description: Collection triggered for a subscription. Not an error, just info message.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-HW_RX_RFD_EMPTY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects RX_RFD_EMPTY and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-2-CONNECT_IM
### Response:
(Severity: 2), (Category: L2), (Description: This error indicates a problem with InARP/IM (interface manager) interaction. The Frame-relay's Inverse Address Resolution Protocol will not be functioning.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-3-PACKET_TOO_LARGE
### Response:
(Severity: 3), (Category: OS), (Description: MB-XR packet is too large.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-PLIM_NOT_READY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PLIM is not ready.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-OBFL_FLASH_ACCESS_SUCCESS
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: OBFL flash access success, flash back to normal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB_CLIENT-3-EXTRA_UNLOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: Consumer processes make use of adjacencies in the AIB database, and lock the adjacency while they do so. The identified consumer made an invalid attempt to unlock an adjacency. There may be no immediate impact on traffic, but this issue should be addressed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-6-LTRACE_BUF_INIT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A fault occurred while registering the mentioned ltrace buffer. This means that system logging capabilities for the pldmgr library component will be inoperable.), (Recommended Action: Please check the logs for the ltrace service for more insight into the failure. Restart the process for the reintialization of ltrace service.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-6-LATENCY_BELOW_THRESHOLD
### Response:
(Severity: 6), (Category: ROUTING), (Description: The average time taken for path creates to be processed by the system was above a defined threshold, but a path out message has come in below the threshold signifying that the problem has passed.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-1-IPACCESSNOMEM
### Response:
(Severity: 1), (Category: ACL), (Description: There is insufficient memory available to load the specified dll. This could be because of the shortage of system memory given the complexity of the configuration.), (Recommended Action: Please try simplifying the configuration for this equipment. If problem persists even with simplified configuration, contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPI-3-DETECTED_TX_PDMA_STALL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CPUCTRL TX PDMA ring remained full over non-transient period. Packets which could not be sent were discarded. The downstream ASIC may be stalled. Asic error logged with queue details.), (Recommended Action: Check ASIC error output for NPU. Check fabric status and connectivity for the node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHNLZD_EFCM-3-ERROR_EINVAL_SET_CALENDAR_ENTRY
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred in the Extended Flow Control Manager. This is caused by an out of bounds Flow Control channel number or bay number trying to be used during the configuration of Flow Control for the SPA.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-0-SVC_EMERG
### Response:
(Severity: 0), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-HIGH_2_5VCC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high in 2.5Vcc voltage. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
c2c_aif-3-ERR_HW_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hardware initialization failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_STUCK_BARRIER_FLOW
### Response:
(Severity: 3), (Category: FABRIC), (Description: Barrier flow of certain type is stuck at identified phase on the specified ASIC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FORGE_CGN_HA_AGENT-5-VM_DEACTIVATED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: VM deactivate and activate is not supported without VSM line card reload.), (Recommended Action: VSM line card reload is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_SSL-3-ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSL Generic error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_EVM_TIMER_LEAF_NEW
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-7-ERR_SYSDB_BIND
### Response:
(Severity: 7), (Category: IP), (Description: IP ARM process encountered failure in binding to SysDB. It will recover itself by restarting. Typically this error is caused if sysdb is unavailable for an extended period.), (Recommended Action: If the problem persists get the output of show processes, show sysdb trace, show sysdb trace clientlib job <jid of ip[v4/v6]_arm>, show arm [ipv4/ipv6] trace from the location the error message comes from.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An updation error has occured in the hardware abstraction layer of the Forwarding information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-5-COST_FALLBACK
### Response:
(Severity: 5), (Category: ROUTING), (Description: Cost-fallback activated or deactivated on interface.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBSOC-6-SEMA_INFO
### Response:
(Severity: 6), (Category: OS), (Description: Print semaphore info.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-EVENT_BOOLEAN_SET
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unexpected error during event boolean set. This may result in unreleased memory resources in RIB server.), (Recommended Action: If there is evidence of a memory leak in the RIB server, restarting it should help alleviate the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-CDR_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Driver failed to initialize one of the maxim CDR hardware modules instance.This happens when the write to a CDR register fails.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-6-FAULT_INTERRUPTS_RCVD
### Response:
(Severity: 6), (Category: MGBL), (Description: The ST16550 UART driver received too many interrupts within 3 second), (Recommended Action: Too many interrupts received by serial driver. Console cable may be faulty, replace and try again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-3-ENTRY_NOT_EXIST_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Attempt to delete NP entry that does not exist.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support l2vpn<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support l2vpn<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_BDI_DEME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-2-OOR_ROUTES_GREEN
### Response:
(Severity: 2), (Category: ROUTING), (Description: MFIB has unblocked the multicast route update to hardware. The node had detected the number of multicast routes exceeded the prescribed limits and route update to hardwared had been blocked. The situation has been cleared, hence mulitcast route update has been unblocked.), (Recommended Action: Make sure the number of multicast routes not exceed the prescribed limits.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_5_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-1-BOTH_FC_REMOVED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Two possibilities to this message 1) An alarm has occured. Software has detected that both fan controller cards have been removed from the chassis but, but gives user 45 seconds to insert atleast one of them back into the chassis. If no action is taken within 45 seconds, the chassis will be shut down. 2) A previously occured alarm has been cleared. Software has detected that both fan controller cards were removed which would have shut down the system. But one fan controller was put back within 45 seconds, thus removing the need to shut down the system.), (Recommended Action: Two possibilities to this message. 1) An alarm has occured : Insert a fan controller card within 45 seconds. 2) A previously occured alarm has been cleared : *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-3-MQ_SEND
### Response:
(Severity: 3), (Category: HA), (Description: Process hit a messege queue error.), (Recommended Action: Restart the process. If error persists, contact TAC with 'show cdm trace jid all' logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESSION_MON-4-GEN_WARNING
### Response:
(Severity: 4), (Category: SNMP), (Description: iedgemon encountered error and cerr code is returned), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-RETRY_EXCEEDED
### Response:
(Severity: 3), (Category: L2), (Description: The CFM MA attempted the maximum number of retrys for a failed operation. The operation will not be retried again. The MA will attempt to recover, but it is possible that the Maintenance Points created will not match those specified in configuration. The problem could be caused by a system resource issue.), (Recommended Action: Attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_MQ_FULL_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 1 MQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_INCOMPLETE
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HSRPMIB-3-ERR_CONN
### Response:
(Severity: 3), (Category: SNMP), (Description: The HSRP MIB was unable to create a SysDB connection to the HSRP process for the purpose of retrieving management information.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the main components of the Cisco IOS XR microkernel architecture?
### Response:
The main components of the Cisco IOS XR microkernel architecture are\n- Microkernel: Provides minimal OS services like scheduling, memory management, and IPC\n- OS processes: Includes process manager, IPC services, and device drivers\n- Restartable processes: Includes routing protocols, management, forwarding processes\n- IPC message passing bus: Enables communication between microkernel and processes\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-ERR_SYSDB_APPLY_BATCH
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred whilst checking for more configuration batches after receiving request to shutdown the process. This may be due to resource starvation or an internal programming error.), (Recommended Action: Restart of EIGRP might solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RASF-2-NO_SETTER
### Response:
(Severity: 2), (Category: ROUTING), (Description: This is a logic error in the construction of one of the ORA entities. The function to actually perform the setter operation was not defined.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-6-SIA_IN_COMPLIANCE
### Response:
(Severity: 6), (Category: LICENSE), (Description: Device has transitioned from SIA Out Of Compliance to SIA in Compliance.), (Recommended Action: No action needed. This is just an informative message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ATM_OAM-3-PACKET_RX
### Response:
(Severity: 3), (Category: L2), (Description: There was a software failure while processing received OAM cell), (Recommended Action: No action required if the message is displayed just a few times and stops after that. If the message repeats continously, collect the System Messages displayed on the console and provide them to cisco support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ncs4k-1-CRASH_NOT_SUPPORTED_SUPPL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message associated with CRASH_NOT_SUPPORTED See CRASH_NOT_SUPPORTED for explanation), (Recommended Action: See CRASH_NOT_SUPPORTED for explanation)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-ASYNC_PULSE_FAILURE
### Response:
(Severity: 3), (Category: IP), (Description: The socket library couldn't deliver a pulse as part of its processing. This can place the process in an inconsistent state. The problem manifests, typically, during low memory conditions, so it is important to check for any widespread issues in either the system or the process state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-NO_RULE_INDEX_FREE
### Response:
(Severity: 3), (Category: INFRA), (Description: There is no unique rule index for this pcl rule.), (Recommended Action: Check for free rules between different ranges.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to commit changes after a software activation in Cisco IOS XR?
### Response:
After activating a software package, commit the changes to make them permanent using the 'install commit' command. RP/0/RSP0/CPU0:router#install commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp igp sync holddown' command in IOS XR?
### Response:
The 'mpls ldp igp sync holddown' command is used to configure a holddown time for LDP-IGP synchronization. This holddown is the amount of time IGP waits after receiving notification from LDP that LDP is fully operational on an interface before IGP starts using the link for forwarding. This holddown allows additional time for label exchange to complete and for LDP to converge.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-3-ERR_ATTR_DECODE
### Response:
(Severity: 3), (Category: L2), (Description: Updates to bundle membership parameters have been ignored because the received data could not be decoded.), (Recommended Action: The operation will be retried automatically and thus no action should be required. If the problem persists the ERR_OP_RETRY_THRESHOLD message will be seen within 30 minutes. If this occurs, restarting the Bundle Manager Distrib process on the dSDRSC (process restart bundlemgr_distrib) may resolve the issue. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-5-PER_PREFIX
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route accounting for a route), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-3-ORA_DOCK_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The policy_repository process, while trying to dock with the client ORA encountered an error that is specified in the error message.), (Recommended Action: Restart the policy_repository and/or client. Check if all the install operations are completed successfully If the message appears again, copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-SYSDB_REG_VERIFY_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Registration fail for sysdb verification. OBFL will fail to function as config data is kept in sysdb.), (Recommended Action: Please restart the process manually. If the issue is seen after restart then, collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-0-CHASSIS_SHUTDOWN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Chassis is shutting down due to reason mentioned.), (Recommended Action: Examine chassis based on above message. If chassis shutdown is due to low voltage on both power shelves, then please examine the battery and replace if necessary. Note that in all cases of shutdown, the chassis needs to be manually power cycled, or the RPs physically OIR'd so as to boot the chassis again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-ATTRKEY_BAD
### Response:
(Severity: 3), (Category: ROUTING), (Description: There is a problem with the attribute key generation routine.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SFP_ACK_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_LWM_ATTACH
### Response:
(Severity: 7), (Category: HA), (Description: The msg_chan_attach function reported an error trying to attach to the Embedded Event Manager server channel.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-3-SYSDB_CONNECT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The policy_repository process failed to bind to the system database at the displayed bind point.), (Recommended Action: The policy_repository process must be restarted before it can function correctly. If error message occurs again, copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-4-CERR_REGISTRATION_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: Error string reistration failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-RACK_SLOT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-3-TUPLE_UNPACK_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Error while unpacking ltrace tuple), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-6-USER
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: A VPDN session has been terminated due to user action such as user inactivity has exceeded the configured idle time or user has hung up the call.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INIT-4-INSTALL_TIMEOUT
### Response:
(Severity: 4), (Category: OS), (Description: The pakage installation sync did not complete in time. This could indicate that the node is hung and may require a reset.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-JID_MISSING
### Response:
(Severity: 3), (Category: OS), (Description: JID missing from table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CALVADOS_DUMPER-6-HOST_REMV_SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: Dumper has deleted file successfully), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-CARD_IDPROM_READ
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA driver was not able to retrieve a valid IDPROM image from the indicated card. This failure will prevent registration of detail card information to the system inventory. The card will show up with UNKNOWN card type in <CmdBold>show platform<noCmdBold> command output and it won't be fully operational due to this failure.), (Recommended Action: Use <CmdBold>hw-module location<noCmdBold> <CmdArg>location<NoCmdArg> <CmdBold>reload<noCmdBold> command to reset the card to see if it can clear any I2C issue that was preventing the reading of the IDPROM. If the problem is due to IOFPGA FPGA not ready as indicated in the error message, then there is some HW issue that is preventing IOFPGA FPGA from booting. If <CmdBold>hw-module location<noCmdBold> <CmdArg>location<NoCmdArg> <CmdBold>reload<noCmdBold> command cannot reset the card, try to physically OIR remove and then insert the card to see if IOFPGA FPGA will boot. The status LED should turn on to solid yellow color when IOFPGA FPGA boots.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLX8749_CDMA-6-LTRACE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that Ltrace context is NULL), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_SYSDB_BAG_DECODE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-LASER_ON_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Operation of turning on the Laser for Coherent Optics Failed), (Recommended Action: As a workaround Optics controller can be admin shut and no shut to attempt recovery)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLCTRLR-3-PORT
### Response:
(Severity: 3), (Category: L2), (Description: This error will not cause any functional impact.Only log creation and reporting won't be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-CONFIG_ABORT
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to get the startup config file name.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-SHUTDOWN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: locald process failed to shutdown properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE4_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE4_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_HARD_RESET_START
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and need to hard reset, this marks the beginning of it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-CORRUPTLIFETIME
### Response:
(Severity: 4), (Category: ROUTING), (Description: 'ISIS received the remaining lifetime value which is less than ZeroAgeLifetime, 60 secs'), (Recommended Action: Identify the source of the offending packet and correct it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_L2TP-7-INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the L2TP module in the platform L2FIB L2TP component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-FAILED_OUTPUT_USEFUL_INFORMATION
### Response:
(Severity: 4), (Category: INSTALL), (Description: Useful information was available but failed to be output to the user.), (Recommended Action: Repeat the operation. Consult the release-notes if applicable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRv6-5-LOCATOR_CONFIG_MODE_SET
### Response:
(Severity: 5), (Category: ROUTING), (Description: SRv6 and SRv6 micro-segment co-existence is not yet supported. To enforce this, the SRv6 configuration mode is set to either SRv6 or SRv6 micro-segment for locator configuration. This mode is set to SRv6 or SRv6 micro-segment based on the first locator configuration of 'prefix' or 'micro-segment behavior' repectively. In order to operate in other mode, the configuration for locator prefix and/or micro-segment is to be removed first for all locators, and then reconfigure accordingly. This notice is issued whenever the SRv6 config mode is set to SRv6 or SRv6 micro-segment.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FC-3-FW_OPERATION_ERROR
### Response:
(Severity: 3), (Category: INSTALL), (Description: Errors from the fw server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_EVENT_MANAGER
### Response:
(Severity: 3), (Category: OS), (Description: A call to an event manager interface failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIAD-4-SIGNAL_OP_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Signal masking or handler installation failed with the reason shown), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture the running process core with dumpcore and 'show process pcmciad')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-AVL_TREE_CORRUPT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: During restart, corruption was detected in the AVL tree. Tree is reinitialized as part of recovery, some interval history during this time could be lost for the flow), (Recommended Action: No action is required if it is flow tree. Process will try to recover by recreating the tree. In case of interface tree, remove all the policy config on the LC. If that fail, reload the LC If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-VALIDATE_FILE_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to sanitize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_LOGGER-7-NO_STORAGE_DEVICE_FOUND
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The service that copies /tmp/bcm.log, stp.log, es_persist to persistent storage, did not find any of harddisk, disk0, disk1 available), (Recommended Action: See if any of harddisk, disk0, disk1 are accessible on the RP. If they are accessible, restart bcm_logger.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_RECV_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering performance counter with stats infra failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-HW_DOUBLE_ECC_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: NP detects double ECC ERROR and reported through interrupts), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_CLIENT-3-GEN_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A generic failure has occured in the FPD Client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-FMEA_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: 'FMEA poller detected a fault'), (Recommended Action: Reboot the device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-6-BOARD_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_CORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory correctable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-5-QLIMIT_RANGE
### Response:
(Severity: 5), (Category: QOS), (Description: Configured queue-limit is below minimum supported queue-limit and the queue-limit is set to minimum supported value), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_37
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_SIM-7-ERROR_REG_PM
### Response:
(Severity: 7), (Category: MEDIA), (Description: pm_fault_register_device() API return error), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-4-CM_CONNECT
### Response:
(Severity: 4), (Category: HA), (Description: lrd library could not connection with cm service), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-6-INFO
### Response:
(Severity: 6), (Category: SERVICES), (Description: The message is just an information of the role bit.), (Recommended Action: Refer information mentioned in: http://wikicentral.cisco.com/display/PROJECT/CGv6-ISM http://wikicentral.cisco.com/display/PROJECT/CGv6-ISM-TSG-FAQ)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BRIB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the BGP RIB. If this occured during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ASIC_INITIALIZED
### Response:
(Severity: 6), (Category: FABRIC), (Description: This indicates Fabric ASICs are initialized and is expected during normal operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-ING_L4_ARRAY_UFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: L4 array underflow on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_0_PKT_MAXLEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on FIA to NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_4_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUB_UTIL-4-TRACE_SHUTDOWN
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is a non-fatal error in closing tracing buffer and can happen when the router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: Check the memory state of the ltrace process and overall system. Reduce the activities on the system if required for tracing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can RPL policies be parameterized in IOS XR?
### Response:
RPL policies can be parameterized using the '$' syntax. Parameters can be defined in the policy and supplied with values when the policy is attached to a BGP neighbor. This allows the same policy to be reused with different parameter values for different neighbors.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-6-PROC_BLOCK
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Drp pairing process will be blocked until active RP comes up.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-5-PER_PREFIX_GLACIAL
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route accounting for a route), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ILLEGALENTERTUPLE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The enter tuple is invalid. The calling function and enter string and command are displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Encountered an initialization error for avsm l2fib.), (Recommended Action: Please collect the 'show logging' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-6-RED_CONN_OPEN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Redundancy connection got opened and connected properly.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens when you delete a physical interface configuration in IOS XR?
### Response:
When you delete a physical interface configuration in IOS XR, the system automatically removes all configuration associated with that interface, such as IP addresses, routing protocol configuration, and QoS settings. This simplifies interface removal and ensures consistency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-PCA_READ_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Prints informational messages from CAI RDM library The message indicates an error was detected but RDM server continues to operate), (Recommended Action: Check if any of the rdm client processes are exit or crashed)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-4-INIT_LTRACE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The process will continue with it's business, however, cause of why hbagent was not able to initialize tracing should be tracked down. As result of this error, hbagent will not have any tracings.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-4-XR_LV_RECREATE_REQ
### Response:
(Severity: 4), (Category: INFRA), (Description: The XR LV create request from SDR Mgr. But this request has recreate flag set. Install will ignore the old XR LV and create a fresh one.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-MKPDU_VALIDATE_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Received MKPDU identified by the given CA(CKN) & RxSCI, failed one or more of the following validation checks, - MKPDU packet length (invalid / min length / not a multiple of 4 octets), - Correct paramset order & existence of MKA payloads, - Supported Algorithm Agility, - Duplicate MI verification if peers exist, - Duplicate SCI verification if peers exist.), (Recommended Action: contact cisco-support by sharing the tech-support macsec.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ERR_MSGQ_RR_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver failed to create a message queue used for inter-thread communication during the driver initialization.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-6-MPA_FPDUPGRADE_ACTIVE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MPA reload is not possible when MPA FPD upgrade is in-progress.), (Recommended Action: Wait MPA FPD upgrade to complete and Reload MPA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-FM_CREATE_GROUP
### Response:
(Severity: 3), (Category: OS), (Description: An internal fm create group function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZEN-3-SECURE_BOOT_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: A Secure Boot validation error has been detected on the indicated card. CPU Complex driver will try to recover from this failure by power-cycle the card.), (Recommended Action: If the problem is persitent after multiple retries, it could be hardware related problem with the CPU-Complex-FPGA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_THREAD_ATTRIBUTE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while setting the thread attribute during the process initialization sequence. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1_LNM-5-DISABLED
### Response:
(Severity: 5), (Category: L2), (Description: Link Noise Monitoring has been disabled for the level and T1/E1 controller specified in the message.), (Recommended Action: This is an informational message to notify that Link Noise Monitoring has been disabled on the T1/E1 controller identified in the message. No user action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-DU_SYSDB_HW_TREE_UNBIND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unbinding of sysdb to hw tree gets failed. Also publishing information to sysdb and setting up of sysdb name for platform in hw tree got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IDB_LIB-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-CHANGE_ECHO_SOURCE_ADDRESS_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failed to change echo source address and construct echo packet hdr for BFD session.), (Recommended Action: Recreate the BFD session and reconfigure echo source address for it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SLICE_CFG_MISMATCH_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A mismatch happened between configuration copied from RP and pushed by sysdb.), (Recommended Action: Reload LC. If this condition persist after reloading LC, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDP-3-TIMER_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the UDP process sets up and initializes the various UDP timers.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-WARNING
### Response:
(Severity: 4), (Category: OS), (Description: Warning conditions are present. Possible resource shortage or coding error.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_GET_TUPLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed on a call to system manager to retrieve its tag name during process initialization. It's an internal software fatal error. IS-IS process will abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-MISC_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected an error), (Recommended Action: Please contact technical support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng auto-tunnel backup' command in IOS XR?
### Response:
The 'mpls traffic-eng auto-tunnel backup' command is used to enable the automatic creation of backup tunnels for MPLS TE. Instead of manually configuring backup tunnels, this feature automatically creates backup tunnels based on the configured parameters. This simplifies the configuration and management of FRR.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_FAN_MFGMEM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Fan Manufacturing Data Memory (EEPROM) Failure (SAT_FAN_MFGMEM) alarm is raised when the fan-tray assembly manufacturing data memory (or EEPROM) fails.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-PAR_MERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multi bit mem parity error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-6-QUICK_REBOOT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message, requesting userid to be root), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-KILL_SCRIPT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A problem was encountered while executing the indicated script.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAOC768-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is a informational message in the PLAOC768 driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_1_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_4
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PUNT link has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-4-SETSOCKOPT_BADF
### Response:
(Severity: 4), (Category: IP), (Description: An error occurred whilst trying to setsockopt on the socket. Session will be closed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALARM_LOC_TEST-4-SIMPLE_NO_SOURCELOC
### Response:
(Severity: 4), (Category: MGBL), (Description: This is a simple message with alarm_location set to false), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_INIT_POLICERS
### Response:
(Severity: 7), (Category: OS), (Description: It failed to program a flow policer during initialization.), (Recommended Action: When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-1-I2C_TIMEOUT_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does the Replicated Data Service File System (RDSFS) contribute to high availability in IOS XR?
### Response:
The Replicated Data Service File System (RDSFS) in IOS XR is used to replicate configuration files and other critical files across RPs for high availability purposes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
aaa_task-3-DLLMAIN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error message from debug module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) failed in an attempt to communicate with the sysdb subsystem. This is normally a transient problem that will correct itself. If the problem persists, configuration of the router, and the display of status and counter information, may be impacted. To aid diagnosis in this case, look for other error messages arising alongside this one.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-5-PORT_WRONG_ADJ
### Response:
(Severity: 5), (Category: IP), (Description: A port down message was received from an adjacency with a different sender name as compared to the sender name from which the port up message was received. The software has ignored this event. The reason for this is existance of duplicate ports on external devices.), (Recommended Action: The configuration on the remote ANCP client should be evaluated for duplicate port circuit names on remote ANCP client devices.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_12_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-BIND_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Bind failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-ACTIVATE_DONE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package activate requested on this satellite has completed. Run 'show nv satellite status' for more information.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_2_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
METRO_STATS_API-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in the Hardware Stats Manager Library to indicate anomalies. In most cases these messages will stop once the temporary condition is resolved. Examples of when this error occurs are: 1. The client connection handle received is NULL 2. The arguments to the bind message are incorrect 3. Unable to bind to the hardware IPC driver 4. Error while trying to initialize debug event. 5. Not enough memory to bind to the client), (Recommended Action: No action is required. These are Debug messages. An error was returned by Stats Manager APIs to applications. Applications receiving this error will report the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-2-ERR_MAINTENANCE_MODE
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fabric driver detected hardware errors and requested sysmgr to place the card in maintenance mode. But sysmgr failed to do so. The card and its fabric ASICs should have been isolated from the system before attempting going to maintenance mode.), (Recommended Action: Check the health of the sysmgr process on the node. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-NOT_YET_IMPLEMENTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT, a function was not implemented.), (Recommended Action: An healthy running box, should not hit this point. Please contact TAC Support Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_SOCK-4-INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-IPC_ERROR
### Response:
(Severity: 7), (Category: HA), (Description: As part of IPC operation, a call to a function failed with the specified error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-AGENT_ALREADY_DEREGISTER
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Licensing has already deregistered with Cisco, use the force option to register again.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-DUMP_CORE_FAILURE
### Response:
(Severity: 7), (Category: OS), (Description: Dumping core might fail under many cases like, the devctl system call might fail to fetch the data of the process. All the paths configured might not be accessible. Multiple processes are crashing continuously without giving time for dumper to dump core file of crashed process. These migh be the reason.), (Recommended Action: Please ensure that enough free space is present on the configured path. Contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_7_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-3-FILESYSTEM_INVALID
### Response:
(Severity: 3), (Category: OS), (Description: Platform returned a filesystem to write ltrace configuration data, but an error occurred while accessing it.), (Recommended Action: Check if the filesystem is valid, and is not present due to some hardware issues. Else Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-SYSDB_REGISTER_NOTIFICATION
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-UPTIME_HIST_TOO_LARGE
### Response:
(Severity: 7), (Category: OS), (Description: A historic uptime record too large, or internal parameter might be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECY_DRIVER-0-PKTS_DROP_DETECTED
### Response:
(Severity: 0), (Category: L2), (Description: Secy Driver has detected an increase in Dropped packet counters when MACSec is enabled for the specified Rx SCI. The counters increase as a result of packets getting dropped due to varied reasons.), (Recommended Action: Collect showtech macsec and contact cisco-support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_EVM
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver was unable to attach the indicated event / handler to the event manager. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-1-DISK_NOT_ENCRYPTED
### Response:
(Severity: 1), (Category: OS), (Description: Active RP on this system has encryption activated, while this card does not. It may have been deactivated or a reimage has removed this partition. In order keep the system secure it is recommended to activate encryption on all the nodes.), (Recommended Action: Execute 'disk-encryption activate location <>' CLI to activate encryption on this card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-6-MAC_MOVE_NOTIFICATION
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Mac Movement alert for VPLS Bridge-domain only when the mac move notification is enabled via CLI.), (Recommended Action: No action needed from user.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTSDRVR-4-OTS_PPM_INFO
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates insertion or removal of xfp sfp modules), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-4-LOG_MTU
### Response:
(Severity: 4), (Category: IP), (Description: The link payload is lesser than the IPv4 link MTU. Hence the operational MTU is set to the link payload and not the configures MTU value), (Recommended Action: Choose IPv4 MTU value lesser than the LINK payload value)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-7-CONFIG_ERR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The Platform Manager encountered an internal software configuration error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_LNK_FAULT_ERROR_7
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the XFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do XFP OIR. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVQ_DEQUEUE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is an unexpected error. The PPPoE MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-6-UPD_LIMIT_ACCOUNTING
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-XR_SYSADMIN_VERSION_MISMATCH
### Response:
(Severity: 3), (Category: INFRA), (Description: In SOST mode, admin and XR have to be in same version. In some unexpected reload following a upgrade admin and XR can boot with different version. One more reload can bring the admin and XR to same version.), (Recommended Action: Reload the entire system and not individual VMs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-FW_MGR_OPERATION_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Errors from the fw manager process. This error might occur due to 'AUTO UPGRADE' feature getting some errors due to sysdb_bind(), getting invalid arguments etc.,), (Recommended Action: If this error occurs the auto FPD upgrade will fail. This means that once the router is up from the install upgrade the FPD will have to be upgraded using the upgrade CLI and then the router will need to be rebooted for the new FPD images to take effect. If the CLI also fails then call Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_PAKMAN
### Response:
(Severity: 4), (Category: L2), (Description: A packet manager corruption has been reported and the Bundle Manager process has failed to cleanup to recover from the problem. The process will exit and be automatically restarted to recover from this situation.), (Recommended Action: It is expected that restarting the process will fix this problem. This is done automatically so no action should be required. If the problem recurs, then there is a problem in packet manager. A drastic solution would be to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-EVENT_CONN_DESTROY_FAILED
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error occured), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_DMA_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected that the switch's DMA engine has stopped transmitting packets injected by the ESD process, and/or has stopped delivering packets to the ESD process. When this occurs, ESD is not able to send/receive MLAP packets on behalf of the MLAP process, which can result in control ethernet connectivity problems. In order to recover, the ESD process resets the switch, then exits so that it is restarted by the process manager.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-AUTO_ABORT_TIMER_RUNNING
### Response:
(Severity: 4), (Category: INSTALL), (Description: The auto-abort timer is running.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: There was a software error during process startup.), (Recommended Action: If this message is not seen repeatedly and no other adverse effects are observed then there is no need to take any action. Otherwise, check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart, then take the required action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-6-CAP_CHANGE
### Response:
(Severity: 6), (Category: ROUTING), (Description: A capability was installed/updated/uninstalled by an LDP client. LDP peers will not learn of the change until the LDP session has been reset.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-2-ECC_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The DMAC device encountered an unrecoverable ECC error condition. This would require a reset of the device to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_OPEN_DIR
### Response:
(Severity: 7), (Category: OS), (Description: Failed to open qsm dir after retrys), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-FRIS
### Response:
(Severity: 3), (Category: ROUTING), (Description: The FRIS request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INVALID_SLOTID_IN_BOOTREQ
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the slot Id in the boot request from rommon to shelfmgr is invalid, therefore ignore the boot request.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAIPC_NETIO-7-UINT32_GET
### Response:
(Severity: 7), (Category: OS), (Description: pak_netio_uint32_get() failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabricq encountered a memory allocation error. Memory allocation failures will happen if the the router runs out of memory or memory leak in this process or other processes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_8P_GE-4-INVALID_MAC
### Response:
(Severity: 4), (Category: L2), (Description: PLIM driver was unable to get a MAC address for the interface.), (Recommended Action: Check if the process 'shelfmgr' is up and running on the RP. Try to reload the LC to see if that helps. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-5-CONFIG_I
### Response:
(Severity: 5), (Category: MGBL), (Description: The routers's configuration was changed.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of setting the TURBOBOOT ROMMON variable?
### Response:
Setting the TURBOBOOT ROMMON variable allows booting an IOS XR .vm image directly from the ROMMON mode without the need for an intermediate boot image. It specifies the boot device and the directory where the .vm image is located.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT encountered a fatal memory allocation error), (Recommended Action: Collect console log and the following information and contact TAC support with this info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show process spp -show process netio -show process pakman -debug netio drivers location <loc> -show logging process spp <loc> -show logging process netio <loc> -show logging start [time of day when this msg was seen] -show netio trace all location <loc>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-DTI_MODE_NOT_SUPPORTED_IN_HARDWARE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The synchronization ports 0/1 are for DTI mode, but this mode is not supported on this platform), (Recommended Action: Do not attempt to configure DTI on RP clock interfaces 0 and 1)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_CHAR_ALIGN_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 char alignment error on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-RPM_REBUILDDB_TIMEOUT
### Response:
(Severity: 4), (Category: INFRA), (Description: inst_mgr waited for too long for inst_agent to complete rpm --rebuilddb'), (Recommended Action: If show version, show install CLIs and install operations fail, restart inst_mgr process on Sysadmin. If the CLIs continue to fail, collect 'show tech-support install' and forward the logs to TAC. Provide details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-ADJ_WARNING
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv6 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log and following traces: show cef trace loc <> show cef platform trace [common|ipv6] all loc <> show adjacency hardware trace loc <> show bundle trace all loc <> show im trace loc <> Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-IDT_DEVICE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IDT Recovery clock device in reset or recovered), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_REGISTER
### Response:
(Severity: 4), (Category: IP), (Description: Registration for an IOSXR service failed during ARP's operation. This may i ndicate a connection failure with the IOSXR service as indicated in the error message. In this situation, ARP restarts, and this should resolve the problem.), (Recommended Action: Restarting the process may fix the issue. Please collect the output of show tech-support arp. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-ERR
### Response:
(Severity: 3), (Category: L2), (Description: The error occurs for the following reasons, - When trying to install SFP/XFP into SPA during SPA bootup. - When bad or unsupported optics are inserted - During SFP/XFP initialization failure - Corrupted IDPROM %s - xcvr opticx location), (Recommended Action: - Turn on SPA error message, keep reloading the SPA until the debug message shows that the SFP init is passed - If the checksum error points to corrupted idprom then there is no software issue. Please reseat the sfp)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spa_cema_platform-3-AIB_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The spa cema Partner initialization failed while trying to connect to AIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-INSTALL_RESTART_RECREATE_INTERFACES
### Response:
(Severity: 4), (Category: INFRA), (Description: The Install component has detected a change within xlnc_recreate_intfs.txt. The following will happen, all capture sessions deleted, all EXI interfaces deleted, and all 'to_xr' interfaces will be deleted, then the XLNCD process will restart.), (Recommended Action: Please wait for XLNCD to restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G_PLIM_QOS-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: %s - IM controller creation error message), (Recommended Action: No action. This is just an info message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-REPLICATOR_NO_CB
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB replicator module on the active server did not receive a callback from the transport library. The request will be allowed to continue without the replication acknowledgement. If any replicas have not received the update, they will resync on the next update.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-GENERIC
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-UNSUPPORTED_IFTYPE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The interface type is not yet supported by OSPFv3.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-6-TEST_ISSU_RUN_MDR_COMPLETE_SLEEP
### Response:
(Severity: 6), (Category: INSTALL), (Description: Informs the user how many seconds the node is sleeping before MDRing during a 'test ISSU-run' operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How is an IOS XR release version identified in the image or PIE filenames?
### Response:
An IOS XR release version is identified by a numerical suffix value added to the image or PIE filenames. For example, a 3.6.0 suffix identifies an IOS XR mainline release 3.6.0. Mainline releases normally end with a zero as the last decimal number in the suffix.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_MACSEC-6-DELAYED_PACKET
### Response:
(Severity: 6), (Category: OS), (Description: Delayed packet, where PN < NXT_PN Window size will not be configured.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-CPUTUNES_INTERNAL_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Virt-manager and its associated infrastructure experienced an internal error.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_LIB-7-ERR_GET_CARD_TYPE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The platform library service call to find the remote node card type has failed. The calling application handles it appropriately.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_INIT-3-ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS EA process encountered the specified error), (Recommended Action: Collect the outputs of 'show qos-ea trace all location <location>' and 'show process all location <location>, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_15_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-DEF_SYNC_HANDLER_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in attaching the library's default sync handler.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-4-SERVICES_PLIM_MISPLACED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Services PLIMs in the lower slot (s = 8..15) may only be powered on if there is no Non-Services PLIMs powered on in the paired upper slot (s-8).), (Recommended Action: Place the Services PLIM in an upper slot 0 - 7, or in the lower slot (s = 8..15) where there is no Non-Services PLIM in the upper slot (s-8).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-7-SYSDB_FAIL
### Response:
(Severity: 7), (Category: SERVICES), (Description: An error has occurred while doing a sysdb operation. See the message text for error details.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL_MGR-6-INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-SHUTDOWN
### Response:
(Severity: 3), (Category: ROUTING), (Description: The RIB process has performed a graceful shutdown and will be restarted.), (Recommended Action: Check to make sure the process has restarted. If not, restart manually Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_7_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-3-OWNERSHIP_PROCESS
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The identified client attempted to access a packet that does not belong to it.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-INVALID_VSA
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-2-ERR_EXT_MEM_MBE
### Response:
(Severity: 2), (Category: FABRIC), (Description: Ingressq external memory MBE), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-CONN_TO_SHELFMGR_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to coneection failure to shelfmgr. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-1-GUE_PORT_NOT_UNIQUE
### Response:
(Severity: 1), (Category: FABRIC), (Description: We cannot have same GUE port numbers, all must be distinct.), (Recommended Action: All GUE ports must be unique or it will set default values.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-VRF_DELETE
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-INTERNAL
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB server has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-6-INVALID_CARD_TYPE_ERROR
### Response:
(Severity: 6), (Category: FABRIC), (Description: The message is seen when we fail to read the EEPROM for board revison. Check platform libraries & i2c bus connectivity.), (Recommended Action: Check the EEPROM programming, environmental condition and the type of board that is inserted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-MASKFORMATINIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to initialize the maskformat in prefix form failed. The error is displayed in the message'), (Recommended Action: Collect show nvgen trace, show logging and send this to tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNLC_FPD-3-SYSDB_INIT_FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-INTERNALERR_RC
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_SM_INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Failed to initialize above APS sm.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-EVENT_MANAGER_DESTORY_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to destroy event manager on exec exit'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_LOW_TEMP_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature less than or equal to the low temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-NULL_PTR
### Response:
(Severity: 4), (Category: INSTALL), (Description: Unexpected parameter value passed to function.), (Recommended Action: This error would be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MADISORN-2-INIT_FAILED
### Response:
(Severity: 2), (Category: OS), (Description: Madisorn was unable to start and the router will reload.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-ARB_SERDES_0_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Arbitration serdes link 0 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP refresh reduction in Cisco IOS XR?
### Response:
To configure RSVP refresh reduction, use the 'rsvp signalling refresh reduction' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp signalling refresh reduction
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_15_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHANCON-3-SVC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A service API failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_HWOFFLOAD-4-NP_TIMER_SCALE_LIMIT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: NP level scale limit for this timer has been reached.), (Recommended Action: All new sessions with this timer on this NP will be kept in ADMIN-DOWN state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-4-PREFIX_INCONSISTENT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The user is trying to set an ip-prefix which is inconsistent with the specified mask), (Recommended Action: The policy_repository process may ignore the match condition containing the inconsistent prefix.It's recommended to correct prefix & mask value)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-NSR_TCP_MSG_INVAL_TX_CTX
### Response:
(Severity: 4), (Category: ROUTING), (Description: Message was enqueued with non-NULL transmit context when NSR is disabled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPPIF-2-OPEN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the lc idb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-REMOVE_GROUP_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Unable to add membership to the group.), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_7_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_LIB_TOKEN-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug.), (Recommended Action: This is not a critical error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge domain service instance?
### Response:
To configure a service instance for an L2VPN bridge domain, use the 'service instance' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
service instance 100 ethernet
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_RM-4-BANDWIDTH_MSG
### Response:
(Severity: 4), (Category: L2), (Description: Insufficient bandwidth available. possible cause: Too many vc's inheriting QoS from class parameters %s - gives the name of the interface %u - gives the available bandwidth size %u - gives the bandwith that failed to apply), (Recommended Action: check vc class configuration on interface If there are vcs you want specific QoS values for under the main interface, try configuring QoS on these vcs before applying class to the interface in order to stop unwanted inheritance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP has successfully completed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-PACKET_NOT_ENCRYPTED
### Response:
(Severity: 4), (Category: SECURITY), (Description: Received packet should have been encrypted by peer but wasn't.), (Recommended Action: 'Contact remote peer's administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISSU_IMPROPER_NODE_INFO
### Response:
(Severity: 3), (Category: INSTALL), (Description: Improper node info provided for the given node while updating inventory data.Issu operation will continue running), (Recommended Action: ISSU operation on specified node will be effected. Retry operation to overcome it. If the issue persists even after tries, contact tac with 'show tech-support issu'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-SYSDB_BSCAN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace sysdb error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace sysdb error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show sysdb trace client-errors<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show sysdb trace client-errors<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_0_OFLOW_NPU2BR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-0 NPU to bridge instance-1 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_REROUTE_PENDING
### Response:
(Severity: 5), (Category: ROUTING), (Description: Interface is now in re-route pending state and may stay in this \ state forever until the interface finds a valid path. This syslog \ could show up on the headend under serveral cases: 1. The headend detected that the path that the LSP was originally \ signalled on got invalidated (verification failed), includes: - A link (or more) along the LSP path was withdrawn from TE \ topology (e.g. after a link failure/FRR) - Attributes of a link (or more) along the LSP path do not satisfy \ the tunnel affinity defined on the headend - The path traversed by the current LSP is overloaded - one or more \ nodes along the path are flooding overloaded condition 2. The tunnel newly requested bandwidth (after initial setup) could not \ be satisfied-- the headend could not find a feasible path. The tunnel \ will remain up and headend will constantly try to compute a path that \ satisfies the newly requested bandwidth. May happen when tunnel \ requested bandwidth can not be satisfied. In such case, this syslog \ is preceded by the insufficient bandwidth syslog, e.g message \ LSP_INSUFFICIENT_BW or S2L_INSUFFICIENT_BW.), (Recommended Action: This is a solicited message. User may verify interface configuration and \ network topology.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-XFP_ALARM_THRESH
### Response:
(Severity: 2), (Category: L2), (Description: XFP alarm condition interrupt exceeded the defined threshold. Software will disable the interrupt. It is recommended to replace the XFP module.), (Recommended Action: Replace the XFP module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-USAGE_STATS_FAIL
### Response:
(Severity: 4), (Category: SYSDB), (Description: Failed to clear Sysdb statistics.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700_DLL-3-CLEANUP_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CPU Control, Dynamic Link Library (DLL) failed to cleanup. The effect is relatively minimal and should not be of concern in and of itself. Some minor resource may or may not have been properly returned to a system resource pool. %s - description of the specific failure encountered %s - error detail, if appropriate), (Recommended Action: Should this error occur repeatedly within the context of other system errors then copy the contents of the system log or as much of the contents of the system log as is possible from around the time that the problem occured, gather output from the 'show tech-support' command, call your Cisco technical support representative and provide this information to the representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-7-INVALID_RECORD_TYPE
### Response:
(Severity: 7), (Category: OS), (Description: Invalid record type), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_INR_VLAN_SES_TRSHLD_NO_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Inner VLAN on the given access interface is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-PREFIX_SID_CFG_SRGB
### Response:
(Severity: 6), (Category: ROUTING), (Description: Configured prefix SID is outside of SRGB.), (Recommended Action: Make sure configured prefix SIDs are inside SRGB.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-ERR_SYSDB
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PW_INTR_HDR_PRS_SOP_SEEN_SOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PW_INTR_HDR_PRS_SOP_SEEN_SOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the max-area-addresses command in IS-IS?
### Response:
The max-area-addresses command is used to configure the maximum number of area addresses that the IS-IS instance will accept in received LSPs. By default, a router can have up to three area addresses. This command allows you to increase that limit if necessary in your network topology.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Configuration Manager in IOS XR?
### Response:
The Configuration Manager in IOS XR is responsible for processing configuration commands entered by the user, validating the commands, and applying the configuration to the relevant processes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-PREFIXES_FULL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The route prefix table has become full--either because the table reached the configured maximum fill level, or a maximum of 2,000,000 prefixes are stored.), (Recommended Action: If the maxmimum configured number of allowed route prefixes is configured lower than the allowed maximum of 2,000,000, update the configuration to allow a larger number of route prefixes. This threshold is set using the 'maximum prefix {max_prefixes} {low_threshold_percentage}' command. This command can be set per virtual router (vrf) or for the main routing table.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-UC_LO_MBE_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Unicast low priority fifo multi-bit ECC error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-2-ALARM_CRIT
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: Autogenerated alarm), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INRESET_BRINGDOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node has reached maximum number of resets allowed, therefore, it is brought down to IN_RESET state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_WAIT
### Response:
(Severity: 4), (Category: IP), (Description: An error occurred while waiting for the specified event. In this situation the process will terminate and ARP restarts.), (Recommended Action: In this case the process would recover by itself. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-PLATFORM_DATA_FILE_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An error happened while reading the platform data file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-0-LC_NP_LOOPBACK_FAILED_RX_PATH
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This line card has detected a problem with the packet punt and injection path between this line card CPU and some network processor(s), and the consecutive failure count has reached or crossed the failure threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_PRTC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from PRTC.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ASIC_FREEZE_PRE_SCAN
### Response:
(Severity: 6), (Category: FABRIC), (Description: Freeze state of the ASIC before initiating ASIC scan.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_LNK_FAULT_ERROR_4
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the XFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do XFP OIR. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_2_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power less than or equal to the low Tx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-DEBUG_INFO_STAT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured during the initialization of the process. The cHDLC MA process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SYSDB_PACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature less than or equal to the low temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_LASER_EOL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PROVISION_COMPLETED
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when a provision disk request has been completed sucessfully), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_COMM_DRVR-3-ERR_INTERNAL_SW
### Response:
(Severity: 3), (Category: FABRIC), (Description: The SFE common infra driver driver encountered a SW error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-TRACE_BACK
### Response:
(Severity: 6), (Category: OS), (Description: Trace back), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-WARNING_FSM_EVENT_DROP
### Response:
(Severity: 4), (Category: ROUTING), (Description: Traffic-eng FSM dropped an event, because the S2L was created after the event was posted.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HEADLESS_MGR-4-INIT_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A failure occurred during the initialization of headless_mgr process. The exact reason for the failure can be found in the message. This could happen because of the following reasons. 1) A problem in allocating local resource because of memory shortage or software error. 2) Problem in initiating connection to an external/dependent module either because the external module is not ready or a race condition has occurred. 3) Software error either in local or external module.), (Recommended Action: System will retry to start the process and no user intervention is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-6-INFO_SINGLE_NODE_TOPO
### Response:
(Severity: 6), (Category: L2), (Description: The topology discovery resulted in a single node being found. This is most likely a transient condition during initial ring bring-up.), (Recommended Action: Verify that the condition is not transient by using 'show srp topology' CLI. Verify the interface is not physically looped back, meaning side A is connected to side B. Verify that the other nodes are not in PassThru mode (ADMIN DOWN). Verify that neither of the adjacent nodes have the same BIA address by using 'show interface srp' CLI. If a duplicate BIA address is found: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-5-SECURITY_MAC_SECURE_VIOLATION_PW
### Response:
(Severity: 5), (Category: L2), (Description: The MAC secure in the pseudowire has detected violated packet. This might be a security attack. A relearn attempt had been made on the pseudowire for a MAC address which had been already learned by another secure port. One of following action might be configured and will be taken on this pseudowire: - Restrict: drop the packet and disable the learn attempt - None: forward the packet and allow the MAC to be relearned - Shutdown: shutdown the port on which the learn attempt was made If no action has been configured, the restrict action will be taken by default and packet has been dropped.), (Recommended Action: Fix the root cause of the mac security action and use l2vpn clear command to bring back this port; (<CmdBold> clear l2vpn bridge-domain <NoCmdBold>).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_LOSS_OF_SYNC_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on NPU-1 interface on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-SIGACTION
### Response:
(Severity: 4), (Category: OS), (Description: The Event Manager signal thread must install a signal handler for each signal that it is watching.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-6-GSP_LOOKUP
### Response:
(Severity: 6), (Category: OS), (Description: A call to group_lookup() failed. There could be a problem connecting to underlying gsp server or transport between RP and LCs. If this is seen for a long time, there might be a real issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-6-DATAPATH_CONTROL_FAILED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: im_caps_datapath_control to LPTS netio caps dll failed), (Recommended Action: This is not a critical error. Restarting lpts_fm may fix the issue. Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_TYPE_DISABLED_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Pkt received for timestamp type disabled on Decoder A on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-CTX_FREE_SPP_OWNERSHIP
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The identified client attempted to free the particle which is not associated with any pakman packet.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-2-MSG_TO_FSDB_FAILED_CONNECT
### Response:
(Severity: 2), (Category: FABRIC), (Description: This is to indicate that the process has failed to connect to the fabric management process to report that the plane is defective.), (Recommended Action: 1) Get the output from the following commands: 'sh controller fabric trace all' on the dSC sh diagnostic result location <this node> detail sh diagnostic trace error location all sh diagnostic trace message location all 2) shut down the identified faulty plane in admin configuration: controller fabric plane <> shutdown 3) restart the process that is seeing the issue Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-MMAP_ABORT
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition, the abort mmapping.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin summary location 0/x/CPUx - show shmwin trace all location 0/x/CPUx - show shmwin <win_id> list arena location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-REVERT_ECHO_SOURCE_ADDRESS_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failed to revert echo source and construct echo packet hdr for BFD session.), (Recommended Action: Recreate the BFD session and reconfigure echo source address for it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-STBY_FORCE_GO_ACTIVE
### Response:
(Severity: 4), (Category: HA), (Description: Redcon has been forced to go active even though the card is not ready.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-3-PROGRAM_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB EA layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to get MD5 router ID. This condition indicates a problem with the software on the card. - Failed to send message to x86. This condition indicates a problem with sending message from XR to x86. - Failed to program router ID. This condition indicates a problem with the programming router ID.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show logging show running-config show cli history detail loc <> </RP> <LC> </LC> <TECH> show tech-support location <> show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_MCAST-3-ERR_INFO_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM MCAST, error information), (Recommended Action: Please collect the console log, multicast traces (show mfib trace loc <>, show mfib hardware ltrace location <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SCP
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-MGR_OPEN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error when openning connection to the primitive resource manager.), (Recommended Action: Please collect output of the following commands: show platform show log show process blocked location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_UNF_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA00 Tx underflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-4-INFO_FAILURE
### Response:
(Severity: 4), (Category: SECURITY), (Description: SSH encountered authentication warning.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-3-SHELFMGR_STATE_NOTIFY
### Response:
(Severity: 3), (Category: INSTALL), (Description: Registration for shelfmgr node state notification failed. It will be retried for \ fixed number of times.), (Recommended Action: Please contact TAC after maximum retries.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FORGE_CGN_HA_AGENT-3-LTRACE_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Encountered an error in tracing module. This error should not impact the major functionality of the module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-2-LSPFULL
### Response:
(Severity: 2), (Category: ROUTING), (Description: L-LEVEL LSP filled to capacity, dropping routing information. This system cannot originate any more routing information because there's not enough space in LSP fragments to advertise.), (Recommended Action: This is usually caused by misconfiguration, such as redistributing large number of routes into IS-IS. Reduce the number of routes being redistributed into IS-IS to correct the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_PD-3-MISSING_CONFIG
### Response:
(Severity: 3), (Category: FORWARDING), (Description: Support for IPv6 Flowspec requires hw-module configuration.), (Recommended Action: Configure 'hw-module profile flowspec enable-v6 [location <>]'. Reload XR VM specific to location after enabling this configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-6-ENFORCE_OVERAGE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled in overage condition.), (Recommended Action: The customer may consider to purchase more licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XML_INFRA-7-INIT_ERR
### Response:
(Severity: 7), (Category: MGBL), (Description: There is a problem with the system infrastructure - perhaps the communication infrastructure has not yet stabilized.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICYMGR-3-APP_NAME_FAILURE
### Response:
(Severity: 3), (Category: APP_INFRA), (Description: An internal error encountered during policymgr initialization, configuration of one or more types of policy-maps/class-maps may not work.), (Recommended Action: Contact TAC with required_info, which will be only used for internal diagnosis purpose.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVC_ERROR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: After detecting an error with the connection to the specified service, PPPoE MA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-VM_RELOAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA device failed due to above mentioned error. VM will be reloaded to recover from failure.), (Recommended Action: Collect the above mentioned logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BQS_LIB-3-LOCK_NOT_RECOVERABLE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to make the mutex in consistent state results in not recoverable state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LOCK_FAILURE_LOCKTEST
### Response:
(Severity: 3), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-DB_CONSOLIDATE
### Response:
(Severity: 3), (Category: MGBL), (Description: The chain of configuration changes stored in commit database is possibly broken.), (Recommended Action: Use the command 'cfs check' to check/fix the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_NVSAT_EA-3-ICL_PROVISIONING_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error has been encountered and nv satellite ethernet interface cannot be provisioned.), (Recommended Action: Verify that the number of Interchassis Link(ICL) per NP per Satellite on the router does not exceed 1. It may get resolved by removing the configuration for the ICL that are on same NP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_MPLS_EA-3-ERR_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONCERTO-7-ERR_EXIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An error occurred in CONCERTO Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-IP_ARM_ADDR_INFO_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has encountered an error whilst manipulating a set of interface IP addresses. This may be a resource starvation problem or an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_THREAD_ONCE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to initialize the specified resource. This is an internal software programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-6-REGION_GROWTH
### Response:
(Severity: 6), (Category: L2), (Description: The ucode region dynamically grows its underlying physical memory by taking the indicated amount of memory from another region.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-6-SIGNAL_RCV
### Response:
(Severity: 6), (Category: INFRA), (Description: MLAP has received a signal. This may be user initiated or could indicate an error. MLAP may exit as a result.), (Recommended Action: Check the signal type. If not user initiated, then root cause of the signal needs to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_ST3
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ST3.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-BOTH_FC_REMOVED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Two possibilities to this message 1) An alarm has occured. Software has detected that both fan controller cards have been removed from the chassis but, but gives user 45 seconds to insert atleast one of them back into the chassis. If no action is taken within 45 seconds, the chassis will be shut down. 2) A previously occured alarm has been cleared. Software has detected that both fan controller cards were removed which would have shut down the system. But one fan controller was put back within 45 seconds, thus removing the need to shut down the system.), (Recommended Action: Two possibilities to this message. 1) An alarm has occured : Insert a fan controller card within 45 seconds. 2) A previously occured alarm has been cleared : *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-3-SYM_NOT_FOUND
### Response:
(Severity: 3), (Category: SERVICES), (Description: Symbol was not found in the library that was just loaded.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-4-SECRET_ALREADY_EXISTS
### Response:
(Severity: 4), (Category: SECURITY), (Description: An internal software error has occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_BSCAN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-RX_LF
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM received a Local Fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Correct the far end or fiber to this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CCM_SEND_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred when attempting to send CCM messages for a number of local MEPs, some CCMs will not have been sent. If the error persists, CFM may not operate correctly. The failure was triggered by the protocol event mentioned in the message description. Further errors of this nature will be supressed for the next 30 minutes.), (Recommended Action: If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, the error may be cleared by restarting the cfmd process on the node where the error is occurring, or shutting down and re-enabling any affected interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-WARN_UNEXPECTED_EXT_COMM
### Response:
(Severity: 4), (Category: ROUTING), (Description: A route has extended communities attached to it unexpectedly.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-ARB_SERDES_1_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Arbitration serdes link 1 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_OVF_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA01 Tx overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-VS_REGN
### Response:
(Severity: 3), (Category: OS), (Description: Unable to register for item with sysdb.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-CHASSIS_IDPROM_READ_FAIL
### Response:
(Severity: 3), (Category: DRIVER), (Description: This is a message to notify the user that RP IDPROM read failed and FAKE generated info is used.), (Recommended Action: This is an indication on HW failure and will need RMA of the board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE_UIDB-4-DEBUG_INIT_ERR
### Response:
(Severity: 4), (Category: L2), (Description: Initialization of the Debug infra process failed. Run time debug mesages will not be available for this component.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_CHASSIS_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Chassis temperature threshold crossing (SAT_CHASSIS_TEMP_ALARM) alarm is raised when the chassis temperature crosses minimum/maximum threshold.), (Recommended Action: If the problem persists, call your technical support representative)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPHC_PROFILE-2-MODULE_INIT
### Response:
(Severity: 2), (Category: L3), (Description: During process start up an unrecoverable error occurred. The process will exit and should be restarted by the System Manager which should recover the situation.), (Recommended Action: System will retry to start the process else restart the process using the command <CmdBold>process restart iphc_profilemgr<NoCmdBold>. If not recovered, contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-MAC_LIMIT_BD_SHUT
### Response:
(Severity: 4), (Category: L2), (Description: Number of MAC addresses in the bridge-domain has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the bridge-domain, it has been shut down. All the ports under the bridge too are automatically shutdown.), (Recommended Action: Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the bridge-domain up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-CARB_CRM_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter driver detected a carb crm error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-7-OPEN_FAIL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Failed to open the specified file, which is required to proceed further. The request or operation may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-PLANE_SHUTDOWN
### Response:
(Severity: 4), (Category: FABRIC), (Description: In a CRS-16 system, at least one odd plane and at least one even plane is required. In others, at least one plane is required. If all the planes are shutdown, the router goes into an unrecoverable state.), (Recommended Action: Try to unshut a plane. If it doesnt help, the only way out is to reload the router either from the CLI or powercycle. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOL_MAPPERC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-TCAM_PARITY_REPAIR_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. Multiple attempts have been made to repair the parity error at the row, however tcam is hitting continuous parity errors which cannot be repaired 2. If issue continously seen contact TAC), (Recommended Action: TCAM needs to reset which will cause board to reload. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr encountered an error during initialization resulting in restarting the Procmgr process. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still non-operational, execute 'process restart procmgr location <>'. If it the process still fails to spawn, contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-NSF_TE_TUNNEL_RESTORE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occured whilst recreating TE tunnel from the checkpointed information. NSF may abort.), (Recommended Action: Restart the ISIS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-MCAST_GTRIE_CERR
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred in L2FIB manager process due to failure in initialization of ipv4 multicast gtrie. This could have happened if gtrie has not been registered properly to the L2FIB manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-CHK_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Checkpoint Initialization Failure. The pla_server process failed to initialize its checkpointing data. The process cannot continue and needs to be restarted.), (Recommended Action: None, the process should recover. If it does not, the system will most likely be in an unrecoverable state and will take appropriate action. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an CFP temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-WINDOW_TOO_LARGE
### Response:
(Severity: 3), (Category: L2), (Description: There is an allowed range for window size in milliseconds. In this case, the configuration results in too long a window. Note that when window size is specified in frames or symbols, its length in milliseconds depends on the maximum bandwidth. This event has been disabled since it is not clear what behaviour is intended.), (Recommended Action: Consider changing the relevant configuration (i.e. the window size).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-SW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Jacket driver encountered an internal software error. The jacket driver will restart and unless the same error occurs on the next attempt the driver will function normally. If the error is persistent, it indicates the system error or HW error which needs further investigation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMS-4-YANG_META_DATA_CHANGED
### Response:
(Severity: 4), (Category: MGBL), (Description: The gRPC process detects that a meta data file used to support access to the corresponding YANG module has changed, removed or added. This event likely occurs when a package is installed or deinstalled.), (Recommended Action: To ensure the consistency of the internal YANG meta data structures in the emsd process it's recommended that the emsd process be restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-ERR_ASIC_CRC
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq block received a packet with a CRC error. It is primarily caused by either the link errors between the devices or packet corruption in the upstream asic. This error may cause performance degradation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-5-POLICY_EXECUTE_FAILED
### Response:
(Severity: 5), (Category: L2), (Description: CFM was unable to execute Bandwidth Notifications policies due to an error from Embedded Event Manager. Future Bandwidth Notifications will attempt to be published, but the affected policies may become out of sync.), (Recommended Action: If the error persists, it may be cleared by restarting the cfmd process on the node where the error is occurring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set up RSVP authentication in Cisco IOS XR?
### Response:
To set up RSVP authentication, use the 'rsvp authentication' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp authentication key-chain myKeyChain
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INCOMPATIBLE_RP_FOR_CHASSIS_RELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This RSP type is not supported by this chassis of ASR9K family. Shelf manager detected an incompatible RSP and has rebooted it.), (Recommended Action: Please remove this RSP from the chassis and replace it with another RSP type which is supported by the chassis according to the Cisco user documentation. If you have any question, please contact your Cisco technical representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_OOB_ERROR_LANE_INDICATE_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_OPTICAL_PWR_LOSS
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_1_OFLOW_FIA2BR_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-1 FIA to bridge instance-3 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-MEMORY_RECOVERY_DISABLED
### Response:
(Severity: 6), (Category: HA), (Description: This node is not configured with sufficient memory to enable memory recovery support.), (Recommended Action: Re-configure this node with more physical memory)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SP_NOT_ZERO_0_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Non-zero seg profile detected on xaui-0 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-GET_MY_NODEID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Node ID look-up failed. Packet path initialization at RP errored.), (Recommended Action: Restart the spio_ma process. 'process restart spio_ma location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_0_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-6-OPTICS_NOT_PRESENT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Optics not present/detected in port), (Recommended Action: If possible, please check if optics is physically present in port. If present but still not detected, remove and reinsert it to see if it gets detected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_TXM-7-DEBUG_NETIO_INIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ECM_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD daemaon was unable to create an ecm. Recovery occurs with automatic process restart.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T3E3-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified T3E3 Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_EES_REQ
### Response:
(Severity: 3), (Category: FABRIC), (Description: This can happen when EES request id's are wrapped or some other issue with request id's.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-CLINFO_HOLD
### Response:
(Severity: 3), (Category: OS), (Description: Failed to hold the client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_PROCESS_STOP
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when trying to stop the process specified in the error message. As a result, the process may still be running, which could adversely affect the operation of other processes.), (Recommended Action: Check whether the process is still running using the 'show process bgp location all' or 'show process brib location all' command as appropriate. If the process is running, kill it using the 'process kill' command. If problems persist, copy this error message and any subsequent ones exactly as they appear on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the lsp-gen-interval command in IS-IS?
### Response:
The lsp-gen-interval command is used to configure the minimum interval between generation of LSPs. By default, the LSP generation interval is 5 seconds. This command helps to throttle LSP generation during periods of instability to reduce the CPU and bandwidth overhead of flooding LSPs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIRROR-3-CREATETHREAD
### Response:
(Severity: 3), (Category: MGBL), (Description: 'pthread_create() API failed due to mentioned error'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPPHA-3-FAULTRATE
### Response:
(Severity: 3), (Category: L2), (Description: A CPP HA fault has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-ONLY_CONTEXT
### Response:
(Severity: 6), (Category: OS), (Description: This is because of the configuration of process core options. The core for the process has turned off delibrately), (Recommended Action: This is an informational message.Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-BPDU_DROPPED
### Response:
(Severity: 3), (Category: L2), (Description: A BPDU has been received which STP is unable to read.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-MESSAGE_SIZE
### Response:
(Severity: 3), (Category: MGBL), (Description: This stats manager handled a message which didn't meet the expected size requirements.), (Recommended Action: Some statistics related to the specified collector may be lost. There is no other detrimental effect. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_EA-3-INVALID_OBJECT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB EA layer. Typically, this is an invalid object passed to the functions. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show logging show running-config show cli history detail loc <> </RP> <LC> </LC> <TECH> show tech-support location <> show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-6-IMDR_STATE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The MBI hello process received the indicated IMDR state from the sysmgr process. This state change will be communicated to the shelfmgr.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-CDMA_RAM_CORRECTABLE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Indicates a correctable single-bit error occurred on this internal SRAM. The error is corrected transparently. The location will be written automatically before being read again. %s - name of ram that error occurred %x - key of error node recorded %s - error data), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TURBOBOOT-7-DUAL_DEVICE_INIT_SPEC
### Response:
(Severity: 7), (Category: INSTALL), (Description: The TURBOBOOT setting in ROMMON had both the device CLEAN and FORMAT options enabled. This setting is ignored and no device initialization would be performed.), (Recommended Action: CLEAN and FORMAT TURBOBOOT rommon variable options are mutually exclusive. It is incorrect to set both the options together. Set either one of them with respect to the desired action and retry.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-FAILED_PKG_DOWNLOAD
### Response:
(Severity: 3), (Category: INSTALL), (Description: Insthelper was unable to download the package. The node may come up as a dSDRSC successfully without this package (only possible if the package is not an active package) in which case this package will not be present on that SDR, and should be added if required.), (Recommended Action: If the node does not come up then this node will not be usable and will be reloaded automatically to recover. If it does not recover, then the missing package should be added to the router using 'install add' in admin mode so that it is available to be synced, or alternatively the missing package can be removed from the router using 'install remove' in admin mode so that it is not required to be synced. If the node does come up as the dSDRSC then check the packages present on the SDR/router using 'show install package all brief' and add any missing packages to the SDR/router as required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SKT_ECTW_RDATA_TO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-3-INVALID_ADDR_FAMILY
### Response:
(Severity: 3), (Category: IP), (Description: 'The api has returned invalid address family'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-7-INTERNAL_ERROR
### Response:
(Severity: 7), (Category: SNMP), (Description: Failed to initialize a functionality for snmp - like debugging, setup event manager for notification timer. Or failed to send PDU since the outgoing PDU is greater than the configured maximum PDU size, the PDU will be dropped. This could be due to an internal software error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-INCORRECT_IDB
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: EINT was supplied with a plim interface that does not have an idb yet.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT_SHOW-7-GROUP_CALLOC
### Response:
(Severity: 7), (Category: OS), (Description: The show decode helper library isolates string trace data into group keyed by trace name and nodeid. The library was unable to obtain memory for one of this group items. Because of this, the library will not be able to print out data from the given trace name/node grouping.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_MBI_HB_TIMEOUT_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card is being reset because of a failure to get MBI heartbeat from a specific node. This is an indication of an error condition during MBI BOOTING state.), (Recommended Action: Try to perform 'hw-module location <node> reload' command to the affected nodes to recover from the failure. Collect the output of 'show tech-support install', 'show tech-support shelfmgr', 'show tech-support control-ethernet' and log files under the harddisk:/bcm-logger/ (under last couple of sub-directory) before contacting Cisco for technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-LIBENS_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA ENS lib has an access error), (Recommended Action: Report the error)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Authentication, Authorization, and Accounting (AAA) framework in Cisco IOS XR?
### Response:
The AAA framework in Cisco IOS XR provides a set of security features for authenticating users, authorizing commands, and accounting for resource usage, enhancing network security and management.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Crossbar driver Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-OPERATION_ABORT_PARTITION_PREP
### Response:
(Severity: 1), (Category: INSTALL), (Description: A potentially fatal error occured when trying to prepare the new root disk partitions. There is no way a reliable Quickstart operation can be done with root partition creation failure and hence aborted.), (Recommended Action: The reason for this Quickstart operation failure has to be analyzed. Check the Quickstart operation log by 'show tech-support install' to understand the reason for the operation abort. Collect the show tech logs by running 'show tech-support qs' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSP1_PAR_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Local Bus RSP 1 parity error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-GET_PROC_ROLE
### Response:
(Severity: 3), (Category: OS), (Description: Failed to get the node state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-1-ABORT_WARM_RELOAD
### Response:
(Severity: 1), (Category: OS), (Description: Attempt to Warm Reload the card has failed. The syslog events logged preceeding this event would indicate the reason for the failure to warm reload the card.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-5-ROLE_SLAVE
### Response:
(Severity: 5), (Category: INFRA), (Description: The SERG role from the concerned group has change to SLAVE from either MASTER or uninitialized role. This is a normal redundancy event.), (Recommended Action: None required if there has been any network event or administrative action that caused this redundancy role change. Session status may be checked on the master and slave routers to verify consistency, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: These are unexpected errors), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
scripts-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-7-CONNECT
### Response:
(Severity: 7), (Category: OS), (Description: Unable connect() to a domain socket.), (Recommended Action: This message is for debug purpose only. Error code will be returned to caller for proper handling.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-EDM_SYSDB_REG_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Since the registration failed, the EDM initialization for tftpserver will be failed. System will continue to funtion and will come up.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_CHASSIS_QOS_STATS_CFG_CHANGED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Also, after reload additional hardware resources might be needed which would invalidate the configuration. Needs attention with removing queuing configurtion and reloading the chassis.), (Recommended Action: System is inconsistent. Need to reload chassis for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-PRM_INIT_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature EA DLL encountered error in completing PRM init operation. This can lead to malfunction or restart of pfilter ea process.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-7-ERR_LTRACE_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID Allocator could not open the annunciated ltrace buffer. The FGID component and the system should function as normal, with the exception that ltrace will not be available for fgid_aggregator process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-INVALID_FGID_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to retrieve record due to invalid FGID provided to the function. This will impact join/removal of FGIDs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-MSGREPLYFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server failed to reply to a client's request. This will result in the client getting blocked on packet server.), (Recommended Action: Restart the specified client. If the problem is not rectified, contact customer support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-7-ERR_FSM
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A bad or incomplete frame was received on the node given in the msg. If the messages are not persistent the condition is harmless and no action is required. If the messages are constantly seen, contact tech support with the output of the given command.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet location <loc in msg> detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet location <loc in msg> detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR
### Response:
(Severity: 5), (Category: PLATFORM), (Description: An ASIC error has occured and been handled.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-MSG_SIZE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_BMADJ-3-ERR_INFO_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM BMADJ, error information), (Recommended Action: Please collect the console log, bundle traces (show bundle trace loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-4-UNSUPPORTED_API
### Response:
(Severity: 4), (Category: OS), (Description: The call is not supported by OBFL infra.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-LINECARD_RELOAD
### Response:
(Severity: 3), (Category: INFRA), (Description: 'Incompatible PON'), (Recommended Action: 'Wait for the card to come up')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDP-7-SYSDB_INIT
### Response:
(Severity: 7), (Category: IP), (Description: An software error occured when the UDP process try to do initialization related with sysdb process.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KEYCHAIN-3-DEBUG_INIT_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system could not start the debug event. Hence the debug event could not be created.), (Recommended Action: If the message recurs, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show key chain trace client <clientname> both<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show key chain trace client <clientname> both<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-NBR_RESERVED_CONFIG
### Response:
(Severity: 4), (Category: ROUTING), (Description: PIM DR priority value advertised is reserved for Sticky DR configuration), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-TUPLE_NULL_ON_SUCCESS
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-TCP_NODELAY
### Response:
(Severity: 6), (Category: IP), (Description: Nagle's algorithm was not disabled; there is a small chance the telnet session will appear jerky. Telnet will otherwise function normally.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The router can continue to be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TEMPERATURE_ALARM-3-DIE_OVERTEMP_MAJOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: LC on die temperature sensor is risen above or fallen below major threshold.), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TTI_MISMATCH_DEMB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-TUPLE_PACK
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-PFM_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PFM module issue. Message string details the exact issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh processes vic location <> - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_TS_CORE_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-0 timestamp core error on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-FILE_READ_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occured while reading the file, this might be program level issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-UNEXPECTED_OAMPDU_RECEIVED
### Response:
(Severity: 4), (Category: L2), (Description: The Ethernet Link OAM Daemon received an OAMPDU on an interface that was not configured with Ethernet Link OAM. The OAMPDU has been ignored. This message is harmless.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-CALL_DLL_DISABLE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: When 'vpdn' configuration is removed, the VPDN CALL infra uninitializes in client processes, namely PPP-MA. Something has failed in this process any may contribute to leaked resources. In some cases, this warning message may be harmless.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-PUNT_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: One of the possible cause for this message could be denial-of-service attack.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-NSR_TCP_MSG_TX_NOT_ALLOWED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Standby Node tried to transmit LDP message which is not allowed as per architecture.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-FSDB_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: SFE driver failed connection with FSDB due to the above reason), (Recommended Action: The driver will disconnect and try reconnecting If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_INARP-3-VCCLASS_IDB
### Response:
(Severity: 3), (Category: L2), (Description: A set of IDBs are kept with information on each FR interface. A set of VC-CLASSes are also kept and associated with the IDBs. Somehow this information has become inconsistent.), (Recommended Action: Restart the main process (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_1_FIA_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error - 1 from FIA on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-2-ERR_STS
### Response:
(Severity: 2), (Category: L2), (Description: Error in gatm operation. The error message denotes the gatm operation being unsuccessful with a particular return code. The return code has been used to signify the reason of the failed gatm operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-FPGA_POWER_FAULT
### Response:
(Severity: 1), (Category: FABRIC), (Description: Fabric card has power fault on CPLD ASIC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDT-3-PLUGIN_INIT_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Model driven telemetry data plugin initialization has failed.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-ADMIN_CONFIG_INIT_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialization of admin config cli auto-save commit verifier failed.), (Recommended Action: Collect show logging output and any other suspicious error messages on console and inform technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_13_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OLM-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal system error occurred.), (Recommended Action: Please provide the output of the LMP trace to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered in debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPABRG-3-HW_FAILURE1
### Response:
(Severity: 3), (Category: L2), (Description: Marmot spabrg driver error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-7-CAPS_ADD_FAIL
### Response:
(Severity: 7), (Category: ROUTING), (Description: CLNS failed to add caps to its encapsulation chain. It's an internal error.), (Recommended Action: Please contact cisco-support with the required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APM-5-POWER_SAVING_COMPLETE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: When the Slice power-saving operation is complete, user is notified So, other configurations/operations to be made on LC can be resumed.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLL-5-UPGRADE_SUCCESSFUL
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The firmware upgarade on the specified PLL succeeded. No further action is necessary from the user.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-3-INTERFACE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error occurs due to failure in creating the interface.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SYSDB_MC_MSG_SIZE_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering for sysdb_mc msg size stats failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK bias greater than or equal to the high bias alarm threshold. The CPAK is the pluggable optics on the line cards. The bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-4-SHUTDOWN
### Response:
(Severity: 4), (Category: ROUTING), (Description: TE process has encountered a problem which means it is no longer able to continue and is shutting down. The message includes a brief description of the problem. The message also describes whether or not TE process has automatically been restarted.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Follow the instructions associated with this message. If message states that an automatic restart has been scheduled, then TE process will recover automatically. If a manual restart is required, then 'process start te_control' is required to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-MSG_REPLY
### Response:
(Severity: 3), (Category: OS), (Description: Failed to get the reply.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-SPUR_INTR_MASK
### Response:
(Severity: 3), (Category: FABRIC), (Description: An interrupt is generated but the interrupt status register indicates no pending interrupts. This may be due to a hardware error where the interrupt line is stuck in its active state. Masking the interrupt propagation from the corresponding POD device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_REGISTER
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver subsystem initialization error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-TX_CH_HI_PWR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high power on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption in the downstream.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-UNKNOWN_MEDIA
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified interface media is not supported by CLNS. This means that IS-IS and other CLNS protocols cannot run over the specified interface. This is an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. As a workaround consider using a different encapsulation for the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-6-ACCESS_PW_DEFAULT_SHG_MODULAR_FRETTA
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Access PW without split horizon configuration is not supported on modular NCS 5500), (Recommended Action: Unconfigure such access PW or configure this access PW in SHG.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-ATTACH_HANDLER_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to attach corehelper message handler .), (Recommended Action: Failed to attach message handler will prevent message from being received by the application. Check corehelper process, collect console logs, show context. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-6-FRR_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information message in the ASR9K platform IP FRR FIB specific code software. The message is for debug purposes only and not an error.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-6-MAP_SERVER_EID_PREFIX_RLOC_REACHABILITY_CHANGE
### Response:
(Severity: 6), (Category: IP), (Description: 'RLOC for the given EID prefix is down so traffic will ' 'not get encapsulated to it.'), (Recommended Action: 'Check the ETR registering this RLOC for this ' 'prefix to diagnose why it's down.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-GN2412_LINK_DOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link on GN2412 device is down), (Recommended Action: '*show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-MESSAGE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A message was received and did not match any outstanding requests and also is not a standalone message. This is not a critical failure, the process can continue functioning as expected despite the message arrival, message is discarded.), (Recommended Action: If this appears once or infrequently, it is not necessary to contact TAC. If it appears continuously or comes and goes repeatedly, it is best to please collect the following details and contact TAC. Provide the following CLI output: (admin)# show canb server-stats loc all (admin)# show canb trace loc <target nodeid> (admin)# debug canb server error loc <target nodeid> Let the debug run 2 minutes (admin)# undebug canb server error loc <target nodeid> (admin)# show canb trace loc <target nodeid> (admin)# show canb server-stats loc all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-4-SYNC_ERROR
### Response:
(Severity: 4), (Category: INFRA), (Description: The requested sync of sessions could not be done due to specified error. Operation can be retried after error condition is resolved. This is in response to the synchronize CLI exec command.), (Recommended Action: None required since this is in response to an administrative action that caused this synchronization of sessions. Operation can be retried and troubleshooting required if error persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-7-GENERIC_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A generic error occurred in Services CGV6 SERVICE. Cause of the error will be mentioned in the message displayed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCT_STOP_REC_FILE_READ_FAILED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when acct stop rec read from file failed.), (Recommended Action: Check the harddisk space. Try disable and then enabling the accounting stop storage feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-6-DCD_LOST
### Response:
(Severity: 6), (Category: MGBL), (Description: The RS232 driver lost Data Carrier Detect signal. Process will close existing session.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-FD_MIN_LIM
### Response:
(Severity: 4), (Category: HA), (Description: A process is potentially leaking FDs. Minor limit has been crossed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_ENA-7-TCP_UNKNOWN
### Response:
(Severity: 7), (Category: MGBL), (Description: TCP accept call failed, the HTTP server can't function.), (Recommended Action: No action is required. The server will continue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_COMMS-3-MY_ID_MISMATCH
### Response:
(Severity: 3), (Category: L2), (Description: The Checkpoint table contained unexpected data. This is unexpected, and could indicate memory corruption of some sort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_36
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVDPMEM-7-NO_MATCHING_STRING
### Response:
(Severity: 7), (Category: OS), (Description: Unable to read reserved physical memory for a given memory infra-structure. There can be a case when there is no support for that infra-structure on platform. Details are provided with the error message. Call support with this error message text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-7-FABRIC_ADDR_INFO
### Response:
(Severity: 7), (Category: OS), (Description: Could not get the fabric address corresponding to the nodeid %x- error code %s- Error description %x - node id), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-FAILED_REMOVE_IGNORE_COMMIT_LDPATH_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: An attempt to remove the ignore commit ldpath file failed. This could be due to a file system error. The result of this failure is that committed install information will not be interpreted correctly.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-INVALID_TAG
### Response:
(Severity: 3), (Category: LICENSE), (Description: 'The tag is not defined in the Cisco Smart Software Manager.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_SVR-3-INTERNAL
### Response:
(Severity: 3), (Category: L2), (Description: The process acct_svr encountered an internal error. The process is exiting and will be restarted. System will not be affected.), (Recommended Action: show accounting trace location X/X/X)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ip' command in Cisco IOS XR?
### Response:
The 'mpls ip' command enables MPLS forwarding on an interface. It is required for an interface to participate in MPLS forwarding and to be used as an endpoint for MPLS TE tunnels or L2VPN pseudowires. This command is typically configured on core-facing interfaces of PE routers and on interfaces of P routers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-READERR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to function read failed. The error message is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_PKT_F0_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 0 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to bind a pseudowire class to an xconnect group?
### Response:
To bind a pseudowire class to an xconnect group, use the 'xconnect' command within the interface configuration mode, specifying the peer address, VC ID, and pseudowire class. interface GigabitEthernet0/0/0
xconnect 10.1.1.2 100 encapsulation mpls pw-class PW-CLASS-NAME
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OT-4-WARNING
### Response:
(Severity: 4), (Category: SERVICES), (Description: Internal Warning.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY-4-DEBUGINIT
### Response:
(Severity: 4), (Category: OS), (Description: The filecopy_process was unable to register for debug notifications. If you have turned on debugging for this process, it will have no effect. However, the rest of the filecopy_process functionality should still be available.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-2-PRODUCER_INIT
### Response:
(Severity: 2), (Category: MGBL), (Description: A failure occurred during the initialization of ENS library or during NRS class creation. This probably indicates an underlying more severe problem.Internal failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-4-SVC_AGENT_ROM_DOWN_REV
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The version of Mbus agent ROM on slot is not current. %d - is the slot number of the card in question. %d - is the major version of the agent currently in ROM %d - is the minor version of the agent currently in ROM %d - is the major version of the agent that is recommeneded %d - is the minor version of the agent that is recommeneded), (Recommended Action: Upgrade the rom agent on the car in the specified slot. In admin mode issue the following command upgrade mbus location 0/<slot>/cpu0 where <slot> is the number of the slot shown in the warning message)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-REDIST_REG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred on a request to have the RIB send us route updates for the specified type of routes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAIPC_NETIO-7-BASE_BAD_CHAIN_TYPE
### Response:
(Severity: 7), (Category: OS), (Description: qnetbase_builder_func() called with bad chain type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-INSTALL_OP_SYS_ERR_GLOBAL_NODES_INCONSISTENT
### Response:
(Severity: 2), (Category: INSTALL), (Description: A system error occurred during an install operation. This may indicate a transitive problem within the system, a problem with the code or a user error not verified by the install system. The system does not know what software is running on the specified nodes and it may be the case that the software on the nodes cannot operate correctly within its own node or with other nodes in the system.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repiar' if anomalies are found. If incorrect behavior is seen then restart processes impacted by the install on the inconsistent nodes (use 'show install log <install ID> detail' for a list of impacted processes). Collect diagnostic information about the failure using the 'show tech-support install' command and pass it to your TAC representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_CONST_BP_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NPU-1 is constantly backpressuring bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_UIDB-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A run time error occurred during the pidb operation on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-3-EXIT_PROCESS
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fia config failed to create/init essential component. The driver will be non-operational due to this error.), (Recommended Action: The Proxy will recover by restarting. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-6-PPU_NOT_REQUIRED
### Response:
(Severity: 6), (Category: FABRIC), (Description: FSDB aggregator skipped PPU steps, PPU need not reload FC cards), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-FILE_OPEN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-ASYNC_GET_BFR_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Failed in getting a buffer from TX mem pool of ETH_SERVER for client's usage . This could lead to failure in sending the data over the control ethernet to a remote node.), (Recommended Action: If message appears only once, then no action is required. Packets will be retransmitted and system should recover automatically. If message appears continuously, then it could indicate a problem with the control-ethernet. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR handle interface virtualization?
### Response:
Cisco IOS XR supports interface virtualization through the use of Logical Interfaces (LIFs), allowing for the partitioning of physical interfaces into multiple virtual interfaces to support different services or traffic types.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE_STAT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RSP_OCXO_FAILURE_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Clock derived from OCXO is not proper. There could be instability in system due to bad clock received.), (Recommended Action: Contact Cisco-TAC for further investigation/recovery action)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PARTICLE_GIANT_POOL_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Giant pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-MISSING_CTX_PTR
### Response:
(Severity: 7), (Category: HA), (Description: During a re-registration, an internal context structure was not found. This is probably a coding error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_MPLS_EA-3-PARAM_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A parameter inconsistency has been detected in the MPLS Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESDMA-6-MLAP_CONN_FOUND
### Response:
(Severity: 6), (Category: INFRA), (Description: MLAP on the given location is reachable. Hence connection between MLAP and ESDMA has been found.), (Recommended Action: Check on the MLAP process in the given location)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-6-ERR_2_PARAM
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with two prameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-2-CAL_CHIP_MAP_FAIL
### Response:
(Severity: 2), (Category: MGBL), (Description: Unable to map calendar chip.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-CHILD_TERMINATED
### Response:
(Severity: 3), (Category: IP), (Description: rlogin client application's child process terminated abnormally.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VASI_EA-3-SSC_SEND
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a batch of messages to the Service Director. The Service Director may not be up to date with the state of services on this node, so VASI interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the VASI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-NSF_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred in MRIB NSF.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-2-EOBC_HB_FAILURE_LOWER_HALF
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Active RP is not getting heartbeat responses from LCs in the lower half of the chassis. This is very likely to be an issue with the retimer chip hardware on the Active RP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMAP_PEER-3-RECV_SIZE
### Response:
(Severity: 3), (Category: OS), (Description: The recv() has unexpected message size.), (Recommended Action: Copy the message exactly as it appears, and report it your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_UPGRADE_FPD-7-SW_ERR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The PLIM FPD upgrade is failed due to an internal software problem. %s - indicates the stage where the failure happens. %s - indicates the reason for the the failure.), (Recommended Action: Check if the linecard reported any other errors as this internal software error is normally associated with larger system issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-4-RATE_LIMIT_EXCEEDED
### Response:
(Severity: 4), (Category: IP), (Description: The error occurs when DHCV6D control packet rate exceeds the configured limit or the default vaules 500 CPS.), (Recommended Action: Control the DHCPV6 rate)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-NODE_ISOLATION_ABORTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message indicates that node isolation is aborted.), (Recommended Action: *none*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STATS_INFRA-3-ERR_PID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred since stats infra process is running already.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_PM-3-POLICE_GRAN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The LC needs to be reloaded, or the policy has to be reapplied for the configured qos police granularity to be effective.), (Recommended Action: Exit the Config-terminal. Reload the Linecard using 'hw-module location <loc> reload' option. Reapply the MQC policy on all interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SM-4-INTERNAL
### Response:
(Severity: 4), (Category: INSTALL), (Description: This self-managing component reached an unexpected state, and was unable to proceed with the requested operation.), (Recommended Action: This internal error will be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP5
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-5-SINGLE_FEED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: 'Single feed mode configuration changed, if enabled no warnings will be generated if one DC module feed is not connected or voltage is out of range. Globally enabled configuration overrides per module configuration'), (Recommended Action: Informational, no action needs to be taken)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-GET_PAGEDATA_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Dumper collects all the process related data by using system call devctl. If a devctl fails, then the core file will be incomplete. This will not impact the system.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-NVRAM_WRITE
### Response:
(Severity: 4), (Category: MEDIA), (Description: The access to the nvram failed, so that format operation was rejected.), (Recommended Action: Please collect syslog information. Please retry.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS_IP_ORA-3-INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal software error in the routing policy library and as a result routing policy may not be applied correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'Generic Errors'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-INTERRUPT_MASK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver has been unable to mask the UART interrupt.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-6-CHKPT_CLIENT_NOTIF
### Response:
(Severity: 6), (Category: OS), (Description: Status information while checkpointing the client notifications.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CCI_TIMER
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred while starting or restarting the CCM generation timer. No further CCM messages will be sent for MEPs in this domain/service.), (Recommended Action: Unconfigure CCM generation for this service, commit the configuration, then reconfigure it. If the problem persists, it may be possible to recover by restarting the 'cfmd' process on the node where the problem occurs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_CLIENT_LOGIN
### Response:
(Severity: 6), (Category: SECURITY), (Description: SSH client established connection.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_6_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-4-RED_STATE_ERR
### Response:
(Severity: 4), (Category: SERVICES), (Description: An error has occurred during the handling of a notification from Sysmgr indicating a change in the redundancy state of the card indicated (e.g. from standby to online).), (Recommended Action: Restarting RSPP MA may solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-3-GROUP_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The rpl multi-version coordinator was unable to create the group services group that is required to coordinate with other route policy entities. The coordinator will exit to allow the system manager to restart it. Route policy may not be operational until this is resolved.), (Recommended Action: This error message may be transient. Restart policy_repository and try the use case again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-MSG_ENQUEUE_ISSUE
### Response:
(Severity: 3), (Category: OS), (Description: GSP client process is either blocked or is slow to pick up the messages intended for itself. This leads to build up of GSP queue and eventually leads to messages being dropped for this process.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-3-LOCK_NOT_RECOVERABLE
### Response:
(Severity: 3), (Category: L2), (Description: Failed to make the mutex in consistent state results in not recoverable state.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_IPC-6-SW_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: An internal software debug SIM IPC Service Engine.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you troubleshoot configuration inconsistencies in IOS XR?
### Response:
To troubleshoot configuration inconsistencies in IOS XR, you can use commands like 'show configuration failed' to view any configuration that failed to apply, and 'show configuration inconsistency' to identify mismatches between the running configuration and SDR-specific configurations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-BOARD_POWERUP_FAIL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-7-SYSCALL
### Response:
(Severity: 7), (Category: OS), (Description: A system call failed. The calling function, the failed call, and error are displayed.), (Recommended Action: Collect the system logs and show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-TBLATTR_UNLOCK_MISMATCH_TBLCTX
### Response:
(Severity: 5), (Category: ROUTING), (Description: A warning was encountered during some operation for tblattr for a table context. The table context passed in is not same as the table context under which the tblattr is created. Normally this message will not cause any issue. In rarely case it might. The message is added for debug purpose only to help the DE to find such cases.), (Recommended Action: Please include the output of the following commands: - show logging - show dll jobid <bgp jobid> - get bgp running core file. - show bgp trace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-2-SDR_RELOAD_FOR_BIV_RECOVERY
### Response:
(Severity: 2), (Category: INSTALL), (Description: This may not be a failure, but an information to the user that the sdr will reload as there has been a BIV failure and needs a sdr reimage. This will result in a sdr reload.), (Recommended Action: Collect show tech-support install logs for all the nodes on XR and sysadmin)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SECURE_VAULT-3-CORE_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The Secure Vault process has encountered error in its core elements.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOS_PORTU
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-READ_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Most probably some problem with the procfs file system), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-6-VPNV4_CONTEXT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message is for recording VPNv4 global context intialization event. No action is required.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-IOFPGA_BOARD_SHUT
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has received an interrupt from IOFPGA board and this interrupt will cause the whole system to shut down. When system goes down then user needs to power cycle the system to bring it up.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-3-OP_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: A critial operation attempted by QoS MA has failed. It may affect the proper functioning of QoS features.), (Recommended Action: Contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-6-RSVP_HELLO_STATE_DOWN
### Response:
(Severity: 6), (Category: ROUTING), (Description: The RSVP Graceful Restart Hello session with a neighbor has gone down. This may be due to either a problem in the communication link with the neighbor or the neighbor's RSVP control plane may be restarting.), (Recommended Action: If RSVP hello communication is not re-established within the neighbor's Restart Time, RSVP states will be deleted. You may wish to determine if there is a communication problem with the neighbour, or if the neighbour's RSVP control plane has restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_3_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_svr-2-USAGE
### Response:
(Severity: 2), (Category: OS), (Description: Incorrect command line parameters were passed to the cds proxy, and so it failed to start.), (Recommended Action: Check the startup arguments passed to nrs server. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPT-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPT info message. %s- Info message.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-IMDR_INFO
### Response:
(Severity: 6), (Category: L2), (Description: PLA driver informational message during iMDR procedure.), (Recommended Action: None, the message is for info only If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM_API-4-PTCL_TYPE_WRONG
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: BFM encountered a warning condition), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-3-IF_NOTIF_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: An invalid interface notification was received from one of the servers.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-INSUFFICIENT_BUFFER_SIZE
### Response:
(Severity: 3), (Category: SECURITY), (Description: A buffer is required in order to fill a certain data but the buffer size was too small.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different types of regular expressions used in BGP filtering?
### Response:
The main regular expression types used in BGP filtering are\n- Asterisk (*) - Matches any single character\n- Period (.) - Matches any single character\n- Plus (+) - Matches one or more occurrences of the previous character\n- Question mark (?) - Matches zero or one occurrence of the previous character\n- Caret (^) - Matches the beginning of the input string\n- Dollar sign ($) - Matches the end of the input string\n- Underscore (_) - Matches a comma, left brace, right brace, left parenthesis, right parenthesis, the beginning of the input string, the end of the input string, or a space\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-6-MEM_TRACE_BLOCK
### Response:
(Severity: 6), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-FAILEDREGCOMP
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The regcomp function failed for some reason. This may lead to NVGEN errors.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-I2C_WRITE_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error occured while writing to I2C device. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC_SVI_EA-3-SSC_SEND
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a batch of messages to the Service Director. The Service Director may not be up to date with the state of services on this node, so IPSec SVI interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the IPSec SVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-PM_CONNECT_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: ESD to PM connection failed. ESD process will restart after this fatal error.), (Recommended Action: If this problem does not recur, no intervention is required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_NETIO-3-CARD_DLL
### Response:
(Severity: 3), (Category: L2), (Description: Card specific dll may not be present. Due to the above reason, this message will be flashed while setting up the NetIO chain elements.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_L2TP-7-LTRACE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB L2TP component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_1_FC_OOS_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-1 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CPT_DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PHY controller driver version is not compatible with PHY controller hardware version.), (Recommended Action: Upgrade the PHY controller CPLD image using the FPD procedure, followed by reloading the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-IM_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-6-VIRTUAL_IP_CHKPT_UPDATE
### Response:
(Severity: 6), (Category: INFRA), (Description: Virtual IP addresses known to kim are stored in a Checkpoint database, so that on process restart, kim is able to remove any virtual IP addresses that may have been removed while kim was not running. If Checkpoint updates fail, then after process restart the SMIAP database will be restored with stale data. In this scenario, kim would be unable to clear stale addresses from Linux.), (Recommended Action: No action should be required. Stale addresses on Linux lo:virtual-ip interfaces that do not correspond to a virtual IP configured in XR can be removed, if desired.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_CARD_SES_LIMIT_NOT_REACHED
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on the card is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-6-INV_TRACE_BUFF_INIT_FAILED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Ltrace initialization failed within INV. Ltraces may not be printed.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-LOGIN_ECM_CONN_SYSDB_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Generic error message used for internal debugging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-MEM_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-DISK_UNMONITOR
### Response:
(Severity: 6), (Category: HA), (Description: Wdsysmon has been told to stop monitoring the indicated device, even though the disk is above 90% utilization.), (Recommended Action: If the disk is used for critical tasks, monitor the disk usage and take corrective action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_TP_NETIO-3-DEBUG_GET_EVM_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Teleport Netio DLL failed to get the event manager handle from netio to register with debug system. This resulted in the restart of NetIO process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FILECOPY-3-SYSDBBIND
### Response:
(Severity: 3), (Category: OS), (Description: The filecopy_process was unable to bind with sysdb. This means the process will be unable to communicate with its clients. Hence the filecopy_process will shut itself down.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-EVPN_INVALID_IMPORT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The EVPN IP Prefix route is imported to IP VRF, EVPN MAC route with two labels are imported to IP VRF as well as to L2 VRF or Bridge Domain, all other EVPN routes are imported only to L2VRF or Bridge Domain.), (Recommended Action: Make sure the EVPN route received has the correct format and import EXTCOMMs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-2-ERR_CHAIN
### Response:
(Severity: 2), (Category: L2), (Description: unsupported configuration), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_DPM-6-DISCOVERY_HEARTBEAT_LOST
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The Discovery protocol requires a response to every heartbeat packet that is sent out. If the specified number of heartbeats are missed, then the connection data to the satellite is cleared and the session has to be re-established.), (Recommended Action: If making transport layer changes or re-configuring the satellite, then this syslog is probably expected and purely informational, so no further action is required. If unexpected, then check the transport layer between the host and the satellite and ensure that the satellite is working as expected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-MEMBER_AIB_REMOVE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to remove entry from adjacency information base.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-INCORRECTPARS
### Response:
(Severity: 4), (Category: ROUTING), (Description: An externally accessible function has been called with illegal parameter(s). the parameter(s) has been casted to an acceptable value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_GLOBAL_BSR_CRP_THRESHOLD_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the valid values for the BGP origin attribute?
### Response:
The origin attribute indicates how BGP learned about a particular route. The valid values are\n- IGP (i) - Route originated from BGP network statement\n- EGP (e) - Route originated from EGP\n- Incomplete (?) - Route originated from redistribution\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-CORRUPTION
### Response:
(Severity: 7), (Category: HA), (Description: The process crashed during CDM heap modification, resulting in an unrecoverable heap. Process will be started from an empty heap.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the three planes that Cisco IOS XR uses to secure access to the router?
### Response:
Cisco IOS XR uses three planes to secure access: 1) The admin plane which has full access to the entire router. 2) The SDR plane which has access to resources and configurations within a Secure Domain Router. 3) The management plane which has access to individual command-line interfaces.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-BUFFER
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The command buffer is invalid. The calling function is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-FILE_SIZE_CHANGE
### Response:
(Severity: 7), (Category: OS), (Description: The operation to change the file size failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-ERRRCV
### Response:
(Severity: 4), (Category: ROUTING), (Description: An invalid OSPFv3 packet was received. Details are included in the error message. The cause might be a misconfigured OSPFv3 or an internal error in the sender.), (Recommended Action: Check the OSPFv3 configuration of the receiver and the sender for inconsistency. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPI4_CNTRL
### Response:
(Severity: 4), (Category: L2), (Description: Failed enable/disable specified SPI4 link), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. before reloading the line card If this problem persists, reload the line card using <CmdBold>hw-module location <>/<>/CPU0 reload<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_5_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-4-SESSION_IDS_EXHAUSTED
### Response:
(Severity: 4), (Category: L2), (Description: A very large number of loopback sessions have been started. All active sessions must be stopped before any more can be started.), (Recommended Action: If you need to start another session, either wait for all active sessions to stop naturally, or stop them manually. To stop a session manually, use the following command: - ethernet loopback stop local interface <name> id <id>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-3-SYS_MUTEXOP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: SHMWIN encountered an error condition with the shmwin global lock, the a mutex operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show logging - show shmwin trace all location 0/x/CPUx - dumpcore running <process name> location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does SysDB help achieve high availability in IOS XR?
### Response:
SysDB contributes to high availability in several ways\n- Config and persistent state are replicated between active and standby RPs\n- Processes can resynchronize their state from SysDB after a restart\n- Processes can register for notifications to detect config changes and operational state updates\n- Schema enforcement and config validation prevent invalid state from being propagated\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PFI-3-NODEID_EXT_FLDS_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Platform PFI was unable to extract fields from node id. The returned error code should indicate the reason for the failure of the api. This is a transient error in the system likely due to some config events. The client logging this error should retry the api and/or handle this error accordingly. If this error is seen persistently, Initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-BAD_MSGTYPE
### Response:
(Severity: 7), (Category: HA), (Description: The message type has the checkpoint component ID, but does not have a message type in the correct range. This is a situation which should never happen.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-ERR_INTERNAL
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred during an operation. The error could be related to socket, SysDb, idb or timers.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Action to be taken based on the cause of the error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ClkCtrl Driver encountered an initialization error.), (Recommended Action: Restart the process using the CLI in exec mode - process restart tempo If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-FILE_SIZE_GET_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: An OBFL file size can not be obtained from platform DB. This will impact the file size and coalesce functionality of OBFL as coalescing is based on file size.), (Recommended Action: collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_12_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TABLE_READ
### Response:
(Severity: 3), (Category: OS), (Description: Unable to read object from table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-RSI_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: CGN_MA failed to register with RSI for interface related notifications. The process will restart under this scenario.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-3-INITIALIZATION_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: An error was encountered while the process was trying to initialize.), (Recommended Action: The edpl_ma process should be restarted using the following command: - process restart edpl_ma)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-INVALID_BATCH_OPERATION
### Response:
(Severity: 3), (Category: ROUTING), (Description: A client sent a batch to RIB containing an invalid op code.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-OIR_ERROR
### Response:
(Severity: 5), (Category: L2), (Description: SPA related error as indicated in the msg), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_ISOLATION-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the requested node isolation action failed due to the specified error. The sysmgr will as a result not proceed with the isolation action prior to card reset and simply reset the card to recover.), (Recommended Action: Please collect the console logs and attach to the DDTS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ACCT_STOP_REC_NON_EMPTY_USED_LIST
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when acct stop rec feature is getting disabled and still some requests are in the queue.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_25
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt link failed), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-3-SYSDB_BIND_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Failed to connect to SysDB while starting the indicated subsystem.), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SCAN_PROCDATA_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Core dump failed because scanning the process data failed.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONAUX-3-AUX_REG_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ConAux Identity module has been unable to register the aux TTY.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-VIEWOID_NOT_FOUND
### Response:
(Severity: 4), (Category: SNMP), (Description: The snmpd process attempted to load the view OID, but the OID did not correspond to any known MIB module.), (Recommended Action: It could be that either - 1. the OID is of the format 'foobar.1', but the MIB module containing the OID 'foobar' is not yet loaded on the router. If this is the case, when the MIB is loaded, this command will be automatically applied - there is no need to re-enter it. 2. The MIB module containing the OID 'foobar' is indeed loaded, but the MIB did not load a translation from 'foobar' to '1.3.6.1.x.y.z' (i.e. there is no translation from the oid-name to the dotted decimal representation for that name). In this case, you can enter the dotted decimal version instead of the name, i.e. 'snmp-server view <viewname> 1.3.6.1.x.y.z included' - note that using the dotted decimal version of the name will ALWAYS succeed without a warning message - it is upto the user to make sure the OID entered is valid. 3. The OID 'foobar.1' contains a typo - please re-enter the command with the correct OID and it should succeed. If the above steps result in repeated warning messages or failure, please contact your customer support representative wit the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-TUNNEL_ERROR
### Response:
(Severity: 3), (Category: IP), (Description: A tunnel or an endpoint on the tunnel could not be created for this binding request.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-DSC_REG_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to failuer to register to DSC events . This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SYSDB_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SysDB operation error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-ERR_OPEN
### Response:
(Severity: 3), (Category: IP), (Description: An unexpected error occurred when TelnetD tried to open a VTY character special file.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GRID_NPD-7-ERR_INIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Initialization of grid NPD dll has failed due to one of the following reasons: 1) Failed to initialize GRID NPD .), (Recommended Action: No action is required. GRID Svr Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_DATALIST_NEXT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-6-PEERING
### Response:
(Severity: 6), (Category: L2), (Description: The UDLD session on the interface has established communications with a neighbor device.), (Recommended Action: None. This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_ABORT_PRECHECK_FAIL
### Response:
(Severity: 1), (Category: INSTALL), (Description: The ISSU operation has been aborted due to an error when completing ISSU related prechecks such as version compatibility and resource availability.), (Recommended Action: The cause of the precheck failure is indicated in the error message included in this syslog. This will typically indicate a system issue, which may be rectifiable by the user. If the cause of the issue is unclear from the error message then collect the output of 'show tech-support issu' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-4-EXCEPTION
### Response:
(Severity: 4), (Category: OS), (Description: Exception, ie. file or directory does not exist.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-GET_MAPPING_INFO_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Dumper failed to get process related information resulting in core dump failure. The core dumping will be aborted.), (Recommended Action: Please restart the process. If the issue is seen even after restarting the process. Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE1_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE1_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_NH_ATTRIBUTE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured, a nexthop which is a RIB-only nexthop should not have path information but has.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS_MIB-3-ERR_BAG_DECODE
### Response:
(Severity: 3), (Category: OS), (Description: The agent was unable to decode the bag representing a trap event.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some of the key requirements for a carrier-grade network operating system?
### Response:
A carrier-grade NOS must enable network and service convergence, seamless scalability of the control, data and management planes, and high availability. It requires hardware redundancy, rapid failure recovery, process restartability, fast failure detection, hitless software upgrades and patching, security and service flexibility.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_2_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: SAM general error message with two prameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE4_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE4_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_NSF_MEDIA_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS has detected a mismatch between the media class (i.e. Point to Point vs. LAN) of an interface as determined by IS-IS's checkpoint state and IM. As a result the interface will not participate in the NSF restart. This is an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-IDP_INTENT_VER_UPDATED
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'The device received a new intent file ' 'by Intent Distribution Protocol'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-ARB_ECTW_RD_PERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-GET_FSLIST_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Most probably some problem with the file systems data file), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROMMON_BURNER-5-progress
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The rommon programmed successfully.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: OS), (Description: 'Initialization of Ltrace failed.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-APP_RECOVERY_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr was unable to recover an application after a reload or switchover event.), (Recommended Action: Inspect the error information and reactivate the application after addressing any issues. The error information can be displayed through the following command: <CmdBold>show appmgr application name <name> info detail<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_MACSEC-7-ERR_CONN_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to set up event connection.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_3_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_FC_OOS_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-MISMATCH
### Response:
(Severity: 4), (Category: MGBL), (Description: An unmatched ''' or '{' character was found part way through a token in a command string.), (Recommended Action: Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-SENSOR_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_DUPLICATE_INSTANCE_ID
### Response:
(Severity: 4), (Category: ROUTING), (Description: Duplicate Instance ID already configured by another isis process.), (Recommended Action: Try a different Instance ID value not used by any other isis processes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_15
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TIPCP-3-SW_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal software error has occurred in Turbo IPCP library), (Recommended Action: Provide the log details from the below command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - show controllers service-module tipcp <ISM>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-INIT_CONTEXT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates DSC failed to initialize the context from its shared memory . DSC exists the threads.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-3-INTF_CREATE_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Interflex Manager failed to completely clean up interface state after an interface creation failed. This will have left the system in an inconsistent state. The most likely reason for this error is memory exhaustion.), (Recommended Action: Look for ways to free up memory and restart the interflex_mgr process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-SHUTDOWN_ON_I2C_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that the node is being powered-down and moved to IN_RESET state due to occurence of specified I2C alarm on its board.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-4-OPERATION_QS_ABORT_DONE_REMINDER
### Response:
(Severity: 4), (Category: INSTALL), (Description: This message acts as a reminder that the system has been held following an abort to allow system level triage.), (Recommended Action: The system has been held following an abort to allow system level triage. When complete issue command <cmdBold>install activate fast cleanup<cmdBold> to enable another fast upgrade.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-6-UNSUPPORTED_XENPAK
### Response:
(Severity: 6), (Category: L2), (Description: The Xenpak inserted in the given interface is not supported on this PLIM.), (Recommended Action: Verify the Xenpak is supported in the hardware manuals)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-RED_STATE_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered during redundancy state transistion.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_FPOE_DB_CORR_ECC_ERROR_LNK3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast FPOE correctable ECC error on link 3), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LOW_TEMP_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an QSFP+ temperature less than or equal to the low temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_A9K_LC_SVI-3-UIDB_ERROR_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to obtain a micro-interface descriptor block index.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-3-DRV_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error detected when starting the i2c driver), (Recommended Action: None. Driver will exit and restart automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-MPA_MAC_NOT_CONFIGURED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message provides information about the MPA mac configuration. A typical reason is that MPA is not inserted properly.), (Recommended Action: Please try to remove and reinsert the MPA. If the problem still persists, collect console log and the following information. Contact your technical support representative. - sh platform - sh processes vic_<bay_id> location <> - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSPI_ASYNC_FIFO_H72_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TxSPI async FIFO high 72bits data multiple bits ECC error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-3-CTX_FREE_PAK_OWNERSHIP
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The identified client attempted to explicitly free the SPP context which is associated with pakman packet.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO-7-ERR_SEND_INGRESS_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Cannot send packet to qad queue, likely the qad queue is full and application does not drain the qad queue fast enough %s - error description %d - 0 ingressq; 1 egressq; 2 fabricq 0; 3 fabricq 1 %d - queue number %x - error code), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-7-FABQOS_SEND_FAILED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_0_XAUI_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from XAUI on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-LOG_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: dumper_edm and dumper_exception_edm failure. This will impact the behavior of the dumper.), (Recommended Action: Please contact support with the following data. show tech-support dumper)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-DIGEST_BK_INTEGRITY
### Response:
(Severity: 4), (Category: INSTALL), (Description: The digest backup file is found being tempered with, insthelper will discard the file, and all the packages will be copied again.), (Recommended Action: Install helper will automatically copy all the packages again. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does OSPF establish adjacencies between routers?
### Response:
OSPF routers dynamically discover their neighbors by sending Hello packets out each OSPF-enabled interface. If certain parameters in the Hello packets match between two routers, they will form an adjacency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-3-ECC_UNCORRECTABLE_XFP_DATA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Poller device driver detected multiple bit errors and can't correct), (Recommended Action: Try to OIR the optics on the poller ports. If problem persists, plugin different optics and do also try for LC reload. If still problem persists, it could be faulty optics.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-CIS_REPLACE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: CIS replace error), (Recommended Action: Please check the card is a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-INVALID_NNS
### Response:
(Severity: 3), (Category: INFRA), (Description: A repository has been configured in a Network Namespace that cannot be opened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Unconfigure all repositories in the non-existent Network Namespace, or ensure that the VRF is configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-MACSEC_FIPS_POST_CFG_CHANGED
### Response:
(Severity: 3), (Category: L2), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in line card has already started the phy initalization process before this config is received. Needs attention with chassis line card reload.), (Recommended Action: System NODE is inconsistent. Need to reload the NODE for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-EAOPT_SEND_UNSUPPORTED_MAC
### Response:
(Severity: 3), (Category: IP), (Description: The send-key from the specified keychain has a MAC(Message Authentication Code) algorithm which is not supported by the TCP Enhanced Authentication (EA) draft and/or the IOS-XR implementation.), (Recommended Action: Check the MAC algorithms supported with TCP Enhanced Authentication by IOS-XR and modify the MAC algorithm accordingly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-ADMIN_INCONSISTENCY_ALARM
### Response:
(Severity: 3), (Category: MGBL), (Description: The admin plane configuration inconsistency alarm has been raised or cleared.), (Recommended Action: If the configuration inconsistency alarm has been raised, run 'clear configuration inconsistency' in admin mode to synchronize the persistent configuration with the running configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY-4-PARSER_VALIDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Semantic validation failed inside the routing policy parser DLL.), (Recommended Action: Check for the Invalid RPL configuration that is reported and fix the semantic error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-MVRP_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: L2), (Description: The L2FIB platform capabilities indicate that MVRP is not supported, but L2FIB has received a request to send an MVRP packet, indicating a capability mismatch), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-MALLOC_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The requested operation could not be accomplished because of a low memory condition. %s - indicates the location of the error.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-LINE_STATE
### Response:
(Severity: 3), (Category: L2), (Description: The VC Manager returned an error after receving a request to set the line state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-1-ERR_ASIC_ERROR
### Response:
(Severity: 1), (Category: FABRIC), (Description: If the Asic is in Halt state, the software will reset the power to recover. Otherwise, the fabricq has encountered an ASIC error which software cannot resolve.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_UCORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory uncorrectable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_9_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-BACKUP_FPGA_LOADED
### Response:
(Severity: 3), (Category: L2), (Description: The Backup FPGA images has been loaded on the indicated card. This can happen when optics driver detects that the Primary image is corrupted, and the HW fallbacks to load the backup image to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for FPGA to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-BAG_REG_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to register a SysDB Bag definition.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show rsvp interface' command in IOS XR?
### Response:
The 'show rsvp interface' command is used to display RSVP information for interfaces. It shows the interface name, the bandwidth reserved by RSVP, the maximum bandwidth that can be reserved, and the neighbors on the interface. This command is useful for verifying RSVP configuration and state on interfaces.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-2-BPM_SR_CFG_CHANGED
### Response:
(Severity: 2), (Category: ROUTING), (Description: BPM will be notified of any change in the SRLB range config. BPM internally mainatains a Hash Table for all the SID values configured for various entities. In case the SRLB range is changed, hash table has to reconstructed. Please restart BPM to for hash table reconstruction. Also, some of the SID values can go out of range. In that case, please reassign those SIDs such that they are within the newly configured SRLB range.), (Recommended Action: Restart BPM process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_LIB-6-EXTENDED_RETRY_PERIOD
### Response:
(Severity: 6), (Category: L2), (Description: A retry has been going on in the background for an extended period of time. This may be due to a misconfiguration or may be an indication of other unexpected behavior.), (Recommended Action: If current system behavior is working as expected, then No action is required.. If the current system behavior is unexpected, then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_EA-3-NOMEM
### Response:
(Severity: 3), (Category: L2), (Description: The IPv6 EA process could not allocate memory needed to program some IPv6 feature.), (Recommended Action: The operation specified in the message failed due to a memory allocation failure. If this problem occurred in response to configuration then that config should be removed and reapplied. If there are further issues then restarting the ipv6_ea process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-DDR_IF_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Punt DDR interface has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-ERRMAC
### Response:
(Severity: 6), (Category: INFRA), (Description: MAC error were detected.), (Recommended Action: To determine why this problem occurred, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp confederation peers' command in IOS XR BGP configuration?
### Response:
The 'bgp confederation peers' command is used to define the sub-AS that are part of the confederation. It is used in conjunction with the 'bgp confederation identifier' command. The sub-AS numbers are local to the confederation and are not visible to external peers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_XAUI_RDY_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-1 XAUI not ready on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP Rx power less than or equal to the low Rx power alarm threshold. The XFP is the pluggable optics on the line cards. The Rx power threshold values are read from the XFP.), (Recommended Action: Verify the device and the RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-PIE_LIST_MISMATCH
### Response:
(Severity: 7), (Category: INSTALL), (Description: PIE file appears to be damaged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CALVADOS_DUMPER-5-COPY_FAIL
### Response:
(Severity: 5), (Category: INFRA), (Description: Dumper has failed to copy file to target location.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Collect this error message, along with the output of 'show tech-support ctrace'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-SHUTDOWN_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node will be reset because user has administratively 'shutdown' or 'no shutdown' the node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_INVMGR-6-IF_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SFP or XFP or CFP or QSFP entity is inserted into the line card.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_IPC-3-DEBUG_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Encountered an error in the debug module.This error should not impact the major functionality of the module.), (Recommended Action: Please collect the console log and CLI output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP maximum neighbor feature?
### Response:
The BGP maximum neighbor feature allows a limit to be placed on the number of dynamic neighbor connections that can be established as a result of the BGP dynamic neighbor feature. It protects against resource exhaustion. It is configured with the bgp max-neighbors command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_PWR_SUPPLY_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-3-INFO
### Response:
(Severity: 3), (Category: L2), (Description: The dwdm encountered an error that would lead to degraded service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-UPTIME_RR_NOT_SET
### Response:
(Severity: 4), (Category: OS), (Description: ResetReason is not yet set.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBJ_MGR-3-CLEANUP
### Response:
(Severity: 3), (Category: APP_INFRA), (Description: When 'object group' shutsdown, the OBJ Manager (obj_mgr) process shutsdown and cleans up. Something has failed in this proceedure.), (Recommended Action: Allow OBJ Manager to restart. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-7-INCORRECT_PAK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Ethernet driver got a corrupted packet in its transmit complete, possibly because its client (EES) has zeroed out the packet contents before eth_server is done with the packet.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show buffer-manager region all context, SH_CMD show buffer-manager region all context, dumpcore running <jid/process name> of eth_server, ingressq, fabricq_mgr, fsdb_server, fsdb_aserver, sfe_driver & fgid_server<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show buffer-manager region all context, SH_CMD show buffer-manager region all context, dumpcore running <jid/process name> of eth_server, ingressq, fabricq_mgr, fsdb_server, fsdb_aserver, sfe_driver & fgid_server<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-2-ERR_SHUTDOWN
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fabric driver encountered a system error in bringing down the node through shelfmgr. The card and its fabric ASICs should have been isolated from the system before the shutdown attempt.), (Recommended Action: Check the health of the shelfmgr process on the dSC RP. If shelfmgr is healthy, and the card cannot self reload, then reload the card with the following command in admin mode: 'hw shut loc y/SMx/sp', where x is the SM module number that generated the error, y is the rack that it is in. If manual shutdown does not work, or if the error recurs, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-4-SVC_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: A service API warning is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-4-cpe_prefix
### Response:
(Severity: 4), (Category: SERVICES), (Description: Configuration of map-t should be in accordance with RFC7599 and RFC7597.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install verify packages command in IOS XR?
### Response:
The 'install verify packages' command is used to verify the consistency and integrity of the currently active software packages on the router. It checks for any missing or corrupted files and reports any issues found.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_0_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power less than or equal to the low Tx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD-3-OVERCURRENT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ClkCtrl driver detected a card overcurrent condition), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_REMOTE_LINK_FAULT
### Response:
(Severity: 6), (Category: L2), (Description: The remote peer has indicated that a link fault has occurred. This indicates a uni-directional link.), (Recommended Action: Check the wiring between the two interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-NO_MEMORY
### Response:
(Severity: 7), (Category: HA), (Description: Memory allocation failed. This is likely to be a resource shortage rather than a coding error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you check the installation log in Cisco IOS XR?
### Response:
The installation log in Cisco IOS XR can be checked using the 'show install log' command, which displays the history of install operations performed on the router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-FILE_NOT_FOUND
### Response:
(Severity: 3), (Category: IP), (Description: The given file was not found at the specified path), (Recommended Action: Check the path of file specified for download.Also make sure the entire pathname of the file is provided.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_DATA_FIFO_OFLOW_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg data fifo overflow on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_LTRACE-7-ERR_INFO_VERBOSE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: PLATFORM L2VPN, error information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC_CMN-5-rest_global_queue_limit_warning
### Response:
(Severity: 5), (Category: OS), (Description: Too many REST sessions opened or REST API is generating events faster, than REST client can consume.), (Recommended Action: Check subscription and state of REST clients. If clients are already disconnected, but connections were not closed gracefully, then <Bold>clear tcp pcb <pcb><NoBold> can be used to close any connection on the router. Decrease number of generated notifications by decreasing number of elements related to subscribed notifications (number of nodes, links or prefixes in topology if client is subscribed for topology notifications or number of LSPs if clients is subscribed for LSP notifications) or solve network issue causing increased number of events.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-HIGH_POWERED_PLIM_NOT_POWERED_ON_IN_UPPER_BAY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: High Powered PLIMs in the upper slot (s = 0..7) may only be powered on if there is an Identical High Powered PLIM powered on in the paired lower slot or if the paired lower slot is empty or if the paired lower slot is having a Non High Powered PLIM.), (Recommended Action: Please insert the PLIM in a lower slot where the slot above it is either empty or having an Identical High Powered PLIM. or insert the PLIM in a an upper slot where the lower slot is either empty or having an identical PLIM or having a Non High Powered PLIM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-XFP_WARN_TX_PWR
### Response:
(Severity: 4), (Category: L2), (Description: XFP hit/recovered TX Low power warning.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-NODE_UNRESPONSIVE
### Response:
(Severity: 3), (Category: INFRA), (Description: A node is not responding to communication from the Orchestrator), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWRMON-1-SINGLE_FEED_NO_EFFECT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Warning message that single feed mode was configured on a V1 or V2 AC power modules chassis, the config has no effect'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: IP), (Description: Failed to register with the debug library to have the library automatically handle changes to any of the SOCKET debug flags.), (Recommended Action: The transport process will try to recover from this by retrying/ restarting. If the messages are not seen again, the problem was transitory and has been recovered. There is no need to take any action. If the messages come continuously, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-FD_CRIT_LIM
### Response:
(Severity: 3), (Category: HA), (Description: A process is potentially leaking FDs. Critical limit has been crossed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-LOW_LASER_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP laser bias less than or equal to the low laser bias warning threshold. The XFP is the pluggable optics on the line cards. The laser bias threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-LOW_TEMP_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP temperature less than or equal to the low temperature alarm threshold. The SFP is the pluggable optics on the line cards. The temperature threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment temperatures'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPD-4-INVALID_DEFAULT_GATEWAY
### Response:
(Severity: 4), (Category: IP), (Description: The error occurs when Server is in process of sending OFFER/ACK to client, either without default gateway or subnet of default gateway and yiaddr mismatched. Client may not be able to send Renew and Release.), (Recommended Action: This requires valid Default Gateway must be configured under dhcp server profile/class or pool. dhcp ipv4 profile TEST server default-router 101.101.101.101 or under class clase TEST_CLASS default-router 101.101.101.101)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_SYSTEM_MAC_RESET
### Response:
(Severity: 4), (Category: L2), (Description: After a resync has occurred between Bundle Manager and the MAC allocation process, the MAC address assigned for use as the system MAC has not been found in the addresses allocated to bundle manager. Bundle manager will choose a new MAC address for use for this purpose. A flap will be seen on bundle links running LACP.), (Recommended Action: The Bundle Manager process will select a new address automatically, so no further action is needed to resolve this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-2-NOMEMORY
### Response:
(Severity: 2), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-2-ERR_CONTROL_MSG
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fabric control software running in another rack has notified a status change that is impossible or illegal.), (Recommended Action: This error can be caused by an attempt to use the router with in a fabric configuration that is not supported. For example, there may be three or more linecard racks that have dual-rack fabric cards installed. Ensure that the correct racks are installed in the router and that software displays the correct rack numbers and rack types for each rack. Ensure that the software fabric configuration is correct. If these steps do not find an error, restart fabric control software on the rack that produced this message, and on the rack sending the illegal message. 'admin process restart fsdb_server loc <loc>'. As restart process is disruptive, save output of all the commands mentioned in required_info before restarting the process. If problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-TDDR_FIFO1_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: TxDDR 200 to 1875 FIFO 1 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ASIC_RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: The asic device failed due to the above mentioned error. The device is being reset to recover from failure), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP if the asic is continuously reset and recovery does not take place after device reset: 1. 'show processes fia_driver location <loc>' 2. Collect all ltraces: 'show controllers fia trace all location <loc>' 3. dmesg and /var/log/messages from host and XR VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-6-CONFIG_MAXIMUM_CHANGE
### Response:
(Severity: 6), (Category: ROUTING), (Description: The maximum number of static route configurations which may be entered has been changed.), (Recommended Action: Refer to the configuration guidelines for the maximum allowed limit for static routes)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a community list?
### Response:
To configure a community list for BGP, use the 'community-set' command in global configuration mode. RP/0/RP0/CPU0:router(config)#community-set COMMUNITY_SET1
RP/0/RP0/CPU0:router(config-cset)#100:1
RP/0/RP0/CPU0:router(config-cset)#exit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TUPLE_UNPACK_MASK
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to tuple_unpack_mask() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-CLIENT_RESYNC_TIMEOUT
### Response:
(Severity: 3), (Category: FABRIC), (Description: 'FGID Client failed to finish resync at given time'), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLC-2-ABORT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-2-RLIMIT_HIT
### Response:
(Severity: 2), (Category: L2), (Description: The system has notified a process that the process has hit its rlimit. The process is abnormally restarting so that the memory usage can be investigated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Provide the core created by the process restarting. The system should have recovered automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_PROCESS_START
### Response:
(Severity: 3), (Category: ROUTING), (Description: The BPM failed to start the process in the error message. As a result, the process will not be running.), (Recommended Action: Check that the process is not already running using the 'show process bgp location all' or 'show process brib location all' command as appropriate. If the process is not running, attempt to start it using the 'process restart' command. If other error messages are seen along with this one, or when attempting to manually start the process, please consult the documentation for those errors and attempt to rectify them. If problems persist, copy this error message and any others exactly as they appear on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-PEC_POWERBAD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Not enough power required for operating the inserted expansion card.), (Recommended Action: Enable/Power-on the card only if we have sufficient power.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER_RSP4-3-PID_READ_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: Failed to read PID correctly for that card in a particular slot), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD_MRIB-3-INIT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: MRIB (multicast routing information base) failed to initialize. MRIB is the central routing information base for multicast components. It provides coordination among all multicast routing components and forwarding. The effect is that multicast forwarding will not function. %s - indicates the reason for the failure.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process mrib' to verify that the process is up and running. If it is still non-operational, try doing 'process restart mrib' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-TCAM_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: 'TCAM init failed due to initalization failure'), (Recommended Action: Software will reboot the card automatically. If not recovered after multiple reboots, RMA the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-BAD_OP_TYPE
### Response:
(Severity: 3), (Category: INSTALL), (Description: The function does not support the given install operation.), (Recommended Action: An unexpected operation type was passed to the Install infrastructure. Please check the operation for correctness and retry. If the message recurs continuously, please contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-2-LTRACE_BUF_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A fault occurred while registering the mentioned ltrace buffer. This means that system logging capabilities for the pldmgr library component will be inoperable.), (Recommended Action: Please check the logs for the ltrace service for more insight into the failure. Restart the process for the reintialization of ltrace service.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_XBAR-2-EJECTOR_SWITCH_PRESS
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Crossbar driver detected that the front panel ejector switches on the fabric card were pressed/released to de-activate the card but the card was not removed from chassis.), (Recommended Action: Please remove and re-insert the fabric card and ensure that the ejector switches are not pressed/released after insertion. If this error message persists after card insertion, then the card needs to be replaced.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RIB_CONN_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: BGP's connection to the RIB could not be established and a retry timer could not be started. This is transient message and BGP should recover without user intervention.), (Recommended Action: If a BGP prefix is missing in the rib then please collect following on the node where error occured and contact TAC: - show tech routing bgp - show logging - show rib trace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_OC768-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message from PLIM OC768 driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-6-ACCESS_GROUP_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: ACL applied to interface on which denied groups join previously.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_CPP_LP_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EBS to CPP low priority FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-TOP_MEMORY_USER_WARNING
### Response:
(Severity: 4), (Category: HA), (Description: This process is one of the top memory users in the system. If the system reaches critical memory exhaustion, this process is subject to restart or termination. If the process is listed as 'Killed', then the system is in the process of recovering the resources used by the process.), (Recommended Action: Collect system log information. Contact technical support if the problem is not a misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-3-TCAM_MGR_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Request to TCAM Manager for programming QoS match rules into TCAM failed. Feature manager sends this request to TCAM manager when a policy is attached/removed to/from an interface (or fabric), when there is a change in bundle membership or when an ACL which is used in a QoS policy is modified. The most likely cause of this error is not enough space remaining in TCAM.), (Recommended Action: Try modifying QoS and ACL configuration to reduce TCAM usage. If TCAM space doesn't seem to be the reason, try removing and re-applying the QoS policy. 'no service-policy input | output <policy-name>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_LQ_FULL_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 0 LQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-NO_CWD
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The current working directory could not be determined, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_ITERATE
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-RFD_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Network Processor has detected an RFD buffer accounting issue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-RULES_SNAME_LEN_EXCEEDS_MAX
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The interface shortname property length specified in the rules file exceeds the max allowed of 4 chars. The short name gets ignored by the parser. Please check the rules file.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-5-TCAM_MISMATCH_COMPLETED
### Response:
(Severity: 5), (Category: L2), (Description: This message indicates completion of the automatic correction following the detection of a mismatch between the LC CPU software view of TCAM content, and what was actually found in hardware. The system attempts to collect troubleshooting information concerning the mismatch; however, should there be insufficient line card memory to do so, this information is not collected. The text of the message indicates whether information was collected, along with the location of the file containing the information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLRMGR-6-RELOAD
### Response:
(Severity: 6), (Category: PLATFORM), (Description: MLR configuration has changed for the LR mentioned in the message,this is an expected behaviour. We will see this message in following cases. 1.Any new Slot Addition to the MLR Group 2.Deletion of slot from the LR Group 3.Slot Additions or removal between LR Groups.), (Recommended Action: Expected Behavior of MLR in the above cases as explained. In case of reload without any External Interference,please provide the below logs Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mlr trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mlr trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-3-DLL_TRACE
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-GETLINE_DATA
### Response:
(Severity: 3), (Category: MGBL), (Description: 'lib/ui library API related to getline has failed'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_CORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory correctable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-UNEXPECTED_LOOPBACK_STATE
### Response:
(Severity: 6), (Category: L2), (Description: While running the link in OAM Loopback mode the local peer received an unexpected multiplexer and parser state combination from the remote peer. This may indicate a problem with the remote peer.), (Recommended Action: No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-3-SIGNAL_ATTACH
### Response:
(Severity: 3), (Category: MGBL), (Description: Config process is failing to perform event handling intialisation for a signal. The operations could cause bad handling of the signal.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_EDM-3-ENCODE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-SPAN_CLEANUP
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A failure has occurred while cleaning up span on the router.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TASKID_MISMATCH
### Response:
(Severity: 3), (Category: MGBL), (Description: Total number of taskid for the template is 0, but taskid struct is not NULL.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_STAT_PUB-3-SHMEM
### Response:
(Severity: 3), (Category: HA), (Description: Failed to initialize the shared memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-2-HIGH_LASER_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP laser bias greater than or equal to the high laser bias alarm threshold. The XFP is the pluggable optics on the line cards. The laser bias threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Entity specified in the messages is inserted into the chassis and inventory manager is updated. This message is used by CWI/CTM to determine when the entity-related information (read from the EEPROM) is available in inventory database.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-INVALID_NEXT_MAC_OFFSET_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Next avaliable free tcam MAC offset is not valid), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-CHASSIS_POWER_THRESHOLD_CLEAR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Real time power consumption in the chassis (power consumed by all the nodes) has come below the threshold of 75% of the worst case available power. Hence the alarm is cleared.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-ROOT_DEVICE_BUS_CRITICAL_THRESHOLD_EXCEEDED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A root device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-HA_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: High Availabality initialization failed. If this occured during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-4-ERRRATE_EXCEED_FAST
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the PSE Driver to indicate that a high rate of specified errors is being detected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_LIB-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug.), (Recommended Action: This not a critical error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The process failed to initialize. The Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-MIBCFGERR
### Response:
(Severity: 3), (Category: SNMP), (Description: Error in opening cfg directory : The MIB configuration files should be located in the directory '/ios/mib'. This directory could not be read, for some reason. General Error: A syntax error was encountered while parsing the given MIB configuration file. The MIB referred to by this configuration file will not be loaded. Failed to read MIB Cfg file: This could be due to a low memory condition. Missing config entries: One or more required entries are missing from the given MIB configuration file. The MIB referred to by this configuration file will not be loaded.), (Recommended Action: Error in opening cfg directory : Ensure that the '/ios/mib' directory exists and contains one or more files with a '.mib' suffix. Failed to read MIB Cfg file: Ensure that the specified configuration file does exist on the system Missing config entries or General Error: Also provide the contents of the given configuration file. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-FLEX_ALGO_DEF_ADV_NO_SPACE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Flex-Algo defintion does not fit in the Router Capability TLV.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G709-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is an debug message in the G709 PI component to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-7-LC_POWERUP_CHECK_FAIL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELOGM-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: During initialization, an unexpected error was encountered. The process will exit and be restarted by System Manager.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LINK-3-UPDOWN
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The interface hardware went either up or down.), (Recommended Action: If the state change was unexpected, confirm the configuration settings for the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-LOW_LASER_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP laser bias less than or equal to the low laser bias warning threshold. The SFP is the pluggable optics on the line cards. The laser bias threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6_API-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: This can fail if we due to event manager or sysdb init failures.), (Recommended Action: Process restart of the process the type6 Api library is part of might solve the problem. For further detail contact the Cisco technical support representative with the gathered information and the exact error message as it appears.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE_ERR_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE_ERR_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_INVALID_EVENT
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal error occured because SPM server received an invalid event.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-CURRENT_MAXIMUM_REACHED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Tunnel Count has reached the current maximum limit.), (Recommended Action: Use the 'maximum tunnel-te <N>' config CLI to increase the current maximum value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-OP_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The given operation failed.), (Recommended Action: Retry. If problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_SUBDB
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error using SubDB The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-COALESCE_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: Coalescing failed on a device. Records for the device will be discarded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-NOT_AUTHORIZED_FOR_IPV4_MOBILITY_SERVICE
### Response:
(Severity: 3), (Category: IP), (Description: Service configured for the MN or Logical-MN in the MN profile in domain configuration is IPv6-only; however, IPv4 HoA Request option is received in the PBU.), (Recommended Action: Configure IPv6-only service on the MAG. Alternatively, configure service on the LMA in the MN profile to match with that on he MAG. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-DETECTED_TX_PDMA_STALL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CPUCTRL TX PDMA ring remained full over non-transient period. Packets which could not be sent were discarded. The downstream ASIC may be stalled. Asic error logged with queue details. %d - port number %s - device name %d - queue number %s - client name %d - current descriptor index %d - current refill descriptor index), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-SYSDB_CONN
### Response:
(Severity: 3), (Category: MGBL), (Description: The HTTP CLI Agent was unable to create a connection to the SysDB component. It may be that the communication infrastructure is faulty, or that the SysDB component has not yet restarted. If the errors persist, the router may need to be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_LIB-7-ERR_LWM_SEND
### Response:
(Severity: 7), (Category: FABRIC), (Description: Unable to send a LWM message to the Ingressq server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ClkCtrl encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_RAI_SYNC_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The BITS receiver has detected RAI defect for incoming signal. Receiving remote alarm indication(RAI) means the far-end equipment over the T1/E1 line has a problem with the signal it is receiving from the upstream equipment.), (Recommended Action: Verify input BITS clock signal is set up correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-2-CRIT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PLATFORM FIB, Tomahawk specific init error), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-INTERNALERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show tech-support routing ospf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-5-HA_NOTICE
### Response:
(Severity: 5), (Category: ROUTING), (Description: Used for logging of events like process startup, entry and exit of GR events.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-ENS_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SIM ENS operation error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XRV9K_FSM-3-CLEANUP_FIB_STATS_RSRC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: When process fib_mgr is respawned after a crash, it will require forwarding statistis manager to clean up its statisitcs resources. The specific error happened when forwarding statistics manager cleans up FIB statistics resource.), (Recommended Action: Please collect output of the following commands: show log show process fib_mgr location <> show fsm trace client job <fib_mgr_jobID> location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-RESTART_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: SSM process tried to restart the process using the kill command and encountered an error. Check state of the process specified by pid.), (Recommended Action: Collect system logs. For mentioned pid collect show process <pid> and follow process <pid> Also collect show process blocked , show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_FRAME_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Decoder A framing error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_7_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-SCHEDPOLICY_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver was unable to set the scheduling policy for the interrupt handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_STR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, INIT error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G709-6-INTERFACE_STATE
### Response:
(Severity: 6), (Category: L2), (Description: Interface state and controller state changed due to set/clear of an alarm.), (Recommended Action: If Controller state is changed to down. Investigate the source of the alarm. In case controller state is changed to UP, then No action Required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-UNLOAD_DLL_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: An old DLL can not be unloaded. This will impact the coalesce functionality of OBFL.), (Recommended Action: Please restart the obflmgr process. If the issue is seen even after restart then please collect the following data and contact support. collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-REMOVE_DONE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package remove requested on this satellite has completed. Run 'show nv satellite status' for more information.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALARM_TEST-3-ALARM_GENERATE
### Response:
(Severity: 3), (Category: OS), (Description: Autogenerated alarm), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-MC_HI_SBE_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast high priority fifo single bit ECC error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB-3-REGEXP_COMP
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to compile given regular expression for linkUp/Down notif status.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-SYNC_REQUEST
### Response:
(Severity: 7), (Category: OS), (Description: When the single writer mode is set, RDS library allowes to create a ticket. When Ticket request was queried, it failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-ROUTE_ADD_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Count not add a route for the HoA or HNP or Mobile Network Prefix.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-SDR_REBOOT_INFO
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that the SDR will be rebooted as part of the specified install operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-TCAM_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failure in MAC tcam region management in Platform LC L2FIB BRIDGING component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_NSR-3-SPRAYER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Could not set the HFR Sprayer header parameters. %s- Type of the error. %d- return value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMDB_CC-2-INCONSISTENCY
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PMDB Consistency checker detected inconsistencies (either missing or leak) entries in port mapper database. Please check the content of /tmp/pmdbcc_inconsistencies.log for findnig which entries are missing or leaking. This may result in drop of control plane traffic.), (Recommended Action: Delete and create the affected interfaces based on the log file.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-UNEXPECTED_VALUE
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB server came across an unexpected value for the specified parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPMC_GTRIE_DEFAULT-2-FATAL
### Response:
(Severity: 2), (Category: ROUTING), (Description: Internal error. Usually sever problems such as failing to free memory), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-GEN_RC_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some requested operation failed. The text of the message displays the failed operation, error code and error message (if available).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VLANIFMIB-4-SYSDB_ACCESS
### Response:
(Severity: 4), (Category: SNMP), (Description: The VLAN Interface table relationship MIB encountered an error while connecting to, or accessing data within the System Database. It is likely that an SNMP query that was in progress will not have been completed.), (Recommended Action: Retry the operation that caused the message to be displayed. It may help to restart the SNMP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-TX_CH_LOS_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects a loss of signal on a channel. This can be due to: [1] A valid superstar Tx link is not powered on by software [2] An invalid superstar Tx link has the corresponding Tx POD channel configured [3] A valid superstar Tx link has malfunction or the Tx channel has malfunction to not receive signals from the superstar Tx link.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_P2MP_ID_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the P2MP auto-tunnel aborted since all IDs in the P2MP auto-tunnel ID range have already been allocated.), (Recommended Action: Increase the P2MP auto-tunnel ID range.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_RT_SHOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, show fail error), (Recommended Action: This is a warning that some information is missing from the output of the show command.PLease collect the show command, console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_M_FREE_EMPTY_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast free pages empty on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-EVENT_CONN_CREATE
### Response:
(Severity: 7), (Category: INSTALL), (Description: The library failed to create a connection for registering for install notifications.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LINK_INVALID_CUR_INDEX
### Response:
(Severity: 3), (Category: OS), (Description: A internal error has occured. The QSM directory scrub routine has been aborted. This should not cause any instability unless this message is repeated many times.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-MC_LO_SBE_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Multicast low priority fifo single bit ECC error), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-STBY_BACKUP_READY
### Response:
(Severity: 6), (Category: HA), (Description: RMF has determined that the standby card is ready to take over as primary if it needs to.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-EBS_CPP_HP_TAIL_DROP
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Egress Buffer and Scheduling to CPP high priority tail drop.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the Configuration File System (CFS) in IOS XR?
### Response:
The Configuration File System (CFS) in IOS XR is a virtual file system that stores the running configuration, committed configurations, rollback points, and configuration templates.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-6-DEBUG_DETAIL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an info message in the RDM lib to indicate the values of important variables / pointers), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_PROXY-3-INIT
### Response:
(Severity: 3), (Category: L3), (Description: Failure occured during the initialization of route proxy component Logs the reason for failure. Process would restart again.), (Recommended Action: Collect console and route proxy logs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-NOT_FOUND
### Response:
(Severity: 3), (Category: SERVICES), (Description: The SESVI EA process received a request to process an interface that does not exist in its database. This indicates some sort of internal inconsistency.), (Recommended Action: It may help to restart the SESVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_INPLACE-3-ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS EA process encountered the specified error.), (Recommended Action: Collect the outputs of 'show qos-pal trace all location <location>' and copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-NOBACKBONE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The router was flagged as an Area Border Router (ABR) without backbone area in the router.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show ospfv3 <process-name> trace all - show running-config router ospfv3)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_0_FIADDR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from FIA DDR on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-VC_CREATE
### Response:
(Severity: 3), (Category: L2), (Description: LMI was unable to create a VC it needed to function properly. This could be a result of low memory conditions or some error while interacting with fr_vcm process. The second argument will show the error string found.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-6-CLEAR_REMINDER
### Response:
(Severity: 6), (Category: L2), (Description: Faults have disappeared from a non-revertive ethernet ring instance, so now it is ready to be cleared by the user. A non-revertive ring instance by definition requires user action because it does not revert automatically. The act of clearing the ring will cause the location of the block to move to the RPL link and the state to transition to Idle.), (Recommended Action: Once ready to move the block to the RPL link, the ring instance can be cleared with the <CmdBold>ethernet ring g8032 clear<noCmdBold> command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth feature?
### Response:
The MPLS TE auto-bandwidth feature allows MPLS TE tunnels to automatically adjust their bandwidth based on measured traffic flow. It measures the average output rate and adjusts the tunnel's bandwidth up or down based on a configurable adjustment threshold. Auto-bandwidth aims to right-size tunnels to actual traffic needs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-L2VPN_SIGNAL_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected that the prefix was learnt with a signalling type different from what is configured for the vrf. We do not allow both types of signalling for nets with the same RD), (Recommended Action: This msg is info only. Need to check L2VPN Configuration in the topology across all PEs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-INIT_FAILED2
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred at system initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes msdp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes msdp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process msdp error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process msdp error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_CRP-3-IPARM_RELATED_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A problem occurred when a call to one of the IPARM APIs was made.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace interface activities<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace interface activities<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp candidate-rp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-EXIT_ERROR
### Response:
(Severity: 3), (Category: INSTALL), (Description: Insthelper encountered a fatal error condition, and cannot proceed. Check the operation, error value and error string to determine what has happened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SERVER-7-CFG_THR_INIT_ERR
### Response:
(Severity: 7), (Category: OS), (Description: Failed to init ltrace config thread after several retrys.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered an error to bind to admin plane sysdb server. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-4-SRCINTF_NOTUP
### Response:
(Severity: 4), (Category: SECURITY), (Description: The interface specified as source interface is not UP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-FILE_OP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Current operation on the file has failed.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WAN_LIB_VCC-3-UNKNOWN_IDBTYPE
### Response:
(Severity: 3), (Category: L2), (Description: The IDB type of this IDB is not recognised.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_ide-1-CARD_REMOVE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Probably the flash card has been removed.), (Recommended Action: Reinsert the flash card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAIPC_NETIO-7-ENCAPS_FUNC_ERR
### Response:
(Severity: 7), (Category: OS), (Description: qnetcaps_encaps() has been called, which should never happen.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-TX_CH_LOS_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Tx POD detects a loss of signal on a channel. This can be due to: [1] A valid superstar Tx link is not powered on by software [2] An invalid superstar Tx link has the corresponding Tx POD channel configured [3] A valid superstar Tx link has malfunction or the Tx channel has malfunction to not receive signals from the superstar Tx link.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-HISTORY_LOGS_DELETED
### Response:
(Severity: 6), (Category: INFRA), (Description: The history logs were taking up more than the recommended space, and so older logs were deleted. The most recent logs will still be present.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-REDIST_THR_PFX
### Response:
(Severity: 4), (Category: ROUTING), (Description: We have reached the warning threshold number of redistributed prefixes.), (Recommended Action: Check if redistribution of large number of prefixes is desired and has not been wrongly configured)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-NO_CARDS_DEFINED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No card information is defined in the PCMCIA device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-3-INVALID_PARM_DRIVER_START
### Response:
(Severity: 3), (Category: MEDIA), (Description: An invalid parameter value was passed to start the media driver.), (Recommended Action: Report this message to TAC. Capture console log, 'show media' and 'show media trace' output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_T3E3-3-EVT_MGR_CREAT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an internal software error. This message indicates that the SPA process was unable to create event manager.), (Recommended Action: Collect the trace log via 'show plim t3e3 trace error location all' 'show plim t3e3 trace info location all' 'show logging location <>' and collect console logs and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_HEAP-7-PROC_RUNNING
### Response:
(Severity: 7), (Category: HA), (Description: A request to move or copy CDM data from one node to another has failed because an instance of the process is running on the destination node.), (Recommended Action: Determine why the process is running on the destination node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-MEM_NOTIF
### Response:
(Severity: 6), (Category: ROUTING), (Description: An unexpected event from the system monitor was seen.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_3_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-ABORTBULK
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-RDTREE_OPER_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <ISM> show cef trace location <ISM> show cef platform services trace ipv4 all reverse location <ISM> show cef platform services trace common all reverse loc <ISM> show cef <destination ip> location <ISM> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-NT_SWO_PON_UPGRADE_REQD
### Response:
(Severity: 3), (Category: INFRA), (Description: For SC HW Boardtype less than 0.1, Surprise Link Down notification on the PCIe bus from the PCIe Switch on the Switch Card is not propogated to the SC PCIe Switch. As a workaround, the CCC PON on the SC cards detects the switch card is down and inserts a surprise bit into the upstream PCIe switch register.), (Recommended Action: Upgrade the SC CCC PON as soon possible and power cycle the SC card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-0-DAO_LINK_STATE_CHANGE_FATAL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The internal link interface for the specified port is down.), (Recommended Action: The board would get reloaded. On reload of board, run following commands from RSP ksh to decode PCDS information - pcds_decode -c NIANTIC <.pcds file>. If users has auto reset option disabled in admin config, then the board would not get reloaded on its own. At this stage collect the output of (admin)'show tech-support control-ethernet location <nodeId> file outputFile')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON_PROXY-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon Proxy process failed to initialize. The System Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-EXITING
### Response:
(Severity: 3), (Category: SERVICES), (Description: The process was unable to inform System Manager of its graceful shutdown.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_SES_LIMIT_NOT_REACHED
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address is no longer the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: An error (other than EINTR) occured in the event loop. The process has exited and restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LSPV-7-MSG_INIT_RC
### Response:
(Severity: 7), (Category: ROUTING), (Description: Successful initialization of a sub-system required by LSPV_SERVER process failed. This may have occurred due to heavy resource utilization in the system or lack of disk space.), (Recommended Action: Wait a few minutes, and re-attempt to start the LSPV_SERVER process. If the system continues to experience this error, check available storage space.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T3E3-4-UPDOWN
### Response:
(Severity: 4), (Category: L2), (Description: The specified T3E3 is operationally down due to alarm. Check alarm status using show controller t3 command on the cli.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: CONTROL_DRIVER Driver Initialization failed. Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_LOSS_OF_SIG
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_PD-3-NO_SYM
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFD PD encountered an error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Collect console log and the following information and contact TAC support with this info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - show tech-support routing bfd - show bfd all - show bfd all location <> - show bfd session detail - show bfd session detail location <> - show uidb data location <> <interface name> ingress - show uidb data location <> <interface name> ing-extension)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-MSG_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: The message received by an application had inconsistent values.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_PKT_LEN_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 0 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-3-INIT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred during initialization of the port details or bridge-domain details or igmp snooping profile.), (Recommended Action: Check is the profile is attached to the bridge domain and if the igmp snooping ports have been included in the profile. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping profile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping profile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping bridge-domain detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping bridge-domain detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping port detail debug<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping port detail debug<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-7-ERR_CHKPT_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID Allocator was unable to register the checkpoint table. The fgid_allocator process may need restarting, if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-VM_CORE_DUMP
### Response:
(Severity: 3), (Category: DRIVER), (Description: HOST has reported a VM core dump event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-PICKUP_FAILED
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB client library has failed to pick up a message from the server after receiving an async pulse.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-7-CBC_POST_RESET_NOTIFICATION
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Informational log only), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICCP-5-ISOLATION
### Response:
(Severity: 5), (Category: INFRA), (Description: All configured backbone interfaces for the ICCP group are down.), (Recommended Action: Check the backbone interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-NOMSGCHUNK
### Response:
(Severity: 3), (Category: ROUTING), (Description: A request was made to allocate a message size for which there was not enough memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-3-SPI_BUS1_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a SPI4 or SPA Bus Error for SPA0 (SPA Bridge0) or SPA1 (SPA Bridge1).), (Recommended Action: Remove the SPA. Examine the SIP bay and the SPA connector pins for damages. If no damage found reinsert the SPA. If the problem persists, call tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_EA-4-ERR_RWMGR
### Response:
(Severity: 4), (Category: L2), (Description: PPP EA encountered an error communicating with Rewrite Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Rewrite Manager Server process, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP EA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OUNI-4-OUNI_DEPRECATED
### Response:
(Severity: 4), (Category: ROUTING), (Description: GMPLS OUNI/NNI support, including this command, will be removed in release 4.3.0.), (Recommended Action: Please do not use GMPLS OUNI/NNI configurations and commands anymore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IMC_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error on a particular interface whilst communicating with Interface Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Interface Manager Control Server, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-INIT_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: An error occurred during initialization.), (Recommended Action: Normally this message type indicates a transient error, and even though it will cause the process to be terminated, the problem will usually be remedied once the emitting process is restarted. If the error keeps occuring frequently then copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key features of OSPF?
### Response:
Key features of OSPF include: fast convergence, support for VLSM/CIDR, authentication of routing updates, route summarization, equal-cost multipath routing, and hierarchical network design using areas.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-INIT_FQ_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to initialize the Free Queues.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_NO_TOD_MSG_SYNC_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No TOD messages are being detected on the GPS port UART receiver.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPA_DISCOVERY
### Response:
(Severity: 4), (Category: L2), (Description: Failed to propagate information about SPA insertion or removal), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_RRW_UNLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server failed to release rrw lock to the request record area in shared memory. This is a fatal error, the process will automatically restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
flash_platform-3-DEVCTL_CALL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Device controller opens the device to get the partition information. Among the partitions, it needs stale byte information of the device. When Device controller unable to call this error message will occur.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-IFNAME_LOOKUP_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A system error was encountered when performing normal, ongoing operations. In rare circumstances, this may result in unexpected behaviour in the impacted process or unexpected restart of said process.), (Recommended Action: If unexpected behaviour is seen, the system may be recovered by restarting the impacted process on the affected node. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_0_OFLOW_FIA2BR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-0 FIA to bridge instance-0 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_EA_OOR-4-IFPBR_CHKP_OOR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Number of interfaces with a pbr policy has reached > 80% of the internal checkpoint database capacity.), (Recommended Action: Reduce number of interfaces with a pbr policy)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-6-UPD_GEN_THROTTLE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-BCDL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when FIB tried to communicate with BCDL, which is the mechanism via which route updates are propagated. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPENET-3-INVAL_MEDIA_RATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: When performing an MDI read to the PHY over the PCI bus, the returned value indicated an invalid media rate (speed).), (Recommended Action: No end user action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_PON_RESET_START
### Response:
(Severity: 5), (Category: PLATFORM), (Description: An ASIC error has occured and need power on reset, this mark the beginning of it.), (Recommended Action: *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-2-SPA_FPGA_IMG_ERR
### Response:
(Severity: 2), (Category: L2), (Description: The FPGA is running rollback image, this could be caused by previous FPD failure. %s - device name, Rx MAC or Tx MAC.), (Recommended Action: Check if the previous FPD failed. Upgrade the FPGA with FPD CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NCS4K_4H_OPW_QC2-4-CDR_REPEATER_MODE_STATUS
### Response:
(Severity: 4), (Category: PLATFORM), (Description: CDR Repeater Mode Status), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-BAD_REQUEST
### Response:
(Severity: 7), (Category: HA), (Description: A bad message request was received by the event handler function.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_NETIO-4-DEBUG_REG
### Response:
(Severity: 4), (Category: L2), (Description: It was not possible for the Ethernet slow path support to initialize its debugging support. Some of the output from <CmdBold>debug ether-netio<noCmdBold> output may be incomplete.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_LIB-3-SERVICE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The SVII Adjacency Manager encountered an error while preparing to set up adjacencies for the specified service. It is likely that packets will not be forwarded to interfaces for that service. This may be caused by a lack of resources or other system problems. Restarting the 'svi_adj_mgr' process on the affected node (after any other problems have been cleared up) will restore adjacencies for the affected service.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-CURRENT_MAXIMUM_HIGH
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: New current maximum is larger than the absolute max.), (Recommended Action: Use a current maximum value which is lower than the abosulte max value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-7-CE_SWITCH_DBG_SCRIPT_COMPLETED
### Response:
(Severity: 7), (Category: DIAG), (Description: Its just a debug diagnostics message. Collection of diagnostic reset debug log has been completed sucessfully and it will be stored at below location. /harddisk:/diag_debugs/node<R_S_CPU0>.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-3-NON_FATAL_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: QFP-CPU Bridge detected a non-fatal error.), (Recommended Action: Save log file and report this error. If the issue persists, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-SRGB_ALLOC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The allocation of segment routing global-block label range has failed and will be retried. The failure is likely due to a mis-matching or conflicting or overlapping range configuration across different protocols or instances. The SR feature will not work under the particular OSPF instance until this configuration issue is resolved.), (Recommended Action: Fix the configuration such that there is no overlap or conflicts between the SRGB range configured under the global segment-routing mode and/or the individual protocol instances for OSPF/ISIS. The allocation would be retried forever and SR feature working will recover post correction of the configuration. Check show ospf CLI to know of SRGB allocation status.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-PUNT_RDY_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver detected a PUNT ready error (ack not received).), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-WARN_MESSAGE
### Response:
(Severity: 3), (Category: L2), (Description: A non-fatal condition occurred in the CPP driver that may affect the functionality of CPP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-MSG_ATTACH
### Response:
(Severity: 3), (Category: OS), (Description: An internal Event Manager function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-MATCH_TYPE_IN_ACL_NOT_SUPPORTED_DEFAULT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The match criteria specified is not supported in the default key definition for this type/direction of ACL.), (Recommended Action: Remove the match criteria from the ACL and re-apply or define a UDK (User-Defined Key) for this ACL type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-BAD_MODE
### Response:
(Severity: 3), (Category: LICENSE), (Description: An invalid entitlement enforcement mode was received by the smart agent in the process of logging a syslog message.), (Recommended Action: This is a Smart Call Home internal error. Please report this to Cisco)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHUNK-7-SIB_INDEX
### Response:
(Severity: 7), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MIN_LEN_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error FIA 11 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does a DIS (Designated Intermediate System) get elected in IS-IS?
### Response:
A DIS is elected on broadcast networks based on highest priority (default 64). If priorities are equal, the highest SNPA (Subnetwork Point of Attachment), usually the MAC address, is used as a tiebreaker.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-RCFG
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error has occurred while processing the attachment of a service to an interface remote to this node. Packet diversion may now be inconsistent on this node. The error string will give more detail on the type of error that has occurred.), (Recommended Action: For non-resource errors, removing and adding back the configuration that prompted the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_THREAD_ATTRIBUTE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while setting the thread attribute during the process initialization sequence. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-RESMGRATTACH
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to attach to parser resource manager failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDP-3-NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the UDP process try to request more memory. The requested operation by udp could not be accomplished because of a low memory condition.), (Recommended Action: In the problem recurs, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-UBLAZE_CPU_HOG_RESET
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC FPGA is indicating that it has performed a CCC COLD RESET operation to recover from a persistent MicroBlaze CPU hog condition.), (Recommended Action: If this condition happens, it should indicates some sort of firmware bug in CCC FPGA that need to be addressed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-LWM
### Response:
(Severity: 3), (Category: MGBL), (Description: The LWM api call failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-EDM
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFM encountered edm error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-TOP_MEMORY_USER_INFO
### Response:
(Severity: 6), (Category: HA), (Description: This process is one of the top memory users in the system. If the system reaches critical memory exhaustion, this process is subject to restart or termination. If the process is listed as 'Killed', then the system is in the process of recovering the resources used by the process.), (Recommended Action: Collect system log information. Contact technical support if the problem is not a misconfiguration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VTY-3-OPERATION
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server has asked the VTY DLL to perform an unexpected or incorrectly defined operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-SPAOIR_REG_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to failure on registering SPA events. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-PHY_RAM_CHECK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Uncorrectable ECC error is detected on the PHY.), (Recommended Action: The card needs to be RMA'ed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-2-ITEMSIZE
### Response:
(Severity: 2), (Category: ROUTING), (Description: An item was not added to LSP since it exceeds lsp-mtu limit. This problem can happen if lsp-mtu is configured smaller than 255), (Recommended Action: Increase lsp-mtu in ISIS configuration)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-PLANE_MISMATCH
### Response:
(Severity: 3), (Category: SECURITY), (Description: The username has to be unique across the Admin and LR plane.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-FM_REGISTER
### Response:
(Severity: 3), (Category: OS), (Description: An internal fm_register function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_RIB-3-PURGE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv6_rib_purge_protocol.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_FAB_LICENSE-2-RSP3L_FAB_LIC_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: hw-module high-bandwidth is configured without having valid A9K-RSP440L-ALIC license for the box. This license is per RP based. Feature will not be activated without valid license(s).), (Recommended Action: 'Contact Cisco to purchase A9K-RSP440L-ALIC license. In case of standby bootiing in progress, this message cane be ignored safely if valid license available for both RPs')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-BAD_CONFIG
### Response:
(Severity: 3), (Category: L2), (Description: Invalid configuration has been incorrectly applied. This can potentially indicate a recent change in acceptable configuration values, or an internal fault.), (Recommended Action: Check that all configuration is within the acceptable ranges for the current version of the software and the installed hardware. If the error persists, and all values are within range, copy and save this message, and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_EGR_Q_ERR_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-POWERDOWN_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the node will be reset because user has administratively 'power disable' or 'no power disable' the node.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PFI-3-NODE_COUNT_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This error is an internal infra error and when critical is handled accordingly in the code. The context of the error is provided in the actual code where this error is used. If this error is seen persistently initiate the recommended action.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPA_BRIDGE_UPDATE
### Response:
(Severity: 4), (Category: L2), (Description: Failed to update the QFP SPA bridge controller client about the SPA bridge controller initialization), (Recommended Action: When errors occur in jacket, it is very likely the jacket process will restart itself)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AVPAIR-6-ERR_BAD_AVLIST
### Response:
(Severity: 6), (Category: OS), (Description: An illegal attempt to use an uninitialized avpair list), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-7-ERR_MSG
### Response:
(Severity: 7), (Category: ROUTING), (Description: The process failed to read the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-AD9554_SERDES_CLOCK_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AD9554 backplane serdes clock failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-FAILED_CALL_PLATFORM_RELOAD_NODES_SPECIFIC
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install manager needs to call the platform API to reload the ndoes listed, in order to complete the parallel install operation. The platform call failed, so the user will have to manually reload each node, by calling reload location <loc> from admin mode), (Recommended Action: Reload each node in the list manually from admin mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP for MPLS TE fast reroute in Cisco IOS XR?
### Response:
To configure RSVP for MPLS TE fast reroute, use the 'mpls traffic-eng fast-reroute' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#mpls traffic-eng fast-reroute
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-6-PARSE_INFLOW_CONFIG
### Response:
(Severity: 6), (Category: OS), (Description: An internal error was detected when trying to parse the input flow configuration file.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_LOSS_OF_SYNC_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on NPU-1 interface on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD-4-INVALID_FIND_SERVICE
### Response:
(Severity: 4), (Category: SERVICES), (Description: The Service Director received a batch with an invalid service type field. This can be due to message corruption, or due to a timing issue but is most likely due to an error in a service process. Except in the latter case (when it will most probably be repeated) this error is not fatal.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-HW_OQ_FULL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects OQ_FULL and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-6-MASS_WITHDRAW_TRANSMITTED
### Response:
(Severity: 6), (Category: L2), (Description: EVPN: Transmitted mass withdraw indicator.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-INIT_BPID_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath encountered an initialization error A reason text will be supplied to describe the error. This error could occur for two reasons. 1. The system is low on resources. 2. A hardware or software error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-2-EVM_CREATE_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EVM create failed, Eth server will be restarted to recover from this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKFILEMIB-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: SNMP), (Description: No memory in the process.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB-7-ERR_EVM_NOTIFY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Arbiter driver Event Manager notify error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of 'install clean' in Cisco IOS XR?
### Response:
The 'install clean' command in Cisco IOS XR is used to remove unused software packages and free up disk space, helping to maintain the router's storage efficiency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'apply' command in an RPL policy statement?
### Response:
The 'apply' command allows a policy statement to call another policy as a subroutine. This enables modular construction of policies and reuse of common policy fragments.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_ISSU_SANITY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error during sanity test of the ISSU received event), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_7_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power greater than or equal to the high Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_DLL_UNKNOWN
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The nvgen try to load an unknow dll in the specified tree'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-INVALID_NUM_ENTRIES
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: invalid entry count sent from LPTS PA to LPTS FM), (Recommended Action: Invalid entry count received on LPTS FM. This is critical if the error persists. Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-7-MEMORY
### Response:
(Severity: 7), (Category: INSTALL), (Description: There is not enough memory to continue with current operations.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-1-INVALID_CPU_ACCESS
### Response:
(Severity: 1), (Category: PLATFORM), (Description: ZEN invalid CPU access error detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as attach point data was being created. This could cause problems with future configuration attempts, and it does indicate an internal inconsistency so it might be best to restart the policy_repository to try to clear this inconsistency.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-INTF_SET_ADD_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected software error occurred whilst trying to add an interface to the specified collection of interfaces. This is most likely to be due to a low memory condition, but may be an internal software programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-INVALID_SWITCH_TYPE
### Response:
(Severity: 3), (Category: INFRA), (Description: Indicates that MLAP process is running on unsupported node/card_type.), (Recommended Action: Determine the board type (version/revision) to make sure that its of supported HW. If this is a supported type, then root cause has to be determined.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CARD_SHUTDOWN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has failed to power down the specified node..), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_0_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-MMAP_MAGIC_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Mapping magic number is invalid.' 'spoofer process will exit with failure'), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-SHMEM_UNLINK_FAIL
### Response:
(Severity: 3), (Category: L3), (Description: The IPv6 Neighbor Discovery (ND) spoofing process (ipv6nd_lite) has failed to delete a shared memory region used in communication with the main ND process (ipv6_nd). This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart.), (Recommended Action: Check that the ipv6nd_lite process is running and restart it if necessary. Look for other error messages that may help explain the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA-4-WARN_INVALID_ADDR
### Response:
(Severity: 4), (Category: L2), (Description: The batch of available MAC addresses supplied is invalid. A zero size range will be used, resulting in any MAC address requests from client features being rejected unless any valid MAC addresses are configured.), (Recommended Action: *DDTS*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-3-BAD_ACTOR_MAC_NOT_CLEARED
### Response:
(Severity: 3), (Category: OS), (Description: The punt flow trap failed to completely clear the hardware settings for the 'penalty box' for the above specified interface which is using more hardware resources (i.e Bad Actor). Traffic from this source MAC may be affected. When a flow through any interface is trapped, it is tagged as a Bad Actor and will be added to 'penalty box', this box will restrict the traffic through that interface by applying penalty policing.), (Recommended Action: If traffic from the source MAC is affected, try flapping the interface or reloading the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-BAD_PEER_MTU
### Response:
(Severity: 6), (Category: L2), (Description: The remote peer has set the MTU in its Local Information TLV to a value lower than the minimum OAMPDU packet size. Since the MTU must be larger than the minimum size in order for the OAM PDU to have been received, the value from the peer will be ignored & it is assumed the locally configured MTU should be used.), (Recommended Action: If the peer supports the same MTU as the local device, operation should continue without interruption, otherwise the session may go down. The message indicates either: 1. An error in the peer implementation of the protocol 2. Packet corruption between the two devices Check the packet contents of packets coming from the peer device to confirm the MTU that is sent from the peer & received on the local device. If the packet never has a valid MTU, contact the relevant support team for the peer device. If the packet has a valid MTU when leaving the peer device Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TABLE_EMPTY
### Response:
(Severity: 3), (Category: OS), (Description: Query returned table empty.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-ALARM_CLEARED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Alarm cleared received from Roulette, condition has alleviated.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-LOCAL_LABEL_CONFLICTS
### Response:
(Severity: 4), (Category: ROUTING), (Description: When FIB receives a conflicting route update that binds a local-label with a FEC (IP Prefix, Label Xconnect) different than current FEC, it saves this route update in its corresponding IPv4/IPv6 label-conflicts database instead of dropping it. Later upon, producer end-of-download, the entries in this database are retried as an update in case the source of conflict is removed or updated. Moreover, this database is also retired every 15 seconds on a retry timeout. Ideally, this database is added to handle race conditions and hence it might get populated temporaraily but then should become empty again. However, if this database remains populated (non-empty) for longer time with 1 or more entries, it indicate a real LABEL-RECYLE issue that needs to be looked at. This ios-msg is used to alter an operator regarding such a conditionn.), (Recommended Action: Please execute following command to find the conflict and source of conflict: <CmdBold> show cef %s local-label conflicts detail location <node> <NoCmdBold> For a given local-label of interest, execute following commands to find the current route and source of label: <CmdBold> show mpls forwarding labels <label> detail location <node> <NoCmdBold> <CmdBold> show mpls label table label <label> detail <NoCmdBold> Please collect the tech-support for the relevant route sources involved in the label-conflicts as deduced from the above commands. Moreover, please provide details of the router configuration, and output of system log. Also provide output of the following command from the node where the problem has occured: <CmdBold> show cef %s local-label conflicts detail location <node> <NoCmdBold> <CmdBold>show tech-support cef ipv4 detail location <node> file <ipv4_file><NoCmdBold> <CmdBold>show tech-support cef ipv6 detail location <node> file <ipv6_file><NoCmdBold> <CmdBold>show tech-support cef mpls detail location <node> file <mpls_file><NoCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_CHAN_SYNC_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 chan sync error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_AMCC2035-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Ether-Ctrl process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ether-ctrl location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK bias greater than or equal to the high bias warning threshold. The CPAK is the pluggable optics on the line cards. The bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-UNABLE_TO_WAIT_FOR_INTERN_EUSB
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Inform mediasvr about intern eUSB. If it unable to wait for intern eUSB then this message will gets printed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-WRITE_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be read, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-EMPTY_SERIAL_FAIL_BOOT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Shelfmgr is failing a boot request because the serial number string in the boot request is empty. This happens if a RP with ROMMON 1.19x or older is sending a boot request.), (Recommended Action: Please upgrade the booting RP to the latest recommended ROMMON.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR1_INTR_ACCPT_TBL_DROP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR1_INTR_ACCPT_TBL_DROP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-7-SYSDB_INIT
### Response:
(Severity: 7), (Category: IP), (Description: An software error occured when the L2SNOOP process try to do initialization related with sysdb process.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-5-SC_DATATYPERET
### Response:
(Severity: 5), (Category: SYSDB), (Description: The datatype returned by SysDB does not match any of those expected by Sysdbcon. This is probably because the type is missing in Sysdbcon.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-SHM_POOL_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Shmwin server failed to create pool of elements), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-CFGMGR_CONN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: drp_pairing process connection with config manager got failed. Software will automatically do recovery by restarting the drp_pairing process.), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-6-NO_BUF_TO_REPLACE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPUCTRL RX PDMA ring could not replace the buffers, possible low buffer condition.), (Recommended Action: If the message is displayed continuously for just a short period of time, it is likely a temporary condition that RX PDMA Ring is out of buffer. Use command 'show packet-memory inuse summary' to check which process holding most of the packets and restart the process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HW_MODULE_PATCHCORD-6-PC_CREATE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Logical Patchcord has been successfully created. This log message is needed to trigger EPNM reactive inventory about logical patchcord creation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-INTERNAL_STATE
### Response:
(Severity: 7), (Category: SYSDB), (Description: The server has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-ARRAYTOOBIG
### Response:
(Severity: 7), (Category: MGBL), (Description: The number of elements entered by user in an array are more than this application is designed to handle.), (Recommended Action: * RECUR *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-CHKPT_TBL_REMOVE
### Response:
(Severity: 7), (Category: SERVICES), (Description: Failed to delete a record from the given checkpointing table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates bind to the specified path failed. Inventory information would be incomplete. This would affect information provided to CLI 'show inventory', inventory schema, and the entity related MIBs. %s - indicates the internal error reason.), (Recommended Action: Try restarting the invmgr process via CLI 'process restart invmgr' to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-ASYNC_SEQNO_MISMATCH
### Response:
(Severity: 3), (Category: IP), (Description: The socket library has encountered an error while operating on ASYNC sockets. This could place the system in an inconsistent state.), (Recommended Action: The process will try to recover by closing the session. The required_info has to be collected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-PROCESS_INGRESS_BUFFHDR_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Failed to process the ingress packet header.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-IFH_UIDB_INDEX
### Response:
(Severity: 3), (Category: OS), (Description: It is likely to be caused by a programming bug or a programming problem happened in the past. The message frequency depends on the protocol for which programming takes place.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-QCR_MEM3_MBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR MEM3 Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_PATHCREATE
### Response:
(Severity: 4), (Category: SYSDB), (Description: When combining the path supplied with the path Sysdbcon is currently bound to an error occurred. This could be because the path created would be invalid.), (Recommended Action: Check that the combination of paths is valid. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERRRATE_EXCEED_NO_LIMIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The fabric driver encountered the annunciated error. Sysmgr will reload the node up to a fixed number of times the error is encountered, to recover. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC_BFD_SESSMGR-4-UNSUPPORTED_INTERFACE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The nexthop is resolved over an unsupported BFD interface.), (Recommended Action: Pick different nexthop to create the BFD session.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-UNSUPPORTED_INTERFACE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The nexthop is resolved over an unsupported BFD interface.), (Recommended Action: Pick different nexthop to create the BFD session.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-3-NOT_IN_FCM
### Response:
(Severity: 3), (Category: LICENSE), (Description: SLR is availabel only for FCM license.), (Recommended Action: The customer should enable FCM.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-RAW_SEGMENTS
### Response:
(Severity: 7), (Category: HA), (Description: Unlink of shared memory raw segments failed. No impact on process.), (Recommended Action: Process restart will resolve issue. Raw segments are not being used so we can ignore .)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LNS_EA-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-RELIABILITY_STATUS_ENQ_TIMEOUT
### Response:
(Severity: 4), (Category: L2), (Description: The Polling Verification Timer has timed out because no STATUS ENQUIRY message has been received in the configured interval.), (Recommended Action: Check the Polling Verification Timer value configured is greater than the Polling Timer value configured on the peer device. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-GROUP_MSG_SHORT
### Response:
(Severity: 4), (Category: ROUTING), (Description: A 'who has this' dll message was shorted than its content implied. This indicates either a corruptions of the message itself or a failure of the client to build the message correctly.), (Recommended Action: Observe system for other failures contact support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEV_EUSB0_NOT_RESPONDING
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EUSB0 device not responding), (Recommended Action: Please attempt the following: If dual RSP, and the problem is on the active RSP, issue 'redundancy switchover' If the problem is on the standby/simplex RSP: Restart low level usb driver via ksh, 'kill io-usb_pid' Failing which, Restart usbstack 'process restart umass-enum' Failing which, Reload RSP If problem persistes, replace EUSB devices If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-PORT_BASED_MACSEC_RESOURCE_LIMIT
### Response:
(Severity: 3), (Category: L2), (Description: MacSec Sessions(p2p) / Peers(p2mp) are limited by physical port type Ex: TenGigE(5), FortyGigE(21), HundredGigE(42)), (Recommended Action: Disable and Enable macsec after reviewing the MacSec network topology)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-MORETHANONE_CPUTUNES_CONFIG
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting more than one CPU tunes parameter.), (Recommended Action: Use a different valid machine definition file for the virtual service. If the problem persists, then enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install remove command in IOS XR?
### Response:
The 'install remove' command is used to delete inactive packages from the router's storage. This helps to free up disk space. Only inactive packages can be removed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-CE_SWITCH_LPBK_TEST_FAILURE
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostic control ethernet switch loop back ping test for inter and intra rack has detected an error. The diagnostic software attampts to reload the RP/SC node after three consecutive test failures during second iterations within threshold period of one hour.), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-4-MODULE_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: 'Either a feed voltage out of limits warning, unit in current/power limit or over temperature warning condition.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-SUFFICIENT_RACK_POWER
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that power budget is now sufficient for rack power.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-FALLBACK_SWTAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: tamsvcs process failed to fallback to swtam mode.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-XFP_ALARM
### Response:
(Severity: 4), (Category: L2), (Description: XFP hit alarm condition and raised interrupt.), (Recommended Action: None. Software will dampen the interrupt for 5 seconds to attempt recovery.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-BAG_REGISTRATION
### Response:
(Severity: 3), (Category: HA), (Description: LRd was unable to register bag structures.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_12_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-4-GIBRALTAR_A1_RECOVERED_PRESENT
### Response:
(Severity: 4), (Category: FABRIC), (Description: Gibraltar A1 ASIC has a recovered version(A1_R). Recovered asics might have serdes link issues.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPPHA-3-FAULT
### Response:
(Severity: 3), (Category: L2), (Description: A CPP HA failure has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-6-LINK_RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The PCIe link has been reset. This corrective action is triggered by a fatal error on the PCIe bus. The device driver will usually participate in the effort of restoring the device after the link reset. If this message is not seen again and no other adverse effects are observed then it means that the link reset is successful. Otherwise, take the following action, *SUPPORT*), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-4-MIN_REV
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Currently running FPD version meets the minimum software version required for the image, but a higher version FPD is available in the image and can be upgraded using 'force' CLI option.), (Recommended Action: tech support should be contacted for upgrade instructions)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-2-MODULE_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Either an internal PEM error, an over voltage/current/temperature shutdown or an external input feed error.'), (Recommended Action: Try restarting the using CLI command in exec mode - process restart pwr_mgmt If the error exists try -insert and re-insert the PM If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-GCS_MAC_INSTALL_QUEUE_RECOVERY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MAC install queue recovered after previously stalled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_REGISTER_OK
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-OOO_INGRESSQ_HW_ENT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Error occured while getting start address for bar_Crab/Sponge/Crab instance 0 given node ID.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP Rx power greater than or equal to the high Rx power warning threshold. The XFP is the pluggable optics on the line cards. The Rx power threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_INFO_PRM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, PRM error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-4-CFG_SIZE_CRIT
### Response:
(Severity: 4), (Category: SYSDB), (Description: The message to the user to indicate that the requested config size excceds the critical system memory limits and the config request will be allowed to proceed), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_EGR_Q_ERR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_GET_SIGNATURE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not get a required string representation of signature of this file, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-MILESTONE_COMM_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: ISSU Lite returned an error when the process tried to inform it that the a milestone had been started/met. The error messgage will contain more information. This may stop the process from declaring itself ISSU ready and may cause the ISSU to abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_2_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-SVC_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information. %s - is the debug message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'neighbor' command in IOS XR VPLS configuration?
### Response:
The 'neighbor' command is used under the 'l2vpn bridge group' to specify the remote PE routers that are part of the VPLS instance. It defines the pseudowires that connect the local PE to the remote PEs. Each 'neighbor' statement creates a spoke pseudowire to a remote PE.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-UNEXPECTED_MSG_TYPE
### Response:
(Severity: 7), (Category: SYSDB), (Description: We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NFEA_HW_PROG-7-ERR_MSG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: During initialization, an internal error occurred in Netflow which involves exiting the process.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-4-EXIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to notify the system manager that it was exiting. In very rare cases, this could result in the process not being restarted when it ought to be.), (Recommended Action: If the process in not running and it ought to be (ie, there is G.8032 configuration remaining), then remove all G.8032 configuration, commit this change, then re-apply the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER_SNAP-4-NODUMP
### Response:
(Severity: 4), (Category: OS), (Description: A non-invasive voluntary coredump was requested by the process, and was within the configured rate-limit, but a problem occured that prevented the coredump from being created.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-0-FAULT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This fault message will be seen when: 1. Graceful shutdown is requested for card as part of shelf_mgr fault handling. 2. Forced shutdown is requested for card as part of shelf_mgr fault handling. 3. Graceful reload is requested for card as part of shelf_mgr fault handling. 4. Forced reload is requested for card as part of shelf_mgr fault handling. 5. Graceful shutdown is requested for whole rack as part of shelf_mgr fault handling. 6. Forced shutdown is requested for whole rack as part of shelf_mgr fault handling. 7. Graceful reload is requested for whole rack as part of shelf_mgr fault handling. 8. Forced reload is requested for whole rack as part of shelf_mgr fault handling.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-2-FABRIC_INTERNAL_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric encountered internal fabric link fault and is bringing interfaces down to isolate fabric slice.), (Recommended Action: Fabric encountered internal fabric link fault and is bringing interfaces down to isolate fabric slice on the linecard. Try reloading LC and if the issue recurs then RMA the card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_SIS-3-ERROR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Service Interface Server encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-OPERATION_RELOAD_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: The router needs to reload in order to use the newly installed software. However the automatic post-install reload could not be initiated.), (Recommended Action: Check the shelf_mgr process to make sure it is up and running properly. Check the general state of the VM to see if anything may be causing reload not to happen for Install. Collecting show tech will help further investigation on the cause. Please manually reload the router using 'hw-module location all reload' in order to complete the install operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_EXTRACT_OBJECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to extract object from sync. The object printed in the message was not able to be synced to the standby RP. The standby RP is now out of sync with the active RP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The user may restart te_control on the standby RP and see if this error message appears again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-OCT_RDY_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver detected a crossbar fabric interface ready error (ack not received).), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEV_EUSB1_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: USB device 1 transaction is taking excess time.), (Recommended Action: The USB device 1 requires immediate service. Please attempt to restart the hd_drv process using command: 'process restart umass-enum'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-6-INFO_LOCKING_CONTEXT_DISPLAY
### Response:
(Severity: 6), (Category: ROUTING), (Description: Display a single entry of locking context information. The cause of this informational message should be evident from the context in the log.), (Recommended Action: *DEBUG*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-CHKPT_SESSID
### Response:
(Severity: 4), (Category: L2), (Description: The SPAN Manager encountered an error while trying to restore its database from checkpoint. The checkpoint database is used to ensure that internal session IDs are persistent across process restarts. This failure indicates that there is a problem with the table. The table will be deleted, potentially leading to a brief interruption to replicated-traffic-flow when the process restarts, but SPAN should otherwise continue to operate as normal. Standard forwarding will not be affected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_EXTRACT_FIELDS
### Response:
(Severity: 7), (Category: OS), (Description: Failed to extract rack/slot/instance fields), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-RACK_NOT_BOOTED_UP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that there is no rack serial ID to rack number mapping configuration and a rack is trying to boot.), (Recommended Action: In admin configuration mode, please configure rack serial number to rack number mapping using the below command: <CmdBold> dsc serial <serial number> rack <rack number> <NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-FAULT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Network Processor Experienced a Fault condition that has been self-recovered from. If this condition persists or occurs frequently, line card is deemed unhealthy.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-5-ERR_CONT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates an error occurred beyond which execution of the bpe_driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-3-AIB_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The C-shim Partner initialization failed while trying to connect to AIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-PLL_T0_STATE_FREERUN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the T0 PLL output is free-running.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_THREAD_JOIN
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to pthread_join failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB_DEBUG-6-TERM_ERR
### Response:
(Severity: 6), (Category: ROUTING), (Description: Internal non-serious error. MLIB debug library termination failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IP_EA-3-ERR_INFO_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails due to failure during forwarding feature programming. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_3_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON-3-PM_HEARTBEAT_MISS_RESTART
### Response:
(Severity: 3), (Category: INFRA), (Description: Sysadmin Process Manager liveness check failed and was restarted to recover the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-SIGALRM
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: An unexpected signal SIGALRM was received.), (Recommended Action: If any of these messages occur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_CRC_TRANS_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_CRC_TRANS_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-6-MP_INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the PSE Driver to indicate an event on maintenance processor.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SHMEM_CLIENT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal Error: Shared memory client error description.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-ERR_HW_SHUTDOWN_PORT
### Response:
(Severity: 3), (Category: L2), (Description: A hardware error is detected on the PLIM. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause shutting down the port. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error. Recommended user action: %s - recommended action to the user. Possible values: 'none' 'replace Optics' 'PLEASE MANUAULLY RELOAD THE LC AT NEXT MAINTENANCE WINDOW'), (Recommended Action: Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AMT-3-SYSDB_REG_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-QDR_M_WR_ERR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multicast write when free page fifo empty on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_RP-3-LTRACE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G709-4-ERROR
### Response:
(Severity: 4), (Category: L2), (Description: The dwdm encountered an error that would lead to degraded service.), (Recommended Action: Check for HW-config value and hard-disk state. No action required, if the hardware configuration is PRP-3 having no physical hard-disk present on the PRP-3 board. In case, the above requirement do not meet, please contact TAC, not otherwise.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-7-TTY_INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: The TTY Server unable to access the TTY db for the given ttyid state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_ROUTING_GLOBAL_ENABLED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'OSPF routing has been enabled globally'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPENET-3-NO_PHY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PHY device was not found during the scan, this is a hardware related issue), (Recommended Action: Please try to OIR the card, if still problem persists contact support to RMA the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-4-DAEMON_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The Ethernet Link OAM Daemon failed to cleanup correctly. It will exit anyway, and no further errors should be seen.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-IMDR_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A failure occurred when interacting with IMDRs. An IMDR operation in progress may be aborted or may not complete sucessfuully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: L2), (Description: An internal error was detected. There are several scenarios which can cause this error condition. Error message describes the cause. Some of these error conditions are serious and result in driver process restart, e.g. ASIC Init/remap, enable/disable failure. Following are some of the reasons for this internal error: 1) Obsolete API usage, it can be caused due to uncompatible component installed in the system. 2) Interface creation failed due to egressq port creation failure. 3) Can't map Interface handle to egressq port, it could be because of: a) Invalid interface handle passed. b) Internal interface to port mapping table is corrupted. 4) Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted. 5) Egressq Group/Queue creation/ deletion failed. 6) ASIC enable /disable failed.), (Recommended Action: No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-SERVICE_INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Initialization of above service failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-3-DIAGFAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Packet server internal structures are misaligned. This is a fatal programming error. The value is a marker for tracking down the misalignment. Please report the message and value to your technical support representative.), (Recommended Action: Call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-5-PLL_T4_STATE_FREERUN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the T4 PLL output is free-running.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-2-FAILED_ALLOCBUFF_HWQUEUE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Eth server failed to alloc buffers while Initializing buffer descriptors. This indicates memory failure during initialization and due to low memory on node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-CARD_TAM_VERIFICATION
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC driver was not able to validate PID details from ACT2 chip from the indicated card. This failure will prevent registration of detail card information to the system inventory. The card will be powered off due to this failure.), (Recommended Action: Use <CmdBold>hw-module location<noCmdBold> <CmdArg>location<NoCmdArg> <CmdBold>reload<noCmdBold> command to reset the card to see if it can clear any I2C issue that was preventing the reading of the ACT2 chip contents. If the problem is due to CCC FPGA not ready as indicated in the error message, then there is some HW issue that is preventing CCC FPGA from booting. If <CmdBold>hw-module location<noCmdBold> <CmdArg>location<NoCmdArg> <CmdBold>reload<noCmdBold> command cannot reset the card, try to physically OIR remove and then insert the card to see if CCC FPGA will boot. The status LED should turn on to solid yellow color when CCC FPGA boots.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-6-INFO_REDIRECTS_SECONDARY
### Response:
(Severity: 6), (Category: IP), (Description: If a host uses HSRP secondary addresses, HSRP filtered ICMP redirects may be ignored by the host (depending on the host implementation).), (Recommended Action: Try to avoid using HSRP secondary addresses when HSRP filtered ICMP redirects are enabled.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CFG_XC_MEP_CREATE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to create new cross-check MEPs This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some cross-check MEPs will not have been created.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_ERR_CFEC_HDR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-6-ASYNC_INVALID_SESSION
### Response:
(Severity: 6), (Category: IP), (Description: The socket library detected pulse handler was called with invalid session id, and it couldn't identify the session. This can place the process in an inconsistent state. The problem manifests, typically, during low memory conditions, so it is important to check for any widespread issues in either the system or the process state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPA_BRIDGE_CONFIG
### Response:
(Severity: 4), (Category: L2), (Description: Failed to configure attributes on a SPA bridge controller), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_MTA_FRM_TYP_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered interlaken Rx serdes lane metaframe type error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_CLIENT-3-BUF_TOO_SHORT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Whilst trying to format a string, the buffer passed in was too short and the string was truncated.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INIT
### Response:
(Severity: 3), (Category: INSTALL), (Description: An error occurred during initialization, causing the process to terminate.), (Recommended Action: Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-TCAM_FATAL_INT_CASE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Unable to handle the interrupt. too many tcam parity errors.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-NO_RECORD_FOUND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr failed to find formated record. This may be a program level error.), (Recommended Action: Provide the required information to support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_31
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_HT1_CHAIN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected an HTDP chain error on the HT1 interface. This is logged when the HT interface received a sync flood or when HyTop drives a sync flood.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR0_INTR_FIFO_ORUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR0_INTR_FIFO_ORUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HSRPMIB-4-WARN_NOTIFY
### Response:
(Severity: 4), (Category: SNMP), (Description: During initialisation of the HSRP MIB, it was not possible to register to be notified of changes in active state of an HSRP group. The MIB will continue to function, but no traps will be generated for the cHsrpStateChange notification.), (Recommended Action: Restart SNMP. This will re-initialize the HSRP MIB. If the problem persists, do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SAVE_SEGINFO_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Core dump failed because the saving segment info failed.), (Recommended Action: Collect the following data and raise DDTS. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-6-CHKPT_CLIENT_REG
### Response:
(Severity: 6), (Category: OS), (Description: Status information while registering checkpoint client.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-BULKSTATOID_NOT_FOUND
### Response:
(Severity: 4), (Category: SNMP), (Description: The snmpd process attempted to load the bulkstat OID, but the OID did not correspond to any known MIB module.), (Recommended Action: It could be that either - 1. the OID is of the format 'foobar.1', but the MIB module containing the OID 'foobar' is not yet loaded on the router. If this is the case, when the MIB is loaded, this command will be automatically applied - there is no need to re-enter it. 2. The MIB module containing the OID 'foobar' is indeed loaded, but the MIB did not load a translation from 'foobar' to '1.3.6.1.x.y.z' (i.e. there is no translation from the oid-name to the dotted decimal representation for that name). In this case, you can enter the dotted decimal version instead of the name, i.e. 'add 1.3.6.1.x.y.z' - note that using the dotted decimal version of the name will ALWAYS succeed without a warning message - it is upto the user to make sure the OID entered is valid. 3. The OID 'foobar.1' contains a typo - please re-enter the command with the correct OID and it should succeed. If the above steps result in repeated warning messages or failure, please contact your customer support representative wit the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-SERDES_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter driver detected a serdes error), (Recommended Action: This is a transient error. If this error persists for a period of 60 seconds, please attempt to correct the error by reloading the card using the command: hw-module location <> reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MANSDORF-6-GENERIC_EVENT_FAILURE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A generic event failure logs in MANSDORF layer.), (Recommended Action: No action is required. This is info message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-BAD_IPC_LENGTH
### Response:
(Severity: 7), (Category: HA), (Description: An IPC message with invalid length was received by the proxy process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-3-INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: PM could not initialize one or more modules), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESSION_MON-4-DEBUG_ERROR
### Response:
(Severity: 4), (Category: SNMP), (Description: Error encountered in debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-OPERATION_COMPLETED_WITHOUT_ERROR
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified install operation in the message finished successfully. The operation will be a single command upgrade (install replace commit)), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-DEBUGDUP
### Response:
(Severity: 4), (Category: SNMP), (Description: The given MIB attempted to register for MIB debug handling more than once. This is an internal software error. It may not have a detrimental effect on the behavior of the SNMP agent.), (Recommended Action: Restart snmpd process.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-3-EVENT_CONN
### Response:
(Severity: 3), (Category: SNMP), (Description: An internal operation failed. The system will attempt to recover.), (Recommended Action: Copy the message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_DRV-3-UNRECOVERABLE_BUS_HANG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The attempted I2C bus hang recovery was not successful.), (Recommended Action: Physically OIR the board which is having the problem. If the error occurs even after physical OIR. Please collect required_info log/trace and contact Cisco technical support representative with required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-GROUP_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you enable CDP on an interface in Cisco IOS XR?
### Response:
To enable CDP on an interface in Cisco IOS XR, use the 'cdp' command in interface configuration mode. You can also configure CDP timers and other parameters using the 'cdp' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-CARD_POWERCYCLE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Shelf Manager component has requested power restart on a line card or secondary RSP.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_TSB_LC-6-WARNING
### Response:
(Severity: 6), (Category: SECURITY), (Description: ACE TSB warning message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-node_insert_fail
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in inserting a node to a node state map.'), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-3-FWC_FWS_CFG_UPDATE_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: The Firewall Controller has been informed of an interface/firewall create/delete by the firewall application but has failed to update its configuration. This will have left the system in an inconsistent state.), (Recommended Action: Restart the Firewall Controller process using the 'process restart' mechanism, the firewall controller should resynchronise.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM_CLIB-3-MSG_MALLOC_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The process has failed to acquire the required amount of memory.), (Recommended Action: Restarting the process might help in recovering from error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-INSUFMEM
### Response:
(Severity: 3), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-EVM_CRE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospf_uv process was unable to create an event connection manager instance.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RRR_PCALC-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Allocation of memory failed.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between a hot, warm, and cold standby process?
### Response:
Hot standby processes are synchronized in real-time with their active counterparts. On failover, they take over immediately. Warm standby processes are not synchronized in real-time but retrieve checkpointed state
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ERR_ASIC_ACCESS_TIMED_OUT
### Response:
(Severity: 6), (Category: FABRIC), (Description: Sometimes, when the register access of the Sapir ASIC fails, read of any of its registers returns 0xdeaddead. Now if this happens when CIH is processing an interrupt, CIH would accidentally determine the source of the interrupt as Rx Snoop SRAM SBE interrupt. In reality, this interrupt is not even enabled by the driver. The Rx snoop SRAM SBE interrupt is obtained if we traverse the interrupt tree of the Sapir ASIC as given below: - Bit 0 of the top level CPU hierarchy interrupt is Rx block. - Bit 0 of the Rx block hierarchy is Rx block leaf interrupts. - Bit 0 of the Rx block leaf interrupts in Rx Snoop SRAM SBE.), (Recommended Action: If this condition is noticed for every access to the ASIC, then the ASIC is possibly wedged. Resetting the ASIC or reloading the fabric card will help to recover from this condition. Driver automatically tries recovering the ASIC via PON reset. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_SUBDB
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the SubDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SubDB server, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-4-UNRECOGNIZED_PROTO
### Response:
(Severity: 4), (Category: L2), (Description: Interface Manager notified LCP about a protocol that it doesn't recognize, either by sending a request to LCP to adopt this node or by informing LCP that it exists. This is a programming error as LCP needs to recognized all of the protocols which run above it in order to be able to run the relevant CP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-6-ERR_RACK_LEAD_PUBLISH
### Response:
(Severity: 6), (Category: TOPOLOGY), (Description: Could not publish the rack lead information using interface address.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_CARD_SES_THRESHLD_NO_EXCEED
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on the card is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-2-MAX_STORMCONTROL_BPORT_REACH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The Maximum number of storm control enabled bridge ports has been exceeded.), (Recommended Action: Check the running configuration and reduce the storm control enabled bridge ports. If this error messages are observed before reaching the maximum limit, report to your technical support representative for further assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-QUEUE_STUCK
### Response:
(Severity: 3), (Category: L2), (Description: Egressq driver detects the queue stuck condition (CSCsj48554). There is no packet output from one or more of the PLIM links and the queue length for related queue(s) is building up.), (Recommended Action: By default, driver will perform the asic soft reset after detecting queue stuck condition. If this message appears more than once in short period, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NQC-3-ISOLATION_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: RP Isolation failed on this node. Node will take the regular reload path.), (Recommended Action: No action is required on this. The NSR library is to trigger a switchover, but the RP Isolation path to switch-over failed and so the regular reload path will be taken and the node will be reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-SUPP_FAIL
### Response:
(Severity: 5), (Category: L2), (Description: Authentication was unsuccessful.), (Recommended Action: Recommended to check the configuration on both dot1x peers and connectivity between the authenticator and the AAA server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-SHUTDOWN_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: acctd process failed to shutdown properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_SHUTDOWN_LINK_ILITE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and cause ilte link shutdown.), (Recommended Action: An error that causes ilite link shutdown has happened and been handled Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-CONSISTENCY_CHECK
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal data consistency check failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng -show lmrib client trace for further analysis of the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-6-PROC_INFO
### Response:
(Severity: 6), (Category: OS), (Description: Procfind was unable to read the information for the specified process, and will therefore return incomplete results.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-DEBUG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered in debug module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-PATH_CHUNK
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an error associated with path memory allocation. No path chunk was found big enough to store the path with required bytes. BGP may not operate correctly.), (Recommended Action: Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-INV_REPLY_SIZE
### Response:
(Severity: 3), (Category: SYSDB), (Description: Header size of the reply message is not a valid value.), (Recommended Action: System will attempt to recover itself. If error still persists, contact TAC support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-SAT_REG_DSC_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to registration failure for DSC on satellite oir events. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-GST_PWM_TIMEOUT_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: GST PWM not received within 1 ms on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-MAP_TABLE_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'While registering with AIB. MAP Table failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_DPM-6-DISCOVERY_HEARTBEAT_MISSING
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The Discovery protocol requires a response to every heartbeat packet that is sent out. This syslog is output if the user has configured warning syslogs for a satellite. If the heartbeats continue to be missed, then the connection data to the satellite will be cleared and the session be re-established.), (Recommended Action: If making transport layer changes or re-configuring the satellite, then this syslog is probably expected and purely informational, so no further action is required. If unexpected, then check the transport layer between the host and the satellite and ensure that the satellite is working as expected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-MISC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS LDP autoconfiguration feature?
### Response:
The MPLS LDP autoconfiguration feature allows MPLS LDP to be enabled on interfaces automatically based on the presence of an IGP (OSPF or IS-IS). This simplifies configuration compared to enabling it explicitly on each interface. It is enabled with the mpls ldp autoconfig command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-OVERCOUNTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: A counter with maximum value was incremented.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MIN_LEN_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error FIA 01 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnetdscp-4-DSCP_SET
### Response:
(Severity: 4), (Category: IP), (Description: An error occured while trying to set dscp value to socket. Process will use default dscp value instead.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-PKT_DROPPED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Attach pkt dropped due to Tx failure. %s- Reason for the pkt drop.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_MACSEC-3-ERR_CONFIG_SAT
### Response:
(Severity: 3), (Category: OS), (Description: Macsec policy can be applied on a nV Satellite access port only when satellite is connected in Hub & Spoke Physical ICL topology.), (Recommended Action: Remove the Macsec policy, change the nV Config to H&S and apply policy over nV Satellite access port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-EIO_TRAIN
### Response:
(Severity: 2), (Category: L2), (Description: EIO training errors. The PLA EIO failed to train... this will result in traffic loss and the MSC will fail to send traffic thru the PLIM.), (Recommended Action: Currently, the only recovery is for an MSC reload. Once the Fault-Mgr is available, the ASIC will be reset in order to retrain the EIO. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-TLV_PARSE_ALIGN_ERROR
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'Parsed TLV message is not a multiple of 4 and the next ' 'TLV message can be misaligned'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-5-PUNT_POLICER_UPDATE_STATUS
### Response:
(Severity: 5), (Category: OS), (Description: The update status of LPTS punt policer with Error Info if update gets failed or Success.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_TRACE_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Traffic-eng could not initialize the tracing module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XLNC-4-NONROOT_PCAP_BLOCKED
### Response:
(Severity: 4), (Category: INFRA), (Description: A Linux user attempted to capture IOS XR traffic using xr_tcpdump or libpcap_xr, but neither user ID nor group ID was 0 (root) and so the request was rejected.), (Recommended Action: If the capture request is valid, try it again using sudo. If the capture request was not expected, check the user account for unexpected behavior. If the user account does have a root user or group ID, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng path-option' command in IOS XR?
### Response:
The 'mpls traffic-eng path-option' command is used to specify the path options for an MPLS TE tunnel. It allows you to define an explicit path, a dynamic path, or a combination of both. The path options are considered in the order they are configured. If a path option fails, the next path option is tried.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCD-5-INIT_FAILED
### Response:
(Severity: 5), (Category: OS), (Description: RedFs failed to setup the mentioned ltrace buffer.), (Recommended Action: Contact customer support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the function of the 'install diff' command in Cisco IOS XR?
### Response:
The 'install diff' command in Cisco IOS XR compares the currently active software packages with those in a specified repository or package file, highlighting differences.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
iosxrwbd-1-RESTART_NOT_SUPPORTED_SUPPL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message associated with RESTART_NOT_SUPPORTED See RESTART_NOT_SUPPORTED for explanation), (Recommended Action: See RESTART_NOT_SUPPORTED for explanation)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-NBR_DOUBLE_ADD_SCOPED_ILIST
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR_CLIENT-3-GEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error condition in client library api while communicating with the server process. It may be caused due to invalid api arguments by client process or a transient condition while the server process is initializing the ASIC), (Recommended Action: This message may indicate a transient condition while the card is booting up. Please check if the error message is seen continuously even after the card has reached IOS-XR RUN state. And if so, then try to power cycle the card. If the message is seen in every power cycle after the card is in IOS XR RUN state then please contact tech-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-ACP_ROUTING_INTERFACE_ENABLED
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'OSPF routing has been enabled on all physical interface'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_GLOBAL_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PROVISION_PRE_CHECK_CALV
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when provision prechecks are performed on the disk/system), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_PM_FAN_AIRFLOW_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when power modules present on the satellite have different fan types (suction or exhaust).), (Recommended Action: Please use power modules which have fans of same airflow type i.e. either sucntion or exhaust.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
c2c_pif-3-ERR_HW_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Hardware initialization failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-ERR_CBF_BLOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: LSD received a request for a CBF block that has conflicting labels present. Configured CBF Block cannot be allocated.), (Recommended Action: Reload the router and make sure you don't have overlapping label(s).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TFTP_FS-3-KEEPALIVE_THRESHOLD
### Response:
(Severity: 3), (Category: IP), (Description: this message indicates that the specified application did not write any data to the tftp destination for a long time. This can cause the remote server to abort the transfer thereby resulting in a partially transferred file.), (Recommended Action: if this problem persists, save the file to disk first and then transfer the saved file via tftp.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-LWLDI_REPLICATION_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: In case of SRv6 EVPN VPWS, NCS5500 J/J+ requires PI FIB to create an additional [replicated] LW-LDI on resolving (via-fib) leaf. This replicated LW-LDI is used by the hardware to program 'recycle' FEC to handle cases where L2 service traffic needs to be recycled. The LWLDI replication is not supported for recursive resolving leaf because the LDI will be shared LDI and shared LDI does not have LWLDI.), (Recommended Action: Change configuration/topology to have directly resolving (via-fib) leaf.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-REG_ERR
### Response:
(Severity: 3), (Category: L2), (Description: This is an internal software error. Please check the description for detail of error. PLA is failed to do registration. The process will automatically respawn up to a fixed number of times to try and recover. %s - description of the error. %s - failure reason), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_linux-7-NO_SPAWN_PARAM
### Response:
(Severity: 7), (Category: PLATFORM), (Description: pcmciad stores the pids of its children in /tmp. For some reason the file might have got corrupted), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-7-INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the VPLS module in the platform L2FIB VPLS component.), (Recommended Action: *NONE* Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to bind to sysdb. The error is displyed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_SWITCH-2-PORT_HARDWARE_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Software declared hardware fault on the specified port after the number of auto-recovery attempt exceeded the threshold. The port will be set to UDLD err-disable state until manually cleared. The fault could be hardware issues or connection problem.), (Recommended Action: Check the link on which the error happened. Try replacing/reconnecting the GBIC/SFP/cable at either end of the link. If the fault is at inter-RP link, try physical OIR. Clear error-disable and re-enable the port on the RP and see if the port comes up. If the port doesn't comeup collect 'admin show tech-support control-ethernet' log and contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different OSPF router types?
### Response:
The OSPF router types are\n- Internal router (all interfaces in one area)\n- Backbone router (at least one interface in area 0)\n- ABR (Area Border Router - interfaces in multiple areas)\n- ASBR (Autonomous System Boundary Router - redistributes external routes into OSPF)\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
sse_qosrm-3-MUTEX_INIT_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Failed to create the mutex.), (Recommended Action: Restart the process to recover from the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-INVALID_IND_SID
### Response:
(Severity: 4), (Category: ROUTING), (Description: When prefix SID value is configured as index value, it should be within the SR Global Block size configured on the router (default 16000-23999). The prefix SID will not be used until this config inconsistency is resolved.), (Recommended Action: Fix the configuration such that the SID index value lies within SRGB. Ignore if this is already done and warning will repeat until this is fixed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-SEU_INIT_ERR
### Response:
(Severity: 4), (Category: L2), (Description: The Essential bitmap for MAC FPGA cannot be obtained. The essential bitmap is used to determine if a SBE in CRAM is critical. This failure will not stop the PLIM process from running, it only changes the behavior of handling CRAM SBE. %s - Device name. %s - indicates the reason for the failure.), (Recommended Action: Upgrade FPGA with force mode. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PLATFORM_GET_RESERVED_PHYSMEM_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Find out physical memory information from SYSPAGE. If more memory is found than our defined minimum MIN_RESERVED_MEM, then a scaling factor is created to scale the number of packets, particles, etc, upward.Here reservation of physical memory got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-MPLSRTE_ASYNC_ERROR
### Response:
(Severity: 2), (Category: ROUTING), (Description: mpls route programming failed, send async resp. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_SERVER-7-EVM_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: event manager operations failed for some reason.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS_MODULE-2-DEV_PORT_MAC_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC allocation for the breakout port has failed. A look-up table is used to allocate breakout port MAC for Skyhammer and mini-Skyhammer LCs. A missing entry for production cards or proto cards can result in this error.), (Recommended Action: For a production card try restarting the VIC process on the LC. If not recovered try reloading the LC. In case the issue persists contact TAC. Proto cards can ignore this error, and verify the MAC doesnt conflict with interfaces on the other LCs in the same network.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT_INFRA-3-INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SIP-700 LC punt-inject and internal interfaces failed to initialize. SIP-700 will not function as expected. This message indicates the reason for the failure and the specific error reason.), (Recommended Action: The System Manager process (sysmgr) will not respawn this process. Get the output of the command 'sh controllers pse qfp infra punt <>' and 'show tech-support punt-inject'. Try to reload the SIP-700 line card first using the command 'hw-module location <> reload'. If it does not recover, powercycle the router. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAK-7-GETNODENAMEFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The Packet manager library was unable to retrieve the nodename for the node/linecard.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_LTH_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPU packet length FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-LOCAL_ACCESS_MAIN_PORT_FAILURE_CLEAR
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has recovered from the local access failure and has attempted to recover the ports in the redundancy group.), (Recommended Action: This message may not require any action. However the <CmdBold>show l2vpn iccp-sm group group-num<NoCmdBold> command may be used to verify the state of the ICCP-SM bundles. Reference the L2VPN ICCP-SM section of the IOS XR documentation for details on core isolation failures and related configuration commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-3-INTF_DB_DEL_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Interflex Manager failed to clean up interface from interflex db after an interface creation failed. This will have left the system in an inconsistent state. The most likely reason for this error is memory exhaustion.), (Recommended Action: Look for ways to free up memory and restart the interflex_mgr process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CATAPULT-5-ERR_CONT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates an error occurred beyond which execution of the catapult_driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-STBY_NOT_SUPPORTED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Clear command is not supported on standby), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-6-SHUTDOWN_DELAY
### Response:
(Severity: 6), (Category: INFRA), (Description: Informational message about shutdown delay in seconds), (Recommended Action: None No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is BGP Remotely Triggered Black Hole (RTBH) filtering and how is it implemented in IOS XR?
### Response:
RTBH filtering is a technique for mitigating the effects of Denial-of-Service (DoS) attacks by redirecting attack traffic to a null interface, effectively dropping it. In IOS XR, it is implemented by defining a policy that matches routes with a specific community (the RTBH community) and sets the next-hop to a pre-defined null interface. This policy is then attached to BGP neighbors that can send RTBH trigger routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_FPD-6-CPA_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that a failure has occured in CPA interface.), (Recommended Action: action mentioned in the message should be taken.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_IM_MEDIA_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) has been asked to process a packet arriving on an interface type it doesn't support, for example to deal with a MAC address on a point-to-point interface. This may result from transient errors in layer 2 switching. The packet has been dropped and no harm will result, but if the error persists then check for other unexpected behaviour.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering auto-tunnel primary feature?
### Response:
The MPLS traffic engineering auto-tunnel primary feature allows point-to-point MPLS TE primary tunnels to be created dynamically between tunnel head-end and tail-end routers. It reduces configuration compared to manually configuring TE tunnels. It is enabled with the mpls traffic-eng auto-tunnel primary command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-SRTE_DEPRECATE_NOTICE
### Response:
(Severity: 5), (Category: ROUTING), (Description: A configure for deprecated interface based traffic engineering with \ segment routing modle is committed using a CLI command or \ XML schema element.), (Recommended Action: Switch to the new policy based traffic engineering with segment \ routing model.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_DOM_SENSOR_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is raised when DOM sensor on a satllite port crosses either high or low threshold limits for that sensor type.), (Recommended Action: If the problem persists provide output of: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(RP)# show controllers <i/f> phy <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(RP)# show controllers <i/f> phy <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDLC-6-MSG_GENERIC_FUNC
### Response:
(Severity: 6), (Category: OS), (Description: BCDL consumer dll hit some error condition.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-PCI_BUS_CRITICAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCI bus error has occurred. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-SATELLITE_LMEP_DELETE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The local MEP for a Satellite Fabric Link could not be removed. The MEP, Service, Domain will still show in CFM manageability commands despite the Satellite Fabric Link's removal.), (Recommended Action: The extra MEP in CFM manageability commands can be ignored. If this is not possible the delete should be retried by bringing the Satellite Fabric Link up and then removing it again. If this persists, then try restarting the CFM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_FC_OOS_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-0 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the lsp-refresh-interval command in IS-IS?
### Response:
The lsp-refresh-interval command is used to configure the interval at which LSPs are refreshed. By default, LSPs are refreshed every 15 minutes. Increasing this interval reduces the amount of refresh traffic but increases the recovery time after a failure. The trade-off between bandwidth and convergence time should be considered.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-HOST_LINE_LOS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No Signal between the NPU and DSP), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOS_PORTU
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-THREAD_ATTRIBUTE_FAIL
### Response:
(Severity: 7), (Category: OS), (Description: Dumper sets various attributes to threads. Failure to set the thread attribute. It will have no impact on dumper.), (Recommended Action: Collect the following data and contact support. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. follow process <dumper pid>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-4-ERR_RESTART_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while trying to restart forwarding on the linecard), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_LCO-5-CROSSLINK_CONFIGURATION_REJECTED
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The satellite with the specified ID has rejected the crosslink configuration applied to the specified ICL.), (Recommended Action: Confirm the topology that is in use to ensure that all configured satellite ports are able to be used as a port and are not being used for another task (for example, a satellite fabric link). To trigger another attempt at configuring crosslinks on the satellite, modify the crosslink configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-0-ASIC_ERROR_RESET_THRESH_CROSS
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Mulitple reset occurred, threshold exceeds), (Recommended Action: Due to too many reset, board or slice may be reloaded to recover *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What types of LSAs are used by OSPF and what are their purposes?
### Response:
OSPF uses several types of LSAs: 1) Router LSA (Type 1) - Describes states of the router's interfaces within an area. 2) Network LSA (Type 2) - Generated by the DR, describes all routers attached to a multi-access network. 3) Summary LSA (Type 3) - Describes inter-area routes, generated by ABRs. 4) ASBR Summary LSA (Type 4) - Describes the route to an ASBR. 5) AS-External LSA (Type 5) - Describes routes redistributed from other routing protocols, originated by ASBRs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-2-ERR_MUTEX_LOCK
### Response:
(Severity: 2), (Category: FABRIC), (Description: The FIA driver cannot access the qlink register due to mutex lock failure, because of which it cannot configure the qlink ASIC on ASIC/channel errors or enabling the channels.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCID_SERVER-6-ROUTE_SCALE
### Response:
(Severity: 6), (Category: ROUTING), (Description: 1. Hw-module multicast route-scale config changed, reload the router to get route scale to scale mode.), (Recommended Action: Reload the router for new config to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-XFP_EEPROM_CORRUPTION
### Response:
(Severity: 3), (Category: L2), (Description: XFP EEPROM got corrupted; replace XFP), (Recommended Action: Replace XFP)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you configure SNMP to operate within a specific VRF context?
### Response:
To configure SNMP to operate within a specific VRF context, you need to use the 'snmp-server vrf' command followed by the VRF name. This allows SNMP operations to be performed within the specified VRF instance.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-DEVICE_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The PCIe server has encountered an additonal error on this device during error handling. The message contains the device identification and the error reason.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-6-l2if_oor
### Response:
(Severity: 6), (Category: L2), (Description: L2 EM Table OOR during l2if creation event), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-FTRUNCATE_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'file truncate failed.' 'process will exit with failure. '), (Recommended Action: 'Retry the issu operation.If error persists.' 'Contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-PARENT_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: Unable to create parent for node timer treee), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-SYSERR
### Response:
(Severity: 7), (Category: HA), (Description: This message signals an unrecoverable condition reported from the underlying system services. The severity of such errors cannot be determined locally by CDM, so it treats them all such conditions as non-fatal, transient errors. The CDM user must abort its immediate operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV4_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: AFEA IPV4-EA, error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-MPLS_PREFIXOBJ_NULL
### Response:
(Severity: 2), (Category: ROUTING), (Description: In label create/update,corresponding prefix object(sdk) is null.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-6-CBC_REFRESH_PWR_SEQ_COMPLETED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CBC detected there there is a CRC check failure in the power sequencers on this card and reprogrammed the sequencers in error.), (Recommended Action: Verify the status of the power sequencer programming using: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env trace pwrseq<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env trace pwrseq<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-5-REFCOUNT
### Response:
(Severity: 5), (Category: ROUTING), (Description: Internal reference count error in EIGRP. EIGRP may recover itself temporarily by doing the necessary error handling.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-CHKPT_INCONSISTENT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred while processing checkpointed information.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_13_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-ETH_SERVER_CONNECTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that shelfmgr is now connected to the eth_server process and is therefore capable of of receiving heartbeats (in the case of the Heart Beat thread) and boot requests (in the case of the boot thread).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_UIDB-2-INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the pidb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error during improper updation of variables or incorrect return state in platform FIB), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-RESOURCE_LOCKED
### Response:
(Severity: 7), (Category: INSTALL), (Description: This may be a resource issue, or the Install infrastructure may be behaving incorrectly. The current request or operation cannot be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-CONFIG_ABORT_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: Building of configuration has been abort due to an error), (Recommended Action: Collect the following details show loggig, show nvgen trace output,show running output,show config history,show tech parser, show tech-support sysdb.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-6-IPSEC_REJECTED
### Response:
(Severity: 6), (Category: SECURITY), (Description: Due to major configuration change or manual delete, this session is to be deleted. No new IPSec SAs can be established now on the session.), (Recommended Action: 'Wait until the session is completely removed and then try to establish a new one.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_CIDRID_SESS_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on a particular Circuit ID and Remote ID has reached the maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_BUNDLE_NO_ECHO_CLR
### Response:
(Severity: 6), (Category: L2), (Description: Resources are now available for this BFD over bundle session to run echo mode.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-SELF_RESET
### Response:
(Severity: 6), (Category: INSTALL), (Description: Status information after MBI download to local flash.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_INFRA_MGR-3-EVENT_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The message indicates an error in the interface information.), (Recommended Action: Please provide the following logs: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - Show logging - show services secontroller trace reverse location <ISM>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOGMIB-3-PARSEERROR
### Response:
(Severity: 3), (Category: SNMP), (Description: This is given out if there are problems parsing the encoded tuple from syslogd/sysdb.), (Recommended Action: Collect show tech-support sysdb on the location where this error is seen and also collect show syslog trace self slow/error from the active rp.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CALVADOS_DUMPER-6-REMV_SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: Dumper has deleted targeted file successfully), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_MQ_OFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 1 MQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-topology_inconsistencies
### Response:
(Severity: 3), (Category: OS), (Description: The topology database is in an inconsistent state after BGP-LS updates.), (Recommended Action: Enable 'pce debug error' for detailed information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN-6-CLOSE
### Response:
(Severity: 6), (Category: SECURITY), (Description: This is an info message from debug module of aaa component. This indicates that user has succesfully authenticated.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-NETWORK_CONFIG_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A network configuration error has been detected for the named virtual service.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_POLL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'poll on the given fd failed, which is a critical error.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-ATTACH_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Forwarder was not able to attach to plim interface .), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-1-ASIC_RELOAD
### Response:
(Severity: 1), (Category: FABRIC), (Description: ASIC Initialization has failed and it is necessary to trigger card reload), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-3-ERR_MAC
### Response:
(Severity: 3), (Category: IP), (Description: HSRP has failed to assign a MAC address to the interface.), (Recommended Action: Retry the configuration on the interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-frags_not_supported
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This message will typically occur when an ACE is specified with a fragments of an attached IPV6 ACL on egress direction.), (Recommended Action: Make sure that the fragments filter is used only at ingress direction for IPV6 ACL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-ERR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in CPUCtrl driver which requires exiting the function call.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-SCH_1_HANG_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Scheduler 1 Hang on bridge instance-1.), (Recommended Action: Please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPv4-2-BGP_PA_CONFIG_IFH
### Response:
(Severity: 2), (Category: IP), (Description: FIB is not committing BGP PA configurations due to internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_NI_INTR_CRC_ERR4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_CRC_ERR4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'pw-class' command in IOS XR L2VPN configuration?
### Response:
The 'pw-class' command is used to define a template for pseudowire configuration. It allows you to specify common pseudowire attributes such as encapsulation type, control word, and preferred path. The 'pw-class' can then be applied to multiple pseudowires, simplifying the configuration and ensuring consistency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What information is contained in an IS-IS NET (Network Entity Title)?
### Response:
An IS-IS NET contains the Area ID (identifies the area), System ID (uniquely identifies the router), and N-selector (identifies the network layer service, usually set to 00).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-OOR
### Response:
(Severity: 2), (Category: ROUTING), (Description: The FIB process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes are deleted and customer does a clear cef on the node.), (Recommended Action: Run the following command and check which resource(s) are running low on memory: <CmdBold>show cef resource location <node><NoCmdBold> Significant routes will have to be deleted followed by a <CmdBold>clear cef<NoCmdBold> on the affected node to resume normal FIB operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-INTF_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: SFP or XFP or CFP or QSFP entity is removed from the line card.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-5-NOTICE
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: A condition worthy of note has been detected.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-LOCAL_ADDR
### Response:
(Severity: 3), (Category: IP), (Description: The XR socket library failed to check whether data sent over a socket should be sent to a local Linux process. This may cause packets which should be handled by Linux applications to get dropped.), (Recommended Action: If the shared memory database being used has become corrupted, this may be resolved by restarting xlncd. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an AS path list?
### Response:
To configure an AS path list for BGP filtering, use the 'as-path-set' command in global configuration mode. RP/0/RP0/CPU0:router(config)#as-path-set AS_PATH_SET1
RP/0/RP0/CPU0:router(config-as-path-set)#ios-regex '^100_'
RP/0/RP0/CPU0:router(config-as-path-set)#exit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Failure in CE-TFTP server - memory allocation failure occured. The CE-TFTP server process will exit and respawn itself.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_MCAST-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM MCAST, error information), (Recommended Action: Please collect the console log, multicast traces (show mfib trace loc <>, show mfib hardware ltrace location <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-7-TRANSPORT_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: In the procedure disconnecting an existing connection, found out already DSC media is disconnected, hence printing the same information.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-APPLY_ERR
### Response:
(Severity: 3), (Category: SYSDB), (Description: This message indicates an error has occurred for a client during configuration. SysDB received an error code while building the list of errors to be sent to the server.), (Recommended Action: Try applying the configuration of this process/feature again. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_VLAN_SESSION_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular VLAN on the given access interface has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-6-INFO_IF_MISMATCH
### Response:
(Severity: 6), (Category: IP), (Description: An ARP packet was received from an unexpected interface. This can happen due to misconfiguration of the IP addresses on the participating devices or due to incorrect bridging configuration.), (Recommended Action: Please check the configuration of the participating devices.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-3-ERR_IPV6_ADDRESS_SCAN
### Response:
(Severity: 3), (Category: L2), (Description: A scan of the IPv6 addresses on this interface has failed. This means that IPv6 address information for this interface will not be included in outgoing CDP packets. The neighboring device will not see the IPv6 address information for this interface.), (Recommended Action: Restarting CDP as the address consumer, or the ipv6_ma as the address provider on this node may rectify the problem. proc restart cdp location <location of failure> or proc restart ipv6_ma location <location of failure>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-EVM_IMDR_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to initialize the event manager during IMDR due to the reason shown), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC7
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTT1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in memory allocation.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_EA-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: intf_ea encountered a fatal error and is not able to recover from the error. A text reason and error number will be supplied to describe the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-WAIT_FOR_STANDBY
### Response:
(Severity: 6), (Category: INSTALL), (Description: Install director has reloaded the standby or has switched over. Now it is waiting for the standby RP to be ready.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-DISK_ERROR_EVENT
### Response:
(Severity: 4), (Category: DRIVER), (Description: The host OS is reporting a disk error event while performing secondary volume health check.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-RUN_COMPLETE
### Response:
(Severity: 6), (Category: DIAG), (Description: Complete Diagnostic is running on the card), (Recommended Action: Nothing. This is an informational message and the system is working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_lite-3-ERR_PL_DLL_ASYNC_SEND_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to send pulse to PPP lite process fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: An error was returned when the IM Attribute EDM server called the debug_init_event() function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-DEBUG_EVENT_LOOP
### Response:
(Severity: 3), (Category: OS), (Description: QNET process had encountered a problem when waiting inside its event waiting loop. Process will exit and respawn.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCM-2-IM_ATTR_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Error in IM(Interface Manager) Attribute operation %s - Failure %s - Reason for the failure), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Restart the fr_vcm/atm_vcm process depending on whichever is appropriate. If it is a memory related error, LC reload only can resolve the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_CAPABILITIES-3-BOOT_FLASH_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: It is failed to set supported file system type on bootflash.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-IMDR_ERR
### Response:
(Severity: 3), (Category: L2), (Description: PLA driver encountered an error during iMDR procedure. The pla_server process encountered an error during iMDR procedure.), (Recommended Action: None, the process should recover. If it does not, the system will most likely be in an unrecoverable state and will take appropriate action. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_3_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power less than or equal to the low Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_13_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-INCONSISTENT_CONFIG
### Response:
(Severity: 3), (Category: L2), (Description: As part of trying to configure dot1q vlan with vlan id same as that of outer vlan of QinQ configuration or vice versa on another sub-interface, then error has to be reported to remove the inconsistent config.), (Recommended Action: Upon seeing this message, delete the subinterface that has just been created. Otherwise the system will be in inconsistent state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-4-CONFLICTING_CONTAINER_REMOVE
### Response:
(Severity: 4), (Category: INFRA), (Description: The IOS-XR appmgr has removed a container while activating an app in order to avoid a naming conflict.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver LWM event manager has failed to block on the indicated thread.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_DEBUG-2-L2FIB_SHM_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Some error occurred in operations related to Shared Memory area, such as debug intialization failed. This could have occurred due to overuse of memory. This can result in - 1) Not programming hardware for proper forwarding. 2) Not creating new bridge.), (Recommended Action: To minimize the scaling of bridges, some processes (unnecessary services) can be removed from the configs. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-VIEWFAIL
### Response:
(Severity: 4), (Category: SNMP), (Description: Could not create an SNMP view using the 'snmp-server view' CLI command. Possible causes could be poorly formatted viewnames or oid subtrees.), (Recommended Action: remove and re-apply the view config.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure MPLS L3VPN VRF route distinguisher auto-assignment?
### Response:
To configure MPLS L3VPN VRF route distinguisher auto-assignment, use the 'rd auto' command in VRF configuration mode. vrf MyVRF
rd auto
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-ETHSERVER_MSG_HANDLING_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The MBI hello process could not read or write a message via the ether server message delivery system.), (Recommended Action: 1. If the problem persists, please restart the MBI hello process to see if the error is cleared: 2. If the error is not cleared, please then restart the following procees to see if the error is cleared: 3. If the error still persists please collect the following information and contact your Cisco technical support representative: - The console output of the active RSP from user login till the end. - (admin)#show install trace mbi-hello location <affected location> - The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-4-SLAVE_UPD_FAIL
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: There is some mis-configuration or discrepancy likely between master and slave BNG due to which subscriber sessions are not getting established on the slave despite retries.), (Recommended Action: Please fix the error/inconsistency between the BNG routers and issue 'subscriber redundancy synchronize' command to get sessions back in sync.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-UNKNOWN_ASIC_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The asic type is unknown, this may be a program level error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL_CLIENT-3-GEN_ERR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_AHS_LOS_LANE0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-SYSDB_ITEM_DELETE_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-THREAD_CNT_CRITICAL
### Response:
(Severity: 3), (Category: HA), (Description: When number of threads has crossed above CRITICAL Threshold Percentage.), (Recommended Action: The number of processes running has increased. Determine if there are any unnecessary thread available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SI-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: SERVICES), (Description: A sysdb operation failed. Error message provides the information about this sysdb operation. If this error happens in verify/apply module config operation will not succeed. If this in EDM module then operational show/get may not work.), (Recommended Action: Try restarting the SI process showing this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-6-BIDIRECTIONAL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: UDLD detected bidirectional link. This is a non error condition and is an informational message), (Recommended Action: NONE If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-IDB_LOOKUP_DROP_PKT
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS was unable to find the NetIO IDB for the interface handle in the message. If this is seen during NetIO restart, it could be transient condition that should recover once NetIO is back up with all the IDBs in steady state. If this is seen in steady state, the ISIS adjacency on this interface could be affected. *RECUR*), (Recommended Action: If this message is seen during NetIO restarts and the message is seen only at that time, no further action is needed. If this message is seen during steady state more than once with the ISIS adjancency on this interface being affected, restarting netio process or improxy process might help in redownloading the IDBs to netio. Please contact the cisco-support in case this error re-occur. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPGAMGR-3-DEV_LIB_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred when loading the PD library for a specific platform's dll for device access, causing the process to return unexpectedly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-2-THREAD_CREATE
### Response:
(Severity: 2), (Category: SNMP), (Description: Sonet MIB API either having trouble in creating evm thread or thread is not yet created. Argument will indicate reason.), (Recommended Action: File a DDTS with required info collected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the ispf command in IS-IS?
### Response:
The ispf command enables Incremental Shortest Path First (iSPF) computation for IS-IS. iSPF allows the router to recompute only the affected part of the shortest path tree when a topology change occurs, instead of recomputing the entire tree. This can significantly reduce the CPU load and improve convergence time in large networks.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEVICE_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An USB operation is taking too long. If the device refers to an internal device, the board needs immediate attention.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-GEN_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-SRTE_ENCAP_PGM_WITHOUT_COUNTER
### Response:
(Severity: 6), (Category: ROUTING), (Description: Encap(s) for SRTE programmed without counters due to counter OOR), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-OPERATIONAL_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: An error was encountered while the Central Configuration Validator (CCV) was attempting to validate configuration. The requested configuration operataion will be allowed to proceed, but it is possible that CCV will fail to detect invalid configuration, or may incorrectly identify valid configuration as invalid.), (Recommended Action: The problem may be caused by system resource limitations. Attempt to address any resource limitations before proceeding. If further problems are seen, try restarting the process using the 'process restart ccv' command. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-3-SOCKET_INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: A software error occurred when the ANCP process tried to create and open a passive socket through the TCP process.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and if ANCP process is able to initialize and come up successfully after restart, then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_MSG_CHAN_GLOBAL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to convert a local connection channel to a global connection channel. This could be the result of a problem with the channel.), (Recommended Action: Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-3-ASIC_ERROR_SPECIAL_HANDLE_THRESH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ASIC errors have occured and been handled. Such error have crossed threshold.), (Recommended Action: ASIC errors that need special handling have occured and exceed the threshold. The error condition has been handled. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_DAP_POOL_EXHAUSTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-REDIST_THR_PFX
### Response:
(Severity: 4), (Category: ROUTING), (Description: We have reached the threshold level of number of redistributed prefixes.), (Recommended Action: Check if redistribution of large number of prefixes is desired and has not been wrongly configured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the two-stage commit model in IOS XR?
### Response:
The two-stage commit model in IOS XR separates configuration changes into two stages: (1) building the target configuration in a temporary area, and (2) applying the configuration changes to the running system using a commit operation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-HOST_SLAVE_QUEUE_NOT_EMPTY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NP detects HOST_SLAVE_QUEUE_NOT_EMPTY and reported through interrupts), (Recommended Action: No specific actions needed. The software should be able to recover from this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC Driver Initialization failed. Process Manager will restart the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is Management Plane Protection (MPP) and why is it used?
### Response:
Management Plane Protection (MPP) is a feature that helps secure management traffic by explicitly designating the interfaces that management protocols can use. It restricts the interfaces on which management protocols are allowed, preventing unauthorized access if an attacker gains control of a non-management interface.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-7-SYSDB_EDM_REG
### Response:
(Severity: 7), (Category: OS), (Description: Procfind was unable to register with the SysDB server for as an EDM, and therefore failed to initialize.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGMT-1-PORT_STATE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-BRIDGE_MTU_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: The interface MTU does not match the bridge payload MTU.), (Recommended Action: Configure the bridge to match the interface MTU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-UNEXPECTED
### Response:
(Severity: 7), (Category: HA), (Description: An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-6-OPERATION_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational condition and/or failure. The process can continue functioning as expected despite the failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWTECH-4-WARNING
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-NT_SWO_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: ESD has detected that its peer running on a adjacent SC slot is unresponsive. The peer ESD process on the adjacent slot is currently managing a switch card, which is also monitored by this ESD instance. As a result, this ESD instance triggered a PCIe NT switchover to take control of the Switch Card. The PCIe NT switchover attempt failed and the Switch card is not actively managed by an ESD instance on either of the SCs in the chassis.), (Recommended Action: Check if the ESD instance on the peer SC card has exited or crashed. Reload of the Switch Card may be required to recover from this condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-DQUEUE
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_SYSDB_CONNECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to bind to SysDB while opening a connection to it.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-CFGMGR_PARTITION_REG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Registration fail for config mgr partition-done notification), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HOSTNAME_SYNC-3-SYNC_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Error syncing hostname to linux), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TZ-3-LRD
### Response:
(Severity: 3), (Category: OS), (Description: Unable to query LR status), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-3-TIMER_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Fgid reallocation timer init has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR2_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-2 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-7-OP_DBG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a programmed diagnostic debug.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CFG_SLA_INST_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to create new SLA operations. This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some SLA operations will not have been created.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-ERR_UBOOT_UPGRADE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error occured while uprading the uboot image. Cause of the error will be mentioned in the message displayed. The upgrade of uboot image will fail and could lead the card to be in inconsistent state.), (Recommended Action: Look for the error message and take necessary action mentioned in the error message. For eg, the upgrade is being attempted without putting the card in uboot mode. The message would suggest the user to put the card in uboot mode and proceed. If problem persists, do a card reload)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-HEADLESS_RSP_TIMER_INIT_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: At process startup, the card could not set up its audit timer for detecting a loss of heartbeat communication with the RSP. The system will attempt automatic error recovery by restarting the mbi-hello process several times. If the error does not correct itself, this card will then be rebooted.), (Recommended Action: If the problem is not corrected via the automatic process restarts, please collect the following information and contact your Cisco technical support representative. 1. The console output of the active RSP from user login till the end. Please make sure the above error message(s) are included. 2. (admin)#show install trace mbi-hello location <affected location> Note: The above command may not work if the mbi-hello process keeps crashing. However, it can provide valuable information if it can be collected. 3. The output of the following CLI commands:)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-2-MSG_LOCAL_NODE_DEAD_RELOAD_MYSELF
### Response:
(Severity: 2), (Category: PLATFORM), (Description: When a CPU in DRP goes down, the other CPU should go down as well.), (Recommended Action: None; this CPU will reset along with other CPU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_XRV_SCH_LIB-3-EVM_REGISTER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Smart Call Home feature has failed to register with Embedded Event Manager for IOS XRv.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMIAP-2-INIT_FAILED
### Response:
(Severity: 2), (Category: IP), (Description: An error was detected during initialization of the IPv4 Single Management IP Address Process (SMIAP). This indicates an internal software error. The SMIAP process will be terminated.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVC_OPEN
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_DRV-3-ERR_FUNC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in platform component,the reason for the error is updated in the error message.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure static routing in Cisco IOS XR?
### Response:
To configure static routing, use the 'router static' command in global configuration mode. RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)#router static
RP/0/RSP0/CPU0:router(config-static)#address-family ipv4 unicast
RP/0/RSP0/CPU0:router(config-static-afi)#0.0.0.0/0 192.168.1.254
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-5-SVD
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route accounting in a table), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_FF_OVF_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA01 Tx burst FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VMANCLNT-7-VMAN_DEBUG
### Response:
(Severity: 7), (Category: LIB), (Description: Debug messages from virtualization manager client library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_14_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-4-IN_OVERAGE
### Response:
(Severity: 4), (Category: LICENSE), (Description: This is for information only. No action is necessary. The customer is still in compliance and within the overage amount as specified in their contract.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-PRIM_SERV_MSG_HNDLR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process cctl_primary_server location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-3-PWR_CTRL_FAILED
### Response:
(Severity: 3), (Category: LIB), (Description: Request to change card power state has failed due to the indicated failure condition.), (Recommended Action: Retry the operation sometime later.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-STAT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-ENCAP
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred processing a request to set Frame Relay encapsulation on an interface. LMI will not be able to control the interface.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-BIOS_ERROR_EVENT
### Response:
(Severity: 3), (Category: DRIVER), (Description: BIOS has reported a error event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE0_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE0_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_1P_OC192-6-PORT_DEL_INFO
### Response:
(Severity: 6), (Category: L2), (Description: Port deletion happened after the threshold time.), (Recommended Action: This is an informational message. Upon seeingt this message collect log via 'show tech-support pos' and send it to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-2-DEV_CTRL_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Controller transaction is taking excess time.), (Recommended Action: The USB controller requires immediate service. Please attempt to restart the hd_drv process using command: 'process restart umass-enum'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_CPP_HP_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EBS to CPP high priority FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8111-3-EXIT_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: The driver process will re-start and complete initialization of the switch device. However, if this message is seen for more than 5 times than please reload the card using -hw-module location <> reload and check if the message still occurs in subsequent reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-1-EVENTBLOCK
### Response:
(Severity: 1), (Category: ROUTING), (Description: AIB internally manages its activity using 'events'. An error occurred while processing events. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is configured in the local plane in IOS XR?
### Response:
The local plane in IOS XR is used to configure interfaces and features that are specific to a particular node, such as an individual line card or RP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_9_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-SYSMGR_REG_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to failure to register in MDR shutdown notification. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_IWF_SES_LIMIT_NOT_REACH
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_SCH_MEMP_ERR_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Scheduler Hang, Sram or egress mid-fifo parity error on NPU-0 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. ltrace init failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-3-MEM_ALLOC
### Response:
(Severity: 3), (Category: OS), (Description: The system failed to allocate memory. It's likely that the system is running low in memory.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-7-ERR_PSARB_ROLE_LOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: primary standby arbitration role lock failed as reply status is not ok. Please refer the reply status for more detail.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-3-SBIT_ECC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a SingleBit correctable ECC error.), (Recommended Action: Record information. If the problem persists, report the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_NVSAT_EA_DEBUG-6-REGISTER_FAILED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform NVSAT EA component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_EA-4-ERR_BATCH_ALLOC
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to allocate memory to handle the event described in the message.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. The ppp_ea process should be restarted to recover using the command 'process restart ppp_ea location <R/S/I>'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-IP_ADDR_RETRY
### Response:
(Severity: 5), (Category: ROUTING), (Description: APplying one or more IP address configs may have failed. We will retry them. This is a not a problem unless it keeps showing up continuously.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-5-NBR_ADDED
### Response:
(Severity: 5), (Category: SERVICES), (Description: 'A hello message is received and the device ' 'is added in the neighbor table'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-ERR_SYSDB_GET
### Response:
(Severity: 3), (Category: MGBL), (Description: 'sysdb item get operation failed. The error is displyed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SYSDB_DATALIST
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMBI-3-ERR_SET_REBOOT_CAUSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: There is a failure in setting reboot cause to syspage before performing a Kernel Dump.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE_CLIENT-3-ERR_CDI_BIND
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in i2c driver due to cdi bind function call failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PROVISION_PRE_CHECK_VG
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when provision prechecks are performed on the disk/system), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-IM_CONNECT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Connection to IM server failed during AFMon EA process init. This would lead to an inablility of AFMon EA to process CAPS from AFMon MA and to a potential disconnect between the hardware/software views of the configured afmon policies on the system.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE* Or try restarting manually. Get the job id from 'show processes afmon_ea location <>' 'process restart <JID> location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-SYSDB_REG_VERIFY_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process was unable to register for verification of tuples under the config space.This is not funtionality impacting, system will continue to funtion.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-4-INIT_ERR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error occurred during initialization from which eth server cannot recover. The process will restart on its own to attempt a recovery.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-3-IM_API_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Interface Manager client api call failed), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-DIAG_OK
### Response:
(Severity: 6), (Category: DIAG), (Description: The diagnostic tests did not detect any error on the card.), (Recommended Action: Nothing. This is an informational message stating that the line card passed the diagnostic tests.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-4-ERR_LTRACE_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: The FIA driver could not open/initialize the ltrace buffer. The FIA driver and the system should stll function as normal, with the exception that ltrace will not be available for fia_drvr process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_IR1_INTR_DC3_MAX_DROP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_IR1_INTR_DC3_MAX_DROP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-GOING_STANDBY_IN_BID
### Response:
(Severity: 6), (Category: PLATFORM), (Description: My node id is in BID state received BID message from the partner node and its higher than my node id so transit to standby. Got BID information from partner node in the BID state. So moving transititing from BID to standby state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-PHY_CLOCK_PERSIST
### Response:
(Severity: 2), (Category: L2), (Description: The PHY device experienced a distributed clocking failure and software could not recover the problem. The port has been disabled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-6-DUMPER_SNAP_DUMP_OK
### Response:
(Severity: 6), (Category: OS), (Description: A non-invasive voluntary coredump requested by the process completed successfully. Process might be experiancing a condition which needs investigation. This core file will help analysing the issue.), (Recommended Action: This should not occur in normal conditions, please provide the coredump to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-THREAD_ERROR
### Response:
(Severity: 3), (Category: MEDIA), (Description: One of the pthread_* functions returned with an error.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-NO_PLATFORM_DATA_FILE
### Response:
(Severity: 3), (Category: OS), (Description: The platform data file doesn't exist. This file specifies all the default fallback paths for the repective platform. If the file does not exist, then there will be no fallback options for that platform.), (Recommended Action: Verify if /etc/platform_process_dumper is present or not. Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_2_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_1_FIADDR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-1 from FIA DDR on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_6_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-SYSDB_CONNECT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The dsc process could not open connection with sysdb. Hence the show commands will fail. However, the system will continue to function normally.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4MC_STATIC-7-ERR_DEBUG_INIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: Internal error. Static Mcast debug library initilization failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STANDBY-3-ERR_MAX_MAC
### Response:
(Severity: 3), (Category: IP), (Description: More than the maximum supported number of MAC address filters has been installed for this interface meaning traffic to some virtual IP addresses will be dropped. Note that for sub-interfaces the limit is per parent interface.), (Recommended Action: Reduce the number of HSRP groups on this interface (or the parent if it is a sub-interface))
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_ADJ_MGR-3-RECEIVE_MESSAGE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The process encountered an error while trying to handle a message from a Service on a line card. If this happens frequently, then restarting the process that caused the error may fix the problem. It may indicate that the card is low on memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-OVS_ERR
### Response:
(Severity: 3), (Category: L2), (Description: OVS reported an error. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-6-REGISTRATION_FAIL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Red driver connection had not open for registration this will take care by connection management retries.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MULTILINK_UV-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT-1-GRP_ALM_ALERT
### Response:
(Severity: 1), (Category: SERVICES), (Description: The monitored flow has traffic issues as indicated by the react trigger. The problem is introduced either at some upstream router or even at the traffic source itself. Alternatively, a configuration mismatch between the traffic source and this router (for the flow data rates etc) can cause this error.), (Recommended Action: Check to see if traffic source is indeed sending traffic. Check that the traffic characteristics defined at the source match that on the monitoring router. Trace the traffic flow upstream to the source and verify flow-mon statistics at each applicable hop. Check for packet drops for the flow at intermediate hops - between source and the monitoring router)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-TREE_OPER
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when MRIB tried to perform a tree operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXMGR-2-UNCORR_ECC_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIE device uncorrectable ECC error), (Recommended Action: This error is a momentary error and software should be able to correct it. No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_ATND_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_NOTIF_HANDLE
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to handle a notification from the respective component.), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-ERROR_NO_MEM
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to allocate necessary memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_VENDOR_SDK_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The vendor SDK sofftware database initialization call by the FIA driver failed with the indicated error code.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls label range' command in Cisco IOS XR?
### Response:
The 'mpls label range' command is used to configure the range of local labels available for allocation by the MPLS protocols. It allows the operator to partition the label space and assign specific label ranges for different MPLS applications such as L3VPN, L2VPN, and MPLS TE. This command is useful for managing the label space and for avoiding label conflicts between different MPLS applications.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-HA_CHASSIS_ROLE_CHANGED
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Agent chassis role on HA has been changed to either active or standby.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_NETIO-7-ERR_GENERAL
### Response:
(Severity: 7), (Category: ROUTING), (Description: Some miscellaneous error occured. The text of the message explains the err/warning and traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_PREEMPTED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSMLIB-7-OPEN_FAIL
### Response:
(Severity: 7), (Category: L2), (Description: An error occurred in the PSE ASIC while opening rsm log file This will have an imapact on debuggability of the system.), (Recommended Action: Copy the error message exactly as it appears on the console)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_BGPLU_CHASSIS_CFG_CHANGED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with reloading the chassis.), (Recommended Action: System is inconsistent. Need to reload chassis for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPG-7-SCHEMA_BAG_NAME_MISMATCH
### Response:
(Severity: 7), (Category: MGBL), (Description: The schema specified that the returned bag would be a particular bag type, but actually was a different bag type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Pass the syslog and configuration information to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LOW_VOLTAGE_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK voltage less than or equal to the low voltage alarm threshold. The CPAK is the pluggable optics on the line cards. The voltage threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check the 'show environment voltages'. If the system voltage is normal then replace the optics with working one (if any). If the system voltage is not normal, then make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory' and 'show environment voltages'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does ZTP work in Cisco IOS XR?
### Response:
When a Cisco IOS XR device with ZTP enabled boots up and does not find a valid configuration, it sends out a DHCP discovery message to obtain an IP address and the location of a configuration script. Once it receives the script location, it downloads and executes the script, which can include commands to download and apply a full configuration, upgrade the software, or perform other provisioning tasks.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SSP_INTR_SP1_RX_EOP_ERR_P_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SSP_INTR_SP1_RX_EOP_ERR_P interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-SPUR_INTR
### Response:
(Severity: 3), (Category: FABRIC), (Description: An interrupt is generated but the interrupt status register indicates no pending interrupts. This may be due to a hardware error where the interrupt line is stuck in its active state i.e. active low.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-PL_FRR_LOOKUP_CREATE_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: We don't expect this FRR state setup to fail. It can only happen under low memory or some unexpected conditions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESSION_MON-3-EDM_INIT_ERR
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to initialize EDM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_SPAN_EA-3-ACL_CONFIG_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message will typically occur when permissible single region size is exceeded or total number of entries allowed in TCAM for a given application is exceeded.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-SIGHEAP
### Response:
(Severity: 4), (Category: OS), (Description: The Event Manager signal thread could not allocate memory needed to deliver a signal message to the Event Manager message channel.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Either some process is using too much memory or there is not enough physical memory available in the router. Determine if an application is misbehaving by checking the amount of memory allocated to each application and noting whether one is unusually large. If there are no misbehaving applications, memory should be added to the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-3-SECURE_MODE_ENABLE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: Failed to enable ZTP on secure mode.), (Recommended Action: Check if Secure ZTP is supported on this platform)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-BATCH_PROTO_REG_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error has occured processing protocol register batch from a RIB client.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_SUB_PARENT
### Response:
(Severity: 4), (Category: L2), (Description: IM could not provide information on the control parent for a given subinterface. This means that adjacencies for this subinterface cannot be programmed in hardware.), (Recommended Action: Delete and recreate the subinterface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-NON_RELOAD_MDR_ISSU
### Response:
(Severity: 7), (Category: INSTALL), (Description: The restart information in the PIE file is invalid. PIEs that use the 'ISSU' install method must use a restart type of 'reload' or 'MDR'.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INVALID_PACKAGE
### Response:
(Severity: 3), (Category: OS), (Description: The package definition file for the named virtual service has failed to be validated and the virtual service will not run.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-1-I2C_ERROR_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_XAUI_RDY_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI not ready on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-STARTUP_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: acctd process failed to startup properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-SYSMGR_GET_PROC_ROLE
### Response:
(Severity: 7), (Category: HA), (Description: A call to sysmgr_get_proc_role failed with the given status.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-CACHE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured updating the SA cache. This indicates a problem adding an element into the MSDP database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp sa-cache all<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp sa-cache all<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-6-PLANE_RACK_MCAST_DOWN
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message gives additional information related to a plane in multicast-down state. The message contains a comma-separated list of the line card racks that reported the multicast-down state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-EXITED
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP has cleaned up and exited.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-UNKNOWN_DIRECTION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Receiving or transmitting direction is unknown, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOS_PORTR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-5-DF_ALGO_MISMATCH
### Response:
(Severity: 5), (Category: L2), (Description: EVPN: Designated Forwarder election algorithm has been defaulted to Auto. If any router has a DF election algorithm of Auto, all neighbours must default to Auto. Cannot have mismatched algorithms.), (Recommended Action: Verify all peers for the ESI are running the same service-carving mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMON_ACL-7-INIT
### Response:
(Severity: 7), (Category: ACL), (Description: The ACL compression library initialization has failed. The ACL compression functionality will be unavailable), (Recommended Action: Check the error string and collect required information)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-IM_LOOKUP_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_0_FIA_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error - 0 from FIA on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-5-CLOCK_INTERFACE_0_TX_DISABLE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: On the standby RSP, BITS outputs are disabled. This prevents the sync 0 transmitters on RSP0 and RSP1 from interfering with one another when a Y-cable is installed.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_UNLOCK
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-SUBINT_ACL_EGRESS
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Access-lists are not supported in the egress direction on sub-interfaces.), (Recommended Action: Remove the egress access-list from the sub-interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-3-DLL_TRACE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of tracing for the adjacency management DLL. This will result in not registering the debug DLLs. The adjacency programming will continue.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are some of the key factors that have enabled the rapid growth of network capacity and performance?
### Response:
Transmission capacity of a single fiber pair has increased from 155 Mbps in the early 1990s to multi-terabits today using dense wavelength division multiplexing (DWDM). CPU speed has increased from tens of MHz single-core to multi-GHz multi-core processors, while memory capacity has grown from megabytes to many gigabytes, following Moore's Law of doubling every two years.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_SBE_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA01 channel FIFO single bit error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROMMON_BURNER-2-ROM_BURN_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An error occurred during the rom programming that caused the operation to fail.), (Recommended Action: Attempt to program the image again. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-API_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus API debugging information. The error message and the return code indicate the type of error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-2-DEV_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Timing driver software version is not compatible with the hardware FPGA version.), (Recommended Action: Upgrade the ClkCtrl Timing FPGA image using the FPD procedure. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAOTMP-2-CDI_SEND
### Response:
(Severity: 2), (Category: PLATFORM), (Description: daotmp encountered an error, while sending message to client. It can be due to misbehaving timing chip on ASR9K.), (Recommended Action: Please attempt to correct the error by restarting the process. Issue the command in exec mode -process restart syncctrl If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-5-DEBUG
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This is an information message in the ASR9K platform specific code software. The message is for debug purposes only and not an error.), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LMRIB_API-3-GEN_ERR_2
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred in lmrib client lib.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-7-DEBUG
### Response:
(Severity: 7), (Category: L2), (Description: SPA OC48 debug message), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-TREE_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: Unable to create node related timer tree.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-6-VALUE_MISMATCH
### Response:
(Severity: 6), (Category: OS), (Description: There is a mismatch between the ltrace values read at startup vs the ltrace configuration stored in Sysdb. This could be either because the node was inserted into a chassis with pre-existing ltrace values for it, or the ltrace_config file in the filesystem was somehow corrupted.), (Recommended Action: This could be expected if a new node is inserted into a chassis. The new ltrace configuration read from Sysdb will be written to this node, and will take effect once this node is reloaded. Else Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-BOOTVAR_FILE_OPEN
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to open bootvar file.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-MEMORY_FAILURE_MINOR
### Response:
(Severity: 7), (Category: INSTALL), (Description: 'A non-critical memory allocation failed. The operation can and will ' 'proceed. There may be cosmetic errors such as incoherent error messages.'), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-SNPRINTF_FAIL
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-COUNTDOWN_REACHED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: countdown for primary DRP to know about death of standby DRP or countdown to detect my partner's buddy went down or countdown to become primary from standby reached 0.Please check the message for more details.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-STALE_HANDLE_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: A pfi query was made for a stale interface handle, possibly transient error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_SYSDB
### Response:
(Severity: 3), (Category: OS), (Description: sysdb return error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG_HIST_UPDATE-3-SYSDB_DELETE
### Response:
(Severity: 3), (Category: MGBL), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TUPLE_UNPACK
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to tuple_unpack() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp bestpath compare-routerid' command in IOS XR BGP configuration?
### Response:
The 'bgp bestpath compare-routerid' command is used to compare the router ID as a tiebreaker for best path selection. By default, if there are two paths with identical attributes, BGP will choose the path from the peer with the lowest router ID. This command changes the behavior to choose the path from the peer with the highest router ID.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MLACP_BUNDLE_PEERING
### Response:
(Severity: 6), (Category: L2), (Description: The mLACP peer device for the bundle has changed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSC-7-ERR_DEBUG_CLEANUP
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric statistics client library encountered debug facility clean up failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-OPTICS_PIE_DEACTIVATED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Advanced optic pie is deactivated for OTN(G709).), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh processes vic location <> - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ERR_VENDOR_SDK_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The vendor SDK sofftware database initialization call by the NPU driver failed with the indicated error code.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV_AGENT-6-CPAK_OIROUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CPAK enity is removed from the line card inv_agent removes the port data whenever it is presented.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-DELETE_IDB
### Response:
(Severity: 3), (Category: L2), (Description: The mentioned idb in the argument, itself is NULL.), (Recommended Action: It's an error check only. If found consistently, collect required_info and contact SUPPORT.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_0_XAUI_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from XAUI on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CRYPTOMAP-2-PARSE_MEMORY_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: No memory left to parse show output data), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the log-adjacency-changes command in IS-IS?
### Response:
The log-adjacency-changes command is used to enable logging of IS-IS adjacency state changes. When enabled, the router logs messages when an adjacency comes up or goes down. This is useful for monitoring the stability of IS-IS adjacencies and for troubleshooting adjacency problems.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-NOBACKBONE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The router was flagged as an Area Border Router (ABR) without backbone area in the router.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show ospf <process-name> trace all - show running-config router ospf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-4-BASE_MAC
### Response:
(Severity: 4), (Category: L2), (Description: LRd returned a NULL MAC address to be used as the base MAC address for the system and bundle MAC addresses.), (Recommended Action: Check the VT topology definition file to ensure a Host MAC Address is specified. Check the LRd stub library and VT IO code to see if there is a bug in accessing the defined value.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_MAX_PATH
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred while trying to read out the checkpointed rpf data. PIM rpf info may be incorrect), (Recommended Action: Check show pim rpf output for correctness Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-DDR_LOSS_OF_SYNC_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on DDR interface on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the commit confirmed option in IOS XR used for?
### Response:
The commit confirmed option in IOS XR allows committing configuration changes temporarily. If a commit confirm is not issued within a specified time period, the system automatically rolls back to the previous configuration. This is useful for verifying configuration changes before making them permanent.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_EES_REG
### Response:
(Severity: 3), (Category: FABRIC), (Description: EES domain enabling failed. This will prevent ucd/mcd messages to be exchanged between the applications and driver.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-STATE
### Response:
(Severity: 2), (Category: ROUTING), (Description: FIB initialization has failed due to the reason indicated in the message. The process will attempt to recovery by restarting. If the restart count is excessive then the node may reload. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-INTERNAL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An unexpected internal error has occurred in the SESVI EA process. The process will restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-SHM_STATS_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath was not able to allocate sufficient shared memory for statistics collection. This error could occur for two reasons. 1. The system is low on resources. 2. Error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-3-DUPLICATE_DOCKENTRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: This message appears because the ORAA was defined twice.), (Recommended Action: This is a coding error. Please report it to engineering team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_DEBUG-3-INIT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Debug library initialization failed), (Recommended Action: Please contact Cisco TAC for support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_INFRA-3-connect_failed
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to connect to config manager), (Recommended Action: Please contact tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALID_IPV6_FLAG
### Response:
(Severity: 3), (Category: MGBL), (Description: ' ipv6 nvgen flags are incorrect. Probably error in ' 'dumping the flags.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-MUTEXOPFAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The packet subsystem failed to get mutex.), (Recommended Action: Collect console log and the following information and contact TAC support with this info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show netio trace all location <loc> -From k-shell, get the output of following command(s) eint_netio_debug)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an severe error message in the DPA module to indicate an error.), (Recommended Action: Please collect the console log, DPA traces (show dpa trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-THREAD_INIT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while creating the CHKPT Thread This will cause the Platform dependent code to stop executing.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-3-STRING_LENGTH
### Response:
(Severity: 3), (Category: OS), (Description: Given string is longer than expected. There is mismatch in source code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The FEA DLL failed to initialize. The System Manager will restart the EA process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-ERR_SERVER_GROUP
### Response:
(Severity: 3), (Category: SECURITY), (Description: None at this time), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICYMGR-3-GO_ACTIVE
### Response:
(Severity: 3), (Category: APP_INFRA), (Description: An error was encountered in policymgr during policymgr activation after failover. Policymgr configurations may not work properly. Subsequent updates/modifications to policy-map/class-map configurations may not function properly, including activating service-policies on interfaces.), (Recommended Action: Collect required_info and contact TAC, and the collected information is only used for internal diagnosis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_STATE_DOWN
### Response:
(Severity: 6), (Category: L2), (Description: The BFD session has gone down. This may be as a result of the forwarding path being down.), (Recommended Action: Determine if the forwarding path to the neighbor has gone down.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_OPERATION_SYSTEM_ERROR_SPECIFIC_NODES
### Response:
(Severity: 3), (Category: INSTALL), (Description: Further information supplied to be used in conjunction with the INSTALL_OPERATION_SYSTEM_ERROR_SPECIFIC_NODES_HDR message.), (Recommended Action: Check system consistency using 'install verify'. Reattempt the install operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TS_LS_CRC_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a crc error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-1-OVS_ALERT
### Response:
(Severity: 1), (Category: L2), (Description: OVS reported an alert. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-7-SYSDB_EDM_REG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Procmgr failed to register with Sysdb EDM. This may be a program level error.), (Recommended Action: Provide the required information to support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-VLAN_TAG_GEN_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: PTP was unable to generate a VLAN tag stack for an interface. This is most likely to be due to configuring PTP on an interface with a complex VLAN encapsulation, which is not supported.), (Recommended Action: Check whether the interface has a complex VLAN encapsulation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-4-ERR_EVC
### Response:
(Severity: 4), (Category: L2), (Description: After detecting an error with the connection to the specified service, MFR MA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-WARM_RLD_JUMP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Card comes up without MBI_HELLO or MBI_HELLO_WARM, need to check warm-reload is really done successfully.), (Recommended Action: Initiate 'show warm-reload detail location <loc>' and check Successful Attempts variables. If one of them is not zero, warm-reload is succeeded. Else, capture the shelfmgr log and use the 'show shelfmgr trace' CLI in admin-mode to fetch debug information. Also capture sysmgr.log and sysmgr_nv.log from LC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-3-VRRP_SCALE_RELOAD_REQ
### Response:
(Severity: 3), (Category: FABRIC), (Description: If the hw-module command is used to configure VRRP SCALE and router is not reloaded, there will not be any effect.), (Recommended Action: In order to make effect for vrrpscale, the router must be manually reloaded.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-7-MEMORY
### Response:
(Severity: 7), (Category: OS), (Description: Insufficient resources were available to allocate memory for the specified item. Procfind may not be able to continue running.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCSQ_MGR-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: CCSQ encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-I2C_BUS_RESTORED
### Response:
(Severity: 4), (Category: DRIVER), (Description: CCC driver has restored the I2C bus to operational state after performing I2C bus unhang on the specified Master I2C Bus.), (Recommended Action: N/A.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_DATALIST_FREE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-3-RX_ALARM_LOS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For T1 mode LOS is declared (as detected by BITS receiver) when no pulses are detected in a window of 192 consecutive pulse intervals. In E1 and 2048kHz modes LOS is declared when no pulses are detected in a window of 255 consecutive pulse intervals. For UTI mode, LOS is detected by hardware as per J.211 specifications.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Check the cable integrity and cable connectors. The receive pair should be on pins 1,2 on the RJ-45 jack.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-WRONG_LR_ID
### Response:
(Severity: 3), (Category: HA), (Description: The value of lr ID is either <-1 or >7, which is wrong.), (Recommended Action: Make sure the value of lr ID is in the correct range.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-6-NODE_PWRDWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Message indicating that the node has received a power down request and the node is going to power down.), (Recommended Action: No action is required. The message is logged for informational use.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-REPLICATE_FAIL
### Response:
(Severity: 7), (Category: MEDIA), (Description: Syncfs failed to replicate file/dir, it will retry it again.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMED_EVM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: HA), (Description: The event infrastructure will ignore this error and continue to wait for the next event. If this error is seen repeatedly, the process may not be able to function and will need to be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EEM-4-ACTION_SYSLOG_LOG_WARNING
### Response:
(Severity: 4), (Category: HA), (Description: The action_syslog call from tcl script.), (Recommended Action: Please verify command(s) mentioned in tcl script prior to error message are working fine (on router prompt). If issue is still seen then please provide command details which has resulted into this error condition to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRD_LIB-4-NOTIFICATION_FAILED
### Response:
(Severity: 4), (Category: SERVICES), (Description: The Service Role Daemon client library received a notification, but was unable to perform the necessary operations to execute the client's callback function. The client process is unaware of a role change event that has occured, and as such services running on the affected node are likely to be out of sync.), (Recommended Action: In order to force a resync of the current role status, restart the process that emitted this error. If the error string indicates a low resource condition, first free up some resources. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-PLATFORM_SLOT
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to get the slot number of local node through platform library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-EVM_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed in event management functions. In this scenatio OBFL will restart and recover by itself.), (Recommended Action: If the issue is seen after restart, Please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-DELIVER_POISON_PILL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Active reddrv issued a poison pill packet to reset peer RP or SC), (Recommended Action: No action needed. This is to ensure peer RP/SC to drop out from active role)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-5-EVC_ENCAP_CONFLICT
### Response:
(Severity: 5), (Category: L2), (Description: The Ethernet LMI protocol is unable to report EVCs for subinterfaces which have conflicting encapsulations. In this context, two subinterfaces have conflicting encapsulations if they belong to the same parent interface and any of the following conditions are true: they have at least one VLAN ID in common in the outermost tag; one matches untagged packets while the other matches priority-tagged packets; one is configured to match any VLAN ID in the outermost tag while the other is configured as the default match.), (Recommended Action: Re-configure the subinterface to use a different encapsulation. There may be more subinterfaces with conflicting encapsulation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-SIA
### Response:
(Severity: 3), (Category: ROUTING), (Description: Neighborship was reset to the specified peer, due to a prefix being in stuck-in-active state.), (Recommended Action: Verify that there are no packet drops between the neighbors and the state of the EIGRP prefix in the neighbor. Clear the eigrp neighbor. If the CPU utilization by EIGRP remains high, restart the EIGRP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-BAD_REPLY
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-2-RX_RF
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The PLIM received a Remote Fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Correct the far end interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-CHANCREATEFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server failed to create an event manager and channel. Clients will be unable to connect to packet server, and packet server will be unable to send and receive messages.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-ISSU_NODE_BOOT_NOT_ALLOWED_PRE_RUN
### Response:
(Severity: 4), (Category: INSTALL), (Description: Node rebooted while ISSU install operation is in progress, it will not be allowed to come up until the RUN phase completes.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAR_ALIGN_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 char alignment error on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPP_EXMEM-6-THRESHOLD_CLEAR
### Response:
(Severity: 6), (Category: L2), (Description: Exmem resource cross under its threshold), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel path-selection metric feature?
### Response:
The MPLS TE tunnel path-selection metric feature allows the configuration of the metric type to be used for CSPF path calculation for a given tunnel. The default is to use the TE metric which is carried in TE LSAs. Alternatively, the IGP metric can be used which is the normal OSPF or IS-IS metric. This allows path optimization per individual tunnel.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-PCI_BR_PORT_RESET
### Response:
(Severity: 6), (Category: INFRA), (Description: Upon a card reload, when the the PCIe links between the upstream PCIe bridge device connected to the Ethernet Switch does not come up, the Ethernet Switch Driver attempts to perform a port reset during board power-on, on the upstream PCIe Bridge to which the Ethernet is connected.), (Recommended Action: No action is required from the operator. This is informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_BUNDLE_MODE_CHANGE-3-FAILED
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS policy on the bundle interface or bundle sub-interface specified could not be changed successfully to different bundle mode. This may happen because the QoS policy is now invalid with new bundle mode.), (Recommended Action: Verify the the policy parameters are still valid in new bundle modes. Remove the qos policy and reattach. Fix errors in the policy, if any.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COMMON_ACL-3-EPERM
### Response:
(Severity: 3), (Category: ACL), (Description: A process that is not authorized to use the ACL compression library is trying to load and use it.), (Recommended Action: The use of Access Control List compression library is restricted to Packet Filtering Execution Agent (pfilter_ea) only. This error message does not impact the functioning of the system. To find out why the issue has occurred, please note down the name of the offending process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_CAPABILITIES_CONFLICT
### Response:
(Severity: 6), (Category: L2), (Description: Discovery mode cannot complete due to a conflict in the required configuration of the remote peer.), (Recommended Action: Ensure that the configuration requirements on this interface match the configuration of the remote OAM peer.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-0-SPINE_SHUTDOWN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Fabric encountered fatal fault and is isolating fabric plane to recover from the fault. If this fault occurs on active RSP, it would trigger chassis reload/switchover.), (Recommended Action: Fabric encountered a fatal fault and card has been reset to recover from the fault. If the fault is persistent after card reload, contact support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-BUNDLE_LOADBALANCE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error indicates that member replication based on member weight in mixed speed bundle has gone above the supported number and it will impact traffic loadbalancing.), (Recommended Action: Please verify the bundle config and bundle scale config. And adjust if it exceeds. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'timers throttle spf' command in OSPF?
### Response:
The 'timers throttle spf' command is used to control the rate at which OSPF performs SPF calculations. It is configured with three values: the initial delay, the minimum hold time, and the maximum wait time. The initial delay is the time between receiving a topology change and starting the SPF calculation. The minimum hold time is the minimum time between two consecutive SPF calculations. The maximum wait time is the maximum time between two consecutive SPF calculations. This command is useful for preventing excessive SPF calculations during periods of network instability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the configuration session lock feature in IOS XR?
### Response:
The configuration session lock feature in IOS XR allows an administrator to lock the configuration mode so that no other user can make configuration changes. This prevents multiple users from making conflicting changes simultaneously.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlan_netio-3-TRACE_INIT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The VLAN NetIO component encoutered an error during trace buffer initialization. This is likely to cause VLAN interface setup to fail.), (Recommended Action: If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-EVENT_TP_CREATE
### Response:
(Severity: 3), (Category: OS), (Description: An error occured whilst PlaceD was creating a threadpool.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-SYS_ERR
### Response:
(Severity: 4), (Category: INSTALL), (Description: A non fatal run time error has occured caused by insufficient system resources), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_SYSMGR_MON_LIB-3-SYSMGR_MONITOR_THREAD_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: vm-monitor sysngr monitor thread is not alive.), (Recommended Action: This indicates an vm-monitor process is hung or unable to communicate with sysmgr.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LCP_MGR-4-INFO
### Response:
(Severity: 4), (Category: INFRA), (Description: LCP Manager info message.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HBAGENT-4-SET_HEARTBEAT_PRIORITY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Unable to set the heartbeat pulse of this node to high priority. Proceeding with default priority, however in a high CPU consumption, this node's heartbeat pulse may get lost, causing this node to get reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-7-UPDATE_INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIO-4-ERR_LWM_SEND
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The EIO Library encountered LWM error, therefore failed to send pulse. The System Manager process (sysmgr) will automatically respawn the annunciated process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-BOARD_INCOMP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This indicates that a board boot attempt was made with board types that are either not supported in the slots or combinations that they are presently in. Therefore, the board(s) were powered down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTO_IP_RING-5-EQUAL_AUTOIP_PRIORITY
### Response:
(Severity: 5), (Category: L2), (Description: The Auto-IP Ring feature requires two peer devices to exchange different Auto-IP priorities, in order to facilitate the IP auto-negotiation process. If they advertise the same Auto-IP priority, then IP auto-negotiation will not happen. This may indicate that the ring ports of the two devices are wrongly wired.), (Recommended Action: Use the 'show auto-ip-ring' or 'show run' command on both devices to view the IP address of the ring ports and the advertised/received Auto-IP priorities. If the Auto-IP priority is both 2 or both 0, then try change the wire connection (that is, switch the two ring ports on one ring device) if necessary. If the Auto-IP priority is both 1, then Auto-IP negotiation can be started by configuring an IP address manually on any of the peer devices.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_3_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_LMI-3-SET_DLCI_STATUS
### Response:
(Severity: 3), (Category: L2), (Description: The VC Manager returned an error after receving a request to update VC states.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-2-MAX_RECOVER_BACKUP_BIOS_BOOT
### Response:
(Severity: 2), (Category: DRIVER), (Description: The device is detected to be booted from backup BIOS. Backup BIOS is only to debug the problem with the main BIOS but system can't run with it properly. Hence, tried recovery but exceeded the maximum recovery attempts.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Log will be collected in /misc/disk1/log directory in admin prompt 1. Copy the log collected in /misc/disk1/log directory in admin prompt 2. show tech card-mgr 3. show tech ctrace)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-INVALID_SLOT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVDPMEM-3-SSCANF_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-EVM_EVENT_BLOCK
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when block waiting for Event Manager events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-NSR_NOTIFY_READY
### Response:
(Severity: 5), (Category: ROUTING), (Description: ISIS notify the system if it's nsr ready. if the notification failed, the return rc will be non-zero.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-5-TCAM_OVERFLOW
### Response:
(Severity: 5), (Category: OS), (Description: TCAM space is not enough for all Pre-IFIB entries in the particular TCAM region. All control packets which do not have matching Pre-IFIB entries in TCAM will use SW path to forward to destinations.), (Recommended Action: Disable the numbers of services configured for the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-FABRICQ_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to create one of the fabricq queues.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AVSM_APIV-4-MOD_NOT_REGISTERED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This event will cause the module to fail in APIV versioning negotiation operation.), (Recommended Action: Contact Cisco TAC to diagnose the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_7_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-MISSING_STATS
### Response:
(Severity: 3), (Category: MGBL), (Description: An RP switchover occurred before the standby stats manager (now active) was able to complete an initial sync with the previously active stats manager. As such, some or all statistics data maintained by this stats manager may have been lost. Depending on how much data was transferred prior to the RP switchover, some or all statistics may be impacted. The 'last discontinuity' timestamp for each item of interface statistics will indicate whether the statistics for that interface have been preserved or not.), (Recommended Action: None. There is no way to recover any statistics that have been lost. However, note that the operation of the statistics infrastructure is not impacted and subsequent statistics collection will function as normal.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTR4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD-7-SPECIFY_PLIM_INTERFACE_RETRY_QUEUED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The forwarder NetIO DLL returned errors when sent a bulk of specify plim interface information, most likely because the interface is not yet in NetIO. A retry has been enqueued.), (Recommended Action: If this condition persists, it is likely NetIO is out of sync. Restarting NetIO should clear the issue. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-UNEXPECTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Network Processor experienced an unexpected error condition. Loss of configuration could have occurred.), (Recommended Action: Call your next level support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-CPM_ACTIVATE_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to failure to activate the CPM interface for satellite events. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-HW_PROG_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an informational message in FIB platform to indicate that engine layer identified an warning while programming an object in h/w.), (Recommended Action: Please collect the console log, show tech-support cef platform. This is not a HW programming error but a warning condition that needs to be monitored for the given table and transition and report any abnormal behavior to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-0-ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: System Controller asic detected a critical error that will bring the node down. A reason text will be supplied.), (Recommended Action: The board will reset and reboot after encountering this error. Check if the board comes up fine after the reboot. If the board does not reboot, try to reload the board manually using CLI. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-HA_NO_IDT_RCVD
### Response:
(Severity: 4), (Category: L2), (Description: CFM has received an HA role change notification from ISSU Lite, indicating that the ISSU switchover has happened. However, it has not been informed that persistent Domain and Service data has been successfully mirrored to the new post-ISSU version. The CFM Global Manager process waits until this persistent data has been mirrored before completing initialisation, so unexpected behaviour may result. In particular, new Domain and Service configuration may not be accepted.), (Recommended Action: CFM may not accept new Domain and Service configuration. A process restart may help resolve the situation: issue 'process restart cgm location all' and confirm at the prompt. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-PUNT_RX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PUNT FPGA reported to Interrupt controller that the data it received had parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMLOG-3-FREE
### Response:
(Severity: 3), (Category: OS), (Description: An attempt was made to free a null pointer), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_LOGGER-6-LOGGING_DEVICE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message to indicate the location of for es_persist, bcm.log, stp.log and stp_shim.log are.), (Recommended Action: Do nothing)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-STATIC_XCONNECT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The static cross-connect on the specified tunnel interface has changed.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status' \ ' cross-connect' interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-KEYCFG
### Response:
(Severity: 4), (Category: ROUTING), (Description: An error occurred when trying to configure an ospf authentication key.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-PRODUCER_REQ
### Response:
(Severity: 3), (Category: OS), (Description: A call to a BCDL interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-INDEX_VERSION_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB uses the platform specific adjacency DLL when creating adjacencies. The DLL found has an unusable version number, and AIB cannot continue to process any adjacency information. The process will attempt to recovery by restarting. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Run the following command to check for the presence of the DLL: <CmdBold>show dll location <node> | include libaib<NoCmdBold> Confirm that the libaib and libaib_index DLLs have the same version. If they are, try to restart the AIB process using the following command: <CmdBold>process restart aib location <node><NoCmdBold> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_MEMMON-1-TOP_ALERT
### Response:
(Severity: 1), (Category: INFRA), (Description: Top Memory users is above critical threshold, state is CRITICAL.), (Recommended Action: Please check top five memory consumers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_13_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_13 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_0_PKT_MAXLEN_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on FIA to NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_VM_INTR_DM_REQ_TOUT_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_VM_INTR_DM_REQ_TOUT_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-ISSUL_CLIENT_REG_NOT_IN_PROGRESS
### Response:
(Severity: 4), (Category: INSTALL), (Description: The ISSU Lite registration APIs may only be called before the ISSU Lite wrapper library has bound to the underlying ISSU Library.), (Recommended Action: If the client is essential to the ISSU operation, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Otherwise retry the operation and / or proceed with the ISSU. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_GIFT-4-INTF_RETRY_NOTICE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The hardware configuration for some interfaces have not been applied; the system is retrying to apply the configuration. Hitting this error typically indicates that traffic on the interface will be affected until the hardware configuration has completed.), (Recommended Action: None, platform software will correct itself if this happens. Verify the PD programming using how gift db retry location <>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-TIMING_DRIVER_CONNECT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error. Frequency synchronization on is disabled.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-4-ERR_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the process. This resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-LINK_BAD_THREAD_PATH
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-SLOTID_PARITY_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA has detected that the slotid of the card doesn't have correct parity, this can becaused by backplane connectors that has been damaged due to bent pins.), (Recommended Action: Please inspect the backplane and card connectors for physical damages.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-3-XSN_TIMEOUT
### Response:
(Severity: 3), (Category: L2), (Description: The XSN access on PLIM ASIC failed due to a hardware or software error. %d - PLA ASIC instance. %s - description of the error details. %s - description of the software action to recover. %s - description of the recommended user action.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. Take the recommended user action as it is described in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_ASIC_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while initializing the CPU control ASIC to either receive packets from the fabricq ASIC or transmit packets from the ingressq ASIC. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If problem either persists (following a process restart) then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-6-INVMGR_CONN_SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: Successfully connneted to inventory manager.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAMSG-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: SPA related info), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-3-FAULTY_XFP
### Response:
(Severity: 3), (Category: L2), (Description: The XFP inserted encountered a fault condition when powering on.), (Recommended Action: Verify the XFP is supported in the hardware manuals and is inserted correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp confederation peers' command in IOS XR BGP configuration?
### Response:
The 'bgp confederation peers' command is used to define the sub-AS that are part of the confederation. It is used in conjunction with the 'bgp confederation identifier' command. The sub-AS numbers are local to the confederation and are not visible to external peers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-CARD_SEATED_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: CCC has detected that the card is not being seated correctly in the backplane of the chassis. This problem is preventing the card from booting.), (Recommended Action: Reseat the card to correct the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_5_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-6-INFO_USER_LOGOUT
### Response:
(Severity: 6), (Category: SECURITY), (Description: SSH vty user logged out.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_V6FIB_RP-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error during improper updation of variables or incorrect return stated in IPV6 FIB platform), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-DEPRECATED_PATH
### Response:
(Severity: 7), (Category: SYSDB), (Description: An operation has been attempted on a part of the SysDB namespace that should no longer be used.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HOSTNAME_SYNC-3-RUNTIME_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Error during event loop for hostname_sync daemon), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_BRST_SHRT_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA00 Tx burst short error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN-3-SYSDBINIT
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred when initializing the system database or we failed to scan the igmp snooping configs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error verbose<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error verbose<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2SNOOP-3-TIMER_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the L2SNOOP process sets up and initializes the various L2SNOOP timers.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_QAD_GET_DEPTH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to get the qad queue depth(number of packets in queue). This should be because of some issues with the indicated qad queue %p - QAD queue id), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_SSTAR-3-ERR_DRV_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl (sstar) driver detected an error during initialization.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-6-MK_OPERATION
### Response:
(Severity: 6), (Category: SECURITY), (Description: Type6 masterkey operation successful), (Recommended Action: Please check the status of type6 server with 'show type6 server')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SPI_VERSION_CHECK_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: The power-on switch programming from the SPI flash based configuration has in-correct version number.), (Recommended Action: Check SPI flash programming and install image with correct programming.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-4-ENV_MONITOR_DISABLE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This a warning message indicating the particular monitoring is disable via admin config.), (Recommended Action: Please verify whether the configuration change has been made.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWR_MGMT-3-IDPROM_READ_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: 'The IDPROM may be corrupted or in-accessible.'), (Recommended Action: Try restarting the process using CLI command in exec mode - process restart pwr_mgmt If the error exists try -remove and re-insert the PM If the error exists - Check Power Tray connections If the error exists - Replace the power module)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-2-LC_MEA_ALARM
### Response:
(Severity: 2), (Category: OS), (Description: Standing MEA Condition Exists on this line card), (Recommended Action: Remove the card from the Slot. Delete the pre-configuration manually Insert the card back again to clear MEA If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS explicit null label?
### Response:
The MPLS explicit null label is a special label with value 0. It can be used to signal to the penultimate hop router to perform penultimate hop popping (PHP) and forward the packet to the egress router without an MPLS header. It is advertised using the explicit-null command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-4-CFG_INIT_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This is a fatal error which would stop the process from verifying and applying configuration. The process will restart in an attempt to clear the error.), (Recommended Action: If the error message indicates a potential out of memory condition Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Gather 'show tech-support sysdb' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_SYSDB_SET
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq Sysdb Set error for the iqm configuration changes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_P2MP_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the P2MP auto-tunnel aborted since it would have exhausted the tunnel interface scale limit), (Recommended Action: Reduce the P2MP configured/auto tunnels to below the system scale limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: An error (other than EINTR) occured in the event loop. The process has exited and restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-LEVM_ENABLE_FD
### Response:
(Severity: 4), (Category: OS), (Description: EVM received an error from LEVM when enabling fd), (Recommended Action: This is an internal error and should be reported to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM_EA-3-DEBUG_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Debug message registration failed The component will be functional with a sole impact that its debugging will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-2-ASIC_FABRIC_LOCK_AQUISITION_FAILED
### Response:
(Severity: 2), (Category: FABRIC), (Description: 1. The number of fabric links available has crossed the the configured/default threshold. Failed to acquire a lock trying to bring down/up the front panel links.), (Recommended Action: Check the health of the ASIC fabric links health. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth feature?
### Response:
The MPLS TE auto-bandwidth feature allows MPLS TE tunnels to automatically adjust their bandwidth based on measured traffic flow. It measures the average output rate and adjusts the tunnel's bandwidth up or down based on a configurable adjustment threshold. Auto-bandwidth aims to right-size tunnels to actual traffic needs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-NSR_ROLE_CHANGE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred whilst IS-IS either during startup or changed NSR/ISSU role.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-MSG_SEND_EVENT
### Response:
(Severity: 7), (Category: HA), (Description: A msg_send_event call in a checkpoint mirroring function failed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-FSYNCDIR_CONNECT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error. This rack will not participated in Multichasiss Frequency synchronization.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLEAR-3-ERR_SYSDB_UNBIND
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to Unbind sysdb bind' ;), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-AIPC_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An internal error has been encountered and communication between l2vpn and its collaborator can not be established.), (Recommended Action: Please provide the exact error message seen on the console, collect a core dump of the running l2vpn_mgr process, and the show tech-support l2vpn output for further analysis of the error condition. To recover from this state, one may try 'process restart l2vpn_mgr' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NODE_IMDR_COMPLETED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Card transition to IMDR completion occurred.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-NBR_DOMAIN_CERT_VALID
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'The domain certificate of the neighbor device ' 'is validated successfully'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPI-3-PRIVILEGE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error has occured as process was unable to get IO privilege), (Recommended Action: Try to rerun the CLI, if it fails repeatedly contact support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-ISSUDIR_RESTART
### Response:
(Severity: 1), (Category: INSTALL), (Description: ISSU operation aborted because ISSU Director unexpectedly restarted and the ISSU operation could not be recovered.), (Recommended Action: The reason for this issu operation failure has to be analyzed. Check the issu operation log by 'show tech-support issu' to understand the reason for the operation abort. Collect the show tech logs by running 'show tech-support issu' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-ERROR_MESSAGE
### Response:
(Severity: 3), (Category: HA), (Description: Encountered an error condition.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-FD_NORMAL_LIM
### Response:
(Severity: 4), (Category: HA), (Description: --), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTT2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-4-OPERATION_ISSU_ABORT_DONE
### Response:
(Severity: 4), (Category: INSTALL), (Description: The ISSU has successfully executed its abort procedure and will hold on to the secondary VM until told otherwise for triage purposes.), (Recommended Action: The ISSU has been held following an abort to enable system level triage. When complete issue command <cmdBold>install activate issu abort cleanup<noCmdBold> or <cmdBold>install deactivate issu abort cleanup<noCmdBold> (as appropriate) to restore the system's RP redundancy and enable another ISSU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHOWTECH-6-INFO
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-0-LOG_EMERG
### Response:
(Severity: 0), (Category: OS), (Description: An Emergency message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-TDDR_FIFO0_PAR_ERR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: TxDDR 200 to 1875 FIFO 0 parity error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-3-CFGMGR_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: This mesage would indicate with reason of failure for saving/fetching configuration from config manager. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: This error indicates a problem in the code and cannot be easily recovered from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSH_CLIENT-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-NO_CMD
### Response:
(Severity: 6), (Category: SECURITY), (Description: An internal software error occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FC_FPGA-4-INTR_SET_INST
### Response:
(Severity: 4), (Category: FABRIC), (Description: An indication that an interrupt was raised on the IPU fpga on the FC.), (Recommended Action: NONE)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-EEMS_GUARD_WORD_VER
### Response:
(Severity: 7), (Category: HA), (Description: The guard word for the specified control block does not contain what is expected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_HEAP-7-NCT_BIGNEW
### Response:
(Severity: 7), (Category: HA), (Description: Higher layers of heap are requesting a size for a variable-size record that is too large.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_LOW_TEMP_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature less than or equal to the low temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_lite-3-ERR_PL_DLL_CHAN_CONNECT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to connect to PPP lite process channel fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA-3-LTRACE_INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An unexpected initialization error has occurred during initialization of ICPE Traces. The platform software should automatically recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-TTL_CFG_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to apply a TTL threshold config. The operation will be retried.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-CTP2_IMG_CORRUPT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: --), (Recommended Action: Install CFP2 fpd.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SHOW_REGISTERS_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: Could not get the registers context for the process being dumped. This could happen if a core dump is explicitly requested of a running or suspended process using dumpcore command. If not it is a bug.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-XFP_LNK_FAULT_ERROR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the XFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. Do XFP OIRs. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_NULL
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-3-NO_MEM
### Response:
(Severity: 3), (Category: IP), (Description: ARP was not able to allocate the memory that it needed to complete the operation. ARP functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: Please check if there are any memory leaks. If the issue is seen repeatedly Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-ID_CERT_EXPIRED_WARNING
### Response:
(Severity: 3), (Category: LICENSE), (Description: The registration for this device will expire at the specified time. This usually indicates a communications failure with the Cisco licensing authority), (Recommended Action: Please check the Smart Call Home settings and network connectivity to cisco.com. Or check if the Id certificate need to be renewed)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-INTERFACE_EXIST
### Response:
(Severity: 4), (Category: IP), (Description: IPv6 MA already has the interface being newly added in its internal store. This potentially indicates that IPv6 MA missed the delete from SysDB and Interface Manager for this interface & hence is out of sync.), (Recommended Action: IPv6 MA restarts in an attempt to recover from this situation, config should get applied on this new interface successfully. No further action should be necessary. If errors are observed, trying to unconfigure and reconfigure the interface in problem would help.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_2_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Tx power greater than or equal to the high Tx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Tx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-TRACK_GLOBAL_ENABLE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: This error indicates that it has not been possible to discover if frequency syncronization has been globaly enabled or not, and therefore whether or not the clock interface programming is complete.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALIDINPUTFMT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The Number output format specification is not in the number input format specification, so we are writing a number that we probably cannot read back in'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-DYING_GASP_USER_REM
### Response:
(Severity: 3), (Category: SNMP), (Description: SNMP user config has been removed under which snmp dying gasp host was configured.), (Recommended Action: Reconfigure SNMP user or remove snmp host config for that user)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-CARB_ENQDEQ_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter driver detected a carb enqdeq error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-QUEUE_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates shelfmgr failed to queue enqueue/dequeue the event specific to shelfmgr FSM. Shelfmr will retry the event.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_19
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_INFRA_SECONTROLLER-3-DEBUG_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The message indicates the failure in initializing the ltrace module or debug module.), (Recommended Action: Please provide the following logs: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - Show logging - show services secontroller trace reverse location <ISM>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-SYSDBMATCH
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DYNNIC_API-3-MULTIPLE_DRIVER_CFG
### Response:
(Severity: 3), (Category: L2), (Description: Virtio and E1000 drivers cannot both be configured for interfaces on the hypervisor. Some or all of the interfaces may not be enabled and pass traffic as a result of this.), (Recommended Action: Reconfigure all interfaces on the hypervisor to be of the same driver type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMIB-4-SYSDB_APPLY
### Response:
(Severity: 4), (Category: SNMP), (Description: verification for 'snmp interface subset' command failed because of some invalid input. Ifmib database is not updated because of this config but in sysdb, config might have happened. For recovering from this 'no snmp interface subset <subset-no>' is required.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-UNEXPECTED_MSG_TYPE
### Response:
(Severity: 7), (Category: SYSDB), (Description: We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGCLI-7-INFRA_READY
### Response:
(Severity: 7), (Category: MGBL), (Description: Config process is delaying applying configuration until infrastructure is ready.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does Cisco IOS XR support external AAA for user authentication?
### Response:
Cisco IOS XR supports external Authentication, Authorization and Accounting (AAA) using TACACS+ and RADIUS protocols. The router can be configured to authenticate users against an external AAA server. This allows centralized management of user credentials.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-BVI_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_NI_INTR_PW_STALLED_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_PW_STALLED interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-XAUI_1_FRAG_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported fragmentation error on TX side on bridge instance - 0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-RESET_ON_I2C_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the I2C server on the specified node encountered the specified failure. Shelfmgr will attempt to reset the board which sends the alarm.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-REMOTE_ACCESS_MAIN_PORT_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has detected a failure with the access main port and has attempted to failover.), (Recommended Action: Use the <CmdBold>show l2vpn iccp-sm<NoCmdBold> and the <CmdBold>show interface<NoCmdBold> commands to determine the cause of the interface mainport failure. Correct the failure for the given interface and the ICCP-SM fault will clear.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CFG_DELETED_INTF_OP
### Response:
(Severity: 3), (Category: L2), (Description: A notification from another part of the system indicates that some operation should be performed on an interface that does not exist in Interface Manager. The CFM Daemon's internal state will be updated in accordance with the requested operation, but no Maintenance Points will be created on the affected interface. This indicates an inconsistency between the Interface Manager and other infrastructure components.), (Recommended Action: Removing and re-applying the configuration responsible for the failed operation may help to resynchronize system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL_SIP700-0-INIT_FAILURE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The CPU Control driver failed to initialize. The effect is that the line card may not function or may not function appropriately. The CPU Control driver provides low level services on the SIP 700 Line Card (LC). These include, among other things, access timeout interrupt services and bus parity error interrupt services. If these services are not available then the driver process is exited, respawned and the initialization retried. The CPU Control driver is a mandatory process. If the initialization continues to fail after several retries the LC will not properly boot and will reset itself. This error is generally indicative of a larger LC-wide problem. %s - description of the specific failure encountered %s - error detail, if appropriate), (Recommended Action: This error is unlikely to occur by itself nor is it likely to be the root cause of the problem. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace location <>/<>/CPU0<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-NRS_DECODE
### Response:
(Severity: 7), (Category: OS), (Description: An internal NRS function failed when invoked from RDS library. The NRS library returned a failure when we queried on a handle.), (Recommended Action: This is a Debug message.No action required. If the problem persists,Contact Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-3-LINE_CONNECT_FAILURE
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to process connect request.), (Recommended Action: Disconnect and re-connect the (aux/console) cable of the corresponding port mentioned in the syslog properly. Check whether corresponding (aux/console) port is accessible or not after that.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_WDMON-6-INFO_LOG
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE_STR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_BAG_ENCODE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error in encoding the bag.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSUB_EA-3-ERR_EVENT_BLOCK
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An error occured in the event loop. The process will restart which should recover the situation.), (Recommended Action: System will retry to start the process. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-2-SEU_ERROR
### Response:
(Severity: 2), (Category: DRIVER), (Description: CCC FPGA detected SEU error on one of the cards. This is an indication that one of memory registers got corrupted with a single/multi bit error which is corrected or uncorrected. This can result in card going to POWERED_OFF state.), (Recommended Action: Try reloading the card using 'hw-module location <> reload'. If multiple card reload operation cannot fix the problem, check if physical OIR can address the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_DISKMON_SYSADMIN-3-DISK_ALARM_MAJOR
### Response:
(Severity: 3), (Category: INFRA), (Description: When some monitored disk's usage is above MAJOR Threshold Percentage.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_UPDOWN
### Response:
(Severity: 5), (Category: OS), (Description: An SR policy status has changed to up/down. If the policy has gone down, then a reason for its going down is also displayed. This message appears only if the <Bold>segment-routing logging policy status<NoBold> command is configured.), (Recommended Action: If policy went down, then use the reason as a hint to triage it further.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENV_AGT_DLL-3-MSG_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Provide the following CLI: (admin)# show env trace loc <target location> Wait 1 or 2 minutes)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-REMOTE_CORE_ISOLATION
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has detected isolation in the peer's core and has attempted to failover.), (Recommended Action: Use the <CmdBold>show iccp group group-num<NoCmdBold> command to determine which core facing interface has triggered the isolation failure. Correct the failure for the given interface, this will clear the ICCP-SM core isolation failure. Reference the ICCP-SM section of the IOS XR documentation for more information on core isolation failures and related configuration commands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-6-CF_OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Compact Flash entity is inserted into the RSP invmgr_agent collects the CF data whenever it is inserted.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_UNGET_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed while trying to get the FGID from the joined list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RIB_INIT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred whilst initialising the RIB for a new address family. This could be caused by failure to allocate resources or by errors when calling the Table Resource Manager or the RIB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LBO_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PHY controller driver detected a parity error.), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver failed to create an event manager during the driver initialization. The driver will be non-operational due to this error.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDSFS-7-INIT_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: RDSFS failed to initialize a module.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_DLL-3-TMU_ENTRY_ADD_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: At the NPU, adding a Table Mapping Unit entry for the region failed due to the reason indicated.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to set RSVP policy for TE tunnel?
### Response:
To set an RSVP policy for a TE tunnel, use the 'tunnel mpls traffic-eng policy' command in interface configuration mode. RP/0/RSP0/CPU0:router(config-if)#tunnel mpls traffic-eng policy Policy1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-3-INCONSISTENT_CONFIG
### Response:
(Severity: 3), (Category: L2), (Description: As part of trying to configure dot1q vlan with vlan id same as that of outer vlan of QinQ configuration on other sub-interface, then error has to be reported to remove the inconsistent config.), (Recommended Action: Upon seeing this message, delete the subinterface that has just been created. Otherwise the system will be in inconsistent state.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-EGRESSQ_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to create one of the egressq queues.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-3-RSP_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: MB application returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SVII_MGR-3-UNABLE_TO_RESYNC
### Response:
(Severity: 3), (Category: SERVICES), (Description: In order to correct any problems, the Service Infrastructure will reconnect to IM to prompt a resync. If this message is displayed then this resync is failing. This may cause configured interfaces to no longer forward traffic, or interfaces which have been shut down or deleted to continue to do so.), (Recommended Action: Firstly the process displaying this message should be restarted. If this fails to solve the issue, then the configuration should be removed and readded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-7-PATH
### Response:
(Severity: 7), (Category: INSTALL), (Description: An install path was found to be in error. The current install operation, or the Install infrastucture, will not be able to continue successfully.), (Recommended Action: Please check for disk corruption using 'fsck' disk check CLI and repeat the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-3-CAP_LKP_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'The Channelized Caps definition file is missing. There may have a packaging issue or someone just accidently removed that file.'), (Recommended Action: Please reload the corresponding Jacket Card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_SSHCONF
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd encountered some problem in generic nature or plain information. This message is not rate-limited.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-MUTEX_RESET_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed to reset a corrupted mutex. Restart the process.), (Recommended Action: If the issue is seen even after restart then, collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA_LTRACE_DLL-3-OPER_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: MFR EA ltrace dll operation failure The cause may be related to the symbol file corruption.), (Recommended Action: If message is continuously being seen, check with TAC support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QUEUE-7-NOTQ
### Response:
(Severity: 7), (Category: OS), (Description: An internal software error occurred.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MA-3-SYSDB_BIND_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 Management Agent encountered failure in binding to SysDB. It will recover itself by restarting. Typically this error is caused if sysdb is unavailable for an extended period.), (Recommended Action: If the problem persists get the output of show tech-support, show processes, show sysdb trace, show sysdb trace clientlib job <jid of ipv4_ma>, show ipv4 ma trace location <> from the location the error message comes from.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-3-ERR_CL_ASYNC_EVENT_BLOCK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error (other than EINTR) occured in the event loop to handle out-of-resource events. Affected process will not be able to handle subsequent events to recover from out-of-resource situation.), (Recommended Action: Affected process will require restart. Some process restart may trigger card restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-OUTGOING_PKT_TOO_BIG
### Response:
(Severity: 4), (Category: SECURITY), (Description: Trying to send an ISAKMP packet that is above the maximum UDP packet size allowed. That can happen if an inordinately large number of IKE policies were being proposed by the initiator.), (Recommended Action: 'Try to reduce the number of ISAKMP policies configured')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-DEST_TUNL
### Response:
(Severity: 3), (Category: FORWARDING), (Description: On some platforms, it is not allowed for a tunnel to be reachable through another tunnel. This is because the platform has to encapsulate the packet more than once on the same router. When this message is displayed, the user must change the tunnel destination or change the route for tunnel destination address. When this is corrected, the tunnel will re-evaluate its state and come UP if other criteria for tunnel to be up are satisfied.), (Recommended Action: Change the tunnel destination or change the route for tunnel destination. So that the tunnel destination address is reachable but not over another tunnel.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-INSTALL_WARNING_AUTO_ABORT
### Response:
(Severity: 4), (Category: INSTALL), (Description: The install operation will abort in the given time unless the user starts either the accept phase or the complete phase using the supplied instructions. The warning version is shown if the abort timer has 30 minutes or more left on it.), (Recommended Action: Please take necessary actions as per the supplied instructions.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRIVER_LITE-4-ERR_LTRACE_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: The Fabric driver could not open/initialize the ltrace buffer. The Fabric driver and the system should stll function as normal, with the exception that ltrace will not be available for sfe_drvr process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-RESERVED_INSTALLED
### Response:
(Severity: 6), (Category: LICENSE), (Description: None.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-UNSUPPORTED_LOCAL_RLOC
### Response:
(Severity: 4), (Category: IP), (Description: 'The platform has indicated it does not support local RLOCs of this ' 'address family.'), (Recommended Action: 'Deconfigure the RLOC, or move it to another xTR at ' 'the site which does not have this platform limitation.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-SVD_ERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-0-EMG
### Response:
(Severity: 0), (Category: OS), (Description: An EMERGENCY level message was emitted by QNET.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-TO_MRIB_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-BF_SBE_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA11 burst FIFO single bit error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-RX_CH_HI_PWR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a high power on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption from received cells.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-INSTALL_STATE
### Response:
(Severity: 3), (Category: OS), (Description: The installation state of the named virtual service has changed as notified by Virt-manager.), (Recommended Action: In the failed case, check Virt-manager's logs for the cause of the failure. In the successful case, this notification can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-CNET_FUNCTION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cnet function failed with reason below. %s- Message. %d-Failed reason value. %s- Message. %s- Failed function name.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-7-ERR_MSGLEN
### Response:
(Severity: 7), (Category: ROUTING), (Description: The process failed to read the message length.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SSE_NETIO_LIB-4-FINT_IDB_NOT_FOUND
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The FINT idb is not yet created in netio. This could be a transient condition.), (Recommended Action: Please capture the following information and if traffic loss also is being observed Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-NODEID_CREATION_FAILURE
### Response:
(Severity: 3), (Category: HA), (Description: Failed to create node id.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_LQ_SEQ_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 1 LQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: APIV data initialization operation failed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NODE_STATE_CHANGE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Card state transition occurred.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_IPCP_SCAN_IF
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error when scanning for IPCP configuration. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SubDB service, but the error could also be caused by low memory resources or programming error.), (Recommended Action: Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-MSG_REPLY_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The packet thread encountered an error when trying to send a reply to the main thread in the Ethernet Link OAM Daemon. The operation will not be retried - the internal state of Ethernet Link OAM may not match the global system state. This may be the result of a resource limit being hit.), (Recommended Action: Try resolving any resource limit problemss, and then restart the Ethernet Link OAM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NRSUTILS-3-NULLARG
### Response:
(Severity: 3), (Category: OS), (Description: A NULL pointer was passed as a fn parameter), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_THREAD_POOL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected fatal error during a RIB thread pool operation. See error message for more details.), (Recommended Action: If the error is due to lack of resources, attempt to free some up and then restart RIB. Otherwise Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-4-CFG_BDL_UNSUPP_CTYPE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: CFM is configured on a bundle with members from 40G/400G linecard where it is unsupported.), (Recommended Action: Please review bundle configuration and remove 40G/400G members for CFM to work correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-INIT_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An software error occurred while starting up of TCP process. If this occurred during process startup, then the process may be restarted.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C2C-3-NULL_PARAM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: NULL parameters are passed, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IM_BULK_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-MACSEC_SAK
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-AUTH_SUCCESS
### Response:
(Severity: 5), (Category: L2), (Description: Authentication was successful.), (Recommended Action: No action required (normal operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-TRACE_INIT_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver (sapire) seen error during trace file init. This could be due to ltrace infra issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_POLICY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error with route policies used by RIP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-UPDATE_ADDR
### Response:
(Severity: 3), (Category: OS), (Description: 'Failure in adding a node to a GSP group.'), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-SECURE_BOOT_NOT_ENABLED
### Response:
(Severity: 4), (Category: DRIVER), (Description: The Secure Boot feature for CCC bootflash images are not present in the card. This message is a reminder to the user that a FPD upgrade operation is required to enable this feature.), (Recommended Action: Use 'hw-module location all fpd all' command to initiate upgrade of CCC bootflash with Secure Boot enabled images.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-MSG_CHAN_CONNECT
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when attaching a handler for an Event Manager asynchronous event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_LIB-7-INVALID_ARG
### Response:
(Severity: 7), (Category: HA), (Description: A wdsysmon library was called with an invalid argument.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_DRV-6-MEM_SIZE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Information related to physical memory start size and memory size is displayed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL-3-CHUNK_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: memory allocation failed due to low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_FSM_TIMER_EXPIRED
### Response:
(Severity: 6), (Category: INSTALL), (Description: The ISSUMgr FSM timed out on some node(s) during the ISSU/iMDR operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-MFI_DISABLE_FREE_ERR
### Response:
(Severity: 6), (Category: ROUTING), (Description: An error occured while processing something from or to LSD This is a fatal error and the IS-IS process will abort or become inconsistent), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD_SYSMGR_MON_LIB-3-SYSMGR_DEBUG_REGISTER_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: vm-monitor failed to register debug.), (Recommended Action: This indicates an vm-monitor process is hung or unable to communicate with sysmgr.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-4-ERR_FLED
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabric LED internal software error occurred. It is possible to continue operation, although some LEDs on fabric led board may incorrectly illuminate. However, if this functionality is necessary then restart the process by issuing the following command at the CLI of the active RP after collecting all the output of all the specified commands. 'admin process restart fsdb_server loc <loc>' *SUPPORT*), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEV2-3-CONFIG_APPLY
### Response:
(Severity: 3), (Category: OS), (Description: The sysdb 'backend_applyonly' function returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-NP_INTERACTION_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified interaction with NP driver process failed with the given reason.), (Recommended Action: Please collect output of the following commands: show platform show install active show log show controller np summary all location <> show tech-support np location <> file <path_to_file>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-6-TRACE
### Response:
(Severity: 6), (Category: IP), (Description: The XR socket library failed to successfully initialize its trace buffers. The library will continue to work as expected but will not be tracking events or errors which occur.), (Recommended Action: The socket library should function as normal, so no action is required unless other symptoms are observed. Restarting the affected process will cause it to reopen its trace buffers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the main differences between OSPF stub areas, totally stubby areas, and NSSAs?
### Response:
The differences between OSPF stub area types are\n- Stub: Blocks external (type 5) LSAs, advertises default route\n- Totally stubby: Blocks external and inter-area (type 3/4/5) LSAs, advertises default route\n- NSSA (Not-So-Stubby Area): Allows external routes in a stub area using type 7 LSAs, converted to type 5 by ABR\n- Totally NSSA: NSSA that also blocks inter-area (type 3/4) LSAs\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCM-4-SIGFAULT
### Response:
(Severity: 4), (Category: L2), (Description: Connection Traffic Table manager kicked the bucket, an overflow condition reached.), (Recommended Action: Collect required info and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-2-ERROR_ENCOUNTERED
### Response:
(Severity: 2), (Category: OS), (Description: SHMWIN hit an error, which is described by the description printed. This error indicates that the shared memory window library detected a service internal error condition. This does not mean a service impacting condition.), (Recommended Action: If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show memory location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE6_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE6_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GCP_LPTS_PIFIB-7-ERR_DEBUG_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug. The facility to debug the component may not work.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_COPY_CRL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOSLIBTIF-6-ALE_ATTRIB_VAL
### Response:
(Severity: 6), (Category: QOS), (Description: While validating the AAA attributes provided by the template manager, received incorrect value pair for Access Loop Encapsulation.), (Recommended Action: Subsciber sessions are allowed to be created even if the ALE attribute-value pair is invalid. ALE attribute values with which the session creation was attempted can be seen with commands provided in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth adjustment threshold feature?
### Response:
The MPLS TE auto-bandwidth adjustment threshold feature specifies the percentage difference between the current tunnel bandwidth and the measured output rate that triggers an auto-bandwidth adjustment. A lower threshold means auto-bandwidth adjusts the tunnel bandwidth more frequently, while a higher threshold means adjustments occur only for more significant rate changes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_RIB-3-ERR_PROTO_MODIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered in the call to ipv4_rib_protocol_modify.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACLEARN-3-THREAD_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: maclearn thread exited unexpectedly.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP maximum-prefix in IOS XR?
### Response:
BGP maximum-prefix in IOS XR is configured to limit the number of prefixes received from a neighbor and to take action if the limit is exceeded. router bgp 65000
neighbor 192.0.2.5
maximum-prefix 1000 80 restart 30
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-RIB_ECMP
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to update RIB after an ECMP recalculation.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-EXT_TCAM_LIMIT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This message will typically occur when permissible region size is exceeded or another internal error has occurred during TCAM entry installation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-MGD_TIMER_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP temperature less than or equal to the low temperature warning threshold. The SFP is the pluggable optics on the line cards. The temperature threshold values are read from the SFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the SFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-4-CFG_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: ssm_config_init failed due to sysdb intialization problem.), (Recommended Action: Collect all logs, especially those from SSM. Forward the messages to technical support. Also collect show tech sysdb , show tech ssm 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-STANDBY_RESTART
### Response:
(Severity: 4), (Category: L2), (Description: The PVSTAG-IO process on the standby card was unable to synchronize its state with the active card. The standby process will restart in order to force a resync. As this only affects the standby card, there is no impact on traffic flow or on regular PVSTAG operation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-SHUTDOWN_ON_I2C_ALARM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being powered-down and moved to IN_RESET state due to occurence of specified I2C alarm on its board.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_0_RX_FRAME_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-0 received an errored frame interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-PROBLEM_EXITING
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured when notifying the System Manager that the pvstag-io process was about to exit. In rare cases, this could result in the System Manager failing to restart the process when it ought to do so.), (Recommended Action: If PVSTAG is configured but the pvstag-io process is not running on a particular line card, attempt to restart it using the 'process restart pvstag-io location ...' command. If this does not solve the problem, remove all of the PVSTAG configuration, commit the change, then re-apply the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATMGCMGR-2-DBG_INIT
### Response:
(Severity: 2), (Category: L2), (Description: A failure occurred during the initialization of the debug events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-INFO_SHM
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered a change in the shared memory region parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA_LTRACE-3-ERR_INIT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA ltrace lib failed to initialize the error ltrace This has zero impact on the functionality.), (Recommended Action: This message should not occur everytime. Check for memory conditions on the node. Contact TAC, in case it persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_FPGA_UPGRADE-2-BOARD_HW_DBG_MODE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This board is running in hardware debugging mode. Some features such as FPGA image failover mechanisms, watchdogs, and envmon shutdowns are disabled in this mode. It is intended for HARDWARE DEBUG use only. It should NEVER be running XR in this mode for any other purpose. Unpredictable behaviours and unexpected errors may occur while running in hardware debugging mode.), (Recommended Action: - power disable the board using the following admin configuration command: hw-module power disable location <board> - Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does configuration navigation work in IOS XR?
### Response:
IOS XR supports hierarchical configuration navigation similar to IOS. You can move between configuration modes using commands like 'interface', 'router', 'line', etc. The 'exit' command moves up one level, while 'root' returns to the top level global configuration mode.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-EDM_INIT_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to initialize EDM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'pw-class' command in IOS XR L2VPN configuration?
### Response:
The 'pw-class' command is used to define a template for pseudowire configuration. It allows you to specify common pseudowire attributes such as encapsulation type, control word, and preferred path. The 'pw-class' can then be applied to multiple pseudowires, simplifying the configuration and ensuring consistency.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-4-PORT_REINIT_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Port will not operate reliably), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD-7-DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a debug message from FPD operation.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_PWHE-3-EA_RETRY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The PWHE EA has failed to program a pwhe interface after 1 or more retries.), (Recommended Action: Shut/no-shut the pwhe interface, or if needed, remove and re-create the pwhe interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-NODEID_TO_STR_EXTERNAL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Either an invalid location is being queried, or the infrastructure is behaving incorrectly. The MBI operation in progress might not be carried out. %d - indicates the location of the error. %s - indicates the error message.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-LINK_ORDER_NOT_CONVERGED
### Response:
(Severity: 4), (Category: L2), (Description: The local system has been unable to form a consistent set of Link Order Numbers from the data supplied by the LACP partner. This means that the links may not be ordered identically on the two ends of the bundle.), (Recommended Action: Shut and no-shut the bundle interface may clear the condition. If the error persists, shutting down all member interfaces and the bringing them up individually may clear the condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-3-ID_MGR_INVALID_REMOVE
### Response:
(Severity: 3), (Category: L2), (Description: L2VPN ID Mgr keeps track of IDs for different features. A key was attempted to be removed that it does not know about.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is BGP Policy Accounting and how is it configured in IOS XR?
### Response:
BGP Policy Accounting allows counters to be assigned to RPL policy statements. These counters increment each time the corresponding policy statement is executed. This provides visibility into how many routes are being affected by each policy statement. It is configured using the 'set traffic-index' command in the policy statement.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_RIB_PATH_NOMEM
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS was unable to install a path to the specified network in the RIB because the RIB encountered a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALARM_MGR-3-ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error message), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp enforce-first-as' command in IOS XR BGP configuration?
### Response:
The 'bgp enforce-first-as' command is used to enforce the first AS for eBGP routes. When enabled, BGP will discard incoming updates received from eBGP peers that do not list their AS number as the first AS in the AS path. This is a security feature that prevents a misconfigured or malicious BGP speaker from injecting routes with an invalid AS path.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-RESYNC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error occurred while processing a resync from Interface Manager. If this message is repeatedly seen then the software packet path on this node may be broken.), (Recommended Action: The process will reconnect to Interface Manager and try to recover. If this message is not seen again then the issue has been recovered and no further action is required. If this message continues to be seen Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_THREAD_MUTEX_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while creating a mutex for use by a client with the specified ID. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If the problem is experienced only by this process in the system, restart the fabric server process by executing the following command at the CLI of the active RP: process restart fab_svr location <loc> If problem either persists (following a process restart) or also noticed on other processes then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WATCHDOG-6-INFO_LOG
### Response:
(Severity: 6), (Category: INFRA), (Description: This is an information log.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-TCP_NETWORK_COMMS
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred whilst trying to set an option on the TCP socket used for this connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The router can continue to be used.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_CLNS_CLIENT_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to initialize its interface registration process wth CLNS It requires a restart of process for recovery.), (Recommended Action: Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: VPA Ether driver general info.), (Recommended Action: show asic-error plim asic .. loc <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-GROUP_CONFIG_UPLOAD_LOCAL_AAA_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: An error occured while the IKE process was uploading its localy configured groups to the localy running AAA server. This means that the system is in inconsistent state. the IKE groups that are seen in the running config are not configured in the local AAA DB that can be seen using 'show aaa ikegroups'.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a prefix list in IOS XR?
### Response:
To configure a prefix list for route filtering, use the 'prefix-set' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#prefix-set
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_TRAFFIC_ALERT_CLONE-1-QUEUE_FULL
### Response:
(Severity: 1), (Category: SERVICES), (Description: A clone request is to be enqueued as the producer is not available to handle ens request. Enqueuing a clone request to alert clone queue failed due to queue size limit.), (Recommended Action: Check the reason why producer (afmon_ea) has not been ready for a long time. Please collect 'show tech-support performance-traffic' and contact Cisco technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-4-LOG_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: A warning message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-ALL_FANTRAYS_OFF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Two possibilities to this message 1) An alarm has occured. Software cannot access all fans from all trays. This could be caused by fan tray loss power or individual fans were not running. User will have 45 seconds to replace a fan tray. If no action is taken within 45 seconds, the chassis will be shut down. 2) A previously occured alarm has been cleared. Software has detected that all fan on all trays failed condition is cleared), (Recommended Action: Two possibilities to this message. 1) An alarm has occured : Replace or OIR a fan tray within 45 seconds. 2) A previously occured alarm has been cleared : *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-INTFS_EXCEED_MAX
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Any interfaces in XR_INTERFACES beyond the maximum will be ignored.), (Recommended Action: Reduce the number of interfaces in XR_INTERFACES.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install rollback command in IOS XR?
### Response:
The 'install rollback' command is used to revert the system back to the previously committed software set. This is useful if issues are encountered after performing an installation or upgrade.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM_API-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFM encountered an memory allocation error), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-SYS_SERV_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred while IS-IS execute system service functions as in PM, DS or ISSU services.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-3-MSG_TOO_LARGE
### Response:
(Severity: 3), (Category: OS), (Description: MB-XR message is too large.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-5-OIR_REMOVED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PARTITION_USAGE_ALERT
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: A partition is monitored for critical usage levels. This ios_msg is raised when a) The monitored partition reaches a pre-set critical usage percentage b) At regular percentage intervals after the reaching the critical point), (Recommended Action: Contact TAC for further support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-MISSING_PLANE_CONFIG
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator server: insufficient S2 instances configs in fabric plane), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T3E3-4-PM
### Response:
(Severity: 4), (Category: L2), (Description: Performance Monitoring Related Warnings. Failed to get local time.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CARD_REIMAGE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Reimage operation on the indicated card has failed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-BUS_CRITICAL_THRESHOLD_EXCEEDED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-PAK_FROM_ISIS_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS was not able to process a packet from ISIS successfully and hence dropped the packet.), (Recommended Action: This message could be seen under low packet memory conditions and should recover once packet memory becomes available to CLNS. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: Optics Driver Initialization failed. Process Manager will restart the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SMP_PREDONE_REG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Slice manager proxy failed to register with CFGMGR for local pre done notification. This impacts the fast boot path.), (Recommended Action: Reload LC. If this condition persist after reloading LC, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_UV-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of the process. This may result in the restart of the process. The failure could be one of the following: - Event Manager - Debug Library - LWM bind Module - Sysdb verification registration - Data Storage Module - Detach pulse handler), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_DSC
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Status Database server (FSDB) failed to communicate with the DSC server. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVDPMEM-3-BAD_RETURN_VALUES
### Response:
(Severity: 3), (Category: OS), (Description: Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-3-MUTEX_OP_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'process may be restarted to recover after the running core of the process is collected')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ERR_RETRY_TRANS_REG
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_linux-4-SPAWN_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: pcmciad spawns filesystem process and cardmgrd. One of them died and its respawn failed. After this, disk media might be unavailable or OIR would fail.), (Recommended Action: If this message is seen and boot device is not accessible, please restart the pcmciad process to recover. Please take 'show process files <jid of pcmciad> details' and running core of pcmciad process before restart. Please send information to TAC for further investigation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-NSF_CHKPT_ACCESS_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected error occurred whilst IS-IS was accessing entries in the specified checkpoint table. If this error occurs during an NSF Cisco restart then that NSF restart may be aborted in favour of a traditional restart. If this error occurs during normal operation then the relevant checkpoint table may not be correct, and a subsequent NSF restart may not succeed. If however the error does not recur then the checkpoint tables should synchronize. The error may be caused by a low memory condition or through programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RASF-4-DLL_REG_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The given cerrno dll could not be marked for use. This does not change the functionality of the system but does obscure the meaning of error codes presented by this part of the system.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative. Functionality of policy_repository is not affected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-SITE_REGISTRATION_LIMIT_WARNING
### Response:
(Severity: 4), (Category: IP), (Description: 'Site registration count has reached or exceeded ' 'the configured threshold. This is used to warn the ' 'adminstrator that corrective action may need to be ' 'taken to avoid reaching the configured site registration ' 'limit.'), (Recommended Action: 'No immediate action is required. Administrator may ' 'want to consider whether ETR registrations should ' 'be limited, or capacity provisioned to accomodate ' 'growth in registration count.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-OIR_REMOVED
### Response:
(Severity: 5), (Category: L2), (Description: For displaying SPA OIR.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_PKT_F2_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 2 multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-UNEXPECTED_DB_CONVERGE_COUNT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The state where number of rib-dbs converged is greater than rib-dbs is unexpected and has been reached due to an incorrect computation. This condition will prevent NSR sync-done notification from RIB to its clients on standby RP.), (Recommended Action: To troubleshoot this issue collect how tech rib' before attempting recovery. To recover from this state restart ipv4_rib process or ipv6_rib (depending on AFI) on the standby-RP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-4-LOOP_INCONSISTENT
### Response:
(Severity: 4), (Category: L2), (Description: STP Loopguard feature moves a non-designated port to Loop inconsistent state when it stops receiving bpdu's on this port.), (Recommended Action: The problem might be due to software or hardware issues. Wait for a few minutes to see if problem clears or the port gets UDLD err-disabled. If not, file ddts with relevant info and continue. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Zl30160_ERROR-3-ERR_SHM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in ClkCtrl driver due to shared memory could not be opened.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM_API-7-DEBUG
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The BFM's debug message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLARP_LITE-3-ERR_CSL_DLL_ASYNC_SEND_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Attempt to send pulse to SLARP lite process fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-REDUNDANT_MAC_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Redundant mac create update for already created MAC object in Bridging.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-PROCEVENT_REGISTER
### Response:
(Severity: 3), (Category: OS), (Description: Unable to register with enf for sysmgr proc events.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-3-STATUS_MUTEX_UNLOCK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The ST16550 UART driver was unable to unlock the status variable for the interrupt thread.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ bias less than or equal to the low laser bias alarm threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-POLICY_NHOP_WRONGAFI
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified route-policy (or a policy applied by that policy) is configured - perhaps on a neighbor or for redistribution - and it is attempting to set the next-hop of the specified route to an address that doesn't match the address-family of the route. For example, it might be setting an IPv6 next-hop on an IPv4 route. Since this does not make any sense, the attempt will be ignored, and the next-hop will not be changed. (Note that this message is rate-limited, so it will not appear for every single route that is affected). Use the command 'show rpl policy <name> attachpoints' to determine where this policy is in use. Use the command 'show rpl policy <name> uses policies' to determine which other policies this policy applies (since the relevant 'set next-hop' may be in one of these policies).), (Recommended Action: Modify the policy so that it sets a next-hop that matches the type of route it is modifying.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-7-ERR_LTRACE_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID Server Could not open the annunciated ltrace buffer. The FGID component and the system should function as normal, with the exception that ltrace will not be available for fgid_server process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_OUTPUT-3-ERR_PKT_QUEUE
### Response:
(Severity: 3), (Category: IP), (Description: The FHRP Output process failed to queue an event to the Packet thread. The FHRP Output process will attempt to recover and retry. Clients of the FHRP output process (such as HSRP and VRRP) will observe inconsistent behavior until this is resolved.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XML_INFRA-7-INTERNAL
### Response:
(Severity: 7), (Category: MGBL), (Description: The XML Service Library has detected an internal error. As a result, the XML operation that was requested has not been completely carried out.), (Recommended Action: Repeat the XML operation, transient errors should have passed, and in all likelihood, this operation will go through. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-1-STANDBY_READY
### Response:
(Severity: 1), (Category: HA), (Description: RMF has determined that the standby card is ready to take over as active card if it needs to.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-5-LINK_SHUT_DOWN
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Spanning Tree Port's state change by manual intervention.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_ENCAP_DB-2-TUN_REFCOUNT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: tunnel refcount goes -ve or tunnel is invalid), (Recommended Action: The following needs to be collected and DE team to be contacted. show encap-id platform egress-db all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ARG
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Invalid argument has been passed to the function'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_EVM_CREATE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA failed to create its Event Manager which is a critical resource for the operation of the process. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ASYNC_POLICY_UNSUPPORTED
### Response:
(Severity: 6), (Category: ROUTING), (Description: Async policy is unsupported for this address family.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPP-3-IMC_CONTEXT_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system has hit a unexpected scenario when the MPP (Management Protection Plane) communicates with the Interface Manager Client(IMC).), (Recommended Action: If the message recurs, Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mgmt-plane trace client <clientname> both<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mgmt-plane trace client <clientname> both<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-FIXME
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Somebody called a SyncAgent API function that has yet to be implemented.), (Recommended Action: Update the software image on all nodes to use released software instead of this bogus developer's version)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-HW_RESOURCE_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is a message in FIB platform to indicate that engine layer identified an warning related to HW resource/s while programming an object in h/w.), (Recommended Action: Please collect the console log, show tech-support cef platform. Please check for any new configuration done on the device. Match the scale on device with supported scale. This is not a HW programming error but a warning condition that needs to be monitored for the given table and transition and report any abnormal behavior to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP update delay feature?
### Response:
The BGP update delay feature allows a delay period to be configured before a BGP device sends its first updates after establishing a peering session. It is configured with the bgp update-delay command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-SSC_SEND_SRV
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a single message to the Service Director. The Service Director may not be up to date with the state of this services on this node, so the associated SESVI interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the SESVI EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-BOARD_SEATING_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No RSP is detected in the system by the LC. Most likely bad board.), (Recommended Action: The problem can be corrected by reseating the board a few times. If problem persists after couple of reseats, it is an indication of a hardware failure. Contact TAC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RD_UNLOCK_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to unlock an entry in the BGP RD Table database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-6-ACCTRC128B
### Response:
(Severity: 6), (Category: L2), (Description: A CPP access was traced), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option lockdown feature?
### Response:
The MPLS TE path-option lockdown feature disables reoptimization of a tunnel if its current path option is configured with the lockdown option. This prevents a path option from being changed even if a better path becomes available. It provides path stability and predictability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-4-WARNING_GENERAL
### Response:
(Severity: 4), (Category: SECURITY), (Description: SSH encounterd some warning.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-5-ADJ_RESET
### Response:
(Severity: 5), (Category: IP), (Description: This action does not remove the communication path to the neighbor. The connection is restarted with the neighbor. All mapped ports previously in UP state are placed in DOWN state while maintaining locally published rates. Any unmapped ports in UP state are released. Actions which can cause this are as follows: 1) User requested a soft reset of adjacency using the cli clear ancp nei ... state, 2) User locally altered the configured timer for this neighbor, 3) Upon receipt of ANCP protocol 'reset ACK' message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-2-DATA_QUEUE_FULL_RECOVERED
### Response:
(Severity: 2), (Category: ROUTING), (Description: Error indicated by the DATA_QUEUE_FULL message has been recovered.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-WRAP_SCALE
### Response:
(Severity: 7), (Category: OS), (Description: Internal debugging message.), (Recommended Action: Informational only. Indicates card has less system memory)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-ASIC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAOC768_API-3-CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: PLAOC768 system checkout Library encountered a critical error which involves exiting the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: This message indicates process or system is running short of memory. SysDB will not operate correctly in low memory condition.), (Recommended Action: Check the overall process and system memory usage. If it pertains to the process showing the error, then restarting the process may fix the problem. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-ITEM_NOT_FOUND
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_DLSYM
### Response:
(Severity: 3), (Category: OS), (Description: The interface library is not availble.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the command to display OSPF database information in Cisco IOS XR?
### Response:
To display OSPF database information in Cisco IOS XR, use the command 'show ospf database'. This will display a summary of the LSAs in the OSPF database, categorized by LSA type. You can also specify a particular LSA type (router, network, summary, etc.) to view more detailed information.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-NETWORK_START_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: This failure encountered when the network start of packet couldnot be obtained.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_REDDRV-3-CONN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Connecting with message channel for event processing got failed.Please refer the error in message for more details.), (Recommended Action: : Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-6-UPGRADE_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message related to the Canbus Controller upgrade process on the specified location.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-4-WARN_REGISTER
### Response:
(Severity: 4), (Category: IP), (Description: Registration for an IOSXR service failed during VRRP's operation. This may indicate a connection failure with the IOSXR service as indicated in the error message.), (Recommended Action: Restart the VRRP process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR handle configuration when replacing a node with a different type of node?
### Response:
When replacing a node with a different type of node in IOS XR, the system automatically removes the configuration specific to the old node and applies the default configuration for the new node type. Any additional configuration must be manually applied.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G8032-3-APS_CHANNEL_INACTIVE
### Response:
(Severity: 3), (Category: L2), (Description: A ring node has not received R-APS messages on the APS channel for an extended period of time. A properly functioning ring will have an R-APS message transmitted nominally every 5 seconds. This indicates that the requesting (transmitting) remote node on the ring, such as the RPL owner, has gone down or there is a network connectivity problem with the APS channel.), (Recommended Action: Confirm the remote node is transmitting R-APS messages and that there is network connectivity on the APS channel between the remote node and this node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-HARD_RESET
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ST16550-6-STAT_CREATE_ERROR
### Response:
(Severity: 6), (Category: MGBL), (Description: The ST16550 UART driver was unable to create a file to store statistics. Show statistics command would fail. We can still see the statistics content from core file.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-ENET_INIT_DEVICE_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Failure to perfom the ethernet device intilization due the error as explained in the log. %d- Error %s - Explaination), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the two levels of routing hierarchy in IS-IS?
### Response:
IS-IS uses a two-level hierarchy: Level 1 (intra-area) and Level 2 (inter-area). Level 1 routers know the topology of their area and can route within the area. Level 2 routers know the Level 2 topology and can route between areas.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPABRG-3-HW_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Marmot spabrg driver error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-OOR_PER_INTERFACE_ROUTE_INTERFACE_LIMIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: This interface has reached the maximum value for the number of states. This will stop the creation of ole's which can then affect traffic flow Steps should be immediately taken to reduce the number of states or to configure a higher maximum value.), (Recommended Action: Consider reducing the number of states, or consider increasing the maximum value for this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_TEMPERATURE_ALM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when a high temperature alarm occurs on satellite.), (Recommended Action: Contact engineering with output of cli: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(RP)# admin show temperature | b SAT<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(RP)# admin show temperature | b SAT<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_LIB_INIT_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver cannot initialize the ASIC error infrastructure for recording ASIC errors and interrupts. The node is compromised in handling those errors.), (Recommended Action: Collect all the event logs and 'sh controller fabric trace driver all location <location of the node>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-INVALID_PLATFORM_TYPE
### Response:
(Severity: 3), (Category: DRIVER), (Description: IOFPGA driver cannot handle the detected IOFPGA platform type.), (Recommended Action: This error is seen when there is a problem in internal software coding, it should not be seen under normal operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CISCOSYSTEMMIB-3-TIMER
### Response:
(Severity: 3), (Category: SNMP), (Description: Timer error has occured), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-THREAD_API_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An internal error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON-3-FAIL_TO_INIT
### Response:
(Severity: 3), (Category: INFRA), (Description: An unrecoverable error occurred during watchdog monitoring service initialization. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-CONFIG_SCRIPT_EXCEPTION
### Response:
(Severity: 4), (Category: MGBL), (Description: An unhandled exception was encountered whilst loading a script. If this script is in running configuration, further commits will be blocked until the script is fixed, else, the current configuration will be rejected. No validation will be performed by the script until the script is fixed.), (Recommended Action: The script may have been loaded due to a modification to the current script configuration, or due to modification to the script file. Further details of the exception may extracted by querying the Yang model, using the command <CmdBold>show yang operational config-cfgmgr-oper:config global config-valid-ccv-oper:validation script-execution<noCmdBold>. Further warnings may be suppressed by unconfiguring the script, or by fixing the source of the exception.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAW_LIB-4-MUTEX_FAIL
### Response:
(Severity: 4), (Category: MEDIA), (Description: A mutex un/lock failed for the reason cited in ()'s. If a lock operation fails, subsequent accesses to nvraw will be aborted. If an unlock operation fails, the behavior is dependent on the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-HARD_RESET_UNBLOCKED_BY_FIA
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Hard reset recovery action is unblocked because FIA came online. hard reset will be perfomred.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-3-DB_DELETE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: A user requested that an object be removed from a database in which it was not present. The process should recover from this event, but it may indicate an internal inconsistency which could cause other problems.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-GASP_INIT_ACC_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver (sapire) seen error during GASPP init access. This issue is related to GASPP infra / Debugging infra. It wont affect normal working of the device.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBMA-0-SVC_EMERG
### Response:
(Severity: 0), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-EBS_CPU_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: EBS to CPU FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-1-MBIT_ECC_ERROR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: SPA Bridge ASIC detected a MultiBit uncorrectable ECC error.), (Recommended Action: Reboot the card. If the problem persists, report the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_TP_NETIO-3-DEBUG_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Teleport Netio DLL failed initialization or registration with the debugging subsystem. This resulted in the restart of NetIO process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-CBC_UART1_FILE_DESC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Informational log only), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-OUT_OF_RESOURCE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Resource limit has been hit), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes msdp detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes msdp detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Using the Job ID from the above command, please run the following command: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show processes memory <Job ID> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show processes memory <Job ID> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show memory summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show memory summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-4-INSTALL_BOOT_HOLD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The card is being held at boot stage while an XR install operation is in progress. The card will be held down until 'install commit' is performed.), (Recommended Action: Complete the install transaction.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-INFO_STARTUP_FINISH
### Response:
(Severity: 6), (Category: ROUTING), (Description: Startup state-machine controlled startup process ends here.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON_EA_OOR-4-LC_FLOWS_OOR_GREEN
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-API_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information %s - debug message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-3-INVALID_SLOT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-MA_NOMEM
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The Tunnel-IP MA process could not allocate memory needed to update tunnel interface.), (Recommended Action: Check the router for processes with excessive memory in the location as seen in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_UV-3-EVENT
### Response:
(Severity: 3), (Category: L2), (Description: An error occured in the system level event detection loop, which couldn't be corrected automatically in the next iteration(run) through this loop. The process must exit under this circumstance.), (Recommended Action: Identify the location of the card where the error was reported. We would need to check if there is sufficient memory available on the card present on the slot.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESSION_MON-3-MEMORY
### Response:
(Severity: 3), (Category: SNMP), (Description: iedgemon failed to allocate the required amount of memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_FAILURE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-4-WARNING_FIPS
### Response:
(Severity: 4), (Category: SECURITY), (Description: The sshd encountered a warning condition.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-3-FAIL_LDPATH_UPDATE
### Response:
(Severity: 3), (Category: INSTALL), (Description: The Install Helper failed to update the LOADPATH for the node.), (Recommended Action: Please run 'install verify packages' to check for loadpath corruption on all the nodes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-3-ERR_FGID_SET
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID BCDL Consumer encountered an error while setting S2 or S3 bitmap. This indicates a problem with the communication between the SFE driver and the FGID BCDL consumer. The FGID BCDL consumer and/or SEA driver may need restarting if the errors persist.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-LR_PLANE_TIMER_FIRED
### Response:
(Severity: 3), (Category: OS), (Description: LR Plane timer fired. Premature declaration of LR.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Arbiter driver Event Manager event block error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-FEATURE_DEACTIVATED
### Response:
(Severity: 4), (Category: OS), (Description: A feature is deactivated because it couldn't get platform information from a new platform library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AVPAIR-6-ERR_BAD_LIST
### Response:
(Severity: 6), (Category: OS), (Description: An illegal attempt to reinitialize an avpair list), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-GEN_CRIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Critical Error in PCIE Operation), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-INSTORCH_STATE_REPEAT
### Response:
(Severity: 3), (Category: INFRA), (Description: Errors during an install operation have lead to the same state being executed multiple times. Due to the state of the install operation, the only available recovery action is to retry the action being performed.), (Recommended Action: Restart install processes using 'process restart instorch location all' and 'process restart instorchagt location all'. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_AGT-3-INST_MGR_COMM_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: ISSU Agent is unable to send a message to Install Manager via the OCU Notification CAPI service. This suggests that there is an issue with ISSU Agent's connection with that service.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-INIT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize I2C. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-2-ROLE_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Notify the reason of node reload due to pair role mismatch.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-EDM_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS show command failed to initialyze the EDM server. 'show' command will likely fail, although CLNS should be able to operate.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-6-CHKPT_STAT
### Response:
(Severity: 6), (Category: ROUTING), (Description: The MRIB encountered error while trying to retrieve stats from checkpoint data.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you configure PM in Cisco IOS XR?
### Response:
To configure PM in Cisco IOS XR, use the 'performance-mgmt' command followed by the entity (such as interface or protocol) and the statistics to be collected. You can also configure the collection interval and threshold values for the statistics.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'passive-interface' command in OSPF?
### Response:
The 'passive-interface' command is used to control the advertisement of OSPF routing information. When an interface is configured as passive, OSPF routing updates are not sent out that interface. However, the network of the interface is still advertised. This is commonly used on interfaces connecting to end hosts or external networks to prevent unnecessary OSPF traffic.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-INCONSISTENT
### Response:
(Severity: 4), (Category: ROUTING), (Description: The internal state representing the configuration was invalid, but has now been fixed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLEAR-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to bind to action/gl path' ;), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-CLOCK_PORT_CONFIG_NOT_SUPPORTED_IN_HARDWARE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The synchronization ports 0/1 do not support gps-tod-input. Likewise the synchronization port 2 does not support bits-input, bits-output and DTI modes.), (Recommended Action: Do not attempt to configure RSP clock interfaces in the above mentioned modes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOL_DEMA
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKEND-3-APPLY_ERR
### Response:
(Severity: 3), (Category: SYSDB), (Description: This message indicates applying configuration failed for the item shown in the message. As part of CLI configuration 'commit', use CLI 'show configuration failed' to view this error and failed configuration.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-6-PARTNER_IS_UP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Reddrv has been told that a node is up. Inform sysldr.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIGEDM-3-FAILEDLIST
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Config library failed to add node to the given list with the reason mentioned in the message. This may lead to wrong 'show config failed' listing.'), (Recommended Action: If the error recurs frequently, it may be possible to rectify it by restarting 'nvgen_server' process. But please collect the logs mentioned n required info, before restarting the process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-0-ASIC_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Fabric encountered fatal fault and is isolating fabric plane to recover from the fault. If this fault occurs on active RSP, it would trigger chassis reload/switchover.), (Recommended Action: Fabric encountered a fatal fault and card has been reset to recover from the fault. If the fault is persistent after card reload, contact support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message in PLIM FPGA driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP hello intervals in Cisco IOS XR?
### Response:
To configure RSVP hello intervals, use the 'rsvp signalling hello interval' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp signalling hello interval 10
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-6-PLUGIN_EVENT
### Response:
(Severity: 6), (Category: L2), (Description: This is just an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_NETIO_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the bundle NetIO DLL. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user. One possible reason for the error is a low memory condition, particularly if the failure was in allocating trace buffers.), (Recommended Action: If the error message indicates the failure is low memory condition, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-PCI_ATTACH_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: The PCI attach has failed due to the above mentioned reason.), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. 'show process npu_drvr location <loc>' 2. 'show controllers npu trace all location <loc>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HYPHY_FRAMER-3-CALIBRATION_DATA_READ_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Linecard HyPhy device calibration data read failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE fast reroute (FRR) feature?
### Response:
The MPLS TE fast reroute (FRR) feature provides link and node protection for MPLS TE tunnels. It enables fast traffic recovery upon link or node failure by using pre-signaled backup tunnels that bypass the protected resource. FRR is enabled on a per-tunnel basis and activated when the primary tunnel fails.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: This is a fatal error which would stop the process from debugging. The process will restart in an attempt to clear the error.), (Recommended Action: If the error message indicates a potential out of memory condition Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-2-MEM_ALLOC_FAIL
### Response:
(Severity: 2), (Category: ROUTING), (Description: The requested operation could not be accomplished because of a low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHA-1-ALERT_FPD_UPGRADE_REQUIRED
### Response:
(Severity: 1), (Category: FABRIC), (Description: A new version of the PUNT FPGA is required for the system to be operational. Consequence is that there would be diagnostic test failures which will result in the card to be rebooted. This alarm means the FPGA is running the older image.), (Recommended Action: Please try 'admin 'upgrade hw-module location <RSP loc> fpd Cha-FPGA force'' command to upgrade fpd.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_IFH_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-TS_UNACCEPTABLE
### Response:
(Severity: 6), (Category: SECURITY), (Description: Traffic selector is not accepted by platform, this could be because of mismatched 5-tuple (ex: session_id for otnsec).), (Recommended Action: Contact the remote peer's administrator, configure acceptable traffic selectors on both peers)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-3-INIT_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when initializing PA Flow Forwarder I/O thread.), (Recommended Action: Restarting lpts_pa may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-AMBIGUOUS_IGMP_SYNC_ROUTE
### Response:
(Severity: 3), (Category: L2), (Description: If a sync route is received with ethernet tag 0, bridge port stamping is done on a best-effort basis. If exactly one bridge port is found matching this EVI and ESI, it will be used to program forwarding. Otherwise, the sync route is considered to be ambiguous and is dropped.), (Recommended Action: Review evpn and l2vpn configuration to determine where additional forwarders (bridge ports) have been configured for the same interface ethernet segment and same EVI, and remove them or configure the EVI with AC aware VLAN bundling. If a AC aware vlan bundling is used, ensure that the configuration is matching on the peer router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-ALARM_RAISED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power Sequencer failed alarm indication received from CBC. This may be a serious failure however process may continue functioning if failure was transcient.), (Recommended Action: Provide the following CLI: If issue due to MEMORY fault note down address and bus in alarm and try (admin)# show env Use the pid from canb-server output to look for matching pid in the pfm output. If the alarm indication does not clear within 30 minutes, contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-MIXED_RP_FOR_CHASSIS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This combination of RP type is not supported in this chassis type for the ASR9K family of chassis as in mixed mode they are incompatible to the chassis hardware architecture for traffic carrying purposes. Shelf manager raises this alarm when it detects the presence of the incompatible combination of RP.), (Recommended Action: Please remove one of the RP from the chassis and replace it with another RP type which is supported in the chassis according to the Cisco user documentation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-3-SR_POLICY_CANDIDATE_PATH_BSID_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: Existing SR policy candidate-path uses an explicit binding-sid that is different from the new candidate-path binding-sid. This can happen due to an operator error or due to a rogue controller trying to inject a bad candidate-path.), (Recommended Action: The user or controller is expected to resolve the warning condition by either withdrawing the new candidate-path or modifying the existing candidate-path such that both candidate-paths are using the same binding-sid.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-GEN_ERR_1
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered an Error in operation. The error string updates the reason for this error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5346_ACCESS_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5346 read/write access failure/success), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-6-LTRACE_DECODE_INIT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: During ltrace decode, the decode function retrieves file names, which must be placed into a dynamically allocated array. If the allocation calls fail this warning is printed with the specific error from the system based on the return code of the allocation call.), (Recommended Action: The call only fails due to lack of memory. Wait for a short period of time (maybe a minute or two) to see if the system resource picture improves. If The problem persists, attempt to free up memory by killing unnecessary processes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FTI-3-XML_CONFIG_ERR
### Response:
(Severity: 3), (Category: INFRA), (Description: Config application through XML failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Protocol is trying to add more than supported number of paths for a route.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_HW-2-UPDATE_ERR
### Response:
(Severity: 2), (Category: ROUTING), (Description: An error has occurred during update of MPLS entries in hardware. This may either be due to low memory or a software defect. Please collect the appropriate traces.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_V6FIB_RP-3-ERR_INFO_TBM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal software error during VPNV6 GTRIE processing by FIB on the RP. This may be a transient case.), (Recommended Action: Please collect the following info: <CmdBold>dumpcore running process <proc-name> location <node><NoCmdBold> The 'node' is the location where this IOS message was observed. The 'proc-name' is the process which generated the message. <CmdBold>show version<NoCmdBold> <CmdBold>show platform<NoCmdBold> <CmdBold>show logging<NoCmdBold> <CmdBold>admin show install active<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-READ_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Read failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_VKG-3-INACTIVE_FLOW
### Response:
(Severity: 3), (Category: ROUTING), (Description: Inactive flow has been detect. This error is normally cause by lack of traffic from the source due to errors.), (Recommended Action: If the error persists, determine the cause and take appropriate action.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-IM_BATCH_STATE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace im error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace im error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_HW-2-ERROR_WITH_LABEL
### Response:
(Severity: 2), (Category: ROUTING), (Description: There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-PROC_EXIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-3-ASYNC_SHMWIN_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The socket library has encountered an error while allocating shmwin for ASYNC sockets. This indicates that more than the supported number of applications is trying to use ASYNC sockets.), (Recommended Action: The information in required_info to be collected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TBM-7-DEBUG_TBM
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-6-LOG_INFO_DETAIL
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI general info message with two parameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-SCHED_RUNNING
### Response:
(Severity: 6), (Category: DIAG), (Description: The scheduled diagnostic test is running.), (Recommended Action: Nothing. The diagnostic test is being run as configured and the system is working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INTFINFO
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Interface Manager API im_is_hw_interface was not successful.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-6-SEND_REQUEST_FAIL
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-RN_DELINK_INODE
### Response:
(Severity: 3), (Category: MGBL), (Description: A deletion operation to an internal data structure failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_OUT_MEM_CORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast output memory correctable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-6-INFO_TRACEBACK
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: An informational message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-5-GRUB_NOTICE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Grub running on the indicated card is sending a notice message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-7-INVALID_MBIVSN
### Response:
(Severity: 7), (Category: PLATFORM), (Description: A problem was found in the MBI spec that was passed in.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_SSL-3-CERT_VERIFY_ERR_3_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: SSL certficate verify error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STP-6-LOOP_CONSISTENT
### Response:
(Severity: 6), (Category: L2), (Description: STP Loop inconsistency has been removed due to normal reception of bpdu's.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls static binding ipv4' command in IOS XR?
### Response:
The 'mpls static binding ipv4' command is used to configure static label bindings. It allows you to associate a specific label with an IPv4 prefix. Packets destined to that prefix will be forwarded using the specified label. This is useful in scenarios where dynamic label distribution is not desired or possible.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-CANT_GET_INSTALL_PATH
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not get a required installation path for file on nodes of given type, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-5-PEC_PECREMOVED
### Response:
(Severity: 5), (Category: PLATFORM), (Description: The inserted expansion card is removed.), (Recommended Action: PEC card is remove success.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-QSM_FAIL
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error while adding QSM service to RP aux port for tracing.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-4-CARD_RELOAD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: I2C Server has parked the I2C bus since the card is going down for reload. For LC, the LC will be shutdown as well.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_STATIC-3-TEDB_DELETE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to delete an SR TE descriptor block from the tedb AVL tree.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MGMT_NOT_ENOUGH_VALUES
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Management Commands Process has been supplied with less values on the command line than it was expecting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-ERR_EVM_SYNC_ATTACH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Server was unable to attach the indicated event handler to the event manager. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAAD-0-INIT_FAILURE
### Response:
(Severity: 0), (Category: MGBL), (Description: An error was encountered while initializing one of the critical modules of the aaad. Without proper initialization of this module, aaad can not operate properly. Initialization will be retried.), (Recommended Action: aaad is a critical component and must be operational in order to configure the router. If the same error is seen more than 5 times, contact Cisco TAC support because a reboot of the node may be required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_XBAR-3-WARN_STR_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Crossbar driver encountered an Warning condition in operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_HEARTBEAT_FAILURE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected interruption in the periodic 'Hello' messages.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-6-CLEAR_COUNTERS
### Response:
(Severity: 6), (Category: L2), (Description: Counters on a dwdm controller has been cleared by the user. This message is for information only.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD-3-ASSERT
### Response:
(Severity: 3), (Category: SERVICES), (Description: The process is in an inconsistent state. The process will exit and restart. All data will be resynchronised after the restart.), (Recommended Action: No action is required to recover the system, this will happen automatically. Report this issue to your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPT_SUB-1-FATAL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an severe error message in the DPT module to indicate that an error was seen during init operation.), (Recommended Action: Please collect the console log, DPT traces (show dpt trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-3-THREAD_CREATION
### Response:
(Severity: 3), (Category: MGMT), (Description: This comes when thread creation fails due to some system/infra issue), (Recommended Action: The work-around is restart calvados_login_shell process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFL-6-INFO_SWEEP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Disk usage has exceeded 90% and old log files have been removed to free up space for new log files.), (Recommended Action: No action requred.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Aggregator was unable to allocate memory. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNTIME-3-SVC_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: A service API failed and error is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_1_FIA_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error - 1 from FIA on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-CLINFO_M_PID
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to get process id from the information of a message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-2-INCONSISTENT_CONFIG_ALARM
### Response:
(Severity: 2), (Category: SYSDB), (Description: Sysdb detected a possible configuration inconsistency but was unable to clear it. Sysdb attempted to set the configuration inconsistency alarm tuple.), (Recommended Action: Execute 'clear configuration inconsistency')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_NO_RESOURCES
### Response:
(Severity: 6), (Category: L2), (Description: The BFD session can not be created or modified due to lack of resources.), (Recommended Action: - For multipath sessions verify if mulipath configured on one of the LCs. - Verify PPS availablity on the LCs Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show bfd summary<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show bfd summary<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_V6FIB_RP-3-ERR_INFO_VERBOSE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform IPv6 FIB, Error information), (Recommended Action: Please collect the console log, FIB traces (show cef ipv6 trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-5-PCERROR_RECEIVED
### Response:
(Severity: 5), (Category: OS), (Description: An PCE peer has received PCError. It is sent in several situations: when a protocol error condition is met or when the request is not compliant with the PCEP specification.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-4-RESPONSE
### Response:
(Severity: 4), (Category: INSTALL), (Description: There was a problem responding to a notification of a change to the selected version for a communication protocol. The selected version publisher will assume that the affected process handled the notification successfully.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_3_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-6-RED_POLLER
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that we miss an interrupt and backup routine, poller detects it and does the recovery action.), (Recommended Action: No action is required for this message. Software recovers automatically. Please collect 'show tech-support ethernet interfaces' for further analysis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-3-CONFIG_UNKNOWN_KEYWORD
### Response:
(Severity: 3), (Category: OS), (Description: Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.), (Recommended Action: Provide the following log: Collect Console logs and following Information -From the Shell promt of LC and RP, fetch the file /pkg/etc/inflow.conf)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO_COMMON-4-PROC_READY_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The process failed to inform System Manager that it is ready, and will be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rlogin-3-CHILD_PID
### Response:
(Severity: 3), (Category: IP), (Description: rlogin client application's child process has invalid pid), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-5-GO_BID
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Card is going to bid state.), (Recommended Action: No action required, just informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PACKET_SEND_INIT_INFO_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Passing of necessary parameters like packet size, number of packets, etc to the packet initialisation process got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the IP Flow Information Export (IPFIX) protocol in network monitoring?
### Response:
IP Flow Information Export (IPFIX) is a protocol that allows exporting IP flow information from routers and switches to a collector for analysis. It provides detailed information about network traffic, including the source and destination IP addresses, ports, protocols, and byte and packet counts.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFEA_IPV6_EA-5-DEBUG
### Response:
(Severity: 5), (Category: PLATFORM), (Description: AFEA IP-EA, Debug information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC_LIB-3-INVALID_ARG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error occured because the arguments passed where invalid.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-6-MAX_SERVER_IN_GRP
### Response:
(Severity: 6), (Category: SECURITY), (Description: Configuration Warning.), (Recommended Action: Please reconfigure based on the recommended values.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVDPMEM-3-MEMUTIL_FIND_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-3-REGISTRATION_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to register, this may be program level issue), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-OBJ_COUNT
### Response:
(Severity: 7), (Category: HA), (Description: A table's object count is not what it's supposed to be. This is an internal accounting error and does not cause any problems inside CDM, but it may cause applications which depend on this accounting info to mis-behave.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-TEST_OK
### Response:
(Severity: 6), (Category: DIAG), (Description: Diagnostic testing was completed and no errors were found on the line card.), (Recommended Action: This is an informational message indicating that Field Diagnostic testing has completed successfully. The system is working properly and no action is required based on this error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_CANNOT_SWITCHOVER
### Response:
(Severity: 5), (Category: L2), (Description: A switchover or switchback was requested by the user, but this could not be performed because the bundle is not in an appropriate state or is not configured in the required manner.), (Recommended Action: If the message indicates that the switch could not be performed because the router being switched to is already active, no action is required - the command is extraneous. If it indicates that the router being switched to is currently down, action must be taken to recover the bundle on that router before retrying the command. Otherwise, the message indicates a configuration-based issue. Correct the configuration before retrying the command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_RIBIO
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected but non-fatal error occurred when a client performed an input/output operation. See error message for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_LIB-7-NOMEM
### Response:
(Severity: 7), (Category: OS), (Description: The infrastructure library was unable to allocate memory from the system for an internal data structure.), (Recommended Action: Check to see if sufficient memory resources remain for normal operations. Add memory if necessary. Verify the installation of the infrastructure library. Re-load if required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_LOGGER-7-COPY_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is an informational message to indicate that copying a log file to the storage device indicated has failed. This could be because the device was being formatted. The process will restart to recover.), (Recommended Action: Do nothing)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SHMEM_HDR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal Error: Shared memory header corrupted.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARB-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Arbiter driver Event Manager create error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_MAC_SES_THRESHOLD_EXCEED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_ENCAP_DB-2-NH_REFCOUNT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: nh refcount goes -ve or nh is invalid), (Recommended Action: The following needs to be collected and DE team to be contacted. show encap-id platform egress-db all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-RELIABILITY_INVALID_SEQ_NUM
### Response:
(Severity: 4), (Category: L2), (Description: The sequence number received does not match the last sequence number sent. This indicates that the last PDU sent to the peer device was not received.), (Recommended Action: Check that E-LMI is configured on the peer device and that the link to the peer device is functionining correctly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRIVERS_UTIL-3-TUPLE_READ_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: An error occured when trying to read the tuple from sysdb.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-RX_UNKNOWN
### Response:
(Severity: 2), (Category: L2), (Description: The PLIM received an unknown fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-3-SATELLITE_DSC_REGISTRATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicated DSC fails to register CPM satellite device after retries. The satellite specific device me be de-scoped as DSC thread will exits.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-MACHINE_TYPE_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service cannot be activated as the machine type specified is not supported.), (Recommended Action: Enable the support for the machine type and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-UNLOAD_AP_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as old attach point data was being unloaded for new data. As a result, the old data is either still activated, or NO data is activated for this attach point. As this point is would be best to restart the policy_repository to try to clear this inconsistency.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, then please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_11_HIGH_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_11_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_TCAM_FORMAT
### Response:
(Severity: 3), (Category: FABRIC), (Description: hw-module command is used to configure the user defined tcam format, the configuration is not valid.), (Recommended Action: Need to remove the invalid hw-module profile tcam format configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-4-RATE_LIMIT_WARNING_HIGH_WATERMARK
### Response:
(Severity: 4), (Category: L2), (Description: BFD has allocated 90 percent of its packet per second allowance on this LC.), (Recommended Action: Limit the number of new BFD sessions for the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-6-KEY_INFO
### Response:
(Severity: 6), (Category: SECURITY), (Description: CEPKI crypto key info message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_VRF-3-RD_APPLY
### Response:
(Severity: 3), (Category: ROUTING), (Description: The RD value for the VRF failed to be set, leaving the internal data structures inconsistent with the configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-SHMEM_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An attempt to initialize shared memory failed. The error message describes the error, provides an error code and a string interpretation of the error code.), (Recommended Action: Please try to recover by doing the process restart of the process that generated the error. If that fails, please try to reload line card using CLI 'hw-mod loc <> reload'. If the issue persists, collect console log and the following information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces - show tech-support location <> file <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NODE_NORESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that the reset request caused by a critical alarm or heartbeat loss will not take effect because the node is being put in NMON state.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-UNKNOWN_RACK_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to get rack type, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIAAPI-3-INVALID_PARM_REDFS_ENABLE
### Response:
(Severity: 3), (Category: MEDIA), (Description: Redundancy FS got an invalid parameter value when Redundancy FS mirroring was being configured), (Recommended Action: Report this message to TAC. Capture console log, 'show media', 'show mirror statistic' and 'show mirror trace' for TAC and ddts.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-SEM_CRIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Egress Mux FPGA has encountered critical correctable error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DMAC-0-PCIE_ACCESS_ERROR_FATAL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: 'Unable to access device through PCIE'), (Recommended Action: The board would get reloaded. On reload of board, run following commands from RSP ksh to decode PCDS information - pcds_decode -c NIANTIC <.pcds file>. If users has auto reset option disabled in admin config, then the board would not get reloaded on its own. At this stage collect the output of (admin)'show tech-support control-ethernet location <nodeId> file outputFile')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-4-BACKEND_EDM_DATALIST_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: backend_edm_datalist() call failed.), (Recommended Action: Restarting the process should fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-INIT_BMAN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to Initialize the buffer manager. This error could occur for two reasons. 1. The system is low on resources. 2. A hardware error or an error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_UV-3-ABORT_ENCAP_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The FR Uberverifier process has detected a misconfiguration. It was not able to cleanup its internal DB while handling aborted encap creations. FR UberVerifier process identifies failed creates on abort and attempts best effort to correct the internal state.), (Recommended Action: The misconfiguration can be corrected by restarting fr_uv process on the specific location on which this error message is seen. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLDR-3-PARTNER_HEARTBEAT_DELAY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This node has detected a delayed ping-reply (heartbeat) to it's partner.), (Recommended Action: There is no action required. A further check will be made then a decision on whether the partner is down.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: LICENSE), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_ASIC_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while initializing the CPU control ASIC to either receive packets from the fabricq ASIC or transmit packets from the ingressq ASIC. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If problem either persists (following a process restart) then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-THREAD_MUTEX_DESTROY
### Response:
(Severity: 7), (Category: OS), (Description: A internal mutex operation has failed. This is a bug.), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: qlink driver process unable to create ltrace init files. It may be due to platform-infra failure. Not a PD problem.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACL_COMPRESSION_NOT_SUPPORTED_ON_EGRESS
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL Compression is not supported on egress direction.), (Recommended Action: Remove comression keyword or set it to 0 in the attach CLI.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3_UV-6-PROCESS_NAME
### Response:
(Severity: 6), (Category: ROUTING), (Description: The name chosen for the OSPFv3 process matches an ospf show or clear command, or a command abbreviation. This can cause ambiguities with subsequent show or clear commands for this process.), (Recommended Action: Choose a different name for the OSPFv3 process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-MRID_ADD_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NRS_LIB-7-REG_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-INFRA_VRF_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The VRF feature is configured without the necessary iVRF license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-LWA_ADD_DIR_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: A file with the same name as aaa directory detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-3-ERR_DRV_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_EVENT_MGR_CREATE
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) failed to create an internal event manager resource. It cannot operate correctly without this, so it will try to recover from the error by exiting and allowing the system manager process to handle its restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The i2c server process cannot continue due to error condition mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-MCAST
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified multicast operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TOKENNUMBER
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The token number is invalid. The command is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-INIT_ERROR
### Response:
(Severity: 7), (Category: HA), (Description: An error was encountered during intialization of the CDM library. The message should indicate the error condition. This is most likely due to a coding error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ICMP-7-SYSDB_REG_NOTIFY_FAILURE
### Response:
(Severity: 7), (Category: IP), (Description: IPv4 Management Agent encountered failure in registering notifiee with SysDB. It will recover itself by restarting. Typically this error is caused if sysdb is unavailable for an extended period.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action.If does not recover contact Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_MACSEC-7-ERR_API_PARAM
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected with one of API parameter), (Recommended Action: When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOM_STATE_UNTHROTTLE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_4_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-ARCH_NOT_SUPPORTED
### Response:
(Severity: 7), (Category: INSTALL), (Description: This function cannot be called on the current platform.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON_MON-4-TEMPERATURE_READ_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Two possibilities to this message 1) The envmon_mon process has been unable to read the temperature from various nodes for the last 5 iterations. This is most likely due to a communications error with remote nodes. Due to this, envmon_mon has no visibility into whether the chassis is being cooled properly or not. So the fans are being set to maximum speed to cover for any potential thermal issues during this time. Once the temperatures are readable, the fan speed will automatically be adjusted as per the ambient temperature. Setting fan speed to maximum to prevent chassis from heating up. 2) The envmon_mon process which has previously not been able to read the temperature from various nodes, is now able to read the temperature from atleast one node. Subsequently, the fan speed will be adjusted as per the mean_temp calculation. Setting fan speed as per ambient temperature.), (Recommended Action: Check the communication with the remote nodes. Check if 'show environment temperatures' from admin and exec mode yield any output. If not, please contact support team for further debug and assistance. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. No action is required if the envmon process is able to read telperature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMHAD-7-ERR_DLL_INIT
### Response:
(Severity: 7), (Category: OS), (Description: The Platform Manager HA Driver DLL encountered an internal software error. The debugging services could not be initialized. This problem should rarely happen. Restarting the Platform Manager HA process might recover the problem), (Recommended Action: There is no action required because the client process should handle this error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-DMA_ERROR_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a error message in the NP Driver to indicate DMA operation failed), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_14_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_14 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SATORI-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr encountered an error during initialization resulting in restarting the Procmgr process. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still non-operational, execute 'process restart procmgr location <>'. If it the process still fails to spawn, contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-MEMORY_UNAVAILABLE
### Response:
(Severity: 3), (Category: SYSDB), (Description: A SysDB server process failed to allocate certain number of bytes. This indicates process or system is running short of memory.), (Recommended Action: Check available physical memory on that node. If there is plenty physical memory, check available virtual memory for that sysdb process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IF_DRV-3-TRANSCEIVER_UNSUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An unsupported transceiver (SFP/XFP) has been inserted into the named interface.), (Recommended Action: Remove unsupported transceiver and replace with a supported transveiver. Please consult XRV9K documention for a list of supported transceivers.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_EDM-3-SYSDB_EDM_LIST_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE7_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE7_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MIRROR-3-ERR_SYSDB_GENERAL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Encountered an error using a sysdb function. The error is displayed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_CONN_EVM_HANDLER
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-7-ERR_SEND_EGRESS_IPSLA_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Internal Error), (Recommended Action: a Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_BILLING-4-PATHWARN
### Response:
(Severity: 4), (Category: SERVICES), (Description: The SBC billing cache path might require some user action to save the billing records in an SBC-instance-specific directory. SBC billing will still work properly but the billing records could either be saved in an SBC-shared directory if the SBC instance name is too long or not saved at all if there is no space left in the drive.), (Recommended Action: Make sure that the condition reported doesn't affect the billing records otherwise, correct the condition by changing the SBC instance name or by manually removing the billing files depending on the condition reported.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAM-3-ERROR_OPEN_FILE
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system could not open the file specified in the error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB-3-ERR_REMOTE_STATIC_TO_LOCAL
### Response:
(Severity: 3), (Category: L2), (Description: Local host cannot be assigned a MAC address which is configured as a static MAC address on remote router. Statically configured MAC address on remote router takes precedence. All traffic destined to MAC address will be forwarded using static MAC configuration on remote router.), (Recommended Action: Please assign different MAC address to local host or change statically configured MAC address on remote router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-INFO_GL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: This message is expected since the feature or the scale being configured is not supported. If you believe there is still some problem, please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an unexpected/invalid state while trying to process an event for a client request. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALLOCATOR-7-MEMORY
### Response:
(Severity: 7), (Category: OS), (Description: The allocator module has failed to acquire the required amount of memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: There is not enough memory available for the process to perform its functions. The complexity of the problem and recovery from it will depend on the entity for which the memory allocation failed. To name a few: 1. If it is \'DDB\' then EIGRP may not be able to activate itself on a particular VRF and recovery depends on automatic restart of itself. 2. If it is \'IPv6 AF structure\' or \'IPv6 procinfo structure\' or \'v6 interface structure\' then EIGRP may not be able to activate itself on a VRF or an interface and recovery depends on reapplying the relevant configuration when the memory usage is back to normal. 3. If it is \'Events\' then EIGRP debuggability will be degraded and there is no recovery. 4. If it is \'New route for packet receive\' then EIGRP may not be able to process its packet and there may or may not be recovery depending on the type of packet. 5. If it is \'packet structure\' or \'raw packet buffer\' then EIGRP may not be able to send its packet and recovery depends on retransmission mechanism for reliable packets.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-OPAQUE_FLAG_MISMATCH
### Response:
(Severity: 4), (Category: ROUTING), (Description: A client adding an opaque data type for which it did register to RIB.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-6-STATS_SHM_INIT_FAILED
### Response:
(Severity: 6), (Category: IP), (Description: While trying to create a shared memory object for ipv6 traffic statistics, encountered an error), (Recommended Action: Restarting ipv6_io may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_EA_INPLACE_ONGOING-3-ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS EA process encountered the specified error.), (Recommended Action: Collect the outputs of 'show qos-pal trace all location <location>' and copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-2-LOG_CRIT
### Response:
(Severity: 2), (Category: INFRA), (Description: please see show kim log for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-MANS_FPGA_ACCESS_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in read/write access of a mans fpga device register. This error could result in communication loss between MSC and Services PLIM.), (Recommended Action: Do warm reload of the Services PLIM MSC. If the issue persists do a cold reboot of the same. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-NSR_SYNC_PEER_DONE
### Response:
(Severity: 5), (Category: ROUTING), (Description: LDP Non-stop routing peer initial-sync event has completed successfully. This message appears only if the <Bold>mpls ldp log nsr<NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Generic error message used for internal debugging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OAMMIB-3-NO_IFTABLE
### Response:
(Severity: 3), (Category: L2), (Description: In the initialization of the OAM MIB DLL an error occurred while trying to create the internal interface table used for identifying interfaces running ethernet link OAM.), (Recommended Action: Since this error renders most uses of the OAM MIB impossible, the suggestion is to restart the mibd_interface process to trigger a fresh creation attempt.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SYSDB_TUPLE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Invalid sysdb tuple), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-NOLOCK_TOPOLOGY_ACCESS
### Response:
(Severity: 3), (Category: OS), (Description: An attempt to either read or modify the topology was blocked because no lock was acquired prior to the attempt, which could result in data corruption. The PCE process may now be in an inconsistent state with the rest of the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The pce_server process may be restarted in order to recover from this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_0_FIADDR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from FIA DDR on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_EA_SHOW-3-SHOW_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: INTF_EA_SHOW encountered an error), (Recommended Action: *RECUR)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-4-CFS_NATIVITY
### Response:
(Severity: 4), (Category: MGBL), (Description: Could not determine the nativity of the local CFS. If it is native, this message should be ignored; if it is non-native, then automatic cleanup is not done and user intervention is required.), (Recommended Action: If it is non-native, run 'commit replace'. If contacting support, please provide trace information from executing command 'show cfgmgr trace location <node ID>' for the node with this problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_4_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_OOR-3-OOR_STATE_RED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Total number of allocated MGIDs has reached system capacity. No more MGID allocations will be allowed until some MGIDs have been freed so that the total allocation falls below the critical threshold.), (Recommended Action: Reduce multicast route scale)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ERR_CHILD_REDIST_REQUESTS
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occured when trying to add a path to the next-hop database.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-UNLOCK_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to unlock a network entry in the BGP Table database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-NSR_SYNC_PEER_OP_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Standby LDP instance encountered an error during processing of NSR synchronization data sent by Active LDP instance.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-SECURE_MODE_ENABLED
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP secure mode enabled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-2-AIB_MSG
### Response:
(Severity: 2), (Category: L2), (Description: Error in gatm operation. The message informs about the status of registration with AIB. (SUCCESSFUL/FAIL/DISCONNECT)), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-AVOID_THERMALLY_SENSITIVE_PLIM_IN_UPPER_SLOT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Thermally Sensitive PLIMs are confined to lower slots only.), (Recommended Action: Insert the Thermally Sensitive PLIM in a lower slot 8 - 15.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What were some of the key limitations of early data networks in the 1980s?
### Response:
In the 1980s, network applications were limited to email, web, file, print and database services. Silicon technology for hardware-based packet forwarding was not fully developed. Transmission speed, CPU power and memory capacity were very limited. Routers primarily focused on efficiently using limited CPU and memory resources for packet forwarding.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-START
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP is running in the background.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-4-CPLD_POWER_WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The Fabric PLD power alert was encountered), (Recommended Action: A power alert has occurred. If the alert has occurred, node will not be shutdown. Please collect logs mentioned in required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP signaling for VPLS?
### Response:
To configure BGP signaling for VPLS, use the 'router bgp' and 'address-family l2vpn vpls' commands in global configuration mode. router bgp 65000
address-family l2vpn vpls
neighbor 10.1.1.2 activate
neighbor 10.1.1.2 send-community extended
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-INIT_ERROR_MSG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a debug error message in the SBUS Driver to indicate an initialization failure condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ICMP-7-LIB_INIT_FAILED
### Response:
(Severity: 7), (Category: IP), (Description: There was a software error during process startup.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-RECORD_TOO_SHORT
### Response:
(Severity: 3), (Category: OS), (Description: A feature record is too short. This might be because of a corrupted record or Upgrade of system.), (Recommended Action: The file should be saved to other place for later debugging, and then it should be removed to recover current situation. Please clear the OBFL files, as it might be because of corrupted records. CLI : admin clear logging onboard corrupted-files location <LOC> If the issue is seen after clearing the files, please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-5-EA_SHM_RESET
### Response:
(Severity: 5), (Category: FORWARDING), (Description: The Tunnel-IP EA needed to reset its shared memory due to a non-graceful reset scenario. The Tunnel-IP EA may have crashed due to a problem in its own process, or it may have induced a crash on itself due to a critical client error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_AUTH_FAIL_3
### Response:
(Severity: 3), (Category: IP), (Description: The authentication option received in the PBU is invalid. Hence the PBU is rejected.), (Recommended Action: Check if the auth-option configuration on the LMA for the peer MAG or the customer matched the one on the MAG. If not, correct the configuration on the MAG or the LMA to use the same auth-option configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-6-NODE_RELOAD
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Message indicating that the node has received a reload request and the node is going to reload soon.), (Recommended Action: No action is required. The message is logged for informational use.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-TRANSACTION_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: These are error related to I2C transaction. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SEG_HDR_EXT_FIFO_OFLOW_1_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress seg hdr ext fifo overflow on xaui-1 bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_NETIO-3-INVALID_DLL
### Response:
(Severity: 3), (Category: L2), (Description: Check the installation Dlls missing from package), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_THREAD_KEY_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to create a key to store thread specific values such as the name of a thread. This may be due to a low memory condition but is most likely to be an internal software programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-DLL_UNKNOWN
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to map a MIB DLL symbolic name to an address failed. This MIB will be unloaded. This could be due to a corrupted MIB configuration file, a corrupted DLL, or a MIB configuration file that is out-of-sync with its corresponding MIB DLL.), (Recommended Action: Check the MIB dll is loaded or not using CLI 'show snmp mib dll | i xxxdll' Also provide a copy of the MIB DLL and its associated MIB configuration file. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_CFGMGR_MERGE
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FAN_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Panel Fan Failure (SAT_FAN_FAIL) alarm is raised when there is a faulty fan-tray assembly.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge domain interworking?
### Response:
To configure interworking for an L2VPN bridge domain, use the 'interworking' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
interworking ip
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-NPU_NATIVE_MODE_NOT_ENABLED
### Response:
(Severity: 2), (Category: FABRIC), (Description: hw-mod profile npu native-mode-enable cmd needs to be configured, for hw-mod profile mdb config to work.), (Recommended Action: Enable npu native mode to configure hw-mod profile mdb cmd.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-VSA_TABLE_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An unexpected condition encountered.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-MAC_LIMIT_AC_SHUT
### Response:
(Severity: 4), (Category: L2), (Description: Number of MAC addresses in the attachment circuit has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the port, it has been shut down.), (Recommended Action: Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the port up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-SR_PFX_CONFLICT
### Response:
(Severity: 3), (Category: ROUTING), (Description: The same prefix cannot be configured with different SIDs (either as index or absolute) values on different routers in the network. The prefix SID will not be used until this inconsistency is resolved.), (Recommended Action: Fix the configuration such that the SID value does not conflict.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-NPU_0_SCH_0_HANG_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Scheduler 0 Hang on NPU-0 interface on bridge instance-0.), (Recommended Action: Please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSV_APP-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-4-ISSUL_THREAD_SAFETY_WARNING
### Response:
(Severity: 4), (Category: INSTALL), (Description: The ISSU Lite API is generally not thread safe and all interactions must be in the same thread as the library initialization or the client must manage the thread safety itself. This process is not known to manage the thread safety concerns itself and is flagged for investigation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GT_I2C-3-REWORK_AND_UPGRADE_REQUIRED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Detected that the board has old PLD version. Because of this, we will not be able to detect or correct an i2c bus hang.), (Recommended Action: Please upgrade PLD and check i2c rework ASAP on this board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-5-VFI_STATE_CHANGED
### Response:
(Severity: 5), (Category: L2), (Description: The state of specified VFI, under the BD with BD ID, has been changed. The possible states are: - up - down - admin down The trigger of the VFI state change are: - Shut/No Shut BD from CLI - Shut/No Shut VFI from CLI - BD operational state changed), (Recommended Action: None. To suppress this IOS message, please unconfig 'l2vpn logging vfi'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APM-6-RESET
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message notifies user when a slice reset is starting. Slice reset is requested by one of the clients that run into non-recoverable critial failure.), (Recommended Action: The message is just for information. Need to check other logs to find out which client process requested the restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-TRANSFER_ABORTED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package transfer requested on this satellite has been aborted, as requested by the user. Run 'show nv satellite status' for more information about the current state of the satellite.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-DEVCTL_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: Dumper uses devctl calls to fetch process related data.Devctl failure will impact the core file. Core file might have incomplete data.), (Recommended Action: Contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-EVENT_MGR_TFTP_TIMER_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process exited since attaching to the event manager to handle the timer expiry events.The process will respawn itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_DRV-7-SDA_HANG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: An I2C bus hang has been detected. Recovery is automatically attempted. Should the recovery be successful, a BUS_UNHANG_SUCCESS message is issued; otherwise, an UNRECOVERABLE_BUS_HANG is issued.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-INVALID_SRVR_HANDLE
### Response:
(Severity: 3), (Category: MGBL), (Description: This may be due to corruption in Event structure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-3-NONRESPONSIVE_CLIENT
### Response:
(Severity: 3), (Category: OS), (Description: RSI is forcing the specified client to reconnect, as the client has not processed a notification after a substantial timeout period.), (Recommended Action: Collect 'show processes pidin location <loc-name>' to find out the unresponsive client. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-POWER_BUDGET_CFG_AMBIGUOUS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The power budget enforcement disable and power budget enforcement strict modes are configured in the admin mode. They are mutually incompatible hence power budget will not be enforced to preserve backward compatibility.), (Recommended Action: The user has to either unconfigure one of the *power budget enforcement disable* config by typing *no power budget enforcement disable* or *power budget enforcement strict config* by typing *no power budget enforcement strict* at the admin config mode.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_LTRACE_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to initalize a ltrace buffer.), (Recommended Action: When this issue happens, it will not able to use ltrace buffer for debugging. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-GET_COID
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to obtain the connection id for an SysDB event connection. The error would normally appear during configuring sysdb event connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-2-SYSMGR_GET_NODE_STATE
### Response:
(Severity: 2), (Category: HA), (Description: sysmgr_get_node_state failed.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_STAT_PUB-7-SYSCALL
### Response:
(Severity: 7), (Category: HA), (Description: A system call failed. Error reason will be displayed on the console.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-FATAL
### Response:
(Severity: 2), (Category: LICENSE), (Description: The particular operation mentioned in the message failed due to some reason. This is a critical failure, the process cannot continue functioning as expected.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-PEER_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RSP CPU controller driver detected peer RSP parity error.), (Recommended Action: If the redundant RSP is reporting this error, force a failover with the following command in admin mode 'redundancy switchover'. If all LCs also report fabric parity error, when peer RSP parity error is reported, then check for any bent pins on the RSP for which the problem is reported. Reload the RSP that has the problem a few times. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-MGMT_IF_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-4-FROM_FGID_UPDATE_GLACIAL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'backup disable' command in IOS XR MPLS TE configuration?
### Response:
The 'backup disable' command is used under an MPLS TE tunnel interface to disable the use of that tunnel as a backup tunnel. By default, all TE tunnels are eligible to be used as backup tunnels for FRR protection. This command allows you to exclude specific tunnels from being used as backup, which can be useful for controlling the backup path selection.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-EXPORT_CONTROLLED
### Response:
(Severity: 6), (Category: LICENSE), (Description: None.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify an L2VPN pseudowire status?
### Response:
To verify the status of an L2VPN pseudowire, use the 'show l2vpn xconnect' command. show l2vpn xconnect
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-WRMEM_ABORT
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to get the startup config file name or run out of space on disk or some other transient error.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-SERVER_BAY_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: failed due to one of the following reasons: 1. Failed to create & initialize event connection data structure 2. Failed to register callback function for connection open requests and error 3. Failure occured while opening the connection), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_2_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-6-RTRID_GLOBAL_UNAVAILABLE
### Response:
(Severity: 6), (Category: IP), (Description: The global router id has become unavailable.), (Recommended Action: Ensure that a global router id has been configured and that the configured interface has a primary IPv4 address and is UP (a loopback interface is strongly recommended), or that the configured IPv4 address exists on an interface that is UP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-4-ERR_SYSDB_EVENT
### Response:
(Severity: 4), (Category: SECURITY), (Description: Sysdb subsystem sent a notification after a configuration change. This notification has an configuration change type that is not known to SSH. So, the configuration notification received has not been processed and configuration change applied.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-INCOMPATIBLE_AFI
### Response:
(Severity: 4), (Category: ROUTING), (Description: This message indicates that the user has configured both IPv4 Unicast and IPv4 Labeled-unicast or IPv6 Unicast and IPv6 Labeled-unicast address families together under the same neighbor. This particular configuration is not supported.), (Recommended Action: Configure two neighbor sessions to the router. Configure the unicast address-family under the first neighbor session and configure the labeled-unicast address-family under the second neighbor session.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-RECORD_VERSION_MISMATCH
### Response:
(Severity: 3), (Category: OS), (Description: A feature record has different version format with current software. This might be because of a corrupted record or Upgrade of system.), (Recommended Action: The file should be saved to other place for later debugging, and then it should be removed to recover current situation. Please clear the OBFL files, as it might be because of corrupted records. CLI : admin clear logging onboard corrupted-files location <LOC> If the issue is seen after clearing the files, please collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_EVENT_CONN_OPEN
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to open connection with event manager. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-GET_HW_BOARDTYPE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that getting board type from hardware has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-FILE_SEEK_FAIL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the loadpath infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be read, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified T1E1 Alarm has been set or clear.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-TIMER
### Response:
(Severity: 4), (Category: SNMP), (Description: This is internal error. This error will indicates can be Failed create snmpd mgd timer or it can be Failed to register or restart the SNMP QMON timer & DLL timer.), (Recommended Action: please restart snmpd process, if still notice the error contact technical support representative Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-EA_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-NONEIGHBOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: OSPFv3 hello, database description, or database request packet was received, but the router could not identify the sender. This is a normal occurrance if a link flap occurs on the router receiving the packet.), (Recommended Action: This situation should correct itself. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-NATIVE_VERSION
### Response:
(Severity: 7), (Category: HA), (Description: While attempting to version a checkpoint table, an application using checkpoint attempted to pass a native version that was inconsistent with the native version recorded in the checkpoint heap.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-CARD_SHUTDOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Shelf Manager component has initiated a shutdown of a line card or standby RSP.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-5-PASSWD_NOT_SYNCED
### Response:
(Severity: 5), (Category: SECURITY), (Description: The user is configured with type 8/9 secret. The type 8/9 secret are not synced to sysadmin. Only type 5/10 will be synced currently.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_WRITE_RTC
### Response:
(Severity: 7), (Category: MGBL), (Description: Writing current unix date and time to calender chip.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_SERVER-3-GN2412_CHIP_DOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The GN2412 retimer chip that amplifies the voltage to line cards in the lower half of the shelf is down. Recovery will be attempted.), (Recommended Action: The system should recover automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-OCT_TX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller FPGA reported that data it received from crossbar fabric interface had parity error), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMORB_XMLAGENT-6-PIPE_RESTART
### Response:
(Severity: 6), (Category: MGBL), (Description: The pipe process is probably restarted which is caught in TCP_Monitor), (Recommended Action: just information message, no action is required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-3-FAILED_TO_FIND_DLL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Wait for dlls to get loaded since usb pkg is loaded before infra/watchdog (wdsysmon).This error message will get printed when it unable to find the dll to register for diskspace monitoring.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-PEARL_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An LC power alarm was encountered.), (Recommended Action: Node will be shutdown immediately as hardware error occured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_EVENT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error encountered in RIP event handling mechanisms.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OC768_FRAMER_ASIC-3-CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: OC768 Framer ASIC Driver encountered a critical error which causes the process to exit.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-DB_ADD
### Response:
(Severity: 3), (Category: FORWARDING), (Description: IP tunnel MA failed to add a tunnel to one of its databse. This may result in inconsistent behavior for this tunnel. It may cause errors while modifying/deleting this tunnel.), (Recommended Action: Collect the Debugs. Restart tunnel GRE MA process by executing the following command. <CmdBold>process restart tunl_gre_ma<NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-RETRY_IN_PROGRESS
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal error to indicate resource is unavailable. Retry has taken place.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-6-EXIT
### Response:
(Severity: 6), (Category: OS), (Description: An OBFL process exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INSTALL_READY_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: 'nvgen_server got an error return from calling install_proc_ready'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-PAK_DUP
### Response:
(Severity: 3), (Category: OS), (Description: Failure in duplicating the packets, hence packet is dropped.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_MEM_ECC_FAIL_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory ECC failure on bridge instance-3.), (Recommended Action: Please reload the board using the command 'reload location <>'. Please verify the bridge FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN VFI for VPLS?
### Response:
To configure an L2VPN VFI for VPLS, use the 'vfi' command within the bridge-domain configuration mode. l2vpn
bridge group BRIDGE-GROUP-NAME
bridge-domain BRIDGE-DOMAIN-NAME
vfi VFI-NAME
vpn id 100
neighbor 10.1.1.2 encapsulation mpls
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-2-IDT_FAILED
### Response:
(Severity: 2), (Category: OS), (Description: IDT for the specified replica has totally failed and the process will do a voluntary dump to recover.), (Recommended Action: If this message is seen for a particular process on a particular node continously then contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-GET_NODE_NAME_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has failed to translate the given nodeid into a human readable string.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-PFC_MIB_INIT_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error occured while trying to initialize the pfcextmib DLL with the SNMP infrastructure. The error may result in the inability to retrieve data from the PFCEXT-MIB.), (Recommended Action: Such errors are not expected, and probably indicate an an inconsistency in the system state or loaded IF-MIB and PFCEXT-MIB DLLs. Determine if there is an initialization issue with the IF-MIB as well. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-SHM_INIT
### Response:
(Severity: 3), (Category: OS), (Description: An internal shared memory function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_LOAD_PHASE_FINISHED
### Response:
(Severity: 6), (Category: INSTALL), (Description: The load phase of an ISSU operation has finished successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_4_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-1-PCIE_TXIF_FIFO_SBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-PCIE_RESP_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PCIe response FIFO single bit error), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_IFH_CONN
### Response:
(Severity: 3), (Category: IP), (Description: The IPv6 Neighbor Discovery (ND) process (ipv6_nd) failed in an attempt to communicate with the Interface Manager (IM) process (ifmgr). This is normally a transient problem that will correct itself. However, IM is a vital partner in much router activity, including ND and IPv6 in general, so if the condition persists, check that ifmgr is running and that it isn't being blocked by some other process. Also examine any other error messages arising alongside this one.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-VERBOSE_INFO_STAT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-DRV_INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Driver initialization mentioned above failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_THRESHOLD_ASIC_RESETS_REACHED
### Response:
(Severity: 1), (Category: FABRIC), (Description: A fabric ASIC may be reset a maximum of 5 times and thereafter the fabric driver requests for the card to be reloaded. On the fifth reset, the card is reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-CORE_FILE_TOO_SMALL
### Response:
(Severity: 3), (Category: OS), (Description: Core dump file resulted in illegally small size. The core file will be truncated.), (Recommended Action: Please validate if the process exists or not. Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-3-ERR_RACK_NUM
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID BCDL Consumer encountered an error while retrieving the rack value from nodeid. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-ERROR_OUTSIDE_TRANSACTION
### Response:
(Severity: 3), (Category: INFRA), (Description: An unexpected error or restart was encountered outside a transaction. The install infra will attempt to recover automatically. Reloading will not recover from the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_0_PKT_MAXLEN_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-6-SAT_UNQUAL_OPTIC
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This alarm is generated when an unqualified optic is inserted any of the satellites ports.), (Recommended Action: Please use qualified optics.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_14_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP_POLICY-3-ORA_ORABUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-INTR_ATTACH_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-SYSDB
### Response:
(Severity: 3), (Category: ROUTING), (Description: An external OSPF error occurred when accessing the system database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_RESOURCE_FAIL_3
### Response:
(Severity: 3), (Category: IP), (Description: This indicates an internal software inconsistency.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-EXIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to notify the System Manager that it was exiting. In very rare cases, this could result in the process not being restarted when it ought to be.), (Recommended Action: If the process in not running and it ought to be (ie, there is SPAN configuration remaining), then remove all SPAN configuration, commit this change, then re-enter and commit the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_AAA_STALE_SESSION
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA failed to call AAA to disconnect a session. The session may now need to be cleared manually using the 'clear subscriber' CLI command. The most likely reason for this a low memory condition but the error could also be caused by a programming error.), (Recommended Action: Run 'clear subscriber' for the specified session.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_LIST
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-7-ERR_TCAM_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to initialize TCAM regions.), (Recommended Action: Check the status of TCAM Manger because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-UPDATE_FILTERED
### Response:
(Severity: 5), (Category: ROUTING), (Description: This message indicates that the UPDATE message contained one or more attributes that were filtered based on user configuration. One of the following actions has been taken: discard the attribute, or treat the UPDATE as withdraw.), (Recommended Action: The filtered UPDATE messages are available in 'show bgp update in filter'; they should be decoded and analyzed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-VSA_FORMAT_ERR5
### Response:
(Severity: 3), (Category: SECURITY), (Description: VSA format error in daemon user configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-TEST_NOT_ONDEMAND
### Response:
(Severity: 6), (Category: DIAG), (Description: Diagnostic test executed is not an ondemand test.), (Recommended Action: Nothing. This is an informational message and the system should be working properly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_1_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature less than or equal to the low temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the QSFP+ with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-6-AUTHOR
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: A VPDN session has been terminated due to authorization-related error), (Recommended Action: Please examine the user credential against AAA authorization database such as RADIUS profile. Also check similar authorization info at peer side such as local authentication info on LNS or RADIUS profile used by LNS)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Can multiple SMUs be installed concurrently on an IOS XR router?
### Response:
Yes, multiple SMUs can be installed concurrently on an IOS XR router using a single install operation via the command line. However, installing multiple hitless SMUs concurrently might cause a reload of a node, so it is recommended to verify such scenarios in a lab environment first.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPv4-2-SYSTEM_FAIL
### Response:
(Severity: 2), (Category: IP), (Description: There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-2-INVALID_MSG
### Response:
(Severity: 2), (Category: L2), (Description: L2FIB thread got an invalid message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_7_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_7 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-2-SPA_MAC_ERR
### Response:
(Severity: 2), (Category: L2), (Description: The internal SPA MAC got out of sync. SW needs to reset the device in order to clear the issue), (Recommended Action: If reseting the MAC device fixes the issue, nothing needs to be done. If the reset does not work, the SPA will need to be SW OIR'd. This can be easily checked by doing 'top' on the LC with the issue. If the CPU is very high, the reset did not work.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-4-RPM_UNSIGNED
### Response:
(Severity: 4), (Category: INFRA), (Description: The IOS-XR appmgr has detected that the specified rpm is unsigned, but will proceed with installation anyway.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-RX_PEER_DUP_ADDR
### Response:
(Severity: 4), (Category: ROUTING), (Description: LDP received an address advertisement for an address from a peer, but the address is already bound to a different peer.), (Recommended Action: Fix the misconfiguration in the network.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_1_XAUI_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error - 1 from XAUI on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-EOBC_CHIP_DOWN_CLEARED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Hooper chip register reading 0xff issue cleared.), (Recommended Action: 'show controllers epm-switch port-mapping location <loc in msg>*')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_TRIG_FLAG
### Response:
(Severity: 3), (Category: OS), (Description: APS TRIG FLAG UPDATE. It is applicable for HYPHY, Digi 20x10g and 2x100g Digi cpak cards.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_COM_IFIB-3-PIF_FREE_COUNT_ERR
### Response:
(Severity: 3), (Category: OS), (Description: No more free pif are available. It's likely that the system is running low in memory.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-5-SATELLITE_VERSION_MISMATCH
### Response:
(Severity: 5), (Category: L2), (Description: There is a software version mismatch between the Satellite and the Host which has not been reconciled correctly.), (Recommended Action: CFM should continue to operate normally, but any affected Satellites will be treated as if they have default capabilities.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-PCL_PKT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Sponge encountered a PCL Packet error. This error could be due to unicast lost packet.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-6-STATUS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: It indicates the status of FPD upgrade like start, in-progress, end.), (Recommended Action: This is to inform user to notify the status of upgrade procedure. No action needed from user side No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_Manager-6-UPGRADE_RESULT
### Response:
(Severity: 6), (Category: INFRA), (Description: Update FPD upgrade Status), (Recommended Action: The reason for failed FPD upgrade to be analyzed. Please contact Cisco Technical)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_VPN_MIB-3-ERR_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Initialization failed), (Recommended Action: Enable 'debug mpls vpn init' and restart the process mpls_vpn_mib.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERR_INFO_SHOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, show fail error information), (Recommended Action: This is a warning that some information is missing from the output of the show command.PLease collect the show command, console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>). Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-1-MSG_PAR_CRC
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Fabric arbiter detected RX Msg Parity/CRC error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-3-PRM_ASYNC_REQ_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to enqueue PRM async request. Automatic retry is under way. With a large scale configuration using MSTP/MSTAG/.8032, the error may become persistent. In that case, line card reload may be needed to recover from error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-EVM_TM_ATTACH
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to allocate a managed timer identifier and assign to it an event handler.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_UCORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory uncorrectable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_IIR_OP
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred processing the IIR event and the bundle EA process was unable to report this error back to IIR. This may lead to some inconsistency with the bundle membership in the data plane not matching what is intended according to the control plane.), (Recommended Action: The failure to report the error back to IIR suggests a problem in the connection to IIR. This may have been a transient problem, but restarting ifmgr and/or the bundlemgr_ea process on the location of the error might be necessary. The error that should have been reported also needs to be dealt with. This error may have come from some lower layer platform component, possibly a resource allocation error. If the error code provides some information as to the failure then take action appropriate to the error. If the error code is not specific then take action according to whether the event was a link activation or a link deactivation/deletion. For activation problems unconfigure and reconfigure the member link - if this fails try restarting the bundlemgr_ea process after unconfiguring the member link. For deactivation/deletion failures try restarting the improxy process to trigger a complete resync by the bundlemgr EA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
Are SMUs always hitless or can they cause a router reload?
### Response:
Some SMUs are hitless, meaning they can be installed without impacting traffic or requiring a router reload. However, other SMUs may cause a line card or full router reload, depending on the nature of the fix. Cisco documentation should be consulted to understand the impact of a specific SMU before applying it to a production network.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-BGP_PIC_UNSUPPORTED_CONFIG_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the Platform FIB to indicate that platform layer identified an unsupported configuration or condition. Auto Workaround: Disabled BGP-PIC for this path), (Recommended Action: Please validate the feature configuration. This scenario can occur during transient network events, if not with explicit configuration or unsupported configuration. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-CLK_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a clock failure on some bus/port), (Recommended Action: Please check the source of the external syncE clock. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-6-SCHED_COMPLETE
### Response:
(Severity: 6), (Category: DIAG), (Description: The scheduled Diagnostic test is complete.), (Recommended Action: Check the results and proceed accordingly. This is an information message only to indicate that Diagnostic testing is complete. The router is working properly and no action is needed based on this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XR_DIAG-3-FABRIC_PING_FAILURE
### Response:
(Severity: 3), (Category: DIAG), (Description: The diagnostic test for combined fabric unicast and mulitcast ping has detected an error condition and if the reload/shutdown is configured for the test diagnostic software will take corresonding action such as reload/shutdown on single node consecutive failure.), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-PARAMETER_MISSING_BLOBBIFIER
### Response:
(Severity: 7), (Category: INSTALL), (Description: An invalid parameter has been unexpectedly passed to the Install infrastructure. This is a coding error. The current request or operation will not be completed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_ATTACH_SOCK
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-4-WARNING
### Response:
(Severity: 4), (Category: SECURITY), (Description: ACE driver warning message.), (Recommended Action: 'If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_OTN_LOF
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIP-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-ERR_EVC_DESTROY
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: During process termination PPPoE MA failed to destroy a connection to a service provided by another process. This is an internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SSP_INTR_SP0_RX_EOP_ERR_P_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SSP_INTR_SP0_RX_EOP_ERR_P interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-4-ERR_ASIC_MBE
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabricq Asic encountered a memory uncorrectable error The multi-bit errors can happen in one of many blocks of the fabricq ASIC. One of them is the Fabric Interface (FI). If these error messages are generated for short intervals for FI links when a fabric card is disabled / reloaded / OIR'ed, then they are harmless.), (Recommended Action: If these messages continue for more than 2 minutes, with incrementing uncorrectable error (UCE) counters, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-2-PARSE_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: An error occured parsing show output data), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: Malloc or calloc returned a null pointer. This indicates an out of memory condition. The rt_check process will exit or return.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-SHM_MAP_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Shmwin server failed to map shmwin share memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx - show shmwin summary location 0/x/CPUx - show shmwin all list all location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-LNS_MAX_IP
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This message is for LAC limitation. When number of LNS IP Addresses (Tunnel-Server-Endpoint) configured exceeds maximum, we get this message.), (Recommended Action: Please remove few LNS IP Addresses(Tunnel-Server-Endpoint) from user profile.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> show cef platform services trace common all reverse loc <ISM> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-7-GRUB_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Grub running on the indicated card is sending a debug message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-BAG_REGISTER
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to bag_register_all_outgoing_conn_bag() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_INSUFFICIENT
### Response:
(Severity: 2), (Category: LICENSE), (Description: Number of upgrade license(s) used is more than available. Software upgrades will be blocked once the upgrade grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: The customer should deposit the required upgrade licenses in the virtual account.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-0-VM_RELOAD_DURING_NBN
### Response:
(Severity: 0), (Category: INFRA), (Description: VM reload happend while ISSU operation was ongoing. System is in inconsistent state, because of this. It is recommended to reload router, before doing any operation.), (Recommended Action: The reason for this vm reload needs to be analysed. Collect the show tech logs by running 'show tech-support ctrace' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure. Reload the router to recover it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the default behavior of the running configuration in IOS XR?
### Response:
By default, the running configuration in IOS XR is not saved automatically. Changes made to the running configuration are lost on a reload unless explicitly saved to a file using the 'save configuration' command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-ZONE_POWER_RESTORED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that zone is now receiving power.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN Inter-AS feature?
### Response:
The MPLS VPN Inter-AS feature allows MPLS VPN services to span multiple autonomous systems. It enables VPN connectivity between sites attached to separate autonomous systems. There are different options for implementing Inter-AS MPLS VPN, with varying levels of scalability, isolation, and complexity.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_UCORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory uncorrectable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_SOCK-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: L2), (Description: Not enough memory was available for the operation to complete.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-4-CONFIG_SCRIPT_PENDING_MODIFICATIONS
### Response:
(Severity: 4), (Category: MGBL), (Description: One or more configured config scripts were run and attempted to make modifications to the running configuration at a time when modifications could not be made. This may occur as a result of updating a script configured with no checksum.), (Recommended Action: The pending modifications may be applied to the running configuration by performing a commit. The outcome of this may be checked prior to performing a commit by using <CmdBold>validate commit apply-policy-modifications<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-6-THRESHOLD
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_6
### Response:
(Severity: 3), (Category: IP), (Description: The Re-registration PBU should not contain All-Zero HNP option.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-ERR_INFO_PWHE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error information), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-4-ERR_ADJ_BDL_DB
### Response:
(Severity: 4), (Category: L2), (Description: An unrecoverable error has occurred during processing of the bundle. This can only occur during the creation of the bundle. The bundle will need to be removed from the configuration and re-added), (Recommended Action: Remove the bundle from the configuration, and re-add it)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-6-PORT_USAGE_THRESH_EXCEEDED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Ports consumed have exceeded 90% threshold for this particular IP. Details will be given in the meesage displayed), (Recommended Action: Reduce number of sessions for this particular user.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-PON_RESET_PERFORMED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This is an error message in the NP Driver to indicate that it is performing a PON reset to recover from the specified error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-4-IM_SIGEVENT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: CLNS failed to establish signal event in the Interface Manager control plane. It's an internal error.), (Recommended Action: Please contact cisco-support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-REG_ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: iq manager encountered an error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSHD-3-ERR_USAGE
### Response:
(Severity: 3), (Category: IP), (Description: Usage error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_PKT_LEN_ERR_FIA01
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error FIA 01 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-SOFTWARE_PARAM_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FPD process failed to upgrade Field-Programmable Devices due to internal software error. LC works with compatible IOS image and compatible fpd image. If the IOS image is incompatible with the existing fpd image then all interfaces will be down.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the valid values for the BGP origin attribute?
### Response:
The origin attribute indicates how BGP learned about a particular route. The valid values are\n- IGP (i) - Route originated from BGP network statement\n- EGP (e) - Route originated from EGP\n- Incomplete (?) - Route originated from redistribution\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-INTF_NOT_FOUND
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: All interfaces in XR_CHECKSUM_OFFLOAD_COUNTERACT list must also be in XR_INTERFACES list.), (Recommended Action: Check for typos in XR_CHECKSUM_OFFLOAD_COUNTERACT.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-TOKENTYPE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The token type is invalid. The calling function, token number and token type is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-6-DEBUG_INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message. No user action is required.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSC-7-ERR_GSP_LOOKUP
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric statistics client library encountered failure when it looks up Fabric server light weight group for light weight group communication. Normally, this is a transient error. It can be a true error if the error is persistent.), (Recommended Action: Restart Fabric statistics client manually if the error is persistent in a specific fabric card. Restart Fabric statistics server manually if the error is persistent in many fabric cards.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCID_SERVER-6-EVENT_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: The MCID process encountered the specified noteworthy event), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-7-ERR_RCC_INIT
### Response:
(Severity: 7), (Category: ROUTING), (Description: MPLS LSD failed to initialize RCC library for the reason displayed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CARD_POWERUP_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has failed to power up the specified node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-7-ERR_SYSDB_EDM_OPEN
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FIA driver to failed open the SysDB EDM connection by binding to it and registering using the event connection manager. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-TESTPOINT_LIMIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Failure in adding a new testpoint callback function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_16P_OC48-6-OIM_OIR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Optic Interface Module (OIM) for the specified port has either been inserted or removed.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-4-MPA_EJECTOR_OPEN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Warning message to user to close MPA ejector screws to avoid MPA shutdown), (Recommended Action: Close both MPA Ejector screws within 10 seconds)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-CERR_REG_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: This system was unable to register the CERR DLL. This is probably due to a faulty installation.), (Recommended Action: Be sure the libisis_error.dll is properly installed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_EXEC-3-BIND_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Unable to bind to server and the CLI will exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASIC_SCAN_SERVER-3-I2C_INIT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Failed to initialize I2c. This may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-TASKID_LIMIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'A command can have only MAX_TASKIDS_PER_COMMAND different taskids'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-1-FPD_CORRUPTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Each Cisco FPGA has 2 images stored on board: 1. a software upgradable image, referred to as 'the upgrade image'; 2. a fallback image for use when the FPGA failed to boot up with the upgrade image , referred as 'the golden image'. This alarm means the FPGA is running the golden image, likely due to the upgrade image is corrupted.), (Recommended Action: Please try 'admin upgrade hw-module fpd fpga6 force loc <>' command to recover the upgrade image. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-2-GN2412_FAULT_FATAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The GN2412 device, used for communication to lower chassis LCs, is down), (Recommended Action: The board will be reloaded. Switchover would occur if standby RP2 is NSR ready. At this stage collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_10_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-6-NCS1K_NEED_UPGRADE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates a new firmware is available, user need to re-provison slice.), (Recommended Action: user at convinience can run 'upgrade hw-module slice <> re-provision', to make new firmware activated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-CALL_TLV
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: Messages are exchanged between the VPDN Manager (vpdn_mgr) process and the client (e.g. ppp_ma). An error has occured here and session state may be out of sync.), (Recommended Action: Allow VPDN to recover and the session to re-establish. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-DISCONN_ATTACH
### Response:
(Severity: 3), (Category: OS), (Description: QNET process tried to attach a disconnect handler for the process but encountered error. The QNET process may not exit or restart properly.), (Recommended Action: Do not restart qnet if the router is working properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-3-ERR_INTERNAL_SW
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Allocator encountered the annunciated internal SW error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'l2vpn bridge group' command in IOS XR?
### Response:
The 'l2vpn bridge group' command is used to configure a point-to-multipoint Layer 2 VPN (L2VPN) service, also known as Virtual Private LAN Service (VPLS). It creates a virtual bridge domain that connects multiple sites as if they were on the same LAN. The 'bridge group' command defines the VPLS instance and its associated parameters.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-ASIC_INFO
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-4-DATAPLANE_ADD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: Failed to program session dataplane in L2FIB.), (Recommended Action: Allow the subscriber to reconnect. If the problem persists, contact technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGMP_MTRACE-3-MEMORY_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Memory error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information as given in the required info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UCP_OUNI-6-CONNECTION_ESTABLISHED
### Response:
(Severity: 6), (Category: ROUTING), (Description: A connection was established.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the attached-bit receive ignore command in IS-IS?
### Response:
The attached-bit receive ignore command is used to configure a router to ignore the 'attached' bit in received Level 1 LSPs. The attached bit indicates that the sending router is connected to the Level 2 backbone. In some cases, such as when there are multiple Level 1-2 routers in an area, ignoring the attached bit can prevent suboptimal routing by avoiding the use of a default route to the nearest Level 1-2 router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-3-EVM_EVENT_BLOCK_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The rpl multi-version coordinator saw an error in the primary event loop. The coordinator may still be functioning and route policy may not be operational until this is resolved.), (Recommended Action: This error message may be transient. Restart policy_repository and try the use case again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LETHER-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during initialization with a necessary service for the process. The process is unable to run.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_KM_OOR-3-TCAM_OOR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A linecard has only limited number of TCAM resources available. TCAM Out of Resource (OOR) error was returned while programming the HW.), (Recommended Action: Reduce the scale for PBR/BGP Flowspec or reduce the scale of other TCAM based features like QOS, ACL, IFIB etc.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-4-WARN_RSYNC
### Response:
(Severity: 4), (Category: MGBL), (Description: See the man page of rsync for further detail on these errors. Some of these may be fixable/transient, and others might point to a deeper issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICEMGR-3-GET_VOLTAGE_APPLY_FAILURE
### Response:
(Severity: 3), (Category: LIBRARY), (Description: Slicemgr failed to get apply voltage for that stage/), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-SNMP_SYNC_FAIL
### Response:
(Severity: 3), (Category: MGBL), (Description: If the source device boots from a non-default disk disk0 check rommon variable BOOT_DEV_SEQ_OPER on the destination node correct the setting if necessary and retry migration If the problem persists refer to upgrade MOP for more information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-RACK_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_primary_server process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show cctl_primary_server location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-SYS_RELOAD_FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: Specified install operation in the error message failed.), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Collect the install operation logs by running 'show tech-support install' on admin as well. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPSEC-2-PARSE_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: An error occured parsing show output data), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-2-RX_LF
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The PLIM received a Local Fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Correct the far end or fiber to this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT_SHOW-7-TRACE_INSERT
### Response:
(Severity: 7), (Category: OS), (Description: The show decode helper library isolates string and trace data to a given trace name and node. The attempt to insert this into the lookup tree failed for the above reason. Any trace using this string may not be printable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-4-RCC_INIT_INCOMPLETE
### Response:
(Severity: 4), (Category: FABRIC), (Description: Fabric drivers health is contingent of the RCC library's initialization. Driver will poll to verify the status of the RCC hw init.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_SBE_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 channel FIFO single bit error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-ROLE_LOCKED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The role of this card has been locked - failover was prevented.), (Recommended Action: A failover was initiated, but could not complete because the card role is locked.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-4-WARNING
### Response:
(Severity: 4), (Category: OS), (Description: Warning conditions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-IPV46_COMPRESSION_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'After compression, ipv4 address in ipv6 address should have been converted into' ' two 16 hexs , but this did not happen.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POLICY_REPOSITORY_DYNREG-3-AP_DOCK_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error was encountered as new attach point data was being docked. As a result, the new data has not been activated for this attach point. At this point is would be best to restart the policy_repository to try to clear this inconsistency.), (Recommended Action: Restart the policy_repository process and check for re-occurence of issue If problem persists, the please contact support team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_NSR-3-HFR_SPP_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HFR spp client creation failed. %s-Function name %d-Return Value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_ASYNC_ATTACH
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install health-check command in IOS XR?
### Response:
The 'install health-check' command performs a set of system health checks before proceeding with an installation operation. It verifies that there is enough disk space, memory, and that the configuration is consistent across nodes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-3-POWER_REQ_INVALID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The shelfmgr power requirement for the given card type is incorrect), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-v6_DATA_MDT_INVALID_GRANGE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal Error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-PSOC_UPGRADE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message indicating that PSOC firmware upgrade is failed on the specified location.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-PLIM_SENSOR_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The PLIM sensor initialztion is exit due to the specified reason), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-DLL_AUTOLOAD_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: An error occurred while auto-loading a caps DLL. If this message is repeatedly seen then the software packet path on this node may be broken.), (Recommended Action: The process will reconnect to Interface Manager and try again. If this message is not seen again then the issue has been recovered and no further action is required. If this message continues to be seen Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-6-ASIC_DISCOVERY_IS_PENDING
### Response:
(Severity: 6), (Category: FABRIC), (Description: 1. Driver periodically (every 30 secs) checks for the FIA devices to be discovered. When devices are not discovered this message is logged. If there is a delay in powering up the devices, a couple of messages may be expected.), (Recommended Action: If the messages are logged continuously, then either the devices are not powered UP and seen on the PCIe bus or the driver is not aware of the ASICs coming UP. Need to reload the board for recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-3-INDEX_MISMATCH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error indicates the mismatch between the egress and ingress interface.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-BAD_ALIGNMENT
### Response:
(Severity: 7), (Category: HA), (Description: A heap index was not word aligned.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-CALL_DLL_ENABLE
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: When 'vpdn' configuration is first added, the VPDN CALL infra initializes in client processes, namely PPP-MA. Something has failed in this process and may prevent VPDN from functioning.), (Recommended Action: Remove and re-add 'vpdn' configuration. If the problem repeats, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_FPD-3-FATAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An internal system software error has occurred. This type of errors are in general SW bugs that are caused by providing wrong information to SPA FPD API.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_RDB
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error encountered in RIP's routing database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-4-SYSMGR_INFORM
### Response:
(Severity: 4), (Category: SNMP), (Description: Failed to inform SysMgr on end of initialization of UDP transport module for SNMP. This could be due to a block in snmpd initialization. If snmpd process does not come to normal execution even after some time need to take the recommended action.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Take the 'show processes blocked' and 'run attach_process -p <snmpd-pid>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-RX_ALARM_LOS_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For T1 mode LOS is declared (as detected by BITS receiver) when no pulses are detected in a window of 192 consecutive pulse intervals. In E1 and 2048kHz modes LOS is declared when no pulses are detected in a window of 255 consecutive pulse intervals. For UTI mode, LOS is detected by hardware as per J.211 specifications.), (Recommended Action: 1) Ensure cable connection between the configured interface port and external equipment. 2) Check the cable integrity and cable connectors. The receive pair should be on pins 1,2 on the RJ-45 jack.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, INIT error), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all all loc <>), 'show install active', 'show logging console', 'show platform' and 'show version'. Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-6-GO_ACTIVE
### Response:
(Severity: 6), (Category: HA), (Description: The card is going active.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-BREAKOUT_ACCEPTED_BY_DEFAULT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Card Type is not set if it is not yet Up, hence Breakout command is accepted by default. If cardtype mismatches after it comes UP, please manually reconfigure the command.), (Recommended Action: If cardtype mismatches after card comes up, please manually reconfigure the command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-POWER_MODULE_REDUNDANCY_LOST
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates rack power is now being allotted from all power modules. Power module redundancy is no longer available, a single power module failure might result in card power loss.), (Recommended Action: Please check the 'show power' command to resolve this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-7-TLV_INIT
### Response:
(Severity: 7), (Category: OS), (Description: PlaceD was unable to initialize the tlv library for ISSU support), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-ERROR4
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate some problem with the code. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2RIB_DEBUG-3-ERR
### Response:
(Severity: 3), (Category: L2), (Description: Debug and ltrace library initialization failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-ERR_MALFORMED_ORF
### Response:
(Severity: 4), (Category: ROUTING), (Description: The ORF entry is encoded wrongly), (Recommended Action: To be followed)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-ERR_FILE_OPEN
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while opening the file), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZENJF-4-FMEA_FLAG_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The FMEA debug flag on Satori RP KJF FPGA scatchpad is set. The system will not conform to functional specification if the jumper is set. This is used for debug purpose only. It should not be set on a production system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SE_P2MP_SRVR-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A critical error occured during the initialization of SE P2MP_SRVR process which involves exiting the process. The SE P2MP_SRVR will restart and unless the same error occurs on the next attempt the SE P2MP_SRVR will function normally. If the error is persistent, it indicates the system error or HW error which needs further investigation. The cause of the error will be mentioned in the message displayed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RGMGR-3-ERR_RIB_BATCH_BUFFER
### Response:
(Severity: 3), (Category: INFRA), (Description: Redundancy Group Manager encountered an unexpected error while defining a batch of updates to be sent to the RIB. This is an internal programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-NTA_RESET_INFO
### Response:
(Severity: 3), (Category: OS), (Description: An unexpected error occurred.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-TRANSCEIVER_REMOVED
### Response:
(Severity: 2), (Category: L2), (Description: The optic interface module was removed on the given interface which will result in a link down. The traffic may start getting dropped after this error message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-WHITEBOX_LOOPBACK_DETECTED
### Response:
(Severity: 3), (Category: INFRA), (Description: A loopback connection from an expansion port to another expansion port on the same switch has been detected.), (Recommended Action: Determine if the event was due to a fault. If so, the root cause need wiring/connectivity check.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DRP_PAIRING-3-CHKPT_APPL_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Check pointing of drp_pairing application initialisation got failed. Software will automatically do recovery by restarting the drp_pairing process.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-5-AUTH_KEY_LENGTH
### Response:
(Severity: 5), (Category: ROUTING), (Description: For this authentication algorithm the key-string configured in the key chain must have exactly the length specified in this message. Longer or shorter strings will cause authentication to fail.), (Recommended Action: Correct the key chain configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKIO-4-INVALID_INST
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: XRd currently only supports the CPU0 instance for MgmtEther interfaces and instance 0 for GigabitEthernet interfaces.), (Recommended Action: Check the instance numbers in the XR_INTERFACES environment variable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-INV_CONN_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: Indicates that the ESD will be able to raise alarms which will not reflect on the led status.), (Recommended Action: Try restaring the ESD process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_HFR-7-ERR_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an unexpected/invalid state while trying to process an event for a client request. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-IMG_LAUNCH_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in launching Linux/Application image. Cause of the error will be mentioned in the message displayed. This error prevents Services PLIM from coming up to its full functional Active state.), (Recommended Action: Do cold reboot of Services PLIM MSC If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PA_FF-4-MSG_ATTACH_SYNC
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when attaching a handler for an Event Manager synchronous event.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-3-EPM_SWITCH_FAULT_NORELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: router's internal communication device EPM switch is down), (Recommended Action: The board is not reloaded. At this stage please collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_MAX_ENTRIES_LIMIT_REACHED
### Response:
(Severity: 4), (Category: IP), (Description: ARP has been loaded with default/configured entries limit.ARP process may be in the risk of its peak performance.), (Recommended Action: Increase the configured value <CmdBold>arp max-entries<noCmdBold> to higher value if the current limit set is less and is safe to increase based on the CPU/memory utilization from the ARP processess in all the nodes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_ITERATE
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_iterate_* failed while iterating through the chkpt list.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_FPGA-3-CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: PLIM FPGA ASIC Driver encountered a critical error as described in the error message. This error causes PLIM OC768 process to exit.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIB_VMAN-3-VIRT_INST_DISK
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service requires Disk Storage in excess of the Free Disk Storage available to virtual services.), (Recommended Action: Enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_4_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_4 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_LWM_DISCONNECT
### Response:
(Severity: 7), (Category: HA), (Description: The msg_chan_disconnect function reported an error trying to disconnect from the specified Embedded Event Manager server channel.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-CHKPT_ATTR_SAVE
### Response:
(Severity: 3), (Category: OS), (Description: chkpt_save failed while updating an object in a particular table.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-TIMESTAMP_MISMATCH
### Response:
(Severity: 3), (Category: IP), (Description: The difference between the timestamp received in the PBU and the timestamp on the LMA is more than the replay timestamp window size.), (Recommended Action: Manually synchronize clocks or configure NTP on the MAG and the LMA. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-SNAPSHOT_DELETE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: As part of cleanup of an install transaction, the install infrastructure was unable to cleanup the backup file system copy. This means that this node will not run the correct software. In order to recover, the install infrastructure will request a reload, and re-image, of the impacted node.), (Recommended Action: The relevant node should recover once it has completed its reload. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZENJF-4-BACKUP_ROMMON
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The system is booted from backup Rommon spi flash on Kensh-JF board.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-3-SUPP_UDP_ONLY_AFMON
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: AFmon policy only allows matching on UDP flows. Other types of match rules will be ignored i.e. they will not be programmed in hardware.), (Recommended Action: No further action is required if the policy programming behavior, which is explained here, is acceptable. Otherwise the policy can be removed and an acceptable one re-applied. 'no service-policy <policy-name> input|output')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SI-3-INTERNAL
### Response:
(Severity: 3), (Category: SERVICES), (Description: Invalid argument (mostly NULL) was passed to SI API.), (Recommended Action: si_ma process may need to be restarted. Please collect the error log, show logging output and show tech-support si.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTCTRL-2-THERM_ALARM_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Interrupt controller driver detected a thermal error.), (Recommended Action: Ensure the fans are working and the board is not overheated. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-4-CERR_REGISTER
### Response:
(Severity: 4), (Category: SECURITY), (Description: locald failed to register error codes.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPI-3-PKT_OVERFLOW
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Packet Infrastructure (EPI) library has been asked to create a packet for an interface which already has the maximum number of supported packets in storage. EPI has created the packet, but may have difficulty updating packets on this interface in future.), (Recommended Action: This message is likely to indicate an internal error in the process that means it is not freeing its old packet information correctly. If the process is not restarted then a future configuration change for the interface in question may not be reflected in the generated packets. Try restarting the process and, if the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-6-SESSION
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: A VPDN session has been terminated due to session-specific errors encountered in local or remote VPDN or L2TP protocol processing), (Recommended Action: Please examine the human-readable error message that appears in the log and conduct the first level of troubleshooting based on the info in the message. If the root cause is still not clear, collect the required info and forward it to technical support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPPHA-3-FAULTCRASH
### Response:
(Severity: 3), (Category: L2), (Description: A CPP HA has detected unresolved fault.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-2-INIT_FATAL
### Response:
(Severity: 2), (Category: INFRA), (Description: A fatal error occurred during KIM's initialization.), (Recommended Action: Restart the kim process. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_XRV9K_NETIO_LIB-4-GET_MYNODEID_FAIL
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Unable to determine my node ID using platform API.), (Recommended Action: Please capture show proc output and show logging output - 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAOC768-3-CRITICAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: PLAOC768 Driver encountered an critical error condition which involves exiting the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BQS_LIB-3-MUTEX_INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to create the mutex.), (Recommended Action: Restart the process to recover from the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-BLC_UPDATE
### Response:
(Severity: 4), (Category: OS), (Description: Bundle (vlan) interface update to local bundle (vlan) database failed), (Recommended Action: Restarting pifibm_server_lc may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-3-STANDBY_RP_NOT_REPORTING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Standby RP has stopped reporting as standby RP countdown reached zero.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPMCE-6-HOURLY_COUNTS
### Response:
(Severity: 6), (Category: PLATFORM), (Description: If SBE errors are detected, the IOS message prints the number of SBEs seen in the last hour.), (Recommended Action: Contact support if this message is seen more than once a day.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA_LTRACE-3-INIT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An unexpected initialization error has occurred during initialization of ICPE Traces. The platform software should automatically recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-3-DEBUG_SERVICES
### Response:
(Severity: 3), (Category: OS), (Description: A call to a debug services interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-SPA_SERVER_EVENT_CONN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_XAUI_RDY_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI not ready on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_SIS-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Service Interface Server encountered an provisioning warning.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-MIB_LWM_MSG_SEND_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: 'Could not send message to pki mib channel. Snmp traps will not be sent'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TP_SW-3-OPENROAM_ADAPTOR_INSTALL_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Openroadm adaptor installation failed for ORA), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you monitor memory usage in Cisco IOS XR?
### Response:
Memory usage in Cisco IOS XR can be monitored using the 'show memory' command. It displays information about memory utilization, including total memory, free memory, and memory usage by individual processes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-LWM_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to execute to retrieve incoming LWM message for the reason shown in the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx - show shmwin trace all location 0/x/CPUx - show process block location 0/x/CPUx - dumpcore running shmwin_svr location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_LCP-4-MULTILINK_PROVISION_NOT_IP_IW
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error when receiving a notification from l2vpn_mgr. Multilink interfaces are only expected to be provisioned when IP interworking is configured. The most likely reason for this is a problem with the l2vpn service and is likely to be a transient issue.), (Recommended Action: The error is likely to be harmles, if problems are encountered, consider reconfiguring the interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ldp discovery transport-address' command in IOS XR?
### Response:
The 'mpls ldp discovery transport-address' command is used to specify the transport address to be used for LDP discovery messages. By default, LDP uses the router ID as the transport address. This command allows you to use a different address, such as a loopback interface address, which provides greater flexibility and stability.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the BGP dynamic neighbors feature?
### Response:
The BGP dynamic neighbors feature allows peerings to be automatically established based on a listen range rather than being explicitly configured. Incoming connections from peers within the range are accepted and dynamic neighbor entries created. It is configured with the bgp listen range command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-6-MTU_NEAR_HW_LIMIT
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The MTU on the interface, including any sub-interface overheads, is larger than the H/W MTU limit. Hence large frames bigger than the maximum frame size supported on the interface may be dropped.), (Recommended Action: If 802.1Q or QinQ support is required on the interface, then it is recommended that either the configured interface MTU is reduced by 4 or 8 bytes, or the sub-interface MTU is reduced by 4 or 8 bytes to ensure that all frames are within the H/W limits.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-PEC_OKAY
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Power Okay for the inserted expansion card. PEC is UP and OPERATIONAL.), (Recommended Action: Power-on of the PEC successful! Further, config may be done successfully on the PEC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cpp_sbs-3-BLOCK_SERVC_FAILR
### Response:
(Severity: 3), (Category: L2), (Description: The process is exiting due to a failure in CPP Infra Stats Block Service.), (Recommended Action: *SH_CMD show controllers pse qfp infrastructure exmem statistics location < > * *SH_CMD show controllers pse qfp 0 infrastructure memory ppe-address location < > * *SH_CMD show controllers pse qfp 0 statistics summary location < > * *SH_CMD show controllers pse qfp 1 statistics summary location < > * *SH_CMD show controllers pse qfp infrastructure exmem statistics location < > *)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SEM
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DATABASE-4-INIT_ERROR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: An error was encountered while initializing one of the modules of configuration manager server. The failure of this module initialization is not critical to configuration manager to be completely operational.), (Recommended Action: Provide the message details to Cisco Support personal.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBCSVI_EA-3-INTERNAL
### Response:
(Severity: 3), (Category: SERVICES), (Description: An unexpected internal error has occurred in the SBCSVI EA process. The process will restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-VRF_UPDATE
### Response:
(Severity: 4), (Category: OS), (Description: VRF update to attached VRFs database on LC failed), (Recommended Action: Restarting pifibm_server_lc may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-TIMEOUT_RINFO
### Response:
(Severity: 7), (Category: SYSDB), (Description: A request timed out before SysDB MC received the expected number of replies), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_INSTALLMGR
### Response:
(Severity: 3), (Category: OS), (Description: A call to an install manager function failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB-3-STATE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_INOTIFY_MAX_WD
### Response:
(Severity: 3), (Category: MGBL), (Description: See Linux 'man inotify_add_watch'. Each directory (recursive) that is being synced requires one watch descriptor.), (Recommended Action: Either remove directories, flatten the synced directory structure, or increase the ulimit for max number of inotify watches. If you believe you reached this state in error (e.g. you don't have 8k directories under your mirrored directores), then run 'process restart mirror_server'. If this recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-ERROR_EXIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The CAN Bus Server process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Verify process is up and running, give CLI: If it is still non-operational, use CLI: If it is still non-operational, perform card reload. If still non-operational, contacting TAC and performing RSP switchover is recommended.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMITH-3-WESSEN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates HW read/write timeout. The software will retry the action to recover.), (Recommended Action: If the issue is seen persistently, then restart the smith process using 'process restart <process> location <>'. If the card doesn't recover with process restart then contact the support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-3-MSG_REPLY
### Response:
(Severity: 3), (Category: L2), (Description: This error is reported when msg_reply() (LWM call) fails.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-6-INFO
### Response:
(Severity: 6), (Category: OS), (Description: An informational message only), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_CONFIG-7-ERR_NODE_VALIDATE
### Response:
(Severity: 7), (Category: OS), (Description: Failed to validate received nodeid.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-BUFFER_TOO_SMALL
### Response:
(Severity: 7), (Category: HA), (Description: The message buffer assigned to the checkpoint library by the application is less than the minimum size for successful messaging functionality. The application should increase the size of its event manager message buffer.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-TFTPSERVER_BAG_REG_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: Since the registration failed, the EDM initialization for tftpserver will be failed. System will continue to funtion and will come up.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-SW_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC3_OC12-3-GET_NODEID_ERR
### Response:
(Severity: 3), (Category: L2), (Description: SPA driver failed to obtain either its node ID or extract rack/slot/instance information (having obtained the node ID).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_12_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_12 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-ERROR_DISABLING_PORT
### Response:
(Severity: 4), (Category: L2), (Description: The PVSTAG-IO process failed an attempt to error-disable a port (in response to, for example, a BPDU being received on a port with BPDU-guard configured).), (Recommended Action: PVSTAG has attempted to error-disable the port in order to avoid a potential loop in the network. This port should be disabled until the problem is resolved.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTF_ERROR-3-PTHREAD_SETSPECIFICFAIL
### Response:
(Severity: 3), (Category: TEST), (Description: pthread_setspecific system call fails), (Recommended Action: Restart the ctfmgr process using the CTF CLI command, ctf kill manager, ctf expunge manager and ctf start manager.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL_CLIENT-3-GEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_MA-4-INIT_FAIL
### Response:
(Severity: 4), (Category: IP), (Description: Failed to initialize as producer of the Local Address Service Database), (Recommended Action: Restarting ipv6_ma may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-RX_CH_LOS_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Rx POD detects a loss of signal on a channel. This can be due to: [1] The link is configured by software to be receiving cells with an invalid transmit end [2] The link is not physically connect to the Tx side. For [1], it is a software bug where a Rx link should only be configured if it has a valid transmit end. For [2], if the Rx channel suddenly sees this without any physical change of the optical cable or shut down of the other end, then it is likely the POD channel has become defective. If the optical cable connecting the POD is cut, then the Rx POD will see loss of signal.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFINDEX_PROVIDER-3-DUPLICATE_INDEX
### Response:
(Severity: 3), (Category: SNMP), (Description: An attempt to allocate an interface index has failed because it had been previously allocated.), (Recommended Action: If this message is generated for a persistence file restore operation, delete the interface index persistence file. If this message is generated for a process restart or Standby RP synchronization operation, use the show snmp interface command to perform a sanity check of the interface name to index mappings. If any expected interface index assignments are missing, restart the mibd_interface process. Network management applications should rediscover interfaces.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-INVALID_INTR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Invalid Interrupt or mask received from sfe driver), (Recommended Action: Collect the logs mentioned in required info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key architectural aspects of MPLS implementation in Cisco IOS XR?
### Response:
The key architectural aspects are: 1) Distributed forwarding architecture where the forwarding plane is separate from the control plane. 2) Support for a wide range of MPLS applications including L3VPN, L2VPN, VPLS, and MPLS TE. 3) High availability features such as graceful restart and non-stop routing for MPLS protocols.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_AGORA_ALM_TYPE_TWO
### Response:
(Severity: 2), (Category: PLATFORM), (Description: AGORA type two alarm.), (Recommended Action: If the problem persists, call your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-3-SW_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Internal software error in initialization.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
POS-4-DB_ATTACH
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to connect to PIRD shared memory database on initialization.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTERFACE-3-CI_NOMEM_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to do DLL operation), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-CPP1_FATAL_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The CPP device driver handled a fatal CPP1 error and requested that the QFP-CPU Bridge device driver report the error to the Platform Fault Manager.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-3-CARD_EVENT_HDLR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in SERVICE-EC operation), (Recommended Action: *Contact Cisco TAC to diagnose the problem*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-SUBINTERFACE
### Response:
(Severity: 4), (Category: L2), (Description: There was a failure when processing information about the sub-interface specified in the message. It is likely that PVSTAG will not operate correctly on the port for the VLANs matched by that sub-interface.), (Recommended Action: It may be possible to recover by restarting the pvstag-io process on the affected line card, using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-3-CONSISTENCY_CHECK
### Response:
(Severity: 3), (Category: OS), (Description: A software bug when an internal data consistency check failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDP-3-DEBUG_INIT
### Response:
(Severity: 3), (Category: IP), (Description: An software error occured when the UDP process try to do debug related initialization.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-7-LTRACE_INIT_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to ltrace init failure. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICCMD-4-TRACE_INIT_FAILED
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license command library could not initialize internal tracing used for technical support.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_IM_CAPS_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error in adding CAPS), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-3-SCRIPT_ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP_CLI-3-PARSER
### Response:
(Severity: 3), (Category: MGBL), (Description: A Parser operation carried out by the HTTP CLI Agent returned unexpected results.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-MA_STATE
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The Tunnel-IP MA process failed to update the state of a tunnel interface.), (Recommended Action: Collect debugging information, remove tunnel interface, re-create tunnel interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-NT_SWO_PCIE_SWITCH_NOT_READY
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver uses the scratch registers on the PCIe Switch to exchange protocol messages with its peer running on a different Shelf Controller card. Before spawing the thread which runs the switch redundancy protocol, the driver attempts to verify that the PCIe switch is visible on the PCIe bus. If it is not visible, then the driver periodically prints this log message to alert the operator.), (Recommended Action: Reload of the both the SC and the Switch Card may be required to recover from this condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
USB-3-DEV_COMPACTFLASH_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Compact Flash transaction is taking excess time.), (Recommended Action: The external compact flash device is not working correctly. Re-insert or replace with another device.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PP_PRODUCER-3-PPINDEX_GLOBAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: Global indexing is not yet supported.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROLEX-6-GEN_ERR
### Response:
(Severity: 6), (Category: INFRA), (Description: Rolex driver encountered fault in device initialization.), (Recommended Action: Collect rolex driver traces. Try restart of process rolex and/or OIR RP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-INRESET_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This message indicates that the node has being brought down to IN_RESET state due to multiple critical alarms.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-3-IM_POWER_ON_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: Interface Module failed to Power On), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DHCPV6-3-SYSDBINIT
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred when initializing the system database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SEM
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-6-SLICE_SHUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Slice is shut down and all active interfaces on the slice will also brought down.), (Recommended Action: None tac_details: None)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-6-COLD_RESTART
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message is used to report cold reboot of Services PLIM.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_GET_NODEID
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed to obtain either its node ID or extract rack/slot/instance information (having obtained the node ID). The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger respective RP/SC switchover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-PROC_ROLE_CHANGE
### Response:
(Severity: 3), (Category: OS), (Description: Failed to register the role change with the system manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-5-MSG_CKSUM_ERROR
### Response:
(Severity: 5), (Category: OS), (Description: The message received by an application had a wrong cksum value. The message data could be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp redistribute-internal' command in IOS XR BGP configuration?
### Response:
The 'bgp redistribute-internal' command is used to allow the redistribution of iBGP learned routes back into IGP protocols. By default, BGP does not allow the redistribution of routes learned via iBGP into IGP protocols such as OSPF or IS-IS. This command overrides that behavior. It is useful in scenarios where you want the BGP learned routes to be propagated into the IGP for faster convergence.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INIT-2-MBI_BOOT_HOLD_TIMEOUT
### Response:
(Severity: 2), (Category: OS), (Description: An application set the MBI boot hold and it was not released within the specified timeout. This could indicate that the node is having problems and will be reset.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-SPAN_SRC_PORT_DELETE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A failure has occurred while deleting source port from a span session.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_TUNNEL_EA-3-INIT_ERR2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate errors during initialisation. %s - indicates the reason for the failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_ABORTED
### Response:
(Severity: 6), (Category: INSTALL), (Description: An install operation was aborted by the system. This is usually due to the Install Director restarting or an RP failover during the initial phase of an install operation.), (Recommended Action: Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-FABRIC_CAPACITY_LOG
### Response:
(Severity: 3), (Category: FABRIC), (Description: LC asic's band width degrades as losing fabric links. Reports available capacity in percent.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PW_INTR_HDR_PRS_HDR_TYPE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PW_INTR_HDR_PRS_HDR_TYPE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-6-ENFORCE_EVAL
### Response:
(Severity: 6), (Category: LICENSE), (Description: The licensed feature is enabled for evaluation.), (Recommended Action: The customer may consider to register for licenses.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9KPAGENT-7-OPERATION_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a programmed diagnostic debug message.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-2-CPI_NO_PEER_VALIDATION
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This error can happen if the active RSP or its peer RSP is improperly seated in the chassis.), (Recommended Action: This error can happen if either RSP is improperly seated in the chassis. 1. Please make sure the FPD versions on the RSPs are up to date. Upgrade them if they are not. 2. Please reseat the standby (i.e. the peer) RSP into the chassis taking care to make sure it is complelely seated. 3. If the error persists, perform an RSP switchover, via the following CLI command: <CmdBold>admin redundancy switchover<NoCmdBold> 4. If the error disappears on the new active RSP, the issue is resolved. Else, reseat the new standby RSP carefully. 5. If the issue still persists, collect the following and please contact your Cisco techical support representative. <CmdBold>show platform<NoCmdBold> <CmdBold>show logging local location <active RSP location><NoCmdBold> <CmdBold>show tech-support shelfmgr<NoCmdBold> <CmdBold>show version<NoCmdBold> <CmdBold>admin show canbus server-stats location all<NoCmdBold> <CmdBold>admin show canbus trace location <active RSP location><NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-6-LINK_DOWN
### Response:
(Severity: 6), (Category: FABRIC), (Description: Ingressq link has been shut down due to admin configuration. Ingressq ASIC won't be able to use this link for data traffic.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-GROUP_CREATE
### Response:
(Severity: 7), (Category: OS), (Description: When RDS tried to create rds group, it failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-MPA_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to initialize MPA due to an internal software error. The error message describes the error.), (Recommended Action: Please try to recover by doing the process restart of the process that generated the error. If it doesn't resolve the issue, please try to recover the MPA using CLI 'hw-mod subslot <> reload'. Gather the output of the CLI 'show tech-support ethernet interfaces'. If the issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR bandwidth protection feature?
### Response:
The MPLS TE FRR bandwidth protection feature allows bandwidth to be reserved for backup tunnels to ensure that sufficient bandwidth is available for fast reroute traffic after a failure. It prevents backup tunnels from being used for other traffic and ensures that FRR can always redirect traffic successfully.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ARP-4-WARN_SPIO_ATTACH_FAIL
### Response:
(Severity: 4), (Category: IP), (Description: An error occurred while attaching interfaces to SPIO. ARP has scheduled a retry for this operation. ARP will not be able to send or receive ARP packets on these interfaces until this is resolved.), (Recommended Action: The process may recover by itself as there is a retry mechanism. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WATCHDOG-3-PD_CONNECT_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: Watchdog connect with platform failed. Log message and continue with heartbeat punch with default value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_COMMS-3-MY_SAVE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The client failed to save its own sequence data to Checkpoint. If the process restarts before the save is successfully retried, remote clients may get out of sync, and data loss could occur.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPENET-7-ERR_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Internal error while receiving a packet over the control network on to the service processor. Error is harmless if only one or two are seen. If seen in a persistent manner, call support.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_SIG_ERR
### Response:
(Severity: 5), (Category: ROUTING), (Description: Signalled error received for the specified tunnel, destination and LSP.), (Recommended Action: The reported signalled error may be investigated if desired. \ This is a solicited message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_AAA_CONN_DOWN
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA received a notification from AAA while the connection was down. The most likely reason for this a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PORTMODE-3-PROC_INIT_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred during initialization with a necessary service for the process. The process is unable to run.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospf_uv process was unable to register with SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls ip propagate-ttl' command in IOS XR?
### Response:
The 'mpls ip propagate-ttl' command is used to enable the propagation of the IP TTL (Time-to-Live) value into the MPLS label stack. By default, the IP TTL is decremented only at the ingress and egress LSRs. This command allows the TTL to be decremented at each hop in the MPLS network, providing a way to prevent forwarding loops and limit the lifetime of MPLS packets.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_PIDB-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational message. No action needed), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN bridge group and bridge domain?
### Response:
To configure an L2VPN bridge group and bridge domain, use the 'l2vpn' and 'bridge-domain' commands in global configuration mode. l2vpn
bridge group BRIDGE-GROUP-NAME
bridge-domain BRIDGE-DOMAIN-NAME
interface GigabitEthernet0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-VOLT_ALARM_SHUTDOWN_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that shelfmgr failed to shutdown the card either because of communication failure or because the shelfmgr rejected the shutdown request.), (Recommended Action: This condition indicates a potential problem with the card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What happens to the configuration when you replace a node with a higher or lower density node in IOS XR?
### Response:
When replacing a node with a higher density node, IOS XR retains the existing configuration and applies it to the new node. When replacing with a lower density node, the configuration for the interfaces that no longer exist is automatically removed.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-3-AGT_INIT_FAIL
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An error occurred during initialization, causing SRG Agent process to abort and it will be restarted to attempt to resolve the issue.), (Recommended Action: Contact Technical Support. Repeated occurances will affect the working of the Subscriber redundancy feature and also have performance and scale impact on Subscriber features in general.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth feature?
### Response:
The MPLS TE auto-bandwidth feature allows MPLS TE tunnels to automatically adjust their bandwidth based on measured traffic flow. It measures the average output rate and adjusts the tunnel's bandwidth up or down based on a configurable adjustment threshold. Auto-bandwidth aims to right-size tunnels to actual traffic needs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CHKSUM_ERR_1_FIA_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checksum error - 1 from FIA on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL-3-UNKNOWN_HANDLE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The EA received a datapath control indication for an unknown interface handle), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_13_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-2-CLIENT_NOTIFY_FAILED_MAX_THRESHOLD
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: An error was enountered when attempting to alert a packet- processing client of packets that have been delivered to it for processing, and repeated retries have not resolved the problem. No further retries will be attempted.), (Recommended Action: Restarting the process with the Process ID specified in the message may resolve the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-1-PLANE_OOS
### Response:
(Severity: 1), (Category: FABRIC), (Description: If a fabric plane is out of service, it means that plane has already been put into out of service before upgrade/reload. this fabric plane cannot be used for any data traffic.), (Recommended Action: Ensure that fabric cards are installed in the system. For multichassis systems ensure that the fabric racks have booted and the fabric cables are installed. Find out the reason for the plane to be moved to OOS before upgrade or reload. Once the issue is fixed, clear the plane status by running admin show controller fabric plane status <plane no> /all command and then do admin shut and unshut on that plane.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-6-INFO_SUCCESS
### Response:
(Severity: 6), (Category: SECURITY), (Description: The sshd successful login information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-HELPER_INIT_FAIL
### Response:
(Severity: 3), (Category: HA), (Description: The system failed to initialize helper library. This is a fatal error for wdsysmon.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-OD_OPERATION_CLEANUP_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The SLA Client Library either failed to cleanup the on demand operation or failed to start a timer to cleanup the operation on its expiry. There will be no retry attempt to clean this operation up and until it is cleaned up manually the associated system resources will still be in use.), (Recommended Action: Manually clear the on demand operation via a manageability view (CLI, XML etc). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-INCOMING_PKT_TOO_BIG
### Response:
(Severity: 4), (Category: SECURITY), (Description: The packet size is limited to 32K, in case that peer sends out long length info forcing large buffer allocation (DOS).), (Recommended Action: 'Contact the remote peer and/or his administrator')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-ASIC_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The driver failed to initialize asic with the above reason.), (Recommended Action: The asic will restart and try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_EA-3-SSC_SEND
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a batch of messages to the Service Director. The Service Director may not be up to date with the state of services on this node, so InterFlex interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the InterFlex EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SIGNAL_NUMBER
### Response:
(Severity: 4), (Category: OS), (Description: Signal info), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between Level 1 and Level 2 routing in IS-IS?
### Response:
IS-IS uses a two-level hierarchical routing model. Level 1 routing is performed within an area. Level 1 routers know the topology of their area and can route within the area. Level 2 routing is performed between areas. Level 2 routers know the Level 2 topology and can route between areas.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-TABLE_ROUTE_RATE
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route rate in a table), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_CPP_PM-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Manager encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show log location <r/s/i> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show log location <r/s/i> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers sip-pm trace info location <r/s/i> <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers sip-pm trace info location <r/s/i> <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_SW_HW_INCOMPATIBLE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_SYSDB_CONDITIONAL_DELETE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'sysdb conditional delete operation failed. The error is displyed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-4-NEG_ERROR
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The SRG role negotiation between peer routers has encountered error in specified role. This is a warning and would break the session sync if it is not resolved i.e if both peer routers are either in master or slave mode. Normally if this is transient condition it will resolve by itself.), (Recommended Action: Check to ensure that the two peering routers have different SRG roles for the specified group. If not, verify that the initial preferred role is not configured to be the same on both ends. Fix configuration inconsistency and then disable/enable the group to rectify the condition.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-DOCKER_RMI_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr has errored or failed while trying to remove a docker image. This means the underlying docker rmi operation has failed. The docker image specified may continue to exist.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-4-REMOTE_NODEID_MSG_STR_CREATE_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Either an invalid location is being queried, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IP_EA-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-ENDBULK
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-7-ERR_SYSDB_FD
### Response:
(Severity: 7), (Category: SECURITY), (Description: Error encountered while using the System Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ORA-3-MISSING_OPERATOR
### Response:
(Severity: 3), (Category: ROUTING), (Description: There is a function declared within the various docked ORAs at this attach point that uses an operator that does not exist with the same set of docked ORAs. Please contact support.), (Recommended Action: Copy the error message as it is and contact support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MOTHRA-3-PIO_FATAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A fatal error occurred in Santa Driver which involves exiting the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-TE_ENCAP_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: In tunnel label create/update, adding path encap failed due to ENCAP Table OOR .), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-2-MODE_CHANGE
### Response:
(Severity: 2), (Category: L2), (Description: SPA WAN mode changed to lan/wan from CLI. To complete the mode change the SPA must be power-cycled.), (Recommended Action: Power-cycle the SPA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-COMPLETE_SYNC
### Response:
(Severity: 6), (Category: INSTALL), (Description: Sync successfully completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_EVENT_CONN_ERROR_FAIL
### Response:
(Severity: 4), (Category: SECURITY), (Description: After detecting an error with the connection to the specified service, the Firewall controller failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_REGCOMP
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The process failed to compile the given regular expression.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-ETHSERVER_CONNECT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and Ethernet server. The MBI operation in progress will not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2TP-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: L2TP initialization failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_MFWD_FRETTA-3-ERR_EXCEED_MAXIMUM_OLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The route (S,G) has hit the maximum number of OLEs local to this LC. No more OLEs beyone maximum support number will be hardware programmed. clear pim topology <S, G>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_MAIN-6-NOT_SUPPORTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This line card does not have hardware support for Synchronous Ethernet and 1588 operation.), (Recommended Action: Upgrade MB IOFPGA to version greater than or equal to 1.8.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-RESERVE_RETURNED
### Response:
(Severity: 6), (Category: LICENSE), (Description: None.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-3-ERR_TTY_DETAILS
### Response:
(Severity: 3), (Category: IP), (Description: An unexpected error occurred when RloginD tried to retrieve the details of a VTY from a utility library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-CDR_HM_ENABLE
### Response:
(Severity: 6), (Category: FABRIC), (Description: Enable/Disable the CDR Health Monbitor for Inbar seal), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL1_HI_EOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL1_HI_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN_ICCP_SM-4-LOCAL_ACCESS_MAIN_PORT_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: ICCP-SM has detected a failure with the interface main port and has attempted to failover.), (Recommended Action: Use the <CmdBold>show l2vpn iccp-sm<NoCmdBold> and the <CmdBold>show interface<NoCmdBold> commands to determine the cause of the interface mainport failure. Correct the failure for the given interface and the ICCP-SM fault will clear.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-EVENT_ERR
### Response:
(Severity: 6), (Category: ROUTING), (Description: Event handler error ERRNO. This system encountered an error ERRNO trying to get an event from the event handler.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-4-MAP_CACHE_WARNING_THRESHOLD_REACHED
### Response:
(Severity: 4), (Category: IP), (Description: 'This message is an early warning that the map-cache size ' 'is approaching its limit. ' 'The limit may be reached during normal operation, if ' 'a (P)ITR encounters traffic to many different ' 'EID-prefixes, though this may also occur if someone is ' 'performing an address-space scan. ' 'If the cache size limit is reached, ' 'new entries will replace old/inactive ones, as required. ' 'If the map-cache limit is set too low, actively used ' 'EID-to-RLOC mappings may be replaced continously, which ' 'causes traffic to be dropped while these mappings are (re-)' 'acquired. As long as only inactive map-cache entries are ' 'replaced, the impact should not be significant. ' 'Furthermore, it is worth noting that it is normal for the ' 'cache to have a limit, for example to set an upper limit ' 'on the amount of memory required. To diagnose this ' 'issue, it may be helpful to inspect the map-cache using ' 'show lisp {ipv4|ipv6} [eid-table <vrf>] map-cache. It can ' 'also be cleared with ' 'clear lisp {ipv4|ipv6} [eid-table <vrf>] map-cache. ' 'This syslog message can be turned off by removing the ' 'warning-threshold <percentage> configuration statement ' 'from the map-cache-limit configuration.'), (Recommended Action: 'If this warning persists, and traffic drops are ' 'experienced, consider re-evaluating the map-cache ' 'limit and if necessary configure a higher limit.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-3-INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred during the initialization of the process. This may have resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-CLINFO_UNHOLD
### Response:
(Severity: 3), (Category: OS), (Description: Failed to unhold the client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-DRVR_INFO_REQUEST_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 'FGID was unable to send a request to sfe_driver to get driver info'), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-3-TAM_AUTH_FAILED
### Response:
(Severity: 3), (Category: DRIVER), (Description: TAM AUTHENTICATION FAILED), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-PCIE_FATAL_ACCESS_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCIE access error was detected for controller Card. The error prevents this card to do traffic switching thereby making it unusable), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-4-NOSUCH_INTF
### Response:
(Severity: 4), (Category: SECURITY), (Description: The interface specified as source interface is not present.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RIB_DISCONNECT
### Response:
(Severity: 3), (Category: ROUTING), (Description: On multi-chassis, when RIB is not collocated with BGP, failed to disconnect.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-3-BAD_NVRAM_MAP
### Response:
(Severity: 3), (Category: MEDIA), (Description: Mapping of Nvram Failed), (Recommended Action: 'Check for 2MB size NVRAM')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-MPA_POWERUP_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power up command for MPA failed, MPA is not booting after several retries), (Recommended Action: collect mpa_mgr traces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-PFI_PARITY_ERROR
### Response:
(Severity: 4), (Category: FABRIC), (Description: Ingressq, cpuctrl net interface Rx FIFO last sync.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS_MIB-3-ERR_MAKE_VAR_BIND
### Response:
(Severity: 3), (Category: OS), (Description: An allocation has failed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR computational enhancements feature?
### Response:
The MPLS TE FRR computational enhancements feature optimizes the calculation of backup tunnels to improve scalability and performance. Techniques include incremental SPF (iSPF), backup path calculation throttling, and the use of a TE backup SPF (BSPF) algorithm. These enhancements reduce CPU overhead and allow FRR to scale to a larger number of protected tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_CHKPT
### Response:
(Severity: 3), (Category: IP), (Description: An attempt to initialize or read for checkpointing of IPv6 ND has failed. This error is normally transient and can be recovered from. If the error condition cannot be recovered from, IPv6 ND will not function properly.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BPE-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BPE encountered a fatal memory allocation error), (Recommended Action: Please attempt to correct the error by restarting the process by issuing the command in exec mode -process restart bpe If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-6-ENCAP_TYPE
### Response:
(Severity: 6), (Category: L2), (Description: Debug Information - Displaying Shim information), (Recommended Action: *None*.Informational message only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-RIB_MSG
### Response:
(Severity: 3), (Category: ROUTING), (Description: A call to an external RIB function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_PLU-1-PLU_RESMON_OOR_ORANGE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: PLU resmon on the node has detected that the number of routes has exceeded prescribed limits. Any further increase routes will lead to traffic loss.), (Recommended Action: Take immediate action to delete routes from the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-4-SVR_BIND_ERR
### Response:
(Severity: 4), (Category: L2), (Description: 'There is a software error when trying to bind to IM.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-MAGIC_NUM_INVALID
### Response:
(Severity: 7), (Category: OS), (Description: A feature record has an invalid magic number.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-1-SET_ALL_FANTRAYS_REMOVED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Software has detected that all fan trays have been removed from the chassisbut, but gives user 45 seconds to insert another tray. If no action is taken within 45 seconds, the chassis will be shut down.), (Recommended Action: Insert a fan tray within 45 seconds.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_SYSMGR_MDR
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error whilst communicating with SysMgr. The error message describes what operation has failed and why it failed. Sysmgr will take action to recover if appropriate. It is possible that this error has occured after MDR. If so then the recovery may require a cold reload of the card), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-SECURE_MODE_DISABLED
### Response:
(Severity: 6), (Category: INFRA), (Description: ZTP secure mode disabled.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_1_PKT_MINLEN_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-1 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-EVENTMGR
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an unexpected event has been delivered to the process that printed this message. An error occurred within event manager.), (Recommended Action: Please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-ISSU_MILESTONE_STATE_CHANGE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: As part of the ISSU operation, there are multiple stages that Link-OAM must complete before the switchover to V2 can occur - the feature has failed to transition successfully between stages.), (Recommended Action: Abort the ISSU and remove all Link-OAM configuration before attempting the ISSU again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-MA_EVM
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that the event processing infra has returned an error. Particular reason is included in the message.), (Recommended Action: Allow PBR MA to restart with the command <CmdBold>process restart pbr_ma location <node id><NoCmdBold> If the problem persists, contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-WARNING
### Response:
(Severity: 4), (Category: ROUTING), (Description: There is a subnet mismatch between eigrp neighbors.), (Recommended Action: Verify the primary IPv4 address on both ends of the specified interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an IPv6 BGP session in IOS XR?
### Response:
To configure an IPv6 BGP session in IOS XR, you define the neighbor and activate the IPv6 address family. router bgp 65000
neighbor 2001:DB8::1
remote-as 65001
address-family ipv6 unicast
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
hytop-3-INTERNAL_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A driver internal failure occurred which involves exiting the process.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this failure is encountered, to recover Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace location < > <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace location < > <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-2-ADJ_OOR
### Response:
(Severity: 2), (Category: ROUTING), (Description: AIB has detected an out of resource condition for adjacency. Normal operation cannot resume until adjacencies are deleted. Please delete adjacencies and wait for AIB to get back to normal operation with ADJ_OOR_CLEAR message.), (Recommended Action: Use the following command to identify producers of adjacencies and the updates, deletes from them. <CmdBold>show adjacency producer detail location <node><NoCmdBold> Use the command provided by each producer to delete the adjacencies. Use the following commands to identify the number of adjacencies for that node, after AIB gets back to normal, make sure to restart the producers to get download all adjacencies to AIB. <CmdBold>show adjacency summary location <node><NoCmdBold> <CmdBold>show adjacency summary remote location <node><NoCmdBold> Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_3_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_MGT_CV_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-0 MGT code violation on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-MALFORM_UPDATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: This message indicates that the UPDATE message contains one or more malformed attributes. Depending on the nature and severity of the error and error-handling configuration, one of the following actions has been taken: discard the attribute, or treat the UPDATE as withdraw, or reset the session, or ignore the entire update message.), (Recommended Action: The malformed UPDATE messages are available in 'show bgp update in error'; it should be decoded and analyzed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-SVI_WRONG_CONFIG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred while configuring serviceInfra configuration. Cause of the error will be mentioned in the message displayed. This error will prevent launching application in services PLIM and won't let it come to UP state.), (Recommended Action: Check serviceInfra config ('show run int serviceInfra *') again. check infra ip subnet mask (max /29 for SESH & /30 for CGN) and service location is correctly configured. Reload the LC ('hw-module location <x/y/cpu0> reload').)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CARD_POWER_CFG_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Setting of the reload attribute on the indicated card has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-AIS_LCK_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: A new AIS or LCK signal was received by a local MEP or an existing signal expired. This message appears because the service to which the local MEP belongs has AIS logging configured.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMP-3-FATAL_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software fatal error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different IS-IS packet types?
### Response:
The main IS-IS packet types are: IIH (IS-IS Hello), LSP (Link State PDU), CSNP (Complete Sequence Number PDU), and PSNP (Partial Sequence Number PDU).
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EDRM_CLIENT-3-DOUBLE_FREE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: EDRM client process performed double free of memory block.), (Recommended Action: No manual recovery action required. In some cases, the client process may be restarted after core dump.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-PROTOCOL_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Protocol error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the Bridging module in the platform L2FIB BRIDGING component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DCL_LIB-4-NONFATAL_INTERNAL
### Response:
(Severity: 4), (Category: HA), (Description: A Non-Fatal condition was encountered. This is not necessarily an error, but information gathered here may help with debugging other problems elsewhere in the system.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_MAC_IWF_IF_SES_LIMIT_REACHD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address on the given access interface has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_REROUTE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface has been rerouted.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status reroute' \ interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIC_UDI-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Miscellaneous software error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-THREAD_CREATE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This may be a problem with lack of resources. The MBI infrastructure will be unable to carry out all of its expected functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-7-OPERATION_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a programmed diagnostic debug message.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_ACC_IF_SES_LIMIT_NOT_REACHD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on the access interface is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TTI_MISMATCH_DEMD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-4-PROVISION_PRE_CHECK_CALV_TFTPBOOT
### Response:
(Severity: 4), (Category: MEDIASVR), (Description: This ios_msg is raised when provision prechecks are performed on the disk/system), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_INVALID_MTU
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: An access-interface has been configured with an MTU that is incompatible with a PPPoE sub-interface. The <CmdBold>PPP-Max-Payload<noCmdBold> tag provided by connecting peers is used to places a lower bound on the MTU that can be configured on an access-interface.), (Recommended Action: Revert any configuration changes made to the access-interface's MTU or reduce the configured maximum value for <CmdBold>ppp-max-payload<noCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-SETUP_ENET_DEVICE_ERR
### Response:
(Severity: 3), (Category: OS), (Description: While trying to restablish connection to the ethernet server, it results into a failure. Here We try to perform the re intialization of the enet device by perfoming pulse attach and arm the device to pulse us on data available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-OPTICS_TX_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Optics has detected/cleared Tx fault on this port), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-4-FAILED_OUTPUT_ERROR
### Response:
(Severity: 4), (Category: INSTALL), (Description: A user error occurred but failed to be output to the user.), (Recommended Action: Repeat the operation. Consult the release-notes if applicable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-4-DBG_REGISTER_FAILED
### Response:
(Severity: 4), (Category: ROUTING), (Description: The process failed to register with the debug module for printing messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CARD_PCI_NTB_SWITCHOVER_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Card PCI Non-Transparent Bridge Switchover operation reported a failure condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-BIND_NO_RETRY_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'while registering with AIB server Registration failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDP-4-NO_KNOWN_MEDIA
### Response:
(Severity: 4), (Category: L2), (Description: CDP failed to initialize the media module because it could not find any media that it recognizes. This may be a normal situation if CDP does not support the interface types on this node. In other circumstances CDP should recover automatically by restarting.), (Recommended Action: If there are no interfaces on this node with a media type that CDP is expected to run on then this could be a normal condition. If it is expected that CDP should run on the type of interfaces on this node then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPT-3-ENTRY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpt entry is not available. %s - rsc name.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1-2-TIMESLOTS
### Response:
(Severity: 2), (Category: L2), (Description: Requested framing is unframed then check if there are any timeslots already used since unframed framing results in creation of full t1 or e1 bw serial interface), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-2-PARENT_UNREGISTER
### Response:
(Severity: 2), (Category: ROUTING), (Description: A RIB download client (typically bcdl_agent), unregistered from a table while it still has children referring to this table. The number of routes may no longer be insync in all FIBs. If corresponding bcdl_agent restarted just before this message was seen, this error message can be ignored.), (Recommended Action: Restart the corresponding bcdl_agent process. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-4-WARN_SYSDB_BAG_ENCODE
### Response:
(Severity: 4), (Category: SNMP), (Description: Failed to encode a bag. The access to SNMP statistics and MIB information through 'show snmp' CLI command might not be available. This is likely due to an internal software error.), (Recommended Action: Restart snmpd process.if still noticed this message check the state of snmpd process 'show process snmpd' and contact technical support representative. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-3-PTFM_CARD_TYPE_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Interflex Manager failed to get supported card type from platform at startup. The process will be automatically restarted, if it keeps restarting with same message *DDTS*), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-4-EAD_SINGLE_ACTIVE_NOTSUP
### Response:
(Severity: 4), (Category: L2), (Description: Backup path is not yet supported, only aliasing. A EAD/ES or EAD/EVI route was received in which the Single-Active bit was set in the ESI Label extcomm. Customer needs to correct the remote ethernet-segment to all-active mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_SYSDB_DATALIST
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_AHS_LOS_LANE2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_TME_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HM-3-FPING_FAILED
### Response:
(Severity: 3), (Category: HA), (Description: HA Health Monitor Fabric ping failed), (Recommended Action: Here Shelf Manager should receive a critical alarm from HA Health Monitor for this error. The node should be reset by Shelf Manager. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-ISSU_NODE_OUT_OF_MBI
### Response:
(Severity: 6), (Category: INSTALL), (Description: As part of ISSU operation, the specified node that was warm reloaded (iMDRed) will now be brought out of MBI to XR RUN in the new version of the software.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON_LIB-3-UNEXPECTED_EXIT
### Response:
(Severity: 3), (Category: INFRA), (Description: Watchdog monitoring service exited unexpectedly. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-PROCESS_MANAGER_CONNECT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error. Frequency synchronization on this line card is disabled.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_STAT_VEC_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 state error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCTRL-3-CONFD_CONNECT_ERR
### Response:
(Severity: 3), (Category: LIB), (Description: Failure returned by cdb_connect()), (Recommended Action: Collect 'show tech-support ctrace' .)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-7-SHOW_CLEAR
### Response:
(Severity: 7), (Category: OS), (Description: A sysdb show/clear callback information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR3_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-3 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_P2P_ID_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the P2P auto-tunnel aborted since all IDs in the P2P auto-tunnel ID range have already been allocated.), (Recommended Action: Increase the P2P auto-tunnel ID range.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPP_PKT_TOO_LONG
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPP packet too long error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_MEMMGR_UTIL-7-NOT_IMPLEMENTED
### Response:
(Severity: 7), (Category: HA), (Description: Unimplemented functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-FD_NORMAL_LIM
### Response:
(Severity: 6), (Category: HA), (Description: A process has recovered from minor/major/critical level of FD usage.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-CC_ERROR
### Response:
(Severity: 6), (Category: L2), (Description: A change in the errors reported by a CCM message from a peer MEP was detected. This message appears because the service which the local MEP belongs to has continuity-check error change logging configured.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_CFEC_BDI_DEM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: An error was returned when the IM Attribute EDM server called the debug_register() function.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-DESTROY_CHUNK
### Response:
(Severity: 4), (Category: ROUTING), (Description: 'BGP has resized its bit fields, so the old bit field chunks should be ' 'destroyable. Nonetheless, BGP is unable to destroy the old chunk and, ' 'hence, cannot release unwanted memory.'), (Recommended Action: This error will not cause any erroneous behavior, hence no further action is needed to rectify the situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-EXTCOMM_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: While attaching extended communities to the path attribute we reached the maximum extended community limit and as a result we failed to add one or more extended community to the path attribute.), (Recommended Action: Check the configuration. Please collect show running-config output if contacting TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_EVM_CONN_SETRETRY
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-STARTBULK
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-TOP_SHMEM_USERS_WARNING
### Response:
(Severity: 4), (Category: HA), (Description: This message is emitted when system memory usage crosses a threshold in the direction of increasing memory exhaustion. The top shared memory users will follow in the next messages. There may be a memory leak or misconfiguration.), (Recommended Action: Collect the data from the following messages and attempt to determine what is driving memory usage. Forward the messages to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-5-SW_RESYNC_END
### Response:
(Severity: 5), (Category: INFRA), (Description: The specified node needed to refresh its software base. It successfully resynchronized, and will now reboot to use the new software.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-CPU_ERR_INTR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Card manager has detected that there is a CPU error interrupt from one of the sources mentioned in CPU ERR INT STATUS REG), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_GROUP_NODESET
### Response:
(Severity: 3), (Category: OS), (Description: Displaying the memberset details of a failed _nodeset call.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-GOLDXR_FAIL
### Response:
(Severity: 3), (Category: DIAG), (Description: An error occurred, likely due to an invalid argument was entered.), (Recommended Action: Copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-2-CRIT_FSB_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A critical error has occurred on the FSB (Front Side Bus) of the Linecard's CPU complex. The message will display the name of the error and the description along with the hardware log. These errors will cause a card reload. If it is a software error and persists or if it's a hardware error, please contact support.), (Recommended Action: If it is a software error and persists or if it's a hardware error, please contact support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-4-RX_LOSS
### Response:
(Severity: 4), (Category: L2), (Description: The PLIM received an Rx LOS or LF on the given interface which will result in a link flap.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMIAP-4-VIRTUAL_IP_CFLCT
### Response:
(Severity: 4), (Category: IP), (Description: IP address on the management interface specified is conflicting with the virtual IP address.), (Recommended Action: Either change the virtual IP address to some other IP address on the management interface's network or change the conflicting IP address on the specified management interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-PLIM_RELOADING
### Response:
(Severity: 5), (Category: L2), (Description: Reloading SPA because of heartbeat failure.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EEM-1-ACTION_SYSLOG_LOG_ALERT
### Response:
(Severity: 1), (Category: HA), (Description: The action_syslog call from tcl script.), (Recommended Action: Please verify command(s) mentioned in tcl script prior to error message are working fine (on router prompt). If issue is still seen then please provide command details which has resulted into this error condition to technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-4-ND_WARN_AN_NOT_ENABLED
### Response:
(Severity: 4), (Category: SERVICES), (Description: 'autonomic adjacency-discovery will be enabled only after AN is ' 'enabled globally, and on this interface'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-ISM_PD_LIB_INIT_FAIL
### Response:
(Severity: 2), (Category: INSTALL), (Description: ISM_PD_LIB_INIT_FAIL occurs while FSM create, push and register fails. Please contact TAC for further details.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the differences between the old-style and new-style IS-IS TLV metrics?
### Response:
Old-style TLV metrics are 6 bits wide with a maximum value of 63. New-style TLV metrics are 24 bits wide with a maximum value of 16,777,215. New-style TLVs allow more granular metrics and larger topologies.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ce_iso-2-DISABLING_PORT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fault detected while disabling the port because of the failure of disabling functionality. Isolating RP node from the CE network is failed. Enable/disable a particular LC FE link), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'show bgp l2vpn vpls' command in IOS XR?
### Response:
The 'show bgp l2vpn vpls' command is used to display BGP information for VPLS instances. It shows the VPLS ID, the BGP route distinguisher and route targets, the BGP next hop, and the label used for the VPLS instance. This command is useful for verifying the BGP control plane information for VPLS.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_1_ERR3_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-3 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR handle configuration when replacing a node with a different type of node?
### Response:
When replacing a node with a different type of node in IOS XR, the system automatically removes the configuration specific to the old node and applies the default configuration for the new node type. Any additional configuration must be manually applied.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAOC768_API-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message from the PLAOC768 system checkout Library to indicate either anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-SPKR_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the BGP speaker process. If this occurred during process startup or RP Switchover, then the process may be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_PORTMODE-4-HW_MOD_CONFIG_FAILURE
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: A warning scenario occurred as portmode data already exist for particular rsip,for which hw_module configuration is deleted.), (Recommended Action: Delete the portmode data for the particular rsip.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng auto-tunnel backup tunnel-num' command in IOS XR?
### Response:
The 'mpls traffic-eng auto-tunnel backup tunnel-num' command is used to configure the range of tunnel interface numbers to be used for auto-tunnel backup tunnels. Auto-tunnel backup automatically creates backup tunnels for protecting TE tunnels based on the configured backup attributes. This command specifies the range of interface numbers to be used for these auto-created backup tunnels.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-TM_CNTL_CLUSTER_PARITY
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-4-PROTO_HW_VERSION
### Response:
(Severity: 4), (Category: L2), (Description: This message indicates that the version of the PSE ASIC is a prototype, and it is not supported by the s/w release.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_POWER_OPT_FREQ_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. NPU Power profile is not supported by all asics. User configured this config for a LC or RP (for FC cards) where asics donot support frequency change.), (Recommended Action: Remove the configuration for that LC/RP.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFO_EA_PD_STUB-7-INTF_CREATE_CALLED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What scheduling algorithms are used by the IOS XR microkernel?
### Response:
The IOS XR microkernel supports three scheduling algorithms\n1. FIFO scheduling: Thread runs until it relinquishes control or is preempted. Used for kernel idle thread.\n2. Round-robin scheduling: Limits run time of a thread to a timeslice. Used for most processes.\n3. Sporadic scheduling: Thread runs at normal priority for a set budget time before dropping to low priority. Prevents starvation.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-2-PEARL_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An LC temperature alarm was encountered.), (Recommended Action: Node will be shutdown immediately as hardware error occured.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-3-EVENT_HANDLE_CREATE
### Response:
(Severity: 3), (Category: MGMT), (Description: This comes when event manager handler creation failed due to some infra issue, the program will re-start to connect the same), (Recommended Action: The program restarts once it fails to connect to event manager infra, would be fine once that infra is up)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-1-ERR_HW_RELOAD_NODE
### Response:
(Severity: 1), (Category: L2), (Description: A hardware error is detected on the PLIM. Software will take action as described in the error message to try to recover from the error. The hardware error and the software recovery action will cause linecard reload. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Software action: %s - the action that software will take to try to recover from the error.), (Recommended Action: If the message recurs, diagnostics should be executed on the PLIM and MSC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-NOIPADDR
### Response:
(Severity: 3), (Category: ROUTING), (Description: This message is displayed if ospf is configured on an unnumbered interface that is not of type point to point. In this case, ospf will not run on this interface.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_FIB_NPU-3-PD_INFRA_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message in the SSE FIB NPU to indicate that an error was seen when trying to access PD infra resource.), (Recommended Action: Please collect the console log, FIB NPU traces (show cef trace loc <>), FIB NPU platform trace (show cef platform trace all all loc <>). Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-THREAD_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPF failed to create a thread essential to its operation. This is an internal error. An automatic restart of the OSPF process was necessary to attempt recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-5-USER_PASSWD_EXPIRED
### Response:
(Severity: 5), (Category: SECURITY), (Description: The password for user is expired. The user will be prompted for password change. Login is not allowed until the password is changed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng tunnels' command in IOS XR?
### Response:
The 'mpls traffic-eng tunnels' command is used to enable MPLS Traffic Engineering on an interface. It allows the interface to be used as part of an MPLS TE tunnel path. MPLS TE tunnels are used to provide explicit paths for traffic with specific bandwidth and other constraints.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLMGR_UI-4-DEBUG
### Response:
(Severity: 4), (Category: APP_INFRA), (Description: The policy manager ui library debug(s) could not be initialized. The is a non-fatal error and should not affect the normal functioning of the system. The only effect of this error will be that the policy manager ui library debugs may not show up .), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCM_SWITCH-3-THREAD_CREATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error occurred in bcm_process which involves exiting the process. After the bcm_process restarts, the error will be cleared.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-EVENT_CONN_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-SHUTDOWN_ON_MULTIPLE_UNGRACEFUL_RELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node has already undergone mutilple ungraceful reboots in last one hour or one day and has reached node's hourly or daily reboot threshold limit of 5 (in last one hour) or 8 (in last one day). In order to avoid further disruptions to the netwrok due to this node, its better to shut (power) down this node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_SOCK-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: L2), (Description: An error occured in the event loop. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_EA-4-ERR_MEM_ALLOC
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The process failed to allocate memory for the specified resource.), (Recommended Action: *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCM-2-IM_RETRY_CONN
### Response:
(Severity: 2), (Category: L2), (Description: Error in IM(Interface Manager) operation. We get this error if the connection with IM does not exist or IM is not ready. This happens on the LC with ATM/FR interfaces), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If it is a IM(Interface Manager) connection error, it will automatically recovered. No user action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-AVL_INIT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB maintains a database for interfaces, but was unable to initialize it. The process will attempt to recovery by restarting. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the explanatory detail indicates memory exhaustion, Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the BGP maximum prefix feature used for?
### Response:
The maximum prefix feature allows a maximum number of prefixes to be configured for a BGP session. If the number is exceeded, the session can either be torn down or a warning can be logged. This protects against misconfiguration or DoS attacks. It is configured with the neighbor maximum-prefix command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP_OFFLOAD-7-INIT_ERR
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The PTP Software Offload Plugin encountered a fatal error during initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-LOW_3_3VCC
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low in 3.3Vcc voltage. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_LIB-6-BDXC_SEND
### Response:
(Severity: 6), (Category: L2), (Description: An IPC between L2FIB and its client process failed; the message will be retried. If the error message appears just once, it can be ignored as IPC between L2FIB and its client process will be retried and connection will be established. But if the error message recurs, it could mean that IPC mechanism has failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-6-PROC_NAME
### Response:
(Severity: 6), (Category: HA), (Description: Replica name is created by combining prefix-processname-tag and suffix pertaining to the slot/LC. If the process-name is too big to fit inside the replica-name (in combination with the other prefixes and suffixes) then we need to truncate the replica_name. This is not an issue in itself, but may cause problems further down the line, if the replica name becomes non-unique within the system.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPPIF-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational message. No action needed), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-4-MUTEX_UNLOCK_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: A mutex unlock failed in the api context, for UDLD lib around the line number specified in error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support control ethernet fast location <node>, dumpcore running <process name printing this message> location <node>, console log for 1 hour before and 1 hour after this error message printed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support control ethernet fast location <node>, dumpcore running <process name printing this message> location <node>, console log for 1 hour before and 1 hour after this error message printed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_BAG_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: The process could not register the data structures used by IS-IS statistics and management agents.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PVSTAG-4-CHKPT_STDBY_CORRUPT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred while processing initial checkpointed information and the standby process is restarting. If this message is seen repeatedly, failovers may not be hitless for PVSTAG, PVRST or PVRSTAG as the standby process will not have synced up with the latest system state. If the additional delay in resynching process state is too long, peer devices may time out which could then cause forwarding loops.), (Recommended Action: If this message is seen repeatedly then removing and re-applying spanning-tree configuration (for PVSTAG, PVRST or PVRSTAG) may resolve the issue. Restarting the pvstag-io process on the active node will force an audit of the checkpoint information, which will resolve the issue. You may want to consult your Cisco technical support representative before carrying out a manual process restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-4-MDR_RECOVERY_UNSUPPORTED
### Response:
(Severity: 4), (Category: OS), (Description: Recovery action specified (MDR) for the failing service is unsupported on RP.), (Recommended Action: Collect show tech ssm. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-6-CFGED_MHOST_DEFAULT_MGMT
### Response:
(Severity: 6), (Category: IP), (Description: Management interfaces(on the RPs) are not allowed to be the mhost default interface as multicast routing is disabled on the management interface.), (Recommended Action: Change the mhost ipv4 default-interface configuration to some other physical or virtual interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-4-DEBUG_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The server process encountered an error while attempting to initialize a debug event. This means that additional verbosity will not be available via the 'debug pldmgr enable' command in IOS-XR.), (Recommended Action: No action is needed, as it is highly unlikely that these debugs will be needed, even during many error conditions. That said, the server may be restarted via a proc restart.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure a BGP neighbor in IOS XR?
### Response:
To configure a BGP neighbor, define the neighbor's IP address and AS number under the BGP router configuration. RP/0/RSP0/CPU0:router(config)#router bgp 65000
RP/0/RSP0/CPU0:router(config-bgp)#neighbor 192.168.1.2
RP/0/RSP0/CPU0:router(config-bgp-nbr)#remote-as 65001
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-6-MAC_TABLE_RESYNC_COMPLETE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-POPULATE_FILTERS_FAILED
### Response:
(Severity: 6), (Category: OS), (Description: Core dump failed because populating filters for the process mapinfo failed.), (Recommended Action: Collect the following data and raise DDTS. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-ISSU_OP_ABORT_STANDBY_RELOADED
### Response:
(Severity: 2), (Category: INSTALL), (Description: During ISSU operation, the specified standby node was reloaded unexpectedly thus the current ISSU operation is aborted.), (Recommended Action: Please ensure that the standby node is not reloaded during ISSU and retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-LOOPBACK_ADDR_UNAVAILABLE
### Response:
(Severity: 3), (Category: L2), (Description: Loopback address must be valid, configured on a looback and associated to a switch), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-2-FMEA_FAULT_CRITICAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: FMEA Event. Details as per format string.), (Recommended Action: The board will be reloaded. Switchover would occur if standby RP/RSP is NSR ready. At this stage please collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-UNMOUNT_FAILED
### Response:
(Severity: 3), (Category: MEDIA), (Description: Failed to unmount nvram: file system. Restart process or reload operation would trigger possible corruption. If there is no such symptom, this message can be ignored.), (Recommended Action: If nvram is corrupted after this message, it has to be recovered.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-v6_DATA_MDT_NO_MEM
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal Error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CFG-2-IPV6_CUSTOM_LEM
### Response:
(Severity: 2), (Category: FABRIC), (Description: The fia config has found pre-existing IPv6 internet-optimized-disable. IPv6 custom lem config is rejected as both configs cannot exist concurrently.), (Recommended Action: None If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR_EA_VERIFY-6-POLICY_ERROR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Peformance traffic service policy verification encountered the specified error), (Recommended Action: Correct the performance traffic service policy)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-2-TRANSCEIVER_REMOVED
### Response:
(Severity: 2), (Category: L2), (Description: The optic interface module was removed on the given interface which will result in a link down. The traffic may start getting dropped after this error message.), (Recommended Action: Reinsert the optic interface module. Check if the linecard reported any other errors and/or traffic loss was observed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-QDR_M_WR_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Multicast write when free page fifo empty on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_HW-2-ERROR_TLU_WRITE
### Response:
(Severity: 2), (Category: ROUTING), (Description: Hardware memory write for table lookup unit (TLU) failed. This can because 1) connection to mipc lost. 2) mipc/metro problem.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-6-GN2411_INFO
### Response:
(Severity: 6), (Category: OS), (Description: GN2411 read-write operation.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-ENTROPY
### Response:
(Severity: 3), (Category: SECURITY), (Description: TAM entropy source from Hardware RNG related error.), (Recommended Action: Attempt to recover by restarting the process tam_entropy. If that does not help, try restarting process tamsvcs_tamm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VEEA-4-BCMDPA_L1_PFC_UNSUPPORTED_HQOS_MODE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: BCMDPA L1 port PFC config failure.), (Recommended Action: Unsupported config, fix config.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-SLOW_FEEDBACK
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOCALD-3-LWA_ADD_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to enable this user to log into ksh.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_REOPT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface has been reoptimized with the specified LSP.), (Recommended Action: None. This is a solicited message (by 'logging event lsp-status reopt' \ interface configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TGN-6-OPERATION_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational condition and/or failure. The process can continue functioning as expected despite the failure.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPA_8P_GE-2-LTRACE_RETRY_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Jacket process spawns the SPA process and waits for the initialization to complete. But initialization fails putting SPA into FAILED state. As part of retry mechansim, the above message is seen.), (Recommended Action: If the issue occurs, Check the SPA state. If it is not OK, then collect the following traces 1) show plim jacket all location 2) show hw-module traces infra detailed location 3) show plim ether trace info/error location 4) console logs)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-AIB_INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured while trying to establish a connection with Adjacency Information Base Process due to one of the following reasons: 1. Failed to create & initialize event connection data structure 2. Failed to register callback function for connection open requests and error 3. Failure occured while opening the connection), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-PA_CLOSE_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to close the client connection with PA.), (Recommended Action: Restarting the client may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-WDSYSMON_REGISTER_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Error in registering with wdsysmon'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_1_XAUI_PLL_LOCK_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-1 XAUI PLL not locked on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PROXY-1-FATAL_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an severe error message in the OFA PROXY module to indicate that an error was seen during init operation.), (Recommended Action: Please collect the console log, OFA traces (show ofa trace loc <>), Also notice if the error message is transient or persistent. Notice if required critical information like inventory-data, ASIC devices, os-support has any errors or blocked process. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ETHER-3-PORT_DEL_TIMEOUT
### Response:
(Severity: 3), (Category: L2), (Description: Port deletion failed to complete within the timeout period.), (Recommended Action: Upon seeing this message collect the trace log via 'show plim ether trace error location <>' 'show plim ether trace info location <>' 'show tech-support ethernet ' and send them to the Engineering team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-4-GRE_UNSUPPORTED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: If a configuration involving an unsupported protocol is committed under a GRE tunnel interface, this message will be generated. The forwarding chain will also be programmed to drop packets of the unsupported protocol type resolving over the GRE tunnel.), (Recommended Action: Remove the unsupported configuration as follows: Execute: show running-config interface tunnel-ip* Remove any configuration under the tunnel interfaces involving mpls or IPv6 Execute: show running-config mpls ldp Remove any tunnel-ip interfaces configured under mpls ldp)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-4-EXITING_RESYNC
### Response:
(Severity: 4), (Category: L2), (Description: The UDLD Daemon failed to successfully resync with the packet infrastructure and so will now exit. It should be restarted by SysMgr, allowing it to resynchronize with external services.), (Recommended Action: The UDLD Daemon will restart automatically in an attempt to resolve the error condition. The user may also be able to identify potential system-wide issues through the error string accompanying the message and attempt to resolve these issues to assist with UDLD Daemon restarts. If the error message indicates out of memory issues Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-EVENT_FAIL
### Response:
(Severity: 4), (Category: INSTALL), (Description: Either an operation requested of the Install infrastructure has not been received successfully (and hence hasn't been processed), or an invalid message has been sent to the Install infrastructure. The Install infrastructure should continue to operate as expected for subsequent requests.), (Recommended Action: The Install infrastructure will continue to operate as expected for subsequent requests. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_DEBUG-6-REGISTER_FAILED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AVPAIR-6-BUFFER_TOO_SMALL
### Response:
(Severity: 6), (Category: OS), (Description: avpair API fails because the buffer is too small.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-UNINIT_MSG
### Response:
(Severity: 3), (Category: MGBL), (Description: one of the internal data structure is not initialized.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-INFO_STARTUP_START
### Response:
(Severity: 6), (Category: ROUTING), (Description: Startup state-machine controlled startup process begins here.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-2-CHILD_PARENT_MISMATCH
### Response:
(Severity: 2), (Category: ROUTING), (Description: A RIB download client (typically bcdl_agent), unregistered from a table while it was out of sync with its parent. The number of routes may no longer be insync in all FIBs. If corresponding bcdl_agent restarted just before this message was seen, this error message can be ignored.), (Recommended Action: Restart the corresponding bcdl_agent process. *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ct_agent-3-ERR_SYSDB_PACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKWATCH-6-HEADER_CORRUPTION
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: The particle/header free list and particle/header free count are out of sync; probable corruption of packet memory.), (Recommended Action: Please collect a core dump of the process from which the message is output, using the 'dumpcore running' command to catch the current packet memory state ('exception pakmem on' must also be configured). Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_LIB-4-ERR_POSSIBLE_CONNECTION_LEAK
### Response:
(Severity: 4), (Category: ROUTING), (Description: A client passed a pointer to rib_bind which points to a non-NULL connection. This implies a connection leak in the client code.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-INTF_MAC_ADDR_CHG_INVALID
### Response:
(Severity: 6), (Category: ROUTING), (Description: IS-IS received MAC address change notification for non LAN interface. ISIS ignores the notification. The message is only informational.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-BANDWIDTH_RANGE
### Response:
(Severity: 3), (Category: QOS), (Description: The minimum bandwidth or shape rate configured is out of the supported bandwidth range at this level. The message will provide further details on the error.), (Recommended Action: Please adjust the bandwidth parameters in the policy map.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_ECN_THRESH_UPDATE_FAILED
### Response:
(Severity: 3), (Category: FABRIC), (Description: Update of the ECN threshold for the specific traffic class failed.), (Recommended Action: System LC is inconsistent. Need to reload the line card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. 1. show tech-support for qos and fabric 2. Collect all traces:'show controllers npu trace all location <loc>' 3. show logging location <loc> 4. show controllers npu-cfg trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-3-DETECTED_TRUNCATED_TX_PKT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error indicates that a packet sent to the squidlib code by the client was truncated while the squidlib code was trying to send the packet. The squidlib has aborted the tx operation as the packet doesn't have any particles to send), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INVENTORY_PARSER-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: an external API has failed in Inventory Parsing. The details are supplied with the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_9_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C_DRV-7-BUS_UNHANG_SUCCESS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The I2C bus hang has been cleared successfully. I2C communication is restored on the bus.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON_CLIENT-3-ERROR
### Response:
(Severity: 3), (Category: HA), (Description: A redcon client API failed in the indicated function, for the specified reason.), (Recommended Action: Collect the function name and traceback information and forward to your next level of technical support. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA_CAPI_SERVER-3-IOFPGA_ACCESS_CHK
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-6-GSP_CONN
### Response:
(Severity: 6), (Category: OS), (Description: A call to group_join() failed. There could be a problem connecting to underlying gsp server or transport between RP and LCs. If this is seen for a long time, there might be a real issue.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-4-PCI_BUS_WARNING_THRESHOLD_EXCEEDED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A device has been detecting a PCI bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-MULTICAST_INTACT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-ENQUEUEFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet Server failed to insert a client into client list queue. This will prevent the client from connecting to packet server.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_0_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_34
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_BMADJ-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM BMADJ, error information), (Recommended Action: Please collect the console log, bundle traces (show bundle trace loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_BAT_FAIL_B
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The CPT 50 Shelf Battery Failure B alarm occurs when battery B is down or not detected. This could be because the battery is removed or is not operational.), (Recommended Action: If the problem persists, call your technical support representative for fan tray repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPP_PKT_F3_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPP packet FIFO 3 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-APS_LOCK
### Response:
(Severity: 3), (Category: OS), (Description: APS MUTEX LOCK. It is applicable for Debugging of Mutex implementation for APS.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-MAKE_IDB
### Response:
(Severity: 3), (Category: L2), (Description: The mentioned idb in the argument, itself is NULL. That's why converting it to a regular/zombie idb can't be done.), (Recommended Action: It's an error check only. If found consistently, collect required_info and contact SUPPORT.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDM_TDM-7-TRANSLATION_FATAL
### Response:
(Severity: 7), (Category: HA), (Description: An error occurred during data translation. The process will restart without CDM data.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-UNKNOWNCORE_INFO
### Response:
(Severity: 4), (Category: OS), (Description: Debug core info), (Recommended Action: Information of the crashed process. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-PORT_SFP_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process failed to access the SFP plugged into the indicated port on the control plane ethernet switch. The indicated port will not function properly, and the impact of this failure will vary based on which port has failed. This failure could be due to a hardware failure or a software defect.), (Recommended Action: Reboot the affected hardware card to determine whether this is a transient failure. Also try plugging in another SFP to see whether the problem is specific to the SFP. Then collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-SATELLITE_COMPATIBILITY
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message reporting that a bundle has or had configuration present that could not be applied while it was a Satellite fabric uplink. The configuration would be ignored but the bundle would otherwise operate normally.), (Recommended Action: Ensure no configuration is present on the bundle that cannot be applied when acting as a Satellite fabric uplink.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_INR_VLAN_SES_LMT_NOT_REACHD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Inner VLAN on the given access interface iss no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_UCORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE uncorrectable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-LOW_IN_MEM_UCORR_ECC_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected multicast input memory uncorrectable ECC error on link 4), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-ERR_TX_ENQUEUE
### Response:
(Severity: 5), (Category: L2), (Description: An attempt to queue a received packet for processing failed. An occasional message of this type indicates that bundlemgr_local has temporarily been blocked from processing the queue leading to this harmless condition.), (Recommended Action: If this message appears more than once, the bundlemgr_local process should be restarted to try to recover the situation. An occasional message of this type will be harmless.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-6-ADJ_OOR_CLEAR
### Response:
(Severity: 6), (Category: ROUTING), (Description: AIB has got out of OOR condition for adjacency. Normal operation can be resumed. Please restart AIB producers if AIB entered OOR before, for example if the ADJ_OOR message is seen in syslog, in order to let producers to re-download adjacencies to AIB.), (Recommended Action: Use the following command to identify producer of adjacencies. <CmdBold>show adjacency producer detail location <node><NoCmdBold>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-7-RACK_OIR_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Not able to save configuration for this rack.), (Recommended Action: Since the configuration was not able to save, the configuration might have to be re applied when the DSC comes back up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-SHIP_PERF_EVL_MSG_FAIL
### Response:
(Severity: 7), (Category: SYSDB), (Description: Registering for sysdb_mc evl msg size stats failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-FLEX_ALGO_DISABLED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Flex-Algo defintion is inconsistent between routers in the area), (Recommended Action: Fix the Flex-Algo definition to be consistent on all routers in area.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-0-NIRVANA_FATAL_EVENT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The PRP FPGA Manager gets a fatal Nirvana FPGA event, and requests board reload.), (Recommended Action: Provide the required information to support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-6-INFO
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: An informational message.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_6_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-6-ERR_BAD_REPLY_ATTR
### Response:
(Severity: 6), (Category: SECURITY), (Description: The length of the reply attribute does not equal its parts.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Unable to bind to sysdb. The error is displyed in the error message.'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-GEN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error in CPU Control FPGA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ERRDIS-3-MISCONFIGURED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The owner library has received configuration that should have been rejected by the verification daemon. The owner has not acted on the invalid configuration, but the system is now in an inconsistent state.), (Recommended Action: This error message will be seen after a configuration commit including invalid error-disable configuration. Rollback the last configuration commit to return the system to a consistent state. Check the UDLD configuration guidelines for potential misunderstandings and, if necessary, consult your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-4-CERR_REGISTER
### Response:
(Severity: 4), (Category: SECURITY), (Description: radiusd failed to register error codes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INCOMPATIBLE_RP_FOR_CHASSIS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This RP type is not supported in this chassis type for the ASR9K family of chassis as it is incompatible to the chassis hardware architecture for traffic carrying purposes. Shelf manager raises this alarm when it detects the presence of the incompatible RP.), (Recommended Action: Please remove this RP from the chassis and replace it with another RP type which is supported in the chassis according to the Cisco user documentation. If you have questions, please contact your Cisco technical representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RUNA-2-ERR_RC
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Error in RUNA operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_LIB-3-ERR_LOCK_FATAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected fatal error occured when trying operate on a pthread lock.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Area Border Router (ABR) in OSPF?
### Response:
An Area Border Router (ABR) is a router that connects one or more OSPF areas to the backbone area (Area 0). ABRs are responsible for summarizing routes from within an area to the backbone, and for propagating routing information from the backbone to the other areas. ABRs maintain separate link-state databases for each area they are connected to.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-3-FXC_DUPLICATE_NORMALIZATION_TAG
### Response:
(Severity: 3), (Category: L2), (Description: For an EVPN VPWS flexible xconnect (FXC), the calculated Ethernet tag must be unique per EVI on a given interface (ESI). The Ethernet tag is derived from the interface encapsulation and rewrite tags.), (Recommended Action: Modify the encapsulation/rewrite tag for current interface so the calculated Ethernet tag is unique per EVI per interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-DRAM_INIT_FAILURE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The NP driver was unable to initalize DRAM. and must trigger a node bringdown to effect recovery.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_0_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias greater than or equal to the high laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MULTIVER-3-DLL_OPEN_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was a problem loading the DLL - perhaps the router has run out of memory, or there was a problem reading the file.), (Recommended Action: Check to make sure that one or more nodes is not having problems with memory. Copy the output of 'show dll pid <PID>' where PID is the process id of policy_repository process. Check all the install operations whether they are completed successfully Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_IPC-3-UNKNOWN_OPTION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates,the user has entered an unknown option .), (Recommended Action: Please collect the console log and CLI output.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-FPGA_PHY_SERCHANNEL_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Receive serdes signal issue detected/cleared between FPGA and PHY.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_NI_INTR_CRC_ERR2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_CRC_ERR2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GATM-2-ERR
### Response:
(Severity: 2), (Category: L2), (Description: Error in gatm operation. The error message can be related to any of the following: - Memory allocation - Data unavailability - AIB registration failure - Attribute modification failure - A minor method error - Duplicate attribute settting - NULL detection), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SITS_INIT-3-FAILED
### Response:
(Severity: 3), (Category: L3), (Description: The SITS process encountered the specified error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1-4-UPDOWN
### Response:
(Severity: 4), (Category: L2), (Description: The specified T1E1 is operationally down due to alarm. Check alarm status using show controller t1 command on the cli.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install update command in IOS XR?
### Response:
The 'install update' command is used to update the active software set to a newer version. It performs the necessary checks, activates the new packages, and commits them as persistent.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_RETRAIN_LINK
### Response:
(Severity: 5), (Category: PLATFORM), (Description: An ASIC error has occured and cause retrain link.), (Recommended Action: An error that causes retrain link has happened and been handled *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_AD-4-CLASHING_VE_ID_WITH_SELF
### Response:
(Severity: 4), (Category: L2), (Description: Local router has detected a clash in ve-id configuration from peer in L2VPN VPLS BGP auto-discovery deployment. This may result in PW not being established. So, if this warning message is observed, action should be taken as soon as possible. This message can only be seen in ve-id clash scenario.), (Recommended Action: Check local ve-id of bridge domain with the remote. On either local or remote router, recover can be done by Option 1: Change the ve-id to a unique one Option 2: Remove the bridge-domain and reconfigure a new bridge-domain with a unique ve-id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-TEJAS_GASPP_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in TEJAS GASPP register access. Cause of the error will be mentioned in the message displayed. This error means that communication between Services PLIM and MSC could be affected.), (Recommended Action: Do warm reload of the Services PLIM MSC. If the issue persists do a cold reboot of the same. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RIB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the BGP RIB thread. The process will be restarted if this error occurs during process startup.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_PROG_STATIC_PUNT
### Response:
(Severity: 3), (Category: OS), (Description: The system failed to program static punt table on the linecard.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-BAG_HDR_FAIL
### Response:
(Severity: 4), (Category: SYSDB), (Description: Error occured while reading bag header.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-SCH_0_HANG_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Scheduler 0 Hang on bridge instance-1.), (Recommended Action: Please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-PORT_INIT_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process failed to initialize the indicated port on the control plane ethernet switch. The indicated port will not function properly, and the impact of this failure will vary based on which port has failed. This failure could be due to a hardware failure or a software defect.), (Recommended Action: Reboot the affected hardware card to determine whether this is a transient failure. Then collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TX_RX_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a parity error for this device), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAOC768-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message from the PLAOC768 driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-STAT_INFO_HEX
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. ltrace init failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-NBR_NSR_DISABLED_STANDBY
### Response:
(Severity: 5), (Category: ROUTING), (Description: A BGP neighbor has NSR disabled on standby temporarily due to transport issues.), (Recommended Action: This informational message normally appears as routers and BGP neighbors go down on standby if NSR is enabled and neighbor goes down because of session flap or the replicated session on standby get torn down.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of using BGP cost community in IOS XR?
### Response:
BGP cost community in IOS XR is used to influence the best path selection process without modifying the BGP attributes. route-policy SET-COST
set extcommunity cost community-igp 100
end-policy
router bgp 65000
address-family ipv4 unicast
neighbor 203.0.113.1
route-policy SET-COST in
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPC-2-SW_ERR
### Response:
(Severity: 2), (Category: MGBL), (Description: Data plane software error occurs.), (Recommended Action: Check if the router reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LACP_LITE-3-ERR_UNSUPPORTED_FLAG
### Response:
(Severity: 3), (Category: L2), (Description: BM-Local has called LACP lite API with unsupported flag), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-REQUEST_RETRIEVE
### Response:
(Severity: 3), (Category: INSTALL), (Description: The request processor thread failed to obtain a request from the request queue.), (Recommended Action: Please check the operation requested and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_CHASSIS_CFG_CHANGED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with reloading the chassis.), (Recommended Action: System is inconsistent. Need to reload chassis for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-TABLE_PER_PREFIX_GLACIAL
### Response:
(Severity: 5), (Category: ROUTING), (Description: Error while enabling/disabling per route accounting in a table), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-VCCINT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Vccint out of range..), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-BAD_MESSAGE
### Response:
(Severity: 3), (Category: OS), (Description: An invalid message type was received from another node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_EVM_SYNC_ATTACH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Aggregator was unable to attach the indicated event handler to the event manager. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_VPLS-7-LTRACE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB VPLS component.), (Recommended Action: *NONE* Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR_DLL-3-HANDLE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Linecard has received an error signal but failed to handle/log the error properly. This may be from a program level error.), (Recommended Action: Contact support with the required information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-VLK_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PHY controller driver detected a parity error.), (Recommended Action: Please correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV4-3-TRACE_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card whee the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <ISM> show cef trace location <ISM> show cef platform services trace ipv4 all reverse location <ISM> show cef platform services trace common all reverse loc <ISM> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEDIASVR-6-DEVICE_FORMAT_REQUESTED
### Response:
(Severity: 6), (Category: MEDIA), (Description: The media storage card specified was requested to format with printed options.), (Recommended Action: Media storage data should be recovered from either active card or current primary mirroring device. If not redundant card or no mirroring then reinstall software and configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-4-OOR_LIMIT_REACHED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Maximum number of groups accepted, either per interface or per vrf.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-INIT_CONNECTION_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates DSC failed to connect the EDM event to sysDB. sysDB may have failures.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-RP_SHUTDOWN
### Response:
(Severity: 3), (Category: PLATFORM), (Description: RP is shutting down due to reason mentioned.), (Recommended Action: If there is a standby RP in the router, failover will automatically occur. Otherwise, chassis will be brought down and a manual reboot will be neccessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_BCDL_CONSUMER-3-ERR_BOARD_TYPE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID BCDL Consumer was unable to get the board type.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-CTX_NOT_FOUND
### Response:
(Severity: 7), (Category: LIBRARY), (Description: The replicator library was unable to access an internal structure. This may result in failure of data replication to the standby node(s).), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REBOOT_LIB-3-SDRNM_REBOOT_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: API sdr_nm_reload_vm() failed to reload the node(s).), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_RX_LOSS_WL_LOCK
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-EVENT_MESSAGE_ATTACH_ERR
### Response:
(Severity: 3), (Category: OS), (Description: event_message_attach() failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELMI-4-PROTOCOL_INVALID_PROTO_VER
### Response:
(Severity: 4), (Category: L2), (Description: The entire PDU was ignored due to an invalid protocol version being requested. This indicates that the last PDU sent by the peer device was not formatted correctly.), (Recommended Action: Check that E-LMI is configured on the peer device and that the link to the peer device is functionining correctly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-0-RP_RELOAD
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKSTAT-4-BUFFER_OVERFLOW
### Response:
(Severity: 4), (Category: SNMP), (Description: The bulk data file is too large for the configured buffer size for a single transfer interval. Data collection will continue in another new buffer of the configured size, and the collected buffer will be transferred to the configured destination.), (Recommended Action: Increase the maximum buffer size using the <CmdBold>buffer-size<NoCmdBold> size-of-buffer command, where size-of-buffer is the increased buffer size.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-FILE_OPEN_FAIL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the loadpath infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be opened, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP_AD-4-CLASHING_VE_ID_WITH_VPLS_PEER
### Response:
(Severity: 4), (Category: L2), (Description: Local router has detected that two peers are configured the same ve-id in L2VPN VPLS BGP auto-discovery deployment. This may result in PW not being established. So, if this warning message is observed, action should be taken as soon as possible. This message can only be seen in ve-id clash scenario.), (Recommended Action: Check the ve-id of bridge domain of the peers. On either one of the remote routers, recover can be done by Option 1: Change the ve-id to a unique one Option 2: Remove the bridge-domain and reconfigure a new bridge-domain with a unique ve-id.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-4-RECURSION_DEPTH_CHANGED
### Response:
(Severity: 4), (Category: ROUTING), (Description: The maximum recursion depth has changed. In order for the new value to take effect, the process has to be restarted. This warning is generated to remind the the customer to restart the RIB processes.), (Recommended Action: restart the RIB)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-EVM_CREATE
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when creating Event Manager.), (Recommended Action: Try restarting pifibm_server_lc and pifibm_server_rp processes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
libpcmcia_linux-7-CHILD_SPAWN
### Response:
(Severity: 7), (Category: PLATFORM), (Description: pcmciad spawns filesystem process and cardmgrd. One of them died and hence being restarted), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This may be a serious failure, however process may continue functioning as expected (or successfully retry) despite the failure.), (Recommended Action: Give CLI: If it is still getting operational failure, perform RSP switchover or card reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FTI-6-PEER_STATUS
### Response:
(Severity: 6), (Category: INFRA), (Description: Opflex peer status change), (Recommended Action: This message is for information purpose only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_EA-3-SSC_SEND_BATCH_END
### Response:
(Severity: 3), (Category: SERVICES), (Description: A problem was encountered while trying to send a batch of messages to the Service Director. The Service Director may not be up to date with the state of services on this node, so InterFlex interfaces located on this node may fail to forward packets.), (Recommended Action: It may help to restart the InterFlex EA process. If there are any obvious resource problems (e.g. memory exhaustion), these must be fixed first. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_HDR_CSM_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: FIA11 packet header checksum error.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MLIB_DEBUG-3-INIT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error. MLIB debug library initilization failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-AUTO_ABORT_TIMER_STARTED
### Response:
(Severity: 4), (Category: INSTALL), (Description: The auto-abort timer has started/resumed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-EXTRACT_FIELDS_FAILURE
### Response:
(Severity: 3), (Category: HA), (Description: Failed to extract the fields of relevant node id. i.e rack, slot, inst.), (Recommended Action: If any of these messages recur, call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-EVQ_DEQUEUE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unexpected error occurred while removing the specified object from the specified queue.), (Recommended Action: Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-5-NOTICE_RACK_NUM
### Response:
(Severity: 5), (Category: PLATFORM), (Description: ROMMON RACK_NUM variable set to 0.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF_UV-3-ERR_MEM_ALLOC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The ospf_uv process was unable to allocate memory for the specified resource.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: SPA OC48 driver error messages), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-3-BLOCKED
### Response:
(Severity: 3), (Category: OS), (Description: Process may have been blocking in library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-2-MEM
### Response:
(Severity: 2), (Category: MGBL), (Description: Failed to allocate dynamic memory.It could be happen on the route processor or on the asynchronous transfer mode(ATM) line card.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-4-RATE_LIMIT_WARNING_LOW_WATERMARK
### Response:
(Severity: 4), (Category: L2), (Description: BFD has released some of the previously allocated packet per second usage and is now at less than 85 percent of its allowance on this LC.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-6-BIOS_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: BIOS running on the indicated card is sending a info message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LINK_BAD_MODE
### Response:
(Severity: 3), (Category: OS), (Description: The mode data (MOG) for a link entry had an unexpected value. This could indicate a memory corruption problem.), (Recommended Action: Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-NO_SERVER_FOUND
### Response:
(Severity: 3), (Category: OS), (Description: Destination OBFL manager path is not found.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_DRIVER-6-BIST_CHECK
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCT_MA-3-ACCT_NOT_CONFIGURED
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: A policy-map containing prepaid and/or idle timeout commands must also contain a AAA accounting command. Without accounting configured, prepaid quota cannot be accounted for.), (Recommended Action: Define a policy-map that contains a AAA accounting command in addition to the prepaid or idle timeout command. If issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-PROC_PAGES
### Response:
(Severity: 7), (Category: OS), (Description: The total memory page number of dumper target process), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-7-LOG_DEBUG
### Response:
(Severity: 7), (Category: INFRA), (Description: please see show kim log for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-OUT_OF_SYNC_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: In the image, the specific constant definition is obsolete. Please change the corresponding definition.), (Recommended Action: Please collect the required information and raise a DDTS or a support case.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2VPN_FGID-6-INIT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the module in the platform L2VPN component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KENSHO_GL-6-PERFMON_NOTSUPP
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Processor Manager Linecard CPU driver doesn't support performance monitoring according to the specifications of the hardware.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-PKTDROP
### Response:
(Severity: 3), (Category: ROUTING), (Description: An input packet was dropped for the specified reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-CARD_DAT_FILE_PARSE_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed initialization with above reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_DEBUG_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric(inbar-crab) debugging initialization failure. This indicates PI debug infra failure. May not be related to PD.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-EVM_CREATE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr Event Manager create failed. This may be a program level error. The failure will cause the Procmgr process to restart.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_CONFIG_TO_TE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS was unable to inform the TE processes of its configuration or basic operational state.), (Recommended Action: Restart the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TSEC-3-OPERATION_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to the reason indicated by the error code. This is not a critical failure. The process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_UIDB-7-ERR_INIT
### Response:
(Severity: 7), (Category: L2), (Description: Initialization of uidb_svr process has failed due to one of the following reasons: 1) Failed to create server context. 2) Failed to get schedular parameters. 3) Failed to initialize event manager. This would prevent process from receiving events. 4) Failed to register with debug. This would prevent process from logging debug messages. 5) Failed to bind UIDB server with MIPC server. This is needed to program features in hardware. 6) Failed to connect to PLIM asic processes. This is needed to program features in hardware. 7) Failed to initialize checkpoint. This is needed to checkpoint UIDB data to restore on process restart. 8) Failed to allocate, initialize and checkpoint shadow memory. This is needed to store and restore UIDB internal data. 9) Failed to get metro asic version. 10) Failed to attach event handlers needed to handle LWM messages. This is needed to enable/disable various features in hardware. 11) Various Sysdb or EDM failures 12) event_block failed. This indicates process has encountered unexpected error while waiting for events.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-ERR_SRGB_RANGE
### Response:
(Severity: 3), (Category: ROUTING), (Description: LSD received a request for a SRGB range that has conflicting labels present. Configured SRGB cannot be allocated.), (Recommended Action: Reload the router and make sure you don't have overlapping label(s).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_ALIGN_FAIL_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_ALIGN_FAIL interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PYTHON-3-DISALLOWED_IMPORT
### Response:
(Severity: 3), (Category: OS), (Description: The process has been restarted because it has not published a dependency between itself and another module of code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_POGO-3-NULL_CONTEXT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: object context does not contain required parent/child context.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you troubleshoot configuration inconsistencies in IOS XR?
### Response:
To troubleshoot configuration inconsistencies in IOS XR, you can use commands like 'show configuration failed' to view any configuration that failed to apply, and 'show configuration inconsistency' to identify mismatches between the running configuration and SDR-specific configurations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-6-MGDTIMER
### Response:
(Severity: 6), (Category: ROUTING), (Description: An external managed timer support routine failed. The affect this error has on the proper operation of OSPF depends on where and when this error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_1_PKT_MINLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_12IN1-1-DTE_INVALID_CLOCKRATE
### Response:
(Severity: 1), (Category: L2), (Description: The detected DCE receive clock rate exceeds the range supported by the hardware for the installed cable type. This rate is defined by the peer DCE devices transmit clock rate. Max supported clock rates based on the cable type are: RS-530, RS-530A, RS-449, V.35: 8064000 bps X.21: 2016000 bps RS-232: 128000 bps Data errors, lost packets, and link state flaps may occur as a result.), (Recommended Action: Reduce the configured clock rate at the peer DCE device to fall within the range supported by the hardware based on the installed cable type.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-7-LOG_DEBUG_OWNER_PLANE
### Response:
(Severity: 7), (Category: OS), (Description: A debug owner plane message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA-3-DES_INIT_FAIL
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-7-UNEXPECTED
### Response:
(Severity: 7), (Category: HA), (Description: An unexpected condition was encountered in the RMF server. This is not necessarily an error.), (Recommended Action: If condition is reported multiple times, collect show redundancy trace location all, show redundancy, and show logging outputs and contact customer support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-INFO_HW_HEALTH_MON
### Response:
(Severity: 6), (Category: FABRIC), (Description: This message is seen when any of the previously reported health monitoring error condition is cleared.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
P40X0_DPAA-3-INIT_QMAN_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: P40X0 datapath failed to init the Queue Manager. This error could occur for two reasons. 1. The system is low on resources. 2. A hardware error or an error in the DPAA software.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect <CmdBold>show log location <r/s/i> <NoCmdBold> output, <CmdBold>show controllers dpaa trace all location <r/s/i><NoCmdBold> output and <CmdBold>show memory summary location <r/s/i> <NoCmdBold> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-PWR_ZONE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Power zone error on the card), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SD-3-LOOP_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: An unexpected error has been encountered in the main Service Director event loop. The Service Director will be automatically restarted, and should recover by itself.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKS_SRVR_ENGINE-3-ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: SKS server general error message with one prameter.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-2-DUPSYSTEM
### Response:
(Severity: 2), (Category: ROUTING), (Description: The router with the system ID SYSTEM-ID has transmitted too many LSPs in brief period of time, which could indicate constant LSP reflooding caused by a duplicate system ID.), (Recommended Action: Check the configuration of other routers in the area for duplicate system IDs.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFG_RESTORE-6-CONFIG_MIGRATION_SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: cXR to eXR converted config apply sucess while migration.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-INSTALL_SYS_ERR_FAILURE
### Response:
(Severity: 2), (Category: INSTALL), (Description: A system error occurred within the install system, possibly during an install operation, but the install code could not output information about the system error because an error occurred within the error output code.), (Recommended Action: Check system consistency using the admin command 'install verify'. Run 'install verify packages repair' if anomalies are found. If the problem persists collect diagnoistc information about the failure using the admin command 'show tech-support install file <file>' and pass it to your TAC representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_C_SHIM-3-SHWIN_OPEN_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Create/Attach to a shared memory window failed due to one of the following reasons 1. Invalid arguments passed to the function 2. Error occured while performing memory related operations), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-3-MIB_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error occured while trying to collect MIB data requested by the SNMP infrastructure. The data for which an error was encountered will not be presented in SNMP 'get' request results.), (Recommended Action: Such errors are not expected, and probably indicate an out-of-resource condition, or an inconsistency in the system state. Wait for any likely transient root problems to subside, and attempt to repeat the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option explicit feature?
### Response:
The MPLS TE path-option explicit feature allows the path for an MPLS TE tunnel to be explicitly specified using a configured path. An explicit path is a list of IP addresses or interface names that define the tunnel's route. Explicit path-options override dynamic path calculation and provide exact control over the tunnel's path.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-3-ERR_INVALID_RA_INTERVAL
### Response:
(Severity: 3), (Category: IP), (Description: The permitted range for the maximum Router Advertisement (RA) interval is from 4 seconds to 1800 seconds. The permitted range for the minimum RA interval is from 3 seconds to 0.75 times the maximum RA interval.), (Recommended Action: Configure minimum and maximum RA interval within the permitted range.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_EA-6-ERR_IMC_MULTIPLE_NTFCNS
### Response:
(Severity: 6), (Category: L2), (Description: A batch from IM contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the cHDLC EA. No problems should be seen as a result.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_PROTECTED_FABRIC-4-MGID_ACL_REMOVED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: ACL used by the optimized-fabric-multicast feature has been unconfigured without removing the optimized-fabric-multicast configration, this can cause unexpected system behaviour.), (Recommended Action: Remove the 'hw-module optimized-fabric-multicast...' configuration or replace the ACL in the 'hw-module optimized-fabric-multicast...' configuration with another ACL.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-PDU_INSUFFICIENT_SPACE
### Response:
(Severity: 3), (Category: ROUTING), (Description: The IS-IS process was unable to add information to an outgoing PDU. This is most likely an MTU issue.), (Recommended Action: Check the MTUs for the interfaces over which IS-IS is running.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_4P_OC192-3-GENERIC_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A generic error is occurred in plim_4p_oc192 PLIM driver. Cause of the error will be mentioned in the message displayed. This message is for debugging purposes.), (Recommended Action: This message indicates that the driver has encountered an error. Please collect the output for the CLI mentioned in the required_info immediately before the ltrace buffer wraps.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'allocate global' sub-command under 'mpls label range'?
### Response:
The 'allocate global' sub-command is used to allocate labels from the global label pool. By default, IOS XR uses per-interface label space. The 'allocate global' command switches the label allocation to use the global label space, which is required for some MPLS applications such as L3VPN and MPLS TE.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-SMART_LICENSE_DISABLED
### Response:
(Severity: 2), (Category: LICENSE), (Description: Smart Licensing must be enabled for the feature licensing management.), (Recommended Action: The customer is required to enable Smart Licensing and register device with Cisco Cloud to comply with Cisco Software Right To Use Agreement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MGID_OOR-4-MGID_COUNT_OOR_RED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Total number of allocated MGIDs has reached system capacity. No more MGID allocations will be allowed until some MGIDs have been freed so that the total allocation falls below the critical threshold.), (Recommended Action: Reduce multicast route scale)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PUNT-2-REG_ACCESS_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Register access failure on Punt FPGA.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. Please verify that the FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-IFH_RECYCLE_CLEANUP_EXT_FAIL
### Response:
(Severity: 2), (Category: ROUTING), (Description: FIB failed to cleanup an IDB on detecting interface handle recycle to a new interface. Some of the routes may be in incorrect state and may affect traffic forwarding for those routes. There is no self recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_2
### Response:
(Severity: 3), (Category: IP), (Description: The LMA cannot determine the tunnel encapsulation type for this binding.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PP_CNSMR-3-RSI_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: PPInfo consumer didn't receive EOD(End Of Download) notification from RSI agent. %d - Indicates the AFI for which EOD notification is not received.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMGBL-2-CRIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: An unexpected critical error condition encountered.), (Recommended Action: Collect system log information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCMGR-3-MEM_ALLOC_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr encountered a memory allocation error.), (Recommended Action: The Procmgr process will automatically respawn up to a fixed number of times. Verify the process is running: 'show process procmgr location <>' If it is still not spawned contact support with the required info. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-6-MAL_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Info about media access lib, used to communicate with linux ethernet device driver. %s- Message description.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM_EA-3-DATABASE_KEY_MISSING
### Response:
(Severity: 3), (Category: L2), (Description: The FR VCM EA process code/data is inconsistent. Possible coding error or data corruption.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RTC-7-CAL_CHIP_READ_CMOS
### Response:
(Severity: 7), (Category: MGBL), (Description: Reading value of NMI enabled flag from CMOS.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR fast tunnel interface down detection feature?
### Response:
The MPLS TE FRR fast tunnel interface down detection feature provides a fast mechanism to detect the loss of the physical interface that is carrying TE backup tunnels. It uses hardware-based event detectors to quickly trigger FRR switching to an alternate backup tunnel or the release of protected resources. This minimizes traffic loss from failures of backup interfaces.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-3-ERR_PAK_FSV_REGISTRATION
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Internal Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE passive interface feature?
### Response:
The MPLS TE passive interface feature allows an interface to be excluded from the MPLS TE topology database, while still allowing MPLS TE LSPs to be established over that interface. Passive interfaces are not considered during CSPF path calculation. This is useful for interfaces that are not under the control of TE or that have limited bandwidth.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-WRONG_PLANE
### Response:
(Severity: 7), (Category: SYSDB), (Description: An application has tried to access a plane of SysDB data that does not exist on this node.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-MPLS_SROPT_CRIT_FAIL_LABELLED
### Response:
(Severity: 2), (Category: ROUTING), (Description: During create/update, SR-OPT criteria has failed to be met. All paths dont have the same label. Please check your config. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_THREAD_MUTEX_LOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to pthread_mutex_lock() was unsuccessful'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
sse_qosrm-3-LOCK_NOT_RECOVERABLE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Failed to make the mutex in consistent state results in not recoverable state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ROLL_BACK_FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: After the install/ISSU operation is aborted, during roll-back the card group fails to revert back to previous image.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-3-INVALID_PORT_ERR
### Response:
(Severity: 3), (Category: L2), (Description: The PLIM process failed to spawn due to an internal software problem during the initialization process. The process will automatically respawn up to a fixed number of times to try and recover. The PLIM process is the driver for all PLIM hardware devices. %d - indicates the port number), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error is normally associated with larger system issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-INVALID_BCDL_REGISTRATION
### Response:
(Severity: 3), (Category: ROUTING), (Description: Invalid BCDL registration detected.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlea-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN EA process failed to initialize. The process will automatically restart and retry. Until it succeeds, VLAN functionality may not work on the affected node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-SYSDB_BIND_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process was unable to initialize the path mentioned in the message.This is not funtionality impacting,system will continue to funtion.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-ECMP_GROUP_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: Adding ECMP failed due to ECMP groups/paths OOR .), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA_PLUGIN-3-BAG_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Some error occured with a bag operation. The text of the message displays the failed operation with error code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PROCFIND-7-EVENT_MGR
### Response:
(Severity: 7), (Category: OS), (Description: Procfind was unable to create an event manager for receiving messages, and therefore failed to initialize.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-ERRMSG_HIST_FULL
### Response:
(Severity: 7), (Category: OS), (Description: Syslog historical file reached the limit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPPIMDLL-3-PIM_LIB_SYSDB
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred during sysdb operation between pim and sysdb.), (Recommended Action: This indicates a problem with sysdb. Do the following action. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show pim trace sysdb error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show pim trace sysdb error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the error is seen only once/twice while some sysdb processes crashed or were restarted, this might be related to that and could be considered transitory. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of NetFlow in Cisco IOS XR?
### Response:
NetFlow in Cisco IOS XR is used for traffic analysis by collecting IP traffic information, enabling network planning, monitoring, and security analysis.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-4-ERR_PACKET_INPUT
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: This message indicates that the ARP packet queue is filling up faster than ARP can process the packets. It could be due to many addresses needing to be resolved on initial bring up. In this case packet drops are not a problem. Addresses will resolved as quick as possible and the condition will clear. If seen for a while then could imply some potential problem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB-7-DEBUG_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-NOT_SINGLE_PIE_ATTRIBUTE
### Response:
(Severity: 7), (Category: INSTALL), (Description: PIE file appears to be damaged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-2-NODE_RELOAD
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Message indicating that the node has received a reload notification and the node is going to reload soon.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-7-BIOS_DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: BIOS running on the indicated card is sending a debug message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-PM_CONTROL_CB_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: SFE driver has changed from active to standby.Exiting), (Recommended Action: The driver will restart and try to recover. Make sure the driver restarts and recovers. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SESVI_EA-3-OPERATION_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: The message indicates the failure in opening or creating the shared memory.), (Recommended Action: - Show logging - show services secontroller trace reverse location <ISM>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_6_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_POD_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric Driver failed to initialize one of the POD hardware modules. The System Manager process (sysmgr) will automatically respawn the (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIRD-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_TF_INTR_FIFO_0HI_EXT_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_TF_INTR_FIFO_0HI_EXT_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSI_AGENT-3-INVALID_CLIENT_TDL_INPUT
### Response:
(Severity: 3), (Category: OS), (Description: Client has passed a wrong table as a dependency. No action is being taken. This is likely caused by a race condition in the code.), (Recommended Action: Collect 'show tech-support rsi' and running core-dump of rsi_agent and the client mentioned in the error message. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
S2681-3-INTERRUPT_UNMASK_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The S2681 UART driver has been unable to unmask the UART interrupt.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-3-COULD_NOT_AUTHENTICATE_HW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: MPA manager has failed to authenticate for Cisco HW genuine check This could happen in 2 cases - Secured MPA IDPROM read failed and authentication is not possible - There ACT2 Chip Acess(bus access problem) or Secured Certificate Errors), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-ERR_MSGQ_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: NPU driver failed to create a message queue used for inter-thread communication during the driver initialization.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-NSR_SYNC_START
### Response:
(Severity: 5), (Category: ROUTING), (Description: LDP Non-stop routing initial-sync event has been started for all eligible peers.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-ING_L4_ARRAY_OFLOW_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: L4 array overflow on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT_SHOW-7-TRACE_FIND
### Response:
(Severity: 7), (Category: OS), (Description: The show decode helper library isolates string and trace data to a given trace name and node. The attempt to find this in the lookup tree failed for the above reason. Any trace using this string may not be printable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_AMCC2035-3-IF_OPERATION_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-3-CAPS_INFO_ADD
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS MA process encountered the specified error while trying to add the caps.), (Recommended Action: Contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-ASSERT_CTX_RL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal consistency check failed. Dumping runtime context for executing thread. There may be no immediate impact on traffic, but this issue should be addressed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_LQ_SEQ_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue sequence error on XAUI 1 LQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-4-SYSMGR_API_FAILURE
### Response:
(Severity: 4), (Category: OS), (Description: An error happened for a sysmgr API.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-INSUFFICIENT_RACK_POWER
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that power allotted to cards in this rack has exceeded the available rack power budget.), (Recommended Action: Please check the 'show power' command to resolve this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This error indicates a problem with the software on programming the hardware. This typically occurs when there is a problem with the resource utilization in the card where the error is seen. Here is a list of possible reasons for this message. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Resource limitations. This condition indicates a problem where the software has limited resources to operate on.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef show memory summary </RP> <LC> show cef location <> show memory location <> show cef trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-IM_MSG_FAILED_RETRYING
### Response:
(Severity: 4), (Category: L2), (Description: The SPAN MA was not able to send a message to update monitor-session configuration for a set of source interfaces. It is possible that traffic will not be replicated correctly at the affected source interfaces. Standard forwarding will not be affected. Use 'show monitor-session status' to identify the set of affected interfaces and to provide more information about their current state.), (Recommended Action: This message may indicate a communication problem, or a problem with programming the hardware. Attempt to resolve any memory issues before attempting to solve the problem. SPAN MA will continue to retry the operation, but further investigation may be needed to identify and resolve the underlying problem before the programming succeeds. For example, if the error message indicates that there was a problem programming the hardware then issue 'process restart span_ea' on the node with the affected interfaces. If using a tunnel destination, check that the destination is reachable. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_PRODUCER_LIB-3-SEND_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: --), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-USING_MSGDGST
### Response:
(Severity: 6), (Category: ROUTING), (Description: Inform user that when both a clear text password and message-digest key are configured the message-digest key will be used.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-PEX_PARITY
### Response:
(Severity: 0), (Category: PLATFORM), (Description: A parity error interrupt at data phase of the PEX WR transaction), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_9_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the package manager process in IOS XR?
### Response:
The package manager process is responsible for managing the installation and removal of software packages on the router. It works closely with the instdir process during installation operations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-GROUP_COMPONENT_IGNORE
### Response:
(Severity: 4), (Category: ROUTING), (Description: The rpl multi-version coordinator received a group services message from a component other than itself. The message was ignored and thus the operations of the coordinator are unaffected. However, this can be a sign that something else is going wrong in the system.), (Recommended Action: Observe system for other failures & contact support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-MACSEC_SHUTDOWN_DISABLED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the placed process in IOS XR?
### Response:
The placed process is responsible for managing the process placement feature in IOS XR. It determines which processes should run on the RP and which ones should be offloaded to the DRP.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_MGR-3-CM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FGID manager failed CM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_HA_ACK
### Response:
(Severity: 4), (Category: L2), (Description: After servicing a request from the QFP high availability server, the acknowledgement of the request failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_REPROG_RESOURCE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and need to reprogram resource.), (Recommended Action: An error that causes reprogram resource has happened and been handled Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-PEC_SHUTDOWN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The inserted expansion card is shutdown.), (Recommended Action: PEC card is shutdown success.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCE-3-lsp_update_lsp_absent
### Response:
(Severity: 3), (Category: OS), (Description: Unable to update LSP due to absense of LSP), (Recommended Action: Check LSP name specified in EXEC CLI)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-VCCAUX_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Vccaux out of range..), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-LICENSE_FILE_PROBLEM
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license manager encountered an error attempting to install or remove the licenses in the given license file. Check the error string to determine what has happened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-SYNC_RELEASE_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: When the single writer mode is set, RDS library allowes to create a ticket. Ticket request timed out.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Null Driver partner encountered a error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SOCKET-2-ASYNC_SHMWIN_RECOVER_FAILED
### Response:
(Severity: 2), (Category: IP), (Description: The socket library has encountered an error while using one of the shmwin API for ASYNC sockets. This indicates that there is in-consistency in the shmwin window and it is no more in usable state.), (Recommended Action: The information in required_info to be collected. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PARSER-3-EXTRACT_NODEID_FIELDS_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: Parser unable to get rack/slot/module field from path.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE-3-NEW_UDI_GENERATED
### Response:
(Severity: 3), (Category: LICENSE), (Description: The end user has forced the generation of a new UDI for licensing purposes via the 'license request new-udi' admin command. When requesting licenses, this virtual machine will now be treated as a separate instance from any virtual machine instance utilizing the old UDI.), (Recommended Action: This message is informational.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHANCON-3-INVALID_CHAN_ID
### Response:
(Severity: 3), (Category: OS), (Description: Connector poll returns error.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-SVC_EOF_UNEXPECTED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information. %s - is the file name in question.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SDR_MGBL_PROXY-6-MODULE_DONE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Used by CTC : indicated that inventory data is populated), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-PROC_READY
### Response:
(Severity: 3), (Category: OS), (Description: System manager process in not ready.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_SOFT_PREEMPT_TIMEOUT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface, with the specified LSP Id, was attempting a soft \ preemption but timed out and was torn down.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_12_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power warning threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-AAA_INVALID_TASKID
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Found invalid/corrupted AAA data'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-NT_SWO_SUCCESS
### Response:
(Severity: 6), (Category: INFRA), (Description: ESD has detected that its peer running on a adjacent SC slot is unresponsive. The peer ESD process on the adjacent slot is currently managing a switch card, which is monitored by this ESD instance. As a result, this instance of ESD triggered a PCIe NT switchover to take control of the Switch Card and the operation was successful.), (Recommended Action: Check if the ESD instance on the peer SC card has exited or crashed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-6-NO_POWER_XFP
### Response:
(Severity: 6), (Category: L2), (Description: There is not enough available power on the PLIM to power on the XFP.), (Recommended Action: Remove the XFP from the given port.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ADJ_CREATE_RETRY
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error: Cannot create the adjacency for a particular interface. Will retry for few times), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLINUX-3-SERIAL_INTERFACE_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: General error message for the linux serial interface.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-VOLTAGE_NOT_VALIDATED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Voltage validation failed and the client is requesting us to shutdown the card.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN EVPN route target?
### Response:
To configure an L2VPN EVPN route target, use the 'route-target' command within the EVPN instance configuration. l2vpn evpn
route-target both 100:100
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-TIMER_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Timer timed out from hbagent server or MBI server.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC5
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-ERR_RIB_BATCH_SEND
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS encountered an unexpected error whilst sending a batch of RIB updates to the RIB. This may be a resource starvation problem, or a problem with IS-IS's connection to the RIB, or an internal programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-LIB_DB_ENTRY_ADD_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed to add entry for the specified prefix into the Label Information Base.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-COMMITTRANS
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-3-CONNECT_TO_L2VPN
### Response:
(Severity: 3), (Category: L2), (Description: FR VCM process on linecard tried to connect to L2VPN server on RP. Connect registration failed. FR L2 sub-interfaces will not be operational on this linecard.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-7-SAM_CERTIFICATE_EXPIRED
### Response:
(Severity: 7), (Category: INSTALL), (Description: The SAM certificate expired. This error could also be because the system date is set to a very old data. Check the system data.), (Recommended Action: Please check the system date and take required corrective actions.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FAIL_STAT
### Response:
(Severity: 4), (Category: INSTALL), (Description: The Install Helper failed to stat a file.), (Recommended Action: This error occured while copying an MBI file from RP to the DRP disk. This error will be recovered automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-PHY_ACCESS
### Response:
(Severity: 4), (Category: L2), (Description: Software could not access the PHY device during port initialization.), (Recommended Action: None. Software corrected the issue by power cycling the PHY device and the PLIM FPGA.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-3-LINK_DELETE_FAILURE_INUM
### Response:
(Severity: 3), (Category: OS), (Description: A link could not be deleted from the links database. This could indicate either a code problem or a memory corruption problem.), (Recommended Action: Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TASKMAP_GET
### Response:
(Severity: 3), (Category: MGBL), (Description: When exec is launched by certain clients like ssh/Fault-manager the authentication is bypassed. It is because authentication is done by clients already. In this case exec needs to obtain the user's taskmap though. This is done by calling suitable AAA apis. If one of the apis fails, then this ios msg is emitted.), (Recommended Action: Close the exec session and relogin. If the message recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_PROC_AVAILABLE
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed on a call to system manager to indicate that it has completed all its initialization and is now completely online. It's an internal software fatal error. IS-IS process will abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Initialisation of trace functionality for mirror failed. This would affect the debugging of mirror.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-SET_PROCESS_GROUP
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to set the specified device as the controlling terminal for the process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-READ_WRITE_FAILURE
### Response:
(Severity: 3), (Category: DRIVER), (Description: Retries exhausted and Register read/write failed in CCC Driver. This is an indication that HW may not be in stable condition.), (Recommended Action: Need to collect show-tech ctrace and follow up with CCC driver team)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-1-ALERT
### Response:
(Severity: 1), (Category: OS), (Description: Immediate action needed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-1-CERT_EXPIRING_ALERT
### Response:
(Severity: 1), (Category: SECURITY), (Description: Cerficate is expiring within the specified time, in an hour, or a day. Immediate action is required.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-ACL_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: This error occurs when the following configurations are attempted: 1. Modifying ACEs or Adding new ACEs to an existing ACL that has been configured via 'hw-module route-stats l3mcast ...' CLI command. 2. Changing the ACL (example: VRF change) that has been configured via 'hw-module route-stats l3mcast ...' CLI command.), (Recommended Action: 1. Workaround: a. Uninstall the ACL with 'no hw-module route-stats [<vrf>] l3mcast ... <ACL-NAME>' and commit. b. Perform changes to the ACL that failed and commit. c. Reinstall the ACL with 'hw-module route-stats l3mcast ... <ACL-NAME>' and commit. 2. Workaround: a. Uninstall the ACL with 'no hw-module route-stats [<vrf>] l3mcast ... <ACL-NAME>' and commit. b. Perform changes to the ACL that failed and commit. c. Install the ACL with 'hw-module route-stats [<vrf>] l3mcast ... <ACL-NAME>' and commit.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACTION_IN_ACL_NOT_SUPPORTED_QOS_PEER
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The following actions in an ACL are not supported in the direction specified when QoS Peering Mode is enabled via the hw-module command: set-ttl), (Recommended Action: remove the set-ttl action or disable QoS Peering Mode)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_MA-3-INCORRECT_COUNT
### Response:
(Severity: 3), (Category: L2), (Description: During checkpoint delete or idb cleanup, a rare case when the count is zero and an attempt is made to decrement it.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMP-3-SVI_TUNNEL_TYPE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: SVI has already tunnel with type different from the one that is trying to be established. Single sa tunnel can't be on the same svi as regular tunnel. first tunnel type determines the SVI type), (Recommended Action: verify all client are from same type)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-6-PLA_INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message. Please check the description. This message is added for debugging purpose only.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE_ERR_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE_ERR_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_IN_MEM_CORR_ECC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast input memory correctable ECC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_MEM
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BQS_LIB-3-MUTEX_DESTROY_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to create the mutex.), (Recommended Action: Restart the process to recover from the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_LB-6-SESSION_STARTED
### Response:
(Severity: 6), (Category: L2), (Description: A loopback session has successfully started. This is for informational purposes only.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GDOI-2-SVC_CRIT
### Response:
(Severity: 2), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-5-HA_NOTICE_START
### Response:
(Severity: 5), (Category: ROUTING), (Description: First log upon process startup.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_ALLOC-3-ERR_GSP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Allocator encountered the annunciated GSP error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_0_RX_ALIGN_LOSS_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Rx alignment loss on XAUI to NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-4-UNKNOWN_EXCHANGE_TYPE
### Response:
(Severity: 4), (Category: SECURITY), (Description: IKE performs actions on messages based on defined exchanges. A message received with an unknown exchange.), (Recommended Action: 'If the problem appears to be more than a transient one, contact the peer's administrator.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-CORE_COPY_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed to copy core file to specified path.), (Recommended Action: Check connectivity, storage and dumper process; collect show context and console message. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_EA-3-INIT_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Initialization process such as getting an evm failed.), (Recommended Action: sysmgr will retry to start the ipv6_ea. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTH_SRV-3-ERR_2SD_PARAM
### Response:
(Severity: 3), (Category: SECURITY), (Description: auth srv exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-OP_HISTORY_NOT_FOUND
### Response:
(Severity: 3), (Category: INFRA), (Description: The file containing operation history data for this operation could not be found. Operational data requests will not return the full set of information. This does not indicate any issue with the install operation itself.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WDMON_LIB-3-CCC_WATCHDOG_PUNCH_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: Error occurred in HW watchdog punching logic due to which watchdog punching has stalled. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPD_UPD-3-BAD_FPGA_IMAGE
### Response:
(Severity: 3), (Category: INFRA), (Description: The indicated image in SPI flash does not appear to have a valid meta-data. This means that a previous FPD upgrade operation did not finish the programming operation of the image.), (Recommended Action: Run again the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-5-UNABLE_TO_FIND_EUSB_PARTITION
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Check for partitions and mount Satori internal eUSB. Check if eUSB device is there with partitions. If it unable to find EUSB partitions then this message will get printed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-INV_FAULT_SEVERITY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detects an invalid fault severity defined in the Application Fault Condition Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-NOT_LMA_FOR_THIS_MOBILE_NODE_2
### Response:
(Severity: 3), (Category: IP), (Description: Network is not configure in the profile of the MN whose NAI is printed in the error message.), (Recommended Action: Configure network in the MN profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-5-LTRACE_INIT
### Response:
(Severity: 5), (Category: OS), (Description: Failed to initialize dumper ltrace buffer), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-INIT_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-6-INTERFACE_EA_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-CHKPT_RECORD_BAD_LENGTH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The reason should be supplied in the IOS msg itself, but basically this messge means that shelfmgr received bad length during standby HA check Point update.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ-3-INTERFACE_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: Interface creation failed due to egressq port creation failure. Can't map Interface handle to egressq port, it could be because of: Invalid interface handle passed.), (Recommended Action: No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-2-ROOT_DEVICE_BUS_CRITICAL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A PCIe bus error has occurred. The message has the root device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MIN_LEN_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error FIA 00 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VPDN-3-MGR_EVM
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: The event processing infra has returned a fatal error.), (Recommended Action: Allow VPDN Manager to restart. If the problem persists, contact Cisco support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SCI_CRAM_SBE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND_LITE-3-SHMEM_MMAP_FAIL
### Response:
(Severity: 3), (Category: L3), (Description: A failure has occured in mapping a shared memory region required for communication between the IPv6 Neighbor Discovery (ND) process (ipv6_nd) and the ND spoofing process (ipv6nd_lite). This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart.), (Recommended Action: Check that the ipv6nd_lite process is running and restart it if necessary. Look for other error messages that may help explain the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-TEST_NOT_SUPPORT
### Response:
(Severity: 4), (Category: DIAG), (Description: The diagnostic test is not supported on current chassis configuration.), (Recommended Action: This message does not indicate any problem with the system. The test cannot be run because it is not supported on this chassis configuration. No further action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HOSTNAME_SYNC-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Error during initialization of hostname_sync daemon.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-1-FABRIC_UPDOWN
### Response:
(Severity: 1), (Category: FABRIC), (Description: If the fabric is reported down, it means that none of the fabric planes are UP. If the fabric is not UP, system cannot be used for any data traffic.), (Recommended Action: Ensure that fabric cards are installed in the system. For multichassis systems ensure that the fabric racks have booted and the fabric cables are installed. Fabric can come up late if the fabric rack or fabric cards are booted up late. Wait for more time to see if the fabric comes UP. For MC systems, check if plane admin config exists on the router. If not, configure the plane admin config. If condition persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-ISO_INSTALL_EXIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-GET_DH_ENTRY
### Response:
(Severity: 7), (Category: OS), (Description: Could find datahandle entry in the vector for replica The datahandle might have not been added or may have been deleted.), (Recommended Action: This is a Debug message.No action required. If the problem persists,Contact Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBINST_DEBUG-4-MUTEX
### Response:
(Severity: 4), (Category: INSTALL), (Description: The process failed to obtain a mutex lock/unlock.), (Recommended Action: The debug infrastructure was unable to acquire/release the lock. This only impacts debugging commands and has no impact on the functionality of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UTIL-3-NOINIT
### Response:
(Severity: 3), (Category: SNMP), (Description: The SNMP Utilities library was not properly initialized by the SNMP agent. This is an internal software error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_OUTPUT-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: IP), (Description: The FHRP output process was unable to obtain an event connection manager. FHRP Output process client functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_CPUCTRL-2-NO_FAB_ACT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected no active fabric in the system.), (Recommended Action: If there are no RSPs present or if both RSPs are undergoing a reload, then this is an expected message. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-PAK_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: An error occurred unexpectedly while calling the packet management infrastructure to handle a CFM packet during packet send.), (Recommended Action: The 'cfmd' process will restart after this error is seen. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NRSUTILS-3-INTERNAL
### Response:
(Severity: 3), (Category: OS), (Description: The client library has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-PORT_OVERTEMP_DISABLE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port is disabled if the port temparture is over the critical threshold for more than 24hrs. And re-enabled if, the temperature drops.), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, call your technical support representative for repair or replacement.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-UNKCMD
### Response:
(Severity: 7), (Category: MGBL), (Description: The first token in a command string was not a recognised XML schema browser command.), (Recommended Action: Check the list of available commands and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-TEMP_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected temperature fault), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-API_ERROR
### Response:
(Severity: 3), (Category: HA), (Description: API returned error .), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPHC_MA-4-EVC_INIT
### Response:
(Severity: 4), (Category: L3), (Description: After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-0-ISSU_STDBY_CON_AVAILABLE
### Response:
(Severity: 0), (Category: MGBL), (Description: 'Standby Console available during ISSU Load Exec and Load Done Phase'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-3-TIMER_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ALARMS-6-CLEAR
### Response:
(Severity: 6), (Category: MGBL), (Description: Some (or all) of the alarms in the alarm buffer have been deleted as a consequence of an action initiated by the user. This message does not require any action. It informs that a clear logging event delete command or an alarm buffer resize operation (or equivalent operation through another management interface) was executed.), (Recommended Action: No action is required to be taken by the user as this is just an informational message envoked clear logging event <> command by the user only)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB_API-3-RPC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: 'An RPC-related error occurred in an RPC call from the MRIB API'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How is BGP Graceful Restart configured in IOS XR?
### Response:
BGP Graceful Restart is configured using the 'bgp graceful-restart' command in router BGP configuration mode. Additional options can be configured such as the restart time, stalepath time, and so on. Graceful Restart must be configured on all participating BGP speakers.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HPISSE-7-DEBUG_STATUS
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-API_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Client to the SPA THOR jacket process had a communications failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-3-ACP_VRF_GLOBAL_CREATE_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: 'Autonomic network VRF has not been created globally'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-ERR_LTRACE_INIT
### Response:
(Severity: 3), (Category: L2), (Description: Process encountered an error during software initialization. ltrace initialization is failed. So we will not get any traces using ltrace cli. It may fail very rarely. It will work most of the time. we added this message only for debugging purpose.), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error is normally associated with larger system issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-4-CANT_FIND_DSC
### Response:
(Severity: 4), (Category: HA), (Description: LRdlib could not find the dSC.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD_LIB-3-INIT_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during RCMD library intialization, causing the process to restart.), (Recommended Action: Report to Technical Support. Not a fatal error if seen one time, but frequent occurrences can impact routing features.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CETHHA-4-NOGE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: RP does not have GE connectivity. Reload/failovers may cause problems.), (Recommended Action: Check the GE connections on the front panel of the RP/SC and re-connect/replace to make sure atleast one GE connection is there.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_WRITE
### Response:
(Severity: 3), (Category: OS), (Description: TCAM ods write error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_PRS
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from PRS. Traceable condition occurs when the SSM transmission level is changed to Stratum 1 Traceable.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-LOCK_NOTFOUND
### Response:
(Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code. The lock list was corrupted.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-HI_FPOE_DB_UCORR_ECC_ERROR_LNK1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE uncorrectable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_ENVMON-2-SAT_TEMPERATURE_ALM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when a high temperature alarm occurs on satellite.), (Recommended Action: Contact engineering with output of cli: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(RP)# admin show temperature | b SAT<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(RP)# admin show temperature | b SAT<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FM-2-INFRA_FAIL
### Response:
(Severity: 2), (Category: PKT_INFRA), (Description: There was a IOS-XR infra call failure while attempting to provide some infrastructure service. These typically could be some IPC services or debug infrastructure, etc.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-3-CALLBACK_WRONG_THREAD
### Response:
(Severity: 3), (Category: OS), (Description: A callback from the IOX-XR infrastructure was not handled by the XTC process because it was received in the wrong thread. The XTC process may now be in an inconsistent state with the rest of the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The xtc_agent process may be restarted in order to recover from this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_7
### Response:
(Severity: 3), (Category: IP), (Description: The Re-registration PBU should not contain All-Zero HoA option.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-STBY_CONN_RETRY
### Response:
(Severity: 4), (Category: HA), (Description: Redcon failed to establish a connection to redcon on the standby card.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-OPTICS_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The G.709 feature is configured without the necessary license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ETHER-3-SW_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A software error is detected on PLIM.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ERR_RCV_PAKTYPE_NOT_LAN
### Response:
(Severity: 6), (Category: ROUTING), (Description: The packet is invalid because it is a P2P packet received on a LAN interface. The packet has been ignored.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-7-GROUP_RESPONSE_UNEXPECTED
### Response:
(Severity: 7), (Category: ROUTING), (Description: The rpl multi-version coordinator received a message response instead of a request. This has been ignored and it is likely no other problems will result from this.), (Recommended Action: Observe system for other failures contact support team.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_6_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel primary affinity feature?
### Response:
The MPLS TE auto-tunnel primary affinity feature allows auto-tunnel primary tunnels to select or avoid links for the primary path based on configured affinity attributes. This provides more control over the primary path selection compared to the default behavior of using the TE metric. Affinities allow primary paths to be optimized for specific requirements.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-4-SEQUENTIAL_POOL_DELETE
### Response:
(Severity: 4), (Category: SERVICES), (Description: SEQUENTIAL PRIVATE POOL IS NEEDED FOR SEQ NAT WORKING.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-6-PS_SHUTDOWN_ERROR
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Indicates that a non Cisco compliant power supply was detected. The attemp to shutdown this power supply has failed for number of tries.), (Recommended Action: Insert Cisco power supply)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_HAL-3-INVALID_SUBSCRIBER_NEXTHOP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The platform dependent, PD, FIB software received an invalid subscriber route whose nextHop indicates a TE tunnel or an IP tunnel. This is invalid network topology for subscriber deployment. Please check the router configuration and network topology for subscriber routes, like default route configuration and subscriber routes re-distribution.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MCASTSN_POLICY-3-ORA_ORABUILD
### Response:
(Severity: 3), (Category: L2), (Description: There was an internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error verbose<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error verbose<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-XR_ACTIVE_PKGS_MISSING_IN_REPO
### Response:
(Severity: 3), (Category: INFRA), (Description: One or more active XR packages are not found in repository. When a node goes through internal pxe or a new card is inserted, XR will fail to come up on that node as packages in active software profile is missing and XR prepare will fail.), (Recommended Action: Install add the packages that are mentioned to be not found in the XR repository and please reload all the node(s) on which XR failed to come up, reload the node after install add is successful.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-4-PA_BIND_RETVAL
### Response:
(Severity: 4), (Category: IP), (Description: A certain ICMP6 type couldn't be registered with PA.), (Recommended Action: Restarting lpts_pa and then ipv6_io may fix this issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-6-COMMITDB_SANITY
### Response:
(Severity: 6), (Category: MGBL), (Description: An error was encountered while stating a file in commitdb sanity module. This could be an intermittent software failure and this will get resolved automatically.), (Recommended Action: The error message is simply an informational message as the problem will get resolved automatically and no action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-LOCK_ORDER
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected a violation of lock ordering requirements), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR_API-3-ERR_INVALID_PKT_PTR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Invalid Packet pointer received while trying to return a group of buffman buffers to ES rx/tx mem pool This message indicates error condition where invalid packet pointer was received while freeing buffers.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-EA_ROLLBACK_FAILURE_DURING_MODIFY
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface. 'interface <interface name>' 'no service-policy input | output <policy-name>' 'commit' 'serveice-policy input | output <new-policy name>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-CALLBACK_WRONG_THREAD
### Response:
(Severity: 3), (Category: ROUTING), (Description: A callback from the IOX-XR infrastructure was not handled by the MPLS-TE process because it was received in the wrong thread. The TE process may now be in an inconsistent state with the rest of the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The te_control process may be restarted in order to recover from this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-6-INVALID_PROTOCOL_FIELD
### Response:
(Severity: 6), (Category: IP), (Description: Received a packet with an invalid protocol field from EthServer. No action required, this packet will be ignored (dropped).), (Recommended Action: This is an informational message. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INTF_CS_SEC_REG
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register for notification of Canary Stamp Security. This is may be due to lack of resources or an internal error (the error message will indicate which). It requires a restart of the process for recovery.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_MCAST-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM MCAST, error information), (Recommended Action: Please collect the console log, multicast traces (show mfib trace loc <>, show mfib hardware ltrace location <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLIENT-7-NUM_OF_SENSORS_OVERFLOW
### Response:
(Severity: 7), (Category: OS), (Description: Cannot set more sensor ID than number of sensors.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-EVM_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Failed in some event management functions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-7-ERR_GENERAL
### Response:
(Severity: 7), (Category: ROUTING), (Description: Miscellaneous MPLS LSD error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEX8111-3-WARN_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: The driver process will re-start and complete initialization of the switch device. However, if this message is seen for more than 5 times than please reload the card using -hw-module location <> reload and check if the message still occurs in subsequent reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FMGR-3-MATCH_TYPE_IN_ACL_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The following match criteria specified in an ACL are not supported as part of a QoS policy: Packet Length, TTL, TCP Flags. An ACE containing any of these match fields will be ignored i.e. it will not be programmed.), (Recommended Action: If the behavior is not acceptable, remove the Qos policy from the interface and re-apply it after removing the un-supported match criteria. 'no service-policy <policy-name> input|output')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKEv2-6-AUTHENTICATION_FAILED
### Response:
(Severity: 6), (Category: SECURITY), (Description: Unable to authenticate IKEv2 security association with it's remote peer), (Recommended Action: Contact the remote peer's administrator.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install verify healthcheck command in IOS XR?
### Response:
The 'install verify healthcheck' command performs a set of system health checks before proceeding with an installation operation. It verifies that there is enough disk space, memory, and that the configuration is consistent across nodes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver failed to create an event manager during the driver initialization. The driver will be non-operational due to this error.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_4_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_MGD_TIMER_GET_ROOT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IP_EA-3-ERR_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_BAG_ENCODE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. An attempt to encode data for this has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization, causing the OSPFv3 process to terminate.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-DEBUG
### Response:
(Severity: 7), (Category: HA), (Description: Internal Debug Message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-SRGB_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing a modification to the SRGB This is a fatal error and the IS-IS process will abort or become inconsistent. It may be possible to recover by restarting the isis process), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-ENFORCE_EVAL_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature has been used exceeding evalution period.), (Recommended Action: The customer should either register for license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-5-OIR_INSERTED
### Response:
(Severity: 5), (Category: L2), (Description: For displaying SPA OIR.), (Recommended Action: none.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_SKP-5-ERR_SYSDB_INIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The MFWD-SKYWARP library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
telnet-6-ARM_ADDRESS
### Response:
(Severity: 6), (Category: IP), (Description: 'The call to ip_addr_c_get_v4/v6_best() failed'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_FIA_DRV_DEV_ACCESS
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fia Driver pcie initialization failed), (Recommended Action: reload the card If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-tunnel mesh feature?
### Response:
The MPLS TE auto-tunnel mesh feature enables the automatic creation of a full mesh of MPLS TE tunnels between a set of routers. It greatly simplifies the provisioning of TE tunnels in a full mesh topology. Auto-tunnels are created between each pair of routers in the specified mesh group.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-SESSION_SECURED_WITH_FALLBACK_PSK
### Response:
(Severity: 5), (Category: L2), (Description: When MKA failed to secure the session with primary PSK, a new connectivty association(CA) created with fallback PSK termed as fallback CA, was able to secure the MKA Session, SESSION_SECURED happens successful only after MACsec Secure Channels and Secure Associations have been installed and enabled for both Rx and Tx.), (Recommended Action: Make sure not to have any config conflicts(key, key-string, lifetime) across the MACsec peers, configure valid primary PSK's in the keychain repository.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VRRP-4-WARN_SHMEM_RESET
### Response:
(Severity: 4), (Category: IP), (Description: There was a version mismatch in the VRRP shared memory and in handling this, the resetting of the shared memory failed. This may result in a memory leak.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-3-TX_STALLED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ethernet server is performing a periodic self test to ensure that transmit has not stalled for any reason. This error msg means that the test failed and transmit has stalled. Eth server will correct the condition by restarting itself and operator needs to do nothing.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMA-3-MTU_IMPOSE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The specified MTU could not be applied on this interface.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-ERR_HW_THRESHOLD_HARD_RESET
### Response:
(Severity: 2), (Category: L2), (Description: A hardware error is detected on the PLIM, and the error threshold has been crossed. Software will take action as described in the error message to try to contain or recover from the error. The hardware error and the software recovery action will cause hard reset of a device in the data path and will impact traffic. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Threshold of %s - the defined threshold for this error. Software action: %s - the action that software will take to try to contain or recover from the error.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_COMMON-7-TIMER_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to Attaching event timer to the L2FIB PD component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_IMDR_PROC_START_TIMEOUT_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card is being reset because of timeout waiting for start of new version of MBI processes during IMDR from a specific node. This is an indication of IMDR operation failure during ISSU.), (Recommended Action: If the problem persist, collect the output of 'show tech-support install', 'show tech-support issu' and 'show tech-support shelfmgr' commands before contacting Cisco for technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_LTRACE-3-WARNING_INFO_VERBOSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM THOR L2FIB, error information), (Recommended Action: Nothing. Platform will correct itself)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FAILED_LOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node failed to load the IOS XR image for maximum number of retries and will be reset.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-INFRA_START
### Response:
(Severity: 5), (Category: L2), (Description: After all infra init dot1x process came up.), (Recommended Action: No action required (normal operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_1_NPU_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-1 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VCM-2-IM_PROC_DOWN
### Response:
(Severity: 2), (Category: L2), (Description: IM(Interface Manager) did not come up before the timer expired), (Recommended Action: IM(Interface Manager) is down. Remove and reapply the config after the IM comes up.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-RX_POWER_THRESHOLD_ALERT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Rx power threshold of higher than 30 should be set only for transceivers which are 3rd party optics. For cisco CFP2 transceivers it should be less than or equal to 30.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_SFP0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PIFIB-7-DEBUG_INIT_EVENT
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when initializing debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-4-ADRSPC_LIMIT
### Response:
(Severity: 4), (Category: L2), (Description: The process indicated tried to map more of the Forwarding Engine's address space than was allocated for it. A slower access method will be used instead. This will lower the performance of some operations which require accesses to the Forwarding Engine), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6-3-SYSDB_BIND_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Failed to connect to SysDB while starting the indicated subsystem. This usually happens when the process is starting up.), (Recommended Action: Wait for sometime till the process comes up and even after that if the error is seen restart ipv6_ea. This may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_MISSING
### Response:
(Severity: 3), (Category: OS), (Description: There is a missing required parameter after a keyword in a policer definition. The policer may be assigned default characterstics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-RMCONTEXT
### Response:
(Severity: 4), (Category: OS), (Description: The Event Manager could not allocate memory to construct a Resource Manager context when delivering an RM message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Either some process is using too much memory or there is not enough physical memory available in the router. Determine if an application is misbehaving by checking the amount of memory allocated to each application and noting whether one is unusually large. If there are no misbehaving applications, memory should be added to the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-7-ERR_LWM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq failed to create an Event Manager), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTERFACE-4-ERR_SYSDB_BAG_DECODE
### Response:
(Severity: 4), (Category: MGBL), (Description: Failed to decode data retrieved from database), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-4-UNSOLVED_BRIDGE_TYPE_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: If the previous pseudowires have a pw-class with pseudowire type Ethernet VLAN, then these pseudowires will go down if new pseudowires are configured as pseudowire type Ethernet.), (Recommended Action: Check whether there is possible mis-configuration, for example in pw-class.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-DSP_LINE_RX_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No line lock between the NPU and DSP), (Recommended Action: Contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-7-LOCKING
### Response:
(Severity: 7), (Category: SYSDB), (Description: The client library has either failed to aquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-SPAN_SESSION_CREATE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A failure has occurred while creating span session.), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-6-INTF_REMOTE_LOOPBACK
### Response:
(Severity: 6), (Category: L2), (Description: The OAM session has either entered or exited local or remote loopback. If loopback has been entered then traffic flow will be disrupted until it is exited at which point normal functionality will resume.), (Recommended Action: None. This is an informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_1_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-VOQ_PROG_ERROR
### Response:
(Severity: 3), (Category: QOS), (Description: Unable to program one ore more VoQs with the queueing parameters received for a remote interface. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_MISSTYPE
### Response:
(Severity: 4), (Category: SYSDB), (Description: The command entered requires an item type and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-PDP_SET_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: The RS232 DLL has failed to enable the persistant data path for a TTY.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-ERR_ASIC_PON_RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: Identified Fabric ASIC experienced a severe error and is halted. Power on reset & re-initialize the ASIC to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-4-STATS_GATHER_PERIOD
### Response:
(Severity: 4), (Category: INFRA), (Description: If there are a large number of interfaces, and the time between gathering all the packet stats is small, then there can be a performance impact accross the system for the statistics gathering.), (Recommended Action: Consider changing the update-frequency configuration to a longer period to minimize the performance penalty.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_140G_POD-3-ERR_GASPP_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The sfe-drvr process cannot initialize the infrastructure allow read/write access to the POD registers on the fabric card.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-INSUFFICIENT_ZONE_POWER
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that power allotted to the zone has exceeded the available zone power budget.), (Recommended Action: Please check the 'show power' command to resolve this situation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-DESTROY_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: A CPP driver failed to destroy a connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-5-INVALID_REGISTER
### Response:
(Severity: 5), (Category: ROUTING), (Description: PIM invalid register message notification.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_SVR-3-FABRIC_UNSUPPORTED_CXP
### Response:
(Severity: 3), (Category: FABRIC), (Description: Unsupported CXP connected to fabric card.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_5_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-6-MGDTIMER
### Response:
(Severity: 6), (Category: ROUTING), (Description: An external managed timer support routine failed. The affect this error has on the proper operation of OSPF depends on where and when this error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-PLX_ERRATA
### Response:
(Severity: 4), (Category: DRIVER), (Description: Accessing PLX and related ports over PCI and I2C and check that PLX ERRATA execution completed successfully or failed.), (Recommended Action: For the RP/SC where SFE is active, wait for system recovery. If SFE is not active in the RP/SC, manual intervention might be needed for recovery. Collect 'show tech-support ctrace')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABMGR-0-INCONSISTENT_DB
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Fabricmgr encountered internal database consistency error. This usually occurs due to back-to-back faults. To recover, reloading impacted linecards.), (Recommended Action: Fabricmgr encountered internal database consistency error. This usually occurs due to back-to-back faults. To recover, reloading impacted linecards. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SAT_CHASSIS_INVMGR-6-OIRIN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Fantray or Powertray entity is inserted in satellite.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you define a BGP neighbor group in IOS XR?
### Response:
A BGP neighbor group in IOS XR is defined to apply common configuration to multiple peers, reducing configuration redundancy. router bgp 65000
neighbor-group EDGE-PEERS
remote-as 65001
update-source Loopback0
address-family ipv4 unicast
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_GENERAL
### Response:
(Severity: 3), (Category: MGBL), (Description: 'mirror encountered error, see message for more details'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is a thread in the context of the IOS XR microkernel?
### Response:
A thread is a unit of execution within a process. The microkernel schedules threads, not processes. A process can have multiple threads. Threads time-share the CPU and can communicate using synchronous message passing IPC. Context switching between threads is very fast.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-6-SLICE_OPER_STATE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Indicates that the change in oper state of slice.), (Recommended Action: None tac_details: None)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-DLL_INFO
### Response:
(Severity: 7), (Category: OS), (Description: Dll information for the process being dumped), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-4-WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: A warning about a unexpected event that occurred. The warning message describes the event. The event does not impact any critical system functionality, but may affect some auxiliary function such as internal debugging or may activate some recovery path.), (Recommended Action: The warning is not critical, but should be documented and addressed at the normal service window for the system. Copy the error message exactly as it appears on the screen and gather the output of CLI 'show tech-support ethernet interfaces'. If the issue persists, please contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-ENS_NOTIF_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has failed to notify clients of state changes via ENS.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_OC_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: BITS transmitter has detected an open circuit condition.), (Recommended Action: Ensure cable connection between the configured interface port and external equipment.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK-4-NODE_FAILED
### Response:
(Severity: 4), (Category: OS), (Description: RCC or LCC detected a node that did not reply to statistics request during a background scan. It is possible that the node is just busy with processing updates and could not reply to the statistics. It is also quite probable that the node in question is blocked and is not no longer working properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKYWARP_INTF_INJ_CAP_DLL-3-LTRACE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The ltrace file could not be created.), (Recommended Action: Please contact TAC Support Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
c2c_iif-3-ERR_SW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The C2C IIF library encountered an error which it cannot resolve.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-RVM_ERROR_CALL_BACK
### Response:
(Severity: 7), (Category: HA), (Description: An error occured in CAPI with RVM-Manager.), (Recommended Action: This indicates an issue on CAPI with RVM-Manger, Collect show tech HBloss, show tech ctrace, vm-monitor process core.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option explicit feature?
### Response:
The MPLS TE path-option explicit feature allows the path for an MPLS TE tunnel to be explicitly specified using a configured path. An explicit path is a list of IP addresses or interface names that define the tunnel's route. Explicit path-options override dynamic path calculation and provide exact control over the tunnel's path.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-ERR_DUP_MAC_ADDR
### Response:
(Severity: 3), (Category: L2), (Description: Another node on the ring is using the same MAC address as this node. This can effect traffic forwarding.), (Recommended Action: Correct the configuration of each node, where necessary, to ensure that each node uses a unique MAC address. Use the 'show srp topology' CLI to identify any nodes using the same MAC address.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWDLIB-7-ERR_INIT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Initialization of fwdlib has failed.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TELNETD-3-SYSTEM_ERROR
### Response:
(Severity: 3), (Category: IP), (Description: The invocation of a system call returned error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-3-I2C_ERR
### Response:
(Severity: 3), (Category: DRIVER), (Description: This indicates that there is a HW failure on i2c bus), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-BPM_NEG_NBR
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP and sysdb are out of sync (neighbor config present but no neighbor in bgp) and as a result, unconfiguring neighbor results in negative neighbor count in BGP), (Recommended Action: This message is info only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-INFO_SHM
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered a change in the shared memory region parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-TRANSFER_INTERRUPT
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: Control session to satellite disconnected while image transfer was in progress. Run 'show nv satellite protocol control' for more information.), (Recommended Action: Re-try the transfer once the session has reconnected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_2_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB-3-SHM_CREATE_FAIL
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to create the FADB shared memory.), (Recommended Action: Search the event logs for events/errors related to the failure reason. Shared Memory Management is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) and the output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-STATE_ERROR
### Response:
(Severity: 3), (Category: DIAG), (Description: An internal state of the diagnostics process was set to an invalid state or value. The process did not know how to handle this state. This is a serious error and may indicate a bug in the software. This is not a service impacting error.), (Recommended Action: Check the log ('show logging') to determine if there are any other related error messages. Also, please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area. If the error continues, copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Also collect the information from 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-NODEID_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Getting a node id to find out the mbimgr is running on that node or not got failed. Either an invalid location is being queried, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out. %s - indicates the location of the error. %s - indicates the error message.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-2-SHARED_PAGE_ERROR
### Response:
(Severity: 2), (Category: OS), (Description: SHMWIN hit an error related to the shared page. This error indicates that the shared memory window library detected a service internal error condition. This does not mean a service impacting condition.), (Recommended Action: If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show memory location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SYSDB_UNBIND_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: Dumper keeps various config related data in sysdb. Here dumper could not connect to sysdb), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_OC48-3-ERR_SFP_OIR
### Response:
(Severity: 3), (Category: L2), (Description: There is an error detected during SFP OIR. SFP is the pluggable optics on the SPA, SFP OIR can cause some operation in sw, e.g. create/delete optics object, SFP authentication. 'SFP OIR error' is for any possible error during the operation. The optics will not work if SFP OIR operation failed, therefore no traffic can pass. %d - SPA bay number %s - indicates the reason for the failure %s - is the decoded error reason), (Recommended Action: - Check the SFP, make sure it is CISCO certified; - Try to do the SFP OIR for a few more times; - If the issue persists, reload the SPA with the command: hw-module subslot 0/x/x reload then test SFP OIR after SPA comes up. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_14_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-6-OPERATION_OVERRIDE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Override condition has been triggered.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-3-ERR_AUTO_TUN_BKP_TUN_DEST_LIMIT_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The creation of the auto-tunnel backup aborted since it would have exhausted the tunnel destination scale limit), (Recommended Action: Reduce configured/auto tunnels to below the system destination limit)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-4-MTP_MODE_DETECTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
C_SHIM_PARTNER-3-SVR_UBIND_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is a software error when trying to unbind to IM.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_AB_INTR_IFIFO_ORUN0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_AB_INTR_IFIFO_ORUN0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-SETPRIO_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Attempt to change priority failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SYSMGR_PROC_READY_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A failure occured while trying to tell sysmgr that we are ready for processing.), (Recommended Action: Check whether policy_repository process is running properly by command 'show process policy_repository' Check the install logs if all the packages are downloaded and install operations completed properly)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACCTD-3-MEMORY
### Response:
(Severity: 3), (Category: SECURITY), (Description: acctd failed to allocate the required amount of memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-3-ERR_DBG_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: IGP failed to register with the debug module for printing messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-6-COREDUMP_TIMEOUT_CANCEL
### Response:
(Severity: 6), (Category: OS), (Description: A process core dump has been cancelled as it is not likely to finish within the indicated max core dump time. Reasons could be it has been pending in the process dumper waiting queue too long, or that the core dump itself took too much time.), (Recommended Action: No action required. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-7-EVENT_ERROR
### Response:
(Severity: 7), (Category: L2), (Description: The pfilter_ea process received a bad event. This pfilter_ea process programs the 'packet filter' security access control list in the hardware. %s - is the decoded error reason.), (Recommended Action: Monitor the event messages. The pfilter_ea process will handle the failure gracefully but if they continually appear on the console, try doing 'process restart pfilter_ea location 0/x/cpu0'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-FRIS_INSERT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when adding the interface to the forward-reference list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_BDI_DEMB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-4-MAX_INTF_APPLY
### Response:
(Severity: 4), (Category: ROUTING), (Description: The number of interfaces configured exceeds the interface limit.), (Recommended Action: Either raise the maximum interface limit or unconfigure interfaces until the number is below the limit.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-UNKNOWN_MEMSTATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: BGP received a low memory notification from wdsysmon for an unknown memory state, ie not NORMAL, MINOR, SEVERE or CRITICAL. As a result, no action was taken.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTP1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYNCFS2-7-LRD_PARTNER_AVAILABLE
### Response:
(Severity: 7), (Category: MEDIA), (Description: The Standby card has been inserted and sync will be started), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PWHE_EA_PD-7-ERR_NOTSUP
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-3-TIMER_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Something went wrong with the timer), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-LATEST_BIOS_BOOT_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDLD-5-TX_RX_LOOPBACK
### Response:
(Severity: 5), (Category: L2), (Description: The UDLD protocol has detected that packets transmitted from this port are being received on the same port. The link will be disabled. This could be caused by one of the following: - There is a connection between the Tx and Rx of this port (directly or via intermediate non-UDLD-aware connections) causing transmitted packets to be received on the same port. - This port has a peer which is using the same device ID and port ID.), (Recommended Action: Correct the miswiring or misconfiguration, then re-enable UDLD using the following command: - ethernet udld reset interface <port name>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_NETIO_LTRACE-7-INIT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-GET_PLIM_TYPE_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to get the plim type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB_TOPAZ-7-ERR_HEARTBEAT_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected a problem in the internal state machine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-3-DLOPEN_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Dumper startup failed because loading of some dlls failed. Most likely cause is memory running low.), (Recommended Action: Please free some space or restart the process dumper. If the issue is seen even after restart then, Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show memory)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM-3-MSG_SEND_PULSE
### Response:
(Severity: 3), (Category: OS), (Description: SSM process tried to send a pulse to the clients channel using MsgSendPulse api and encountered a failure.), (Recommended Action: Collect system log information for the reported service and pid. For mentioned pid collect show process <pid> and follow process <pid> Also collect show process blocked , show tech ssm. If this message is seen repeatedly, capture the output of debug event-manager all job <ssm jid>. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_AIB_MAP
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_ACL-6-IPACCESSLOGDP
### Response:
(Severity: 6), (Category: ACL), (Description: A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option and matches with the IP protocol type ICMP. This message is seen for the first match and for each match after the hit count is greater than 0x7FFFFFFF(2147483647).), (Recommended Action: This is information only message, no action required No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-SOFT_ERROR_ALERT_3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 3.), (Recommended Action: Please reload the board in the next maintenance window. Until then affected ports will be down. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TS_LS_LEN_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a length error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-PWR_EXCEEDED_WARN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The chassis power usage has exceeded the configured warning threshold.), (Recommended Action: Ensure that adequate power is available for the chassis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-INVALID_LSP_LIFETIME
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS received invalid value for the remaining LSP life time using the timer library. IS-IS will handle this gracefully by limiting the value to maximum allowed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-LTRACE_INIT_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: ltrace initialization for ltrace synchronization server failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBDLLMGR-4-OVERFLOW_DELETE
### Response:
(Severity: 4), (Category: OS), (Description: An overflow encountered for the process. This is not an error.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-BAD_IPC_REQUEST
### Response:
(Severity: 7), (Category: HA), (Description: An invalid IPC request type was received by the proxy process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-3-SHM_WIN_SETUP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The process was unable to map and configure a shared memory window, causing the process to return unexpectedly. Debugs will provide more info), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
KIM-4-LOG_WARNING
### Response:
(Severity: 4), (Category: INFRA), (Description: please see show kim log for more information.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-7-ERR_SEND_EGRESS_IPSLA_PKT
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Internal Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ncs5500-1-RESTART_NOT_SUPPORTED
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message in the DPA module to indicate that a process that doesn't support restart has been restarted (crash, CLI or SMU installation) Process will trigger node reload to recover after collecting required information in the linecard's disk), (Recommended Action: Please collect the core file and DPA traces from linecard's disk Ignore this if process was operationally restarted like process restart command or process restart SMU installation those operations are not supported yet and nothing to debug at this point)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-7-DELETE_IDB_SUBINTF_ASSOC_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: NetIO cannot delete a interface which still have subinterfaces under it. This could potentially cause issues with recreate of any interface, if the same interface handle is reused.), (Recommended Action: After the information is gathered, restart of netio should possibly bring netio in sync with ifmgr & delete the main and subinterfaces. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ARP_REQUEST_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A request to resolve IPv4 next-hop addresses failed for the specified error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_RIB_BATCH_BUFFER
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS encountered an unexpected error while defining a batch of updates to be sent to the RIB. This is an internal software programming error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-3-SEU_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: Single Event Upset(SEUs) are probabilistic events in large memory systems. They can happen due to cosmic rays and alpha particles often emitted by device packaging. SEUs effect is valid on CRC block FPGA's used in fretta systems. When an SEU occurs a bit-flip in CRC is seen, which leads to CRC mismatch. On an SEU, FPGA asserts SEU pin and an NMI is raised. Currently, we are handling 3 types of SEUs: 1. CRC_ERR of IOFPGA 0x60 2. CRC_ERR of DBFPGA 0x61 3. CRC_ERR of MIFPGA 0x62), (Recommended Action: This is not destructive in nature and will require cold reload of the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XFP-3-HIGH_LASER_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an XFP laser bias greater than or equal to the high laser bias warning threshold. The XFP is the pluggable optics on the line cards. The laser bias threshold values are read from the XFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you list all software packages available for installation in Cisco IOS XR?
### Response:
All software packages available for installation in Cisco IOS XR can be listed using the 'show install repository' command, which displays packages stored in the software repository.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-DBG_ON
### Response:
(Severity: 3), (Category: OS), (Description: An error occured whilst PlaceD tried to turn on debugs.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-4-ERR_CHKPT
### Response:
(Severity: 4), (Category: FABRIC), (Description: The FIA driver encountered an error while updating or accessing its checkpoint information. Further high availability of the driver may be impacted.), (Recommended Action: Verify that the fia_driver process is up and running by executing the following command at the CLI of the active RP: 'show process fia_driver' If the high availability of the FIA driver is not important, then this message may be ignored. However, if this functionality is necessary then restart the FIA driver by issuing the following command at the CLI of the active RP: 'process restart fia_driver' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-2-MANAGED_REBOOT
### Response:
(Severity: 2), (Category: OS), (Description: A critical process ran into trouble and will reboot the node.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the ATT (Attached) bit in IS-IS?
### Response:
The ATT bit is set by L1/L2 routers in their L1 LSPs to indicate they can reach other areas. L1 routers use the ATT bit to find the closest L1/L2 router to send traffic destined outside the area.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp graceful-restart stalepath-time' command in IOS XR BGP configuration?
### Response:
The 'bgp graceful-restart stalepath-time' command is used to configure the maximum time that a BGP speaker will hold onto the stale routes of a restarting peer. It is part of the BGP Graceful Restart configuration. The default stalepath time is 360 seconds. After this time, if the restarting peer has not come back up, the stale routes are removed from the routing table.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDT-5-STREAM_AT_GATHERPOINT
### Response:
(Severity: 5), (Category: MGBL), (Description: Specified sensor path will stream at gather point, specific leafs or containers under the gather point cannot be selected for this profile.), (Recommended Action: None. This is informational message specifying the expected behavior.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-ALARM_DISPLAY_THREAD_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that shelfmgr cannot create consumer thread for setting LED display or alpha display.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-PROC_CNT_SEVERE
### Response:
(Severity: 3), (Category: HA), (Description: When number of processes has crossed above SEVERE Threshold Percentage.), (Recommended Action: The number of processes running has increased. Determine if there are any unnecessary processes available in dir '/var/log/debug_proc_cnt' and kill them by using kill -9 <PID>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-DLLINFO_ZERO_REFCOUNT
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB has reached zero refcount for dllinfo. This indicates the accounting is incorrect. There may be no immediate impact on traffic, but this issue should be addressed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_REOPT_INIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: Reoptimization has been initialized for the specified interface.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-5-EAP_ATTESTATION_TRUSTVECTOR
### Response:
(Severity: 5), (Category: L2), (Description: Successfully verified the stamped passport provided by peer, which had the mentioned trustvector), (Recommended Action: none)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDBUTILS-7-PARSE_FAILED
### Response:
(Severity: 7), (Category: SYSDB), (Description: A pathname was used for a SysDB operation from which the destination node could not be parsed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_TRANS_CREATE_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: APIV transport layer creation failed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_VKG-5-ERR_SYSDB_INIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The MFWD-ASR9K library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SBUS-3-HBM_UNSUPPORTED_MEMORY_CONFIG
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the SBUS Driver to indicate that an unsupported HBM memory configuration has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABIO_TOPAZ-7-ERR_NULL_ARGS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to create thread due to internal error.), (Recommended Action: Restart the fabio_svr process)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CSCMIB-4-SYSDB_BIND
### Response:
(Severity: 4), (Category: SNMP), (Description: The MIB was unable to connect to the system database, so will be unable to provide the MIB data. This may be because the communications infrastructure is not yet up.), (Recommended Action: The communications infrastructure may not be up yet. The operation will automatically be retried and recovered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSA-3-ERR_DEBUG_INIT_EVENT
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics aggregator process encountered an error to initialize debug facility and hence failed to initialize. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_GENERIC_FUNC
### Response:
(Severity: 3), (Category: OS), (Description: A call to some function interface failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-7-ERR_SEND_TE_MSG
### Response:
(Severity: 7), (Category: ROUTING), (Description: The process encountered an error while sending message to TE.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_RX_DESKEW_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_RX_DESKEW_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_0_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-DAEMON_ERR_SYSDB_UNBIND
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while using SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-DATABASE_CORRUPTED
### Response:
(Severity: 3), (Category: QOS), (Description: The DPA QoS EA module encountered a database corruption error. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_EA-4-ERR_INIT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: A failure occured during the initialization of the process. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOSLIB-3-DLOPEN
### Response:
(Severity: 3), (Category: QOS), (Description: This message is seen when the process fails to open the DLL 'libqos_ea_ui_supp.dll'. This failure may occur only on RP. It may fail to open the DLL due to any one of the following reasons: 1. list of DLL objects is empty or the list itself doesn't exits. 2. if no symbol in executable. 3. if the memory allocation fails at any stage 4. if the dll is not unique with respect to the other DLL's loaded and placed in the list.), (Recommended Action: Please get the information specified under the component required_info and call your Cisco technical support representative and provide the representative with the gathered information with this error message text.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM-2-PPS_ACCESS_PERSIST
### Response:
(Severity: 2), (Category: L2), (Description: Software could not access the PPS device during initialization.), (Recommended Action: Recommended to reload the PLIM at the next maintainance window. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XML_TTY-7-TRANSPORT
### Response:
(Severity: 7), (Category: MGBL), (Description: The XML TTY Agent encountered a problem when interacting with the device file. This may be due to a problem with the infrastructure), (Recommended Action: Retry the XML request. Any transient conditions should have passed, and in all likelihood, the request will go through. If not, it may help to close the current TTY session and restart another. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
adminexec-3-GETLINE_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: getline_init() failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_4
### Response:
(Severity: 3), (Category: IP), (Description: Tunnel encapsulation configured on the MAG does not match with that on the LMA.), (Recommended Action: Note the CoA address and IMSI (if available) from the error message. Run the following commands on the MAG that corresponds to the above CoA address or IMSI. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config | section mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config | section mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ipv6 mobile pmipv6 mag globals<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ipv6 mobile pmipv6 mag globals<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the tunnel encapsulation type for this LMA from the output of the above commands. Run the following commands on the LMA. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config ipv6 mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config ipv6 mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show ipv6 mobile pmipv6 lma globals<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show ipv6 mobile pmipv6 lma globals<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the tunnel encapsulation type for the above peering MAG from the output of above commands. If the tunnel encapsulation is not the same, reconfigure it on the MAG and/or LMA. If the issue persists, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-TDDR_FIFO0_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: TxDDR 200 to 1875 FIFO 0 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_MDM-7-DEBUG_MSG
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-MUTEXINIT_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: pthread_mutex_init system call returned an unexpected error Debug trace buffer initialization failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_drop-3-DIVERT
### Response:
(Severity: 3), (Category: SERVICES), (Description: A pre-routed packet created on the router's host stack hit a problem during service diversion processing. The packet was dropped.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_ECD-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PLATFORM FIB, error information), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_PLIM_SB-3-MSG_SEND_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: A message to the specified SPA could not be sent. The reason for the failure is specified in the message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MLACP_BUNDLE_ACTIVE
### Response:
(Severity: 6), (Category: L2), (Description: The role of the mLACP device for this bundle has changed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SIM_INV_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SIM inventory operation error.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_PTHREAD_RWLOCK
### Response:
(Severity: 3), (Category: MGBL), (Description: 'pthread_rwlock_* function failed due to mentioned error'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of using Route Target (RT) in Cisco IOS XR MPLS VPNs?
### Response:
Route Target (RT) in Cisco IOS XR MPLS VPNs is used to define which routes are imported into and exported from a VPN, controlling the distribution of VPN routes between different sites.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR RSVP hello state timer feature?
### Response:
The MPLS TE FRR RSVP hello state timer feature allows the configuration of the RSVP hello message interval and missed message threshold for backup tunnels. RSVP hello messages are used to detect the loss of connectivity between the backup tunnel headend and tailend. Tuning the timers allows faster detection of backup failures while avoiding false alarms.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_CW_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_CW_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD-3-ERR_MISMATCH
### Response:
(Severity: 3), (Category: SECURITY), (Description: Mismatch in the received and expected data), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-6-PROFILE_VERIFY_FAILED
### Response:
(Severity: 6), (Category: INFRA), (Description: The SLA Client Library received a profile that failed verification. This indicates that the criteria that the Client Library is using to verify profiles differs from that used by the Profile Manager. This may occur around process restart of the protocol or Profile Manager. Any operations using this profile shall be suspended and their associated metrics removed.), (Recommended Action: The Client Library will attempt to resync itself with the Profile Manager or an immmediate resync can be attempted by reconfiguring the profile when there are no process restart events occuring. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the Cisco Discovery Protocol (CDP) in network monitoring?
### Response:
Cisco Discovery Protocol (CDP) is a Layer 2 protocol that enables Cisco devices to advertise their identities and capabilities to neighboring devices. It helps in discovering and monitoring the network topology.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-STAT_INFO_VOID
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTERFACE-3-CI_GEN_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to do DLL operation), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-ERR_INGRESSQ_SYNC_TIMEOUT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The ingressq driver needs to be in sync with the fabricq driver, so that both the ASICs go for halt together, and also come out of halt state in synchronous manner. This error indicates that the fabricq driver went out of sync with the ingressq driver. This will result in card reload and consequent traffic drops.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-STATS_ALLOC_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The DPA failed to allocate statistics entry for the feature. Number of feature entries requiring statistics entries has exceeded statistics entries reserved for that feature on this line card. As a result, accouting for the failed feature entries is not available. There is no impact on ability to apply the feature in hardware.), (Recommended Action: If per feature accouting is needed, reduce the feature configuration on this line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA-3-MAP_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: Failed to deallocate any mapping for the region starting at ADDR and extending LEN bytes %x - base address %d - maximum physical address space), (Recommended Action: Restart the spa process, spa and LC to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_IMC_CLIENT-3-ERR_IMC
### Response:
(Severity: 3), (Category: ROUTING), (Description: MPLS LIB IM client library failed to register for debugging.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_0_FIA_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error - 0 from FIA on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TX_LOL_MAPPERB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-VOLT_ALARM_SHUTDOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: If voltage validation failed, the card will be power down by Shelfmgr.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-4-BRM_PHASE_CHANGE_COUNTER
### Response:
(Severity: 4), (Category: FABRIC), (Description: Barrier Manager encountered a phase change error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-FROM_MRIB_UPDATE_GLACIAL
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-7-EVENT_MGR_CREATE_FAILED
### Response:
(Severity: 7), (Category: MEDIA), (Description: Failed to create event manager for the process), (Recommended Action: Try to start it from the command line. If that too fails Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-3-ECC_ONE_BIT_SFP_CONTROL_B
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Poller device driver Detected and corrected one bit error on port B), (Recommended Action: Its a correctable error, no action needed. Verify no false DOM alarms for ports on corresponding poller device)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_AHS_LOS_LANE3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CDS_DB-3-CLINFO_HOLD
### Response:
(Severity: 3), (Category: OS), (Description: Failed to hold the client.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AHCI-2-DEV_HD1_NOT_RESPONDING
### Response:
(Severity: 2), (Category: PLATFORM), (Description: SATA HD1 device not responding), (Recommended Action: Please attempt the following: If dual RSP, and the problem is on the active RSP, issue 'redundancy switchover' If the problem is on the standby/simplex RSP: Restart low level ahci driver via ksh, 'process restart devb-ahci' Failing which, Reload RSP If problem persists, SATA HD1 devices have to be replaced If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_RECREATE_BUNDLE
### Response:
(Severity: 4), (Category: L2), (Description: When recovering the checkpointed data for a bundle, an error occurred and the data is lost.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show interface <bundle name><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show interface <bundle name><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show bundle <bundle name><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show bundle <bundle name><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show adjacency <bundle name> detail hardware location <loc of error><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show adjacency <bundle name> detail hardware location <loc of error><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the bundle appears correctly in the output of all three commands then no further action is required, otherwise unconfigure and reconfigure the bundle.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_UP_REJECTED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_ASYNC_FIFO_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU async FIFO multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PIFIB-7-DEBUG_REGISTER
### Response:
(Severity: 7), (Category: OS), (Description: An error was returned when registering debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-FABRICQ_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to create one of the fabricq queues.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-6-UPDN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A link to the RSP control plane switch has change state.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers epm-switch port-status <port> location <loc in msg><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers epm-switch port-status <port> location <loc in msg><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.' 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers epm-switch port-mapping location <loc in msg><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers epm-switch port-mapping location <loc in msg><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-SE_PLATFORM_INFO_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The platform information sent to Service Engine failed to get processed.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How can you list all software packages available for installation in Cisco IOS XR?
### Response:
All software packages available for installation in Cisco IOS XR can be listed using the 'show install repository' command, which displays packages stored in the software repository.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HARDDISK-7-UNSUPPORTED_BOARD
### Response:
(Severity: 7), (Category: MEDIA), (Description: GET_PROCESS_MODULE derives the module type from the Board type. Unable to get the Board_type, hence unsupported Board type.), (Recommended Action: 'Check EEPROM programmed correctly and also check whether it is cisco supported router ')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-UNSUPP_RX_CH
### Response:
(Severity: 3), (Category: FABRIC), (Description: The Rx POD detects an unknown error on a channel. The channel might not be functioning properly, and can cause cell drops, or corruption from received cells. There can also be a software bug such that the error is not handled), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_rio_netio-3-SUBBLOCK_REG_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: The service ingress diversion NetIO DLL initialization function failed to register the RIO subblock type.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-6-LICENSE_CLEAR_NO_POOL
### Response:
(Severity: 6), (Category: LICENSE), (Description: The 'clear license' command was executed, but there are no pools to be cleared on this system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP path error handling?
### Response:
To configure RSVP path error handling, use the 'rsvp error' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp error
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_TDM-7-TRANSLATION_FATAL
### Response:
(Severity: 7), (Category: HA), (Description: An error occurred during data translation. The process will restart without checkpointed data.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-UART_ACCESS_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in UART READ/WRITE access to octeon memory. Exact Cause of the error will be mentioned in the message displayed. This error causes Linux/Application image download and launch to fail.), (Recommended Action: Do cold reboot of Services PLIM MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-3-PCL_CCNT_ERR
### Response:
(Severity: 3), (Category: FABRIC), (Description: Sponge encountered a PCL cell count mistmatch error. The cell count from the cell header mismatches with the cells that arrived for the same packet.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_BUNDLE_STATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Bundle state has changed. This can be because the state of one of the bundle ports comprising the bundle has changed. A bundle port is considered down if all the links comprising the bundle port go down.), (Recommended Action: This message is expected if a cable is inserted or removed, or if a fabric card (or chassis) to which the cable connects is powered on or off, or rebooted. If a change to DOWN is seen in other circumstances it may be due to a hardware failure. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ND-4-ERR_SLAAC_PREFIX_PER_RA_EXCEED
### Response:
(Severity: 4), (Category: IP), (Description: Cannot add any more prefix for this RA as maximum prefixes per RA has been reached.), (Recommended Action: Please remove the prefix[es] for the RA from Peer connection. Collect IPv6 ND and check-point traces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-APP_INTF_INCON
### Response:
(Severity: 3), (Category: SERVICES), (Description: The received instance info for this interface is same as waht had already been configured.), (Recommended Action: This is a serious error and cgn_ma process has to be restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_5_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-DISK_NORMAL
### Response:
(Severity: 6), (Category: HA), (Description: When all monitored disks' usage are below 80%.), (Recommended Action: The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-3-APIV_NEG_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: API Version negotiation failed due to timeout.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTT3
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-INTERNALERR
### Response:
(Severity: 4), (Category: INSTALL), (Description: An internal software error occurred.), (Recommended Action: An internal software error occurred due to an install helper failure. This internal error will be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
tunnel_ea-3-PROC_READY_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: sysmgr had difficulty in processing the READY notification for tunnel_ea.), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-MACSEC_FIPS_POST_CFG_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: L2), (Description: 1. config not supported on this node. If specifically configured for this LC Remove this config using command, 'no hw-module macsec-fips-post location <>'), (Recommended Action: Remove config using 'no hw-module macsec-fips-post location <>.If specifically configured for this LC. Else no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-EA_SHUTDOWN
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This messages indicates that a failure has occured while PBR is gracefully shutting down. Particular reason is included in the message.), (Recommended Action: Allow PBR EA to exit and validate with the command <CmdBold>show process pbr_ea location <node id><NoCmdBold>. If it does not exit, use <CmdBold>process restart pbr_ea location <node id><NoCmdBold> to recover. If the problem persists, contact Cisco TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ERR_MRIB_INIT_RETRY
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-7-DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: An informational message only), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAMSG-3-DEBUG_INTERNAL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: This is an internal SPA related error msg), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYS-3-RN_NDESC
### Response:
(Severity: 3), (Category: MGBL), (Description: A deletion operation to an internal data structure failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_8_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_MAC_CACHE-6-RESYNC_COMPLETE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The command to resynchronize the MAC address table may take a while to complete. This message indicates that resynchronization is complete and the MAC address table can be displayed..), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_12_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-7-GET_NODEID_INFO
### Response:
(Severity: 7), (Category: OS), (Description: Failed to get the nodeid %x- error code %s- Error description), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE passive interface feature?
### Response:
The MPLS TE passive interface feature allows an interface to be excluded from the MPLS TE topology database, while still allowing MPLS TE LSPs to be established over that interface. Passive interfaces are not considered during CSPF path calculation. This is useful for interfaces that are not under the control of TE or that have limited bandwidth.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-3-FIELD_DEPEND_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The PMF dependency ordering is incorrect for the groups configured.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-2-IN_INSTALL_RESET
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Notify node reset reason - install has finished current install operation on the node and would be rebooting it within specified time. drp-reddrv should refrain from rebooting the node until timeout happens.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-NPU_CPA_GEN_ERR_INFO
### Response:
(Severity: 3), (Category: FABRIC), (Description: The NPU CPA generic failure OR info), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the function of the 'install rollback' command in Cisco IOS XR?
### Response:
The 'install rollback' command in Cisco IOS XR is used to revert the router's software to a previous committed state, useful for undoing changes that may have caused issues.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-3-PROFILE_UPDATE_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The SLA Client Library received updated configuration for a profile and the update could not be applied locally. This indicates that there was insufficient memory for modification of the profile and its associated data. Any operations using this profile have been suspended and their associated metrics removed until the profile is successfully updated.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. The Client Library will attempt to resync itself with the Profile Manager or an immmediate resync can be attempted by reconfiguring the profile.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_OPTICS_PWR_SUPPLY_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE3_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE3_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_PKT_F0_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 0 multiple bits error.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-7-MSG_STALL_RESET
### Response:
(Severity: 7), (Category: OS), (Description: The consumer is not servicing the incoming message queue.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ERR_AIB_UPDATE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-3-ERR_THREAD_COND_WAIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to pthread_cond_wait() was unsuccessful'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_6_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-LS_LFI_LENGTH_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a lfi length error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XTC-3-TRACE_INFRA_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: An error occurred in XTC trace infrastructure. See the error message for details. This error can be related to initialization/deletion failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVPN-6-CORE_INTERFACE_STATE
### Response:
(Severity: 6), (Category: L2), (Description: The configured core interface changed state.), (Recommended Action: If the state change was unexpected, confirm the configuration settings for the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-EBS_CPU_LP_FIFO_FULL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress Buffer and Scheduling to CPU FIFO full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-PATTERN_NOT_FOUND
### Response:
(Severity: 3), (Category: MGBL), (Description: Taskid pattern not found where it was expected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOSXRV_LICENSE_UDI-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message occured due to some reason. This is not a failure, the process can continue functioning as expected.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-FAIL_RACK_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The RACK entry is a must in inventory management. This is the first element in the invntory sysdb hierachy. If the rack is not created we are not proceeding further to create slots.), (Recommended Action: No action needed. Inventory Manager process will restart automatically)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_PLU-1-PLU_RESMON_OOR_YELLOW
### Response:
(Severity: 1), (Category: PLATFORM), (Description: PLU resmon on the node has detected that the number of routes has exceeded prescribed limits. Any further increase routes will lead to traffic loss.), (Recommended Action: Take immediate action to delete routes from the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-HOST_KERNEL_CORE_DUMP
### Response:
(Severity: 3), (Category: DRIVER), (Description: HOST has reported a kernel core dump event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-SLICE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. Slice failure: Slice failure affecting all slices and no slice is powered UP.), (Recommended Action: System is not usuable. Power failure happened during system boot. Need to reload the board for recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-DATAARRAYLENGTH
### Response:
(Severity: 7), (Category: MGBL), (Description: The number of elements entered for a data array does not match the expected value.), (Recommended Action: Use the classinfo command to get more information about the naming or value information of a class. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-2-MSG_PRIMARY_GLARE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: There appear to be two PRIMARY RP's in the system.), (Recommended Action: None; the node which has arbitrated for the least time will be reset.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-3-BAG_ENCODE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: An internal error was detected when trying to encode a SysDB Bag.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MCAST_EDM-7-EDM_REGISTER_FAILURE
### Response:
(Severity: 7), (Category: ROUTING), (Description: The VIKING-MCAST library encountered internal error during SysDB/EDM init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GNSS-4-SHUTDOWN_CHECK_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: GNSS Manager could not determine whether all GNSS configuration has been removed and so cannot exit safetly. GNSS Manager may be running despite no GNSS configuration existing.), (Recommended Action: No action is required. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NIRVANA-2-S8_POWER_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The Satori-8 RP did not power up fully.), (Recommended Action: power-on reload Satori-8 RP. consider RMA Satori-8 RP if issue persists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-6-DOCKER_DAEMON_STARTED
### Response:
(Severity: 6), (Category: INFRA), (Description: Docker daemon has started. Docker related functionalities will now be available.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in the event loop. Cause of the error will be mentioned in the message displayed. The error could result in Brahmos PLIM driver process to be in inconsistent state.), (Recommended Action: Restart the plim_services process (process restart plim_services location <>) If the issue persists, do a cold reboot Services PLIM MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN-7-SHMWIN_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: SHMWIN encountered an unexpected condition and return error code to the calling process), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_DISCOVERY_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process timed out while waiting for the switch PCIe device to come online. In order to recover, ESD will reset the switch, then exit so that it can be restarted by the process manager and attempt to discover the switch PCIe device again.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet', and 'show controllers switch trace' commands. Also collect the OS kernel logs. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How have network applications and traffic evolved since the early days of data networking?
### Response:
Since the 1980s, network applications have expanded dramatically to include video conferencing, instant messaging, IPTV, telepresence, telemedicine, peer-to-peer sharing, video surveillance, online banking, online shopping and countless others. Internet users have grown from 16 million in 1995 to 1.46 billion in 2008, with a corresponding increase in per-user bandwidth consumption.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-TEMP_TOO_HIGH_1
### Response:
(Severity: 1), (Category: FABRIC), (Description: Crossbar fabric interface ASIC-1 is reporting a very high temperature.), (Recommended Action: Check if board is reporting temperature alarm. If not, it is due to Crossbar fabric interface heatsink not being installed properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-CCC_PON_INCOMPATIBLE
### Response:
(Severity: 3), (Category: INFRA), (Description: The CCC PON version must be upgraded. Else black VLAN translation will not work properly in all situations. Also ESD initiated switch resets will not work), (Recommended Action: Must upgrade CCC PON.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-PAK_PROC_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: There was an packet processing error. Possible causes 1) Unable to retrieve dest nodeid from inside the pkt 2) Error setting/getting input ifh from pkt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How is MPLS Traffic Engineering (TE) configured in Cisco IOS XR?
### Response:
MPLS TE is enabled globally using the 'mpls traffic-eng' command in global configuration mode. TE tunnels are configured using the 'interface tunnel-te' command. Various TE attributes such as bandwidth, priority, and path options are configured under the tunnel interface. The 'autoroute announce' command is used to enable the tunnel to be used for forwarding traffic.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_VCCLASS-3-PRODUCER_DATA
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred in the ATM VCCLASS producer while preparing the vcclass data to be sent to ENS.Inernal failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FT-3-FAN_PLUGIN_INIT_FAILED
### Response:
(Severity: 3), (Category: LIBRARY), (Description: Fan plugin initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_IO-4-UNKNOWN_MESSAGE
### Response:
(Severity: 4), (Category: IP), (Description: The IPV4_IO process has received an unknown event message.), (Recommended Action: This message indicates that the ipv4_io process has received a message type that it wasn't expecting. This message has been ignored and no further action needs to be taken. The message may have been sent to this process by mistake or if any installs have taken place there may be a version mismatch between the server and a client. On its own this message does not indicate a problem. If other problems are seen then include this error in the report.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-5-RESERVED_HELLO
### Response:
(Severity: 5), (Category: ROUTING), (Description: PIM reserved type hello message received.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-EXTERNALERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An external software error occurred. This is a non-OSPFv3 errors triggered from external DLLS, libraries, or inter-process calls.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
sIMP-3-FATAL_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software fatal error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-3-IARM_UPDATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured when registering to IARM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace events<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace events<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSU_DIR-3-NTFN_CLIENT_UNREGISTERED
### Response:
(Severity: 3), (Category: INFRA), (Description: ISSU director received a message from a notifications client, but that client has not registered. The received message is dropped and not handled by ISSU director.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-DAEMON_ERR_SYSDB_REG_VERIFY
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while using SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-7-MSG_READ_STALL
### Response:
(Severity: 7), (Category: OS), (Description: No data reads has been done by bcdl_agent from producer on a child subgroup for the specified time.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-MISS_EOP_0_XAUI_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from XAUI on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-6-REPLACE_ABORTED
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Package replace requested on this satellite has been aborted, as requested by the user. Run 'show nv satellite status' for more information about the current state of the satellite.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-ENCODE_NET_OVERRUN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Encoding the net has overrun the msg buffer. It may corrupt some memory.), (Recommended Action: This warning indicates possible memory overrun.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AFMON-3-MAX_FLOW_LIMIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Software enforces a limit of 1.5 times the maximum number of flows permitted on a LC. When this limit is reached, no more new flows can be added unless the current flow count comes under the limit), (Recommended Action: Reduce the number of flows in the LC If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-FIFO_0_OFLOW_NPU2BR_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: FIFO-0 NPU to bridge instance-0 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-LABEL_COLLISION
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_MPLS_EA-3-ERR_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CFG_MP_CREATE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to create new Maintenance Points and retrying the operation has not resolved the problem. This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some Maintenance Points will not have been created.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AMT-3-EVM
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET-4-INITIALIZATION
### Response:
(Severity: 4), (Category: L2), (Description: A error occurred during the initialization of the common Ethernet driver library.), (Recommended Action: The driver process is restarted automatically, hence no user intervention should be required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SYNC_FAIL
### Response:
(Severity: 4), (Category: SYSDB), (Description: The error code shown was received during replicating sysdb data to other nodes in the system.), (Recommended Action: This error could be transient error and may not repeat frequently. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-7-CERT_TIMER
### Response:
(Severity: 7), (Category: SECURITY), (Description: Cerficate with invalid attribute.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-1-STANDBY_NOT_READY
### Response:
(Severity: 1), (Category: HA), (Description: Redcon has determined that the standby card is NOT ready because of the failure of one or more events the prevent it from being in-sync with the active card.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-INCORRECT_IDB
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Forwarder was supplied with a plim interface that does not have an idb yet.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-GENERAL_ERROR
### Response:
(Severity: 3), (Category: FABRIC), (Description: A general major error occurred. The explanation is in the message itself.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_A_DATABUS_STUCK_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI-A databus stuck on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-MEM_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RESERVED_CONFIG
### Response:
(Severity: 4), (Category: ROUTING), (Description: PIM DR priority value configured is reserved for Sticky DR), (Recommended Action: CONFIGURE A VALUE LESS THAN 4294967294 FOR DR PRIORITY)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to monitor RSVP TE tunnels bandwidth in Cisco IOS XR?
### Response:
To monitor RSVP TE tunnels bandwidth, use the 'show mpls traffic-eng tunnels bandwidth' command in EXEC mode. RP/0/RSP0/CPU0:router#show mpls traffic-eng tunnels bandwidth
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-MACSEC_POWER_STATUS
### Response:
(Severity: 5), (Category: L2), (Description: MACsec power budgeting allows each port to check for the power availability from envmon before enabling the MACsec mode on the port. MKA session bringup would happen only after the successful power allocation. Power would be released after disabling the MACsec mode either by removing the macsec config from the interface or by configuring global macsec shutdown.), (Recommended Action: No action required (normal operation).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_ICPE_EA_DEBUG-6-REGISTER_FAILED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform ICPE EA component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_15_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_ATM_V2-7-DEBUG
### Response:
(Severity: 7), (Category: L2), (Description: ATM SPA OC3/OC12 debug message), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BMP-4-ERR_ADJ_DLL_INIT
### Response:
(Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-4-ERR_ECM_NOTIFY
### Response:
(Severity: 4), (Category: FABRIC), (Description: The Fabric driver was unable register with ECM to receive notifications when the connection to Sysdb goes down/up/closed. Fabric driver and the System should continue to function as normal, with the exception that the 'show' commands for Fabric driver will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-ROLLBACK_FAIL
### Response:
(Severity: 2), (Category: PLATFORM), (Description: TCAM programming encounters error and rollback fails. This is a double fault condition. Traffic mis-classification or loss may occur.), (Recommended Action: Reboot the LC. If problem persist this may indicate HW issue. Call your next level support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-6-CBC_REFRESH_PWR_SEQ_COMPLETED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: CBC detected there there is a CRC check failure in the power sequencers on this card and reprogrammed the sequencers in error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-3-SAC0_ECTW_RDATA_ACKERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_SSE-3-ERR_AIB_INIT
### Response:
(Severity: 3), (Category: L2), (Description: BFD SSE was unable to setup the cwconnection to AIB for processing adjcency changes events. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will reload the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-UPGRADE_PROV_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot do FPD upgrade when Provisioning is in progress. Upgrade to be initiated again after provisioning), (Recommended Action: Issue FPD upgrade command again once provisioning is completed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP_POLICY-3-ORA_RUN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-CFG_ATTR_UPDATE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: CFM was unable to update internal state following a change to an interface attribute on a group of interfaces.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
STREE-4-CREATE_FAIL
### Response:
(Severity: 4), (Category: L2), (Description: stp_process ran into errors while creating the spanning tree instance for control ethernet. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.), (Recommended Action: Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-HSSD_REGISTER_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS failed to register for an HSSD area. This is an internal error.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
WD_STAT_PUB-3-SHM_ERR
### Response:
(Severity: 3), (Category: HA), (Description: A shared memory for statistics area might be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_JBI-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message from the FPGA upgrade facilitator), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFR_EA-3-MEMBER_CAPS_REMOVE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to remove caps.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD-3-DEBUG
### Response:
(Severity: 3), (Category: HA), (Description: this traceback is for debug - ignore), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-UPGRADE_AFFECT_TRAFFIC
### Response:
(Severity: 5), (Category: ROUTING), (Description: Most likely some one tried to upgrade/downgrade mfwd while we're not connected to NetIO. In this case, teh upgrade will wipe out all MFIB and traffic will be disrupted), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKI-3-CERT_VERIFY_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: CEPKI certificate verification error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: OS), (Description: The NETIO encountered a problem of a generic nature or an information message.), (Recommended Action: Restarting netio may fix the issue.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_ALLOC_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-3-ERR_INIT_FATAL
### Response:
(Severity: 3), (Category: L2), (Description: BFD proc SM action handler failed to execute and the FSM will be reset.), (Recommended Action: Restart corresponding bfd process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_OPERATION_USER_ABORTED
### Response:
(Severity: 6), (Category: INSTALL), (Description: An install operation was aborted by a user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_CHOC_DSX-3-HDLC_ERR_CHNL_QUE_OV_STAT
### Response:
(Severity: 3), (Category: L2), (Description: The SPA driver detected an error event on the HDLC Controller), (Recommended Action: The SPA driver has encountered an error event on the SPA card. If the condition persists, copy the error message exactly as it appears. Next research and attempt to resolve the issue using the SPA hardware troubleshooting documentation as well as the tools and utilities provided at http://www.cisco.com/public/support/tac/tools.shtml. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl or contact your Cisco technical support representative. Be sure to provide the the information you have gathered and a 'show tech-support' to your support representative, or attach it to your case in non-zipped, plain text format (.txt).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-4-INIT_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_MA-3-LCFG_UPDATE
### Response:
(Severity: 3), (Category: SERVICES), (Description: An error has occurred while implementing the diversion required for the given service attachment. The error string will give more detail on the type of error that has occurred.), (Recommended Action: For non-resource errors, removing and adding back the configuration that prompted the message may remove the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is a resource error this will be indicated in the error description given. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If any inconsistency in packet forwarding to the indicated interfaces is seen, a restart of RSPP MA may solve the problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-4-QFP_FAILURE_SPA_BRIDGE_PRESENCE
### Response:
(Severity: 4), (Category: L2), (Description: The line card initialization sequence failed to discover a SPA bridge controller), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers QFPCPUBridge trace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ABF_NH_UPDATE_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: ACL Based Forwarding Nexthop state update failed.), (Recommended Action: Remove ACE from ACL and re-apply.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCC-2-BAD_ID_HW
### Response:
(Severity: 2), (Category: PLATFORM), (Description: 'Hardware in the specified location could not be identified as a genuine Cisco product'), (Recommended Action: 'Contact TAC')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPFPGA-3-PCIE_ACCESS_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCI access Failure/Success while accessing device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-QDR_MEM_SELFTEST_FAIL_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: QDR memory self test failure on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. Please verify the bridge FPGA is loaded properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-BUNDLE_STATE_CHANGE
### Response:
(Severity: 3), (Category: FABRIC), (Description: Bundle state change in FSDB aggregator.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-SYSDB_CFG_UNBIND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that unbind to config namespace in SysDB has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTQ0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM-6-DEBUG_REG
### Response:
(Severity: 6), (Category: L2), (Description: Debug message registration failed The component will be functional with a sole impact that its debugging will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_LTRACE-3-ERR_INFO_VERBOSE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An internal error occurred in FIB engine layer for collecting traces. The message string indicates the reason for the failure. This message also provides an error code. Additionally, it provides a more verbose information of the error.), (Recommended Action: This message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-3-GLOBAL_MUTEX_ERR
### Response:
(Severity: 3), (Category: OS), (Description: Global mutex lock/unlock failure has occurred for shmwins open/close operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Capture - show shmwin trace server location 0/x/CPUx - show shmwin trace all location 0/x/CPUx - dumpcore running shmwin_svr location 0/x/CPUx)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure an L2VPN VPLS bridge domain?
### Response:
To configure an L2VPN VPLS bridge domain, use the 'l2vpn' and 'bridge-domain' commands in global configuration mode. l2vpn
bridge-domain BD1
vfi BD1-VFI
vpn id 100
neighbor 10.1.1.2 encapsulation mpls
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBIPV6PROTO-3-FSV_WRITE_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: The packet FSV resources are busy and a packet FSV could not be written. It is a transient error and it could happen in a heavy loaded system.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-CCM_PARSE_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: An error occurred while processing a received CCM message - the error string gives more details. This error is not caused by malformed or invalid packets. If the error persists, CFM may not operate correctly.), (Recommended Action: If the error persists, it may be cleared by restarting the cfmd process on the node where the error is occurring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: OS), (Description: The system failed to allocate memory. It's likely that the system is running low in memory.), (Recommended Action: When this issue happens, it will trigger an automatic restart. This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_EVENT_CONN_EVM_HANDLER
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for the posix message queue. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAIPC_NETIO-7-CAPS_BAD_CHAIN_TYPE
### Response:
(Severity: 7), (Category: OS), (Description: qnetcaps_builder_func() called with wrong chain type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_BASIC-7-WARNING
### Response:
(Severity: 7), (Category: HA), (Description: This provides information about non-error conditions which may even be expected under certain circumstances. Nevertheless, these are not considered 'desirable' conditions.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp graceful-restart stalepath-time' command in IOS XR BGP configuration?
### Response:
The 'bgp graceful-restart stalepath-time' command is used to configure the maximum time that a BGP speaker will hold onto the stale routes of a restarting peer. It is part of the BGP Graceful Restart configuration. The default stalepath time is 360 seconds. After this time, if the restarting peer has not come back up, the stale routes are removed from the routing table.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
orrspf-4-LTRACE_ERR
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-NSR_SYNC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error occurred during the NSR sync between active and standby OSPFv3 processes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show tech-support routing ospfv3 detail)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_QOSEA-3-FAILURE_DURING_MODIFY
### Response:
(Severity: 3), (Category: QOS), (Description: QoS EA encountered an error when modifying the policy on an interface. Neither the old policy nor the new policy is applied in hardware for this interface.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-HOT_STANDBY_OUT_OF_SYNC
### Response:
(Severity: 3), (Category: LICENSE), (Description: Smart Licensing Agent on the hot standby failed to process the data necessary to stay in sync with the active agent. If a switchover occurs the the new active agent will not be in the same state as the current active agent Configuration does not match the value of the enable flag in Trusted Store. This can happen if a configuration is copied onto the system and a reload occurs. If the new configuration does not contain the Smart Licensing Enable command, the value in Trusted Store will not match.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure RSVP message pacing?
### Response:
To configure RSVP message pacing, use the 'rsvp message-pacing' command in global configuration mode. RP/0/RSP0/CPU0:router(config)#rsvp message-pacing
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-BAD_VSA_FORMAT_BIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Format bit is not set for VSA %s according to table bitmap.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-1-ALT
### Response:
(Severity: 1), (Category: OS), (Description: An ALERT level message was emitted by QNET.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-SRVR_IPC_INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: IPC server initialization failed.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_EDM-3-SYSDB_BIND_FAILED
### Response:
(Severity: 3), (Category: IP), (Description: Failed to connect to SysDB while starting the indicated subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCMCIA-3-PCI_SVR_ATTACH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PCI must be attached before using any other APIs. PCMCIA driver unable to attach to PCI bus. PCI_SVR_ATTACH_FAIL occurs when there is no PCI card.), (Recommended Action: If the PCI card is missing, insert the card. If it is already present, remove & re-insert (OIR) the card')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_LCO-5-SATELLITE_PORT_STATUS
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: The configuration conflict status for a satellite access port interface has changed.), (Recommended Action: If the status change was unexepcted, run 'show nv satellite status' to display the current status.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-INT_MBE
### Response:
(Severity: 0), (Category: PLATFORM), (Description: QFP-CPU Bridge detected a multi-bit memory error (MBE).), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_LOCAL-3-MALLOC_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The system might be running low on memory and adequate amount of memory was not available to complete the request), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_0_HQ_FULL_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 0 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_WDSYSMON_REGISTER
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-SLOT_INSERTION_THRESHOLD_A
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Backplane slot connector has card insertions exceed threshold A per current counter statistics.), (Recommended Action: Give CLI: (admin)# show plugin slot counts If possible, reduce the frequency of card insertions into this backplane connector. Current insertion counters may be cleared with (admin)# clear plugin slot counts)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ether_spa_dwdm-3-MALLOC_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The SPA driver detected a memory error on the SPA card. The Error has occurred because the requested amount of memory is not available.), (Recommended Action: Reload SPA/LC. If the issue persists even after reload collect the output of below CLIs and contact TAC. 1. 'show processes cpu location <>/<>/<>' 2. 'show memory')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLIB_NSR_LIB-3-INIT_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred during initialization), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-AUTOGEN_CHASSIS_MAC_ADDR
### Response:
(Severity: 4), (Category: DRIVER), (Description: On prototype chassis, the backplane IDPROM might not have the right number of MAC address programmed, so the card manager is trying to workaround this problem by auto-generating the required number of MAC addresses based on the programmed chassis serial number.), (Recommended Action: None. This problem should not happen on production chassis)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-6-CLEAR_CMD
### Response:
(Severity: 6), (Category: IP), (Description: 'A LISP clear command resulted in no action, reason shown'), (Recommended Action: 'Ensure that the clear arguments provided cover state to clear.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_DLL-3-ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Null Driver partner encountered a error and is not able recover from the error. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_MAC_SESSION_LIMIT_REACHED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address has reached the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_SYSDB_BAG_DECODE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XBAR-5-ERR_CONT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates an error occurred beyond which execution of the sc_driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-5-ERR_ASIC_SBE
### Response:
(Severity: 5), (Category: FABRIC), (Description: Ingressq encountered a single bit error in the mentioned block. Persistent errors are corrected by the software. Non-persistent errors are automatically corrected by the next write operation.), (Recommended Action: This error is an correctable error. There are no side effects. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cpuctrl manager encountered a fatal error and is not able to recover from the error. A reason text will be supplied; please provide this text when calling Cisco support. %s - error description %s - error code description), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-3-ERR_DUPLICATE_IPV4_ADDRESS
### Response:
(Severity: 3), (Category: L2), (Description: The IPv4 address assigned to this subscriber interface matches the address for an existing route in the RIB. ECMP is not supported for subscriber interfaces, so this duplicate address causes the subscriber session to be disconnected. The most likely reason for this is that another subscriber session is using the same IPv4 address - but it is also possible that a non-subscriber route is using the same IPv4 address.), (Recommended Action: Check both local and Radius configuration for this subscriber)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COHERENT-3-CTP2_HW_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Optics Pluggable Failed), (Recommended Action: Remove the pluggable and check)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SDT_SHOW-7-STR_CALLOC
### Response:
(Severity: 7), (Category: OS), (Description: The show decode helper library breaks up string data for mesasages into single trace buffers and reassembles them. There was not enough memory to create the string space to hold the data. Any trace using this string may not be printable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_SW-4-ERR_DEBUG_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The IPv6 NetIO component encountered an error during debug initialisation), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPP_TCAM_RM-6-INFO_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the CPP TCAM RM.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-0-LOG_EMERG_OWNER_PLANE
### Response:
(Severity: 0), (Category: OS), (Description: An emergency owner plane message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-STANDBY_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed to standby init with the above reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZTP-6-PROCESS_RESTART
### Response:
(Severity: 6), (Category: INFRA), (Description: After secure-mode is enabled, ZTP will be restarted to proceed with secure workflow.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPHC_MA-2-CLIENT_INIT
### Response:
(Severity: 2), (Category: L3), (Description: An Error occurred during initialization of process start up. The process will exit and should be restarted by the System Manager which should recover the situation.), (Recommended Action: System will retry to start the process. If not recovered, contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-6-SEQ_STATE_THRESHOLD_EXCEEDED
### Response:
(Severity: 6), (Category: FABRIC), (Description: Ingressq sequencer state threshold exceeded. Driver will wait for operation and retry.), (Recommended Action: No user action is required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LRD_inv-4-CANT_FIND_DSC
### Response:
(Severity: 4), (Category: HA), (Description: LRdlib could not find the designated Shelf Controller.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS-4-LTRACE_INIT_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: An internal error is encountered during ltrace initialization. The fallout of this could be the respective show command to view traces for the transport will not yield any result.), (Recommended Action: Restarting the process might help.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls label range' command in IOS XR?
### Response:
The 'mpls label range' command is used to configure the range of local labels available for allocation by the MPLS protocols. It allows the operator to partition the label space and assign specific label ranges for different MPLS applications such as L3VPN, L2VPN, and MPLS TE.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-HA_ISSUL_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: ISSU Lite returned an unexpected error. The ISSU operation may not behave as expected, and may abort.), (Recommended Action: Check the status of the ISSU operation. The ISSU operation may need to be aborted and retried. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOADPATH-7-FILE_READ_FAIL
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the loadpath infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be read, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_SVR-7-INSTALL
### Response:
(Severity: 7), (Category: OS), (Description: An error has occurred updating the reference table for cerrno error messages. Some cerrno messages may be incorrect or undecodable.), (Recommended Action: A successful restart of the Cerrno Server will result in future messages being decodable.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD_XRV9K-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: L2), (Description: BFD Agent has failed to allocate memory for its resources. This would affect proper functioning of BFD Agent.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-4-ERR_SYSDB_CONN_TO_COID
### Response:
(Severity: 4), (Category: FABRIC), (Description: The FIA driver was unable to become an external data manager (EDM) despite having a connection to SysDB. The operation will be retried.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_HFR-7-ERR_EVENT_CONN_OPEN
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to open connection with event manager. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-6-l2if_stats_oor
### Response:
(Severity: 6), (Category: L2), (Description: L2 stats OOR during l2if creation event), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the lsp-lifetime command in IS-IS?
### Response:
The lsp-lifetime command is used to configure the lifetime of LSPs. By default, the LSP lifetime is 1200 seconds (20 minutes). An LSP is considered expired if it is not refreshed within its lifetime. The LSP lifetime should be greater than the LSP refresh interval to prevent premature expiration of LSPs.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-IDB_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_EA-3-INITFAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of the InterFlex EA process on a particular node. The process will be restarted. Until the process starts successfully, any InterFlex interface pairs located on that node will not come up. (If there is a standby node the interfaces should come up on the standby).), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-MEM_FAIL
### Response:
(Severity: 4), (Category: SYSDB), (Description: Low memory condition.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install deactivate command in IOS XR?
### Response:
The 'install deactivate' command is used to deactivate a previously activated software package. The package remains on the router's storage but is no longer active.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an error during initialization of one of RIP's components.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-STATS_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature EA DLL encountered error on interacting with PRM Stats APIs. Error encountered during performing ace counter related operations e.g., allocation of counter, clearing the counter etc.), (Recommended Action: If this happened during applying acl to the interface the configuration will fail. Please retry the configuration. check status of prm_server process on LC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDEVINFO-3-DBG_CLEANUP
### Response:
(Severity: 3), (Category: MEDIA), (Description: During total cleanup fs_dev_info failed to unregister the debugs.), (Recommended Action: restart process 'fs_dev_info' from exec prompt - from exec prompt 'restart process fs_dev_info' if issue persists contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EOBC-3-PKT_ERRORS_LC1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_CLIENT-3-GEN_ERR_3
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered an Error in operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: QOS), (Description: An error (other than EINTR) occured in the event loop. The process has exited and restarted.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_EA-4-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: An error occured in the event loop. The process will restart which should recover the situation.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_NETIO-3-MEMORY
### Response:
(Severity: 3), (Category: L2), (Description: The DLL has failed to acquire the required amount of memory.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-4-HA_WARN
### Response:
(Severity: 4), (Category: PLATFORM), (Description: HA test warning.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_INTERNAL
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an internal software error. (e.g., timer service error or system call errors) This software error will cause process termination to recover. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-BOOT_REQUEST_TIMER_EXPIRED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that Shelf Manager did not receive boot requests within the alotted time from the given node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-3-NOTIFD_RECOVERY_RESTART
### Response:
(Severity: 3), (Category: INFRA), (Description: The Notification Daemon server has hit a fatal error and will restart in order to recover.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-ASIC_RESET_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: While trying to bring up ASIC links, Cpuctrl manager could not reset MSC and PLIM board ASICs port.), (Recommended Action: reload the board)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-6-TIMEOUT_EDM
### Response:
(Severity: 6), (Category: SYSDB), (Description: A timeout occured whilst processing a request.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-4-HARDWARE_ERROR
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Detected hardware error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-6-CRYPTO_TUNNEL_STATUS
### Response:
(Severity: 6), (Category: SECURITY), (Description: Report tunnel status.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ_DLL-3-ERR_FABRICQ_SYNC_TIMEOUT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The ingressq driver needs to be in sync with the fabricq driver, so that both the ASICs go for halt together, and also come out of halt state in synchronous manner. This error indicates that the fabricq driver went out of sync with the ingressq driver. This will result in card reload and consequent traffic drops.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-NETD_OVERFLOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Network Processor has detected a NETD overflow error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-2-FAILED_RELOAD_NODE
### Response:
(Severity: 2), (Category: INSTALL), (Description: The installation required a reload of the node, but the reload failed. This is a critical error, as the software installed will now be in an inconsistent state. No future installations will work correctly, and process restarts can not be guaranteed to be successful.), (Recommended Action: Execute the command 'hw-module location <location> reload' for the specified node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE1_CODE_ERR_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE1_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EINT_NETIO_DLL-3-SET_INPUT_IF_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: While processing an ingress packet, the eint driver failed to set input interface), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO_API-3-LTRACE_BUFF_CREATE_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Trace buff create failed.' 'Tracing will not be functioning properly.' 'Process will proceed running.'), (Recommended Action: 'Process restart can solve this issue.' 'If proplem exists even after process restart,' 'please collect the error log with return value' 'and core dump of the process.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-3-LOAD_BALANCE_LINK_DOWN
### Response:
(Severity: 3), (Category: FABRIC), (Description: When a 8.625G S2TX link go down, Link load balancing bring down the paired S2TX link, and two 8.625G S2RX links per CRS-X LCC rack.), (Recommended Action: Collect- (1) All the event logs (2) admin show tech fabric fast-snap (3) admin show controllers sfe link-info rx 0 127 topo instance <instance> location <SM Location> (4) admin show controllers sfe link-info tx 0 128 instance <instance> location <SM Location>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-TX_FF_OVF_ERR_FIA00
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA00 Tx burst FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_INST_ID
### Response:
(Severity: 3), (Category: ROUTING), (Description: Instance ID is invalid), (Recommended Action: This warnning will show up for possible out of order sysdb notification)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_PORT_DOWN
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process detected that port on the indicated switch moved to down state. When this occurs, the switch is in an indeterminate state, and its packet processing functionality is disabled. In order to recover, the ESD process does port recovery, if that fails, then it resets the switch, then exits so that it is restarted by the process manager.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TXLIB-3-ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred in the library used for messaging between components. The message is generated from the context of the process sending or receiving a message at the time the error occurred, but is internal to the library.), (Recommended Action: RECUR)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCRIPT_MGMT-0-EMERGENCY
### Response:
(Severity: 0), (Category: OS), (Description: System unstable.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure split horizon for an L2VPN bridge domain?
### Response:
To configure split horizon for an L2VPN bridge domain, use the 'split-horizon group' command within the bridge-domain configuration. l2vpn
bridge-domain BD1
split-horizon group 1
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERG-4-SLAVE_UPD_FAIL
### Response:
(Severity: 4), (Category: INFRA), (Description: There is some mis-configuration or discrepancy likely between master and slave box due to which session are not getting established on the slave despite retries.), (Recommended Action: Please fix the error/inconsistency between the routers and issue 'session redundancy synchronize' command to get sessions back in sync.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-CPU_HOG_3
### Response:
(Severity: 6), (Category: HA), (Description: Wdsysmon has detected a cpu starvation situation - potentially a high priority process spinning in a tight loop. A high value for the rolling average indicates that a periodic process is not being scheduled.), (Recommended Action: Check the system status, including the saved log for evidence of a high priority cpu hog.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PTP-4-IP_ARM
### Response:
(Severity: 4), (Category: L2), (Description: PTP encountered an error using the IP-ARM API. The error message describes what operation failed. This may be a resource starvation problem or an internal programming error.), (Recommended Action: Restart the local ipv4_ma process and/or the ptp_ma process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-7-CHKPT_TBL_RECOVER
### Response:
(Severity: 7), (Category: SERVICES), (Description: Failed to recover a checkpointed table.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-3-ECC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Network Processor experienced a bit error in NP memory. This may be a parity error, a single bit ECC, or a double bit ECC.), (Recommended Action: Call your next level support. ECC could be an indication of a hardware problem.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How is MP-BGP configured for L3VPNs in Cisco IOS XR?
### Response:
MP-BGP is configured under the BGP configuration mode. The 'address-family vpnv4 unicast' command is used to enter the VPNv4 address family configuration mode. The 'neighbor' command is used to specify the BGP neighbors and the 'activate' command is used to enable the exchange of VPNv4 routes with the neighbors. The 'route-policy' command is used to apply import and export policies for VPNv4 routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-SETENV_FAILED
### Response:
(Severity: 3), (Category: MGBL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_REPROG_RESOURCE_THRESH
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error has occured and cause reprogram resource, such error has crossed threshold.), (Recommended Action: Errors that cause reprogram resource have happened and exceed threshold. This has been handled.Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA_DRVR-3-ERR_MSGQ_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver failed to create a message queue used for inter-thread communication during the driver initialization.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-2-CHECK_COUNTDOWN_EXIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Warning the user that drp reddrv has checked both install reload phase, and fabric connectivity. None of the above conditions check returns TRUE so that the drp reddrv will follow its normal routine to handle the case where countdown counter reaches zero), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-MDMA_IDLE_BIT_FAILURE
### Response:
(Severity: 2), (Category: L2), (Description: The NPU driver was unable to get the idle bit from the MDMA status register and must trigger a node bringdown to effect recovery.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different types of regular expressions used in BGP filtering?
### Response:
The main regular expression types used in BGP filtering are\n- Asterisk (*) - Matches any single character\n- Period (.) - Matches any single character\n- Plus (+) - Matches one or more occurrences of the previous character\n- Question mark (?) - Matches zero or one occurrence of the previous character\n- Caret (^) - Matches the beginning of the input string\n- Dollar sign ($) - Matches the end of the input string\n- Underscore (_) - Matches a comma, left brace, right brace, left parenthesis, right parenthesis, the beginning of the input string, the end of the input string, or a space\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGV6_SERVICES-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A fatal error occurred in the cgv6 services process which involves exiting the process.), (Recommended Action: collect the info from 'show diag', 'show platform', 'show inv')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-4-SWITCHOVER_DATA_LOST
### Response:
(Severity: 4), (Category: INSTALL), (Description: After switching over, the data w.r.t the switchover are not available. This could be due to data loss or unplanned switchover. The install manager detects this condition and also finds it may continue.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SQUID_LOADER-5-progress
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Output progress to RP console.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_INSUFFICIENT_BW
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface, with the specified LSP Id, cannot be setup \ or reoptimized because of insufficient bandwidth. The first argument \ is the tunnel name and the last argument is 'setup' or 'reoptimize'. \ LSP Id will be always 0 (zero), if failure happens during setup time.), (Recommended Action: None. This is a solicited message (by \ 'logging events lsp-status insufficient-bandwidth' \ interface configuration). User may verify reservable bandwidth on link as \ shown in the output of 'show mpls traffic-eng link-management bandwidth-allocation'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-PROC_EXIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: A fatal error occurred during initialization of an LDP subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_4_LOW_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROULETTE-6-RP_ISOLATION_RESET_REQ
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that RP Isolation is in force, CPU reset request for the target slot is ignored.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-MPA_ACT2_IDENT_FAILED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Hardware in the specified location could not be verified as a genuine Cisco product.), (Recommended Action: Please copy the error message exactly as it appears on the screen and gather the output of CLIs 'show diag <lc> eeprom-info', 'show tech-support ethernet interfaces'. Please ensure that the line card daughter board card type, board PID and serial number are not modified. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_PWM_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PWM bit level decoder error on decoder A on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-3-GS_VECTOR_INIT_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: RDS Library hit an internal error. The internal error may be due to invalid memory access or corrupt memory.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-NP_PON_RESET
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The host CPU on the line card has detected a fatal non-recoverable error on one of the network processors. The line card must be reloaded to reset the network processors in order to recover from this error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-3-EVENT_MANAGER
### Response:
(Severity: 3), (Category: OS), (Description: A call to an event manager interface failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-INIT_MALLOC_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Memory allocation failed while applying encapsulation config. This failure is due to exhaustion of system memory resources.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-INCOMPATIBLE_FC_FOR_CHASSIS
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This FC type is not supported in this chassis type for the ASR9K family of chassis as it is incompatible to the chassis hardware architecture for traffic carrying purposes. Shelf manager raises this alarm when it detects the presence of the incompatible FC and clears the alarm when the FC is no longer seen as being present.), (Recommended Action: Please remove this FC from the chassis and replace it with another FC type which is supported in the chassis according to the Cisco user documentation. If you have questions, please contact your Cisco technical representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What synchronization mechanisms are provided by the IOS XR microkernel?
### Response:
The IOS XR microkernel provides the following synchronization mechanisms\n- Mutex (mutual exclusion) locks: Ensures exclusive access to shared data by threads\n- Condition variables: Allows threads to wait until a condition is met\n- Semaphores: Allows threads to wait for a shared counter to become positive\n- Atomic operations: Allows simple operations on shared data without locks\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_SYSTEM_ERROR_SPECIFIC_NODES_HDR
### Response:
(Severity: 3), (Category: INSTALL), (Description: A system error occurred within the install system, not during an install operation. This may indicate a transitive problem within the system or a problem with the code.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repair' if anomalies are found. If the problem persists collect diagnostic information about the failure using the specific command and pass it to your TAC representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_13_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMA-4-ALARM
### Response:
(Severity: 4), (Category: L2), (Description: The specified IMA Alarm has been declared or released.), (Recommended Action: Recommended action is to repair the source of the alarm.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPv4-2-TRANS_ERR
### Response:
(Severity: 2), (Category: IP), (Description: There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-RPF_REDIRECT_HAS_BW
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TRM-3-DLL_INIT
### Response:
(Severity: 3), (Category: L2), (Description: The initialization of the TRM DLL failed due to the indicated reason.), (Recommended Action: None. The initialization will be retried automatically.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISTRIB_LIB-7-FUNCTION_DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: 'Failure in function call.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-MISC_DISK1_NOT_FOUND
### Response:
(Severity: 3), (Category: INFRA), (Description: Install manager is spawned but /misc/disk1 directory do not exists on this node. /misc/disk1 is mandatory to execute this process.), (Recommended Action: The reason for this failure has to be analyzed. Collect the show tech logs by running 'show tech-support install', 'show tech-support os' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLDP-5-DISABLED
### Response:
(Severity: 5), (Category: ROUTING), (Description: MLDP has been disabled by configuration.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBIMGR-3-IGNORING_MBI
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The MBI passed was not in the expected form. The MBI infrastructure will ignore this MBI and most likely new MBI will be downloaded from dSC as result. %s - gives the MBI path we're ignoring. %s - indicates the node on which the error occurred. %s - gives the error message.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_3_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_3 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPU_CTRL-3-PROG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The system has encountered an error while loading FPGA.), (Recommended Action: Upgrade FPGA using CLI command in admin mode -upgrade hw-module fpd <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T3E3-2-NOMEM
### Response:
(Severity: 2), (Category: L2), (Description: The process is out of memory.), (Recommended Action: Check process list for source of memory loss. Check if h/w memory requirements are met.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC_API-7-ERR
### Response:
(Severity: 7), (Category: L2), (Description: BAMBI API generated errors.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PQMON-6-QUEUE_DROP
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: A producer process was unable to produce into a software queue because the queue was full. This typically means that the owning process is blocked or CPU is under heavy stress.), (Recommended Action: These messages are for the purpose of proactively alerting the operator to any potential issues that may arise from tail drops on the software queues. If no impact (such as routing protocol flaps or traffic loss) is seen, these messages can be ignored.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of performing an 'install audit' in IOS XR?
### Response:
The `install audit` command is used to compare the currently active software set against the committed software set. It helps identify any discrepancies or mismatches between the two. An audit is useful to ensure the active and committed software are in sync before performing a router reload.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different logging destinations available in Cisco IOS XR?
### Response:
Cisco IOS XR supports various logging destinations, including console, terminal lines, log buffer, remote syslog servers, and SNMP traps. Each destination can be configured with different severity levels and message categories.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_HW-2-INIT_ERR
### Response:
(Severity: 2), (Category: ROUTING), (Description: An error has occurred during initialization. This may either be due to low memory or a software defect. Please collect the appropriate traces.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-MSGREADV
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to MsgReadv failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPHC_MA-6-INFO
### Response:
(Severity: 6), (Category: L3), (Description: printing the iphc ma info.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-3-NO_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: System is running out of memory. This message will be for debug only. The out of memory situation will have other bad effects upon the router.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Capture the running core of cardmgrd and 'show memory <jid_of_cardmgrd>' Try Process restart the problem process cardmgrd to recover the memory)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_OP_RETRY_THRESHOLD
### Response:
(Severity: 4), (Category: L2), (Description: After attempting to resend or query information a number of times for a set of objects, the retry threshold has been exceeded and no more attempts will be made for any in this set. The effect of the message will therefore be lost. The impact will depend on the message which was lost, but the error will give an indication as to the failure. Further information may also be found in <CmdBold>show bundle<noCmdBold>.), (Recommended Action: Check that the item(s) still exist. Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_EVQ_DEQUEUE
### Response:
(Severity: 4), (Category: L2), (Description: This is an unexpected error. The PPP MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-RSI_C_API_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The IS-IS process failed to initialize the RSI service for the specified error reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTAGENT-3-SELF_RESTART
### Response:
(Severity: 3), (Category: INSTALL), (Description: Specified install operation in the error message failed.), (Recommended Action: The reason for this install operation has to be analyzed. Please contact Cisco Technical Support and provide the details about the failed install operation and any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-4-APP_OOR
### Response:
(Severity: 4), (Category: ROUTING), (Description: LSD has reached the maximum client limit of 32 apps. Current client registration request cannot be accommodated), (Recommended Action: Expected with scale (large number of MPLS clients). Reduce the number of client instances. Existing clients can be checked with 'show mpls lsd clients')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-INIT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: There was a software error during process startup.), (Recommended Action: The process will restart and try to recover. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart, then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the process does not restart automatically, restart it manually. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-EXEC_SCRIPT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A problem was encountered while trying to spawn a script.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-RIB_BIND_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-3-MSG_ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while handling messages received by locald.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-4-CONFIG_NOT_SAVED
### Response:
(Severity: 4), (Category: LICENSE), (Description: This is for information only. No action is necessary. The customer remains in IN/OUT_OF Compiance state), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBAPI-2-THREAD_CREATE
### Response:
(Severity: 2), (Category: SNMP), (Description: Sonet MIB API had trouble in creating thread.), (Recommended Action: File a DDTS If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-FATAL_ERROR
### Response:
(Severity: 3), (Category: INFRA), (Description: A fatal error in processing occurred. The reason for the error is given.), (Recommended Action: Root cause analysis of fatal error needs to be done.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-7-MSG_STALL
### Response:
(Severity: 7), (Category: OS), (Description: The consumer has not received data msg on the child group for sometime.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_INFRA-7-INTERFACE_CHECK_FAILURE
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: During initialisation, it was not possible to check some interface information (for the specified reason). This should have no impact on functionality and is for debug purposes during startup.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-4-LICENSE_RMA_EXPIRED
### Response:
(Severity: 4), (Category: LICENSE), (Description: Licenses for the specified feature which were installed using the given chassis serial number have been removed due to the chassis having been disconnected from the system. This message appears even if the removed licenses were not active.), (Recommended Action: If removed licenses were active, obtain new licenses for one of the currently available chassis serial numbers. Available serial numbers can be checked with the 'show license udi' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-6-NODE_DISCOVERY
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Shelf Manager node discovery complete.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to verify RSVP configuration on Cisco IOS XR?
### Response:
To verify RSVP configuration, use the 'show rsvp interface' command in EXEC mode. RP/0/RSP0/CPU0:router#show rsvp interface
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the spf-interval command in IS-IS?
### Response:
The spf-interval command is used to configure the minimum interval between consecutive SPF calculations. By default, the SPF interval is 5 seconds. Increasing this interval reduces the CPU load on the router but increases the convergence time after a topology change. The trade-off between CPU utilization and convergence time should be considered.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARDMGR-7-BIND_MTD_REGION_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Bind mtd region failed), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please check the card is a Cisco approved device if it is externally accessible. Capture 'show filesystem <device>' together with console log.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the ispf command in IS-IS?
### Response:
The ispf command is used to enable Incremental SPF (iSPF) computation. iSPF allows the router to recompute only the affected part of the shortest path tree when a topology change occurs, instead of recomputing the entire tree. This can significantly reduce the CPU load and improve convergence time in large networks.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to enable OSPF on a specific interface in IOS XR?
### Response:
To enable OSPF on an interface, specify the OSPF area under the interface configuration using the 'ospf' command. RP/0/RSP0/CPU0:router(config)#router ospf 100
RP/0/RSP0/CPU0:router(config-ospf)#area 0
RP/0/RSP0/CPU0:router(config-ospf-ar)#interface GigabitEthernet0/0/0/0
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FPGALIBRPFPGA-3-FPGA_RP_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates an error occurred due to wrong FPGA RP type.The base address of the FPGA can not be retrieved due to wrong FPGA type as input.), (Recommended Action: When error message is seen ,try restarting the process using the below CLI command in admin mode -show process Use the processid displayed in the error message -process restart <job-id> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-CFG_WARNING
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-OIR_TRANSCEIVER_REMOVED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The optic interface module was removed on the given interface which will result in a link down. The traffic may start getting dropped after this error message), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-PARTICLEINITFAIL
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Packet server was not able to initialize the particles correctly and will restart.), (Recommended Action: If the error is not rectified after two or more restarts, please call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-CONN_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: OSPFv3 was unable to open a connection to a server. This is an internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-LTRACE_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB BRIDGING component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_ILMI-2-SYSDB_MSG
### Response:
(Severity: 2), (Category: L2), (Description: Error in sysdb operation. The datatype sent by sysdb is invalid w.r.t atm_ilmi %s - invalid datatype that we received), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. process restart of atm_ilmi. If that does not recover spa/plim reload.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-4-INIT_LTRACE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The process will continue with it's business, however, cause of why mbi-hello was not able to initialize tracing should be tracked down. As result of this error, mbi-hello will not have any tracings.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB-3-IRB_CERR
### Response:
(Severity: 3), (Category: L2), (Description: This error occurred due to inconsistent IRB (Integrated Routing and Bridging) information being received. This could result in improper routing of protocol between routed interfaces and bridges. This could have happened due to improper configuration of BVI (Bridge Virtual Interface)), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Restart the l2fib process using- process restart l2fib_mgr Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. required_info: Please provide the exact error message seen and output from following commands on the node where the problem occurred: show tech-support l2vpn show mem sum tac_details: An error has occurred in L2FIB manager process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-4-OOR_VRF_BSR_GRANGE_THRESHOLD_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPU-2-DEVICE_ISSU_ROLE_CHANGE_START_NOTIFICATION
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This notification indicates when npu driver has started switching device roles during ISSU run phase.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you set the TURBOBOOT environment variable to boot from disk0
### Response:
To set the TURBOBOOT variable to boot from disk0:, use these ROMMON commands\n```\nrommon B2 > unset BOOT\nrommon B4 > TURBOBOOT=on,disk0\nrommon B5 > sync\n```\nThis assumes the .vm composite image file is present in the disk0:/usr directory.\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_SRVR-7-ERR_DEBUG_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: The Fabric driver was unable to register with the debug. The System Manager process (sysmgr) will automatically respawn this (sfe_drvr) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPL-3-PAK_OPERATION_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: The specified operation failed on the packet.), (Recommended Action: Collect the information specified in the required_info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-CPP_PKT_PROT_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: IBS from CPP packet SPI protocol error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_EM-7-FMS_ASYNC_ATTACH_FD
### Response:
(Severity: 7), (Category: HA), (Description: The event_pulse_attach_event function reported an error trying to attach to handle the Event Detector handler pulse code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-EVM_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS encountered errors during initialization.), (Recommended Action: CLNS will restart and try to recover. In case problem re-occur than Please contact cisco-support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN-3-CHKPT_TOO_MANY_MEMBERS
### Response:
(Severity: 3), (Category: L2), (Description: The SPAN EA received configuration to mirror traffic from more bundle members than it is able to handle for a single bundle. This configuration has not been applied to the hardware.), (Recommended Action: Check the running configuration and platform capabilities. If necessary, remove some members from the bundle interface. Remove the monitor-session from the bundle interface, and then re-configure it.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-ALLOC_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Allocation of the specified resource failed because of a low memory condition.), (Recommended Action: This indicates a low memory condition. Reduce other system activity to ease memory demands.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_9_HIGH_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MMRP-3-FATAL_PROTOCOL_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: A fatal error has been hit during protocol processing. The process is restarting to attempt recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR_ENCAP-3-INIT_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Process initialization failed while applying encapsulation config, for which there is no current handling, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IP_EA-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An updation error has occured for IPv4 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_BAD_ALIGN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_BAD_ALIGN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OFA-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is just an info message in OFA), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_LI_EA-7-INIT
### Response:
(Severity: 7), (Category: L2), (Description: Error messages are seen during li_ea process initialisation failures.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSD_ENC-1-CARD_RELOAD
### Response:
(Severity: 1), (Category: OS), (Description: Encryption operation prepare phase is complete. Card will go through a reload to complete the operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIP-3-ERR_ITAL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error encountered in RIP ITAL module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INV-7-ERR_EDM_CREATE
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failure in Inventory Manager event creation), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INGRESSQ-3-ERR_RES_PROG
### Response:
(Severity: 3), (Category: FABRIC), (Description: Ingressq encountered an error during resource programming. If there are no further attempts to reprogram the device, the device behavior may be inconsistent.), (Recommended Action: The driver/client processes try to recover from this error. If any discrepancies are found in the device functionality, contact TAC Support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHMWIN_SVR-6-SHARED_MUTEX_REVIVED
### Response:
(Severity: 6), (Category: OS), (Description: A participant process crashed or exited while holding the shared shmwin control mutex and the shmwin_svr revived the mutex.), (Recommended Action: The message indiciates that a process exited while holding the shmwin mutex. The revival message is just informational only. It indicates that shmwin server has recovered the mutex. No action is required if the router is still functional. The attention should be directed to whether there were any process crashes. Show context output may give the information of any process crashes.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-3-CPU_CTRL_INTS
### Response:
(Severity: 3), (Category: L2), (Description: Unable to enable/disable/clear a CPU Ctrl interruprt register.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IEP-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: IP), (Description: An internal system error occured.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SKP_IP_EA-3-ERROR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSCMEDIA-4-THREAD_MUTEX_LOCK_FAIL
### Response:
(Severity: 4), (Category: PLATFORM), (Description: DSC media DLL encountered an error while locking a mutex. The operation related to the resource may be affected while the system continues to run normally.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-ACTION_IN_ACL_NOT_SUPPORTED_DEFAULT
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The following actions in an ACL are not supported in the direction specified in the default ACL TCAM key: capture set-ttl), (Recommended Action: create a user-defined key with the hw-module command)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-7-EVM_CREATE_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: The event_manager_create function reported an error trying to initialize the event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-3-CHKPT_XFORM_BUFFER_TOO_SMALL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The RSVP checkpoint table translation library was invoked with insufficient space to store the transformed checkpoint record.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-WRITE_SOCKET
### Response:
(Severity: 4), (Category: ROUTING), (Description: BGP detected that a socket write failed This happens in the standby.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-7-STORE_REBOOT_INFO_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Chassis APIs that write to non volatile memory failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-TS_LS_TIMEOUT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Device driver detected a timeout error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPA_JBI-7-DEBUG
### Response:
(Severity: 7), (Category: PLATFORM), (Description: This is a debuging message from the altera JTAG player), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-FATAL_ERROR_FM_EXIT
### Response:
(Severity: 3), (Category: INFRA), (Description: A high severity error occurred in MLAP communication with Fault Management.), (Recommended Action: show tech-support control-ethernet)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-3-SYSMGR_BLOCK_UNTIL_PRIMARY_FAILED
### Response:
(Severity: 3), (Category: SECURITY), (Description: Sysmgr API to process block until the go-primary notification is failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFSTATS-3-CHKPT_INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A fatal error was encountered during initialization.), (Recommended Action: If the process does not restart automatically then try manually restarting it. A likely cause for this error is that the system has run out of memory. If this is not an out-of-memory problem and restarting the process does not solve it then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-6-ERR_THREAD_START
### Response:
(Severity: 6), (Category: TOPOLOGY), (Description: System Admin Manager failed to start the specified thread.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMDR-2-ABORT
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does the sporadic scheduling algorithm work in IOS XR?
### Response:
With sporadic scheduling, a thread is assigned a normal priority, low priority, budget time, and replenish interval. The thread runs at normal priority until it exhausts its budget, then drops to low priority. After the replenish interval, the budget is restored and the thread returns to normal priority. This allows important threads to execute while preventing CPU starvation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-4-STDBY_IPC_FLAP_BULK_OP
### Response:
(Severity: 4), (Category: ROUTING), (Description: The AIPC link between active-LSD and standby-LSD has accumulated a large number of bulk-ops that are pending to be transmitted. This state can lead cpu-hogging by active-LSD. To recover from this state the affected AIPC link has been torn down and re-established. This recovery action will not impact traffic and is purely a syncing issue between active-LSD and standby-LSD.), (Recommended Action: Please collect show tech for mpls_lsd, p2p process mpls_lsd instance-id 1, aipcproxy and gsp for further investigation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_SET
### Response:
(Severity: 7), (Category: INSTALL), (Description: The Install infrastructure was unable to write some information which is required to complete the current request or operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-0-PEX_INT_VS1_BIT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Device driver detected a pex switch error), (Recommended Action: Please try to correct problem by reloading board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_VPLS-3-LTRACE_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB VPLS component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_SHELFMGR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FIA driver failed to retrive card state/type from shelfmgr. If the failure is due to a non EBUSY/EAGAIN error this will result in restart of the FIA driver process. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: Please collect the information specified in required_info section. Verify that the fia_driver is up and running by executing the following command at the CLI of the active RP: 'show process fia_driver location <loc>' If it is still non-operational, enable the following debugs of the FIA driver process: eio All EIO library events error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events Restart the driver by executing the following command at the CLI of the active RP: process restart fia_driver loc <loc>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-SCAN_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the scanner library. The process will be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-3-ROLE_CHANGE_THREAD_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The thread that register with sysmgr for the role change has failed to create/detach as mentioned in the message), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCHBRO-7-LIST
### Response:
(Severity: 7), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the key characteristics of the Lightweight Messaging (LWM) IPC?
### Response:
LWM is a connection-oriented synchronous IPC mechanism built on the microkernel message passing services. Key characteristics include\n- Synchronous request/reply semantics\n- Supports both intra-node and inter-node transparently via Qnet\n- Sender blocks until receiver processes the message and replies\n- Prevents receiver overrun but has higher latency than asynchronous IPC\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2FIB_SHM-3-ERR_L2FIB_SHM
### Response:
(Severity: 3), (Category: L2), (Description: Some error occurred in operations related to Shared Memory area. This could have occurred due to overuse of memory. This can result in- 1) Not programming hardware for proper forwarding. 2) Not creating new bridge.), (Recommended Action: To minimize the scaling of bridges, some processes (unnecessary services) can be removed from the configs. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-ENV_VARS
### Response:
(Severity: 3), (Category: MGBL), (Description: Some instances of exec require the environment to be set up before exec initializes. The process which execs 'exec' has failed to do this.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-7-DEBUG2
### Response:
(Severity: 7), (Category: SNMP), (Description: A Debug message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHNLZD_EFCM-3-ERROR_CFG_BUFF_MAP_MEMORY
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred in the Extended Flow Control Manager. EFCM was unable to map shared memory for debug.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-IPARM
### Response:
(Severity: 3), (Category: ROUTING), (Description: The specified IP/ARM request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MEMPOOL_EDM-1-EVENT_BLOCK_ERROR
### Response:
(Severity: 1), (Category: OS), (Description: Error during event block), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_TIMER_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while timer operation. The error condition can occur during: (1) initializing the timer (2) creating a new leaf timer), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-4-INVALID_CHASSIS_MAC
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: It has not been possible to retrieve a valid chassis MAC from the LRd infrastructure. ICPE will continue to retry to obtain a valid chassis MAC, but the nV Satellite feature cannot be initialized further until a valid chassis MAC has been obtained.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDA-3-TIMING_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An attempt to initialize or configure timing failed. 1588 Timing functionality may be impacted if it is configured. The error message describes the error, provides an error code and a string interpretation of the error code.), (Recommended Action: Please try to recover by reloading line card using CLI 'hw-mod loc <> reload'. If the issue persists, collect console log and the following information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces - show tech-support location <> file <> - show hw-module fpd location all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-GENINITFAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred at system initialization time.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-RESERVE_CANCELED
### Response:
(Severity: 6), (Category: LICENSE), (Description: None.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-TSP_TDDR_TIMEOUT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TSP TxDDR timeout.), (Recommended Action: Minor error, no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SYSDB_UNPACK
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AUTORP_MAP-3-DEBUG_FAILURE
### Response:
(Severity: 3), (Category: ROUTING), (Description: This error indicates an error in the debug initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-RODDICK_UPD_FAIL
### Response:
(Severity: 3), (Category: SERVICES), (Description: Roddick was not updated with change in vrf db.), (Recommended Action: This is a serious error and cgn_ma process has to be restarted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are BGP update groups and what are their benefits?
### Response:
An update group is a collection of peers with identical outbound policy. On IOS-XR, peers with the same outbound policy are automatically assigned to the same update group. Update generation is done once per group, conserving resources. Debugs also operate at the update group level.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_11
### Response:
(Severity: 3), (Category: IP), (Description: The MN or Logical-MN is configured for IPv4 or Dual service. Hence IPv4 address family is required for IPv4 traffic forwarding; whereas it is not configured in the VRF.), (Recommended Action: Configure IPv4 address family in the VRF specified in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_MALLOC
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error. Memory allocation failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MGMT_NO_FEATURE
### Response:
(Severity: 3), (Category: MGBL), (Description: No feature name was provide to the TTY Management terminal command process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is BGP Graceful Restart and how does it improve network convergence?
### Response:
BGP Graceful Restart is a mechanism that allows a BGP speaker to continue forwarding traffic while the BGP process restarts, thus avoiding traffic loss during the restart. It works by having the restarting speaker preserve its forwarding state and having the neighboring speakers retain the restarting speaker's routes during the restart. This significantly improves network convergence after a planned or unplanned BGP restart.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS-3-PROGRAM_REDQ_ENTRY_FAIL
### Response:
(Severity: 3), (Category: QOS), (Description: QMgr encountered an error while programming redq entry for interface default queues in the associated PSE), (Recommended Action: REDQ drop threshold could be 0.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR backup tunnel interface feature?
### Response:
The MPLS TE FRR backup tunnel interface feature allows a physical interface to be used exclusively for TE backup tunnels, rather than also carrying normal traffic. The backup tunnel interface is not advertised in the IGP and is not used for SPF calculations. This dedicates the interface resources for backup and avoids potential congestion from regular traffic.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-0-SLICE_SHUTDOWN_FAILED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Unrecoverable error occurred on the NP during the slice shutdown sequence. The line card will be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-4-SHUTDOWN
### Response:
(Severity: 4), (Category: ROUTING), (Description: RSVP process has encountered a problem which means it is no longer able to continue and is shutting down. The message includes a brief description of the problem. The message also describes whether or not RSVP process has been automatically restarted.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Follow the instructions associated with this message. If message states that an automatic restart has been scheduled, then RSVP process will recover automatically. If a manual restart is required, then 'process restart rsvp' is required to recover.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBUS-7-SVC_AGENT_CHECK_FAILED
### Response:
(Severity: 7), (Category: PLATFORM), (Description: mbus debug information %s - is a string outlining the action that the system will take to attempt to recover (e.g. forcing RAM download).), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-ISM_PD_LIB_SPA_RELOADED
### Response:
(Severity: 3), (Category: INSTALL), (Description: The indicated SPA was reloaded during ISSU and is being placed in disable state for the duration of the ISSU operation. This is safety measure to prevent the reload event of this SPA affecting the overall ISSU operation on the system.), (Recommended Action: The reload event of SPA should be investigated after the ISSU operation if it was not triggered by user using 'hw-module location <node> reload' command.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPAN_LIB-3-SPP_MSG_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The SPAN SPP client library failed to decode a message from the EA SPP module. This message has not been delivered to SPP.), (Recommended Action: Check the session configuration and any recent packet collection action commands issued for this session.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-PKT_LEN_ERR_0_XAUI_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet length error - 0 from XAUI on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-INV_TYPE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Cerficate with invalid attribute.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-4-INVALID_MONITORING_INTERVAL
### Response:
(Severity: 4), (Category: DIAG), (Description: The specified test monitoring interval is too small.), (Recommended Action: The system is working properly and no user action is required. If you want to specify a smaller testing interval, the warning message text provides the lowest possible configurable interval for the specified monitoring interval.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFDIAGBASE-3-INIT_FAIL
### Response:
(Severity: 3), (Category: DIAG), (Description: An error occurred during initialization of diagnostic's server queue.), (Recommended Action: Normally this message type indicates a transient error, and even though it will cause the process to be terminated, the problem will usually be remedied once the emitting process is restarted. If the error keeps occuring frequently then copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure MPLS on an interface?
### Response:
To enable MPLS on an interface, use the 'mpls ip' command in interface configuration mode. RP/0/RP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)#mpls ip
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you register and use onboard EEM policies in Cisco IOS XR?
### Response:
To register and use onboard EEM policies in Cisco IOS XR, you need to configure the 'event manager policy' command followed by the policy filename. The policy file should be present on the router's local storage, and it defines the event, conditions, and actions to be taken.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-3-ERR_RESTART
### Response:
(Severity: 3), (Category: FABRIC), (Description: FIA driver encountered a persistance fatal error during intialization and subsequent restarts. A reason text will be supplied. Call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering forwarding adjacency feature?
### Response:
The MPLS traffic engineering forwarding adjacency feature allows an MPLS TE tunnel to be used as a link in an IGP topology. This makes the tunnel appear as a single hop from the IGP perspective, irrespective of how many hops the tunnel actually traverses. It is enabled with the tunnel mpls traffic-eng forwarding-adjacency command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-UNEXPECTED_MSG
### Response:
(Severity: 3), (Category: OS), (Description: Received unexpected message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-7-FAIL_TO_GET_SDD
### Response:
(Severity: 7), (Category: OS), (Description: Fail to get sdd information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHANCON-6-SVC_INFO
### Response:
(Severity: 6), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_4_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-FAILED_MDR_NODE
### Response:
(Severity: 4), (Category: INSTALL), (Description: The installation required a warm-reload of the node, but the warm-reload failed. The install will be effected by a cold reload of the node.), (Recommended Action: No user action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-3-RSPI_PROT_EOP_ABORT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: RxSPI protocol end of packet abort.), (Recommended Action: Minor error, no action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONFIG-3-INTERFACE_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: An error was encountered during interface configuration restore/save operation. Some configuration may not have been applied or the line card may be in unusable state.), (Recommended Action: Reapply the missing configuration. If the interface still doesn't come up, try restarting the line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-EDC_OPTICS_SERDES_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Serdes signal fault detected/cleared between EDC and optics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-MAX_VALUE_EXCEEDED
### Response:
(Severity: 3), (Category: ROUTING), (Description: The value of an internally computed variable has exceeded the maximum value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-ISO_INSTALL_DONE
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-5-UNSUPPORTED
### Response:
(Severity: 5), (Category: OS), (Description: Some client requires unsupported ITAL functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_EVENT_CONN_NOTIFY
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for disconnection or connection error event. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE3_CODE_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE3_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_15_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_ASIC-4-HW_WARNING
### Response:
(Severity: 4), (Category: L2), (Description: Plim Asic errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and may trigger packet loss. These errors seen during LC boot up or SPA OIR are harmless.), (Recommended Action: Check if spa is seating properly Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-SERVER_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed server initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-5-ASIC_ERROR_REPROG_RESOURCE_THRESH
### Response:
(Severity: 5), (Category: PLATFORM), (Description: An ASIC error has occured and cause reprogram resource, such error has crossed threshold.), (Recommended Action: Errors that cause reprogram resource have happened and exceed threshold. This has been handled. *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-MANDATORY_ON
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_DOUBLE_AGENT
### Response:
(Severity: 3), (Category: OS), (Description: A BCDL agent for the group is already running.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA-2-RX_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Remote Fault: The PLIM received a Remote Fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message. Local Fault: The PLIM received a Local Fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Remote Fault: Correct the far end interface. Local Fault: Correct the far end or fiber to this interface.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rspp_rio_netio-3-CAPS_BUILDER_FAILED
### Response:
(Severity: 3), (Category: SERVICES), (Description: The service ingress diversion NetIO DLL capsulation builder function failed. Service ingress diversion in NetIO for the specified interface will not function properly.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SUB_SIP_SHARED_DB-4-TRACE_INIT
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This is a non-fatal error in initializing tracing buffer and can happen when the router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: Check the memory state of the ltrace process and overall system. Reduce the activities on the system if required for tracing.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-3-SWITCH_CONFIG_FAILURE
### Response:
(Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process encountered an error while configuring the switch during driver initialization. In order to recover, ESD will reset the switch, then exit so that it can be restarted by the process manager and attempt to configure the switch again.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_SERVICE_EA-3-ERR_SERVICE_INIT
### Response:
(Severity: 3), (Category: OS), (Description: service-application IPSec is unsupported on this variant of LC. If this LC forwards traffic to a service-application IPSec enabled interface then traffic will get forwarded in cleartext or packets may get dropped.), (Recommended Action: Replace the LC if you want it to support service traffic. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_ERRNO
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error description, error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-ERROR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error information during improper updation of variables or incorrect return state in platform FIB), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-2-BOARD_RESTART
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The FPGA Manager api for resetting the board via a control register has been called by the process with the specified PID.), (Recommended Action: Collect event logs and any other data specified by the crashing program)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMA_TP-3-ETMM_EGF_FAILURE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-SI5347_CLOCK_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5347 clock failure/success detected on port), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-3-CF_SBE_ERR_FIA11
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA11 channel FIFO single bit error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP_IPC-4-INTERNAL
### Response:
(Severity: 4), (Category: SNMP), (Description: SNMP library incurred an internal software error. This error indicates falied to create thread-specific or debug/ltrace initlization failed.), (Recommended Action: Restart process snmpd check again same senario. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-GENERAL_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Nvgen server encountered an error, see message for more details'), (Recommended Action: Collect the show logging output, console logs and error trace. Collect the show nvgen trace output. And contact tac representative with this information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-7-TRACEBACK
### Response:
(Severity: 7), (Category: ROUTING), (Description: An error was encountered during OSPF operation and a traceback was produced.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show logging - show ospf <process-name> - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-XAUI_1_LQ_FULL_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue full error on XAUI 1 LQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-5-POST_FPD_OP
### Response:
(Severity: 5), (Category: FABRIC), (Description: This message posts a notice to indicate that the FPD load operation is completed and a reset of the card is required to come up with the new PLD image.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-ERR_IDT_IM_IDB_ADD_FAIL_MSG
### Response:
(Severity: 3), (Category: ROUTING), (Description: During data transfer from active to standby LSD, standby failed to add interface to it's DB.), (Recommended Action: Please collect show tech for mpls_lsd for further investigation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY_DB-3-LOCK_BUSY
### Response:
(Severity: 3), (Category: MGBL), (Description: A system call for locking read-write lock failed because lock is busy.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPA_INTF_SHELFMGR-3-CARD_REIMAGE_CFG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Setting of the reimage attribute on the indicated card has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_6_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_6 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CGN-3-STATPORT_MAP
### Response:
(Severity: 3), (Category: SERVICES), (Description: The static port mapping requested has succeeded.), (Recommended Action: This is a success message and used to inform the user about the outside ipaddress and port number mapped to the inside address and port number.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-ATOMIC_RING_FULL
### Response:
(Severity: 6), (Category: ROUTING), (Description: The atomic ring for the indicated queue is full.), (Recommended Action: If the situation persists investigae whether there is resource starvation occurring.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETIO-7-DELETE_IDB_SUBINTF_FAILED
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: NetIO cannot delete a interface which still have subinterfaces under it. This could potentially cause issues with recreate of any interface, if the same interface handle is reused.), (Recommended Action: After the information is gathered, restart of netio/ifmgr should possibly bring them in sync with ifmgr & delete the main and subinterfaces. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
attestation_agent-2-IMA_DISK_CACHE_FULL
### Response:
(Severity: 2), (Category: MGBL), (Description: A failure occurred during IMA cache creation.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TAMSVCS-3-SHOW_ERR_DETAILS
### Response:
(Severity: 3), (Category: SECURITY), (Description: Generic Show TAM Error message - (Error Message - Error Detail - Error Description).), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTERFACE-4-ERR_SYSDB_BIND
### Response:
(Severity: 4), (Category: MGBL), (Description: Failed to bind to system database. Interface stats retrieval could fail because of this error), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-BREAKOUT_UNSUPPORTED_MODULE
### Response:
(Severity: 2), (Category: L2), (Description: The breakout mode is not supported on the optics inserted . The behavior of interfaces created is undeterministic.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-CPU_PKT_F0_FULL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 0 full.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_MISMATCH
### Response:
(Severity: 4), (Category: SYSDB), (Description: A quoted token was not terminated with a quote character.), (Recommended Action: Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-BAD_NOTIF
### Response:
(Severity: 3), (Category: LICENSE), (Description: An invalid notification type was received by the smart agent in the process of logging a syslog message.), (Recommended Action: This is a Smart Call Home internal error. Please report this to Cisco.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-OPEN_FILE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the Package infrastructure is behaving incorrectly. A file required for carrying out the current request or operation could not be opened, so processing of the operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_SMC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from SMC. Traceable condition occurs when the synchronization message quality level changes to SMC. The login node does not use the clock because the node cannot use any reference beneath its internal level, which is ST3.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-BADMSG
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show ospf <process-name> trace all)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-LOW_TEMP
### Response:
(Severity: 3), (Category: FABRIC), (Description: The POD detects a low temperature. The POD might not be functioning properly, and can cause cell drops or corruption in the rx or tx link associated with the POD.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-4-MEMORY_ALARM
### Response:
(Severity: 4), (Category: HA), (Description: Set: Free memory on this node is below the reported threshold. Clear: Free memory is above the MINOR theshold. In both cases, the amount of free memory in megabytes is reported.), (Recommended Action: Investigate memory usage on this node. It may be necessary to unconfigure some applications or move them to a different node. In the case of memory leaks, technical support may need to be contacted.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_IPV6_EA-3-ERR_INIT_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IPv6 EA. Typically, this is an error where the software fails during initialization. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid during initialization. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware during initialization/ configuration.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv6 </RP> <LC> show cef ipv6 location <> show cef ipv6 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How does IOS XR achieve infrastructure and service convergence?
### Response:
IOS XR enables infrastructure convergence by providing a single operating system that can run on different distributed platforms with a wide range of interface types and speeds. It enables service convergence by providing a rich set of QoS, virtualization, security, and management features to support different service types on a converged infrastructure.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AN-6-MASA_NOT_CONFIG
### Response:
(Severity: 6), (Category: SERVICES), (Description: 'The manufacturer authorised signing authority has ' 'not been configured, cannot do the verification of device'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRLLIB-3-HW_DETECTED_ERROR_CDMA
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CDMA ended in error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPA_MGR-4-MPA_RELOAD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Reload command received for mpa), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-TSPI_BUS_FRAME_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: TxSPI staus bus frame error.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-EGR_SGT2_FIFO_OFLOW_1_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Egress sgt2 fifo overflow on xaui-1 bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-3-DMAC_LINK_STATE_CHANGE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The internal link interface for the specified port is down.), (Recommended Action: The board would get reloaded. If users has auto reset option disabled in admin config, then the board would not get reloaded on its own. At this stage collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-BACKUP_FPD_LOADED
### Response:
(Severity: 3), (Category: DRIVER), (Description: The Backup Set of FPD images on IOFPGA Bootflash has been loaded on the indicated card. The output of 'show hw-module fpd' will show the affected images with BACK IMG state. This can happens when IOFPGA detects that one of the Primary image set is corrupted, so it fallback to load the backup image set to recover from the failure.), (Recommended Action: Although the system will continue to run, the backup image set might be of older version and it might have known issues that have been fixed on latest version. So it is critical to address the problem as soon as possible. The output of 'show hw-module location <loc> fpd' will identify the image with the problem with NEED UPGD state and it will have missing Programmed version. To correct the problem, use the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the FPD image and power-cycle the affected card for IOFPGA to load with the upgraded image.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-IDB_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_REMOVE_LC_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while removing LC from FGID), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHER_CTRL-4-XCVR_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSTATSS-3-ERR_DEBUG_REGISTER
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric statistics server process encountered an error while registering debug facility and hence failed to initialize. This software error will cause process termination for recovery. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-6-ERROR_THREAD_CREATE
### Response:
(Severity: 6), (Category: TOPOLOGY), (Description: System Admin Manager failed to allocate resource for the specified thread.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-1-TIMEOUT
### Response:
(Severity: 1), (Category: OS), (Description: An Event Manager blocking call was made with an invalid timeout specification.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-4-SENSOR_VALUE_SET_BY_TEST_TOOL
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAN-3-DRIVER_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-5-MCAST_DISABLED
### Response:
(Severity: 5), (Category: ROUTING), (Description: Most likely mfwd restarted and while it was down mcast was disabled. The other possibility is that mfwd retsarted while disabling mcast. In either case, when mfwd comes up, it will find that mcast is already disabled. Hence it will log this message and exit normally), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-4-PROC_START_NAME
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPF-3-IFCHECK
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal consistency check has failed. An interface appears to be associated with more than one area.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show ospf interface <intf name> - show running-config - show configuration failed - show configuration history last 5 - show commit changes <last 5> - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NETFLOW-3-ERR_CFG_APPLY
### Response:
(Severity: 3), (Category: MGBL), (Description: This is an error message in the Netflow manager to indicate that due to specified reasons, it was unable to apply the configuration that it had previously verified and accepted. This errmsg usually means that the netflow running config and netflow operational state are out of sync.), (Recommended Action: This error message indicates that a configuration problem occurred. Try reapplying the configuration. If that fails, the try restarting the process that issued the error message with the command <CmdBold>process restart <name> location <node><NoCmdBold>.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE FRR auto-tunnel backup nhop-only feature?
### Response:
The MPLS TE FRR auto-tunnel backup nhop-only feature restricts auto-tunnel backup tunnels to only the next-hop (NHOP) router on the path to the tunnel destination. It does not allow creation of backup tunnels to the next-next-hop (NNHOP) router. This reduces the number of auto-backup tunnels created and the associated overhead, but may provide less protection coverage.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-3-CHASSIS_MISMATCH
### Response:
(Severity: 3), (Category: LICENSE), (Description: The message displays the result of comparing the license database to the current state of the chassis. If the chassis and license database do not match, the license database will be cleared and implicit evaluation licenses will be available for 90 days. This alarm may occur if the route processor card has been moved from one chassis to another.), (Recommended Action: If a backup of the license database is available it can be restored with the 'license restore' command. Otherwise contact Cisco TAC to obtain a new set of licenses for this system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-3-ERR_IFH_BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-NO_PACKET_MODE
### Response:
(Severity: 4), (Category: MGBL), (Description: The TTY Server informed the RS232 DLL about a packet mode session, but we don't yet support packet mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-4-EA_RETRY
### Response:
(Severity: 4), (Category: FORWARDING), (Description: The Tunnel-IP EA process has retried programming tunnel interface(s) because other processes are not ready.), (Recommended Action: If the retry does not succeeded in some time, remove and re-create the tunnel.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MSDP-6-HA_INFO
### Response:
(Severity: 6), (Category: ROUTING), (Description: Information related to HA events like NSR readiness.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LI-3-NETIO_INIT
### Response:
(Severity: 3), (Category: ACL), (Description: The LI Netio thread encountered the specified error during thread creation or during initialization of the specified facility. System will retry to start the process to recover.), (Recommended Action: If this message recurs, copy the System Message exactly as it appears on the console or in the system log, enter the <CmdBold>show process li_mgr<NoCmdBold> command and, if the line card was reloaded, collect <CmdBold>show context<NoCmdBold> output, contact Cisco technical support representative, and provide the representative with the required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-CHKPT_XFORM_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while with chkpoint table xform.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_AIS_DEMD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMAEDM-3-SYSMGR_PROC_READY_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEPKI-3-CISCOSSH_HOSTKEY_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: CEPKI error message for CISCOSSH hostkey.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-HA_DP_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: HA Data path test failed, reloading ISM.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-7-DEBUG_TRACEBACK
### Response:
(Severity: 7), (Category: L2), (Description: This is a debug message.), (Recommended Action: This message contains debugging information. Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-ATTR_NVRAM_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to initialize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-BFD_CREATE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: IS-IS failed to create one or more sessions with the BFD server. Retry mechanism will preriodically try to create session.), (Recommended Action: This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_SERVICES-3-BABMI_RESET_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error occurred in creating/accessing shared memory between Bambi server & MANS FPGA server. This error could result in communication loss between MSC and Services PLIM.), (Recommended Action: Do warm reload of the Services PLIM MSC. If the issue persists do a cold reboot of the same. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SEIPC-3-INVALID_OBJECT
### Response:
(Severity: 3), (Category: OS), (Description: Encountered an error in debug module. This error should not impact the major functionality of the module. Here is a list of possible reasons for this message (not all-inclusive). - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-NET_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error. If the error is seen during transient system state, for instance during LC OIR, it is harmless and can be safely ignored.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-ISO_INSTALL_STARTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-1-OPERATION_ISSU_RUN_DONE
### Response:
(Severity: 1), (Category: INSTALL), (Description: The ISSU Run operation has completed successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-IDB_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PSE-3-INIT_ERROR_MSG
### Response:
(Severity: 3), (Category: L2), (Description: This is a debug message in the PSE Driver to indicate an operation or condition.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-SYSDB_REGISTER_EDM
### Response:
(Severity: 3), (Category: MGBL), (Description: Exec registers its EDM path for storing data. This registration of EDM has failed due to reasons mentioned in the error message. This failure could cause, exec session not to start up or could cause problem in entering configuration submodes.), (Recommended Action: Close the exec session and relogin. If the message recurs, copy and save the message and call your technical support representative for assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-ALARM_ON_ISOLATED_RP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that an alarm is received by shelfmgr when the RP is in isolated state. For critical alarm, reboot is followed.), (Recommended Action: *none*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VEEA-4-BCMDPA_L1_PORT_PFC_LLFC_UNSUPPORTED_COEXIST
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PFC and Flowcontrol co-existance is not supported. If both are added together, we dont reject the config but the features are not enabled in Hw and dont work as desired.), (Recommended Action: Unsupported config, fix config. We need to remove both the config and re-add only the config required for the config to start working.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLU-4-TBM_INCONSISTENT
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Errors were encountered trying to program hardware tables, forwarding on some entries may be affected, periodic error correction will be attempted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_FXS-3-SECOND_TAG_ANY_NORMALIZATION_VLAN_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to create Attachment Circuit as second or inner normalization vlan is 4095. Second or inner vlan is 4095 because of following configuration under sub interface, [encapsulation <tag type> <tag id> second-dot1q any].), (Recommended Action: Please use one of the rewrite configuration to resolve 1. rewrite ingress tag push <tag type> <tag id> symmetric 2. rewrite ingress tag translate 1-to-2 <tag type> <tag id>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-MULTI_NODE_TRANS
### Response:
(Severity: 7), (Category: SYSDB), (Description: An application tried to use a transaction to access multiple nodes; this is not supported currently.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP-3-DYING_GASP_VRF_REM
### Response:
(Severity: 3), (Category: SNMP), (Description: VRF config has been removed under which snmp dying gasp host was configured. Either re-configure vrf or remove snmp host), (Recommended Action: Reconfigure VRF or remove snmp host config under that VRF)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_NCP_CAPS_STALE
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error when resyncing with IM and discovered an NCP caps where PPP is no longer expected to be running. The most likely reason for this is a connection problem with the IM service and is likely to be a transient issue, but the error could also be caused by low memory resources or programming error.), (Recommended Action: The error is likely to be harmles, if problems are encountered, consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-FEATURE_NEEDED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The specified feature is configured without the necessary license.), (Recommended Action: The customer should either purchase the license or disable the feature.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GIRO-4-DUPLICATE_PLIM
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The platform driver has provided invalid PLIM information that contains duplicated PLIMs.), (Recommended Action: If this is seen following a change in system configuration that results in the feature exceeding the supported scale then remove the configuration and restart this process. If the system has not been configured beyond the supported scale then seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_ASR9K_NETIO_LIB-4-GET_MYNODEID_FAIL
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: Unable to determine my node id using platform api.), (Recommended Action: Please capture show proc ouput and show logging output - 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
JACKET-6-INFO
### Response:
(Severity: 6), (Category: L2), (Description: This is an informational message in the jacket driver to indicate an operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-ABNORMAL_EXIT
### Response:
(Severity: 3), (Category: MGBL), (Description: Process exited abnormally by invoking exit().), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-3-GROUP_FIND_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp trace group error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp trace group error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-STDBY_RP_REBOOT_RECEIVED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Standby RP node notified shelfmgr about its software reboot with the reboot reason and cause code.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_L2FIB_METRO_SHOW-7-INVALID_OPTION
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Startup option supplied to l2fib metro show command is not valid.), (Recommended Action: Please re-enter the correct option as described in the usage message 'Usage: hfr_l2fib_metro_show [-N <node name>]' Example: sh controllers hfr int Ten0/2/0/0 loc 0/2/cpu0, or run hfr_l2fib_metro_show -N 33 If the issue is seen after taking the action,Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-3-EVENT_CONN_CREATION_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: Failed to create event connection. Event connection is necessary for OBFL to handle various events. This will restart the process.), (Recommended Action: If the issue is seen after restart then, collect the following data and contact support. 1. admin show logging onboard trace manager severity info location all 2. admin show logging onboard trace config severity info location all 3. admin show logging onboard trace lib severity info location all 4. show logging 5. show tech-support sysdb)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-OTN_FRAMER_DRIVER_CONNECT_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error. Frequency synchronization on this line card is disabled.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-UNKNOWN_BOARD_TYPE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This line card does is not known to work with the frequency synchronizatoin feature.), (Recommended Action: Report this message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install activate command in IOS XR?
### Response:
The 'install activate' command is used to make a previously added software package active on the router. It triggers the actual installation of the package and updates the active software set.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFLX_LIB_MGR-3-INTF_DPC_REMOVE_ERR
### Response:
(Severity: 3), (Category: SERVICES), (Description: The Interflex Manager failed to completely clean up interface from the DPC queue after an interface creation failed. This will have left the system in an inconsistent state. The most likely reason for this error is memory exhaustion.), (Recommended Action: Look for ways to free up memory and restart the interflex_mgr process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-ENV_STATE_UNKNOWN
### Response:
(Severity: 7), (Category: OS), (Description: An environment record has an unknown state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSDIR-1-QSDIR_RESTART
### Response:
(Severity: 1), (Category: INSTALL), (Description: Quickstart operation aborted because Quickstart Director restarted unexpectedly and the operation could not be resumed.), (Recommended Action: The reason for this operation failure has to be analyzed. Collect the show tech logs by running 'show tech-support qs' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_I2C_PHY_ACK_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected I2C access error on PHY SFP port.), (Recommended Action: Ensure that the SFP plugged in is supported. If not, replace the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSM_LIB-7-DEBUG
### Response:
(Severity: 7), (Category: OS), (Description: Debug message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-4-SYSDB_BIND
### Response:
(Severity: 4), (Category: INSTALL), (Description: This may be because the communications infrastructure is not yet up. If this problem persists, the operations of the Install infrastructure may not be able to proceed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_SYSDB_DATALIST
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAA_BASE-3-ERROR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Error encountered while running AAA Base), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TURBOBOOT-7-DISK_INACCESSIBLE
### Response:
(Severity: 7), (Category: INSTALL), (Description: Install device could not be accessed and may be corrupt or missing.), (Recommended Action: Check if the boot device is installed correctly. Run disk checks using 'fsck' disk check CLI. Based on the outcome of disk check take corrective action and retry turboboot.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ROMMON_BURNER-3-FILE_OP_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error occured with file operations.), (Recommended Action: No action is required..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-INVALIDTEMPLATE
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The template in this file is invalid or wrong version'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-3-NCS1K_SDK_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SDK initialization for the specified coherentDSP device has failed on the specified slice. No configuration and manageability data retrieval is possible on the coherentDSP port.), (Recommended Action: The casue for the failure has to be analyzed. Collect the show tech logs by running 'show tech-support ncs1k detail' and forward the logs to the TAC. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-INVALID_TEST
### Response:
(Severity: 3), (Category: DIAG), (Description: A test for diagnostics that does not exist was requested.), (Recommended Action: Ensure the specified test name is supported by the line card. The list of available tests can be retrieved using show diagnostic content.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-SRV6_SIDMGR_API_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: An SRv6 sidmgr API returned an error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UDPSNMP-3-SYSTEM
### Response:
(Severity: 3), (Category: SNMP), (Description: Failed to execute a system call. This could be due to low memory condition or an internal software error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBSYSDB-3-INVALID_REQUEST
### Response:
(Severity: 3), (Category: SYSDB), (Description: A client process requested access or registration with non-empty relative item/area name on a connection bound to an item), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-INTERNAL_INCONSISTENCY
### Response:
(Severity: 3), (Category: ROUTING), (Description: LDP has detected an internal inconsistency. Please capture a core file for analysis.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
exec-3-TTY_MGMT_DEREGISTER
### Response:
(Severity: 3), (Category: MGBL), (Description: The call to tty_mgmt_deregister_tty_options() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MKA-5-TX_SECURE_CHANNEL_TERMINATED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_FADB-4-SHM_FILE_TRUNCATE_FAIL
### Response:
(Severity: 4), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to truncate the FADB shared memory file), (Recommended Action: Search the event logs for events/errors related to the failure reason. Shared Memory Management and disk access is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EGRESSQ_HW_DLL-3-IMDR_MAP_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: There is a discrepancy between the egressq configuration before and after IMDR. The egressq configuration after IMDR should normally be the same as before. This could indicate an internal software error.), (Recommended Action: Watch for potential drop in the egress traffic. If the router misbehaves or traffic is dropped, please collect the information from the following commands for the line card that reported the error: show tech show controller egressq trace all show controller egressq interface all show controller egressq port all show controller egressq group all show controller egressq queue all show qos ea trace all Call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-3-CAPS_DELETE
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: IM has implicitly removed some caps nodes as part of an interface delete. These caps nodes should have been removed prior to the interface delete.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-PCB_VERSION_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RSP CPU controller driver version is not compatible with the current Board.), (Recommended Action: Please try to correct the problem by reloading the board using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DSC-4-WARNING_HB_THRESHOLD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Heartbeats over control-ethernet from the node in question are being missed. This usually indicates a CE transport issue. Please check control ethernet connections to and from the node in question. Note, these messages are expected if node in question is going down due to a user trigger such as OIR, failover), (Recommended Action: Check the control ethernet connectivity to the node. (Check if the cables are okay and also if the switch is operating normally).If the connectivty is fine and none of the mentioned conditions are there,Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-1-RSPI_PROT_BURST_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: RxSPI protocol burst error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
umass_enum-3-FAILED_TO_OPEN_PATH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Wait for dlls to get loaded since usb pkg is loaded before infra/watchdog (wdsysmon).And it wait for the disk to be mounted. This error message will get printed when it unable to open path to register for diskspace monitoring.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMS-7-RESTARTING
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB server is unable to function due to a problem with a piece of infrastructure. The only hope of recovery is to restart. If the problem persists, the card will be automatically reloaded.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CANB_SERVER-3-IDPROM_CACHE_OVERFLOW
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message related to the Canbus Controller processing the received UART message.), (Recommended Action: Do EP soft/hard OIR, or restart canb-server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-TEMP_TOO_HIGH_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: Crossbar fabric interface ASIC-0 is reporting a very high temperature.), (Recommended Action: Check if board is reporting temperature alarm. If not, it is due to Crossbar fabric interface heatsink not being installed properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-RX_PKT_MALFORMED
### Response:
(Severity: 4), (Category: ROUTING), (Description: Packet received was malformed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLNS-3-CONFIG_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: CLNS could not initialize its configuration mechanism, and all future CLNS configuration will fail.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_5_LOW_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-SLOTID_PAR_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RSP CPU controller has detected slot id parity. This could be possible if RSP is not seated properly.), (Recommended Action: Check to see if the RSP is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-4-NO_AUTHENTICATION_METHOD
### Response:
(Severity: 4), (Category: L2), (Description: There is no 'aaa authentication dot1x ' configuration, to direct dot1x authentication request to remote AAA server. Neither there is complete eap profile hooked under authenticator dot1x profile to enable local authentication), (Recommended Action: For remote autheticaton, configure 'aaa authentication dot1x default group <>' , or to use local eap server, configure a complete eap profile and attach it to authenticator sub mode under dot1x profile.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RS232-4-API_LOCATE_ERROR
### Response:
(Severity: 4), (Category: MGBL), (Description: The RS232 DLL was unable find the details required from a DLL it had loaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REPLICATOR-7-UPDATE_FAILED
### Response:
(Severity: 7), (Category: LIBRARY), (Description: The client returned an error when trying to apply an update. The replicator library will try to recover by requesting a replay of the update. If this condition persists, data may be lost on failover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLMGR-7-UPTIME_CONT_TOO_LARGE
### Response:
(Severity: 7), (Category: OS), (Description: A continuous record too large, or internal parameter might be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_RX_LOSS_OF_CHANNEL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_9_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Rx power greater than or equal to the high Rx power warning threshold. The CPAK is the pluggable optics on the line cards. The Rx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-0-BARRIER_STALL_RACK_RELOAD
### Response:
(Severity: 0), (Category: FABRIC), (Description: Rack is brought down if RPs on the rack are detected stalling on fabric barriers. If the rack is isolated from fabric via CLI, then this is expected. If this message occurs otherwise, it could be due to a software error or an unexpected hw error.), (Recommended Action: If fabric links, fabric cards or fabric chassis connecting to the rack are brought down via CLI, then this is expected. If the problem happens otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IGPTE_LIB-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurrred when accessing the system database), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_RUN_PHASE_FINISHED
### Response:
(Severity: 6), (Category: INSTALL), (Description: The run phase of an ISSU operation has finished successfully.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTT4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-NPU_1_PKT_MINLEN_ERR_2
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on NPU-1 interface on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-6-MLACP_BUNDLE_MAC_ARBITRATION
### Response:
(Severity: 6), (Category: L2), (Description: Each mLACP peer specifies a MAC address for a bundle. If the MAC addressess are different, arbitration must occur. However, if the peer that has supplied the value selected through arbitration disconnects, there will be a flap in the bundle state.), (Recommended Action: If the alarm is set, the user should ensure that all peers have the same MAC address for the bundle.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-3-WL_QUEUE_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The CFM MA failed to schedule an operation required to modify Maintenance Point configuration for an interface. This is likely to be a system resource issue.), (Recommended Action: Attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_CRC_TRANS_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_CRC_TRANS_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSRP-4-ERR_LOOPED
### Response:
(Severity: 4), (Category: L2), (Description: An SSRP message has been received containing the local magic number. This makes it highly likely that the SSRP TCP channel is connected to itself. In the unlikely event that both ends select the same magic number, a new random number is chosen locally, so the situation will recover itself.), (Recommended Action: Check that the SSRP configuration for the network is correct. The most likely problem is that the peer IPv4 address specified in the SSRP Profile configuration is a local IPv4 address - so the TCP packets that are being sent are simply arriving back on the same router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'default-information originate' command in OSPF?
### Response:
The 'default-information originate' command is used to generate a default external route into an OSPF routing domain. This is commonly used when redistributing routes from another protocol into OSPF and you want OSPF to propagate a default route.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_CONF_PRX-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-6-PPU_START
### Response:
(Severity: 6), (Category: FABRIC), (Description: FSDB aggregator has started Calvados plane by plane upgrade. Please avoid disrupting the router by doing OIRs, link/plane shutdowns till it completes), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-SYSDB
### Response:
(Severity: 4), (Category: OS), (Description: An internal sysdb function failed.), (Recommended Action: Please collect the output of the following commands: - show tech-support lpts - show tech-support sysdb - show logging)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-6-CONSOLE_MSG
### Response:
(Severity: 6), (Category: LICENSE), (Description: Smart Agent console message logging.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-ASIC_DMA_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: DMA write failed), (Recommended Action: Collect the output of the following commands executed from the CLI of the active RP from sysadmin VM and reload the card to recover. 1. 'show processes sfe_driver location <loc>' 2. show tech-suport ctrace 3. show tech-support fabric 4. dmesg from host and sysadmin VM 5. /var/log/messages from host and sysadmin VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DISCOVERY-3-RAM_ECC_2BIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Two or more bit ECC error (Uncorrectable) found in a RAM Access.), (Recommended Action: This is a critical error which will cause board-reset. Check if the board comes up fine after reload. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
rewrite-1-DB_VERSION_CHANGE
### Response:
(Severity: 1), (Category: L2), (Description: The rewrite database is unreadable following a version change caused by a SMU being installed.), (Recommended Action: Remove the SMU which was just installed. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-3-MAC_NOT_CONFIGURED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message provides information about the mac configuration.), (Recommended Action: Collect console log and the following information. Contact your technical support representative. - sh platform - sh processes vic location <> - show tech-support ethernet interface)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN extranet feature?
### Response:
The MPLS VPN extranet feature allows MPLS VPN service providers to distribute routes across VPN boundaries. It enables a VPN to share common routes with other VPNs, providing controlled access between VPNs. Extranet VPNs are implemented by configuring route targets to be imported and exported between VPNs that need to share routes.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_VCM_EA-3-NO_STATS
### Response:
(Severity: 3), (Category: L2), (Description: The FR VCM EA subinterface stats collection initialization failed. The statsd server process might be too busy to listen to the bind/registration request.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_MESSAGING-7-EVENT_MANAGER
### Response:
(Severity: 7), (Category: HA), (Description: A call to an event manager function failed.), (Recommended Action: Collect system log information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTNLC_FPD-6-UPG_NOT_SUPPORTED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_EA-3-BLOCKAGE
### Response:
(Severity: 3), (Category: IP), (Description: The ipv4/ipv6 EA is trying to program FIB or the platform and a delay was noticed. This delay could lead to other undesirable side effects such as failing to apply configuration etc.), (Recommended Action: Monitor the affected node to see whether any processses are blocked.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFE_DRVR-3-ASIC_PON_RESET
### Response:
(Severity: 3), (Category: FABRIC), (Description: The device failed due to the above mentioned error. The device is being reset (PON) to recover from failure), (Recommended Action: Collect all the event logs and the output of the following commands executed from the CLI of the active RP if the asic is continuously reset and recovery does not take place after device reset: 1. 'show processes sfe_driver location <loc>' 2. Collect all traces: 'show controller sfe trace all location <loc>' 3. dmesg and /var/log/messages from host and sysadmin VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ-5-MI_BPDECODE
### Response:
(Severity: 5), (Category: FABRIC), (Description: Fabricq ASIC encountered a MI Unicast/Multicast BP Decode error), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-6-INVALID_PKT
### Response:
(Severity: 6), (Category: IP), (Description: Received an invalid packet from Ethserver due to the specified reason in the message,hence dropping the packet.), (Recommended Action: This is an informational message. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-VERSION_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: PLATFORM FIB, Information), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_NVSAT_EA_LTRACE-6-ERR_INFO_VERBOSE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the the platform NVSAT EA LTRACE component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_LOCSW-7-LTRACE_WARNING
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-3-SYSMGR
### Response:
(Severity: 3), (Category: ROUTING), (Description: A specified system manager request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPUCTRL-3-HW_DETECTED_ERROR_PCIX
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cpuctrl driver HW error interrupt handler was invoked and found valid PCIX error registers.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-EVENT_HANDLER_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM EA failed to process an event and will now exit. It should be restarted by SysMgr, allowing it to resynchronise its internal state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HTTP-7-DEBUGGING
### Response:
(Severity: 7), (Category: MGBL), (Description: A Debugging operation carried out by the HTTP Server returned unexpected results.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
10GE_PLIM-4-RX_RF
### Response:
(Severity: 4), (Category: L2), (Description: The PLIM received a remote fault on the given interface which will result in a link flap.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTR9
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
flash_platform-3-FAIL_TO_OPEN_FILE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Device stale bytes must be cleaned to get the free space. This error message will be displayed when the device open has failed during the cleaning of stale bytes.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-INVMGR_SLICE_INFO_MISMATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The NP driver received slice data diff than existing value), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_RP-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: During initialization of the Forwarding-Information-Base of the CRS platform, an unexpected error has occurred during an update operation. The running software should automatically recover if it isn't a hardware error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-LSP_SOFT_PREEMPT
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified interface, with the specified LSP Id, has been soft \ preempted at specified IP address or local node. The first %s refers to \ the signalled tunnel name and the second %s refers to the interface name \ where the preemption was signalled. The third %s refers to the address of \ the signalling interface. The fourth and fifth %s are filled out if frr \ rewrite is done during soft preemption. The fourth %s is a message stating \ the traffic has been moved to a backup tunnel and fifth %s is the name of \ the backup tunnel.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIF_MA-2-EMA_INIT_ERR
### Response:
(Severity: 2), (Category: L2), (Description: Failed to connect to open a connection channel to initialize the Ethernet MAC Allocation library. This prevents the process from getting MACs dynamically. Configuring static MACs under the interface is still possible.), (Recommended Action: *support*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QOS_MA-3-DPC_REM
### Response:
(Severity: 3), (Category: QOS), (Description: The QoS MA process encountered the specified error while trying to send a critical operation to the EA.), (Recommended Action: Contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the metric-style command in IS-IS?
### Response:
The metric-style command is used to configure the type of metric used by IS-IS. The options are narrow (old-style 6-bit metrics), wide (new-style 24-bit or 32-bit metrics), and transition (both metrics during a transition period). Wide metrics provide a larger range of values and are useful in large networks. Narrow metrics are compatible with older implementations.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MULTILINK_UV-3-SYSMGR
### Response:
(Severity: 3), (Category: L2), (Description: The process was initialized successfully but was unable to inform System Manager of the success.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-WARN_ACC_IF_SES_THRESHOLD_EXCD
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions on the access interface has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SERDES-3-RX_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A receive error occurred at the physical layer of the port. It can be a transient self-clearing error when a port is admin shutdown or enabled. Else, it is an indication of a fault on the line. In most cases, the fault would bring the port link down and cause complete traffic drop. In case the link is still up, there may be intermittent packet drops due to encoding errors in packets received.), (Recommended Action: The fault can be ignored if it is self-clearing during the process when the port is admin shutdown and then enabled. If the fault remains for an extended period then please check the presence of the module and proper fiber connectivity. If module and fiber connectivity is verified then contact Cisco support with the output of the commands: 'show controllers tenGigE <i/f> all'. 'show serdes trace configuration location <>' 'show serdes trace periodic location <>' 'show serdes trace interrupt location <>' 'show tech-support ethernet interface location <loc>' 'show hw-module fpd location all' 'admin show inventory')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSE_QOSEA-3-BANDWIDTH_REMAINING_RATIO
### Response:
(Severity: 3), (Category: QOS), (Description: The bandwidth remaining ratio is invalid at this level. The message will provide further details on the error.), (Recommended Action: Please adjust the bandwidth remaining parameters in the policy map.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_PENDING_STATE
### Response:
(Severity: 2), (Category: LICENSE), (Description: Upgrade License status couldn't be obtained.), (Recommended Action: The customer should check the connection to the backend Smart Licensing server.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QNET-3-WRITE_QNET_PAK_ERR
### Response:
(Severity: 3), (Category: OS), (Description: %d- Number of particles %d- Maximum IOV parts valid %d- Length of the packet %d- Maximum MTU size supported), (Recommended Action: Ignore the message if it only appears once otherwise contact TAC)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp confederation identifier' command in IOS XR BGP configuration?
### Response:
The 'bgp confederation identifier' command is used to configure the BGP confederation identifier. A confederation is a technique used to reduce the iBGP mesh inside an AS. The AS is divided into multiple sub-AS, each identified by a confederation identifier. Each sub-AS has a full iBGP mesh, and an eBGP session is used between the sub-AS. To external peers, the confederation still appears as a single AS.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DNX_SPAN_EA-4-CFG_OVERRIDE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: monitor-session is already configured on the bundle member interface and configuring monitor-session on bundle-ether will override the old monitor-session config.), (Recommended Action: To avoid confusion, user should remove monitor-session config from bundle member interface which is no longer active.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAPS-5-POOL_UTIL_HIGH
### Response:
(Severity: 5), (Category: IP), (Description: Utilization exceeded high threshold for specified pool. Pool may deplete very soon and so it would be good to add more address ranges for allocation to new clients. Otherwise new address allocation requests will fail. Pool utilization can be monitored using the command 'show pool ipv4/ipv6 name <pool_name>'.), (Recommended Action: Add more address ranges for the specified pool. For details regarding related configurations, please refer 'Address Pool Service Commands' chapter in Cisco IOS XR software configuration guide.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-3-UNKNOWN_IDB
### Response:
(Severity: 3), (Category: L2), (Description: A set of IDBs are kept with information on each InARP interface. Somehow this information has become inconsistent with the system.), (Recommended Action: Restart the main process (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-4-ERR_IMC
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error communicating with Interface Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Interface Manager Control Server, but the error could also be caused by low memory resource or programming error.), (Recommended Action: In many cases, PPPoE MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OTN_FRAMER-3-CONFIG_OOS_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Maximum retries of OOS Message are reached. Discarding this message.), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SM-3-COMMUNICATION
### Response:
(Severity: 3), (Category: INSTALL), (Description: The communications infrastructure may not yet be initialised. If this problem persists, seek guidance.), (Recommended Action: The communications infrastructure may not be up yet. Please retry the operation. If the message recurs continuously, please contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-FAILEDPOWERUP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates the board in named slot failed to power up. The node will be reloaded automatically.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-NOT_AUTHORIZED_FOR_IPV6_MOBILITY_SERVICE
### Response:
(Severity: 3), (Category: IP), (Description: Service configured for the MN or Logical-MN in the MN profile in domain configuration is IPv4-only; however, HNP option is received in the PBU.), (Recommended Action: Configure IPv4-only service on the MAG. Alternatively, configure service on the LMA in the MN profile to match with that on he MAG. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
B_SHIM_PARTNER-3-CAP_ADD_ERR
### Response:
(Severity: 3), (Category: L2), (Description: 'There is an error when adding batched channelized interface caps.'), (Recommended Action: Perform below steps and see if error goes away: 1) SPA process restart by executing CLI: 'process restart <spa_process_id> location <> 2) Netio process restart by executin CLI: 'process restart netion location <>' 3) SPA reload by executing CLI: 'hw-module subslot <> reload')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CERR_LIB-7-SETSPECIFIC
### Response:
(Severity: 7), (Category: OS), (Description: The infrastructure library was unable to set a threadspecific data pointer for thread private data storage.), (Recommended Action: Check to see if sufficient memory resources remain for normal operations. Add memory if necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-VRF_CLEANUP_DELAY
### Response:
(Severity: 5), (Category: ROUTING), (Description: BGP is taking more than usual time to cleanup the VRF. This normally happens due to improper config or overflowing supported scale limitations), (Recommended Action: This message is for information purpose only. Request to revisit config and scale)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-IF_CREATE_RETRIES_EXHAUSTED
### Response:
(Severity: 3), (Category: FORWARDING), (Description: An error was encountered while creating the tunnel interface. It was retried a number of times, but all reties exhausted. This occurs when interface manager is not ready to create interface state in at least one LC or RP.), (Recommended Action: Configure the tunnel interface again after a minute or two. If the error persists, then do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RDS-7-ENS_PRODUCER_RELEASE
### Response:
(Severity: 7), (Category: OS), (Description: RDS library uses ENS/GSP services to read/write data. While using ens API , it returned failure. ens_producer_release failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-2-INDUCED_QNET_DOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This message indicates that shelfmgr was induced to send out a qnet node-down notification for the given node by the user.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ITAL-3-MEM_ALLOC_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: A memory allocation operation failed.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-2-SYSTEM_RELOAD_INFO
### Response:
(Severity: 2), (Category: INSTALL), (Description: Specified message provides info that the entire system will be reloaded as part of the specified install operation.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-5-NBRCHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: An EIGRP neighbor has gone UP or DOWN.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONET_APS-7-ERROR
### Response:
(Severity: 7), (Category: L2), (Description: A general failure occured while executing the function in question. The message contains info about the cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify continued correct operation of SONET APS.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_CLI-7-SYMBOL_NOT_FOUND
### Response:
(Severity: 7), (Category: OS), (Description: A symbol notified from a process is not found), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SIM_SE-3-SYS_INIT_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONCERTO-5-ERR_CONT
### Response:
(Severity: 5), (Category: PLATFORM), (Description: This message indicates an error occurred beyond which execution of the concerto_driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INST_IO-3-NULL_POINTER
### Response:
(Severity: 3), (Category: INSTALL), (Description: 'One of the function arguments is NULL.'), (Recommended Action: 'Retry the 'show' command or 'install' operation.' 'Even after few tries,if the error is seen, ' 'restart the 'instdir' process from exec mode and retry the operation.' 'Contact TAC if not resolved.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FHRP_COMMS-4-DUPLICATE_ENTRY
### Response:
(Severity: 4), (Category: L2), (Description: The Checkpoint table contained a duplicate entry. This is unexpected, and likely indicates a software fault.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_EVENT
### Response:
(Severity: 4), (Category: SYSDB), (Description: A notification event other than one of those supported was supplied.), (Recommended Action: Use help for a list of supported events. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LOGIN_SHELL-3-BASH_SPAWN
### Response:
(Severity: 3), (Category: MGMT), (Description: This error comes when there is issue with spawning the bash, bash shell itself is not present), (Recommended Action: The issue should be recovered when retrying login, if this message keeps on coming please collect required log)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_MRIB_UNBIND
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FR_INARP-2-INIT
### Response:
(Severity: 2), (Category: L2), (Description: During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager. The argument will show the error detected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-IDB
### Response:
(Severity: 3), (Category: ROUTING), (Description: FIB maintains a database for interfaces, but was unable to process an entry. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Try restarting the FIB process to see if the problem goes away. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'bgp multipath as-path' command in IOS XR BGP configuration?
### Response:
The 'bgp multipath as-path' command is used to enable multipath load balancing over paths with different AS paths. It is similar to the 'bgp bestpath as-path multipath-relax' command, but it allows the installation of multiple paths in the forwarding table even if they have different AS paths. This command is useful in scenarios where there are multiple valid paths to a destination and load balancing over all of them is desired.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_SPECIAL_HANDLE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error that need special handling has occured and been handled.), (Recommended Action: The error condition has been handled.Collect required information and contact TAC *None*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBCORE-7-STATUS
### Response:
(Severity: 7), (Category: SNMP), (Description: A Debug message), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL-5-PLL_T0_STATE_HOLDOVER
### Response:
(Severity: 5), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the T0 PLL output is in holdover, maintaining the most-recent frequency to which it was locked.), (Recommended Action: None. This is just a status indication.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_9_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-PAR_SERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Single bit mem parity error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEM-3-INIT
### Response:
(Severity: 3), (Category: L2), (Description: Failure occured during the initialization of CEM component Logs the reason for failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect the component logs, based on the message found.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-SYSDB_INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error occurs if the binding or iteration of the data list in the system database fails.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>), show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD-4-ERR_RETRY_TRANS_INIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-3-PARTIAL_INSERTED_CARD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the Shelf Manager, If receive 100 consecutive HB's from a card, and our OIRd info still says this card NOT_PRESENT, then the card is probably only partially inserted. Send out an ios_msg informing the user of the situation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_3_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-ERR_INFO
### Response:
(Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> show cef platform trace ipv6 all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EPM_SWITCH-3-GN2412_FAULT_NORELOAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: GN2412 device, which is used for communication to lower chassis LCs, is down), (Recommended Action: The board is not reloaded. At this stage collect the output of (admin)'show tech support control ethernet location <nodeId>')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE tunnel mode feature?
### Response:
The MPLS TE tunnel mode feature allows an MPLS TE tunnel to operate in either global or interface mode. In global mode, the tunnel is associated with the global routing table. In interface mode, the tunnel is associated with a particular interface and is only used to forward traffic arriving on that interface. Interface mode allows better control over tunnel utilization.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-REDIST_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: A RIB client library call for redistribution of routes failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LC_QFPCPUCTRL-1-FATAL_ERR_INTR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: CPU controller FPGA detected repeated parity errors on the A/D CPU bus or one of the SPAQFPBridgeCtrl ERP buses.), (Recommended Action: Reboot the board. If the problem persists, replace the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_UNKNOWN_FAB_DEF
### Response:
(Severity: 3), (Category: FABRIC), (Description: A file describing switch fabric components is not present on the router.), (Recommended Action: If the hardware installed in the router has changed, ensure that fabric control software has been upgraded to the correct version. If the correct software has been installed, report the problem to technical support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CONTROL_DRIVER-6-OBFL_ERASE
### Response:
(Severity: 6), (Category: DRIVER), (Description: This message indicates the progress of OBFL flash erase procedure. This functionality is to be used with caution, and it is supposed to be used by Cisco Support team only.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_OUTR_VLAN_SES_LMT_NO_REACHD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Outer VLAN on the given access interface is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-0-RSPI_ALIGN_OVFL
### Response:
(Severity: 0), (Category: PLATFORM), (Description: RxSPI align 16B memory overflow.), (Recommended Action: Reset the board.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM_PD-3-DLL_INIT
### Response:
(Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCI_HAL_SATORI-7-SPP_UNICAST_INFO
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Dumping packet data. %x- debug info.), (Recommended Action: debug info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_PW_INTR_SRC_PT_MISMATCH_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_PW_INTR_SRC_PT_MISMATCH_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-3-MSG_SEND_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and server. The MBI operation in progress will not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-4-STDBY_IPC_FLAP_STUCK_FLOW_CTRL
### Response:
(Severity: 4), (Category: ROUTING), (Description: The AIPC link between active and standby LSD has been stuck in flow control for an unexpected duration and is blocking data transfer between them. To recover from this state the affected AIPC link has been torn down and re-established.), (Recommended Action: Please collect show tech for mpls_lsd, aipcproxy and gsp for further investigation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-INSTALL_SYSTEM_ERROR_GLOBAL_NODES
### Response:
(Severity: 3), (Category: INSTALL), (Description: A system error occurred within the install system, not during an install operation. This may indicate a transitive problem within the system or a problem with the code.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repair' if anomalies are found. If the problem persists collect diagnostic information about the failure using the specific command and pass it to your TAC representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ASERVER_DOWNLOAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: Fabric control software failed to synchronize configuration details between the fsdb_server and fsdb_aserver processes. If the affected rack is being added to the system it cannot be brought into service. If the affected rack is already in service, then it cannot respond to fabric failures or changes.), (Recommended Action: No action is necessary. If condition persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-2-ERR_SHUTDOWN
### Response:
(Severity: 2), (Category: FABRIC), (Description: Fabric driver detected hardware errors and requested shelfmgr to shut down the node. But shelfmgr failed to do so. The card and its fabric ASICs should have been isolated from the system before the shutdown attempt.), (Recommended Action: Check the health of the shelfmgr process on the RP in its rack. If shelfmgr is healthy, and the card cannot self reload, then reload the card with the following command in admin mode: 'hw shut loc y/SMx/sp', where x is the SM module number that generated the error, y is the rack that it is in. If manual shutdown does not work, or if the error recurs, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-6-ASIC_PON_RESET_POST_SCAN
### Response:
(Severity: 6), (Category: FABRIC), (Description: Recover identified ASIC with a power on reset following ASIC scan.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_PARAMETER
### Response:
(Severity: 3), (Category: OS), (Description: Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DWDM-6-PP_EVENT_INJECT
### Response:
(Severity: 6), (Category: L2), (Description: This is for information that g709_api has been used to inject Proactive protection event with above mentioned attributes.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
AAAD-7-DEBUG
### Response:
(Severity: 7), (Category: MGBL), (Description: General debugging information for development and general diagnosis.), (Recommended Action: *NONE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-ETHERNET_DRIVER_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to open the ethernet device driver. %s- Unable to open ethernet driver, errno. %d- Reason for the failure.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
nrs-3-LOCKING
### Response:
(Severity: 3), (Category: OS), (Description: The server has either failed to aquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-5-OIR_REMOVED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-3-FILE_OPEN_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: Failed to open file), (Recommended Action: The file could not be opened to write ltrace configuration. This could be due to an invalid filesystem or other file operation error as indicated by the error message. If the error is due to disk space issues, try to free some space on the filesystem. Else Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER_MARK-4-NO_SLOT
### Response:
(Severity: 4), (Category: OS), (Description: A new request for marking segment came, but the marker reference array is already filled. Dropping this request.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-TIMESTAMP_LOWER_THAN_PREV_ACCEPTED
### Response:
(Severity: 3), (Category: IP), (Description: The timestamp received in the PBU is lower than the timestamp that was received in the previous PBU.), (Recommended Action: Note the NAI of the MN from the error message. Clear the binding using the following command. Check if the error goes away after receiving a new PBU after the binding is cleared. <CmdBold> clear ipv6 mobile pmipv6 lma binding nai <NAI> <NoCmdBold> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-4-OOR_WARN
### Response:
(Severity: 4), (Category: ROUTING), (Description: Maximum number of group accepted, either per interface or globally.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SNMP_IPC-3-CTRLMSGTIMEOUT
### Response:
(Severity: 3), (Category: SNMP), (Description: SNMP library incurred an internal software error. This error indicates sysnchronization lock crate failed), (Recommended Action: No recovery required.System auto recovers.pls collect logs Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PM-6-DUMP
### Response:
(Severity: 6), (Category: MGBL), (Description: An informational alarm upon dumping of the collected data), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-7-ISM_PD_LIB_CE_CONN_ERR
### Response:
(Severity: 7), (Category: INSTALL), (Description: Shows the error messages other than the CE connection errors), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PKG_PLAT-7-INTERNALERR
### Response:
(Severity: 7), (Category: INSTALL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-7-INSTALL_FINISHED
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
spp-4-TIMER_FAILED
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: SPP failed to initialize its periodic 1Hz timer, which is used to ensure that rollover of the system timestamp is handled correctly. It is likely that times reported by the following show commands will be incorrect as a result: - show spp node), (Recommended Action: Restarting the SPP process may help to resynchronize the system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_BUNDLE_LINK
### Response:
(Severity: 3), (Category: FABRIC), (Description: This is to indicate that the no. of down links in a bundle has changed from zero to non-zero or vice versa.), (Recommended Action: This message is expected if a cable is inserted or removed, or if a fabric card (or chassis) to which the cable connects is powered on or off, or rebooted. If a change to DOWN is seen in other circumstances it may be due to a hardware failure. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHNLZD_EFCM-3-ERROR_COMM_SPA_CLIENT_INIT
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred in the Extended Flow Control Manager. An attempt to set an entry in the Flow Control calendar failed. This error indicates that messaging between the SPA process and the Jacket process failed.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-AIB_REWRITE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'CTRLIO AIB Re-write failed.' 'This will not effect the process directly.' 'This operation is optional'), (Recommended Action: 'ISSU manager will use some alternate API' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-3-SYNC_ATTACH
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to attach sync message handler. An handler is not being setup for receiving all synchronous message. This involves exiting the upgrade_fpd or lc_upgrade_fpd process.), (Recommended Action: First try to restart the process ( upgrade_fpd or lc_upgrade_fpd) and check if the problem is recovered. If not do a switchover RP or reboot the router either manually or via Command line. If that too fails call Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OSPFv3-4-BADLENGTH
### Response:
(Severity: 4), (Category: ROUTING), (Description: The system received an OSPFv3 packet with a length field of less than normal header size or inconsistent with the size of the IPv6 packet in which it arrived. This indicates an error in the sender of the packet.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_HEARTBEAT_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected a problem in the internal state machine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PEXMGR-1-EXIT_INIT
### Response:
(Severity: 1), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-GR_NBR_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: An LDP GR session state change has occured - such as disconnected, reconnected, timed out, and cleaned up. This message appears only if the <Bold>mpls ldp log graceful-restart <NoBold> command is configured.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE-7-OPEN_ERROR
### Response:
(Severity: 7), (Category: OS), (Description: open system call returned an unexpected error Debug trace buffer initialization failed.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PQMON-6-QUEUE_LOW_THRESH
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: Informational message to indicate that a queue build-up has cleared up. This message coupled with the corresponding queue build-up message can give an indication of how long the queue build-up condition lasted.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATM_NETIO-3-LOAD_PATH
### Response:
(Severity: 3), (Category: L2), (Description: The env variable setting may not be set up for load path variable), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
vlea-4-IM_RESYNC_FAILURE
### Response:
(Severity: 4), (Category: L2), (Description: The VLAN EA process encountered an error during resynchonization with the IMP process. This error message either indicates that the VLAN EA process never received an end of replay message from IM, or it received an inconsistent dataset from IM.), (Recommended Action: The system will attempt to recover automatically. If this fails a restart of the IM process on the affected node is recommmended to aid recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-1-FLASH_READ_FAIL
### Response:
(Severity: 1), (Category: DRIVER), (Description: card_mgr has detected on this PID the running BB IOFPGA version on the box is not, compatible with the CPU-IOFPGA. Hence it is recommended to upgrade BB-IOFPGA first before going for CPU-IOFPGA upgrade in order to avoid bricking of te box.), (Recommended Action: In case the operation fails please collect logs 1. Syslogs 2. show tech card-mgr 3. show tech fpd 4. show tech obfl 5. show tech shelf-mgr 6. show tech ctrace 7. show tech fpd-serv)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What are the different types of BGP path attributes?
### Response:
The main BGP path attributes are\n- Weight (Cisco proprietary)\n- Local Preference\n- AS Path\n- Origin\n- Multi-Exit Discriminator (MED)\n- Community\""\n
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_EVAL_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: Your evaluation period has expired. Register the device with Cisco. Software upgrades will be blocked once the upgrade grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Customer should register the device to Cisco.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-CERR_REG_DLL_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to cerr_register_dll failure. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: *DEBUG*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-3-ERROR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Service Platform Manager encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-S2L_REROUTE
### Response:
(Severity: 5), (Category: ROUTING), (Description: The specified sub LSP has been rerouted.), (Recommended Action: None. This is a solicited message (by 'logging event sub-lsp reroute' \ interface destination configuration) and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-LPTS_UDP_POLICY_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Installation of LPTS UDP Hello filters for targeted LDP neighbors failed. This failure can prevent sessions to LDP targeted neighbors from being established.), (Recommended Action: Verify the number of targeted neighbors, either configured or L2VPN. Check 'show lpts pifib..' for statistics and limits.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-MEMORY_RECOVERY_KILL_NON_SYSMGR
### Response:
(Severity: 6), (Category: HA), (Description: The process with the indicated name and pid has been killed in an attempt to recover system memory. Since this process is not managed by sysmgr, it may not be restarted. The process can be manually restarted if desired, but may continue to consume large amounts of memory.), (Recommended Action: The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-MSG_HNDLR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABARBITER-2-FATAL_FAULT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter ASIC hit fatal fault.), (Recommended Action: Fabric arbiter asic hit fatal fault. Please try reloading the card using command 'hw-module location <> reload' to recover. If the error message persists after a few reloads of the card, please contact tech-support)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDCON-4-STANDBY_NOT_READY_ALARM
### Response:
(Severity: 4), (Category: HA), (Description: Set: When the standby remains in not ready state for a prolonged period. Cleared: When the standby is removed, reset or goes ready.), (Recommended Action: Collect system log information. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB_IPV6-3-PARAM_ERR
### Response:
(Severity: 3), (Category: L2), (Description: Errors in params passed to functions in IPV6 FIB platform.), (Recommended Action: Please collect the required logs Also notice if the error message is transient or persistent. If errros persist, report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOT1X-3-PORT_CONTROL_ADD_CLIENT_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: Failed to add client for port-access.), (Recommended Action: Check the platform logs for error.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-4-ERR_LTRACE_INIT
### Response:
(Severity: 4), (Category: FABRIC), (Description: The Fabric driver could not open/initialize the ltrace buffer. The Fabric driver and the system should stll function as normal, with the exception that ltrace will not be available for sfe_drvr process.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSVP-3-RSVP_LSP_RESOURCE_EXHAUSTED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Resources to setup new LSP's are exhausted.), (Recommended Action: This condition will persist until some LSP's are brought down.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PERF_MEAS-5-PM_DELAY_EXCEEDS_THRESHOLD
### Response:
(Severity: 5), (Category: ROUTING), (Description: PM delay metric has exceeded threshold specified in the performance-measurement delay-profile.), (Recommended Action: None. This is a solicited message when performance measurement delay metric on interfaces, SR Policies, RSVP-TE tunnels has exceeded threshold and advertisement logging delay-exceeded config in corresponding profile is enabled. It is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-SERVICES_PLIM_MISPLACED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Services PLIMs in the lower slot (s = 8..15) may only be powered on if there is no Non-Services PLIMs powered on in the paired upper slot (s-8).), (Recommended Action: Place the Services PLIM in an upper slot 0 - 7, or in the lower slot (s = 8..15) where there is no Non-Services PLIM in the upper slot (s-8).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB_QUERY_ORA-3-ORABUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was an internal software error in the routing policy library and as a result routing policy may not be applied correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-SYSDB_STARTUPLIST
### Response:
(Severity: 3), (Category: OS), (Description: Unable to prepare startup list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EIGRP-6-EVENT
### Response:
(Severity: 6), (Category: ROUTING), (Description: An EIGRP event logged into the trace buffer.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-CHKPT_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-RX_UNEXPECTED_MSG_TYPE
### Response:
(Severity: 4), (Category: ROUTING), (Description: An unexpected message type is received from peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-RESYNC_END_ERROR
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon failed to resync with SPIO upon startup or a process restart. This is due to an LWM failure when sending a message between the main and packet threads within Ethernet Link OAM daemon. The operation will not be retried - the internal state of Ethernet Link OAM may not match the global system state.), (Recommended Action: Try restarting the Ethernet Link OAM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS VPN central services feature?
### Response:
The MPLS VPN central services feature allows MPLS VPN providers to offer centralized services, such as Internet access, to VPN customers. It enables traffic from VPN sites to be routed to a central site for services before reaching its final destination. Central services VPNs are implemented using route targets and BGP route importation at the central services PE router.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
G_PLIM_QOS-3-ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: %s - Sysdb error message), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_SES_THRESHOLD_NOT_EXCD
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSP_CPUCTRL-2-DTI_PROGRAM_ERR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: RSP DTI FPGA program failure with latest FPGA version. FPGA is programmed with golden image version.), (Recommended Action: Reset the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-NOT_LMA_FOR_THIS_MOBILE_NODE_1
### Response:
(Severity: 3), (Category: IP), (Description: Default MN profile is enabled for this LMA. But the default MN profile is not configured under the domain.), (Recommended Action: Either configure default MN profile under the domain or remove default MN profile configuration from the LMA configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SSP_INTR_SP0_RX_NEOP_ERR_P_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SSP_INTR_SP0_RX_NEOP_ERR_P interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL0_HI_OVERRUN_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL0_HI_OVERRUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLIM_LIB-3-ERROR
### Response:
(Severity: 3), (Category: L2), (Description: A fatal error occurred in the plim library driver which involves exiting the process.), (Recommended Action: collect the info from 'show diag', 'show hfr', 'show inv' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE path-option loose feature?
### Response:
The MPLS TE path-option loose feature allows an explicit path to be specified using a combination of strict and loose hops. Strict hops must be directly connected to the previous hop, while loose hops are not required to be directly connected. Loose hops provide more flexibility in the path calculation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ANCP-4-MEM_THROTTLE
### Response:
(Severity: 4), (Category: IP), (Description: ANCP process has received an event that it's memory usage has reached its budgeted threshold. Continued increase in memory usage could result in restart of ANCP process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PCIE-6-BUS_INFO_THRESHOLD_EXCEEDED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID aggregator was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to troubleshoot an L2VPN not passing traffic?
### Response:
To troubleshoot an L2VPN not passing traffic, verify the xconnect status, check the interface and pseudowire status, and ensure correct encapsulation and MTU settings. show l2vpn xconnect
show interface GigabitEthernet0/0/0
show l2vpn atom vc
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ES_ACL-6-ESACCESSLOGV
### Response:
None
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP soft reconfiguration in IOS XR?
### Response:
BGP soft reconfiguration in IOS XR is configured to allow the router to store received routes without modifying the BGP table. router bgp 65000
neighbor 203.0.113.8
soft-reconfiguration inbound
commit
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-7-INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the LOCSW module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-EXIT_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The specified process failed to notify the system manager that it was exiting. In very rare cases, this could result in the process not being restarted when it ought to be.), (Recommended Action: If the process in not running and it ought to be (ie, there is CMPP configuration remaining), then remove all CMPP configuration, commit this change, then re-apply the configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_CW_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_CW_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-UNEXPECTED_VALUE
### Response:
(Severity: 7), (Category: SYSDB), (Description: The server has come across an unexpected value for the specified parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CEMA-3-MISMATCH_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A process on the line card that manages a SPA was restarted. As a part of restart, a mismatch was detected between user specified configuration and the actual configuration of SPA hardware.), (Recommended Action: The mismatch can be service affecting in certain cases. Please check if the entity specified in the error log and all it's children are functioning correctly. Contact Cisco TAC for further assistance.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ncs540l-1-RESTART_NOT_SUPPORTED_SUPPL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message associated with RESTART_NOT_SUPPORTED See RESTART_NOT_SUPPORTED for explanation), (Recommended Action: See RESTART_NOT_SUPPORTED for explanation)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL0_HI_EOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL0_HI_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-ASIC_ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The sfe-drvr process cannot initialize the infrastructure allow error capturing function for the PODs on the fabric card.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-FAIL_ADJADD
### Response:
(Severity: 6), (Category: ROUTING), (Description: Failed to create adjacency to the displayed IS via the displayed interface for the reason specified.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng tunnels' command in IOS XR?
### Response:
The 'mpls traffic-eng tunnels' command is used to enable MPLS Traffic Engineering on an interface. It allows the interface to be used as part of an MPLS TE tunnel path. MPLS TE tunnels are used to provide explicit paths for traffic with specific bandwidth and other constraints.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPMCE-3-ERR_KD_MMAP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to mmap to Kernel dumper information in syspages.), (Recommended Action: This is a critical error which will cause process to restart for error recovery. Collect the syslog or console log. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SYSDB_BIND_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Sysdb bind error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ENTITLED_SESSIONS_EXCEEDED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the number of sessions is over the limit of the licenses available.), (Recommended Action: Install more licenses or move a license from another line card.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_BDI_DEMD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_MEMORY
### Response:
(Severity: 3), (Category: MGBL), (Description: 'mirror encountered a memory error (most likely ran out of memory), see message for more details'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error during initialization.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PIM_MLDP_LIB-3-MLDP_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An error occured while reading requests or processing a write request from the pim mldp consumer. The specific reason is provided in the message displayed. This message indicates that an error occurred in the ENS or NRS communication channel between the PIM and the MLDP process on the consumer side.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mlib trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mlib trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show pim trace mldp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show pim trace mldp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show buffers<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show buffers<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPMCE-0-ECC_REBOOT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Large numbers of single bit ECC errors have been detected on the sp node in the past hour. The node will be rebooted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-PRINT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Print the data for debug purpose or for change of states), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-PROC_AS_IO
### Response:
(Severity: 3), (Category: MGBL), (Description: IO failure on process address space. Unable to detect board type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-FILE_WRONG_VERSION
### Response:
(Severity: 7), (Category: OS), (Description: The file has wrong version.), (Recommended Action: Informational only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-2-TCAM_WRITE_PARITY_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BULKSTAT-4-SEC_URL_UNREACHABLE
### Response:
(Severity: 4), (Category: SNMP), (Description: The Collected bulk data file could not be successfully transferred to the secondary network management station address destination specified in the error message. This condition can occur because the secondary network management station address is not configured or the configured secondary network management station address is unreachable. If a retention interval is not configured, the bulk data file will be immediately deleted. If a retention interval is configured, retries will be attempted for the configured number of times.), (Recommended Action: Check the connectivity to destination indicated by secondary network management station address indicated in the error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOL_DEMB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-LOSS_OF_SYNC_FIA10
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on interlaken interface on egress mux and fia 1), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-NMON_CFG_APPLIED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that node is configured in NMON (No MONitor) mode by the user and would not be reloaded by shelfmgr until restored back to MON config. Primary purpose of configuring node in NMON is to analyze and debug the node or its card behavior. Exception: shelfmgr ignores node's NMON config on occurence of a critical alarm at node's end.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-ENV_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-FGID_REMOVE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-RSVP_FRR
### Response:
(Severity: 5), (Category: ROUTING), (Description: RSVP triggered FRR on an LSP.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MAX_LEN_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error FIA 10 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_VPLS-3-CERR_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-PATH_ELEM_LIMIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: An attempt was made to create a path element beyond the maximum limit. The advertisement and installation of the network in the BGP table may be inconsistent with additional-paths configuration.), (Recommended Action: Revisit additional-paths configuration and the total number of paths learnt for a particular network.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the protocol shutdown command in IS-IS?
### Response:
The protocol shutdown command is used to administratively shut down IS-IS on a router. When IS-IS is shut down, the router does not send or receive IS-IS packets and all IS-IS adjacencies are torn down. This command is useful for gracefully shutting down IS-IS during maintenance or troubleshooting.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-FAB_MCAST_SC0_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A problem is detected by loopback test to the first Crossbar chip (chip#0) on this RSP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-LABEL_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing a label in the label table Most likely this is a fatal error. Only recovery is to restart the isis process), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-PROC_ROLE_CHANGE
### Response:
(Severity: 3), (Category: OS), (Description: Failed to register the role change with the system manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-MPLS_UNSUPPORTED_BGP_LU_CHAIN
### Response:
(Severity: 4), (Category: ROUTING), (Description: In label create/update, bgp lu chain is invalid. Most often an intermediate state), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-WARNING_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace all loc <slot number>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-2-LOCKDOWN
### Response:
(Severity: 2), (Category: L2), (Description: A fatal error has caused the CPP driver to LOCKDOWN.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR2_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-2 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-GET_CONFIG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to get configuration details, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-BADPTCL_DUMP
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Particle body corruption is detected. This message follows a BADPAK message and dumps the first few bytes of the particle body and the last few bytes of the one before.), (Recommended Action: None. This is message is only for debugging purpose.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTS1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-KEY_DEACTIVATE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: A call to the Key Chain library failed. This may indicate an internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-INCORRECT_RSI
### Response:
(Severity: 3), (Category: OS), (Description: 'Received a RSI node id for a GSP group which is different than an expected value.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-4-ERR_PKT_API_HANDLER
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured whilst handling an event received from the packet thread.), (Recommended Action: *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-HEALTH_CHK_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: Due to the error shown, sysdb cannot start the health check on sysDB sub system.), (Recommended Action: In most cases, this would be transient error. However, if this happens repeatedly, please collect 'show tech sysdb'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-COUNT_HIGH
### Response:
(Severity: 7), (Category: SYSDB), (Description: SysDB connection count has crossed the threshold.), (Recommended Action: This might be normal. In case the process in message crashes, copy process core file and /tmp/sysdb_debug_conn_threshold_output_*.txt files and contact Cisco Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-1-LOG_ALERT
### Response:
(Severity: 1), (Category: OS), (Description: An Error message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-3-PTMM_INIT_PROC_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was encountered while initialising the PLU/TLU memory manager This condition can occur during: 1. Memory init 2. Checkpoint Init 3. PLU/TLU specific Init 4. EDM Init), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-INGRESSQ_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to create one of the ingressq queues.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-IONOTIFY_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: Event-manager is unable to reregister for subsequent notifications with a server.), (Recommended Action: This is an internal error and should be reported to TAC if all attempts fail. Please collect the output of 'show proc files <jobid> detail location <location>' for the process in question.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TEJAS_DRV-6-GENERIC_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message is used to report TEJAS DRIVER generic info.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install prepare command in IOS XR?
### Response:
The 'install prepare' command is used to prepare the system for an installation operation. It checks for available disk space, performs configuration checks, and determines which processes will be affected by the installation.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-EDM_INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Initialization of the EDM server failed. The process will be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_5
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 HoA request option is not received in the PBU. This happens if the service configured for the MN on the LMA is IPv4 or Dual and that on the MAG is not matching.), (Recommended Action: Note the CoA address, IMSI (if available) and NAI from the error message. Run the following command on the MAG that corresponds to the above CoA address or IMSI. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config | section mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config | section mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the service type of the MN or Logical-MN (corresponding to the NAI noted above) under domain configuration and Logical-MN configuration. Run the following command on the LMA. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config ipv6 mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config ipv6 mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the service type of the MN or Logical-MN (corresponding to the NAI noted above) under domain configuration. If the service type configired on the MAG and the LMA is not the same, reconfigure matching service type on the MAG and/or the LMA. If the issue persists, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-PHY_OPTICS_SERDES_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Serdes signal fault detected/cleared between phy and optics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_OPEN_SECURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: An attempt to open a secure file failed.), (Recommended Action: 'Retry the operation. If this message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPB_I2C-7-BUS_UNHANG_SUCCESS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The I2C bus hang has been cleared successfully. I2C communication is restored on the bus.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCV-5-INVALID_VLDN_METADATA
### Response:
(Severity: 5), (Category: MGBL), (Description: This failure indicates that some validation metadata present on the device could not be loaded. This is typically indicative of validation rules that reference a schema path in an optional package that is not currently installed. In such cases it does not present a problem because the corresponding configuration is not supported. As such this message can usually be ignored unless issues with configuration validation functionality are seen.), (Recommended Action: None, unless further issues with configuration validation are seen, in which case, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-TRANSFER_FAILED
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: Failed to copy the specified file onto the host. Run 'show nv satellite install verbose' for more information.), (Recommended Action: Check the specified file exists, and if it is on a remote server check the link to that server is valid. Then re-try the operation.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: IP), (Description: The rlogind encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-HOST_ERROR_EVENT
### Response:
(Severity: 3), (Category: DRIVER), (Description: HOST has reported a error event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_PKT_F3_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 3 single bit error.), (Recommended Action: None.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-FILTRVIOLERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: A client tried to modify a route attribute not owned by it), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTQ2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FDI-3-ERR_TLV_HDR
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB/Driver encountered a FDI message containing structure(s) which do not have a TLV header, or the message is too short to contain the structure(s) specified in the TLV header. This means that the TLV encoding code is missing and needs to be added to the appropriate structure. After an occurence of such error, it is likely that FSDB and Driver have gone out of sync.), (Recommended Action: Capture information as specified in the required_info section. Restart FSDB/appropriate driver (from whichever process context this error message was logged) to clean any 'out of sync' issues.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MGMT_HOST_IP_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The show line command was unable to get the host IP address.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-INVALID_DEVICE_ID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Device identity readback value is incorrect), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-CARD_POWERDOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Shelf Manager component has requested power disable on a line card or secondary RSP.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-BAD_DOI_NOTIFY
### Response:
(Severity: 3), (Category: SECURITY), (Description: IKE found bad DOI notify), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-1-IPACCESSDLSYM
### Response:
(Severity: 1), (Category: ACL), (Description: This message indicates that a process could not find the specified DLL name. The name of this DLL is included in the message. Functionalites of the process that failed to load this DLL will be impacted.), (Recommended Action: This message may occur during process initialization. Please try restarting the process that issued this error message with the command. <CmdBold>process restart <process_name> location <node id><NoCmdBold>. Process name should be printed in the message already.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-3-OUT_OF_SYNC
### Response:
(Severity: 3), (Category: IP), (Description: One or more control messages could not be delivered, after several retries, to the partner TCP stack. This can leave the TCP stacks in a state that prevents NSR from being restored. However, periodic self-audit should correct the mismatch in state and should result in NSR being restored.), (Recommended Action: This may be due to a very basic problem with the communications infrastructure between the TCP stacks running on different nodes. Please collect the following information and restart the standby TCP process.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-4-OPERATION_ISSU_ABORT_DONE_REMINDER
### Response:
(Severity: 4), (Category: INSTALL), (Description: This message acts as a reminder that the ISSU has been held following an abort to enable system level triage.), (Recommended Action: The ISSU has been held following an abort to enable system level triage. When complete issue command <cmdBold>install activate issu abort cleanup<noCmdBold> or <cmdBold>install deactivate issu abort cleanup<noCmdBold> (as appropriate) to restore the system's RP redundancy and enable another ISSU.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-SW_FAIL
### Response:
(Severity: 3), (Category: DIAG), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of BGP soft reconfiguration?
### Response:
BGP soft reconfiguration allows the router to store a copy of the routes received from a neighbor before any inbound policy is applied. If the inbound policy is changed, the stored routes can be re-evaluated without tearing down the BGP session. It is enabled with the neighbor soft-reconfiguration inbound command.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-WHITEBOX_EP_DI_MISMATCH_DETECTED
### Response:
(Severity: 3), (Category: INFRA), (Description: Rx and Tx links terminate on different endpoint ports.), (Recommended Action: Determine if the event was due to a fault. If so, the root cause need wiring/connectivity check.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-BENCH_MODE_DETECTED
### Response:
(Severity: 4), (Category: DRIVER), (Description: The BENCH MODE is used for debugging the card out of the chassis, the jumper or DIP switch to enable this feature should not be set if the card is being inserted in the chassis.), (Recommended Action: Remove the setting before inserting the card back to the chassis.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-PROXY_ETR_REACHABILITY_CHANGE
### Response:
(Severity: 5), (Category: IP), (Description: 'No route to reach proxy ETR so traffic drop is expected.'), (Recommended Action: 'Ensure router has connectivity to proxy ETR.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while attempting to create an event manager. This failures affects the ability of the process to service various messages / pulses from other threads / processes. This facility is deemed crucial and the process automatically restarts on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SYSDB_DELETE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The DAD library attempts to delete the old protocol information before writing out the new information. This delete operation failed for the above reason.), (Recommended Action: restart policy_repository and check for re-occurence of issue)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-UPGRADE_CFP2_LASER_ON
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot do FPD upgrade of CFP2 when its laser is on.), (Recommended Action: Shut the Optics Controller corresponding to this CFP2 and try upgrade again.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_0_RX_FRAME_ERR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-0 received an errored frame interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_CFGMGR_ADD_DELETES
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_BUF_CRC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected excessive input buffer CRC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IOR-4-LTRACE_INIT
### Response:
(Severity: 4), (Category: INSTALL), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: This indicates that the ltrace infrastructure could not be initialised. It only impacts ltrace message logging and has no impact on the functionality of the system.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
XCVR-6-REMOVAL
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message which notifies that XCVR is removed from particular location %s - xcvr type), (Recommended Action: *NNOE*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CHKSUM_ERR_0_FIA_1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Checksum error - 0 from FIA on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETH_SRVR-3-NOT_SUPPORTED_CARD_TYPE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This card is a line card that does not have a switch. Hence switch statistics cannot be cleared.), (Recommended Action: No action is required)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RCMD-6-SERVER_INIT
### Response:
(Severity: 6), (Category: ROUTING), (Description: Provides indication that the RCMD feature has been enabled and monitoring is starting), (Recommended Action: No action required. If this message appears repeatedly then it indicates that RCMD is restarting possibly due to some error. For restart, previous generated reports which are not archived will be lost and this needs to be reported to Technical Support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SERVICES-3-ATTACH_HANDLER
### Response:
(Severity: 3), (Category: IP), (Description: The domain_services process failed to attach an event handler to receive event messages sent to it. The error is normally seen during initialization of DNS process (i.e. domain_services) or while trying to fetch hostname or address through DNS query. Such errors should go away with process restart), (Recommended Action: Please note down the stage at which this error message is seen i.e during boot or later stages.Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CARD_MGR-6-CTRL_ETHER_OIR_REMOVE_EVENT
### Response:
(Severity: 6), (Category: DRIVER), (Description: card_mgr has detected eobc remove oir event for qsfp/sfp interface), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SYNC-3-RUNTIME_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Error during event loop for domain_sync daemon), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-RESTARTING
### Response:
(Severity: 7), (Category: SYSDB), (Description: The SysDB server is unable to function due to a problem with one of its modules. The only hope of recovery is to restart. If the problem persists, the card will be automatically reloaded.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_12_HIGH_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRP-3-ERR_SRR_VER_MISMATCH
### Response:
(Severity: 3), (Category: L2), (Description: SRR has detected incompatible versions with other nodes on the ring and cannot inter-operate.), (Recommended Action: Update the software image on all nodes of the ring to the same SRR version.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the significance of the 'install commit' command in Cisco IOS XR?
### Response:
The 'install commit' command in Cisco IOS XR makes the added software packages permanent, ensuring they remain active across system reboots.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-3-FAN_TRAY_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Fan tray is failed due to i2c hung even after all possible recovery action.), (Recommended Action: This condition indicates a potential hardware problem with the fan tray.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM-3-CM_MODULE_INIT
### Response:
(Severity: 3), (Category: TOPOLOGY), (Description: Could not connect to event connection manager.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-AUTOBW_REACH_MIN_LIMIT
### Response:
(Severity: 5), (Category: ROUTING), (Description: This auto-bandwidth tunnel has a minimum bandwidth request. It is trying to allocate less bandwidth than that limit. TE will limit the bandwidth request to its minimum value.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFM-3-POOL_CONFIG_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: BFM encountered pool state error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APIV-3-LTRACE_DISPLAY_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates failure in initializing the tracing module.), (Recommended Action: Please provide the output from the following commands on the node where the problem occurred, if contacting TAC: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - show logging - show ipcp sap all location <ISM> - show ipcp trace reverse location <ISM> - show controllers service-module apiv sep summary loc <ISM> - show controllers service-module apiv lcp summary loc <ISM> - show controllers service-module ipcp channel loc <ISM>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_GBL_CFG-4-ERR_DBG_TRACE
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error initializing its Debug and Trace The error message describes what operation has failed and why it failed. This is a fatal error and the PPPoE GBL process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
security_efivars-3-INIT
### Response:
(Severity: 3), (Category: MGBL), (Description: A failure occurred during the initialization of the process. This may have resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ACE_LC-0-ACE_SYSLOG_EMERG
### Response:
(Severity: 0), (Category: SECURITY), (Description: ACE SPA SYSLOG message), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-BAD_MESSAGE
### Response:
(Severity: 3), (Category: OS), (Description: PlaceD received an unexpected message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_DISC-3-PARTICLE_MEDIUM_POOL_DEFINE_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Medium pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SCONBKUP-3-INTERNAL_FATAL
### Response:
(Severity: 3), (Category: MGBL), (Description: Restarting the process as it is not in a recoverable state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-DEV_QSFP_COMPLIANCE_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A compliance error was detected during QSFP+ initialization. A compliance error is due to unsupported optics, checksum error, EEPROM CRC error, vendor data error, or decryption error. The QSFP+ is the pluggable optics on the line cards. QSFP+ initialization may happen when linecard boots up, QSFP+ OIR and line card process restart. The optics will not be enabled if an QSFP+ compliance error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-4-MARTIAN_SOURCE
### Response:
(Severity: 4), (Category: ROUTING), (Description: Information related to Martian source reaching IGMP.), (Recommended Action: No action required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ETHERNET_LOOPBACK-3-ERROR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize error messaages in the platform Ethernet loopback component), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_XAUI_PLL_LOCK_2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI PLL not locked on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-4-CARD_POST_TRIGGER
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The card is reloaded due to a faulty HW/ASIC. The IFD image will be loaded and diagnostic tests on the falling device will be performed. The card will then be reloaded with XR image if nothing wrong in the device; otherwise it will be placed IN-RESET mode.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
T1E1_LNM-3-GENEVENT
### Response:
(Severity: 3), (Category: L2), (Description: An error has occurred in the link noise monitoring.), (Recommended Action: Copy the error message exactly as it appears and report it to your technical support representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR-0-MAX_BOOTREQ_BRINGDOWN
### Response:
(Severity: 0), (Category: PLATFORM), (Description: This message is generated when the node has failed to boot up repeatedly and indicated to the shelfmgr that the node reset itself each time. Therefore shelfmgr eventually holds the node IN_RESET state until a manual reboot request is issued against it by the user. The probable cause is an unexpected error on the node leading to the repeated boot failures.), (Recommended Action: 1- Please start out by inspecting the active RSP console logs and determine if there is repeated process crashes or any PFM errors reported from the node or if there is any timeout errors declared by the shelfmgr against the node. 2- If no such indication is seen in the RSP logs, then the next step is to inspect the affected node's console output itself to see if there is any errors leading to node resets are reported on it. 3- If the above actions identify the root cause, please note it, collect the following information and provide this data to your Cisco technical representative. 4- Data to collect: - The full console output of both RSPs and the node console output if available. - The attachCon output for the IN_RESET node, when it was rebooted in step 3. - #show logging - #show tech-support shelfmgr - #show reboot history location <affected location> - #show pfm location <affected location> - #show reboot pcds location <affected location> 5- If the root cause was not identified in above steps, the next step is to reboot the node IN_RESET and see if an error that identifies the root cause occurs and if the node can recover from the problem. It is important to have the LC console data connected at this point. If this is not feasible, then please issue the 'attachCon <affected location>' from the RSP Aux terminal immediately after rebooting the node: - #hw-module location <affected location> from the RSP console - #attachCon <affected location> from the RSP Aux terminal 6- Please contact your Cisco technical representative and provide the collected information to them. Please include the node console/attachCon output collected.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSM-7-NOTIFY_REGISTER_FAILED
### Response:
(Severity: 7), (Category: OS), (Description: A application requested database notification could not be placed in the QSM notification database. An error will be returned to the client process.), (Recommended Action: Debug message only. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-ROUTE_PROG_FAILED
### Response:
(Severity: 2), (Category: ROUTING), (Description: HW resources in OOR or failed to prog route, we need to reload the LC for failed prefixes to work. There is no re-try.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-DEC_A_PKT_LEN_ERR_0
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Packet with invalid length encountered by decoder A on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MFWD_HFR-7-ERR_BAG_REGISTRY
### Response:
(Severity: 7), (Category: ROUTING), (Description: The MFWD-HFR library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LS_PRM-3-REGISTRATION_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The specified error happened during registering with the primitive resource manager.), (Recommended Action: Please collect output of the following commands: show platform show log show process blocked location <>)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE_SLSP-4-SHOW_WARNING
### Response:
(Severity: 4), (Category: ROUTING), (Description: The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.), (Recommended Action: Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MACLEARN-3-INIT_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to intialize maclearn ltrace/debugs/cci APIs.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SFP-3-LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Tx power less than or equal to the low Tx power warning threshold. The SFP is the pluggable optics on the line cards. The Tx power threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Replace the SFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFC_WATCHDOG-5-GLOBALPAUSE
### Response:
(Severity: 5), (Category: PLATFORM), (Description: PFC enabled interface receiving unexpected Global pause frames), (Recommended Action: Check why the PFC enabled interface is receiving unexpected global pause frames)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SLA-4-UNEXPECTED_PROTOCOL_DATA
### Response:
(Severity: 4), (Category: INFRA), (Description: An error has been detected in the information passed to the SLA infrastructure by the protocol process. This could cause missing SLA results or other unexpected behaviour.), (Recommended Action: If unexpected behaviour is seen, it may be possible to recover by restarting the protocol process on the affected node.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-CM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed CM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LIBPARSER-7-ERR_SYSDB_UNREG_NOTIFY
### Response:
(Severity: 7), (Category: MGBL), (Description: 'The sysdb operation failed. Error test is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM_PD-2-ICC_MAID_EXCEEDS_MAX_SUPPORTED
### Response:
(Severity: 2), (Category: L2), (Description: CFM-PD found that configured ICC MAID exceeds maximum supported. HW supports maximum 15 ICC Based MAIDs.), (Recommended Action: please check if configured ICC MAIDs are more than 15 entries and remove the exceeding ICC MAID configuration.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_CHANNEL_CONNECT
### Response:
(Severity: 3), (Category: SECURITY), (Description: The system could not connect to a channel.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-4-MIB_DLL_ERROR
### Response:
(Severity: 4), (Category: L2), (Description: An error was encountered in the Frequency Synchronization MIB DLL. Some functionality of the Frequency Synchronization DLL may be impaired. The error message contains details about the source of the error.), (Recommended Action: It is unlikely that this condition will recover automatically, restarting the SNMP agent process may be required. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-EA_NOMEM
### Response:
(Severity: 3), (Category: FORWARDING), (Description: The Tunnel-IP EA process could not allocate memory needed to update tunnel interface.), (Recommended Action: Check the box for processes with excessive memory in the location as seen in error message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-CONFIG_FLOW_MEMORY
### Response:
(Severity: 3), (Category: OS), (Description: There is insufficient memory for the flow configuration. All flows will be assigned default characteristics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ESD-2-EOBC_LINK_DOWN
### Response:
(Severity: 2), (Category: INFRA), (Description: When the Ethernet Switch Driver (ESD) process ascertains that EOBC link between CPU and control ethernet switch has not come up in pre defined time frame, it initiates reset recovery operation. This involves requesting reload of the said card.), (Recommended Action: No action further action is needed. However, the recommended action for the originally reported switch error should be followed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SIGNALCORE_INFO
### Response:
(Severity: 4), (Category: OS), (Description: Debug core info), (Recommended Action: Information of the crashed process. Ignore.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-3-LICENSE_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ASR9K Mobile license is required for syncE/PTP features to work correctly. The licence check failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FGID_LIB-7-ERR_DEBUG_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: The FGID library failed to initialize debug. The FGID component and the system should still function as normal, with the exception that the debugs will not be available for FGID library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SYSMGR-1-ALERT
### Response:
(Severity: 1), (Category: OS), (Description: Action must be taken immediately. Possible resource shortage or coding error.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SSHD_SYSLOG_PRX-3-ERR_SYSDB_SET
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TCP-3-EAOPT_RECV_UNSUPPORTED_MAC
### Response:
(Severity: 3), (Category: IP), (Description: Received a TCP packet with the Enhanced Authentication option header with a MAC(Message Authentication Code) algorithm value not supported, from the specified peer.), (Recommended Action: Check the configuration of the peer specified and reconfigure it so that its keychain only has cryptographic algorithms supported by IOS-XR.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-3-ERR_INTERNAL
### Response:
(Severity: 3), (Category: FABRIC), (Description: An internal error occurred that was expected to succeed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-NODE_BREQ_TIMEOUT_RESET
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card is being reset because of a failure to get valid boot request from a specific node.), (Recommended Action: If the problem persist, remove and re-insert the affected card to recover from this failure. If the target node is an RP or DRP, access the console to verify the setting of ROMMON confreg value, make sure that is not set to 0x0.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-FIA2NPU_0_PKT_MINLEN_ERR_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_14_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SPIO_PD-3-FAB_THREAD
### Response:
(Severity: 3), (Category: PLATFORM), (Description: New thread creation to connect to Fabric server failed. Packet path initialization at RP errored.), (Recommended Action: Restart the spio_ma process. 'process restart spio_ma location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VKG_PM-3-INTERFACE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The error occurs due to failure in creating the interface.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLACED-3-ADR_INIT
### Response:
(Severity: 3), (Category: OS), (Description: Unable to initialize atomic descriptor ring.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FINT_N2N_NETIO-3-SET_MAPPING_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FINT n2n protocol dll could not set certain internal protocol mapping. This should not affect the functionality of any other protocol traffic, but might affect n2n protocol traffic only.), (Recommended Action: Try restarting the netio process. This could sometimes help fix the problem as the set mapping will be trigged again and we might not hit the failure the 2nd time. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ZL-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Zarlink driver encountered a fatal memory allocation error), (Recommended Action: Check how much memory is available at the location where the error was reported. If the system has enough memory and if the error message persists, contact TAC with required_info.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LAMPTEST-6-REJECTED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Lamp Test cannot be executed because another lamp test operation is already in progress.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_MAC_DISABLED
### Response:
(Severity: 4), (Category: OS), (Description: The punt flow trap sampler detected an excessive flow from a source MAC address. This could result in a denial of service to other interfaces. Penalty-policing has been disabled by configuration so the interface will not be placed in the 'penalty box.'), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IP_ARM-6-RTRID_CFG_DEPRECATED
### Response:
(Severity: 6), (Category: IP), (Description: The rouer id configuration CLI has been deprecated. This command has taken on effect.), (Recommended Action: None. This is an informational message to tell user that router id configure CLI has been deprecated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-MAC_LIMIT_BD_CLEAR
### Response:
(Severity: 6), (Category: L2), (Description: Number of MAC addresses in the attachment circuit has gone below the threshold of the configured maximum. If MAC learning or/and unicast flooding was disabled on the bridge-domain due to MAC limit action, then it would get re-enabled automatically.), (Recommended Action: No particular action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_BRIDGING-7-INVALID_SET_MAC_OFFSET_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Received an invalid MAC offset while setting mac bitlist datastructure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFM-6-TOO_MANY_TLVS
### Response:
(Severity: 6), (Category: L2), (Description: While processing a received CFM PDU, more than the supported number (32) of TLVs were found. This is very unlikely to occur in normal operation, and may therefore indicate a denial-of-service attack.), (Recommended Action: Use CFM debugging ('debug ethernet cfm packets') to determine from where the problematic packets are originating. If the packets are from a trusted source and are expected, modify the configuration on that host to reduce the number of organisation-specific or otherwise unknown TLVs contained in the packet (ie TLVs not defined in the CFM standard, IEEE 802.1ag).)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-PARAMETER
### Response:
(Severity: 3), (Category: SECURITY), (Description: RADIUS was passed an invalid parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-6-ERR_EVM_EVENT_BLOCK
### Response:
(Severity: 6), (Category: L2), (Description: This is an unexpected error. The PPP MA process may recover by itself, or it may need to be restarted to recover.), (Recommended Action: Restart the affected PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_ASIC_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while initializing the CPU control ASIC to either receive packets from the fabricq ASIC or transmit packets from the ingressq ASIC. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If problem either persists (following a process restart) then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-FGID_MARK_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: Failed during remarking the FGIDs. The error can occur during: - remarking of FGID array - performing FGID mark done.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-NPU_0_EGR_Q_ERR_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-NSF_WARN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Unexpected resource error during NSF initialization. This may result in NSF failures.), (Recommended Action: Free some resources and restart RIB *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IMUX-1-RX_MTA_FRM_SYN_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX encountered Rx serdes lane metaframe sync error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-2-LANE_3_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-RD_LOCK_RECURSIVE
### Response:
(Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to lock a network entry in the BGP Table database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_15_HIGH_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-SLOTORDERINIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to initialize slot order failed. The error is displayed in the message'), (Recommended Action: Collect show nvgen trace, show logging and send this to tech support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VFW-4-FWC_FW_APP_BAD_VERSION
### Response:
(Severity: 4), (Category: SECURITY), (Description: The Firewall Controller received a message from the Firewall Application with an unexpected version. This could indicate a mismatch in software versions between IOS-XR and the Firewall Application as a result of a software upgrade.), (Recommended Action: Ensure that compatible versions of the IOS-XR and Firewall Application software are installed. The problem may be cleared by rolling back any recent software install operations.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
What is the difference between a reboot package and a restart package in IOS XR?
### Response:
A reboot package requires a router reload for the changes to take effect, while a restart package allows the activation of the package by restarting only the processes that have changed, without requiring a full router reload.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INTF_EA-3-ERROR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Interface EA encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-MISSING_MN_IDENTIFIER_OPTION
### Response:
(Severity: 3), (Category: IP), (Description: The NAI option is missing in the PBU.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How do you configure OSPF area parameters in Cisco IOS XR?
### Response:
To configure OSPF area parameters in Cisco IOS XR, use the 'area <area-id>' command in router configuration mode. Under this, you can specify the area type (stub, totally-stubby, NSSA, etc.), authentication, ranges for summarization, and virtual-links.
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FSDB-2-MSG_TO_FSDB_FAILED_SEND
### Response:
(Severity: 2), (Category: FABRIC), (Description: This is to indicate that the process has failed to send an IPC message to the fabric management process that the plane is defective.), (Recommended Action: 1) Get the output from the following commands: 'sh controller fabric trace all' on the dSC sh diagnostic result location <this node> detail sh diagnostic trace error location all sh diagnostic trace message location all 2) shut down the identified faulty plane in admin configuration: controller fabric plane <> shutdown 3) restart the process that is seeing the issue Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ncs5500-1-RESTART_NOT_SUPPORTED_SUPPL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message associated with RESTART_NOT_SUPPORTED See RESTART_NOT_SUPPORTED for explanation), (Recommended Action: See RESTART_NOT_SUPPORTED for explanation)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFILTER_EA-3-ERR_IM_CAPS
### Response:
(Severity: 3), (Category: L2), (Description: 1) An ACL could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. c) IPv6 address compression table is full. d) UIDB set failed, possible UIDB/PRM down This error can happen when a new bundle member is added and the ACL can not be programmed successfully. 2) An ACL could not be removed from hardware.), (Recommended Action: 1) When this error occurs the running-config will not be in sync with line card configuration. It is recommended that the bundle member on which the error occured be removed from the bundle. The ACL configuration may also be reduced until it can be successfully programmed on the new bundle member. 2) If the ACL could not be removed from hardware a line card reload is recommended.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_1_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PFM-3-CHIP_RESET_NOT_SUPPORTED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detects an invalid Reset action defined in the Application Fault Condition Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
UPGRADE_FPD-6-PASSED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: It indicates that a FPD has been upgraded or downgraded successfully. The current image version and the upgraded image version are displayed.), (Recommended Action: No action is need from user. This is to inform user that FPD downgrade or upgrde is successful. No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_39
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SMC-3-NODE_ID_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: SysDB cannot get the node id for further processing the request. Error code indicates the error received by SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
RSPP_REX-3-IMP_CONNECT
### Response:
(Severity: 3), (Category: SERVICES), (Description: The diversion manager was unable to connect to IM Proxy to register as an interface capsulation. Diversion information may not be correctly applied or inconsistent.), (Recommended Action: The connection will be retried automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MBI_HELLO-6-IMDR_COMPLETED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The MBI hello process is notifying shelfmgr that IMDR has completed.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_AGENT-4-PARSE_ERR
### Response:
(Severity: 4), (Category: INFRA), (Description: Metadata for the identified feature could not be successfully parsed. This is an internal software error, and as a consequence, feature capability information may not be available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-3-CRC_ERR_0_FIA_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CRC error - 0 from FIA on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MBR_BFD_NOT_RUNNING
### Response:
(Severity: 5), (Category: L2), (Description: The BFD session is no longer required if BoB is not required, the Mux state is not at least distributing, and the BFD session perviously was required.), (Recommended Action: Ensure that the bundle and its members are configured correctly on the neighboring router, and that all the interfaces are up. Ensure that BFD is running on the member interfaces on the neighboring router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IPT_EA_LTRACE-3-INIT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that ltrace initialization failed. Both the initialization type and the particular reason are displayed. This error prevents IP Tunnel Execution Agent process from printing ltrace information.), (Recommended Action: Please try restarting IP Tunnel Execution Agent process with the command <CmdBold>process restart ip_tunnel_ea location <node id><NoCmdBold>. If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_TTI_MISMATCH_DEME
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-CRS_X_FABRIC_VOLTAGE_SUPPLY_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: As soon as power is asserted on fabric card, s/w will read power good reister for crs-x fabric cards. If power good register bots are low, it indicates that the crs-x fabric card is not having a good power and the i2c power ON is possibly failed.), (Recommended Action: Please collect required_info log/traces and try to recover by reloading the fabric card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
QAD_SERVER-3-SYSMGR_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Sysmgr proc ready operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPFPGA-6-FIFO_BUFFER_WARNING
### Response:
(Severity: 6), (Category: PLATFORM), (Description: DPFPGA FIFO for the corresponding port is in stuck state), (Recommended Action: Relaod the node to reuse the port)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_DLL_OPEN
### Response:
(Severity: 3), (Category: OS), (Description: The interface library is not availble.), (Recommended Action: Contact support.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_TAG_NAME
### Response:
(Severity: 3), (Category: ROUTING), (Description: An IS-IS process failed to retrieve its process tag name during process initialization. This is a fatal software error and the IS-IS process will abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-RELAY_RECOVERY_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr was unable to recover an relay belonging to the specified application after a reload or switchover event.), (Recommended Action: Inspect the error information and reactivate the application after addressing any issues. The error information can be displayed through the following command: <CmdBold>show appmgr application name <name> info detail<noCmdBold>. This will occur if the underlying rpm install operation fails. Typically this is the result of user errors caused by specifying an invalid RPM file or attempting to install package that already exists.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-MSG_GET_CHAN_CHAN
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to get channel id from a channel handler.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-CNET_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: open_cnet failed. %s- Failed reason. %x- Return value.), (Recommended Action: *SUPPORT*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_BUNDLE_ALL_MEMBER_OFF
### Response:
(Severity: 6), (Category: L2), (Description: The specified BFD session is not running in all member mode.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
SRG-3-MGR_INIT_FAIL
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An error occurred during initialization, causing SRG Manager process to abort and it will be restarted to attempt to resolve the issue.), (Recommended Action: Contact Technical Support. No impact on ongoing feature operations, but if happens repeatedly then Subscriber Redundancy related configuration cannot be updated.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-6-MK_OPERATION_TIMEOUT
### Response:
(Severity: 6), (Category: SECURITY), (Description: It show the Masterkey operation (create/update/delete) was started on system but it is not finished yet. Please run 'show type6 client' to check which type6 clients has not finished the operation.), (Recommended Action: Check the status of all type6 clients with 'show type6 clients'.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_SWITCH_MODE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when switching between standalone and distributed mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-6-LOAD_LICENSE_FILE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The license manager is about to open the named license file to add licenses to the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-5-GO_STANDBY
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Card is becoming standby.), (Recommended Action: No action required, just informational message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_NOT_AUTHORIZED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The authorization code installed does not contain the requested entitlement tag The authorization code installed does not contain enough counts to satisfy the request. Software upgrades will be blocked once the upgrade grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Generate a new authorization with all licenses required from the virtual account and install that on the router.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-MATCH_TYPE_IN_ACL_NOT_SUPPORTED_DIR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The match criteria specified is not supported in an ACL for this type/direction of ACL.), (Recommended Action: Remove the match criteria from the ACL and re-apply.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-MULTI_IP_FPI_RW
### Response:
(Severity: 3), (Category: ROUTING), (Description: Rewrite creation or modification failed due to presence of multiple IP route elements.), (Recommended Action: Collect LSD traces)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_THREAD_COND_WAIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to wait on a condition failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-SOFT_ERROR_ALERT_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 1.), (Recommended Action: Please reload the board in the next maintenance window. Until then affected ports will be down. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
NP-4-COLD_RESET_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an error message in the NP Driver to indicate that it failed to perform cold reset of specified NP instance due to the specified reason.), (Recommended Action: No action is required.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-2-CLIENT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PLDMGR client reports a catastrophic error with error id.), (Recommended Action: All the necessary information is stored in PCDS. We can dump PCDS information using pcds_decode command from the shell.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans')
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
netio_debug-4-ASYNC_HANDLER
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The NetIO debugging partner process couldn't install the default event handler for async messages.), (Recommended Action: NetIO debugging partner process is only needed to capture/log packet info and for debugging purpose only and does not effect system functionality. No actions are needed.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-SYSDB_REGISTER
### Response:
(Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to register with SysDB, so will not be able to function. Installations will be unlikely to produce the expected results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-SYS_UPGRADE_FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: Specified install operation in the error message failed. This message will be sent by the Admin install manager with proper reason for the failure.), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Collect the install operation logs by running 'show tech-support install' on admin as well. Provide the details about any relevant system events/operations before this failure.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-BADOPTION
### Response:
(Severity: 4), (Category: MGBL), (Description: The command option is invalid), (Recommended Action: Re-enter the command. (Use the help command to find valid options.) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
CCTL-6-TEMP_ALARM
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational msg indicating temperature at which alarm occured.), (Recommended Action: Temprature sensor value crossed the threshold mentioned in the message.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-BLOCK_EVENT_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Received specified error from event_block API.), (Recommended Action: Check corehelper process, collect console logs, show context. Report this message to TAC.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
How to monitor MPLS L3VPN VRF BGP session state?
### Response:
To monitor MPLS L3VPN VRF BGP session state, use the 'show bgp vpnv4 unicast vrf MyVRF summary' command. show bgp vpnv4 unicast vrf MyVRF summary
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-3-NOTIFICATION
### Response:
(Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-2-RELOAD_SAVE_CONFIG_FAILED
### Response:
(Severity: 2), (Category: INSTALL), (Description: Configuration will be lost during the reload of the installation if both of the following apply 1. Binary configurations are not compatible between the current software and the software that runs after the reload 2. Some parts of the running configuration have not been committed to configuration manager's hidden ASCII config file.), (Recommended Action: After the installation check that the router's configuration is complete. Reconfigure if necessary.)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_AAA_SESSION
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the AAA iEDGE service. The error message describes what operation has failed and why it failed. The most likely reason for this is that the AAA iEDGE server is unavailable. It may also be caused by low memory resource or a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
"
"<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-LWM_UNEXPECTED_PULSE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: This error message indicates that a pulse has been delivered to the event manager in the IM client library which was intended for someone else. This is almost certainly harmless in this case since IM has detected and ignored the event.), (Recommended Action: No action is required.)
<|EOT|>
"