title: ZS-IL: Looking Back on Learned Experiences For Zero-Shot Incremental Learning

abstract: Classical deep neural networks are limited in their ability to learn from emerging streams of training data. When trained sequentially on new or evolving tasks, their performance degrades sharply, making them inappropriate in real-world use cases. Existing methods tackle it by either storing old data samples or only updating a parameter set of DNNs, which, however, demands a large memory budget or spoils the flexibility of models to learn the incremented class distribution. In this paper, we shed light on an on-call transfer set to provide past experiences whenever a new class arises in the data stream. In particular, we propose a Zero-Shot Incremental Learning not only to replay past experiences the model has learned but also to perform this in a zero-shot manner. Towards this end, we introduced a memory recovery paradigm in which we query the network to synthesize past exemplars whenever a new task (class) emerges. Thus, our method needs no fixed-sized memory, besides calls the proposed memory recovery paradigm to provide past exemplars, named a transfer set in order to mitigate catastrophically forgetting the former classes. Moreover, in contrast with recently proposed methods, the suggested paradigm does not desire a parallel architecture since it only relies on the learner network. Compared to the state-of-the-art data techniques without buffering past data samples, ZS-IL demonstrates significantly better performance on the well-known datasets (CIFAR-10, Tiny-ImageNet) in both Task-IL and Class-IL settings.


title: Protocol to identify a topological superconducting phase in a three-terminal device

abstract: We develop a protocol to determine the presence and extent of a topological phase with Majorana zero modes in a hybrid superconductor-semiconductor device. The protocol is based on conductance measurements in a three-terminal device with two normal leads and one superconducting lead. A radio-frequency technique acts as a proxy for the measurement of local conductance, allowing a rapid, systematic scan of the large experimental phase space of the device. Majorana zero modes cause zero bias conductance peaks at each end of the wire, so we identify promising regions of the phase space by filtering for this condition. To validate the presence of a topological phase, a subsequent measurement of the non-local conductance in these regions is used to detect a topological transition via the closing and reopening of the bulk energy gap. We define data analysis routines that allow for an automated and unbiased execution of the protocol. Our protocol is designed to screen out false positives, especially trivial Andreev bound states that mimic Majorana zero modes in local conductance. We apply the protocol to several examples of simulated data illustrating the detection of topological phases and the screening of false positives.


title: Bug or not bug? That is the question

abstract: Nowadays, development teams often rely on tools such as Jira or Bugzilla to manage backlogs of issues to be solved to develop or maintain software. Although they relate to many different concerns (e.g., bug fixing, new feature development, architecture refactoring), few means are proposed to identify and classify these different kinds of issues, except for non mandatory labels that can be manually associated to them. This may lead to a lack of issue classification or to issue misclassification that may impact automatic issue management (planning, assignment) or issue-derived metrics. Automatic issue classification thus is a relevant topic for assisting backlog management. This paper proposes a binary classification solution for discriminating bug from non bug issues. This solution combines natural language processing (TF-IDF) and classification (multi-layer perceptron) techniques, selected after comparing commonly used solutions to classify issues. Moreover, hyper-parameters of the neural network are optimized using a genetic algorithm. The obtained results, as compared to existing works on a commonly used benchmark, show significant improvements on the F1 measure for all datasets.


title: Continuous-time State & Dynamics Estimation using a Pseudo-Spectral Parameterization

abstract: We present a novel continuous time trajectory representation based on a Chebyshev polynomial basis, which when governed by known dynamics models, allows for full trajectory and robot dynamics estimation, particularly useful for high-performance robotics applications such as unmanned aerial vehicles. We show that we can gracefully incorporate model dynamics to our trajectory representation, within a factor-graph based framework, and leverage ideas from pseudo-spectral optimal control to parameterize the state and the control trajectories as interpolating polynomials. This allows us to perform efficient optimization at specifically chosen points derived from the theory, while recovering full trajectory estimates. Through simulated experiments we demonstrate the applicability of our representation for accurate flight dynamics estimation for multirotor aerial vehicles. The representation framework is general and can thus be applied to a multitude of high-performance applications beyond multirotor platforms.


title: Reynolds stresses in Holmboe instabilities: from linear growth to saturation

abstract: The Reynolds stress in Holmboe instabilities at moderate Reynolds numbers is investigated using single wavelength simulations (SWS), multiple wavelength simulations (MWS), and laboratory experiments. The rightward and leftward propagating instabilities are separated with the two-dimensional discrete Fourier transform, enabling a direct comparison of the perturbation fields between the numerical simulations and linear stability analysis. The decomposition and superposition of the perturbation fields provide a new insight into the origin of Reynolds stresses. Conventionally, only the statistics of horizontal and vertical velocity perturbation pairs, ($u',w'$), are presented to show the degree of anisotropy in turbulent fields. Here, we present these ($u',w'$)-pairs using both theory-based and statistical approaches to reveal the mechanism of the anisotropy of perturbation field. For an individual Holmboe mode, both the simulations and linear theory show that ($u',w'$)-pairs tilt towards the 2nd and 4th quadrants ($u'w'<0$) within upper and lower vorticity interfaces, indicating an anisotropic perturbation field. As a result, a negative correlation between the horizontal and vertical velocity perturbation is produced, $i.e.$ negative Reynolds stresses on average. Combining the leftward and rightward Holmboe modes, ($u',w'$)-pairs are also ellipses whose orientation and aspect ratio are phase dependent. The joint probability density functions of ($u',w'$) in the linear theory and SWS show `steering wheel' structures, while in MWS and laboratory experiments the presence of waves of varying wavelength smears out the `steering wheel' structure leaving an elliptical cloud with similar orientation to the corresponding linear prediction. The vertical structure of the Reynolds stresses in the simulations and the laboratory experiment agree with the linear stability predictions.


title: Mining Scientific Workflows for Anomalous Data Transfers

abstract: Modern scientific workflows are data-driven and are often executed on distributed, heterogeneous, high-performance computing infrastructures. Anomalies and failures in the workflow execution cause loss of scientific productivity and inefficient use of the infrastructure. Hence, detecting, diagnosing, and mitigating these anomalies are immensely important for reliable and performant scientific workflows. Since these workflows rely heavily on high-performance network transfers that require strict QoS constraints, accurately detecting anomalous network performance is crucial to ensure reliable and efficient workflow execution. To address this challenge, we have developed X-FLASH, a network anomaly detection tool for faulty TCP workflow transfers. X-FLASH incorporates novel hyperparameter tuning and data mining approaches for improving the performance of the machine learning algorithms to accurately classify the anomalous TCP packets. X-FLASH leverages XGBoost as an ensemble model and couples XGBoost with a sequential optimizer, FLASH, borrowed from search-based Software Engineering to learn the optimal model parameters. X-FLASH found configurations that outperformed the existing approach up to 28\%, 29\%, and 40\% relatively for F-measure, G-score, and recall in less than 30 evaluations. From (1) large improvement and (2) simple tuning, we recommend future research to have additional tuning study as a new standard, at least in the area of scientific workflow anomaly detection.


title: Explainability: Relevance based Dynamic Deep Learning Algorithm for Fault Detection and Diagnosis in Chemical Processes

abstract: The focus of this work is on Statistical Process Control (SPC) of a manufacturing process based on available measurements. Two important applications of SPC in industrial settings are fault detection and diagnosis (FDD). In this work a deep learning (DL) based methodology is proposed for FDD. We investigate the application of an explainability concept to enhance the FDD accuracy of a deep neural network model trained with a data set of relatively small number of samples. The explainability is quantified by a novel relevance measure of input variables that is calculated from a Layerwise Relevance Propagation (LRP) algorithm. It is shown that the relevances can be used to discard redundant input feature vectors/ variables iteratively thus resulting in reduced over-fitting of noisy data, increasing distinguishability between output classes and superior FDD test accuracy. The efficacy of the proposed method is demonstrated on the benchmark Tennessee Eastman Process.


title: Analysis and control of agreement and disagreement opinion cascades

abstract: We introduce and analyze a continuous time and state-space model of opinion cascades on networks of large numbers of agents that form opinions about two or more options. By leveraging our recent results on the emergence of agreement and disagreement states, we introduce novel tools to analyze and control agreement and disagreement opinion cascades. New notions of agreement and disagreement centrality, which depend only on network structure, are shown to be key to characterizing the nonlinear behavior of agreement and disagreement opinion formation and cascades. Our results are relevant for the analysis and control of opinion cascades in real-world networks, including biological, social and artificial networks, and for the design of opinion-forming behaviors in robotic swarms. We illustrate an application of our model to a multi-robot task-allocation problem and discuss extensions and future directions opened by our modeling framework.


title: How Do Software Developers Use GitHub Actions to Automate Their Workflows?

abstract: Automated tools are frequently used in social coding repositories to perform repetitive activities that are part of the distributed software development process. Recently, GitHub introduced GitHub Actions, a feature providing automated workflows for repository maintainers. Although several Actions have been built and used by practitioners, relatively little has been done to evaluate them. Understanding and anticipating the effects of adopting such kind of technology is important for planning and management. Our research is the first to investigate how developers use Actions and how several activity indicators change after their adoption. Our results indicate that, although only a small subset of repositories adopted GitHub Actions to date, there is a positive perception of the technology. Our findings also indicate that the adoption of GitHub Actions increases the number of monthly rejected pull requests and decreases the monthly number of commits on merged pull requests. These results are especially relevant for practitioners to understand and prevent undesirable effects on their projects.


title: Achromatic arboricity on complete graphs

abstract: In this paper we study the {\it {achromatic arboricity}} of the complete graph. This parameter arises from the arboricity of a graph as the achromatic index arises from the chromatic index. The achromatic arboricity of a graph $G$, denoted by $A_{\alpha}(G)$, is the maximum number of colors that can be used to color the edges of $G$ such that every color class induces a forest but any two color classes contain a cycle. In particular, if $G$ is a complete graph we prove that \[\frac{1}{4}n^{\frac{3}{2}}-\Theta(n) \leq A_{\alpha}(G)\leq \frac{1}{\sqrt{2}}n^{\frac{3}{2}}-\Theta(n).\]


title: Modern Machine Learning and Particle Physics

abstract: Over the past five years, modern machine learning has been quietly revolutionizing particle physics. Old methodology is being outdated and entirely new ways of thinking about data are becoming commonplace. This article will review some aspects of the natural synergy between modern machine learning and particle physics, focusing on applications at the Large Hadron Collider. A sampling of examples is given, from signal/background discrimination tasks using supervised learning to direct data-driven approaches. Some comments on persistent challenges and possible future directions for the field are included at the end.


title: Challenges in systematic reviews and meta-analyses of mediation analyses

abstract: Systematic reviews and meta-analyses of mediation studies are increasingly being implemented in practice. Nonetheless, the methodology for conducting such review and analysis is still in a development phase, with much room for improvement. In this paper, we highlight and discuss challenges that investigators face in mediation systematic reviews and meta-analyses, then propose ways of accommodating these in practice.


title: Channel Scaling: A Scale-and-Select Approach for Transfer Learning

abstract: Transfer learning with pre-trained neural networks is a common strategy for training classifiers in medical image analysis. Without proper channel selections, this often results in unnecessarily large models that hinder deployment and explainability. In this paper, we propose a novel approach to efficiently build small and well performing networks by introducing the channel-scaling layers. A channel-scaling layer is attached to each frozen convolutional layer, with the trainable scaling weights inferring the importance of the corresponding feature channels. Unlike the fine-tuning approaches, we maintain the weights of the original channels and large datasets are not required. By imposing L1 regularization and thresholding on the scaling weights, this framework iteratively removes unnecessary feature channels from a pre-trained model. Using an ImageNet pre-trained VGG16 model, we demonstrate the capabilities of the proposed framework on classifying opacity from chest X-ray images. The results show that we can reduce the number of parameters by 95% while delivering a superior performance.


title: HaPPY-Mine: Designing a Mining Reward Function

abstract: In cryptocurrencies, the block reward is meant to serve as the incentive mechanism for miners to commit resources to create blocks and in effect secure the system. Existing systems primarily divide the reward in proportion to expended resources and follow one of two static models for total block reward: (i) a fixed reward for each block (e.g., Ethereum), or (ii) one where the block reward halves every set number of blocks (e.g., the Bitcoin model of halving roughly every 4 years) but otherwise remains fixed between halvings. In recent work, a game-theoretic analysis of the static model under asymmetric miner costs showed that an equilibrium always exists and is unique. Their analysis also reveals how asymmetric costs can lead to large-scale centralization in blockchain mining, a phenomenon that has been observed in Bitcoin and Ethereum and highlighted by other studies. In this work we introduce a novel family of mining reward functions, HaPPY-Mine (HAsh-Pegged Proportional Yield), which peg the value of the reward to the hashrate of the system, decreasing the reward as the hashrate increases. HaPPY-Mine distributes rewards in proportion to expended hashrate and inherits the safety properties of the generalized proportional reward function. We study HaPPY-Mine under a heterogeneous miner cost model and show that an equilibrium always exists with a unique set of miner participants and a unique total hashrate. Significantly, we prove that a HaPPY-Mine equilibrium is more decentralized than the static model equilibrium under a set of metrics including number of mining participants and hashrate distribution. Finally, we show that any HaPPY-Mine equilibrium is also safe against collusion and sybil attacks, and explore how the market value of the currency affects the equilibrium.


title: Formation and construction of a multidimensional shock wave for the first order hyperbolic conservation law with smooth initial data

abstract: In this paper, the problem on formation and construction of a multidimensional shock wave is studied for the first order conservation law $\partial_t u+\partial_x F(u)+\partial_y G(u)=0$ with smooth initial data $u_0(x,y)$. It is well-known that the smooth solution $u$ will blow up on the time $T^*=-\frac{1}{\min{H(\xi,\eta)}}$ when $\min{H(\xi,\eta})<0$ holds for $H(\xi,\eta)=\partial_{\xi}(F'(u_0(\xi,\eta)))+\partial_{\eta}(G'(u_0(\xi,\eta)))$, more precisely, only the first order derivatives $\nabla_{t,x,y}u$ blow up on $t=T^*$ meanwhile $u$ itself is still continuous until $t=T^*$. Under the generic nondegenerate condition of $H(\xi,\eta)$, we construct a local weak entropy solution $u$ for $t\ge T^*$ which is not uniformly Lipschitz continuous on two sides of a shock surface $\Sigma$. The strength of the constructed shock is zero on the initial blowup curve $\Gamma$ and then gradually increases for $t>T^*$. Additionally, in the neighbourhood of $\Gamma$, some detailed and precise descriptions on the singularities of solution $u$ are given.


title: On the Role of System Software in Energy Management of Neuromorphic Computing

abstract: Neuromorphic computing systems such as DYNAPs and Loihi have recently been introduced to the computing community to improve performance and energy efficiency of machine learning programs, especially those that are implemented using Spiking Neural Network (SNN). The role of a system software for neuromorphic systems is to cluster a large machine learning model (e.g., with many neurons and synapses) and map these clusters to the computing resources of the hardware. In this work, we formulate the energy consumption of a neuromorphic hardware, considering the power consumed by neurons and synapses, and the energy consumed in communicating spikes on the interconnect. Based on such formulation, we first evaluate the role of a system software in managing the energy consumption of neuromorphic systems. Next, we formulate a simple heuristic-based mapping approach to place the neurons and synapses onto the computing resources to reduce energy consumption. We evaluate our approach with 10 machine learning applications and demonstrate that the proposed mapping approach leads to a significant reduction of energy consumption of neuromorphic computing systems.


title: Mirror Symmetry for Truncated Cluster Varieties

abstract: In the algebraic setting, cluster varieties were reformulated by Gross-Hacking-Keel as log Calabi-Yau varieties admitting a toric model. Building on work of Shende-Treumann-Williams-Zaslow in dimension 2, we describe the mirror to the GHK construction in arbitrary dimension: given a truncated cluster variety, we construct a symplectic manifold and prove homological mirror symmetry for the resulting pair. We also describe how our construction can be obtained from toric geometry, and we relate our construction to various aspects of cluster theory which are known to symplectic geometers.


title: Efficient sign language recognition system and dataset creation method based on deep learning and image processing

abstract: New deep-learning architectures are created every year, achieving state-of-the-art results in image recognition and leading to the belief that, in a few years, complex tasks such as sign language translation will be considerably easier, serving as a communication tool for the hearing-impaired community. On the other hand, these algorithms still need a lot of data to be trained and the dataset creation process is expensive, time-consuming, and slow. Thereby, this work aims to investigate techniques of digital image processing and machine learning that can be used to create a sign language dataset effectively. We argue about data acquisition, such as the frames per second rate to capture or subsample the videos, the background type, preprocessing, and data augmentation, using convolutional neural networks and object detection to create an image classifier and comparing the results based on statistical tests. Different datasets were created to test the hypotheses, containing 14 words used daily and recorded by different smartphones in the RGB color system. We achieved an accuracy of 96.38% on the test set and 81.36% on the validation set containing more challenging conditions, showing that 30 FPS is the best frame rate subsample to train the classifier, geometric transformations work better than intensity transformations, and artificial background creation is not effective to model generalization. These trade-offs should be considered in future work as a cost-benefit guideline between computational cost and accuracy gain when creating a dataset and training a sign recognition model.


title: Finsler geometry modeling and Monte Carlo study of skyrmion shape deformation by uniaxial stress

abstract: Skyrmions in chiral magnetic materials are topologically stable and energetically balanced spin configurations appearing under the presence of ferromagnetic interaction (FMI) and Dzyaloshinskii-Moriya interaction (DMI). Much of the current interest has focused on the effects of magneto-elastic coupling on these interactions under mechanical stimuli, such as uniaxial stresses for future applications in spintronics devices. Recent studies suggest that skyrmion shape deformations in thin films are attributed to an anisotropy in the coefficient of DMI, such that $D_{x}\!\not=\!D_{y}$, which makes the ratio $\lambda/D$ anistropic, where the coefficient of FMI $\lambda$ is isotropic. It is also possible that $\lambda_{x}\!\not=\!\lambda_{y}$ while $D$ is isotropic for $\lambda/D$ to be anisotropic. In this paper, we study this problem using a new modeling technique constructed based on Finsler geometry (FG). Two possible FG models are examined: In the first (second) model, the FG modeling prescription is applied to the FMI (DMI) Hamiltonian. We find that these two different FG models' results are consistent with the reported experimental data for skyrmion deformation. We also study responses of helical spin orders under lattice deformations corresponding to uniaxial extension/compression and find a clear difference between these two models in the stripe phase, elucidating which interaction of FMI and DMI is deformed to be anisotropic by uniaxial stresses.


title: Mitigating False-Negative Contexts in Multi-document Question Answering with Retrieval Marginalization

abstract: Question Answering (QA) tasks requiring information from multiple documents often rely on a retrieval model to identify relevant information for reasoning. The retrieval model is typically trained to maximize the likelihood of the labeled supporting evidence. However, when retrieving from large text corpora such as Wikipedia, the correct answer can often be obtained from multiple evidence candidates. Moreover, not all such candidates are labeled as positive during annotation, rendering the training signal weak and noisy. This problem is exacerbated when the questions are unanswerable or when the answers are Boolean, since the model cannot rely on lexical overlap to make a connection between the answer and supporting evidence. We develop a new parameterization of set-valued retrieval that handles unanswerable queries, and we show that marginalizing over this set during training allows a model to mitigate false negatives in supporting evidence annotations. We test our method on two multi-document QA datasets, IIRC and HotpotQA. On IIRC, we show that joint modeling with marginalization improves model performance by 5.5 F1 points and achieves a new state-of-the-art performance of 50.5 F1. We also show that retrieval marginalization results in 4.1 QA F1 improvement over a non-marginalized baseline on HotpotQA in the fullwiki setting.


title: Instance-level Image Retrieval using Reranking Transformers

abstract: Instance-level image retrieval is the task of searching in a large database for images that match an object in a query image. To address this task, systems usually rely on a retrieval step that uses global image descriptors, and a subsequent step that performs domain-specific refinements or reranking by leveraging operations such as geometric verification based on local features. In this work, we propose Reranking Transformers (RRTs) as a general model to incorporate both local and global features to rerank the matching images in a supervised fashion and thus replace the relatively expensive process of geometric verification. RRTs are lightweight and can be easily parallelized so that reranking a set of top matching results can be performed in a single forward-pass. We perform extensive experiments on the Revisited Oxford and Paris datasets, and the Google Landmarks v2 dataset, showing that RRTs outperform previous reranking approaches while using much fewer local descriptors. Moreover, we demonstrate that, unlike existing approaches, RRTs can be optimized jointly with the feature extractor, which can lead to feature representations tailored to downstream tasks and further accuracy improvements. The code and trained models are publicly available at https://github.com/uvavision/RerankingTransformer.


title: Finite-time blowup for smooth solutions of the Navier--Stokes equations on the whole space with linear growth at infinity

abstract: In this paper we consider smooth solutions of the Navier--Stokes equations with a linear dependence on the spatial variable. We reduce the evolution of these solutions to a matrix ODE, and show that there are such solutions that blowup in finite-time. Note that because these solutions have linear growth at infinity, this blowup is not a counterexample disproving the global regularity of strong solutions of the Navier--Stokes equations, as strong solutions must have sufficient decay at infinity. This paper does not resolve the Millennium Problem. Nonetheless, these solutions do exhibit several properties that are closely related to the problem of blowup for strong solutions of Navier--Stokes equations, including the presence of unbounded planar stretching, and the alignment of the vorticity with the middle eigenvector of the strain matrix.


title: Controllability of a simplified time-discrete stabilized Kuramoto-Sivashinsky system

abstract: In this paper, we study some controllability and observability properties for a coupled system of time-discrete fourth- and second-order parabolic equations. This system can be regarded as a simplification of the well-known stabilized Kumamoto-Sivashinsky equation. Unlike the continuous case, we can prove only a relaxed observability inequality which yields a $\phi(\triangle t)$-controllability result. This result tells that we cannot reach exactly zero but rather a small target whose size goes to 0 as the discretization parameter $\triangle t$ goes to 0. The proof relies on a known Carleman estimate for second-order time-discrete parabolic operators and a new Carleman estimate for the time-discrete fourth-order equation.


title: Biologically Inspired Collision Avoidance Without Distance Information

abstract: Biological evidence shows that animals are capable of evading eminent collision without using depth information, relying solely on looming stimuli. In robotics, collision avoidance among uncooperative vehicles requires measurement of relative distance to the obstacle. Small, low-cost mobile robots and UAVs might be unable to carry distance measuring sensors, like LIDARS and depth cameras. We propose a control framework suitable for a unicycle-like vehicle moving in a 2D plane that achieves collision avoidance. The control strategy is inspired by the reaction of invertebrates to approaching obstacles, relying exclusively on line-of-sight (LOS) angle, LOS angle rate, and time-to-collision as feedback. Those quantities can readily be estimated from a monocular camera vision system onboard a mobile robot. The proposed avoidance law commands the heading angle to circumvent a moving obstacle with unknown position, while the velocity controller is left as a degree of freedom to accomplish other mission objectives. Theoretical guarantees are provided to show that minimum separation between the vehicle and the obstacle is attained regardless of the exogenous tracking controller.


title: Macroscopic Magneto-Chiroptical Metasurfaces

abstract: Nanophotonic chiral antennas exhibit orders of magnitude higher circular dichroism (CD) compared to molecular systems. Merging magnetism and structural chirality at the nanometric level allows for the efficient magnetic control of the dichroic response, bringing exciting new prospects to active nanophotonic devices and magnetochirality. Here we devise macroscale enantiomeric magnetophotonic metasurfaces of plasmon and ferromagnetic spiral antennas. Mixed 2D- and 3D- chiral nanoantennas induce large CD response, where we identify reciprocal and non-reciprocal contributions. The simultaneous chiroptical and magneto-optical response in a wide spectral range with these metasurfaces delivers an attractive platform for the study of magnetochirality at the nanoscale. Exploring further this type of magnetophotonic metasurfaces allows the realization of high-sensitivity chiral sensors and prompts the design of novel macroscopic optical devices operating with polarized light.


title: Multimodal Data Fusion for Power-On-and-Go Robotic Systems in Retail

abstract: Robotic systems for retail have gained a lot of attention due to the labor-intensive nature of such business environments. Many tasks have the potential to be automated via intelligent robotic systems that have manipulation capabilities. For example, empty shelves can be replenished, stray products can be picked up or new items can be delivered. However, many challenges make the realization of this vision a challenge. In particular, robots are still too expensive and do not work out of the box. In this paper, we discuss a work-in-progress approach for enabling power-on-and-go robots in retail environments through a combination of active, physical sensors and passive, artificial sensors. In particular, we use low-cost hardware sensors in conjunction with machine learning techniques in order to generate high-quality environmental information. More specifically, we present a setup in which a standard monocular camera and Bluetooth low-energy yield a reliable robot system that can immediately be used after placing a couple of sensors in the environment. The camera information is used to synthesize accurate 3D point clouds, whereas the BLE data is used to integrate the data into a complex map of the environment. The combination of active and passive sensing enables high-quality sensing capabilities at a fraction of the costs traditionally associated with such tasks.


title: F-SIOL-310: A Robotic Dataset and Benchmark for Few-Shot Incremental Object Learning

abstract: Deep learning has achieved remarkable success in object recognition tasks through the availability of large scale datasets like ImageNet. However, deep learning systems suffer from catastrophic forgetting when learning incrementally without replaying old data. For real-world applications, robots also need to incrementally learn new objects. Further, since robots have limited human assistance available, they must learn from only a few examples. However, very few object recognition datasets and benchmarks exist to test incremental learning capability for robotic vision. Further, there is no dataset or benchmark specifically designed for incremental object learning from a few examples. To fill this gap, we present a new dataset termed F-SIOL-310 (Few-Shot Incremental Object Learning) which is specifically captured for testing few-shot incremental object learning capability for robotic vision. We also provide benchmarks and evaluations of 8 incremental learning algorithms on F-SIOL-310 for future comparisons. Our results demonstrate that the few-shot incremental object learning problem for robotic vision is far from being solved.


title: Adaptive Importance Sampling for Finite-Sum Optimization and Sampling with Decreasing Step-Sizes

abstract: Reducing the variance of the gradient estimator is known to improve the convergence rate of stochastic gradient-based optimization and sampling algorithms. One way of achieving variance reduction is to design importance sampling strategies. Recently, the problem of designing such schemes was formulated as an online learning problem with bandit feedback, and algorithms with sub-linear static regret were designed. In this work, we build on this framework and propose Avare, a simple and efficient algorithm for adaptive importance sampling for finite-sum optimization and sampling with decreasing step-sizes. Under standard technical conditions, we show that Avare achieves $\mathcal{O}(T^{2/3})$ and $\mathcal{O}(T^{5/6})$ dynamic regret for SGD and SGLD respectively when run with $\mathcal{O}(1/t)$ step sizes. We achieve this dynamic regret bound by leveraging our knowledge of the dynamics defined by the algorithm, and combining ideas from online learning and variance-reduced stochastic optimization. We validate empirically the performance of our algorithm and identify settings in which it leads to significant improvements.


title: Magneto-optical methods for magnetoplasmonics in noble metal nanostructures

abstract: The use of magneto-optical techniques to tune the plasmonic response of nanostructures is a hot topic in active plasmonics, with fascinating implications for several plasmon-based applications and devices. For this emerging field, called magnetoplasmonics, plasmonic nanomaterials with strong optical response to magnetic field are desired, which is generally challenging to achieve with pure noble metals. To overcome this issue, several efforts have been carried out to design and tailor the magneto-optical response of metal nanostructures, mainly by combining plasmonic and magnetic materials in a single nanostructure. In this tutorial we focus our attention on magnetoplasmonic effects in purely plasmonic nanostructures, as they are a valuable model system allowing for an easier rationalization of magnetoplasmonic effects. The most common magneto-optical experimental methods employed to measure these effects are introduced, followed by a review of the major experimental observations that are discussed within the framework of an analytical model developed for the rationalization of magnetoplasmonic effects. Different materials are discussed, from noble metals to novel plasmonic materials, such as heavily doped semiconductors.


title: Multiview and Multiclass Image Segmentation using Deep Learning in Fetal Echocardiography

abstract: Congenital heart disease (CHD) is the most common congenital abnormality associated with birth defects in the United States. Despite training efforts and substantial advancement in ultrasound technology over the past years, CHD remains an abnormality that is frequently missed during prenatal ultrasonography. Therefore, computer-aided detection of CHD can play a critical role in prenatal care by improving screening and diagnosis. Since many CHDs involve structural abnormalities, automatic segmentation of anatomical structures is an important step in the analysis of fetal echocardiograms. While existing methods mainly focus on the four-chamber view with a small number of structures, here we present a more comprehensive deep learning segmentation framework covering 14 anatomical structures in both three-vessel trachea and four-chamber views. Specifically, our framework enhances the V-Net with spatial dropout, group normalization, and deep supervision to train a segmentation model that can be applied on both views regardless of abnormalities. By identifying the pitfall of using the Dice loss when some labels are unavailable in some images, this framework integrates information from multiple views and is robust to missing structures due to anatomical anomalies, achieving an average Dice score of 79%.


title: Stochastic Hybrid Approximation for Uncertainty Management in Gas-Electric Systems

abstract: Gas-fired generators, with their ability to quickly ramp up and down their electricity production, play an important role in managing renewable energy variability. However, these changes in electricity production translate into variability in the consumption of natural gas, and propagate uncertainty from the electric grid to the natural gas system. To ensure that both systems are operating safely, there is an increasing need for coordination and uncertainty management among the electricity and gas networks. A challenging aspect of this coordination is the consideration of natural gas dynamics, which play an important role at the time scale of interest, but give rise to a set of non-linear and non-convex equations that are hard to optimize over even in the deterministic case. Many conventional methods for stochastic optimization cannot be used because they either incorporate a large number of scenarios directly or require the underlying problem to be convex. To address these challenges, we propose using a Stochastic Hybrid Approximation algorithm to more efficiently solve these problems and investigate several different variants of this algorithm. In a case study, we demonstrate that the proposed technique is able to quickly obtain high quality solutions and outperforms existing benchmarks such as Generalized Benders Decomposition. We demonstrate that coordinated uncertainty management that accounts for the gas system can significantly reduce both electric and gas system load shed in stressed conditions.


title: Gradient-enhanced multifidelity neural networks for high-dimensional function approximation

abstract: In this work, a novel multifidelity machine learning (ML) model, the gradient-enhanced multifidelity neural networks (GEMFNNs), is proposed. This model is a multifidelity version of gradient-enhanced neural networks (GENNs) as it uses both function and gradient information available at multiple levels of fidelity to make function approximations. Its construction is similar to multifidelity neural networks (MFNNs). This model is tested on three analytical function, a one, two, and a 20 variable function. It is also compared to neural networks (NNs), GENNs, and MFNNs, and the number of samples required to reach a global accuracy of 0.99 coefficient of determination (R^2) is measured. GEMFNNs required 18, 120, and 600 high-fidelity samples for the one, two, and 20 dimensional cases, respectively, to meet the target accuracy. NNs performed best on the one variable case, requiring only ten samples, while GENNs worked best on the two variable case, requiring 120 samples. GEMFNNs worked best for the 20 variable case, while requiring nearly eight times fewer samples than its nearest competitor, GENNs. For this case, NNs and MFNNs did not reach the target global accuracy even after using 10,000 high-fidelity samples. This work demonstrates the benefits of using gradient as well as multifidelity information in NNs for high-dimensional problems.


title: Multi-Modal Answer Validation for Knowledge-Based VQA

abstract: The problem of knowledge-based visual question answering involves answering questions that require external knowledge in addition to the content of the image. Such knowledge typically comes in various forms, including visual, textual, and commonsense knowledge. Using more knowledge sources increases the chance of retrieving more irrelevant or noisy facts, making it challenging to comprehend the facts and find the answer. To address this challenge, we propose Multi-modal Answer Validation using External knowledge (MAVEx), where the idea is to validate a set of promising answer candidates based on answer-specific knowledge retrieval. Instead of searching for the answer in a vast collection of often irrelevant facts as most existing approaches do, MAVEx aims to learn how to extract relevant knowledge from noisy sources, which knowledge source to trust for each answer candidate, and how to validate the candidate using that source. Our multi-modal setting is the first to leverage external visual knowledge (images searched using Google), in addition to textual knowledge in the form of Wikipedia sentences and ConceptNet concepts. Our experiments with OK-VQA, a challenging knowledge-based VQA dataset, demonstrate that MAVEx achieves new state-of-the-art results. Our code is available at https://github.com/jialinwu17/MAVEX


title: Magnetic field-driven transition between valence bond solid and antiferromagnetic order in distorted triangular lattice

abstract: A molecular Mott insulator $\kappa$-(ET)$_2$B(CN)$_4$ [ET = bis(ethylenedithio)tetrathiafulvalene] with a distorted triangular lattice exhibits a quantum disordered state with gapped spin excitation in the ground state. $^{13}$C nuclear magnetic resonance, magnetization, and magnetic torque measurements reveal that magnetic field suppresses valence bond order and induces long-range magnetic order above a critical field $\sim 8$ T. The nuclear spin-lattice relaxation rate $1/T_1$ shows persistent evolution of antiferromagnetic correlation above the transition temperature, highlighting a quantum spin liquid state with fractional excitations. The field-induced transition as observed in the spin-Peierls phase suggests that the valence bond order transition is driven through renormalized one-dimensionality and spin-lattice coupling.


title: Cleaning Images with Gaussian Process Regression

abstract: Many approaches to astronomical data reduction and analysis cannot tolerate missing data: corrupted pixels must first have their values imputed. This paper presents astrofix, a robust and flexible image imputation algorithm based on Gaussian Process Regression (GPR). Through an optimization process, astrofix chooses and applies a different interpolation kernel to each image, using a training set extracted automatically from that image. It naturally handles clusters of bad pixels and image edges and adapts to various instruments and image types. For bright pixels, the mean absolute error of astrofix is several times smaller than that of median replacement and interpolation by a Gaussian kernel. We demonstrate good performance on both imaging and spectroscopic data, including the SBIG 6303 0.4m telescope and the FLOYDS spectrograph of Las Cumbres Observatory and the CHARIS integral-field spectrograph on the Subaru Telescope.


title: A $p$-adic Approach To Piecewise Polynomial Dynamical Systems

abstract: Using $p$-adic numbers, we partially categorize the cycles of a sizable class of polynomial dynamical systems. In turn, we prove a few results related to the non-trivial cycles of the $\textit{Collatz map}$ $\text{Col} : \mathbb{Z}_+ \to \mathbb{Z}_+$ defined by $$\text{Col}(n) = \begin{cases} 3n + 1, & n \text{ is odd;} \\ n/2, & \text{otherwise.}\end{cases}$$ Proving the non-existence of non-trivial Collatz cycles would reduce the Collatz conjecture to whether the Collatz map can diverge to infinity.


title: Multi-party quantum key agreement protocol with authentication

abstract: Utilizing the advantage of quantum entanglement swapping, a multi-party quantum key agreement protocol with authentication is proposed. In this protocol, a semi-trusted third party is introduced, who prepares Bell states, and sends one particle to multiple participants respectively. After that the participants can share a Greenberger-Horne-Zeilinger state by entanglement swapping. Finally, these participants measure the particles in their hands and obtain an agreement key. Here, classical hash function and Hadamard operation are utilized to authenticate the identity of participants. The correlations of GHZ states ensure the security of the proposed protocol. To illustrated it detailly, the security of this protocol against common attacks is analyzed, which shows that the proposed protocol is secure in theory.


title: Stationary measure for the open KPZ equation

abstract: We provide the first construction of stationary measures for the open KPZ equation on the spatial interval $[0,1]$ with general inhomogeneous Neumann boundary conditions at $0$ and $1$ depending on real parameters $u$ and $v$, respectively. When $u+v\geq 0$ we uniquely characterize the constructed stationary measures through their multipoint Laplace transform which we prove is given in terms of a stochastic process that we call the continuous dual Hahn process.

categories: math.PR cond-mat.stat-mech math-ph math.MP


title: 1D self-healing beams in integrated silicon photonics

abstract: Since the first experimental observation of optical Airy beams, various applications ranging from particle and cell micromanipulation to laser micromachining have exploited their non-diffracting and accelerating properties. The later discovery that Airy beams can self-heal after being blocked by an obstacle further proved their robustness to propagate under scattering and disordered environment. Here, we report the generation of Airy beams on an integrated silicon photonic chip and demonstrate that the on-chip 1D Airy beams preserve the same properties as the 2D beams. The 1D meta-optics used to create the Airy beam has the size of only 3 by 16 microns, at least three orders of magnitude smaller than the conventional optic. The on-chip self-healing beams demonstrated here could potentially enable diffraction-free light routing for on-chip optical networks and high-precision micromanipulation of bio-molecules on an integrated photonic chip.


title: On the number of $k$-gons in finite projective planes

abstract: Let $\Pi$ be a projective plane of order $n$ and $\Gamma_{\Pi}$ be its Levi graph (the point-line incidence graph). For fixed $k \geq 3$, let $c_{2k}(\Gamma_{\Pi})$ denote the number of $2k$-cycles in $\Gamma_{\Pi}$. In this paper we show that $$ c_{2k}(\Gamma_{\Pi}) = \frac{1}{2k}n^{2k} + O(n^{2k-2}), \hspace{0.5cm} n \rightarrow \infty. $$ We also state a conjecture regarding the third and fourth largest terms in the asymptotic of the number of $2k$-cycles in $\Gamma_{\Pi}$. This result was also obtained independently by Voropaev in 2012. Let $\text{ex}(v, C_{2k}, \mathcal{C}_{\text{odd}}\cup \{C_4\})$ denote the greatest number of $2k$-cycles amongst all bipartite graphs of order $v$ and girth at least 6. As a corollary of the result above, we obtain $$ \text{ex}(v, C_{2k}, \mathcal{C}_{\text{odd}}\cup \{C_4\}) = \left(\frac{1}{2^{k+1}k}-o(1)\right)v^k, \hspace{0.5cm} v \rightarrow \infty. $$


title: Spatio-Temporal Sparsification for General Robust Graph Convolution Networks

abstract: Graph Neural Networks (GNNs) have attracted increasing attention due to its successful applications on various graph-structure data. However, recent studies have shown that adversarial attacks are threatening the functionality of GNNs. Although numerous works have been proposed to defend adversarial attacks from various perspectives, most of them can be robust against the attacks only on specific scenarios. To address this shortage of robust generalization, we propose to defend the adversarial attacks on GNN through applying the Spatio-Temporal sparsification (called ST-Sparse) on the GNN hidden node representation. ST-Sparse is similar to the Dropout regularization in spirit. Through intensive experiment evaluation with GCN as the target GNN model, we identify the benefits of ST-Sparse as follows: (1) ST-Sparse shows the defense performance improvement in most cases, as it can effectively increase the robust accuracy by up to 6\% improvement; (2) ST-Sparse illustrates its robust generalization capability by integrating with the existing defense methods, similar to the integration of Dropout into various deep learning models as a standard regularization technique; (3) ST-Sparse also shows its ordinary generalization capability on clean datasets, in that ST-SparseGCN (the integration of ST-Sparse and the original GCN) even outperform the original GCN, while the other three representative defense methods are inferior to the original GCN.


title: Quantum Support Vector Machines for Continuum Suppression in B Meson Decays

abstract: Quantum computers have the potential to speed up certain computational tasks. A possibility this opens up within the field of machine learning is the use of quantum techniques that may be inefficient to simulate classically but could provide superior performance in some tasks. Machine learning algorithms are ubiquitous in particle physics and as advances are made in quantum machine learning technology there may be a similar adoption of these quantum techniques. In this work a quantum support vector machine (QSVM) is implemented for signal-background classification. We investigate the effect of different quantum encoding circuits, the process that transforms classical data into a quantum state, on the final classification performance. We show an encoding approach that achieves an average Area Under Receiver Operating Characteristic Curve (AUC) of 0.848 determined using quantum circuit simulations. For this same dataset the best classical method tested, a classical Support Vector Machine (SVM) using the Radial Basis Function (RBF) Kernel achieved an AUC of 0.793. Using a reduced version of the dataset we then ran the algorithm on the IBM Quantum ibmq_casablanca device achieving an average AUC of 0.703. As further improvements to the error rates and availability of quantum computers materialise, they could form a new approach for data analysis in high energy physics.


title: Hallucination of speech recognition errors with sequence to sequence learning

abstract: Automatic Speech Recognition (ASR) is an imperfect process that results in certain mismatches in ASR output text when compared to plain written text or transcriptions. When plain text data is to be used to train systems for spoken language understanding or ASR, a proven strategy to reduce said mismatch and prevent degradations, is to hallucinate what the ASR outputs would be given a gold transcription. Prior work in this domain has focused on modeling errors at the phonetic level, while using a lexicon to convert the phones to words, usually accompanied by an FST Language model. We present novel end-to-end models to directly predict hallucinated ASR word sequence outputs, conditioning on an input word sequence as well as a corresponding phoneme sequence. This improves prior published results for recall of errors from an in-domain ASR system's transcription of unseen data, as well as an out-of-domain ASR system's transcriptions of audio from an unrelated task, while additionally exploring an in-between scenario when limited characterization data from the test ASR system is obtainable. To verify the extrinsic validity of the method, we also use our hallucinated ASR errors to augment training for a spoken question classifier, finding that they enable robustness to real ASR errors in a downstream task, when scarce or even zero task-specific audio was available at train-time.


title: A stabilized computational nonlocal poromechanics model for dynamic analysis of saturated porous media

abstract: In this article we formulate a stable computational nonlocal poromechanics model for dynamic analysis of saturated porous media. As a novelty, the stabilization formulation eliminates zero-energy modes associated with the original multiphase correspondence constitutive models in the coupled nonlocal poromechanics model. The two-phase stabilization scheme is formulated based on an energy method that incorporates inhomogeneous solid deformation and fluid flow. In this method, the nonlocal formulations of skeleton strain energy and fluid flow dissipation energy equate to their local formulations. The stable coupled nonlocal poromechanics model is solved for dynamic analysis by an implicit time integration scheme. As a new contribution, we validate the coupled stabilization formulation by comparing numerical results with analytical and finite element solutions for one-dimensional and two-dimensional dynamic problems in saturated porous media. Numerical examples of dynamic strain localization in saturated porous media are presented to demonstrate the efficacy of the stable coupled poromechanics framework for localized failure under dynamic loads.


title: Hamiltonian effective field theory in elongated or moving finite volume

abstract: We extend previous work concerning rest-frame partial-wave mixing in Hamiltonian effective field theory to both elongated and moving systems, where two particles are in a periodic elongated cube or have nonzero total momentum, respectively. We also consider the combination of the two systems when directions of the elongation and the moving momentum are aligned. This extension should also be applicable in any Hamiltonian formalism. As a demonstration, we analyze lattice QCD results for the spectrum of an isospin-2 $\pi\pi$ scattering system and determine the $s$, $d$, and $g$ partial-wave scattering information. The inclusion of lattice simulation results from moving frames significantly improves the uncertainty in the scattering information.


title: Improvement of local critical current density of REBa2Cu3O7-d by the increase in configurational entropy of mixing at the RE site

abstract: REBa2Cu3O7-d (RE123, RE: rare earth) is one of the high-temperature superconductors with a transition temperature (Tc) exceeding 90 K. Because of its high Tc and large critical current density (Jc) under magnetic fields, RE123 superconductors have been expected to play a key role in superconductivity application. To accelerate application researches on RE123-based devices, further improvements of Jc characteristics have been desired. In this study, we investigated the effects of high-entropy alloying at the RE site on the superconducting properties, through the measurements of local (intra-grain) Jc (Jclocal) by a remanent magnetization method. We found that Jclocal shows a trend to be improved when four or five RE elements are solved at the RE site, which results in high configurational entropy of mixing (delta_Smix). Because high-entropy alloying can improve Jclocal of RE123 superconductors by modification of the RE site composition and delta_Smix, and the technique would be applicable together with other techniques, such as introduction of nanoscale disorders, our entropy-engineering strategy introduced here would be useful for development of RE123 superconducting materials available under high magnetic fields.


title: Doping Concentration Modulation in Vanadium Doped Monolayer Molybdenum Disulfide for Synaptic Transistors

abstract: Doping is an effective way to modify the electronic property of two-dimensional (2D) materials and endow them with new functionalities. However, wide-range control of the substitutional doping concentration with large scale uniformity remains challenging in 2D materials. Here we report in-situ chemical vapor deposition growth of vanadium (V) doped monolayer molybdenum disulfide (MoS2) with widely tunable doping concentrations ranging from 0.3 to 13.1 at%. The key to regulate the doping concentration lies in the use of appropriate V precursors with different doping abilities, which also generate a large-scale uniform doping effect. Artificial synaptic transistors were fabricated by using the heavily doped MoS2 as the channel material for the first time. Synaptic potentiation, depression and repetitive learning processes are mimicked by the gate-tunable channel conductance change in such transistors with abundant V atoms to trap/detrap electrons. This work shows a feasible method to dope monolayer 2D semiconductors and demonstrates their use in artificial synaptic transistors.


title: Non-Euclidean Contraction Theory for Robust Nonlinear Stability

abstract: We study necessary and sufficient conditions for contraction and incremental stability of dynamical systems with respect to non-Euclidean norms. First, we introduce weak pairings as a framework to study contractivity with respect to arbitrary norms, and characterize their properties. We introduce and study the sign and max pairings for the $\ell_1$ and $\ell_\infty$ norms, respectively. Using weak pairings, we establish five equivalent characterizations for contraction, including the one-sided Lipschitz condition for the vector field as well as matrix measure and Demidovich conditions for the corresponding Jacobian. Third, we extend our contraction framework in two directions: we prove equivalences for contraction of continuous vector fields and we formalize the weaker notion of equilibrium contraction, which ensures exponential convergence to an equilibrium. Finally, as an application, we provide (i) incremental input-to-state stability and finite input-state gain properties for contracting systems, and (ii) a general theorem about the Lipschitz interconnection of contracting systems, whereby the Hurwitzness of a gain matrix implies the contractivity of the interconnected system.


title: Active Flows and Deformable Surfaces in Development

abstract: We review progress in active hydrodynamic descriptions of flowing media on curved and deformable manifolds: the state-of-the-art in continuum descriptions of single-layers of epithelial and/or other tissues during development. First, after a brief overview of activity, flows and hydrodynamic descriptions, we highlight the generic challenge of identifying the dependence on dynamical variables of so-called active kinetic coefficients -- active counterparts to dissipative Onsager coefficients. We go on to describe some of the subtleties concerning how curvature and active flows interact, and the issues that arise when surfaces are deformable. We finish with a broad discussion around the utility of such theories in developmental biology. This includes limitations to analytical techniques, challenges associated with numerical integration, fitting-to-data and inference, and potential tools for the future, such as discrete differential geometry.


title: Landau Levels and van der Waals Interfaces of Acoustics in Moir\'e Phononic Lattices

abstract: Moir\'e lattices which consist of parallel but staggered periodic lattices have been extensively explored due to their salient physical properties, such as van Hove singularities[1, 2], commensurable incommensurable transitions[3], non-Abelian gauge potentials[4], fractional quantum Hall effects[5-7], van der Waals interfaces[8, 9] and unconventional superconductivity[10, 11]. However, there are limited demonstrations of such concepts for classical wave systems. Here, we realized gauge fields in one-dimensional Moir\'e phononic lattices consisting of two superimposed periodic patterns which mismatched with each other along one direction. Benefiting from gauge fields, we generated Landau level flat bands near the Dirac cone and experimentally measured their spatial localization in pressure-field distributions. Then, by mismatching lattices along both directions, we constructed two-dimensional Moir\'e phononic lattices with van der Waals interfaces. We found that acoustic waves efficiently transported along van der Waals interfaces behaving as metallic networks. As mismatched lattices are well-controllable, our study offers a novel path to manipulate sound waves which are inaccessible in traditional periodic acoustic systems, and can be easily extended to mechanics, optics, electromagnetics and electronics.


title: Deep Implicit Moving Least-Squares Functions for 3D Reconstruction

abstract: Point set is a flexible and lightweight representation widely used for 3D deep learning. However, their discrete nature prevents them from representing continuous and fine geometry, posing a major issue for learning-based shape generation. In this work, we turn the discrete point sets into smooth surfaces by introducing the well-known implicit moving least-squares (IMLS) surface formulation, which naturally defines locally implicit functions on point sets. We incorporate IMLS surface generation into deep neural networks for inheriting both the flexibility of point sets and the high quality of implicit surfaces. Our IMLSNet predicts an octree structure as a scaffold for generating MLS points where needed and characterizes shape geometry with learned local priors. Furthermore, our implicit function evaluation is independent of the neural network once the MLS points are predicted, thus enabling fast runtime evaluation. Our experiments on 3D object reconstruction demonstrate that IMLSNets outperform state-of-the-art learning-based methods in terms of reconstruction quality and computational efficiency. Extensive ablation tests also validate our network design and loss functions.


title: Continuous frames in Krein spaces

abstract: The purpose of this paper is to propose a definition of continuous frames of rank n for Krein spaces and to study their basic properties. Similarly to the Hilbert space case, continuous frames are characterized by the analysis, the pre-frame and the frame operator, where the latter gives rise to a frame decomposition theorem. The paper includes a discussion of similar, dual and Parseval frames and of reproducing kernels. In addition, the importance of the fundamental symmetry in the formula for the frame operator in a Krein space is clarified. As prime examples, it is shown how to transfer continuous frames for Hilbert spaces to Krein spaces arising from a possibly non-regular Gram operator.


title: Graph state representation of the toric code

abstract: Given their potential for fault-tolerant operations, topological quantum states are currently the focus of intense activity. Of particular interest are topological quantum error correction codes, such as the surface and planar stabilizer codes that are equivalent to the celebrated toric code. While every stabilizer state maps to a graph state under local Clifford operations, the graphs associated with topological stabilizer codes remain unknown. We show that the toric code graph is composed of only two kinds of subgraphs: star graphs (which encode Greenberger-Horne-Zeilinger states) and half graphs. The topological order is identified with the existence of multiple star graphs, which reveals a connection between the repetition and toric codes. The graph structure readily yields a log-depth quantum circuit for state preparation, assuming geometrically non-local gates, which can be reduced to a constant depth including ancillae and measurements at the cost of increasing the circuit width. The results provide a new graph-theoretic framework for the investigation of topological order and the development of novel topological error correction codes.


title: GelSlim3.0: High-Resolution Measurement of Shape, Force and Slip in a Compact Tactile-Sensing Finger

abstract: This work presents a new version of the tactile-sensing finger GelSlim 3.0, which integrates the ability to sense high-resolution shape, force, and slip in a compact form factor for use with small parallel jaw grippers in cluttered bin-picking scenarios. The novel design incorporates the capability to use real-time analytic methods to measure shape, estimate the contact 3D force distribution, and detect incipient slip. To achieve a compact integration, we optimize the optical path from illumination source to camera and other geometric variables in a optical simulation environment. In particular, we optimize the illumination sources and a light shaping lens around the constraints imposed by the photometric stereo algorithm used for depth reconstruction. The optimized optical configuration is integrated into a finger design composed of robust and easily replaceable snap-to-fit fingetip module that allow for ease of manufacture, assembly, use, and repair. To stimulate future research in tactile-sensing and provide the robotics community access to reliable and easily-reproducible tactile finger with a diversity of sensing modalities, we open-source the design and software at https://github.com/mcubelab/gelslim.


title: Dilated SpineNet for Semantic Segmentation

abstract: Scale-permuted networks have shown promising results on object bounding box detection and instance segmentation. Scale permutation and cross-scale fusion of features enable the network to capture multi-scale semantics while preserving spatial resolution. In this work, we evaluate this meta-architecture design on semantic segmentation - another vision task that benefits from high spatial resolution and multi-scale feature fusion at different network stages. By further leveraging dilated convolution operations, we propose SpineNet-Seg, a network discovered by NAS that is searched from the DeepLabv3 system. SpineNet-Seg is designed with a better scale-permuted network topology with customized dilation ratios per block on a semantic segmentation task. SpineNet-Seg models outperform the DeepLabv3/v3+ baselines at all model scales on multiple popular benchmarks in speed and accuracy. In particular, our SpineNet-S143+ model achieves the new state-of-the-art on the popular Cityscapes benchmark at 83.04% mIoU and attained strong performance on the PASCAL VOC2012 benchmark at 85.56% mIoU. SpineNet-Seg models also show promising results on a challenging Street View segmentation dataset. Code and checkpoints will be open-sourced.


title: Quantum Secure Multi-party Summation Based on entanglement swapping

abstract: In this paper, we present a quantum secure multi-party summation protocol, which allows multiple mutually distrustful parties to securely compute the summation of their secret data. In the presented protocol, a semitrusted third party is introduced to help multiple parties to achieve this secure task. Besides, the entanglement swapping of $d$-level cat states and Bell states is employed to securely transmit message between each party and the semitrusted third party. At last, its security against some common attacks is analyzed, which shows that the presented protocol is secure in theory.


title: Construction of explicit symplectic integrators in general relativity. III. Reissner-Nordstrom-(anti)-de Sitter black holes

abstract: We give a possible splitting method to a Hamiltonian for the description of charged particles moving around the Reissner-Nordstrom-(anti)-de Sitter black hole with an external magnetic field. This Hamiltonian can be separated into six analytical solvable pieces, whose solutions are explicit functions of proper time. In this case, second- and fourth-order explicit symplectic integrators are easily available. They exhibit excellent long-term behavior in maintaining the boundness of Hamiltonian errors regardless of ordered or chaotic orbits if appropriate step-sizes are chosen. Under some circumstances, an increase of positive cosmological constant gives rise to strengthening the extent of chaos from the global phase space; namely, chaos of charged particles occurs easily for the accelerated expansion of the universe. However, an increase of the magnitude of negative cosmological constant does not. The different contributions on chaos are because the cosmological constant acts as a repulsive force in the Reissner-Nordstrom-de Sitter black hole, but an attractive force in the Reissner-Nordstrom-anti-de Sitter black hole.

categories: gr-qc astro-ph.IM nlin.CD physics.comp-ph


title: An alternative reconstruction for WENO schemes with adaptive order

abstract: We propose an alternative reconstruction for weighted essentially non-oscillatory schemes with adaptive order (WENO-AO) for solving hyperbolic conservation laws. The alternative reconstruction has a more concise form than the original WENO-AO reconstruction. Moreover, it is a strictly convex combination of polynomials with unequal degrees. Numerical examples show that the alternative reconstruction maintains the accuracy and robustness of the WENO-AO schemes.


title: Bayesian inference for gravitational waves from binary neutron star mergers in third-generation observatories

abstract: Third-generation (3G) gravitational-wave detectors will observe thousands of coalescing neutron star binaries with unprecedented fidelity. Extracting the highest precision science from these signals is expected to be challenging owing to both high signal-to-noise ratios and long-duration signals. We demonstrate that current Bayesian inference paradigms can be extended to the analysis of binary neutron star signals without breaking the computational bank. We construct reduced order models for $\sim 90\,\mathrm{minute}$ long gravitational-wave signals, covering the observing band ($5-2048\,\mathrm{Hz}$), speeding up inference by a factor of $\sim 1.3\times 10^4$ compared to the calculation times without reduced order models. The reduced order models incorporate key physics including the effects of tidal deformability, amplitude modulation due to the Earth's rotation, and spin-induced orbital precession. We show how reduced order modeling can accelerate inference on data containing multiple, overlapping gravitational-wave signals, and determine the speedup as a function of the number of overlapping signals. Thus, we conclude that Bayesian inference is computationally tractable for the long-lived, overlapping, high signal-to-noise-ratio events present in 3G observatories.


title: Vacuum angle theta in a strongly interacting hidden sector and its effect

abstract: Introducing a vacuum angle $\theta_h$ in a strongly interacting hidden sector like QCD, we study how $\theta_h$ affects physical quantities in a scale invariant extension of the standard model with that hidden sector. In this model the dynamical chiral symmetry breaking occurs in the hidden sector and generates a scale $ \vert \langle {\bar q} q \rangle \vert $ which triggers electroweak symmetry breaking. We find that the expression for a vacuum expectation value of the Higgs field depends on $\theta_h$, while the condition which determines the Higgs particle mass does not. This model contains the hidden-sector pions $\pi^0$ and $\pi^{\pm}$ which are candidates for cold dark matter, and we find the mass difference between the hidden-sector $\pi^0$ and $\pi^{\pm}$ will not be negligible for $\theta_h \approx \pi$.


title: Large friction-high force fields limit for the nonlinear Vlasov--Poisson--Fokker--Planck system

abstract: We provide a quantitative asymptotic analysis for the nonlinear Vlasov--Poisson--Fokker--Planck system with a large linear friction force and high force-fields. The limiting system is a diffusive model with nonlocal velocity fields often referred to as aggregation-diffusion equations. We show that a weak solution to the Vlasov--Poisson--Fokker--Planck system strongly converges to a strong solution to the diffusive model. Our proof relies on the modulated macroscopic kinetic energy estimate based on the weak-strong uniqueness principle together with a careful analysis of the Poisson equation.


title: Conditional Training with Bounding Map for Universal Lesion Detection

abstract: Universal Lesion Detection (ULD) in computed tomography plays an essential role in computer-aided diagnosis. Promising ULD results have been reported by coarse-to-fine two-stage detection approaches, but such two-stage ULD methods still suffer from issues like imbalance of positive v.s. negative anchors during object proposal and insufficient supervision problem during localization regression and classification of the region of interest (RoI) proposals. While leveraging pseudo segmentation masks such as bounding map (BM) can reduce the above issues to some degree, it is still an open problem to effectively handle the diverse lesion shapes and sizes in ULD. In this paper, we propose a BM-based conditional training for two-stage ULD, which can (i) reduce positive vs. negative anchor imbalance via BM-based conditioning (BMC) mechanism for anchor sampling instead of traditional IoU-based rule; and (ii) adaptively compute size-adaptive BM (ABM) from lesion bounding box, which is used for improving lesion localization accuracy via ABMsupervised segmentation. Experiments with four state-of-the-art methods show that the proposed approach can bring an almost free detection accuracy improvement without requiring expensive lesion mask annotations.


title: Learning Comprehensive Motion Representation for Action Recognition

abstract: For action recognition learning, 2D CNN-based methods are efficient but may yield redundant features due to applying the same 2D convolution kernel to each frame. Recent efforts attempt to capture motion information by establishing inter-frame connections while still suffering the limited temporal receptive field or high latency. Moreover, the feature enhancement is often only performed by channel or space dimension in action recognition. To address these issues, we first devise a Channel-wise Motion Enhancement (CME) module to adaptively emphasize the channels related to dynamic information with a channel-wise gate vector. The channel gates generated by CME incorporate the information from all the other frames in the video. We further propose a Spatial-wise Motion Enhancement (SME) module to focus on the regions with the critical target in motion, according to the point-to-point similarity between adjacent feature maps. The intuition is that the change of background is typically slower than the motion area. Both CME and SME have clear physical meaning in capturing action clues. By integrating the two modules into the off-the-shelf 2D network, we finally obtain a Comprehensive Motion Representation (CMR) learning method for action recognition, which achieves competitive performance on Something-Something V1 & V2 and Kinetics-400. On the temporal reasoning datasets Something-Something V1 and V2, our method outperforms the current state-of-the-art by 2.3% and 1.9% when using 16 frames as input, respectively.


title: SelfExplain: A Self-Explaining Architecture for Neural Text Classifiers

abstract: We introduce SelfExplain, a novel self-explaining model that explains a text classifier's predictions using phrase-based concepts. SelfExplain augments existing neural classifiers by adding (1) a globally interpretable layer that identifies the most influential concepts in the training set for a given sample and (2) a locally interpretable layer that quantifies the contribution of each local input concept by computing a relevance score relative to the predicted label. Experiments across five text-classification datasets show that SelfExplain facilitates interpretability without sacrificing performance. Most importantly, explanations from SelfExplain show sufficiency for model predictions and are perceived as adequate, trustworthy and understandable by human judges compared to existing widely-used baselines.


title: Annotation of Chinese Predicate Heads and Relevant Elements

abstract: A predicate head is a verbal expression that plays a role as the structural center of a sentence. Identifying predicate heads is critical to understanding a sentence. It plays the leading role in organizing the relevant syntactic elements in a sentence, including subject elements, adverbial elements, etc. For some languages, such as English, word morphologies are valuable for identifying predicate heads. However, Chinese offers no morphological information to indicate words` grammatical roles. A Chinese sentence often contains several verbal expressions; identifying the expression that plays the role of the predicate head is not an easy task. Furthermore, Chinese sentences are inattentive to structure and provide no delimitation between words. Therefore, identifying Chinese predicate heads involves significant challenges. In Chinese information extraction, little work has been performed in predicate head recognition. No generally accepted evaluation dataset supports work in this important area. This paper presents the first attempt to develop an annotation guideline for Chinese predicate heads and their relevant syntactic elements. This annotation guideline emphasizes the role of the predicate as the structural center of a sentence. The design of relevant syntactic element annotation also follows this principle. Many considerations are proposed to achieve this goal, e.g., patterns of predicate heads, a flattened annotation structure, and a simpler syntactic unit type. Based on the proposed annotation guideline, more than 1,500 documents were manually annotated. The corpus will be available online for public access. With this guideline and annotated corpus, our goal is to broadly impact and advance the research in the area of Chinese information extraction and to provide the research community with a critical resource that has been lacking for a long time.


title: Coexistence of Strong and Weak Majorana Zero Modes in Anisotropic XY Spin Chain with Second-Neighbor Interaction

abstract: We theoretically investigate Majorana zero modes emerging in an anisotropic XY spin chain with second neighbor interactions. The spin chain is mathematically equivalent to the Kitaev chain composing of spinless fermions if only nearest-neighbor interactions are considered. Recent studies on the Kitaev chain with long-ranged interactions, have presented coexistence of several Majorana zero modes. Investigating the topological phase diagram of the anisotropic XY spin chain with second neighbor interactions, we find coexistence of several Majorana zero modes similar to the Kitaev chain. However, we confirm that one of zero modes is restricted into a Hilbert subspace. The mode is regarded as a so-called weak zero mode that should exhibit thermodynamical properties different from a (strong) zero mode appearing in the whole Hilbert space. Since the quantum statistics of spin is the same as a hard-core boson, we expect an experimental realization of the weak mode in not only quantum spin materials but also optical lattices for cold atom systems.


title: High-order implicit time integration scheme based on Pad\'e expansions

abstract: A single-step high-order implicit time integration scheme for the solution of transient and wave propagation problems is presented. It is constructed from the Pad\'e expansions of the matrix exponential solution of a system of first-order ordinary differential equations formulated in the state-space. A computationally efficient scheme is developed exploiting the techniques of polynomial factorization and partial fractions of rational functions, and by decoupling the solution for the displacement and velocity vectors. An important feature of the novel algorithm is that no direct inversion of the mass matrix is required. From the diagonal Pad\'e expansion of order $M$ a time-stepping scheme of order $2M$ is developed. Here, each elevation of the accuracy by two orders results in an additional system of real or complex sparse equations to be solved. These systems are comparable in complexity to the standard Newmark method, i.e., the effective system matrix is a linear combination of the static stiffness, damping, and mass matrices. It is shown that the second-order scheme is equivalent to Newmark's constant average acceleration method, often also referred to as trapezoidal rule. The proposed time integrator has been implemented in MATLAB using the built-in direct linear equation solvers. In this article, numerical examples featuring nearly one million degrees of freedom are presented. High-accuracy and efficiency in comparison with common second-order time integration schemes are observed. The MATLAB-implementation is available from the authors upon request or from the GitHub repository (to be added).


title: One conjecture on cut points of virtual links and the arrow polynomial of twisted links

abstract: Checkerboard framings are an extension of checkerboard colorings for virtual links. According to checkerboard framings, in 2017, Dye obtained an independent invariant of virtual links: the cut point number. Checkerboard framings and cut points can be used as a tool to extend other classical invariants to virtual links. We prove that one of the conjectures in Dye's paper is correct. Moreover, we analyze the connection and difference between checkerboard framing obtained from virtual link diagram by adapting cut points and twisted link diagram obtained from virtual link diagram by introducing bars. By adjusting the normalized arrow polynomial of virtual links, we generalize it to twisted links. And we show that it is an invariant for twisted link. Finally, we figure out three characteristics of the normalized arrow polynomial of a checkerboard colorable twisted link, which is a tool of detecting checkerboard colorability of a twisted link. The latter two characteristics are the same as in the case of checkerboard colorable virtual link diagram.


title: The first moment of quadratic twists of modular $L$-functions

abstract: We obtain an asymptotic formula with an error term $O(X^{\frac{1}{2} + \varepsilon})$ for the smoothed first moment of quadratic twists of modular $L$-functions. We also give a similar result for the smoothed first moment of the first derivative of quadratic twists of modular $L$-functions. The argument is largely based on Young's works (Acta Arith 138(1):73-99, 2009 and Selecta Math 19(2):509-543, 2013).


title: Spectral Networks and Non-abelianization

abstract: We generalize the non-abelianization of Gaiotto-Moore-Neitzke from the case of $SL(n)$ and $GL(n)$ to arbitrary reductive algebraic groups. This gives a map between a moduli space of certain $N$-shifted weakly $W$-equivariant $T$-local systems on an open subset of a cameral cover $\tilde{X}\rightarrow X$ to the moduli space of $G$-local systems on a punctured Riemann surface $X$. For classical groups, we give interpretations of these moduli spaces using spectral covers. Non-abelianization uses a set of lines on the Riemann surface $X$ called a spectral network, defined using a point in the Hitchin base. We show that these lines are related to trajectories of quadratic differentials on quotients of $\tilde{X}$. We use this to describe some of the generic behaviour of lines in a spectral network.


title: Automated Discovery of Real-Time Network Camera Data From Heterogeneous Web Pages

abstract: Reduction in the cost of Network Cameras along with a rise in connectivity enables entities all around the world to deploy vast arrays of camera networks. Network cameras offer real-time visual data that can be used for studying traffic patterns, emergency response, security, and other applications. Although many sources of Network Camera data are available, collecting the data remains difficult due to variations in programming interface and website structures. Previous solutions rely on manually parsing the target website, taking many hours to complete. We create a general and automated solution for aggregating Network Camera data spread across thousands of uniquely structured web pages. We analyze heterogeneous web page structures and identify common characteristics among 73 sample Network Camera websites (each website has multiple web pages). These characteristics are then used to build an automated camera discovery module that crawls and aggregates Network Camera data. Our system successfully extracts 57,364 Network Cameras from 237,257 unique web pages.


title: Optimising the selection of samples for robust lidar camera calibration

abstract: We propose a robust calibration pipeline that optimises the selection of calibration samples for the estimation of calibration parameters that fit the entire scene. We minimise user error by automating the data selection process according to a metric, called Variability of Quality (VOQ) that gives a score to each calibration set of samples. We show that this VOQ score is correlated with the estimated calibration parameter's ability to generalise well to the entire scene, thereby overcoming the overfitting problems of existing calibration algorithms. Our approach has the benefits of simplifying the calibration process for practitioners of any calibration expertise level and providing an objective measure of the quality for our calibration pipeline's input and output data. We additionally use a novel method of assessing the accuracy of the calibration parameters. It involves computing reprojection errors for the entire scene to ensure that the parameters are well fitted to all features in the scene. Our proposed calibration pipeline takes 90s, and obtains an average reprojection error of 1-1.2cm, with standard deviation of 0.4-0.5cm over 46 poses evenly distributed in a scene. This process has been validated by experimentation on a high resolution, software definable lidar, Baraja Spectrum-Scan; and a low, fixed resolution lidar, Velodyne VLP-16. We have shown that despite the vast differences in lidar technologies, our proposed approach manages to estimate robust calibration parameters for both. Our code and data set used for this paper are made available as open-source.


title: On a generalized Brauer group in mixed characteristic cases, II

abstract: As an extension of an author's previous paper, we prove the Gersten-type conjecture for the mod $p$ \'{e}tale motivic cohomology over a local ring of mixed characteristic $(0, p)$. We also prove the $\mathbb{P}^{1}$-homotopy invariance for the generalized Brauer group which is a genelization of a result due to Saltman in mixed characteristic cases.


title: Almost exact diagonal reflection symmetries and three-zero texture

abstract: In this paper, we consider a three-zero texture with diagonal reflection symmetries in the SM. The three-zero texture has two less assumptions ($(M_{u})_{11} , (M_{\nu})_{11} \neq 0$) than the universal four-zero texture of mass matrices $(M_{f})_{11} = (M_{f})_{13,31} = 0$ for $f = u,d,\nu, e$. The texture allows diagonal reflection symmetries to be almost exact and $d$\,-\,$e$ unification. They reproduce the CKM and MNS matrices with accuracies of $O(10^{-4})$ and $O(10^{-3})$. Some perturbative diagonalizations yield two relations with good accuracy for quark mass and mixing. Although this calculation is done in a special basis, it is a general result in a sense, because other textures and generalized $CP$ symmetries exist by some weak basis transformation. By assuming a $d$\,-\,$e$ unified relation ($M_{d} \sim M_{e}$), we obtain the lightest neutrino mass $m_{1} \simeq 2.12\, - \, 5.64\,$[meV] and the effective mass of the double beta decay $|m_{ee}| \simeq 1.23 - 2.15 \,$[meV].


title: Microstructure evolution under the space-time variational solidification conditions in a melt pool: A multi-scale simulation study

abstract: The properties of welded components are dominated by the microstructure evolution in the pool, where the solidification conditions are space-time variational. To represent the variational solidification conditions in the pool, the multi-scale simulation is carried out in this paper, combining the microscopic Phase-Field (PF) equations with the macroscopic thermal processes. Firstly, two different models, the GR model and TF model, are employed to simulate the single crystal solidification at a local region of the pool. Results suggest the TF model is more suitable to reflect the variational conditions than the GR model. Secondly, the single-crystal solidification and poly-crystal solidification at the whole region of the pool are performed through the TF model. The results demonstrate the space-time variabilities of the solidification conditions across the melt pool. Meanwhile, the variational conditions affect the microstructure evolution significantly, including the onset of initial instability at the epitaxial growth stage and the directional evolutions of the converging grain boundaries (GBs) and diverging GBs at the competitive growth stage. Moreover, the formation of axial grain structures is observed, which can be regarded as the competition between the grains along the axial direction and radial direction. This study indicates the necessity of considering the variational conditions in a pool. Meanwhile, the PF model can simulate microstructure evolution under the variational conditions accurately, which has a great potential for investigating solidification dynamics in the melt pool.


title: Characterising the Knowledge about Primitive Variables in Java Code Comments

abstract: Primitive types are fundamental components available in any programming language, which serve as the building blocks of data manipulation. Understanding the role of these types in source code is essential to write software. Little work has been conducted on how often these variables are documented in code comments and what types of knowledge the comments provide about variables of primitive types. In this paper, we present an approach for detecting primitive variables and their description in comments using lexical matching and advanced matching. We evaluate our approaches by comparing the lexical and advanced matching performance in terms of recall, precision, and F-score, against 600 manually annotated variables from a sample of GitHub projects. The performance of our advanced approach based on F-score was superior compared to lexical matching, 0.986 and 0.942, respectively. We then create a taxonomy of the types of knowledge contained in these comments about variables of primitive types. Our study showed that developers usually documented the variables' identifiers of a numeric data type with their purpose~(69.16%) and concept~(72.75%) more than the variables' identifiers of type String which were less documented with purpose~(61.14%) and concept~(55.46%). Our findings characterise the current state of the practice of documenting primitive variables and point at areas that are often not well documented, such as the meaning of boolean variables or the purpose of fields and local variables.


title: NDT-Transformer: Large-Scale 3D Point Cloud Localisation using the Normal Distribution Transform Representation

abstract: 3D point cloud-based place recognition is highly demanded by autonomous driving in GPS-challenged environments and serves as an essential component (i.e. loop-closure detection) in lidar-based SLAM systems. This paper proposes a novel approach, named NDT-Transformer, for realtime and large-scale place recognition using 3D point clouds. Specifically, a 3D Normal Distribution Transform (NDT) representation is employed to condense the raw, dense 3D point cloud as probabilistic distributions (NDT cells) to provide the geometrical shape description. Then a novel NDT-Transformer network learns a global descriptor from a set of 3D NDT cell representations. Benefiting from the NDT representation and NDT-Transformer network, the learned global descriptors are enriched with both geometrical and contextual information. Finally, descriptor retrieval is achieved using a query-database for place recognition. Compared to the state-of-the-art methods, the proposed approach achieves an improvement of 7.52% on average top 1 recall and 2.73% on average top 1% recall on the Oxford Robotcar benchmark.


title: Stochastic Reweighted Gradient Descent

abstract: Despite the strong theoretical guarantees that variance-reduced finite-sum optimization algorithms enjoy, their applicability remains limited to cases where the memory overhead they introduce (SAG/SAGA), or the periodic full gradient computation they require (SVRG/SARAH) are manageable. A promising approach to achieving variance reduction while avoiding these drawbacks is the use of importance sampling instead of control variates. While many such methods have been proposed in the literature, directly proving that they improve the convergence of the resulting optimization algorithm has remained elusive. In this work, we propose an importance-sampling-based algorithm we call SRG (stochastic reweighted gradient). We analyze the convergence of SRG in the strongly-convex case and show that, while it does not recover the linear rate of control variates methods, it provably outperforms SGD. We pay particular attention to the time and memory overhead of our proposed method, and design a specialized red-black tree allowing its efficient implementation. Finally, we present empirical results to support our findings.


title: Gradient Regularized Contrastive Learning for Continual Domain Adaptation

abstract: Human beings can quickly adapt to environmental changes by leveraging learning experience. However, adapting deep neural networks to dynamic environments by machine learning algorithms remains a challenge. To better understand this issue, we study the problem of continual domain adaptation, where the model is presented with a labelled source domain and a sequence of unlabelled target domains. The obstacles in this problem are both domain shift and catastrophic forgetting. We propose Gradient Regularized Contrastive Learning (GRCL) to solve the obstacles. At the core of our method, gradient regularization plays two key roles: (1) enforcing the gradient not to harm the discriminative ability of source features which can, in turn, benefit the adaptation ability of the model to target domains; (2) constraining the gradient not to increase the classification loss on old target domains, which enables the model to preserve the performance on old target domains when adapting to an in-coming target domain. Experiments on Digits, DomainNet and Office-Caltech benchmarks demonstrate the strong performance of our approach when compared to the other state-of-the-art methods.


title: The first photometric analysis of the totally eclipsing contact binary V811 Cep

abstract: The first photometric analysis of V811 Cep was carried out. The first complete light curves of V, R and I bands are given. The analysis was carried out by Wilson-Devinney (W-D) program, and the results show that V811 Cep is a median-contact binary ($f=33.9(\pm4.9)\%$) with a mass ratio of 0.285. It is a W-subtype contact binary, that is, the component with less mass is hotter than the component with more mass, and the light curves are asymmetric (O'Connell effect), which can be explained by the existence of a hot spot on the component with less mass. The orbital inclination is $i=88.3^{\circ}$, indicating that it is a totally eclipsing binary, so the parameters obtained are reliable. Through the O-C analyzing, it is found that the orbital period decreases at the rate of $\dot{P}=-3.90(\pm0.06)\times 10^{-7}d \cdot yr^{-1}$, which indicates that the mass transfer occurs from the more massive component to the less massive one.


title: Reconfigurable Intelligent Surface-Assisted MAC for Wireless Networks: Protocol Design, Analysis, and Optimization

abstract: Reconfigurable intelligent surface (RIS) is a promising reflective radio technology for improving the coverage and rate of future wireless systems by reconfiguring the wireless propagation environment. The current work mainly focuses on the physical layer design of RIS. However, enabling multiple devices to communicate with the assistance of RIS is a crucial challenging problem. Motivated by this, we explore RIS-assisted communications at the medium access control (MAC) layer and propose an RIS-assisted MAC framework. In particular, RISassisted transmissions are implemented by pre-negotiation and a multi-dimension reservation (MDR) scheme. Based on this, we investigate RIS-assisted single-channel multi-user (SCMU) communications. Wherein the RIS regarded as a whole unity can be reserved by one user to support the multiple data transmissions, thus achieving high efficient RIS-assisted connections at the user. Moreover, under frequency-selective channels, implementing the MDR scheme on the RIS group division, RISassisted multi-channel multi-user (MCMU) communications are further explored to improve the service efficiency of the RIS and decrease the computation complexity. Besides, a Markov chain is built based on the proposed RIS-assisted MAC framework to analyze the system performance of SCMU/MCMU. Then the optimization problem is formulated to maximize the overall system capacity of SCMU/MCMU with energy-efficient constraint. The performance evaluations demonstrate the feasibility and effectiveness of each


title: Adaptive Illumination based Depth Sensing using Deep Superpixel and Soft Sampling Approximation

abstract: Dense depth map capture is challenging in existing active sparse illumination based depth acquisition techniques, such as LiDAR. Various techniques have been proposed to estimate a dense depth map based on fusion of the sparse depth map measurement with the RGB image. Recent advances in hardware enable adaptive depth measurements resulting in further improvement of the dense depth map estimation. In this paper, we study the topic of estimating dense depth from depth sampling. The adaptive sparse depth sampling network is jointly trained with a fusion network of an RGB image and sparse depth, to generate optimal adaptive sampling masks. We show that such adaptive sampling masks can generalize well to many RGB and sparse depth fusion algorithms under a variety of sampling rates (as low as $0.0625\%$). The proposed adaptive sampling method is fully differentiable and flexible to be trained end-to-end with upstream perception algorithms.